BLF7G24LS-140,112 datasheet

BLF7G24LS-140,112 datasheet
BLF7G24L-140;
BLF7G24LS-140
Power LDMOS transistor
Rev. 4 — 1 September 2015
Product data sheet
1. Product profile
1.1 General description
140 W LDMOS power transistor for base station applications at frequencies from
2300 MHz to 2400 MHz.
Table 1.
Typical performance
Typical RF performance at Tcase = 25 C in a common source class-AB production test circuit.
f
IDq
VDS
PL(AV)
Gp
D
ACPR885k ACPR5M
(MHz)
(mA)
(V)
(W)
(dB)
(%)
(dBc)
IS-95
2300 to 2400 1300
28
30
18.5
26.5 45[1]
1 carrier W-CDMA
2300 to 2400 1300
28
50
18.5
33
Mode of operation
[1]
-
(dBc)
35[2]
Single carrier IS-95 with pilot, paging, sync and 6 traffic channels (Walsh codes 8 - 13). PAR = 9.7 dB at
0.01 % probability on the CCDF. Channel bandwidth is 1.2288 MHz.
[2]
3GPP; test model 1; 64 DPCH; PAR = 7.2 dB at 0.01 % probability on CCDF. Channel bandwidth is 3.84
MHz.
1.2 Features and benefits







Excellent ruggedness
High efficiency
Low Rth providing excellent thermal stability
Designed for low memory effects providing excellent digital pre-distortion capability
Internally matched for ease of use
Integrated ESD protection
Compliant to Directive 2002/95/EC, regarding Restriction of Hazardous Substances
(RoHS)
1.3 Applications
 RF power amplifiers for base stations and multi carrier applications in the 2300 MHz to
2400 MHz frequency range
BLF7G24L-140; BLF7G24LS-140
Power LDMOS transistor
2. Pinning information
Table 2.
Pinning
Pin
Description
Simplified outline
Graphic symbol
BLF7G24L-140 (SOT502A)
1
drain
2
gate
3
source
1
1
3
[1]
2
2
3
sym112
BLF7G24LS-140 (SOT502B)
1
drain
2
gate
3
source
1
1
3
[1]
2
2
3
sym112
[1]
Connected to flange.
3. Ordering information
Table 3.
Ordering information
Type number
Package
Name Description
Version
BLF7G24L-140
-
flanged LDMOST ceramic package; 2 mounting holes;
2 leads
SOT502A
BLF7G24LS-140
-
earless flanged LDMOST ceramic package; 2 leads
SOT502B
4. Limiting values
Table 4.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Min
Max
Unit
VDS
drain-source voltage
Conditions
-
65
V
VGS
gate-source voltage
0.5
+13
V
ID
drain current
-
28
A
Tstg
storage temperature
65
+150
C
Tj
junction temperature
-
200
C
5. Thermal characteristics
Table 5.
Thermal characteristics
Symbol
Parameter
Conditions
Typ
Unit
Rth(j-c)
thermal resistance from junction to case
Tcase = 80 C; PL = 125 W
0.28
K/W
BLF7G24L-140_7G24LS-140#4
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
2 of 14
BLF7G24L-140; BLF7G24LS-140
Power LDMOS transistor
6. Characteristics
Table 6.
Characteristics
Tj = 25 C unless otherwise specified.
Symbol Parameter
Conditions
V(BR)DSS drain-source breakdown voltage
Min Typ
Max Unit
VGS = 0 V; ID = 1 mA
65
-
-
V
VGS(th)
gate-source threshold voltage
VDS = 10 V; ID = 216 mA
1.5
1.8
2.3
V
IDSS
drain leakage current
VGS = 0 V; VDS = 28 V
-
-
5
A
IDSX
drain cut-off current
VGS = VGS(th) + 3.75 V;
VDS = 10 V
34
42
-
A
IGSS
gate leakage current
VGS = 11 V; VDS = 0 V
-
-
500
nA
gfs
forward transconductance
VDS = 10 V; ID = 216 mA
-
1.87
-
S
RDS(on)
drain-source on-state resistance
VGS = VGS(th) + 3.75 V;
ID = 7.56 A
-
69
-
m
7. Test information
Remark: All testing performed in a class-AB production test circuit.
Table 7.
Functional test information
Mode of operation: 1-carrier N-CDMA, single carrier IS-95 with pilot, paging, sync and 6 traffic
channels (Walsh codes 8 - 13). PAR = 9.7 dB at 0.01 % probability on the CCDF, channel bandwidth
is 1.2288 MHz; f1 = 2300 MHz; f2 = 2400 MHz; RF performance at VDS = 28 V; IDq = 1300 mA;
Tcase = 25 C; unless otherwise specified.
Symbol
Parameter
Conditions
Min Typ Max Unit
PL(AV)
average output power
-
-
W
Gp
power gain
17.5 18.5 -
dB
RLin
input return loss
-
12 -
dB
D
drain efficiency
23
26.5 -
%
ACPR885k
adjacent channel power ratio (885 kHz)
-
45 40
dBc
30
7.1 Ruggedness in class-AB operation
The BLF7G24L-140 and BLF7G24LS-140 are capable of withstanding a load mismatch
corresponding to VSWR = 10 : 1 through all phases under the following conditions:
VDS = 28 V; IDq = 1300 mA; PL = 140 W (CW); f = 2300 MHz.
BLF7G24L-140_7G24LS-140#4
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
3 of 14
BLF7G24L-140; BLF7G24LS-140
Power LDMOS transistor
7.2 Single carrier IS-95
Single carrier IS-95 with pilot, paging, sync and 6 traffic channels (Walsh codes 8 - 13).
PAR = 9.7 dB at 0.01 % probability on the CCDF. Channel bandwidth is 1.2288 MHz
001aan523
19
001aan524
50
ηD
(%)
Gp
(dB)
40
(1)
18.5
(2)
30
18
(2)
(1)
20
17.5
10
0
17
0
20
40
60
80
100
PL (W)
0
VDS = 28 V; IDq = 1300 mA.
40
60
80
100
PL (W)
VDS = 28 V; IDq = 1300 mA.
(1) f = 2300 MHz
(1) f = 2300 MHz
(2) f = 2400 MHz
Fig 1.
20
(2) f = 2400 MHz
Single carrier IS-95 power gain as a function of
load power; typical values
001aan525
−30
APCR855
(dBc)
(2)
−40
(1)
Fig 2.
Single carrier IS-95 drain efficiency as a
function of load power; typical values
001aan526
−40
APCR1980
(dBc)
−50
(2)
−50
−60
−60
−70
−70
0
20
40
60
80
100
PL (W)
−80
VDS = 28 V; IDq = 1300 mA.
(1)
0
20
60
80
100
PL (W)
VDS = 28 V; IDq = 1300 mA.
(1) f = 2300 MHz
(1) f = 2300 MHz
(2) f = 2400 MHz
(2) f = 2400 MHz
Fig 3.
40
Single carrier IS-95 ACPR at 885 kHz as a
function of load power; typical values
Fig 4.
Single carrier IS-95 ACPR at 1980 kHz as a
function of load power; typical values
BLF7G24L-140_7G24LS-140#4
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
4 of 14
BLF7G24L-140; BLF7G24LS-140
Power LDMOS transistor
001aan527
12
001aan528
250
PL(M)
(W)
PAR
(dB)
(1)
200
(2)
8
(1)
150
(2)
100
4
50
0
0
0
20
40
60
80
100
PL (W)
0
VDS = 28 V; IDq = 1300 mA.
20
60
80
100
PL (W)
VDS = 28 V; IDq = 1300 mA.
(1) f = 2300 MHz
(1) f = 2300 MHz
(2) f = 2400 MHz
(2) f = 2400 MHz
Fig 5.
40
Single carrier IS-95 peak-to-average power
ratio as a function of load power;
typical values
Fig 6.
Single carrier IS-95 peak power as a function
of load power; typical values
BLF7G24L-140_7G24LS-140#4
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
5 of 14
BLF7G24L-140; BLF7G24LS-140
Power LDMOS transistor
7.3 Pulsed CW
001aan529
19.5
Gp
(dB)
001aan530
50
ηD
(%)
(2)
(1)
40
18.5
(2)
(1)
30
17.5
20
16.5
10
0
40
80
120
160
200
PL (W)
0
VDS = 28 V; IDq = 1300 mA.
40
120
160
200
PL (W)
VDS = 28 V; IDq = 1300 mA.
(1) f = 2300 MHz
(1) f = 2300 MHz
(2) f = 2400 MHz
(2) f = 2400 MHz
Fig 7.
80
Pulsed CW power gain as a function of load
power; typical values
Fig 8.
Pulsed CW drain efficiency as a function of
load power; typical values
BLF7G24L-140_7G24LS-140#4
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
6 of 14
BLF7G24L-140; BLF7G24LS-140
Power LDMOS transistor
7.4 Single carrier W-CDMA
3GPP; test model 1; 64 DPCH; PAR = 7.2 dB at 0.01 % probability on CCDF. Channel
bandwidth is 3.84 MHz.
001aan531
19
001aan532
50
ηD
(%)
Gp
(dB)
(1)
40
(1)
18
(2)
(2)
30
17
20
10
16
0
40
80
120
0
40
80
PL (W)
VDS = 28 V; IDq = 1300 mA.
VDS = 28 V; IDq = 1300 mA.
(1) f = 2300 MHz
(1) f = 2300 MHz
(2) f = 2400 MHz
Fig 9.
120
PL (W)
(2) f = 2400 MHz
Single carrier W-CDMA power gain as a
function of load power; typical values
001aan533
−20
APCR5M
(dBc)
Fig 10. Single carrier W-CDMA drain efficiency as a
function of load power; typical values
001aan534
−30
APCR10M
(dBc)
(2)
−30
−40
(1)
(2)
−40
−50
(1)
−50
−60
−60
0
40
80
120
−70
0
40
80
PL (W)
120
PL (W)
VDS = 28 V; IDq = 1300 mA.
VDS = 28 V; IDq = 1300 mA.
(1) f = 2300 MHz
(1) f = 2300 MHz
(2) f = 2400 MHz
(2) f = 2400 MHz
Fig 11. Single carrier W-CDMA ACPR at 5 MHz as a
function of load power; typical values
Fig 12. Single carrier W-CDMA ACPR at 10 MHz as a
function of load power; typical values
BLF7G24L-140_7G24LS-140#4
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
7 of 14
BLF7G24L-140; BLF7G24LS-140
Power LDMOS transistor
001aan535
8
001aan536
300
PL(M)
(W)
PAR
(dB)
250
6
200
(1)
(1)
(2)
(2)
150
4
100
2
50
0
40
80
120
0
40
80
PL (W)
120
PL (W)
VDS = 28 V; IDq = 1300 mA.
VDS = 28 V; IDq = 1300 mA.
(1) f = 2300 MHz
(1) f = 2300 MHz
(2) f = 2400 MHz
(2) f = 2400 MHz
Fig 13. Single carrier W-CDMA peak-to-average power
ratio as a function of load power;
typical values
Fig 14. Single carrier W-CDMA peak output power as a
function of load power; typical values
BLF7G24L-140_7G24LS-140#4
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
8 of 14
BLF7G24L-140; BLF7G24LS-140
Power LDMOS transistor
8. Package outline
Flanged ceramic package; 2 mounting holes; 2 leads
SOT502A
D
A
F
3
D1
U1
B
q
c
C
1
H
L
E1
p
U2
E
w1 M A M B M
A
2
w2 M C M
b
0
5
Q
10 mm
scale
DIMENSIONS (millimetre dimensions are derived from the original inch dimensions)
UNIT
A
b
c
mm
4.72
3.43
12.83
12.57
0.15
0.08
inches
0.186
0.135
0.505 0.006
0.495 0.003
OUTLINE
VERSION
D
E
E1
F
H
L
p
Q
q
U1
U2
w1
w2
20.02 19.96
19.61 19.66
9.50
9.30
9.53
9.25
1.14
0.89
19.94
18.92
5.33
4.32
3.38
3.12
1.70
1.45
27.94
34.16
33.91
9.91
9.65
0.25
0.51
0.788 0.786
0.772 0.774
0.374 0.375
0.366 0.364
0.067
1.100
0.057
1.345
1.335
0.390
0.380
0.01
0.02
D1
0.045 0.785
0.035 0.745
0.210 0.133
0.170 0.123
REFERENCES
IEC
JEDEC
JEITA
EUROPEAN
PROJECTION
ISSUE DATE
03-01-10
12-05-02
SOT502A
Fig 15. Package outline SOT502A
BLF7G24L-140_7G24LS-140#4
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
9 of 14
BLF7G24L-140; BLF7G24LS-140
Power LDMOS transistor
Earless flanged ceramic package; 2 leads
SOT502B
D
A
F
3
D
D1
c
U1
1
L
H
E1
U2
E
2
w2 M D M
b
0
5
Q
10 mm
scale
DIMENSIONS (millimetre dimensions are derived from the original inch dimensions)
UNIT
A
b
c
mm
4.72
3.43
12.83
12.57
0.15
0.08
inches
0.186
0.135
0.505 0.006
0.495 0.003
OUTLINE
VERSION
D
E
E1
F
H
L
Q
U1
U2
w2
20.02 19.96
19.61 19.66
9.50
9.30
9.53
9.25
1.14
0.89
19.94
18.92
5.33
4.32
1.70
1.45
20.70
20.45
9.91
9.65
0.25
0.788 0.786
0.772 0.774
0.374 0.375
0.366 0.364
0.045 0.785
0.035 0.745
0.210
0.170
0.067 0.815
0.057 0.805
D1
REFERENCES
IEC
JEDEC
JEITA
0.390
0.010
0.380
EUROPEAN
PROJECTION
ISSUE DATE
07-05-09
12-05-02
SOT502B
Fig 16. Package outline SOT502B
BLF7G24L-140_7G24LS-140#4
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
10 of 14
BLF7G24L-140; BLF7G24LS-140
Power LDMOS transistor
9. Abbreviations
Table 8.
Abbreviations
Acronym
Description
3GPP
Third Generation Partnership Project
CCDF
Complementary Cumulative Distribution Function
CW
Continuous Wave
DPCH
Dedicated Physical CHannel
IS-95
Interim Standard 95
ESD
ElectroStatic Discharge
LDMOS
Laterally Diffused Metal Oxide Semiconductor
LDMOST
Laterally Diffused Metal Oxide Semiconductor Transistor
N-CDMA
Narrowband Code Division Multiple Access
PAR
Peak-to-Average power Ratio
RF
Radio Frequency
VSWR
Voltage Standing Wave Ratio
W-CDMA
Wideband Code Division Multiple Access
10. Revision history
Table 9.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
BLF7G24L-140_7G24LS-140#4
20150901
Product data sheet
-
BLF7G24L-140_7G24LS140 v.3
Modifications:
•
The format of this document has been redesigned to comply with the new identity
guidelines of Ampleon.
•
Legal texts have been adapted to the new company name where appropriate.
BLF7G24L-140_7G24LS-140 v.3
20110801
Product data sheet
-
BLF7G24L-140_7G24LS140 v.2
BLF7G24L-140_7G24LS-140 v.2
20110405
Preliminary data sheet -
BLF7G24L-140_7G24LS140 v.1
BLF7G24L-140_7G24LS-140 v.1
20100805
Objective data sheet
-
-
BLF7G24L-140_7G24LS-140#4
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
11 of 14
BLF7G24L-140; BLF7G24LS-140
Power LDMOS transistor
11. Legal information
11.1
Data sheet status
Document status[1][2]
Product status[3]
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
Definition
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.ampleon.com.
11.2
Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Ampleon does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Ampleon sales office. In
case of any inconsistency or conflict with the short data sheet, the full data
sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Ampleon and its customer, unless Ampleon and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be valid
in which the Ampleon product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
11.3
Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, Ampleon does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. Ampleon takes no responsibility for
the content in this document if provided by an information source outside of
Ampleon.
In no event shall Ampleon be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost profits,
lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Ampleon’ aggregate and cumulative liability towards customer
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Ampleon.
Right to make changes — Ampleon reserves the right to make changes to
information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Suitability for use — Ampleon products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction of an
Ampleon product can reasonably be expected to result in personal injury,
death or severe property or environmental damage. Ampleon and its
suppliers accept no liability for inclusion and/or use of Ampleon products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Ampleon makes no representation
or warranty that such applications will be suitable for the specified use without
further testing or modification.
Customers are responsible for the design and operation of their applications
and products using Ampleon products, and Ampleon accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Ampleon product is suitable and
fit for the customer’s applications and products planned, as well as for the
planned application and use of customer’s third party customer(s). Customers
should provide appropriate design and operating safeguards to minimize the
risks associated with their applications and products.
Ampleon does not accept any liability related to any default, damage, costs or
problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Ampleon products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Ampleon does not accept any
liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — Ampleon products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.ampleon.com/terms, unless otherwise agreed in a valid written
individual agreement. In case an individual agreement is concluded only the
terms and conditions of the respective agreement shall apply. Ampleon
hereby expressly objects to applying the customer’s general terms and
conditions with regard to the purchase of Ampleon products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
BLF7G24L-140_7G24LS-140#4
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
12 of 14
BLF7G24L-140; BLF7G24LS-140
Power LDMOS transistor
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Ampleon product is automotive qualified, the product
is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Ampleon
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without Ampleon’ warranty of the product for such
automotive applications, use and specifications, and (b) whenever customer
uses the product for automotive applications beyond Ampleon’ specifications
such use shall be solely at customer’s own risk, and (c) customer fully
indemnifies Ampleon for any liability, damages or failed product claims
resulting from customer design and use of the product for automotive
applications beyond Ampleon’ standard warranty and Ampleon’ product
specifications.
11.4
Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
Any reference or use of any ‘NXP’ trademark in this document or in or on the
surface of Ampleon products does not result in any claim, liability or
entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of
the NXP group of companies and any reference to or use of the ‘NXP’
trademarks will be replaced by reference to or use of Ampleon’s own Any
reference or use of any ‘NXP’ trademark in this document or in or on the
surface of Ampleon products does not result in any claim, liability or
entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of
the NXP group of companies and any reference to or use of the ‘NXP’
trademarks will be replaced by reference to or use of Ampleon’s own
trademarks.
12. Contact information
For more information, please visit:
http://www.ampleon.com
For sales office addresses, please visit:
http://www.ampleon.com/sales
BLF7G24L-140_7G24LS-140#4
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 4 — 1 September 2015
© Ampleon The Netherlands B.V. 2015. All rights reserved.
13 of 14
BLF7G24L-140; BLF7G24LS-140
Power LDMOS transistor
13. Contents
1
1.1
1.2
1.3
2
3
4
5
6
7
7.1
7.2
7.3
7.4
8
9
10
11
11.1
11.2
11.3
11.4
12
13
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General description . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
Ordering information . . . . . . . . . . . . . . . . . . . . . 2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
Thermal characteristics . . . . . . . . . . . . . . . . . . 2
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Test information . . . . . . . . . . . . . . . . . . . . . . . . . 3
Ruggedness in class-AB operation . . . . . . . . . 3
Single carrier IS-95 . . . . . . . . . . . . . . . . . . . . . . 4
Pulsed CW . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Single carrier W-CDMA. . . . . . . . . . . . . . . . . . . 7
Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 9
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 11
Legal information. . . . . . . . . . . . . . . . . . . . . . . 12
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 12
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Contact information. . . . . . . . . . . . . . . . . . . . . 13
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© Ampleon The Netherlands B.V. 2015.
All rights reserved.
For more information, please visit: http://www.ampleon.com
For sales office addresses, please visit: http://www.ampleon.com/sales
Date of release: 1 September 2015
Document identifier: BLF7G24L-140_7G24LS-140#4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement