336 3 us~v~Specification Sheet

336 3 us~v~Specification Sheet
HEAT RECOVERY VENTILATOR
C12 HRV
Controls
Part no. 41552 (TOP PORTS)
Part no. 41550 (SIDE PORTS)
• This unit is very simple to operate. Once it is installed, press on its
push button, located on on the bottom of the unit, to activate it.
Press once for low speed, once again for high speed, and once more
to stop it.
64 to 115 CFM (0.4 in. w.g.)
• For more convenience, this unit can also be controlled by an optional
main control. For a complete list of optional main and auxiliary
controls available, refer to the Wall Control Compatibility Chart
on last pages of wall controls specification sheet, available at
www.venmar.ca.
• For more details about controls, refer to the Main and auxiliary wall
controls user guide, also available at www.venmar.ca.
Options
• Complete line of registers and diffusers
• Electric duct heater
VB0228
AN INGENIOUS AIR EXCHANGE SOLUTION THAT’S AS
VERSATILE AS IT IS COMPACT!
Configured with factory built vertical or horizontal ports, the
AVS C12 HRV is the most versatile 115-cfm unit available on the market
today. Among its exclusive features, this unit is equipped with
integrated balancing and backdraft dampers in its exhaust to outside
and fresh air supply ports.
Its operation can be interlocked with an existing furnace without
adding an extra relay. Also, for more convenience, its latches can be
relocated from sides to front (as shown on unit picture). This compact,
lightweight, and powerful unit is the ideal choice for small
single-family homes, high rise residential buildings and other limited
space applications.
• Versatile horizontal or vertical port configuration
• Removable terminal block to ease auxiliary wall control connections
• Integrated pressure taps, if balancing required by building code
• ENERGY STAR® qualified
REPAIRS AND MAINTENANCE
All parts of the AVS C12 HRV that could need maintenance can be
removed in less than 5 minutes, allowing direct access for easy repairs.
The PSC motors are permanently lubricated. Finally, the removable
electrical drawer with pull-out PCB assembly allows easy access for
maintenance of major sub-components.
WARRANTY
The AVS C12 HRV is protected by a 5-year warranty on parts only. The
heat recovery core is covered by a limited lifetime warranty, with the
original proof of purchase.
• Metal tandem hood (part no. 14695)
Homeshield™ Defrosting System
The C12 HRV uses a unique defrosting method. No negative pressure is
created by air exhausted to the outdoors, as the air is recirculated into
the house, helping to prevent any backdraft.
OUTDOOR
TEMPERATURE
STALE AIR
FROM
BUILDING
FILTERED
AIR TO
BUILDING
VF0036
DEFROST CYCLE
(IN MINUTES)
oC
oF
DEFROST/
OPERATION
WARMER
THAN -5
WARMER
THAN 23
NO DEFROST
-5 TO -27
23 TO -17
8/25
-27 & LESS
-17 & LESS
10/22
Heat Recovery Core
Dimensions: 13” x 19” x 6 7/8” (33 cm x 48.3 cm x 17.3 cm)
Exchange surface: 55 ft.2 (5.1 m2)
Weight: 3.75 lb. (1.7 kg)
Material: Polypropylene
Type: Cross flow
Warranty: Limited lifetime
Requirements and standards
• Complies with the UL 1812 requirements regulating the installation
of Heat Recovery Ventilators
• Complies with the CSA C22.2 no. 113 Standard applicable to ventilators
• Complies with CSA C444 requirements regulating the installation of
Heat Recovery Ventilators
Available at:
• Technical data was obtained from published results of tests relating
to CSA C439 Standards
• HVI certified and ENERGY STAR® qualified
DIMENSIONS: C12 HRV (PORTS ON SIDES)
27 1/16” (688 mm)
ALL PORTS FITS
5” DIAMETER DUCTS
4” (102 mm)
1
2
6”
(152 mm)
NET SUPPLY
AIR FLOW
L/S
CFM
M3/H
62
59
56
54
50
49
46
44
41
40
131
126
119
115
107
103
97
93
86
84
223
214
202
195
182
175
165
158
146
143
L/S
62
60
56
54
51
49
46
44
41
40
4
3: FRESH AIR FROM OUTSIDE PORT
4: EXHAUST AIR TO OUTSIDE PORT
2” (51 mm)
VENTILATION PERFORMANCE
12 3 /16”
(310 mm)
3
13¾”
(349 mm)
1: FRESH AIR TO BUILDING PORT
2: EXHAUST AIR FROM BUILDING PORT
VK0055A
EXTERNAL
STATIC PRESSURE
PA
IN. W.G.
25
0.1
50
0.2
75
0.3
100
0.4
125
0.5
150
0.6
175
0.7
200
0.8
225
0.9
250
1.0
19 13 /16” (503 mm)
22 9/16” (574 mm)
C12 HRV (PORTS ON TOP)
ALL PORTS FITS
5” DIAMETER DUCTS
GROSS AIR FLOW
SUPPLY
EXHAUST
CFM
M3/H
L/S
CFM
M3/H
132 224 63 134 228
127 216 60 127 216
120 204 58 123 209
116 197 55 117 199
108 183 53 112 190
104 177 51 107 182
98
167 48 102 173
94
160 45
95
161
87
148 42
88
150
85
144 40
85
144
1
4
4’’ (102 mm)
19 13 16”
(503 mm)
2
3
6’’ (152 mm)
22 9 16” (574 mm)
23¾” (603 mm)
2½”
(64 mm)
ENERGY PERFORMANCE
SUPPLY
TEMPERATURE
°C °F
HEATING
0 32
0 32
0 32
-25 -13
-25 -13
COOLING
35 95
NET AIR FLOW
M3/H
L/S
CFM
23
30
39
23
30
50 85
64 109
83 141
48 82
64 109
-
-
-
POWER
SENSIBLE
APPARENT LATENT RECOVERY/
CONSUMED RECOVERY
SENSIBLE
MOISTURE
EFFICIENCY EFFECTIVENESS
TRANSFER
WATTS
43
58
70
56
64
65
62
59
60
55
74
70
66
78
72
0.01
0.01
0.01
0.01
0
TOTAL RECOVERY EFFICIENCY
NOT TESTED
-
16¼”
(413 mm)
VK0056A
12 3 16”
(310 mm)
1: FRESH AIR TO BUILDING PORT
2: EXHAUST AIR FROM BUILDING PORT
3: FRESH AIR FROM OUTSIDE PORT
4: EXHAUST AIR TO OUTSIDE PORT
NOTE: All specifications are subject to change without notice.
SPECIFICATIONS
• Model: C12 HRV
• Core filters: 30 ppi washable foam
• Part number top ports: 41552
10.5” x 6.75” x 0.5” (26.7 cm x 17.2 cm x 1.3 cm)
• Part number side ports: 41550
• Housing: Pre-painted steel
• Total assembled weight (including
• Insulation: Expanded polystyrene
polypropylene core): 42 lb. (19 kg)
• Speed control on unit: Low & high speeds.
Other modes available with main and
optional wall controls
• Mounting: Suspension by chains and springs
• Heat recovery core:
- Heat exchange surface area: 55 ft.2 (5.1 m2)
- Type/Material: Crossflow/Polypropylene
• Oval shaped ports; fit 5” diameter ducts
• Drain: 1/2” (1.2 cm) fittings with
10 ft. (3 m) PVC drain hose
Project:
Location:
Part Number:
Qty.:
Submitted by:
• Supply and exhaust blower motor: 2 motors • Unit electrical characteristics:
- Protection type: Thermally protected
Volts
Frequency
Ampere
Watts
- Insulation class: B
120
60 Hz
1.00
120
REMARKS
Date:
Residential Products Group, 550 Lemire Blvd., Drummondville, Qc, Canada J2C 7W9 - Tel.: 1-800-567-3855 Fax 1-800-567-1715
www.venmar.ca
C12HRVd150407
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement