2015-2016-18 DataAcquisitionBoards
Data Acquisition Boards
18
Data Acquisition and Control Tutorial & Software
DAQNavi Introduction
DAQNavi Data Logger Configurable Data Logging Software
Analog I/O & Multifunction Card Selection Guide
Digital I/O & Counter Card Selection Guide
18-2
18-3
18-5
18-6
18-10
PCI Express DAQ Cards
PCIE-1730
PCIE-1751
PCIE-1753
PCIE-1752
PCIE-1754
PCIE-1756
PCIE-1760
PCIE-1810
PCIE-1816
PCIE-1816H
PCIE-1802
PCIE-1840
32-ch TTL and 32-ch Isolated Digital I/O PCI Express Card
48-ch Digital I/O and 3-ch Counter PCI Express Card
96-ch Digital I/O PCI Express Card
64-ch Isolated Digital Output PCI Express Card
64-ch Isolated Digital Input PCI Express Card
64-ch Isolated Digital I/O PCI Express Card
8-ch Relay and 8-ch Isolated Digital Input PCI Express Card
800 kS/s, 12-bit, 16-ch PCI Express Multifunction Card
1 MS/s, 16-bit, 16-ch PCI Express Multifunction Card
5 MS/s, 16-bit, 16-ch PCI Express Multifunction Card
8-ch, 24-Bit, 204.8 kS/s Dynamic Signal Acquisition PCI Express Card
4-ch 16Bit 125 MS/s High-Speed PCI Express Digitizer
18-17
18-18
18-19
18-20
18-21
18-22
18-23
18-24
PCI Multifunction DAQ Cards
PCI-1710U/UL
PCI-1710HGU
PCI-1711U/UL
PCI-1712/L
PCI-1716/L
100 kS/s, 12-bit, 16-ch Universal PCI Multifunction DAQ Card
100 kS/s, 12-bit, 16-ch Universal PCI Multifunction DAQ Card with High Gain
100 kS/s, 12-bit, 16-ch Universal PCI Multifunction DAQ Card
1 MS/s, 12-bit, 16-ch PCI Multifunction DAQ Card
250 kS/s, 16-bit, 16-ch PCI Multifunction DAQ Card
18-25
18-26
18-27
18-28
PCI Analog I/O Cards
PCI-1741U
PCI-1742U
PCI-1714U
PCI-1714UL
PCI-1713U
PCI-1715U
PCI-1747U
PCI-1720U
PCI-1724U
PCI-1721
PCI-1723
PCI-1727U
200 kS/s, 16-bit, 16-ch Universal PCI Multifunction Card
1 MS/s, 16-bit, 16-ch Universal PCI Multifunction Card
30 MS/s, 12-bit, Simultaneous 4-ch Analog Input Universal PCI Card
10 MS/s, 12-bit, Simultaneous 4-ch Analog Input Universal PCI Card
100 kS/s, 12-bit, 32-ch Isolated Analog Input Universal PCI Card
500 kS/s, 12-bit, 32-ch Isolated Analog Input Universal PCI Card
250 kS/s, 16-bit, 64-ch Analog Input Universal PCI Card
12-bit, 4-ch Isolated Analog Output Universal PCI Card
14-bit, 32-ch Isolated Analog Output Universal PCI Card
12-bit, 4-ch Analog Output PCI Card with 16-ch Digital I/O
16-bit, 8-ch Analog Output PCI Card with 16-ch Digital I/O
14-bit, 12-ch Analog Output Universal PCI Card with 32-ch Digital I/O
18-29
18-30
18-31
18-32
18-33
18-34
18-35
PCI Digital I/O & Counter Cards
PCI-1735U
PCI-1737U
PCI-1739U
PCI-1751
PCI-1753
PCI-1753E
PCI-1755
PCI-1730U
PCI-1733
PCI-1734
PCI-1750
PCI-1752U
PCI-1754
PCI-1756
PCI-1758UDI
PCI-1758UDO
PCI-1758UDIO
PCI-1760U
PCI-1761
PCI-1762
PCI-1780U
PCI-1784U
64-ch Digital I/O and Counter Universal PCI Card
24-ch Digital I/O Universal PCI Card
48-ch Digital I/O Universal PCI Card
48-ch Digital I/O and 3-ch Counter PCI Card
96-ch Digital I/O PCI Card
96-ch Digital I/O Extension Card for PCI-1753
80 MB/s, 32-ch Digital I/O PCI Card
32-ch Isolated Digital I/O Universal PCI Card
32-ch Isolated Digital Input PCI Card
32-ch Isolated Digital Output PCI Card
32-ch Isolated Digital I/O and 1-ch Counter PCI Card
64-ch Isolated Digital Output Universal PCI Card
64-ch Isolated Digital Input PCI Card
64-ch Isolated Digital I/O PCI Card
128-ch Isolated Digital Input Universal PCI Card
128-ch Isolated Digital Output Universal PCI Card
128-ch Isolated Digital I/O Universal PCI Card
8-ch Relay and 8-ch Isolated Digital Input Universal PCI Card with 8-ch Counter/
Timer
8-ch Relay and 8-ch Isolated Digital Input PCI Card
16-ch Relay and 16-ch Isolated Digital Input PCI Card
8-ch, 16-bit Counter/Timer Universal PCI Card
4-ch, 32-bit Encoder Counter Universal PCI Card with 8-ch Isolated Digital I/O
To view all of Advantech’s Data Acquisition Boards, please visit www.advantech.com/products.
18-36
18-37
18-38
18-39
18-40
18-41
18-42
18-43
18-44
18-45
18-46
18-47
18-48
Data Acquisition and Control
Tutorial & Software
PC-based Data Acquisition (DAQ)
System Overview
Because industrial PC I/O interface products have become increasingly reliable, accurate,
and affordable in the last few years, PC-based data acquisition and control systems are
nowadays widely used in industrial and laboratory applications such as monitoring,
control, data acquisition and automated testing.
Analog Outputs (D/A)
The opposite of analog to digital conversion is digital to analog (D/A) conversion. This
operation converts digital information into analog voltage or current. D/A devices allow
a computer to control real-world events.
It requires know-how of electrical and computer engineering to select and build a data
acquisition (DAQ) and control system that actually does what you want. This tutorial
gives a brief introduction to what data acquisition and control systems do and how to
configure them. Here, we cover:
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Transducers and Actuators
Signal Conditioning
Data Acquisition and Control Hardware
Getting Started
Transducers and Actuators
A transducer converts temperature, pressure, level, length, position, etc. into voltage,
current, frequency, pulses or other signals.
Thermocouples, thermistors and resistance temperature detectors (RTDs) are common
transducers for temperature measurements. Other types of transducers include flow
sensors, pressure sensors, strain gauges, load cells and LVDTs, which measure flow
rate, pressure variances, force or displacement.
An actuator is a device that activates process control equipment by using pneumatic,
hydraulic or electrical power. For example, a valve actuator can open and close a valve
to control fluid rates.
Signal Conditioning
Signal conditioning circuits improve the quality of signals generated by transducers before
they are converted into digital signals by the PC's data-acquisition hardware. Examples
of signal conditioning are signal scaling, amplification, linearization, cold-junction
compensation, filtering, attenuation, excitation, common-mode rejection, and so on.
Analog output signals may directly control process equipment. The process can give
feedback in the form of analog input signals. This is referred to as a closed loop control
system with PID control. Analog outputs can also be used to generate waveforms. In this
case, the device behaves as a function generator.
Digital Inputs and Outputs
Digital input/output functions are useful in applications such as contact closure and switch
status monitoring, industrial On/Off control and digital communications.
Counter/Timer
A counter/timer can be used for event counting, flowmeter monitoring, frequency counting,
pulse width measurement, time period measurement, and so on.
Getting Started
Advantech: The Source For What You Need
Advantech manufactures data acquisition hardware and software for measurement,
monitoring and applications control. The following guide is provided to help you choose
components for your data acquisition system.
Step 1: Know Your Fundamental Goal
One of the most common signal conditioning functions is amplification. For maximum
resolution, the voltage range of the input signals should be approximately equal to the
maximum input range of the A/D converter. Amplification expands the range of the
transducer signals so that they match the input range of the A/D converter. For example,
a x10 amplifier maps transducer signals that range from 0 to 1 V into the range 0 to 10
V before they go into the A/D converter.
Decide whether your DAQ system will be used primarily for measurement, monitoring,
control, or analysis. Know the data requirements of your process, and know the number
of data collection points in your system. Know the required data collection speed, the
sampling rate, the type of measurement, the voltage or current being produced, the desired
accuracy and the output resolution at each data collection point. Finally, know the timing
of events in your system, and any special environmental conditions that exist.
Data Acquisition & Control Hardware
Step 2: Hardware Selection
Data acquisition and control hardware generally performs one or more of the following
functions: analog input, analog output, digital input, digital output and counter/timer
functions. This section will discuss each function and list some considerations that are
important when you select a data acquisition and control system.
Analog Inputs (A/D)
Analog to digital (A/D) conversion changes analog voltage or current levels into digital
information. The conversion is necessary to enable a computer to process or store the
signals.
Select the hardware required to achieve your fundamental goal. Advantech provides plug-in
boards for Analog-to-Digital, Digital-to-Analog, Digital I/O needs. Both ISA and PCI bus
products are available. Your hardware selection should be based on five major criteria:
1. Number and types of channels
2. Differential or single-ended inputs
3. Resolution
4. Speed
5. Software compatibility with hardware
Step 3: Accessory Selection
Most applications require additional accessories which are available as separate items.
These include:
1. Expansion peripherals to add channels to your system
2. Cables, signal conditioners and external boxes such as screw terminals or BNC
accessories
Step 4: Software Selection
The most significant criteria when selecting A/D hardware are:
1. Number of input channels
2. Single-ended or differential input signals
3. Sampling rate (in samples per second)
4. Resolution (usually measured in bits of resolution)
5. Input range (specified in full-scale volts)
6. Noise and nonlinearity
18-2
Data Acquisition Boards
More than any other single factor, software will determine your system start-up time, as
well as its effectiveness, suitability for your application, and ease of modification.
Three major criteria should determine the choice of software:
1. Operating system used
2. User programming expertise
3. Software compatibility with hardware
DAQNavi Introduction
What is DAQNavi?
DAQNavi is a Advantech next-generation driver package, for programmers to develop their application programs using Advantech DAQ boards or devices. This integrated driver
package includes device drivers, SDK, tutorial and utility. With the user-friendly design, even the beginner can quickly get familiar with how to utilize DAQ hardware and write programs
through the intuitive "Advantech Navigator" utility environment. Many example codes for different development environment dramatically decrease users’ programming time and effort.
You can go to www.advantech.com/DAQNavi for more information about Advantech DAQNavi.
Multiple Operating System Support
.NET Support
DAQNavi supports many popular operating systems (OS) used in automation applications.
For different OSs, API functions will be the same, so users can simply install the driver
without modifying their program again when migrating between two different OSs.
DAQNavi offers a series of .NET Component object, that you can benefit from
platform-unified feature by latest .NET technology. User can simply drag and drop the
.NET Components within .NET programming environment, such as Microsoft Visual C#
and VB .NET. An intuitive window (called "DAQNavi Wizard") will pop-up, and user can
perform all configurations by sequence. It is so-called "Configure & Run" programming.
Programmers also can choose writing code manually with the .NET Component, to have
a more flexible object calling. With Advantech CSCL technology, engineers can do the
similar programming in an native environment such as Visual C++.
DAQNavi supports latest Windows 8/7/Vista/XP and Windows CE (both 32-bit and 64-bit).
Besides Windows operating system, Linux is famous for its openness and flexibility.
DAQNavi software package also support Linux OS including Ubuntu, Fedora, Debian,
Susi distributions. For other distributions, please contact the local Advantech branch
or dealer in your area.
Note: DAQNavi only supports Windows 8 desktop version. Windows RT version is not
supported.
LabVIEW and Matlab Support
LabVIEW is popular graphical development environment used for measurement and
automation. For LabVIEW user, DAQNavi offers two options for programming: Express
VI and Polymorphic VIs. Express VI helps user quickly complete his programming
without extra wiring. When user drags the Express VI on LabVIEW Block Diagram, a
pop-up intuitive wizard window will appear and user can perform configurations. After
that, the programming is done. So it is similar to the .NET Component DAQ Wizard used
in Microsoft Visual Studio environment, making programming more easily. As for the
Polymorphic VI, user can use several VIs and wiring to build more complex program.
Except LabVIEW, DAQNavi also support Matlab programming.
C++, Delphi, VB, BCB, Java and Qt Support
DAQNavi offers C++ Class Library (for VC++ and Borland C++ Builder) and ActiveX (for
Visual Basic, Delphi, and BCB) for Native programming environment with the same calling
interface as .NET Class Library. With DAQNavi Java class library and Qt class library,
users can develop Java and Qt programs to migrate between different operating systems
(including Windows and Linux).
Support Modules
DAQNavi supports all PCI Express, PCI, PC/104, and PCI-104 cards, as well as all USB
DAQ devices.
DAQNavi Driver Package Architecture
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
WebAccess+ Solutions
Motion Control
Power & Energy
Automation
Automation Software
Intelligent Operator
Panel
Automation Panels
Panel PCs
Industrial Wireless
Solutions
Industrial Ethernet
Solutions
Industrial Gateway
Solutions
Serial communication
cards
Embedded Automation
PCs
DIN-Rail IPCs
CompactPCI Systems
IoT Wireless I/O
Modules
IoT Ethernet I/O
Modules
RS-485 I/O Modules
Note: When you visit Advantech DAQNavi download website, you can find two software: (1) DAQNavi SDK (2) individual DAQNavi driver for specific hardware. You need to install
these two software on your computer to utilize the hardware.
Online Download www.advantech.com/products
Data Acquisition
Boards
18-3
DAQNavi Introduction
Powerful Intuitive Utility: Advantech Navigator
SDKs
1. DAQ User Interface Manual
To shorten the development time, Advantech offer a lot of tutorial and reference
documentation.There are two programming ways you can refer: (1) Class Library
(2) Device Control. You can find instructions for programming. It not only teaches
you how to create one application project, but also how to write the program with a
programming chart and example code.
Devices
You can see all your installed Advantech DAQ devices here, including the simulated
DAQ device called “DemoDevice”. In other words, you don’t need any hardware
installed on your computer to test all operations within DAQNavi. For each device,
there are four items you can select.
1. Device Setting
You can perform all hardware configurations for the selected device.
2. Device Test
You can test all hardware functionality here, without any programming.
2.Tutorial Video
If you don't know how to start creating a project, Advantech offers a tutorial video for
your programming reference.
Scenarios: Commonly-used for Measurement and Automation Applications
Category
DI Pattern Match
Interrupt
DI Status Change
Interrupt
Description
Read single AI value once
Read a buffer of AI values once
(Don't need to wait the acquisition is done to run other program)
Read a buffer of AI values once
(Need to wait the acquisition is done to run other program)
Continuously read a buffer of AI values
Change AO values once
Change AO value based on a pre-defined waveform once
(Don't need to wait the generation is done to run other program)
Change AO value based on a pre-defined waveform once
(Need to wait the generation is done to run other program)
Continuously change AO value based on a pre-defined waveform
Read the selected DI port value once
When DI bit meets a pre-defined edge change (rising or falling), an
interupt is generated
When selected DI port meets pre-defined pattern, an interupt is
generated
When the status of certain selected channel of DI port changes, an
interupt is generated
Digital
Output
Static DO
Change DO values once
Timer/
Counter
Delayed Pulse
Generation
Pulse Output with
Timer Interrupt
Event Counter
Frequency
Measurement
Pulse Width
Measurement
PWM Output
When a trigger from coutner gate is met, a pulse is generated after a
specific period
Continuously generate a periodic pulse train (using counter internal
clock), and an event will be sent out at the same time.
Continously count the pulse number of signal from counter input
Analog
Input
3. Scenarios
Advantech defines commonly-used measurement and automation applications, named
"scenarios" for users to refer. For each scenario, one example program is embedded
within Advantech Navigator that you can execute it directly. Corresponding source
code for each scenario is provided, written by different language (C#, VB .NET, C++,
Delphi , Qt, VB6, and Java). Besides, wiring diagram for each scenario is available here.
Analog
Output
Digital
Input
4. Reference
You can find the detailed user manual for the selected device.
18-4
Data Acquisition Boards
Scenario
Instant AI
Asynchronous
One Buffered AI
Synchronous One
Buffered AI
Streaming AI
Static AO
Asynchronous
One Waveform AO
Synchronous One
Waveform AO
Streaming AO
Static DI
DI Interrupt
Meaure frequency of singal from counter input
Meaure pulse width of signal from counter input
Generate PWM (Pulse Width Modulation) signal
DAQNavi Data
Logger
Configurable Data Logging Software
Features
ƒƒ Data logging, display and recording without programming
ƒƒ Instant AI, buffered AI and static DI data logging
ƒƒ Intuitive hardware channel parameters configuration wizard
ƒƒ Supports simulated device operation
ƒƒ Save configurations into a project file for future re-use
ƒƒ Real-time display with zoom and pan operation
ƒƒ Supports data recording to store as file to local disk
ƒƒ Recorded data playback to view historical data
ƒƒ Supports both analog graph and digital graph display
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
WebAccess+ Solutions
Motion Control
Power & Energy
Automation
Automation Software
Intelligent Operator
Panel
Automation Panels
Introduction
Advantech DAQNavi Data Logger is ready-to-use application software that engineers can leverage its easy-to-use interface to perform data logging, display and recording. Without
spending any time on programming, engineers can benefit from flexibility to acquire and store data from various Advantech data acquisition devices for their data logging tasks.
Panel PCs
Features Details
Industrial Wireless
Solutions
Data Acquisition Devices Configuration
Configuration Management by Project Files
Before data logging measurement, engineers can do all necessary analog and digital
input channels configuration using built-in DAQNavi wizard. Step-by-step instructions
by intuitive window can help engineer easily complete related settings. Except real data
acquisition devices, DAQNavi Data Logger also offer simulated device that engineers can
do all operation without any hardware installed on computer.
Engineer can create and edit a project to include one or several data logging tasks.
Within one project, data can be acquired and displayed from one or multiple data
acquisition devices. Current input channels configurations and logging settings can be
saved as a specific project file. Afterwards, engineer can open previous project file to load
all configurations and start data logging tasks immediately.
Real-time Data Logging, Display and Recording
After data acquisition configuration is done, engineers can immediately start data
acquisition and display the logging data on a real-time graph. The graph can be zoom
in, zoom out or pan dynamically during data logging. Engineers can decide if they want
to record the data (save data into a pre-defined file) during data logging.
Historical Data Playback
Previous recorded data can be loaded back to DANNavi Data Logger software and viewed
by Playback function. Related zoom in, zoom out and pan operation is also available for
historical data display.
Industrial Ethernet
Solutions
Industrial Gateway
Solutions
Serial communication
cards
Embedded Automation
PCs
DIN-Rail IPCs
CompactPCI Systems
Specifications
Supported Hardware
ƒƒ PCI Express multifunction, analog input and digital input cards
ƒƒ PCI multifunction, analog input and digital input cards
ƒƒ USB multifunction, analog input and digital input modules
ƒƒ PC/104 and PCI-104 multifunction, analog input and digital input cards
IoT Wireless I/O
Modules
IoT Ethernet I/O
Modules
RS-485 I/O Modules
Data Acquisition
Boards
Online Download www.advantech.com/products
18-5
Analog I/O & Multifunction
Card Selection Guide
Multifunction
Category
PCI
Bus
Model
Analog Input
General
Spec.
Input
Ranges
Trigger
Modes
Analog Output
PCI-1711U/UL
PCI-1712/L
PCI-1716/L
PCI-1706U/UL
Resolution
12 bits
12 bits
12 bits
12 bits
16 bits
16 bits
12 bits
Channels
16 SE/8 Diff.
16 SE/8 Diff.
16 SE
16 SE/8 Diff.
16 SE/8 Diff.
8 Diff.
16 SE/8 Diff.
1,024 samples
Onboard FIFO
4,096 samples
4,096 samples
1,024 samples
1,024 samples
1,024 samples
8,192 samples
100 kS/s
100 kS/s
100 kS/s
1 MS/s
250 kS/s
250 kS/s
100 kS/s
Unipolar Inputs
(V)
0 ~ 10, 0 ~ 5,
0 ~ 2.5,
0 ~ 1.25
0 ~ 10, 0 ~ 1,
0 ~ 0.1,
0 ~ 0.01
-
0 ~ 10, 0 ~ 5,
0 ~ 2.5,
0 ~ 1.25
0 ~ 10, 0 ~ 5,
0 ~ 2.5,
0 ~ 1.25
-
0 ~ 10, 0 ~ 5,
0 ~ 2.5,
0 ~ 1.25
Bipolar Inputs (V)
±10, 5, 2.5,
1.25,
0.625
±10, 5, 1, 0.5,
0.1,
0.05, 0.01,
0.005
±10, 5, 2.5,
1.25,
0.625
±10, 5, 2.5,
1.25,
0.625
±10, 5, 2.5,
1.25,
0.625
±10, 5, 2.5,
1.25
±10, 5, 2.5,
1.25,
0.625
Configurable
Per-Channel







Pacer/Software/
External Pulse







-
Analog Slope
-
-
-

-

Advanced Trigger
-
-
-

-

-
Software







DMA
-
-
-
Bus-mastering
Bus-mastering

-
Resolution
12 bits
12 bits
12 bits
12 bits
16 bits
12 bits
12 bits
Channels
2 (PCI-1710U
only)
2
2 (PCI-1711U
only)
2 (PCI-1712
only)
2 (PCI-1716
only)
2 (PCI-1706U
only)
1
Onboard FIFO
-
-
-
32,768 samples
-
-
0 ~ 5, 0 ~ 10
Static update
Output Range (V)
0 ~ 5, 0 ~ 10
0 ~ 5, 0 ~ 10
0 ~ 5, 0 ~ 10
0 ~ 5, 0 ~ 10,
±5, ±10
0 ~ 5, 0 ~ 10,
±5, ±10
0 ~ 5, 0 ~ 10,
±5, ±10, 0 ~ 20
mA, 0 ~ 24 mA,
4 ~ 20 mA
Output Rate
Static update
Static update
Static update
1 MS/s
Static update
Static update
-
-
-

-
-
Input Channels
16
16
16
Output Channels
16
16
16
Channels
1
1
1
3
1
2
1
Resolution
16 bits
16 bits
16 bits
16 bits
16 bits
32 bits
16 bits
Max. Input Frequency
10 MHz
16
(shared)
16
16
16 (shared)
16
16
10 MHz
10 MHz
10 MHz
10 MHz
10 MHz
10 MHz
Isolation Voltage
-
-
-
-
-
-
-
Auto Calibration
-
-
-



-
BoardID Switch



-



Dimensions (mm)
175 x 100
175 x 100
175 x 100
175 x 100
175 x 100
175 x 100
175 x 100
Connector
68-pin SCSI
68-pin SCSI
68-pin SCSI
68-pin SCSI
68-pin SCSI
68-pin SCSI
DB37
Windows XP/2000







WinCE

-
-
-
-
-
-
Linux








Windows 8/7/Vista/XP/2000






WinCE

-
-
-
-
-
-
Linux
-
-

-
-
-
-
LabVIEW Driver







Page
19-23
19-23
19-24
19-25
19-26
online
online
* All channels should be set to the same range.
** SS: Single DMA channel, Single A/D channel scan; SM: Single DMA channel, Multiple A/D channel scan
18-6
PCI-1718HDU
DMA Transfer
Digital
I/O
Timer/
Counter
Legacy
Driver
PCI-1710HGU
Sampling Rate
Data
Transfer
Modes
DAQNavi
Driver
PCI-1710U/UL
Data Acquisition Boards
Selection Guide
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
WebAccess+ Solutions
Motion Control
Multifunction
Category
PCI
Bus
Model
Analog Input
General
Spec.
Analog Output
PCL-711B
PCL-812PG
PCL-818L
PCL-818HD
16 bits
12 bits
12 bits
12 bits
12 bits
12 bits
Channels
16 SE/8 Diff.
16 SE/8 Diff.
8 SE
16 SE
16 SE/8 Diff
16 SE/8 Diff
16 SE/8 Diff
1,024 samples
1,024 samples
-
-
-
1,024 samples
200 kS/s
1 MS/s
40 kS/s
30 kS/s
40 kS/s
100 kS/s
100 kS/s
Unipolar Inputs
(V)
0 ~ 10, 0 ~ 5,
0 ~ 2.5,
0 ~ 1.25*
0 ~ 10, 0 ~ 5
0 ~ 2.5,
0 ~ 1.25
-
-
-
0 ~ 10, 0 ~ 5,
0 ~ 2.5,
0 ~ 1.25
0 ~ 10, 0 ~ 1,
0 ~ 0.1,
0 ~ 0.01
Bipolar Inputs (V)
±10, 5, 2.5,
1.25, 0.625*
±10, 5, 2.5,
1.25,0.625
±5, 2.5, 1.25,
0.625, 0.3125
±10, 5, 2.5,
1.25, 0.625,
0.3125
±10, 5, 2.5,
1.25, 0.625
±10, 5, 2.5,
1.25, 0.625
±10, 5, 1, 0.5,
0.1, 0.05, 0.01,
0.005
Configurable
Per-Channel
-






Pacer/Software/
External Pulse







Analog Slope
-
-
-
-
-
-
-
Advanced Trigger
-
-
-
-
-
-
-
Software







DMA
-
Bus-mastering
-
SS**
SM**
SM**
SM**
Resolution
16 bits
16 bits
12 bits
12 bits
12 bits
12 bits
12 bits
Channels
1
2
1
2
1
1
1
Onboard FIFO
-
-
-
-
-
-
-
Output Range (V)
±5, ±10
0 ~ 5, 0 ~ 10,
±5, ±10
0 ~ 5, 0 ~ 10
0 ~ 5, 0 ~ 10
0 ~ 5, 0 ~ 10
0 ~ 5, 0 ~ 10,
±10
0 ~ 5, 0 ~ 10,
±10
Output Rate
Static update
Static update
Static update
Static update
Static update
Static update
Static update
DMA Transfer
-
-
-
-
-
-
-
Input Channels
16
16
16
16
16
16
16
Output Channels
16
16
16
16
16
16
16
Channels
1
1
-
1
1
1
1
Resolution
16 bits
16 bits
-
16 bits
16 bits
16 bits
16 bits
Max. Input Frequency
10 MHz
10 MHz
-
2 MHz
10 MHz
10 MHz
10 MHz
-
-
-
-
-
-
-
Isolation Voltage
Legacy
Driver
PCL-818HG
1,024 samples
Input
Ranges
Digital
I/O
PCI-1742U
16 bits
Onboard FIFO
Data
Transfer
Modes
Timer/
Counter
PCI-1741U
Resolution
Sampling Rate
Trigger
Modes
DAQNavi
Driver
Power & Energy
Automation
ISA
Auto Calibration


-
-
-
-
-
BoardID Switch


-
-
-
-
-
Dimensions (mm)
175 x 100
175 x 100
175 x 100
185 x 100
155 x 100
185 x 100
185 x 100
Connector
68-pin SCSI
68-pin SCSI
3 x 20-pin
5 x 20-pin
DB37
DB37
DB37







Windows XP/2000
WinCE
-
-
-
-
-
-
-
Linux


-
-
-
-
-
Windows 8/7/Vista/XP/2000


-
-



WinCE
-
-
-
-
-
-
-
Linux

-
-
-
-
-
-
LabVIEW Driver







Page
19-27
19-27
online
online
online
online
online
* All channels should be set to the same range.
** SS: Single DMA channel, Single A/D channel scan; SM: Single DMA channel, Multiple A/D channel scan
Online Download www.advantech.com/products
Automation Software
Intelligent Operator
Panel
Automation Panels
Panel PCs
Industrial Wireless
Solutions
Industrial Ethernet
Solutions
Industrial Gateway
Solutions
Serial communication
cards
Embedded Automation
PCs
DIN-Rail IPCs
CompactPCI Systems
IoT Wireless I/O
Modules
IoT Ethernet I/O
Modules
RS-485 I/O Modules
Data Acquisition
Boards
18-7
Analog I/O & Multifunction
Card Selection Guide
Multifunction
Category
PC/104
Bus
Model
Analog Input
General
Spec.
Input
Ranges
Trigger
Modes
PCM-3718HO
PCM-3810I
PCIE-1810
PCIE-1816
Resolution
12 bits
12 bits
12 bits
12 bits
12 bits
16 bits
16 bits
Channels
16 SE/8 Diff.
16 SE/8 Diff.
16 SE/8 Diff.
16 SE/8 Diff.
16 SE/8 Duff.
16 SE/8 Duff.
16 SE/8 Duff.
Onboard FIFO
-
-
1,024 samples
4,096 samples
4,096 samples
4,096 samples
4,096 samples
Sampling
Rate
100 kS/s
100 kS/s
100 kS/s*
250 kS/s
800 kS/s
1 MS/s
5 MS/s
Unipolar
Inputs (V)
0 ~ 10, 0 ~ 5
0 ~ 2.5,
0 ~ 1.25
0 ~ 10, 0 ~ 1
0 ~ 0.1,
0 ~ 0.01
0 ~ 10, 0 ~ 5
0 ~ 2.5,
0 ~ 1.25
0 ~ 10, 0 ~ 5,
0 ~ 2.5,
0 ~ 1.25
0 ~ 10, 0 ~ 5,
0 ~ 2.5,
0 ~ 1.25
0 ~ 10, 0 ~ 5,
0 ~ 2.5,
0 ~ 1.25
0 ~ 10, 0 ~ 5,
0 ~ 2.5,
0 ~ 1.25
Bipolar Inputs
(V)
±10, 5, 2.5,
1.25, 0.625
±10, 5, 1, 0.5,
0.1, 0.05, 0.01,
0.005
±10, 5, 2.5,
1.25, 0.625
±10, 5, 2.5,
1.25, 0.625
±10, ±5, 2.5, 1.25,
0.625
±10, ±5, 2.5, 1.25,
0.625
±10, ±5, 2.5, 1.25,
0.625
Configurable
Per-Channel







Pacer/
Software/
External Pulse







Analog Slope
-
-
-
-



-

Start/ Stop/ Delay
to Start/ Delay to
Stop
Start/ Stop/ Delay
to Start/ Delay to
Stop
Start/ Stop/ Delay
to Start/ Delay to
Stop
Data
Transfer
Modes
Analog Output
Digital
I/O
Timer/
Counter
Legacy
Driver
-
-
PCIE-1816H
Software







DMA
SS**
SS**
SS**
-
Bus-mastering
Bus-mastering
Bus-mastering
-
-
12 bits
12 bits
12 bits
16 bits
16 bits
2 (Waveform
Output)
2 (Waveform
Output)
Resolution
DAQNavi
Driver
PCIE
PCM-3718HG
Advanced
Trigger
Channels
-
-
1
2
2 (Waveform
Output)
Onboard FIFO
-
-
-
-
4,096 samples
4,096 samples
4,096 samples
-
0 ~ 5, 0 ~ 10
0 ~ 5, 0 ~ 10,
±5, ±10
0 ~ 5, 0 ~ 10,
±5, ±10
0 ~ 5, 0 ~ 10,
±5, ±10
0 ~ 5, 0 ~ 10,
±5, ±10
Output Range (V)
-
Output Rate
-
-
Static update
250 kS/s
500 kS/s/s
3 MS/s
3 MS/s
DMA Transfer
-
-
-
-
Bus-mastering
Bus-mastering
Bus-mastering
Input Channels
16
(shared)
16
(shared)
16
(shared)
16
(shared)
24
(shared)
24
(shared)
24
(shared)
Output Channels
Channels
1
1
1
3
2
2
2
Resolution
16 bits
16 bits
16 bits
16 bits
32-bit
32-bit
32-bit
Max. Input Frequency
10 MHz
10 MHz
10 MHz
10 MHz
10 MHz
10 MHz
10 MHz
Isolation Voltage
-
-
-
-
-
-
-
Auto Calibration
-
-
-




BoardID Switch
-
-
-
-



Dimensions (mm)
96 x 90
96 x 90
96 x 90
96 x 90
168 x 100
168 x 100
168 x 100
Connector
2 x 20-pin
2 x 20-pin
2 x 20-pin
50-pin/26-pin
box header
68-pin SCSI
68-pin SCSI
68-pin SCSI
Windows XP/2000




-
-
-
WinCE



-
-
-
-
Linux



-
-
-
-
Windows 8/7/Vista/
XP/2000







WinCE
-
-
-
-
-
-
-
Linux
-
-
-

-
-
-
LabVIEW Driver







Page
19-49
19-49
19-49
19-47
19-21
19-22
19-22
* 80 kHz on Pentium 4-based (or upper) system
** SS: Single DMA channel, Single A/D channel scan
18-8
PCI-104
PCM-3718H
Data Acquisition Boards
Selection Guide
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
WebAccess+ Solutions
Motion Control
Analog Input
Category
Analog Input
Input
Ranges
Trigger
Modes
Analog Output
Digital
I/O
Timer/
Counter
Legacy
Driver
PCI-104
Power & Energy
Automation
PCI
PCI-1713U
PCI-1714U
PCI-1714UL
PCI-1715U
PCI-1747U
PCL-813B
PCM-3813I
PCI-1720U
PCI-1721
12 bits
12 bits
12 bits
12 bits
16 bits
12 bits
12 bits
-
-
Channels
32 SE/16
Diff.
4 SE
4 SE
32 SE/16 Diff.
64 SE/32 Diff.
32 SE
32 SE/16 Diff.
-
-
Onboard FIFO
4,096
samples
32,768
samples
8,192
samples
1,024 samples
1,024 samples
-
1,024 samples
-
-
Sampling Rate
100 kS/s
30 MS/s
10 MS/s
500 kS/s
250 kS/s
25 kS/s
100 kS/s
-
-
Unipolar Inputs
(V)
0 ~ 10, 0
~ 5,
0 ~ 2.5,
0 ~ 1.25
-
-
0 ~10, 0 ~ 5
0 ~ 2.5,
0 ~1.25
0 ~ 10, 0 ~ 5,
0 ~ 2.5,
0 ~ 1.25
0 ~ 10, 0 ~ 5,
0 ~ 2.5,
0 ~ 1.25
0 ~ 10, 0 ~ 5,
0 ~ 2.5,
0 ~ 1.25
-
-
Bipolar Inputs
(V)
±10, 5, 2.5,
1.25, 0.625
±5, 2.5, 1,
0.5
±5, 2.5, 1,
0.5
±10, 5, 2.5,
1.25, 0.625
±10, 5, 2.5,
1.25, 0.625
±5, 2.5, 1.25,
0.625
±5, 2.5, 1.25,
0.625
-
-
Configurable
Per-Channel







-
-
Pacer/
Software/
External Pulse




Pacer/
Software
Software

-
-
Analog Slope
-


-
-
-
-
-
-
Advanced
Trigger
-


-
-
-
-
-
-
Software







-
-
Busmastering
Data
Transfer
Modes
DAQNavi
Driver
ISA
Resolution
Model
General
Spec.
Analog Output
PCI
Bus
-
Busmastering
Bus-mastering
Bus-mastering
-
-
-
-
Resolution
-
-
-
-
-
-
-
12 bits
12 bits
Channels
-
-
-
-
-
-
-
4
4
(Waveform
Output)
Onboard FIFO
-
-
-
-
-
-
-
-
1,024 samples
0 ~ 5, 0 ~ 10,
±5, ±10,
0 ~ 20 mA,
4 ~ 20 mA
DMA
Output Range (V)
-
-
-
-
-
-
-
0 ~ 5, 0 ~ 10,
±5, ±10,
0 ~ 20 mA,
4 ~ 20 mA
Output Rate
-
-
-
-
-
-
-
Static update
10 MS/s
Bus-mastering
DMA Transfer
-
-
-
-
-
-
-
-
Input Channels
-
-
-
-
-
-
-
-
Output Channels
-
-
-
-
-
-
-
-
16
(shared)
Channels
-
-
-
-
-
-
-
-
1
Resolution
-
-
-
-
-
-
-
-
16 bits
Max. Input Frequency
-
-
-
-
-
-
-
-
10 MHz
Isolation Voltage
2,500 VDC
-
-
2,500 VDC
-
500 VDC
2,500 VDC
2,500 VDC
-
Auto Calibration
-


-

-
-
-

BoardID Switch
-




-
-


Dimensions (mm)
175 x 100
175 x 100
175 x 100
175 x 100
175 x 100
219 x 100
96 x 90
175 x 100
175 x 100
Connector
DB37
4 x BNC
4 x BNC
DB37
68-pin SCSI
DB37
40-pin
DB37
68-pin SCSI
Windows XP/2000









WinCE

-
-
-

-
-

-
Linux

v

-

-
-


Windows 8/7/Vista/
XP/2000









WinCE
-
-
-
-
-
-
-

-
Linux
-




-
-
-

LabVIEW Driver









Page
19-29
19-28
19-28
19-29
19-30
online
19-47
19-31
19-32
Automation Software
Intelligent Operator
Panel
Automation Panels
Panel PCs
Industrial Wireless
Solutions
Industrial Ethernet
Solutions
Industrial Gateway
Solutions
Serial communication
cards
Embedded Automation
PCs
DIN-Rail IPCs
CompactPCI Systems
IoT Wireless I/O
Modules
IoT Ethernet I/O
Modules
RS-485 I/O Modules
Data Acquisition
Boards
* 80 kHz on Pentium 4-based (or upper) system
** SS: Single DMA channel, Single A/D channel scan
Online Download www.advantech.com/products
18-9
Digital I/O & Counter Card
Selection Guide
Analog Output
Category
PCI
Bus
Model
General
Spec.
Analog
Input
Legacy
Driver
PCL-727
Resolution
-
-
-
-
-
-
Channels
-
-
-
-
-
-
PCL-728
-
-
-
-
-
-
-
-
-
-
-
Unipolar Inputs (V)
-
-
-
-
-
-
Bipolar Inputs (V)
-
-
-
-
-
-
Configurable
Per-Channel
-
-
-
-
-
-
Pacer/Software/
External Pulse
-
-
-
-
-
-
Analog Slope
-
-
-
-
-
-
Advanced Trigger
-
-
-
-
-
-
Software
-
-
-
-
-
DMA
-
-
-
-
-
-
Resolution
16 bits
14 bits
14 bits
12 bits
12 bits
12 bits
Channels
8
32
12
6
12
2
Onboard FIFO
-
-
-
-
-
-
Output Range (V)
±10, 0 ~ 20 mA,
4 ~ 20 mA
±10, 0 ~ 20 mA
±10, 0~20 mA
0 ~ 5, 0 ~ 10,
±5, ±10,
4 ~ 20 mA
0 ~ 5, 0 ~ 10, ±5,
4 ~ 20 mA
0 ~ 5, 0 ~ 10,
±5, ±10,
0 ~ 20 mA,
4 ~ 20 mA
Output Rate
Static update
Static update
Static update
Static update
Static update
Static update
DMA Transfer
-
-
-
-
-
-
16
16
16
-
Output Channels
16
(shared)
-
16
16
16
-
Input Channels
Digital I/O
DAQNavi
Driver
PCL-726
-
Data
Transfer
Modes
18-10
PCI-1727U
Onboard FIFO
Trigger
Modes
Timer/
Counter
PCI-1724U
Sampling Rate
Input
Ranges
Analog
Output
ISA
PCI-1723
Channels
-
-
-
-
-
Resolution
-
-
-
-
-
-
Max. Input Frequency
-
-
-
-
-
-
Isolation Voltage
-
1,500 VDC
-
-
-
2,500 VDC
Auto Calibration

-
-
-
-
-
BoardID Switch



-
-
-
Dimensions (mm)
175 x 100
175 x 100
175 x 100
337 x 112
337 x 112
185 x 120
Connector
68-pin
SCSI
DB62
2 x 2-pin, DB37
4 x 20-pin
2 x 20-pin, DB37
2 x DB9
Windows XP/2000






WinCE
-

-
-
-
-
Linux



-
-
-
Windows 8/7/Vista/XP/2000



-
-
-
WinCE
-
-
-
-
-
-
Linux
-


-
-
-
LabVIEW Driver






Page
19-33
19-31
19-33
online
online
online
Data Acquisition Boards
Selection Guide
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
WebAccess+ Solutions
Motion Control
Power & Energy
Automation
Non-Isolated Digital I/O
Category
PCI
Bus
Model
TTL DI/O
PCI-1735U
PCI-1737U
PCI-1739U
PCI-1751
PCI-1753
PCI-1755
PCI-1757UP
Input Channels
32
Output Channels
32
24
(shared)
48
(shared)
48
(shared)
96
(shared)
32
(shared)
24
(shared)
Sink
Current
24 mA @ 0.5V
24 mA @ 0.4 V
24 mA @ 0.4 V
24 mA @ 0.4 V
24 mA @ 0.44 V
24 mA @ 0.5V
24 mA @ 0.5 V
Source
Current
15 mA @ 2.0V
15 mA @ 2.4 V
15 mA @ 2.4 V
15 mA @ 2.4 V
24 mA @ 3.76 V
15 mA @ 2.0V
24 mA @ 3.7 V
Channels
-
-
-
-
-
-
-
Isolation
Voltage
-
-
-
-
-
-
-
Input
Range
-
-
-
-
-
-
-
Channels
-
-
-
-
-
-
-
Isolation
Voltage
-
-
-
-
-
-
-
Output
Range
-
-
-
-
-
-
-
Max. Sink
Current
-
-
-
-
-
-
-
Output
Channel
Input
Isolated
DI/O
Output
Timer/
Counter
Advanced
Function
Legacy
Driver
DAQNavi
Driver
Intelligent Operator
Panel
Automation Panels
Panel PCs
Channels
3
-
-
3
-
3
-
Resolution
16 bits
-
-
16 bits
-
16 bits
-
Max. Input Frequency
10 MHz
-
-
10 MHz
-
10 MHz
-
Pattern Match
-
-
-
-


-
Change of State
-
-
-
-


-
BoardID Switch







Channel-Freeze
Function
-
-
-
-
-

-
Output Status Read
Back





-

-




-

Dimensions (mm)
175 x 100
175 x 100
175 x 100
175 x 100
175 x 100
175 x 100
120 x 65
Connector
Dry/Wet Contact*
Automation Software
5 x 20-pin
1 x 50-pin
2 x 50-pin
68-pin SCSI
100-pin SCSI
100-pin SCSI-II
1 x DB25
Windows XP/2000







WinCE
-
-
-
-
-
-
-
Linux





-

Windows 8/7/Vista/
XP/2000





-

WinCE
-
-
-
-
-
-
-
Linux
-
-
-

-
-
-
LabVIEW Driver







Page
19-34
19-34
19-34
19-35
19-36
19-37
19-38
* Dry/wet contact can be mixed at the same time within one group.
Industrial Wireless
Solutions
Industrial Ethernet
Solutions
Industrial Gateway
Solutions
Serial communication
cards
Embedded Automation
PCs
DIN-Rail IPCs
CompactPCI Systems
IoT Wireless I/O
Modules
IoT Ethernet I/O
Modules
RS-485 I/O Modules
Data Acquisition
Boards
Online Download www.advantech.com/products
18-11
Digital I/O & Counter Card
Selection Guide
Non-Isolated Digital I/O
Category
ISA
PC/104
PCI-104
PCL-720+
PCL-722
PCL-724
PCL-731
PCM-3724
PCM-3753I
Input Channels
32
Output Channels
32
144
(shared)
24 (shared)
48 (shared)
48 (shared)
96 (shared)
Bus
TTL DI/O
Model
Output
Channel
Sink Current
24 mA @ 0.5 V
24 mA @ 0.4 V
24 mA @ 0.4 V
24 mA @ 0.4 V
24 mA @ 0.5 V
24 mA @ 0.4 V
Source Current
15 mA @ 2.0 V
-15 mA @ 2.4 V
15 mA @ 2.4 V
15 mA @ 2.4 V
15 mA @ 2.0 V
15 mA @ 2.4 V
Channels
-
-
-
-
-
-
Isolation
Voltage
-
-
-
-
-
-
Input Range
-
-
-
-
-
-
Channels
-
-
-
-
-
-
Isolation
Voltage
-
-
-
-
-
-
Output Range
-
-
-
-
-
-
Isolated DI/O
Input
Output
DAQNavi
Driver
Legacy
Driver
Advanced Function
Timer/
Counter
Max. Sink
Current
-
-
-
-
-
-
Channels
3
-
-
-
-
-
Resolution
16 bits
-
-
-
-
Max. Input Frequency
1 MHz
-
-
-
-
-
Pattern Match
-
-
-
-
-

Change of State
-
-
-
-
-

BoardID Switch
-
-
-
-
-
-
Channel-Freeze Function
-
-
-
-
-
-
Output Status Read Back
-





-
-
-
-
-
-
Dimensions (mm)
185 x 100
334 x 100
125 x 100
185 x 100
96 x 90
96 x 90
Connector
4 x 50-pin
Dry/Wet Contact*
5 X 20-pin
6 x 50-pin
1 x 50-pin
2 x 50-pin
2 x 50-pin
Windows XP/2000






WinCE
-
-
-
-


Linux
-
-
-
-


Windows 8/7/Vista/XP/2000
-
-
-
-


WinCE
-
-
-
-
-
-
Linux
-
-
-
-
-
-
LabVIEW Driver






Page
online
online
online
online
19-49
19-48
* Dry/wet contact can be mixed at the same time within one group.
18-12
Data Acquisition Boards
Selection Guide
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
WebAccess+ Solutions
Motion Control
Power & Energy
Automation
Isolated Digital I/O
Category
TTL DI/O
Model
PCIE-1730
PCIE-1752
PCIE-1754
PCIE-1756
PCIE-1760
PCIE-1751
PCIE-1753
Input Channels
16
-
-
-
-
Output Channels
16
-
-
-
-
48
(shared)
96
(shared)
Sink Current
24 mA @ 0.5 V
-
-
-
-
15 mA @ 0.8 V
15 mA @ 0.8 V
Source Current
15 mA @ 2.4 V
-
-
-
-
15 mA @ 2.0 V
15 mA @ 2.0 V
Channels
16
-
64
32
8
-
-
Isolation Voltage
2,500 VDC
-
2,500 VDC
2,500 VDC
2,500 VDC
-
-
Input Range
10 ~ 30 VDC
-
10 ~ 30 VDC
10 ~ 30 VDC
4.5 ~ 12 VDC
-
-
Channels
16 (Sink)
64 (Sink)
-
32 (Sink)
6 x Form A
2 x Form C
-
-
Isolation Voltage
2,500 VDC
2,500 VDC
-
2,500 VDC
2,500 VDC
-
-
Output Range
5 ~ 40 VDC
5 ~ 40 VDC
-
5 ~ 40 VDC
-
-
Max. Sink
Current
500 mA
500 mA
-
500 mA
-
-
Channels
-
-
-
-
8 x UP CTR
2 x PWM
3
-
Resolution
-
-
-
-
16 bits
32 bits
-
Output
Channel
Legacy
Driver
Advanced Function
Timer/
Counter
Isolated DI/O
Input
DAQNavi
Driver
Non-isolated Digital I/O
PCI Express
Bus
Output
1 A @ 125 VAC
2 A @ 30 VAC
Max. Input Frequency
-
-
-
-
500 Hz
10 MHz
-
Pattern Match
-
-
-
-



Change of State
-
-
-
-




BoardID Switch






Channel-Freeze Function


-

-
-
-
Output Status Read Back


-





-
-
-
-


Dimensions (mm)
168 x 100
168 x 100
168 x 100
168 x 100
168 x 100
168 x 100
168 x 100
Connector
1 x DB37
4 x 20-pin
100-pin SCSI
100-pin SCSI
100-pin SCSI
1 x DB37
68-pin SCSI
68-pin SCSI
Windows XP/2000
-
-
-
-
-
-
-
WinCE
-
-
-
-
-
-
-
Dry/Wet Contact*
Linux
-
-
-
-
-
-
-
Windows 8/7/Vista/XP/2000







WinCE
-
-
-
-
-
-
-
-
-
-
-

-
-
LabVIEW Driver







Page
19-17
19-19
19-19
19-19
19-20
19-18
19-18
Linux
* Dry/wet contact can be mixed at the same time within one group.
Automation Software
Intelligent Operator
Panel
Automation Panels
Panel PCs
Industrial Wireless
Solutions
Industrial Ethernet
Solutions
Industrial Gateway
Solutions
Serial communication
cards
Embedded Automation
PCs
DIN-Rail IPCs
CompactPCI Systems
IoT Wireless I/O
Modules
IoT Ethernet I/O
Modules
RS-485 I/O Modules
Data Acquisition
Boards
Online Download www.advantech.com/products
18-13
Digital I/O & Counter Card
Selection Guide
Isolated Digital I/O
Category
PCI
Bus
TTL DI/O
Model
PCI-1730U
PCI-1733
PCI-1734
PCI-1750
PCI-1752U
PCI-1754
Input Channels
16
-
-
-
-
-
Output Channels
16
-
-
-
-
-
Sink Current
24 mA @ 0.5 V
-
-
-
-
-
Source Current
15 mA @ 2.4 V
-
-
-
-
-
Channels
16
32
-
16
-
64
Output
Channel
DAQNavi
Driver
Legacy
Driver
Advanced Function
Timer/
Counter
Isolated DI/O
Input
Output
Isolation Voltage
2,500 VDC
2,500 VDC
-
2,500 VDC
-
2,500 VDC
Input Range
5 ~ 30 VDC
5 ~ 30 VDC
-
5 ~ 50 VDC
-
10 ~ 50 VDC
Channels
16 (Sink)
-
32 (Sink)
16 (Sink)
64 (Sink)
-
Isolation Voltage
2,500 VDC
-
2,500 VDC
2,500 VDC
2,500 VDC
-
Output Range
5 ~ 40 VDC
-
5 ~ 40 VDC
5 ~ 40 VDC
5 ~ 40 VDC
-
Max. Sink
Current
300 mA
-
200 mA
200 mA
200 mA
-
Channels
-
-
-
1
-
-
Resolution
-
-
-
16 bits
-
-
Max. Input Frequency
-
-
-
1 MHz
-
-
Pattern Match
-
-
-
-
-
-
Change of State
-
-
-
-
-
-
BoardID Switch



-


Channel-Freeze Function

-
-
-

-
Output Status Read Back

-

-

-


-

-
-
Dimensions (mm)
175 x 100
175 x 100
175 x 100
175 x 100
175 x 100
175 x 100
Connector
1 x DB37
4 x 20-pin
1 x DB37
1 x DB37
1 x DB37
100-pin SCSI
100-pin SCSI
Windows XP/2000






WinCE

-




Linux






Windows 8/7/Vista/XP/2000






WinCE
-
-
-
-
-
-
Linux

-
-


-
LabVIEW Driver






Page
19-39
19-39
19-39
19-40
19-41
19-41
Dry/Wet Contact*
* Dry/wet contact can be mixed at the same time within one group.
18-14
Data Acquisition Boards
Selection Guide
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
WebAccess+ Solutions
Motion Control
Power & Energy
Automation
Isolated Digital I/O
Category
PCI
Bus
TTL DI/O
Model
PCI-1756
PCI-1758UDI
PCI-1758UDO
PCI-1758UDIO
PCI-1760U
PCI-1761
PCI-1762
Input Channels
-
-
-
-
-
-
-
Output Channels
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Output
Channel
DAQNavi
Driver
Legacy
Driver
Advanced Function
Timer/Counter
Isolated DI/O
Input
Output
Sink Current
Source Current
-
-
-
-
-
-
-
Channels
32
128
-
64
8
8
16
Isolation Voltage
2,500 VDC
2,500 VRMS
-
2,500 VDC
2,500 VDC
3,750 VDC
2,500 VDC
Input Range
10 ~ 50 VDC
5 ~ 25 VDC
-
5 ~ 25 VDC
4.5 ~ 12 VDC
5 ~ 50 VDC
10 ~ 50 VDC
Channels
32 (Sink)
-
128
64
6 x Form A
2 x Form C
4 x Form A
4 x Form C
16**
Isolation Voltage
2,500 VDC
-
2,500 VRMS
2,500 VDC
2,500 VDC
2,500 VDC
2,500 VDC
Output Range
5 ~ 40 VDC
-
5 ~ 40 VDC
5 ~ 40 VDC
Max. Sink
Current
200 mA
-
90 mA
90 mA
1 A @ 125 VAC
2 A @ 30 VDC
8 A @ 250 VAC
2 A @ 30 VDC
0.25 A @ 250 VAC
2 A @ 30 VDC
-
-
-
-
8 x Up CTR
2 x PWM
-
-
-
-
Channels
Resolution
-
-
-
-
16 bits
(2,500 Isolation)
Max. Input Frequency
-
-
-
-
500 Hz for Up
CTR
-
-
Pattern Match
-
-
-
-

-
-
Change of State
-
-
-
-

-
-
BoardID Switch







Channel-Freeze Function

-
-
-
-
-

Output Status Read Back

-





Dry/Wet Contact*
-
-
-
-
-
-
-
Dimensions (mm)
175 x 100
175 x 100
175 x 100
175 x 100
175 x 100
175 x 100
175 x 100
Connector
100-pin SCSI
Dual 100-pin
mini-SCSI
Dual 100-pin
mini-SCSI
Dual 100-pin
mini-SCSI
1 x DB37
1 x DB37
1 x DB62
Windows XP/2000
-



-


WinCE







Linux
-


v
-


Windows 8/7/Vista/XP/2000







WinCE
-
-
-
-
-
-
-
Linux
-



-


LabVIEW Driver







Page
19-41
19-42
19-42
19-42
19-43
19-43
19-43
Automation Software
Intelligent Operator
Panel
Automation Panels
Panel PCs
Industrial Wireless
Solutions
Industrial Ethernet
Solutions
Industrial Gateway
Solutions
Serial communication
cards
Embedded Automation
PCs
DIN-Rail IPCs
CompactPCI Systems
IoT Wireless I/O
Modules
IoT Ethernet I/O
Modules
* Dry/wet contact can be mixed at the same time within one group.
RS-485 I/O Modules
Data Acquisition
Boards
Online Download www.advantech.com/products
18-15
Digital I/O & Counter Card
Selection Guide
Isolated Digital I/O
Category
ISA
ISA
PC/104
PCL-735
PCM-3725
PCM-3730
PCM-3730I
PCM-3761I
PCI-1780U
PCL-836
PCM-3780
Input Channels
-
-
8
16
-
-
8
16
Output Channels
-
-
8
16
-
-
8
16
24
(shared)
Sink
Current
-
-
-
0.5 V @ 8
mA
-
-
24 mA @
0.5 V
8 mA @
0.5 V
24 mA @
0.5 V
Source
Current
-
-
-
0.4 mA @
2.4 V
-
-
15 mA @
2.4 V
0.4 mA @
2.4 V
15 mA @
2.0 V
Channels
8
-
8
8
16
8
-
-
-
Isolation
Voltage
1,500 VDC
-
2,500 VDC
2,500 VDC
2,500 VDC
2,500 VDC
-
-
-
Input
Range
5 ~ 24 VDC
-
10 ~ 50 VDC
5 ~ 24 VDC
5 ~ 30 VDC
5 ~ 30 VDC
-
-
-
Channels
4 x Form A
4 x Form C
12 x Form C
8 x Form C
8
16
8 x Form C
-
-
-
Isolation
Voltage
1,000 VDC
1,000 VDC
2,000 VDC
2,500 VDC
2,500 VDC
2,000 VDC
-
-
-
0.5A @ 120
VAC
1A @ 30
VDC
1A @ 125 VAC
2A @ 30 VDC
0.25A @
240 VDC
1A @ 30 VDC
5 ~ 40 VDC
5 ~ 30 VDC
-
-
-
200 mA
300 mA
0.25 A @
250 VAC
2 A @ 30 VDC
-
-
-
Channels
-
-
-
-
-
-
8 x CTR
6 x CTR
3 x PWM
2
Resolution
-
-
-
-
-
-
16 bits
16 bits
16 bits
Max. Input Frequency
-
-
-
-
-
-
20 MHz
10 MHz
20 MHz
Pattern Match
-
-
-
-
-
-
-
-
-
Change of State
-
-
-
-
-
-
-
-
-
BoardID Switch
-
-
-
-
-


-
-
Channel-Freeze
Function
-
-
-
-
-
-
-
-
-
Output Status Read
Back
-
-
-
-
-

-
-
-
Model
TTL DI/O
Output
Channel
Input
Isolated
DI/O
Output
Output
Range
Max. Sink
Current
Timer/
Counter
Advanced
Function
PC/104
PCI-104
PCI
-
-
-
-
-
-
-
-
-
Dimensions (mm)
147 x 95
155 x 100
96 x 90
96 x 90
96 x 90
96 x 90
175 x 100
185 x 100
96 x 90
Connector
1 x DB37
1 x DB37
1 x 20-pin
1 x 50-pin
3 x 20-pin
2 x 20-pin
1 x 20-pin
1 x 50-pin
68-pin SCSI
1 x DB37
2 x 20-pin
1 x 50-pin
1 x 20-pin
Windows XP/2000









WinCE
-
-




-
-

Linux
-
-





-
-
Windows 8/7/Vista/
XP/2000
-
-





-

WinCE
-
-
-
-
-
-
-
-
-
Linux
-
-
-
-
-

-
-
-
LabVIEW I/O Driver









Page
online
online
19-50
19-50
19-50
19-48
19-44
online
19-50
DAQNavi
Driver
Legacy
Driver
Dry/Wet Contact*
* Dry/wet contact can be mixed at the same time within one group.
** Jumper selectable Form A/Form B-type relay output
18-16
Counter
PCL-725
Bus
Data Acquisition Boards
PCIE-1730
32-ch TTL and 32-ch Isolated Digital I/O
PCI Express Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
WebAccess+ Solutions
ƒƒ 32-ch isolated DI/O (16-ch digital input, 16-ch digital output)
ƒƒ 32-ch TTL DI/O (16-ch digital input,16-ch digital output)
ƒƒ High output driving capacity
ƒƒ Interrupt handling capability
ƒƒ 2 x 20-pin connectors for isolated DI/O channels and 2 x 20-pin connectors
for TTL DI/O channels
ƒƒ D-type connector for isolated input and output channels
ƒƒ High-voltage isolation on output channels (2,500 VDC)
Motion Control
Power & Energy
Automation
Automation Software
Intelligent Operator
Panel
Automation Panels
RoHS
COMPLIANT
2002/95/EC
Introduction
Panel PCs
PCIE-1730 offers isolated digital input channels as well as isolated digital output channels with isolation protection up to 2,500 VDC, which makes them ideal for industrial applications
where high-voltage isolation is required. There are also 32 TTL digital I/O channels on PCIE-1730.
Industrial Wireless
Solutions
Specifications
Digital Input
General
ƒƒ Channels ƒƒ Compatibility ƒƒ Input Voltage ƒƒ Bus Type ƒƒ I/O Connectors 16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
ƒƒ Interrupt Capable Ch. 2 (DI0, DI8)
Isolated Digital Input
ƒƒ Channels ƒƒ Input Voltage ƒƒ
ƒƒ
ƒƒ
ƒƒ
16
Logic 0: 3 V max.
Logic 1: 10 V min. (30 V max.)
Interrupt Capable Ch. 2 (IDI0, IDI8)
Isolation Protection 2,500 VDC
Opto-Isolator Response 50 μs
Input Resistance 2.7 kW @ 1 W
ƒƒ Output Capability 16
5 V/TTL
Logic 0: 0.5V max.
Logic 1: 2.4V min.
Sink: 24mA @ 0.5V
Source: 15mA @ 2.4V
Isolated Digital Output
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCI Express V1.0
1 x DB37 female connector
4 x 20-pin box header
Dimensions (L x H) 168 x 100 mm (6.6" x 3.9")
Power Consumption Typical:3.3 V @ 280 mA, 12 V @ 330 mA
Max.: 3.3 V @ 420 mA, 12 V @ 400 mA
Operating Temperature 0 ~ 60°C (32 ~ 140°F)
Storage Temperature -25 ~ 85°C (-13 ~ 185°F)
Storage Humidity 5 ~ 95% RH, non-condensing
Ordering Information
ƒƒ PCIE-1730 32-ch Isolated Digital I/O PCIe Card
Accessories
Digital Output
ƒƒ Channels ƒƒ Compatibility ƒƒ Output Voltage ƒƒ
ƒƒ
Industrial Ethernet
Solutions
Channels 16
Output Type Sink type (NPN)
Isolation Protection 2,500 VDC
Output Voltage 5 ~ 40 VDC
Sink Current 500 mA max./channel
Opto-Isolator Response 50 µs
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCL-10120-1E PCL-10120-2E ADAM-3920 PCLD-782 PCLD-885 PCLD-785 ADAM-3937 PCL-10137-1E PCL-10137-2E PCL-10137-3E 20-pin Flat Cable, 1 m
20-pin Flat Cable, 2 m
20-pin DIN-rail Flat Cable Wiring Board
16-ch Isolated DI Board w/ 1m 20-pin Flat Cable
16-ch Power Relay Board w/ 20p & 50p Flat Cables
16-ch Relay Board w/ One 1m 20-pin Flat Cable
DB37 DIN-rail Wiring Board
DB37 Cable, 1 m
DB37 Cable, 2 m
DB37 Cable, 3 m
Industrial Gateway
Solutions
Serial communication
cards
Embedded Automation
PCs
DIN-Rail IPCs
CompactPCI Systems
IoT Wireless I/O
Modules
IoT Ethernet I/O
Modules
RS-485 I/O Modules
Data Acquisition
Boards
Online Download www.advantech.com/products
18-17
PCIE-1751
PCIE-1753
48-ch Digital I/O and 3-ch Counter PCI
Express Card
96-ch Digital I/O PCI Express Card
Features
ƒƒ Emulates mode 0 of 8255 PPI (every port with nibble)
ƒƒ Buffered circuits for higher driving capacity than the 8255
ƒƒ Interrupt handling capability
ƒƒ Timer/Counter interrupt capability
ƒƒ Supports both dry and wet contact
ƒƒ Keeps the I/O port setting and DO state after system reset
ƒƒ BoardID switch
ƒƒ Pattern match interrupt function for DI
ƒƒ "Change of state" interrupt function for DI
ƒƒ Programmable digital filter function for DI
ƒƒ Output status read back
PCIE-1751
PCIE-1753
RoHS
COMPLIANT
2002/95/EC
Introduction
PCIE-1751 is a 48-bit digital I/O card for the PCI Express bus. Its 48 channels are divided into six 8-bit I/O ports and users can configure each 4-channel per port (nibble) as input
or output via software. PCIE-1751 also provides three 32-bit counters..
Specifications
Ordering Information
ƒƒ PCIE-1751
Digital Input
ƒƒ Channels
ƒƒ Compatibility
ƒƒ Input Voltage
48 (shared with output)
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2 V min.
ƒƒ Interrupt Capable Ch. 6
Digital Output
ƒƒ Channels
ƒƒ Compatibility
ƒƒ Output Voltage
ƒƒ Output Capability
48 (shared with input)
5 V/TTL
Logic 0: 0.4 V max.
Logic 1: 2.4 V min.
Sink: 24mA @ 0.4 V
Source: 15mA @ 2.4 V
Counter/Timer
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Channels
Resolution
Compatibility
Max. Input Frequency
Reference Clock
3
3 x 32-bit counter
5 V/TTL
10 MHz
Internal: 20K / 200K / 2M / 20MHz
External Clock Frequency: 10 MHz
External Voltage Range: 5 V/TTL
General
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
Universal PCI Express
1 x 68-pin SCSI female connector
168 x 100 mm (6.6" x 3.9")
Typical: 3.3 V @ 850 mA
Max.: 3.3V @ 2.63 A
Note: The maximum power consumption includes
power consumption for +5 V output (on pin 34 and pin
68, with 0.5 A)
ƒƒ Operating Temperature 0~60°C ( 32~140°F )
ƒƒ Storage Temperature -20 ~ 70°C (-4 ~ 158°F)
ƒƒ Storage Humidity
5 ~ 95% RH, non-condensing
18-18
Data Acquisition Boards
48-ch Digital I/O and 3-ch Counter PCI Express
Accessories
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCL-10168-1E
PCL-10168-2E
ADAM-3968
ADAM-3968/20
ADAM-3968/50
PCLD-8751
PCLD-8761
PCLD-8762
68-pin SCSI Shielded Cable, 1 m
68-pin SCSI Shielded Cable, 2 m
68-pin DIN-rail SCSI Wiring Board
68-pin SCSI to 3 20-pin Box Header Board
68-pin SCSI to 2 50-pin Box Header Board
48-ch Isolated Digital Input Board
24-ch Replay/ Isolated Digital Input Board
48-ch Relay Board
Pin Assignment
PCIE-1752
PCIE-1754
PCIE-1756
64-ch Isolated Digital Output PCI Express
Card
64-ch Isolated Digital Input PCI Express
Card
64-ch Isolated Digital I/O PCI Express Card
Features
PCIE-1752/1756
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Wide output range (5 ~ 40 VDC)
High sink current on isolated output channels (500mA max./ch)
2,000 VDC ESD protection
High-voltage isolation (2,500 VDC)
Interrupt handling capability
PCIE-1754/1756
PCIE-1752
PCIE-1754
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCIE-1756
Wide input range (10 ~ 30 VDC)
Either +/- voltage input for DI by group
High over-voltage protection (70 VDC)
High-voltage isolation (2,500 VDC)
Output status read-back
Keeps the output settings and values after system hot reset
Channel-freeze function
COMPLIANT
2002/95/EC
Introduction
Specifications
Isolated Digital Input
General
ƒƒ Channels
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Isolated Digital Output
ƒƒ Channels ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCIE-1752: 64
PCIE-1756: 32
Output Type Sink (NPN)
Isolation Protection 2,500 VDC
Output Voltage 5 ~ 40 VDC
Sink Current 500 mA max./channel
Opto-isolator Response 50 µs
Power & Energy
Automation
Automation Software
Intelligent Operator
Panel
Panel PCs
The Advantech PCIE-1752, PCIE-1754 and PCIE-1756 series products offer 64 isolated digital input and output channels with 2,500 VDC isolation protection. They feature a wide input
range (10 ~ 30 VDC), wide output range (5 ~ 40 VDC) and high sink current (500mA max./channel) can make PCIE-1752/1754/1756 series products easily used in industrial automation
control systems. With the help of the latest Advantech driver - DAQNavi, users can perform the configuration and setting easily and efficiently in the programming.
ƒƒ
Motion Control
Automation Panels
RoHS
PCIE-1754: 64
PCIE-1756: 32
Input Voltage Logic 0: 3 V max.
Logic 1: 10 V min. (30 VDC max.)
Input Current 10 VDC @ 2.97 mA
20 VDC @ 6.35 mA
30 VDC @ 9.73 mA
Interrupt Capable Ch.
PCIE-1754: 4
PCIE-1756: 2
Isolation Protection 2,500 VDC
Overvoltage Protection 70 VDC
ESD Protection 2,000 VDC
Opto-Isolator Response 50 µs
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
WebAccess+ Solutions
Industrial Wireless
Solutions
Industrial Ethernet
Solutions
Bus Type I/O Connectors Dimensions (L x H) Power Consumption
PCI Express V1.0
1 x 100-pin SCSI female connector
168 x 100 mm (6.6" x 3.9")
PCIE-1752
Typical: 3.3 V @ 485 mA
Max.: 3.3 V @ 530 mA; 12V @ 90 mA
PCIE-1754
Typical: 3.3 V @ 285 mA
Max.: 3.3 V @ 330 mA
PCIE-1756
Typical: 3.3 V @ 385 mA
Max.: 3.3 V @ 430 mA; 12V @ 55 mA
ƒƒ Operating Temperature 0 ~ 60°C (32 ~ 140°F)
ƒƒ Storage Temperature -20 ~ 70°C (-4 ~ 158°F)
ƒƒ Storage Humidity 5 ~ 95% RH, non-condensing
Industrial Gateway
Solutions
Serial communication
cards
Embedded Automation
PCs
DIN-Rail IPCs
CompactPCI Systems
Ordering Information
ƒƒ PCIE-1752 ƒƒ PCIE-1754 ƒƒ PCIE-1756 64-ch Isolated Digital Output PCI Express Card
64-ch Isolated Digital Input PCI Express Card
64-ch Isolated Digital I/O PCI Express Card
Accessories
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCL-10250-1E PCL-10250-2E ADAM-3951 PCL-101100M-3E ADAM-39100 IoT Wireless I/O
Modules
IoT Ethernet I/O
Modules
100-pin SCSI to Two 50-pin SCSI Cable, 1 m
100-pin SCSI to Two 50-pin SCSI Cable, 2 m
50-pin DIN-rail Wiring Board w/ LED Indicators
100-pin SCSI to 100-pin SCSI Cable, 3 m
100-pin DIN-rail Wiring Board
RS-485 I/O Modules
Data Acquisition
Boards
Online Download www.advantech.com/products
18-19
PCIE-1760
8-ch Relay and 8-ch Isolated Digital
Input PCI Express Card
Features
ƒƒ 8 opto-isolated digital input channels with counter/timer function
ƒƒ 8 relay actuator output channels
ƒƒ 2 opto-isolated PWM outputs
ƒƒ LED indicators to show activated relays
ƒƒ Jumper selectable dry contact/wet contact input signals
ƒƒ Up event counters for DI
ƒƒ Programmable digital filter function for DI
ƒƒ Pattern match interrupt function for DI
ƒƒ "Change of state" interrupt function for DI
ƒƒ BoardID switch
RoHS
COMPLIANT
2002/95/EC
Introduction
PCIE-1760 relay actuator and isolated digital input card is a PC add-on card for the PCI Express bus. It meets the PCI Express standard Rev. 1.0. It provides 8 opto-isolated digital
inputs with isolation protection of 2,500 VDC for collecting digital inputs in noisy environments, 8 relay actuators that can be used as a on/off control devices or small power switches,
and 2 isolated PWM (Pulse Width Modulation) outputs for custom applications.
For easy monitoring, each relay is equipped with one red LED to show its on/off status. Each isolated input supports both dry contact and wet contact so that it can easily interface
with other devices when no voltage is present in the external circuit.
Specifications
Isolated Digital Input
General
ƒƒ Channels ƒƒ Input Voltage ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
8
Logic 0: 1.0 V max.
Logic 1: 4.5 V min. (12 V max.)
Interrupt Capable Ch. 8
Isolation Protection 2,500 VDC
Opto-Isolator Response 25 μs
Input Resistance 2 kW 1/4 W
Counter/Timer
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Channels Resolution Compatibility Max. Input Frequency Isolation Protection PWM Channels Digital Noise Filter 8
16 bits
5 V/TTL
500 Hz
2,500 VDC
2
Min. effective high input period ≥ [(2 ~ 65535) x 5 ms]
+ 5 ms
Min. effective low input period ≥ [(2 ~ 65535) x 5 ms]
+ 5 ms
Relay Output
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Channels 8
Relay Type 2 x Form C, and 6 x Form A
Contact Rating 1 A @ 125 VAC, 2 A @ 30 VDC
Max. Switching Power 125 VA, 60 W
Max. Switching Voltage 250 VAC, 220 VDC
Max. Switching Current 2 A
Operate/Release Time 5 / 3.5 ms max
Resistance Contact: 50 mW max.
Insulation: 100 MW min. @ 500 VDC
ƒƒ Life Expectancy 3 x 105 cycles min.: 2 A @ 30 VDC, 1 A @ 125 VAC
(Electrical)106 cycles min.: 1 A @ 30 VDC, 0.5 A @ 125 VAC
18-20
Data Acquisition Boards
Bus Type I/O Connectors Dimensions (L x H) Power Consumption PCI Express V1.0
1 x DB37 female connector
168 x 100 mm (6.6" x 3.9")
Typical: 5 V @ 450 mA
Max.: 5 V @ 850 mA
ƒƒ Operating Temperature 0 ~ 60°C (32 ~ 140°F)
ƒƒ Storage Temperature -20 ~ 70°C (-4 ~ 158°F)
ƒƒ Storage Humidity 5 ~ 95 % RH, non-condensing
Ordering Information
ƒƒ PCIE-1760 8-ch Relay/IDI PCIe Card w/ 10-ch Counter/Timer
Accessories
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCL-10137-1E PCL-10137-2E PCL-10137-3E ADAM-3937 DB37 Cable, 1 m
DB37 Cable, 2 m
DB37 Cable, 3 m
DB37 DIN-rail Wiring Board
PCIE-1810
800 kS/s, 12-bit, 16-ch PCI Express
Multifunction DAQ Car
Features
NEW
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
WebAccess+ Solutions
ƒƒ 16 analog inputs, up to 800 kS/s, 12-bit resolution
ƒƒ 2 analog outputs, up to 500 kS/s, 12-bit resolution
ƒƒ Support for digital trigger and analog trigger
ƒƒ 24 programmable digital I/O lines
ƒƒ Two 32-bit programmable counter/timers
ƒƒ Onboard FIFO memory (4k samples)
ƒƒ Automatic channel/gain scanning
Motion Control
Power & Energy
Automation
Automation Software
Intelligent Operator
Panel
Automation Panels
RoHS
COMPLIANT
2002/95/EC
Introduction
The PCIE-1810 is a multifunction PCI Express card that includes digital I/O, analog I/O and counter functions. It also features a 800 kS/s 12-bit A/D converter and supports analog
trigger for A/D data accquisition.
Industrial Wireless
Solutions
Specifications
Analog Input
Digital I/O
ƒƒ Channels
ƒƒ Channels
ƒƒ Compatibility
ƒƒ Input Voltage
Single-end 16-ch
Differential 8-ch
ƒƒ Resolution
12 bits
ƒƒ Sample Rate Single Channel 800 kS/s max.
Multi-Channel 500 kS/s max.
Note: The sampling rate for each channels will be affected by used channel number.
For example, if 4 channels of PCIE-1810 are used, the sampling rate is 500k/4 = 125 kS/s
per channel.
ƒƒ Trigger Reference
Digital Trigger,
Analog Trigger
ƒƒ Trigger Mode
Start trigger, Delay to Start trigger
Stop trigger, Delay to Stop trigger
ƒƒ FIFO Size
4k samples
ƒƒ Overvoltage Protection 30 Vp-p
ƒƒ Input Impedance
1 GΩ
ƒƒ Sampling Modes
Software and external clock
ƒƒ Input Range
Software programmable
Gain
Bipolar
Unipolar
Absolute Accuracy
(% of FSR)*
0.5
±10V
N/A
1
±5
0 ~ 10
2
±2.5
0~5
4
±1.25
0 ~ 2.5
8
±0.625
0 ~ 1.25
0.1
0.1
0.2
0.2
0.4
Analog Output
ƒƒ Channels
ƒƒ Resolution
ƒƒ Output Rate
ƒƒ Output Range
2
12 bits
Static- Software Polling
500 KS/s max.
Software programmable
Unipolar
Internal Reference
Bipolar
External Reference
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Slew Rate
Driving Capability
Operation Mode
Accuracy
Panel PCs
0~5V
0 ~ 10 V
-5 V ~ 5 V
-10 V ~ 10 V
0 ~ +x V @ -x V (-10 ≤ x ≤ 10)
20 V/µs
5 mA
Static update, Waveform generation
INLE: ± 1 LSB, DNLE: ± 1 LSB
ƒƒ Output Voltage
ƒƒ Output Capability
24
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Sink: 15 mA @ 0.8 V
Source: 15 mA @ 2.0 V
Counter
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Channels
Resolution
Compatibility
Max. Input Frequency
Pulse Generation
Timebase Stability
2
32 bits
5 V/TTL
10 MHz
Yes
50 ppm
General
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Form factor
Triggering
I/O Connector
Dimensions (L x W)
Power Consumption
PCI Express x 1
12 bits Analog x 2 / Digital x 2
68-pin SCSI female connector
167 x 100 mm
Typical: 3.3 V @ 488 mA
12 V @ 112 mA
Max.: 3.3 V @ 2.25 A
12 V @ 390 mA
ƒƒ Operating Temperature 0 ~ 60°C (32 ~ 140°F) (refer to IEC 60068-2-1, 2)
ƒƒ Storage Temperature -40 ~ 70°C (-40 ~ 158°F)
ƒƒ Storage Humidity
5 ~ 95% RH non-condensing (refer to IEC 60068-2-3)
Ordering Information
ƒƒ PCIE-1810
800 kS/s, 12-bit Multifunction Card
Accessories
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCL-10168H-1E
PCL-10168H-2E
PCL-10168-1E
PCL-10168-2E
ADAM-3968
68-pin SCSI Shielded Cable with Noise Rejecting, 1 m
68-pin SCSI Shielded Cable with Noise Rejecting, 2 m
68-pin SCSI Shielded Cable, 1 m
68-pin SCSI Shielded Cable, 2 m
68-pin DIN-rail SCSI Wiring Board
Online Download www.advantech.com/products
Industrial Ethernet
Solutions
Industrial Gateway
Solutions
Serial communication
cards
Embedded Automation
PCs
DIN-Rail IPCs
CompactPCI Systems
IoT Wireless I/O
Modules
IoT Ethernet I/O
Modules
RS-485 I/O Modules
Data Acquisition
Boards
18-21
PCIE-1816
PCIE-1816H
1 MS/s, 16-bit, 16-ch PCI Express
Multifunction DAQ Card
5 MS/s, 16-bit, 16-ch PCI Express
Multifunction DAQ Card
Features
NEW
PCIE-1816
ƒƒ 16 analog inputs, up to 1 MS/s, 16-bit resolution
PCIE-1816H
ƒƒ 16 analog inputs, up to 5 MS/s, 16-bit resolution
PCIE-1816/1816H
ƒƒ 2 analog outputs up to 3 MS/s, 16-bit resolution
ƒƒ Support Analog and Digital Trigger for AI/O
ƒƒ Support Waveform generation for AO
ƒƒ 24 programmable digital I/O lines
ƒƒ Two 32-bit programmable counter/timers
ƒƒ Onboard FIFO memory (4k samples)
ƒƒ Support for Microsoft Windows 8 (desktop mode only)/7/XP
RoHS
COMPLIANT
2002/95/EC
Introduction
PCIE-1816/1816H is a 16-ch, up to 5 MS/s multi-function DAQ card and integrates digital I/O, analog I/O, and counter functions. The PCIE-1816/1816H also features analog and
digital triggering, 2-ch 16 bit analog outputs with waveform generation capability, 24-ch programmable digital I/O lines, and two 32-bit general-purpose timer/counters.
Specifications
Analog Input
Digital I/O
ƒƒ Channels
ƒƒ Channels
ƒƒ Compatibility
ƒƒ Input Voltage
Single-end 16-ch
Differential 8-ch
ƒƒ Resolution
16 bits
ƒƒ Sample Rate PCIE-1816
Single Channel 1 MS/s max.
Multi-Channel 500 kS/s max.
PCIE-1816H
Single Channel 5 MS/s max.
Multi-Channel 1 MS/s max.
Note: The sampling rate for each channels will be affected by used channel number.
For example, if 4 channels of PCIE-1816H are used, the sampling rate is 1M/4 = 250 kS/s
per channel.
ƒƒ Trigger Reference
Analog Trigger, Digital Trigger
ƒƒ FIFO Size
4k samples
ƒƒ Overvoltage Protection 30 Vp-p
ƒƒ Input Impedance
1 GΩ
ƒƒ Sampling Mode
Software and external clock
ƒƒ Input Range
Software programmable
PCIE-1816
Gain
Bipolar
Unipolar
Absolute Accuracy ( % of FSR)*
Channels
Resolution
Output Rate
Output Range
1
±5
0 ~ 10
0.0075
2
±2.5
0~5
0.0075
4
±1.25
0 ~ 2.5
0.008
2
16 bits
3 MS/s max.
Software programmable
Unipolar
Internal Reference
Bipolar
External Reference
ƒƒ
ƒƒ
ƒƒ
ƒƒ
18-22
Slew Rate
Driving Capability
Operation Mode
Accuracy
ƒƒ Output Capability
Counter
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Channels
Resolution
Compatibility Max. Input Frequency Pulse Generation Timebase Stability 2
32 bits
5 V/TTL
10 MHz
Yes
50 ppm
General
0.5
±10V
N/A
0.0075
Analog Output
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ Output Voltage
24
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Sink: 15 mA @ 0.8 V
Source: 15 mA @ 2.0 V
0~5V
0 ~ 10 V
-5 V ~ 5 V
-10 V ~ 10 V
0 ~ +x V @ -x V (-10 ≤ x ≤ 10)
20 V/µs
5 mA
Static update, Waveform Generation
INLE: ± 4 LSB, DNLE: ± 1 LSB
Data Acquisition Boards
8
±0.625
0 ~ 1.25
0.008
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Form factor
Triggering
I/O Connector
Dimensions (L x W)
Power Consumption
PCI Express x 1
16 bits Analog x 2 / Digital x 2
68-pin SCSI female connector
167 x 100 mm
Typical:3.3 V @ 488 mA
12 V @ 112 mA
Max.: 3.3 V @ 2.25 A
12 V @ 390 mA
ƒƒ Operating Temperature 0 ~ 60°C (32 ~ 140°F)
ƒƒ Storage Temperature -40 ~ 70°C (-40 ~ 158°F)
ƒƒ Storage Humidity
5 ~ 95% RH non-condensing
Ordering Information
ƒƒ PCIE-1816
ƒƒ PCIE-1816H
1 MS/s, 16-bit Multifunction Card
5 MS/s, 16-bit Multifunction Card
Accessories
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCL-10168H-1E
PCL-10168H-2E PCL-10168-1E PCL-10168-2E ADAM-3968 68-pin SCSI Shielded Cable with Noise Rejecting, 1 m
68-pin SCSI Shielded Cable with Noise Rejecting, 2 m
68-pin SCSI Shielded Cable, 1 m
68-pin SCSI Shielded Cable, 2 m
68-pin DIN-rail SCSI Wiring Board
PCIE-1802
8-ch, 24-Bit, 216 kS/s Dynamic Signal
Acquisition PCI Express Card
Features
Preliminary
ƒƒ 8 simultaneously sampled analog inputs up to 216 kS/s
ƒƒ 24-bit resolution ADCs with 115 dB dynamic range
ƒƒ Wide input ranges from ±0.2 V to ±10 V
ƒƒ Built-in anti-aliasing filter
ƒƒ Software configurable 4 or 10 mA Integrated Electronic Piezoelectric Excitation
(IEPE)
ƒƒ Software selectable AC/DC coupling
ƒƒ Full auto-calibration
ƒƒ Multiple card synchronization
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
WebAccess+ Solutions
Motion Control
Power & Energy
Automation
Automation Software
Intelligent Operator
Panel
Automation Panels
RoHS
COMPLIANT
2002/95/EC
Introduction
Panel PCs
The Advantech PCIE-1802 is a 24-bit high-accuracy data acquisition PCI Express module specifically designed for sound and vibration applications. This module has built-in 4 or
10 mA excitation currents for IEPE sensors such as accelerometers and microphones.
Specifications
Pin Assignments
CN601
Analog Input
ƒƒ Channels
8 (simultaneously sample, differential or 50 Ω
pseudo-differential)
ƒƒ Resolution
24 bits (Delta-sigma)
ƒƒ Max. Sampling Rate 100 S/s to 204.8 kS/s (with resolution ≤ 363.80 μS/s)
ƒƒ Input Coupling
AC/DC, selectable per channel
ƒƒ AC Cut-Off Frequency 0.016 Hz (-3 dB)
ƒƒ DC Offset Adjustment ±50 % of input range
ƒƒ Trigger Modes
Start trigger, Delay to Start trigger
Stop trigger, Delay to Stop trigger
ƒƒ Input Range
±0.2, ±0.5, ±1, ±2, ±5, ±10 Vpp
ƒƒ Offset Error < ±0.002 %
ƒƒ Gain Error
< ±0.2 %
ƒƒ Total Harmonic
Distortion (THD)
100 dB
ƒƒ Dynamic Range 115 dB
ƒƒ IEPE Excitation 0, 4, or 10 mA, selectable per channel
(open/short detect)
ƒƒ Data Transfer Direct memory access (DMA)
ƒƒ Multiple Card For more than 8 AI channels
Synchronization Serial communication
cards
Embedded Automation
PCs
CN600
1 (edge detect, noise filter)
2
General
CompactPCI Systems
IoT Ethernet I/O
Modules
PCI Express x1
CN600 36-pin Mini-SCSI (for AI)
CN601 HDMI (for clock, trigger, and DI/Os)
Dimensions (L x H) 175 x 100 mm (6.9” x 3.9”)
Operating Temperature 0 ~ 60°C (32 ~ 140°F)
Storage Temperature -40 ~ 70°C (40 ~ 158°F)
Storage Humidity 5 ~ 95 % RH, non-condensing
RS-485 I/O Modules
Data Acquisition
Boards
Ordering Information
ƒƒ PCI-1802
DIN-Rail IPCs
IoT Wireless I/O
Modules
ƒƒ Bus Type ƒƒ I/O Connectors ƒƒ
ƒƒ
ƒƒ
ƒƒ
Industrial Ethernet
Solutions
Industrial Gateway
Solutions
Digital Input/Output
ƒƒ DI Channels ƒƒ DO Channels Industrial Wireless
Solutions
8-ch, 24-Bit, 216 kS/s Dynamic Signal Acquisition PCI
Express Card
Online Download www.advantech.com/products
18-23
PCIE-1840
4-ch 16-Bit 125 MS/s High-Speed PCI
Express Digitizer
Features
NEW
ƒƒ 4 simultaneously sample analog inputs, up to 125 MS/s, 16-bit resolution
ƒƒ 500 MS/s Time Interleaved Sampling
ƒƒ Non-stop data streaming capable
ƒƒ 2 GB on-board memory
ƒƒ 1M or 50 Ohm selectable input impedance
ƒƒ On-Board tunable anti-aliasing filter
ƒƒ AC/DC Coupling
RoHS
COMPLIANT
2002/95/EC
Introduction
The PCIE-1840 high-speed digitizers feature four 125 MS/s simultaneously sampled analog input channels with 16-bit resolution, 100 MHz bandwidth, and up to 2 GB of memory
in a PCI Express device.
Specifications
Ordering Information
ƒƒ PCIE-1840
Analog Input
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Channels
4 single-ended , simultaneously sampling
Resolution
16 bits
Max. Sampling Rate 125 MS/s per channel
Memory Size
2GB
Over Voltage Protection
30 Vp-p
Input Impedance
50 Ω / 1M Ω
Input Coupling
AC/DC (only for 1MΩ input impedance)
Sampling Modes
Software and external clock
Trigger Modes
Start trigger, Delay to Start trigger
Stop trigger, Delay to Stop trigger
ƒƒ Input Range
0.2 / 0.4 / 1 / 2 / 4 / 10 /
20 Vpp (input Impedance must be 1 MΩ)
ƒƒ Time Interleaved Sampling - 4 channels combined, 500 MSPS max.
- 2 channels combined, 250 MSPS max.
- No time interleaved, 125 MSPS max.
- Configured automatically by setting sampling
rate
General
ƒƒ Bus Type
ƒƒ I/O Connectors
ƒƒ
ƒƒ
ƒƒ
ƒƒ
18-24
Dimensions (L x H)
Operating Temperature Storage Temperature Storage Humidity
PCI Express x 4
4 x BNC connector (for AI)
1 x HDMI connector (for Ext. clock and trigger)
175 x 100 mm (6.9" x 3.9")
0 ~ 50°C (32 ~ 140°F)
-40 ~ 70°C (40 ~ 158°F)
5 ~ 95% RH, non-condensing
Data Acquisition Boards
4-ch 16Bit 125 MS/s High-Speed PCI Express Digitizer
Pin Assignments
PCI-1710U/UL
PCI-1710HGU
100 kS/s, 12-bit, 16-ch Universal PCI
Multifunction DAQ Card
100 kS/s, 12-bit, 16-ch Universal PCI
Multifunction DAQ Card with High Gain
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
WebAccess+ Solutions
ƒƒ 16-ch single-ended or 8-ch differential or a combination of analog input
ƒƒ 12-bit A/D converter, with up to 100 kHz sampling rate
ƒƒ Programmable gain
ƒƒ Automatic channel/gain scanning
ƒƒ Onboard FIFO memory (4,096 samples)
ƒƒ Two 12-bit analog output channels (PCI-1710U/HGU only)
ƒƒ 16-ch digital input and 16-ch digital output
ƒƒ Onboard programmable counter
ƒƒ BoardID™ switch
Motion Control
Power & Energy
Automation
Automation Software
Intelligent Operator
Panel
Automation Panels
RoHS
COMPLIANT
2002/95/EC
Specifications
Panel PCs
Analog Input
Digital Input
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ Channels
ƒƒ Compatibility
ƒƒ Input Voltage
Channels
16 single-ended/ 8 differential (software programmable)
Resolution
12 bits
FIFO Size
4,096 samples
Overvoltage Protection 30Vp-p
Input Impedance
1 GW
Sampling Modes
Software, onboard programmable pacer and external
Input Range (V, software programmable) & Absolute Accuracy
PCI-1710U/UL
Gain
Bipolar
Unipolar
Absolute Accuracy (% of FSR)*
PCI-1710HGU
Gain
Bipolar
Unipolar
Absolute Accuracy
(% of FSR)*
0.5
±10
N/A
0.1
1
±5
0 ~ 10
0.1
2
±2.5
0~5
0.2
4
±1.25
0 ~ 2.5
0.2
8
±0.625
0 ~ 1.25
0.4
0.5
±10
N/A
1
±5
0 ~ 10
5
±1
N/A
10
±0.5
0~1
50
±0.1
N/A
100
±0.05
0 ~ 0.1
500
±0.01
N/A
1000
±0.005
0 ~ 0.01
0.1
0.1
0.2
0.2
0.4
0.4
0.8
0.8
PCI-1710HGU
Gain
0.5, 1, 2, 4, 8
0.5, 1
5, 10
20, 100
500, 1000
Max. Sampling Rate
100 kS/s
100 kS/s
35 kS/s
7 kS/s
770 S/s
Note: The sampling rate for each channels will be affected by used channel number.
For example, if 4 channels of PCI-1710U are used, the sampling rate is 100k/4 = 25
kS/s per channel.
Analog Output (PCI-1710U/HGU only)
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Channels
Resolution
Output Rate
Output Range
Internal Reference
External Reference
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Slew Rate
Driving Capability
Operation Mode
Accuracy
2
12 bits
Static update
(Software programmable)
Unipolar
Digital Output
ƒƒ Channels
ƒƒ Compatibility
ƒƒ Output Voltage
ƒƒ Output Capability
16
5 V/TTL
Logic 0: 0.4 V max.
Logic 1: 2.4 V min.
Sink: 8.0 mA @ 0.8 V
Source: 0.4 mA @ 2.0 V
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Channels
Resolution
Compatibility
Max. Input Frequency
0~5V
0 ~ 10 V
0 ~ +x V @ -x V (-10 ≤ x ≤ 10)
ƒƒ
ƒƒ
ƒƒ
ƒƒ
1
16 bits
5 V/TTL
1 MHz
Bus Type
I/O Connector
Dimensions (L x H)
Power Consumption
Universal PCI V2.2
1 x 68-pin SCSI female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 850 mA
Max.: 5 V @ 1.0 A
ƒƒ Operating Temperature 0 ~ 60°C (32 ~ 140°F)
ƒƒ Storage Temperature -20 ~ 70°C (-4 ~ 158°F)
ƒƒ Storage Humidity
5 ~ 95% RH non-condensing
Ordering Information
ƒƒ PCI-1710U
ƒƒ PCI-1710UL
ƒƒ PCI-1710HGU
100 kS/s, 12-bit Multifunction Card
100 kS/s, 12-bit Multifunction Card w/o AO
100 kS/s, 12-bit High-gain Multifunction Card
PCLD-8710
PCL-10168-1E
PCL-10168-2E
ADAM-3968
Industrial Ethernet
Solutions
Industrial Gateway
Solutions
Embedded Automation
PCs
DIN-Rail IPCs
CompactPCI Systems
IoT Wireless I/O
Modules
IoT Ethernet I/O
Modules
RS-485 I/O Modules
Accessories
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Industrial Wireless
Solutions
Serial communication
cards
Pacer/Counter
General
* ±1 LSB is added as the derivative for absolute accuracy
ƒƒ Maximum Sampling Rate
Model
PCI-1710U/UL
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
DIN-rail Wiring Board w/ CJC
68-pin SCSI Shielded Cable, 1 m
68-pin SCSI Shielded Cable, 2 m
68-pin DIN-rail SCSI Wiring Board
Data Acquisition
Boards
10 V/µs
3 mA
Static update
INLE: ±1 LSB, DNLE: ±1 LSB
Online Download www.advantech.com/products
18-25
PCI-1711U/UL
100 kS/s, 12-bit, 16-ch Universal PCI
Multifunction DAQ Card
Features
ƒƒ 16-ch single-ended analog input
ƒƒ 12-bit A/D converter, with up to 100 kHz sampling rate
ƒƒ Programmable gain
ƒƒ Automatic channel/gain scanning
ƒƒ Onboard FIFO memory (1,024 samples)
ƒƒ Two 12-bit analog output channels (PCI-1711U only)
ƒƒ 16-ch digital input and 16-ch digital output
ƒƒ Onboard programmable counter
RoHS
COMPLIANT
2002/95/EC
Specifications
Analog Input
Digital Output
ƒƒ Channels
16 single-ended
ƒƒ Resolution
12 bits
ƒƒ Max. Sampling Rate 100 kS/s
Note: The sampling rate for each channels will be affected by used channel number.
For example, if 4 channels are used, the sampling rate is 100k/4 = 25 kS/s per
channel.
ƒƒ Channels
ƒƒ Compatibility
ƒƒ Output Voltage
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
FIFO Size
1,024 samples
Overvoltage Protection 30 Vp-p
Input Impedance
2 MΩ/5 pF
Sampling Modes
Software, onboard programmable pacer, or external
Input Range (V, software programmable) & Absolute Accuracy
Bipolar
Absolute Accuracy (% of FSR)*
± 10
0.1
±5
0.1
± 2.5
0.2
± 1.25
0.2
± 0.625
0.4
* ±1 LSB is added as the derivative for absolute accuracy
Analog Output (PCI-1711U only)
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Channels
Resolution
Output Rate
Output Range
Internal Reference
External Reference
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Slew Rate
Driving Capability
Output Impedance
Operation Mode
Accuracy
2
12 bits
Static update
(Software programmable)
Unipolar
0 ~ 5 V, 0 ~ 10 V
0 ~ +x V @ -x V (-10 ≤ x ≤ 10)
11 V/µs
3 mA
0.81 Ω
Static update
INLE: ±0.5 LSB
DNLE: ±0.5 LSB
Digital Input
ƒƒ Channels
ƒƒ Compatibility
ƒƒ Input Voltage
18-26
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Data Acquisition Boards
ƒƒ Output Capability
16
5 V/TTL
Logic 0: 0.8 V
Logic 1: 2.0 V
Sink: 8.0 mA @ 0.8 V
Source: 0.4 mA @ 2.0 V
Pacer/Counter
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Channels
Resolution
Compatibility
Max. Input Frequency
Reference Clock
1
16 bits
5 V/TTL
10 MHz
Internal: 10 MHz
General
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Bus Type
Universal PCI V2.2
I/O Connector
1 x 68-pin SCSI female connector
Dimensions (L x H)
175 x 100 mm (6.9" x 3.9")
Power Consumption
PCI-1711U
Typical: 5 V @ 850 mA
Max.: 5 V @ 1.0 A
PCI-1711UL
Typical: 5 V @ 700 mA
Max.: 5 V @ 1.0 A
ƒƒ Operating Temperature 0 ~ 60°C (32 ~ 140°F)
ƒƒ Storage Temperature -20 ~ 70°C (-4 ~ 158°F)
ƒƒ Storage Humidity
5 ~ 95% RH non-condensing
Ordering Information
ƒƒ PCI-1711U
ƒƒ PCI-1711UL
Entry-level 100 kS/s, 12-bit Multifunction Card
Entry-level 100 kS/s, 12-bit Multi. Card w/o AO
Accessories
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCLD-8710
PCL-10168-1E
PCL-10168-2E
ADAM-3968
DIN-rail Wiring Board w/ CJC
68-pin SCSI Shielded Cable, 1 m
68-pin SCSI Shielded Cable, 2 m
68-pin DIN-rail SCSI Wiring Board
PCI-1712/L
1 MS/s, 12-bit, 16-ch PCI Multifunction
DAQ Card
Features
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
16 single-ended or 8 differential or a combination of analog inputs
12-bit A/D converter, with up to 1 MHz sampling rate
Programmable gain
Automatic channel/gain scanning
Onboard FIFO memory (AI: 1,024 samples AO: 32,768 samples)
Two 12-bit analog output channels with continuous waveform output function
(PCI-1712 only)
16-ch digital input or output (programmable)
Three 16-bit programmable multifunction counter/timers on 10 MHz
Auto-calibration (AI/AO)
PCI-Bus mastering data transfer
Pre-, post-, about- and delay-trigger data acquisition modes for analog input
channels
Flexible triggering and clocking capabilities
COMPLIANT
2002/95/EC
Specifications
Analog Input
Digital I/O
ƒƒ Channels
ƒƒ Compatibility
ƒƒ Input Voltage
16 single-ended/ 8 differential (software programmable)
12 bits
Multi-channel, single gain: 1 MS/s
Multi-channel, multi gain: 600 kS/s
Multi-channel, multi gain, unipolar/bipolar: 400 kS/s
ƒƒ FIFO Size
1,024 samples
Note: The sampling rate for each channels will be affected by used channel number.
For example, if 4 channels are used, the sampling rate is 600k/4 = 125 kS/s per
channel. (multi gain, without unipolar/bipolar mixed)
ƒƒ Overvoltage Protection 30 Vp-p
ƒƒ Input Impedance
100 MW/10 pF (Off), 100 MW/100 pF (On)
ƒƒ Sampling Modes
Software, onboard programmable pacer and external
ƒƒ Trigger Modes
Pre-trigger, post-trigger, delay-trigger and abouttrigger
ƒƒ Input Range (V, software programmable) & Absolute Accuracy
N/A
±10
0 ~ 10
±5
0~5
±2.5
0 ~ 2.5
±1.25
0 ~ 1.25
±0.625
0.1
0.1
0.2
0.2
0.4
* ±1 LSB is added as the derivative for absolute accuracy
Analog Output (PCI-1712 only)
Channels
Resolution
Output Rate
FIFO Size
Output Range
Internal Reference
External Reference
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Slew Rate
Driving Capability
Output Impedance
Operation Mode
Accuracy
Power & Energy
Automation
Automation Software
Intelligent Operator
Panel
Panel PCs
ƒƒ Channels
ƒƒ Resolution
ƒƒ Max. Sampling Rate
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Motion Control
Automation Panels
RoHS
Unipolar
Bipolar
Absolute Accuracy
(% of FSR)*
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
WebAccess+ Solutions
2
12 bits
1 MS/s max.
32,768 samples
(Software programmable)
Bipolar
Unipolar
±5 V, ±10 V
0 ~ 5 V, 0 ~ 10 V
0 ~ +x V @ +x V (-10 ≤ x ≤ 10)
-x ~ +x V @ +x V (-10 ≤ x ≤ 10)
20 V/µs
10 mA
0.1 Ω max.
Static update, waveform generation
INLE: ±1 LSB
DNLE: ±1 LSB
ƒƒ Output Voltage ƒƒ Output Capability
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Logic 0: 0.8 V max.
Logic 1: 2.0 V min
Sink: 8.0 mA @ 0.8 V
Source: 0.4 mA @ 2.0 V
Pacer/Counter
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Channels
Resolution
Compatibility
Max. Input Frequency
Reference Clock
3
16 bits
5 V/TTL
10 MHz
Internal: 10 MHz, 1 MHz, 100 kHz, 10 kHz
External Frequency: 10 MHz max.
General
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCI V 2.2
1 x 68-pin SCSI female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 850 mA, 12 V @ 600 mA
Max.: 5 V @ 1.0 A, 12 V @ 700 mA
ƒƒ Operating Temperature 0 ~ 60°C (32 ~ 140°F)
ƒƒ Storage Temperature -20 ~ 85°C (-4 ~ 185°F)
ƒƒ Storage Humidity
5 ~ 95% RH non-condensing
Ordering Information
1 MS/s, 12-bit High-speed Multifunction PCI Card
1 MS/s, 12-bit High-speed Multi. PCI Card w/o AO
Accessories
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCLD-8712
PCL-10168-1E
PCL-10168-2E
ADAM-3968
Industrial Ethernet
Solutions
Industrial Gateway
Solutions
Serial communication
cards
Embedded Automation
PCs
DIN-Rail IPCs
Bus Type
I/O Connector
Dimensions (L x H)
Power Consumption
ƒƒ PCI-1712
ƒƒ PCI-1712L
Industrial Wireless
Solutions
DIN-rail Wiring Board for PCI-1712/L
68-pin SCSI Shielded Cable, 1 m
68-pin SCSI Shielded Cable, 2 m
68-pin DIN-rail SCSI Wiring Board
Online Download www.advantech.com/products
CompactPCI Systems
IoT Wireless I/O
Modules
IoT Ethernet I/O
Modules
RS-485 I/O Modules
Data Acquisition
Boards
18-27
PCI-1716/L
250 kS/s, 16-bit, 16-ch PCI Multifunction
DAQ Card
Features
ƒƒ 16 single-ended or 8 differential or a combination of analog inputs
ƒƒ 16-bit A/D converter, with up to 250 kHz sampling rate
ƒƒ Onboard FIFO memory (1,024 samples)
ƒƒ Auto-calibration
ƒƒ PCI-Bus mastering data transfer
ƒƒ 2 analog output channels (PCI-1716 only)
ƒƒ 16-ch digital input and 16-ch digital output
ƒƒ Onboard programmable counter
ƒƒ BoardID switch
RoHS
COMPLIANT
2002/95/EC
Specifications
Analog Input
Digital Output
ƒƒ Channels
ƒƒ Channels
ƒƒ Compatibility
ƒƒ Output Voltage
16 single-ended/ 8 differential (software
programmable)
ƒƒ Resolution
16 bits
ƒƒ Max. Sampling Rate 250 kS/s
Note: The sampling rate for each channels will be affected by used channel number.
For example, if 4 channels are used, the sampling rate is 250k/4 = 62.5 kS/s per channel.
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
FIFO Size
1,024 samples
Overvoltage Protection 30 Vp-p
Input Impedance
100 MΩ/10 pF (off), 100 MΩ/100 pF (on)
Sampling Modes
Software, onboard programmable pacer and external
Input Range (V, software programmable) & Absolute Accuracy
Unipolar
Bipolar
Absolute Accuracy (% of FSR)*
N/A
±10
0.05
0 ~ 10
±5
0.03
0~5
±2.5
0.03
0 ~ 2.5
±1.25
0.05
0 ~ 1.25
±0.625
0.1
ƒƒ Output Capability
Pacer/Counter
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Channels
Resolution
Compatibility
Max. Input Frequency
Reference Clock
* ±1 LSB is added as the derivative for absolute accuracy
Channels
Resolution
Output Rate
Output Range
Internal Reference
External Reference
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Slew Rate
Driving Capability
Output Impedance
Operation Mode
Accuracy
2
16 bits
Static update
(Software programmable)
Unipolar
Bipolar
0 ~ 5 V , 0 ~ 10 V
±5 V, ±10 V
0 ~ +x V @ +x V (-10 ≤ x ≤ 10)
-x ~ +x V @ +x V (-10 ≤ x ≤ 10)
20 V/µs
20 mA
0.1 Ω max.
Static update
INLE: ±1 LSB
Digital Input
ƒƒ Channels
ƒƒ Compatibility
ƒƒ Input Voltage
18-28
1
16 bits
5 V/TTL
1 MHz
Internal: 10 MHz
External Clock Frequency: 10 MHz max.
General
Analog Output (PCI-1716 only)
ƒƒ
ƒƒ
ƒƒ
ƒƒ
16
5 V/TTL
Logic 0: 0.4 V max.
Logic 1: 2.4 V min.
Sink: 0.8 mA @ 0.8 V
Source: 2.4 mA @ 2.0 V
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Data Acquisition Boards
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Bus Type
I/O Connector
Dimensions (L x H)
Power Consumption
PCI V2.2
1 x 68-pin SCSI female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 850 mA, 12 V @ 600 mA
Max.: 5 V @ 1 A, 12 V @ 700 mA
Operating Temperature 0 ~ 70°C (32 ~ 158°F)
Storage Temperature -20 ~ 85°C (-4 ~ 185°F)
Operating Humidity
5 ~ 85% RH non-condensing
Storage Humidity
5 ~ 95% RH non-condensing
Ordering Information
ƒƒ PCI-1716
ƒƒ PCI-1716L
250 kS/s, 16-bit High-resolution Multi. Card
250 kS/s, 16-bit High-res. Multi. Card w/o AO
Accessories
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCLD-8710
PCL-10168-1E
PCL-10168-2E
ADAM-3968
DIN-rail Wiring Board w/ CJC
68-pin SCSI Shielded Cable, 1 m
68-pin SCSI Shielded Cable, 2 m
68-pin DIN-rail SCSI Wiring Board
PCI-1741U
PCI-1742U
200 kS/s, 16-bit, 16-ch Universal PCI
Multifunction Card
1 MS/s, 16-bit, 16-ch Universal PCI
Multifunction Card
Features
ƒƒ 16-ch single-ended or 8-ch differential analog input
ƒƒ PCI-1741U: 16-bit A/D converter, with up to 200 kHz sampling rate
PCI-1742U: 16-bit A/D converter, with up to 1 MHz sampling rate
ƒƒ Onboard FIFO memory (1,024 samples)
ƒƒ Auto calibration
ƒƒ PCI-1741U: 1 x 16-bit analog output channel
PCI-1742U: 2 x 16-bit analog output channels
ƒƒ 16-ch digital input and 16-ch digital output
ƒƒ Universal PCI bus (support 3.3 V or 5 V PCI bus signal)
ƒƒ Onboard programmable counter
ƒƒ BoardID™ switch
PCI-1741U
PCI-1742U
2002/95/EC
Specifications
Analog Input
Digital Output
ƒƒ Channels
ƒƒ Compatibility
ƒƒ Output Voltage
16 single-ended/8 differential (software programmable)
16 bits
PCI-1741U: 200 kS/s
PCI-1742U: single-channel - 1 MS/s
multi-channel - 800 kS/s
unipolar bipolar mixed - 250 kS/s
FIFO Size
1,024 samples
Overvoltage Protection 30 Vp-p
Input Impedance
100 MΩ/10pF (Off); 100 MΩ/100pF (On)
Sampling Mode
Software, onboard programmable pacer and external
Input Range*
(V, software programmable)
N/A
±10
0.02
0 ~ 10
±5
0.02
0~5
±2.5
0.02
0 ~ 2.5
±1.25
0.03
0 ~ 1.25
±0.625
0.04
ƒƒ Output Capability
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Channels
Compatibility
Resolution
Max. Input Frequency
Reference Clock
PCI-1741U: 1
PCI-1742U: 2
16 bits
Static update
(V, software programmable)
Bipolar
Unipolar
External Reference
ƒƒ Slew Rate
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Driving Capability
Output Impedance
Operation Mode
Accuracy
±5, ±10
0 ~ 5, 0 ~ 10
0 ~ +xV @ +xV (-10 ≤ x ≤ 10)
-x ~ +xV @ +xV (-10 ≤ x ≤ 10)
PCI-1741U: 20 V/us
PCI-1742U: 40 V/us
±20 mA
0.1 W max.
Software polling
INLE: ±2LSB
Digital Input
ƒƒ Channels
ƒƒ Compatibility
ƒƒ Input Voltage
1
5 V/TTL
16 bits
10 MHz
Internal: 10 MHz
External Clock Frequency: 10 MHz
General
Analog Output
Internal
Reference
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Sink: 24 mA @ 0.8 V
Source: -15 mA @ 2.0 V
Counter/Timer
* Note: All channels should be set to the same range
ƒƒ Resolution
ƒƒ Output Rate
ƒƒ Output Range
Automation Software
Panel PCs
ƒƒ Channels
ƒƒ Resolution
ƒƒ Max. Sampling Rate ƒƒ Channels
Power & Energy
Automation
Automation Panels
COMPLIANT
Unipolar
Bipolar
Accuracy (% of FSR ±1LSB)
Motion Control
Intelligent Operator
Panel
RoHS
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
WebAccess+ Solutions
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Bus Type
I/O Connector Type
Dimensions (L x H)
Power Consumption
Universal PCI V2.2
1 x 68-pin SCSI female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 850 mA, 12 V @ 600 mA
Max.: 5 V @ 1 A, 12 V @ 700 m A
ƒƒ Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
ƒƒ Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
ƒƒ Storage Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Ordering Information
ƒƒ PCI-1741U
ƒƒ PCI-1742U
200 kS/s, 16-bit, 16-ch Univ. PCI Multi. Card
1 MS/s, 16-bit, 16-ch Univ. PCI Multi. Card
Accessories
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCL-10168-1
PCL-10168-2
ADAM-3968
PCLD-8710
Industrial Wireless
Solutions
Industrial Ethernet
Solutions
Industrial Gateway
Solutions
Serial communication
cards
Embedded Automation
PCs
DIN-Rail IPCs
CompactPCI Systems
IoT Wireless I/O
Modules
IoT Ethernet I/O
Modules
RS-485 I/O Modules
68-pin SCSI Shielded Cable, 1 m
68-pin SCSI Shielded Cable, 2 m
68-pin DIN-rail SCSI Wiring Board
DIN-rail Wiring Board w/ CJC
Online Download www.advantech.com/products
Data Acquisition
Boards
18-29
PCI-1714U
PCI-1714UL
30 MS/s, 12-bit, Simultaneous 4-ch
Analog Input Universal PCI Card
10 MS/s, 12-bit, Simultaneous 4-ch
Analog Input Universal PCI Card
Features
ƒƒ 4 single-ended analog input channels
ƒƒ 12-bit A/D converter, with up to 30 MHz sampling rate
ƒƒ Programmable gain
ƒƒ Onboard FIFO memory (PCI-1714U: 32,768 samples each channel;
PCI-1714UL: 8,192 samples, each channel)
ƒƒ 4 A/D converters simultaneously sampling
ƒƒ Multiple A/D triggering modes
ƒƒ Programmable pacer/counter
ƒƒ BoardID™ switch
ƒƒ Universal PCI Bus (supports 3.3 V or 5 V PCI bus signals)
PCI-1714U
PCI-1714UL
RoHS
COMPLIANT
2002/95/EC
Introduction
PCI-1714U and PCI-1714UL are advanced high-performance data acquisition cards based on the PCI bus. With a large FIFO of 32,768 for each channel, the maximum sampling rate
of PCI-1714U can get up to 30 MS/s, on each channel, with an emphasis on continuous, non-stop, high-speed, streaming data of samples to host memory. The low-cost PCI-1714UL
offers 10 MS/s on each channel at a stable rate, and has also been equipped with a universal PCI interface.
Specifications
Ordering Information
Analog Input
ƒƒ PCI-1714U ƒƒ PCI-1714UL
ƒƒ Channels
ƒƒ Resolution
ƒƒ Max. Sampling Rate
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
4 single-ended
12 bits
PCI-1741U: 30 MS/s per channel
PCI-1741UL: 10 MS/s per channel
FIFO Size
PCI-1714U: 32,768 samples each channel
PCI-1714UL: 8,192 samples each channel
Overvoltage Protection 30 Vp-p
Input Impedance
50 W/1 MW/Hi Z jumper selectable/100 pF
Sampling Modes
Software polling, pacer
Trigger Modes
Post-trigger, pre-trigger, delay-trigger, about-trigger
Input Range (V, software programmable) & Absolute Accuracy
Bipolar
Absolute Accuracy (% of FSR)*
±5
0.1
±2.5
0.2
±1
0.2
* ±1 LSB is added as the derivative for absolute accuracy
General
ƒƒ Bus Type
ƒƒ I/O Connectors
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
18-30
Universal PCI V2.2
4 x BNC connector (for AI)
1 x PS/2 connector (for Ext. clock and trigger)
Dimensions (L x H)
175 x 100 mm (6.9" x 3.9")
Power Consumption
Typical: 5 V @ 850 mA ; 12 V @ 600 mA
Max.: 5 V @ 1 A; 12 V @ 700m A
Operating Temperature 0 ~ 60°C (32 ~ 140°F)
Storage Temperature -20 ~ 85°C (-4 ~ 185°F)
Storage Humidity
5 ~ 95% RH, non-condensing
Data Acquisition Boards
±0.5
0.4
30 MS/s, 12-bit, Simultaneous 4-ch AI PCI Card
10 MS/s, 12-bit, Simultaneous 4-ch AI PCI Card
Accessories
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ADAM-3909 PCL-1010B-1E PCL-10901-1E PCL-10901-3E DB9 DIN-rail Wiring Board
BNC to BNC Wiring Cable, 1 m
DB9 to PS/2 Cable, 1 m
DB9 to PS/2 Cable, 3 m
Pin Assignments
PCI-1713U
PCI-1715U
100 kS/s, 12-bit, 32-ch Isolated Analog
Input Universal PCI Card
500 kS/s, 12-bit, 32-ch Isolated Analog
Input Universal PCI Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
WebAccess+ Solutions
ƒƒ 2,500 VDC isolation protection
ƒƒ 32-ch single-ended or 16-ch differential or a combination of analog input
ƒƒ 12-bit resolution for A/D conversion
ƒƒ Programmable gain for each input channel
ƒƒ Onboard FIFO memory (PCI-1713U: 4,096 samples; PCI-1715U: 1,024
samples)
ƒƒ Software, internal or external pacer sampling modes supported
ƒƒ Universal PCI bus
Motion Control
Power & Energy
Automation
Automation Software
ƒƒ BoardID™ switch
Intelligent Operator
Panel
PCI-1713U
PCI-1715U
Automation Panels
RoHS
COMPLIANT
2002/95/EC
Specifications
Ordering Information
Analog Input
ƒƒ PCI-1713U
ƒƒ PCI-1715U
ƒƒ Channels
32 single-ended/16 differential
(software programmable)
ƒƒ Resolution
12 bits
ƒƒ Max. Sampling Rate PCI-1713U: 100 kS/s
PCI-1715U: 500 kS/s
Note: The sampling rate for each channels will be affected by used channel number.
For example, if 4 channels of PCI-1713U are used, the sampling rate is 100k/4 = 25
kS/s per channel.
ƒƒ FIFO Size
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCI-1713U: 4,096 samples
PCI-1715U: 1,024 samples
Overvoltage Protection 30 Vp-p
Isolation Protection
2,500 VDC
Input Impedance
1 GW
Sampling Modes
Software, onboard programmable pacer and external
clock (TTL level)
Input Range (V, software programmable) & Absolute Accuracy
Unipolar
Bipolar
Absolute Accuracy (% of FSR)*
N/A
±10
0.1
0 ~10
±5
0.1
0~5
±2.5
0.2
0 ~ 2.5
±1.25
0.2
100 kS/s, 12-bit, 32-ch Isolated AI PCI Card
500 kS/s, 12-bit, 32-ch Isolated AI PCI Card
Industrial Wireless
Solutions
Accessories
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ADAM-3937
PCL-10137-1E
PCL-10137-2E
PCL-10137-3E
Panel PCs
DB37 DIN-rail Wiring Board
DB37 Cable, 1 m
DB37 Cable, 2 m
DB37 Cable, 3 m
Pin Assignments
0 ~ 1.25
±0.625
0.4
* ±1 LSB is added as the derivative for absolute accuracy
Industrial Ethernet
Solutions
Industrial Gateway
Solutions
Serial communication
cards
Embedded Automation
PCs
DIN-Rail IPCs
CompactPCI Systems
General
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Bus Type
I/O Connector
Dimensions (L x H)
Power Consumption
Universal PCI V2.2
1 x DB37 female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 850 mA
Max.: 5 V @ 1.0 A
ƒƒ Operating Temperature 0 ~ 60°C (32 ~ 140°F)
ƒƒ Storage Temperature -20 ~ 70°C (-4 ~ 158°F)
ƒƒ Storage Humidity
5 ~ 95% RH non-condensing
IoT Wireless I/O
Modules
IoT Ethernet I/O
Modules
RS-485 I/O Modules
Data Acquisition
Boards
Online Download www.advantech.com/products
18-31
PCI-1747U
250 kS/s, 16-bit, 64-ch Analog Input
Universal PCI Card
Features
ƒƒ 64-ch single-ended or 32-ch differential or a combination of analog input
ƒƒ 16-bit A/D converter, with up to 250 kHz sampling rate
ƒƒ Auto calibration
ƒƒ Onboard FIFO memory (1,024 samples)
ƒƒ PCI-Bus mastering data transfer
ƒƒ Universal PCI Bus (support 3.3 V or 5 V PCI bus signal)
ƒƒ BoardID™ switch
RoHS
COMPLIANT
2002/95/EC
Introduction
PCI-1747U is a high-resolution, high-channel-count analog input card for the PCI bus. Its sampling rate is up to 250 kS/s and 16-bit resolution provides the resolution needed for
most data acquisition applications. PCI-1747U provides 64 single-ended, 32 differential analog input channels or a combination of these. It also has built in a 1,024 FIFO buffer for
analog input data.
Specifications
Ordering Information
ƒƒ PCI-1747U
Analog Input
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Channels
Resolution
Max. Sampling Rate FIFO Size
Overvoltage Protection
Input Impedance
Sampling Modes
Input Range
Unipolar
Bipolar
Accuracy (% of FSR ±1LSB)
64 single-ended, 32 differential, or combination
16 bits
250 kS/s
1,024 samples
30 Vp-p
100 MW/10 pF (Off); 100 MW/100 pF (On)
Software and onboard programmable pacer
(V, software programmable)
N/A
±10
0.03
0 ~ 10
±5
0.02
0~5
±2.5
0.02
0 ~ 2.5
±1.25
0.03
0 ~ 1.25
±0.625
0.04
General
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Bus Type
I/O Connector
Dimensions (L x H)
Power Consumption
Universal PCI V2.2
1 x 68-pin SCSI female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 850 mA, 12 V @ 600 mA
Max.: 5 V @ 1 A, 12 V @ 700 m A
ƒƒ Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
ƒƒ Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
ƒƒ Storage Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
18-32
Data Acquisition Boards
250 kS/s, 16-bit, 64-ch AI Universal PCI Card
Accessories
ƒƒ ADAM-3968
ƒƒ PCL-10168-1
ƒƒ PCL-10168-2
68-pin DIN-rail SCSI Wiring Board
68-pin SCSI Shielded Cable, 1 m
68-pin SCSI Shielded Cable, 2 m
Pin Assignments
PCI-1720U
PCI-1724U
12-bit, 4-ch Isolated Analog Output
Universal PCI Card
14-bit, 32-ch Isolated Analog Output
Universal PCI Card
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
WebAccess+ Solutions
Motion Control
Power & Energy
Automation
Automation Software
Intelligent Operator
Panel
PCI-1720U
PCI-1724U
RoHS
COMPLIANT
RoHS
COMPLIANT
2002/95/EC
Specifications
Specifications
Analog Output
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Channels
Resolution Output Rate Output Range Bipolar (V)
Unipolar (V)
Current Loop (mA)
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Slew Rate Isolation Protection Driving Capability Operation Modes Accuracy ƒƒ Excitation Voltage ±5, ±10
0 ~ 5, 0 ~ 10
0 ~ 20, 4 ~ 20 (software programmable)
2 V/μs
2,500 VDC
5 mA
Software polling
Relative: ±1 LSB; Differential
Non-Linearity: ±1 LSB (monotonic)
50 V (max.)
Bus Type I/O Connectors Dimensions (L x H) Power Consumption
Universal PCI V2.2
1 x DB37 female connector
175 x 100 mm (6.9" x 3.9")
5 V @ 350 mA (typical), 500 mA (max.)
12 V @ 200 mA (typical), 350 mA (max.)
ƒƒ Operating Temperature 0 ~ 60°C (32 ~ 140°F)
ƒƒ Storage Temperature -20 ~ 70°C (-4 ~ 158°F)
ƒƒ Storage Humidity 5 ~ 95% RH, non-condensing
Ordering Information
ƒƒ PCI-1720U 12-bit, 4-ch Isolated AO Universal PCI Card
Accessories
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCL-10137-1E PCL-10137-2E PCL-10137-3E ADAM-3937 ƒƒ
ƒƒ
ƒƒ
ƒƒ
Channels Resolution Output Rate Output Range
Bipolar (V)
Current Loop (mA)
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Isolation Protection Output Impedance Operation Modes Accuracy ƒƒ Driving Capacity 32 isolated
14 bits
Static update
±10
0 ~ 20, 4 ~ 20 (software programmable)
1,500 VDC system isolation
0.1 W max.
Software polling, synchronized output
Relative: ±4 LSB
Differential Non-linearity: ±2 LSB (monotonic)
10 mA
General
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Automation Panels
Panel PCs
Analog Output
4 isolated
12 bits
Static update
General
ƒƒ
ƒƒ
ƒƒ
ƒƒ
2002/95/EC
Bus Type Universal PCI V2.2
I/O Connectors 1 x DB62 female connector
Dimensions (L x H) 175 x 100 mm (6.9" x 3.9")
Power Consumption 5 V @ 400 mA, 12 V @ 270 mA max.
Operating Temperature 0 ~ 60°C (32 ~ 140°F)
Storage Temperature -20 ~ 70°C (-4 ~ 158°F)
Storage Humidity 5 ~ 95 % RH, non-condensing
Industrial Wireless
Solutions
Industrial Ethernet
Solutions
Industrial Gateway
Solutions
Serial communication
cards
Embedded Automation
PCs
DIN-Rail IPCs
CompactPCI Systems
Ordering Information
ƒƒ PCI-1724U 14-bit, 32-ch Isolated AO Universal PCI Card
Accessories
ƒƒ PCL-10162-1E ƒƒ PCL-10162-3E ƒƒ ADAM-3962 DB62 Cable, 1 m
DB62 Cable, 3 m
DB62 DIN-rail Wiring Board
IoT Wireless I/O
Modules
IoT Ethernet I/O
Modules
RS-485 I/O Modules
DB37 Cable, 1 m
DB37 Cable, 2 m
DB37 Cable, 3 m
DB37 DIN-rail Wiring Board
Data Acquisition
Boards
Online Download www.advantech.com/products
18-33
PCI-1721
12-bit, 4-ch Analog Output PCI Card
with 16-ch Digital I/O
Features
ƒƒ 10 MHz maximum digital update rate
ƒƒ Auto calibration function
ƒƒ Four analog output channels with 1,024 samples FIFO buffer
ƒƒ A 12-bit DAC is equipped for each of analog output channels
ƒƒ Real-time waveform output function with internal/external pacer
ƒƒ Synchronized output function
ƒƒ Flexible output types and range settings
ƒƒ Keeps the output settings and values after system hot reset
ƒƒ 16-ch DI/O and one 10 MHz 16-bit resolution counter
ƒƒ BoardID™ switch
RoHS
COMPLIANT
2002/95/EC
Introduction
PCI-1721 is an advanced high-speed analog output card for the PCI bus, and each of analog output channels are equipped with a 12-bit, double-buffered DAC. It features many
powerful and unique functions, like a waveform output function with 10 MHz maximum update rate, auto-calibration and a BoardID switch. PCI-1721 is an ideal solution for industrial
applications where high-speed continuous analog output or real-time waveform output functions are required.
Specifications
Analog Output
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Channels
Resolution
FIFO Size
Output Rate
Reference Clock
Counter/Timer
4
12 bits
1,024 samples
10 MHz or static update
Internal: 10 MHz
External Clock Frequency: 10 MHz max.
External Voltage Range: 0.8 V max., 2 V min.
ƒƒ Output Range
Internal Reference
Unipolar
Bipolar
Current Loop
External Reference
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Slew Rate
Driving Capability Output Impedance Operation Modes
Accuracy
0 ~ 5 V, 0 ~ 10 V,
±5 V, ±10 V
0 ~ 20 mA, 4 ~ 20 mA
(software programmable)
0 ~ +x V @ +x V (-10 ≤ x ≤ 10)
-x ~ +x V @ +x V (-10 ≤ x ≤ 10)
10 V/µs
10 mA
0.1 W max.
Single/continuous/waveform/synchronized output
Relative: ±1 LSB
Differential Non-linearity: ±1 LSB (monotonic)
Digital Input/Output
ƒƒ Channels
ƒƒ Compatibility
ƒƒ Input Voltage
ƒƒ Output Capability
18-34
16 (shared by input/output)
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Sink: 0.5 V @ 24 mA
Source: 2.0 V @ -15 mA
Data Acquisition Boards
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Channels
Resolution
Compatibility
Max. Input Frequency
Reference Clock
1
16 bits
5 V/TTL
10 MHz
Internal: 10 MHz
External Clock Frequency: 10 MHz max.
External Voltage Range: 0.8 V max, 2.0 V min.
General
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
PCI V2.2
1 x 68-pin SCSI female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 850 mA, 12 V @ 600 mA
Max.: 5 V @ 1 A, 12 V @ 700 mA
ƒƒ Operating Temperature 0 ~ 60°C (32 ~ 140°F)
ƒƒ Storage Temperature -20 ~ 85°C (-4 ~ 185°F)
ƒƒ Storage Humidity
5 ~ 95% RH, non-condensing
Ordering Information
ƒƒ PCI-1721
12-bit, 4-ch Advanced PCI Analog Output Card
Accessories
ƒƒ PCL-10168-1E
ƒƒ PCL-10168-2E
ƒƒ ADAM-3968
68-pin SCSI Shielded Cable, 1 m
68-pin SCSI Shielded Cable, 2 m
68-pin DIN-rail SCSI Wiring Board
PCI-1723
PCI-1727U
16-bit, 8-ch Analog Output PCI Card with
16-ch Digital I/O
14-bit, 12-ch Analog Output Universal
PCI Card with 32-ch Digital I/O
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
WebAccess+ Solutions
Motion Control
Power & Energy
Automation
Automation Software
Intelligent Operator
Panel
PCI-1723
PCI-1727U
RoHS
COMPLIANT
RoHS
COMPLIANT
2002/95/EC
2002/95/EC
Specifications
Specifications
Analog Output
Analog Output
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Channels Resolution Output Rate Output Range Bipolar (V)
Current Loop (mA)
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Driving Capability Output Impedance Operation Modes Accuracy ƒƒ
ƒƒ
ƒƒ
ƒƒ
8
16 bits
Static update
Channels Resolution Output Rate Output Range ƒƒ
ƒƒ
ƒƒ
ƒƒ
5 mA
0.1 W max.
Software polling, synchronized output
Relative: ±6 LSB
Differential Non-linearity: ±6 LSB (monotonic)
16 (shared by input/output)
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
ƒƒ Output Capability Sink Sink: 0.5 V @ 24 mA
Source: 2.0 V @ 15 mA
ƒƒ Input Loading Digital Output
General
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ Bus Type ƒƒ I/O Connectors Bus Type I/O Connectors Dimensions (L x H) Power Consumption PCI V2.2
1 x 68-pin SCSI female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 850 mA, 12 V @ 600 mA
Max.: 5 V @ 1 A, 12 V @ 700 mA
ƒƒ Operating Temperature 0 ~ 60°C (32 ~ 158°F)
ƒƒ Storage Temperature -20 ~ 85°C (-4 ~ 185°F)
ƒƒ Storage Humidity 5 ~ 95% RH non-condensing
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
16-bit, 8-ch Non-isolated Analog Output PCI Card
Channels Compatibility Output Voltage Output Capability 16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
0.5 V @ 0.4 mA max. (low)
2.7 V @ 50 μA max. (high)
16
5 V/TTL
Logic 0: 0.5 V, Logic 1: 2.4 V
Sink: 0.5 V @ 8 mA
Source: 2.4 V @ 0.4 mA
Universal PCI V2.2
1 x 37-pin D-type female connector
2 x 20-pin box header
Power Consumption 5 V @ 460 mA typical, 500 mA max
12 V @ 150 mA typical,100 mA max
Dimensions (L x H) 175 × 100 mm (6.9" ×3.9")
Operating Temperature 0 ~ 50°C (32 ~ 122°F)
Storing Temperature -20 ~ 65°C (-4 ~ 149°F)
Storing Humidity 5 ~ 95% RH, non-condensing
Ordering Information
ƒƒ PCI-1727U 68-pin SCSI Shielded Cable, 1 m
68-pin SCSI Shielded Cable, 2 m
68-pin DIN-rail SCSI Wiring Board
±5
0 ~ 5, 0 ~ 10
0 ~ 20
General
Ordering Information
ƒƒ PCL-10168-1E ƒƒ PCL-10168-2E ƒƒ ADAM-3968 Industrial Wireless
Solutions
Digital Input
Digital Input/Output
Accessories
12
14 bits
Static update
Slew Rate 0.7 V/μs
Driving Capability 15 mA
Operation Modes Software polling, synchronized output
Current Loop Excitation 8 ~ 36 V
ƒƒ Channels ƒƒ Compatibility ƒƒ Input Voltage ƒƒ Channels ƒƒ Compatibility ƒƒ Input Voltage ƒƒ PCI-1723 Panel PCs
Bipolar (V)
Unipolar (V)
Current Loop (mA)
±10
0 ~ 20, 4 ~ 20 (software programmable)
14-bit, 12-ch Universal Analog Output Card
Accessories
ƒƒ PCL-10120-1E ƒƒ PCL-10137-1E ƒƒ ADAM-3937 Automation Panels
Industrial Ethernet
Solutions
Industrial Gateway
Solutions
Serial communication
cards
Embedded Automation
PCs
DIN-Rail IPCs
CompactPCI Systems
IoT Wireless I/O
Modules
IoT Ethernet I/O
Modules
RS-485 I/O Modules
Data Acquisition
Boards
20-pin flat cable, 1 m
DB37 cable assembly, 1 m
DB37 wiring terminal for DIN-rail mounting
Online Download www.advantech.com/products
18-35
PCI-1735U
PCI-1737U
PCI-1739U
64-ch Digital I/O and Counter Universal PCI
Card
24-ch Digital I/O Universal PCI Card
48-ch Digital I/O Universal PCI Card
Features
ƒƒ ISA-Compatible with PCL-720+ (PCI-1735U), PCL-724 (PCI-1737U) and
PCL-731 (PCI-1739U)
ƒƒ TTL-level digital input and output compatibility
ƒƒ Emulates mode 0 of 8255 PPI (PCI-1737U and PCI-1739U)
ƒƒ Interrupt handling capability (PCI-1737U and PCI-1739U)
ƒƒ Output status readback (PCI-1737U and PCI-1739U)
ƒƒ 3 programmable counter/timer channels and User configurable clock source
(PCI-1735U)
ƒƒ Breadboard area for custom circuits (PCI-1735U and PCI-1739U)
ƒƒ PCI universal card
PCI-1735U
PCI-1737U
PCI-1739U
RoHS
COMPLIANT
2002/95/EC
Specifications
Digital Input
ƒƒ Prog.Counter Modes ƒƒ Channels
PCI-1735U: 32
PCI-1737U: 24 (shared with output)
PCI-1739U: 48 (shared with output)
ƒƒ Compatibility
5 V/TTL
ƒƒ Input Voltage
PCI-1735:
Logic 0: 0.8V max.
Logic 1: 2.0V min.
PCI-1737U/1739U:Logic 0: 0.4V max.
Logic 1: 2.4V min.
ƒƒ Interrupt Capable Ch. PCI-1737U: 1
PCI-1739U: 2
Digital Output
ƒƒ Channels
PCI-1735U: 32
PCI-1737U: 24 (shared with input)
PCI-1739U: 48 (shared with input)
5 V/TTL
PCI-1735U: Logic 0: 0.5 V max.
Logic 1: 2.4 V min.
PCI-1737U/1739U: Logic 0: 0.4 V max.
Logic 1: 2.4 V min.
PCI-1735U: Sink: 0.5 V @ 24 mA
Source: 2.4 V @ 15 mA
PCI-1737U/1739U:Sink: 0.4 V @ 24 mA
Source: 2.4 V @ 15 mA
ƒƒ Compatibility
ƒƒ Output Voltage
ƒƒ Output Capability
Counter/Timer (PCI-1735U)
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
18-36
Channels Resolution Compatibility Max. Input Frequency Re. Clock Internal
Ext. Clock Frequency
3
16 bits
5 V/TTL
1 MHz
Selectable 1 MHz, 100 kHz, or 10 kHz base clock
Jumper selectable divider: x2, x1, x0.5, and x0.25
Data Acquisition Boards
6
General
ƒƒ Bus Type
ƒƒ I/O Connectors
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Universal PCI V2.2
PCI-1735U: 5 x 20-pin box header
PCI-1737U: 2 x 20-pin & 1 x 50-pin box header
PCI-1739U: 2 x 50-pin box header
Dimensions (L x H)
175 x 100 mm (6.9" x 3.9")
Power Consumption
PCI-1735U: 5V @365 mA (max.)
PCI-1737U: 5V @300 mA (max.)
PCI-1739U: 5V @720 mA (max.)
Operating Temperature 0 ~ 65°C (32 ~ 149°F)
Storage Temperature -25 ~ 80°C (-13 ~ 176°F)
Storage Humidity
5 ~ 95% RH, non-condensing
Ordering Information
ƒƒ PCI-1735U ƒƒ PCI-1737U ƒƒ PCI-1739U 64-ch Digital I/O and Counter Card
24-ch Digital I/O Universal PCI Card
48-ch Digital I/O Universal PCI Card
Accessories
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCL-10120-1E PCL-10120-2E PCL-10150-1.2E ADAM-3920 ADAM-3950 IDC-20 Flat Cable, 1 m
IDC-20 Flat Cable, 2 m
50-pin Flat Cable, 1.2 m
20-Pin Flat Cable Terminal, DIN-rail Mount
50-pin DIN-rail Flat Cable Wiring Board
PCI-1751
48-ch Digital I/O and 3-ch Counter PCI
Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
WebAccess+ Solutions
ƒƒ 48 TTL digital I/O lines
ƒƒ Emulates mode 0 of 8255 PPI
ƒƒ Buffered circuits for higher driving capacity than the 8255
ƒƒ Interrupt handling capability
ƒƒ Timer/Counter interrupt capability
ƒƒ Supports both dry and wet contact
ƒƒ Keeps the I/O port setting and DO state after system reset
ƒƒ BoardID switch
Motion Control
Power & Energy
Automation
Automation Software
Intelligent Operator
Panel
Automation Panels
RoHS
COMPLIANT
2002/95/EC
Introduction
Panel PCs
PCI-1751 is a 48-bit digital I/O card for the PCI bus. Its 48 bits are divided into six 8-bit I/O ports and users can configure each port as input or output via software. PCI-1751 also
provides one event counter and two 16-bit timers, which can be cascaded to become a 32-bit timer.
Specifications
Ordering Information
ƒƒ PCI-1751
Digital Input
ƒƒ Channels
ƒƒ Compatibility
ƒƒ Input Voltage
48 (shared with output)
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2 V min.
ƒƒ Interrupt Capable Ch. 2
Digital Output
ƒƒ Channels
ƒƒ Compatibility
ƒƒ Output Voltage
ƒƒ Output Capability
48 (shared with input)
5 V/TTL
Logic 0: 0.4 V max.
Logic 1: 2.4 V min.
Sink: 0.4 V @ 24 mA
Source: 2.4 V @ 15 mA
48-ch Digital I/O and Counter PCI Card
Industrial Ethernet
Solutions
Accessories
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCL-10168-1E
PCL-10168-2E
ADAM-3968
ADAM-3968/20
ADAM-3968/50
PCLD-8751
PCLD-8761
PCLD-8762
68-pin SCSI Shielded Cable, 1 m
68-pin SCSI Shielded Cable, 2 m
68-pin DIN-rail SCSI Wiring Board
68-pin SCSI to 3 20-pin Box Header Board
68-pin SCSI to 2 50-pin Box Header Board
48-ch Isolated Digital Input Board
24-ch Replay/ Isolated Digital Input Board
48-ch Relay Board
Pin Assignments
Industrial Gateway
Solutions
Serial communication
cards
Embedded Automation
PCs
DIN-Rail IPCs
Counter/Timer
ƒƒ Channels
ƒƒ Resolution
3
2 x 16-bit counters, or 1 x 32-bit counter
(jumper selectable)
1 x 16-bit event counter
ƒƒ Compatibility
5 V/TTL
ƒƒ Max. Input Frequency 10 MHz
ƒƒ Reference Clock
Internal: 10 MHz
External Clock Frequency: 10 MHz
External Voltage Range: 5 V/TTL
CompactPCI Systems
IoT Wireless I/O
Modules
IoT Ethernet I/O
Modules
General
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Industrial Wireless
Solutions
RS-485 I/O Modules
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
Universal PCI V2.2
1 x 68-pin SCSI female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 850 mA
Max.: 5 V @ 1.0 A
ƒƒ Operating Temperature 0 ~ 70°C (32 ~ 158°F)
ƒƒ Storage Temperature -20 ~ 80°C (-4 ~ 176°F)
ƒƒ Storage Humidity
5 ~ 95% RH, non-condensing
Data Acquisition
Boards
Online Download www.advantech.com/products
18-37
PCI-1753
PCI-1753E
96-ch Digital I/O PCI Card
96-ch Digital I/O Extension Card for
PCI-1753
Features
ƒƒ Up to 96 TTL digital I/O lines
ƒƒ Emulates mode 0 of 8255 PPI
ƒƒ Buffered circuits for higher driving capacity than the 8255
ƒƒ Multiple-source interrupt handling capability
ƒƒ Interrupt output pin for simultaneously triggering external devices with the
interrupt
ƒƒ Output status read-back
ƒƒ “Pattern match” and “Change of state” interrupt functions for critical I/O
monitoring
ƒƒ Keeps the output settings and values after system hot reset
ƒƒ Supports both dry and wet contact
ƒƒ High-density 100-pin SCSI connector
PCI-1753E
PCI-1753
RoHS
COMPLIANT
2002/95/EC
Introduction
PCI-1753 is a 96-bit digital I/O card for the PCI bus, which can be extended to 192 digital I/O channels by connecting its extension board - PCI-1753E. The card emulates mode 0
of the 8255 PPI chip, but the buffered circuits offer a higher driving capability than the 8255. The 96 I/O lines are divided into twelve 8-bit I/O ports: A0, B0, C0, A1, B1, C1, A2, B2,
C2, A3, B3 and C3. You can configure each port as input or output via software.
Specifications
Pin Assignments
Digital Input/Output
ƒƒ Channels
ƒƒ Programming Mode
ƒƒ Compatibility
ƒƒ Input Voltage
ƒƒ Output Voltage
ƒƒ Output Capability
96 digital I/O lines for PCI-1753
192 digital I/O lines if extending with PCI-1753E
8255 PPI mode 0
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Logic 0: 0.44 V max.
Logic 1: 3.76 V min.
Sink: 0.44 V @ 24 mA
Source: 3.76 V @ 24 mA
General
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Bus Type
I/O Connector
Dimensions (L x H)
Power Consumption
PCI V2.2
1 x 100-pin SCSI female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 400 mA
Max.: 5 V @ 2.7 A
ƒƒ Operating Temperature 0 ~ 60°C (32 ~ 140°F)
ƒƒ Storage Temperature -20 ~ 70°C (-4 ~ 158°F)
ƒƒ Storage Humidity
5 ~ 95% RH, non-condensing
Ordering Information
ƒƒ PCI-1753
ƒƒ PCI-1753E
96-ch Digital I/O PCI Card
Extension Board for PCI-1753
Accessories
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
18-38
ADAM-3968
ADAM-3968/20
ADAM-3968/50
PCLD-8751
PCLD-8761
PCLD-8762
PCL-10268-2E
68-pin DIN-rail SCSI Wiring Board
68-pin SCSI to 3 20-pin Box Header Board
68-pin SCSI to 2 50-pin Box Header Board
48-ch Isolated Digital Input Board
24-ch Replay/ Isolated Digital Input Board
48-ch Relay Board
100-pin to Two 68-pin SCSI Cables, 1 m and 2 m
Data Acquisition Boards
PCI-1755
80 MB/s, 32-ch Digital I/O PCI Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
WebAccess+ Solutions
ƒƒ Bus-mastering DMA data transfer with scatter gather technology
ƒƒ 32/16/8-bit pattern I/O with start and stop trigger function, 2 modes
handshaking I/O Interrupt handling capability
ƒƒ Onboard active terminators for high speed and long distance transfer
ƒƒ Pattern match and change state detection interrupt function
ƒƒ General-purpose 8-ch digital I/O
Motion Control
Power & Energy
Automation
Automation Software
Intelligent Operator
Panel
Automation Panels
Introduction
Panel PCs
The PCI-1755 supports PCI-bus mastering DMA for high-speed data transfer. By setting aside a block of memory in the PC, the PCI-1755 performs bus-mastering data transfers
without CPU intervention, setting the CPU free to perform other more urgent tasks such as data analysis and graphic manipulation. The function allows users to run all I/O functions
simultaneously at full speed without losing data.
Specifications
Digital Input
ƒƒ Channels
General: 8 (shared with output)
High speed: 32 (shared with output)
ƒƒ Compatibility 5V/TTL
ƒƒ Input Voltage Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
ƒƒ Interrupt Capable Ch. DIO0~DIO7
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ Compatibility ƒƒ Output Voltage ƒƒ Output Capacity Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
PCI V2.2
1 x 100-pin SCSI female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 1 A
Max.: 5 V @ 1 A
ƒƒ Operating Temperature 0 ~ 60°C (32 ~ 140°F)
ƒƒ Storage Temperature -20 ~ 85°C (-4 ~ 185°F)
ƒƒ Storage Humidity
5 ~ 95% RH, non-condensing
Digital Output
ƒƒ Channels
Industrial Ethernet
Solutions
General
General: 8 (shared with input)
High speed: 32 (shared with input)
5V/TTL
Logic 0: 0.5 V max.
Logic 1: 2.7 V min.
Sink: 0.5 V @ 48 mA
Source: 2.4 V @ 15 mA
Ordering Information
ƒƒ PCI-1755 Transfer Characteristics
Industrial Gateway
Solutions
Serial communication
cards
Embedded Automation
PCs
80 MB/s, 32-ch Digital I/O PCI Card
DIN-Rail IPCs
100-pin DIN-rail SCSI Wiring Board
100-pin SCSI High-Speed Cable, 1 m
CompactPCI Systems
Accessories
ƒƒ ADAM-39100
ƒƒ PCL-101100-1E
Industrial Wireless
Solutions
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Onboard FIFO
16 KB for DI & 16 KB DO channels
Data Transfer Mode
Bus Mastering DMA with Scatter-Gather
Data Transfer Bus Width8/16/32 bits (programmable)
Max. Transfer Rate
DI: 80 M bytes/sec, 32-bit @ 20 MHz
120 M bytes/sec, 32-bit @ 40 MHz
external pacer when data length is less than FIFO size
DO: 80 MBytes/sec, 32-bit @ 20 MHz
ƒƒ Operation Mode
Handshaking
IoT Wireless I/O
Modules
IoT Ethernet I/O
Modules
RS-485 I/O Modules
Data Acquisition
Boards
Online Download www.advantech.com/products
18-39
PCI-1730U
PCI-1733
PCI-1734
32-ch Isolated Digital I/O Universal PCI
Card
32-ch Isolated Digital Input PCI Card
32-ch Isolated Digital Output PCI Card
Features
ƒƒ ISA-compatible with PCL-730/733/734
ƒƒ 32-ch isolated DI/O (16-ch digital input, 16-ch digital output)
ƒƒ 32-ch TTL DI/O (16-ch digital input,16-ch digital output) (PCI-1730U only)
ƒƒ High output driving capacity
ƒƒ Interrupt handling capability
ƒƒ 2 x 20-pin connectors for isolated DI/O channels (PCI-1730U only)
ƒƒ 2 x 20-pin connectors for TTL DI/O channels (PCI-1730U only)
ƒƒ D-type connector for isolated input and output channels
ƒƒ High-voltage isolation on output channels
PCI-1730U
PCI-1733
PCI-1734
RoHS
COMPLIANT
2002/95/EC
Introduction
PCI-1730U, PCI-1733, and PCI-1734 offer isolated digital input channels as well as isolated digital output channels with isolation protection up to 2,500 VDC, which makes them ideal
for industrial applications where high-voltage isolation is required. There are also 32 TTL digital I/O channels on PCI-1730U.
Specifications
Digital Input (PCI-1730U only)
ƒƒ Channels
ƒƒ Compatibility
ƒƒ Input Voltage
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
ƒƒ Interrupt Capable Ch. 2 (DI0, DI1)
Isolated Digital Input (PCI-1730U/ PCI-1733)
ƒƒ Channels
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCI-1730U: 16
PCI-1733: 32
Input Voltage
Logic 0: 1 V max. (2 V max.)
Logic 1: 5V min. (30 V max.)
Interrupt Capable Ch. PCI-1730U: 2 (IDI0, IDI1)
PCI-1733: 4 (IDI0, IDI1, IDI16, IDI17)
Isolation Protection
2,500 VDC
Opto-Isolator Response25 μs
Input Resistance
2.7 kW @ 1 W
Digital Output (PCI-1730U only)
ƒƒ Channels
ƒƒ Compatibility
ƒƒ Output Voltage
ƒƒ Output Capability
16
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Sink: 0.8 V @ 24 mA
Source: 2.0 V @ 15 mA
Isolated Digital Output (PCI-1730U/ PCI-1734)
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
18-40
Channels
Output Type
Isolation Protection
Output Voltage
Sink Current
16
Sink type (NPN)
2,500 VDC
5 ~ 40 VDC
PCI-1730U: 300 mA max./channel
PCI-1734: 200 mA max./channel
Data Acquisition Boards
ƒƒ Opto-Isolator Response25 µs
General
ƒƒ Bus Type
ƒƒ I/O Connectors
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCI V2.2 (Universal PCI V2.2 for PCI-1730U)
1 x DB37 female connector
4 x 20-pin box header (PCI-1730U only)
Dimensions (L x H)
175 x 100 mm (6.9" x 3.9")
Power Consumption
Typical: 5 V @ 250 mA, 12 V @ 35 mA
Max.: 5 V @ 400 mA, 12 V @ 60 mA
Operating Temperature 0 ~ 60°C (32 ~ 140°F)
Storage Temperature -25 ~ 85°C (-13 ~ 185°F)
Storage Humidity
5 ~ 95% RH, non-condensing
Ordering Information
ƒƒ PCI-1730U
ƒƒ PCI-1733
ƒƒ PCI-1734
32-ch Isolated Digital I/O Univ. PCI Card
32-ch Isolated Digital Input PCI Card
32-ch Isolated Digital Output PCI Card
Accessories
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCL-10120-1E
PCL-10120-2E
ADAM-3920
PCLD-782
PCLD-885
PCLD-785
ADAM-3937
PCL-10137-1E
PCL-10137-2E
PCL-10137-3E
20-pin Flat Cable, 1 m
20-pin Flat Cable, 2 m
20-pin DIN-rail Flat Cable Wiring Board
16-ch Isolated DI Board w/ 1m 20-pin Flat Cable
16-ch Power Relay Board w/ 20p & 50p Flat Cables
16-ch Relay Board w/ One 1m 20-pin Flat Cable
DB37 DIN-rail Wiring Board
DB37 Cable, 1 m
DB37 Cable, 2 m
DB37 Cable, 3 m
PCI-1750
32-ch Isolated Digital I/O and 1-ch
Counter PCI Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
WebAccess+ Solutions
ƒƒ 16 isolated DI and 16 isolated DO channels
ƒƒ High voltage isolation on all isolated channels (2,500 VDC)
ƒƒ High sink current on isolated output channels (200 mA/channel)
ƒƒ Supports dry contact or 5 ~ 50 VDC isolated inputs
ƒƒ Interrupt handling capability
ƒƒ Timer/counter interrupt capability
Motion Control
Power & Energy
Automation
Automation Software
Intelligent Operator
Panel
Automation Panels
RoHS
COMPLIANT
2002/95/EC
Introduction
Panel PCs
PCI-1750 offers 16 isolated digital input channels, 16 isolated digital output channels, and one isolated counter/timer for the PCI bus. With isolation protection of 2,500 VDC, and dry
contact support, PCI-1750 is ideal for industrial applications where high-voltage protection is required. Each I/O channel of the PCI-1750 corresponds to a bit in a PC I/O port. This makes
PCI-1750 very easy to program. This card also offers a counter or timer interrupt and two digital input interrupt lines to a PC, so you can then easily configure the card with software.
Specifications
Isolated Digital Input
ƒƒ Channels
ƒƒ Input Voltage
16
Logic 0: 2 V max.
Logic 1: 5 V min. (30 VDC max.) or dry contact
ƒƒ Interrupt Capable Ch. 2
ƒƒ Isolation Protection
2,500 VDC
ƒƒ Opto-Isolator Response100 μs
Isolated Digital Output
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Channels
16
Output Type
Sink (NPN)
Isolation Protection
2,500 VDC
Output Voltage
5 ~ 40 VDC
Sink Current
200 mA max. per channel
Opto-Isolator Response100 μs
Counter/Timer
ƒƒ Channels
ƒƒ Resolution
ƒƒ Input Voltage 1
1 x 16-bit isolated counter
Logic 0: 2V max.
Logic 1: 5V min. (30VDC max.)
ƒƒ Max. Input Frequency 1 MHz
ƒƒ Isolation Protection
2,500 VDC
General
ƒƒ Bus Type
ƒƒ I/O Connectors
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCI V2.2
1 x DB37 female connector
1 x 2-pin terminal block for extended ground
Dimensions (L x H)
175 x 100 mm (6.9" x 3.9")
Power Consumption
Typical: 5 V @ 850 mA
Max.: 5 V @ 1.0 A
Operating Temperature 0 ~ 70°C (32 ~ 158°F)
Storage Temperature -20 ~ 80°C (-4 ~ 176°F)
Storage Humidity
5 ~ 95% RH, non-condensing
Ordering Information
ƒƒ PCI-1750
32-ch Isolated Digital I/O and Counter PCI Card
PCL-10137-1E
PCL-10137-2E
PCL-10137-3E
ADAM-3937
Industrial Ethernet
Solutions
Industrial Gateway
Solutions
Serial communication
cards
Embedded Automation
PCs
DIN-Rail IPCs
Accessories
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Industrial Wireless
Solutions
DB37 Cable, 1 m
DB37 Cable, 2 m
DB37 Cable, 3 m
DB37 DIN-rail Wiring Board
Pin Assignments
CompactPCI Systems
IoT Wireless I/O
Modules
IoT Ethernet I/O
Modules
RS-485 I/O Modules
Data Acquisition
Boards
Online Download www.advantech.com/products
18-41
PCI-1752U
PCI-1754
PCI-1756
64-ch Isolated Digital Output Universal PCI
Card
64-ch Isolated Digital Input PCI Card
64-ch Isolated Digital I/O PCI Card
RoHS
PCI-1752U
RoHS
PCI-1754
COMPLIANT
2002/95/EC
2002/95/EC
Features
Features
Features
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
64 isolated digital output channels
High-voltage isolation on output channels (2,500 VDC)
Wide output range (5 ~ 40 VDC)
High-sink current on isolated output channels
(200 mA max./channel)
Output status readback
Keeps the output settings and values after system hot reset
Channel-freeze function
High-density 100-pin SCSI connector
Specifications
Isolated Digital Output
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Channels
64 (16-ch/group)
Output Type
Sink (NPN)
Isolation Protection
2,500 VDC
Output Voltage
5 ~ 40 VDC
Sink Current
200 mA max./channel
Opto-isolator Response 25 µs
General
ƒƒ Bus Type
ƒƒ I/O Connectors
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Universal PCI V2.2
1 x 100-pin SCSI female
connector
Dimensions (L x H)
175 x 100mm (6.9" x 3.9")
Power Consumption
Typical: 5 V @ 230 mA
Max.: 5 V @ 500 mA
Operating Temperature 0 ~ 60°C (32 ~ 140°F)
Storage Temperature -20 ~ 70°C (-4 ~ 158°F)
Storage Humidity
5 ~ 95%, RH non-condensing
Ordering Information
ƒƒ PCI-1752U
Accessories
ƒƒ PCL-10250-1E
ƒƒ ADAM-3951
64 isolated digital input channels
Either ± voltage input for DI by group
High-voltage isolation on input channels (2,500 VDC)
High over-voltage protection (70 VDC)
Wide input range (10 ~ 50 VDC)
2,000 VDC ESD protection
Interrupt handling capability
High-density 100-pin SCSI connector
Specifications
Isolated Digital Input
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Isolated Digital Input
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCI V2.2
1 x 100-pin SCSI female
connector
Dimensions (L x H)
175 x 100mm (6.9" x 3.9")
Power Consumption
Typical: 5 V @ 340 mA
Max.: 5 V @ 450 mA
Operating Temperature 0 ~ 60°C (32 ~ 140°F)
Storage Temperature -20 ~ 70°C (-4 ~ 158°F)
Storage Humidity
5 ~ 95% RH, non-condensing
64-ch Isolated Digital Output
Universal PCI Card
ƒƒ
ƒƒ
ƒƒ
100-pin SCSI to Two 50-pin
SCSI Cable, 1 m
50-pin DIN-rail Wiring Board
w/ LED Indicators
ƒƒ PCI-1754
Ordering Information
64-ch Isolated Digital Input PCI
Card
Accessories
ƒƒ PCL-10250-1E
ƒƒ ADAM-3951
32 (16-ch/group)
Logic 0: 3 V max.
Logic 1: 10 V min. (50 V max.)
Interrupt Capable Ch. 2 (IDI0, IDI16)
Isolation Protection
2,500 VDC
Overvoltage Protection 70 VDC
ESD
2,000 VDC
Opto-Isolator Response 25 µs
Input Current
10 VDC @ 1.7 mA,
12 VDC @ 2.1 mA
24 VDC @ 4.4 mA,
48 VDC @ 9.0 mA
50 VDC @ 9.4 mA
Isolated Digital Output
General
ƒƒ Bus Type
ƒƒ I/O Connectors
ƒƒ
ƒƒ
2002/95/EC
Specifications
ƒƒ Channels
ƒƒ Input Voltage
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
COMPLIANT
Either ± voltage input for DI by group
High-voltage isolation input/output channels (2,500 VDC)
2,000 VDC ESD protection for DI
High over-voltage protection (70 VDC) for DI
High-sink current on isolated output channels (200 mA
max./channel)
Output status readback
Keeps output settings/ values after system hot reset
Interrupt handling capability
High-density 100-pin SCSI connector
ƒƒ Channels
ƒƒ Input Voltage
64 (16-ch/group)
Logic 0: 3 V max.
Logic 1: 10 V min. (50 V max.)
Input Current
10 VDC @ 1.7 mA,
(Typical) 12 VDC @ 2.1 mA
24 VDC @ 4.4 mA,
48 VDC @ 9.0 mA
50 VDC @ 9.4 mA
Interrupt Capable Ch. 4
Isolation Protection
2,500 VDC
Overvoltage Protection 70 VDC
ESD
2,000 VDC
Opto-Isolator Response 25 µs
RoHS
PCI-1756
COMPLIANT
100-pin SCSI to Two 50-pin
SCSI Cable, 1 m
50-pin DIN-rail Wiring Board
w/ LED Indicators
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Channels
Output Type
Isolation Protection
Output Voltage
Sink Current
Opto-isolator Response
32 (16-ch/group)
Sink (NPN)
2,500 VDC
5 ~ 40 VDC
200 mA max./channel
25 µs
General
ƒƒ Bus Type
ƒƒ I/O Connectors
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCI V2.2
1 x 100-pin SCSI female
connector
Dimensions (L x H)
175 x 100mm (6.9" x 3.9")
Power Consumption
Typical: 5 V @ 285 mA
Max.: 5 V @ 475 mA
Operating Temperature 0 ~ 60°C (32 ~ 140°F)
Storage Temperature -20 ~ 70°C (-4 ~ 158°F)
Storage Humidity
5 ~ 95%, non-condensing
Ordering Information
ƒƒ PCI-1756
64-ch Isolated Digital I/O PCI
Card
Accessories
ƒƒ PCL-10250-1E
ƒƒ ADAM-3951
18-42
Data Acquisition Boards
100-pin SCSI to Two 50-pin
SCSI Cable, 1 m
50-pin DIN-rail Wiring Board w/
LED Indicators
PCI-1758UDI
PCI-1758UDO
PCI-1758UDIO
128-ch Isolated Digital Input Universal PCI
Card
128-ch Isolated Digital Output Universal
PCI Card
128-ch Isolated Digital I/O Universal PCI
Card
Features
PCI-1758UDO and PCI-1758UDIO
ƒƒ 128 isolated digital output channels (64 channels for PCI-1758UDIO)
ƒƒ High-voltage isolation on output channels (2,500 VDC)
ƒƒ Wide output range (5 ~ 40 VDC)
ƒƒ High-sink current for isolated output channels (90 mA max./channel)
ƒƒ Current protection for each port
ƒƒ BoardID™ switch
ƒƒ Output status read-back
ƒƒ Digital output value retained after hot system reset
ƒƒ Programmable Power-up States
ƒƒ Watchdog timer
PCI-1758UDI
PCI-1758UDO
PCI-1758UDI and PCI-1758UDIO
ƒƒ 128 isolated digital input channels (64 channels for PCI-1758UDIO)
ƒƒ Wide input range (5 ~ 25 VDC)
ƒƒ High ESD protection (2,000 VDC)
ƒƒ Digital Filter function
ƒƒ BoardID™ switch
ƒƒ Interrupt handling capability for each channel
PCI-1758UDIO
COMPLIANT
2002/95/EC
Specifications
Feature Details
Isolated Digital Input
Interrupt Function (PCI-1758UDI/PCI-1758UDIO)
ƒƒ Channels
PCI-1758UDI and PCI-1758UDIO provide an interrupt function for every digital input
channel. You can disable/enable the interrupt functions, and select trigger type by setting
the Rising Edge Interrupt Registers or Falling Edge Interrupt Registers of the card. When
the interrupt request signals occur, software will service these interrupt requests by ISR.
The multiple interrupt sources provide the card with more flexibility.
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
The digital filter function is used to eliminate glitches on input data and reduce the
number of changes to examine and process. The filter blocks pulses that are shorter than
the specified timing interval and passes pulses that are twice as long as the specified
interval. Intermediate-length pulses that are longer than half of the interval, but less than
the interval, may or may not pass the filter.
Isolated Digital Output
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCI-1758UDO: 128
PCI-1758UDIO: 64
Output Type
Sink (NPN)
Isolation Protection
2,500 VDC
Output Voltage
5 ~ 40 VDC
Sink Current
90 mA max./channel
Opto-isolator Response20 µs
Pin Assignments
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
Typical
Max.
Universal PCI V2.2
1 x mini-SCSI HDRA-E100 female connector
175 x 100 mm (6.9" x 3.9")
PCI-1758UDI
5 V @ 0.3 A
5 V @ 0.6 A
PCI-1758UDO
5 V @ 1.1 A
5 V @ 2.2 A
PCI-1758UDIO
5 V @ 1.2 A
5 V @ 1.8 A
ƒƒ Operating Temperature 0 ~ 60°C (32 ~ 140°F) (IEC 68-2-1, 2)
ƒƒ Storage Temperature -20 ~ 70°C (-4 ~ 158°F)
ƒƒ Storage Humidity
5 ~ 95% non-condensing
Ordering Information
ƒƒ PCI-1758UDI ƒƒ PCI-1758UDO
ƒƒ PCI-1758UDIO
128-ch Isolated DI Universal PCI Card
128-ch Isolated DO Universal PCI Card
128-ch Isolated Digital I/O Universal PCI Card
Accessories
ƒƒ PCL-101100S-1E
ƒƒ PCL-101100S-2E
ƒƒ ADAM-39100
100-pin Mini-SCSI Cable, 1 m
100-pin Mini-SCSI Cable, 2 m
100-pin DIN-rail SCSI Wiring Board
Automation Software
Intelligent Operator
Panel
PEF_COMM
PEF_COMM
PF_IDI07
PF_IDI06
PF_IDI05
PF_IDI04
PF_IDI03
PF_IDI02
PF_IDI01
PF_IDI00
PE_IDI07
PE_IDI06
PE_IDI05
PE_IDI04
PE_IDI03
PE_IDI02
PE_IDI01
PE_IDI00
NC
NC
NC
NC
NC
NC
NC
NC
PCD_COMM
PCD_COMM
PD_IDI07
PD_IDI06
PD_IDI05
PD_IDI04
PD_IDI03
PD_IDI02
PD_IDI01
PD_IDI00
PC_IDI07
PC_IDI06
PC_IDI05
PC_IDI04
PC_IDI03
PC_IDI02
PC_IDI01
PC_IDI00
NC
NC
NC
NC
NC
NC
100
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CNA
PAB_COMM
PAB_COMM
PB_IDI07
PB_IDI06
PB_IDI05
PB_IDI04
PB_IDI03
PB_IDI02
PB_IDI01
PB_IDI00
PA_IDI07
PA_IDI06
PA_IDI05
PA_IDI04
PA_IDI03
PA_IDI02
PA_IDI01
PA_IDI00
NC
NC
NC
NC
NC
NC
NC
NC
P89_COMM
P89_COMM
P9_IDI07
P9_IDI06
P9_IDI05
P9_IDI04
P9_IDI03
P9_IDI02
P9_IDI01
P9_IDI00
P8_IDI07
P8_IDI06
P8_IDI05
P8_IDI04
P8_IDI03
P8_IDI02
P8_IDI01
P8_IDI00
NC
NC
NC
NC
NC
NC
Industrial Wireless
Solutions
Industrial Ethernet
Solutions
Industrial Gateway
Solutions
Serial communication
cards
Embedded Automation
PCs
CNB
General
Power & Energy
Automation
Panel PCs
Digital Filter Function (PCI-1758UDI/PCI-1758UDIO)
ƒƒ Channels
Motion Control
Automation Panels
RoHS
PCI-1758UDI: 128
PCI-1758UDIO: 64
Input Voltage
Logic 0: 2.5 V max.
Logic 1: 5 V min. (25 V max.)
Interrupt Capable Ch. PCI-1758UDI: 128
PCI-1758UDIO: 64
Isolation Protection
2,500 VDC
Opto-Isolator Response 20 µs
Input Resistance 3 kW
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
WebAccess+ Solutions
NC
NC
NC
NC
NC
NC
P0_IDI00
P0_IDI01
P0_IDI02
P0_IDI03
P0_IDI04
P0_IDI05
P0_IDI06
P0_IDI07
P1_IDI00
P1_IDI01
P1_IDI02
P1_IDI03
P1_IDI04
P1_IDI05
P1_IDI06
P1_IDI07
P01_COMM
P01_COMM
NC
NC
NC
NC
NC
NC
NC
NC
P2_IDI00
P2_IDI01
P2_IDI02
P2_IDI03
P2_IDI04
P2_IDI05
P2_IDI06
P2_IDI07
P3_IDI00
P3_IDI01
P3_IDI02
P3_IDI03
P3_IDI04
P3_IDI05
P3_IDI06
P3_IDI07
P23_COMM
P23_COMM
Online Download www.advantech.com/products
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
NC
NC
NC
NC
NC
NC
P4_IDI00
P4_IDI01
P4_IDI02
P4_IDI03
P4_IDI04
P4_IDI05
P4_IDI06
P4_IDI07
P5_IDI00
P5_IDI01
P5_IDI02
P5_IDI03
P5_IDI04
P5_IDI05
P5_IDI06
P5_IDI07
P45_COMM
P45_COMM
NC
NC
NC
NC
NC
NC
NC
NC
P6_IDI00
P6_IDI01
P6_IDI02
P6_IDI03
P6_IDI04
P6_IDI05
P6_IDI06
P6_IDI07
P7_IDI00
P7_IDI01
P7_IDI02
P7_IDI03
P7_IDI04
P7_IDI05
P7_IDI06
P7_IDI07
P67_COMM
P67_COMM
DIN-Rail IPCs
CompactPCI Systems
IoT Wireless I/O
Modules
IoT Ethernet I/O
Modules
RS-485 I/O Modules
Data Acquisition
Boards
18-43
8-ch Relay and 8-ch Isolated Digital
Input Universal PCI Card with 8-ch
Counter/Timer
PCI-1760U
Features
ƒƒ 8 opto-isolated digital input channels
ƒƒ 8 relay actuator output channels
ƒƒ 2 opto-isolated PWM outputs
ƒƒ LED indicators to show activated relays
ƒƒ Jumper selectable dry contact/wet contact input signals
ƒƒ Up event counters for DI
ƒƒ Programmable digital filter function for DI
ƒƒ Pattern match interrupt function for DI
ƒƒ "Change of state" interrupt function for DI
ƒƒ Universal PCI and BoardID switch
RoHS
COMPLIANT
2002/95/EC
Introduction
PCI-1760U relay actuator and isolated digital input card is a PC add-on card for the PCI bus. It meets the PCI standard Rev. 2.2 (Universal PCI expansion card), and works with both
3.3 V and 5 V PCI slots. It provides 8 opto-isolated digital inputs with isolation protection of 2,500 VDC for collecting digital inputs in noisy environments, 8 relay actuators that can
be used as a on/off control devices or small power switches, and 2 isolated PWM (Pulse Width Modulation) outputs for custom applications.
For easy monitoring, each relay is equipped with one red LED to show its on/off status. Each isolated input supports both dry contact and wet contact so that it can easily interface
with other devices when no voltage is present in the external circuit.
Specifications
Isolated Digital Input
General
ƒƒ Channels
ƒƒ Input Voltage
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
8
Logic 0: 1.0 V max.
Logic 1: 4.5 V min. (12 V max.)
Interrupt Capable
Ch. 8 (IDI0 ~ IDI7)
Isolation Protection
2,500 VDC
Opto-Isolator Response100 μs
Input Resistance
2 k Ohm @ 1/4 W
Counter/Timer
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Channels Resolution Compatibility Max. Input Frequency Isolation Protection PWM Channels Digital Noise Filter 8
16 bits
5 V/TTL
500 Hz
2,500 VDC
2
Min. effective high input period ≥ [(2 ~ 65535) x 5 ms]
+ 5 ms
Min. effective low input period ≥ [(2 ~ 65535) x 5 ms]
+ 5 ms
Relay Output
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
18-44
Channels 8
Relay Type 2 x Form C, and 6 x Form A
Contact Rating 1 A @ 125 VAC, 2 A @ 30 VDC
Max. Switching Power 125 VA, 60 W
Max. Switching Voltage 250 VAC, 220 VDC
Max. Switching Current 2 A
Operate/Release Time max. 5 / 3.5 ms
Resistance Contact: 50 mW max.
Life Expectancy 3 x 105 cycles min.: 2 A @ 30 VDC, 1 A @ 125 VAC
(Electrical)106 cycles min.: 1 A @ 30 VDC, 0.5 A @ 125 VAC
Data Acquisition Boards
Bus Type
I/O Connectors Dimensions (L x H) Power Consumption Universal PCI V2.2
1 x DB37 female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 450 mA
Max.: 5 V @ 850 mA
ƒƒ Operating Temperature 0 ~ 60°C (32 ~ 140°F)
ƒƒ Storage Temperature -20 ~ 70°C (-4 ~ 158°F)
ƒƒ Storage Humidity 5 ~ 95 % RH, non-condensing
Ordering Information
ƒƒ PCI-1760U 8-ch Relay/IDI PCI Card w/ 8-ch Counter/Timer
Accessories
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCL-10137-1E PCL-10137-2E PCL-10137-3E ADAM-3937 DB37 Cable, 1 m
DB37 Cable, 2 m
DB37 Cable, 3 m
DB37 DIN-rail Wiring Board
PCI-1761
8-ch Relay and 8-ch Isolated Digital
Input PCI Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
WebAccess+ Solutions
ƒƒ 8 opto-isolated digital input channels
ƒƒ 8 relay actuator output channels
ƒƒ LED indicators to show activated relays
ƒƒ BoardID switch
Motion Control
Power & Energy
Automation
Automation Software
Intelligent Operator
Panel
Automation Panels
RoHS
COMPLIANT
2002/95/EC
Introduction
Panel PCs
The PCI-1761 provides 8 opto-isolated digital inputs with isolation protection of 2,500 VDC for collecting digital inputs in noisy environments, 8 relay actuators that can be used as
a on/off control devices or small power switches.
For easy monitoring, each relay is equipped with one red LED to show its on/off status. Each isolated input supports both dry contact and wet contact so that it can easily interface
with other devices when no voltage is present in the external circuit.
Industrial Wireless
Solutions
Specifications
Industrial Ethernet
Solutions
Isolated Digital Input
General
ƒƒ Channels
ƒƒ Input Voltage
ƒƒ I/O Connectors
ƒƒ Dimensions (L x H)
ƒƒ Power Consumption
ƒƒ
ƒƒ
ƒƒ
ƒƒ
8
Logic 0: 3.0 V max.
Logic 1: 10 V min. (50 V max.)
Interrupt Capable Ch. 8 (IDI0 ~ IDI7)
Isolation Protection
2,500 VDC
Opto-Isolator Response100 µs
Input Resistance
5.7 k Ohm @ 1 W
Relay Output
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Channels
8
Relay Type
4 x Form C, and 4 x Form A
Contact Rating
2 A @ 250 VAC, 2 A @ 30 VDC
Max. Switching Power 500 VA, 60 W
Max. Switching Voltage400 VAC, 300 VDC
Operating Time
Typical: 7 ms, Max: 15 ms
Release Time
Typical: 2 ms, Max: 6 ms
Resistance
Contact: 100 m Ohm max.
Life Expectancy 2 x 105 cycles min. @ 2A/ 250VAC
1 x DB37 female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 220 mA
Max.: 5 V @ 750 mA
ƒƒ Operating Temperature 0 ~ 60°C (32 ~ 140°F)
ƒƒ Storage Temperature -20 ~ 70°C (-4 ~ 158°F)
ƒƒ Storage Humidity
5 ~ 95 % RH, non-condensing
Ordering Information
ƒƒ PCI-1761 8-ch Relay and 8-ch Isolated Digital Input PCI Card
Accessories
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCL-10137-1E
PCL-10137-2E
PCL-10137-3E
ADAM-3937
DB37 Cable, 1 m
DB37 Cable, 2 m
DB37 Cable, 3 m
DB37 DIN-rail Wiring Board
Industrial Gateway
Solutions
Serial communication
cards
Embedded Automation
PCs
DIN-Rail IPCs
CompactPCI Systems
IoT Wireless I/O
Modules
IoT Ethernet I/O
Modules
RS-485 I/O Modules
Data Acquisition
Boards
Online Download www.advantech.com/products
18-45
PCI-1762
16-ch Relay and 16-ch Isolated Digital
Input PCI Card
Features
ƒƒ 16 opto-isolated digital input channels
ƒƒ 16 relay actuator output channels
ƒƒ LED indicators to show activated relays
ƒƒ Jumper selectable dry contact/wet contact input signals
ƒƒ BoardID switch
RoHS
COMPLIANT
2002/95/EC
Introduction
The PCI-1762 provides 16 opto-isolated digital inputs with isolation protection of 2,500 VDC for collecting digital inputs in noisy environments, 16 relay actuators that can be used
as a on/off control devices or small power switches.
For easy monitoring, each relay is equipped with one red LED to show its on/off status. Each isolated input supports both dry contact and wet contact so that it can easily interface
with other devices when no voltage is present in the external circuit.
Specifications
Isolated Digital Input
General
ƒƒ Channels
ƒƒ Input Voltage
ƒƒ I/O Connectors
ƒƒ Dimensions (L x H)
ƒƒ Power Consumption
ƒƒ
ƒƒ
ƒƒ
ƒƒ
16
Logic 0: 3.0 V max.
Logic 1: 10 V min. (50 V max.)
Interrupt Capable Ch. 2 (IDI0,IDI8)
Isolation Protection
2,500 VDC
Opto-Isolator Response100 µs
Input Resistance
5.7 k Ohm 1 W
Relay Output
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
18-46
Channels
16
Relay Type
Form A or Form B (Jumper selectable)
Contact Rating
0.5 A @ 250 VAC, 0.5 A @ 30 VDC
Max. Switching Power 125 VA, 15 W
Max. Switching Voltage250 VAC, 220 VDC
Operate Time
Typical: 3 ms, Max.: 5 ms
Release Time
Typical: 2 ms, Max.: 4 ms
Resistance
Contact: 50 m Ohm max.
Life Expectancy 2 x 105 cycles min. @ 0.5A/ 250VAC
Data Acquisition Boards
1 x DB62 female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 250 mA
Max.: 5 V @ 620 mA
ƒƒ Operating Temperature 0 ~ 60°C (32 ~ 140°F)
ƒƒ Storage Temperature -20 ~ 70°C (-4 ~ 158°F)
ƒƒ Storage Humidity
5 ~ 95 % RH, non-condensing
Ordering Information
ƒƒ PCI-1762 16-ch Relay and 16-ch Isolated Digital Input PCI Card
Accessories
ƒƒ PCL-10162-1E
ƒƒ PCL-10162-3E
ƒƒ ADAM-3962
DB62 Cable, 1 m
DB62 Cable, 3 m
DB62 DIN-rail Wiring Board
PCI-1780U
8-ch, 16-bit Counter/Timer Universal PCI
Card
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
WebAccess+ Solutions
ƒƒ 8 independent 16-bit counters
ƒƒ 8 programmable clock source
ƒƒ 8 digital TTL outputs and 8 digital TTL inputs
ƒƒ Up to 20 MHz input frequency
ƒƒ Multiple counter clock source selectable
ƒƒ Counter output programmable
ƒƒ Counter gate function
ƒƒ Flexible interrupt source select
ƒƒ BoardID™ switch
Motion Control
Power & Energy
Automation
Automation Software
Intelligent Operator
Panel
Automation Panels
RoHS
COMPLIANT
2002/95/EC
Introduction
Panel PCs
PCI-1780U is a general purpose multi-channel counter/timer PCI card. It targets the AM9513 to implement the counter/timer function by CPLD. It provides eight 16-bit counter
channels, 8 digital outputs and 8 digital inputs. Its powerful counter functions cater to a broad range of industrial and laboratory applications.
The card features 12 programmable counter modes, to provide one shot output, PWM output, periodic interrupt output, time-delay output, and to measure the frequency and the pulse
width. The PCL-10168 shielded cable works well with PCI-1780U to reduce noise. Its wires are all twisted pairs, and the input signals and output signals are separately shielded,
providing minimal cross talk between signals and the best protection against EMI/EMC problems.
Industrial Ethernet
Solutions
Specifications
Digital Input
General
ƒƒ Channels
ƒƒ Compatibility
ƒƒ Input Voltage
ƒƒ
ƒƒ
ƒƒ
ƒƒ
8
5 V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
ƒƒ Interrupt Capable Ch. Ch. 0
Digital Output
ƒƒ Channels
ƒƒ Compatibility
ƒƒ Output Voltage
ƒƒ Output Capability
8
5 V/TTL
Logic 0: 0.8 V
Logic 1: 2.0 V
Sink: 24 mA @ 0.8V
Source: -15 mA @ 2.0V
Counter/Timer
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Channels
Resolution
Compatibility
Max. Input Frequency
Reference Clock
Industrial Wireless
Solutions
8 (independent)
16 bits
5 V/TTL
20 MHz
Internal: 20 MHz
External clock: 20 MHz max.
ƒƒ Counter Modes
12 (programmable)
ƒƒ Interrupt Capable Ch. 8
ƒƒ PWM Channels
8
Industrial Gateway
Solutions
Bus Type
I/O Connectors
Dimensions (L x H)
Power Consumption
Universal PCI V2.2
1 x 68-pin SCSI female connector
175 x 100 mm (6.9" x 3.9")
Typical: 5 V @ 900 mA
Max.: 5 V @ 1.2 A
ƒƒ Operating Temperature 0 ~ 60°C (32 ~ 140°F)
ƒƒ Storage Temperature -20 ~ 70°C (-4 ~ 158°F)
ƒƒ Storage Humidity
5 ~ 95% RH, non-condensing
Ordering Information
ƒƒ PCI-1780U
8-ch, 16-bit Counter/Timer Universal PCI Card
Embedded Automation
PCs
DIN-Rail IPCs
CompactPCI Systems
Accessories
ƒƒ PCL-10168-1E
ƒƒ PCL-10168-2E
ƒƒ ADAM-3968
Serial communication
cards
68-pin SCSI Shielded Cable, 1 m
68-pin SCSI Shielded Cable, 2 m
68-pin DIN-rail SCSI Wiring Board
IoT Wireless I/O
Modules
IoT Ethernet I/O
Modules
RS-485 I/O Modules
Data Acquisition
Boards
Online Download www.advantech.com/products
18-47
PCI-1784U
4-ch, 32-bit Encoder Counter Universal
PCI Card with 8-ch Isolated Digital I/O
Features
ƒƒ Four 32-bit encoder counters
ƒƒ Single-ended or differential inputs
ƒƒ Quadrature (x1, x2, x4), pulse/direction, and up/down counting modes
ƒƒ Optically isolated up to 2,500 VDC
ƒƒ 4-stage digital filter with selectable sampling rate
ƒƒ On-board 8-bit timer with wide range time-base selector
ƒƒ Multiple interrupt sources for precision applications
ƒƒ 4 isolated digital inputs and 4 isolated digital outputs
ƒƒ BoardIDTM switch
RoHS
COMPLIANT
2002/95/EC
Introduction
PCI-1784U is a 4-ch encoder counter universal PCI card. It includes four 32-bit encoder counters, 8-bit timer with multiple range time-base selector, 4 isolated digital inputs, and 4
isolated digital outputs. Its flexible interrupt sources are suitable for motor control and position monitoring.
Specifications
Encoder Counter
Isolated Digital Output
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ Channels
ƒƒ Output Voltage
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Channels
Resolution
Counting Modes
Max. Input Frequency
4
32 bits
Quadrature, pulse/direction, or up/down
8 MHz for pulse/direction and up/down modes
2 MHz for quadrature mode without digital filter
1 MHz for quadrature mode with digital filter
Digital Filter
4 stages
Isolation
2,500 VDC
Sample Clock Frequency8, 4, 2, or 1 MHz
Interrupt Sources
Overflow, underflow, index status, counter over
compare, counter under compare
Input Voltage
Single-ended:
Logic 0: 0.8 V max.
Logic 1: 2.8 V min. (12 V max.)
Differential:
Logic 0: -0.2 V max. (-12 V min.)
Logic 1: 0.2 V min. (12 V max.)
Isolated Digital input
ƒƒ Channels
ƒƒ Input Voltage
ƒƒ
ƒƒ
ƒƒ
ƒƒ
18-48
4
Logic 0: 3 V max
Logic 1: 10 V min. (30 V max.)
Interrupt Capable
All 4 channels
Isolation
2,500 VDC
Opto-Isolator Response100 μs
Overvoltage Protection 70 VDC
Data Acquisition Boards
4
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
ƒƒ Output Capability
50 mA @ 0.8 V
-50 mA @ 2.0 V
ƒƒ Isolation
2,500 VDC
ƒƒ Opto-Isolator Response2 μs
General
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Bus Type
Connector
Dimension (L x H)
Power Consumption
Universal PCI V2.2
37-pin D-sub female
175 x 100 mm2 (6.9" x 3.9")
Typical: +5 V @ 200 mA
Max.: +5 V @ 450 mA
Operating Temperature 0 ~ 60°C (32 ~ 140°F)
Storage Temperature -20 ~ 70°C (-4 ~ 158°F)
Storage Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Certification
CE
Ordering Information
ƒƒ PCI-1784U
ƒƒ PCL-10137H-3E
ƒƒ ADAM-3937
4-ch encoder counter universal PCI card
High-speed DB37 cable, 3 m
DB37 DIN-rail wiring board
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement