Alcatel | OS6850-48 | User manual | Alcatel OS6850-48 User manual

Alcatel-Lucent OmniSwitch 6850
Stackable Gigabit LAN Switch Family
The Alcatel-Lucent OmniSwitch™ 6850
Stackable LAN Switch (SLS) family
addresses the needs of modern
enterprise and triple-play networking
with flexible, configurations; powerover-Ethernet, high availability, firstpacket wire-speed performance, and
dramatically improved network
response time.
2 Alcatel-Lucent | OmniSwitch 6850
Today's enterprise networks require Gigabit Ethernet
switches that are feature-rich, reliable, and capable of
supporting converged applications at low cost of ownership.
The OmniSwitch 6850 series, similar to the existing Alcatel-Lucent OmniSwitch products, uses the
Alcatel-Lucent Operating System (AOS), which ensures an easy and economical way to upgrade or
deploy a new Ethernet network. The flexible configuration options offered by the OmniSwitch 6850
family makes it suitable for a small/medium network in the core or at the edge of a large network.
Also, the OmniSwitch 6850 protects your investment with native support of IPv4 and IPv6 switching.
THE SWITCHES PROVIDE:
■
Choice of PoE (Power-over-Ethernet) and non-PoE models
■
Triple-speed 10/100/1000 interfaces and 10Gig uplinks
■
Fast Ethernet interfaces upgradeable to Gigabit via a software license key without
any network reconfiguration
■
Gigabit fiber interfaces (SFP) supporting 100BaseX, dual-speed and
1000BaseX optical transceivers
■
Stacking capability for virtual chassis redundancy
■
Power supply choice (AC, DC, PoE) for flexible deployment
■
IPv4 and IPv6 layer-2 and layer-3 switching for future-proof investment
■
Advanced quality of service (QoS) to support mission-critical and triple-play applications
This family takes advantage of the extensive security and network management features
provided by the Alcatel-Lucent OmniVista Network Management System (NMS).
THE TARGET APPLICATIONS FOR THESE VERSATILE LAN SWITCHES ARE:
■
Enterprise workgroups for edge deployments / LAN wiring closets
■
L3 aggregation / distribution layer switches in three-tier networks
■
Small enterprise core switching
■
Ethernet access and aggregation for residential / metro
triple-play applications
■
Converged data / voice / video networks
Alcatel-Lucent | OmniSwitch 6850 3
Alcatel-Lucent OmniSwitch 6850 Family
The Alcatel-Lucent OmniSwitch 6850 Stackable LAN switch family offers a variety of PoE and non-PoE
Gigabit and Fast Ethernet models.
The Alcatel-Lucent OmniSwitch 6850Ls, also referred to as the "light" models, are the only
switches on the market that offer the best layer-2/layer-3 features for 10/100 applications that
can be upgraded to Gigabit. They are stackable 10/100 Ethernet workgroup switches built on the
same hardware platform as the OS6850 models. By purchasing and installing an inexpensive
software license key, these switches turn into fully featured 10/100/1000 models.
All models in the Alcatel-Lucent OmniSwitch 6850 family are stackable, fixed configuration chassis in a
1U form factor. They can be optionally equipped with pluggable SFP and XFP transceivers (depending
on the model) that support short, long and very long distances.
DIFFERENCES IN THE OMNISWITCH 6850 MODELS
Chassis
10/100/1000
or Gig
Combo
Port*
10 Gig
Stacking Ports
10 Gig
Uplinks
Power Supplies
Supported
OS6850-24
20 10/100/1000
4
2
-
126W AC or 120W DC
OS6850-24X
20 10/100/1000
4
2
2
126W AC or 120W DC
OS6850-48
44 10/100/1000
4
2
-
126W AC or 120W DC
OS6850-48X
48 10/100/1000
-
2
2
126W AC or 120W DC
OS6850-U24X
22 Gig SFP **
2
2
2
126W AC or 120W DC
OS6850-24L
20 10/100 ***
4
2
-
126W AC or 120W DC
OS6850-48L
44 10/100 ***
4
2
-
126W AC or 120W DC
OS6850-P24
20 10/100/1000
4
2
-
360W AC or 510W AC
OS6850-P24X
20 10/100/1000
4
2
2
360W AC or 510W AC
OS6850-P48
44 10/100/1000
4
2
-
360W AC or 510W AC
OS6850-P48X
48 10/100/1000
-
2
2
360W AC or 510W AC
OS6850-P24L
20 10/100 ***
4
2
-
360W AC or 510W AC
OS6850-P48L
44 10/100 ***
4
2
-
360W AC or 510W AC
Non-PoE Models
PoE Models
* Combo ports are ports individually configurable to be 10/100/1000BaseT or 1000BaseX that can support SFP transceivers for short, long and very long distances.
** Gig fiber interfaces support Gig SFP, dual-speed SFP or 100BaseX SFP optical transceivers.
4 Alcatel-Lucent | OmniSwitch 6850
*** The 10/100 RJ-45 ports can be upgraded to 10/100/1000 speed by purchasing the OS6850-24L-UPGD or OS6850-48L-UPGD software license for 24-port and
48-port models respectively.
Power Options
The OmniSwitch 6850 family offers customers a
vast selection of switches and power options so that
they can prevent over or under provisioning
power to their switches and save money by
not having to purchase more than they need.
All of the OmniSwitch 6850 chassis support
redundant, dual hot-swappable AC, DC or PoE
power supplies.
The primary as well as the backup power supplies
for the OmniSwitch 6850 models are external
and connect to the rear of the unit. A power
shelf provided with the unit, can slide into the
rear of the chassis and is used to hold either two
360W PoE, 126W AC or 120W DC power
supplies or one 510W power supply. For dual
510W configurations, the backup power supply
has to be remotely mounted.
Any power supply can be remotely connected
using a cable enabling rack mounting in the
rack using ears provided with the unit. This
feature allows the OmniSwitch 6850 to be
used in areas with reduced-depth (e.g., a
wall-mounted cabinet).
Non-PoE Models
OS6850-24
OS6850-24X
OS6850-48
OS6850-48X
PoE Models
OS6850-P24
OS6850-P24X
OS6850-P48
OS6850-P48X
Fiber Model
OS6850-U24X
Alcatel-Lucent | OmniSwitch 6850 5
P ro d u c t f e a t u re s a n d b e n e f i t s
ONETOUCH NETWORK MANAGEMENT
The OmniSwitch 6850s are part of Alcatel-Lucent’s OmniSwitch
family – which includes core, stackable / modular edge,
and wireless LAN (WLAN) switches - that uses the AOS and
are managed by the Alcatel-Lucent OmniVista Network
Management System for simplified OneTouch manageability. By
offering the same operating system and network management
system (NMS) across all Alcatel-Lucent platforms, an existing
user is familiar with the product’s management from the very
first day, reducing the cost of ownership by eliminating the time
needed for training on a different operating system or
management solution.
OmniSwitch administrators have three types of management
method interfaces to choose from – a command line interface
(CLI), Alcatel-Lucent WebView for web-based management,
or Alcatel-Lucent OmniVista 2500 and 2700 network
management applications that offer “one touch” point-andclick technology. Regardless of the interface selected, each is
easy to use and offers a common look and feel for every device.
PERFORMANCE
The OmniSwitch 6850 family supports real-time voice, data, and video
applications. The switches provide first packet wire-speed classification and
processing for all packets – giving a noticeable performance boost to
converged enterprise networks. The OS6850s support advanced services such
as 10GigE, PoE and IPv6, future proofing today’s investment to support the
demands of tomorrow.
6 Alcatel-Lucent | OmniSwitch 6850
SECURITY
Alcatel-Lucent’s Access Guardian and OmniVista 2770 Quarantine Manager are components of Alcatel-Lucent’s CrystalSec
security framework that supports all of Alcatel-Lucent’s enterprise networking devices. This framework offers proactive
and reactive security solutions comprised of comprehensive switch-based security capabilities as well as integration with
security applications and appliances from industry leaders.
ALCATEL-LUCENT ACCESS GUARDIAN
Alcatel-Lucent’s Access Guardian is a security framework that enables network-wide
and user-based security by automatically detecting and authenticating the 802.1X
and non-802.1X supplicants connected to a single port, in any combination.
This provides users proactive security by preventing unauthorized network access or restricted access for remediation. In
addition to improved network security, Alcatel-Lucent’s Access Guardian reduces to zero the time a network administrator
spends for adding or moving users.
TRAFFIC ANOMALY DETECTION
Traffic anomaly detection (TAD) is one component of the network security provided by the AOS, which detects network
traffic anomalies and distinguishes malware traffic.
Network traffic anomalies are when traffic patterns in a network do not meet
expectations. TAD detects traffic anomalies by monitoring discrepancies in rates of a
user-port’s ingress and egress packets that match specific traffic patterns.
With an embedded traffic anomaly detection component,
the OmniSwitch 6850 can now:
■
monitor network traffic in real time
■
detect anomalies
■
report anomalies or dynamically quarantine the offending ports
This comes at low computational and deployment costs, since it does not require additional software or hardware to be
installed. TAD prevents the meltdown of the network by detecting and eliminating the impact of worms and other
malicious code at the edge of the network.
ALCATEL-LUCENT OMNIVISTA 2770 QUARANTINE MANAGER
In addition to proactive security provided by Alcatel-Lucent’s Access Guardian, the
Alcatel-Lucent OmniVista 2770 Quarantine Manager provides reactive security by using
alerts from Alcatel-Lucent OmniSwitch and third-party intrusion detection and prevention
systems to identify malicious attacks and then swiftly handling them through
automatic containment and remediation.
Alcatel-Lucent | OmniSwitch 6850 7
P ro d u c t f e a t u re s a n d b e n e f i t s
HIGH AVAILABILITY
The OmniSwitch 6850s virtual chassis minimizes network downtime, reduces
operational complexity and cost and increases availability for mission-critical
applications by removing single points of failure.
The OS6850s resiliency is provided through a superior architecture offering
physical and functional redundancy everywhere:
■
Virtual chassis that provides management functionality and automatic election of
primary and secondary managers
8 Alcatel-Lucent | OmniSwitch 6850
■
Redundant backup power supplies
■
Fault tolerant loop stacking
■
Hot swappable chassis, power supplies, SFPs and XFPs
■
Image rollback to automatically re-load previous configurations and software versions
■
Hitless loading of optional advanced routing software without re-booting
IPV6 SUPPORT
Leading industry analysts, such as
Gartner Group and Burton, have
indicated that IPv6 will be a
requirement for enterprise networks
in the near future. By including it
now, a network manager extends
the life of existing equipment and
prevents future expenses from
upgrading to IPv6.
The OmniSwitch 6850 family
provides full IPv6 support with
hardware-based forwarding for
Flexibility is provided through a
wire-rate speeds, classification
choice of deploying IPv4, IPv6, or
and tunneling to address various
IPv4/IPv6 without compromising
corporate and U.S. federal
switch performance. The OS6850s
government Department of Defense
offer both native IPv6 routing and
(DoD) requirements for IPv6.
extensive support of IPv6 tunneling
mechanisms, including configured,
6-in-4, and ISATAP tunneling.
IPv6 will eventually be a
requirement for enterprise
networks. By including it in
current purchases, a network
manager extends the life of
existing equipment and prevents
future expenses.
Alcatel-Lucent | OmniSwitch 6850 9
Deployment options
GIGABIT AT THE EDGE
The OmniSwitch 6850 series of switches provide a migration path to
Gigabit on the LAN edge where high speed and extensive features are
needed. The OmniSwitch 6850s have the features necessary to provide
intelligent, secure, and available networking for the most demanding
applications and user requirements.
10/100/1,000
L2+/L3 Switching
OmniSwitch 6850
10/100/1,000
L2+/L3 Switching
OmniSwitch 6850
10/100/1,000
L2+/L3 Switching
OmniSwitch 6850
Desktop to Gigabit migration
Supports triple-play application’s
Fiber
PoE
high bandwidth requirements
Cat 5
Core Layer
OmniSwitch 9000
The OmniSwitch 6850s are ideal for use at the edge because of their
compact fixed form factor design suitable for closets. Their modular
expandability, flexible configuration provides an easy path to scale any
workgroup up to 384 10/100/1000 ports and 16 10GigE ports in a single
stack to support campus wiring closet requirements.
The OmniSwitch 6850s support of high power as well as standard
powered PoE ports, copper non-PoE and fiber ports in any combination
in a stack provides exceptional flexibility in customizing the closet/small
core deployment to support applications ranging from just data to
triple-play converged applications.
10 Alcatel-Lucent | OmniSwitch 6850
10/100
Switching
10/100
Switching
Gigabit
Uplinks
Aggregation Layer
10/100/1,000
L2+/L3 Switching
OmniSwitch 6850
Multiple
1Gig
Fiber
PoE
10 Gig
Aggregation Layer
10/100/1,000
L2+/L3 Switching
OmniSwitch 6850
10 Gig
10 Gig
Core Layer
(L3)
Cat 5
L3 Aggregation/Distribution
Provides fiber or copper configuration options
L3 AGGREGATION / DISTRIBUTION
The OmniSwitch 6850 placed in the distribution layer of three-tier networks
provides high capacity, wire speed L2 and L3 switching and intelligent
services near the edge of the network. In addition, some models of the
OmniSwitch 6850 family have four combo ports that are individually
configurable to provide users the choice of copper or fiber.
10/100/1,000
Switching
OmniSwitch 6850
10/100
Switching
10/100
Switching
10/100/1,000
L2+/L3 Switching
OmniSwitch 6850
Server aggregation
Fiber
Features high performance in limited space
PoE
Cat 5
Servers
SERVER AGGREGATION
OS6850’s small form factor, high performance and rich features set make it a
great server aggregation switch, especially for space constrained data centers
where the switch can be installed in the same rack as the servers.
Alcatel-Lucent | OmniSwitch 6850 11
Deployment options
SMALL ENTERPRISE CORE
The OmniSwitch 6850’s high switching capacity makes it a very
capable and cost-effective core switch solution because of its:
10/100
Switching
10/100/1,000
L2+/L3 Switching
OmniSwitch 6850
10/100
Switching
■
High-port density
■
Wire rate at first packet
■
10GigE performance
Servers
■
■
for backbone connections
Fiber
PoE
10/100/1,000
L2+/L3 Switching
OmniSwitch 6850
10/100/1,000
L2+/L3 Switching
OmniSwitch 6850
Cat 5
and backup applications
■
Full support of IPv4/IPv6
16 10GigE ports per full
stacked chassis
providing high throughput
Gigabit
Uplinks
Wire-rate multicast for media
■
Extensive QoS classification
marking queuing and queue
service capabilities
Small enterprise core
Provides first packet, wire-rate performance
RESIDENTIAL / METRO TRIPLE-PLAY ETHERNET ACCESS
Aggregation
IP/MPLS
Ethernet Access
Core
IP/MPLS
The OmniSwitch 6850s are well suited
for residential or metro Ethernet tripleplay access networks, which demand
user-differentiated, high-speed
1 Gig uplink
OS6200
Internet, voice and video services
Alcatel-Lucent 7450
support. In addition to OmniSwitch
OS6850
OS6200
6850 resiliency and high performance,
10 Gig uplink
Alcatel-Lucent 7750
Service Router
OS6200
the AOS offers a number of features
to provide secure access and traffic
Alcatel-Lucent 7450
control for residential deployments.
Also, the OmniSwitch 6850 family is now Metro Ethernet Forum (MEF) 9 and 14 certified
meaning that they are ideal for Metro Access residential and business Ethernet
deployments where the OmniSwitch 6850s are used as customer premises equipment
(CPE) in single or multi-tenant unit (STU/MTU) installations.
12 Alcatel-Lucent | OmniSwitch 6850
Compliancy
1 RoHS-Alcatel-Lucent’s OmniSwitch 6850 family was among the first
hardware devices to be in compliance with the new European
Community's directive – Restriction on Hazardous Substances in
Electrical and Electronic Equipment (RoHS)
2 WEEE (Waste Electrical and Electronic Equipment)
3 NEBS Level 3 Certified for all of the non-PoE models
Service & Support
WARRANTY
Limited lifetime hardware warranty: Limited to the original owner, and will be provided
for up to five years after the product’s End-of-Sales announcement. Faulty parts will be
replaced via a five (5)-business day AVR (Advance Replacement) RMA.
SUPPORT BASIC
One year – 7x24 phone. Includes e-service Web access, software releases, repair and return
of hardware to be completed in 10 business days from receipt.
SUPPORT PLUS
One year – 7x24 phone. Includes e-service Web access, software releases and advanced
shipment for next business day arrival of replacement hardware.
SUPPORT TOTAL (AVAILABLE ONLY IN N. AMERICA)
One year – 7x24 phone. Includes eService Web access, software releases, same day 4-hour
on site hardware replacement (labor and parts) 7 days a week, 24 hours a day. Excludes
NMS and Authentication Services software.
Alcatel-Lucent | OmniSwitch 6850 13
Product Specifications
Features
SIMPLIFIED MANAGEABILITY
• Dual image and dual configuration file
storage provides backup
• Intuitive Alcatel-Lucent CLI with familiar
interface reducing training costs
• Extensive user manuals with examples
• Easy to use, point-and-click web based
element manager (WebView) with built-in
help for easy configuration of new
technology features
• Remote telnet management or secure shell
access using SSH over IPv4 and IPv6
• Secured file upload using SFTP, or SCP
• Human readable ASCII based config files for
offline editing and bulk configuration
• IGMPv1/v2/v3 snooping to optimize
multicast traffic
• BootP/DHCP client allows auto-config of
switch IP information to simplify deployment
• DHCP relay to forward client requests to a
DHCP server
• Auto-negotiating 10/100/1000 ports
automatically configure port speed and
duplex setting
• Auto MDI/MDIX automatically configures
transmit and receive signals to support
straight through and crossover cabling
• SNMPv1/v2/v3
• Integration with SNMP manager AlcatelLucent OmniVista for network wide
management
• Supports RFC 2819 RMON group (1-Statistics,
2-History, 3-Alarm & 9-Events)
• Network Time Protocol (NTP) for network
wide time synchronization
• Alcatel-Lucent Mapping Adjacency Protocol (AMAP)
for building topology maps within OmniVista
• 802.1AB – Link Layer Discovery Protocol with MED
extentions
• Port based mirroring for troubleshooting and
lawful interception, supports four sessions
with multiple sources-to-one destination
configuration
• Policy based mirroring – Allows selection of
the type of traffic to mirror by using QoS
policies
• Remote port mirroring
• Port monitoring feature that allows capture of
Ethernet packets to a file, or for on-screen
display to assist in troubleshooting
• sFlow v5 support to monitor and effectively
control and manage the network usage
• Local (on the flash) and remote logging (Syslog)
• GVRP for 802.1Q-compliant VLAN pruning and
dynamic VLAN creation
• Auto QoS for switch management traffic as
well as traffic from Alcatel-Lucent IP phones
• UDLD for detecting one way connections
HIGH AVAILABILITY
• Ring Rapid Spanning Tree optimized for ring
topology to provide less than 100ms
convergence time
• 802.1w rapid recovery spanning tree allows
subsecond failover to redundant link
• Alcatel-Lucent per-VLAN spanning tree (1x1)
• 802.1D spanning tree for loop free topology
and link redundancy
• 802.1s multiple spanning tree
• Fast forwarding mode on user ports to bypass
30-second delay for spanning tree
• Static and 802.3ad dynamic link aggregation
that supports automatic configuration of link
aggregates with other switches
• Broadcast storm control
• Redundant 1:1 power provided by the
OS6850-BPS
• BPDU blocking – automatically shuts down
switch ports being used as user ports if a
spanning tree BPDU packet is seen. Prevents
unauthorized spanning-tree enabled attached
bridges from operating.
• Priority queues: eight hardware-based queues
per port
CONVERGENCE/ TRIPLE PLAY
• Traffic prioritization: Flow-based QoS with internal
and external (a.k.a., remarking) prioritization
• Bandwidth management: flow based bandwidth
management, ingress policing/egress shaping
and port based egress shaping
• Queue management: Random Early
Detect/Discard (RED), configurable de-queuing
algorithm; Strict Priority, Weighted and Deficit
Round Robin.
• Power-over-Ethernet: IEEE 802.3af – maximum
total power of 380W for PoE
ADVANCED SECURITY
• 802.1X multi-client, multi-VLAN support for
perclient authentication and VLAN assignment
• IEEE 802.1X with group mobility
• IEEE 802.1X with MAC based authentication,
group mobility or “guest” VLAN support
• MAC-based authentication for non-802.1X host
• Authenticated VLAN that challenges users
with username and password and supports
dynamic VLAN access based on user
• Captive Portal – A new Access Guardian Policy
that uses embedded web portal for user
authentication.*
• PKI authentication for SSH access
• Support for host integrity check and
remediation VLAN
• Support for Alcatel-Lucent Quarantine
Manager and quarantine VLAN
• Learned Port Security (LPS) or MAC address
lockdown allows only known devices to have
network access preventing unauthorized
network device access
• RADIUS and LDAP admin authentication
prevents unauthorized switch management
• TACACS+ client allows for authentication
authorization and accounting with a remote
TACACS+ server
• Secure Shell (SSH), Secure Socket Layer (SSL)
for HTTPS access and SNMPv3 for encrypted
remote management communication
• Access control lists to filter out unwanted
traffic including denial of service attacks; Flow
based filtering in hardware (L1-L4)
• Support of Microsoft Network Access
Protection (NAP)**
* Contact for avaliabliity
** NAP will be supported when available.
14 Alcatel-Lucent | OmniSwitch 6850
• Switch protocol security
• MD5 for RIPv2, OSPFv2 and SNMPv3
• SSH for secure CLI session with PKI support
• SSL for secure HTTP session
• DHCP Snooping, DHCP IP Spoof protection
• Enmbedded traffic anomaly detection
• ARP poisoning detection
RESIDENTIAL METRO TRIPLE-PLAY
ETHERNET ACCESS
• DHCP Option 82 – configurable relay agent
information
• QinQ (Vlan stacking)
• Ethernet OAM compliant with 802.1ag version 7.0
L3 ROUTING PROTOCOLS (IPV4)
IP Routing
• Static routing
• RIP v1 & v2
• OSPF v2
• BGP v4
• ISIS
Multicast
• IGMP v1, v2 & v3 snooping
• PIM-SM
• PIM-DM
• DVMRP
Network Protocol
• TCP/IP stack
• ARP
• DHCP relay
• Generic UDP relay per VLAN
Resilience
• VRRP v2
L3 ROUTING PROTOCOLS (IPV6)
IP Routing
Static routing
• RIP ng
• OSPF v3
Multicast
• MLD snooping
• PIM-SM
• PIM-DM
Network protocol
• TCP/IP stack
• DHCP relay (including generic UDP relay)
• ARP
Resilience
• VRRP v3
LAYER-3 ROUTING (IPX)
IP Routing
• Static routing
• RIP/SAP
POWER OVER ETHERNET
• IEEE 802.3af (supported on all POE chassis)
STACKING
• Two 10 Gbps built-in stacking ports to provide fault
tolerant looped stacking configuration
• Stacking capacity: 40 Gbps
COMBO PORTS
• OS6850-24, -24X, -P24, -P24X, - 48, -P48
Four Gigabit Ethernet SFP combo ports
• OS6850-24L, -P24L, - 48L, -P48L
Four Gigabit Ethernet SFP combo ports
• OS6850-U24X
Two Gigabit Ethernet SFP combo ports
10GIGE UPLINKS
OS6850-24X, -P24X, -48X, -P48X and -U24X
• Two built-in XFP ports that support industry
standard XFP-based 10GigE optical
transceivers
•
•
•
•
•
•
•
POWER SUPPLIES AND POWER
CONSUMPTION
Main and backup power supplies are external
either directly connected to the rear of the
unit or remotely mounted
Supports redundant dual hot swappable
power supplies
Power shelf that holds one 510W AC or two
360W AC, 126W AC or120W DC power
supplies
126W (AC) and 120W (DC) power supplies
only used with non-PoE models.
360W (AC) and 510W (DC) power supplies
only used with PoE models.
Maximum power for PoE with 360W power
supply: 230W
Maximum power for PoE with 510W power
supply: 380W
Environmental requirements
OPERATING TEMPERATURE:
• 32° to 113°F (0° to 45°C)
STORAGE TEMPERATURE:
• 14° to 158°F (-10° to 70°C)
HUMIDITY (OPERATING AND STORAGE):
• 5% to 95% non-condensing
Indicators
EMC
PER PORT LEDS
• 10/100/1000: PoE, link/activity
• SFP: link/activity
• XFP: link/activity
• FCC CRF Title 47 Subpart B (Class A limits.
Note: Class A with UTP cables)
• VCCI (Class A limits. Note: Class A with UTP
cables)
• AS/NZS 3548 (Class A limits. Note: Class A
with UTP cables)
• CE marking for European countries (Class A.
Note: Class A with UTP cables)
• EN 55022: 1995 (Emission Standard)
• EN 61000-3-3: 1995
• EN 61000-3-2: 2000
• EN 55024: 1998 (Immunity Standards)
• EN 61000-4-2: 1995+A1: 1998
• EN 61000-4-3: 1996+A1: 1998
• EN 61000-4-4: 1995
• EN 61000-4-5: 1995
• EN 61000-4-6: 1996
• EN 61000-4-8: 1994
• EN 61000-4-11: 1994
• IEEE802.3: Hi-Pot Test (2250 VDC on all
Ethernet ports)
SYSTEM LEDS
• Switch ID (indicates the stack ID of the unit in
the stack: 1 to 7)
• System (OK) (chassis HW/SW status)
• PWR (primary power supply status)
• PRI (virtual chassis primary)
• BPS (backup power status)
Physical Dimensions (WxDxH)
CHASSIS SIZE (WITHOUT POWER SUPPLY
OR PS SHELF)
• 17.32 x 10.63 x 1.73 in (44.0 x 27.0 x 4.4 cm)
TOTAL SIZE INCLUDING POWER
SUPPLY'S SHELF AND MOUNTING EARS
• 19.00 x 17.56 x 1.73 in (48.2 x 44.6 x 4.4 cm)
CHASSIS SIZE (WITH MOUNTING
E A R S, W I T H O U T P OW E R S U P P LY O R
PS SHELF)
• 19 x 10.63 x 1.73 in (48.2 x 27.0 x 4.4 cm)
Safety Agency Certifications
Weight
•
•
•
•
•
CHASSIS WITHOUT THE POWER SUPPLY
OS6850-P24 and -P24L 8.62 lb (3.91kg )
OS6850-P24X
8.86 lb (4.02 kg )
OS6850-P48and -P48L
9.39 lb (4.26kg )
OS6850-P48X
9.59 lb (4.35kg )
OS6850-24 and 24L
8.36 lb (3.79kg )
•
•
•
•
•
POWER SUPPLIES
510W AC
360W AC
126W AC
120W DC
Power supply tray
Product
5.71
3.22
2.45
2.09
1.26
lb
lb
lb
lb
lb
MTFB (hours)
(2.59kg )
(1.46kg )
(1.11kg )
(0.95kg )
(0.57kg )
•
•
•
•
•
•
•
•
•
•
•
US UL 60950
IEC 60950-1:2001; all national deviations
EN 60950-1: 2001; all deviations
CAN/CSA-C22.2 No. 60950-1-03
NOM-019 SCFI, Mexico
AS/NZ TS-001 and 60950:2000, Australia
UL-AR, Argentina
UL-GS Mark, Germany
EN 60825-1 Laser, EN60825-2 Laser
CDRH Laser
China CCC
Power
Consumption*
Heat Dissapation under
full load (Btu/hour)
Acoustic Level
(dB)***
PoE Models
OS6850-P24
153,497
324
279
under 44dB
OS6850-P24X
148,929
327
289
under 44dB
OS6850-P48
128,390
367
517
under 44dB
OS6850-P48X
119,750
387
584
under 44dB
OS6850-24
200,421
55
188
under 44dB
OS6850-24X
191,695
58
198
under 44dB
OS6850-48
162,844
97
331
under 44dB
OS6850-48X
149,608
117
399
under 44dB
OS6850-U24X
207,199
119
406
under 44dB
Non-PoE Models
*Power Consumption for PoE models with 360W Power supply
*** Acoustic Levels measured with a single power supply at room temperature
Alcatel-Lucent | OmniSwitch 6850 15
IEEE Standards
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
IEEE 802.1D (STP)
IEEE 802.1p (CoS)
IEEE 802.1Q (VLANs)
IEEE 802.1QinQ(VLAN stacking)
IEEE 802.1ag (Connectivity Fault
Management)
IEEE 802.1s (MSTP)
IEEE 802.1w (RSTP)
IEEE 802.1X (Port Based Network Access
Protocol)
IEEE 802.3i (10BaseT)
IEEE 802.3u (Fast Ethernet)
IEEE 802.3x (Flow Control)
IEEE 802.3z (Gigabit Ethernet)
IEEE 802.3ab (1000BaseT)
IEEE 802.3ac (VLAN Tagging)
IEEE 802.3ad (Link Aggregation)
IEEE 802.3af (Power-over-Ethernet)
IEEE 802.3ae (10G Ethernet)
•
•
•
•
•
•
OSPF
RFC 1253/1850/2328 OSPF v2 & MIB
RFC 1587/3101 OSPF NSSA Option
RFC 1765 OSPF Database Overflow
RFC 2154 OSPF MD5 Signature
RFC 2370/3630 OSPF Opaque LSA
RFC 3623 OSPF Graceful Restart
•
•
•
•
RIP
RFC
RFC
RFC
RFC
•
•
•
•
•
•
•
•
IP MULTICAST
RFC 1075 DVMRP
RFC 1112 IGMP v1
RFC 2236/2933 IGMP v2 & MIB
RFC 2362 PIM-SM
RFC 2365 Multicast
RFC 2715/2932 Multicast Routing MIB
RFC 2934 PIM MIB for IPv4
RFC 3376 IGMPv3
•
•
•
•
•
•
•
•
IPV6
RFC 3596 DNS for IPv6
RFC 2292/2373/2374/2460/2462 IPv6
RFC 2461 NDP
RFC 2463/2466 ICMP v6 & MIB
RFC 2452/2454 IPv6 TCP/UDP MIB
RFC 2464/2553/2893/3493/3513 IPv6
RFC 3056 IPv6 Tunneling
RFC 3542/3587 IPv6
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
MANAGEABILITY
RFC 854/855 Telnet & Telnet options
RFC 1155/2578-2580 SMI v1 & SMI v2
RFC 1157/2271 SNMP
RFC 1212/2737 MIB & MIB-II
RFC 1213/2011-2013 SNMP v2 MIB
RFC 1215 Convention for SNMP Traps
RFC 1573/2233/2863 Private Interface MIB
RFC 1643/2665 Ethernet MIB
RFC 1901-1908/3416-3418 SNMP v2c
RFC 2096 IP MIB
RFC 2570-2576/3411-3415 SNMP v3
RFC 2616 /2854 HTTP & HTML
RFC 2667 IP Tunneling MIB
RFC 2668/3636 IEEE 802.3 MAU MIB
RFC 2674 VLAN MIB
RFC 4251 Secure Shell Protocol architecture
RFC 4252 The Secure Shell (SSH)
•
•
IETF Standards
IPV4
• RFC 2003 IP/IP tunneling
• RFC 2784 GRE tunneling
BGP
RFC 1269/1657 BGP v3 & v4 MIB
RFC 1403/1745 BGP/OSPF Interaction
RFC 1771-1774/2842/2918/3392 BGP v4
RFC 1965 BGP AS Confederations
RFC 1966 BGP Route Reflection
RFC 1997/1998 BGP Communities Attribute
RFC 2042 BGP New Attribute
RFC 2385 BGP MD5 Signature
RFC 2439 BGP Route Flap Damping
RFC 2545 BGP-4 Multiprotocol Extensions for
IPv6 Inter-Domain Routing
• RFC 2796 BGP Route Reflection
• RFC 2858 Multiprotocol Extensions for BGP-4
• RFC 3065 BGP AS Confederations
•
•
•
•
•
•
•
•
•
•
16 Alcatel-Lucent | OmniSwitch 6850
1058 RIP v1
1722/1723/2453/1724 RIP v2 & MIB
1812/2644 IPv4 Router Requirement
2080 RIPS ng
•
•
•
•
•
SECURITY
RFC 959/2640 FTP
RFC 1321 MD5
RFC 2104 HMAC Message Authentication
RFC 2138/2865/2868/3575/2618
RADIUSAuthentication & Client MIB
RFC 2139/2866/2867/2620 RADIUS
Accounting & Client MIB
RFC 2228 step
RFC 2284 PPP EAP
RFC 2869/2869bis RADIUS Extension
•
•
•
•
QUALITY OF SERVICES
RFC 896 Congestion control
RFC 1122 Internet Hosts
RFC 2474/2475/2597/3168/3246 DiffServ
RFC 3635 Pause Control
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
OTHERS
RFC 791/894/1024/1349 IP & IP / Ethernet
RFC 792 ICMP
RFC 768 UDP
RFC 793/1156 TCP/IP & MIB
RFC 826/903 ARP & Reverse ARP
RFC 919/922 Broadcasting internet datagram
RFC 925/1027 Multi LAN ARP / Proxy ARP
RFC 950 Subnetting
RFC 951 Bootp
RFC 1151 RDP
RFC 1191 Path MTU Discovery
RFC 1256 ICMP Router Discovery
RFC 1305/2030 NTP v3 & Simple NTP
RFC 1493 Bridge MIB
RFC 1518/1519 CIDR
RFC 1541/1542/2131/3396/3442 DHCP
RFC 1757/2819 RMON & MIB
RFC 2131/3046 DHCP/BootP Relay
RFC 2132 DHCP Options
RFC 2251 LDAP v3
RFC 2338/3768/2787 VRRP & MIB
RFC 3060 Policy Core
RFC 3176 sFlow
RFC 3021 Using 31-bit prefixes
•
•
•
•
•
IS-IS
RFC 1142 OSI IS-IS Intra-domain Routing
Protocol
RFC 1195 Use of OSI IS-IS for routing in
TCP/IP & dual environments
RFC 2763 Dynamic Hostname Exchange
RFC 2966 Domain-wide prefix distribution
with two-level IS-IS
RFC 3787 Interoperable IP networks using IS-IS
•
Authentication Protocol
Ordering information
OMNISWITCH 6850 CHASSIS
OS6850-24
OS6850-24D
OS6850-24 chassis w/SSL (DES, 3DES, RC2, RC4) [ECCN 5A002A] L3 Gigabit Ethernet chassis in a 1U form factor with 20 RJ-45
ports individually configurable to 10/100/1000 BaseT, 4 combo ports configurable to be 10/100/1000 BaseT or 1000 BaseX, and
two dedicated stacking ports. A 126W AC or 120W DC power supply respectively is included in the bundle.
OS6850-24X
OS6850-24XD
OS6850-24X chassis w/SSL (DES, 3DES, RC2, RC4) [ECCN 5A002A] L3 Gigabit Ethernet chassis in a 1U form factor with
20 RJ-45 ports individually configurable to 10/100/1000 BaseT, 4 combo ports configurable to be 10/100/1000 BaseT or 1000
BaseX, two 10 Gigabit ports, and two dedicated stacking ports. A 126W AC or 120W DC power supply respectively is included in
the bundle.
OS6850-48
OS6850-48D
OS6850-48 chassis w/SSL (DES, 3DES, RC2, RC4) [ECCN 5A002A] L3 Gigabit Ethernet chassis in a 1U form factor with 44 RJ-45
ports individually configurable to 10/100/1000 BaseT, 4 combo ports configurable to be 10/100/1000 BaseT or 1000 BaseX, and
two dedicated stacking ports. A 126W AC or 120W DC power supply respectively is included in the bundle.
OS6850-48X
OS6850-48XD
OS6850-48XD chassis w/SSL (DES, 3DES, RC2, RC4) [ECCN 5A002A] L3 Gigabit Ethernet chassis in a 1U form factor with 48 RJ-45
ports individually configurable to 10/100/1000 BaseT, two 10 Gigabit ports, and two dedicated stacking ports. A 126W AC or
120W DC power supply respectively is included in the bundle.
OS6850-U24X
OS6850-U24X chassis w/SSL (DES, 3DES, RC2, RC4) [ECCN 5A002A] L3 Gigabit Ethernet chassis in a 1U form factor with 22 1000
Base-X SFP ports, 2 combo ports configurable to be 10/100/1000 BaseT or 1000 BaseX, two 10 Gigabit ports, and two dedicated
stacking ports. A 126W AC or 120W DC power supply respectively is included in the bundle.
OMNISWITCH POE 6850 CHASSIS
OS6850-P24
OS6850-P24H
OS6850-P24 PoE chassis w/SSL (DES, 3DES, RC2, RC4) [ECCN 5A002A]. L3 Gigabit Ethernet chassis in a 1U form factor with 20
RJ-45 PoE ports individually configurable to 10/100/1000 BaseT, 4 combo ports configurable to be 10/100/1000 BaseT or 1000
BaseX, and two dedicated stacking ports. A 360W AC or 510W AC power supply respectively is included in the bundle.
OS6850-P24X
OS6850-P24XH
OS6850-P24X PoE chassis w/SSL (DES, 3DES, RC2, RC4) [ECCN 5A002A] L3 Gigabit Ethernet chassis in a 1U form factor with 20
RJ-45 PoE ports individually configurable to 10/100/1000 BaseT, 4 combo ports configurable to be 10/100/1000 BaseT or 1000
BaseX, two 10 Gigabit ports, and two dedicated stacking ports. A 360W AC or 510W AC power supply respectively is included
in the bundle.
OS6850-P48
OS6850-P48H
OS6850-P48 PoE chassis w/SSL (DES, 3DES, RC2, RC4) [ECCN 5A002A] L3 Gigabit Ethernet chassis in a 1U form factor with 44
RJ-45 PoE ports individually configurable to 10/100/1000 BaseT, 4 combo ports configurable to be 10/100/1000 BaseT or 1000
BaseX, and two dedicated stacking ports. A 360W AC or 510W AC power supply respectively is included in the bundle.
OS6850-P48X
OS6850-P48XH
OS6850-P48X PoE chassis w/SSL (DES, 3DES, RC2, RC4) [ECCN 5A002A] L3 Gigabit Ethernet chassis in a 1U form factor with 48
RJ-45 PoE ports individually configurable to 10/100/1000 BaseT, two 10 Gigabit ports, and two dedicated stacking ports.
A 360W AC or 510W AC power supply respectively is included in the bundle. A 360W AC or 510W AC power supply respectively
is included in the bundle.
OMNISWITCH 6850L CHASSIS
OS6850-24L
OS6850-24LD
OS6850-24L chassis w/SSL (DES, 3DES, RC2, RC4) [ECCN 5A002A] L3 Ethernet chassis in a 1U form factor with 20 RJ-45 ports
individually configurable to 10/100 BaseT, 4 combo ports configurable to be 10/100/1000 BaseT or 1000 BaseX, and two
dedicated stacking ports. The 20 10/100 RJ-45 ports can also operate at Gigabit speed by purchasing the OS6850-24L-UPGD
software license. A 126W AC or 120W DC power supply respectively is included in the bundle
OS6850-48L
OS6850-48LD
OS6850-48L chassis w/SSL (DES, 3DES, RC2, RC4) [ECCN 5A002A] L3 Ethernet chassis in a 1U form factor with 44 RJ-45 ports
individually configurable to 10/100 BaseT, 4 combo ports configurable to be 10/100/1000 BaseT or 1000 BaseX, and two
dedicated stacking ports. The 44 10/100 RJ-45 ports can also operate at Gigabit speed by purchasing the OS6850-48L-UPGD
software license. A 126W AC or 120W DC power supply respectively is included in the bundle.
OMNISWITCH 6850L POE CHASSIS
OS6850-P24L
OS6850-P24LH
OS6850-P24L PoE chassis w/SSL (DES, 3DES, RC2, RC4) [ECCN 5A002A]. L3 Ethernet chassis in a 1U formfactor with 20 RJ-45 PoE
ports individually configurable to 10/100 BaseT, 4 combo ports configurable to be 10/100/1000 BaseT or 1000 BaseX, and two
dedicated stacking ports. The 20 10/100 PoE RJ-45 ports can also operate at Gigabit speed by purchasing the OS6850-24L-UPGD
software license. A 360W AC or 510W AC power supply respectively is included in the bundle.
OS6850-P48L
OS6850-P48LH
OS6850-P48L PoE chassis w/SSL (DES, 3DES, RC2, RC4) [ECCN 5A002A] L3 Ethernet chassis in a 1U form factor with 44 RJ-45 PoE
ports individually configurable to 10/100 BaseT, 4 combo ports configurable to be 10/100/1000 BaseT or 1000 BaseX, and two
dedicated stacking ports. The 44 10/100 PoE RJ-45 ports can also operate at Gigabit speed by purchasing the OS6850-48L-UPGD
software license. A 360W AC or 510W AC power supply respectively is included in the bundle.
Alcatel-Lucent | OmniSwitch 6850 17
Ordering information
POWER SUPPLIES
OS6850-BP-P
OS6850-BP-P modular 360W AC backup power supply. Provides backup power to one PoE switch. Ships with chassis connection
cable, country specific power cord, power shelf and connecting ears.
OS6850-BP-PH
OS6850-BP-PH modular 510W AC backup power supply. Provides backup power to one PoE switch. Ships with chassis connection
cable, country specific power cord, power shelf and connecting ears.
OS6850-BP
OS6850-BP modular 126W AC backup power supply. Provides backup power to one non-PoE switch. Ships with chassis
connection cable, country specific power cord, power shelf and connecting ears.
OS6850-BP-D
OS6850-BP-D modular 120W DC backup power supply. Provides backup power to one non-PoE switch. Ships with chassis
connection cable, power shelf and connecting ears.
10 GIGABIT ETHERNET TRANSCEIVERS (XFP MSA)
XFP-10G-LR
10 Ethernet optical transceiver (XFP MSA). Supports single mode fiber over 1310nm wavelength (nominal) with an LC connector.
Typical reach of 10 Km on 9/125 μm SMF
XFP-10G-SR
10 Gigabit Ethernet optical transceiver (XFP MSA). Supports multimode fiber over 850nm wavelength (nominal) with an LC
connector. Typical reach of 300m on 50/125 μm MMF.
XFP-10G-ER40
Gigabit Ethernet optical transceiver (XFP MSA). Supports single mode fiber over 1550nm wavelength (nominal) with an LC
connector. Typical reach of 40 Km on 9/125 μm SMF.
XFP-10G-ZR80
10 Gigabit Ethernet optical transceiver (XFP MSA). Supports single mode fiber over 1550nm wavelength (nominal) with an LC
connector. Typical reach of 80 Km on 9/125 μm SMF.
GIGABIT ETHERNET TRANSCEIVERS (SFP MSA)
SFP-GIG-EXTND
Extended 1000BaseSX Gigabit Ethernet optical transceiver (SFP MSA). Supports multimode fiber over 850nm wavelength
(nominal) with an LC connector. Reach of up to 2 km (based on grade and condition of fiber) on 62.5/125 μm MMF or 550m on
62.5/125 μm MMF. Requires SFP-GIG-EXTND or GBIC-GIG-EXTND at the remote termination.
SFP-GIG-LH40
1000BaseLH Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over 1310 nm wavelength (nominal)
with an LC connector. Typical reach of 40 Km on 9/125 μm SMF.
SFP-GIG-LH70
1000BaseLH Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over 1550 nm wavelength (nominal)
with an LC connector. Typical reach of 70 Km on 9/125 μm SMF.
SFP-GIG-LX
1000BaseLX Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over 1310nm wavelength (nominal)
with an LC connector. Typical reach of 10 Km on 9/125 μm SMF.
SFP-GIG-SX
1000BaseSX Gigabit Ethernet optical transceiver (SFP MSA). Supports multimode fiber over 850nm wavelength (nominal) with
an LC connector. Typical reach of 300m on 62.5/125 μm MMF or 550m on 50/125 μm MMF.
SFP-GIG-BX-D
1000BaseBX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber
optic on a single strand link up to 10 km. Transmits 1490 nm and receives 1310 nm optical signal.
SFP-GIG-BX-U
1000BaseBX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber
optic on a single strand link up to 10 km. Transmits 1310 nm and receives 1490 nm optical signal.
DUAL SPEED TRANSCEIVERS (SFP MSA)
SFP-DUAL-MM
Dual Speed 100BaseFX or 1000BaseX Ethernet optical transceiver (SFP MSA). Supports multimode fiber over 1310nm
wavelength (nominal) with an LC connector. Typical reach of 550m at Gigabit speed and 2km at 100Mb speed.
Note: at 100Mb speed, this SFP can interoperate with SFP-100-LC-MM or similar transceiver on the other end.
At Gigabit speed, this SFP cannot interoperate with SFP-GIG-SX or similar transceiver on the other end
as it runs over 850nm wavelength).
SFP-DUAL-SM10
Dual Speed 100BaseFX or 1000BaseX Ethernet optical transceiver (SFP MSA). Supports single mode fiber over 1310nm
wavelength (nominal) with an LC connector. Typical reach of 10km at Gigabit speed and 100Mbit speed.
Note: at 100Mbit speed, this SFP can interoperate with SFP-100-LC-SM15 or similar transceiver. At Gigabit speed, this SFP can
interoperate with SFP-GIG-LX or similar transceiver.
18 Alcatel-Lucent | OmniSwitch 6850
Ordering information
100FX TRANSCEIVERS (FOR OS6850-U24X SFP PORTS ONLY)
SFP-100-LC-MM
100BaseFX SFP transceiver with an LC type interface. This transceiver is designed for use over multimode fiber optic cable.
SFP-100-LC-SM15
100BaseFX SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable
up to 15KM.
SFP-100-LC-SM40
100BaseFX SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable
up to 40KM.
SFP-100-BX20LT
100BaseBX SFP transceiver with an SC type interface. This bi-directional transceiver is designed for use over single mode fiber
optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the central office (OLT) transmits
1550nm and receives 1310nm optical signal.
SFP-100-BX20NU
100BaseBX SFP transceiver with an SC type interface. This bi-directional transceiver is designed for use over single mode fiber
optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the client (ONU) transmits 1310nm
and receives 1550nm optical signal.
AUTHENTICATED SERVICES SOFTWARE
OS-SW-SBR-N
[ECCN 5D992] Authentication bundle for Windows w/MD5, RC4, MD4, DES. This bundle provides Funk Software's Steel-Belted
Radius Enterprise Edition for Microsoft Windows and includes an one-year maintenance contract (maintenance releases,
7X24 phone support and e-service web access).
OS-SW-SBR-S
[ECCN 5D992] Authentication Bundle for Solaris w/MD5, RC4, MD4, DES. This bundle provides Funk Software's Steel-Belted
Radius Enterprise Edition for Sun Solaris and includes a one-year maintenance contract (maintenance releases,
7X24 phone support and e-service web access).
ADVANCED ROUTING SOFTWARE
OS6850-SW-AR
OS6850 Advanced Routing software. Includes support for OSPF, BGP, PIM-SM and DVMRP.
UPGRADE SOFTWARE
OS6850-24L-UPGD
Software license that allows 10/100 RJ45 ports of OS6850-24L and OS6850-P24L chassis to operate also at Gigabit speed.
OS6850-48L-UPGD
Software license that allows 10/100 RJ45 ports of OS6850-48L and OS6850-P48L chassis to operate also at Gigabit speed.
Alcatel-Lucent | OmniSwitch 6850 19
Alcatel-Lucent OmniSwitch 6850
Alcatel, Lucent, Alcatel-Lucent and Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other
trademarks are the property of their respective owners. The information presented is subject to
change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
© 2007 Alcatel-Lucent. All rights reserved. P/N 031806-00 Rev. G 01/08
www.alcatel-lucent.com

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project