9 03-12
9 03-12
1
9 03-12
SUBJECT
DATE
Installation of the Intake Throttle Valve and Adaptor
September 2012
Additions, Revisions, or Updates
Publication Number / Title
DDC-SVC-MAN-0083
Platform
Section Title
Change
EPA10/
GHG14
DD15/16
Installation of the Intake
Throttle Valve and
Adaptor
Added a new torque spec for mounting to a composite cold boost
pipe.
All information subject to change without notice.
9 03-12
Copyright © 2012 DETROIT DIESEL CORPORATION
3
2 Installation of the Intake Throttle Valve and Adaptor
2
Installation of the Intake Throttle Valve and Adaptor
Install as follows:
1. Insert four bolts through the (in order): bracket, adaptor, one of two new gaskets, the intake throttle valve, and then the
second of two new gaskets.
2. Install the assembly to the cold boost pipe (charge air pipe).
a. For an aluminum cold boost pipe, torque the four bolts to 30-38 N·m (22-28 lb·ft).
b. For a composite cold boost pipe, torque the four bolts to 24 N·m (18 lb·ft).
3. Install the intake air temperature sensor electrical harness connector.
4. Install the intake air throttle valve electrical harness connector.
5. Install the hose from adaptor inlet.
6. Install the clamp to the Charge Air Cooler (CAC) hose. Torque to 3.0-3.5 N·m (26-26.5 lb·in.).
4
All information subject to change without notice.
Copyright © 2012 DETROIT DIESEL CORPORATION
9 03-12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement