ZX2 Brochure
NEW
SMART Sensor Series
Laser Displacement Sensor CMOS Type
Model ZX2 Series
Stable, Easy & Affordable
Black coating
White coating
Rough machined
metal surface
Metallic luster
One Solution for Any Application
Height/Length
Level detection
Thin connector assembly
Shape validation for molded parts
Positioning
Double feed
Robot hand positioning
Warpage
Tray warpage measurement
Thickness
PCB double feed detection
Wafer thickness measurement
New
Laser Displacement Sensor CMOS Type
ZX2 Series
Realize stable measurements
Resolution 1.5µm
*1
Reliable measurement of moving objects
Measurement cycle
30µs
Realize stable measurements at 10µm
*2
*3
Linearity 0.05% F.S.
Unaffected by environmental changes
Temperature characteristic*4
0.02% F.S./°C*5
*1 When employing Models ZX2-LD50/LD50L (50mm type)
*2 Linearity : Maximum error produced when measuring within measurement range
*3 Linearity ±0.05% F.S. indicates the maximum error is 10µm in the case of using Model
ZX2-LD50L with a 40-50mm measurement range.
*4 Temperature characteristic : Error produced when the ambient temperature varies by 1°C
*5 Linearity ±0.02% F.S./°C indicates the maximum error is 4µm when the ambient
temperature varies by 1°C in the case of using Models ZX2-LD50/LD50L with a
measurement range ±10mm.
2
Stable Measurement and Easy to Use
Stability
Stable measurements in case of color/material
and moving objects
Dynamic range a million times
Step-less adjustment of laser power
PAT.P
Linearity (%FS)
Linearity (%FS)
For high reflectance,
For low reflectance,
CMOS Image Sensor
brightly colored workpiece
darkly colored workpiece
Realizes stable
Emitter element
measurements for any color
Receiver element
Use a low
Use a high
or surface condition including
power laser
power laser
CMOS
beam!
beam!
Image
metals, substrates, elastomers
Sensor
and transparent materials
through the employment of
Omron's own HSDR-CMOS
(High Speed and Dynamic
Stable measurements on objects with changing color/material
Range) image sensor and
Linearity characteristic of
Linearity characteristic of
a step-less laser power
existing product according to material
the ZX2 according to material
1
1
adjustment algorithm. A line
0.8
0.8
0.6
0.6
beam is used in addition to an
0.4
0.4
0.2
0.2
emitter beam, ideally
0
0
White ceramic
-0.2
-0.2
configured with a Omron
SUS304, mirror finishing
-0.4
-0.4
SUS304, hairline (orthogonal)
-0.6
-0.6
sensor lens. Stable
SUS304, hairline (parallel)
-0.6
-0.6
Black rubber
-1
-1
measurements are thereby
2
4
6
8 10
2
4
6
8 10
-10 -8 -6 -4 -2 0
-10 -8 -6 -4 -2 0
Distance (mm)
Distance (mm)
realized, in moving
Stable measurements on moving objects
applications.
Limit of resolution of
existing product when workpiece is moving
Max error:
approx. 400µm
300
200
100
0
-100
-200
-300
-400
Rest state
Easy
40
Measurement error (µm)
Measurement error (µm)
400
Limit of resolution of
the ZX2 when workpiece is moving
30
20
Max error:
approx. 7µm
10
0
-10
-20
-30
Workpiece:SUS304,
hairline (parallel)
-40
Moving condition
Rest state
workpiece
Moving condition
workpiece
Easy and User-friendly Configuration
PAT.P
Smart tuning
The ideal configuration for stable measurements is
realized by a single button through the new feature
“smart tuning”, and no longer depends on the skill
of the user. A reliable configuration is achieved by
three tuning methods, which can be selected to
match the type of object and surface conditions to
be measured.
Sensor configuration by just a pushing
the SMART button
Three selectable tunings
One type of workpiece
Single smart tuning
Best configuration for stable detection in
case of objects do not change by pushing
the button for one second
Several types of workpiece
Multi-smart tuning
Ideal configuration for stable detection
of changing objects by pushing the
button for three seconds
Surface conditions
of the workpiece are variable
Active smart tuning
Continuous configuration improvement
for the stable detection of all locations by
pushing the button for five seconds
3
Sensor head
Sensor Heads for Various Applications
-select the Range and Type of Beam
ZX2-LD50L
ZX2-LD50
Line beam type
Spot beam type
•Measurement range 50mm±10mm
1.5µm
•Resolution
Line beam ±0.05%F.S.*1
•Linearity
*1
•Beam size
Spot beam
±0.10%F.S.
Line beam
Approx.60µm×2.6mm
Approx.60µm dia.
Spot beam
Spot beam
Precise measurement on micro-scale objects
ZX2-LD100L
ZX2-LD100
Line beam type
Spot beam type
•Measurement range 100mm±35mm
5µm
•Resolution
Line beam ±0.05%F.S.*2
•Linearity
*2
•Beam size
Spot beam
±0.10%F.S.
Line beam
Approx.110µm×2.7mm
Approx.110µm dia.
Spot beam
Line beam
Stable measurement on rough-surfaced objects
*1 Using 40 to 50mm
*2 Using 65 to 100mm
4
Support for Various
Environments/Space-Saving
The Smart Sensor Head
Reliable measurements in harsh environments
IP67, robot cable
& temperature characteristic 0.02% F.S./°C
IP67 protection class enables to use the sensor in harsh
environments. A robot cable is used as standard between the head
and amplifier, that the unit can be used reliably on moving parts. In
addition, as 3D UV bond is used to fix the optical components rather
than screws, stress can be controlled and a temperature
characteristic 0.02% F.S./°C* is realized.
* If the room temperature varies 1°C, the measured value varies 0.02% F.S.
(corresponding to 4µm for the Model ZX2-LD50)
Compact sensor for easy mounting
World smallest*
The world’s smallest CMOS laser displacement sensor
head is realized in a resin case. Enables to mount the
sensor in smallest spaces and to minimize
measurement errors arising from temperature
fluctuations.
35.5mm
Cable can be
fed through
from the back
10µm precision measurements
22.6mm
47.5mm
Linearity to meet the application
Model ZX2-LD50L
Measurements to an even higher
accuracy are realized for
applications that do not require
the entire measurement range. If
the range of the field is less than
the length of the measurement
center, linearity accuracy improves
by 50% compared with that for
the full range.*
* Model ZX2-LD
L
50
40
50
Linearity ±0.05%F.S.
60
40
50
Linearity ±0.1%F.S.
Example of an application
that does not require the entire measurement range
Example of an application
that requires the entire measurement range
Low-profile connector assembly
height measurement
Robot hand registration
Visualization to prevent from stopping the production-line
Laser life display function
The end of the laser diode lifespan is automatically
detected and displayed so maintenance can be
performed systematically. On the main digital display
of the amplifier, this is indicated by an LED on the
back of the head. Accordingly, in case of amplifier is
within the control panel, the lifetime can be confirmed
by the head and the indications are not missed.
LED gives
a flashing notification
Deterioration
over time
5
Amplifier unit + Calculating unit
Ease of Use by “LED Display” and “Calculating Unit”
11-segment LED display for intuitive configuration
Determination output indicators
High (orange)/Pass (green)/Low (orange),
two color display
Intuitive operation through
cross buttons
11 Segment LED Display
Easy calculations of measurements
6
A thorough pursuit
of user-friendliness
The Smart Amplifier Unit
No need for a manual
11 Segment LED Display
An 11 segment LED display is integrated in the
compact housing. Alphanumeric characters
can be read with ease and there is no need to
refer to a manual.
Comparison of the existing 7 segment LED display
and the 11 segment LED display
The 7 segment display
on existing models
The 11 segment display
on model ZX2
30mm
30mm
38mm
31mm
64mm
72mm
The compact housing stays just as it is
Perform two calculations with ease
Thickness + subtraction mode
The calculated results of two sensors are displayed on the amplifier by just connecting the
calculating unit between the two amplifiers. The calculation function can be chosen from the two
modes of thickness and subtraction. It is also possible to prevent mutual interference by coupling
via the calculating units.
Thickness mode
Subtraction mode
Sensor 1
A
Sensor 1 0 criterion
Sensor 2 0 criterion
S
K T
A
B
Sensor 2
B
Thickness
T=K+(A+B)
Level difference
S=B- A
Easy change of setup
Equipped with 4 banks
The amplifier unit is equipped
with four bank functions.
Easy change of setup
between four modes is
supported by just switching
between the bank functions.
Existing models
ZX2
B
B ANK 3
B ANK 2
BANAKNK 1
0
Amplifier unit
+
Bank unit
Built into the unit
7
One Sensor for Any Measurement Application
Height/
Length
Point
Stable measurements can be performed by the
HSDR-CMOS image sensor and Omron’s proprietary
algorithm, even for measurements on moving IC
packages.
Warpage
Point
8
Tray flatness measurement
prior to chip firing
Even if there is temperature variation due to the
ambient temperature, a die-cast is used for the optical
base and so there is almost no fluctuation in
measured value.
Double feed
Point
Height measurements prior
to IC package sealing
PCB double feed detection
Even if the color of the substrate changes, application
of the HSDR-CMOS image sensor and Omron’ s
proprietary algorithm results in almost no fluctuation in
measured value.
Level
detection
Point
Calculation of the measured values can be carried out
and the difference in level can be easily measured by just
connecting the calculating unit between two amplifiers.
Even if the surface conditions of a molded part varies,
application of a line beam and HSDR-CMOS image
sensor results in almost no fluctuation in measured value.
Positioning
Point
Robot hand Positioning
Stable measurements can be performed by the
HSDR-CMOS image sensor and Omron’ s proprietary
algorithm even for robot hand registration.
Thickness
Point
Shape validation
for molded parts
Wafer thickness
measurement
Calculation of the measured values can be carried out
and the thickness can be easily measured by just
connecting the calculating unit between two amplifiers.
Ordering Information
Units
Sensor Heads
Appearance
Beam shape
Diffuse
reflection
type
Sensing distance
Line beam
Resolution
50±10mm
40
Spot beam
Model
ZX2-LD50L
1.5µm
60
Line beam
100±35mm
Spot beam
65
ZX2-LD50
ZX2-LD100L
5µm
135
ZX2-LD100
Amplifier Units
Appearance
Power supply
Output type
Model
NPN
ZX2-LDA11
PNP
ZX2-LDA41
DC
Accessories (sold separately)
Calculating Unit
Appearance
These are not included with the Sensor Head or Amplifier Unit. Please order as necessary.
Sensor Head Extension Cables
Model
Cable Length
Model
1m
ZX2-XC1R
4m
ZX2-XC4R
9m
ZX2-XC9R
ZX2-CAL
* Extension cables cannot be coupled and used together.
Specifications
Sensor Heads
Item
Model
ZX2-LD50L
ZX2-LD50
ZX2-LD100L
ZX2-LD100
Optical system
Diffuse reflective
Light source
(wave length)
Visible-light semiconductor laser with a wavelength of 660 nm and an output of 1mW max.
EN class 2,FDA class II*5
Measurement center point
50mm
Measurement range
±10mm
Beam shape
Line
Spot
Line
Spot
Beam size *1
Approx. 60µm×2.6mm
Approx. 60µm dia.
Approx.110µm×2.7mm
Approx.110µm dia.
Resolution *2
1.5µm
Linearity *3
±0.05%F.S. (40 to 50mm)
±0.1%F.S. (entire range)
±0.1%F.S. (40 to 50mm)
±0.15%F.S. (entire range)
±0.05%F.S. (65 to 100mm) ±0.1%F.S. (65 to 100mm)
±0.1%F.S. (entire range)
±0.15%F.S. (entire range)
Temperature characteristic *4
0.02%F.S./°C
Ambient illumination
Incandescent lamp: 10,000lx max. (on light receiving side)
Ambient temperature
Operating: 0 to +50°C, Storage: -15 to +70°C (with no icing or condensation)
Ambient humidity
Operating and storage: 35% to 85% (with no condensation)
Dielectric strength
1,000 VAC, 50/60 Hz for 1 min.
100mm
±35mm
5µm
Vibration resistance (destruction) 10 to 150 Hz, 0.7-mm double amplitude, 80 min. each in X,Y,and Z directions
Shock resistance (destruction) 300 m/s2 3 times each in six directions (up/down,left/right,forward/backward)
Degree of protection
IEC60529, IP67
Connection method
Connector connection (standard cable length: 500 mm)
Weight (packed state)
Approx.160g (unit only: Approx.75g)
Materials
Case and cover: PBT (polybutylene terephtahalate), Optical window: Glass, Cable: PVC
Accessories
Instruction sheet, Ferrite core, Laser warning label (English)
Note) False detection outside the measurement range can occur in the case of an object with high reflectance.
*1. Beam size: Defined as 1/e2 (13.5%) of the central intensity at the smallest value of diameter for the measurement range (typical value)
False detections can occur in the case there is light leakage outside the defined region and the surroundings of the target object have a high reflectance in
comparison to the target object.
*2. Resolution: indicates the degree of fluctuation (±3σ) of analog output when connected to the ZX2-LDA.
(indicates the measured value for the case the response time of the ZX2-LDA is configured to 128ms and Omron’ s standard target object (white ceramics) is made
the center distance.)
Indicates the repetition accuracy for when the workpiece is in a state of rest. Not an indication of distance accuracy.
Resolution performance may not be satisfied in a strong electromagnetic field.
*3. Linearity: indicates the error with respect to the ideal straight line of the displacement output in the case of measuring Omron’ s standard target object. Linearity and
measured value may vary depending on target object.
F.S. indicates the full scope of the measurement range. (ZX2-LD50 : 20mm)
*4. Temperature characteristic: Value for the case the space between the sensor head and Omron’ s standard target object is secured by an aluminum jig. (Measured at
the measurement center distance)
*5. Classified as Class 2 by EN60825-1 criteria in accordance with the FDA standard provisions of Laser Notice No.50. Notification to CDRH planned.
9
Amplifier Units
Item
Model
ZX2-LDA11
ZX2-LDA41
Measurement period *1
Min. 30µs
Response time
60µs, 120µs, 240µs, 500µs, 1ms, 2ms, 4ms, 8ms, 12ms, 20ms, 36ms, 66ms, 128ms, 250ms, 500ms
Analog output *2
4 to 20 mA, Max. load resistance: 300Ω, ±5VDC or 1 to 5 VDC, Output impedance: 100Ω
Judgement outputs
(HIGH/PASS/LOW:
3 outputs), error output
NPN open-collector outputs, 30 VDC, 50 mA max.
PNP open-collector outputs, 30 VDC, 50 mA max.
(residual voltage: 1V max. for load current 10mA max., (residual voltage: 1V max. for load current 10mA max.,
2V max. for load current above 10mA)
2V max. for load current above 10mA)
Laser OFF input,
zero reset input,
timing input, reset input,
bank input
ON: Short-circuited with 0-V terminal or 1.2V or less
OFF: Open (leakage current: 0.1 mA max.)
Functions
Smart tuning, scaling, sample hold, peak hold, bottom hold, peak-to-peak hold, self-peak hold,
self-bottom hold, average hold, zero reset, On-delay timer, OFF-delay timer, keep/clamp switch,
(A-B)calculations *3, thickness calculation *3, mutual interference prevention *3,
laser deterioration detection, bank function(4 banks)
Indications
Judgement indicators: HIGH(orange),PASS(green),LOW(orange),11-segment main display(red),11-segment
sub-display(orange),laser ON(green),zero reset(green),enable(green),menu(green),
HIGH threshold(orange),LOW threshold(orange)
Power supply voltage
10 to 30 VDC, including 10% ripple(p-p)
Power consumption
3,000 mW max. with power supply voltage of 30 VDC and power supply current of 100 mA
(with Sensor connected)
Ambient temperature
Operating: 0 to +50°C, Storage: -15 to +70°C (with no icing or condensation)
Ambient humidity
Operating and storage: 35% to 85% (with no condensation)
Dielectric strength
1,000 VAC, 50/60 Hz for 1 min.
Vibration resistance
(destruction)
10 to 150 Hz, 0.7-mm double amplitude, 80 min. each in X,Y,and Z directions
Shock resistance
(destruction)
300 m/s2 3 times each in six directions (up/down,left/right,forward/backward)
Degree of protection
IEC60529, IP40
Connection method
Prewired (standard cable length: 2 m)
Weight (packed state)
Approx.200g (unit only: Approx.135g)
Materials
Case: PBT(polybutylene terephtahalate), Cover: Polycarbonate, Display: Acrylic resin,
Button: Polyacetal, Cable: PVC
Accessories
Instruction sheet
ON: Supply voltage short-circuited
or supply voltage within -1.2V
OFF: Open (leakage current: 0.1 mA max.)
*1. In the case of Omron’s standard target object (white ceramic)
*2. Configure current output (4 to 20mA) and voltage output (±5V or 1 to 5V) by MENU mode.
*3. Calculating unit (ZX2-CAL) is necessary.
Calculating Unit
Item
10
Model
ZX2-CAL
Applicable Amplifier Units
ZX2-LDA11/ZX2-LDA41
Current consumption
12mA max (supplied from the Smart Sensor Amplifier Unit)
Ambient temperature
Operating: 0 to +50°C, storage: -15 to +70°C (with no icing or condensation)
Ambient humidity
Operating and storage: 35 to 85% RH (with no condensation)
Connection method
Connector
Dielectric strength
1,000VAC, 50/60 Hz for 1min.
Insulation resistance
100MΩ min. (at 500VDC)
Vibration resistance
(destructive)
10 to 150Hz, 0.7-mm double amplitude, 80min. each in X,Y,and Z directions
Shock resistance
(destructive)
300m/s2 3 times each in six directions (up/down, left/right, forward/backward)
Materials
Case: PBT (polybutylene terephthalate), Display: Acrylic resin
Weight (packed state)
Approx. 50g
Accessories
Instruction sheet
Engineering Data (Typical)
Angle Characteristic
ZX2-LD50L
0.6
+ Inclination
0.4
- Inclination
1.0
White ceramic
SUS304,mirror finish
Black rubber
0.8
0.6
+ Inclination
0.4
0.2
- Inclination
0.2
Side-to-side Inclination
Error (%F.S.)
White ceramic
SUS304,mirror finish
Black rubber
0.8
Front-to-back Inclination
Error (%F.S.)
Side-to-side Inclination
Error (%F.S.)
Error (%F.S.)
ZX2-LD50
1.0
1.0
White ceramic
SUS304,mirror finish
Black rubber
0.8
0.6
+ Inclination
0.4
- Inclination
0.2
Front-to-back Inclination
1.0
0.6
+ Inclination
0.4
- Inclination
0.2
0
0
0
0
-0.2
-0.2
-0.2
-0.2
-0.4
-0.4
-0.4
-0.4
-0.6
-0.6
-0.6
-0.6
-0.8
-0.8
-0.8
20
30
40
-1.0
-50 -40 -30 -20 -10
50
Angle of inclination (°)
Side-to-side Inclination
Error (%F.S.)
Error (%F.S.)
ZX2-LD100
10
1.0
White ceramic
SUS304,mirror finish
Black rubber
0.8
+ Inclination
0.6
0.4
0.2
10
20
30
40
Angle of inclination (°)
0.6
White ceramic
SUS304,mirror finish
Black rubber
+ Inclination
0
ZX2-LD100L
Front-to-back Inclination
0.8
-0.8
-1.0
-50 -40 -30 -20 -10
50
1.0
0.4
- Inclination
0
20
30
40
-1.0
-50 -40 -30 -20 -10
50
Angle of inclination (°)
Side-to-side Inclination
1.0
White ceramic
SUS304,mirror finish
Black rubber
0.8
0.6
+ Inclination
0.4
- Inclination
10
Error (%F.S.)
0
Error (%F.S.)
-1.0
-50 -40 -30 -20 -10
- Inclination
0.2
0.2
0.6
+ Inclination
0.4
- Inclination
0
0
-0.2
-0.2
-0.4
-0.4
-0.4
-0.4
-0.6
-0.6
-0.6
-0.6
-0.8
-0.8
-0.8
30
40
-1.0
-50 -40 -30 -20 -10
50
Angle of inclination (°)
0
10
20
30
40
Angle of inclination (°)
40
50
-0.8
-1.0
-50 -40 -30 -20 -10
50
30
0.2
0
20
20
White ceramic
SUS304,mirror finish
Black rubber
0.8
-0.2
10
10
Angle of inclination (°)
Front-to-back Inclination
0
0
0
1.0
-0.2
-1.0
-50 -40 -30 -20 -10
White ceramic
SUS304,mirror finish
Black rubber
0.8
0
10
20
30
40
-1.0
-50 -40 -30 -20 -10
50
Angle of inclination (°)
0
10
20
30
40
50
Angle of inclination (°)
Linearity Characteristic for Different Materials
ZX2-LD50
0.8
0.6
0.4
Error (%F.S.)
0° Inclination
0.8
0.6
0.4
0.6
0.4
0
0
-0.2
-0.2
-0.2
-0.4
-0.4
-0.4
-0.6
-0.6
-0.6
-0.8
-0.8
-4
-2
2
0
4
6
8
10
Distance (mm)
0.8
0.6
Error (%F.S.)
White ceramic
SUS304,mirror finish
Black rubber
0.4
-0.8
-1.0
-10 -8
-6
-4
-2
2
0
4
6
8
10
Distance (mm)
-1.0
-10 -8
-50° Inclination Front-to-back
1.0
0° Inclination
White ceramic
SUS304,mirror finish
Black rubber
0.8
0.6
0.4
-50° Inclination
-0.2
-0.2
-0.2
-0.4
-0.4
-0.4
-0.6
-0.6
-0.6
-0.8
-0.8
2
4
ZX2-LD100
6
8
10
Distance (mm)
0.4
-6
-4
-2
2
0
4
6
8
10
Distance (mm)
0° Inclination
1.0
White ceramic
SUS304,mirror finish
Black rubber
0.8
0.6
0.4
-50° Inclination
-0.2
-0.2
-0.2
-0.4
-0.4
-0.4
-0.6
-0.6
-0.6
-0.8
-0.8
-0.8
-1.0
-35
-1.0
-35
15
25
35
Distance (mm)
0.4
Error (%F.S.)
White ceramic
SUS304,mirror finish
Black rubber
0.6
-15
-5 0
5
15
25
35
Distance (mm)
0° Inclination
1.0
White ceramic
SUS304,mirror finish
Black rubber
0.8
0.6
0.4
-50° Inclination
0.4
-0.2
-0.2
-0.2
-0.4
-0.4
-0.4
-0.6
-0.6
-0.6
-0.8
-0.8
25
35
Distance (mm)
-1.0
-35
-15
-5 0
5
15
25
35
Distance (mm)
White ceramic
SUS304,mirror finish
Black rubber
0.6
0
15
10
+50° Inclination
0
-5 0 5
-25
0.8
0
-15
8
1.0
0.2
-25
6
Distance (mm)
+50° Inclination
-1.0
-35
0.2
-1.0
-35
4
0.2
-50° Inclination Front-to-back
0° Inclination
1.0
0.8
-25
2
0
White ceramic
SUS304,mirror finish
Black rubber
0.4
0
5
-2
0.6
0
-5 0
-4
0.8
0
-15
-6
1.0
0.2
-25
+50° Inclination
-1.0
-10 -8
0.2
ZX2-LD100L
10
+50° Inclination
Error (%F.S.)
0.6
Error (%F.S.)
0.8
8
White ceramic
SUS304,mirror finish
Black rubber
0.2
-50° Inclination Front-to-back
White ceramic
SUS304,mirror finish
Black rubber
6
Distance (mm)
-0.8
-1.0
-10 -8
0° Inclination
1.0
4
0.4
0
0
2
0
0.6
0
-2
-2
0.8
0
-4
-4
1.0
0.2
-6
-6
+50° Inclination
1.0
0.2
-1.0
-10 -8
+50° Inclination
0.2
Error (%F.S.)
-6
White ceramic
SUS304,mirror finish
Black rubber
0.8
0
0° Inclination
Error (%F.S.)
-50° Inclination
1.0
0.2
ZX2-LD50L
Error (%F.S.)
White ceramic
SUS304,mirror finish
Black rubber
0.2
-1.0
-10 -8
Error (%F.S.)
+50° Inclination
1.0
Error (%F.S.)
Error (%F.S.)
White ceramic
SUS304,mirror finish
Black rubber
Error (%F.S.)
-50° Inclination Front-to-back
0° Inclination
1.0
0.2
+50° Inclination
* The x-axis distance indicates the measurement
distance displayed by the amplifier unit. The
measurement distance displayed by the amplifier
unit takes the measurement center distance as 0 and
displays the near-field from the sensor as plus and
the far-field as minus.
-0.8
-25
-15
-5 0 5
15
25
35
Distance (mm)
-1.0
-35
-25
-15
-5 0 5
15
25
35
Distance (mm)
11
Dimensions
(Unit: mm)
Units
Sensor Heads
Amplifier Units
ZX2-LD50/ZX2-LD50L
ZX2-LD100/ZX2-LD100L
ZX2-LDA11/ZX2-LDA41
18
(9.7)
11.7
Reference surface
Emitter axis
28.43
Laser
warning
light
12.6 dia.
29.8
* In the case of ZX2-LD50 (L),
L=50, A=21°
In the case of ZX2-LD100 (L),
L=100, A=11.5°
15.4
10.9
38.4*1
6.1
16.6
9.6
34.2
*1 Maximum height when cover open:56
*2 Minimum length when connected:50
Vinyl insulated round cable,
5.2 dia., 11 conductors
(Conductor cross-section: 0.09mm2/
Insulator diameter: 0.7mm)
Standard length: 2m
50
Sensor Head Extension Cables
ZX2-XC1R
ZX2-XC4R
ZX2-XC9R
Coupling
connectors
12.3 dia.
24.9
19.5
3
Range
indicator
36.8
Vinyl insulated round cable,
4.7 dia., 4 conductors
(Conductor cross-section: 0.086mm2/
Insulator diameter: 0.9mm)
Standard length: 0.5m
Calculating Unit
ZX2-CAL
4.2
15.1
29.8
L*
28.9
8.9 dia.
15.1
20.7
4.8
39.5
Emitter
center
47.5
7
Receiver axis
47.6
Range
indicator
4.8
6
72
(when cover open 84.6)
16.9
Reference
surface
27.5
6.2*2
30
20.9
35.5
4
A*
16.7
35.3
10.5
10.1
Two, 3.2-dia.
(Mounting holes)
4
Emitter
axis
7
22.6
9.7
Reference surface
L*
Coupled indicators
12
57
8
Vinyl insulated round cable, 4.7 dia.
Sensor Head attachment connector
(male, 6 pole)
26
3.4
30
Amplifier Unit attachment connector
(female, 6 pole)
36.7
5
OMRON Corporation
* Length L is as follows. ZX2-XC1R:1m, ZX2-XC4R:4m, ZX2-XC9R:9m
Industrial Automation Company
Tokyo, JAPAN
Authorized Distributor:
Contact : www.ia.omron.com
Regional Headquarters
OMRON EUROPE B.V.
Sensor Business Unit
Carl-Benz-Str. 4, D-71154 Nufringen, Germany
Tel: (49) 7032-811-0/Fax: (49) 7032-811-199
OMRON ELECTRONICS LLC
One Commerce Drive Schaumburg,
IL 60173-5302 U.S.A.
Tel: (1) 847-843-7900/Fax: (1) 847-843-7787
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark,
Singapore 119967
Tel: (65) 6835-3011/Fax: (65) 6835-2711
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200
© OMRON Corporation 2010 All Rights Reserved.
In the interest of product improvement,
specifications are subject to change without notice.
Printed in Japan
Cat. No. E406-E1-01
(1010)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement