Changing Position of Time & Date

Access the setup menu and move the cursor to POSITION, using the up/down button.

Keep pressing the set button until desired time & date position is achieved. Use the up/down button to move the cursor.

Alarm Text

The TEXT feature allows text to be displayed on screen when the camera PIR is in an alarm state. The text will only be displayed when used in conjunction with a Voltek PIR camera system.

To change the alarm text access the setup menu and move the cursor to TEXT, using the up/ down button. Press the set button and use the up/down button to change the text characters, and the set button to select the next character. There are 8 characters of text.

SPECIFICATION

Time & Date Generator

Operating Voltage 12V DC

Current Consumption

Operating Temperature 0º - 40º

Weatherproofing IP30 (indoor use only)

Size (Exc cables) 160mm x 130mm x 35mm

Total package weight 0.8kg

Carton size 315mm x 173mm x 63mm

Power Supply

Input Voltage

Output Voltage

Output Current

Weatherproofing

230V ac 50Hz

12V dc (regulated)

300mA (max)

IP30

(Indoor use only)

WARRANTY

This product has a 1 Year parts and labour warranty. In the unlikely event that you encounter a problem with this product, it should be returned, carriage paid, to the address shown below or to the place of purchase. Products covered by the warranty will be repaired free of charge. A small charge will be made for units not within the warranty.

TECHNICAL SUPPORT

If you have any questions regarding any of our products, please phone our helpline on 09066 191 133* .

INSTALLATION

INSTRUCTIONS

CT230 / 1883

Time & Date Generator

Thank you for purchasing the CT230 Time & Date Generator. Please read these instructions carefully before starting the installation.

This product can be used with your camera system in order to display the current time and date on the screen. This allows your video tapes to be automatically logged for future use.

PRODUCT FEATURES

12V dc operating voltage for simple and safe wiring.

Display can be moved around the screen to suit personal preferences.

Built in battery back up in case of power failure.

Simple push buttons allow full control of the product.

CONTENTS

Please check and identify all the parts before proceeding with the installation.

•

•

•

Time & Date Generator.

12V dc Power Supply

CT230 Scart lead.

39c Chirchill Way, Lomeshaye Ind. Est., Nelson, Lancashire. BB9 6RT. England.

Tel (01282) 695 500 Fax (01282) 695 511 International (+44 1282)

Email: [email protected] Website www.voltek.co.uk

*Helpline calls cost 60p/minute. Open 9am to 5pm, Mon to Fri.

Voltek reserves the right to change any product or

specification without notice

©

2002

CONNECTIONS

Phono Audio

Input

Phono Audio

Output

Voltek Camera

System Input

Power Supply

Input (12V DC)

Method 2

Connecting to other manufacturers camera with Scart connection

CT230 Scart lead

Camera Scart lead

Switch the power on and select your camera channel, you should now see the camera picture with the time and date inserted into the screen

Method 3

Connecting to other manufacturers camera with phono connection

Scart Input from camera

Phono Video

Input

Phono Video

Output

System Output

INSTALLATION

There are 3 different connection methods, please choose the appropriate method which best suits your requirements

Method 1

Connecting to a Voltek Camera

CT230 Scart lead

Camera Scart lead

Plug the RJ11 (telephone type connector) from the camera into the CAM in connector on the back of the CT230. The power is supplied to the Time & DateGenerator through the camera cable. There is no need for a seperate power supply directly into the unit. Switch the power on and select your camera channel, You should now see the camera picture with the time and date inserted into the screen.

CT230 Scart lead

Camera Phono lead

Plug the phono connectors into the A / V IN on the back of the CT230. Switch the power on and select your camera channel, you should now see the camera picture

with the time and date inserted into the screen

CHANGING THE SETTINGS

To access the setup menu press and hold the set button until the screen changes .

The setup menu should be displayed on the screen.

Changing Time & Date

Move the cursor to CLOCK SET using the up / down button. Press set

year should start flashing, use the up / down button to set the year.

Press the set button to select month, use the up/down button to set the month.

Press the set button to select day, use the up/down button to set the day.

Press the set button to select minutes, use the up/down button to set the minutes.

Press the set button to select hours, use the up/down button to set the hours.

Press the set button and the cursor should move to exit

Press set to leave the menu or use the up/down button to select other options within the menu.