HMI Family Graphic Operation Terminals General overview

HMI Family Graphic Operation Terminals General overview
MITSUBISHI
ELECTRIC
Global partner. Local friend.
FACTORY AUTOMATION
HMI
Visualisation Tools
Powerful Communication
Simple Words and Pictures
EUROPEAN BRANCHES
EUROPEAN REPRESENTATIVES
MITSUBISHIELECTRICEUROPEB.V. CZECH REPUBLIC
Radlická 714/113a
CZ-158 00 Praha 5
Phone: +420 (0)251 551 470
MITSUBISHI ELECTRIC EUROPE B.V.
FRANCE
25, Boulevard des Bouvets
F-92741 Nanterre Cedex
Phone: +33 (0)1 / 55 68 55 68
MITSUBISHI ELECTRIC EUROPE B.V.
GERMANY
Gothaer Straße 8
D-40880 Ratingen
Phone: +49 (0)2102 / 486-0
MITSUBISHI ELECTRIC EUROPE B.V.
IRELAND
Westgate Business Park, Ballymount
IRL-Dublin 24
Phone: +353 (0)1 4198800
MITSUBISHI ELECTRIC EUROPE B.V.
ITALY
Viale Colleoni 7
I-20041 Agrate Brianza (MI)
Phone: +39 039 / 60 53 1
MITSUBISHI ELECTRIC EUROPE B.V.
SPAIN
Carretera de Rubí 76-80
E-08190 Sant Cugat del Vallés (Barcelona)
Phone: 902 131121 // +34 935653131
MITSUBISHI ELECTRIC EUROPE B.V.
UK
Travellers Lane
UK-Hatfield, Herts. AL10 8XB
Phone: +44 (0)1707 / 27 61 00
GEVA
AUSTRIA
Wiener Straße 89
AT-2500 Baden
Phone: +43 (0)2252 / 85 55 20
TEHNIKON
BELARUS
Oktyabrskaya 16/5, Off. 703-711
BY-220030 Minsk
Phone: +375 (0)17 / 210 46 26
ESCO D & A
BELGIUM
Culliganlaan 3
BE-1831 Diegem
Phone: +32 (0)2 / 717 64 30
Koning & Hartman b.v. BELGIUM
Woluwelaan 31
BE-1800 Vilvoorde
Phone: +32 (0)2 / 257 02 40
INEA BH d.o.o. BOSNIA AND HERZEG.
Aleja Lipa 56
BA-71000 Sarajevo
Phone: +387 (0)33 / 921 164
AKHNATON
BULGARIA
4 Andrej Ljapchev Blvd. Pb 21
BG-1756 Sofia
Phone: +359 (0)2 / 817 6004
INEA CR d.o.o.
CROATIA
Losinjska 4 a
HR-10000 Zagreb
Phone: +385 (0)1 / 36 940 - 01/ -02/ -03
MITSUBISHI
ELECTRIC
FACTORY AUTOMATION
AutoCont C.S. s.r.o. CZECH REPUBLIC
Technologická 374/6
CZ-708 00 Ostrava-Pustkovec
Phone: +420 595 691 150
B:TECH A.S.
CZECH REPUBLIC
U Borové 69
CZ-58001 Havlíčkův Brod
Phone: +420 (0)569 777 777
Beijer Electronics A/S
DENMARK
Lykkegårdsvej 17, 1.
DK-4000 Roskilde
Phone: +45 (0)46/ 75 76 66
BeijerElectronicsEestiOÜ
ESTONIA
Pärnu mnt.160i
EE-11317 Tallinn
Phone: +372 (0)6 / 51 81 40
Beijer Electronics OY
FINLAND
Jaakonkatu 2
FIN-01620 Vantaa
Phone: +358 (0)207 / 463 500
UTECO A.B.E.E.
GREECE
5, Mavrogenous Str.
GR-18542 Piraeus
Phone: +30 211 / 1206 900
MELTRADE Ltd.
HUNGARY
Fertő utca 14.
HU-1107 Budapest
Phone: +36 (0)1 / 431-9726
KAZPROMAUTOM.Ltd. KAZAKHSTAN
Mustafina Str. 7/2
KAZ-470046 Karaganda
Phone: +7 7212 / 50 11 50
Beijer Electronics SIA
LATVIA
Vestienas iela 2
LV-1035 Riga
Phone: +371 (0)784 / 2280
Beijer Electronics UAB
LITHUANIA
Savanoriu Pr. 187
LT-02300 Vilnius
Phone: +370 (0)5 / 232 3101
ALFATRADE Ltd.
MALTA
99, Paola Hill
Malta- Paola PLA 1702
Phone: +356 (0)21 / 697 816
INTEHSIS srl
MOLDOVA
bld. Traian 23/1
MD-2060 Kishinev
Phone: +373 (0)22 / 66 4242
HIFLEXAUTOM.B.V. NETHERLANDS
Wolweverstraat 22
NL-2984 CD Ridderkerk
Phone: +31 (0)180 – 46 60 04
Koning&Hartmanb.v. NETHERLANDS
Haarlerbergweg 21-23
NL-1101 CH Amsterdam
Phone: +31 (0)20 / 587 76 00
Beijer Electronics AS
NORWAY
Postboks 487
NO-3002 Drammen
Phone: +47 (0)32 / 24 30 00
MPL Technology Sp. z o.o. POLAND
Ul. Krakowska 50
PL-32-083 Balice
Phone: +48 (0)12 / 630 47 00
Sirius Trading & Services ROMANIA
Aleea Lacul Morii Nr. 3
RO-060841 Bucuresti, Sector 6
Phone: +40 (0)21 / 430 40 06
CraftCon.&Engineeringd.o.o. SERBIA
BulevarSvetogCaraKonstantina80-86
SER-18106 Nis
Phone:+381(0)18/292-24-4/5
INEA SR d.o.o.
SERBIA
Izletnicka 10
SER-113000 Smederevo
Phone: +381 (0)26 / 617 163
AutoCont Control s.r.o. SLOVAKIA
Radlinského 47
SK-02601 Dolny Kubin
Phone: +421 (0)43 / 5868210
CS MTrade Slovensko, s.r.o. SLOVAKIA
Vajanskeho 58
SK-92101 Piestany
Phone: +421 (0)33 / 7742 760
INEA d.o.o.
SLOVENIA
Stegne 11
SI-1000 Ljubljana
Phone: +386 (0)1 / 513 8100
Beijer Electronics AB
SWEDEN
Box 426
SE-20124 Malmö
Phone: +46 (0)40 / 35 86 00
Econotec AG
SWITZERLAND
Hinterdorfstr. 12
CH-8309 Nürensdorf
Phone: +41 (0)44 / 838 48 11
TURKEY
GTS
Bayraktar Bulvari Nutuk Sok. No:5
TR-34775 Yukari ISTANBUL
Phone: +90 (0)216 526 39 90
CSC Automation Ltd.
UKRAINE
4-B, M. Raskovoyi St.
UA-02660 Kiev
Phone: +380 (0)44 / 494 33 55
ILAN & GAVISH Ltd.
ISRAEL
24 Shenkar St., Kiryat Arie
IL-49001 Petah-Tiqva
Phone: +972 (0)3 / 922 18 24
CEG INTERNATIONAL
LEBANON
Cebaco Center/Block A Autostrade DORA
Lebanon - Beirut
Phone: +961 (0)1 / 240 430
CBI Ltd.
SOUTH AFRICA
Private Bag 2016
ZA-1600 Isando
Phone: + 27 (0)11 / 928 2000
Mitsubishi Electric Europe B.V. /// FA - European Business Group /// Gothaer Straße 8 /// D-40880 Ratingen /// Germany
Tel.: +49(0)2102-4860 /// Fax: +49(0)2102-4861120 /// [email protected] /// www.mitsubishi-automation.com
Specifications subject to change /// Art. no. 207075-C /// 10.2009
All trademarks and copyrights acknowledged.
System and Process Visualisation /// Touch Screen and Key Operation ///
Powerful Maintenance Tools /// PLC Program Display /// Direct MES
Integration /// HMIs /// GOTs /// IPCs /// SCADA /// Software ///
HMI /// GOT1000 /// E1000 /// IPC1000 /// HMI /// GOT1000 /// E1000 /// IPC1000 /// HMI /// GOT1000 /// E1000 /// IPC1000 /// HMI /// GOT1000 /// E1000 /// IPC1000 /// HMI /// GOT1000
Perfect Vision
More than a terminal
Advanced communication
High resolution screens offer bright
clear displays that can be viewed from
a wide range of angles.
With innovative technology Mitsubishi Electric has
created new standards in operator interaction. Features such as the ladder monitoring function enhance
and support the work of programmers, operators and
maintenance staff.
Advanced screen design software
such as GT Designer enable screens
to be quickly and efficiently created.
Direct Connection to a SQL database through a dedicated MES interface gives users greater access to operational data from across their entire plant – and all
from the shop floor.
Ultra-slim designs occupy less
panel space/depth.
100’s of drivers are available for
connection to Mitsubishi or other
third party products.
Simple configuration
All of the HMI software packages come with
pre-defined graphic libraries to help users get started
quickly. Some of the software programs also have simulators so that system operation can be checked
before downloading into an HMI or IPC.
Easier operation
Simple intuitive keyboards are complimented by flexible and dynamic touch screen solutions. Each type of
HMI solution allows data to be gathered from various
FA devices and facilitates its access as information
using powerful graphic and text tools.
Intelligent design
High performance, market leading, operator terminals
are the result of intelligent yet carefully planned
design. For example front mounted USB ports make
programming and data access simpler and quicker
than ever before.
Units with high IP ratings ensure easy
and carefree cleaning, especially
useful for situations that require full
wash downs.
More design freedom through flexible
connectivity and mounting as many
units can be used in portrait or
landscape configurations.
Reliable and economical
Ultra slim mounting as well as optional screen orientation make Mitsubishi HMI’s simple and economical to
add to almost any system. Conformance to shipping
approvals and standards are a clear demonstration of
Mitsubishi’s commitment to quality.
High-speed operation thanks to
fast processors.
Flexible operation allows Mitsubishi
HMIs to be used in industrial and
commercial applications.
2
3
HMI /// GOT1000 /// E1000 /// IPC1000 /// HMI /// GOT1000 /// E1000 /// IPC1000 /// HMI /// GOT1000 /// E1000 /// IPC1000 /// HMI /// GOT1000 /// E1000 /// IPC1000 /// HMI /// GOT1000
Perfect Vision
More than a terminal
Advanced communication
High resolution screens offer bright
clear displays that can be viewed from
a wide range of angles.
With innovative technology Mitsubishi Electric has
created new standards in operator interaction. Features such as the ladder monitoring function enhance
and support the work of programmers, operators and
maintenance staff.
Advanced screen design software
such as GT Designer enable screens
to be quickly and efficiently created.
Direct Connection to a SQL database through a dedicated MES interface gives users greater access to operational data from across their entire plant – and all
from the shop floor.
Ultra-slim designs occupy less
panel space/depth.
100’s of drivers are available for
connection to Mitsubishi or other
third party products.
Simple configuration
All of the HMI software packages come with
pre-defined graphic libraries to help users get started
quickly. Some of the software programs also have simulators so that system operation can be checked
before downloading into an HMI or IPC.
Easier operation
Simple intuitive keyboards are complimented by flexible and dynamic touch screen solutions. Each type of
HMI solution allows data to be gathered from various
FA devices and facilitates its access as information
using powerful graphic and text tools.
Intelligent design
High performance, market leading, operator terminals
are the result of intelligent yet carefully planned
design. For example front mounted USB ports make
programming and data access simpler and quicker
than ever before.
Units with high IP ratings ensure easy
and carefree cleaning, especially
useful for situations that require full
wash downs.
More design freedom through flexible
connectivity and mounting as many
units can be used in portrait or
landscape configurations.
Reliable and economical
Ultra slim mounting as well as optional screen orientation make Mitsubishi HMI’s simple and economical to
add to almost any system. Conformance to shipping
approvals and standards are a clear demonstration of
Mitsubishi’s commitment to quality.
High-speed operation thanks to
fast processors.
Flexible operation allows Mitsubishi
HMIs to be used in industrial and
commercial applications.
2
3
Interfaces between human and technology /// A complete line /// Interfaces between human and technology /// A complete line /// Interfaces between human and technology
Vision1000 – A Complete Line
Mitsubishi’s Vision 1000 concept brings
together a wide range of human machine
interfaces (HMIs) and software solutions
that let you see what is really happening in
the production process.
쐽 Open HMI solutions
The E1000 range of HMIs is designed and
built on the latest open technology combining Microsoft’s Windows CE platform
with Intel Xscale processors.
This combination of three visualization
technologies from a single manufacturer,
allows users to choose the best solution to
fit their requirements.
This leading edge technology delivers fast
and reliable operation ensuring maximum
uptime for HMI users.
쐽 Dedicated HMI solutions
The GOT1000 series of graphic operator
terminals provide the very latest in
touch-screen display technology. This
gives users a bright clear display of information with the flexibility of touch screen
input.
Central storage and control of FA device information with Mitsubishi HMIs
The GOT units are designed for fundamental integration with Mitsubishi automation
technology. This means easier, faster project development as well as increased system performance and additional access to
core functions in Mitsubishi’s automation
hardware.
Factory automation users want more transparency and more information on control
and machine processes.
In countless applications highly flexible
HMI and IPC units are an intelligent,
cost-effective alternative to bulky control
consoles. Both their size and their many
application advantages make them the
clearly superior choice.
The complete product range of the E series
Flexible software
solutions
A wide range of open HMI solutions
쐽 Industrial PC (IPC) solutions
Mitsubishi’s range of IPC1000 solutions
offer customers a robust platform for
developing their own solutions.They are
designed to provide the flexibility of highperformance PC power but with a sturdy
industrial design to protect them during
operation. This means users can install an
IPC1000 in their manufacturing environment with complete confidence.
A range of Mitsubishi automation software
called MELSOFT supports the IPCs. This
provides users with a choice of software
components that they can embed into
their own solution or complete visualization packages such as MX4SCADA.
In addition there are software support
packages for each of the HMI terminals.
They offer libraries of predefined functions
and images as well as an intuitive and flexible work environment.
MELSOFT is a wide range of software solutions
designed to optimize your plant productivity.
The GOT 1000 series utilises the latest touchscreen
technology
High performance industrial PCs
The complete product range of the GOT series
4
5
Interfaces between human and technology /// A complete line /// Interfaces between human and technology /// A complete line /// Interfaces between human and technology
Vision1000 – A Complete Line
Mitsubishi’s Vision 1000 concept brings
together a wide range of human machine
interfaces (HMIs) and software solutions
that let you see what is really happening in
the production process.
쐽 Open HMI solutions
The E1000 range of HMIs is designed and
built on the latest open technology combining Microsoft’s Windows CE platform
with Intel Xscale processors.
This combination of three visualization
technologies from a single manufacturer,
allows users to choose the best solution to
fit their requirements.
This leading edge technology delivers fast
and reliable operation ensuring maximum
uptime for HMI users.
쐽 Dedicated HMI solutions
The GOT1000 series of graphic operator
terminals provide the very latest in
touch-screen display technology. This
gives users a bright clear display of information with the flexibility of touch screen
input.
Central storage and control of FA device information with Mitsubishi HMIs
The GOT units are designed for fundamental integration with Mitsubishi automation
technology. This means easier, faster project development as well as increased system performance and additional access to
core functions in Mitsubishi’s automation
hardware.
Factory automation users want more transparency and more information on control
and machine processes.
In countless applications highly flexible
HMI and IPC units are an intelligent,
cost-effective alternative to bulky control
consoles. Both their size and their many
application advantages make them the
clearly superior choice.
The complete product range of the E series
Flexible software
solutions
A wide range of open HMI solutions
쐽 Industrial PC (IPC) solutions
Mitsubishi’s range of IPC1000 solutions
offer customers a robust platform for
developing their own solutions.They are
designed to provide the flexibility of highperformance PC power but with a sturdy
industrial design to protect them during
operation. This means users can install an
IPC1000 in their manufacturing environment with complete confidence.
A range of Mitsubishi automation software
called MELSOFT supports the IPCs. This
provides users with a choice of software
components that they can embed into
their own solution or complete visualization packages such as MX4SCADA.
In addition there are software support
packages for each of the HMI terminals.
They offer libraries of predefined functions
and images as well as an intuitive and flexible work environment.
MELSOFT is a wide range of software solutions
designed to optimize your plant productivity.
The GOT 1000 series utilises the latest touchscreen
technology
High performance industrial PCs
The complete product range of the GOT series
4
5
Graphical Operation Terminal /// GOT1000 /// Graphical Operation Terminal /// GOT1000 /// Graphical Operation Terminal /// GOT1000 /// Graphical Operation Terminal ///
GOT1000 – The Next Generation’s Vision
Powerful
technology
The GOT1000 series has been designed
with the needs of the user in mind. For
example:
쐽 Diagnostics functions
The GOT1000 series’ innovative error
reporting system ensures fast troubleshooting and minimum downtime. Predefined screens provide direct access to the
PLCs I/Os and even the buffer memory of
special-function modules.
Features such as alarm handling, historical
trending and memory areas for storing
help texts or bitmaps also contribute to
rapid troubleshooting and fault correction.
GOT HMI's can help users see what is happening anywhere in their process.
Seeing is believing
The touch-sensitive control screen, which
greatly facilitates data entry and parameter
editing, is one of the most popular features
of the GOT operator terminals. Many users
find the easy touch screen operation and
flexible use enhance their HMI projects.
Mitsubishi’s GOT series offers a wide range
of models from small 3-colour touch
screens to large TFT’s and handheld units.
In addition there are multiple system accessories that can add diverse capabilities
such as networking, camera inputs and
direct MES integration depending upon
the GOT unit selected.
쐽 Transparent Mode
GOT1000 units can also allow users to
download programs to the connected
Mitsubishi PLC through the existing connection established with the GOT display
unit.
In addition to the wide ranging support for
Mitsubishi PLC’s, frequency inverters and
servo amplifiers, GOT1000 series can also
be connected to an increasing range of
automation products from other manufacturers. This enables users to build a common visualization strategy for their
operation independently of the control
solution used.
Multilingual
Furthermore, support for Unicode 2.1
enables users to easily create multi-language displays in languages as diverse as
Russian and Japanese. This is especially
useful for companies who export
machines. It enables them to be easily
localized while still maintaining a core system for the manufacturers engineers to
maintain service and support.
Brilliant colours in high resolution
GOT1000
at a glance
쐽 Flexible program storage
The GOT units can be programmed with
the GT Works2 software package, which
runs on any Windows® compatible PC. Programs can be stored either in the control
unit’s integrated non-volatile RAM, in a
plug-in EPROM module or a CF card.
쐽 High resolution screens
High resolution screens, with up to 65,536
colours on selected GOT1000 units, can display complex graphics, photos, CAD drawings and even PDFs and office documents
such as MS Excel and WORD. This document flexibility allows the GOT to truly
become the shop floor information
resource as well as a data monitoring tool.
쐽 High-speed processing
A 64-bit RISC processor is combined with a
specially developed high-speed graphics
processor to make the GOT1000 units fast
and responsive to user inputs, changes in
data and display drawing times.
6
Versatile
Display:
From Monochrome LCD to STN
or TFT 65.536 colours
Resolution:
From 128 x 64 up to 1024 x 768
GOT1000 units can be used globally with their support for Unicode characters
Information sharing
An integrated server function allows the
monitoring and data collection of information by a remote personal computer. Error
information can also be checked and transmitted to the PC. This feature makes data
and system maintenance functions very
easy as there is no longer any need to visit
every factory to collect data or status information from every GOT.
Function keys:
GOT operation is made exclusively, precise,
and flexible on the touch-sensitive screen
with free programmable grafic function
keys. Mechanical keys are from yesterday,
the future belongs to grafic keys.
Networks capability:
Ethernet, CC-Link, MELSECNET/10*
Interface:
RS232C, RS422, RS485, USB*
*not available for all units
7
Graphical Operation Terminal /// GOT1000 /// Graphical Operation Terminal /// GOT1000 /// Graphical Operation Terminal /// GOT1000 /// Graphical Operation Terminal ///
GOT1000 – The Next Generation’s Vision
Powerful
technology
The GOT1000 series has been designed
with the needs of the user in mind. For
example:
쐽 Diagnostics functions
The GOT1000 series’ innovative error
reporting system ensures fast troubleshooting and minimum downtime. Predefined screens provide direct access to the
PLCs I/Os and even the buffer memory of
special-function modules.
Features such as alarm handling, historical
trending and memory areas for storing
help texts or bitmaps also contribute to
rapid troubleshooting and fault correction.
GOT HMI's can help users see what is happening anywhere in their process.
Seeing is believing
The touch-sensitive control screen, which
greatly facilitates data entry and parameter
editing, is one of the most popular features
of the GOT operator terminals. Many users
find the easy touch screen operation and
flexible use enhance their HMI projects.
Mitsubishi’s GOT series offers a wide range
of models from small 3-colour touch
screens to large TFT’s and handheld units.
In addition there are multiple system accessories that can add diverse capabilities
such as networking, camera inputs and
direct MES integration depending upon
the GOT unit selected.
쐽 Transparent Mode
GOT1000 units can also allow users to
download programs to the connected
Mitsubishi PLC through the existing connection established with the GOT display
unit.
In addition to the wide ranging support for
Mitsubishi PLC’s, frequency inverters and
servo amplifiers, GOT1000 series can also
be connected to an increasing range of
automation products from other manufacturers. This enables users to build a common visualization strategy for their
operation independently of the control
solution used.
Multilingual
Furthermore, support for Unicode 2.1
enables users to easily create multi-language displays in languages as diverse as
Russian and Japanese. This is especially
useful for companies who export
machines. It enables them to be easily
localized while still maintaining a core system for the manufacturers engineers to
maintain service and support.
Brilliant colours in high resolution
GOT1000
at a glance
쐽 Flexible program storage
The GOT units can be programmed with
the GT Works2 software package, which
runs on any Windows® compatible PC. Programs can be stored either in the control
unit’s integrated non-volatile RAM, in a
plug-in EPROM module or a CF card.
쐽 High resolution screens
High resolution screens, with up to 65,536
colours on selected GOT1000 units, can display complex graphics, photos, CAD drawings and even PDFs and office documents
such as MS Excel and WORD. This document flexibility allows the GOT to truly
become the shop floor information
resource as well as a data monitoring tool.
쐽 High-speed processing
A 64-bit RISC processor is combined with a
specially developed high-speed graphics
processor to make the GOT1000 units fast
and responsive to user inputs, changes in
data and display drawing times.
6
Versatile
Display:
From Monochrome LCD to STN
or TFT 65.536 colours
Resolution:
From 128 x 64 up to 1024 x 768
GOT1000 units can be used globally with their support for Unicode characters
Information sharing
An integrated server function allows the
monitoring and data collection of information by a remote personal computer. Error
information can also be checked and transmitted to the PC. This feature makes data
and system maintenance functions very
easy as there is no longer any need to visit
every factory to collect data or status information from every GOT.
Function keys:
GOT operation is made exclusively, precise,
and flexible on the touch-sensitive screen
with free programmable grafic function
keys. Mechanical keys are from yesterday,
the future belongs to grafic keys.
Networks capability:
Ethernet, CC-Link, MELSECNET/10*
Interface:
RS232C, RS422, RS485, USB*
*not available for all units
7
Human Machine Interface /// E1000 /// Human Machine Interface /// E1000 /// Human Machine Interface /// E1000 /// Human Machine Interface /// E1000 /// Human Machine Interfa
E1000 – Open HMI Technology
Features that
users value
The E1000 units have a long history of pioneering HMI design. Over many years
development and the accumulated experience of thousands of users has sharpened
these HMIs to become the leading edge
products many users are now familiar with.
Features that have remained the keystone
of this success include:
쐽 Multi-language support
All the E1000 units support multi-language
applications created within the programming software. These applications allow
the operators to select the user interface
language they wish to use as Unicode is
supported.
E1000 is designed to give a window into the manufacturing process.
A modern-day
control center
쐽 Dual driver support
All E series operator terminals can access
two different systems simultaneously acting as a protocol converter or as an information gateway. This has enabled many
users to create systems that span many
third party automation products that would
not normally be possible.
This functionality is supported both on the
standard RS232C and RS422 ports and via
the extended Profibus/DP and Ethernet
interfaces. For example, you can write data
words from a PLC directly into the parameter settings of a frequency inverter.
E1000
at a glance
Display:
From Monochrome LCD to STN
or TFT 65.536 colours
In addition, by using E1000 utilities and
tools, remote “viewing” of the locally displayed screen is also possible across an
intranet or internet connection making
sure you know exactly what is going on at a
machine level.
Resolution:
From 16 x 2 up to 80 x 60 char
(1024 x 768)
Function keys:
From 4 to 50
(physical or touch screen)
High performance
design
By combining the latest Intel XScale RISC
processor with 32 MB of Strataflash and
64 MB RAM, the E1000 not only offers high
performance while running Windows
CE.NET but also security and “peace of
mind“.
With this powerful combination of technology valuable production data and machine
operational information is protected even
if a power failure occurs during a file write
process.
Mitsubishi’s E1000 series of HMIs offer
operator display solutions from small easy
text displays to large multi-colour, high resolution, graphic displays with touch screen.
These practical operator terminals can
often replace an entire control console.
They enable an operator to manage and if
need be intervene in the application by
very easily changing the process data
parameters. The units in the E1000 series
perfectly match the MELSEC range of controllers and are very simple to operate.
Networks capability:
Profibus/DP, Ethernet*
Data management
Data storage and sharing are important
functions of the manufacturing process
and operator terminals are quickly becoming the gateway to that data. The E1000
series makes access to data easier and
more flexible than ever before. Users can
choose between the use of:
Interface:
RS232C, RS422, RS485, USB
*not available for all units
쐽 Combined Ethernet – internet connectivity for factory wide or global access
to data.
쐽 Direct connection to a modem for simple remote telemetry
solution
(GSM/GPRS/PSTN) where a system may
be installed at an inaccessible location.
쐽 A new external CF data card interface
on the front of the E1000 also means
data can be “taken” away on a removable data card for safe/permanent storage and processing.
쐽 Local printing directly from the HMI
display is also possible where a local
hard copy of processed data is
required.
The E1000 series operator terminals provide a huge leap forward in display technology, as ergonomics and ease of use
were central to the new series design. The
E1000 proves again how open HMI technology can be the key to integrated automation.
High performance in the most demanding applications
Highly compatible
8
9
Human Machine Interface /// E1000 /// Human Machine Interface /// E1000 /// Human Machine Interface /// E1000 /// Human Machine Interface /// E1000 /// Human Machine Interfa
E1000 – Open HMI Technology
Features that
users value
The E1000 units have a long history of pioneering HMI design. Over many years
development and the accumulated experience of thousands of users has sharpened
these HMIs to become the leading edge
products many users are now familiar with.
Features that have remained the keystone
of this success include:
쐽 Multi-language support
All the E1000 units support multi-language
applications created within the programming software. These applications allow
the operators to select the user interface
language they wish to use as Unicode is
supported.
E1000 is designed to give a window into the manufacturing process.
A modern-day
control center
쐽 Dual driver support
All E series operator terminals can access
two different systems simultaneously acting as a protocol converter or as an information gateway. This has enabled many
users to create systems that span many
third party automation products that would
not normally be possible.
This functionality is supported both on the
standard RS232C and RS422 ports and via
the extended Profibus/DP and Ethernet
interfaces. For example, you can write data
words from a PLC directly into the parameter settings of a frequency inverter.
E1000
at a glance
Display:
From Monochrome LCD to STN
or TFT 65.536 colours
In addition, by using E1000 utilities and
tools, remote “viewing” of the locally displayed screen is also possible across an
intranet or internet connection making
sure you know exactly what is going on at a
machine level.
Resolution:
From 16 x 2 up to 80 x 60 char
(1024 x 768)
Function keys:
From 4 to 50
(physical or touch screen)
High performance
design
By combining the latest Intel XScale RISC
processor with 32 MB of Strataflash and
64 MB RAM, the E1000 not only offers high
performance while running Windows
CE.NET but also security and “peace of
mind“.
With this powerful combination of technology valuable production data and machine
operational information is protected even
if a power failure occurs during a file write
process.
Mitsubishi’s E1000 series of HMIs offer
operator display solutions from small easy
text displays to large multi-colour, high resolution, graphic displays with touch screen.
These practical operator terminals can
often replace an entire control console.
They enable an operator to manage and if
need be intervene in the application by
very easily changing the process data
parameters. The units in the E1000 series
perfectly match the MELSEC range of controllers and are very simple to operate.
Networks capability:
Profibus/DP, Ethernet*
Data management
Data storage and sharing are important
functions of the manufacturing process
and operator terminals are quickly becoming the gateway to that data. The E1000
series makes access to data easier and
more flexible than ever before. Users can
choose between the use of:
Interface:
RS232C, RS422, RS485, USB
*not available for all units
쐽 Combined Ethernet – internet connectivity for factory wide or global access
to data.
쐽 Direct connection to a modem for simple remote telemetry
solution
(GSM/GPRS/PSTN) where a system may
be installed at an inaccessible location.
쐽 A new external CF data card interface
on the front of the E1000 also means
data can be “taken” away on a removable data card for safe/permanent storage and processing.
쐽 Local printing directly from the HMI
display is also possible where a local
hard copy of processed data is
required.
The E1000 series operator terminals provide a huge leap forward in display technology, as ergonomics and ease of use
were central to the new series design. The
E1000 proves again how open HMI technology can be the key to integrated automation.
High performance in the most demanding applications
Highly compatible
8
9
Industrial PCs /// IPC1000 /// Industrial PCs /// IPC1000 /// Industrial PCs /// IPC1000 /// Software package GT Works /// GT Soft /// GT Designer /// Software package GT Works /// GT W
IPC1000 –
Industrial PCs
GT Works –
A Complete Software Suite
쐽 The economical solution
Not all applications require full PC expansion and processing. This is exactly where
the IPCs of the MicroClient series are in a
class of their own. These ultra compact
Panel PCs provide basic PC operation and
offer a choice of 12.1” and 15” displays. The
MicroClient solution provides entry level
PC power and rugged design all for a budget price.
For reducing the unit size and removing
one of the major moving parts that could
fail, the MicroClient panels are also
designed to operate without a cooling fan.
Industrial PCs are especially contructed for heavy-duty industrial applications
IPC or HMI?
GT Works is a single software environment
that can be used to develop screen
designs/content for either a PC/IPC or a traditional hardware unit such as the
GOT1000 series.
This flexibility from a single design tool
means reduced cost of ownership as users
only have to learn one software tool. In
addition there is a greater re-use of existing
projects.
쐽 Full processing power
Mitsubishi’s V-Panel Express series provides
all of the traditional PC flexibility users
expect. Expandable configurations including up to 2 PCI cards and a choice of 15” or
17” displays mean users can tailor their IPC
to their own requirements. The V-Panel
Express series does not need a cooling fan.
GT Works
GT Works, comprehensive yet flexible
One project
2 targets
The Mitsubishi’s Industrial PC (IPC) range is
ruggedly designed for heavy duty industrial applications and environments. These
PCs feature high quality, fast performance,
attractive design and brilliantly legible displays. They are ideal as process visualisation platforms, particularly in combination
with the GT SoftGOT1000 and SCADA software packages.
Rugged and industrial in design and performance with
GT SoftGOT1000 and SCADA
When your requirements exceed the limits
of a traditional HMI control unit, you need a
PC-based system.
Compact yet
powerful
The new IPC1000 Series terminals are available in two basic formats, the MicroClient
series and the fully featured V-Panel
Express series.
쐽 Rugged design
A wide operating and storage temperature
range, tough vibration resistance and high
IP ratings mean Mitsubishi’s IPCs can be
used in many locations.
10
IPC1000
at a glance
Display:
TFT from 12.1” to 17” touch screen
Resolution:
From 800 x 600 up to 1280 x 1024
Processor:
Intel Celeron or Celeron M
Basic memory:
512 MB (RAM)
Built in harddisk:
40 GB
Interfaces*:
1 x RS232C, 1 to 5 x USB 2.0,
1 x 10/100 MBaud Ethernet,
1 x 1000 MBaud Ethernet (only V-Panel
Express)
*not available for all units
High function,
easy to use
GT Works offers a comprehensive library of
graphical elements that enable users of any
skill level to quickly create the screen
designs they need.
GOT1000
IPC with
SoftGOT
Flexible project targeting
All in one
GT Works is a multi tool software solution
which include:
쐽 GT Designer
This is the core design and development
software.
쐽 GT Simulator
A simulation package that allows users to
simulate their projects operation as if it
were really installed on a GOT1000.
쐽 GT SoftGOT1000
A PC based HMI environment that allows
users to deploy their created HMI screen
directly to a PC or IPC.
Integrated wizards, user-friendly menus
and helpful dialog boxes enable users to
set-up projects, complete security settings
and change language settings with a minimum of fuss.
GT Designer has a comprehensive graphic library.
Advanced simulation
Debugging and commissioning can be an
expensive and time consuming activity.
However, with GT Works the integrated
simulation software allows users to check
the function and operation of their screen
designs without any additional hardware.
This can significantly help reduce costs and
development time.
In addition if GX Developer and GX Simulator are also used then the combined PLC
and HMI solution can be tested and
debugged even before any electrical panels have been purchased or even wired.
11
Industrial PCs /// IPC1000 /// Industrial PCs /// IPC1000 /// Industrial PCs /// IPC1000 /// Software package GT Works /// GT Soft /// GT Designer /// Software package GT Works /// GT W
IPC1000 –
Industrial PCs
GT Works –
A Complete Software Suite
쐽 The economical solution
Not all applications require full PC expansion and processing. This is exactly where
the IPCs of the MicroClient series are in a
class of their own. These ultra compact
Panel PCs provide basic PC operation and
offer a choice of 12.1” and 15” displays. The
MicroClient solution provides entry level
PC power and rugged design all for a budget price.
For reducing the unit size and removing
one of the major moving parts that could
fail, the MicroClient panels are also
designed to operate without a cooling fan.
Industrial PCs are especially contructed for heavy-duty industrial applications
IPC or HMI?
GT Works is a single software environment
that can be used to develop screen
designs/content for either a PC/IPC or a traditional hardware unit such as the
GOT1000 series.
This flexibility from a single design tool
means reduced cost of ownership as users
only have to learn one software tool. In
addition there is a greater re-use of existing
projects.
쐽 Full processing power
Mitsubishi’s V-Panel Express series provides
all of the traditional PC flexibility users
expect. Expandable configurations including up to 2 PCI cards and a choice of 15” or
17” displays mean users can tailor their IPC
to their own requirements. The V-Panel
Express series does not need a cooling fan.
GT Works
GT Works, comprehensive yet flexible
One project
2 targets
The Mitsubishi’s Industrial PC (IPC) range is
ruggedly designed for heavy duty industrial applications and environments. These
PCs feature high quality, fast performance,
attractive design and brilliantly legible displays. They are ideal as process visualisation platforms, particularly in combination
with the GT SoftGOT1000 and SCADA software packages.
Rugged and industrial in design and performance with
GT SoftGOT1000 and SCADA
When your requirements exceed the limits
of a traditional HMI control unit, you need a
PC-based system.
Compact yet
powerful
The new IPC1000 Series terminals are available in two basic formats, the MicroClient
series and the fully featured V-Panel
Express series.
쐽 Rugged design
A wide operating and storage temperature
range, tough vibration resistance and high
IP ratings mean Mitsubishi’s IPCs can be
used in many locations.
10
IPC1000
at a glance
Display:
TFT from 12.1” to 17” touch screen
Resolution:
From 800 x 600 up to 1280 x 1024
Processor:
Intel Celeron or Celeron M
Basic memory:
512 MB (RAM)
Built in harddisk:
40 GB
Interfaces*:
1 x RS232C, 1 to 5 x USB 2.0,
1 x 10/100 MBaud Ethernet,
1 x 1000 MBaud Ethernet (only V-Panel
Express)
*not available for all units
High function,
easy to use
GT Works offers a comprehensive library of
graphical elements that enable users of any
skill level to quickly create the screen
designs they need.
GOT1000
IPC with
SoftGOT
Flexible project targeting
All in one
GT Works is a multi tool software solution
which include:
쐽 GT Designer
This is the core design and development
software.
쐽 GT Simulator
A simulation package that allows users to
simulate their projects operation as if it
were really installed on a GOT1000.
쐽 GT SoftGOT1000
A PC based HMI environment that allows
users to deploy their created HMI screen
directly to a PC or IPC.
Integrated wizards, user-friendly menus
and helpful dialog boxes enable users to
set-up projects, complete security settings
and change language settings with a minimum of fuss.
GT Designer has a comprehensive graphic library.
Advanced simulation
Debugging and commissioning can be an
expensive and time consuming activity.
However, with GT Works the integrated
simulation software allows users to check
the function and operation of their screen
designs without any additional hardware.
This can significantly help reduce costs and
development time.
In addition if GX Developer and GX Simulator are also used then the combined PLC
and HMI solution can be tested and
debugged even before any electrical panels have been purchased or even wired.
11
Software Packages /// E-Designer /// Software Packages /// E-Designer /// Software Packages /// MX4 - SCADA /// Software Packages /// MX4 - SCADA /// Software Packages /// MX4
E-Designer –
Clear, Simple, Easy
MX4 –
SCADA and HMI in Harmony
This is complimented by a library of
ready-to-use symbols and objects which
speed up screen design and creation.
Multilingual projects
Users who export control systems with
local language displays will find E-Designers multilingual project support a big benefit. Up to ten screen languages can be
loaded in to a small database allowing
operators to switch between any loaded
languages. All text blocks from the database can be easily exported and imported
with the Application Languages Manager.
Increase your Return On Assets (ROA) with
MX4 SCADA, delivering scalable, flexible
and reliable control and monitoring systems that reduce your operating costs and
improve productivity. A fully integrated
package, MX4 SCADA’s easy-to use configuration tools and powerful features enable
you to quickly develop and deploy solutions which can handle the most complex
requirements for any size enterprise.
Multi driver support
Communication drivers for all MELSEC PLCs
and many third-party PLCs are available as
standard. These can be updated online via
the Internet without exiting E-Designer.
Powerful software that enhances your productivity
Clear and powerul communication for all levels of
application
The E-Designer software helps users to
quickly start creating screen designs for
use on MAC E and E1000 terminal units.
Its intuative design excellently supports
new users but also enhances the productivity of experienced users.
Dual driver technology
Ease of use
E-Designer has many features designed to
improve the working process, for example
the software’s Block Manager gives a complete graphical overview of a project, making project management and debugguing
easier and quicker.
Scalable, flexible, reliable
Simultaneous connection using dual driver technology
쐽 Tailored solutions
MX4 SCADA ‘s exceptional flexibility maximizes your productivity by allowing user to
create optimal system architectures in the
way that best suits them -giving access to
both centralised and distributed processing.
쐽 Scalable solutions
Based on Microsoft technologies, MX4
SCADA has been designed with an innovative, scalable architecture. This preserves
your initial investment by allowing your
system to grow with your requirements,
without modifying system hardware or
software.
쐽 Reliable and redundant solutions
MX4 SCADA minimizes downtime by offering unrivalled reliability. It utilizes DCS
style, built-in, redundancy that can tolerate
system failures anywhere with no loss of
functionality or performance.
쐽 Business benefits
Integrating MX4 with business systems lets
users maximise productivity, improve
product quality and reduce both maintenance and operating costs.
쐽 Free development package
MX4 is available as a free development
package, which helps to reduce the cost of
usage. Key features include graphical process visualisation, historical/real time
trending and advanced alarming and
reporting.
쐽 Simple to configure
A full set of user expandable libraries with
graphics symbols and templates are
included.
There are also other time saving features
such as express Wizards for PLC communications, Genies for configuration of complex animation objects and Super Genies
for repetitive plant processes.
The installation procedure is customisable
and totally scalable - simply upgraded with
a new software key. It is also fully compatible with MX4 HMI. FastLinx is included with
MX4 for fast and simple interfacing to
MELSEC PLCs.
Intuative operation aids quick project creation
12
13
Software Packages /// E-Designer /// Software Packages /// E-Designer /// Software Packages /// MX4 - SCADA /// Software Packages /// MX4 - SCADA /// Software Packages /// MX4
E-Designer –
Clear, Simple, Easy
MX4 –
SCADA and HMI in Harmony
This is complimented by a library of
ready-to-use symbols and objects which
speed up screen design and creation.
Multilingual projects
Users who export control systems with
local language displays will find E-Designers multilingual project support a big benefit. Up to ten screen languages can be
loaded in to a small database allowing
operators to switch between any loaded
languages. All text blocks from the database can be easily exported and imported
with the Application Languages Manager.
Increase your Return On Assets (ROA) with
MX4 SCADA, delivering scalable, flexible
and reliable control and monitoring systems that reduce your operating costs and
improve productivity. A fully integrated
package, MX4 SCADA’s easy-to use configuration tools and powerful features enable
you to quickly develop and deploy solutions which can handle the most complex
requirements for any size enterprise.
Multi driver support
Communication drivers for all MELSEC PLCs
and many third-party PLCs are available as
standard. These can be updated online via
the Internet without exiting E-Designer.
Powerful software that enhances your productivity
Clear and powerul communication for all levels of
application
The E-Designer software helps users to
quickly start creating screen designs for
use on MAC E and E1000 terminal units.
Its intuative design excellently supports
new users but also enhances the productivity of experienced users.
Dual driver technology
Ease of use
E-Designer has many features designed to
improve the working process, for example
the software’s Block Manager gives a complete graphical overview of a project, making project management and debugguing
easier and quicker.
Scalable, flexible, reliable
Simultaneous connection using dual driver technology
쐽 Tailored solutions
MX4 SCADA ‘s exceptional flexibility maximizes your productivity by allowing user to
create optimal system architectures in the
way that best suits them -giving access to
both centralised and distributed processing.
쐽 Scalable solutions
Based on Microsoft technologies, MX4
SCADA has been designed with an innovative, scalable architecture. This preserves
your initial investment by allowing your
system to grow with your requirements,
without modifying system hardware or
software.
쐽 Reliable and redundant solutions
MX4 SCADA minimizes downtime by offering unrivalled reliability. It utilizes DCS
style, built-in, redundancy that can tolerate
system failures anywhere with no loss of
functionality or performance.
쐽 Business benefits
Integrating MX4 with business systems lets
users maximise productivity, improve
product quality and reduce both maintenance and operating costs.
쐽 Free development package
MX4 is available as a free development
package, which helps to reduce the cost of
usage. Key features include graphical process visualisation, historical/real time
trending and advanced alarming and
reporting.
쐽 Simple to configure
A full set of user expandable libraries with
graphics symbols and templates are
included.
There are also other time saving features
such as express Wizards for PLC communications, Genies for configuration of complex animation objects and Super Genies
for repetitive plant processes.
The installation procedure is customisable
and totally scalable - simply upgraded with
a new software key. It is also fully compatible with MX4 HMI. FastLinx is included with
MX4 for fast and simple interfacing to
MELSEC PLCs.
Intuative operation aids quick project creation
12
13
Visualisation and productivity /// Visualisation and productivity /// Automation solutions /// Automation solutions /// Automation solutions /// Automation solutions /// Automation
Visualisation
and productivity
A world of
automation solutions
Remote I/Os
Filling tubes
Motion control and servos
Inverters
LV circuit protection
The Business Cycle
Transport
conveyor (OUT)
Laser machines
Pressure
storage tank
Rotational
conveyor
Transport
conveyor (IN)
Frequency Inverter
PLC
Local HMI, plant
wide information
HMI technology can easily consolidate information at one point.
The use of HMI technology has been
increasing as manufacturers increasingly
demand information in realtime. The
boundries between “shop floor” data and
business operation/process data is fast
becoming blurred and places higher
demands on visualisation and data processing tools to span the wide range of
“new” applications.
New challenges
Using visualisation tools to support maintenance has never been high on the
agenda of machine and process engineers,
but if system downtime is considered as
one of the most costly problems manufacturers face, then why not? HMI screen’s can
be configured to easily report on all of the
critical control aspects of a system aiding
efficient problem diagnosis.
14
Robots
In fact some HMIs have the ability to report
errors remotely, even contacting the maintenance team before the line operators are
aware there is a problem. The potential of
visualisation tools to improve process
“uptime” is enormous.
Servo amplifiers
Enterprise PC
(MES/ERP/SCADA)
Fast data retrieval, greater transparency
require simplier and more effiecient control architectures. Because of this the
demand for high reliability SCADA and PC
based solutions is critical especially when
feeding data in to a businesses central MES
and ERP systems. But even now it is possible to see a future trend for embeding
direct MES functionality in to PLC stations
and high function HMIs. This can provide
huge gains for the manufacturer, i.e.;
reducing system complexity by removing a
layer of intermedary PCs; increased data
security by providing quicker respose and
industrialised hardware; localised control
points giving increased access to vital information.
[email protected]
As a manufacturer and supplier of automation products Mitsubishi Electric has long
recognised these key issues and has developed solutions for its own complex production needs. This has resulted in many
innovations such as GOT displays that have
“built in” maintetance screens as well as the
ability to review and monitor PLC programs. Other advances include MES interfaces for direct connection of PLC and HMI
technology to MES SQL databases.
Mitsubishi’s Vision1000 visualisation solutions are a clear part of today’s [email protected]
helping manufacturers increase productivity in a scalable and reliable way.
CNC
controllers
HMI and GOTs
EDM machines
Micro PLCs
Modular PLCs
Mitsubishi offer a wide range of automation equipment from PLCs and HMIs to CNC and EDM machines
A name to trust
Since its beginnings in 1870, some 45 companies use the Mitsubishi name, covering a
spectrum of finance, commerce and industry.
The Mitsubishi brand name is recognized
around the world as a symbol of premium
quality.
Mitsubishi Electric Corporation represents
space development, transportation, semiconductors, energy systems, communications and information processing, audio
visual equipment, home electronics, building and energy management and automation systems, and has 237 factories and
laboratories worldwide in over 121 countries.
This is why you can rely on a Mitsubishi
automation solution – because we know
first hand about the need for reliable, efficient, easy-to-use automation and control.
As one of the world’s leading companies
with a global turnover of 4 trillion Yen
(approximately $40 billion), employing
over 100,000 people, Mitsubishi Electric
has the resource and the commitment to
deliver the ultimate in service and support
as well as the best products.
15
/// GOT1000 /// E1000 /// IPC1000 ///
Technical Information Section
Further Publications within the Factory Automation Range
Brochure MELSERVO and Motion Controllers
Product catalogues for servo motors and amplifiers of the
MR-J2S Series and Motion Controllers with SSCNET
Brochure MELSEC SPS
Product catalogues for programmable logic controllers and
accessories for the MELSEC PLC series
Brochure MELFA Roboter
Product catalogue for MELFA industrial robots and accessories
More information?
This product catalogue is designed to give an overview of the extensive range of operator terminals of the GOT1000, E1000 series and Industrial PCs and Visualization software. If you cannot find the information you require in this catalogue, there are a number of ways you can get
further details on configuration and technical issues, pricing and availability.
For technical issues visit the www.mitsubishi-automation.com website.
Our website provides a simple and fast way of accessing further technical data and up to the minute details on our products and
services. Manuals and catalogues are available in several different languages and can be downloaded for free.
For technical, configuration, pricing and availability issues contact our distributors and partners.
Mitsubishi partners and distributors are only too happy to help answer your technical questions or help with configuration building.
For a list of Mitsubishi partners please see the back of this catalogue or alternatively take a look at the “contact us” section of our website.
About this product catalogue
This catalogue is a guide to the range of products available. For detailed configuration rules, system building, installation and configuration
the associated product manuals must be read. You must satisfy yourself that any system you design with the products in this catalogue is fit
for purpose, meets your requires and conforms to the product configuration rules as defined in the product manuals.
Specifications are subject to change without notice. All trademarks acknowledged.
© Mitsubishi Electric Europe B.V., Factory Automation - European Business Group
2
MITSUBISHI ELECTRIC
/// CONTENTS
1 Introduction and Configuration
웇 Introduction of the HMI control units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
웇 HMI and networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1
2 GOT Series Control Terminals
웇 System description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
웇 Panel description and specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2
3 E Series Operator Terminals
웇 System description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
웇 Panel description and specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3
4 Industrial PC´s
웇 Panel description and specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4
5 Accessories
웇
웇
웇
웇
Converter, interface modules for GT15/GT16, option cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Stands, Protective film sheets, keyboard extension, communications adapters etc. . . . . . . . . . . . . . . . . . . . . . . . . . 21
Interface converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
5
6 Dimensions
6
웇 GOT series control terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
웇 E series operator terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
웇 Industrial PC´s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
7 Software & Programming
7
웇 Visualization software MX4 HMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
웇 Programming software for GOT series control terminals GT-Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
웇 Programming software for E series operator terminals E-Designer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
MITSUBISHI ELECTRIC
3
/// INTRODUCTION AND CONFIGURATION
HMI Control Units for Human-Machine Communication
INTRODUCTION AND CONFIGURATION
1
The interface between human and
technology
Features
앬 Simple installation and user-friendly
앬 Report generation for quality control
Users of today’s factory automation systems
want more and clearer information on the
control systems of their plant and machinery. HMI control terminals and process visualisation software enable an informative
dialogue between operator and machine,
making them the ideal complement to the
MELSEC PLC systems and other factory
automation components.
HMI control units make factory system
functions transparent, enabling the
operator to monitor and edit process data
quickly and easily.
You can choose between HMI control units
with text and graphical displays. Fully programmable function keys and displays
make the units even more user-friendly. The
units can be programmed and configured
with a PC running the intuitive Windowsbased programming software package.
HMI units can be installed directly on your
machines and require nearly no additional
modules for connection to the PLC and
other factory automation components.
They provide direct access to all information and process data, with text or graphical
displays.
An IP65 rating (and higher) ensures that the
HMIs will always perform reliably, even
under the toughest conditions.
operation
앬 Broad range of applications
앬 Clear text and graphics process displays
앬 Precise, informative messages and
and process data exchange
instructions in error situations
7
MITSUBISHI
ABCD
4
MNOP
1
YZ!?
-
POWER
+/*=
ç
PREV
8
EFGH
5
QRST
2
C1-C4
5
9
IJKL
6
UVWX
3
< >()
.
°%#
_'@,
HOME
NEXT
ALARM
ACK
è
ü
MITSUBISHI
MITSUBISHI
Vision 1000
Mitsubishi Electric's Vision 1000 contains
different product lines for human- machine
communication, e.g. operator
GOT series
type
Display
terminals, IPCs, and visualization software,
and summarizes them as a concept, with
proprietary and open solutions, exactly coordinated with the respective application.
GT10 (14 models)
GT11 (5 models)
GT15 (22 models)
GT16 (12 models)
STN
STN
STN, TFT
TFT
dimensions
3.7"/ 4.5" / 4.7" / 5.7"
5.7"
5.7" – 15"
8.4" – 15"
text (lines x characters)
User definable
User definable
User definable
User definable
160x64 / 288x96 / 320x240
320x240
320x240 to 1024x768
680x480 to 1024x768
Power supply
graphical resolution (pixels)
5 V DC / 24 V DC
24 V DC
24 V DC / 220 V AC
24 V DC / 220 V AC
Internal memory capacity
512 KB / 1.5 MB / 3.0 MB
3 MB
5 – 9 MB
(expandable up to 57 MB)
15 MB
(expandable up to 57 MB)
External memory card
—
1 (Compact-Flash, 2 GB max.)
1 (Compact-Flash, 2 GB max.)
1 (Compact-Flash, 2 GB max.)
Keyboard
Touch-panel
Touch-panel
Touch-panel
Touch-panel
Function keys
Touch keys
Touch keys + 6 function keys
Touch keys
Touch keys
serial
2 x RS232, RS422 / RS232
(depending on model)
RS232C, RS422
RS232
RS232
others
GT104첸/GT105첸: USB (back side)
USB (front)
USB (front)
USB (front),
USB host for memory stick (2 GB max.)
Network possibilities
Serial
Serial
Ethernet (TCP/IP), CC-Link (IE), RS232, RS422, RS485, A-Bus, Q-Bus,
MELSECNET/10/H, Modbus TCP
IP Rating (front panel)
IP67
IP67 / IP65 (portable models)
IP67
Interfaces
4
IP67
MITSUBISHI ELECTRIC
INTRODUCTION AND CONFIGURATION ///
PLC, HMI and different Networks in Cooperation
HMI and networks
4
1
YZ!?
+/*=
ç
PREV
9
8
EFGH
IJKL
6
5
QRST
UVWX
3
2
C1-C4
5
< >()
.
°%#
_'@,
HOME
NEXT
ALARM
ACK
ETHERNET
è
ü
MELSECNET
MITSUBISHI
POWER
7
ABCD
4
MNOP
1
8
EFGH
5
QRST
2
YZ!?
C1-C4
+/*=
°%#
-
5
9
IJKL
6
UVWX
ç
PREV
è
HOME
NEXT
ALARM
ACK
ü
3
< >()
.
_'@,
P R O F
I
PROCESS FIELD BUS
B U S
7
ABCD
4
MNOP
1
8
EFGH
5
QRST
2
YZ!?
C1-C4
+/*=
°%#
-
5
9
IJKL
6
UVWX
ç
PREV
è
HOME
NEXT
ALARM
ACK
ü
3
< >()
.
_'@,
7
ABCD
4
MNOP
1
YZ!?
+/*=
ç
PREV
8
EFGH
5
QRST
2
C1-C4
5
9
IJKL
6
UVWX
3
< >()
.
°%#
_'@,
HOME
NEXT
ALARM
ACK
Interfaces
è
ü
앬 Modem Links
앬 PROFIBUS/DP
Enables connections over larger
distances.
앬 Ethernet
E series control units can be connected
as slaves in systems using the open field
bus protocol.
앬 Multidrop-Net
Enables programming and data logging
from a central location using a PC; the
individual stations operate autonomously and independently of one another.
앬 No-Protocoll-Link
Enables connection of barcode readers
and other serial devices to the PLC via
the E series control units.
앬 A-BUS/Q-BUS
Direct connection of the GT15 /GT16
to the PLC’s expansion port for fast
communications.
앬 MELSECNET/10/H and CC-Link IE
Enables high-speed access (up to
1 Gbaud) to the PLC from multiple
locations via the GT15.
앬 Multi Driver support
The control units can be used e.g. as
a gateway between 2 systems (E1000)
and a gateway between 4 systems
(GT15/GT16).
앬
앬
앬
앬
앬
앬
앬
앬
RS422
RS232C
RS485/RS422*
MELSEC A-BUS*
MELSEC Q-BUS*
PROFIBUS/DP*
Modbus TCP*
Ethernet TCP/IP (coaxial or twisted
pair)*
앬 CC-Link*
앬 USB*
*Standard or optional dependent on the operator
terminal type
E1012
E1022
E1032
E1041
E1043
E1060
E1062
E1061
E1063
E1070
E1071
E1100
E1101
E1151
LCD, monochrome
LCD, monochrome
LCD, monochrome
TFT
TFT
TFT
TFT
TFT
TFT
dimensions
89.6x17.9 mm 90.2x24.0 mm 135x36 mm
3.5"
5.7"
5.7"
6.5"
10.4"
15"
text (lines x characters)
User definable
graphical resolution (pixels)
160 x32
240x64
320x240
320x240
320x240
640x480
800x600
1024x768
12 MB
(expandable)
12 MB
(expandable)
12 MB
(expandable)
E series
type
Display
Network support, communication between
devices and data exchange are all standard
features in today’s factory automation systems. The HMI control units and process
visualisation software provide full support
for the commonest standard networks.
The control units are normally connected to
the RS422 or RS232 port.
If you require a standard open network you
can choose between PROFIBUS/DP, CC-Link
and Ethernet TCP/IP.
Data communications over longer distances via modem are also possible – this
means you can monitor and edit your configuration, programs and data from the
comfort of your desk.
240x64
Power supply
24 V DC (20 – 30 V)
Internal memory capacity
512 kB
512 kB
12 MB
12 MB
12 MB
12 MB
External memory card
—
—
—
—
—
—
1 (CF)
1 (CF)
1 (CF)
Membrane/
Touch-panel
Touch-panel
Keyboard
Membrane
Membrane
Membrane
Touch-panel
Membrane
Touch-panel
Membrane/
Touch-panel
Function keys
Yes
Yes
Yes
Touch keys
Yes
Touch keys
Yes/Touch keys Yes/Touch keys Touch keys
USB
USB
USB
USB
USB
serial
RS232, RS422 / RS232
others
—
Interfaces
—
Network possibilities
Ethernet (TCP/IP) (optional)
IP Rating (front panel)
IP66
MITSUBISHI ELECTRIC
USB
USB
Ethernet (TCP/IP), Modbus TCP, MPI (all integrated); Profibus/DP (optional)
5
1
INTRODUCTION AND CONFIGURATION
7
ABCD
MNOP
/// OPERATOR TERMINALS GOT
GOT1000
Complex processes displayed simply
OPERATOR TERMINALS GOT
2
The graphic operator terminals of the
GOT1000 series represent the top products
by MITSUBISHI ELECTRIC.They provide a
high-resolution fully graphical display and a
touch-sensitive user surface. The depth of
only 50 mm makes it to one of the slimmest
operator panel on the market. State
changes and user inputs can be entered
easily.
The 64-bit RISC processor used in the
GOT1000 series is combined with a specially
developed high-speed graphics processor.
Together, they deliver impressive response
and display drawing times.
With the GOT1000 the user accesses all
MELSEC PLCs special function modules in
order to test individual parts of the plant.
The PLC programs can be monitored graphically (ladder diagram).
The control units are programmed with
the GT Works software package running on
a PC under MS Windows®.
Programs can be stored either in the control
unit’s integrated, battery-powered RAM, in
plug-in EPROM modules or on Compact
flash memory cards.
A vast number of indicating instruments
like indicators, pressure gauges, analog and
digital measuring devices, etc. can be
replaced by corresponding graphical
objects.
Lots of ready-to-use practical objects are
included in the MS Windows® compatible
programming software and reduce program development time.
All units feature an integrated real-time
clock, password access control and alarm
and recipe handling.
The GOT1000 features Unicode 2.1 support.
This enables users to easily create multi-language displays.
Operator Terminals GT10
Intelligent Micro-GOTs
The GT1020/1030 series terminals have a
bright 3.7" resp. 4.5" STN b/w liquid crystal
display with touch screen and 3-color
backlight (LBDW and LBLW models features
white backlight) for use in a variety of display applications.
The new GT1040 and GT1050 provide a
2-colour (16 scales of blue/white) STN display, GT1045 and GT1055 a 256 colour STN
display with sizes of 4.7” and 5.7”. All displays feature a graphical resolution of
320x240 pixels and are designed as touch
screens.
These micro units are micro only in size. They
are full of high function capabilities which
deliver outstanding benefits. They are available with different interfaces, i.e. LBL and LBD
models provide an RS422 interface and LBL2,
LBD2 models provide an RS232 interface.
Many MITSUBISHI ELECTRIC automation components or third party devices can be connected and monitored, also PCs.
Both horizontal and vertical mounting is available to meet the needs of different applications.
MITSUBISHI
Operator Terminals GT11
Multi-talent for Stand-alone
Applications
The graphical control units of the GT11
series combines particularly easy operation
with maximum functionality and modest
space requirements. Portable handy types
are available too.
The 5.7" STN touchscreen offers brilliant
screens with up to 256 colours.
The graphic display configuration on the
touch screen is variable, giving the operator
quick and easily-comprehensible access to
information on machine functions.
With Compact Flash cards it is easy to transfer and save project data and operation system updates. The fast USB port on the front
of the units makes it possible to transfer
project data without opening the cabinet or
control console.
Mitsubishi PLC's, servo amplifiers, frequency inverters and several automation
components can be programmed and
parametrized directly via the GOT.
All GT11 units have a built-in recipe functionality.
MITSUBISHI
Operator Terminals GT15/GT16
Complex processes displayed simply
Every GT15/GT16 operator panel offers a
TFT colour touch screen with outstanding
graphic properties. Screen sizes from 5.7" to
15" are available. The graphic display configuration on the touch screen is variable,
giving the operating staff all possibilities of
modern applications.
In terms of networks, the GT15/GT16 are
especially powerful with options for
MELSECNET/10/H, CC-Link (IE) and Ethernet
as well as the four-driver-concept (4 drivers
at the same time and the possibility of data
6
exchange via gateway between the drivers
as well as third party manufacturers).
All GT15/GT16 units provide all mayor interfaces, especially named is the fast USB port
on the front side of the panel. It can be used
for all kinds of direct data exchange or project up and downloads.
The multimedia models GT16 feature ports
for microphones and cameras and are able
to play helpful videos in trouble situations.
In perfect interaction with the powerful iQ
platform this function helps to decrease
downtimes.
MITSUBISHI
MITSUBISHI ELECTRIC
OPERATOR TERMINALS GOT ///
Provided Connections for GT1020/GT1030
MITSUBISHI
GT1020/GT1030
GT01-C30R2-6P
GT10-C30R2-6P/EN
2
OPERATOR TERMINALS GOT
GT10-C30R4-8P
GT10-C30R4-25P
Q06HCPU
MELSEC
POWER
MODE
RUN
ERR.
USER
BAT.
BOOT
L
6
7
8
9
A
B
PULL
PULL
C
D
USB
USB
E
F
0
1
2
3
4
5
6
7
8
9
2
4
5
6
7
8
L
L
9
A
L
L
B
C
L
L
D
E
L
L
F
COM
PULL
L
N
X15
X7 X11 X13
X5
X3
X1
X14
S/S
X6 X10 X12
X4
X2
X0
0 1 2 3
4 5 6 7
8 9 10 11
12 13 14 15
MITSUBISHI
0
1
2
3
4
5
6
7
8
9
RUN
T.PASS
SD
ERR.
MNG
D.LINK
RD
L ERR.
STATION NO.
X10
X1
V+
C
VH
2
I+
SLD
V+
C
VH
3
I+
SLD
V+
C VH
4
I+
0
1
2
3
4
5
6
7
8
9
MODE
SLD
A.G.
NC
(FG)
COM
100-240
VAC
RUN
I+
SLD
3
L
L
L
L
C
VH
1
1
L
L
4
ERROR
V+
L
2
3
5
BASE UNIT
MODEL Q38B
SERIAL 0205020E
01234567
89ABCDEF
FUSE
01234567
89ABCDEF
1
QJ71BR11
Q64AD
QY80
QX80
Q06HCPU
MODE
RUN
ERR.
USER
BAT.
BOOT
Q61P-A2
RS-232
RS-232
24VDC
4mA
12VDC
24VDC
0.5A
A/D
0~±10V
0~20mA
QJ71BR11
IN
MITSUBISHI
POWER
RUN
ERROR
FX1N-24MR
OUT
0 1 2 3
4 5 6 7
10 11
Y3
Y2
Y1
Y0
0V
COM2 COM3 Y4
24+ COM0 COM1
Y6 Y10
Y5
Y11
COM4 Y7
MELSEC System Q
24MR
-ES/UL
MELSEC AnS/QnAS series
MELSEC FX Family
Provided Connections for GT10*/ GT11 / GT15
GOT1000
(Terminals GT10 QVGA, GT11 and GT15)
* GT1040/GT1045/GT1050/GT1055
USB GT09-C20-USB-5P via Front-USB
MITSUBISHI
GT01-C30R2-GP
Q06HCPU
MELSEC
POWER
MODE
RUN
ERR.
USER
BAT.
BOOT
L
4
6
7
8
9
A
B
PULL
PULL
C
D
USB
USB
E
F
0
1
2
3
4
5
6
7
8
9
2
4
5
6
7
8
L
L
9
A
L
L
B
C
L
L
D
E
L
L
F
COM
PULL
RUN
T.PASS
SD
ERR.
0
1
2
3
4
5
6
7
8
9
X1
V+
C
VH
2
I+
SLD
V+
C
VH
3
I+
SLD
V+
C VH
4
I+
0
1
2
3
4
5
6
7
8
9
MODE
GT01-C30R4-25P
SLD
A.G.
NC
(FG)
COM
RS-232
RS-232
24VDC
4mA
GT01-C30R2-9S
MNG
D.LINK
RD
L ERR.
STATION NO.
X10
I+
SLD
3
L
L
RUN
C
VH
1
1
L
L
ERROR
V+
L
L
L
2
3
5
BASE UNIT
MODEL Q38B
SERIAL 0205020E
01234567
89ABCDEF
FUSE
01234567
89ABCDEF
1
QJ71BR11
Q64AD
QY80
QX80
Q06HCPU
MODE
RUN
ERR.
USER
BAT.
BOOT
Q61P-A2
12VDC
24VDC
0.5A
A/D
0~±10V
0~20mA
QJ71BR11
MITSUBISHI
MELSEC System Q
GT01-C30R4-8P
100-240
VAC
L
N
X15
X7 X11 X13
X5
X3
X1
X14
S/S
X6 X10 X12
X4
X2
X0
0 1 2 3
4 5 6 7
8 9 10 11
12 13 14 15
MITSUBISHI
IN
POWER
RUN
ERROR
FX1N-24MR
OUT
0 1 2 3
4 5 6 7
10 11
Y6 Y10
Y5
Y3
Y2
Y1
Y11
Y0
0V
COM4 Y7
COM2 COM3 Y4
24+ COM0 COM1
MELSEC AnS/QnAS series
24MR
-ES/UL
Personal Computer
MELSEC FX Family
General Operating Conditions
Operating Conditions
Ambient temperature in display
operation
main body unit
Storage temperature
Ambient relative humidity
Noise durability
Dielectric withstand voltage
Shock resistance
Vibration resistance
Altitude
Applicable installation position
Over-voltage category
Pollution degree
EMC
Environment
Cooling
Certifications
GT10
GT11
GT15
0 – +50 °C
0 – +55 °C (0 – +50 °C for vertical installation)
0 – +55 °C
-20 – +60 °C
10 – 90 % (non-condensing)
1000 Vpp tested by noise generator; 1 µs at 30 – 100 Hz
1500 V AC, > 1 min / 500 V DC, > 1 min
15 G (3 times each in 3 directions)
1 G: resistant to vibrations from 9 – 150 Hz for 80 min. along all 3 axes
Max. 2000 m above NN
Cabinet or command panel
Max. II
Max. 2
89 / 336 / EEC und 93 / 68 / EEC
Avoid environments containing aggressive gases
Self-cooling
CE
MITSUBISHI ELECTRIC
GT16
0 – +50 °C
0 – +55 °C
-20 – +60 °C
10 – 90 % (non-condensing)
1000 Vpp tested by noise generator; 1 µs at 30 – 100 Hz
1500 V AC, > 1 min / 500 V DC, > 1 min
15 G (3 times each in 3 directions)
1G:resistanttovibrationsfrom9–150Hzfor80min.alongall3axes
Max. 2000 m above NN
Cabinet or command panel
Max. II
Max. 2
89 / 336 / EEC und 93 / 68 / EEC
Avoid environments containing aggressive gases
Self-cooling
CE
7
/// OPERATOR TERMINALS GOT
GT1020
GT1030
GT1040
GT1045
GT1050
GT1055
MITSUBISHI
MITSUBISHI
MITSUBISHI
OPERATOR TERMINALS GOT
2
The micro GOTs GT1020 and GT1030 offer
a bright monochrome STN 3.7“ or 4.5“
display with touchscreen functionality and
tri-colour background illumination (LBDW
and LBLW models, also with white
background available) for a broad variety of
applications.
Small in dimensions, the versatile micro
GOTs offer a number of outstanding
powerful features. Different fonts and
languages can be used, and when an error
occurs the background can be light-up in
red as an eye catcher.
They are available with an RS422 (LBL and
LBD models) or RS232 (LBL2 and LBD2
models) programming interface.
GT1020-LBL/-LBD/-LBD2/LBLW/-LBDW/-LBDW2
GT1030-LBD/-LBD2/-LBDW/-LBDW2
Specifications
Display unit
type
dimensions (mm)
text (lines x characters)
character height (mm)
graphical resolution (pixels)
Power supply
Internal memory capacity
Memory card slot
Keyboard type
internal
Function keys
external
LED indicators
serial
Interfaces
parallel
others
Interface slot for optional cards
Real-time clock
Network communica- type
tion possibilities
max. no. of nodes
IP Rating (front panel)
Dimensions WxHxD (mm)
Weight (kg)
Order information
Accessories
8
The new models GT1040 and GT1050
provide a 2-colour (16 scales of blue/white)
STN display, GT1045 and GT1055 a 256
colour STN display. The monitor sizes of
GT1040/GT1045 amount to 4.7” and of
GT1050/GT1055 amount to 5.7”. All displays
feature a graphical resolution of 320x240
pixels and are designed as touch screens.
The internal memory, used for projects and
system data, is 3 MB. This is twice as big as
the memory of a GT1030. With an option
module it is possible to save GOT project
data. Suitable connection cables for the
back side interfaces (e.g. USB, RS422, and
RS232) are available, too.
GT1040-QBBD
GT1050-QBBD
Apart from many automation components
of MITSUBISHI ELECTRIC also devices of
third party manufacturers and PCs can be
connected. The integrated high-speed USB
interface (not available for GT1020/GT1030)
allows the programming of Mitsubishi PLCs,
frequency inverters and servo amplifiers by
using transparent mode.
All GOT1000 can be programmed easily via
PC with the software package GT Designer 2.
All GOT1000 panels can be mounted and
used horizontal or vertical, which increases
the flexibility in planning and application.
GT1045-QSBD
GT1055-QSBD
STN, monochrome
STN, blue/white, 16 scales
STN, 256 colours
86.4x34.5 (3.7") / 109.4x36 (4.5")
96x72 (4.7") / 115x86 (5.7")
96x72 (4.7") / 115x86 (5.7")
User definable
User definable
User definable
User definable, Windows fonts
User definable, Windows fonts
User definable, Windows fonts
160x64 / 288x96
320x240
320x240
GT1020: 5 V DC / 24 V DC
24 V DC
24 V DC
GT1030: 24 V DC
512 kB / 1.5 MB
3.0 MB
3.0 MB
—
—
—
Touch-panel
Touch-panel
Touch-panel
Touch keys
Touch keys
Touch keys
—
—
—
—
—
—
RS232, RS422 / 2 x RS232
RS232, RS422
RS232, RS422
—
—
—
—
USB
USB
—
1, for saving project data
1, for saving project data
GT1020: — / GT1030: integrated
Integrated
Integrated
Serial (max. 2 GOTs per FX or Q PLC), Multidrop master (max. 16 GOTs via master unit per FX or Q PLC, Modbus RTU)
2
2
2
IP67
IP67
IP67
113x74 / 145x76
139x112 / 164x135
139x112 / 164x135
0.2 / 0.3
0.45 / 0.7
0.45 / 0.7
/ 200491 / 200492 / 208670 / 208668 / 208669
Art. no. 200738
206969 / 206970 / 206971 / 206972
221929
218492
221930
218491
Programming software (refer to page 39), cables and interface adapters (refer to page 18)
MITSUBISHI ELECTRIC
OPERATOR TERMINALS GOT ///
GT1150
GT1155
GT1150HS
GT1155HS
GT1550
GT1555
MITSUBISHI
MITSUBISHI
The GT11 series graphic operating
terminals GT1150-QLBD and
GT1150HS-QLBD (display with 16 grey
scales), GT1155-QSBD and
GT1155HS-QSBD (256 colours) are the
standard models of the versatile GOT1000
series. They offer a wide range of basic
functions for stand-alone use.
Beside their outstanding speed and performance they features a modern design and a
first on the market front USB port for project
download and PLC maintenance.
The panels can be mounted and used horizontally or vertically.
The GT1150HS-QLBD and
GT1155HS-QSBD are handsome portable
terminals that boast top level quality for
medium sized terminals. They share the
same functions as all GT11 series terminals.
Mitsubishi Electric Controllers, inverters and
servo amplifiers can be easily programmed
via the transparent USB functionality.
All GT11 terminals feature recipes, alarms,
multi-language and Unicode support.
Furthermore they offer various graphical
object libraries.
GT1150-QLBD /
GT1155-QSBD / GT1155-QTBD
QL: STN, 16 grey scales
type
QS: STN, 256 colours
QT: TFT, 256 colours
dimensions
(mm)
115x86 (5.7")
Display unit
text (lines x characters)
User definable
character height (mm)
User definable, Windows fonts
graphical resolution (pixels) 320x240
Power supply
24 V DC
Internal memory capacity
3 MB
Memory card slot
1 (CF)
Keyboard type
Touch-panel
internal
Touch keys
Function keys
external
—
LED indicators
1 (Power ON)
serial
RS232C, RS422 (2ch)
Interfaces
parallel
—
others
USB (front side)
Interface slot for optional cards
—
Real-time clock
Integrated
Serial (max. 2 GOTs per FX or Q PLC),
Multidrop master (max. 16 GOTs via master unit
Network communica- type
per
tion possibilities
FX or Q PLC, Modbus RTU)
max. no. of nodes
2
IP Rating (front panel)
IP67F
Dimensions WxHxD (mm)
164x135x56
Weight (kg)
0.7
Specifications
Order information
/
Art. no. 162709
162710 / 215077
Accessories
MITSUBISHI ELECTRIC
GT1150HS-QLBD /
GT1155HS-QSBD
QL: STN, 16 grey scales
QS: STN, 256 colours
The GT1550 and GT1555 models provide
an exceptionally clear 5.7“ display comprising 16 grey scale steps over 4,096 colours
up to 65,536 colours and full VGA resolution
quality (640x480 pixels).
Windows fonts are utilized for clear text presentation as well as CF card interface for
project operation systems and data storage
are available.
These models open the door to visualization of complex processes with modern
functions and full network support.
GT1550-QLBD / GT1555-QSBD /
GT1555-QTBD / GT1555-VTBD
QL: STN monochrome
QS: STN 4096 colours
QT, VT: TFT, 65536
115x86 (5.7")
User definable
User definable, Windows fonts
320x240 / VTBD: 640x480
115x86 (5.7")
User definable
User definable, Windows fonts
320x240
24 V DC
3 MB
1 (CF)
Touch-panel
Touch keys + 6 function keys
—
1 (Power ON)
RS232C, RS422 (1ch)
—
USB (top side)
—
Integrated
9 MB
1 (CF)
Touch-panel
Touch keys (300 per screen)
—
1 (Power ON)
RS232
—
USB (front side)
2
Integrated
—
Ethernet, Melsecnet/10/H, CC-Link IE,
RS422/RS485, RS232, A-BUS, Q-BUS
—
IP67F
176x220x93
1.0
2
IP67F
167x135x60
1.1
170180 / 170181
203472 / 203471 / 203470 /
209823
Programming software (refer to page 39), cables and interface adapters (refer to page 18)
9
OPERATOR TERMINALS GOT
2
POWER
/// OPERATOR TERMINALS GOT
GT1562
GT1565
GT1572
GT1575
GT1575V
GT1585 / GT1595
GT1585V
2
POWER
POWER
OPERATOR TERMINALS GOT
POWER
The proprietary operating
system as well as the
completely new developed
hardware result in an outstanding performance and quality of
the GT15 operator terminals.
The user can choose between
several fast project up- and
download options; high-speed
serial connection with 115
kBaud, USB or project transfer
via CF-card is available.
In addition, the GT15 offer
Ethernet project transfer via the
optional Ethernet interface
GT15-J71E71-100.
Specifications
Display unit
Power supply
type
dimensions (mm)
text (lines x characters)
character height (mm)
graphical resolution (pixels)
A types
D types
Internal memory capacity
Memory card slot
Keyboard type
Function keys
internal
external
LED indicators
serial
parallel
others
Interface slot for optional cards
Real-time clock
Interfaces
Network communication possibilities
IP Rating (front panel)
Dimensions WxHxD (mm)
Weight (kg)
Order information
Accessories
10
POWER
MELSEC PLCs can easily be
programmed using the front
USB port with integrated
Transparent Mode, so updates
on PLCs, servo amplifiers,
inverters and GOT terminals
can be accomplished without
opening the cabinet.
The file system of the CF card is
PC compatible. Projects and
operating system components
can be downloaded to the CF
card. The GT15 can load the files
from the CF card. This is a
crucial advantage for manufacturers of serial machines.
In terms of networks, the GT15
are especially powerful with
options for MELSECNET/10/H,
CC-Link (IE) and Ethernet as well
as the four-driver-concept (4
drivers at the same time and the
possibility of data exchange via
gateway between the drivers as
well as third party manufacturers).
By using an MES option card the
GT15 are able to communicate
direct with Windows databases
without needing a Gateway-PC.
GT1562-VNBA / GT1565-VTBA
GT1562-VNBD / GT1565-VTBD
GT1572-VNBA / GT1575-VNBA
GT1572-VNBD / GT1575-VNBD
TFT, 16 colours / 65536 colours
171x128 (8.4")
User definable
User definable, Windows fonts
640x480
100 – 240 V AC
24 V DC
VNtypes:5MB(expandableupto53MB)
VTtypes:9MB(expandableupto57MB)
1 (compact flash 256 MB max.)
Touch-panel
Touch keys
—
1
RS232C
—
USB (on panel front)
1/2
Integrated
Ethernet, Melsecnet/10/H, CC-Link IE,
RS422/RS485, RS232, A-BUS, Q-BUS
IP67
241x150 x56
1.9
TFT, 16 colours / 256 colours
211x158 (10.4")
User definable
User definable, Windows fonts
640x480
100 – 240 V AC
24 V DC
/ 162705
Art. no. 166240
169480 / 169481
The Video models
GT1585V-STBD and
GT1575V-STBD additionally
support video/RGB input to
monitor images from PC's,
cameras and vision sensors
directly on the GOT.
All GT15 operator terminals
listed on this page are available
as AC type ( models*) or as DC
type ( models).
*Not for the video models
GT1575-VTBA / GT1575-STBA
GT1575-VTBD / GT1575-STBD,
GT1575V-STBD
TFT, 65536 colours (expandable)
211x158 (10.4")
User definable
User definable, Windows fonts
640x480 / 800x600
100 – 240 V AC
24 V DC
GT1585-STBA / GT1595-XTBA
GT1585-STBD / GT1595-XTBD,
GT1585V-STBD
TFT, 256 colours (expandable)
246x185 (12.1") / 304x228 (15")
User definable
User definable, Windows fonts
800x600 / 1024x768
100 – 240 V AC
24 V DC
5 MB (expandable up to 53 MB)
9 MB (expandable up to 57 MB)
9 MB (expandable up to 57 MB)
1 (compact flash 256 MB max.)
Touch-panel
Touch keys
—
1
RS232C
—
USB (on panel front)
1
Integrated
Ethernet, Melsecnet/10/H, CC-Link IE,
RS422/RS485, RS232, A-BUS, Q-BUS
IP67
303x214x56
2.3
1 (compact flash 256 MB max.)
Touch-panel
Touch keys
—
1
RS232C
—
USB (on panel front)
2
Integrated
Ethernet, Melsecnet/10/H, CC-Link IE,
RS422/RS485, RS232, A-BUS, Q-BUS
IP67
303x214x56
2.3 / 2.4
1 (compact flash 256 MB max.)
Touch-panel
Touch keys
—
1
RS232C
—
USB (on panel front)
2
Integrated
Ethernet, Melsecnet/10/H, CC-Link IE,
RS422/RS485, RS232, A-BUS, Q-BUS
IP67
316x242x56 / 397x296x61
2.8 / 4.9
166241 / 166242
169482 / 169483
162706 / 162707 / 169484 / 169485, 162708 / 169464 / 169486 / 203469,
video model 203496
video model 203495
Programming software (refer to page 39), cables and interface adapters (refer to page 18)
MITSUBISHI ELECTRIC
OPERATOR TERMINALS GOT ///
GT1665M
GT1675M
GT1685M
GT1695M
MITSUBISHI
MITSUBISHI
The new all-in-one models of
the GT16 series are packed with
all the solutions to meet the
needs of customers. This leads
GT16 terminals to become full
components of system control
management.
Many of the well-known useful
functions are already integrated,
e.g. avariety of networkconnectionssuchasEthernet and RS422/
RS485 beside the generously
measured project and data
memory of 15 MB (with CF card
expandable up to 57 MB max.).
Using separate expansions units
it is very easy to upgrade the
GT16 with special functions or
additional interfaces. The
high-speed USB ports on the
front panel allow the user to
save and restore project data
and PLC programs via standard
USB memory sticks. This is very
helpful if the PLC CPU needs to
be exchanged. The PLC program
can be backuped and restored
plus saving of historical information (e.g. trends, alarms) using
the USB port of the GT16.
The high-resolution TFT monitor
shows pictures, windows, diagrams and touchkeys in highest
quality and up to 65536 colours.
All screens can be created individually with the GT Designer 2
software, installed on a standard
PC. Every item can be moved
freely on the whole monitor.
This makes using easier even for
complex applications.
Up to four CCD cameras can be
connected, and with an installed
multimedia option card it is possible to play prerecorded trou-
MITSUBISHI
bleshooting videos or to record
and analyze event-driven videos.
The build-in Self-diagnosis function recognizes problems and
plays an instruction video or
shows helpful hints. In perfect
interaction with the powerful iQ
platform this function helps to
decrease downtimes.
Using an MES option card GT16
operator terminals can
communicate directly with
Windows databases without the
need of a gateway PC.
GT1665M-STBA, GT1665M-STBD,
GT1665M-VTBA, GT1665M-VTBD
GT1675M-STBA, GT1675M-STBD,
GT1675M-VTBA, GT1675M-VTBD
GT1685M-STBA,
GT1685M-STBD
GT1695M-XTBA,
GT1695M-XTBD
type
8.4", TFT, 65536 colours
10.4", TFT, 65536 colours
12.1", TFT, 65536 colours
15", TFT, 65536 colours
dimensions (mm)
171x128
211x158
249x184.5
304.1x228.1
text (lines x characters)
User definable
User definable
User definable
User definable
character height (mm)
User definable, Windows fonts
Specifications
Display unit
MITSUBISHI
User definable, Windows fonts
User definable, Windows fonts
User definable, Windows fonts
STB첸: 800x600
graphical resolution (pixels) VTB첸:
640x480
STB첸: 800x600
VTB첸: 640x480
800x600 (SVGA)
1024x768 (XGA)
A types
100 – 240 V AC
100 – 240 V AC
100 – 240 V AC
100 – 240 V AC
D types
24 V DC
24 V DC
24 V DC
24 V DC
Memory capacity
15 MB
15 MB
15 MB
15 MB (expandable up to 57 MB)
Internal memory capacity
1 (compact flash)
1 (compact flash)
1 (compact flash)
1 (compact flash)
Keyboard type
Power supply
Function keys
Touch-panel
Touch-panel
Touch-panel
Touch-panel
internal
Touch keys
Touch keys
Touch keys
Touch keys
external
—
—
—
—
1 (POWER)
1 (POWER)
1 (POWER)
1 (POWER)
LED indicators
Interfaces
Ethernet (TCP/IP), RS232, RS422/485, USB (front), CF slot, Human sensor, optional: function cards
Interface slot for optional cards
1 CF-Slot
1 CF-Slot
1 CF-Slot
1 CF-Slot
Multimedia capability
Integrated
Integrated
Integrated
Optional
Real-time clock
Integrated
Integrated
Integrated
Integrated
Network communication possibilities
Ethernet (TCP/IP), CC-Link (IE), Modbus, RS232, RS422/485, A-Bus, Q-Bus, MELSECNET/10/H
IP Rating (front panel)
IP67
IP67
IP67
IP67
Dimensions WxHxD (mm)
241x190x52
303x214x49
316x242x52
397x296x61
Weight (kg)
1.7
2.1
2.7
5.0
221945 / 221946
221947 / 221948
221360
221361
221358
221359
Order information
/ 221950
Art. no. 221949
221951 / 221952
Accessories
MITSUBISHI ELECTRIC
Programming software (refer to page 39), cables and interface adapters (refer to page 18)
11
OPERATOR TERMINALS GOT
2
/// OPERATOR TERMINALS E SERIES
Operator Terminals E1000
The E Series - State-of-the-Art Operation and Process Design!
The E series operator terminals provide a
unique concept of flexible display blocks.
The dialog screen is displayed quickly and
can be adopted to suit the users needs.
These operator terminals in many cases are
capable of replacing a complete control
console.
OPERATOR TERMINALS E SERIES
3
The features include user-definable text,
control parameter and data editing, alarm
handling, recipes and menu operation.
Programming is performed with an
MS-Windows® compatible PC running the
E-Designer software package.
They permit simple alteration of process
data and thus influence the particular
application.
The units in the E series are perfectly
matched to the range of MELSEC controllers
and yet easy to operate.
“Dialog blocks” consisting of text and/or
graphics form the basis of all E applications.
Via the object-orientated programming system, each dialog block displays all signals
and values allocated to the object in digital
and analog form.
The individual dialog blocks that make
up a E application form a hierarchical tree
structure with the needed function
assigned to each dialog block. Thus, they
are adopted to the machine and process
functions. The result is a clear operator
guidance with a clear information flow and
clear text messages in case of an error.
Q06HCPU
MELSEC
POWER
MODE
RUN
ERR.
USER
BAT.
BOOT
L
4
L
L
6
7
8
9
A
B
PULL
PULL
C
D
USB
USB
E
F
0
1
2
3
4
5
6
7
8
9
L
L
2
4
5
6
7
8
9
A
L
B
C
L
L
D
E
L
L
F
COM
PULL
MNG
D.LINK
RD
L ERR.
I+
SLD
3
L
L
RUN
T.PASS
SD
ERR.
STATION NO.
X10
C
VH
1
1
L
L
RUN
ERROR
V+
L
L
2
3
5
BASE UNIT
MODEL Q38B
SERIAL 0205020E
01234567
89ABCDEF
FUSE
01234567
89ABCDEF
1
QJ71BR11
Q64AD
QY80
QX80
Q06HCPU
MODE
RUN
ERR.
USER
BAT.
BOOT
Q61P-A2
0
1
2
3
4
5
6
7
8
9
X1
V+
C
VH
2
I+
SLD
V+
C
VH
3
I+
SLD
V+
C VH
4
I+
0
1
2
3
4
5
6
7
8
9
MODE
SLD
A.G.
NC
(FG)
COM
RS-232
RS-232
24VDC
4mA
12VDC
24VDC
0.5A
A/D
0~±10V
0~20mA
QJ71BR11
MITSUBISHI
7
ABCD
4
MNOP
1
YZ!?
+/*=
ç
PREV
8
EFGH
5
QRST
2
C1-C4
5
9
IJKL
6
UVWX
3
< >()
.
°%#
_'@,
HOME
NEXT
ALARM
ACK
è
ü
7
ABCD
4
MNOP
1
YZ!?
+/*=
ç
PREV
8
EFGH
5
QRST
2
C1-C4
5
°%#
9
IJKL
6
UVWX
3
< >()
.
_'@,
è
HOME
NEXT
ALARM
ACK
ü
7
ABCD
4
MNOP
1
5
QRST
2
YZ!?
C1-C4
+/*=
°%#
-
12
8
EFGH
5
9
IJKL
6
UVWX
ç
PREV
è
HOME
NEXT
ALARM
ACK
Text and graphic blocks return static or
dynamic information to the operator.
Text blocks display numeric values and text.
The display supports scrolling, so the size of
text blocks is not limited by the number of
lines on the screen.
The blocks can be output to a printer under
PLC control.
The graphics block size is limited by the
display which has a resolution of
240x64 pixel up to 1024x768 pixel.
Static objects for example, can be displayed
in different font sizes or with predefined
graphic objects.
Dynamic objects are predefined as well for
easier application development and can be
scaled to any size.
In addition to these predefined objects
self-created bitmap graphics can be
imported and managed in libraries.
ü
3
< >()
.
_'@,
MITSUBISHI ELECTRIC
OPERATOR TERMINALS E SERIES ///
Communications
7
ABCD
4
MNOP
1
8
EFGH
5
QRST
2
YZ!?
C1-C4
+/*=
°%#
-
5
è
ç
9
HOME
NEXT
ALARM
ACK
PREV
IJKL
6
UVWX
ü
3
< >()
.
_'@,
NO-Protocol-Mode
Ethernet
7
ABCD
4
MNOP
1
YZ!?
+/*=
ç
PREV
8
EFGH
5
QRST
2
C1-C4
5
9
7
IJKL
ABCD
6
4
UVWX
MNOP
3
1
< >()
YZ!?
.
°%#
_'@,
HOME
NEXT
ALARM
ACK
+/*=
è
ç
PREV
8
EFGH
5
QRST
2
C1-C4
5
ABCD
4
MNOP
1
8
EFGH
5
QRST
2
YZ!?
C1-C4
+/*=
°%#
-
5
9
IJKL
6
UVWX
ç
PREV
9
IJKL
6
UVWX
3
< >()
.
°%#
_'@,
HOME
NEXT
ALARM
ACK
è
ü
7
ü
è
HOME
NEXT
ALARM
ACK
ü
3
< >()
.
_'@,
Networking
Ethernet
All E1000 operator terminals feature an
integrated Ethernet adapter to realize an
Ethernet network.
Within this network up to 30 stations can be
connected to one PLC in a segment.
The connection to open networks can be
established through an optional interface
for PROFIBUS/DP with a transfer rate of up
to 12 Mbit.
7
ABCD
4
MNOP
1
YZ!?
+/*=
ç
PREV
8
EFGH
5
QRST
2
C1-C4
5
9
IJKL
6
UVWX
3
< >()
.
°%#
_'@,
HOME
NEXT
ALARM
ACK
è
ü
7
ABCD
4
MNOP
1
8
EFGH
5
QRST
2
YZ!?
C1-C4
+/*=
°%#
-
5
9
IJKL
6
UVWX
ç
PREV
è
HOME
NEXT
ALARM
ACK
7
ABCD
ü
4
MNOP
3
1
8
EFGH
5
QRST
2
< >()
.
YZ!?
C1-C4
_'@,
+/*=
°%#
-
5
9
IJKL
6
UVWX
ç
PREV
è
HOME
NEXT
ALARM
ACK
ü
3
< >()
.
_'@,
Dual Driver
7
ABCD
4
MNOP
1
YZ!?
+/*=
ç
PREV
8
EFGH
5
QRST
2
C1-C4
5
9
IJKL
6
UVWX
3
< >()
.
°%#
_'@,
HOME
NEXT
ALARM
ACK
è
ü
PROFIBUS/DP
Dual Driver
The operator terminal can communicate
with two components of different manufactures; also data exchange between the two
drivers is possible.
7
ABCD
4
MNOP
1
Specifications
Ambient temperature in operation
0 – +50 °C (all E series operator terminals)
Operating temperature range
Max. 90 % (non-condensing)
Storage temperature
-20 – +60 °C
Noise durability
1000 Vpp tested by noise generator; 1 µs at 30 – 100 Hz
Dielectric withstand voltage
1500 V AC, > 1 min.
Shock resistance
10 G (3 times each in 3 directions)
Vibration resistance
1 G: resistant to vibrations from 10 – 55 Hz for 2 h. along all 3 axes
Insulation resistance
> 5 MW (500 V DC)
Grounding
Class 3 (100 W)
Environment
Avoid environments containing aggressive gases, install in a dust-free location.
Cooling
Self-cooling
Certifications
UL / CSA / CE / DNV / RINA / LR
MITSUBISHI ELECTRIC
5
QRST
2
C1-C4
+/*=
°%#
-
Operating Conditions
8
EFGH
YZ!?
5
9
IJKL
6
UVWX
ç
PREV
è
HOME
NEXT
ALARM
ACK
ü
3
< >()
.
_'@,
13
3
OPERATOR TERMINALS E SERIES
All E series control units are fitted with an
RS422 and an RS232 interface for connection to the PLC.
This second port enables the unit to be run
in transparent mode.
This means that the E series is capable of
communicating simultaneously with both
the connected PLC system and a PC (via the
MX4 HMI or GX IEC Developer software).
The E units can also be linked to the PC via
modem.
Another communications option is the
no-protocol mode for the connection of
serial peripheral devices (e.g. bar-code
readers).
Printer, mouse, keyboard or a USB memory
stick can be connected to an E1000 control
unit via the integrated USB host port.
RS232C
/// OPERATOR TERMINALS E SERIES
E1012
E1022
E1032
E1041
E1043
E1060
E1062
E1061
E1063
7
ABCD
4
UVWX
2
3
7
1
8
EFGH
5
QRST
2
YZ!?
C1-C4
+/*=
°%#
-
5
9
ç
PREV
IJKL
6
UVWX
NEXT
ACK
.
_'@,
HOME
NEXT
ALARM
ACK
è
ü
è
HOME
ALARM
< >()
5
°%#
PREV
4
C1-C4
+/*=
ç
ABCD
IJKL
6
5
QRST
1
YZ!?
MNOP
9
8
EFGH
MNOP
ü
3
< >()
.
_'@,
6
OPERATOR TERMINALS E SERIES
3
E1012, E1022 and E1032 have
programmable function keys
and a separate keypad. The
graphic-capable displays illustrate symbols, alarms, line diagrams and text in arbitrary
sizes. Formulas, text and
changes in the sequence program can be done directly via
the keys.
Specifications
Display unit
The E1041 and E1043 terminals have a 3.5" TFT touch
screen (65,536 colours or 16
grey scales). Recipes, text and
editing changes are entered via
keys. Password levels protect
the system against unauthorised access, while sixteen separate alarm groups keep you
informed on all-important developments. The unit features
two PLC ports, a USB host port
to connect mouse, keyboard,
printer and USB memory as well
as an integrated Ethernet interface. Profibus/DP is available via
a separate extension module.
The E1060 and E1062 units
provide a 5.7” TFT display with
65,536 colours or 2 colours
(blue/white). Both models
feature screen-oriented
function keys for user- friendly
operation.
The E1061 and E1063 terminals
have a 5.7" TFT touch screen
(65,536 colours or 16 grey
scales). Recipes, text and editing
changes are entered via touch
keys on the display.
More features of the E1060 to
E1063 are: Recipes,text and
editing changes are entered via
keys. Password levels protect
the system against unauthorised access, while sixteen
separate alarm groups keep
you informed on all-important
developments.
Each unit features two PLC
ports, one USB host port to connect mouse, keyboard, printer
and USB memory sticks as well
as an integrated Ethernet interface.
Profibus/DP is available via a
separate extension module.
E1012 / E1022
E1032
E1041 / E1043
E1060 / E1062
E1061 / E1063
type
LCD monochrome
LCD monochrome
TFT colour / TFT grey scale
TFT colour / TFT grey scale
TFT colour / TFT grey scale
dimensions (mm)
89.6x17.9 / 90.2x24.0
135x36
75x54 (3.5")
120x91 (5.7")
145x110 (5.7")
text (lines x characters)
User definable
User definable
User definable
User definable
User definable
character height (mm)
User definable, Windows fonts User definable, Windows fonts User definable, Windows fonts User definable, Windows fonts User definable, Windows fonts
graphical resolution (pixels) 160x32 / 240x64
240x64
320x240
320x240
320x240
Power supply
24 V DC (20 – 30 V)
24 V DC (20 – 30 V)
24 V DC (20 – 30 V)
24 V DC (20 – 30 V)
24 V DC (20 – 30 V)
Internal memory capacity
512 kB
12 MB
12 MB
12 MB
12 MB
Flash memory
—
32 MB (Intel Strata Flash)
32 MB (Intel Strata Flash)
32 MB (Intel Strata Flash)
32 MB (Intel Strata Flash)
Keyboard type
Function keys
Membrane
Membrane
Touch-panel
Membrane
Touch-panel
internal
6
8
Touch keys
16
Touch keys
external
—
—
—
—
—
LED indicators
6 (integrated in keys)
16 (8 integrated in keys)
1 (Power ON)
16 (8 integrated in keys)
1 (Power ON)
serial
RS232C, RS422/RS485
RS232C, RS422/RS485
RS232C, RS422/RS485
RS232C, RS422/RS485
RS232C, RS422/RS485
parallel
—
—
—
—
—
others
—
USB
USB
USB
USB
Interface slot for optional cards
1
1
1
1
1
Real-time clock
Integrated
Integrated
Integrated
Integrated
Integrated
Network communication possibilities
Ethernet (TCP/IP) (optional)
Ethernet (TCP/IP), Modbus
TCP, MPI (all integrated);
Profibus/DP (optional)
Ethernet (TCP/IP), Modbus
TCP, MPI (all integrated);
Profibus/DP (optional)
Ethernet (TCP/IP), Modbus
TCP, MPI (all integrated);
Profibus/DP (optional)
Ethernet (TCP/IP), Modbus
TCP, MPI (all integrated);
Profibus/DP (optional)
IP Rating (front panel)
IP 66
IP 66
IP 66
IP 66
IP 66
Dimensions WxHxD (mm)
155x114x40 / 155x155x41
202x187x63
156x119x63
275x168x63
201x152x63
Weight (kg)
0.4 / 0.5
0.9
0.56
1.1
0.87
169297
169298 / 169299
216254 / 216306
216305 / 216307
Interfaces
Order information
Accessories
14
Art. no. 202084 / 202085
Programming software E-Designer (refer to page 40), cables and interface adapters (refer to page 18)
MITSUBISHI ELECTRIC
OPERATOR TERMINALS E SERIES ///
E1070
E1070 Pro+
E1071
E1071 Pro+
7
ABCD
4
E1100
E1100 Pro+
E1101, E1101 Pro+
E1151, E1151 Pro+
DT1151
7
9
8
EFGH
ABCD
IJKL
4
6
5
8
EFGH
5
MNOP
QRST
UVWX
MNOP
QRST
1
2
3
1
2
YZ!?
C1-C4
YZ!?
< >()
-
5
.
-
+/*=
°%#
_'@,
+/*=
HOME
NEXT
ALARM
ACK
ç
PREV
è
ç
PREV
C1-C4
5
9
IJKL
6
UVWX
3
< >()
.
°%#
_'@,
HOME
NEXT
ALARM
ACK
è
ü
ü
7
6
The operator terminal E1070
offers a 6.5" TFT display with
65,536 colours and a resolution
of 640x480 pixels. 16 freely programmable function keys facilitate the inputs directly at the
terminal.
The 6.5" TFT colour display of
the E1071 with 65,536 colours
provides a user-friendly touch
screen operation. Recipes, text
and editing changes are
entered via touch keys.
Specifications
The operator terminal E1100
offers a 10.4" TFT display with
65,536 colours and a resolution
of 800x600 pixels. Freely programmable function keys facilitate the inputs directly at the
terminal.
The operator terminals E1101
and E1151 provide a userfriendly TFT colour touchscreen.
The E1101 offers a resolution of
800x600 pixels on a 10.4" screen,
the E1151 provides a 15" screen
with 1024x768 pixels.
All E1000 operator terminals on
this page provide two PLC
ports, a USB host port to connect mouse, keyboard, printer
and USB memory as well as an
integrated Ethernet interface.
Profibus/DP is available via a
separate extension module.
The internal memory of 12 MB
can be expanded.
The integrated password protection protect the system
against unauthorised access,
and sixteen separate alarm
groups keep you informed on
all-important developments.
E1101 / E1101 Pro+,
E1151 / E1151 Pro+, DT1151
E1070 / E1070 Pro+
E1071 / E1071 Pro+
type
TFT
TFT
TFT
TFT
dimensions (mm)
134x100 (6.5")
134x100 (6.5")
211x158 (10.4")
211x158 (10.4") , 304x228 (15")
text (lines x characters)
User definable
User definable
User definable
User definable
character height (mm)
User definable, Windows fonts
User definable, Windows fonts
User definable, Windows fonts
User definable, Windows fonts
graphical resolution (pixels)
640x480
640x480
800x600
800x600 , 1024x768
Power supply
24 V DC (20 – 30 V)
24 V DC (20 – 30 V)
24 V DC (20 – 30 V)
24 V DC (20 – 30 V)
Internal memory capacity
12 MB (expandable)
12 MB (expandable)
12 MB (expandable)
12 MB (expandable)
Memory card (intern./extern.)
2 (compact flash 4 – 1024 MB)
2 (compact flash 4 – 1024 MB)
2 (compact flash 4 – 1024 MB)
2 (compact flash 4 – 1024 MB)
Display unit
Keyboard type
Function keys
internal
external
E1100 / E1100 Pro+
Using an E1000 Pro+ operator
terminal gives the user all the
functionality of the standard
E1000 family but also makes it
possible to view external files
such as PDF files, HTML pages
and PowerPoint presentations
directly on the screen of the
operator terminal.
The DT1151 is an industrial
monitor with a 15" TFT-LCD
touch screen, designed to be
mounted in a cabinet and connected to an industrial PC. The
monitor is optimized for a max.
resolution of 1024x768 pixels.
Membrane
Touch-panel
Membrane
Touch-panel
16 (8 with integrated LEDs)
Touch keys
20 (10 with integrated LEDs)
Touch keys
Max. 64 (optional with MAC-E-Key16) Max. 64 (optional with MAC-E-Key16) Max. 64 (optional with MAC-E-Key16) Max. 64 (optional with MAC-E-Key16)
LED indicators
18
1 (Power ON)
20
1 (Power ON)
serial
RS232C, RS422, RS485
RS232C, RS422, 485
RS232C, RS422, RS485
RS232C, RS422, 485
parallel
—
—
—
—
others
USB
USB
USB
USB
Interface slot for optional cards
1
1
1
1
Real-time clock
Integrated
Integrated
Integrated
Integrated
Network communication possibilities
Ethernet TCP/IP, Modbus TCP, MPI
Ethernet TCP/IP, Modbus TCP, MPI
Ethernet TCP/IP, Modbus TCP, MPI
Ethernet TCP/IP, Modbus TCP, MPI
(all integrated); Profibus/DP (optional) (all integrated); Profibus/DP (optional) (all integrated); Profibus/DP (optional) (all integrated); Profibus/DP (optional)
IP Rating (front panel)
IP65
IP65
IP65
IP65
Dimensions WxHxD (mm)
285x177x62
219x154x61
382x252x64
302x228x64 , 398x304x60
Weight (kg)
1.3
1.1
2.3
2.0 / 3.7
156097 / 203302
156098 / 203303
156099 / 203324
156100 / 203325 / DT1151: 203326
Interfaces
Order information
Art. no. 156096 / 203301
Accessories
MITSUBISHI ELECTRIC
Programming software E-Designer (refer to page 40), cables and interface adapters (refer to page 18)
15
OPERATOR TERMINALS E SERIES
3
/// INDUSTRIAL PC'S
왎 Industrial Panel PCs
INDUSTRIAL PCs
4
IPC-MC1121
IPC-MC1151
IPC-VP1151
IPC-VP1171
Personal computers are a part
of everyday life as Industrial PCs
are a part of automation and
process control.
The IPC1000 line based on ETX
technology offers supreme
computing performance with
processors based on Intel®‘s
Celeron®/ Celeron® M technology giving extremely low
power consumption.
The ETX technology permits
scalable CPU performances for
a wide range of industrial applications.
Ruggedly designed for
heavy-duty industrial applications and environments, these
PCs feature high quality, fast
performance, attractive design
and brilliantly legible displays.
A wide operating and storage
temperature range, tough
vibration resistance and high IP
ratings mean these IPCs can be
used in locations users could
never consider before.
The integrated innovative cooling concept realizes passive
and fanless cooling for the
highest processor performance
but at the same time reducing
one of the major moving parts
that could fail.
The CANopen, DeviceNet or
Profibus field buses can optionally be integrated directly on
board of the V panels.
Specifications
Display unit
IPC-MC1121
IPC-MC1151
IPC-VP1151
type
TFT
TFT
TFT
TFT
dimensions (mm)
12.1"
15"
15"
17"
graphical resolution (pixels) 800x600
Power supply
24 V DC
IPC-VP1171
1024x768
1024x768
1280x1024
24 V DC
24 V DC
24 V DC
Processor type
Intel Celereon 800 MHz
Intel Celereon 800 MHz
Intel Celereon M
Intel Celereon M
Processor cooling system
Fanless
Fanless
Fanless
Fanless
Operating system
Windows XP Professional
Windows XP Professional
Windows XP Professional
Windows XP Professional
Internal memory capacity
512 MB RAM
512 MB RAM
512 MB RAM
512 MB RAM
Screen type
Resistive analog touch-panel
Resistive analog touch-panel
Resistive analog touch-panel
Resistive analog touch-panel
Integrated harddisk
40 GB
40 GB
40 GB
40 GB
LED indicators
1 (Power ON)
1 (Power ON)
1 (Power ON)
1 (Power ON)
1 x RS232C
1 x RS232C
2 x RS232C
2 x RS232C
Interfaces
serial
2 x USB (2 x rear side)
2 x USB (2 x rear side)
5 x USB (1 x front; 4 x rear side)
5 x USB (1 x front; 4 x rear side)
LAN network interface
others
1 x 10/100
1 x 10/100
1 x 10/100, 1 x 100/1000
1 x 10/100, 1 x 100/1000
Free card slots
—
—
2 x PCI, PCMCIA slot optional
2 x PCI, PCMCIA slot optional
Field busses
CANopen or DeviceNet or Profibus
CANopen or DeviceNet or Profibus
CANopen or DeviceNet or Profibus
CANopen or DeviceNet or Profibus
Internal Drives
CompactFlash, HDD optional
CompactFlash, HDD optional
CompactFlash, HDD optional
CompactFlash, HDD optional
IP Rating
IP65 (front)
IP65 (front)
IP65 (front)
IP65 (front)
Operating temperature range
0 – 50 °C
0 – 50 °C
0 – 50 °C
0 – 50 °C
Storage temperature range
-20 – +60 °C
-20 – +60 °C
-20 – +60 °C
-20 – +60 °C
Operating humidity range
20 – 85 % (no condensation)
20 – 85 % (no condensation)
20 – 85 % (no condensation)
20 – 85 % (no condensation)
Vibration resistance
1 G: resistant to vibrations from 10 – 500 Hz along all 3 axes (acc. to EN 60068-2-6)
Dimensions WxHxD (mm)
380x300x53
Order information
16
Art. no. 204305
452x362x57
450x354x158
461x399x166
204306
204307
204308
MITSUBISHI ELECTRIC
ACCESSORIES ///
왎 Special Interface Adapter and Cables for Operator Terminals GT15/GT16
Adapter type (use)
MELSEC A-Bus interface
MELSEC Q-Bus interface
Ethernet RJ45
Serial interface
CC-Link interface
MELSECNET/10/H
Interface name
Application
GT15-75ABUSSL
GT15/GT16 (1 channel), slim model
166243
GT15-ABUS
GT15/GT16 (1 channel), standard model
169467
GT15-75ABUS2SL
GT15/GT16 (2 channels), slim model
166304
GT15-ABUS2
GT15/GT16 (2 channels), standard model
169468
GT15-75QBUSSL
GT15/GT16 (1 channel), slim model
166305
GT15-QBUS
GT15/GT16 (1 channel), standard model
169465
GT15-75QBUS2SL
GT15/GT16 (2 channels), slim model
166306
GT15-QBUS2
GT15/GT16 (2 channels), standard model
169466
GT15-J71E71-100
GT15
166309
GT15-RS2-9P
GT15/GT16 (serial interface RS232, 9-pin D-Sub)
169469
GT15-RS2T4-9P
GT15/GT16 (converter RS232 -> RS422; 9-pin D-Sub)
166307
GT15-RS4-9S
GT15/GT16 (serial interface RS422/485, 9-pin D-Sub)
169470
GT15-RS4-TS
GT15/GT16 (serial interface RS422/485, screw terminals)
169471
GT15-RS2T4-25P
GT15/GT16 (converter RS232 -> RS422; 25-pin D-Sub)
166308
GT15-J61BT13
GT15/GT16
203494
Order number
GT15-J71GP23-SX
GT15/GT16, CCLink IE interface, 1 GBaud, optical ring
218576
GT15-J71BR13
GT15/GT16 (for coaxial connection)
229843
GT15-J71LP23-25
GT15/GT16 (for optical SI cable)
GT15/GT16 (for USB connection to pictbridge compatible
printers)
GT15 option card with 48 MB expansion memory and
MES functionality
GT16 option card with MES functionality
229842
USB
GT15-PRN
MES option card (for direct
database connection)
GT15-MESB48M
Option card
Application
GT15-FNB
Option card for the use of special functions
(without System Q support)
166313
GT15-QFNB
Option card for the use of special functions
(with System Q support)
166314
GT15-QFNB16M
Option card for the use of special functions
(with System Q support and 16 MB expansion memory for project data)
166315
GT15-QFNB32M
Option card for the use of special functions
(with System Q support and 32 MB expansion memory for project data)
166316
GT15-QFNB48M
Option card for the use of special functions
(with System Q support and 48 MB expansion memory for project data)
166317
GT15-MESB48M
Option card for the use of additional MES functionality
(with System Q support and 48 MB expansion memory for project data)
203473
Video unit
Application
GT15V-75V4
Video input unit for GT15 video compatible models, 4 x NTSC/PAL inputs
203497
GT15V-75R1
Video input unit for GT15 video compatible models, 1 x RGB composite input
203498
GT15V-75V4R1
Video input unit for GT15 video compatible models, 4 x NTSC/PAL inputs,
1 x RGB composite input
203499
GT15V-75ROUT
Video input unit for GT15 video compatible models, 1 x RGB composite output
203500
GT16M-MMR
GOT multimedia option board for GT16 HMIs
221362
GT16M-V4
GOT Video Input Unit for GT16 HMIs, 4x NTSC/PAL inputs 75 Ohm
221363
GT16M-V4R1
GOT Video Input Unit for GT16, 4x NTSC/PAL inputs, 1x RGB composite input
221364
GT16M-R2
GOT Video Input Unit for GT16 HMIs, 2x RGB composite input
221365
GT16M-ROUT
GOT Video Output Unit for GT16, 1x RGB composite output
221366
GT16M-MESB
170169
5
203473
221369
왎 Option Cards for GT15
The operator terminals of the GT15 series are
able to use several special functions built into
the terminal. To use multi-channel communication, document display, System Q ladder
monitor and MES functionality an option
board is required. They are fitted in the expansion slot on the rear side of the terminal and
are recognized automatically by the GT15.
Further details on request.
Order number
왎 Video Interfaces for GT15/GT16
Video interfaces can be used with the
GT15/GT16 video panels to support video
functions. With the help of these interfaces,
images from PC's, cameras and vision sensors
can be monitored on the GOT.
Further details on request.
MITSUBISHI ELECTRIC
Order number
17
ACCESSORIES
The HMI communications and interface
adapters support connection directly to a
PLC or directly to a network.
All GT15 modules can be used for the new
GT16 terminals, too, except the Ethernet
module GT15-J71E71-100.
Further details on request.
/// ACCESSORIES
왎 Cables
For all GOT and E series operator terminals
is a wide variety of different cables available.
All cables have to be ordered separately
due to the specific application.
The length for all cables is 3.0 m, if not differently indicated.
Operator terminal
Interface
Connector
Cable
Connector
Periphery
Order number
GT1000 series
Frontside
USB
MINI-B
USB
GT09-C20USB-5P
USB-A
Personal Computer
166373
(2 m length)
integrated RS232
D-SUB male
connector 9 pin
GT01-C30R2-6P
MINI-DIN male
connector 6 pin
MELSEC System Q
163959
integrated RS422 or D-SUB male
GT15/GT16 adapter connector 9 pin
GT01-C30R4-8P
MINI-DIN male
connector 8 pin
MELSEC FX
163948
further lengths on request
integrated RS422 or D-SUB male
GT15/GT16 adapter connector 9 pin
GT01-C30R4-25P
D-SUB male
MELSEC AnS/QnAS
163953
connector 25 pin
and AnU/QnA further lengths on request
Mini-DIN male
connector 6-pin
GT01-C30R2-6P
D-SUB male
connector 9 pin
PC
163959
(except GT1020/GT1030)
GT1000 series
(except GT1020/GT1030)
GT1000 series
(except GT1020/GT1030)
GT1000 series
(except GT1020/GT1030)
ACCESSORIES
5
GT1020 / GT1030
RS232
Programming cable
GT1020 / GT1030
RS422
open
terminals
GT10-C30R4-8P
MINI-DIN male
connector 8 pin
MELSEC FX
200494
further lengths on request
GT1020 / GT1030
RS232
open
terminals
GT10-C30R2-6P
MINI-DIN male
connector 6 pin
MELSEC System Q
200498
GT1020 / GT1030
RS232
Mini-DIN male
connector 6-pin
GT10-RS2TUSB-5S
MINI-B
USB
PC +
GT09-C20USB-5P
200500 +
166373
GT15 / GT16
A-BUS
GT15-A1SC30B
A-BUS
166358
MELSEC AnS/QnAS further lengths
on request
GT15 / GT16
A-BUS
GT15-AC30B
A-BUS
MELSEC AnS/QnAS
166380
and AnU/QnA further lengths on request
GT15 / GT16
Q-BUS
GT15-QC30B
Q-BUS
166348
MELSEC System Q further lengths
on request
18
MITSUBISHI ELECTRIC
ACCESSORIES ///
왎 Cables
Operator terminal
Interface
Connector
Cable
Connector
GT16
RS422/RS485
female ribbon cable
connector 14 pin
GT16-C20R4-9S*
D-SUB male
connector 9-pin
Periphery
Order number
0.2 m: 221380
GT16
RS422/RS485
D-SUB male
connector 9 pin
FA-LTBGTR4CBL05
Terminal block
0.5 m: 221381
GT16
RS422/RS485
D-SUB male
connector 9 pin
FA-LTBGTR4CBL10
Terminal block
1.0 m: 221382
GT16
RS422/RS485
D-SUB male
connector 9 pin
FA-LTBGTR4CBL20
Terminal block
2.0 m: 221383
ACCESSORIES
5
E1000
RS232
D-SUB female
connector 9 pin
CAB30
D-SUB female
connector 9 pin
Personal Computer
163002
E1000
RS422
D-SUB male
connector 25 pin
CAB19
MINI-DIN male
connector 8 pin
MELSEC FX
146861
E1000
RS422
D-SUB male
connector 25 pin
CAB18 (MAC40-CPU-CAB-R4)
E1000
RS422
D-SUB male
connector 25 pin
CAB17
MINI-DIN male
connector 6 pin
MELSEC System Q
E1000
RS232
D-SUB male
connector 9-pin
CAB34/3
MINI-DIN male
connector 6 pin
163006
MELSEC System Q further lengths
on request
E1000
RS422
D-SUB male
connector 25 pin
CAB36
D-SUB male
connector 9 pin
Siemens S7/MPI
direct
D-SUB male
MELSEC AnS/QnAS
146855
connector 25 pin
and AnU/QnA further lengths on request
140472
205178
* GOT RS422/RS485 cable adapter, 0.2 m. This adapter is to be used with a standard GOT1000 communication cable, e.g. GT01-C30R4-8P.
MITSUBISHI ELECTRIC
19
/// ACCESSORIES
왎 Cables for Third Party Manufacturers
CAB30 is a connection cable for E1000
series terminals, it connects the Siemens
HMI adapter for MPI with the RS232 port.
CAB8 is a communications adapter for
RS485 networks by using the RS422 port.
CAB11 is an HMI adapter cable for the connection of a Siemens SIMATIC S7/MPI with
CAB30 (for E1000 series).
These cables can only be used for the connection of an GOT1000 or E1000 operator
terminal to a Third Party Manufacturer PLC.
They all have the name CAB with a specific
number.
Operator terminal
GOT1000 or E1000
series
Cable
D-SUB male
connector
Connector
Periphery
Depends on the PLC
of the third party Third party PLC
manufacturer
CAB8 / CAB11 / CAB30
Order number
Refer to the table below
CAB30
CAB8
CAB11
CAB36
Application for
Siemens HMI adapter for MPI
RS485 networks
Siemens S7/MPI
Siemens S7/MPI
Length
ACCESSORIES
RS232 / RS422
Connector
Specifications
Interfaces
5
Interface
CAB11 can also be used for GOT1000 series
(with selfmade GT11+GT15 cable).
Below an example is shown.
Order information
HMI RS232 (E1000)
RS422 (E series)
RS232 (all GOT1000 / E series)
RS422 (E1000)
PLC RS232
RS485
RS232
MPI (9 pin D sub)
—
3.0
3.0
124268
132351
205178
m 3.0
Art. no. 163002
왎 Special Connection Cables for the Graphic Handy Operator Terminals
Connection of the Handy Operator Terminals to the PLC CPU
The cable is connected to the plug on the
back side of the GT11 handy GOT, which
provides a larger operating range than fixed
mounted terminals. The cable is lead into
the cabinet or panel and enables the mobile
Operator terminal
Interface
GT11
Handy
External cable
GT11
Handy
External cable
GT11
Handy
GT11
Handy
햲
connection of the Handy GOT using the
interface in a cabinet or control panel. The
GT11 handy terminals carry a bayonet-joint
at the lower end of the unit.
Cable
GT11H-C30-37P
GT11H-C60-37P /
GT11H-C100-37P
Switch cabinet
Cable
Connector
Periphery
GT11H-C15R4-8P
MINI-DIN male
connector 8 pin
MELSEC FX
GT11H-C30-37P
GT11H-C60-37P /
GT11H-C100-37P
GT11H-C15R4-25P
D-SUB male
connector 25 pin
AnS/QnAS, AnU/QnA
External cable
GT11H-C30-37P
GT11H-C60-37P /
GT11H-C100-37P
GT11H-C15R2-6P
MINI-DIN male
connector 6 pin
MELSEC System Q
External cable
GT11H-C30 /
GT11H-C60 /
GT11H-C100
open terminals
Computer-Link,
Inverters,
Servo amplifiers
Cable type
Connector 1
Connector 2
GT11H-C30-37P /
GT11H-C60-37P /
GT11H-C100-37P
External cable for GT11 handy
Round female connector 32 pin
D-SUB male connector 37 pin
GT11H-C30 /
GT11H-C60 /
GT11H-C100
External cable for GT11 handy
Round female connector 32 pin
Open terminals
Further connections
—
—
Applicable CPU type
Length
Order information
20
햲
These cables with open terminals can be used for the connection to serial communication modules, Computer-Link, inverters, and servo amplifiers.
Specifications
햲
From there it is easy to connect the line to
the PLC.
햲
—
m 3.0 / 6.0 / 10.0
Art. no. 191013 / 191014 / 191015
GT11H-C15R4-8P
GT11H-C15R4-25P
GT11H-C15R2-6P
Factory automation periphery
3.0 / 6.0 / 10.0
Relay cable
D-SUB female connector 37 pin
MINI-DIN male connector 8 pin
For power supply and external
signals
MELSEC FX family
1.5
Relay cable
D-SUB female connector 37 pin
D-SUB male connector 25 pin
For power supply and external
signals
MELSEC AnS/QnAS and AnU/QnA
1.5
Relay cable
D-SUB female connector 37 pin
MINI-DIN male connector 6 pin
For power supply and external
signals
MELSEC System Q
1.5
191016 / 191017 / 191018
191019
191020
191021
For the connection of the PLC CPU a further cable is required (GT11H-C15R4-8P for MELSEC FX CPU or GT11H-C15R4-25P for MELSEC AnS/QnAS CPU or GT11H-C15R2-6P for MELSEC System Q CPU)
MITSUBISHI ELECTRIC
ACCESSORIES ///
왎 General Accessories
Screen surface protection
Protective film sheets protect the sensitive screen
of the unit from scratches and reflections.
Stands
For the GT10/GT11 and GT15/GT16 terminals
stands for table-top installation are available. The
stands are useful for debugging the GOT screen
data, as they can set the GOT at a proper angle on
the table.
Keyboard extension X-Key-16
For all E1000 series graphical operator terminals
the keyboard extension X-Key-16 is available.
Up to 4 keyboard extensions can be connected to
one operator terminal.
The keyboard extension provides 16 function keys
and LEDs, which can be used and programmed as
the standard integrated keyboard.
Specifications
GT1020PSCB
Type of accessory
Protective film sheets for the display surface
Use for operator terminal
GT1020
GT1030
GT11
Set of
5
5
206973
Order information
Art. no. 200501
GT1030PSCB
GT1150PSCB
GT11H50PSC
GT1550PSCB
GT1560PSCB
GT1570PSCB
GT1580PSCB
GT1590PSCB
GT1660PSCB
GT1670PSCB
GT11H
handy
GOTs
GT155x
with 5.7"
display
GT15
with 8.4"
display
GT15
GT15
GT15
with 10.4" with 12.1" with 15"
display
display
display
GT16
with 8.4"
display
GT16
GT16
GT16
with 10.4" with 12.1" with 15"
display
display
display
5
5
5
5
5
5
5
5
5
5
5
163645
191023
203501
166329
166333
166337
169476
221959
221958
221958
221370
E1071 Touch
E1061/63
E1041/43
E1070 ProtectiE1060 ProtectiE1032 ProtectiProtection
Touch ProtectiTouch Protection sheet
on Sheet
on Sheet
sheet
on Sheet
on Sheet
Specifications
GT1680PSCB
GT1690PSCB
E1101 Touch
E1100 ProtectiProtection
on sheet
sheet
E1151 Touch
Protection
sheet
Type of accessory
Protective film sheets for the display surface
Use for operator terminal
E1032
E1041/43
E1060
E1061/63
E1070
E1071
E1100
E1101
E1151
Set of
1
1
1
1
1
1
1
1
1
206837
206838
206839
168155
168122
168156
168123
168154
Order information
Art. no. 206836
Specifications
GT05-50STAND
GT15-70STAND
GT15-80STAND
GT15-90STAND
GT15-BAT
X-Key-16
Buffer battery for realtime External keyboard extenclock and historical data
sion for E1000 series
backup
Type of accessory
Stand for table-top installation
Use for operator terminal
GOT1000 with
5.7" display
GOT1000 with
8.4" and 10.4" display
GOT1000 with
12.1" display
GOT1000 with
15" display
GT15/GT16
Set of
1
1
1
1
1
1
Details
Order information
—
Art. no. 203502
MITSUBISHI ELECTRIC
All E1000 series models
—
—
—
Lithium battery
Connection via
RS232C/RS422
166341
166342
218577
166345
217656
21
ACCESSORIES
5
/// ACCESSORIES
왎 Communications Adapter
Profibus/DP Communications adapter
For the E1000 series a Profibus/DP Slave
adapter E1000-EM-Profibus/DP is available.
This is attached at the extension port at the
rear side of the control terminal. The
parametrization and setting of the network
address are made in the software E-Designer.
Specifications
E1000-EM-Profibus/DP
Use for operator terminal
E1000 series
Type
Adapter
Application
Profibus/DP Slave
Order information
ACCESSORIES
5
Art. no. 169488
왎 Interfaces and Adapters for GOT1000
Several adapters and interfaces for different
GOT1000 models are available.
Further details on request.
Optional unit
Application
GT15-DIO
Optional interface for digital I/Os, 16 (max. 128) inputs, 16 outputs
209827
GT15-DIOR
Digital I/O-card for GT15/GT16, 16 inputs, 16 outputs, negative common input
221953
GT01-RS4-M
RS-485 Multi-drop master unit, 16 GOTs to one FX/Q PLC
225497
GT10-9PT5S
GOT RS-485 adapter for GT10 QVGA and GT11 QVGA models, 9-pin DSUB
225498
GT10-50FMB
GOT data transfer memory board for GT105x
218493
Order number
왎 Interface Converter CR01-R2/R4 SET and CR01-R4/R4
CR01-R2/R4 SET and CR01-R4/R4
These modules are signal repeater with
electrical isolation for RS422 signals.
The regular maximum distance between
two CR01 modules is 1200 m.
Specifications
CR01-R2/R4 SET
CR01-R4/R4
Conversion
RS232«RS422
RS422«RS422
RS422 interface
Terminal strip + 25 pin D-SUB male connector for both units
RS232 interface
9 pin D-SUB male connector
—
Nominal voltage
V AC 115 / 230
115 / 230
Voltage range
V AC 90 – 130 / 150 – 255
90 – 130 / 150 – 255
Supply frequency range
Hz 48 – 62
48 – 62
Power consumption
VA 6
6
Protection rating
Weight
Order information
22
If only one interface converter is in use,
the maximum distance is 500 m.
The modules include a DIN rail adapter and
LEDs indicating the flow of data.
IP20
IP20
kg 0.55
0.55
Art no. 56172
56173
MITSUBISHI ELECTRIC
DIMENSIONS ///
113
Switchboard cutout
13*
74
65
66 +1-0
13*
왎 GT1020-LBL, GT1020-LBD, GT1020-LBD2, GT1020-LBLW, GT1020-LBDW, GT1020-LBDW2
27
105 +1-0
* A space of at least 13 mm at the long side
of the GOT is required to allow for the
attachment of mounting fixtures.
All dimensions in mm
왎 GT1030-LBD, GT1030-LBD2, GT1030-LBDW, GT1030-LBDW2
145
84
10
DIMENSIONS
10
6
4.5
84
10
84
21
Switchboard cutout
66 +-01
13*
25
29.5
10
65
76
max. 80
* A space of at least 13 mm at the long side
of the GOT is required to allow for the
attachment of mounting fixtures.
137+-01
MITSUBISHI ELECTRIC
13*
All dimensions in mm
23
/// DIMENSIONS
왎 GT1040, GT1045
103 +1
–0
102
112
5
Switchboard cutout
130 +1
–0
41
139
All dimensions in mm
왎 GT1050, GT1055
121 +2
–0
RS422
135
6
120
RS232
6
*
R
7
X
*
W
V
L
]
H
V
7
D
S
P
H
D
V
D
Q
H
)
O
F
X
*
W
2
7
USB
DIMENSIONS
Switchboard cutout
+2
153 –0
56
164
All dimensions in mm
왎 GT1150HS-QLBD / GT1155HS-QSBD
18
75
72
62
209
204
16
50
3.5
168
74
176
All dimensions in mm
24
MITSUBISHI ELECTRIC
DIMENSIONS ///
왎 GT1150-QLBD, GT1155-QSBD
164
164
10
135
135
120
10
120
120
5
164
53
+2
–0
152
135
+2
–0
53
Switchboard cutout
153 x 121
47
120
All dimensions in mm
6
DIMENSIONS
왎 GT1550-QLBD, GT1555-QSBD, GT1555-QTBD, GT1555-VTBD
167
135
Switchboard cutout
153 x 121
+2
–0
10
120
10
110
+2
–0
60
6
5
110
152
All dimensions in mm
MITSUBISHI ELECTRIC
25
/// DIMENSIONS
왎 GT1562-VNBA, GT1565-VTBA
GT1562-VNBD, GT1565-VTBD
241
190
Switchboard cutout
227 x 165
+2
–0
10
175
10
175.5
+2
–0
52
6
56
5
175.5
226
All dimensions in mm
DIMENSIONS
6
왎 GT1572-VNBA, GT1575-VNBA, GT1575-VTBA, GT1575-STBA
GT1572-VNBD, GT1575-VNBD, GT1575-VTBD, GT1575-STBD
Switchboard cutout
289 x 200
+2
–0
+2
–0
All dimensions in mm
26
MITSUBISHI ELECTRIC
DIMENSIONS ///
왎 GT1585-STBA, GT1585-STBD
316
10
227
242
10
263
+2
–0
52
+2
–0
6
Switchboard cutout
302 x 228
56
5
250
301
All dimensions in mm
6
DIMENSIONS
왎 GT1595-XTBA, GT1595-XTBD
10
397
281
296
320
Switchboard cutout
383.5 x 282.5
+2
–0
6
61
5
10
320
+2
–0
382
All dimensions in mm
MITSUBISHI ELECTRIC
27
/// DIMENSIONS
왎 GT1665M-STBA, GT1665M-STBD, GT1665M-VTBA, GT1665M-VTBD
241
Switchboard cutout
227 x 167
+2
–0
10
175
190
10
175.5
+2
–0
56
52
6
175.5
226
All dimensions in mm
왎 GT1675M-STBA, GT1675M-STBD, GT1675M-VTBA, GT1675M-VTBD
303
214
199
10
252
Switchboard cutout
289 x 200
+2
–0
+2
–0
222
56
49
6
10
DIMENSIONS
6
+2
–0
+2
–0
288
All dimensions in mm
28
MITSUBISHI ELECTRIC
DIMENSIONS ///
왎 GT1685M-STBA, GT1685M-STBD
316
10
242
227
10
240
240
Switchboard cutout
302 x 228
52
6
+2
–0
56
+2
–0
All dimensions in mm
왎 GT1695M-XTBA, GT1695M-XTBD
397
296
281
10
320
61
6
10
320
Switchboard cutout
383.5 x 282.5
+2
–0
+2
–0
10
382
10
All dimensions in mm
MITSUBISHI ELECTRIC
6
DIMENSIONS
301
29
/// DIMENSIONS
왎 E1022
COM2
RS232
Switchboard cutout
138 × 120
COM1
RS422/485
6
118
18.6
6.5 –9.0 mm
155.2
7.5 mm minimum thickness
9.9
136.1
155.2
9.2
18.6
40.6
34.6
24 V DC
All dimensions in mm
왎 E1032
Switchboard cutout
166 × 149
COM2
RS232
COM1
RS422/485
163.4
202
9.8
19.3
USB
Ethernet
187
Dip switches
147.4
DIMENSIONS
6
A
max. 7.5
56.9
62.9
All dimensions in mm
30
MITSUBISHI ELECTRIC
DIMENSIONS ///
왎 E1041 / E1043
Switchboard cutout
139 × 105
COM1
RS422/485
COM2
RS232
9.7
137.4
119
102.7
9
155.8
A
max. 7.2
56.8
A
62.8
왎 E1060 / E1062
Switchboard cutout
240 × 130
COM1
RS422/485
COM2
RS232
18.8
63.3
57.3
237.4
275
17.7
max. 7.5
USB
168
128.5
CF memory
card
Battery
CF
Dip switches
Ethernet
A
A
All dimensions in mm
MITSUBISHI ELECTRIC
6
DIMENSIONS
All dimensions in mm
31
/// DIMENSIONS
왎 E1061 / E1063
Switchboard cutout
180 ×130 mm
COM1
RS422/485
COM2
RS232
62.8
56.6
178.6
12.4
max. 7.5
10.9
201
152
128.7
CF memory
card
Battery
Dip
CFswitches
USB
Ethernet
A
A
All dimensions in mm
왎 E1070
139±1
246±1
Switchboard cutout
244
285
20
27
177
134
DIMENSIONS
6
A
24 V DC
A
max. 9
56
62
All dimensions in mm
32
MITSUBISHI ELECTRIC
DIMENSIONS ///
왎 E1100
208±1
343±1
Switchboard cutout
342
22
252
207
23
382
A
max. 9
24 V DC
58
64
A
왎 E1071
137,5±1
137.5±1
188,5±1
188±1
Switchboard cutout
187
219
136
154
6
21
max. 9
55
61
All dimensions in mm
MITSUBISHI ELECTRIC
6
DIMENSIONS
All dimensions in mm
33
/// DIMENSIONS
왎 E1101
206±1
264,5±1
Switchboard cutout
263
25
204
228
13
302
max. 9
58
64
All dimensions in mm
왎 E1151
354
398
14
22
304
277
DIMENSIONS
6
max. 9
Switchboard cutout
278.5±1 x 355.5±1 mm
60
66
All dimensions in mm
34
MITSUBISHI ELECTRIC
DIMENSIONS ///
왎 DT1151
56
22
354
398
277
304
14
50
All dimensions in mm
왎 Keyboard Extension X-Key-16
Rubber gasket
included
28
5.5
15
200
22
80
110
Text strips
RS-485
13
15
Rubber gasket
RS-232
Max. 80
RS-422
24 V DC
9.5
168
22.5
95
Switchboard cutout
2
Max. 16
Min. 14
88±4
100
95
6
6 × Ø3,5
186±1
All dimensions in mm
MITSUBISHI ELECTRIC
35
DIMENSIONS
6
/// DIMENSIONS
왎 IPC-MC1121
380
343
46.75
14.75
83.5
127.5
300
273
255
116.5
127.5
6
9.5
325
Switchboard cutout
325 × 255
All dimensions in mm
왎 IPC-MC1151
6
51.25
19.25
322.5
128.75
161.25
452
415
161.25
71.25
362
335
DIMENSIONS
6
400
9.5
Switchboard cutout
400 × 322.5
All dimensions in mm
36
MITSUBISHI ELECTRIC
DIMENSIONS ///
왎 IPC-VP1151
6
152.75
34.25
311
354
327
277
449.4
422.4
372.4
406.4
Switchboard cutout
406.4 × 311
All dimensions in mm
DIMENSIONS
6
왎 IPC-VP1171
461
434
361
160
41.5
399
372
299
356
6
418
Switchboard cutout
418 × 356
All dimensions in mm
MITSUBISHI ELECTRIC
37
/// SOFTWARE AND PROGRAMMING
MELSOFT – Programming and Documentation Software for Standard Personal Computers
With the MELSOFT software family Mitsubishi Electric offers efficient software packages
helping to reduce programming and setup times to a high degree.
The MELSOFT software family provides instant access, direct communications, compatibility, and open exchange of variables.
The MELSOFT family comprises:
앬 Programming packages like GX Developer and GX IEC Developer
앬 Software for a dynamic data exchange like MX Change
앬 Visualization software like for example MX4 HMI
앬 Programming software for GOT operator terminals GT-Works
앬 Programming software for E series operator series E-Designer
앬 PC-based HMI systems for GOT operator terminals GT SoftGOT1000
For detailed information please order our separate MELSOFT brochure.
왎 Visualization Software MX4 HMI
MX4 HMI
MX4 HMI is a reduced version of MX4 SCADA. It includes many of the functions of
MX4 SCADA, but has been designed for standalone HMI applications.
The main features are:
앬 A large number of I/O points ranging from 100 to a maximum of 600, with the ability to
connect to three different types of drivers.
앬 It is a scalable solution that can be upgraded from a HMI to a SCADA solution and then
7
have additional upward connectivity to business systems.
앬 Basic functions like alarms, trend analysis and reports have been set-up and are
SOFTWARE & PROGRAMMING
ready-to-use, saving you time and the expertise needed to program them.
앬 The use of super genies enables you to save repetitive machinery processes, and repli-
cate the process by a click of a button. This saves time and the cost of skilled labour, allowing a complex task to be performed much more simply.
Specifications
System
requirements
computer
memory
Run-Time version
Pentium based 266 MHz or compatible PC with MS Windows NT®,
MS Windows 2000® or MS Windows XP®
Min. 96 MB (MS Windows NT®)
Free harddisk space
200 MB
Networks
TCP/IP (using ETHERNET), UDP
Operating system
MS Windows NT/2000® or MS Windows XP®
Driver
FastLinx (included with MX4)
Order information
38
Development version/ Demo version
Art. no. 153421
On request
MITSUBISHI ELECTRIC
SOFTWARE AND PROGRAMMING ///
왎 GT Works (GT SoftGOT1000 and GT Designer)
GT Works
GTWorks is a wide-ranging programming and visualization control tool from Mitsubishi.
Included are the two main program parts GT SoftGOT1000 and GT Designer as well as a HMI
simulator and a converter for former projects. The software language is English, a German
version is also available. Please remark when ordering.
GT Designer
As part of GTWorks, GT Designer is a drawing program designed to create HMI screens for all
GOT series. A user-friendly Windows environment provides the user with a simple and
recognisable interface, reducing the time of their learning curve and the training costs associated with it. The package consists of:
앬 An extensive picture and graphics library editor that enables you to modify the
graphics to meet your exact specifications.
앬 A tree format of the project gives you an overview of the structure of the project. This
gives you the opportunity to navigate through your project and add, delete or move
any programs or functions, creating a more logical flow to your menu structure.
앬 The combination of GT Simulator and
GX Simulator allows you to test both
the HMI and PLC coding offline, on your
PC without the need to connect to
physical hardware.
앬 Configuration of up to ten languages in
the application, easy to edit by using
the open Excel format
Specifications
GTWorks: GT Designer
Application for
All GOT operator terminals
Software language
English, German*
Operating system
MS Windows 2000®, MS Windows® XP, MS Windows Vista®
System requirements
PC with at least 1 GHz CPU, 512 MB RAM and 1.5 GB free harddisk space
Required computer interface
RS232C, USB, Ethernet
Order information
Full version English: GT Works2: 220028
2 licences and more 220031
Works3: 230020
2 licences and more 230021
Art. no. Full version German: GT
GT Works2: 216916
2 licences and more 216917
GT Works3: in preparation, more details on request
앬 Platform independent, screens created can be used for software-based HMIs or hard-
ware based GOT HMIs.
Remote monitoring and operation by intranet LAN is possible.
E-mail support for alarms
Recording of historical Data in user-friendly formats
Communication with MELSEC PLCs via serial communication, USB (to System Q port),
CC-Link IE PC card or Ethernet possible
앬 Windows and Microsoft programs can be accessed from within GT SoftGOT1000.
앬
앬
앬
앬
Specifications
All GOT operator terminals
Software language
English, German*
Operating system
MS Windows 2000®, MS Windows® XP, MS Windows Vista®
System requirements
PC with at least 1 GHz CPU, 512 MB RAM and 1.5 GB free harddisk space
Required computer interface
RS232C, USB, Ethernet
Required dongle interface
USB or parallel port (dongle included in the package)
Order information
*A german version of GT Works3 is in preparation.
*More Details on request.
MITSUBISHI ELECTRIC
GT Works: GT SoftGOT1000
Application for
Art. no.
Runtime version English with USB dongle:
Runtime version English with parallel port dongle:
Runtime version German with USB dongle:
Runtime version German with parallel port dongle:
214653
214650
210822
210820
39
SOFTWARE & PROGRAMMING
7
A major benefit of GT SoftGOT1000 is that visualisation screens can be created independently of their final target platform, i. e. a hardware platform such as GOT1000 or a PC based
platform such as GT SoftGOT1000. This is a PC based HMI module within GTWorks. A further
benefit of GT SoftGOT1000 is that it inherits the advanced simulation features of GTWorks. It
can be simulated in a stand-alone configuration or in conjunction with GX Simulator, linking
both PLC and HMI simulation code for a true integrated approach.
/// SOFTWARE AND PROGRAMMING
Programming HMI
왎 E-Designer
Programming Software for all E Series Operator Terminals
The programming software E-Designer provides easy creation of projects for all control
units in the E series.
The block manager displays the application graphically and clearly and saves time for the
creation.
E-Designer supports the following languages on the desktop:
english, german, spanish, italian, french, swedish
앬
앬
앬
앬
앬
앬
앬
Specifications
E-Designer V0750-1LOC-M
Application
All E series control units
Software language
English, german, spanish, italian, french, swedish
Storage media
CD-ROM
E-Designer V0750-1LOC-M-UP
Operating system
MS Windows 98®, MS Windows ME®, MS Windows NT 4.0®, MS Windows 2000®, MS Windows® XP
System requirements
PC with at least 32 MB RAM and 55 MB free harddisk space
Required computer interface
RS232C, Ethernet
Version
Full version 7.50
Order information
Art. no. 217647
E-Designer V0750-1LOC-M-UPD
Upgrade version (from version 6.x to 7.x)
Update version (minor version change in version 7.x)
217648
217649
SOFTWARE & PROGRAMMING
7
Full support of the Windows editing functions (e.g. cut, copy, paste etc.)
Extensive documentation and storage functions
Different projects can be edited simultaneously.
Multi-language support for up to 10 languages in the application
The name list is compatible to GX IEC Developer.
E-Designer is supported by MX-Change.
Simulation mode for E1000 projects
40
MITSUBISHI ELECTRIC
MITSUBISHI ELECTRIC
41
Accessories
E series operator terminals
Cables, general . . . . . . . . . . . . . .
Cables for Handy-GOTs . . . . . . . . .
Cables for Third Party Manufacturers
CR01-R2/R4 SET. . . . . . . . . . . . . .
CR01-R4/R4 . . . . . . . . . . . . . . . .
Interface converter . . . . . . . . . . .
Keyboard extension . . . . . . . . . . .
Option cards. . . . . . . . . . . . . . . .
Protective film sheets . . . . . . . . . .
Stands. . . . . . . . . . . . . . . . . . . .
Video Interfaces . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
18
20
20
22
22
22
21
17
21
21
17
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
20
19
19
19
19
19
19
20
20
19
19
19
18
18
18
18
18
18
18
20
20
20
20
20
20
20
20
20
18
18
18
19
18
Cables
CAB11 . . . . . . . . .
CAB17 . . . . . . . . .
CAB18 . . . . . . . . .
CAB19 . . . . . . . . .
CAB30 . . . . . . . . .
CAB34/3 . . . . . . .
CAB36 . . . . . . . . .
CAB8 . . . . . . . . .
F9GT-HCAB-3M . . .
FA-LTBGTR4CBL05 .
FA-LTBGTR4CBL10 .
FA-LTBGTR4CBL20 .
GT01-C30R2-6P . . .
GT01-C30R4-25P . .
GT01-C30R4-8P . . .
GT09-C20USB-5P . .
GT10-C30R2-6P . . .
GT10-C30R4-8P . . .
GT10-RS2TUSB-5S .
GT11H-C100 . . . . .
GT11H-C100-37P . .
GT11H-C15R2-6P . .
GT11H-C15R4-25P .
GT11H-C15R4-8P . .
GT11H-C30. . . . . .
GT11H-C30-37P. . .
GT11H-C60. . . . . .
GT11H-C60-37P. . .
GT15-A1SC30B . . .
GT15-AC30B . . . . .
GT15-QC30B. . . . .
GT16-C20R4-9S . . .
Overview . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Communications adapter
E1000-EM-Profibus/DP . . . . . . . . . . . 22
Dimensions
E1000 series operator terminals . . . . . 30
GOT series opeartor terminals . . . . . . 23
Industrial PCs . . . . . . . . . . . . . . . . . 36
42
DT1151 . . . .
E1012 . . . . .
E1022 . . . . .
E1032 . . . . .
E1041 . . . . .
E1043 . . . . .
E1060 . . . . .
E1061 . . . . .
E1062 . . . . .
E1063 . . . . .
E1070 . . . . .
E1070 Pro+. .
E1071 . . . . .
E1071 Pro+. .
E1100 . . . . .
E1100 Pro+. .
E1101 . . . . .
E1101 Pro+. .
E1151 . . . . .
E1151 Pro+. .
Introduction .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
15
14
14
14
14
14
14
14
14
14
15
15
15
15
15
15
15
15
15
15
12
GOT series operator terminals
GT1020 . . . .
GT1030 . . . .
GT1040 . . . .
GT1045 . . . .
GT1050 . . . .
GT1055 . . . .
GT1150 . . . .
GT1150HS . .
GT1155 . . . .
GT1155HS . .
GT1550 . . . .
GT1555 . . . .
GT1562 . . . .
GT1565 . . . .
GT1572 . . . .
GT1575 . . . .
GT1575V . . .
GT1585 . . . .
GT1585V . . .
GT1595 . . . .
GT1665M . . .
GT1675M . . .
GT1685M . . .
GT1695M . . .
Introduction.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.8
.8
.8
.8
.8
.8
.9
.9
.9
.9
.9
.9
10
10
10
10
10
10
10
10
11
11
11
11
.6
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
36
16
16
16
16
16
Industrial PCs
Dimensions .
Introduction .
IPC-MC1121 .
IPC-MC1151 .
IPC-VP1151 .
IPC-VP1171 .
Interface Adapter and Cables for
GT15/GT16
CR01-R2/R4 SET. . .
CR01-R4/R4 . . . . .
GT01-RS4-M . . . . .
GT10-50FMB. . . . .
GT10-9PT5S . . . . .
GT15-75ABUS(2)SL.
GT15-75QBUS(2)SL
GT15-ABUS . . . . .
GT15-ABUS2 . . . . .
GT15-DIO. . . . . . .
GT15-DIOR . . . . . .
GT15-J61BT13 . . . .
GT15-J71BR13. . . .
GT15-J71E71-100. .
GT15-J71GP23-SX .
GT15-J71LP23-25. .
GT15-MESB48M. . .
GT15-PRN . . . . . .
GT15-QBUS . . . . .
GT15-QBUS2. . . . .
GT15-RS2-9P. . . . .
GT15-RS2T4-25P . .
GT15-RS2T4-9P . . .
GT15-RS4-9S. . . . .
GT15-RS4-TS . . . . .
GT16M-MESB . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
22
22
22
22
22
17
17
17
17
22
22
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
17
17
17
17
17
17
Cables . . . . . . . . . . . . . . . . . . . .
E series . . . . . . . . . . . . . . . . . . .
GOT series . . . . . . . . . . . . . . . . .
Networks. . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
18
12
.6
.5
Option Cards for GT15
GT15-FNB . . . .
GT15-MESB48M.
GT15-QFNB . . .
GT15-QFNB16M
GT15-QFNB32M
GT15-QFNB48M
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Overviews
Software
E-Designer . . . . . . . . . . . . . . . . . . . 40
GT Works2 . . . . . . . . . . . . . . . . . . . 39
MX4 HMI . . . . . . . . . . . . . . . . . . . . 38
Stands
GT05-50STAND .
GT15-70STAND .
GT15-80STAND .
GT15-90STAND .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
21
21
21
21
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
17
17
17
17
17
17
17
17
17
Video Interfaces for GT15/GT16
GT15V-75R1 . . .
GT15V-75ROUT .
GT15V-75V4 . . .
GT15V-75V4R1 .
GT16M-MMR . .
GT16M-R2 . . . .
GT16M-ROUT . .
GT16M-V4 . . . .
GT16M-V4R1 . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
MITSUBISHI ELECTRIC
Visualisation and productivity /// Visualisation and productivity /// Automation solutions /// Automation solutions /// Automation solutions /// Automation solutions /// Automation
Visualisation
and productivity
A world of
automation solutions
Remote I/Os
Filling tubes
Motion control and servos
Inverters
LV circuit protection
The Business Cycle
Transport
conveyor (OUT)
Laser machines
Pressure
storage tank
Rotational
conveyor
Transport
conveyor (IN)
Frequency Inverter
PLC
Local HMI, plant
wide information
HMI technology can easily consolidate information at one point.
The use of HMI technology has been
increasing as manufacturers increasingly
demand information in realtime. The
boundries between “shop floor” data and
business operation/process data is fast
becoming blurred and places higher
demands on visualisation and data processing tools to span the wide range of
“new” applications.
New challenges
Using visualisation tools to support maintenance has never been high on the
agenda of machine and process engineers,
but if system downtime is considered as
one of the most costly problems manufacturers face, then why not? HMI screen’s can
be configured to easily report on all of the
critical control aspects of a system aiding
efficient problem diagnosis.
14
Robots
In fact some HMIs have the ability to report
errors remotely, even contacting the maintenance team before the line operators are
aware there is a problem. The potential of
visualisation tools to improve process
“uptime” is enormous.
Servo amplifiers
Enterprise PC
(MES/ERP/SCADA)
Fast data retrieval, greater transparency
require simplier and more effiecient control architectures. Because of this the
demand for high reliability SCADA and PC
based solutions is critical especially when
feeding data in to a businesses central MES
and ERP systems. But even now it is possible to see a future trend for embeding
direct MES functionality in to PLC stations
and high function HMIs. This can provide
huge gains for the manufacturer, i.e.;
reducing system complexity by removing a
layer of intermedary PCs; increased data
security by providing quicker respose and
industrialised hardware; localised control
points giving increased access to vital information.
[email protected]
As a manufacturer and supplier of automation products Mitsubishi Electric has long
recognised these key issues and has developed solutions for its own complex production needs. This has resulted in many
innovations such as GOT displays that have
“built in” maintetance screens as well as the
ability to review and monitor PLC programs. Other advances include MES interfaces for direct connection of PLC and HMI
technology to MES SQL databases.
Mitsubishi’s Vision1000 visualisation solutions are a clear part of today’s [email protected]
helping manufacturers increase productivity in a scalable and reliable way.
CNC
controllers
HMI and GOTs
EDM machines
Micro PLCs
Modular PLCs
Mitsubishi offer a wide range of automation equipment from PLCs and HMIs to CNC and EDM machines
A name to trust
Since its beginnings in 1870, some 45 companies use the Mitsubishi name, covering a
spectrum of finance, commerce and industry.
The Mitsubishi brand name is recognized
around the world as a symbol of premium
quality.
Mitsubishi Electric Corporation represents
space development, transportation, semiconductors, energy systems, communications and information processing, audio
visual equipment, home electronics, building and energy management and automation systems, and has 237 factories and
laboratories worldwide in over 121 countries.
This is why you can rely on a Mitsubishi
automation solution – because we know
first hand about the need for reliable, efficient, easy-to-use automation and control.
As one of the world’s leading companies
with a global turnover of 4 trillion Yen
(approximately $40 billion), employing
over 100,000 people, Mitsubishi Electric
has the resource and the commitment to
deliver the ultimate in service and support
as well as the best products.
15
MITSUBISHI
ELECTRIC
Global partner. Local friend.
FACTORY AUTOMATION
HMI
Visualisation Tools
Powerful Communication
Simple Words and Pictures
EUROPEAN BRANCHES
EUROPEAN REPRESENTATIVES
MITSUBISHIELECTRICEUROPEB.V. CZECH REPUBLIC
Radlická 714/113a
CZ-158 00 Praha 5
Phone: +420 (0)251 551 470
MITSUBISHI ELECTRIC EUROPE B.V.
FRANCE
25, Boulevard des Bouvets
F-92741 Nanterre Cedex
Phone: +33 (0)1 / 55 68 55 68
MITSUBISHI ELECTRIC EUROPE B.V.
GERMANY
Gothaer Straße 8
D-40880 Ratingen
Phone: +49 (0)2102 / 486-0
MITSUBISHI ELECTRIC EUROPE B.V.
IRELAND
Westgate Business Park, Ballymount
IRL-Dublin 24
Phone: +353 (0)1 4198800
MITSUBISHI ELECTRIC EUROPE B.V.
ITALY
Viale Colleoni 7
I-20041 Agrate Brianza (MI)
Phone: +39 039 / 60 53 1
MITSUBISHI ELECTRIC EUROPE B.V.
SPAIN
Carretera de Rubí 76-80
E-08190 Sant Cugat del Vallés (Barcelona)
Phone: 902 131121 // +34 935653131
MITSUBISHI ELECTRIC EUROPE B.V.
UK
Travellers Lane
UK-Hatfield, Herts. AL10 8XB
Phone: +44 (0)1707 / 27 61 00
GEVA
AUSTRIA
Wiener Straße 89
AT-2500 Baden
Phone: +43 (0)2252 / 85 55 20
TEHNIKON
BELARUS
Oktyabrskaya 16/5, Off. 703-711
BY-220030 Minsk
Phone: +375 (0)17 / 210 46 26
ESCO D & A
BELGIUM
Culliganlaan 3
BE-1831 Diegem
Phone: +32 (0)2 / 717 64 30
Koning & Hartman b.v. BELGIUM
Woluwelaan 31
BE-1800 Vilvoorde
Phone: +32 (0)2 / 257 02 40
INEA BH d.o.o. BOSNIA AND HERZEG.
Aleja Lipa 56
BA-71000 Sarajevo
Phone: +387 (0)33 / 921 164
AKHNATON
BULGARIA
4 Andrej Ljapchev Blvd. Pb 21
BG-1756 Sofia
Phone: +359 (0)2 / 817 6004
INEA CR d.o.o.
CROATIA
Losinjska 4 a
HR-10000 Zagreb
Phone: +385 (0)1 / 36 940 - 01/ -02/ -03
MITSUBISHI
ELECTRIC
FACTORY AUTOMATION
AutoCont C.S. s.r.o. CZECH REPUBLIC
Technologická 374/6
CZ-708 00 Ostrava-Pustkovec
Phone: +420 595 691 150
B:TECH A.S.
CZECH REPUBLIC
U Borové 69
CZ-58001 Havlíčkův Brod
Phone: +420 (0)569 777 777
Beijer Electronics A/S
DENMARK
Lykkegårdsvej 17, 1.
DK-4000 Roskilde
Phone: +45 (0)46/ 75 76 66
BeijerElectronicsEestiOÜ
ESTONIA
Pärnu mnt.160i
EE-11317 Tallinn
Phone: +372 (0)6 / 51 81 40
Beijer Electronics OY
FINLAND
Jaakonkatu 2
FIN-01620 Vantaa
Phone: +358 (0)207 / 463 500
UTECO A.B.E.E.
GREECE
5, Mavrogenous Str.
GR-18542 Piraeus
Phone: +30 211 / 1206 900
MELTRADE Ltd.
HUNGARY
Fertő utca 14.
HU-1107 Budapest
Phone: +36 (0)1 / 431-9726
KAZPROMAUTOM.Ltd. KAZAKHSTAN
Mustafina Str. 7/2
KAZ-470046 Karaganda
Phone: +7 7212 / 50 11 50
Beijer Electronics SIA
LATVIA
Vestienas iela 2
LV-1035 Riga
Phone: +371 (0)784 / 2280
Beijer Electronics UAB
LITHUANIA
Savanoriu Pr. 187
LT-02300 Vilnius
Phone: +370 (0)5 / 232 3101
ALFATRADE Ltd.
MALTA
99, Paola Hill
Malta- Paola PLA 1702
Phone: +356 (0)21 / 697 816
INTEHSIS srl
MOLDOVA
bld. Traian 23/1
MD-2060 Kishinev
Phone: +373 (0)22 / 66 4242
HIFLEXAUTOM.B.V. NETHERLANDS
Wolweverstraat 22
NL-2984 CD Ridderkerk
Phone: +31 (0)180 – 46 60 04
Koning&Hartmanb.v. NETHERLANDS
Haarlerbergweg 21-23
NL-1101 CH Amsterdam
Phone: +31 (0)20 / 587 76 00
Beijer Electronics AS
NORWAY
Postboks 487
NO-3002 Drammen
Phone: +47 (0)32 / 24 30 00
MPL Technology Sp. z o.o. POLAND
Ul. Krakowska 50
PL-32-083 Balice
Phone: +48 (0)12 / 630 47 00
Sirius Trading & Services ROMANIA
Aleea Lacul Morii Nr. 3
RO-060841 Bucuresti, Sector 6
Phone: +40 (0)21 / 430 40 06
CraftCon.&Engineeringd.o.o. SERBIA
BulevarSvetogCaraKonstantina80-86
SER-18106 Nis
Phone:+381(0)18/292-24-4/5
INEA SR d.o.o.
SERBIA
Izletnicka 10
SER-113000 Smederevo
Phone: +381 (0)26 / 617 163
AutoCont Control s.r.o. SLOVAKIA
Radlinského 47
SK-02601 Dolny Kubin
Phone: +421 (0)43 / 5868210
CS MTrade Slovensko, s.r.o. SLOVAKIA
Vajanskeho 58
SK-92101 Piestany
Phone: +421 (0)33 / 7742 760
INEA d.o.o.
SLOVENIA
Stegne 11
SI-1000 Ljubljana
Phone: +386 (0)1 / 513 8100
Beijer Electronics AB
SWEDEN
Box 426
SE-20124 Malmö
Phone: +46 (0)40 / 35 86 00
Econotec AG
SWITZERLAND
Hinterdorfstr. 12
CH-8309 Nürensdorf
Phone: +41 (0)44 / 838 48 11
TURKEY
GTS
Bayraktar Bulvari Nutuk Sok. No:5
TR-34775 Yukari ISTANBUL
Phone: +90 (0)216 526 39 90
CSC Automation Ltd.
UKRAINE
4-B, M. Raskovoyi St.
UA-02660 Kiev
Phone: +380 (0)44 / 494 33 55
ILAN & GAVISH Ltd.
ISRAEL
24 Shenkar St., Kiryat Arie
IL-49001 Petah-Tiqva
Phone: +972 (0)3 / 922 18 24
CEG INTERNATIONAL
LEBANON
Cebaco Center/Block A Autostrade DORA
Lebanon - Beirut
Phone: +961 (0)1 / 240 430
CBI Ltd.
SOUTH AFRICA
Private Bag 2016
ZA-1600 Isando
Phone: + 27 (0)11 / 928 2000
Mitsubishi Electric Europe B.V. /// FA - European Business Group /// Gothaer Straße 8 /// D-40880 Ratingen /// Germany
Tel.: +49(0)2102-4860 /// Fax: +49(0)2102-4861120 /// [email protected] /// www.mitsubishi-automation.com
Specifications subject to change /// Art. no. 207075-C /// 10.2009
All trademarks and copyrights acknowledged.
System and Process Visualisation /// Touch Screen and Key Operation ///
Powerful Maintenance Tools /// PLC Program Display /// Direct MES
Integration /// HMIs /// GOTs /// IPCs /// SCADA /// Software ///
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement