IQAir HealthPro Plus New Edition Technical Specifications

Technical Specifications: IQAir® HealthPro® Plus

General Specifications

Power requirements

Energy consumption, 6 fan speeds*

Dimensions

Weight, system incl. filters

Air delivery, incl. filters, 6 fan speeds*

Sound pressure/power level, 6 fan speeds**

Fan motor

Control panel

Air intake

Air outlet

Color of main housing / locking arms

Housing material

Operating temperature / humidity

Electrical safety certification

Warranty

Performance

Total system efficiency

Air delivery (certified)

Leak tested

EN 1822 classification

100-120 V, 50/60 Hz

27, 53, 92, 121, 154, 215 Watt; Standby: <1 Watt

H 28" x W 15" x D 16" (H 71 x W 38 x D 41 cm)

35 lbs. (16 kg)

40, 75, 130, 170, 200, 300 cfm (70, 130, 220, 290, 340, 510 m 3 /h)

L

P

25, 36, 44, 50, 54, 59 dB(A); L

W

35, 46, 54, 60, 64, 69 dB(A) centrifugal, backward curved, with thermal protector, non-stop use approved

4-key touch-pad with 16 character 2-line LCD display dual arches at base of system

320° EvenFlow™ diffuser light gray / white non-offgasing, impact-resistant, UV-stabilized ABS

41° to 104° F (5° to 40°C) / 5% to 95% non-condensing

CSA rated for continuous operation under applicable UL and CSA standards, BSMI

5 years on parts and labor (excluding filters)

≥ 99.97% for particles ≥ 0.3 microns (individually tested), ≥ 99.5% at ≥ 0.003 microns yes (individually tested with all filters installed) yes

HEPA class H13 - MPPS efficiency: ≥ 99.95% @ 0.22 microns at airflow rate ≤ 112 cfm (190 m 3 /h)

HEPA class H12 - MPPS efficiency: ≥ 99.50% @ 0.16 microns at airflow rate ≤ 280 cfm (475 m 3 /h)

NE

Filter Configuration

Pre-filter

Gas & odor filter

Main particle filter

PreMax™ Filter F8 (S)

Purpose: control of coarse and fine particulate matter; protection of subsequent filters

Media: non-woven glass microfiber, mini-pleated for high-capacity, non-offgasing separators

Efficiency: ≥ 55% at ≥ 0.3 microns (EN 779 class F8)

Surface area: 30 sq.ft. (2.8 m 2 )***

Average filter life: approx. 18 months (based on average daily usage of 10h on speed 3)****

V5-Cell™ Filter MG

Purpose: control of a wide range of chemical contaminants and odors

Media: MultiGas™ granulated activated carbon & impregnated activated alumina (AC/4 + IA/4)

Weight: 5 lbs. (2.5 kg)***

Average filter life: approx. 2 years (based on average daily usage of 10h on speed 3)****

HyperHEPA® Filter H12/13 (L)

Purpose: control of fine & ultra-fine particulate matter

Media: non-woven glass microfiber, medical-grade HyperHEPA® filter, non-offgasing separators

Efficiency: ≥ 99.97% at ≥ 0.3 microns (EN 1822 class H12/13)

Surface area: 53 sq. ft. (5.0 m 2 )***

Average filter life: approx. 4 years (based on average daily usage of 10h on speed 3)****

Features

Display languages

Intelligent filter life monitor

Advanced timer

Advanced fan speed selection

Supplied accessories

Optional accessories

4 user-selectable languages: English, French, German, Spanish yes (monitors actual usage of each individual filter), 3 filter life status LEDs yes (allows programming of operating hours and weekdays) yes (allows programming of different fan speeds for 2 different time periods) remote control (incl. battery), power cord with plug, casters, certificate of performance

FlexVac & VM FlexVac mobile & wall-mounted source capture kits, InFlow & OutFlow positive/negative pressure duct kits, PF40 coarse dust pre-filter, VMF wall-mount bracket.

* per fan speed measured at 120V, 60Hz; tolerance: ± 10% (± 6 cfm); ** tolerance: ± 3 dB(A); *** tolerance: ± 10% **** filter life can vary based on actual usage and pollution levels

All technical specifications are subject to change without prior notice.

105.01.00.06 IQ TS HPP NE 120V USA