Interlogix R1125 Series Installation Instructions
Below you will find brief information for Magnetic Contact R1125 R1125, Magnetic Contact R1125 R1125W. These magnetic contacts are designed to be used with security systems to monitor doors and windows. They are easy to install and have a variety of features, including a standard gap distance of 1/2" and a wide gap distance of 7/8".
advertisement
GE Magnetic Contacts
R1125 Series
3 / 8
" Diameter Stubby Press Fit with Mini-Max
Gap Distance
Regular 1 /
2
"
Wide 7 /
8
"
Color
Quantity
Closed Loop
R1125
R1125W
White
10
100% TESTED
604S
Connectors and Switches
R1125-N
R1125 Series
3 /
8
" Diameter Stubby Press Fit with Mini-Max
Installation Instructions
Switch
1: Drill
3
/
4
" dia. hole 1
1
/
8
" deep for the contact.
2: Connect contact leads to security system loop and test for continuity.
3: Lightly coat the contact RTV mounting compound (GE part number 1905) and insert into respective hole.
Magnet
1: Mount magnet to double-sided tape (included) and affix to window frame.
2: Or, if using stainless steel screw (included), drill
1
/
16
" dia. (using magnet center hole as a guide) and mount using #4 x
1
/
2
" stainless steel screw (included). Use caution if using screw other than the one provided, as it will effect the gap performance.
3: Care should be taken not to over tighten screw to avoid damage to magnet or stripping hole.
Recess/Flush Mount Magnet
1: Drill 7 /
16
" dia. hole (standard gap) or 5 /
8
" dia. hole (wide gap) by approximately 1 /
8
" deep .
2: Coat magnet with RTV silicon adhesive and mount into hole.
NOTE: When surface mounting magnet be sure there is enough clearance to prevent the magnet from becoming damaged when closing the window or door.
Standard Gap
.75"
19.1mm
.13"
3.3mm
.38"
9.5mm
Magnet
Part No. 1830
(included) hole diameter:
.13"
3.3mm
#4 Countersink
.44"
11.1mm
.60"
15.2mm
Wide Gap .75"
19.1mm
.13"
3.3mm
Magnet
Part No. 1835
(included) hole diameter:
.13"
3.3mm
#4 Countersink
.44"
11.1mm
C-UL-US Specifications
Part
Number
R1125
R1125W
Loop
Type
Closed
Closed
Electrical
Configuration
N.O.
N.O.
Gap
Distance
1
/
2
"
7
/
8
"
**
**
European Union Specifications: 48 V AC/DC max, 0.5 Amp
FORM A (R1125, R1125W)
Voltage: 100 V AC/DC max
Current: 0.5 A max
Power: 7.5 W max
WARNING: Each electrical rating is an individual maximum and cannot be exceeded!
C-UL Specifications
GE Interlogix www.GE-Interlogix.com
10341401 rev A
12345 SW Leveton Drive
Tualatin, OR 97062
Phone: 503-692-4052
USA & Canada: 800-547-2556
Technical Service: 800-648-7424
Faxback: 800-483-2495
2266 Second Street North
North St. Paul, MN 55109
Phone: 651-777-2690
USA & Canada: 800-777-5484
Technical Service: 800-777-2624
Made in Taiwan
advertisement
Key Features
- 3/8" Diameter Stubby Press Fit with Mini-Max
- Standard Gap Distance 1/2"
- Wide Gap Distance 7/8"
- Closed Loop
- Easy Installation
- RTV mounting compound included
- Double-sided tape included
- Stainless steel screw included
- C-UL-US Certified
Frequently Answers and Questions
How do I install the Magnetic Contact?
What is the difference between the R1125 and the R1125W?
What is the maximum voltage and current rating for the R1125 and R1125W?
Related manuals
advertisement