Konica Minolta bizhub C30P Printers User Guide Manual Pdf

Konica Minolta bizhub C30P Printers User Guide Manual Pdf
bizhub C30P
User’s Guide
A011-9566-00A
Downloaded From ManualsPrinter.com Manuals
Trademarks
KONICA MINOLTA and the KONICA MINOLTA logo are trademarks or registered
trademarks of KONICA MINOLTA HOLDINGS, INC.
PageScope and bizhub are registered trademarks or trademarks of KONICA
MINOLTA BUSINESS TECHNOLOGIES, INC
All other trademarks and registered trademarks are the property of their respective
owners.
Copyright Notice
Copyright © 2006 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., Marunouchi Center
Building, 1-6-1 Marunouchi, Chiyoda-ku, Tokyo, 100-0005, Japan. All Rights Reserved. This
document may not be copied, in whole or part, nor transferred to any other media or language,
without written permission of KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.
Notice
KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. reserves the right to make changes to
this guide and to the equipment described herein without notice. Considerable effort has been
made to ensure that this guide is free of inaccuracies and omissions. However, KONICA
MINOLTA BUSINESS TECHNOLOGIES, INC. makes no warranty of any kind including, but not
limited to, any implied warranties of merchantability and fitness for a particular purpose with
regard to this guide. KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. assumes no
responsibility for, or liability for, errors contained in this guide or for incidental, special, or consequential damages arising out of the furnishing of this guide, or the use of this guide in operating
the equipment, or in connection with the performance of the equipment when so operated.
Downloaded From ManualsPrinter.com Manuals
SOFTWARE LICENSE AGREEMENT
This package contains the following materials provided by Konica Minolta Business Technologies, Inc. (KMBT): software included as part of the printing system, the digitally-encoded
machine-readable outline data encoded in the special format and in the encrypted form (“Font
Programs”), other software which runs on a computer system for use in conjunction with the
Printing Software (“Host Software”), and related explanatory written materials (“Documentation”). The term “Software” shall be used to describe Printing Software, Font Programs and/or
Host Software and also include any upgrades, modified versions, additions, and copies of the
Software.
The Software is being licensed to you under the terms of this Agreement.
KMBT grants to you a non-exclusive sublicense to use the Software and Documentation, provided that you agree to the following:
1. You may use the Printing Software and accompanying Font Programs for imaging to the
licensed output device(s), solely for your own internal business purposes.
2. In addition to the license for Font Programs set forth in Section 1 (“Printing Software”)
above, you may use Roman Font Programs to reproduce weights, styles, and versions of
letters, numerals, characters and symbols (“Typefaces”) on the display or monitor for your
own internal business purposes.
3. You may make one backup copy of the Host Software, provided your backup copy is not
installed or used on any computer. Notwithstanding the above restrictions, you may install
the Host Software on any number of computers solely for use with one or more printing
systems running the Printing Software.
4. You may assign its rights under this Agreement to an assignee of all of Licensee’s right and
interest to such Software and Documentation (“Assignee”) provided you transfer to
Assignee all copies of such Software and Documentation Assignee agrees to be bound by
all of the terms and conditions of this Agreement.
5. You agree not to modify, adapt or translate the Software and Documentation.
6. You agree that you will not attempt to alter, disassemble, decrypt, reverse engineer or
decompile the Software.
7. Title to and ownership of the Software and Documentation and any reproductions thereof
shall remain with KMBT and its Licensor.
8. Trademarks shall be used in accordance with accepted trademark practice, including identification of the trademark owner’s name. Trademarks can only be used to identify printed
output produced by the Software. Such use of any trademark does not give you any rights
of ownership in that trademark.
9. You may not rent, lease, sublicense, lend or transfer versions or copies of the Software that
the Licensee does not use, or Software contained on any unused media, except as part of
the permanent transfer of all Software and Documentation as described above.
10. In no event will KMBT or its licensor be liable to you for any consequential, incidental INDIRECT, PUNITIVE or special damages, including any lost profits or lost saving, even if
KMBT has been advised of the possibility of such damages, or for any claim by any third
party. KMBT or its licensor disclaims all warranties with regard to the software, express or
implied, including, without limitation implied warranties of merchantability, fitness for a particular purpose, title and non-infringement of third party rights. Some states or jurisdictions
do not allow the exclusion or limitation of incidental, consequential or special damages, so
the above limitations may not apply to you.
Downloaded From ManualsPrinter.com Manuals
11. Notice to Government End Users: The Software is a “commercial item,” as that term is
defined at 48 C.F.R.2.101, consisting of “commercial computer software” and “commercial
computer software documentation,” as such terms are used in 48 C.F.R. 12.212. Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4, all U.S. Government End Users acquire the Software with only those rights set forth herein.
12. You agree that you will not export the Software in any form in violation of any applicable
laws and regulations regarding export control of any countries.
About Adobe Color Profile
ADOBE SYSTEMS INCORPORATED
COLOR PROFILE LICENSE AGREEMENT
NOTICE TO USER: PLEASE READ THIS CONTRACT CAREFULLY. BY USING ALL OR ANY
PORTION OF THE SOFTWARE YOU ACCEPT ALL THE TERMS AND CONDITIONS OF
THIS SOFTWARE YOU ACCEPT ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT AGREE WITH THE TERMS OF THIS AGREEMENT, DO NOT USE
THE SOFTWARE.
1. DEFINITIONS In this Agreement, “Adobe” means Adobe Systems Incorporated, a Delaware corporation, located at 345 Park Avenue, San Jose, California 95110. “Software”
means the software and related items with which this Agreement is provided.
2. LICENSE Subject to the terms of this Agreement, Adobe hereby grants you the worldwide,
non-exclusive, nontransferable, royalty-free license to use, reproduce and publicly display
the Software. Adobe also grants you the rights to distribute the Software only (a) as embedded within digital image files and (b) on a standalone basis. No other distribution of the
Software is allowed; including, without limitation, distribution of the Software when incorporated into or bundled with any application software. All individual profiles must be referenced by their ICC Profile description string. You may not modify the Software. Adobe is
under no obligation to provide any support under this Agreement, including upgrades or
future versions of the Software or other items. No title to the intellectual property in the Software is transferred to you under the terms of this Agreement. You do not acquire any rights
to the Software except as expressly set forth in this Agreement.
3. DISTRIBUTION If you choose to distribute the Software, you do so with the understanding
that you agree to defend, indemnify and hold harmless Adobe against any losses, damages or costs arising from any claims, lawsuits or other legal actions arising out of such distribution, including without limitation, your failure to comply with this Section 3. If you
distribute the Software on a standalone basis, you will do so under the terms of this Agreement or your own license agreement which (a) complies with the terms and conditions of
this Agreement; (b) effectively disclaims all warranties and conditions, express or implied,
on behalf of Adobe; (c) effectively excludes all liability for damages on behalf of Adobe; (d)
states that any provisions that differ from this Agreement are offered by you alone and not
Adobe and (e) states that the Software is available from you or Adobe and informs licensees how to obtain it in a reasonable manner on or through a medium customarily used for
software exchange. Any distributed Software will include the Adobe copyright notices as
included in the Software provided to you by Adobe.
Downloaded From ManualsPrinter.com Manuals
4. DISCLAIMER OF WARRANTY Adobe licenses the Software to you on an “AS IS” basis.
Adobe makes no representation as to the adequacy of the Software for any particular purpose or to produce any particular result. Adobe shall not be liable for loss or damage arising out of this Agreement or from the distribution or use of the Software or any other
materials. ADOBE AND ITS SUPPLIERS DO NOT AND CANNOT WARRANT THE PERFORMANCE OR RESULTS YOU MAY OBTAIN BY USING THE SOFTWARE, EXCEPT
FOR ANY WARRANTY, CONDITION, REPRESENTATION OR TERM TO THE EXTENT
TO WHICH THE SAME CANNOT OR MAY NOT BE EXCLUDED OR LIMITED BY LAW
APPLICABLE TO YOU IN YOUR JURISDICTION, ADOBE AND ITS SUPPLIERS MAKE
NO WARRANTIES, CONDITIONS, REPRESENTATIONS OR TERMS, EXPRESS OR
IMPLIED, WHETHER BY STATUTE, COMMON LAW, CUSTOM, USAGE OR OTHERWISE AS TO ANY OTHER MATTERS, INCLUDING BUT NOT LIMITED TO NONINFRINGEMENT OF THIRD PARTY RIGHTS, INTEGRATION, SATISFACTORY QUALITY
OR FITNESS FOR ANY PARTICULAR PURPOSE. YOU MAY HAVE ADDITIONAL
RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION. The provisions of Sections 4, 5 and 6 shall survive the termination of this Agreement, howsoever caused, but this
shall not imply or create any continued right to use the Software after termination of this
Agreement.
5. LIMITATION OF LIABILITY IN NO EVENT WILL ADOBE OR ITS SUPPLIERS BE LIABLE
TO YOU FOR ANY DAMAGES, CLAIMS OR COSTS WHATSOEVER OR ANY CONSEQUENTIAL, INDIRECT, INCIDENTAL DAMAGES, OR ANY LOST PROFITS OR LOST
SAVINGS, EVEN IF AN ADOBE REPRESENTATIVE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSS, DAMAGES, CLAIMS OR COSTS OR FOR ANY CLAIM BY
ANY THIRD PARTY. THE FOREGOING LIMITATIONS AND EXCLUSIONS APPLY TO
THE EXTENT PERMITTED BY APPLICABLE LAW IN YOUR JURISDICTION. ADOBE’S
AGGREGATE LIABILITY AND THAT OF ITS SUPPLIERS UNDER OR IN CONNECTION
WITH THIS AGREEMENT SHALL BE LIMITED TO THE AMOUNT PAID FOR THE SOFTWARE. Nothing contained in this Agreement limits Adobe’s liability to you in the event of
death or personal injury resulting from Adobe’s negligence or for the tort of deceit (fraud).
Adobe is acting on behalf of its suppliers for the purpose of disclaiming, excluding and/or
limiting obligations, warranties and liability as provided in this Agreement, but in no other
respects and for no other purpose.
6. TRADEMARKS Adobe and the Adobe logo are the registered trademarks or trademarks of
Adobe in the United States and other countries. With the exception of referential use, you
will not use such trademarks or any other Adobe trademark or logo without separate prior
written permission granted by Adobe.
7. TERM This Agreement is effective until terminated. Adobe has the right to terminate this
Agreement immediately if you fail to comply with any term hereof. Upon any such termination, you must return to Adobe all full and partial copies of the Software in your possession
or control.
8. GOVERNMENT REGULATIONS If any part of the Software is identified as an export controlled item under the United States Export Administration Act or any other export law,
restriction or regulation (the “Export Laws”), you represent and warrant that you are not a
citizen, or otherwise located within, an embargoed nation (including without limitation Iran,
Iraq, Syria, Sudan, Libya, Cuba, North Korea, and Serbia) and that you are not otherwise
prohibited under the Export Laws from receiving the Software. All rights to use the Software
are granted on condition that such rights are forfeited if you fail to comply with the terms of
this Agreement.
Downloaded From ManualsPrinter.com Manuals
9. GOVERNING LAW This Agreement will be governed by and construed in accordance with
the substantive laws in force in the State of California as such laws are applied to agreements entered into and to be performed entirely within California between California residents. This Agreement will not be governed by the conflict of law rules of any jurisdiction or
the United Nations Convention on Contracts for the International Sale of Goods, the application of which is expressly excluded. All disputes arising out of, under or related to this
Agreement will be brought exclusively in the state Santa Clara County, California, USA.
10. GENERAL You may not assign your rights or obligations granted under this Agreement
without the prior written consent of Adobe. None of the provisions of this Agreement shall
be deemed to have been waived by any act or acquiescence on the part of Adobe, its
agents, or employees, but only by an instrument in writing signed by an authorized signatory of Adobe. When conflicting language exists between this Agreement and any other
agreement included in the Software, the terms of such included agreement shall apply. If
either you or Adobe employs attorneys to enforce any rights arising out of or relating to this
Agreement, the prevailing party shall be entitled to recover reasonable attorneys’ fees. You
acknowledge that you have read this Agreement, understand it, and that it is the complete
and exclusive statement of your agreement with Adobe which supersedes any prior agreement, oral or written, between Adobe and you with respect to the licensing to you of the
Software. No variation of the terms of this Agreement will be enforceable against Adobe
unless Adobe gives its express consent, in writing, signed by an authorized signatory of
Adobe.
ICC Profile for TOYO INK Standard Color on Coated paper
(TOYO Offset Coated 2.1)
This ICC Profile (TOYO Offset Coated 2.1) characterizes Japanese offset press on Coated
paper and is fully compatible with ICC profile format.
About “TOYO INK Standard Color on Coated paper”
This is the standard for color reproduction of sheet-fed offset press on Coated paper made by
TOYO INK MFG.CO., LTD. (“TOYO INK”).
This standard is made from printing test with using TOYO INK’s sheet-fed offset printing inks
and TOYO INK’s own printing conditions.
“TOYO INK Standard Color on Coated paper” is compatible with “JAPAN COLOR”.
Agreement
1. The reproduction of images on a printer or a monitor using this ICC Profile do not completely match the TOYO INK Standard Color on Coated paper.
2. Any and all copyrights of this ICC Profile shall remain in TOYO INK; therefore you shall not
transfer, provide, rent, distribute, disclose, or grant any rights in this ICC Profile to any third
party without the prior written consent of TOYO INK.
3. In no event will TOYO INK its directors, officers, employees or agents be liable to you for
any consequential or incidential, either direct or indirect, damages (including damages for
loss of business profits, business interruption, loss of business information, and the like)
arising out of the use or inability to use this ICC Profile.
4. TOYO INK shall not be responsible for answering any question related to this ICC Profile.
Downloaded From ManualsPrinter.com Manuals
5. All company names and product names used in this document is the trademarks or registered trademarks of their respective holder.
This ICC Profile made by GretagMacbeth ProfileMaker and granted TOYO INK certain license
to distribute by GretagMacbeth AG.
TOYO Offset Coated 2.1 © TOYO INK MFG. CO., LTD. 2004
For EU member states only
This symbol means: Do not dispose of this product
together with your household waste!
Please contact the Local Authority for appropriate disposal instructions. In the case of a new device being
purchased, the used one can also be given to our dealer
for appropriate disposal. Recycling of this product will
help to conserve natural resources and prevent potential
negative consequences for the environment and human
health caused by inappropriate waste handling.
This product complies with RoHS (2002/95/EC) directive.
Downloaded From ManualsPrinter.com Manuals
Downloaded From ManualsPrinter.com Manuals
Contents
1
Introduction ....................................................................................................... 1
Getting Acquainted with Your Printer 2
Space Requirements 2
Printer Parts 4
Front View 4
Rear View 5
Front View with Options 5
2
About the Software ........................................................................................... 7
Printer Driver CD-ROM 8
PostScript Drivers 8
PCL Drivers 8
PPD Files 9
Utilities and Documentation CD-ROM 9
Utilities 9
System Requirements 12
Selecting Driver Options/Defaults (for Windows) 13
Windows XP/Server 2003/2000/NT 4.0 13
Uninstalling the Printer Driver (for Windows) 15
Windows XP/Server 2003/2000/NT 4.0 15
Contents
Downloaded From ManualsPrinter.com Manuals
i
Displaying Printer Driver Settings (for Windows) 16
Windows XP/Server 2003 16
Windows 2000/NT 4.0 16
Using the Postscript and PCL Printer Driver 17
Common Buttons 17
OK 17
Cancel 17
Apply 17
Help 17
Easy Set 17
Paper View 18
Printer View 18
Watermark View 18
Quality View 18
Default 18
Advanced Tab (PostScript Printer Driver Only) 18
Basic Tab 19
Layout Tab 19
Cover Page Tab 20
Overlay Tab 20
Watermark Tab 20
Quality Tab 21
Version Tab 21
Limitations on printer driver functions installed with Point and Print
21
3
Using the Status Monitor (Windows Only) ....................................................23
Working with the Status Monitor 24
Introduction 24
Operating Environment 24
Opening the Status Monitor 24
Using the Status Monitor 24
Recognizing Status Monitor Alerts 25
Recovering from a Status Monitor Alert 25
Closing the Status Monitor 25
4
Printer Control Panel and Configuration Menu ............................................27
About the Control Panel 28
Control Panel Indicators and Keys 28
Message Window 30
Help Screens 31
Configuration Menu Overview 32
Main Menu 32
PROOF/PRINT MENU 34
Printing/Deleting a Stored Job 34
Entering the Password 36
PRINT MENU 37
ii
Contents
Downloaded From ManualsPrinter.com Manuals
PAPER MENU 39
QUALITY MENU 46
MEMORY DIRECT 65
CAMERA DIRECT 68
INTERFACE MENU 72
SYS DEFAULT MENU 75
MAINTENANCE MENU 86
SERVICE MENU 92
5
Camera Direct .................................................................................................. 93
Camera Direct 94
Printing Directly from a Digital Camera 94
6
Memory Direct ................................................................................................. 95
Memory Direct 96
Printing From a Connected USB Memory Device 96
7
Using Media ..................................................................................................... 97
Media Specifications 98
Media Types 99
Plain Paper (Recycled Paper) 99
Thick Stock 101
Envelopes 101
Labels 102
Letterhead 103
Postcards 104
Transparencies 105
Glossy Media 106
What Is the Guaranteed Imageable (Printable) Area? 107
Imageable Area—Envelopes 107
Page Margins 107
Loading Media 108
Tray 1 (Manual Feed Tray) 108
Loading Plain Paper 108
Other Media 110
Loading Envelopes 111
Loading Label Sheets/Postcards/Thick Stock/Glossy Media and
Transparencies 115
Loading Banner Paper 118
Tray 2 121
Loading Plain Paper 121
Tray 3/4 (Optional Lower Feeder Units) 123
Loading Plain Paper 123
Duplexing 126
Output Tray 127
Finishing 128
Contents
Downloaded From ManualsPrinter.com Manuals
iii
Job Separation Printing
Offset Printing 129
Staple printing 129
Media Storage 130
128
8
Replacing Consumables ...............................................................................131
Replacing Consumables 132
About Toner Cartridges 132
Replacing a Toner Cartridge 135
Replacing a Print Unit 139
Replacing the Waste Toner Bottle 145
Replacing the Transfer Roller 148
Replacing the Transfer Roller 148
Replacing the Ozone Filter 151
Replacing the Transfer Belt Unit 152
Replacing the Backup Battery 158
Replacing the Staple 161
9
Maintaining the Printer ..................................................................................165
Maintaining the Printer 166
Cleaning the Printer 168
Exterior 168
Media Rollers 169
Cleaning the Media Feed Rollers (Manual Feed Tray) 169
Cleaning the Media Feed Rollers (Tray 2/3/4) 171
Cleaning the Duplex Option Feed Rollers 172
Cleaning the Media Transfer Rollers for Tray 3 and 4 173
Cleaning the Laser Lens 174
10 Troubleshooting ............................................................................................175
Introduction 176
Printing a Configuration Page 176
Preventing Media Misfeeds 177
Understanding the Media Path 178
Clearing Media Misfeeds 179
Media Misfeed Messages and Clearing Procedures 180
Clearing a Media Misfeed in Tray 2 181
Clearing a Media Misfeed in Tray 3/4 185
Clearing a Media Misfeed from the Duplex Option 187
Clearing a Media Misfeed from the Fuser Unit 188
Clearing a Media Misfeed from Tray 1 (Manual Feed Tray) and Transfer
Roller 191
Relay Unit 193
Staple Finisher (Case 1) 194
Staple Finisher (Case 2) 195
Staple Finisher (Case 3) 196
iv
Downloaded From ManualsPrinter.com Manuals
Contents
Clearing Jammed Staples 197
Solving Problems with Media Misfeeds 199
Solving Other Problems 202
Solving Problems with Printing Quality 208
Status, Error, and Service Messages 214
Standard Status Messages 214
Error Messages (Warning: ) 215
Error Messages (Operator Call: ) 219
Service Messages:
224
11 Installing Accessories .................................................................................. 225
Introduction 226
Antistatic Protection 226
Dual In-Line Memory Module (DIMM) 227
Installing a DIMM 227
Hard Disk Kit 230
Installing the Hard Disk drive 230
CompactFlash 233
Installing the CompactFlash card 233
Duplex Option 236
Installing the Duplex Option 236
Lower Feeder Unit 239
Kit Contents 239
Installing a Lower Feeder Unit 240
Staple Finisher 244
Accessories 244
Unpacking and installing the Staple Finisher 245
A Appendix ........................................................................................................ 255
Safety Specifications 256
Technical Specifications 256
Printer 256
Consumable Life Expectancy Chart 259
Our Concern for Environmental Protection 260
What is an ENERGY STAR product? 260
Contents
Downloaded From ManualsPrinter.com Manuals
v
vi
Downloaded From ManualsPrinter.com Manuals
Contents
Introduction
Downloaded From ManualsPrinter.com Manuals
1
Getting Acquainted with Your Printer
Space Requirements
To ensure easy operation, consumable replacement and maintenance,
adhere to the recommended space requirements detailed below.
704 mm (27.7")
100 mm
(3.9")
284 mm
(11.2")
420 mm (16.5")
420 mm (16.5")
462 mm (18.2")
100 mm
(3.9")
100 mm
(3.9")
Front View
100 mm
(3.9")
100 mm
(3.9")
1175 mm (46.3")
475 mm (18.7")
480 mm (18.9")
100 mm
(3.9")
420 mm (16.5")
420 mm
(16.5")
110 mm 110 mm
(4.3") (4.3")
934 mm (36.8")
294 mm
(11.6")
60 mm
(2.4")
Front View with Options
2
Getting Acquainted with Your Printer
Downloaded From ManualsPrinter.com Manuals
846 mm (33.3")
526 mm (20.7")
100 mm
(3.9")
Side View with Options
"
The options appear shaded in the above illustrations.
Getting Acquainted with Your Printer
Downloaded From ManualsPrinter.com Manuals
3
Printer Parts
The following drawings illustrate the parts of your printer referred to throughout this guide, so please take some time to become familiar with them.
Front View
1
1—Control panel
2
3
14
2—Output tray
3—Fuser unit
13
4—Right side cover
5—Tray 1 (Manual feed tray)
4
12
5
6—Transfer roller
11
7—Transfer belt unit
8—Tray 2
6
10
9
8
7
9—Print unit
10—Grip
11—Laser lens cleaning tool
6
12—Front cover
13—Waste toner bottle
14—Toner cartridge
7
9
P
U
S
H
Y
11
13
14
Y
4
Getting Acquainted with Your Printer
Downloaded From ManualsPrinter.com Manuals
Rear View
1
1—KONICA MINOLTA Digital Camera Direct Print Port
2—Power switch
3—Ozone filter
8
4—Power connection
5—Parallel port
6—10Base-T/100Base-TX/
1000Base-T Ethernet Interface
port
2
7
3
6
7—USB port
5
4
8—Ventilation grilles
Front View with Options
3
1—Duplex option
2—Lower feeder units (Tray 3 and
Tray 4)
1
3—Staple Finisher
2
Getting Acquainted with Your Printer
Downloaded From ManualsPrinter.com Manuals
5
Downloaded From ManualsPrinter.com Manuals
About the
Software
Downloaded From ManualsPrinter.com Manuals
2
Printer Driver CD-ROM
PostScript Drivers
Operating System
Windows XP/Server 2003/2000
Windows XP for 64bit
Windows Server 2003 for 64bit
"
Use/Benefit
These drivers give you access to all of
the printer features, including finishing and advanced layout. See also
“Displaying Printer Driver Settings (for
Windows)” on page 16.
A specific PPD file has been prepared for applications (such as PageMaker and Corel Draw) that require that a PPD file be specified when
printing.
When specifying a PPD file while printing on Windows XP, Server
2003, 2000 and NT 4.0, use the specific PPD file provided on the
Printer Driver CD-ROM.
PCL Drivers
Operating System
Windows XP/Server 2003/2000
Windows XP for 64bit
Windows Server 2003 for 64bit
Windows NT 4.0
8
Downloaded From ManualsPrinter.com Manuals
Use/Benefit
These drivers give you access to all of
the printer features, including finishing and advanced layout. See also
“Displaying Printer Driver Settings (for
Windows)” on page 16.
Printer Driver CD-ROM
PPD Files
Operating System
Use/Benefit
Windows XP/Server 2003/2000/NT
4.0
These PPD files allow you to install
the printer for a variety of platforms,
drivers, and applications.
Macintosh OS 9/X
These files are required in order to
use the printer driver for each operating system.
For details of the Macintosh and Linux
printer drivers, refer to the bizhub
C30P Reference Guide on the Utilities
and Documentation CD-ROM.
Linux
"
For details on the installation of the Windows printer drivers, refer to
the bizhub C30P Installation Guide on the Utilities and Documentation
CD-ROM.
Utilities and Documentation CD-ROM
Utilities
Utility
Use/Benefit
Download Manager
This utility, which can be used only if
(Windows XP/Server 2003/2000/NT the optional hard disk drive is
4.0, Macintosh OS 10.2.x or later)
installed, enables fonts and overlay
data to be downloaded to the printer
hard disk drive.
For details, refer to the Download
Manager online help for all of the functions.
Crown Print Monitor+ for Windows
Using the TCP/IP protocol, print jobs
can be sent directly to the printer. For
details, refer to the bizhub C30P Reference Guide on the Utilities and Documentation CD-ROM.
Utilities and Documentation CD-ROM
Downloaded From ManualsPrinter.com Manuals
9
10
Utility
Use/Benefit
Status Monitor (Windows only)
The current status of the printer in
addition to the status of consumables
and error information can be viewed.
For details, refer to See “Using the
Status Monitor (Windows Only)” on
page 23.
PageScope Net Care
Printer management functions such as
status monitoring and network settings
can be accessed.
For details, refer to the PageScope
Net Care Quick Guide on the Utilities
and Documentation CD-ROM.
PageScope Web Connection
With a Web browser, the status of
printers can be checked, and the various settings can be changed.
For details, refer to the bizhub C30P
Reference Guide on the Utilities and
Documentation CD-ROM.
PageScope Network Setup
Using the TCP/IP and IPX protocols,
basic network printer settings can be
specified.
For details, refer to the PageScope
Network Setup User Manual on the
Utilities and Documentation CD-ROM.
PageScope Plug and Print
This utility automatically detects a new
printer connected to the network and
creates a print object on the Windows
print server.
For details, refer to the PageScope
Plug and Print Quick Guide on the
Utilities and Documentation CD-ROM.
PageScope NDPS Gateway
This network utility enables printers
and KONICA MINOLTA multifunctional
products to be used in an NDPS environment.
For details, refer to the PageScope
NDPS Gateway User Manual on the
Utilities and Documentation CD-ROM.
Utilities and Documentation CD-ROM
Downloaded From ManualsPrinter.com Manuals
Utility
Use/Benefit
PageScope Direct Print
This application provides functions for
sending PDF and TIFF files directly to
a printer to be printed.
For details, refer to the PageScope
Direct Print Users Guide on the Utilities and Documentation CD-ROM.
Utilities and Documentation CD-ROM
Downloaded From ManualsPrinter.com Manuals
11
System Requirements
„ Personal computer
– Pentium 2: 400 MHz (Pentium 3: 500 MHz or higher is recommended)
– Power Mac G3 or later (G4 or later is recommended)
– Intel Core Duo (iMac or MacBook Pro) or leter
„ Operating System
– Microsoft Windows XP Home Edition/Professional (Service Pack 1 or
later; Service Pack 2 or later is recommended),
Windows XP Professional x64 Edition, Windows Server 2003,
Windows Server 2003 x64 Edition, Windows 2000 (Service Pack 4 or
later), Windows NT 4.0 (Service Pack 6)
– Mac OS 9 (9.1 or later), Mac OS X (10.2 or later) Classic mode
– Mac OS X (10.2 or later; We recommend installing the newest patch),
Mac OS X Server (10.2 or later)
– Red Hat Linux 9.0, SuSE Linux 8.2
„ Free hard disk space
– Approximately 20 MB of free hard disk space for printer driver and
Status Monitor
– Approximately 128 MB of free hard disk space for image processing
„ RAM
128 MB or more
„ CD-ROM/DVD drive
„ I/O interface
– 10Base-T/100Base-TX/1000Base-T Ethernet interface port
– USB Revision 2.0 compliant port
– Parallel (IEEE 1284) port
"
For details of the Macintosh and Linux printer drivers, refer to the
bizhub C30P Reference Guide on the Utilities and Documentation
CD-ROM.
12
Downloaded From ManualsPrinter.com Manuals
System Requirements
Selecting Driver Options/Defaults
(for Windows)
Before you start working with your printer, you are advised to verify/change
the default driver settings. Also, in case you have options installed, you
should “declare” the options in the driver.
Windows XP/Server 2003/2000/NT 4.0
1
Choose the driver’s properties as follows:
– (Windows XP/Server 2003)
From the Start menu, choose Printers and Faxes to display the
Printers and Faxes directory. Right-click the KONICA MINOLTA
bizhub C30P PCL6 or KONICA MINOLTA bizhub C30P PS printer
icon and choose Properties.
– (Windows 2000/NT 4.0)
From the Start menu, choose Settings and then Printers to display
the Printers directory. Right-click the KONICA MINOLTA bizhub C30P
PCL6 or KONICA MINOLTA bizhub C30P PS printer icon and choose
Properties.
2
3
4
5
– PostScript printer driver for Windows NT 4.0 is not supported.
If you have installed options, proceed with the next step. Otherwise, skip
to step 9.
Select the Configure tab.
Check that the installed options are correctly listed. If not, proceed with
the next step. Otherwise, continue with step 8.
Click the Refresh to automatically configure installed options.
"
6
The Refresh is available only if bi-directional communication is
available with the printer; otherwise it is grayed out.
From the Device Options list, select an option, one at a time, and then
select Enable or Disable from the Settings menu.
"
"
If Printer Memory is selected, select 256 MB, 512 MB, 768 MB or
1024 MB, according to the installed memory. The factory default
setting is 256 MB.
If Memory Card is selected, select Disable, Enable (1 GB
Under), or Enable (1 GB Over), according to the installed CompactFlash card.
Selecting Driver Options/Defaults (for Windows)
Downloaded From ManualsPrinter.com Manuals
13
7
Click Apply.
"
"
8
9
10
11
12
13
14
Depending on the version of the operating system, Apply may not
appear. If this is the case, continue with the next step.
With Windows NT 4.0, right-click the KONICA MINOLTA bizhub
C30P PCL6 printer icon in the Printers directory, and then click
Document Defaults. Skip to step 10.
Select the General tab.
Click Printing Preferences.
Printing Preference dialog box appears.
Select the default settings for your printer, such as the default media format you use, on the appropriate tabs.
Click Apply.
Click OK to exit from the Print preference dialog box.
Click OK to exit from the Properties dialog box.
Selecting Driver Options/Defaults (for Windows)
Downloaded From ManualsPrinter.com Manuals
Uninstalling the Printer Driver
(for Windows)
This section describes how to uninstall the KONICA MINOLTA bizhub C30P
printer driver if necessary.
Windows XP/Server 2003/2000/NT 4.0
1
2
Close all applications.
Choose the Uninstall Program as follows:
– (Windows XP/Server 2003)
From the Start menu, choose All programs, KONICA MINOLTA,
bizhub C30P, and then Uninstall Printer Driver.
– (Windows 2000/NT4.0)
3
4
5
6
From the Start menu, choose Programs, KONICA MINOLTA, bizhub
C30P, and then Uninstall Printer Driver.
When the Uninstall dialog box appears, select the name of the driver to be
deleted, and then click the Uninstall button.
Click Uninstall.
Click OK, and restart your computer.
The KONICA MINOLTA bizhub C30P printer driver will be uninstalled from
your computer.
Uninstalling the Printer Driver (for Windows)
Downloaded From ManualsPrinter.com Manuals
15
Displaying Printer Driver Settings
(for Windows)
Windows XP/Server 2003
1
2
From the Start menu, choose Printers and Faxes to display the Printers
and Faxes directory.
Right-click the KONICA MINOLTA bizhub C30P PCL6 or KONICA
MINOLTA bizhub C30P PS printer icon and choose Printing Preferences.
Windows 2000/NT 4.0
1
2
From the Start menu, point to Settings, and then click Printers to display
the Printers directory.
Display the printer driver settings:
„ Windows 2000—Right-click the KONICA MINOLTA bizhub C30P
PCL6 or KONICA MINOLTA bizhub C30P PS printer icon and choose
Printer Properties.
„ Windows NT 4.0—Right-click the KONICA MINOLTA PCL6 printer
icon and choose Document Defaults.
16
Displaying Printer Driver Settings (for Windows)
Downloaded From ManualsPrinter.com Manuals
Using the Postscript and PCL Printer Driver
Common Buttons
The buttons described below appear on each tab.
OK
Click to exit the Properties dialog box, saving any changes made.
Cancel
Click to exit the Properties dialog box without saving any changes made.
Apply
Click to save all changes without exiting the Properties dialog box.
"
Depending on the version of the operating system, Apply may not
appear.
Help
Click to view the help.
Easy Set
This allows the current settings to be saved. To save the current settings,
specify the desired settings, and then click Save. Specify the settings
described below, and the click OK.
„ Name: Type in the name of the settings to be saved.
„ Comment: Add a simple comment to the settings to be saved.
„ Sharing: Specify whether or not the settings to be saved can be used by
other users logged onto the computer.
Afterward, the saved settings can be selected from the drop-down list. To
change the registered setting, click Edit.
Select Defaults from the drop-down list to reset the functions in all tabs to
their default values.
Using the Postscript and PCL Printer Driver
Downloaded From ManualsPrinter.com Manuals
17
Paper View
Click the button to display a sample of the page layout in the figure area.
"
This button does not appear on the Advanced, Watermark, Quality,
and Version tabs.
Printer View
Click the button to display an image of the printer (with all installed options) in
the figure area.
"
This button does not appear on the Advanced and Version tabs.
Watermark View
Click this button to display a preview of the watermark.
"
This button appears only when the Watermark tab is selected.
Quality View
Click this button to display a sample of the settings selected in the Quality
tab.
"
This button appears only when the Quality tab is selected.
Default
Click this button to reset the settings to their defaults.
"
This button does not appear on the Advanced and Version tabs.
Advanced Tab (PostScript Printer Driver Only)
The Advanced Tab allows you to
„ Specify the PostScript output method
„ Specify whether or not the error messages of a print job are printed
„ Print a mirror image
„ Specify whether or not the application can directly output PostScript data
18
Using the Postscript and PCL Printer Driver
Downloaded From ManualsPrinter.com Manuals
Basic Tab
The Basic Tab allows you to
„ Specify the orientation of the media
„ Specify the size of the original document
„ Select the output media size
„ Zoom (expand/reduce) documents
„ Specify the paper source
„ Specify the type of media
„ Specify the number of copies
„ Turn on/off job collation
„ Turn on/off offset
„ Save a print job on the printer and print it later (Job Retention)
„ Save a confidential job on the printer and protect it with a password
„ Print a single copy for proofing
„ Send a notification by e-mail when printing is finished
„ Specify user information such as e-mail addresses and passwords
„ Specify user authentication and account track settings
„ Print on the back side of paper that has already been printed on
"
"
Use paper that has been printed on with bizhub C30P.
In addition, the page printed with this setting is not guaranteed.
Do not use the following types of paper.
- Paper that has been printed on with an inkjet printer
- Paper that has been printed on with a monochrome/color lase
printer/copier
- Paper that has been printed on with any other printer or fax machine
Layout Tab
The Layout Tab allows you to
„ Print several pages of a document on the same page (N-up printing)
„ Specify booklet printing
„ Rotate the print image 180 degrees
„ Specify duplex (Double-Sided) printing
„ Select the output tray for the staple finisher
„ Select whether or not to staple with the staple finisher
Using the Postscript and PCL Printer Driver
Downloaded From ManualsPrinter.com Manuals
19
„ Specify whether or not blank pages are printed (PCL printer driver only)
„ Adjust the binding margin (PCL printer driver only)
„ Adjust the printing position (PCL printer driver only)
Cover Page Tab
The Cover Page Tab allows you to
„ Print front and back cover pages and separator pages
„ Specify the Lower Feeder Unit that contains the paper for the front and
back cover pages and separator pages
Overlay Tab
"
Be sure to use overlays with print jobs with a paper size and orientation that matches the overlay form.
In addition, if settings have been specified for “N-up” or “Booklet” in
the printer driver, the overlay form cannot be adjusted to match the
specified settings.
The Overlay Tab allows you to
„ Select the form to use
„ Add or delete overlay files
„ Launch Download Manager to download a form (PostScript printer driver
only)
"
Download Manager Application should be installed earlier.
„ Create a form (PCL printer driver only)
„ Specify that the document and form are printed overlapping (PCL printer
driver only)
„ Display the form information (PCL printer driver only)
„ Print the form on All Pages, First Page, Even Pages and Odd Pages
„ Place the form in back of the document or in front on the printed document (PCL printer driver only)
Watermark Tab
The Watermark Tab allows you to
„ Select the watermark to be used
„ Create, edit or delete watermarks
„ Lighten the density of the watermark
20
Using the Postscript and PCL Printer Driver
Downloaded From ManualsPrinter.com Manuals
„ Print the watermark on only the first page
„ Print the watermark repeatedly throughout the all pages (PostScript
printer driver only)
Quality Tab
The Quality Tab allows you to
„ Switch between color and grayscale printing
„ Control the darkness of an image (Brightness)
„ Specify the printer color settings (Quick Color)
„ Specify the resolution for the printout
„ Perform color separation
„ Select whether or not economy printing is used
„ Set the edge strength to Low, Middle or High
„ Turn on/off glossy mode
„ Specify the format of fonts that are to be downloaded
„ Print using the printer’s fonts
„ Control the tones of an image (Contrast) (PCL printer driver only)
„ Specify the image compression method (PCL printer driver only)
Version Tab
The Version Tab allows you to view information about the printer driver.
Limitations on printer driver functions installed with
Point and Print
If Point and Print is performed with the following server and client combinations, there are limitations on some printer driver functions.
„ Server and client combinations
Server: Windows Server 2003/XP/2000
Client: Windows NT 4.0
„ Functions with limitations applied
Booklet, Skip Blank Pages, Front Cover Page, Back Cover Page, Separator Page, Create Overlay, Print Overlay, Watermark
*JOBNAME, USERNAME, and HOSTNAME output of PJL
When using these operating system combinations, install the printer driver on
the client with a local connection, and then specify the shared printer installed
on the server as the connection.
Using the Postscript and PCL Printer Driver
Downloaded From ManualsPrinter.com Manuals
21
22
Using the Postscript and PCL Printer Driver
Downloaded From ManualsPrinter.com Manuals
Using the Status
Monitor
(Windows Only)
Downloaded From ManualsPrinter.com Manuals
3
Working with the Status Monitor
Introduction
The Status Monitor shows information about the current status of the printer.
The Status Monitor can be installed from the Utilities and Documentation
CD-ROM.
For details on the installation, refer to the bizhub C30P Reference Guide on
the Utilities and Documentation CD-ROM.
Operating Environment
The Status Monitor can be used on computers running Windows XP/
Server 2003/2000/NT 4.0 connected to the printer using an Ethernet connection.
Opening the Status Monitor
Use one of the following steps to open the Status Monitor:
„ Windows XP/Server 2003—From the Start menu, choose All Programs, KONICA MINOLTA, and then Status Monitor. Double-click the
Status Monitor icon displayed in the taskbar.
„ Windows 2000/NT 4.0—From the Start menu, choose Programs, KONICA MINOLTA, and then Status Monitor. Double-click the Status Monitor
icon displayed in the taskbar.
Using the Status Monitor
Status Tab
„ Select Printer—Selects the printer whose status is displayed. In addition,
the messages that appear in the message window of the selected printer
are displayed.
„ Graphic—Shows a graphic representation of the printer and indicates
where the problem is. When the background of the printer graphic is red
or yellow, there is an error and the job has been interrupted.
„ Advanced Options—Click Advanced Options to display the Advanced
Options dialog box. From the Advanced Options dialog box, select
whether the Status Monitor automatically starts when the operating system is started.
„ Printer Alerts—Displays text messages that alert you of conditions such
as low toner.
24
Working with the Status Monitor
Downloaded From ManualsPrinter.com Manuals
„ Recovery Instructions—Provides you with explanations of what you
need to do in order to correct problems and recover from error conditions.
Consumables Tab
Displays the usage status (approximate percentage remaining) of each toner
consumables.
„ Refresh—Rechecks the supplies and displays their status.
"
Click Help to display windows containing explanations of the Status
Monitor functions. Refer to this help for detailed information.
Recognizing Status Monitor Alerts
When the Status Monitor detects a printing problem, the icon on the Windows
task bar changes from green (normal) to yellow (warning), magenta or red
(error), depending on the severity of the printer problem.
Recovering from a Status Monitor Alert
When the Status Monitor notifies you of a printing problem, double-click its
icon on the Windows task bar to open the Status Monitor. The Status Monitor
identifies what type of error has occurred.
Closing the Status Monitor
Click Close to close the Status Monitor window. To exit Status Monitor,
right-click the Status Monitor icon in the taskbar, and then click Exit.
Recognizing Status Monitor Alerts
Downloaded From ManualsPrinter.com Manuals
25
Downloaded From ManualsPrinter.com Manuals
Printer Control
Panel and
Configuration
Menu
Downloaded From ManualsPrinter.com Manuals
4
About the Control Panel
The control panel, located on the top of the printer, allows you to direct the
printer’s operation. In addition, it displays the current status of the printer,
including any condition that needs your attention.
1
4
5
8
7
6
3
MESSAGE
WINDOW
MENU
YMCK
2
Control Panel Indicators and Keys
No.
Indicator
Off
On
1
The printer is not ready
to accept data.
The printer is ready to
accept data.
(Flashes while data is
being received or while
printing.)
2
No problem.
The printer requires
operator attention.
(usually accompanied by
a status message in the
message window.)
28
Downloaded From ManualsPrinter.com Manuals
About the Control Panel
No.
Key
3
Function
„ Cancels the currently displayed menu or menu
choice
„ Allows you to cancel one or all print jobs that
are currently being printed or processed:
1. Press the Cancel key.
2. Press the
or
keys to select either CUR-
RENT JOB or ALL JOBS.
3. Press the Menu/Select key.
The print job(s) is (are) cancelled.
4
„ Enters the menu system
„ Moves down in the menu structure
„ Applies the selected setting
appears in the message window
„
5
„ Moves the cursor up
„ Returns to the status screen from the help
screen
„ Within a menu choice that is changeable character by character, scrolls upward through the
available characters
„
6
,
appears in the message window
„ Moves the cursor to the right
„ Displays the next help screen
„
7
appears in the message window
„ Moves the cursor down
„ Displays the help screen when an error occurs
„ Within a menu choice that is changeable character by character, scrolls downward through
the available characters
„
About the Control Panel
Downloaded From ManualsPrinter.com Manuals
,
appears in the message window
29
No.
Key
Function
8
„ Moves the cursor to the left
„ Displays the previous help screen
„
appears in the message window
Message Window
The current status of the printer, the amount of toner remaining, and any error
messages can be viewed from the message window.
1
2
3
4
MENU
YMCK
No.
Details
1
The current status of the printer is displayed.
„ If the operator or service representative must be called, the symbol
and the error status are displayed.
„ If a warning occurs, the symbol
appears.
„ When a digital camera is connected to the KONICA MINOLTA
Digital Camera Direct Print Port with a USB cable, the symbol
appears on the right side of the message window.
„ When a USB memory device is plugged into the KONICA
MINOLTA Digital Camera Direct Print Port, the symbol
pears on the right side of the message window.
ap-
„ While a print job is being received, the symbol
appears on the
right side of the message window. While a camera direct or memory direct print job is being received, the symbol
2
appears.
„ Error messages are displayed.
„ While a print job is being received, the user name and the print
progress are displayed.
„ While updating the firmware, the type of firmware being updated
and the update progress are displayed.
30
Downloaded From ManualsPrinter.com Manuals
About the Control Panel
No.
Details
3
Key information is displayed.
4
The approximate amount of toner remaining is displayed.
Help Screens
The help screens appear when the
key is pressed after an error occured,
such as a media misfeed, so that the error can be corrected.
About the Control Panel
Downloaded From ManualsPrinter.com Manuals
31
Configuration Menu Overview
The bizhub C30P configuration menu accessible from the control panel is
structured as shown below.
Main Menu
READY
PROOF/
PRINT MENU*
PRINT
MENU
PAPER
MENU
QUALITY
MENU
MEMORY DIRECT**
CAMERA DIRECT***
INTERFACE
MENU
SYS DEFAULT
MENU
MAINTENANCE
MENU
SERVICE
MENU
"
32
* This menu item appears only if an optional hard disk drive is
installed.
** This menu item appears when INTERFACE MENU/MEMORY
DIRECT is set to ENABLE, and the optional hard disk drive or a CompactFlash card is installed.
*** This menu item appears when INTERFACE MENU/CAMERA
DIRECT is set to ENABLE.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
"
MEMORY DIRECT and CAMERA DIRECT do not appear if public
user access has not been permitted through authentication settings.
For details on the authentication settings, refer to the bizhub C30P
Reference Guide on the Utilities and Documentation CD-ROM.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
33
PROOF/PRINT MENU
"
This menu item appears only if an optional hard disk drive is installed.
With this menu item, print jobs that were set to be saved on the hard disk by
using Job Retention on the Basic tab of the printer driver can be printed or
deleted.
"
All factory default values are shown in bold.
PROOF/
PRINT MENU
“User name”
“Job name”
PRINT
DELETE
“Job name”
COPIES
1
“Job name”
YES
NO
Printing/Deleting a Stored Job
1
Follow the procedure described below to select a job.
Press Key
Until Display Reads
PROOF/PRINT MENU
“User name”
If no print jobs have been stored on the hard disk,
NO STORED JOB appears.
34
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
Press Key
Until Display Reads
Desired user name
,
Press until the desired
user name appears.
“Job name”
Desired job name
,
Press until the desired
job name appears.
PRINT
DELETE
If the selected print job was set as a secured job
from the printer driver, a screen for entering the
password appears. For details on typing the
password, refer to “Entering the Password” on page
36.
2
Select PRINT or DELETE, and then press the Menu/Select key.
"
3
4
5
6
If PRINT was selected, continue with step 3.
If DELETE was selected, continue with step 5.
Press the
and
keys to specify the number of copies to be printed.
(Settings: 1 to 999; Default: 1)
Press the Menu/Select key.
Printing begins.
Select YES or NO.
Press the Menu/Select key.
If YES was selected, the print job is deleted.
If NO was selected, the PRINT/DELETE selection screen appears
again.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
35
Entering the Password
If the print job selected in the PROOF/PRINT MENU is a secured job, a
screen for entering the password appears. Follow the procedure described
below to type in the four-digit password specified from the printer driver.
1
2
3
4
5
Press the
password.
and
keys to increase or decrease the first digit of the
Press the
key to move the cursor to the next digit.
Press the
password.
and
keys to increase or decrease the second digit of the
Continue these steps until all four digits of the password are specified.
Press the Menu/Select key.
The PRINT/DELETE selection screen appears.
"
36
If an incorrect password is entered, INVALID ENTRY appears and
the screen for entering the password appears again.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
PRINT MENU
With this menu, printer information, such as the configuration page and the
demo page, can be printed.
PRINT MENU
CONFIGURATION
PG
STATISTICS PAGE
FONT LIST
POSTSCRIPT
PCL
MENU MAP
DIRECTORY LIST*
"
"
* This menu item appears only if an optional hard disk drive is
installed.
All factory default values are shown in bold.
CONFIGURATION PG
Settings
STATISTICS
PAGE
Settings
FONT LIST
POST
SCRIPT
Settings
PCL
Settings
PRINT/CANCEL
Prints the configuration page.
PRINT/CANCEL
Prints the statistics page such as the number of pages
printed.
PRINT/CANCEL
Prints the PostScript font list.
PRINT/CANCEL
Prints the PCL font list.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
37
MENU MAP
Settings
PRINT/CANCEL
Prints the menu map.
DIRECTORY
LIST
38
Settings
PRINT/CANCEL
Prints the directory list of the hard disk.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
PAPER MENU
With this menu, the paper used for printing can be managed.
PAPER MENU
PAPER SOURCE
DEFAULT TRAY
DUPLEX***
TRAY 1
PAPER SIZE
COPIES
CUSTOM SIZE*
COLLATE****
PAPER TYPE
FINISHING*****
TRAY 2
JOB
SEPARATION*****
IMAGE
ROTATION******
PAPER SIZE
PAPER TYPE
TRAY 3**
PAPER SIZE
PAPER TYPE
TRAY 4**
PAPER SIZE
TRAY CHAINING
PAPER TYPE
TRAY MAPPING
TRAY MAPPING
MODE
LOGICAL TRAY
0
LOGICAL TRAY
9
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
39
"
40
* This menu item appears only when you select CUSTOM from the
TRAY 1/PAPER SIZE menu.
** These menu items appear only if one or both of the optional lower
feeder units are installed.
*** This menu item appears only if the optional duplex unit (Duplex
Option) is installed.
**** This menu item appears only if the optional hard disk drive or a
CompactFlash card of 1 GB or more is installed.
***** This menu item appears only if the optional staple finisher is
installed.
****** This menu item appears only if the optional staple finisher is not
installed.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
"
All factory default values are shown in bold.
PAPER DEFAULT Settings
SOURCE TRAY
TRAY 1/TRAY 2/
TRAY 3/TRAY 4
The Lower Feeder Unit that is normally used can be
specified.
" TRAY
3 and TRAY 4 appear only if the
optional lower feeder units are installed.
TRAY 1
PAPER
SIZE
Settings
ANY/LETTER/LEGAL/
EXECUTIVE/A4/A5/A6/
B5(JIS)/B6(JIS)/GOVT
LETTER/STATEMENT/
FOLIO/SP FOLIO/UK
QUARTO/FOOLSCAP/GOVT
LEGAL/16K/PHOTO
10×15/KAI 16/KAI 32/
ENV C5/ENV C6/ENV DL/
ENV MONARCH/ENV
CHOU#3/ENV CHOU#4/
B5(ISO)/ENV #10/ENV
YOU#4/JPOST/JPOST-D/
CUSTOM
Select the setting for the size of paper
loaded into Tray 1.
" Depending on the setting selected
for SYS DEFAULT MENU/
PAPER/UNIT OF MEASURE,
PHOTO 10×15 may change to
PHOTO 4×6.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
41
CUSTOM Specify the paper size when custom-sized
paper is loaded into Tray 1.
SIZE
The setting units can be switched between
millimeters and inches with the SYS
DEFAULT MENU/PAPER/UNIT OF
MEASURE setting.
Setting range for WIDTH
„ For MILLIMETERS: 92 to 216 mm
(default)
– 210 mm
„ For INCHES: 3.63 to 8.50 inches
(default)
– 8.26 inches
Setting range for LENGTH
„ For MILLIMETERS: 148 to 356 mm
(default)
– 297 mm
„ For INCHES: 5.83 to
14.00 inches
(default)
– 11.69 inches
" This menu item appears only if
PAPER SIZE is set to CUSTOM.
42
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
PAPER
TYPE
Settings
ANY/PLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/LABEL/
TRANSPARENCY/
ENVELOPE/POSTCARD/
LETTERHEAD/GLOSSY 1/
GLOSSY 2
Select the setting for the type of paper
loaded into Tray 1.
TRAY 2
PAPER
SIZE
Settings
PAPER
TYPE
Settings
LETTER/A4
Select the setting for the size of paper
loaded into Tray 2.
ANY/PLAIN PAPER/
RECYCLED
Select the setting for the type of paper
loaded into Tray 2.
TRAY 3
TRAY 4
PAPER
SIZE
The size of paper loaded in Tray 3 and
Tray 4 is indicated.
This menu item only shows the current
setting. This setting cannot be changed.
PAPER
TYPE
Settings
ANY/PLAIN PAPER/
RECYCLED
Select the setting for the type of paper
loaded into Tray 3/Tray 4.
Settings ON/OFF
TRAY
CHAINING If ON is selected and the specified Lower Feeder Unit
runs out of paper during printing, a Lower Feeder
Unit loaded with paper of the same size is
automatically selected so printing can continue.
If OFF is selected and the specified Lower Feeder
Unit runs out of paper, printing stops.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
43
Settings ON/OFF
TRAY
TRAY
MAPPING MAPPING Select whether or not the Tray Mapping
MODE
function is used.
LOGICAL Settings
TRAY
0-9
PHYSICAL
PHYSICAL
PHYSICAL
PHYSICAL
TRAY1/
TRAY2/
TRAY3/
TRAY4
Select the tray that is used for printing
when a print job is received from another
manufacturer’s printer driver.
The default setting for LOGICAL
TRAY 1 is PHYSICAL TRAY1. The
default setting for all other trays is PHYSICAL TRAY2.
" PHYSICAL
TRAY3 and
PHYSICAL TRAY4 appear only if
an optional lower feeder unit is
installed.
DUPLEX Settings
OFF/LONG EDGE/SHORT EDGE
If LONG EDGE is selected, the pages will be printed on both sides
of the paper for long-edge binding.
If SHORT EDGE is selected, the pages will be printed on both
sides of the paper for short-edge binding.
The setting specified in the printer driver will override this menu
setting.
COPIES Settings
1-9999
Specify the number of copies to be printed.
The setting specified in the printer driver will override this menu
setting.
COLLATE Settings
ON/OFF
If ON is selected, all pages of the document are printed before the
next copy is printed.
If OFF is selected, all copies of the document are not printed
separately.
The setting specified in the printer driver will override this menu
setting.
44
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
Settings
FINSUB TRAY/MAIN TRAY/OFFSET/STAPLING
ISHING When SUB TRAY is selected, the paper is fed to the sub output
tray.
When MAIN TRAY is selected, the paper is fed to the main output tray.
When OFFSET is selected, the paper is fed to the main output
tray with each copy slightly shifted.
When STAPLING is selected, each copy is stapled and fed to the
main output tray.
The setting specified in the printer driver will override this menu
setting.
Settings
JOB
ON/OFF
SEPA- The paper is fed to the main output tray with each print job slightly
RATION shifted.
" If FINISHING is set to SUB
TRAY, the print jobs are fed
out stacked on top of each other without begin shifted.
" If FINISHING is set to STAPLING, the print jobs are
stapled before being fed out.
IMAGE
ROTATION
Settings
ON/OFF
If ON is selected, the image is rotated 180 degrees before each
copy is fed out. If OFF is selected, the image is not rotated.
" If PAPER TYPE is set to ENVELOPE, the image cannot be
rotated.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
45
QUALITY MENU
With this menu, settings for the print quality can be specified.
QUALITY MENU
COLOR MODE
BRIGHTNESS
HALFTONE
IMAGE PRINTING
TEXT PRINTING
GRAPHICS
PRINTING
EDGE
ENHANCEMENT
IMAGE PRINTING
TEXT PRINTING
GRAPHICS
PRINTING
EDGE STRENGTH
ECONOMY PRINT
GLOSSY MODE
PCL SETTING
CONTRAST
IMAGE PRINTING
RGB SOURCE
RGB INTENT
RGB GRAY
46
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
TEXT PRINTING
RGB SOURCE
RGB INTENT
RGB GRAY
GRAPHICS
PRINTING
RGB SOURCE
RGB INTENT
RGB GRAY
PS SETTING
IMAGE PRINTING
RGB SOURCE
RGB INTENT
RGB GRAY
DESTINATION
PROF
TEXT PRINTING
RGB SOURCE
RGB INTENT
RGB GRAY
DESTINATION
PROF
GRAPHICS
PRINTING
RGB SOURCE
RGB INTENT
RGB GRAY
DESTINATION
PROF
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
47
CALIBRATION
SIMULATION
SIMULATION PROF
TONE CALIBRATION
SIMULATION
INTENT
AIDC PROCESS
CMYK GRAY
CMYK DENSITY
COLOR
SEPARATION
"
All factory default values are shown in bold.
COLOR
MODE
Settings
COLOR/GRAYSCALE
If COLOR is selected, the pages are printed in full color.
If GRAYSCALE is selected, the pages are printed in black
and white.
BRIGHTNESS
Settings
-15%/-10%/-5%/0%/+5%/+10%/
+15%
The brightness of the printed image can be adjusted.
HALFTONE
IMAGE
PRINTING
Settings
LINE ART/DETAIL/
SMOOTH
Select how halftones in images are
reproduced.
If LINE ART is selected, halftones are
reproduced with high precision.
If DETAIL is selected, halftones are
reproduced with detail.
If SMOOTH is selected, halftones are
reproduced with smoothness.
48
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
TEXT
PRINTING
Settings
LINE ART/DETAIL/
SMOOTH
Select how halftones in text are
reproduced.
If LINE ART is selected, halftones are
reproduced with high precision.
If DETAIL is selected, halftones are
reproduced with detail.
If SMOOTH is selected, halftones are
reproduced with smoothness.
GRAPHICS
PRINTING
Settings
LINE ART/DETAIL/
SMOOTH
Select how halftones in graphics are
reproduced.
If LINE ART is selected, halftones are
reproduced with high precision.
If DETAIL is selected, halftones are
reproduced with detail.
If SMOOTH is selected, halftones are
reproduced with smoothness.
EDGE
ENHANCEMENT
IMAGE
PRINTING
Settings
ON/OFF
Select whether image edges are
emphasized.
If ON is selected, the edges are emphasized.
If OFF is selected, the edges are not
emphasized.
" If ECONOMY
PRINT is set to ON,
the edges cannot be emphasized.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
49
TEXT
PRINTING
Settings
ON/OFF
Select whether text edges are
emphasized.
If ON is selected, the edges are emphasized.
If OFF is selected, the edges are not
emphasized.
GRAPHICS
PRINTING
Settings
ON/OFF
Select whether graphic edges are
emphasized.
If ON is selected, the edges are emphasized.
If OFF is selected, the edges are not
emphasized.
" If ECONOMY
PRINT is set to ON,
the edges cannot be emphasized.
EDGE
STRENGTH
Settings
OFF/LOW/MIDDLE/HIGH
Select the desired amount that edges are emphasized.
If OFF is selected, the edges are not emphasized.
If LOW is selected, the edges are slightly emphasized.
If MIDDLE is selected, the edges are emphasized by an
average amount.
If HIGH is selected, the edges are highly emphasized.
" If OFF is selected, the edges are not emphasized,
even if an EDGE ENHANCEMENT menu item is set
to ON.
50
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
ECONOMY
PRINT
Settings
ON/OFF
Select whether to print graphics with a reduced density by
reducing the amount of toner that is used.
If ON is selected, the amount of toner used is reduced when
printing.
If OFF is selected, the amount of toner used is not reduced
when printing.
" If GLOSSY
MODE is set to ON, the amount of toner
used is not reduced when printing, even if ON was
selected for this menu item.
" If ON is selected, the edges are not emphasized, even
if IMAGE PRINTING and GRAPHICS PRINTING
of the EDGE ENHANCEMENT menu item are set to
ON.
GLOSSY
MODE
Settings
ON/OFF
Select whether to relax the limitations on the amount of
toner used in order to widen the color reproduction range
and produce glossy prints.
If ON is selected, glossy prints are produced.
If OFF is selected, glossy prints are not produced.
" If ON is selected, the amount of toner used is not
reduced when printing, even if ECONOMY PRINT
is set to ON.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
51
PCL
SETTING
CONTRAST
Settings
-15%/-10%/-5%/0%/
+5%/+10%/+15%
The contrast of the image can be
adjusted.
IMAGE
PRINTING
Settings
RGB
SOURCE
DEVICE COLOR/
sRGB
Specify the color space for
RGB image data.
If DEVICE COLOR is
selected, no color space is
specified.
If RGB source profiles are
downloaded with the Download
Manager, they are available
from the list of settings.
Settings
RGB
INTENT
VIVID/
PHOTOGRAPHIC
Specify the characteristic
applied when converting RGB
image data to CMYK data.
If VIVID is selected, a vivid
output is produced.
If PHOTOGRAPHIC is
selected, a brighter output is
produced.
52
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
RGB
GRAY
Settings
COMPOSITE
BLACK/BLACK
AND GRAY/
BLACK ONLY
Specify how black and grays
are reproduced in RGB image
data.
If COMPOSITE BLACK is
selected, black is reproduced
using the CMYK colors.
If BLACK AND GRAY is
selected, black and gray are
reproduced using black only.
If BLACK ONLY is selected,
black is reproduced using only
black.
TEXT
PRINTING
Settings
RGB
SOURCE
DEVICE COLOR/
sRGB
Specify the color space for
RGB text data.
If DEVICE COLOR is
selected, no color space is
specified.
If RGB source profiles are
downloaded with the Download
Manager, they are available
from the list of settings.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
53
Settings
RGB
INTENT
VIVID/
PHOTOGRAPHIC
Specify the characteristic
applied when converting RGB
text data to CMYK data.
If VIVID is selected, a vivid
output is produced.
If PHOTOGRAPHIC is
selected, a brighter output is
produced.
RGB
GRAY
Settings
COMPOSITE
BLACK/BLACK
AND GRAY/
BLACK ONLY
Specify how black and grays
are reproduced in RGB text
data.
If COMPOSITE BLACK is
selected, black is reproduced
using the CMYK colors.
If BLACK AND GRAY is
selected, black and gray are
reproduced using black only.
If BLACK ONLY is selected,
black is reproduced using only
black.
GRAPHICS
PRINTING
Settings
RGB
SOURCE
DEVICE COLOR/
sRGB
Specify the color space for
RGB GRAPHICS data.
If DEVICE COLOR is
selected, no color space is
specified.
If RGB source profiles are
downloaded with the Download
Manager, they are available
from the list of settings.
54
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
Settings
RGB
INTENT
VIVID/
PHOTOGRAPHIC
Specify the characteristic
applied when converting RGB
GRAPHICS data to CMYK
data.
If VIVID is selected, a vivid
output is produced.
If PHOTOGRAPHIC is
selected, a brighter output is
produced.
RGB
GRAY
Settings
COMPOSITE
BLACK/BLACK
AND GRAY/
BLACK ONLY
Specify how black and grays
are reproduced in RGB
GRAPHICS data.
If COMPOSITE BLACK is
selected, black is reproduced
using the CMYK colors.
If BLACK AND GRAY is
selected, black and gray are
reproduced using black only.
If BLACK ONLY is selected,
black is reproduced using only
black.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
55
PS
SETTINGS
IMAGE
PRINTING
Settings
RGB
SOURCE
DEVICE COLOR/
sRGB/
AppleRGB/
AdobeRGB1998/
ColorMatchRGB
/
BlueAdjustRGB
Specify the color space for
RGB image data.
If DEVICE COLOR is
selected, no color space is
specified.
If RGB source profiles are
downloaded with the Download
Manager, they are available
from the list of settings.
Settings
RGB
INTENT
VIVID/
PHOTOGRAPHIC/
RELATIVE
COLOR/
ABSOLUTE
COLOR
Specify the characteristic
applied when converting RGB
image data to CMYK data.
If VIVID is selected, a vivid
output is produced.
If PHOTOGRAPHIC is
selected, a brighter output is
produced.
If RELATIVE COLOR is
selected, relative color is
applied to the RGB source
profile.
If ABSOLUTE COLOR is
selected, absolute color is
applied to the RGB source
profile.
56
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
RGB
GRAY
Settings
COMPOSITE
BLACK/BLACK
AND GRAY/
BLACK ONLY
Specify how black and grays
are reproduced in RGB image
data.
If COMPOSITE BLACK is
selected, black is reproduced
using the CMYK colors.
If BLACK AND GRAY is
selected, black and gray are
reproduced using black only.
If BLACK ONLY is selected,
black is reproduced using only
black.
DESTI- Settings AUTO
NATION Specify the destination profile.
PROF
If AUTO is selected, a
destination profile that the
printer automatically adapts is
selected based on a
combination of the specified
color matching, halftones and
other profiles.
If destination profiles are
downloaded with the Download
Manager, they are available
from the list of settings.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
57
TEXT
PRINTING
Settings
RGB
SOURCE
DEVICE COLOR/
sRGB/
AppleRGB/
AdobeRGB1998/
ColorMatchRGB
/
BlueAdjustRGB
Specify the color space for
RGB text data.
If DEVICE COLOR is
selected, no color space is
specified.
If RGB source profiles are
downloaded with the Download
Manager, they are available
from the list of settings.
Settings
RGB
INTENT
VIVID/
PHOTOGRAPHIC/
RELATIVE
COLOR/
ABSOLUTE
COLOR
Specify the characteristic
applied when converting RGB
text data to CMYK data.
If VIVID is selected, a vivid
output is produced.
If PHOTOGRAPHIC is
selected, a brighter output is
produced.
If RELATIVE COLOR is
selected, relative color is
applied to the RGB source
profile.
If ABSOLUTE COLOR is
selected, absolute color is
applied to the RGB source
profile.
58
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
RGB
GRAY
Settings
COMPOSITE
BLACK/BLACK
AND GRAY/
BLACK ONLY
Specify how black and grays
are reproduced in RGB text
data.
If COMPOSITE BLACK is
selected, black is reproduced
using the CMYK colors.
If BLACK AND GRAY is
selected, black and gray are
reproduced using black only.
If BLACK ONLY is selected,
black is reproduced using only
black.
DESTI- Settings AUTO
NATION Specify the destination profile.
PROF
If AUTO is selected, a
destination profile that the
printer automatically adapts is
selected based on a
combination of the specified
color matching, halftones and
other profiles.
If destination profiles are
downloaded with the Download
Manager, they are available
from the list of settings.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
59
GRAPHICS
PRINTING
Settings
RGB
SOURCE
DEVICE COLOR/
sRGB/
AppleRGB/
AdobeRGB1998/
ColorMatchRGB
/
BlueAdjustRGB
Specify the color space for
RGB image data.
If DEVICE COLOR is
selected, no color space is
specified.
If RGB source profiles are
downloaded with the Download
Manager, they are available
from the list of settings.
Settings
RGB
INTENT
VIVID/
PHOTOGRAPHIC/
RELATIVE
COLOR/
ABSOLUTE
COLOR
Specify the characteristic
applied when converting RGB
image data to CMYK data.
If VIVID is selected, a vivid
output is produced.
If PHOTOGRAPHIC is
selected, a brighter output is
produced.
If RELATIVE COLOR is
selected, relative color is
applied to the RGB source
profile.
If ABSOLUTE COLOR is
selected, absolute color is
applied to the RGB source
profile.
60
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
RGB
GRAY
Settings
COMPOSITE
BLACK/BLACK
AND GRAY/
BLACK ONLY
Specify how black and grays
are reproduced in RGB image
data.
If COMPOSITE BLACK is
selected, black is reproduced
using the CMYK colors.
If BLACK AND GRAY is
selected, black and gray are
reproduced using black only.
If BLACK ONLY is selected,
black is reproduced using only
black.
DESTI- Settings AUTO
NATION Specify the destination profile.
PROF
If AUTO is selected, a
destination profile that the
printer automatically adapts is
selected based on a
combination of the specified
color matching, halftones and
other profiles.
If destination profiles are
downloaded with the Download
Manager, they are available
from the list of settings.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
61
SIMULATION
SIMU- Settings
LATION
PROF
NONE/SWOP/
Euroscale/
CommercialPre
ss/TOYO/DIC
Specify the simulation profile.
If NONE is selected, no
simulation profile is specified.
If simulation profiles are
downloaded with the Download
Manager, they are available
from the list of settings.
SIMU- Settings
LATION
INTENT
RELATIVE
COLOR/
ABSOLUTE
COLOR
Specify the characteristic of the
simulation profile.
If RELATIVE COLOR is
selected, relative color is
applied to the simulation
profile.
If ABSOLUTE COLOR is
selected, absolute color is
applied to the simulation
profile.
62
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
CMYK
GRAY
Settings
COMPOSITE
BLACK/BLACK
AND GRAY/
BLACK ONLY
Specify how black and grays
are reproduced using the four
CMYK colors.
If COMPOSITE BLACK is
selected, black is reproduced
using the CMYK colors.
If BLACK AND GRAY is
selected, black and gray are
reproduced using black only.
If BLACK ONLY is selected,
black is reproduced using only
black.
CALIBRATION
Settings ON/OFF
TONE
CALIBRATION If ON is selected, image adjustments are
applied.
If OFF is selected, image adjustments are
not applied.
AIDC
PROCESS
Settings
EXECUTE/CANCEL
If EXECUTE is selected, image
adjustments are performed immediately.
If CANCEL is selected, image adjustments are not performed.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
63
CMYK
DENSITY
CYAN/ HIGHMAGENTA/ LIGHT
YELLOW/
BLACK
Settings
-3/-2/
-1/0/
+1/+2/
+3
The density of the
highlight color in
images can be
adjusted.
MIDDLE Settings -3/-2/
-1/0/
+1/+2/
+3
The density of the
middle color in
images can be
adjusted.
SHADOW Settings -3/-2/
-1/0/
+1/+2/
+3
The density of the
shadow color in
images can be
adjusted.
COLOR
SEPARATION
Settings
ON/OFF
If ON is selected, color separation are performed. The
contents of a color page is separated into the color pages
for yellow, magenta, cyan and black, and each is printed
with black gradations as individual pages. The printing order
is yellow, magenta, cyan, then black.
If OFF is selected, color separation is not performed. A
normal color separation is performed.
64
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
MEMORY DIRECT
This menu item appears when INTERFACE MENU/MEMORY DIRECT is
set to ENABLE, and the optional hard disk drive or a CompactFlash card is
installed.
In addition, this menu item does not appear if public user access has not
been permitted through authentication settings. For details on the authentication settings, refer to the bizhub C30P Reference Guide on the Utilities and
Documentation CD-ROM.
With this memu, settings for “memory direct” function can be specified.
"
For details on memory direct, refer to “Memory Direct” on page 96.
MEMORY DIRECT
LIST OF FILES*
TYPE OF FILES
"
"
* This menu item appears when a USB memory device is plugged into
the KONICA MINOLTA Digital Camera Direct Print Port.
All factory default values are shown in bold.
LIST
OF
FILES
Select the file that you wish to output, and then press the Menu/
Select key.
If the file to be printed is in a folder, select the folder, and then
press the Menu/Select key.
Settings
PRINT
Select this setting to output a file.
Settings
CANCEL
Select this setting to stop outputting and to return to the file list.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
65
A4
Settings
LETTER/LEGAL/EXECUTIVE/A4/
A5/A6/B5(JIS)/B6(JIS)/GOVT
LETTER/STATEMENT/FOLIO/SP
FOLIO/UK QUARTO/FOOLSCAP/
GOVT LEGAL/16K/PHOTO 10×15/
KAI 16/KAI 32/ENV C5/ENV
C6/ENV DL/ENV MONARCH/ENV
CHOU#3/ENV CHOU#4/B5(ISO)/
ENV #10/ENV YOU#4/JPOST/
JPOST-D/CUSTOM
Change the size of the paper.
" Depending on the setting selected for SYS
DEFAULT MENU/PAPER/UNIT OF
MEASURE, PHOTO 10×15 may change to
PHOTO 4×6.
" This menu item does not appear if the
selected file is a PDF file.
Settings
DUPLEX:
LONG EDGE/SHORT EDGE/OFF
OFF
Select whether to perform duplex printing.
If LONG EDGE is selected, the page will be printed
on both sides of the paper for long edge binding.
If SHORT EDGE is selected, the page will be
printed on both sides of the paper for short edge
binding.
If OFF is selected, duplex printing is not performed.
COPIES:1 Settings
1-9999
Specify the number of copies to be printed (between
1 and 9999).
66
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
COLLATE Settings
ON/OFF
Select whether to collate the copies.
If ON is selected, collated printing is performed.
If OFF is selected, collated printing is not performed.
" This menu item appears only if the optional
hard disk drive or a CompactFlash card of
1GB or more is installed.
MAIN
TRAY
Settings
SUB TRAY/MAIN TRAY/OFFSET/
STAPLING
Select the output tray and finishing settings.
When SUB TRAY is selected, the paper is fed to
the sub output tray.
When MAIN TRAY is selected, the paper is fed to
the main output tray.
When OFFSET is selected, the paper is fed to the
main output tray with each copy slightly shifted.
When STAPLING is selected, each copy is stapled
and fed to the main output tray.
" This menu item appears only if the optional
staple finisher is installed.
TYPE
OF
FILES
Settings
PDF,JPEG,TIFF/PDF
Select the type of files to be displayed.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
67
CAMERA DIRECT
This menu item appears when INTERFACE MENU/CAMERA DIRECT is
set to ENABLE.
In addition, this menu item does not appear if public user access has not
been permitted through authentication settings. For details on the authentication settings, refer to the bizhub C30P Reference Guide on the Utilities and
Documentation CD-ROM.
With this menu, settings for “camera direct” function can be specified.
"
These settings are overridden by any settings configured within the
digital camera.
For details on camera direct, refer to “Camera Direct” on page 94.
CAMERA DIRECT
PAPER SOURCE
LAYOUT
PAPER MARGIN
IMAGE QUALITY
BRIGHTNESS
CONTRAST
ECONOMY PRINT
GLOSSY MODE
RGB SOURCE
RGB INTENT
RGB GRAY
HALFTONE
68
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
"
All factory default values are shown in bold.
PAPER Settings
TRAY1/TRAY2/TRAY3/TRAY4
SOURCE Select the Lower Feeder Unit that is used for camera direct
printing.
" TRAY3 and TRAY4 appear only if the optional lower
feeder units are installed.
LAYOUT Settings
1-UP/2-UP/3-UP/4-UP/6-UP/8-UP
Specify the number of images printed on a single sheet of media.
When set to 1-UP, only one image will be printed on a single
sheet of media.
PAPER Settings
STANDARD/MINIMUM
MARGIN Select the size of the media margins (area that is not printed in).
If STANDARD is selected, the standard media margin size is
specified.
If MINIMUM is selected, the media margins are reduced.
IMAGE
QUALITY
BRIGHT- Settings
NESS
-15%/-10%/-5%/0%/+5%/+10%/
+15%
The brightness of the printed image can be
adjusted.
CONTRAST Settings
-15%/-10%/-5%/0%/+5%/+10%/
+15%
The contrast of the image can be adjusted.
ECONOMY Settings ON/OFF
PRINT
Select whether to print graphics with a reduced
density by reducing the amount of toner that is used.
If ON is selected, the amount of toner used is
reduced when printing.
If OFF is selected, the amount of toner used is not
reduced when printing.
" If GLOSSY
MODE is set to ON, the amount of
toner used is not reduced when printing, even
if ON was selected for this menu item.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
69
GLOSSY
MODE
Settings
ON/OFF
Select whether to relax the limitations on the amount
of toner used in order to widen the color reproduction range and produce glossy prints.
If ON is selected, glossy prints are produced.
If OFF is selected, glossy prints are not produced.
" If ON is selected, the amount of toner used is
not reduced when printing, even if ECONOMY
PRINT is set to ON.
RGB
SOURCE
Settings
DEVICE COLOR/sRGB
Specify the color space for RGB image data.
If DEVICE COLOR is selected, no color space is
specified.
RGB
INTENT
Settings
VIVID/PHOTOGRAPHIC
Specify the characteristic applied when converting
RGB image data to CMYK data.
If VIVID is selected, a vivid output is produced.
If PHOTOGRAPHIC is selected, a brighter output is
produced.
RGB GRAY Settings
COMPOSITE BLACK/BLACK AND
GRAY/BLACK ONLY
Specify how black and grays are reproduced in RGB
image data.
If COMPOSITE BLACK is selected, black is
reproduced using the CMYK colors.
If BLACK AND GRAY is selected, black and gray
are reproduced using black only.
If BLACK ONLY is selected, black is reproduced
using only black.
70
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
HALFTONE Settings
LINE ART/DETAIL/SMOOTH
Select how halftones are reproduced.
If LINE ART is selected, halftones are reproduced
with high precision.
If DETAIL is selected, halftones are reproduced
with detail.
If SMOOTH is selected, halftones are reproduced
with smoothness.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
71
INTERFACE MENU
With this menu, interface settings can be specified.
"
Restart the printer after changing settings in the ETHERNET menu.
INTERFACE MENU
JOB TIMEOUT
ETHERNET
TCP/IP
ENABLE
MEMORY DIRECT**
IP ADDRESS
CAMERA DIRECT
SUBNET MASK
DEFAULT GATEWAY
DHCP/BOOTP
TELNET
NETWARE
ENABLE
APPLETALK
ENABLE
SPEED/DUPLEX
"
72
** This menu item appears only if the optional hard disk drive or a
CompactFlash card is installed.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
"
All factory default values are shown in bold.
JOB
TIMEOUT
Settings
5 seconds-15 seconds-300 seconds
Specify the timeout interval for a print job being received.
ETHER- TCP/IP
NET
ENABLE Settings
YES/NO
If YES is selected, TCP/IP is enabled.
If NO is selected, TCP/IP is disabled.
Setting
IP
000.000.000.000
ADDRESS Set the IP address for this printer on the
network.
Use the
,
,
specify the value.
, and
keys to
If the IP address is manually specified,
DHCP/BOOTP is automatically set to
OFF.
SUBNET Setting 255.255.000.000
MASK
Specify the subnet mask for the network.
Use the
,
,
specify the value.
, and
keys to
DEFAULT Setting 000.000.000.000
GATEWAY Specify the IP address of the router if one
is on the network. Use the
and
DHCP/
BOOTP
Settings
,
,
,
keys to specify the value.
ON/OFF
Select whether or not the IP address is
automatically acquired.
If ON is selected, the IP address is automatically acquired.
If OFF is selected, the IP address is not
automatically acquired.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
73
TELNET Settings ENABLE/DISABLE
Select whether to enable or disable Telnet transmissions.
When ENABLE is selected, Telnet transmissions are enabled.
When DISABLE is selected, Telnet
transmissions are disabled.
NETWARE ENABLE Settings YES/NO
If YES is selected, NetWare is enabled.
If NO is selected, NetWare is disabled.
APPLE
TALK
ENABLE Settings YES/NO
If YES is selected, AppleTalk is enabled.
If NO is selected, AppleTalk is disabled.
SPEED/
DUPLEX
Settings
AUTO/10BASE FULL/10BASE
HALF/100BASE FULL/100BASE
HALF/1000BASE FULL
Specify the transmission speed for the network and
the transmission method for bi-directional
transmission.
MEMORY Settings
ENABLE/DISABLE
DIRECT Select whether to enable or disable memory direct printing.
If ENABLE is selected, memory direct printing is enabled.
If DISABLE is selected, memory direct printing is disabled.
CAMERA Settings
ENABLE/DISABLE
DIRECT Select whether to enable or disable camera direct printing.
If ENABLE is selected, camera direct printing is enabled.
If DISABLE is selected, camera direct printing is disabled.
74
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
SYS DEFAULT MENU
With this menu, settings can be specified to adjust the operation of the printer,
such as the display language of the message window and the time until the
machine enters Energy Saver mode.
SYS DEFAULT MENU
LANGUAGE
EMULATION
DEF.
EMULATION
POSTSCRIPT
WAIT
TIMEOUT
PS ERROR
PAGE
PS PROTOCOL
PCL
CR/LF
MAPPING
LINES PER
PAGE
FONT SOURCE
FONT NUMBER
PITCH SIZE
(POINT SIZE)
SYMBOL SET
PAPER
DEFAULT
PAPER
PAPER SIZE
UNIT OF
MEASURE
CUSTOM SIZE
PAPER TYPE
GRAYSCALE
PAGE
STARTUP
OPTIONS
DO STARTUP
PAGE
AUTO
CONTINUE
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
75
HOLD JOB
TIMEOUT*
ENERGY
SAVER
ENERGY
SAVER TIME**
MENU
TIMEOUT
LCD
CONTRAST
SECURITY
CHANGE
PASSWORD
LOCK PANEL
CLOCK
DATE
(xx.xx.xx)
TIME
TIME ZONE
HDD FORMAT*
USER AREA
ONLY
ALL
CARD FORMAT***
USER AREA
ONLY
ALL
RESTORE
DEFAULTS
RESTORE
NETWORK
RESTORE
PRINTER
RESTORE ALL
76
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
ENABLE
WARNING
PAPER EMPTY
TRAY1
TONER LOW
TRAY2
I-UNIT LOW
TRAY3****
TRAY4****
"
* These menu items appear only if an optional hard disk drive is
installed.
** This menu item appears when you select except OFF from the
ENERGY SAVER menu.
*** This menu item appears only if an optional CompactFlash card is
installed.
**** These menu items appear only if corresponding optional lower
feeder unit is installed.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
77
"
All factory default values are shown in bold.
LANGUAGE
Settings
ENGLISH/FRENCH/GERMAN/SPANISH/
ITALIAN/PORTUGUESE/CZECH/JAPANESE/
KOREAN/SIMPLIFIED CHINESE/
TRADITIONAL CHINESE/DUTCH
The display language of the message window can be changed
to the selected language.
The language selections appear in the message window in the
corresponding language. For example, GERMAN appears as
DEUTSCH.
Settings AUTO/POSTSCRIPT/PCL
EMULA- DEF.
TION
EMULA- Specify the printer emulation language.
TION
If AUTO is selected, the printer automatically selects
the printer emulation language from the data stream.
POST- WAIT
SCRIPT TIME
OUT
Settings
0-300
Specify the time until an error is
determined to be a PostScript error.
If 0 is selected, no timeout is performed.
PS
ERROR
PAGE
Settings
ON/OFF
Select whether or not an error page is
printed when a Postscript error occurs.
Settings AUTO/NORMAL/BINARY
PS
PROTO- Specify the protocol for data transmissions
COL
with a PostScript data stream.
If AUTO is selected, the printer
automatically selects an applicable
protocol from the data stream.
78
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
PCL
CR/LF
MAPPING
Settings
CR=CR LF=LF/CR=CRLF
LF=LF/CR=CR
LF=LFCR/CR=CRLF
LF=LFCR
Select the definitions of the CR/LF codes
in the PCL language.
LINES
PER
PAGE
Settings
5-60-128
Specify the number of lines per page in the
PCL language.
Settings 0-102
FONT
FONT
SOURCE NUMBER Specify the default font in the
PCL language.
The font numbers that appear
correspond to the PCL font list.
For details on printing the font
list, refer to “PRINT MENU” on
page 37.
PITCH Settings
SIZE
(POINT
SIZE)
0.44-10.0099.99
(4.00-12.00999.75)
Specify the font size in the PCL
language.
If the selected FONT NUMBER
is for a bitmap font, PITCH
SIZE appears. If the selected
FONT NUMBER is for an
outline font, POINT SIZE
appears.
SYMBOL Specify the symbol set used
with the PCL language.
SET
The default setting is PC8.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
79
PAPER
DEFAULT PAPER
PAPER SIZE
Settings
LETTER/LEGAL/EXECUTIVE/A4/A5/A6/
B5(JIS)/B6(JIS)/GOVT
LETTER/STATEMENT/
FOLIO/SP FOLIO/UK
QUARTO/FOOLSCAP/GOVT
LEGAL/16K/PHOTO
10×15/KAI 16/KAI 32/
ENV C5/ENV C6/ENV DL/
ENV MONARCH/ENV
CHOU#3/ENV CHOU#4/
B5(ISO)/ENV #10/ENV
YOU#4/JPOST/JPOST-D/
CUSTOM
Select the size of media that is normally
used.
" Depending on the setting selected
for SYS DEFAULT MENU/
PAPER/UNIT OF MEASURE,
PHOTO 10×15 may change to
PHOTO 4×6.
80
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
CUSTOM Specify the media size when PAPER
SIZE
SIZE is set to CUSTOM.
The setting units can be switched between
millimeters and inches with the SYS
DEFAULT MENU/PAPER/UNIT OF
MEASURE setting.
Setting range for WIDTH
„ For MILLIMETERS: 92 to 216 mm
(default)
– 210 mm
„ For INCHES: 3.63 to 8.50 inches
(default)
– 8.26 inches
Setting range for LENGTH
„ For MILLIMETERS: 148 to 356 mm
(default)
– 297 mm
„ For INCHES: 5.83 to
14.00 inches
(default)
– 11.69 inches
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
81
PAPER
TYPE
Settings
PLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/LABEL/
TRANSPARENCY/
ENVELOPE/POSTCARD/
LETTERHEAD/GLOSSY 1/
GLOSSY 2
Select the type of media that is normally
used.
GRAY
SCALE
PAGE
UNIT
OF
MEASURE
Settings
Settings
AUTO/GRAYSCALE PRINT/COLOR PRINT
INCHES/MILLIMETERS
The units for specifying the size of custom media can
be switched between inches and millimeters.
Specify the operation to be performed for black-and-white
pages in a job specified for color printing.
If AUTO is selected, printing is automatically performed according to the first page of the job.
If GRAYSCALE PRINT is selected, black-and-white printing is
automatically performed depending on each page.
If COLOR PRINT is selected, color printing is performed, even
for a black-and-white page.
Settings ON/OFF
STARTUP DO
OPTIONS START- Select whether or not a startup page is printed when
UP
the printer is turned on.
PAGE
AUTO
CONTINUE
Settings
ON/OFF
Select whether or not printing continues if the size or type of
media in the selected tray is different from the size or type of
media for the print job.
If AUTO CONTINUE is set to ON, printing automatically continues after about 10 seconds under the following conditions. At
this time, printing will be performed even if the media size is different.
No media: PAPER EMPTY (Page 220)/TRAY EMPTY (Page
222)
Different media size/type: PAPER ERROR (Page 220)/TRAY x
PAPER ERR (Page 222)
82
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
HOLD
JOB
TIME
OUT
Settings
DISABLE/1 hour/4 hours/1 day/
1 week
Specify the length of time until print jobs saved on the hard disk
are deleted. If DISABLE is selected, print jobs are not deleted
at a specific time.
ENERGY Settings ON/OFF
SAVER If ON is selected, the machine enters Energy Saver mode
according to the length of time specified for ENERGY SAVER
TIME.
If OFF is selected, the machine will not enter Energy Saver
mode.
ENERGY Settings 5 minutes/15 minutes/30 minutes/
SAVER
1 hour/3 hours
TIME
Specify the length of time until the machine enters Energy
Saver mode.
This menu item appears only when ENERGY SAVER is set to
ON.
MENU
TIME
OUT
Settings
LCD
CONTRAST
Settings
OFF/1 minute/2 minutes
Specify the length of time until the status screen is displayed
when no operation is performed while a menu or help screen is
displayed in the message window. If OFF is selected, no
timeout occurs.
-3/-2/-1/0/+1/+2/+3
Adjust the contrast of the message window.
The darkest level setting is -3 and the brightest level setting is
+3.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
83
SECURITY
CHANGE Specify the password for locking the control panel.
PASSIf the password is set to 0000 (default), the control
WORD
panel is not locked. In order to lock the control panel,
be sure to specify a password other than 0000.
LOCK
PANEL
Settings
OFF/MINIMUM/ON
Specify how the control panel is locked.
If OFF is selected, the control panel is not locked.
If MINIMUM is selected, the INTERFACE MENU
and SYS DEFAULT MENU are protected with a
password.
If ON is selected, all menus are protected with a
password.
In order to lock the control panel, be sure to specify a
password other than 0000.
CLOCK
Specify the date for the printer’s internal clock.
DATE
(xx.xx.
xx)
TIME
Specify the time for the printer’s internal clock.
TIME
ZONE
Settings
HDD
USER
FORMAT AREA
ONLY
ALL
CARD
USER
FORMAT AREA
ONLY
ALL
84
-12:00-00:00-+13:00
Specify the time zone.
Initialize the user area of the hard disk. When this
menu item is selected, the printer is automatically
restarted.
Initialize the hard disk. When this menu item is
selected, the printer is automatically restarted.
Initialize the user area of the compactflash card.
When this menu item is selected, the printer is
automatically restarted.
Initialize the compactflash card. When this menu item
is selected, the printer is automatically restarted.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
RESTORE RESTORE Reset the network settings to their defaults. When
DEFAULTS NETWORK this menu item is selected, the printer is
automatically restarted.
RESTORE Reset the printer settings to their defaults. When this
PRINTER menu item is selected, the printer is automatically
restarted.
RESTORE Reset all settings to their defaults. When this menu
item is selected, the printer is automatically restarted.
ALL
ENABLE PAPER
WARNING EMPTY
TRAY1
Settings
ON/OFF
Select whether or not a warning appears
when Tray 1 runs out of media.
TRAY2
Settings
ON/OFF
Select whether or not a warning appears
when Tray 2 runs out of media.
TRAY3
Settings
ON/OFF
Select whether or not a warning appears
when Tray 3 runs out of media.
TRAY4
Settings
ON/OFF
Select whether or not a warning appears
when Tray 4 runs out of media.
TONER
LOW
Settings
ON/OFF
When set to ON, Toner low message will show up on
the control panel when one or more toner cartridges
reach to the low condition.
I-UNIT Settings ON/OFF
LOW
Select whether or not a warning appears when the
print unit is about to reach the end of its service life.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
85
MAINTENANCE MENU
With this menu, maintenance on this printer can be performed.
In order to use this menu, the administrator password must be entered.
MAINTENANCE MENU
PRINT MENU
EVENT LOG
HALFTONE 64
CYAN/MAGENTA/
YELLOW/BLACK 64
HALFTONE 128
CYAN/MAGENTA/
YELLOW/BLACK 128
HALFTONE 256
CYAN/MAGENTA/
YELLOW/BLACK 256
GRADATION
ALIGNMENT
TOP
ADJUSTMENT
PLAIN PAPER
THICK
ENVELOPE
TRANSPARENCY
LEFT
ADJUSTMENT
LEFT ADJ
TRAY 1-4
LEFT
ADJ DUPLEX
LEFT ADJ
TRAY 1-4
TRANSFER
POWER
SIMPLEX PASS
PLAIN PAPER
TRANSPARENCY
THICK 1
THICK 2
POSTCARD
86
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
ENVELOPE
LABEL
GLOSSY 1
GLOSSY 2
IMG ADJ
THICK
DUPLEX PASS
PLAIN PAPER
MANUAL
DUPLEX
PLAIN PAPER
CYAN
THICK 1
MAGENTA
THICK 2
YELLOW
POSTCARD
BLACK
ENVELOPE
LABEL
IMG ADJ
BLACK
GLOSSY 1
GLOSSY 2
SUPPLIES
REPLACE
TRANS. BELT
TRANS.
ROLLER
FUSER UNIT
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
87
"
All factory default values are shown in bold.
PRINT
MENU
EVENT
LOG
Settings
HALFTONE
64
CYAN/ Settings PRINT/CANCEL
MAGENTA/ Print cyan/magenta/yellow/black halfYELLOW/ tones at 64 gradations.
BLACK
64
HALFTONE
128
CYAN/ Settings PRINT/CANCEL
MAGENTA/ Print cyan/magenta/yellow/black halfYELLOW/ tones at 128 gradations.
BLACK
128
HALFTONE
256
CYAN/ Settings PRINT/CANCEL
MAGENTA/ Print cyan/magenta/yellow/black halfYELLOW/ tones at 256 gradations.
BLACK
256
PRINT/CANCEL
Prints the event log.
GRADA- Settings PRINT/CANCEL
TION
Prints the gradation.
ALIGN- TOP
PLAIN
MENT
ADJUST PAPER
MENT
Settings
THICK
Settings
-15-15
When printing on plain paper, specify the
size of the top margin.
-15-15
When printing on thick paper, specify the
size of the top margin.
ENVELOPE
Settings
-15-15
When printing on envelope, specify the
size of the top margin.
TRANS- Settings -15-15
PARENCY When printing on transparency, specify
the size of the top margin.
88
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
LEFT
LEFT
ADJUST ADJ
MENT
TRAY1
Settings
LEFT
ADJ
TRAY2
Settings
LEFT
ADJ
TRAY3
Settings
LEFT
ADJ
TRAY4
Settings
LEFT
LEFT
ADJ
ADJ
DUPLEX TRAY1
Settings
LEFT
ADJ
TRAY2
Settings
LEFT
ADJ
TRAY3
Settings
LEFT
ADJ
TRAY4
Settings
TRANS- SIMFER
PLEX
POWER PASS
-15-15
When printing on media in Tray 1, specify
the size of the left margin.
-15-15
When printing on media in Tray 2, specify
the size of the left margin.
-15-15
When printing on media in Tray 3, specify
the size of the left margin.
-15-15
When printing on media in Tray 4, specify
the size of the left margin.
-15-15
When duplex printing on media in Tray 1,
specify the size of the left margin.
-15-15
When duplex printing on media in Tray 2,
specify the size of the left margin.
-15-15
When duplex printing on media in Tray 3,
specify the size of the left margin.
-15-15
When duplex printing on media in Tray 4,
specify the size of the left margin.
PLAIN
PAPER
Settings
-8-7
When printing on plain paper
using simplex pass, correct
the secondary image transfer
current.
TRANS- Settings -8-7
PARENCY When printing on transparency
using simplex pass, correct
the secondary image transfer
current.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
89
THICK
1
Settings
THICK
2
Settings
POSTCARD
Settings
-8-7
When printing on thick 1 using
simplex pass, correct the secondary image transfer current.
-8-7
When printing on thick 2 using
simplex pass, correct the secondary image transfer current.
-8-7
When printing on postcard
using simplex pass, correct
the secondary image transfer
current.
ENVELO Settings -8-7
PE
When printing on envelope
using simplex pass, correct
the secondary image transfer
current.
LABEL
Settings
-8-7
When printing on LABEL using
simplex pass, correct the secondary image transfer current.
GLOSSY Settings -8-7
1
When printing on GLOSSY 1
using simplex pass, correct
the secondary image transfer
current.
GLOSSY Settings -8-7
2
When printing on GLOSSY 2
using simplex pass, correct
the secondary image transfer
current.
DUPLEX PLAIN
PASS
PAPER
90
Settings
-8-7
When printing on plain paper
using duplex pass, correct the
secondary image transfer current.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
MANUAL PLAIN
DUPLEX PAPER
Settings
THICK
1
Settings
THICK
2
Settings
POSTCARD
Settings
ENVELOPE
Settings
LABEL
Settings
-8-7
When printing on plain paper
using manual duplex pass,
correct the secondary image
transfer current.
-8-7
When printing on THICK 1
using manual duplex pass,
correct the secondary image
transfer current.
-8-7
When printing on THICK 2
using manual duplex pass,
correct the secondary image
transfer current.
-8-7
When printing on POSTCARD using manual duplex
pass, correct the secondary
image transfer current.
-8-7
When printing on ENVELOPE
using manual duplex pass,
correct the secondary image
transfer current.
-8-7
When printing on LABEL using
manual duplex pass, correct
the secondary image transfer
current.
GLOSSY Settings -8-7
1
When printing on GLOSSY 1
using manual duplex pass,
correct the secondary image
transfer current.
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
91
GLOSSY Settings -8-7
2
When printing on GLOSSY 2
using manual duplex pass,
correct the secondary image
transfer current.
IMG
ADJ
THICK
CYAN
Settings
-5-0-5
When printing on thick paper, adjust the
cyan in the image.
MAGENTA Settings -5-0-5
When printing on thick paper, adjust the
magenta in the image.
YELLOW Settings -5-0-5
When printing on thick paper, adjust the
yellow in the image.
BLACK
Settings
-5-0-5
When printing on thick paper, adjust the
black in the image.
SUPPLIES
IMG
ADJ
BLACK
Settings
REPLACE
TRANS. Settings YES/NO
BELT
Reset the service life counter for the
-2-0-2
When printing in grayscale, adjust the black in the
image.
transfer belt unit.
TRANS. Settings YES/NO
ROLLER Reset the service life counter for the
transfer roller.
FUSER
UNIT
Settings
YES/NO
Reset the service life counter for the
fuser unit.
SERVICE MENU
With this menu, the service representative can adjust the printer and perform
maintenance operations. This menu cannot be used by the user.
92
Configuration Menu Overview
Downloaded From ManualsPrinter.com Manuals
Camera Direct
Downloaded From ManualsPrinter.com Manuals
5
Camera Direct
If a digital camera with PictBridge (1.0 or later) is connected to the printer
through the Camera Direct Print port, images stored on the digital camera can
be printed directly from the printer.
"
"
For details on using the digital camera, refer to your digital cameras
manual.
The following features are not supported with Camera Direct.
- DPOF AUTOPRINT image print
- Cropping print
- Borderless
- Print quality (printer setup)
- Paper type (printer setup)
- DPOF cable disconnect recovery
Printing Directly from a Digital Camera
1
From the printer’s Camera Direct Menu, specify settings for Paper
Source, Layout, Paper Margin and Image Quality.
"
"
2
4
If these settings can be specified from the digital camera, they do
not need to be specified from the control panel. These settings are
overridden by settings configured within the digital camera.
For details on control panel settings, refer to “CAMERA DIRECT”
on page 68.
Connect the USB cable to the digital camera and to the KONICA
MINOLTA Digital Camera Direct
Print Port.
"
3
The Media Type setting that is used is the default printer setting
that is selected.
The Media Type setting cannot be selected from the digital camera.
A USB cable is not
included with the printer
and must be purchased
separatelly, if not supplied
with your digital camera.
From the digital camera, specify
the image that you wish to print and the desired number of copies.
Start printing from the digital camera.
94
Downloaded From ManualsPrinter.com Manuals
Camera Direct
Memory Direct
Downloaded From ManualsPrinter.com Manuals
6
Memory Direct
PDF, JPEG and TIFF files saved on USB memory devices can be printed by
plugging the USB memory device into the printer.
"
"
Memory direct can be used only if the optional hard disk drive or a
CompactFlash card is installed.
In order to perform collated printing with memory direct, the optional
hard disk drive or a CompactFlash card of 1 GB or more must be
installed.
For details on specifying settings with the control panel, refer to “MEMORY DIRECT” on page 65.
Printing From a Connected USB Memory Device
1
2
Plug the USB memory device
into the KONICA MINOLTA Digital Camera Direct Print Port.
The USB icon appears in the
upper-right corner of the message window, and the Memory
Direct menu appears.
Select LIST OF FILES, and then press the Menu/Select key.
"
3
4
When all files (PDF, JPEG and TIFF) are displayed, select Type
OF FILES, and then press the Menu/Select key.
From the file list, select the file that you wish to print, and then press the
Menu/Select key.
If the file to be printed is in a folder, select the folder, and then press the
Menu/Select key.
"
"
A maximum of 99 folders and files can be displayed.
Up to 8 folder levels can be displayed.
Select PRINT, and then press the Menu/Select key.
When printing is finished, the status screen appears again.
"
"
Settings can be specified for the paper size, duplex printing, number of copies, collating, the output tray, and finishing.
Do not unplug the USB memory device from the KONICA
MINOLTA Digital Camera Direct Print Port during memory direct
printing.
96
Downloaded From ManualsPrinter.com Manuals
Memory Direct
Using Media
Downloaded From ManualsPrinter.com Manuals
7
Media Specifications
What types and sizes of media can I load?
Media
Media Size
Inch
Tray*
Duplex
(Double-Sided)
Millimeter
Letter
8.5 x 11.0
215.9 x 279.4
1/2/3/4
Yes
Legal
8.5 x 14.0
215.9 x 355.6
1/3/4
Yes
Statement
5.5 x 8.5
139.7 x 215.9
1
No
Executive
7.25 x 10.5
184.0 x 267.0
1/3/4
Yes
A4
8.2 x 11.7
210.0 x 297.0
1/2/3/4
Yes
A5
5.9 x 8.3
148.0 x 210.0
1
No
A6
4.1 x 5.8
105.0 x 148.0
1
No
B5 (JIS)
7.2 x 10.1
182.0 x 257.0
1/3/4
Yes
B6
5.0 x 7.2
128.0 x 182.0
1
No
Folio
8.3 x 13.0
210.0 x 330.0
1
Yes
Yes
SP Folio
8.5 x 12.7
215.9 x 322.3
1
Foolscap
8.0 x 13.0
203.2 x 330.2
1
Yes
UK Quarto
8.0 x 10.0
203.2 x 254.0
1
No
Government Letter
8.0 x 10.5
203.2 x 266.7
1
Yes
Government Legal
8.5 x 13.0
216.0 x 330.2
1/3/4
Yes
Photo Size 4" x 6"/10 x 15
4.0 x 6.0
100.0 x 150.0
1
No
16 K
7.7 x 10.6
195.0 x 270.0
1
Yes
Kai 16
7.3 x 10.2
185.0 x 260.0
1
Yes
Kai 32
5.1 x 7.3
130.0 x 185.0
1
No
Japanese Postcard
3.9 x 5.8
100.0 x 148.0
1
No
Japanese Postcard-D
5.8 x 7.9
148.0 x 200.0
1
No
B5 (ISO)
6.9 x 9.8
176.0 x 250.0
1
No
Envelope Com10
4.126 x 9.5
104.8 x 241.3
1
No
Envelope DL
4.3 x 8.7
110.0 x 220.0
1
No
Envelope C5
6.4 x 9.0
162.0 x 229.0
1
No
Envelope C6
4.5 x 6.4
114.0 x 162.0
1
No
Envelope Monarch
3.875 x 7.5
98.4 x 190.5
1
No
Envelope Chou #3
4.7 x 9.2
120.0 x 235.0
1
No
Envelope Chou #4
3.5 x 8.1
90.0 x 205.0
1
No
Envelope You #4
4.1 x 9.3
105.0 x 235.0
1
No
Custom, Minimum
3.6 x 5.9
92.0 x 148.0
1
No**
Custom, Maximum
8.5 x 47.2
216.0 x 1200.0
1****
No***
Notes: *
Tray 1= Manual feed tray
Tray 3/4 = Lower feeder units (optional)
** The minimum possible size for duplex (Double-Sided) printing is B5(JIS).
*** The maximum possible size for duplex printing is Legal.
**** Banner paper longer than 355.6 mm (14.0") can only be fed through Tray 1 one sheet
at a time.
98
Downloaded From ManualsPrinter.com Manuals
Media Specifications
"
For custom sizes, use the printer driver to specify the settings within
the ranges shown in the above table.
Media Types
Before purchasing a large quantity of special media, do a trial print
with the same media and check the print quality.
Keep media on a flat, level surface in its original wrapper until it is time to
load it. For a list of approved media, refer to printer.konicaminolta.com.
Plain Paper (Recycled Paper)
Capacity
Tray 1
Up to 100 sheets, depending on the paper
(Manual Feed weight.
Tray)
Tray 2/3/4
Up to 500 sheets, depending on the paper
weight.
Orientation Tray 1
Face down
(Manual Feed
Tray)
Tray 2/3/4
Face up
Driver
Plain Paper (Recycled)
Media Type
Weight
60–90 g/m² (16–24 lb bond)
Duplexing See page 98 for supported sizes.
Glossy
ON/OFF Supported
Mode
Glossy mode is Disabled at Grayscale (Color Mode), or
Duplex Print.
"
Use media that is
Suitable for plain paper laser printers, such as standard or recycled office
paper.
Note
Do not use the media types listed below. These could cause poor print
quality, media misfeeds, or damage to the printer.
DO NOT use media that is
„ Coated with a processed surface (such as carbon paper, and colored
paper that has been treated)
Media Types
Downloaded From ManualsPrinter.com Manuals
99
„ Carbon backed
„ Unapproved iron-on transfer media (such as heat-sensitive paper,
heat-pressure paper, and heat-press transfer paper)
„ Cold-water-transfer paper
„ Pressure sensitive
„ Designed specifically for inkjet printers (such as superfine paper, glossy
paper, glossy film, and postcards)
„ Paper that has already been printed on
– Paper that has been printed on with an inkjet printer
– Paper that has been printed on with a monochrome/color laser printer/
copier
– Paper that has been printed on with a heat-transfer printer
– Paper that has been printed on with any other printer or fax machine
„ Dusty
„ Wet (or damp)
"
Keep media between 35% and 85% relative humidity. Toner does
not adhere well to moist or wet paper.
„ Layered
„ Adhesive
„ Folded, creased, curled, embossed, warped, or wrinkled
„ Perforated, three-hole punched, or torn
„ Too slick, too coarse, or too textured
„ Different in texture (roughness) on the front and back
„ Too thin or too thick
„ Stuck together with static electricity
„ Composed of foil or gilt; too luminous
„ Heat sensitive or cannot withstand the fusing temperature (180°C
[356°F])
„ Irregularly shaped (not rectangular or not cut at right angles)
„ Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
„ Acidic
„ Any other media that is not approved
100
Downloaded From ManualsPrinter.com Manuals
Media Types
Thick Stock
Paper thicker than 90 g/m2 (24 lb bond) is referred to as thick stock. Test all
thick stock to ensure acceptable performance and to ensure that the image
does not shift.
Capacity
Tray 1
Up to 20 thick stock sheets, depending on
(Manual Feed their thickness.
Tray)
Tray 2/3/4
Not supported
Orientation Face down
Driver
Thick 1 (91-150 g/m2)
Media Type Thick 2 (151-210 g/m2)
Weight
91–210 g/m² (25–55.9 lb bond)
Duplexing Not supported
Glossy
ON/OFF Supported
Mode
Glossy mode is Disabled at Grayscale (Color Mode), or
Duplex Print.
"
"
Banner Paper
Weight: 127-160g/m2
Width: 216mm
Length: 357-1200mm
DO NOT use thick stock that is
„ Mixed with any other media in Tray 1 (as this will cause printer misfeeding)
Envelopes
Print on the front (address) side only. Some parts of the envelope consist of
three layers of paper—the front, back, and flap. Anything printed in these layered regions may be lost or faded.
Capacity
Tray 1
Up to 10 envelopes, depending on their
(Manual Feed thickness
Tray)
Tray 2/3/4
Not supported
Orientation Face down
Driver
Envelope
Media Type
Weight
91–163 g/m² (25–43 lb bond)
Media Types
Downloaded From ManualsPrinter.com Manuals
101
Duplexing
Glossy
Mode
Not supported
Not supported
Use envelopes that are
„ Common office envelopes approved for laser printing with diagonal joints,
sharp folds and edges, and ordinary gummed flaps
"
Because the envelopes pass through heated rollers, the gummed
area on the flaps may seal. Using envelopes with emulsion-based
glue avoids this problem.
„ Approved for laser printing
„ Dry
DO NOT use envelopes that have
„ Sticky flaps
„ Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for sealing
„ Transparent windows
„ Too rough of a surface
„ Material that will melt, vaporize, offset, discolor, or emit dangerous fumes
„ Been presealed
Labels
A sheet of labels consists of a face sheet (the printing surface), adhesive, and
a carrier sheet:
„ The face sheet must follow the plain paper specification.
„ The face sheet surface must cover the entire carrier sheet, and no adhesive should come through on the surface.
You can print continuously with label sheets. However, this could affect the
media feed, depending on the media quality and printing environment. If
problems occur, stop the continuous printing and print one sheet at a time.
Try printing your data on a sheet of plain paper first to check placement.
Check your application documentation for more information on printing labels.
Capacity
Tray 1
Up to 20 label sheets, depending on their
(Manual Feed thickness
Tray)
Tray 2/3/4
Not supported
Orientation Face down
102
Downloaded From ManualsPrinter.com Manuals
Media Types
Driver
Media Type
Weight
Duplexing
Glossy
Mode
Label
60–163 g/m² (16–43 lb bond)
Not supported
ON/OFF Supported
" Glossy mode is Disabled at Grayscale (Color Mode), or
Duplex Print.
Use label sheets that are
„ Recommended for laser printers
„ Letter or A4 size (adhesive label stock)
DO NOT use label sheets that
„ Have labels that easily peel off or have parts of the label already removed
„ Have backing sheets that have peeled away or have exposed adhesive
"
Labels may stick to the fuser, causing them to peel off and media
misfeeds to occur.
„ Are precut or perforated
Do not use
Shiny backed paper
OK to use
Full-page labels
(uncut)
Letterhead
Try printing your data on a sheet of plain paper first to check placement.
Capacity
Tray 1
Up to 20 sheets, depending on their size and
(Manual Feed thickness
Tray)
Tray 2/3/4
Not supported
Orientation Face down
Driver
Letterhead
Media Type
Media Types
Downloaded From ManualsPrinter.com Manuals
103
Weight
Duplexing
Glossy
Mode
60–90 g/m² (16–24 lb)
See page 98 for supported sizes.
ON/OFF Supported
" Glossy mode is Disabled at Grayscale (Color Mode), or
Duplex Print.
Postcards
Try printing your data on a sheet of plain paper first to check placement.
Capacity
Tray 1
Up to 20 postcards, depending on their
(Manual Feed thickness
Tray)
Tray 2/3/4
Not supported
Orientation Face down
Driver
Postcard
Media Type
Weight
60–163 g/m² (16–90 lb bond)
Duplexing Not supported
Glossy
ON/OFF Supported
Mode
Glossy mode is Disabled at Grayscale (Color Mode), or
Duplex Print.
"
Use postcards that are
„ Approved for laser printers
DO NOT use postcards that are
„ Coated
„ Designed for inkjet printers
„ Precut or perforated
„ Preprinted or multicolored
"
If the postcard is warped, press on the warped
area before putting it in Tray 1.
104
Downloaded From ManualsPrinter.com Manuals
Media Types
Transparencies
"
"
"
"
Do not fan transparencies before loading them. Resulting static electricity may cause printing errors.
If you touch the face of the transparencies with your bare hands, print
quality may be affected.
Keep the printer path clean. Transparencies are especially sensitive to
a dirty media path. If there are shadows on either the top or the bottom
of the sheets, see chapter 9, “Maintaining the Printer” .
Remove transparencies as soon as possible from the output tray to
avoid static buildup.
You can print continuously with transparencies. However, this could affect the
media feed, depending on the media quality, static buildup, and printing environment.
Try printing your data on a sheet of plain paper first to check placement.
"
If you have problems feeding 20 sheets, try loading only 1–10 sheets
at a time. Loading a large number of transparencies at one time may
cause static buildup, thus causing feeding problems.
Capacity
Tray 1
Up to 20 transparencies, depending on their
(Manual Feed thickness
Tray)
Tray 2/3/4
Not supported
Orientation Face down
Driver
Transparency
Media Type
Duplexing Not supported
Glossy
Not supported
Mode
"
Always first test a small quantity of a particular type of transparency.
Use transparencies that are
„ Approved for laser printing
DO NOT use transparencies that
„ Have static electricity that will cause them to stick together
„ Are specified for inkjet printers only
Media Types
Downloaded From ManualsPrinter.com Manuals
105
Glossy Media
Test all glossy media to ensure acceptable performance and to ensure that
the image does not shift.
Capacity
Tray 1
Up to 20 glossy media sheets, depending on
(Manual Feed their thickness.
Tray)
Tray 2/3/4
Not supported
Orientation Face down
Driver
Glossy 1
Media Type Glossy 2
Weight
Glossy 1 (100–150 g/m²)
Glossy 2 (128–210 g/m²)
Duplexing Not supported
Glossy
ON/OFF Supported
Mode
Glossy mode is Disabled at Grayscale (Color Mode), or
Duplex Print.
"
DO NOT use glossy media stock that is
„ Mixed with any other media in Tray 1 (as this will cause printer misfeeding)
106
Downloaded From ManualsPrinter.com Manuals
Media Types
What Is the Guaranteed Imageable (Printable) Area?
The printable area on all media sizes is
up to 4 mm (0.157") from the edges of
the media.
Each media size has a specific imageable area, the maximum area on which
the printer can print clearly and without
distortion.
a
a
a
Printable
Area
This area is subject to both hardware
a
limits (the physical media size and the
margins required by the printer) and
a = 4 mm (0.157")
software constraints (the amount of
memory available for the full-page frame buffer). The guaranteed imageable
(printable) area for all media sizes is the page size minus 4 mm (0.157") from
all edges of the media.
"
"
When printing on Banner Paper, the bottom margin is 10 mm (0.393").
Banner Paper
Weight: 127-160g/m2
Width: 216mm
Length: 357-1200mm
Imageable Area—Envelopes
Envelopes have a nonguaranteed imageable area that varies with envelope
type.
"
The envelope
print orientation is determined
by your application.
Nonimageable area 4 mm (0.157")
Nonguaranteed area
Guaranteed
area
Page Margins
Margins are set through your application. Some applications allow you to set
custom page sizes and margins while others have only standard page sizes
and margins from which to choose. If you choose a standard format, you may
lose part of your image (due to imageable area constraints). If you can custom-size your page in your application, use those sizes given for the imageable area for optimum results.
Media Types
Downloaded From ManualsPrinter.com Manuals
107
Loading Media
How do I load media?
Take off the top and bottom sheets of a
ream of paper. Holding a stack of approximately 100 sheets at a time, fan the
stack to prevent static buildup before
inserting it in a tray.
"
Do not fan transparencies.
Note
Although this printer was designed for printing on a wide range of
media types, it is not intended to print exclusively on a single media
type except plain paper. Continuous printing on media other than plain
paper (such as envelopes, labels, thick stock, or transparencies) may
adversely affect print quality or reduce engine life.
When refilling media, first remove any media remaining in the tray. Stack it
with the new media, even the edges, then reload it.
Tray 1 (Manual Feed Tray)
For details on the types and sizes of media that can be printed from Tray 1,
refer to “Media Specifications” on page 98.
Loading Plain Paper
1
Open Tray 1.
108
Downloaded From ManualsPrinter.com Manuals
Loading Media
2
3
4
Slide the media guides to provide more space between them.
Press down on the center of the
paper-lifting plate until the left
and right locking tabs (white)
lock into place.
Load the paper face down in the
tray.
Loading Media
Downloaded From ManualsPrinter.com Manuals
109
"
5
6
Do not load paper above
the line. Up to 100 sheets
(80 g/m2 [22 lb]) of plain
paper can be loaded into
the tray at one time.
Slide the media guides against
the edges of the paper.
Select PAPER MENU/PAPER SOURCE/TRAY 1/PAPER SIZE and
PAPER TYPE in the configuration menu, and then select the setting for
the size and type of paper that are loaded. See also “PAPER MENU” on
page 39.
"
When printing from Tray 1 with the corresponding Paper Source setting in the printer driver Tray1 (Manual Feed), it is not necessary to
change the configuration menu setting.
Other Media
When loading media other than plain paper, set the media mode (Envelope,
Label, Thick 1, Thick 2, Glossy 1, Glossy 2, or Transparency) in the driver for
optimum print quality.
110
Downloaded From ManualsPrinter.com Manuals
Loading Media
Loading Envelopes
1
Pull the lever, and then open the
right side cover.
"
2
Before opening the right
side cover, fold up Tray 1.
Open the door at the side of the
right side cover.
Loading Media
Downloaded From ManualsPrinter.com Manuals
111
3
4
Turn the two dials on the fuser
unit to the setting for envelopes.
Plain paper
Envelope
Close the door at the side of the
right side cover.
112
Downloaded From ManualsPrinter.com Manuals
Loading Media
5
Close the right side cover.
6
Open Tray 1.
7
Slide the media guides to provide more space between them.
Loading Media
Downloaded From ManualsPrinter.com Manuals
113
8
9
Press down on the center of the
paper-lifting plate until the left
and right locking tabs (white)
lock into place.
Load the envelopes flap side up
in the tray.
"
"
"
Before loading envelopes, press them down
to make sure that all air is
removed, and make sure
that the folds of the flaps
are firmly pressed; otherwise the envelopes may
become wrinkled or a
media misfeed may
occur.
Up to 10 envelopes can be loaded into the tray at one time.
For envelopes with the
flap along the long edge,
load the envelopes with
the flap toward the right
of Tray 1.
114
Downloaded From ManualsPrinter.com Manuals
Loading Media
10
Slide the media guides against
the edges of the envelopes.
"
11
Before printing on plain
paper, be sure to return
the dials on the fuser unit
to the setting for plain
paper.
Select PAPER MENU/PAPER SOURCE/TRAY 1/PAPER SIZE and
PAPER TYPE in the configuration menu, and then select the setting for
the size and type of paper that are loaded. See also “PAPER MENU” on
page 39.
"
When printing from Tray 1 with the corresponding Paper Source setting in the printer driver Tray1 (Manual Feed), it is not necessary to
change the configuration menu setting.
Loading Label Sheets/Postcards/Thick Stock/Glossy
Media and Transparencies
1
Open Tray 1.
Loading Media
Downloaded From ManualsPrinter.com Manuals
115
2
3
4
Slide the media guides to provide more space between them.
Press down on the center of the
paper-lifting plate until the left
and right locking tabs (white)
lock into place.
Load the media face down in the
tray.
"
Up to 20 sheets can be
loaded into the tray at
one time.
116
Downloaded From ManualsPrinter.com Manuals
Loading Media
5
6
Slide the media guides against
the edges of the media.
Select PAPER MENU/PAPER SOURCE/TRAY 1/PAPER SIZE and
PAPER TYPE in the configuration menu, and then select the setting for
the size and type of paper that are loaded. See also “PAPER MENU” on
page 39.
"
When printing from Tray 1 with the corresponding Paper Source setting in the printer driver Tray1 (Manual Feed), it is not necessary to
change the configuration menu setting.
Loading Media
Downloaded From ManualsPrinter.com Manuals
117
Loading Banner Paper
Paper up to 1200 mm long can be loaded into the bypass tray and printed
one at a time.
1
2
3
Open Tray 1.
Slide the media guides to provide more space between them.
Press down on the center of the
paper-lifting plate until the left
and right locking tabs (white)
lock into place.
118
Downloaded From ManualsPrinter.com Manuals
Loading Media
4
With the side of the banner
paper to be printed on facing
down, insert the end of the paper
as much as possible into the
feed slot.
"
"
5
6
One sheet of banner
paper can be loaded into
the tray at one time.
In order to avoid toner
smudges, do not load
curled paper.
Slide the media guides against
the edges of the banner paper.
Raise the bypass tray, and
secure the banner paper.
Return the bypass tray to its
original position.
Loading Media
Downloaded From ManualsPrinter.com Manuals
119
7
Secure the banner paper with
the left and right media guides.
"
8
When printing multiple
copies on banner paper,
repeat the procedure
starting from step 2.
Select Tray 1(Manual Feed) from the Paper Source list and specify a custom size in the Original Size list of the printer driver, and then print.
120
Downloaded From ManualsPrinter.com Manuals
Loading Media
Tray 2
Loading Plain Paper
1
2
Pull out Tray 2.
Press down the media pressure
plate to lock it into place.
Loading Media
Downloaded From ManualsPrinter.com Manuals
121
3
Load the paper face up in the
tray.
"
4
5
Do not load above the mark. Up to 500 sheets
(80 g/m2 [22 lb]) of plain
paper can be loaded into
the tray at one time.
Close Tray 2.
Select PAPER MENU/PAPER SOURCE/TRAY 2/PAPER SIZE and
PAPER TYPE in the configuration menu, and then select the setting for
the size and type of paper that are loaded. See also “PAPER MENU” on
page 39.
122
Downloaded From ManualsPrinter.com Manuals
Loading Media
Tray 3/4 (Optional Lower Feeder Units)
Loading Plain Paper
1
2
3
Pull out Tray 3 (Tray 4).
Press down the media pressure
plate to lock it into place.
Slide the media guides to provide more space between them.
Loading Media
Downloaded From ManualsPrinter.com Manuals
123
4
Load the paper face up in the
tray.
"
5
Do not load above the mark. Up to 500 sheets
(80 g/m2 [22 lb]) of plain
paper can be loaded into
the tray at one time.
Slide the media guides against
the edges of the paper.
124
Downloaded From ManualsPrinter.com Manuals
Loading Media
6
7
Close Tray 3 (Tray 4).
Select PAPER MENU/PAPER SOURCE/TRAY 3 (or TRAY 4)/
PAPER TYPE in the configuration menu, and then select the setting for
the type of paper that is loaded. See also “PAPER MENU” on page 39.
Loading Media
Downloaded From ManualsPrinter.com Manuals
125
Duplexing
Select paper with high opacity for duplex (Double-Sided) printing. Opacity
refers to how effectively paper blocks out what is written on the opposite side
of the page. If the paper has low opacity (high translucency), then the printed
data from one side of the page will show through to the other side. Check
your application for margin information. For best results, print a small quantity
to make sure the opacity is acceptable.
Duplex (Double-Sided) printing can be done manually or can be done automatically with the duplex option installed and selected.
Note
Only plain paper, 60–90 g/m2 (16–24 lb bond) can be autoduplexed. See
“Media Specifications” on page 98.
Duplexing envelopes, labels, postcards, thick stock, glossy media or
transparencies is not supported.
How do I autoduplex?
You should verify that the duplex option is physically installed on the printer to
successfully duplex (Double-Sided) the job.
Check your application to determine how to set your margins for duplex
(Double-Sided) printing.
The following Binding Position settings are available.
If “Short Edge” is selected, the pages will be laid out to flip
at the top.
11
2
2
11
13
If “Long Edge” is selected, the pages will be laid out to flip
at the side.
13
126
Downloaded From ManualsPrinter.com Manuals
Duplexing
In addition, if “N-up” has been set to “Booklet”, autoduplex printing is performed.
The following Order settings are available when “Booklet” is selected.
If “Left Binding” is selected, the pages can be folded as a
left-bound booklet.
2
1
1
If “Right Binding” is selected, the pages can be folded as a
right-bound booklet.
1
2
3
3
3
1
2
3
1
Load plain paper into the tray.
From the printer driver, specify duplex (Double-Sided) printing (Layout tab
in Windows).
Click OK.
"
With autoduplexing, the back side is printed first, and then the front
side is printed.
Output Tray
All printed media is output to the face-down output tray on top of the printer.
This tray has a capacity of approximately 250 sheets (A4/Letter) of 80 g/m2
(22 lb) paper.
"
"
If the media is stacked too high in the output tray, your printer may
experience media misfeeds, excessive media curl, or static buildup.
Remove transparencies as soon as possible from the output tray to
avoid static buildup.
Output Tray
Downloaded From ManualsPrinter.com Manuals
127
Finishing
When the optional staple finisher is installed, job separation, offset and staple
printing can be performed. For the installation procedure, refer to “Staple Finisher” on page 244. Settings can be specified for job separation, offset and
staple printing by selecting JOB SEPARATION or FINISHING in PAPER
MENU.
"
Use the following paper with job separation, offset and staple printing.
Media Types
Plain paper, Recycled paper and Letterhead
(changes according to the paper thickness)
Media Size
Width: 182 to 216 mm
Length: 257 to 355.6 mm
"
Paper is fed to the main output tray with job separation, offset and staple printing.
Job Separation Printing
When paper is fed to the main output tray, the pages are fed out shifted as
shown below.
"
If staple printing is selected, the pages are stapled together before
being fed out.
2
1
4
3
2
1
3
2
1
"
When paper is fed to the sub output tray, the pages are fed out
stacked on top of each other without begin shifted.
128
Downloaded From ManualsPrinter.com Manuals
Finishing
Offset Printing
If offset printing is selected, the paper is fed out shifted as shown below.
"
When PAPER MENU/COLLATE is set to ON, the pages are fed out
in sets as shown below.
1
1
2
2
3
3
3
2
3
2
1
3
2
1
3
2
1
- When COLLATE is set to OFF
1
- When COLLATE is set to ON
Staple printing
Pages are stapled and fed out by job or by copy set as shown below.
Page in the portrait orientation are stapled in the upper-left corner.
"
"
If staple printing is selected when COLLATE is set to ON, the pages
are stapled before being fed out. If staple printing is selected when
COLLATE is set to OFF, the pages are not stapled before being fed
out (except when only one copy is being printed).
When copies are stapled, they are not fed out shifted as with offset
printing or job separation printing. Instead, they are fed out at the
same position.
1
"
The copies can be stapled when they contain 2 to 30 pages (3 to 60
pages when double-sided).
Finishing
Downloaded From ManualsPrinter.com Manuals
129
Media Storage
How do I store media?
„ Keep media on a flat, level surface in its original wrapper until it is time to
load it.
Media that has been stored for a long time out of its packaging may dry up
too much and cause misfeeding.
„ If media has been removed from its wrapper, place it in its original packaging and store in a cool, dark place on a level surface.
„ Avoid moisture, excessive humidity, direct sunlight, excessive heat (above
35°C [95°F]), and dust.
„ Avoid leaning media against other objects or placing it in an upright position.
Before using stored media, do a trial print to check print quality.
130
Downloaded From ManualsPrinter.com Manuals
Media Storage
Replacing
Consumables
Downloaded From ManualsPrinter.com Manuals
8
Replacing Consumables
Note
Failure to follow instructions as outlined in this manual could result in
voiding your warranty.
Note
If an error message (TONER EMPTY, TRANS.BELT END OF LIFE, etc.)
appears, print out the configuration page, and then check the status of the
other consumables. For details on the error messages, refer to “Error
Messages (Warning:)” on page 215. For details on printing the
configuration page, refer to “Printing a Configuration Page” on page 176.
About Toner Cartridges
Your printer uses four toner cartridges: black, yellow, magenta, and cyan.
Handle the toner cartridges carefully to avoid spilling toner inside the printer
or on yourself.
"
"
Install only new toner cartridges in your printer. If a used toner cartridge is installed, the indicator message will not clear and the supplies
status in the Status Monitor will not be updated.
The toner is nontoxic. If you get toner on your skin, wash it off with
cool water and a mild soap. If you get toner on your clothes, lightly
dust them off as best as you can. If some toner remains on your
clothes, use cool, not hot water, to rinse the toner off.
CAUTION
If you get toner in your eyes, wash it out immediately with cool water
and consult a doctor.
132
Downloaded From ManualsPrinter.com Manuals
Replacing Consumables
Note
Do not use refilled toner cartridges or unapproved toner cartridges. Any
damage to the printer or quality problems caused by a refilled toner
cartridge or an unapproved toner cartridge will void your warranty. No
technical support is provided to recover from these problems.
When replacing a toner cartridge, refer to the following table. For optimum
print quality and performance, use only approved KONICA MINOLTA toner
cartridges for your specific printer type, as listed in the table below. You can
find your printer type and the toner cartridge part numbers on the consumables reorder label inside the front cover your printer.
Printer
Type
EU
Printer Parts
Number
A011 024
"
Toner Cartridge Type
Toner Cartridge
Parts Number
High-Capacity Toner Cartridge -Black (K)
A06V 154
High-Capacity Toner Cartridge -Yellow (Y)
A06V 254
High-Capacity Toner Cartridge -Magenta (M)
A06V 354
High-Capacity Toner Cartridge -Cyan (C)
A06V 454
For optimum print quality and performance, use only the corresponded TYPE genuine KONICA MINOLTA toner cartridges.
Keep toner cartridges:
„ In their packaging until you’re ready to install them.
„ In a cool, dry location away from sunlight (due to heat).
The maximum storage temperature is 35°C (95°F) and the maximum
storage humidity is 85% (noncondensing). If the toner cartridge is moved
from a cold place to a warm, humid place, condensation may occur,
degrading print quality. Allow the toner to adapt to the environment for
about one hour before use.
Replacing Consumables
Downloaded From ManualsPrinter.com Manuals
133
„ Level during handling and storage.
Do not hold, stand or store cartridges on their ends or turn them upside
down; the toner inside the cartridges may become caked or unequally
distributed.
Y
„ Away from salty air and corrosive gases such as aerosols.
134
Downloaded From ManualsPrinter.com Manuals
Replacing Consumables
Replacing a Toner Cartridge
Note
Be careful not to spill toner while replacing a toner cartridge. If toner
spills, immediately wipe it off with a soft, dry cloth.
If TONER LOW on the SYS DEFAULT MENU/ENABLE WARNING is set
to ON, the message TONER LOW X (where “X”. represents the color of the
toner) appears when toner cartridge becomes empty. Follow the steps below
to replace the toner cartridge.
"
If TONER LOW on the SYS DEFAULT MENU/ENABLE WARNING
is set to OFF, you are advised to replace the indicated toner cartridge
when the message TONER EMPTY X appear.
1
Open the printer’s front cover.
2
Pull the front lever to the right.
Y
Replacing Consumables
Downloaded From ManualsPrinter.com Manuals
135
3
Lower the lever to release the
lock.
Y
4
Grab the handle of the toner cartridge to be replaced, and then
pull out the cartridge.
Y
Y
Note
Dispose of the used toner cartridge according to your local regulations.
Do not burn the toner cartridge.
For details, refer to “About Toner Cartridges” on page 132.
5
6
Check the color of the new toner cartridge to be installed.
Remove the toner cartridge from the bag.
136
Downloaded From ManualsPrinter.com Manuals
Replacing Consumables
7
Shake the cartridge to distribute
the toner.
3×
Y
8
Make sure that the toner cartridge is the same color as the
printer compartment, and then
insert the toner cartridge into the
printer.
Y
Y
9
Make sure that the toner cartridge is securely installed, and
then peel off the protective film.
Y
Y
Replacing Consumables
Downloaded From ManualsPrinter.com Manuals
137
10
Raise the front lever to its original position.
Y
11
Pull the lever to the left to lock it
in place.
"
12
The front lever should be
securely returned to its
original position; otherwise, the front cover of
the printer cannot be
closed.
Y
Close the front cover.
138
Downloaded From ManualsPrinter.com Manuals
Replacing Consumables
Replacing a Print Unit
When replacing a print unit, refer to the following table. For optimum print
quality and performance, use only approved KONICA MINOLTA print units for
your specific printer type, as listed in the table below. You can find your printer
type and the print unit part numbers on the consumables reorder label inside
the front cover your printer.
Printer
Type
EU
Printer Parts
Number
A011 024
"
Print Unit Type
Print Unit Parts
Number
Print Unit - Black (K)
A031 00J
Print Unit - Yellow (Y)
A031 05J
Print Unit - Magenta (M)
A031 0AJ
Print Unit - Cyan (C)
A031 0GJ
“I-UNIT” displayed in the control panel refers to the print unit.
Note
Do not touch the OPC drum
surface. This could lower image
quality.
P
U
S
H
Y
If I-UNIT LOW on the SYS DEFAULT MENU/ENABLE WARNING is set
to ON, the message I-UNIT LOW X (where “X”. represents the color of the
toner) appears when a print unit becomes empty. Follow the steps below to
replace the print unit.
"
1
You are advised to replace the indicated print unit when the message
I-UNIT LIFE X appears.
Check the message window to see which color print unit needs replacing.
Replacing Consumables
Downloaded From ManualsPrinter.com Manuals
139
2
Open the printer’s front cover.
3
Pull the front lever to the right.
K
4
Lower the lever to release the
lock.
K
140
Downloaded From ManualsPrinter.com Manuals
Replacing Consumables
5
Press down the area marked
“Push” on the print unit to be
replaced, and then slide the unit
all the way out of the printer.
Note
Dispose of the used print unit according to your local regulations.
Do not burn the print unit.
6
Check the color of the new print unit to be installed.
"
7
In order to prevent toner from spilling, leave the print unit in the
bag until step 5 is being performed.
Remove the print unit from the
bag.
PUSH
K
Replacing Consumables
Downloaded From ManualsPrinter.com Manuals
141
8
SH
"
PU
Hold the print unit with both
hands, and then shake it twice
as shown in the illustration.
Y
Do not grab the bottom of
the bag; otherwise, the
print unit may be damaged, resulting in
decreased print quality.
PUSH
Y
9
Remove all packing tape from
the print unit.
P
U
S
H
K
10
Remove the protective cover
from the print unit. The protective cover slides after having
turned.
P
U
S
H
K
142
Downloaded From ManualsPrinter.com Manuals
Replacing Consumables
11
12
Make sure that the new print unit
to be installed is the same color
as the printer compartment, and
then install the print unit in the
printer.
Raise the front lever to its original position.
K
13
Pull the lever to the left to lock it
in place.
"
The front lever should be
securely returned to its
original position; otherwise, the front cover of
the printer cannot be
closed.
Replacing Consumables
Downloaded From ManualsPrinter.com Manuals
K
143
14
Close the front cover.
144
Downloaded From ManualsPrinter.com Manuals
Replacing Consumables
Replacing the Waste Toner Bottle
When the waste toner bottle becomes full, the message WASTE TONER
FULL/REPLACE BOTTLE appears in the message window. The printer
stops and will not start again until the waste toner bottle is replaced.
1
2
Open the printer’s front cover.
Turn the dial on the waste toner
bottle counterclockwise until it is
in the unlock position.
Lock
Replacing Consumables
Downloaded From ManualsPrinter.com Manuals
Unlock
145
3
4
Open the left and right handles
of the waste toner bottle.
Grab the left and right handles of
the waste toner bottle, and then
slowly pull out the bottle.
"
5
Be careful since some
waste toner may spill if
the lock is closed when
the waste toner bottle is
removed.
Remove the new waste toner bottle from its packaging. Insert the used
waste toner bottle into the plastic bag included in the box, and then box it
up.
Note
Dispose of the used waste toner bottle according to your local
regulations. Do not burn the waste toner bottle.
"
Before installing the waste toner bottle, be sure that the dial on the
waste toner bottle is unlocked.
146
Downloaded From ManualsPrinter.com Manuals
Replacing Consumables
6
7
Slide the waste toner bottle all
the way into the printer.
Turn the dial clockwise until the
waste toner bottle is in the
locked position.
Unlock
Replacing Consumables
Downloaded From ManualsPrinter.com Manuals
Lock
147
8
Close the front cover.
"
If the waste toner bottle is
not fully inserted or if the dial is not locked, the front cover cannot
be closed.
Replacing the Transfer Roller
When the time to replace the transfer roller is reached, the message
TRANS.ROLLER/END OF LIFE appears. Printing can continue even
after this message appears; however, since the print quality is reduced, the
transfer roller should be replaced immediately.
When replacing the transfer roller, also replace the ozone filter. A new ozone
filter is included with the new transfer roller.
Replacing the Transfer Roller
1
Pull the lever, and then open the
right side cover.
"
Before opening the right
side cover, fold up Tray 1.
148
Downloaded From ManualsPrinter.com Manuals
Replacing Consumables
2
3
4
5
While pushing the levers to the
inside, move the roller presser
toward you.
While continuing to press the
levers, remove the transfer
roller.
Prepare a new transfer roller.
While pressing the levers, insert
the shaft of the transfer roller
into the bearings.
Replacing Consumables
Downloaded From ManualsPrinter.com Manuals
149
6
7
8
9
Move the levers away from you
until it snaps into place.
Close the right side cover.
Reset the counter in the MAINTENANCE MENU/SUPPLIES/
REPLACE/TRANS. ROLLER menu.
Replace the ozone filter, using the following procedure.
150
Downloaded From ManualsPrinter.com Manuals
Replacing Consumables
Replacing the Ozone Filter
1
2
Remove the ozone filter from the
printer.
Slide the new ozone filter into
the printer until it snaps into
place.
Replacing Consumables
Downloaded From ManualsPrinter.com Manuals
151
Replacing the Transfer Belt Unit
When the time to replace the transfer belt unit is reached, the message
TRANS. BELT/END OF LIFE appears. Printing can continue even after
this message appears; however, since the print quality is reduced, the transfer belt unit should be replaced immediately.
1
2
Open the printer’s front cover.
Remove the print unit and waste
toner bottle.
"
"
For details on removing
the print unit or waste
toner bottle, refer to
“Replacing a Print Unit”
on page 139 or “Replacing the Waste Toner Bottle” on page 145.
Cover the removed print
unit to protect it from
direct sunlight.
152
Downloaded From ManualsPrinter.com Manuals
Replacing Consumables
3
Using a coin, remove the four
screws on the left side.
"
4
5
Be careful not to lose the
screws.
Remove the left-side cover.
Pull the lever, and then open the
right side cover.
"
Before opening the right
side cover, fold up Tray 1.
Replacing Consumables
Downloaded From ManualsPrinter.com Manuals
153
6
7
Use a coin to loosen the screws
securing the transfer belt unit.
On the left side, pull to the right
the blue shutter lever for the
transfer belt unit.
"
8
Do not remove the blue
lever.
From the side where the left side
cover was removed, hold the
arm, and then carefully pull out
the transfer belt unit.
154
Downloaded From ManualsPrinter.com Manuals
Replacing Consumables
9
10
11
Remove all packing tape from
the transfer belt unit.
Remove the protective cover
from the transfer belt unit.
Prepare a new transfer belt unit.
"
"
12
Be careful not to touch
the surface of the belt.
Do not remove the blue
lever.
Insert the new transfer belt unit
along the rails.
Replacing Consumables
Downloaded From ManualsPrinter.com Manuals
155
13
14
15
On the left side, pull to the left
the blue shutter lever for the
transfer belt unit.
From the right side cover side,
tighten the screws to secure the
transfer belt unit and then close
the right side cover.
Close the right side cover.
156
Downloaded From ManualsPrinter.com Manuals
Replacing Consumables
16
17
18
Attach the left-side cover.
Tighten the four screws on the
left side.
Install the print unit and waste
toner bottle.
"
For details on installing
the print unit or waste
toner bottle, refer to
“Replacing a Print Unit”
on page 139 or “Replacing the Waste Toner Bottle” on page 145.
Replacing Consumables
Downloaded From ManualsPrinter.com Manuals
157
19
20
Close the front cover.
Reset the counter in the MAINTENANCE MENU/SUPPLIES/
REPLACE/TRANS. BELT menu.
Replacing the Backup Battery
If the backup battery is dead, the printer’s date and time cannot be retained.
Follow the procedure described below to replace the backup battery.
Note
It’s very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 226. In addition,
always handle circuit boards by the edges only.
1
Turn off the printer and disconnect the power cord and interface cables.
158
Downloaded From ManualsPrinter.com Manuals
Replacing Consumables
2
3
4
Using a screwdriver, remove the
screw. Then, slide the rear cover
to the right and remove it.
Using a screwdriver, loosen the
seven screws. (Do not remove
them from the printer.)
Slide the panel slightly to the
right and lift it off the printer.
Replacing Consumables
Downloaded From ManualsPrinter.com Manuals
159
5
6
Remove the hook, and then
remove the backup battery.
Insert a new backup battery.
"
7
8
9
10
When inserting the new
backup battery, be sure
that the + side faces
toward the left.
Reinstall the panel and tighten
the seven screws.
Attach the rear cover.
Reconnect all interface cables.
Reconnect the power cord, and
turn on the printer.
160
Downloaded From ManualsPrinter.com Manuals
Replacing Consumables
11
Use DATE on the SYS DEFAULT MENU/CLOCK menu to set the date,
and use TIME on the SYS DEFAULT MENU/CLOCK menu to set the
time.
Replacing the Staple
When there are no more staples, the message STAPLER EMPTY appears.
Replace the staple cartridge.
1
Open the stapler cover.
2
Pull out the stapling unit.
Replacing Consumables
Downloaded From ManualsPrinter.com Manuals
161
3
4
Pull out the stapler.
Remove the empty cartridge,
and then insert the new one.
162
Downloaded From ManualsPrinter.com Manuals
Replacing Consumables
5
Install the stapler.
6
Install the stapling unit.
7
Close the stapler cover.
Replacing Consumables
Downloaded From ManualsPrinter.com Manuals
163
Downloaded From ManualsPrinter.com Manuals
Maintaining the
Printer
Downloaded From ManualsPrinter.com Manuals
9
Maintaining the Printer
CAUTION
Read all caution and warning labels carefully, making sure to follow any
instructions contained in them. These labels are located on the inside of
the printer’s covers and the interior of the printer body.
Handle the printer with care to preserve its life. Abuse handling may cause
damage and void your warranty. If dust and paper scraps remain on the
inside or outside of the printer, printer performance and print quality will suffer,
so the printer should be cleaned periodically. Keep the following guidelines in
mind.
WARNING!
Turn off the printer, unplug the power cord, and disconnect all interface
cables before cleaning. Do not spill water or detergent into the printer;
otherwise the printer will be damaged and an electric shock may occur.
CAUTION
The fuser unit is hot. When the right side cover is opened, the
fuser unit temperature drops gradually (one hour wait time).
„ Be careful when cleaning the inside of the printer or removing media misfeeds, as the fuser unit and other internal parts may be very hot.
„ Do not place anything on top of the printer.
„ Use a soft cloth to clean the printer.
„ Never spray cleaning solutions directly on the printer’s surface; the spray
could penetrate through the air vents of the printer and damage the internal circuits.
„ Avoid using abrasive or corrosive solutions or solutions that contain solvents (such as alcohol and benzene) to clean the printer.
„ Always test any cleaning solution (such as mild detergent) on a small
inconspicuous area of your printer to check the solution’s performance.
„ Never use sharp or rough implements, such as wire or plastic cleaning
pads.
„ Always close the printer’s covers gently. Never subject the printer to vibration.
„ Do not cover the printer immediately after using it. Turn it off and wait until
it cools down.
166
Downloaded From ManualsPrinter.com Manuals
Maintaining the Printer
„ Do not leave the printer’s covers open for any length of time, especially in
well-lit places; light may damage the toner cartridges.
„ Do not open the printer during printing.
„ Do not tap media stacks on the printer.
„ Do not lubricate or disassemble the printer.
„ Do not tilt the printer.
„ Do not touch the electrical contacts, gears, or laser devices. Doing so
may damage the printer and cause the print quality to deteriorate.
„ Keep media in the output tray at a minimum level. If the media is stocked
too high, your printer may experience media misfeeds and excessive
media curl.
„ Make sure two people are available to lift the printer when moving it.
Keep the printer level to avoid
toner spillage.
44 kg
97 lbs
„ When lifting the printer, fold up
Tray 1, and then lift the printer as
shown in the illustration at the
right.
Even if an optional lower feeder
unit is installed, be sure to lift the
printer as shown below. Do not
grasp the grip of Tray 3, Tray 4
or the right side cover; otherwise, the lower feeder unit may
be damaged.
Maintaining the Printer
Downloaded From ManualsPrinter.com Manuals
Front
167
„ If you get toner on your skin, wash it off with cool water and a mild soap.
CAUTION
If you get toner in your eyes, wash it out immediately with cool water
and consult a doctor.
„ Make sure any parts removed during cleaning are replaced before you
plug in the printer.
Cleaning the Printer
CAUTION
Be sure to turn off the printer and unplug the power cord before
cleaning.
Exterior
Control Panel
MENU
Ventilation Grill
YMCK
Printer Exterior
168
Downloaded From ManualsPrinter.com Manuals
Cleaning the Printer
Media Rollers
The accumulation of paper dust and other debris on the media rollers can
cause media-feeding problems.
Cleaning the Media Feed Rollers (Manual Feed Tray)
1
2
Open Tray 1.
Press down on the center of the
paper-lifting plate until the left
and right locking tabs (white)
lock into place.
Cleaning the Printer
Downloaded From ManualsPrinter.com Manuals
169
3
4
Clean the media feed rollers by
wiping them with a soft, dry
cloth.
Close the tray.
170
Downloaded From ManualsPrinter.com Manuals
Cleaning the Printer
Cleaning the Media Feed Rollers (Tray 2/3/4)
1
2
3
Pull out the tray.
Clean the media feed rollers by
wiping them with a soft, dry
cloth.
Close the tray.
Cleaning the Printer
Downloaded From ManualsPrinter.com Manuals
171
Cleaning the Duplex Option Feed Rollers
1
2
3
Open the duplex cover.
Clean the feed rollers by wiping
them with a soft, dry cloth.
Close the duplex cover.
172
Downloaded From ManualsPrinter.com Manuals
Cleaning the Printer
Cleaning the Media Transfer Rollers for Tray 3 and 4
1
Open the right side cover of
Tray 3 (Tray 4).
"
2
3
Before opening the right
side cover of Tray 3
(Tray 4), fold up Tray 1.
Clean the media transfer rollers
by wiping them with a soft, dry
cloth.
Close the right side cover of
Tray 3 (Tray 4).
Cleaning the Printer
Downloaded From ManualsPrinter.com Manuals
173
Cleaning the Laser Lens
This printer is constructed with four laser lenses. Clean all lenses as
described below. The laser lens cleaning tool should be attached to the inside
of the front cover.
1
2
3
Open the printer’s front cover
and remove the cleaning tool
from the machine’s front cover.
Insert the laser lens cleaning
tool into the laser lens cleaning
opening, pull it out, and then
repeat this back and forth movement 2 or 3 times.
Clean between each of the laser
lenses in the same way.
"
4
5
The laser lens cleaning tool
is included with the printer.
Safely store the laser lens
cleaning tool so that it will not
be lost.
Return the laser lens cleaning tool to its holder on the inside of the front
cover.
Close the front cover.
174
Downloaded From ManualsPrinter.com Manuals
Cleaning the Printer
Troubleshooting
Downloaded From ManualsPrinter.com Manuals
10
Introduction
This chapter provides information to aid you in resolving printer problems you
may encounter, or at least guide you to the proper sources for help.
Printing the configuration page
Page 176
Preventing media misfeeds
Page 177
Understanding the media path
Page 178
Clearing media misfeeds
Page 179
Solving problems with media misfeeds
Page 199
Solving other problems
Page 202
Solving problems with printing quality
Page 208
Status, error, and service messages
Page 214
Printing a Configuration Page
Print a configuration page to verify the printer is printing correctly, or to check
the printer configuration.
Press Key
(once)
Until Display Reads
READY
PRINT MENU
If the hard disk drive is installed, the PROOF/PRINT MENU
appears at the top of the menu. Press the
the PRINT MENU.
key to select
CONFIGRATION PG
PRINT
The configuration page prints and the printer goes back
to READY.
176
Downloaded From ManualsPrinter.com Manuals
Introduction
Preventing Media Misfeeds
Make sure that...
Media matches the printer specifications.
Media is flat, especially on the leading edge.
The printer is on a hard, flat, level surface.
You store media in a dry location away from moisture and humidity.
You remove transparencies from the output tray immediately after printing to
avoid static buildup.
You always adjust the media guides in the tray after inserting the media (a
guide that is not properly adjusted can cause poor print quality, media misfeeds, and printer damage).
You load the media printing-side up in the tray (many manufacturers place an
arrow on the end of the wrapper to indicate the printing side).
Avoid...
Media that is folded, wrinkled, or excessively curled.
Double feeding (remove the media and fan the sheets—they may be sticking
together).
Fanning transparencies since this causes static.
Loading more than one type/size/weight of media in a tray at the same time.
Overfilling the trays.
Allowing the output tray to overfill (the output tray has a 250-sheet capacity—
misfeeding may occur if you allow more than 250 sheets of media to accumulate at one time).
Allowing the output tray to fill with more than a few transparencies.
Preventing Media Misfeeds
Downloaded From ManualsPrinter.com Manuals
177
Understanding the Media Path
Understanding the printer’s media path will help you locate media misfeeds
14 15
13
1
2
3
4
12
11
10
9
8
7
5
6
178
1
Toner cartridge
9
Laser
2
Relay unit
10 Print unit
3
Fuser unit
11 Transfer belt unit
4
Duplex option
12 Main output tray
5
Tray 1 (Manual feed tray)
13 Sub output tray
6
Tray 4 (optional)
14 Staple Finisher (optional)
7
Tray 3 (optional)
15 Staple
8
Tray 2
Understanding the Media Path
Downloaded From ManualsPrinter.com Manuals
Clearing Media Misfeeds
To avoid damage, always remove misfed media gently, without tearing it. Any
piece of media left in the printer, whether large or small, can obstruct the
media path and cause further misfeeds. Do not reload media that has misfed.
Note
The image is not fixed on the media before the fusing process. If you
touch the printed surface, the toner may stick to your hands, so be
careful not to touch the printed face when removing the misfed media.
Make sure not to spill any toner inside the printer.
CAUTION
Unfused toner can dirty your hands, clothes, or anything else it gets on.
If you accidentally get toner on your clothes, lightly dust them off as
best as you can. If some toner remains on your clothes, use cool, not
hot water, to rinse the toner off. If toner gets on your skin, wash it off
with cool water and a mild soap.
CAUTION
If you get toner in your eyes, wash it out immediately with cool water
and consult a doctor.
If, after clearing the media misfeed, the misfeed message in the control panel
window persists, open and close the printer’s covers. This should clear the
misfeed message.
Clearing Media Misfeeds
Downloaded From ManualsPrinter.com Manuals
179
Media Misfeed Messages and Clearing Procedures
Media Misfeed Message
Page Reference
PAPER JAM
TRAY 2
Page 181
PAPER JAM
TRAY 3
Page 185
PAPER JAM
TRAY 4
Page 185
PAPER JAM
DUPLEX 1
Page 187
PAPER JAM
DUPLEX 2
Page 187
PAPER JAM
FUSER/EXIT
Page 188
PAPER JAM
TRAY 1
Page 191
PAPER JAM
SECOND TRANS
Page 191
PAPER JAM
VERTICAL TRANS
Page 185, Page 191
PAPER JAM
UPPER TRANS
Page 193
PAPER JAM
FINISHER
Page 194
PAPER JAM
SUB EXIT
Page 195
PAPER JAM
MAIN EXIT
Page 196
PAPER JAM
STAPLER
Page 197
"
If the message PAPER JAM/VERTICAL TRANS appears, check
for media misfeeds in the transfer roller section of the right side covers
for Tray 3 and/or Tray 4.
180
Downloaded From ManualsPrinter.com Manuals
Clearing Media Misfeeds
Clearing a Media Misfeed in Tray 2
1
Pull the lever, and then open the
right side cover.
"
2
Before opening the right
side cover, fold up Tray 1.
Carefully pull out the misfed
media.
Clearing Media Misfeeds
Downloaded From ManualsPrinter.com Manuals
181
CAUTION
The area around the fuser unit is
extremely hot.
Touching anything other than the
indicated levers and dials may
result in burns. If you get burned,
immediately cool the skin under
cold water, and then seek
professional medical attention.
Note
Decreased print quality may
result if the surface of the image
transfer belt or the transfer roller
is touched.
Be careful not to touch the
surface of the image transfer belt
or transfer roller.
182
Downloaded From ManualsPrinter.com Manuals
Clearing Media Misfeeds
3
4
5
Close the right side cover.
Pull out Tray 2, and then remove
all media from the tray.
Fan the media you removed and
then align it well.
Clearing Media Misfeeds
Downloaded From ManualsPrinter.com Manuals
183
6
7
Load the media face up in Tray 2.
"
"
Make sure that the media is flat.
Do not load paper above the mark.
Close Tray 2.
184
Downloaded From ManualsPrinter.com Manuals
Clearing Media Misfeeds
Clearing a Media Misfeed in Tray 3/4
1
Open the right side cover of
Tray 3 (Tray 4).
"
2
3
Before opening the right
side cover of Tray 3
(Tray 4), fold up Tray 1.
Carefully pull out the misfed
media.
Close the right side cover of
Tray 3 (Tray 4).
Clearing Media Misfeeds
Downloaded From ManualsPrinter.com Manuals
185
4
5
6
7
Pull out Tray 3 (Tray 4), and then
remove all paper from the tray.
Fan the paper you removed and
then align it well.
Load the paper face up in Tray 3 (Tray 4).
"
"
"
Make sure that the paper is flat.
Do not load paper above the mark.
Slide the media guides against the edges of the paper.
Close Tray 3 (Tray 4).
186
Downloaded From ManualsPrinter.com Manuals
Clearing Media Misfeeds
Clearing a Media Misfeed from the Duplex Option
1
2
3
Open the duplex cover.
Carefully pull out the misfed
media.
Close the duplex cover.
Clearing Media Misfeeds
Downloaded From ManualsPrinter.com Manuals
187
Clearing a Media Misfeed from the Fuser Unit
1
Pull the lever, and then open the
right side cover.
"
2
3
Before opening the right
side cover, fold up Tray 1.
Push up the levers of the fuser
unit cover, and then open the
cover.
Carefully pull out the misfed
media.
188
Downloaded From ManualsPrinter.com Manuals
Clearing Media Misfeeds
CAUTION
The area around the fuser unit is
extremely hot.
Touching anything other than the
indicated levers and dials may
result in burns. If you get burned,
immediately cool the skin under
cold water, and then seek
professional medical attention.
Note
Decreased print quality may
result if the surface of the image
transfer belt or the transfer roller
is touched.
Be careful not to touch the
surface of the image transfer belt
or transfer roller.
Clearing Media Misfeeds
Downloaded From ManualsPrinter.com Manuals
189
4
Push down the levers.
5
Close the right side cover.
190
Downloaded From ManualsPrinter.com Manuals
Clearing Media Misfeeds
Clearing a Media Misfeed from Tray 1 (Manual Feed Tray)
and Transfer Roller
1
Pull the lever, and then open the
right side cover.
"
2
Before opening the right
side cover, fold up Tray 1.
Carefully pull out the misfed
media.
Clearing Media Misfeeds
Downloaded From ManualsPrinter.com Manuals
191
CAUTION
The area around the fuser unit is
extremely hot.
Touching anything other than the
indicated levers and dials may
result in burns. If you get burned,
immediately cool the skin under
cold water, and then seek
professional medical attention.
Note
Decreased print quality may
result if the surface of the image
transfer belt or the transfer roller
is touched.
Be careful not to touch the
surface of the image transfer belt
or transfer roller.
192
Downloaded From ManualsPrinter.com Manuals
Clearing Media Misfeeds
3
Close the right side cover.
Relay Unit
1
2
Open the upper cover.
Carefully pull out the misfed
media.
Clearing Media Misfeeds
Downloaded From ManualsPrinter.com Manuals
193
Staple Finisher (Case 1)
If the media misfeed occurred between the relay unit and the top of the staple
finisher, follow the procedure described below to remove the misfed media.
1
2
Open the finisher cover.
Carefully pull out the misfed
media.
194
Downloaded From ManualsPrinter.com Manuals
Clearing Media Misfeeds
Staple Finisher (Case 2)
If the media can be seen from the sub output tray, follow the procedure
described below to remove the misfed media.
1
2
Open the finisher cover.
Carefully pull out the misfed
media.
Clearing Media Misfeeds
Downloaded From ManualsPrinter.com Manuals
195
Staple Finisher (Case 3)
If the media misfeed occurred in the center section of the staple finisher, follow the procedure described below to remove the misfed media.
1
2
3
Open the finisher cover.
Clockwise turn the knob on the
inside until the media is fed into
the main output tray.
When the media is fed into the
main output tray, lift up the sub
output tray, and then slowly pull
out the media.
196
Downloaded From ManualsPrinter.com Manuals
Clearing Media Misfeeds
Clearing Jammed Staples
If the staples are jammed, follow the procedure described below to remove
the jammed staples.
1
Open the stapler cover.
2
Pull out the stapling unit.
3
Pull out the stapler.
Clearing Media Misfeeds
Downloaded From ManualsPrinter.com Manuals
197
4
5
Push up the guide for the staple
cartridge, and then remove any
jammed staples.
Return the guide to its original
position, and then install the stapler.
6
Install the stapling unit.
7
Close the stapler cover.
198
Downloaded From ManualsPrinter.com Manuals
Clearing Media Misfeeds
Solving Problems with Media Misfeeds
"
Frequent misfeeds in any area indicate that area should be checked,
repaired, or cleaned. Repeated misfeeds may also happen if you’re
using unsupported print media.
Symptom
Cause
Solution
Several
sheets go
through the
printer
together.
The front edges of
the media are not
even.
Remove the media and even up the
front edges, then reload it.
The media is moist
from humidity.
Remove the moist media and replace it
with new, dry media.
Too much static elec- Do not fan transparencies.
tricity is present.
Media misfeed message stays
on.
Right side cover
needs to be opened
and closed again to
reset the printer.
Open and close the right side cover of
the printer again.
Some media remains Recheck the media path and make
misfed in the printer. sure that you have removed all of the
misfed media.
Duplex
option misfeeds.
Unsupported media
(wrong size, thickness, type, etc.) is
being used.
Use KONICA MINOLTA-approved
media. See “Media Specifications” on
page 98.
Only plain paper, 60–90 g/m2 (16–24
lb) can be autoduplexed. See “Media
Specifications” on page 98.
Make sure that you have not mixed
media types in Tray 1.
Do not duplex (Double-Sided) envelopes, labels, thick stock, glossy, or
transparencies.
Media is still being
misfed.
Recheck the media path inside the
duplex option and make sure that you
have removed all of the misfed media.
Solving Problems with Media Misfeeds
Downloaded From ManualsPrinter.com Manuals
199
Symptom
Cause
Solution
Media is
misfeeding.
The media is not cor- Remove the misfed media and reposirectly positioned in
tion the media properly in the tray.
the tray.
The number of sheets Remove the excess media and reload
in the tray exceeds
the correct number of sheets in the
the maximum
tray.
allowed.
The media guides are Adjust the media guides in the tray to
not correctly adjusted match the size of the media.
to the media size.
Warped or wrinkled
Remove the media, smooth it out, and
media is loaded in the reload it. If it still misfeeds, do not use
tray.
that media.
The media is moist
from humidity.
Remove the moist media and replace it
with new, dry media.
Custom-sized media, Special media must be loaded in
envelopes, labels,
Tray 1 only.
postcards, thick
stock, glossy, or
transparencies are
loaded in Tray 2, 3 or
4.
The recommended
Load the transparencies or label
transparency or label sheets according to the manufacturer’s
sheet is facing the
instructions.
wrong way in Tray 1.
Envelopes are facing Load the envelopes in Tray 1 so the
the wrong way in
flaps are facing up.
Tray 1.
If the flaps are on the long edge, load
the envelopes with the flaps toward the
right of the printer.
200
Solving Problems with Media Misfeeds
Downloaded From ManualsPrinter.com Manuals
Symptom
Cause
Solution
Media is
misfeeding.
Transparencies have Remove the transparencies and load
collected static elec- them in the tray one sheet at a time.
tricity in the tray.
Do not fan transparencies before loading them.
Unsupported media
(wrong size, thickness, type, etc.) is
being used.
Use KONICA MINOLTA-approved
media.
The media roller is
dirty.
Clean the media supply roller.
See “Media Specifications” on page
98.
For more details, refer to “Media Rollers” on page 169.
Solving Problems with Media Misfeeds
Downloaded From ManualsPrinter.com Manuals
201
Solving Other Problems
Symptom
Cause
Solution
Printer
The power cord is not Turn off the printer, confirm that the
power is not correctly plugged into power cord is correctly plugged into the
on.
the outlet.
outlet, and then turn on the printer.
Something is wrong Plug another electrical appliance into
with the outlet conthe outlet and see whether it operates
nected to the printer. properly.
The power switch is
not correctly turned
on (I position).
Turn the power switch off (O position),
then turn it back to the on (I position).
The printer is conUse a power source with the specificanected to an outlet
tions listed in appendix A, “Technical
with a voltage or fre- Specifications.”
quency that does not
match the printer
specifications.
Data was
sent to the
printer, but it
doesn’t print.
An error message is Handle according to the message disdisplayed in the mes- played.
sage window.
The control
panel displays
One of the cartridges Remove the toner cartridges and check
may be defective.
them for damage. If one is damaged,
replace it.
TONER
LOW much
You printed with
heavy toner coverage.
sooner than
expected.
A job may be cancelled if user authentication or account
track settings are
specified.
Click the User Authentication/Account
Track button in the printer driver, and
then type in the necessary information
before printing.
See the specifications in Appendix A.
202
Downloaded From ManualsPrinter.com Manuals
Solving Other Problems
Symptom
Cause
You can’t
The tray is empty.
print the configuration
The printer’s covers
page.
aren’t closed
securely.
There is a media
misfeed.
Solution
Check that at least Tray 1 is loaded
with media, in place, and secure.
Make sure the covers are closed
securely. Close all covers gently to
avoid jarring the printer. Make sure the
waste toner bottle and toner cartridges
are installed correctly.
Clear the media misfeed.
Set the digital camera transfer mode to
Images can- The digital camera
not be
transfer mode is not PictBridge.
printed from set to PictBridge.
the digital
camera.
Printer only
supports a
PictBridge
compliant
digital camera.
"
CAMERA DIRECT Change the setting for INTERFACE
for the printer is set to MENU/CAMERA DIRECT to
DISABLE.
ENABLE.
A public user is not
specified for user
authentication.
Contact the printer administrator.
Only files with the format (extension)
Printing from The file format (file
a USB mem- extension) is not one for JPEG, TIFF or PDF can be printed.
ory device is that can be printed.
not possible.
MEMORY DIRECT Change the setting for INTERFACE
for the printer is set to MENU/MEMORY DIRECT to
DISABLE.
ENABLE.
A public user is not
specified for user
authentication.
Solving Other Problems
Downloaded From ManualsPrinter.com Manuals
Contact the printer administrator.
203
Symptom
Cause
Solution
Printing
takes too
much time.
The printer is set to a
slow printing mode
(for example, thick
stock or transparency).
It takes more time to print on special
media. When using regular paper,
make sure that the media type is set
properly in the driver.
The printer is set to
It takes time for printing to start in
Energy Saver mode. Energy Saver mode. If you do not want
to use this mode, disable it. (SYS
DEFAULT MENU/ENERGY SAVER
menu)
The job is very complex.
Wait. No action needed.
The printer memory is Add more memory.
insufficient.
A toner cartridge for a Install a correct KONICA MINOLTA
different region or an toner cartridge approved for your speunapproved genuine cific printer.
toner cartridge is
installed (INCORRECT TONER X is
displayed in the message window).
Blank pages
come out
during printing.
One or more of the
toner cartridges are
defective or empty.
Check the toner cartridges. The image
will not print if one or more cartridges
are empty.
The wrong media is
being used.
Check that the media type set in the
driver matches the media loaded in the
printer.
204
Downloaded From ManualsPrinter.com Manuals
Solving Other Problems
Symptom
Cause
Not all pages The printer has the
print.
wrong kind of cable,
or the printer is not
configured for the
correct cable and
port.
Solution
Check your cable.
The Cancel key was
pressed.
Make sure no one pressed the Cancel
key while your job was printing.
The tray is empty.
Check that the trays are loaded with
media, in place, and secure.
A document is printed Print the overlay file using a bizhub
with an overlay file
C30P driver.
which has been created by a non-bizhub
C30P driver.
Printer
resets or
turns off frequently.
The power cord is not Turn off the printer, confirm that the
correctly plugged into power cord is correctly plugged into the
the outlet.
outlet, and then turn on the printer.
A system error
occurred.
Solving Other Problems
Downloaded From ManualsPrinter.com Manuals
Contact Technical Support with the
error information.
205
Symptom
Cause
You are
Media or settings are
experiencnot correct.
ing duplex
(DoubleSided) problems.
Solution
For autoduplexing, make sure that you
have a duplex option installed.
Make sure that you are using correct
media.
„ See “Media Specifications” on page
98.
„ Do not duplex (Double-Sided) envelopes, labels, postcards, thick stock,
glossy, or transparencies.
„ Make sure that you have not mixed
media types in Tray 1.
Make sure that your document has
more than one page.
Make sure the duplex option is installed
and declared in the Windows printer
driver (Properties/Configure tab).
In the Windows printer driver (Layout/
Double-Sided), choose “Double-Sided.”
For N-up on duplexed pages, choose
Collate only in the Windows driver’s
Paper Tab. Do not set collation in the
application.
With N-up on Both the driver and
multiple cop- the application have
ies, the out- been set for collation.
put is
incorrect.
For N-up on multiple copies, choose
Collate only in the Windows driver’s
Paper Tab. Do not set collation in the
application.
You hear
unusual
noises.
The printer is not
level.
Place the printer on a flat, hard, level
surface.
The tray is not
installed correctly.
Remove the tray that you are printing
from and reinsert it completely into the
printer.
There is a foreign
object stuck inside
the printer.
Turn off the printer and remove the
object. If you cannot remove it, contact
Technical Support.
206
Downloaded From ManualsPrinter.com Manuals
Solving Other Problems
Symptom
Cause
Solution
The
web-based
utility cannot
be accessed.
The PageScope Web
Connection Administrator’s password is
incorrect.
The PageScope Web Connection
Administrator password has a 6-character minimum and a 16-character
maximum. For details of the PageScope Web Connection administrator
password, refer to the bizhub C30P
Reference Guide on the Utilities and
Documentation CD-ROM.
Media is
wrinkled.
The media is moist
Remove the moist media and replace it
from humidity or hav- with new, dry media.
ing water spilled on it.
The transfer roller or Check them for damage. If necessary,
fuser unit is defective. contact Technical Support with the
error information.
Unsupported media
(wrong size, thickness, type, etc.) is
being used.
Use KONICA MINOLTA-approved
media. See “Media Specifications” on
page 98.
The date and The backup battery
Replace the backup battery. For
time is not
has reached the end details, see “Replacing the Backup Batcorrectly
of its service life.
tery” on page 158.
maintained
on the
printer.
The pages
that were fed
out were not
uniformly
loaded and
the staples
are
incorrectly
positioned.
There are large curls Remove the paper from the paper tray,
in the paper.
turn it over, and then load it again.
There are gaps
between the media
guides of the paper
tray and the sides of
the paper.
Solving Other Problems
Downloaded From ManualsPrinter.com Manuals
Slide the media guides of the paper
tray against the sides of the paper so
that there are no gaps.
207
Solving Problems with Printing Quality
Symptom
Cause
Solution
Nothing is
printed, or
there are
blank spots
on the
printed page.
One or more of the
print units may be
defective.
Remove the print units and check it for
damage. If it is damaged, replace it.
The printer driver is
not set correctly.
Select the proper setting in the printer
driver to switch from transparencies to
plain paper.
The media is moist
from humidity.
Adjust the humidity for media storage.
Remove the moist media and replace it
with new, dry media.
The media set in the
printer driver mismatches the media
loaded in the printer.
Load the correct media in the printer.
The power source
Use a power source with the proper
does not match the
specifications.
printer specifications.
Several sheets are
Remove the media from the tray and
being fed at the same check it for static electricity. Fan plain
time.
paper or other media (but not transparencies), and replace it in the tray.
Media is not set prop- Remove the media, tap it to straighten
erly in the tray(s).
it out, return it to the tray, and realign
the media guides.
Entire sheet One or more of the
is printed in print units may be
black or
defective.
color.
208
Remove the print units and check it for
damage. If it is damaged, replace it.
Solving Problems with Printing Quality
Downloaded From ManualsPrinter.com Manuals
Symptom
Cause
Image is too Laser lens is dirty.
light; there is The media is moist
low image
from humidity.
density.
There is not much
toner left in the cartridge.
One or more of the
print units may be
defective.
Solution
Clean the laser lens.
Remove the moist media and replace it
with new, dry media.
Replace the toner cartridge.
Remove the print units and check them
for damage. If one is damaged,
replace it.
The media type is set When printing envelopes, labels, postincorrectly.
cards, thick stock, glossy, or transparencies, specify the appropriate media
type in the printer driver.
Image is too One or more of the
dark.
print units may be
defective.
Remove the print units and check them
for damage. If one is damaged,
replace it.
Image is
blurred;
background
is lightly
stained;
there is
insufficient
gloss of the
printed
image.
Remove the print units and check them
for damage. If one is damaged,
replace it.
One or more of the
print units may be
defective.
Solving Problems with Printing Quality
Downloaded From ManualsPrinter.com Manuals
209
Symptom
Cause
Solution
The print or One or more of the
Remove the toner cartridges and
color density toner cartridges may check them for damage. If one is damis uneven.
be defective or low.
aged, replace it.
The printer is not
level.
Irregular
The media is moist
print or mot- from humidity.
tled image
appears.
There is
insufficient
fusing or the
image
comes off
when
rubbed.
210
Place the printer on a flat, hard, level
surface.
Adjust the humidity in the media storage area.
Remove the moist media and replace it
with new, dry media.
Unsupported media
(wrong size, thickness, type, etc.) is
being used.
Use KONICA MINOLTA-approved
media. See “Media Specifications” on
page 98.
One or more of the
print units may be
defective.
Remove the print units and check it for
damage. If it is damaged, replace it.
The media is moist
from humidity.
Remove the moist media and replace it
with new, dry media.
Unsupported media
(wrong size, thickness, type, etc.) is
being used.
Use KONICA MINOLTA-approved
media. See “Media Specifications” on
page 98.
Media type is set
incorrectly.
When printing envelopes, labels, postcards, thick stock, glossy, or transparencies, specify the appropriate media
type in the printer driver.
The levers on the
fuser unit are set to
the position for
envelopes.
Before printing on media other than
envelopes, be sure to return the levers
on the fuser unit to the setting for plain
paper.
Solving Problems with Printing Quality
Downloaded From ManualsPrinter.com Manuals
Symptom
Cause
There are
toner
smudges or
residual
images.
One or more of the
Remove the print units and check them
print units may be
for damage. If one is damaged,
defective or installed replace it.
incorrectly.
There are
toner
smudges on
the back side
of the page
(whether or
not it has
been
duplexed).
The media transfer
roller is dirty.
Clean the media transfer roller.
The media path is
dirty with toner.
Print several blank sheets and the
excess toner should disappear.
One or more of the
print units may be
defective.
Remove the print units and check it for
damage. If it is damaged, replace it.
The laser lens is dirty.
Abnormal
areas (white, A print unit may be
black, or
defective.
color) appear
in a regular
pattern.
Solution
If you think the transfer roller should be
replaced, contact Technical Support
with the error information.
Clean the laser lens.
Remove the print unit with the color
causing the abnormal image. Replace
it with a new print unit.
Solving Problems with Printing Quality
Downloaded From ManualsPrinter.com Manuals
211
Symptom
Cause
Image
defects.
The laser lens is dirty. Clean the laser lens.
Lateral lines
or bands
appear on
image.
Colors look
drastically
wrong.
Solution
A toner cartridge may Remove the toner cartridges and
be leaking.
check them for damage. If one is damaged, replace it.
A print unit may be
defective.
Remove the print unit with the color
causing the abnormal image.
Replace it with a new print unit.
The printer is not
level.
Place the printer on a flat, hard, level
surface.
The media path is
dirty with toner.
Print several sheets and the excess
toner should disappear.
One or more of the
print units may be
defective.
Remove the print units and check them
for damage. If one is damaged,
replace it.
One or more of the
print units may be
defective.
Remove the print units and verify that
the toner is distributed evenly on each
cartridge roller, and reinstall the print
units.
One or more of the
Check the control panel for an TONER
toner cartridges may LOW X or TONER EMPTY X mesbe low or empty.
sage. If necessary, replace the specified toner cartridge.
Colors are
not registering properly;
colors are
mixed or
have pageto-page variation.
212
The front cover is not Make sure that the printer’s front cover
properly closed.
is closed.
One or more of the
print units may be
defective.
Remove the print units and check them
for damage. If one is damaged,
replace it.
The media is moist
from humidity.
Remove the moist media and replace it
with new, dry media.
Solving Problems with Printing Quality
Downloaded From ManualsPrinter.com Manuals
Symptom
Cause
The color
One or more of the
has a poor
print units may be
reproduction defective.
or has poor
color density.
Solution
Remove the print units and check them
for damage. If one is damaged,
replace it.
If the problem is not resolved, even after all of the above have been performed, contact Technical Support with the error information.
Solving Problems with Printing Quality
Downloaded From ManualsPrinter.com Manuals
213
Status, Error, and Service Messages
Status, error, and service messages are displayed in the control panel message window. They provide information about your printer and help you locate
many problems. When the condition associated with a displayed message
has changed, the message is cleared from the window.
Standard Status Messages
214
This message...
means...
do this...
CALIBRATING
After replacing a toner car- No action needed.
tridge or a print unit, or after
rebooting your printer after
environmental changes,
your printer automatically
pauses to do an Auto-Image
Density Control (AIDC)
cycle. This process is provided to make reliable
printer operation with optimum output quality possible.
CANCELLING JOB
The job is being cancelled.
COPYING
The printer is printing with
the collating function.
ENERGY SAVER
The printer is in Energy
Saver mode to reduce
power consumption during
periods of inactivity. When a
print job is received, the
printer returns to normal
power within 30 seconds.
FIRMWARE UPDATE
The firmware is being
updated.
INITIALIZING
The printer is being initialized.
PRINTING
The printer is printing.
PROCESSING
The printer is processing
data.
READY
The printer is on and ready
to receive data.
Status, Error, and Service Messages
Downloaded From ManualsPrinter.com Manuals
This message...
means...
do this...
REBOOTING
The printer is being
restarted.
No action needed.
WARMING UP
The printer is warming up.
Error Messages (Warning:
"
)
“I-UNIT” in a message refers to the print unit.
This message...
means...
do this...
FUSER UNIT
END OF LIFE
The fuser unit has
Contact Technical Supreached the end of its port with the error inforlife.
mation.
HDD
NEAR FULL
The hard disk is full.
Delete print jobs saved
on the hard disk.
INCORRECT
HDD
Since the hard disk
drive was formatted
with a different
machine, the hard
disk drive could not
be used.
Replace the hard disk
drive with one
compatible with this
machine, or select HDD
FORMAT from SYS
DEFAULT MENU and
format the hard disk.
INCORRECT
MEMORY CARD
Since the
CompactFlash was
formatted with a
different machine, the
CompactFlash could
not be used.
Replace the
CompactFlash with one
compatible with this
machine, or select
CARD FORMAT from
SYS DEFAULT MENU
and format the
CompactFlash.
INCORRECT
I-UNIT X
The X print unit is an
unapproved type.
INCORRECT
TONER X
The X toner cartridge Install a
is an unapproved
KONICA MINOLTA toner
type.
cartridge of the appropriate type (EU). See page
133.
Status, Error, and Service Messages
Downloaded From ManualsPrinter.com Manuals
Install a KONICA
MINOLTA print unit of
the appropriate type
(EU). See page 139.
215
This message...
means...
do this...
MEMORY CARD
NEAR FULL
The memory card is
nearly full.
Delete resources (fonts,
forms, etc.) which saved
on the memory card by
using Download Manager or PSWC.
NON SUPPORT
CARD
Since incompatible
CompactFlash was
inserted into the
memory slot, the
CompactFlash could
not be used.
Use CompactFlash
compatible with this
printer.
PAPER EMPTY
TRAY X
Tray X (Tray 1, 2, 3 or Load media into the
specified tray.
4) is empty.
(Appears when SYS
DEFAULT MENU/
ENABLE WARNING/PAPER
EMPTY/TRAY X is
set to ON.)
Tray X (Tray 2, 3 or 4) Correctly install the
is not correctly
specified tray.
installed.
(Appears when SYS
DEFAULT MENU/
ENABLE WARNING/PAPER
EMPTY/TRAY X is
set to ON.)
I-UNIT END
X
216
The X Print unit has Replace the Print unit.
reached the end of its
life.
Status, Error, and Service Messages
Downloaded From ManualsPrinter.com Manuals
This message...
means...
do this...
I-UNIT LOW
X
The X print unit is low Prepare the specified
and should be
color print unit.
replaced within 2,000
pages at 5% coverage of letter/A4
pages.
(Appears when SYS
DEFAULT MENU/
ENABLE WARNING/I-UNIT LOW
is set to ON.)
I-UNIT LIFE
X
Replace the print unit.
The X print unit has
reached the end of its
life.
STAPLER EMPTY
The staple finisher
Replace the staple
has run out of staples. cartridge.
Otherwise, the
staples are almost
empty.
TONER EMPTY
X
The X toner cartridge Replace the toner caris empty.
tridge.
Printing does not stop
immediately when this
message appears.
Therefore, if printing is
continued, the Operator
Call message “TONER
EMPTY” appears, and
then printing stops.
(Refer to page 222.)
TONER LOW
X
The X toner cartridge Prepare the specified
is low and should be color toner cartridge.
replaced within 1,200
pages at 5% coverage of letter/A4
pages.
(Appears when SYS
DEFAULT MENU/
ENABLE WARNING/TONER LOW is
set to ON.)
Status, Error, and Service Messages
Downloaded From ManualsPrinter.com Manuals
217
This message...
means...
do this...
TRANS. BELT
END OF LIFE
The transfer belt unit
has reached the end
of its life.
Replace the transfer belt
unit and reset the
counter in the MAINTE-
NANCE MENU/SUPPLIES/REPLACE/
TRANS. BELT menu.
TRANS.ROLLER
END OF LIFE
The transfer roller has Replace the transfer
reached the end of its roller and reset the
life.
counter in the MAINTE-
NANCE MENU/SUPPLIES/REPLACE/
TRANS. ROLLER
menu.
218
UNABLE TO
COLLATE JOB
The hard disk is full. Print one copy of the file
Print jobs over 10,000 at a time.
pages cannot be collated.
UNABLE TO
STAPLE JOB
A job set for stapling
contains pages that
exceed the number of
pages that can be stapled.
Reduce the printed
pages to the number
that can be stapled.
(Refer to page 129.)
WASTE TONER
NEAR FULL
The waste toner bottle is nearly full.
Prepare a new waste
toner bottle.
Status, Error, and Service Messages
Downloaded From ManualsPrinter.com Manuals
Error Messages (Operator Call:
)
This message...
means...
do this...
ADJUST TRAY1
Tray 1 is removed
from the printer.
Install Tray 1
COVER OPEN
DUPLEX COVER
The duplex cover is
open.
Close the duplex cover.
COVER OPEN
FINISHER COVER
The finisher cover is
open.
Close the finisher cover.
COVER OPEN
FRONT COVER
The printer’s front
cover is open.
Close the front cover.
COVER OPEN
SIDE COVER
The printer’s right
side cover is open.
Close the right side
cover.
COVER OPEN
STAPLER COVER
The stapler cover is
open.
Close the stapler cover.
COVER OPEN
TRAYX COVER
The right side cover
of Tray X (Tray 3 or
4) is open.
Close the right side
cover of the tray.
COVER OPEN
UPPER COVER
The upper cover is
open.
Close the upper cover.
FUSER MISSING
CHECK UNIT
The fuser unit is not
installed.
Contact Technical Support with the error information.
HOLD JOB ERROR
UNABLE TO
STORE JOB
The specified print job
saved on the hard
disk is sent while the
hard disk is not
installed.
Print jobs can be saved
only if a hard disk is
installed. If desired,
install a hard disk.
HOLD JOB ERROR
“OPTIONAL”
PRESS CANCEL
When printing a
Change the printer constored job, the printer figuration to that when
configuration was
the job was stored.
changed since the job
was stored.
MANUAL EMPTY
“SIZE”
“MEDIA”
Tray 1 was specified Load the correct media
with the printer driver into Tray 1.
as Manual Feed for
printing, but Tray 1 is
empty.
Status, Error, and Service Messages
Downloaded From ManualsPrinter.com Manuals
219
This message...
means...
MANUAL FEED
“SIZE”
“MEDIA”
The Paper Source in
the printer driver is
set to Tray 1 (Manual
Feed), but there is
already media in the
tray when printing
begins.
MEMORY FULL
PRESS CANCEL
The printer has
received more data
than can be processed with its internal memory.
do this...
Press the
key to
print, or remove and
reload the media in Tray
1.
Press the Cancel key to
cancel the print job.
Decrease the amount of
data to be printed (for
example, by decreasing
the resolution), and then
try printing again.
If that doesn’t solve the
problem, install an
optional memory module.
OUTPUT FULL
REMOVE PAPER
YYYY
The output tray is full Remove all media from
of media.
the output tray.
PAPER EMPTY
“SIZE”
“MEDIA”
The specified tray is
empty. (Appears
when PAPER
Load the correct media
into the specified tray.
MENU/PAPER
SOURCE/TRAY
CHAINING ON is
set.)
PAPER ERROR
“SIZE”
“MEDIA”
The media size/type Load the correct media
size and type.
set in the printer
driver is different from
the size/type of media
loaded (Appears
when PAPER
MENU/PAPER
SOURCE/TRAY
CHAINING ON is
set.)
220
Status, Error, and Service Messages
Downloaded From ManualsPrinter.com Manuals
This message...
means...
PAPER JAM
DUPLEX1
Media has misfed in
the duplex option.
PAPER JAM
DUPLEX2
Media has misfed in
the duplex option.
PAPER JAM
FINISHER
Media has misfed in
the transport section
of the staple finisher.
PAPER JAM
FUSER/EXIT
Media has misfed
leaving the fuser
area.
PAPER JAM
MAIN EXIT
Media has misfed in
the feed section of the
main output tray.
PAPER JAM
SECOND TRANS
Media has misfed in
the transfer roller
area. This type of
misfeed means that
the media did not
make it to the media
exit area.
PAPER JAM
STAPLER
Media has misfed in
the stapler.
PAPER JAM
SUB EXIT
Media has misfed in
the feed section of the
sub output tray.
PAPER JAM
TRAY1
Media has misfed in
Tray 1.
PAPER JAM
TRAYX
Media has misfed
while being pulled
from the specified
tray (Tray 2, 3 or 4).
PAPER JAM
UPPER TRANS
Media has misfed in
the relay unit.
PAPER JAM
VERTICAL TRANS
Media has misfed in
the vertical transfer
area.
Status, Error, and Service Messages
Downloaded From ManualsPrinter.com Manuals
do this...
Press the
key to display the help screen.
Follow the instructions in
the help screen to
remove the misfed
media.
221
This message...
means...
do this...
I-UNIT END
REPLACE
X
The X Print unit has
completely reached
the end of its life.
Replace the Print unit.
I-UNIT MISSING
CHECK X
The X print unit is not Install a correct KONICA
installed, or an unap- MINOLTA print unit.
proved print unit is
installed.
STAPLER EMPTY
REPLACE STAPLE
CARTRIDGE
The staples are
Replace the staple carempty when an
tridge.
attempt was made to
print a staple job.
TONER EMPTY
REPLACE
X
The X toner cartridge Replace the toner caris completely empty. tridge.
TONER MISSING
CHECK X
The X toner cartridge Install a correct KONICA
is not installed, or an MINOLTA toner carunapproved toner
tridge.
cartridge is installed.
TRAY X EMPTY
“SIZE”
“MEDIA”
The X (Tray 1, 2, 3 or Load the correct media
4) was specified with into the specified tray.
the printer driver for
printing, but Tray X is
empty. This message
appears when the
PAPER MENU/
PAPER SOURCE/
TRAY CHAINING
menu is set to OFF.
TRAYX PAPER ERR
“SIZE”
“MEDIA”
The media size/type Load the correct media
set in the printer
size and type.
driver is different from
the size/type of media
loaded. This message
appears when the
PAPER MENU/
PAPER SOURCE/
TRAY CHAINING
menu is set to OFF.
222
Status, Error, and Service Messages
Downloaded From ManualsPrinter.com Manuals
This message...
means...
TRAYX SIZE ERR
ADD
“SIZE”
The media size set in Load the correct media
the printer driver is
size into the specified
different from the size tray.
of media loaded.
TRAYX TYPE ERR
ADD
“MEDIA”
The media type set in Load the correct media
the printer driver is
type into the specified
different from the type tray.
of media loaded.
WASTE TONER FULL
REPLACE BOTTLE
The waste toner
bottle is full.
CONFIGURATION ERR
The printer configura- Reboot the printer
tion was changed
when the printer
power was on.
INCORRECT
TONER X
The X toner cartridge Install a KONICAMIis an unapproved
NOLTA toner cartridge of
type.
the appropriate type
(EU). See page 133.
Status, Error, and Service Messages
Downloaded From ManualsPrinter.com Manuals
do this...
Install a new waste toner
bottle.
223
Service Messages:
These messages indicate a more serious error that can only be corrected by
a customer service engineer. If one of these messages appears, turn the
printer off, then turn it on again. If the problem persists, contact your local
vendor or authorized service provider.
This service
message...
means...
SERVICE CALL XXXX An error has been
detected with the item
“Error”
indicated “XXXX” in the
service message.
do this...
Reboot the printer. This
often clears the service
message, and printer
operation can resume.
Information about errors If the problem persists,
appears at the bottom of contact Technical Supthe message window.
port.
224
Status, Error, and Service Messages
Downloaded From ManualsPrinter.com Manuals
Installing
Accessories
Downloaded From ManualsPrinter.com Manuals
11
Introduction
Note
Use of accessories not manufactured or supported by
KONICA MINOLTA will void your warranty.
"
This chapter provides information about the following accessories.
Dual In-Line
Memory Module
(DIMM)
256 MB, 512 MB DIMM
(DDR-SDRAM, 266 MHz, 184 pins, No ECC, Unbuffered, CL=2 or 2.5)
Duplex Option
Auto duplexing
Lower Feeder Unit
(Tray 3/4)
500-sheet tray included
Hard Disk Kit
40 GB Hard Disk
Compact Flash
256 MB, 512 MB, 1 GB
Note
Installing accessories always requires that the printer and accessories
are turned off and unplugged during installation.
Antistatic Protection
Note
It’s very important to protect the printer controller board from
electrostatic damage while performing any task involving the controller
board.
Turn off all power switches first. If an antistatic wrist strap is provided in
your printer option kit, attach one end of it to your wrist and the other
end to the bare metal chassis on the back of your printer. Never attach
the wrist strap to any piece of equipment with an electrical current
present. Plastic, rubber, wood, painted metal surfaces, and telephones
are not acceptable grounding points.
If you don’t have an antistatic wrist strap, discharge your body’s static
electric charge by touching a grounded surface before you handle any
printer boards or components. Also avoid walking around after
grounding yourself.
226
Downloaded From ManualsPrinter.com Manuals
Introduction
Dual In-Line Memory Module (DIMM)
"
You may need additional memory (DIMM) for complex graphics and
for duplex (Double-Sided) printing.
Dual in-line memory module (or DIMM) is compact circuit board with surface-mount memory chips.
The printer, which has two memory slots, has a 256 MB memory module
already installed in one of the slots. By using both slots, the memory can be
expanded to a maximum of 1024 MB (512 MB + 512 MB).
Installing a DIMM
Note
It’s very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 226. In addition,
always handle circuit boards by the edges only.
1
2
Turn off the printer and disconnect the power cord and interface cables.
Using a screwdriver, remove the
screw. Then, slide the rear cover
to the right and remove it.
Dual In-Line Memory Module (DIMM)
Downloaded From ManualsPrinter.com Manuals
227
3
4
5
Using a screwdriver, loosen the
seven screws. (Do not remove
them from the printer.)
Slide the panel slightly to the
right and lift it off the printer.
Insert the new DIMM straight
into the DIMM connector until
the latches snap into the locked
position.
Observe the keyed side of the
DIMM to align it with the connector. If you cannot snap the DIMM
into place, do not force it. Reposition it, making sure that the
DIMM is seated completely in
the connector.
6
7
8
228
Reinstall the panel and tighten the seven screws.
Attach the rear cover.
Reconnect all interface cables.
Dual In-Line Memory Module (DIMM)
Downloaded From ManualsPrinter.com Manuals
9
10
11
Reconnect the power cord, and
turn on the printer.
Declare the additional Printer Memory in the Windows printer driver
(Properties/Configure tab).
Print a configuration page (PRINT MENU/CONFIGURATION PG) and
verify that the total amount of the RAM installed in your printer is listed.
Dual In-Line Memory Module (DIMM)
Downloaded From ManualsPrinter.com Manuals
229
Hard Disk Kit
If a hard disk drive is installed, fonts can be downloaded and saved, and the
overlay function can be used.
Installing the Hard Disk drive
Note
It’s very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 226. In addition,
always handle circuit boards by the edges only.
1
2
Turn off the printer and disconnect the power cord and interface cables.
Using a screwdriver, remove the
screw. Then, slide the rear cover
to the right and remove it.
230
Downloaded From ManualsPrinter.com Manuals
Hard Disk Kit
3
4
5
Using a screwdriver, loosen the
seven screws. (Do not remove
them from the printer.)
Slide the panel slightly to the
right and lift it off the printer.
Plug the cable on the hard disk
drive into the connector on the
controller board.
Hard Disk Kit
Downloaded From ManualsPrinter.com Manuals
231
6
7
8
9
10
11
Insert the three mounting pins
on the hard disk drive into the
holes in the controller board in
the order shown in the illustration at the right to mount the
hard disk drive onto the controller board.
Reinstall the panel and tighten the seven screws.
Attach the rear cover.
Reconnect all interface cables.
Reconnect the power cord, and
turn on the printer.
Declare the Hard Disk in the Windows printer driver (Properties/Configure
tab).
232
Downloaded From ManualsPrinter.com Manuals
Hard Disk Kit
CompactFlash
If a CompactFlash card is installed, resources such as fonts, macros and profiles can be downloaded, and image files can be printed directly.
"
"
Only CompactFlash cards with a capacity of 256 MB, 512 MB or 1 GB
can be used.
The Hold Job function is not available with a CompactFlash card.
These functions require that an optional hard disk drive be installed.
Installing the CompactFlash card
Note
If the installed CompactFlash card was used with a device other than
this printer, such as a computer or digital camera, the card is
automatically formatted and all of its data is deleted.
Note
It is very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 226. In addition,
always handle circuit boards by their edges only.
1
Turn off the printer and disconnect the power cord and interface cables.
CompactFlash
Downloaded From ManualsPrinter.com Manuals
233
2
3
4
Using a screwdriver, remove the
screw. Then, slide the rear cover
to the right and remove it.
Using a screwdriver, loosen the
seven screws. (Do not remove
them from the printer.)
Slide the panel slightly to the
right and lift it off the printer.
234
Downloaded From ManualsPrinter.com Manuals
CompactFlash
5
Fully insert the CompactFlash
card into the appropriate slot.
When the CompactFlash card is
correctly inserted, the button on
the top side of the slot (circled in
the illustration) slightly pops out.
"
6
7
8
9
10
Before removing the
CompactFlash card,
press in this button.
Reinstall the panel and tighten the seven screws.
Attach the rear cover.
Reconnect all interface cables.
Reconnect the power cord, and
turn on the printer.
Declare the Memory card in the Windows printer driver (Properties/Configure tab).
CompactFlash
Downloaded From ManualsPrinter.com Manuals
235
Duplex Option
Duplex (Double-Sided) printing can be performed automatically with the
duplex option and enough memory installed. See “Duplexing” on page 126.
Installing the Duplex Option
1
2
Turn off the printer.
Remove the cover on the right
side cover.
236
Downloaded From ManualsPrinter.com Manuals
Duplex Option
3
4
Remove the door at the side of
the right side cover.
Prepare the duplex option.
"
5
Before installing the
duplex option, open the
duplex cover, and then
check that the knob is
positioned as shown in
the illustration. Then,
close the duplex cover.
Attach the duplex option, as
shown in the illustration.
Duplex Option
Downloaded From ManualsPrinter.com Manuals
237
6
7
8
Open the duplex cover, and then
turn both knobs counterclockwise until they are horizontal to
secure the duplex option to the
right side cover.
Then, close the duplex cover.
Declare the Duplex Unit in the Windows printer driver (Properties/Configure tab).
238
Downloaded From ManualsPrinter.com Manuals
Duplex Option
Lower Feeder Unit
You can install up to two optional lower feeder units (Trays 3 and 4). Each
lower feeder unit increases your printer’s media feed capacity by 500 sheets.
Kit Contents
„ Lower feeder unit with a tray (500-sheet capacity)
„ Four metal brackets
– Two front brackets
– Two rear brackets
„ Four securing screws
„ Transport guide (used only for Tray 3)
Lower Feeder Unit
Downloaded From ManualsPrinter.com Manuals
239
Installing a Lower Feeder Unit
Note
Since consumables are installed in the printer, be sure to keep the
printer level when moving it in order to prevent accidental spills.
1
2
3
Turn off the printer and disconnect the power cord and interface cables.
Prepare the lower feeder unit.
"
Be sure to place the lower feeder unit on a level surface.
Open the right side cover of the
lower feeder unit.
"
The right side cover of the lower feeder must be opened before the
feeder can be installed onto the printer.
240
Downloaded From ManualsPrinter.com Manuals
Lower Feeder Unit
4
With another person’s help,
place the printer on top of the
lower feeder unit, making sure
that the positioning pins on the
lower feeder unit correctly fit into
the holes on the bottom of the
printer.
44 kg
97 lbs
"
If two lower feeder units are to be installed, stack the two lower
feeder units and secure them together before installing them to the
printer.
WARNING!
This printer weighs approximately 44 kg (97.0 lb) when it is fully loaded
with consumables. The printer must be lifted by two people.
5
Using a screwdriver, install the
two securing brackets at the rear
of the printer.
Lower Feeder Unit
Downloaded From ManualsPrinter.com Manuals
241
6
7
8
9
Pull out the trays.
Install the two securing brackets
at the front of the printer.
Close the trays.
Attach the transport guide to the
right door of Tray 3.
"
It is not necessary to
attach the transport guide
to the right door of Tray 4.
242
Downloaded From ManualsPrinter.com Manuals
Lower Feeder Unit
10
11
Close the right side cover of the
lower feeder unit.
Declare Paper Source Unit 3/4 in the Windows printer driver (Properties/
Configure tab).
Lower Feeder Unit
Downloaded From ManualsPrinter.com Manuals
243
Staple Finisher
When the staple finisher is installed, job separation, offset and staple printing
can be performed.
Accessories
1 Staple Finisher
2 Relay Unit
3 Main output tray
2
4 Sub output tray
5 Hooks (For securing the
relay unit)
6
5
6 Hooks (For installing the
staple finisher)
7 Mounting clips for the main
output tray
4
1
7
1
2
3
3
4
5
6
7
244
Downloaded From ManualsPrinter.com Manuals
Staple Finisher
Unpacking and installing the Staple Finisher
1
2
Open the box for the optional finisher.
Unpack the relay unit, and then
open the relay unit cover
3
Remove all packing tape.
4
Close the relay unit cover.
Staple Finisher
Downloaded From ManualsPrinter.com Manuals
245
5
Remove the two mounting hooks
in the bag taped to the back of
the relay unit.
"
"
Since the gears (1) are
exposed, be careful not
to grab them or hit them.
2
Since the performance of
the transport roller and
springs (2) may be
greatly reduced if they
are firmly grabbed, treat
them with special care.
1
6
Turn off the machine and disconnect the power cord and interface cables.
246
Downloaded From ManualsPrinter.com Manuals
Staple Finisher
7
Remove the output tray from the
machine.
"
8
9
While lightly bending the
output tray as much as
possible, remove the output tray.
Remove the inside cover (three
locations) at the top of the
machine.
Use a coin to remove the front
cover (two locations) at the top
of the machine.
Staple Finisher
Downloaded From ManualsPrinter.com Manuals
247
10
11
Install the relay unit on the
machine.
Open the relay unit cover.
248
Downloaded From ManualsPrinter.com Manuals
Staple Finisher
12
13
14
With your fingers, press the left
and right pins. Make sure that
the pins are pushed in.
Secure the relay unit on the
machine with the two mounting
hooks.
Lock the relay unit lever.
Staple Finisher
Downloaded From ManualsPrinter.com Manuals
249
15
16
17
18
Close the relay unit cover.
Remove the two finisher-mounting hooks from the box.
Remove the main output tray
and the sub output tray, and then
unpack them.
Hold the left and right sides of
the staple finisher and lift it out of
the box.
"
19
When grabbing the staple
finisher, be sure to grab
the areas indicated in the
illustration.
Remove the sheet from the staple finisher.
250
Downloaded From ManualsPrinter.com Manuals
Staple Finisher
20
21
22
Remove the packing tape and
packing materials from the connectors and the outside of the
staple finisher.
Open the stapler cover, and then
remove the tape securing the
staple cartridge.
Use a coin to remove the cover
(two locations) on the left side of
the machine.
Staple Finisher
Downloaded From ManualsPrinter.com Manuals
251
23
24
Secure the two mounting hooks
on the staple finisher to the left
side of the machine.
Align the side of the relay unit
with that of the staple finisher,
and then hook them onto the finisher to install them.
"
When grabbing the staple
finisher, be sure to grab
the areas indicated in the
illustration.
252
Downloaded From ManualsPrinter.com Manuals
Staple Finisher
25
26
27
Remove the two mounting clips
from the main output tray.
Insert the main output tray.
Secure the main output tray with
the mounting clips.
Staple Finisher
Downloaded From ManualsPrinter.com Manuals
253
28
29
30
31
Install the sub output tray.
Insert the connector on the finisher into the connector on the
machine.
Reconnect the power cord, and
turn on the machine.
Declare the staple finisher in the
printer driver (Properties/Configure tab).
254
Downloaded From ManualsPrinter.com Manuals
Staple Finisher
Appendix
Downloaded From ManualsPrinter.com Manuals
A
Safety Specifications
Printer
Safety standards
European model
EU Directive 73/23/EEC
EU Directive 93/68/EEC
EN 60950-1 (IEC 60950)
EMC standards
European model
EU Directive 89/336/EEC
EU Directive 93/68/EEC
EN 55022 (CISPR Pub. 22) class B
EN 61000-3-2
EN 61000-3-3
Technical Specifications
Printer
Type
Desktop Tandem Full Color A4 laser beam
printer
Print system
Electro photographic Printing System
(4colors/toner bottle + print unit of supply type)
Exposure system
4 laser diode and 1 polygon mirror
Developing system
Mono-component SMT
Resolution
600 dpi × 600 dpi × 4 bits
First print
Simplex
Monochrome/ Full color:
14 seconds for A4/ Letter (plain
paper)
Duplex (Double-Sided)
Monochrome:
19 seconds for A4/ Letter (plain
paper)
Full color:
21 seconds for A4/ Letter (plain
paper)
256
Downloaded From ManualsPrinter.com Manuals
Safety Specifications
Print speed
Simplex
Monochrome:
35/37 page per minutes for A4/
Letter (plain paper)
Full color:
30/31.7 page per minutes for A4/
Letter (plain paper)
Duplex (Double-Sided)
Monochrome:
22.5 page per minutes for A4/
Letter (plain paper)
Full color:
19.4 page per minutes for A4/
Letter (plain paper)
Media sizes
Tray 1 (Manual feed tray)
Paper width: 92 to 216 mm (3.6 to 8.5")
Paper length: 148 to 1200 mm (5.8 to 47.2")
Tray 2
A4/Letter
Trays 3 and 4 (Optional)
B5 (JIS) - Legal
Paper/Media
•
•
•
•
•
•
•
•
•
•
•
Input capacity
Tray 1 (Manual feed tray)
Plain/Recycled paper:100 sheets
Envelope:
10 envelopes
Label/Postcard/Thick 1/Thick 2/Glossy 1/
Glossy 2/Transparency/Letterhead: 20 sheets
Banner paper: 1 sheet
Tray 2
Plain/Recycled paper:500 sheets
Tray 3 and 4 (Optional)
Plain/Recycled paper:500 sheets
Technical Specifications
Downloaded From ManualsPrinter.com Manuals
Plain paper (60 to 90 g/m2; 16 to 24 lb bond)
Recycled (60 to 90 g/m2; 16 to 24 lb bond)
Transparencies
Envelopes
Letterhead
Label
Thick 1 (91 to 150 g/m2)
Thick 2 (151 to 210 g/m2)
Postcard
Glossy 1
Glossy 2
257
Output capacity
Output tray: 250 sheets (A4, Letter)
Finisher output capacity
Main output tray: 500 sheets (A4 or Letter)
Sub output tray: 100 sheets (A4 or Letter)
Operating temperature
10 to 35°C (50 to 95°F)
Operating humidity
15 to 85%
Power supply
220 to 240 V, 50 to 60 Hz
Power consumption
230 V: 1400 W or less
Energy Saver Mode: 18 W or less
Amperage
220 to 240 V: 6.5 A or less
Warm-up time
Avg. 45 seconds (Time to return to READY from
the ENERGY SAVER mode)
Acoustic Noise
Printing: 56 dB or less
Standby: 39 dB or less
External dimensions
Height: 420 mm (16.5")
Width: 526 mm (20.7")
Depth: 420 mm (16.5")
Weight
Printer: approximately 33.4 kg (73.6 lb) (Not
including consumables)
approximately 44 kg (97.0 lb) (Packaged
condition/including consumables)
Toner cartridge:
Standard in-box cartridge =
1.65 kg (3.64 lb) (Y, M, C)/
1.68 kg (3.70 lb) (K)
Replacement cartridge (High-Capacity)=
1.65 kg (3.64 lb) (Y, M, C)/
1.68 kg (3.70 lb) (K)
Interface
USB 2.0 (High Speed) compliant, 10Base-T/
100Base-TX/1000Base-T Ethernet, Parallel
CPU
Freescale PowerPC7448
866 MHz
Standard memory
256 MB
258
Downloaded From ManualsPrinter.com Manuals
Technical Specifications
Consumable Life Expectancy Chart
User-Replaceable
Item
Average Life Expectancy
Toner cartridge
Standard in-box Cartridge:
Printed within a constant environment
12,000 pages or more (Continuous)
Printed outside of a constant environment
9,600 pages or more (Continuous)
Replacement Cartridge (High-Capacity):
Printed within a constant environment
12,000 pages or more (Continuous)
Printed outside of a constant environment
9,600 pages or more (Continuous)
Print unit
30,000 pages (Continuous)
Waste toner bottle
36,000 pages (Monochrome) (Continuous)
9,000 pages (Full color) (Continuous)
Transfer roller
120,000 pages (Continuous)
Ozone Filter (Bundle with 120,000 pages
transfer roller)
Transfer belt unit
120,000 pages (Continuous)
Note: A constant environment is one with a temperature between
15 °C [59 °F] and 25 °C [77 °F] and humidity between 35% and 70%.
"
The values shown for the toner cartridge and waste toner bottle indicate the number of pages for simplex printing using A4/Letter-size
media with 5% coverage.
The actual life may differ (be shorter) depending on the printing conditions (coverage, paper size, etc.), differences in the printing method,
such as continuous printing or intermittent printing (when print jobs of
one page are often printed), or the type of paper used, for example,
thick paper. In addition, the life will be affected by the temperature and
humidity of the operating environment.
Service-Replaceable
Item
Average Life Expectancy
Fuser unit
150,000 pages (Continuous)
Media feed roller
300,000 pages
Technical Specifications
Downloaded From ManualsPrinter.com Manuals
259
Our Concern for Environmental Protection
As an ENERGY STAR® Partner, we have determined that this machine meets
the ENERGY STAR Guidelines for energy efficiency.
What is an ENERGY STAR product?
An ENERGY STAR product has a special feature that allows it to automatically switch to a “low-power mode” after a period of inactivity. An ENERGY
STAR product uses energy more efficiently, saves you money on utility bills
and helps protect the environment.
260
Our Concern for Environmental Protection
Downloaded From ManualsPrinter.com Manuals
Index
A
Accessories 226
CompactFlash 233
DIMMs 227
Duplex option 236
Hard disk Kit 230
Lower feeder unit 239
Staple Finisher 244
Antistatic protection 226
Transfer belt unit 152
Transfer roller 148
Waste toner bottle 145
Control panel 28
D
Dual in-line memory module 227
Duplexing 126
Duplex option 236
C
E
Camera direct 94
CompactFlash 233
Configuration menu 32
Consumables
Backup battery 158
Ozone filter 151
Print unit 139
Staple 161
Toner cartridge 132
Electrostatic discharge 226
Envelopes 101
Error messages 215
Index
Downloaded From ManualsPrinter.com Manuals
F
Finishing 128
Staple Finisher 244
261
G
Glossy Media 106
H
Hard disk Kit 230
I
Imageable area 107
L
Labels 102
Letterhead 103
Loading media 108
Lower feeder unit 239
M
Maintenance 166
Media
Clearing misfeeds 179
Imageable area 107
Loading 108
Path 178
Preventing misfeeds 177
Media misfeed
Duplex option 187
Fuser unit 188
Relay Unit 193
Staple Finisher 194
Staples 197
Transfer roller 191
Tray 1 191
Tray 2 181
Tray 3 and 4 185
Media path 178
Media storage 130
Media type
Envelopes 101
Glossy media 106
Labels 102
Letterhead 103
Plain paper 99
Postcards 104
Thick stock 101
Transparencies 105
Memory Direct 96
Message window 30
Messages 214
Misfeed problems 199
Clearing 179
Media path 178
Preventing 177
O
Output tray 127
P
Plain paper 99
Postcards 104
Preventing media misfeeds 177
Print quality 208
Printer
Parts 4
Printer driver (Postscript, PCL) 17
Advanced tab 18
Basic tab 19
Cover page tab 20
Displaying 16
Layout tab 19
Overlay tab 20
Quality tab 21
Uninstalling 15
Version tab 21
Watermark tab 20
Printer driver (PPD)
Displaying 16
Uninstalling 15
S
Service messages 224
Staple Finisher 244
Status monitor 24
Opening 24
Using 24
T
Thick stock 101
Transparencies 105
Troubleshooting 175
262
Downloaded From ManualsPrinter.com Manuals
Index
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising