Complete Metalworking Tools Catalog
Metalworking Tools for Marine, Bridge,
Pipeline and Process Industries
Surface Preparation Tools & Dust Collection Vacuums
CS Unitec's Trelawny™ line of surface preparation tools features many Vibro-Lo™ models.
These models include integrated vibration reduction technology to operate with 7x less
vibration than standard models. Vibration damping components offset the hammer vibration
when the tool impacts the workpiece, reducing the risk of vibration-related injury.
Hand-Held Scarifiers – Rotopeen™ (Pneumatic • Electric)
p. 4
• Ideal alternative to small-area shot blasting
• Clean and prepare steel and concrete surfaces
• Available with 3M's Rotopeen™ 'C' flaps, star cutters and beam cutters
Hand-Held Scaling Hammers (Pneumatic)
p. 5
• Low-Vibration Single-Head and Triple-Head Scaling Hammers
• Remove thick scale, heavy corrosion, hard coatings and more
• Optional spark-resistant copper beryllium cutter heads
Vibration Reduction Technology
Low-Vibration Needle/Chisel Scalers (Pneumatic)
p. 6-9
Vibro-Lo™
• Vibro-Lo™ Needle/Chisel Scalers remove coatings, corrosion
Vibro-Lo™
and other accumulated materials
Vibration Reduction Technology
• Clean and stress-relieve weld seams and joints
• Variety of needles and chisels, including options for use in hazardous areas and Ex zones
Long-Reach Chisels / Scrapers / Scalers (Pneumatic)
p. 10
• Available in lengths ranging from 2' to 6'; chip, scrape and descale with one tool
Low-Vibration Steel Deck Hammer (Pneumatic)
p. 11
• 11 heads and 33,000 blows per minute
Vibro-Lo™
Vibration Reduction Technology
• Fracture and reduce scale, corrosion and thick coatings in minutes,
reducing blast media costs
• Ideal for ship decks, tank bottoms, bridge decks, floating platforms and more
Floor Scarifiers / Planers (Electric • Pneumatic • Gas)
p. 12
• Ideal for the most demanding surface preparation and material removal applications
• Remove rust, scale, paint, adhesives and more from steel and concrete
Trident Neptune Flexible Shaft Deck Descalers (Air • Electric)
p. 13
• Rapidly remove scale, rust, paint and other unwanted deposits on ship decks and other
metal surfaces
Hydraflex Hold Cleaning Gun Kit (Pneumatic)
p. 14
• Reach up to 100 ft. away with high-pressure water jet
• Clean hold areas on bulk carriers and cargo vessels of all sizes
Dust Collection Vacuums (Pneumatic • Electric)
p. 15
• Wet/Dry air-powered models collect dry dust/debris and non-flammable liquids
• ATEX classified, antistatic vacuum and air-supply hose; optional HEPA filter
• Electric-powered wet/dry models with HEPA filtration
2
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Vibro-Lo™
Vibration Reduction
Technology
Reaming, Drilling, Driving, Sawing & More
Reamers, Drills and Drive Motors (Air • Electric • Hydraulic)
p. 16
Bridge reaming and heavy-duty drilling applications in steel and other metals,
as well as tube rolling, tube expanding, tapping, valve turning and more.
Portable Beveling Machines (Electric)
p. 17
Bevel, deburr and chamfer and prepare weld seams on plate and pipe. Portable machines
for 30˚, 45˚ or 2.5 mm bevels, as well as 15˚ to 60˚ continuously adjustable angles.
Dry Cutting Circular Saws (Electric • Pneumatic)
p. 18-19
Fast, portable, burr-free cutting of metal plates, pipes and profiles. Models up to 14".
Portable Reciprocating Saws (Pneumatic • Hydraulic)
p. 20-21
Hand-held or clamp-on cutting in tough environments – fast cutting of pipe,
structural steel, bolts, nails, pallets and other material.
AirPac Dryer / Cleaner • Hydraulic Power Unit
Portable Band Saws (Air • Electric • Hydraulic)
p. 21
p. 22
Fast, on-site cold cutting of pipe up to 8-1/2" diameter.
Power Hacksaws (Air • Electric • Hydraulic)
p. 23
Cold cutting of large pipe up to 30" diameter and structural steel – on site.
Chain Saws (Air • Hydraulic)
p. 24
Bar lengths of 10" to 25"; cut wood, plastic and more.
Underwater / Subsea Tools (Hydraulic • Pneumatic)
Reduced Sparking Diamond Grinding & Cutting Discs
p. 25
p. 26
Reduce sparks, dust and material waste when grinding and cutting steel, stainless
steel, aluminum, titanium, fiberglass and more. Last 100x longer than resin bonded wheels.
Explosion-Proof Axial Fans and Air Movers (Air • Electric)
p. 27
Highly efficient units for ventilating, exhausting and cooling.
Non-Sparking and Non-Magnetic Safety Hand Tools
p. 28-29
For use in hazardous environments and all ATEX and Ex Zones where hazardous,
flammable or combustible vapors, liquids, dusts or residues may be present.
Portable Magnetic Drills (Electric • Pneumatic • Hydraulic)
p. 30-33
Fast, accurate hole cutting up to 5-1/8" dia., twist drilling up to 1-3/4" dia.,
tapping up to 1-5/8" dia. and more.
Linear Grinders and Pipe Sanders (Electric • Pneumatic)
p. 34
Grind flat surfaces and pipes up to 14" from coarse to shadow-free matte finish,
up to a mirror polish. Remove welds, deep scratches, oxidation and rust.
HIPPO Mixing Station and Mixing Drills (Electric • Pneumatic)
p. 35
Mix, transport and pour with one unit. Hand-held units and portable stands also available.
Warranty
Products of CS Unitec, Inc. are warranted to be free from defects in material and workmanship for one year from date of purchase. This warranty does not apply to
normal wear or products which have been abused, misused, modified or repaired by someone other than CS Unitec, Inc. or its Authorized Service Representatives.
If a product proves defective in material or workmanship within one year after purchase, return it to CS Unitec, Inc. or an Authorized Service Center, transportation
prepaid. CS Unitec, Inc. will, at its option, repair or replace defective products free of charge.
CS Unitec, Inc.'s sole liability and your exclusive remedy under this warranty is limited to repair or replacement of the defective product. There are no other warranties
expressed or implied and CS Unitec, Inc. shall not be liable for incidental, consequential or special damages, or expenses excepting only the cost or expense of repair
or replacement as described above.
Safety
Operators of any power tool should use appropriate safety precautions for work being performed. This includes safety chains, eye protection, hearing protection,
gloves and more. Follow instructions included in operating manual.
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
3
Hand-Held Scarifiers - Rotopeen™
Air • Electric
Peening Preparation Tool (PPT) – ideal
alternative to small-area shot blasting
CS Unitec's Trelawny™ Rotopeen™ hand-held scarifiers
are the ideal alternative to small-area shot blasting for
cleaning and preparing steel and concrete surfaces.
They utilize 3M's brand of Rotopeen™ 'C' flaps to
offer a captive shot method of surface preparation.
• Pneumatic and electric models
• Integrated dust shroud for dust and debris
collection, as well as cleaner, safer removal of
lead-based paints and contaminated particles
See page 15 for dust
extraction systems.
Pneumatic Models 194.0405 and
194.C405, 4" cutting width
Applications include:
• Aggressive removal of alkyds, adhesives,
lead-based paints, mastics, coatings
corrosion and more
• Cleaning and preparing steel and
concrete surfaces
Hand-Held Scarifier Accessories
Star Cutter
Beam Cutter
3M™ Rotopeen™ 'C' Flap
P/N 312.S200
P/N 312.R200
Aggressive removal Removal of hard coatings, less
of thick coatings
aggressive than star cutter
P/N 312.MRPC
Removal of light paint and
rust to bare metal finish
LIGHT
BURNISHING
HEAVY
SCALING
Star Cutter
Cutting
Width
Quantity
Required
2"
4"
80
160
Beam Cutter
––––
––––
Radioactive waste removal/capture
Cutting
Width
Quantity
Required
Ships decks
Non-slip coatings
––––
General paint removal
Construction
Plaster removal
Ceiling / wall paint removal
Ceiling / wall paint removal
2"
4"
56
112
––––
Floor marking removal
Floor marking removal
Adhesive removal
Adhesive removal
––––
Sealant removal
––––
Paint / sealant removal
––––
––––
Protective coating removal
Nuclear
Factory Floors
Swimming Pools
Bridge Maintenance
Pipeline Maintenance
Rotopeen™
'C' Flap
Cutting
Width
Quantity
Required
2"
4"
6
12
Pneumatic Hand-Held Scarifiers
Model
Number
CFM @
90 PSI
Speed
(RPM)
Cutting
Width
Cutting
Media
Weight
(lbs.)
Vibration
Levels m/s2
194.0205
194.C205
194.0405
194.C405
30
30
30
30
2700
2700
2700
2700
2"
2"
4"
4"
'C' Flaps
Star Cutters
'C' Flaps
Star Cutters
7.5
11.5
9
13.25
3.5
6.0
3.1
4.6
These models are compatible
with Star Cutters, Beam Cutters
and Rotopeen™ 'C' Flaps
Electric Hand-Held Scarifiers
Model
Number
195.1217
195.1220
4
Motor Power
Speed
(RPM)
Cutting
Width
Cutting
Media
Weight
(lbs.)
Vibration
Levels m/s2
2000
2000
2"
2"
'C' Flaps
'C' Flaps
10
10
3.6
3.6
110V
220V
•
1-800-700-5919
•
Electric Model 195.1220
2" cutting width with
Rotopeen™ 'C' flaps
Visit our Web site at www.csunitec.com
Pneumatic Hand-Held Scaling Hammers
Vibro-Lo™
Vibration Reduction
Technology
Remove thick scale, heavy
corrosion and hard coatings
CS Unitec's Trelawny™ line of pneumatic hand-held
scaling hammers are ideal tools for the removal of thick
scale, heavy corrosion and hard coatings. Areas of
application include pipes, ship decks, oil platforms,
storage tanks and bridge structures.
• Single-head scaling hammer includes Vibro-Lo™ vibration
reduction technology
• Optional spark-resistant copper beryllium replacement heads
reduce risk of explosion in potentially hazardous areas
• Detachable taper fit cutter head reduces cost of replacement
and extends piston life
Applications Include:
• Pipes
• Ship Decks
• Oil Platforms
• Storage Tanks
• Bridge Structures
Pneumatic
CS Unitec's Trelawny™ Single-Head
Hand-Held scaler operates with 7x less
vibration than standard models. This tool
utilizes vibration damping components to
offset the hammer vibration created when
the head impacts the workpiece.
Hand-Held Scaling Hammer Accessories
Part No.
For Model Numbers
TCT Cruciform
Cutter Head
426.5351
151.5100, 196.5095
and 153.5300
Copper Beryllium
(CuBe) Cruciform
Cutter Head
606.5303
151.5110 and 153.5310
Bush Cutter Head
426.5352
151.5105 and 153.5305
Common Tapered
Piston
612.5301
All models shown below
Copper Beryllium
for use in potentially
explosive areas
H
Cruciform
Bush
Pneumatic Hand-Held Scaling Hammers
Model
Single
Head
Blows
Noise Vibration
Model Weight Dimensions
per
CFM @ Level Levels
Number (lbs.)
(LxH)
minute 90 PSI db(A)
m/s2
Description
TCT Cruciform Piston
151.5100
5.5
19" x 6"
3000
7
88.1
6.8
Bush Hammer Piston
151.5105
5.5
19" x 6"
3000
7
88.1
6.8
CuBe Cruciform Piston 151.5110
5.5
19" x 6"
3000
7
88.1
6.8
LowVibration TCT Cruciform Piston
Single Head
196.5095
5.5
19" x 5.5"
3000
7
88.1
3.7
TCT Cruciform Piston
153.5300
8
19" x 6"
9000
7
88.1
13.4
Triple Head Bush Hammer Piston
153.5305
8
19" x 6"
9000
7
88.1
13.4
CuBe Cruciform Piston 153.5310
8
19" x 6"
9000
7
88.1
13.4
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
H
Vibro-Lo™
H
5
Low-Vibration Needle/Chisel Scalers
Vibro-Lo™
Vibration Reduction
Technology
High power with low vibration –
equipped with Vibro-Lo™
CS Unitec's Trelawny™ line of Low-Vibration needle/chisel
scalers offer high performance and low vibration for
greater productivity and improved operator comfort.
Ergonomically designed with low maintenance and quick
change tooling option.
• Integrated Vibro-Lo™ vibration reduction technology
• Lightweight, easy to handle
• Optional dust shroud for dust and debris collection
• Tool-free needle changeover
• Converts to chisel scaler in seconds
VL223
CS Unitec's Trelawny™ VibroLo™ line of Needle/Chisel
Scalers operate with 7x less
vibration than standard
models. These tools utilize
vibration damping components
to offset the hammer vibration
created when the needles/chisels
impact the workpiece.
VL203
VL303
Needle Scalers and
Chisel Scalers convert in
seconds with optional
head or when purchased
as a Kit. See following
page for Kit information.
6
Applications include:
• Cleaning and stress-relieving
weld seams and joints
• Removing coatings, corrosion
and other accumulated materials
• Texturing concrete
• Splitting, chipping, pointing and brick raking
Dust Collection
Shroud
Low-Vibration Needle/Chisel Scalers
Vibro-Lo™
Vibration Reduction
Technology
CS Unitec's Vibro-Lo™ Needle/Chisel Scalers are a safer, more effective
means of removing coatings, corrosion and other accumulated materials.
Vibro-Lo reduces the risk of vibration-related injury.
Vibro-Lo™ Needle Scalers
Grip
Inline
Pistol
Needle
Blows
CFM @
Model Quantity/ Weight
per
Number Diameter (lbs.) minute 90 PSI
Description
Noise
Level
db(A)
Vibration
Levels
m/s2
VL223 Needle Scaler 199.2103
19 / 3mm
5.25
2400
4
90.7
2.56
VL223 Needle Scaler
139.2103
with dust shroud
19 / 3mm
5.25
2400
4
90.7
2.56
VL203 Needle Scaler 199.2003
19 / 3mm
6
2400
4
90.7
2.75
VL203 Needle Scaler 199.2303
with dust shroud
19 / 3mm
6
2400
4
90.7
2.75
VL303 Needle Scaler 199.3003
28 / 3mm
7.75
3000
5.5
109.5
2.3
VL303 Needle Scaler 199.3005
with dust shroud
28 / 3mm
7.75
3000
5.5
109.5
2.3
See page 9 for the
following types of
needles:
Chisel for light
surface marking
Flat for light treatment
and polishing effect
Pointed for very
hard scale
Copper Beryllium
H
for use in potentially
explosive areas
Stainless Steel for use
in applications where
corrosion or humidity is a
problem, such as food
processing industry
Dust Collection Shroud for Vibro-Lo™ Needle Scalers
Optional Dust Shroud for Needle Scalers – for use with dust extraction vacuums.
Model VL223 Needle Scaler – Order Dust Shroud P/N 418.2003
See page 15 for dust
Model VL203 Needle Scaler – Order Dust Shroud P/N 418.2003
extraction systems.
Model VL303 Needle Scaler – Order Dust Shroud P/N 418.3003
Vibro-Lo™ Chisel Scalers
Grip
Blows
Noise Vibration
Model Weight
per
CFM @ Level Levels
Number (lbs.) minute 90 PSI db(A)
m/s2
Description
Inline VL223 Chisel Scaler 199.2213
Pistol
6.5
2400
4
76.3
3.69
VL203 Chisel Scaler 199.2203
7
2400
4
76.3
3.33
VL303 Chisel Scaler 199.3203
9.5
3000
5.5
78.2
3.7
Chisel Part
Number
Shank
704.3110
Square
7"
2"
704.3205
Square
Cranked End
7"
3/8"
Weld flux and thick
coating removal
704.3101
Square
7"
3/4"
Weld splatter removal
704.3103
Square
7"
2-1/2"
Wide flat chisel for
the removal of rust
or peeling paint
704.3107
Square
10"
3/4"
Flat chisel for weld
splatter and sand
cast cleaning
Drop Protection Kit
Length Width Application
1-800-700-5919
CS Unitec offers
Vibro-Lo™
Needle/Chisel
Scaler Kits, each
supplied with the
Needle Scaler,
3mm needles, a chisel holder,
anvil and a 3/4" blade chisel.
VL223 Kit – Order P/N 199.2113
VL203 Kit – Order P/N 199.2105
VL303 Kit – Order P/N 199.3103
Chisels for Vibro-Lo™ Chisel Scalers
•
Vibro-Lo™ Needle/
Chisel Scaler Kits
Spark resistant
H
Aluminum Bronze
for use in hazardous
areas
•
CS Unitec
offers a full
line of nonsparking,
non-magnetic
chisels and
safety hand
tools for
hazardous
areas and Ex
zones.
Contact us
for details.
CS Unitec offers a drop
protection kit for our
Vibro-Lo™ Needle/
Chisel Scalers. Protect
your investment when
working at heights or in
applications where dropping/ losing
the tool is likely, including: offshore
platforms and rigs, bridges/
scaffolding, vessels and ships.
For VL223 and VL203
Order P/N 720.2003*
For VL303
Order P/N 720.3003*
* Safety clip and line not supplied
Visit our Web site at www.csunitec.com
7
Standard Needle/Chisel Scalers
Standard Needle and Chisel Scalers
Blows
Model
Needle Weight
per
CFM @
Number Qty./Dia. (lbs.) minute 90 PSI
Noise Vibration
Level
Levels
db(A)
m/s2
1B Needle Scaler
1B Chisel Scaler
111.1099 12 / 3mm
114.1200
N/A
3.5
3.3
3800
3800
3.0
3.0
110.4
98.9
8.5
8.2
2B Needle Scaler
2B Chisel Scaler
121.2099 19 / 3mm
124.2200
N/A
5.75
4.4
3000
3000
5.5
5.5
113.3
98.6
9.3
17.4
2BPG Needle Scaler 123.2199 19 / 3mm
2BPG Chisel Scaler 125.2300
N/A
5.75
4.5
3000
3000
5.5
5.5
113.3
98.6
12.6
22.4
Pistol 3BPG Needle Scaler 133.3199 28 / 3mm
3BPG Chisel Scaler 135.3300
N/A
3BPG Chisel Scaler* 135.3395
N/A
8.25
6.2
6.2
2200
2200
2200
8.0
8.0
8.0
114.5
105.1
105.1
18.9
25.6
25.6
3B Needle Scaler
Semi 3B Chisel Scaler
Pistol 4B Needle Scaler
4B Chisel Scaler
131.3099 28 / 3mm
134.3200
N/A
10
7.5
2200
2200
8.0
8.0
114.5
105.1
12.2
19.9
141.4099 35 / 4mm
144.4200
N/A
12.5
8.2
1800
1800
8.5
8.5
117.4
105.1
23.5
45.2
Description
Grip
Inline
* 3BPG Chisel Scaler 135.3395 has 5/8" hexagonal chisel holder and is compatible with chisels shown on page 10.
All others Chisel Scalers shown above have 1/2" square connection.
See page 9 for
needles:
Chisel for light
surface marking
Flat for light treatment
and polishing effect
Pointed for very
hard scale
Copper Beryllium
H
for use in potentially
explosive areas
Stainless Steel for use
in applications where
corrosion or humidity
is a problem, such
as the food
processing industry
Inline Grip
Dust Collection Shroud for Standard Needle Scalers
Optional Dust Shroud for Needle Scalers – for use with dust extraction vacuums.
Model 2B and 2BPG Needle Scalers – Order Dust Shroud P/N 418.2199
Model 3BPG Needle Scaler – Order Dust Shroud P/N 418.3039
TVS™ Needle Scalers with Integrated Vacuum Shroud
Pistol Grip
CS Unitec's Trelawny™ TVS™ Needle Scalers with Integrated Vacuum
Shroud enable dust-free working in hazardous applications when used
with a dust extraction vacuum (see page 15 for dust collection systems).
Blows
Model Weight
per
CFM @
Number (lbs.) minute 90 PSI
Vibration
Levels
m/s2
Grip
Description
Inline
2B Needle Scaler
139.2007
6.4
3000
5.5
98.6
17.4
Pistol
2BPG Needle Scaler 139.2107
3BPG Needle Scaler 139.3107
6.6
9.9
3000
2200
5.5
8.0
98.6
105.1
22.4
19.9
Chisels for Standard Chisel Scalers
Chisel Part No. Shank
Length
Width
Application
704.1110
Square
7"
2"
704.2105
Square
Cranked End
7"
3/8"
Spark-resistant
H
Aluminum Bronze
for use in hazardous areas
Weld flux and thick
coating removal
704.1101
Square
7"
3/4"
Weld splatter removal
704.1103
Square
7"
2-1/2"
704.1107
Square
10"
3/4"
Flat chisel for weld splatter
and sand cast cleaning
704.1106
Square
8"
1/4"
Mortar removal for repointing
brick work
704.1112
Square
7"
•
Semi Pistol
Grip
Standard Needle Scalers and Chisel
Scalers convert in seconds with optional
head or when purchased as a Kit.
Contact us for more information.
1/2" Square Connection
8
Noise
Level
db(A)
Wide flat chisel for the removal
of rust or peeling paint
Moil Point Concrete chipping
1-800-700-5919
•
CS Unitec offers a
full line of nonsparking, nonmagnetic chisels
and safety hand
tools for hazardous
areas and Ex
zones. Contact us
for details.
Above: Model 1B Chisel Scaler
with Square Cranked End Chisel
for removal of flux
Visit our Web site at www.csunitec.com
Needles
CS Unitec's Trelawny™ needles last 10x longer than standard
needles. Save time and money with fewer needle changes and
less downtime.
All of CS Unitec's Needle Scalers are delivered from stock complete
with 180mm long x 3mm diameter chisel tipped high performance
needles. Other needle holders are available as accessories for use
with 2mm and 4mm diameter needles. We also offer spark resistant
needles for use in potentially hazardous areas and Ex zones, as well as stainless steel needles for use
in humid areas - such as applications in the food processing industry - where corrosion is a concern.
Standard pack set is one carton of 6 sets. Some models are packed as an individual set in a box.
Boxes of 100 qty. needles in a durable, reusable plastic container are available, as well as larger
quantities.
Chisel Tip
Pointed Tip
These needles will clean the same
materials as a pointed tip, but will leave
light surface marking
Sharpened to a conical point, these are
the most effective in breaking through
very hard scale on materials where some
surface indentation is permissible - or where a
roughening or keying of the surface is actually
desirable.
Size
Description
Part #
3mm
3mm
3mm
3mm
3mm
3mm
6 x sets of 12 needles
6 x sets of 19 needles
6 x sets of 28 needles
6 x sets of 49 needles
Box of 100 needles
Box of 1000 needles
413.2112
413.2119
413.2128
413.2149
453.2110
443.2107
Flat Tip
Flat-tipped needles will reduce marking
on metal surfaces and can give a
polishing effect. For use on thin gauge
metals and any surface where a light
treatment is required.
2mm needles used on a welded joint produce a similar
effect to shot peening, reducing stress in the weld.
Size
Description
Part #
2mm
2mm
2mm
2mm
2mm
3mm
3mm
3mm
3mm
3mm
3mm
6 x sets of 29 needles
6 x sets of 51 needles
6 x sets of 65 needles
Box of 100 needles
Box of 2000 needles
6 x sets of 12 needles
6 x sets of 19 needles
6 x sets of 28 needles
6 x sets of 49 needles
Box of 100 needles
Box of 1000 needles
(180mm long)
6 x sets of 19 needles
6 x sets of 35 needles
Box of 50 needles
Box of 500 needles
Box of 1000 needles
5" long (127mm)
19 x needles
5" long (127mm)
412.1129
412.1151
412.1165
452.1110
442.1107
413.1112
413.1119
413.1128
413.1149
453.1110
443.1107
4mm
4mm
4mm
4mm
3mm
3mm
•
414.1119
414.1135
454.1105
444.1107
443.1105
Description
Part #
3mm
3mm
3mm
3mm
3mm
3mm
4mm
4mm
4mm
4mm
6 x sets of 12 needles
6 x sets of 19 needles
6 x sets of 28 needles
6 x sets of 49 needles
Box of 100 needles
Box of 1000 needles
6 x sets of 19 needles
6 x sets of 35 needles
Box of 50 needles
Box of 500 needles
413.3112
413.3119
413.3128
413.3149
453.3110
443.3107
414.3119
414.3135
454.3105
444.3107
Conversions:
2mm = 0.08"
3mm = 0.12"
4mm = 0.16"
180mm = 7"
Spark-Resistant Copper Beryllium
Available in 3mm flat top only; for use in potentially
hazardous areas.
Size
Description
Part #
3mm
3mm
3mm
3mm
3mm
3mm
Box of 12 needles
Box of 19 needles
Box of 28 needles
Box of 49 needles
Box of 100 needles
Box of 500 needles
403.1312
403.1319
403.1328
403.1349
453.1310
443.1307
H
Stainless Steel
Available in 3mm flat tip form only, to be used in
applications such as refurbishment of food processing
machinery or areas of high humidity where the corrosive
effect on needles would be prohibitive.
Used on decorative concrete surfaces where contamination of the
surface from carbon steel needle is undesirable.
443.1115
1-800-700-5919
Size
See page 15 for
dust extraction
systems.
•
Size
Description
Part #
3mm
3mm
Box of 100 needles
Box of 500 needles
453.1207
443.1207
Visit our Web site at www.csunitec.com
9
Long-Reach Chisels/Scrapers/Scalers
Chip, scrape and descale
with one versatile tool
CS Unitec’s Trelawny™ Long-Reach Scrapers
feature one tool with multiple applications.
• Available in 2', 4', 5' and 6' lengths
• Three tools in one – chipper, scraper and descaler
• Quick-change chisel release
• Low air consumption
• Standard and "LITE" models
Applications
• Ice
• Residue
• Adhesive
• Asbestos
• Linoleum
• Carpeting
• Plaster
include removal of:
• Mortar
• Floor tiles
• Metal slag
• Rubber coatings
• Roofing materials
• Chemical spillages
• Bituminous products
Chisel Accessories
Chisel
Part No.
Chisel Blade
Length Width
705.1100
9"
705.1101
705.1102
9"
8"
705.1106
705.1112
9"
8"
705.2102
708.1101
8"
1"
Chipping
Applications
Spark-resistant aluminum bronze H
for use in hazardous areas
1"
Flat chisel for sand cast chipping
4"
Asphalt cutter / paint removal /
general chipping applications
2"
Removal of linoleum from floor base
4"
Spark resistant aluminum bronze H
for use in hazardous areas
4"
Floor tile removal
1-1/8"
Brick cleaning and reclamation (use
comb insert with 8" long comb holder 708.1100)
Scraping
Descaling
2"
Scraper Accessories
Scraper
Assembly
Part No.
Blade Blade Applications
Pack Width
Flat
Needle Scaler Accessories
All long-reach scrapers are available as needle
scalers by changing the scraper/chisel with the
needle attachment P/N 415.3532. See page 9
for needles.
439.3504
431.3504 (5 Blades)
431.3508 439.3508
(5 Blades)
Long-Reach Chisels/Scrapers
Model
Description
2ft. Chisel
Standard 4ft. Needle
Scalers 4ft. Chisel
5ft. Chisel
LITE
Scalers
10
4ft. Chisel
5ft. Chisel
6ft. Chisel
Model
No.
Blows CFM Noise
Weight
@ 90 Level
per
(lbs.) minute PSI db(A)
136.3299
137.3400
136.3499
136.3599
8
11
11
12
2200
2200
2200
2200
4.5
4.5
4.5
4.5
84
104
84
86
136.3497
136.3597
136.3697
6.75
7.5
8.5
2200
2200
2200
4.5
4.5
4.5
89
89
84
•
1-800-700-5919
•
431.3512
4"
Adhesive and
paint build up
removal
8"
Paint and
coating
spillage
removal
439.3512
(4 Blades) 12"
Carpet and
tile removal
Beveled
439.3524
431.3904 (5 Blades)
4"
Stubborn
adhesive
removal
439.3528
431.3908 (5 Blades)
8"
Carpet and
tile removal
439.3522
431.3912 (4 Blades) 12"
Visit our Web site at www.csunitec.com
Adhesive
removal
SF11 Steel Deck Hammer
Vibro-Lo™
Vibration Reduction
Technology
11 heads deliver 33,000 BPM
Fracture and reduce scale, corrosion
and thick coatings in minutes – and
reduce blast media costs
CS Unitec's Trelawny™ ScaleForce Eleven Pneumatic Deck
Hammer will fracture and reduce scale, corrosion and thick
coatings in minutes. The machine's low profile body and
adjustable handle mean the deck hammer needs only 6"
clearance for working under pipes and other constructions.
• Includes Vibro-Lo™ vibration reduction technology
• Optional spark resistant beryllium copper replacement heads
to reduce risk of explosion in potentially hazardous areas
• Detachable taper fit cutter head reduces cost of replacement
and extends piston life
• Optional vacuum shroud reduces hazardous and nuisance
dust when used with TVS approved dust collectors
Applications Include:
• Ship Decks
• Tank Bottoms
• Bridge Decks
• Floating Platforms
11 heads provide 33,000 BPM (11 x 3000 BPM)
CS Unitec's Trelawny™
ScaleForce Eleven Pneumatic
Deck Hammer operates with 7x less vibration than
standard models. This tool utilizes vibration damping
components to offset the hammer vibration created
when the heads impact the workpiece.
SF11 Accessories
Part No.
Cruciform Cutter Head
426.5351
Copper Beryllium (CuBe)
Cruciform Cutter Head
606.5303
Bush Cutter Head
426.5352
Common Tapered Piston
612.5301
Vacuum Shroud
437.0100
Cruciform
Bush
Copper Beryllium for use in
potentially explosive areas
H
Optional dust shroud,
P/N 437.0100, to
collect dust and debris
when connected to a
dust collection
vacuum.
See page 15 for air-powered
dust collection vacuum – ATEX
classified for use in Gas Zone 2
and Dust Zone 22.
ScaleForce Eleven (SF11) Pneumatic Deck Hammer
Blows
Cutting
per
Width minute
Noise
CFM @ Level
90 PSI db(A)
Vibration
Levels
m/s2
Model
Number
Weight
(lbs.)
Dimensions
(WxH)
SF11 w/
Cruciform
Heads
159.5910
79
11.1" x 47.6"
10"
33,000
70
113.1
5.76
Vibro-Lo™
SF11
w/ CuBe
Heads
159.5930
79
11.1" x 47.6"
10"
33,000
70
113.1
5.76
Vibro-Lo™
SF11
w/ Dust
Shroud
159.5912
83
11.1" x 47.6"
10"
33,000
70
113.1
5.76
Vibro-Lo™
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
H
11
Floor Scarifiers / Planers
Electric • Pneumatic • Gas
Remove rust, scale, paint, adhesives
and more from steel and concrete
CS Unitec's Trelawny™ Floor Planers tackle the most demanding
surface preparation and material removal applications. Ideal for the
removal of coatings and corrosion from steel and concrete surfaces
to prepare for re-coating. Produce an ideal keyed or grooved profile
on concrete for waterproofing and non-slip surface applications.
• Depth control maximizes performance and extends cutter life
• Integrated vacuum connection and hold-to-run handle
• Fully adjustable handlebar for operator comfort
• Electric, pneumatic or gas power
Applications include:
• Removal of rust,
scale, paint,
adhesives and more
• Keyed or
grooved profiles
• Roughing concrete
TFP 200
Pneumatic
TFP 200
Electric
TFP 200 Cutters
Individual
Cutter
Drum
Assembly
Wire Brushes
N/A
320.9620
Beam Cutters
320.5120
320.1020SB
Star Cutters
320.3658
320.1020SS
Tungsten Carbide Tipped Cutters 320.5500
320.1020ST
Milling Cutters (22mm)
320.5600
320.1020SM
Milling Cutters (11mm)
320.5650
320.1020SM
Tungsten Carbide Tipped Cutters 320.5500
(for grooving)
320.002G
TFP 200
Gas
Cutter Applications:
Wire Brushes are ideal for finish
cleaning and polishing on steel; can
be used for light concrete deposit.
Beam Cutters are ideal for light
paint/corrosion removal, with
minimal damage to substrate.
Star Cutters are ideal for the
removal of mastics and rubberized
coatings.
Tungsten Carbide Tipped Cutters are ideal for aggressive
applications such as roughing concrete and heavy corrosion removal,
as well as grooving roadways for non-slip surface.
Milling Cutters are ideal for the removal of plastic road markings
without penetrating the surface.
TFP 200 Floor Scarifiers
Model Number
Motor Specifications
Max Cutting
Depth per Pass
Cutting
Width
Dimensions
(WxLxH)
Weight
(lbs.)
220V - 240V, 3 HP
1/8"
8"
14" x 35" x 35"
149
165CFM @ 90 PSI, 3.5 HP
1/8"
8"
14" x 35" x 35"
99
Honda GX160 Gas, 5.5 HP
1/8"
8"
14" x 35" x 35"
130
TFP 200 Electric
320.2004T
TFP 200 Pneumatic
320.2012T
TFP 200 Gas
320.2000T
12
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Trident Neptune Flexible Shaft Deck Descalers
Ideal for rapidly removing scale, rust,
paint and other unwanted deposits
CS Unitec's Trelawny™ Trident Neptune Deck Descaler is ideal
for the rapid removal of scale, rust, paint and other unwanted
deposits on ship decks and other metal surfaces, leaving a
receptive surface for priming/painting or coating application.
• Lightweight and portable
• 9' x 5/8" flexible shaft for wide coverage area
• Motor overheat protection on electric models
• Unique non-corrosive D-coupling with positive locking mechanism
• Two-skid base design keeps unit stable and upright; optional swivel base available
Applications Include:
• Removal of scale, rust, paint and other deposits
• Preparation of surfaces for priming, painting or coating
Trident Neptune Deck Descaler Accessories
6-Cutter Scaling Head
Part No: 340.581
ISSA: 55 082 01
Side Plates (2 qty.)
Replacement Cutter Wheel
Parts:
Part No: 340.332 Part No: 340.575/2
ISSA: 55 082 04
IMPA: 59 12 89
ISSA: 55 082 02
IMPA: 59 12 87
Heavy Duty Scaling Head
Replacement Chipping Leaf
Parts:
Part No: 340.347
ISSA: 55 078 06
IMPA: 59 12 79
Cutter Pin
Part No: 340.583
ISSA: 55 082 05
IMPA: 59 12 90
Part No: 340.550
Side Plates (2 qty.)
Part No: 340.551/2
ISSA: 55 078 02
IMPA: 59 12 76
IMPA: 59 12 86
Center Bolt
Part No: 340.581/A
ISSA: 55 082 03
IMPA: 59 12 88
ISSA: 55 078 01
Cutter Pin
Part No: 340.553
ISSA: 55 078 05
IMPA: 59 12 80
IMPA: 59 12 75
Center Bolt
Part No: 340.552
ISSA: 55 078 03
IMPA: 59 12 77
Spacing Washer (50 qty.)
Part No: 340.5849/50
ISSA: 55 078 04
IMPA: 59 12 78
Wire Brushes
6" Power Brush
Part No: 340.160
ISSA: 55 084 03
IMPA: 59 12 93
Center Bolt
Part No: 340.558
ISSA: 55 084 04
IMPA: 59 12 94
6" Twisted Knot Brush
Part No: 340.163
ISSA: 55 084 01
IMPA: 59 12 91
Center Bolt
Part No: 340.559
ISSA: 55 084 02
IMPA: 59 12 92
Crimped Wire Cup Brush
Part No: 340.166
ISSA: 55 084 07
IMPA: 59 12 97
Center Bolt
Part No: 340.557
ISSA: 55 084 06
IMPA: 59 12 96
Twisted Knot Cup Brush
Part No: 340.167
ISSA: 55 084 05
IMPA: 59 12 95
Center Bolt
Part No: 340.557
ISSA: 55 084 06
IMPA: 59 12 96
Flexible Shaft with Handpiece and Coupling
Part No: 340.285
ISSA: 55 077 01
IMPA: 59 12 99
Trident Neptune Deck Descalers
Model
Motor
Specifications
Model
Number
ISSA
Number
IMPA
Number
Cutter
Speed
(RPM)
Weight
(lbs.)
Dimensions
(LxWxH)
Pneumatic
w/ Swivel Base
68 CFM @ 90 PSI
1.5 HP
340.490/S
55.077.00
59 12 81
3000
75
106" x 8.3" x 11.4"
Electric
w/ Swivel Base
110V / .75 HP
220V / .75 HP
110V / .75 HP
220V / .75 HP
340.TN/50/S
340.TN/100/S
340.TN/S/110
340.TN/S/220
55.077.00
55.077.00
55.077.00
55.077.00
59 12 41
59 12 42
59 12 41
59 12 42
2850
3450
2850
3450
75
106" x 8.3" x 11.4"
75
106" x 8.3" x 11.4"
Electric
w/ Skid Base
Standard equipment includes: 9' x 5/8" flexible shaft; heavy-duty leaf scaling head; 6-cutter scaling head; 6" dia. power brush, spanner set and hand guard.
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
13
Hydraflex Hold Cleaning Gun Kit
Specifically designed for hold cleaning on bulk carriers
and cargo vessels of all sizes
The Hydraflex uses a combination of
1
water and compressed air for a powerful,
high-pressure jet of water that can reach
up to 100 ft. away.
• One-man operation
• Constructed of high-quality, non-corrosive
stainless-steel materials to prevent corrosion
• Adjustable air and water pressure control valve
6
2
7
Hydraflex Hold Cleaning Gun Accessories
Item Model
Part No.
ISSA No.
IMPA No.
Weight (lbs.)
1
Gun
342.HY01
55.085.01
59 07 42
12
2
Tripod
342.HY02
55.085.02
59 07 42
21
3
Water Hose Coupling
(2-1/2" x 2-1/2")
342.HY03
–
–
4.3
4
Water Hose Coupling
(2-1/2" x 2")
342.HY04
–
–
0.75
5
Instantaneous Water
Hose Adapter
342.HY05
–
–
0.66
6
Ball Valve
342.HY07
–
–
3.10
7
Base Assembly
342.HY60A
–
–
14.4
Hydraflex Hold Cleaning Gun Kit
Model
Motor
Specifications
Standard
Kit without
Base
70 CFM @ 90 PSI
Model
Number
ISSA
Number
IMPA
Number
Weight
(lbs.)
Recoil
Water Water
Air
Pressure Hose Hose
342.HY50
55.085.00
55 07 00
42
10-18kg
85 psi
2"
3/4"
–
–
52
10-18kg
85 psi
2"
3/4"
(includes items
1, 2, 3, 4 & 5)
Complete
Kit with
Base
70 CFM @ 90 PSI 342.HY50T
(includes items
1, 2, 5 & 6)
14
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Dust Collection Vacuums
Pneumatic • Electric
Air-Powered Dust Collection Vacuum – KAV 30 AIR
Collection of dry dust/debris and non-flammable liquids
ATEX classified; antistatic vacuum and air-supply hose
• Antistatic vacuum and air supply hose
• ATEX classified* Ex II 2 GcT6 for
use in Gas Zone 2 and Dust Zone 22
• Robust stainless steel construction
• Floor tool kit for general cleaning work
• Double filtration with optional 14"
Permaflow filter
• Optional HEPA filter – for collection
of hazardous dust
• Disposable paper filter or reusable
cloth bag for wet use
KAV 30 AIR Vacuum Specifications
Dry Model
Wet/Dry Model
303.10KAV30/D 303.10KAV30/WD
CFM @ 90 PSI
Output flow
Tank capacity
Weight
Paper Filter P/N (10pk.)
HEPA Filter P/N
35
70 CFM
6.8 gal.
32 lbs.
303.1030
303.1060
35
70 CFM
6.8 gal.
32 lbs.
303.1030
303.1060
*ATEX Classified power tools ensure a high level of
safety in Ex zones and hazardous atmospheres.
KAV 30 AIR - Dry Model
Part No. 303.10KAV30/D
KAV 30 AIR - Wet/Dry Model
Part No. 303.10KAV30/WD
Standard equipment includes:
Standard equipment includes:
The ATEX Directive 94/9/EC (ATEX Group-95) was established to
provide technical and quality objectives to control explosive
atmospheres, as well as the standards for equipment and
protective systems used in such areas. Recognized internationally,
tools with ATEX classification provide safety assurances to users
that the product was manufactured to high levels of safety.
Antistatic 38mm tool kit w/
dusting brush (P/N 303.1085/AS)
Antistatic cloth filter (P/N 303.1025/AS)
K6 paper filters (10pk.) (P/N 303.1030)
Antistatic float assembly (P/N 303.1050/AS)
Antistatic 38mm tool kit (P/N 303.1095/AS)
Antistatic cloth filter (P/N 303.1025/AS)
K6 paper filters (10pk.) (P/N 303.1030)
Optional Filters, Bags and Accessories for KAV 30 AIR
Antistatic standard filter assembly (dry use w/paper filter or bag) - P/N 303.1025/AS
Permaflow filter for secondary filtration - P/N 303.1035
Antistatic float assembly for wet use - P/N 303.1050/AS
Disposable, sealable paper bags for waste such as hazardous dust P/N 303.1005 (10-pack)
Four ATEX classification elements are used to ensure equipment
is appropriate for its intended purpose and application.
For more information on these classification elements, as well
as the ATEX Directive and Ex zones, visit www.csunitec.com.
Electric-Powered Dust Collection Vacuums with HEPA Filtration
CS Unitec's wet/dry dust extraction vacuums
offer strong 130 CFM air flow and an
electromagnetic pulse filter cleaning system
to maximize vacuum power and dust collection.
• Ideal for use with power tools
• 99.999% HEPA filtration efficiency of particles
down to 0.3 microns; automatic filter cleaning
• "Power Take Off" outlet activates the vacuum
ON/OFF from the power tool switch
• Non-HEPA models available, 99.930%
filtration efficiency
• Kit available to connect two power
tools (P/N 198804)
(shown at left)
automatically
"pulse" cleans filters
without interrupting
operation!
CS 1225 H
Optional Filter Bags
Paper filter bags for CS 1225 and CS 1445 - P/N 416014 (5-pack)
Plastic filter bags for CS 1225, CS 1445 and CS 1500 - P/N 421742 (5-pack)
Paper filter bags for CS 1500 - P/N 416021 (5-pack)
Slurry filter bags for CS 1500 - P/N 420592 (3-pack)
HEPA Vacuum Specifications
Power
Air flow
Tank capacity
Weight
Filter P/N (2pk.)
"Power
take-off"
outlet
Model CS 1445 H
CS 1225 H
CS 1500 H CS 1445 H
11 Amp
130 CFM
6.6 gal.
24.3 lbs.
428956
11 Amp
130 CFM
13 gal.
35.2 lbs.
428956
Standard Vacuum Specifications
11 Amp
130 CFM
9 gal.
24.3 lbs.
428956
Power
Air flow
Tank capacity
Weight
Filter P/N (2pk.)
CS 1225
CS 1500
CS 1445
11 Amp
130 CFM
6.6 gal.
24.3 lbs.
416069
11 Amp
130 CFM
13 gal.
35.2 lbs.
416069
11 Amp
130 CFM
9 gal.
24.3 lbs.
416069
We make no claim that use of a vacuum will eliminate contaminants. Wear an approved respirator mask and follow all appropriate OSHA safety regulations for
proper ventilation, dust handling, eye protection, etc. when using a dust extraction grinder and vacuum.
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
15
Reamers, Drills & Drive Motors
Air • Electric • Hydraulic
Bridge Reamers, Corner
Drills and Drive Units
Air, electric and hydraulic power for bridge reaming and heavyduty drilling applications in steel and other metals, as well as
tube rolling, tube expanding, tapping, valve turning and more.
Electric Bridge Reamer
EHB 32/2.2 R/RL
AIR
Bridge
Reamer
• Electric bridge reamers and drive units have high torque,
two gears and variable-speed reversible motors
• Air and hydraulic bridge reamers
include self-closing roll throttle
and built-in oiler for motor
Model
EAU 34/4 CB
Model
EAU 36/4
Torque
Load
Weight
Drilling Reaming Tube Output
Speed
Motor Specifications
(in steel)
Model Number
Rolling (ft./lbs.) Arbor (lbs.)
(in steel)
Electric Motor for reaming, drilling and tapping – with torque control
1-1/4"
1-1/4"
60-140 /
200-470
Pneumatic Bridge Reamers / Corner Drills – ATEX Classified for Ex Zones
16.3 Amp / 110V
EHB 32/2.2 R/RL
2"
92
MT3
14
(reversible)
0.7 HP, 21 CFM @ 90 PSI
2 1602 0030
1.8 HP, 49 CFM @ 90 PSI
2 1701 0030
2.6 HP, 63 CFM @ 90 PSI
2 1801 0030
3.0 HP, 63 CFM @ 90 PSI
2 2104 0030 (reversible)
Hydraulic Bridge Reamer / Corner Drill
500
270
260
180
5/8"
7/8"
1-1/4"
2-1/8"
1/2"
5/8"
1"
2"
–
–
–
2"
7
35
53
86
MT1
MT2
MT3
MT4
7
19
25
37
3.8 HP, Oil Pressure
2000 PSI, Oil Flow 4 GPM
220
1-1/4"
1"
–
60
MT3
25
N/A
N/A
N/A
N/A
N/A
N/A
3"
174
203
187
MT3
MT3
MT3
15
19.5
20
2 1806 0010
Electric Drive Units with reverse and variable speeds
ETE 32/2.3 R/RL
EAU 34/4*
EAU 36/4 with 4-speed
16.3 Amp / 110V
20 Amp / 110 V
22 Amp / 110 V
30-230
80-570
50-420
gearbox and variable speed
* EAU 34/4 available with control box (on/off, reverse) – order Model No. EAU 34/4 CB
Woodboring Air Drills – Reversible
Heavy-duty power for underwater drilling and other wood boring applications
• Ideal for drilling wood in marine timbers,
underwater use and railroad repair work
• 1/2" woodboring chuck style
• Thrust bearing support for long life
and efficient operation
• Lever throttle and durable spur gearing
• Includes breast plate and dead handle
• Accessories include 1/2" to 1-1/2" dia.
woodboring drill bits in lengths from 12" to 36"
Model
2 1903 0010
with lever throttle
Up to 1" dia.
Model
2 1924 0010
with self-closing
roll throttle
Up to 2" dia.
Free
Weight
Drilling
Spindle (lbs.)
Speed
Motor Specifications
(in wood)
Model Number
Woodboring Drills – include 1/2" NPT threaded exhaust port
2 1903 0010
2 1924 0010
2 1932 0010
16
2 HP, 39 CFM @ 90 PSI
3 HP, 50 CFM @ 90 PSI
3 HP, 50 CFM @ 90 PSI
•
1"
2"
3"
1-800-700-5919
750 RPM
700 RPM
380 RPM
•
Stub
MT2
MT2
14.5
24.75
24.75
Optional Geared Drill Chuck
Part no. DE-99C
Part no. IBC 22 (MT2)
Part no. IBC 22 (MT2)
Visit our Web site at www.csunitec.com
Portable Beveling Machines
EKF Multipurpose Beveling Machines
Bevel, deburr, chamfer and prepare weld seams faster
and cleaner than angle grinders
• Bevel 30˚, 45˚ or 2.5mm radius on steel, stainless,
nonferrous metals, brass and plastics
• Deburr and chamfer; straighten edges, internal and external
radii; and countersink holes from 7/8" dia.
• Fine adjustment feature for slight chamfers when
deburring for the preparation of weld seams
• Ideal for: Boiler and process plant construction
(prepare weld seams on heat exchangers); Mechanical
engineering (deburr machine parts, chamfer edges to
protect against paint peeling and create visible edges); Sheet
metal (deburr cut edges); Moldmaking (straighten edges,
internal and external radii and countersink holes from 7/8" dia.)
One Machine, Three Milling Options
Three Models:
EKF 300.3 - 30˚
EKF 450.3 - 45˚
EKF 452.3 - 2.5R
Also available:
1.6mm / 0.063"
cutting inserts
(SHM 201).
EKF300.3
Contact us for
Milling cutter 30°,
details.
Chamfer 0 - 1/4"
SKF Beveling Machine
for Plates and Pipes
• Bevel 15˚ to 60˚ angles and land width up to
3/4" on steel, stainless steel, aluminum and
nonferrous metal plates and pipe
• Work on welding angles and weld preparation on
pipes/tubes with a minimum OD of 6-1/4" (160mm) with
built-in pipe roller guide; ideal for beveling pipe 6-1/4" OD
and larger
• Robust design, single operator control and easy handling
• Anti-vibration system for operator comfort
Motor Power
2.5mm radius
45˚
EKF450.3
Milling cutter 45°,
Chamfer 0 - 1/4"
EKF452.3
Milling cutter
2.5mm radius
(0.098")
AutoCUT 500 Automatic
Edge Processing Machine
Fast, easy preparation of
weld seams and bevels
on plate or pipe
Model No.
30˚
Beveling
Angle
Powerful, self-guiding beveling AutoCUT
500
machine for 15˚ to 60˚ edges on
plate up to 1.5" thick
• Bevel 15˚ to 60˚ angles
and land width up to
1-3/16" on steel,
stainless steel,
aluminum and nonferrous
metal plates and pipe
• Unit propels itself on the plate,
no need for a cart or stand
• Automatic feed and return
• Reversible carbide
cutting inserts
SKF
025
Max.
Bevel
Width*
Cutting
Speed
Cutting
Inserts
Qty.
1/4"
3000 SFPM
3
12-1/2" L x 5-1/2" W
x 11-5/8" H
10.5
3/4"
1800 SFPM
10
16-1/2" L x 13" W
43
2750 SFPM
6
23-1/2" L x 24" W
x 20-1/2" H
110
Dimensions
Weight
(lbs.)
EKF Multipurpose Beveling Machines
EKF 300.3
EKF 450.3
EKF 452.3
SKF Beveling
SKF 025
30˚
13.5 Amp/110 V
45˚
13.5 Amp/110 V
2.5mm (0.098")
13.5 Amp/110 V
Machine for Plates and Pipes
10 Amp/110 V
15˚ - 60˚
Continuously Adjustable
AutoCUT 500 Automatic Edge Processing Machine
AutoCUT 500
10 Amp/230 V
3-phase
15˚ - 60˚
1-3/16"
Continuously Adjustable
* Max. bevel width may require several passes, depending on material hardness
•
1-800-700-5919
•
220 V / 50 Hz also available
Visit our Web site at www.csunitec.com
17
Dry Cutting Circular Saws – Electric
Fast, portable, burr-free cutting of metal plates,
pipes, profiles and more… without coolant
Super Hand-Held Dry Cut Saw
Largest
Hand-held
Dry-cutting
Metal Saw
12-5/8" diameter, cut up to 4-3/4" depth
and 3/8" thick steel plate
• Largest portable dry metal cutting saw on the market
• Cut steel, sandwich panels, sheet metal, I-beams, trapezoidal
sheets, conduit, pipes, and more – without coolant
• Side-mounted tilt tray for disposal of chips
Integrated dust
• Motor protection with optical overload indicator
collection port
• Dust collection port
Order No. 608270 U
Motor Power
16 Amp/110V*
Blade Diameter
12-5/8" (320mm)
Max. Depth of Cut
4-3/4" (120mm)
Speed (Free)
1,400 RPM
Arbor Size
1"
Blade Part No.
608276 (12-5/8" dia.)
Blade No. of Teeth
84T
Weight
21 lbs.
* 230V also available – Order No. 608270
Optional blade: P/N 608276TI, 84T, for stainless steel
Blade specially coated, increasing cutting life by 2.5X
Super Hand-Held Accessory: Guide Rail
with Clamping System - 2 x 23 5/8" Rails
(P/N 608275 - shown at right)
8320 SHDC Super Hand-Held Dry
Cut Saw (608270 U) standard
equipment includes a carrying
case and saw blade (P/N 608276).
Ideal for straight cutting of
sandwich panels and sheets, guide
rail and clamping system provides
secure and jam-free guidance of
saw blade through material. Rails
can be used together for straight
edge length up to 47" (1,200mm).
Order No. 608700
Dry Cut Miter Saw – 10" dia.
Precise 45˚ cuts left and right
• Cut tubes, profiles, etc. from steel, stainless,
non-ferrous metal, plastic, composite and
more – no coolant or deburring necessary
• Fine cuts in soft and sensitive materials
• Adjustable saw head for miter cuts of -45˚ to +45˚
• Easy clamping with 3-step quick-release system
• Lightweight and portable at only 42 lbs.
9410 ND Max. Cutting Capacities
Round
Square
Rectangular
90˚ Cut
2.00"
2.00"
3.9" x 2.00"
45˚ Cut
1.25"
1.25"
2.36" x 1.25"
Premium Super Dry Cutter – 14" dia.
6" max. depth of cut
• Cut stainless steel, ferrous and non-ferrous metal,
plastic and aluminum tubes, profiles and more –
no coolant or deburring necessary
• Exclusive blade stabilizing system reduces vibration
• Powerful, high-torque motor for continuous operation
• Patented quick-release vise for precise bevel cuts
Model 9435 Max. Cutting Capacities
Round
Square
Rectangular
90˚ Cut
45˚ Cut
5.5"
4.72"
4.92"
3.15"
4.13" x 6.1" 2.95" x 3.93"
9435 Premium Super Dry Cut Saw (608301) standard
equipment includes saw blade (P/N 600570).
Optional stand available – Order No. 600526
18
•
1-800-700-5919
•
Motor Power
13 Amp/110V*
Blade Diameter
10" (255mm)
Max. Depth of Cut
4" at 90˚
Speed (Free)
1,600 RPM
Arbor Size
1"
Blade Part No.
600598 (10" dia.)
Blade No. of Teeth
60T
Weight of Saw and Stand
42 lbs.
* 230V also available – Order No. 600651
9410 ND standard equipment includes carrying
case and saw blade (P/N 600598).
10" Saw Blades for 9410 ND
P/N 600598, 60T, for mild steel
P/N 600654, 66T, for thin steel
P/N 600654TI, 66T, for stainless steel
Order No. 608301
Motor Power
15 Amp/110V*
Blade Diameter
14" (355mm)
Max. Depth of Cut
6" at 90˚
Speed (Free)
1,600 RPM
Arbor Size
1"
Blade Part No.
600570 (14" dia.)
Blade No. of Teeth
90T
Weight
55 lbs.
* 230V also available – Order No. 600560
14" Saw Blades for Model 9435
P/N 600570, 90T, for stainless and thin steel
P/N 600570SI, 90T, for stainless steel
P/N 600580, 72T, for stainless and medium steel
P/N 600590, 60T, for stainless and thick steel
P/N 600591, 60T, recommended for cast iron
P/N 600595, 66T, recommended for mild steel
P/N 600594, 96T, recommended for aluminum
Visit our Web site at www.csunitec.com
Dry Cutting Circular Saws – Pneumatic
Air power ideal for petrochemical, marine,
demolition and fabrication industries
7-1/2" dia. Heavy-Duty Air Saw
Cut up to 2-1/2" depth at 90˚ and 1-1/2" at 45˚
• Heavy-duty air-powered circular saw, ideal for
wet and dirty conditions
• Pneumatic power eliminates burn out from stalls
• Cuts up to 2-1/2" depth at 90˚
and 1-1/2" depth at 45˚
• 7-1/2" max. blade capacity
• D-handle design with inside trigger and safety
lock button to prevent accidental starting
Standard equipment includes rip fence and
blade wrench. Blade not included.
Order No. 5 1116 0020
Motor Power
Blade Diameter*
Max. Depth of Cut
Speed (Free)
Air Consumption
Air Connection
Vibration
Length
Weight
1.7 HP (1.3 kW)
7-1/2" (190mm)
2-1/2" at 90˚ / 1-1/2" at 45˚
3,200 RPM
53 CFM at 90 PSI
1/2" NPT
<2.5 m/s2
13-1/2"
19 lbs.
* The Model 5 1116 0020 saw also accepts 7-1/4" dia. blades.
9" dia. Air Saw for 90˚ and 45˚ Cuts
Dry cut up to 3-1/4" depth and 3/8" thick steel plate
• Cut steel, non-ferrous metal, plastic,
grating, composite and corrugated
materials
• Cuts at 90˚ and 45˚ angles
• Ideal for petrochemical, marine,
demolition and fabrication applications
• Cuts steel plate up to 3/8" thick
9" diameter
(1" arbor)
Dry Cutting TCT Saw Blades
9" Laser Beam Saw (LBS) ultra-thin
blade for all-purpose use features:
• Thinner than conventional saw blades:
LBS = .055" vs. Std. = .073" thickness
• Shock-resistant, less vibration
• Produces 35% fewer chips
Part No.
Teeth Thickness
722-23060* 60
.055"
Standard
blade .073"
(1.85mm)
thickness
Order No. 5 1115 0020
Motor Power
2 HP (1.5 kW)
Blade Diameter
9"
Max. Depth of Cut
3-1/4" at 90˚ / 2-1/8" at 45˚
Speed (Free)
1,700 RPM
Air Consumption
71 CFM at 90 PSI
Air Connection
1/2" NPT
Vibration
<2.5 m/s2
Weight
19 lbs.
Standard equipment includes an impact-resistant
carrying case and Ultra-thin LBS blade (P/N 722-23060).
Tungsten Carbide-Tipped Dry Cutting Blades
9" dia., .073" thick – for Model 5 1115 0020
P/N 721-23048, 48T, for standard use
P/N 721-23060, 60T, for aluminum
P/N 721-23068, 68T, for thin-wall metal
P/N 721-23084, 84T, for sheet metal
* Standard with Model 5 1115 0020
Pneumatic Metal Saw.
Ultra-thin blade
(P/N 722-23060)
.055" (1.4mm)
thickness
12-5/8" dia. Air Circular Saw
Dry cut up to 4-3/4" depth and 3/8" thick steel plate
• Cut I-beams, 3/8" thick steel plate, insulation boards,
sandwich panels, aluminum, plastics and more
• Suction nozzle and internal chip collector
for clean operation
• D-handle design with inside trigger and safety lock
button to prevent accidental starting
• 12-5/8" max. blade capacity
•
1-800-700-5919
•
Order No. 5 1117 0020
Motor Power
Blade Diameter
Max. Depth of Cut
Speed (Free)
Air Consumption
Air Connection
Vibration
Weight
Visit our Web site at www.csunitec.com
2.4 HP (1.8 kW)
12-5/8"
4-3/4"
1,200 RPM
71 CFM at 90 PSI
1/2" NPT
<2.5 m/s2
24 lbs.
19
Portable Reciprocating Saws
Air • Hydraulic
Hand-held or clamp-on cutting in tough environments
Ideal for a wide range of industries, including subsea, gas utilities, offshore oil,
petrochemical, power generation, industrial plant maintenance and construction
• Fast cutting of pipe, structural steel, bolts, nails, pallets and other material
• The best power-to-weight ratios in the industry; compact size for cutting in confined spaces
• Accessories include wide variety of heavy-duty blades and clamps for 90˚ cuts
The CAT Model 5 1217 0020
AIR
AIR
HYDRAULIC
1.6 HP, Cuts steel pipe and channel
1/2" to 6" dia., plastic pipe to 8" dia.
1.3 HP, Cuts steel pipe and channel
1/2" to 4" dia., plastic pipe to 8" dia.
Model
Number
The SHARK Model 5 1219 0010
The WOLF Model 5 6005 0010
ATEX Classified
90˚
Motor Specifications
2 HP, cuts pipe up to 6" dia., wood up
to 8" dia., metal plate up to 3/4" dia.
Stroke
Length
Strokes
per Minute
Connection
Length
Weight
(lbs.)
1-1/8"
0-1800
1/2" NPT (ID)
15-7/8"
9
1-1/8"
0-2200
1/2" NPT (ID)
17-3/4"
10.75
1700
M 18 x 1.5
Female
The CAT – Pneumatic
1.3 HP, 46CFM @ 90 PSI
5 1217 0020
The WOLF – Pneumatic
5 6005 0010
1.6 HP, 51CFM @ 90 PSI
The SHARK – Hydraulic
5 1219 0010
2 HP, Oil Pressure 2000 PSI,
Oil Flow 6 GPM (up to 13 GPM)
13.2
Low Vibration/Low Air Volume – Compact, Quiet & Reliable
Cut Pipe, Structural Steel, Sheet Metal, Fiberglass, Plastic and More
ATEX Classified
Workhorses for use in the fabrication, shipbuilding, ship repair, oil and petrochemical,
boat building and aircraft maintenance fields, as well as by fire and rescue professionals
• Piston air motors use low air volume while maintaining a cutting speed of
1200 to 2000 strokes per minute
• For use in hazardous areas and around gas and other flammable materials
• Heavy-duty cast steel and aluminum saw bodies; built-in motor lubrication
• Safety STOP/Isolator button disconnects air supply
• Variety of Cengar Air Saw blades available
PL Series
CL Series
Optional inside trigger*
for hand-held use only.
Add FT to Model No.
Model No. Trigger
PL905
CL50
CL75
20
Outside
Outside
Outside
Strokes
per
Motor Stroke
Power Length minute
1 HP
1 HP
1 HP
7/8"
1-3/4"
1-3/4"
•
Dimensions
(LxHxW)
Noise Vibration
Weight CFM @
Level Levels
(lbs.)
90 PSI Connection db(A)
m/s2
2000
113/4" x 51/4" x 15/8"
5.25
4
1/2" NPT ID
69
1.73
1200
153/4"
x
15/8"
5.5
5.75
1/2" NPT ID
83
3.69
1200
153/4"
x
15/8"
5.5
5.75
1/2" NPT ID
83
3.69
1-800-700-5919
x
51/4"
x
51/4"
•
Visit our Web site at www.csunitec.com
Reciprocating Saw Blades & Accessories
Super quick and precise for pipe, steel, plastic, etc.
Extra-thick Blades for 90˚ Cutting with a Pipe Clamp, Double Shank*
Heavy-duty Blades – These blades are much thicker than standard blades and have
a stronger double-tang mount for heavy-duty cutting, either free-hand or with a clamp.
No. 1001
No. 1002
No. 007D/200*
Cuts pipe up to 2"
Cuts pipe up to 4"
Cuts pipe up to 4"
6" L x 1" W x .060" T
8" L x 1" W x .060" T
8" L x 1" W x .050" T
8 TPI
8 TPI
M-Tooth
Ask for special blades to cut stainless steel.
* 007D/200 has universal 1/2" tang
Heavy-duty HSS-Bi-metal Blades for Freehand Sawing, Double Shank
No. 1005 10/14 TPI
No. 1003 10/14 TPI
No. 1004 10/14 TPI
Made of tough, resilient steel with 10/14 variable tooth
pitch. Large blade width and double-shank mount
deliver excellent cutting performance and durability.
6" L x 1" W x .035" T
8" L x 1" W x .035" T
12" L x 1" W x .035" T
Mega Sharp M-Tooth Saw Blades for Freehand Cutting with Standard 1/2" Shank
CUTS 2x FASTER THAN ORDINARY BLADES! M42 Bi-metal for cutting steel and stainless steel
The teeth of the Patented M-Tooth Sawblade cut on the forward and back strokes, saving time.
Metal up to 1/8" Thick
Metal 1/8" and Thicker
No. 006/150
No. 006/200
No. 007/150 M-Tooth 6" L x 3/4" W x .035" T
No. 007/200 M-Tooth 8" L x 3/4" W x .035" T
No. 007/280 M-Tooth 12" L x 3/4" W x .035" T
M-Tooth 6" L x 3/4" W x .035" T
M-Tooth 7" L x 3/4" W x .035" T
Cuts in
Both Directions!
Cengar Air Saw Blades
1 /2 "
Wide Bi-metal Blades
HB300/18
HB300/24
HB300/32
MC220/18
MC220/24
MYN150/18
MYT150/18
Hand
Hand
Hand
Machine
Machine
Notched Yellow
Tapered Yellow
(CL50 / PL905)
18 TPI
24 TPI
32 TPI
18 TPI
24 TPI
18 TPI
18 TPI
12" L
12" L
12" L
83/4" L
83/4" L
6" L
6" L
3/4"
Wide Bi-metal Blades
MB150/18
MB200/10-14
MB200/18
MB200/24
MB250/18
MB250/24
MB300/10-14
MB300/18
Machine
Machine
Machine
Machine
Machine
Machine
Machine
Machine
(CL75)
18 TPI
10/14 TPI
18 TPI
24 TPI
18 TPI
24 TPI
10/14 TPI
18 TPI
6" L
8" L
8" L
8" L
10" L
10" L
12" L
12" L
Hydraulic Power Unit
AirPac Dryer/Cleaner
Model CSAP-2
Model P95
• Removes moisture and dirt
from air lines; a float valve
automatically ejects water
and dirt
• Includes automatic oiler;
protects tools from freezing
in cold environments
Air Tool Lubricant
ProLube-ATL - P/N CS 7043-001 (gallon)
• Eliminates air motor
downtime caused by water
and dirt
• Ideal for use with our
hydraulic power tools.
• Delivers 5 GPM or
8 GPM at 2000 PSI
• Easy to move with lift
and latch handle
• Weighs 330 lbs.
Air Tool Lubricant with Anti-Freeze
ProLube-ATL/AF - P/N CS 7049-001 (gallon)
• Connections for two tools,
max. air flow 185 CFM
Air Tool Line Conditioner/Cleaner
For use in underwater air tools – displaces
moisture and inhibits rust and corrosion of
air motors - P/N MS 9105 (quart)
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
21
Portable Band Saws
Air • Electric • Hydraulic
Fast, on-site cutting of pipe up to 8-1/2" diameter
Cold cutting saws for a wide range of industries, including refineries, chemical
plants, utilities, construction, offshore oil, mining, marine and demolition
Pneumatic AirBand ™ Saws
• Fast, deep, cold cutting of pipe,
conduit, bolts, cable, angle iron,
structural steel, chain and more
• Cut steel, stainless steel, Inconel,
chrome, Hastelloy, aluminum,
copper, iron, fiberglass, plastics,
wood and more
Standard:
Cut 4 3/4" round or 4 1/2" x 4 3/4"
9"
Cutting Capacity
Pneumatic Band Saws
Cutting
Capacity
Model No.
Air
Air Wgt.
Connection Hose
(lbs.)
(ID)
Motor Power
and Specs.
Standard AirBand™ – Aluminum housing
Deep Throat ™:
Cut 7" round or 7" x 7"
Wide Mouth™:
Cut 8
1/2"
round or 9" x 8"
5 6003 0010 43/4" OD / 41/2" x 43/4" 90 PSI @ 20 CFM
Deep Throat™ AirBand
– Stainless
5 6031
0010 Steel housing
1/4"
NPT
3/8"
14
5 6031 0010
90 PSI @ 43 CFM
7" OD / 7" x 7"
Wide Mouth™ AirBand – Stainless Steel housing
1/2"
NPT
1/2"
8
1/2"
NPT
1/2"
35
81/2" OD / 9" x 8"
5 6062 0010
Electric Band Saws
Electric Band Saws
Hydraulic Band Saws
6 Amp, 110VAC
1.6 HP; Oil Flow: 4 GPM @ 2000 PSI
1/2" FF (HTMA) Couplings
Cutting
Wgt.
Model No.
Capacity
(lbs.)
Cutting
Capacity
Model No.
Standard:
Cut 4 3/4" round or 4 1/2" x 4 3/4"
Wgt.
(lbs.)
Standard – Aluminum housing
Standard – Stainless Steel housing
5 6046 0010 43/4" OD / 41/2" x 43/4" 14
Deep Throat™ – Stainless
Steel housing
5 6031 0010
5 6043 0010 43/4" OD / 41/2" x 43/4" 23
Deep Throat™ – Stainless
Steel housing
5 6031 0010
5 6040 0010
28
7" OD / 7" x 7"
Wide Mouth™ – Stainless Steel housing
5 6041 0010
28
7" OD / 7" x 7"
Wide Mouth™ – Stainless Steel housing
5 6079 0020
Deep Throat ™:
90 PSI @ 43 CFM
81/2" OD / 9" x 8"
34
5 6054 0010
81/2" OD / 9" x 8"
35.6
Cut 7" round or 7" x 7"
M42 Cobalt Steel SuperBand™ Saw Blades
Wide Mouth™:
Cut 8 1/2" round or 9" x 8"
Blades for standard saws (Model Nos. 5 6003 0010, 5 6046 0010 and 5 6043 0010)
Hydraulic Band Saws
No. 9 2506 0010
No. 9 2506 0020
18 TPI
Cuts material 1/8" - 1/4" thick
447/8" L x 1/2" W x .025" T
14 TPI
Cuts material 3/16" - 1/2" thick
447/8" L x 1/2" W x .025" T
No. 9 2506 0030
No. 9 2506 0040
10/14 TPI* Cuts material 3/16" - 1/2" thick
8/12 TPI* Cuts material 1/2" and thicker
447/8" L x 1/2" W x .025" T
447/8"
447/8" L x 1/2" W x .025" T
Blades for Deep Throat™ saws (Model Nos. 5 6031 0010, 5 6047 0010 and 5 6041 0010)
No. 9 2506 0220
No. 9 2506 0230
No. 9 2506 0240
No. 9 2506 0200
Standard:
Cut 4 3/4" round or 4 1/2" x 4 3/4"
Deep Throat ™:
No. 9 2506 0350
Wide Mouth™:
Cut 8
22
66" L x 5/8" W x .025" T
66" L x 5/8" W x .025" T
66" L x 5/8" W x .025" T
66" L x
5/8" W
66"
x .025" T
Blades for Wide Mouth™ saws (Model Nos. 5 6062 0010, 5 6099 0020 and 5 6054 0010)
Cut 7" round or 7" x 7"
1/2"
Cuts material 3/16" - 1/2" thick
14 TPI
10/14 TPI* Cuts material 3/16" - 1/2" thick
8/12 TPI* Cuts material 1/2" and thicker
Cuts material 3/4" and thicker
8 TPI
No. 9 2506 0340
No. 9 2506 0330
round or 9" x 8"
•
10/14 TPI* Cuts material 3/16" - 1/2" thick
Cuts material 1/2" and thicker
8/12 TPI
Cuts material 3/4" and thicker
6/10 TPI
1-800-700-5919
•
71" L x 5/8" W x .025" T
71" L x 5/8" W x .025" T
71" L x 5/8" W x .025" T
Visit our Web site at www.csunitec.com
71"
Power Hacksaws
Air • Electric • Hydraulic
Cold cutting of large pipe up to 30" diameter
and structural steel – on site
Ideal for a wide range of industries, including refineries, chemical plants,
utilities, construction, offshore oil, mining, marine and demolition
• Cold cutting of large pipe, structural steel, tanks, profiles and more
• Compact size for cutting in confined spaces
• Accessories include wide variety of heavy-duty blades and clamps for 90˚ cuts
Model 5 1212 0050
Model 5 1220 0050
Model 5 1215 0070
HYDRAULIC
ELECTRIC
AIR
ATEX Classified
Weight
(lbs.)
Strokes
per Min.
Blade
Stroke
5 1212 0010
Air Consumption: 51 CFM
Roll
1.5 HP
Air Pressure: 90 PSI
5 1212 0050
Lever
1.5 HP
Electric – 11 Amps / 110 Volt (Also available as 220 Volt/50 Hz)
100-350
100-350
23/8"
23/8"
1/2"
1/2"
15.4
15.4
5 1215 0070
110V/60 Hz
200-400
23/8"
Cable
13
Oil Flow: 4 GPM at 2000 PSI
100-500
23/8"
1/2"
Model
Number
Motor Specifications
Throttle
Power
Hose
Pneumatic – 3/4" ID NPT Air Connection
Trigger
1.5 HP
Hydraulic – 1/2" FF (HTMA) Couplings
5 1220 0050
Lever
3.8 HP
ID
13.5
Hacksaw Accessories
Hacksaw Blades – 8" to 37" length
Dimensions
Order No.
Z22-9 HSS
Z22-10 HSS
Z22-11 HSS
Z22-6 HSS
Z22-6 HSS-SL*
Z22-31 HSS
Z22-7 HSS
Z22-29 HSS
Z22-33 HSS
Z22-72 HSS
Z22-30 HSS
Z22-30 HSS-SL*
Z22-73 HSS
Z22-74 HSS
Z22-75 HSS
Z22-75 HSS-SL*
Z22-37 HSS
Teeth/
Length Inch
8"
8"
8"
12"
12"
12"
16"
16"
16"
20"
21"
21"
24"
24"
30"
30"
37"
8
16
24
16
16
12
16
8
6
14
12
12
14
8
12
12
12
Hacksaw Clamps and Guide
Thickness
Material
Max.
Dia.
of Cut
1/16"
Steel/Alum.
Steel
Sheet Metal
Steel
Stainless Steel
Steel
Steel
Steel/Alum.
Cast Iron
Steel
Steel
Stainless Steel
Steel
Steel/Alum.
Steel
Stainless Steel
Steel
31/8"
31/8"
31/8"
65/8"
65/8"
65/8"
105/8"
105/8"
105/8"
145/8"
155/8"
155/8"
181/2"
181/2"
247/8"
247/8"
317/8"
1/16"
1/16"
1/16"
1/16"
1/16"
1/16"
1/16"
1/16"
5/64"
1/16"
1/16"
5/64"
5/64"
5/64"
5/64"
5/64"
* Use HSS-SL Blades for best cutting performance on stainless steel and
hard metal. Blades for plastic, wood and masonry also available.
•
1-800-700-5919
•
Model No.
Cutting Dia.
Clamp Type
5 1207 9910
5 1202 9960
5 1207 8910
5 1207 8970
5 1208 9980
2" to 6"
4" to 12 3/4"*
Up to 21"
215/8" x 113/8"
Up to 12 3/4"*
5 1208 9990
Up to 12 3/4"*
Pipe Clamp
Pipe Clamp
Blade Guide
Profile Clamp
Automatic - Self-feeding
Clamp (for pneumatic saws)
Automatic - Self-feeding (for
electric and hydraulic saws)
Model 5 1208 9980 Self-feeding Pipe Clamp
for up to 12 3/4" dia. pneumatic saws*
Model
5 1202 9960
Pipe Clamp for
4" to 12 3/4" dia.*
Model 5 1208 9990 Self-feeding Pipe Clamp for
up to 12 3/4" dia. electric and hydraulic saws*
* Cut up to 30" OD with two extension chains (order 2x P/N 5 1201 9030)
Visit our Web site at www.csunitec.com
23
Chain Saws
Pneumatic • Hydraulic
Pneumatic Chain Saws –
Powerful, efficient cutting of wood and plastic
Used successfully for many years in petrochemical industries, marine
applications, utilities, underground mines and polyethylene plants
Saws available with 10", 15", 17" , 21" and 25" bar lengths
• Pneumatic power is safer than gas or electric in hazardous atmospheres
and wet environments, including underwater applications
• Low maintenance and easy startup – saw chain and motor are
automatically oiled by two separate lubricating systems
• Powerful 4 HP motors at 90 PSI air pressure, 92 CFM
• Standard with .404 pitch Super Chisel saw chain
• Optional carbide-tipped and ripping saw chain available
Series 5 1007
Series 5 1008
Series 5 1026, 5 1027 & 5 1028
Includes exhaust
valve and chain
guard to protect
operator.
Includes chain brake to stop
chain during kickback or
for repositioning
saw during cutting.
Model
Number
Cutting
Capacity
Motor Specifications
Length
with Bar
ATEX Classified
Air
Connection
Hose ID
Weight
(lbs.)
3/8"
5.4
5 1005 Series – Utility Air Chain Saw - Compact, Lightweight and Powerful
1.2 HP, 30 CFM @ 90 PSI
10"
21"
5 1005 0010
5 1007 Series – General Use Air Chain Saw with Chain Guard
4 HP, 92 CFM @ 90 PSI
17"
5 1007 0010
33"
41"
4 HP, 92 CFM @ 90 PSI
25"
5 1007 0040
5 1008 Series – Underwater Air Chain Saw with Chain Guard
4 HP, 92 CFM @ 90 PSI
5 1008 0030
4 HP, 92 CFM @ 90 PSI
5 1008 0040
5 1026 Series – Cutting Wood, with Brake
5 1026 0010
21"
25"
37"
41"
1/4" NPT (ID)
(15", 17", 21" and 25" bar lengths available)
3/4" NPT (ID)
3/4" NPT (ID)
3/4" NPT (ID)
3/4" NPT (ID)
5/8"
5/8"
29
31
5/8"
25
(17", 21" and 25" bar lengths available)
4 HP, 92 CFM @ 90 PSI
17"
4 HP, 92 CFM @ 90 PSI
33"
21"
5 1028 Series – Underwater Air Chain Saw with Brake
5 1028 0040
25
31
(15", 17", 21" and 25" bar lengths available)
3/4" NPT (ID)
5 1027 Series – Cutting Plastic, with Brake and Water Feed System
5 1027 0020
5/8"
5/8"
4 HP, 92 CFM @ 90 PSI
37"
(17", 21" and 25" bar lengths available)
3/4" NPT (ID)
5/8"
28
(17", 21" and 25" bar lengths available)
25"
41"
3/4" NPT (ID)
5/8"
31
Hydraulic Pistol Grip Chain Saws
Ideal for use in utilities, subsea, mines,
construction and agriculture
Model ACH000-12 Pistol Grip Saw
Motor Power
• Up to 6.5 HP, high-torque gear motor
• Open/closed hydraulic system
• 12", 14" and 16" bar lengths available
• Pistol grip with safety trigger lock and
insulated handle
• Optional hose swivel to eliminate
tangled hoses (at left - P/N 640080)
24
•
1-800-700-5919
•
Handle
Overall Length
Bar Length
Weight
Hose Connection
Up to 6.5 HP
Oil Flow: 3-8 GPM @ 2000 PSI
Pistol Grip
23" (with bar)
12" (14" and 16" optional)
5.8 lbs.
3/8" JIC 37˚
For 14" bar, order no. ACH000-14
For 16" bar, order no. ACH000-16
Visit our Web site at www.csunitec.com
Underwater Tools
Hydraulic • Pneumatic
Hydraulic- and pneumatic-powered
tools for use in subsea applications
Grinders - Hydraulic
1 1580 0060 Underwater Hydraulic Horizontal Grinder, 1.3HP, 7000 RPM, Twist throttle,
straight grinding wheels
1 1585 0010 Underwater Hydraulic Angle Grinder, 1.3HP, 5500 RPM, Lever throttle,
grinding wheels up to 7"
1 5080 0020 Underwater Hydraulic Peanut Die Grinder, 1.0 HP,
11,500 RPM, Lever throttle, 1/4" collet
1 2060 0010 Underwater Hydraulic Vertical Grinder, 4.75 HP,
3600 RPM, grinding wheels up to 9"
Rotary Hammer Drills - Hydraulic and Pneumatic
2 2404 0030 Underwater Air Rotary Hammer Drill, SDS Plus, 1" cap. in concrete,
0-3000 BPM, .5 HP, 90 PSI / 21 CFM
2 2417 0010 Underwater Air Rotary Hammer Drill, SDS Max, 2" cap. in concrete,
0-2500 BPM, 1.2 HP, 90 PSI / 21 CFM
2 2406 0010 Underwater Hydraulic Rotary Hammer Drill, SDS Plus, 1" cap. in concrete,
0-3400 BPM, .8 HP
2 2418 0010 Underwater Air Rotary Hammer Drill, SDS Max, 2" cap. in concrete,
2500 BPM, 1.75 HP
Core Drills - Hydraulic and Pneumatic
2 1317 0030 Underwater Hydraulic Core Drill, 3" max. dia., 3.6 HP, 380/900/1800 RPM
2 1335 0010 Underwater Pneumatic Core Drill, 3" max. dia., 3.8 HP, 300/700/1350 RPM
Impact Wrenches - Hydraulic and Pneumatic
ATEX
6 1316 0070 3/4" Air Impact Wrench, 1-1/8" (M 30) max. bolt size,
995 ft-lbs. torque
6 1316 0060 1" Air Impact Wrench, 1-1/8" (M 30) max. bolt size,
995 ft-lbs. torque
6 1515 0010 3/4" Hydraulic Impact Wrench,
1" (M 27) max. bolt size, 1220 ft-lbs. torque
6 1520 0010 1" Hydraulic Impact Wrench,
1-3/8" (M 36) max. bolt size, 1840 ft-lbs. torque
Caution: User must follow all appropriate safety
regulations when choosing a tool for their particular
working environment.
Other Underwater Tools Available:
Woodboring Drills - Pneumatic See page 16
Reciprocating Saws - Hydraulic and Air See page 20
Hacksaws - Hydraulic See page 23
Chain Saws - Air and Hydraulic See page 24
Portable Magnetic Drills - Hydraulic See page 30
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
25
Reduced Sparking Diamond Grinding & Cutting Discs
Ideal for grinding and cutting steel, stainless steel, aluminum,
titanium, fiberglass and other materials
Caution: User must follow all appropriate safety
regulations when choosing a tool for their
particular working environment.
• Last 100x longer than ordinary resin bonded wheels
• Reduce sparks, dust and material waste
• Save time changing discs
Follow all appropriate safety regulations (ATEX,
OSHA, ANSI, etc.) for all grinding applications,
including those for working in hazardous
environments. Follow all appropriate OSHA and
international safety regulations for grinding metal,
fiberglass, hard plastics and more.
EB Cut Off Wheels – "Slicer" for cutting metal and more
Eco Brazing (EB) diamond cutting wheels from CS Unitec are designed for cutting steel
and stainless steel pipe, tubing, bolts and plate, as well as composites, fiberglass and
other materials.
Order No.
Size (dia. x arbor)
Grit
Max. Speed
Quantity
EBC4007850C
EBC4507830C
EBC4507850C
EBC5007850C
4" x 7/8"
4-1/2" x 7/8"
4-1/2" x 7/8"
5" x 7/8"
50
30
50
50
13,000 RPM
13,000 RPM
13,000 RPM
13,000 RPM
1 disc
1 disc
1 disc
1 disc
EBC6007830C
EBC6007850C
EBC7007850C
EBC9007850C
6" x 7/8"
6" x 7/8"
7" x 7/8"
9" x 7/8"
30
50
50
50
8500 RPM
8500 RPM
8500 RPM
8500 RPM
1 disc
1 disc
1 disc
1 disc
EB Combination (Grinding – Cutter) Wheels
Eco Brazing (EB) diamond combination metal grinding and cutting wheels from CS
Unitec are designed for grinding and cutting steel and stainless steel bolts and plate.
Order No.
Size (dia. x arbor)
Grit
Max. Speed
Quantity
EB4007835CM
EB4007850CM
EB4507835CM
EB4507850CM
EB5007835CM
EB5007850CM
4" x 7/8"
4" x 7/8"
4-1/2" x 7/8"
4-1/2" x 7/8"
5" x 7/8"
5" x 7/8"
35
50
35
50
35
50
13,000 RPM
13,000 RPM
13,000 RPM
13,000 RPM
13,000 RPM
13,000 RPM
1 disc
1 disc
1 disc
1 disc
1 disc
1 disc
EB7007835CM
EB7007850CM
7" x 7/8"
7" x 7/8"
35
50
8500 RPM
8500 RPM
1 disc
1 disc
EB Cluster (Cleaning – Grinding) Wheels
Eco Brazing (EB) diamond cluster wheels from CS Unitec are designed for removing
paint, rust and epoxy on metal. Also for high material removal on fiberglass, composites
and plastics without loading up like traditional abrasives.
Order No.
26
Size (dia. x arbor)
Grit
Max. Speed
Quantity
EB4007880CLSF
EB4507880CLSF
EB5007880CLSF
4" x 7/8"
4-1/2" x 7/8"
5" x 7/8"
80
80
80
13,000 RPM
13,000 RPM
13,000 RPM
1 disc
1 disc
1 disc
EB6007880CLSF
EB7007880CLSF
6" x 7/8"
7" x 7/8"
80
80
8500 RPM
8500 RPM
1 disc
1 disc
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Axial Fans and Air Movers
Pneumatic • Electric
Explosion Proof
For use in Ex Zones and
Hazardous Environments.
Electric fan motors are
intrinsically safe, Ex.
Highly efficient, explosion-proof units
for ventilating, exhausting and cooling
Ideal for ship holds, underground mining, shipyards, refineries,
petrochemical plants, oil platforms, power plants, tunneling,
construction and more.
Explosion-Proof Axial Fans
Pneumatic and Electric
12" to 24" diameter
8 1020 Series
Electric Axial Fans with
protective grille on inlet
side, 2118 cfm output
8 1620 0010
7" dia. Pneumatic Air Mover,
2366 cfm output @ 90 psi
Caution: User must follow all
appropriate safety regulations
when choosing a tool for their
particular working environment.
8 1524 0300
24" dia. Pneumatic Axial Fan,
12,353 cfm output @ 90 psi
W70 6" dia. Pneumatic Air Mover
3000 cfm output @ 90 psi
Explosion-Proof Pneumatic Axial Fans and Air Movers
Order No.
Description
Diameter Power
Volume Output
Air Pressure
Weight
dBA
8 1521 0300
8 1522 0300
8 1523 0300
8 1524 0300
8 1603 0300
Axial Fan
Axial Fan
Axial Fan
Axial Fan
Axial Fan
12"
16"
20"
24"
12"
Pneumatic
Pneumatic
Pneumatic
Pneumatic
Pneumatic
3240 cfm
5720 cfm
9170 cfm
12,353 cfm
2119 cfm
90 psi
90 psi
90 psi
90 psi
90 psi
48.5 lbs
70.4 lbs
101.2 lbs
127.6 lbs
28.6 lbs
101
92
90
86
85
W40
W70
8 1620 0010
Air Mover
Air Mover
Air Mover
4"
6"
7"
Pneumatic
Pneumatic
Pneumatic
1140 cfm
3000 cfm
2366 cfm
90 psi
90 psi
90 psi
11 lbs
22 lbs
8 lbs
91
91
104
Explosion-Proof Electric Axial Fans
Order No.
Description
Diameter
Power
Volume Output
Weight
dBA
ATEX Class
12"
12"
12"
12"
12"
230/400 V 50Hz 3-phase
110 V 50 Hz single phase
110 V 50 Hz single phase
110 V 50/60 Hz single phase
230 V 50 Hz single phase
2118 cfm
2118 cfm
2118 cfm
2118 cfm
2118 cfm
44 lbs
45 lbs
45 lbs
45 lbs
45 lbs
86
85
85
85
85
Ex II 2 GcT3
Ex II 2 GcT3
Ex II 2 GcT3
Ex II 2 GcT3
Ex II 2 GcT3
8 1020 0140
Axial Fan
8 1020 0840
Axial Fan
8 1020 0850* Axial Fan
8 1020 0860* Axial Fan
8 1020 0870
Axial Fan
* with switch and cable
Optional Axial Fan Accessories include:
Mounting Flanges for fitting fans to flanged pipes for suction or discharge (shown at right)
Protective Grilles for use on non-ducted fans
Antistatic Items including Connectors, Quick-Seal Couplings and Plastic Ducting
Contact CS Unitec for more information.
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
27
Non-Sparking, Non-Magnetic Safety Hand Tools
For use in Ex Zones, ATEX Zones and Hazardous Environments
where hazardous, flammable or combustible vapors,
liquids, dusts or residues may be present
CS Unitec offers a complete line of High-Quality NonSparking, Non-Magnetic and Corrosion-Resistant
Safety Tools. CS Unitec is a leader in special Copper
Alloy Safety Hand Tools manufactured for use in highrisk areas where a spark can create a disaster.
Choosing the Correct Alloy for Your Application
Copper-Beryllium Tools (CuBe2) help fulfill the demand in the ATEX Directive 94/9/EC for work in
Zones 0, 1 and 2 (Gas, Mists or Vapors); Zones 20, 21 and 22 (Dusts); and M1 and M2 for mining.
Aluminum-Bronze Tools (AlBr) help fulfill the demand in the ATEX Directive 94/9/EC for work in
Zones 1 and 2 (Gas, Mists or Vapors), plus Zones 21 and 22 (Dusts).
Aluminum-Bronze (AlBr) Alloy
Copper-Beryllium (CuBe2) Alloy
Zone Compatibility
Help fulfill demand in ATEX Directive 94/9/EC
for work in Zones 1, 2, 21 and 22
Help fulfill demand in ATEX Directive 94/9/EC
for work in Zones 0, 1, 2, 20, 21 and 22
Hardness
27 HRC
38 HRC
Durability
Not as durable as CuBe.
Very durable due to high hardness and tensile strength.
Magnetic Properties
Low magnetism due to minimal ferrous components.
Appropriate for non-critical non-magnetic applications.
Non-ferrous components; safer for applications
demanding non-magnetic properties.
Composition
Al: 10.3%
Fe: 4.5%
Be: 1.9%
Other: 0.5% max
Co + Ni: 0.4% max Cu: Balance
Ni: 4.5%
Cu: Balance
Other: 0.5% max
Caution: User must follow all appropriate safety regulations when choosing a tool for their particular working environment.
MSDS (Safety Data Sheet) is available upon request.
WARNING: Safety tools should not be used in contact with Acetylene.
WARNING: Safety tools must only be ground or resharpened by companies approved for grinding such material, according to OSHA regulations.
Zone Definitions
Gas, Mists or Vapors
Dusts
■ Zone 0 - An atmosphere where a mixture of air and flammable
substances in the form of gas, vapor or mist is present frequently,
continuously or for long periods.
■ Zone 20 - An atmosphere where a cloud of combustible dust
in the air is present frequently, continuously or for long periods.
■ Zone 1 - An atmosphere where a mixture of air and flammable
substances in the form of gas, vapor or mist is likely to occur in normal
operation occasionally.
■ Zone 2 - An atmosphere where a mixture of air and flammable
substances in the form of gas, vapor or mist is not likely to occur in
normal operation but, if it does occur, will persist for only a short period.
28
•
1-800-700-5919
•
■ Zone 21 - An atmosphere where a cloud of combustible dust
in the air is likely to occur in normal operation occasionally.
■ Zone 22 - An atmosphere where a cloud of combustible
dust in the air is not likely to occur in normal operation but,
if it does occur, will persist for only a short period.
Visit our Web site at www.csunitec.com
Non-Sparking, Non-Magnetic Safety Hand Tools
Ideal for oil drilling platforms, petrochemical plants, oil refineries, natural gas installations, ammunition
plants, varnish factories, sugar refineries, grain silos, mining and other industries where non-sparking
safety tools are required. The non-magnetic feature of these alloys also makes them ideal for working
on special machinery with powerful magnets such as MRI machines, military de-mining and explosives.
Available Non-Sparking, Non-Magnetic Tools Include:
Description
Part#
Description
Angle Tracing Point
Axe
Bars
Crow
Pinch
Brushes
Straight Handle, Scratch
Flat Back, Scratch
Caulking Tool
Chisels
6-Point
8-Point
Bull Point
Ex1302
Ex1201
Pick
Railroad or Clay
Ex1008
Pipe Cutter
Ex1512
Pliers
Adjustable Combination
Ex605
Cutting
Ex603
Diagonal Cutting
Ex601
Diagonal Cutting, Heavy Duty Ex601HD
Flat Nose (DIN ISO 5745)
Ex606
Groove Joint
Ex604
Lineman's, Side Cutting
Ex612
Long-Nose w/Side Cutter
(DIN ISO 5745)
Ex611
Pipe
Ex602
Round Nose (DIN ISO 5745) Ex607
Swedish (DIN 5234)
Ex505
Punches
Center
Ex303
Pin
Ex301P
Rake
Ex1009
Ruler
Ex1601
Saws
Hand
Ex119
Hacksaw Frame
Ex118A
Hacksaw Blade
Ex118B
Scissors
Ex609
Scrapers
Angle
Ex402
Deck
Ex405
Flat
Ex401
Long Blade
Ex407
Plate
Ex406
Triangular
Ex403
Screwdrivers
Offset
Ex802
Phillips
Ex803
Standard
Ex801
Striking
Ex801S
Scriber/Marking Tool
Ex302
Shears, Cutting
Ex608
Shovels
Round Point w/Long Handle Ex1006
Spade, Edging
Ex1007
Square Point w/Long Handle Ex1005
Sockets
1/4" drive
Ex1503AA
3/8" drive
Ex1503A
1/2" drive
Ex1503B
3/4" drive
Ex1503C
1" drive
Ex1503D
Adapter/Converter
Ex1509
Deep Impact, 3/8" drive
Ex1820
Deep Impact, 1/2" drive
Ex1830
Deep Impact, 3/4" drive
Ex1840
Deep Impact, 1" drive
Ex1850
Deep Impact, 1-1/2" drive
Ex1860
Driver Handle
Ex1504S
Extension, Bar
Ex1504
Cape
Chipping Hammer
Clay Spade
Diamond Point
Hand
Paving Breaker
Pneumatic
Scaling
Clamps
C-Type
Grounding
Crate Opener
Drifts
Cylindrical
Pin, Straight Type
Dust Pan
Files
Flat, Bastard
Half Round, Bastard
Round
Flange Spreader
Fork, Garden
Hammers
Ball Peen
Bricklayers'
Claw
Club
Cross Peen Engineers'
Cross Peen,
Engineers'/Blacksmiths'
Cutoff
Double-face Machinists'
Plastic
Scaling
Sledge
Hatchet
Hoe, Planters'/Mixing,
Angled Blade
Knives
Common
Putty/Hand Scraper
Needle, for Air Needle Scalers
Ex1303
Ex1301
Ex1001
Ex1002
Ex308A, Ex308B
Ex304A
Ex304S
Ex306, Ex318R,
Ex320R
Ex305
Ex314
Ex340
Ex307
Ex304
Ex318F, Ex320F
Ex309AH, Ex310AH
Ex312, Ex380SH
Ex901
Ex211
Ex113S
Ex301
Ex301C
Ex1004
Ex411F
Ex411
Ex411R
Ex1102
Ex1010
Ex101U
Ex112U
Ex122U
Ex108U
Ex102U
Ex1041
Ex105U
Ex103U
Ex121
Ex106U
Ex104U
Ex1202
Ex1015
Ex409, Ex410, Ex410S
Ex408
Ex308
The following kits are also available:
5-Piece (Ex2204-Kit)
Allen Wrench (Ex209-Kit)
7-Piece (Ex2206-Kit)
Combination Wrench (Ex206-Kit)
11-Piece (Ex2211-Kit) HazMat (Ex2300-Haz)
24-Piece (Ex2000-Kit) Marine (Ex2200-Kit)
28-Piece (Ex1500-Kit) Screwdriver (Ex801-Kit)
•
Part#
Socket, 1/4" drive, 15-pc. (Ex1520-Kit)
Socket, 1/2" drive, 20-pc. (Ex1530-Kit)
Socket, 1/2" drive, 10-pc. (Ex1535-Kit)
Socket, 3/4" drive, 16-pc. (Ex1540-Kit)
1-800-700-5919
•
Description
Sockets (continued)
Impact, 3/8" drive
Impact, 1/2" drive
Impact, 3/4" drive
Impact, 1" drive
Impact, 1-1/2" drive
Joint, Universal
Offset Grip Handle
Sliding, Bar
Standard Deep, 1/4" drive
Standard Deep, 3/8" drive
Standard Deep, 1/2" drive
Standard Deep, 3/4" drive
Standard Deep, 1" drive
Spatula
Tweezer
Valve Wheel Hook
Vise, Parallel
Wedges
Banana
Flange
Stone
Wrenches
Adjustable End
Allen/Hex Key
(Ball Point, Long Type)
Allen/Hex Key (DIN 911)
Box End (12 pt., DIN 3111)
Box End (6-point)
Box End, Double,
Offset (12-point)
Box End, Double,
Straight Type (12-point)
Box End, Single (12-point)
Box, for Extension
Bung
Chain Pipe
Combination
Construction,
Open End, with Pin
Construction,
Ring End, with Pin
Extension for Box Wrench
Crowfoot
Gas Tube
Handle, Speed
Handle, Hinged
Monkey
Open End
Open End, Double
Pipe (American Type)
Ratchet
Socket, L-Type (6-point)
Socket, T-Type (12-point)
Spanner Adjustable
Spanner, Fixed (DIN 1810)
Striking Box
(12-point, DIN 7444)
Striking Box,
Offset (12-point)
Striking, Open End
Torque
Valve
Valve Wheel (DIN 87311)
Visit our Web site at www.csunitec.com
Part#
Ex1720
Ex1730
Ex1740
Ex1750
Ex1760
Ex1507
Ex1508
Ex1502
Ex1610
Ex1620
Ex1630
Ex1640
Ex1650
Ex408S
Ex610, Ex610S
Ex207F
Ex902
Ex1101BH
Ex1101U
Ex107
Ex501
Ex209L
Ex209
Ex204D
Ex204
Ex202F
Ex202
Ex201
Ex215
Ex110, Ex110ES
Ex110S, Ex213
Ex600
Ex206
Ex205S
Ex204S
Ex216
Ex1514B
Ex212
Ex1505
Ex1506
Ex503
Ex205
Ex203
Ex502
Ex504S, Ex1501S
Ex701
Ex702
Ex208S
Ex208
Ex201B
Ex201F
Ex200
Ex1401TB
Ex207
Ex207S
29
Portable Magnetic Drills
Electric • Pneumatic • Hydraulic
Fast, accurate hole cutting… on the job site or in the shop!
Designed for continuous operation, CS Unitec's portable magnetic drills
are ideal for drilling structural steel and virtually any metal. We offer a
compact, powerful and reliable range of portable magnetic drills for
holes up to 5-1/8" diameter. All CS Unitec drills are heavy-duty for use in
construction and industry.
Cut up to 5-1/8" • Twist Drill up to 1-3/4" • Tap up to 1-5/8"
Unique features of CS Unitec's portable magnetic drill line:
• Variable-speed, multiple-geared models
• Reversible motors for tapping and machining
• Swivel base stand for hard-to-reach areas
• Low-profile, compact for drilling in tight spaces
• Manual or automatic feed
• Lightweight – from 24 lbs.
For a comparison chart of our full line of
portable magnetic drills, see pages 32-33.
MAB 825 & 845
ø 4" cutter capacity
ø 1-1/4" twist drill capacity
ø 1-1/8" tapping capacity
Swivel base (MAB 845)
Reversible, 4-gear motor
MAB 525
ø 2-1/2" cutter capacity
ø 1" twist drill capacity
ø 15/16" tapping capacity
Reversible, 2-gear motor
MAB 1300
ø 5-1/8" cutter capacity
ø 1-3/4" twist drill capacity
ø 1-5/8" tapping capacity
Reversible, 4-gear motor
The ultimate in power
MAB 150
ø 1-1/2" cutter capacity
For drilling in tight spaces
HB-4400
Twist Drilling
Hydraulic power
ø 2-1/16" cutter capacity
ø 1/2" twist drill
Tapping
For marine, construction and
underwater applications
AIRBOR™ AB-4300
Reaming
30
Countersinking
•
Pneumatic power
ø 2-1/16" cutter capacity
ø 1/2" twist drill
ATEX for hazardous environments
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Annular Cutters and Accessories
Annular Cutters for burr-free finished holes,
without predrilling or step drilling
Every annular cutter comes with a corresponding pilot pin included
6-Series HSS Unibroach™ Annular Cutters
Fully ground high-speed steel
Cutting depth:
1"
Drilling ø:
7/16" - 5-1/8"
2"
7/16" - 5-1/8"
3"
3/4" - 5-1/8"
4"
3/4" - 5-1/8"
8-Series ARMOR-PLATED Unibroach™ Annular Cutters
Fully ground high-speed steel with TiAlN hard coating – for higher working temps
Cutting depth:
1"
2"
3"
Drilling ø:
7/16" - 5-1/8" 7/16" - 5-1/8"
3/4" - 5-1/8"
Also available:
9-Series Unibroach™ TCT Hornet Annular Cutters
Sintered carbide with Tungsten Carbide tips
Cutting depth:
1"*
2-3/8"
Drilling ø:
1/2" - 2"
1/2" - 5-1/8"
3-3/8"
3/4" - 5-1/8"
Cobalt Cutters
Large-diameter Cutters
Carbide-tipped Hole Saws
Unibroach® Stack Cutters
* 1-3/8" depth for diameters larger than 1-1/2"
Accessories for hole cutting, twist drilling, tapping and more
Lubricants
Non-toxic ProLube™ Lubricants prolong tool life
by reducing friction and wear
Pilot Pins, Drill Chucks and Tapping Tools
Wide variety for cutting, twist drilling and tapping
Arbors and Extensions
Manual and automatic cooling models, as well as quick-lock, notools arbor; extensions extend cutter reach up to 18"
Drilling Starter Kits
MOBIL CLAMP
Convert magnetic drilling machine to bench drill
Drilling Stand and Vise
Convert hand drill to drill press
Vacuum Plates
For channeled plates and smooth surfaces
Pipe Saddle
Clamp System
Safe, secure drilling of
pipes and tubular material
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
31
Portable Magnetic Drill Comparison Chart
Annular Cutters
Diameter (ø)
MDM 40
MAB 3000
MABasic 200 MABasic 400 MABasic 450 BatteryPowered
MAB 150
MAB 425
MAB 455
MAB 485
MAB 525
MAB 455 SB MAB 485 SB MAB 525 SB
up to
ø 1-1/2"
up to
ø 1-1/4"
up to
ø 1-1/2"
up to
ø 1-5/8"
up to
ø 1-1/8"
up to
ø 1-1/2"
up to
ø 1-3/8"
up to ø 2"
up to
ø 1/2"
up to
ø 5/8"
up to
ø 3/4"
up to
ø 1/2"
Twist Drills
Diameter (ø)
up to ø 2"
up to ø 21/2"
up to ø 5/8" up to ø 7/8" up to ø 7/8" up to ø 1"
Tapping
Diameter (ø)
up to ø
15/16"
up to ø
15/16"
Countersinking
Diameter (ø)
up to ø
1-9/16"
up to ø 2"
Reaming
Diameter (ø)
up to ø 3/4" up to ø 7/8"
Stroke
3-1/8"
5-3/4"
3-1/3"
6-1/3"
5-7/8"
1"
6-1/3"
6-1/3"
6-1/3"
6-1/3"
Weight
24 lbs.
27 lbs.
27 lbs.
29 lbs.
35 lbs.
24 lbs.
29 lbs.
29 lbs.
29 lbs.
35 lbs.
Speed Range 1
(RPM)
440
450
430
250
400
400
430
250
50-250
70-280
760
450
760
450
100-450
180-580
✓
✓
✓
✓
Speed Range 2
(RPM)
Speed Range 3
(RPM)
Speed Range 4
(RPM)
CoolMag
CoolMAG
SafeMag
✓
✓
✓
✓
✓
✓
✓
✓
Set Screw
Quick-change Quick-change Quick-change
keyless
keyless
keyless
System
Electronic Safety
Shutoff Sensor
Tool Holder
Set Screw
✓
✓
✓
Set Screw
Set Screw
Set Screw
Set Screw
Set Screw
MT2
Morse Taper (MT)
MT2
MT2
MT3
Safety Friction
Clutch
✓
Torque Control
Swivel/Adjustable
Base
Magnet Size
32
6-1/2" x
3-1/4"
6-5/8" x
3-1/3"
•
6-5/8" x
3-1/3"
6-5/8" x
3-1/3"
1-800-700-5919
•
6-5/8" x
3-1/3"
6-5/16" x
3-3/16"
6-5/8" x
3-1/3"
✓
✓
✓
6-5/8" x
3-1/3"
6-5/8" x
3-1/3"
7-1/8" x
3-1/2"
Visit our Web site at www.csunitec.com
AutoMAB
1500
AutoMAB
1500 SB
MAB 825
MAB 800 KTS MAB 825 V
MAB 845
MAB 1300
AIRBOR™
HB 4400
CSU 32AC
CSU 32RL
CSU 50AC
CSU 50RL
CSU 80AC
CSU 100/3RL
up to ø
1-1/2"
up to ø
2-3/8"
up to ø 4"
up to ø
5-1/8"
up to ø
2-1/16"
up to ø
2-1/16"
up to ø
1-1/4"
up to ø 2"
up to ø
3-3/16"
up to ø 4"
Max. hole diameter
up to 5-1/8"
up to ø 1"
up to ø
1-1/4"
up to ø
1-3/4"
up to ø 1/2" up to ø 1/2" up to ø 1/2" up to ø 7/8"
up to ø
1-1/4"
up to ø
1-1/4"
Max. twist drilling up
to 1-3/4"
up to ø
1-1/8"
up to ø
1-1/8"
up to ø
1-5/8"
up to ø
1-1/8"
Max. tapping
up to 1-5/8"
up to ø 2"
up to ø 3"
up to ø
1-1/4"
up to ø 2"
up to ø 3/4"
up to ø 15/16"
(CSU 32RL only) (CSU 50RL only)
3"
10"
10"
3.35" (12"
w/out retainer)
up to
10-1/4"
3-3/4"
5-3/4"
5-1/4"
10"
10"
37-1/2 lbs.
99 lbs.
55 lbs.
112 lbs.
43 lbs.
48-1/2 lbs.
24 lbs.
29 lbs.
57 lbs.
57 lbs.
360
40-110
40-110
30-80
400
0-630
450
250
100
40-140
65-175
65-175
50-120
450
175
120-480
140-360
140-360
130-350
245
220-600
220-600
210-550
385
✓
✓
✓
✓
✓
✓
Hydraulic
Allows thread
cutting
✓
✓
✓
✓
✓
✓
Overheating
protection
✓
✓
✓
✓
✓
✓
Magnet adhesion
indicator
✓
✓
✓
✓
✓
✓
Shuts down motor if
magnetic contact lost
Set Screw
Quick-change Quick-change Quick-change
keyless
keyless
keyless
Quick-change
Set Screw
keyless
MT3
Pneumatic
✓
(CSU 32RL only) (CSU 50RL only)
Set Screw
Special
Features
MT3
MT4
✓
✓
✓
✓
✓
✓
✓
7-1/8" x
3-1/2"
8-11/16" x
8-11/16"
8-5/8" x
4-1/3"
Set Screw
Set Screw
✓
MT2
MT3
MT3
✓
✓
✓
Swivel/adjustable
base
14" x 4-3/4"
•
8-3/4" x
3-1/2"
1-800-700-5919
7-1/4" x 3"
•
6-5/16" x
3-1/4"
6-1/2" x
3-1/2"
9" x 4-3/8"
9" x 4"
Visit our Web site at www.csunitec.com
33
Linear Grinders and Pipe Sanders
PTX Eco Smart Linear Grinder
The professional surface finisher for
hard, continuous use
• Multifunctional grinding and polishing system for flat surfaces and open
or closed pipe constructions
• Grind from coarse to shadow-free matte finish, up to a mirror polish
• Remove welds, deep scratches, oxidation and rust
• Ideal for stainless steel, steel and nonferrous metals including
aluminum, brass, bronze and copper, as well as wood and rigid plastic
• Complete line of grinding wheels, belt sleeves, special brushes,
polishing and maintenance abrasives available
Electric or
Pneumatic
PTX Eco Smart Specifications
Order Number 47002A
Grind In Corners!
Power
15 Amp (1710 Watts), 110 V / 60 Hz
(230 V / 60 Hz available)
Variable
Speed
Variable speed control from 1000 to
3800 RPM with tachogenerator for
constant speed, even under load
Speed
Control Dial
Wheel Width
Abrasive mounting system saves time, reduces cost and eliminates
vibration! No-tools changeover of grinding and polishing wheels –
wheels and accessories slide onto the finned, rubber shaft and secure
themselves when machine turns. A wide selection of hollow-core slip-on
abrasives is available for the PTX Eco Smart.
Wheel Dia.
Weight
With fine adjustment for using
abrasives at optimum efficiency
up to 4" (or 6" wide abrasives)
up to 4-1/2"
7.25 lbs. (3.3 kg)
PIPE-MAX Pipe Belt Grinder
Combination pipe belt sander and
grinder for diameters up to 14"
• Sand pipes from small to large diameter, up to 14"
• Follows handrail contours to grind and polish
up to a high-gloss finish
• Remove weld seams from flat surfaces, leaving no edges
• Ideal for stainless steel, aluminum and high-quality metals
• Powerful 15 Amp motor and variable-speed control from 950
to 3500 RPM (3/4HP pneumatic model available)
• Complete line of grinding wheels, belt sleeves, special
brushes, polishing and maintenance abrasives available
Electric or
Pneumatic
PIPE-MAX Specifications
Order Number 38502A
Abrasive grinding, surface conditioning fleece, ceramic
grinding, TZ pyramid and Super Polish belts available.
Exact belt size is 40mm x 780mm (1.5" x 30.7").
Contact CS Unitec for more information.
Power
Belt Size (LxW) 30.7" x 1.6"
Belt Speed
Pipe ø max.
Weight
34
•
1-800-700-5919
•
15 Amp (1710 W) 110V
(220 V also available)
33 - 100 ft./sec.
14"
11.25 lbs.
Visit our Web site at www.csunitec.com
HIPPO Mixing Station and Mixing Drills
Mix, Transport and Pour Directly Onto the Floor!
The PORTAMIX HIPPO features:
• Easy operation – one person can mix, transport
and pour 6 bags or 23 gallons
• Accurately place material directly onto the floor
• Produces excellent mix consistency
• Ideal for mixing and dispensing into 5 gallon containers
• Pre-tinted material is easily blended
• Dust extraction port for vacuum connection
PORTAMIX MEGA HIPPO® Models
PMH 80F-RL
Level Floors w/ Rimless Bucket and Removable Liner
PMH 80X-RL
Rough Terrain w/ Rimless Bucket and Removable Liner
Bowl Capacity:
6 x 50 lbs. mix +water (23 gal /350 lbs.)
5 x 22 kg mix+water (86 liters /160 kg)
Tilting Cradle:
Balanced for easy operation
Control dust
with HEPA
vacuum system
CS 1445 H
Specifications
15 AMP / 110 V*
140 & 470 RPM
23 Gallons
109 lbs.
Power
2-Speeds
Bucket Capacity
Weight
The HIPPO is also available with a Pneumatic-powered Mixing Motor
PMH 80F-AIR; PMH 80X-AIR: 2.2 HP, 90 PSI/67 CFM, 2 speeds (190/420 RPM)
* 220 Volt available
Multiple Batch Mixing with Removable Liner
Mixing multiple batches is easier and faster with the new, removable liner and rimless bucket system.
• Mix consecutive batches without downtime
After mixing the first batch, the liner can be removed and
cleaned. To speed up production, a second liner can be
• Resilient, pliable liner is easily cleaned
used while the first liner is being cleaned. The use of a liner
• Alternating liners prevents cross contamination
also helps to prevent cross contamination and minimizes
• Extends life of bucket
wear to the HIPPO bucket, extending its life.
Professional, Heavy-duty, Hand-held Mixers for Fast, Efficient Mixing
From self-leveling compounds to prefab mortar, CS Unitec has a portable mixer to
do the job quickly. Every CS Unitec mixer has been designed for high reliability, with
the power to provide optimum blending of construction materials on the job site.
Load
Motor
Max.
Speed
Weight Suitable
Power
Paddles
Model No.
(RPM)
Capacity Output (lbs.)
(Amps)
EHR 18 S Set
9.5
0-450
2 bags/
20 gal.
700
lbs./hr.
9
WG 120
MG 120
RG 120
EHR 20.1 R
Set
10.5
250-580
3 bags/
25 gal.
900
lbs./hr.
11.5
WG 135
MG 140
TWP 140
EZR 22 R/RL
Twin Paddle
10.5
0-450
5 bags/
25 gal.
1200
lbs./hr.
15
P/N
31610000
(included)
EHR 23/1.3 R
Set
14.5
100-275
5 bags/
35 gal.
1800
lbs./hr.
15
WG 160
MG 160
TWP 160
EHR
20.1 R
Set
EHR 18 S
Set
Includes
MG 140
paddle
Includes
WG 120
paddle
EHR
23/1.3 R
Set
Includes
MG 160
paddle
Air-Powered Mixers for
Hazardous Environments
Portable
Mixing
Stands
Save time by
running mixers
independently
Model 25GP-WD
Model RST 91
•
1-800-700-5919
CS Unitec offers three airpowered models that
are inherently safer
for mixing paint, glue,
epoxy, mortar, concrete,
refractory cement and other
materials in shipyards and the oil and
gas industries. They can be used
around water with no fear of shock or
blown circuitry. Contact us for details.
•
EZR 22 R/RL
Push-pull Mixer:
Quick, thorough
mixing with twin
paddles and
clockwise/
counterclockwise
rotation
Visit our Web site at www.csunitec.com
35
Also Available from CS Unitec
CS Unitec, Inc. specializes in industrial power tools and safety tools for construction and industry.
Innovation and high quality are synonymous with CS Unitec's power tools. In 1991, the company invented the first pneumatic
portable band saw. CS Unitec has added to its list of industry firsts with the widest range of portable magnetic drills and hand-held
concrete core drills. The line also includes surface preparation tools for metal, concrete and masonry, air, electric and hydraulic
portable band saws, reciprocating saws, hack saws, nut runners, rotary hammer drills, rolling motors, non-sparking safety tools,
portable mixers and dust extraction vacuum systems.
… the power of innovation! ®
For tool specifications and ATEX and Ex Zone
information, visit www.csunitec.com.
View demo videos at
www.csunitec.com
Call 1-800-700-5919 or 203-853-9522 to request
any of the catalogs shown below.
Concrete Tools:
Metalworking Tools:
Portable Mixers:
Portable Saws:
Surface Preparation Tools,
Concrete Grinders, Dust
Collection Systems, Diamond
Core Drills, Air Concrete Saws
and more
Surface Preparation Tools, Dust
Collection Systems, Dry Cutting
Portable Saws, Portable Magnetic
Drills, Bridge Reamers and more
Portable Mixing Machines for
Mortar, Concrete, Plaster,
Flooring Adhesives, Grout,
Coatings, Paint, Self-Leveling
Compounds and more
Hacksaws, Reciprocating Saws,
Band Saws, Chain Saws, Cut-off
Saws and more
ALL PRODUCTS ARE
AVAILABLE THROUGH
EIBENSTOCK’S EXCLUSIVE
AGENT FOR NORTH AMERICA
Portable Magnetic Drills:
Surface Finishing Tools:
Non-Sparking Hand Tools:
Concrete & Masonry Tools:
Magnetic Drills & Accessories
Hand-held Drills and Drive Units
Nut Runners
Hammer Drills and more
High-performance tools and
accessories for grinding, sanding,
polishing, deburring and beveling
stainless steel, steel, nonferrous
metals, wood and more
Non-sparking Hand Tools
Power Tools for use in Ex Zones,
ATEX Zones and Hazardous
Environments
Power tools for the professional
contractor to drill, cut, grind and
smooth concrete, masonry, wood,
drywall and more – includes dust
collection tool systems
CS UNITEC, Inc.
22 Harbor Avenue, Norwalk, CT 06850
Phone 800-700-5919 • 203-853-9522 • Fax 203-853-9921
Email [email protected] • www.csunitec.com
View product demonstrations
at www.csunitec.com.
ALL SPECIFICATIONS ARE SUBJECT TO CHANGE
© Copyright 2014, CS Unitec, Inc., 10-14-7.5M
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement