RL78 Family Data Flash Library Type04 Ver.1.05 for the CC

RL78 Family Data Flash Library Type04 Ver.1.05 for the CC
Release Note
RL78 Family
Data Flash Library Type04 Ver.1.05 for the CC-RL compiler
R20UT3471EJ0100
Rev.1.00
Jun 15, 2015
Release Note
Thank you for using the RL78 Family Data Flash Library Type04 Ver.1.05 for the CC-RL compiler.
This document contains notes and points for caution on using the Data Flash Library Type04 Ver.1.05
for the CC-RL compiler. Please read this document before use.
Contents
1.
Target Product ................................................................................................................ 2
2.
User’s Manual ................................................................................................................. 2
3.
Revisions ........................................................................................................................ 2
4.
Supported Tools ............................................................................................................. 3
5.
Installation ...................................................................................................................... 4
5.1
Installation ................................................................................................................................... 4
5.2
Uninstallation............................................................................................................................... 4
5.3
File Configuration ....................................................................................................................... 5
6.
6.1
7.
How to Debug a Program ............................................................................................... 6
Notes on Debugging ................................................................................................................... 6
How to Allocate Sections ............................................................................................... 6
R20UT3471EJ0100 Rev.1.00
Jun 15, 2015
Page 1 of 6
RL78 Family
Data Flash Library Type04 Ver.1.05 for the CC-RL compiler
Release Note
1. Target Product
The target product of this release note is as follows:
Product Name
RL78 Family
Ver.
ZIP File Name
Zip Ver.
Ver.1.05
JP_R_FDL_RL78_T04_V1.05_CCRL_A_E
V1.05A
Data Flash Library Type04
for the CC-RL compiler
2. User’s Manual
The user’s manual and “difference document” listed below are available for this version. Please read both
documents before using this product.
Title
RL78 Family Data Flash Library Type04
User’s Manual
Document Number
R01US0049EJ0105
RL78 Family Data Flash Library Type04
Differences between the CA78K0R compiler version and
R20UT3473EJ0100
the CC-RL compiler version
3. Revisions
There is no correction item.
R20UT3471EJ0100 Rev.1.00
Jun 15, 2015
Page 2 of 6
RL78 Family
Data Flash Library Type04 Ver.1.05 for the CC-RL compiler
Release Note
4. Supported Tools
Use the following tool version when using the Data Flash Library Type04 Ver.1.05 for the CC-RL compiler.
Tool Name
Integrated development environment CS+
R20UT3471EJ0100 Rev.1.00
Jun 15, 2015
Version
V3.01.00 or later
Page 3 of 6
RL78 Family
Data Flash Library Type04 Ver.1.05 for the CC-RL compiler
Release Note
5. Installation
This chapter describes how to install and uninstall the Data Flash Library Type04 Ver1.05.
5.1
Installation
Install the Data Flash Library Type04 by using the following procedure:
(1) Start Windows.
(2) Decompress the folder that contains the Data Flash Library Type04 files and place the extracted
folder at any location chosen by the user.
5.2
Uninstallation
Uninstall the Data Flash Library Type04 by using the following procedure:
(1) Start Windows.
(2) Delete the folder that contains the Data Flash Library Type04 files and was placed at the location
chosen by the user.
R20UT3471EJ0100 Rev.1.00
Jun 15, 2015
Page 4 of 6
RL78 Family
Data Flash Library Type04 Ver.1.05 for the CC-RL compiler
5.3
Release Note
File Configuration
The file configuration after decompressing the folder that contains the Data Flash Library Type04 for the
CC-RL compiler files is shown below.
.
Installation folder
FDLRL78 Type04
Vx.xx
doc
r01us0049ejxxxx_rl78.pdf
: User’s Manual
r20ut3473ejxxxx_rl78.pdf
:Difference document
r20ut3471ejxxxx_rl78.pdf
: Release Note (this document)
TERMS AND CONDITIONS FOR USING THE SOFTWARE.pdf : Software usage conditions
librl78
pfdl.lib
: Data flash library Type04
incrl78
pfdl.h
: Include file for C
pfdl.inc
: Include file for assembler
pfdl_types.h
: Include file that specifies definitions for C
Notes1: Since “x” in this table means a version number or revision number, these numbers are omitted.
R20UT3471EJ0100 Rev.1.00
Jun 15, 2015
Page 5 of 6
RL78 Family
Data Flash Library Type04 Ver.1.05 for the CC-RL compiler
Release Note
6. How to Debug a Program
For details on how to perform debugging by using IECUBE or the on-chip debugging emulator E1 or E20,
see the following document:
Title
CS+ Integrated Development Environment User's Manual: RL78 Debug Tool Note1
Note1: You can download this document from the "CS+ Integrated Development Environment" of the
Renesas Electronics website.
6.1
Notes on Debugging
(1)The Data Flash Library Type04 cannot be debugged by a simulator. To perform debugging, either
use the on-chip debugging function of the RL78 microcontroller or prepare the IECUBE.
7. How to Allocate Sections
The CC-RL compiler has a -start option that is used to allocate sections to desired locations.
-start = [Section name]/Address
Note that the sizes of the sections are not specifiable.
Note2
The segment names for flash-library functions defined in the user’s manual for the Data Flash Library
Type04 for the CA78K0R compiler are also used as section names by the Data Flash Library Type04 for
the CC-RL compiler. Use the -start option to specify all sections for which settings are required by Data
Flash Library Type04.
While the CA78K0R compiler reserves the self-RAM as an area not for use by the user program, the
CC-RL compiler does not require designation of the self-RAM because there is no need to make settings
for addresses in unused areas.
Note2: For details on the methods of defining and allocating all data, refer to the user's manual for CS+.
Reference to the map file (*.map) generated in building is required to confirm the state of
allocation.
R20UT3471EJ0100 Rev.1.00
Jun 15, 2015
Page 6 of 6
Notice
1.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for
the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the
use of these circuits, software, or information.
2.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics
3.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or
assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein.
technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or
others.
4.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Renesas Electronics assumes no responsibility for any losses incurred by you or
5.
Renesas Electronics products are classified according to the following two quality grades: "Standard" and "High Quality". The recommended applications for each Renesas Electronics product depends on
third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product.
the product's quality grade, as indicated below.
"Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic
equipment; and industrial robots etc.
"High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc.
Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical
implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it
in a particular application. You may not use any Renesas Electronics product for any application for which it is not intended. Renesas Electronics shall not be in any way liable for any damages or losses
incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by Renesas Electronics.
6.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage
range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the
use of Renesas Electronics products beyond such specified ranges.
7.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and
malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the
possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to
redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult,
please evaluate the safety of the final products or systems manufactured by you.
8.
Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics
products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes
no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations.
9.
Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or
regulations. You should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the
development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and
regulations and follow the procedures required by such laws and regulations.
10. It is the responsibility of the buyer or distributor of Renesas Electronics products, who distributes, disposes of, or otherwise places the product with a third party, to notify such third party in advance of the
contents and conditions set forth in this document, Renesas Electronics assumes no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics
products.
11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries.
(Note 1)
"Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.
(Note 2)
"Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics.
http://www.renesas.com
SALES OFFICES
Refer to "http://www.renesas.com/" for the latest and detailed information.
Renesas Electronics America Inc.
2801 Scott Boulevard Santa Clara, CA 95050-2549, U.S.A.
Tel: +1-408-588-6000, Fax: +1-408-588-6130
Renesas Electronics Canada Limited
9251 Yonge Street, Suite 8309 Richmond Hill, Ontario Canada L4C 9T3
Tel: +1-905-237-2004
Renesas Electronics Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K
Tel: +44-1628-585-100, Fax: +44-1628-585-900
Renesas Electronics Europe GmbH
Arcadiastrasse 10, 40472 Düsseldorf, Germany
Tel: +49-211-6503-0, Fax: +49-211-6503-1327
Renesas Electronics (China) Co., Ltd.
Room 1709, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100191, P.R.China
Tel: +86-10-8235-1155, Fax: +86-10-8235-7679
Renesas Electronics (Shanghai) Co., Ltd.
Unit 301, Tower A, Central Towers, 555 Langao Road, Putuo District, Shanghai, P. R. China 200333
Tel: +86-21-2226-0888, Fax: +86-21-2226-0999
Renesas Electronics Hong Kong Limited
Unit 1601-1611, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong
Tel: +852-2265-6688, Fax: +852 2886-9022
Renesas Electronics Taiwan Co., Ltd.
13F, No. 363, Fu Shing North Road, Taipei 10543, Taiwan
Tel: +886-2-8175-9600, Fax: +886 2-8175-9670
Renesas Electronics Singapore Pte. Ltd.
80 Bendemeer Road, Unit #06-02 Hyflux Innovation Centre, Singapore 339949
Tel: +65-6213-0200, Fax: +65-6213-0300
Renesas Electronics Malaysia Sdn.Bhd.
Unit 1207, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: +60-3-7955-9390, Fax: +60-3-7955-9510
Renesas Electronics India Pvt. Ltd.
No.777C, 100 Feet Road, HALII Stage, Indiranagar, Bangalore, India
Tel: +91-80-67208700, Fax: +91-80-67208777
Renesas Electronics Korea Co., Ltd.
12F., 234 Teheran-ro, Gangnam-Gu, Seoul, 135-080, Korea
Tel: +82-2-558-3737, Fax: +82-2-558-5141
© 2015 Renesas Electronics Corporation. All rights reserved.
Colophon 5.0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement