FRT8120DWR

FRT8120DWR
Hot Water Generation – Steam/Water Double Wall
Flo-Rite-Temp® Steam/Water Shell and Tube Heat Exchanger Pre-Piped Recirculating
Single Temperature
Model FRT8120DWR
Flo-Rite-Temp instantaneous water heater assembly for recirculating
hot water systems. Flo-Rite-Temp pre-piped single temperature
systems offer three heat exchanger options fully assembled
and include: steam trap, air vent, thermometer, Clean-In-Place
connection ports, vacuum breaker, diverting valve, and isolation
valves.
Operational Specifications
• +/-4°F water temperature control at points of use 25’
downstream during demand
• Feed-forward control utilizing pressure sensitive fail safe (cold)
control valve
• Utilizes constant low pressure steam to assure positive
condensate drainage of exchanger
• Only 5 connections required: steam, condensate, cold water,
recirculation return, and mixed water out
• Double wall u-band tube bundle with vent to atmosphere
between tube sheets to indicate tube failure
104.2±2.0
(2647±51)
Technical Specifications
•
•
•
•
•
•
•
•
•
•
Maximum steam pressure: 15 PSIG
Maximum domestic pressure: 150 PSI
Maximum designed water side pressure drop: 10 PSI
Design conditions: Domestic-120 GPM at 100°F delta T using
15 PSIG steam
Complete assembly Lead Free Compliant
All domestic side valve fittings and isolation valves, strainers,
thermostatic diverting valve, inlet check valves, inlet and
system blend thermometers pre-piped.
Clean-In-Place connections for chemically cleaning of control
valve and heat exchanger without disassembly of the Flo-RiteTemp
Heat exchanger tubes shall be double wall wall 5/8” copper
inner tube and 3/4” grooved copper outer tube expanded into
brass/stainless steel tube sheet with indicating weep holes
Water pipe of type L copper
Fabricated carbon steel frame with machine grade enamel
paint
Standard Materials of Construction
•
•
•
•
•
•
•
•
•
50.2±2.0
(1276±51)
34.0
(864)
Control Valve: Lead Free Bronze
Water pipe: Type L Copper
Fittings: Lead Free Brass/Bronze
Tube bundle: Double wall copper with Navel Brass and
stainless steel tube sheets
Heat Exchanger Shell: Carbon Steel
Steam Trap: Model 20JD8 F&T Ductile Iron
Air Vent: Model TS-2 angle-pattern-bronze
Vacuum Breaker: Brass
Thremostatic Diverting Valve: Lead Free Bronze
Designs, materials, weights and performance ratings are approximate and subject to change without notice. Visit armstronginternational.com for up-to-date information.
Armstrong Hot Water Group, 221 Armstrong Blvd., Three Rivers, MI 49093 – USA Phone: 269-279-3602, Fax: 269-279-3130
armstronginternational.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement