Catalogue Sheet: Designer CX4000 Series

Catalogue Sheet: Designer CX4000 Series
Type:
Project/Location:
Contractor:
Prepared By:
Date:
Model No.:
Made in Canada
TYPICAL SPECIFICATIONS
• Thin profile, 2-piece extruded
aluminum housing
• Pre-specified mounting
• Universal, field-selectable chevrons
(knockout)
• Energy efficient – consumes less than
3.5W in AC or DC mode
• Long life ALINGAP technology
energy-efficient LED light source
• CSA certified, meets or exceeds CSA
22.2, No. 141 and C860 requirements
• Normal AC and emergency DC
operation – 120, 277 or 347V AC input;
6 to 24V DC input
• Available in single or double face
• Indirect refractive technology provides
bright, even illumination
WIRE GUARDS
460.0079-RL
wall mount
460.0027-RL
end mount
460.0028-RL
ceiling mount
DIMENSIONS
Dimensions are approximate and subject to change.
4-7/8” [12.5 cm]
9-5/8” [24.3 cm]
FEATURES
8-7/8” [22.5 cm]
Extruded Aluminium Sign
5-5/8” [14.2 cm]
DESIGNER
CX4000 SERIES
Supply and install the Ready-Lite® CX4000 Series LED Exit Sign. The equipment shall operate with universal
AC input voltage of 120/277/347VAC at less than 1.5W and universal two-wire DC input voltage from 6VDC
to 24VDC at less than 1.5W for single and double face signs. The Exit Sign shall consist of a two-piece white
extruded aluminum combined body/faceplate with a maximum depth of 1-1/4”. The exit shall also include
extruded aluminum end caps with white gaskets in order to provide protection to the internal components
and eliminate any possible light leaks. The exit fixture shall be either single or double-faced as shown on the
drawings. The faceplate shall be of a stencil design and will incorporate 6” high letters with a 3/4” stroke.
The canopy shall fasten to the exit body for ease of installation in either ceiling or end mount. The fixture
shall contain a light source, which shall be LED with a long life and shall consist of separate AC and DC LED
sources in the case of AC/DC-remote equipment. Red LED technology shall be ALINGAP.
The Exit Sign in a Self-powered configuration shall be equipped with a Nickel-Cadmium battery and shall stay
illuminated during emergency operation for at least two hours upon AC failure.
The Exit Sign shall be CSA-C860 approved and meets CSA 22.2 No. 141.
The equipment shall be Ready-Lite®Model:
.
1-3/8” [3.4 cm]
12-3/8” [31.4 cm]
13” [33.2 cm]
POWER CONSUMPTION
MODEL
AC SPECS
DC SPECS
AC/DC standard
120/277/347VAC
less than 1.5W
6 to 48VDC
less than 1.5W
AC/ special DC
120/277/347VAC
less than 1.5W
36 or 48 or 120VDC
less than 3W
120VAC/DC two wires
120VAC
less than 3W
120VDC
less than 3W
self-powered
120/347VAC
less than 3.5W
nickel-cadmium battery
min. 2 hours
ORDERING INFORMATION
SERIES
CX4= LED exit
FACES/MOUNTING
000= single face, wall mount
100= single face, ceiling mount
100E= single face, end mount
200= double face, ceiling mount
200E= double face, end mount
COLOUR
WH= polar white
BK= black
TA= textured aluminum
BA= brushed aluminum
VOLTAGE
OPTIONS
-UL= 120/277/347VAC, 6 to 24VDC
-LU36= 120/277/347VAC-36VDC, 4 wires
-LU48= 120/277/347VAC-48VDC, 4 wires
-LU120= 120/277/347VAC, 120VDC, 4 wires
-L0024= 240VAC, no DC*
-ISP= self-powered, 120/347VAC
-ISP2= self-powered, 120/277VAC
-L120-2W= 120VAC-120VDC -2 wires
TP= tamper-proof screws*
*Consult your sales representative for availability and
other DC voltages.
*990.0119-RL= T
amper-proof bit
(sold separately)
E X A M P L E : C X 4 0 0 0 W H - U LT P
28
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement