Sharp | LC-13AV6U | Instruction manual | Sharp LC-13AV6U Instruction manual

OPERATION
MANUAL
LCD COLOR TV
LC-13AV4U (13 INCH EASEL TYPE TABLE STAND)
LC-15AV4U (15 INCH PEDESTAL TYPE TABLE STAND)
LC-20AV4U (20 INCH PEDESTAL TYPE TABLE STAND)
FEATURES
● MTS/SAP Tuner
● 181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels.
● PLL Frequency Synthesized Tuning- The latest PLL frequency synthesized
electronic tuning system provides free and easy channel selection and lets you tune
directly to any channel using the Number buttons (0~9 and +100-key) on the
remote control.
● On-Screen Function Display
● Remote Control
● Sleep Timer
● Closed Caption Decoder- You may view specially labeled (cc) TV programs,
movies, news, prerecorded tapes, etc. with either a dialogue caption or text display
added to the program.
● Auto Shut Off Function- If there is no signal input from the antenna terminal for
5 minutes or no user operation for 180 minutes, the TV will turn itself off automatically.
● AV Mode- Allows you to select from five picture options that will adjust colors to
enhance your viewing experience.
● V-CHIP- Enables parents to prevent their children from watching inappropriate material on TV.
● S-VIDEO Input- Allows you to get better picture detail and clarity for the playback
of S-VHS VCR tapes, DVDs, Satellite System or Video Cameras.
● Progressive Scan Input- You can enjoy high quality definition using the
Component Video input jacks if you connect other equipment that has Progressive
Scan System.
SUPPLIED ACCESSORIES
Operation Manual
(9HS1EMN20472)
(9HS1EMN20473)
Remote control unit
(9HSUREMT21SH001)
Batteries ("AA" x 2)
PRECAUTIONS
●
●
●
●
Place your TV in a room with adequate ventilation.
Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.
Do not place your TV on soft surfaces, such as rugs or blankets.
Leave enough room for air to circulate around the bottom, top and back of the set.
This manual describes the LC-13AV4U, LC-15AV4U
and LC-20AV4U. These three models are different
in size and shape, but operate identically.
The LC-20AV4U is illustrated in this manual.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF
ELECTRIC SHOCK IS PRESENT WITHIN THIS
UNIT.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT THERE ARE
IMPOTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE LITERATURE
ACCOMPANYING THE APPLIANCE.
The important note is located on the rear of the cabinet.
WARNING:
CAUTION:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
CAUTION:
DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY FALL
CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND,
TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE
MANUFACTURER’S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES
RECOMMENDED BY THE MANUFACTURER. A PRODUCT AND CART COMBINATION SHOULD BE MOVED WITH CARE. QUICK
STOPS, EXCESSIVE FORCE, AND UNEVEN SURFACES MAY CAUSE THE PRODUCT AND CART COMBINATION TO OVERTURN.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are
expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
U.S.A. ONLY
Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electrical Code that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these materials may be regulated due to environmental considerations.
For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eia.org
• The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or applied with impact. Be careful not to be injured by broken
glass pieces in case the LCD panel breaks.
• The LCD panel is a very high technology product with 921,600 thin film transistors, giving you fine picture details. Occasionally, a few non-active pixels may appear on
the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product.
• To prevent fire, never place any type of candle or flames on the top or near the TV set.
• To prevent fire or shock hazard, do not expose this product to dripping or splashing. No objects filled with liquids, such as vases, should be placed on the product.
The serial number of this product may be found on the back of the TV. No others have the same serial number as yours. You should record the number and other
vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft.
U.S.A. ONLY
IMPORTANT:
Model No.:
To aid reporting in case of loss or theft, please record the TV’s model and serial numbers in the space provided.
Serial No.:
The numbers are located at the rear of the TV.
Products that have earned the ENERGY STAR are designed to protect
the environment through superior energy efficiency.
®
1EMN20472/9HS1EMN20472
L3270UA/L3170UA/L3670UA*****
Printed in China
DEAR SHARP CUSTOMER
Thank you for your purchase of the Sharp LCD COLOR TV. To ensure safety and many years of trouble-free operation of your product,
please read the IMPORTANT SAFEGUARDS carefully before using this product.
IMPORTANT SAFEGUARDS
1. Read instructions-All the safety and operating instructions should be read before
the appliance is operated.
2. Retain Instructions-The safety and operating instructions should be retained for
future reference.
3. Heed Warnings-All warnings on the appliance and in the operating instructions
should be adhered to.
4. Follow Instructions-All operating and use instructions should be followed.
5. Cleaning-Unplug TV from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted service and that for some
specific reason, such as the possibility of the loss of an authorization code for a
CATV converter, is not intended to be unplugged by the user for cleaning or any
other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.
6. Attachments-Do not use attachments not recommended by the TV manufacturer as
they may cause hazards.
7. Water and Moisture-Do not use this TV near water, for example, near a bath tub,
wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming
pool, and the like.
8. Accessories-Do not place this TV on an unstable cart,
PORTABLE CART WARNING
stand, tripod, bracket, or table. The TV may fall, causing
serious injury to someone, and serious damage to the
appliance. Use only with a cart, stand, tripod, bracket, or
table recommended by the manufacturer, or sold with
the TV.
Any mounting of the appliance should follow the manufacturer’s instructions and should use a mounting accesS3126A
sory recommended by the manufacturer. An appliance
and cart combination should be moved with care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart combination to overturn.
9. Ventilation-Slots and openings in the cabinet and the back or bottom are provided
for ventilation and to ensure reliable operation of the TV and to protect it from overheating, these openings must not be blocked or covered. The openings should never
be blocked by placing the TV on a bed, sofa, rug, or other similar surface. This TV
should never be placed near or over a radiator or heat register. This TV should not
be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
10. Power Sources-This TV should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power supply to
your home, consult your appliance dealer or local power company. For TVs intended to operate from battery power, or other sources, refer to the operating instructions.
11. Grounding or Polarization-This TV is equipped with a polarized alternating-current
line plug(a plug having one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the plug should still fail to fit,
contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12. Power-Cord Protection-Power-supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they
exit from the appliance.
13. Outdoor Antenna grounding-If an outside antenna or cable system is connected to
the TV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National
Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper
grounding of the mast and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location of antenna-discharge
unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A)
FIGURE A
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
NEC - NATIONAL ELECTRICAL CODE
S2898A
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
14. Lightning-For added protection for this TV receiver during a lightning storm, or
when it is left unattended and unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable system. This will prevent damage to
the TV due to lightning and power-line surges.
15. Power Lines-An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light of power circuits, or where it can fall
into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits as
contact with them might be fatal.
16. Overloading-Do not overload wall outlets and extension cords as this can result in a
risk of fire or electric shock.
17. Object and Liquid Entry-Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short out parts that could result
in a fire or electric shock. Never spill liquid of any kind on the TV.
18. Servicing-Do not attempt to service this TV yourself as opening or removing covers
may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
19. Damage Requiring Service-Unplug this TV from the wall outlet and refer servicing
to qualified service personnel under the following conditions:
a. When the power supply cord or plug is damaged or frayed.
b. If liquid has been spilled, or objects have fallen into the TV.
c. If the TV has been exposed to rain or water.
d. If the TV does not operate normally by following the operating instructions. Adjust
only those controls that are covered by the operating instructions, as improper
adjustment of other controls may result in damage and will often require extensive
work by a qualified technician to restore the TV to its normal operation.
e. If the TV has been dropped or damaged in any way.
f. When the TV exhibits a distinct change in performance-this indicates a need for
service.
20. Replacement Parts-When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric
shock, injury to persons or other hazards.
21. Safety Check-Upon completion of any service or repairs to this TV, ask the service
technician to perform routine safety checks to determine that the TV is in proper
operating condition.
22. Heat-This TV product should be situated away from heat sources such as radiators,
heat registers, stoves, or other products (including amplifiers) that produce heat.
CONNECTIONS
[ANTENNA CONNECTION]
VHF Antenna
(Not supplied)
UHF Antenna
(Not supplied)
[CATV/SATELLITE CONNECTION]
VHF/UHF
Combination Antenna
(Not supplied)
CATV Box *
or Satellite Box
(Not supplied)
OUT
RF Cable
(Not supplied)
VHF/UHF Combiner
(Not supplied)
OR
IN
75-ohm
Coaxial Cable
(Not supplied)
OR
OR
*Some cable TV systems use scrambled signals
and require a special converter to receive these
channels. Consult your local cable company.
From Cable System
or Satellite Antenna
75-ohm
Coaxial Cable
(Not supplied)
From Cable System
LC-20AV4U
OPERATING CONTROLS AND FUNCTIONS
LC-13AV4U
LC-15AV4U
LC-20AV4U
1
7 1
2
3
4
2
1. MENU button- Press to display the menu on the TV screen.
2. VOL (ume) +/– buttons- Press to control the volume level.
Press to determine the setting mode from the menu on the TV screen.
- Press the VOL + button to select each item.
- Press the VOL – button to go back to the previous menu.
Press to select or adjust from a particular menu (for example:
Language Selection, Channel Presetting, Closed Caption selection,
AV mode selection, adjust of the Picture control adjustments or VCHIP Set Up).
3. CH (annel) ▲/▼ buttons- Press to select memorized channels.
Press to select the setting mode from the menu on the TV screen.
Press to select item you want to adjust in the picture control mode.
4. INPUT button- Press to select TV or Video input (AV1 or AV2)
mode. (See USING AUDIO/VIDEO INPUT JACKS.)
5. POWER button- Press to turn the TV ON or OFF (standby).
6. Power indicator- Lights up when power is on.
7. Infrared Sensor Window
8. Number buttons- Press two digits to directly access the desired channel. Remember to press a "0" before a single digit channel.
100 button- Press to select cable channels higher than 99.
9. FLASHBACK button- Press to go back to the previously viewed
channel. For example, pressing this button once will change channel
display from CH 6 (present channel) to CH 10 (previously viewed
channel) and pressing it a second time will return from CH 10 to CH 6.
10. MUTE button- Press to mute the sound portion of the TV program
(Volume level display turns light RED from light BLUE). Press this
button again or press the VOL + or – button to recall sound.
LC-20AV4U
12
13
14
15
16
17
4
7
11. DISPLAY button- Press to display
REMOTE CONTROL
on screen the channel number, input
source, TV sound or the remaining
minutes on your sleep timer. If you
press it again, the display will disap4
5
pear.
1
2
3
12. COMPONENT (Y/PB/PR) Video
8
4
5
6
input jacks- AV2: Connect to the
component video out jacks of a
7
8
9
DVD or set top box, etc.
100
0
9
If HDTV (720p/1080i) signals are
input to these jacks, "NOT
3
AVAILABLE" will appear on the
black background.
2
13. AUDIO L/R input jacks- AV2:
1
Connect to the left/right audio output
11
jacks of a DVD or set top box, etc.
10
14. S-VIDEO input jack- AV1:
Connect to the S-VIDEO output
jack of a video camera or VCR.
Note: When you connect using both
LCDTV
VIDEO and S-VIDEO cables simultaneously, the S-VIDEO jack is
given priority over the VIDEO jack.
15. VIDEO input jack- AV1: Connect
to the video output jack of a video
camera, VCR or video game.
16. AUDIO L/R input jacks- AV1: Connect to the left/right audio output
jacks of a video camera, VCR or video game.
Note: The AUDIO L (input) jack is for monaural input. The sound is
heard from both speakers. Use this jack for monaural audio equipment
to be hooked up.
17. ANT(enna). in jack- Connect to an antenna, cable system or satellite
system.
18. HEADPHONE jack- Connect headphone (not supplied) for personal
listening.
Note: Do not connect earphones that have an L-shaped plug. The plug
may interfere with the cabinet.
[INSTALLING THE BATTERIES]
1) Remove the battery compartment cover on the remote unit.
2) Insert 2 "AA" batteries into battery compartment in the direction as
indicated by the polarity (+/–) markings. Batteries installed with incorrect polarity may damage the remote unit.
3) Replace the cover.
18
TABLE STAND
EASEL TYPE
18°
5
5 6
6
REAR PANEL
3
PEDESTAL TYPE
(LC-13AV4U)
(LC-15AV4U, LC-20AV4U)
The angle of the TV has to be kept at 18°.
Adjust the stand to change the angle of the TV
(-2.5°~10°).
CAUTION :
Be careful not to hurt your fingers with the
stand. Do not pick up the TV by its stand.
CAUTION :
Be careful not to hurt your fingers with the table
stand.
-2.5°
10°
PREPARATION FOR USE
The TV distinguishes between standard TV channels and cable
(CATV) channels.
● When AUTO PRESET CH is completed, the lowest memorized
channel reappears on the screen. When there is no signal to
ANT. in jack, "NO TV SIGNAL" will appears. In this case,
please check the antenna connections, then try again the auto
preset channel.
● After completing AUTO PRESET CH, you can use CH ▲ or ▼
buttons for the memorized channels.
● The TV may memorize TV channels as CATV channels if the
reception conditions are poor. If this happens, try the AUTO
PRESET CH action again when reception conditions are better.
- TV SET UP [ADD/DELETE FUNCTION]
PICTURE
CHANNEL SET UP
1) Press the MENU button so that the menu
V-CHIP SET UP
LANGUAGE
[ENGLISH]
display appears on the TV screen.
CAPTION
[OFF]
SOUND
[MAIN]
BACK LIGHT [BRIGHT]
2) Press the CH ▲ or ▼ button to point to "CHAN- TV
OPTION
NEL SET UP". Then press the VOL + button.
3) Press the CH ▲ or ▼ button to point to
- CHANNEL SET UP "ADD/DELETE CH". Then press the VOL +
AUTO PRESET CH
ADD/DELETE CH (CATV)
button.
4) Deleting a Channel:
● Use the CH ▲ or ▼ button to select the
channel you wish to delete, then press the VOL + button so the
channel number on the top right corner of the TV screen turns
into RED.
Adding a Channel:
● Use the Number buttons to input the channel you wish to add,
then press the VOL + button so the channel number on the top
right corner of the TV screen turns into BLUE.
5) Press the MENU button to exit the menu.
●
LANGUAGE SELECTION
If you want to change the language of the on-screen menu, follow the
procedure below.
1) Connect the power cord to a standard AC outlet.
- TV SET UP Note: If some digits appear in the corner of the
PICTURE
screen, press the POWER button without
CHANNEL SET UP
V-CHIP SET UP
unplugging the power cord.
LANGUAGE
[ENGLISH]
CAPTION
[OFF]
2) Press the POWER button to turn on the TV.
TV SOUND
[MAIN]
BACK LIGHT [BRIGHT]
OPTION
3) Press the MENU button so that the menu display appears on the TV screen.
- TV SET UP 4) Press the CH ▲ or ▼ button to point to
PICTURE
CHANNEL SET UP
"LANGUAGE".
V-CHIP SET UP
LANGUAGE
[ENGLISH]
5) Select [ENGLISH], [ESPAÑOL] or
CAPTION
[OFF]
TV SOUND
[MAIN]
BACK
LIGHT
[BRIGHT]
[FRANÇAIS] by using the VOL + or – button. OPTION
6) Press the MENU button to exit the menu.
CHANNEL PRESETTING
To preset a channel or to change a preset channel, follow the procedure below.
- TV SET UP 1) Press the POWER button to turn on the TV.
PICTURE
CHANNEL SET UP
V-CHIP SET UP
2) Press the MENU button so that the menu
LANGUAGE
[ENGLISH]
CAPTION
[OFF]
display appears on the TV screen.
TV SOUND
[MAIN]
BACK LIGHT [BRIGHT]
3) Press the CH ▲ or ▼ button to point to
OPTION
"CHANNEL SET UP". Then press the VOL +
- CHANNEL SET UP button.
AUTO PRESET CH
4) Press the CH ▲ or ▼ button to point to "AUTO
ADD/DELETE CH (CATV)
PRESET CH". Then press the VOL + button so
that "AUTO PRESET CH" is selected.
The tuner scans and memorizes all active
channels in your area.
OPERATIONS
MTS (Multi-Channel Television Sound) SYSTEM
You can listen to a program in MTS stereo following the steps below.
Menu selection
Type of
broadcast
Regular
MAIN
MONO
-None-
-None-
-None-
Stereo broadcast
STEREO
MONO
STEREO
SAP
MAIN
MAIN
SAP
SAP
To show the status,
press the DISPLAY
button on the
remote control.
SAP: Second Audio Program, which means your program can also be received in a
second language or sometimes a radio station.
[To Select STEREO, MONO or SAP in Stereo broadcast]
1) Press the MENU button so that the menu display appears on the
TV screen.
2) Press the CH ▲ or ▼ button to point to "TV SOUND".
3) Press the VOL + or – button to select your desired stereo mode.
([MAIN], [MONO] or [SAP])
Press
or
4) Press the MENU button to exit the menu.
- TV SET UP PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
[ENGLISH]
CAPTION
[OFF]
TV SOUND
[MAIN]
BACK LIGHT [BRIGHT]
OPTION
- TV SET UP PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
[ENGLISH]
CAPTION
[OFF]
TV SOUND
[MONO]
BACK LIGHT [BRIGHT]
OPTION
- TV SET UP PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
[ENGLISH]
CAPTION
[OFF]
TV SOUND
[SAP]
BACK LIGHT [BRIGHT]
OPTION
RESUME FUNCTION
If the power fails or is disconnected while the TV is powered on,
the TV will turn on automatically when the power resumes.
WATCHING A TV PROGRAM
1) Press the POWER button to turn on the TV.
2) Select the desired channel with the CH ▲ or ▼ button or the
Number buttons.
3) Adjust the volume to the desired listening level using the VOL +
or – button.
4) Adjust picture controls for a natural looking image. (See
"PICTURE ADJUSTMENT".)
USING AUDIO/VIDEO INPUT JACKS
When you use the AUDIO/VIDEO input jacks, select "AV1" or
"AV2" mode by pressing the INPUT button.
● To use the jacks of AV-IN1 on the TV, select "AV1".
● To use the jacks of AV-IN2 on the TV, select "AV2".
Note: When you connect using both VIDEO and S-VIDEO cables
simultaneously, S-VIDEO jack is given priority over the
VIDEO jack.
SETTING THE SLEEP TIMER
Use Sleep Timer to program the TV to shut off in a certain amount
of time.
1) Press the MENU button so that the menu display
Press
or
appears on the TV screen.
2) Press the CH ▲ or ▼
button to point to
- OPTION SET UP - OPTION SET UP "OPTION".
SLEEP
[0]
SLEEP
[30]
NO SIGNAL OFF
[OFF]
NO SIGNAL OFF
[OFF]
Then press the VOL +
NO OPERATION OFF [OFF]
NO OPERATION OFF [OFF]
button.
3) Press the CH ▲ or ▼
button to point to
"SLEEP". Then press
the VOL + button.
- OPTION SET UP - OPTION SET UP SLEEP
[150]
SLEEP
[60]
4) Press the VOL + or –
NO SIGNAL OFF
[OFF]
NO SIGNAL OFF
[OFF]
NO OPERATION OFF [OFF]
NO OPERATION OFF [OFF]
until the correct
amount of time
appears on the TV
screen.
The time increases by 30
- OPTION SET UP - OPTION SET UP minutes. You may set a
SLEEP
[120]
SLEEP
[90]
Sleep Timer of 30, 60, 90,
NO SIGNAL OFF
[OFF]
NO SIGNAL OFF
[OFF]
NO OPERATION OFF [OFF]
NO OPERATION OFF [OFF]
120 or 150 minutes.
[To cancel the Sleep
Timer]
● Press the VOL + or – repeatedly until "SLEEP [0]" is displayed.
Note: When you turn off the TV, disconnect the TV from the AC outlet
or when you have a power failure, the Sleep Timer will be lost.
You can check the remaining minutes on your sleep timer by
pressing the DISPLAY button.
OPERATIONS (Continued)
PICTURE ADJUSTMENT (AV mode, Picture control)
1) Press the MENU button so that the menu display appears Press
on the TV screen.
or
2) Press the VOL + button so that "PICTURE" is selected.
AV mode: Press theVOL + or – button to select from 5 picture options
that will adjust colors to enhance your viewing experience.
RESET [NO]
YES
AV MODE [DYNAMIC (FIXED)]
AV MODE [MOVIE]
AV MODE [DYNAMIC]
Picture control: Picture
control belongs to above
AV mode items in gray
only. Press the CH ▲ or ▼
button to switch Picture
control from each AV mode
and to change the selection
of Picture control, press the
CH ▲ or ▼ button
repeatedly.
Then press the VOL + or –
button to adjust each item.
AV MODE [STANDARD]
AV MODE [GAME]
BRIGHTNESS
-
+
to increase
brightness
to decrease
brightness
+
to increase
contrast
to decrease
contrast
+
to brilliant
to pale
to green
to purple
to clear
to soft
CONTRAST
-
COLOR
-
TINT
-
+
SHARPNESS
-
+
3) Press the MENU button to exit the menu.
Note: In the above steps, the picture adjustment display will disappear
from the TV screen automatically after approximately 5 seconds
if there is no operation. To return the setting again, repeat steps
1) to 2).
BACK LIGHT SELECTION
1) Press the MENU button so that the menu display appears on the
TV screen.
2) Press the CH ▲ or ▼ button to point to "BACK LIGHT".
3) Press the VOL + or – button to select the mode you wish.
4) Press the MENU button to exit the menu.
- TV SET UP -
- TV SET UP -
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
[ENGLISH]
CAPTION
[OFF]
TV SOUND
[MAIN]
BACK LIGHT [BRIGHT]
OPTION
- TV SET UP -
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
[ENGLISH]
CAPTION
[OFF]
TV SOUND
[MAIN]
BACK LIGHT [NORMAL]
OPTION
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
[ENGLISH]
CAPTION
[OFF]
TV SOUND
[MAIN]
BACK LIGHT [DARK]
OPTION
Press
or
[CAPTION MODE]
1) Closed Caption Characters can be displayed on the TV screen only
when the received broadcast signal contains Caption Signals.
2) Paint-on mode:
Displays input characters on the screen immediately.
Pop-on mode:
Once characters are stored in memory, they are displayed all at
once.
Roll-up mode:
Displays the characters continuously by scrolling (max. 4 lines).
Note: If [CAPTION1] or [CAPTION2] is selected but a Closed
Caption signal is not included, characters will not be displayed.
[TEXT MODE]
1) Displays the text on the screen by scrolling (max. 7 lines).
2) If the received broadcast signal does not contain caption or text
signals, no change will occur.
Notes:
1) When your TV receives a special effects playback signal (i.e.,
Search, Slow and Still) from a VCR’s video output channel (CH3
or CH4), your TV may not display the correct caption or text.
2) Captions and texts may not match the TV voice exactly.
3) Interference may cause the closed caption system not to function
properly.
4) The caption or text characters will not be displayed while the menu
display or functions display is shown.
5) If you see this screen:
If your TV displays a black box on the screen, this means that your
TV is set to TEXT mode. To clear screen, select [CAPTION1],
[CAPTION2] or [OFF].
AUTO SHUT OFF FUNCTION
If there is no signal input from the antenna terminal for 5 minutes
or no user operation for 180 minutes, the TV will turn itself off
automatically.
[NO SIGNAL OFF]
1) Press the MENU button so that the menu display appears on the
TV screen.
2) Press the CH ▲ or ▼ button to point to "OPTION".
Then press the VOL + button.
3) Press the CH ▲ or ▼ button to point to "NO SIGNAL OFF".
Then press the VOL + button.
- OPTION SET UP -
- OPTION SET UP -
SLEEP
[0]
NO SIGNAL OFF
[OFF]
NO OPERATION OFF [OFF]
SLEEP
[0]
NO SIGNAL OFF
[ON]
NO OPERATION OFF [OFF]
Press
or
CLOSED CAPTION
[CLOSED CAPTION SELECTION]
This TV can receive Caption and Text. You may view specially
labeled (cc) TV programs, movies, news and prerecorded tapes, etc.
with either a dialogue caption or text display added to the program.
1) Press the MENU button so that the menu display appears on the
TV screen.
2) Press the CH ▲ or ▼ button to point to "CAPTION".
3) Press the VOL + or – button to select the mode you wish.
4) Press the MENU button to exit the menu.
- TV SET UP -
- TV SET UP -
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
[ENGLISH]
CAPTION
[OFF]
TV SOUND
[MAIN]
BACK LIGHT [BRIGHT]
OPTION
- TV SET UP -
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
[ENGLISH]
CAPTION
[CAPTION1]
TV SOUND
[MAIN]
BACK LIGHT [BRIGHT]
OPTION
- TV SET UP PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
[ENGLISH]
CAPTION
[TEXT2]
TV SOUND
[MAIN]
BACK LIGHT [BRIGHT]
OPTION
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
[ENGLISH]
CAPTION
[CAPTION2]
TV SOUND
[MAIN]
BACK LIGHT [BRIGHT]
OPTION
4) Press the VOL + or – button to select the mode you wish.
5) Press the MENU button to exit the menu.
[NO OPERATION OFF]
1) Press the MENU button so that the menu display appears on the
TV screen.
2) Press the CH ▲ or ▼ button to point to "OPTION".
Then press the VOL + button.
3) Press the CH ▲ or ▼ button to point to "NO OPERATION
OFF". Then press the VOL + button.
- OPTION SET UP -
- OPTION SET UP -
SLEEP
[0]
NO SIGNAL OFF
[OFF]
NO OPERATION OFF [OFF]
SLEEP
[0]
NO SIGNAL OFF
[OFF]
NO OPERATION OFF [ON]
Press
- TV SET UP PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
[ENGLISH]
CAPTION
[TEXT1]
TV SOUND
[MAIN]
BACK LIGHT [BRIGHT]
OPTION
Press
or
4) Press the VOL + or – button to select “ON” or “OFF”.
5) Press the MENU button to exit the menu.
or
OPERATIONS (Continued)
V-CHIP enables parents to prevent their children from watching inappropriate material on TV. V-CHIP reads the ratings for programming
(except for news and sports programs, unedited movies on premium
cable channels, and Emergency Broadcast System signals), then
denies access to programming if the program's rating meets or exceeds
the limitations you select. In this case, "PROTECTED PROGRAM by
..." message appears on the TV screen.
To block certain ratings, follow the steps below.
● Programming may be rated by the Motion Picture Association of
America (MPAA) or according to the Television Parental
Guidelines. In order to block any inappropriate programming, set
your limits in both places (MPAA RATING and TV RATING).
● You cannot access the menu when the "PROTECTED PROGRAM
by ..." message appears. In this case, change to an unblocked channel, then press the MENU button.
- TV SET UP [MPAA RATING]
PICTURE
CHANNEL
SET UP
1) Press the MENU button so that the menu disV-CHIP SET UP
LANGUAGE
[ENGLISH]
play appears on the TV screen.
CAPTION
[OFF]
TV SOUND
[MAIN]
BACK LIGHT [BRIGHT]
2) Press the CH ▲ or ▼ button to point to "VOPTION
CHIP SET UP". Then press the VOL + button.
3) Use the Number buttons to enter 4-digit
ACCESS CODE
access code. The default access code is 0000. If
––––
you have not set up your personal access code,
you should use 0000.
4) Press the CH ▲ or ▼ button to point to
- V-CHIP SET UP "MPAA RATING". Then press the VOL +
TV RATING
button.
MPAA RATING
CHANGE CODE
5) Press the CH ▲ or ▼ button to point to your
desired item. Then press the VOL + button to
select [BLOCK] or [VIEW].
<Selection> <Rating Category Explanations>
• G:
• PG:
• PG-13:
• R:
• NC-17:
• X:
General Audience
Parental Guidance suggested.
Unsuitable for children under 13
Restricted; under 17 requires accompanying parent or adult guardian
No one under 17 admitted
Mature audience only
G
PG
PG-13
R
NC-17
X
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
When you select the rating category and set it to [BLOCK], the
higher rating will turn to [BLOCK] automatically. Also, the lower
rating will turn to [VIEW] automatically.
● When you turn "G" to [BLOCK] or [VIEW], the all ratings will
turn to [BLOCK] or [VIEW] automatically.
● When you turn "X" to [VIEW], then all ratings will turn to
[VIEW] automatically.
6) Press the MENU button to exit the menu.
[TV RATING]
1) Press the MENU button so that the menu display appears on the
TV screen.
2) Press the CH ▲ or ▼ button to point to "V-CHIP SET UP". Then
press the VOL + button.
3) Use the Number buttons to enter 4-digit access code. The default
access code is 0000. If you have not set up
ACCESS CODE
your personal access code, you should use
––––
0000.
4) Press the CH ▲ or ▼ button to point to "TV
RATING". Then press the VOL + button.
5) Press the CH ▲ or ▼ button to point to your
- V-CHIP SET UP desired item. Then press the VOL + button to
TV RATING
MPAA RATING
select [BLOCK] or [VIEW].
CHANGE CODE
●
<Selection> <Rating Category Explanations>
• TV-Y:
• TV-Y7:
• TV-G:
• TV-PG:
• TV-14:
• TV-MA:
Appropriate for all children
Appropriate for children 7 and older
General Audience
Parental Guidance suggested.
Unsuitable for children under 14
Mature Audience only
When you select the rating category and set it to [BLOCK], the
higher rating will turn to [BLOCK] automatically. Also, the lower
rating will turn to [VIEW] automatically.
● When you turn "TV-Y" to [BLOCK] or [VIEW], then all ratings
will turn to [BLOCK] or [VIEW] automatically.
● When you turn "TV-MA" to [VIEW], then all ratings will turn to
[VIEW] automatically.
6) Press the MENU button to exit the menu.
●
V-CHIP SET UP
TV-Y
TV-Y7 (
TV-G
TV-PG(
TV-14 (
TV-MA(
)
)
)
)
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[V-CHIP SET UP SUB RATINGS]
When you select TV-Y7, TV-PG, TV-14 or TV-MA and you press the
VOL + button, the sub-ratings will appear on the TV screen.
If you select the rating category (example: TV-PG) and set it to
[BLOCK] or [VIEW], the sub-ratings (example: V for Violence) will
turn to [BLOCK] or [VIEW] automatically.
You can set the sub-ratings to [BLOCK] or [VIEW] individually when
the rating category is set to [BLOCK]. To set the sub-ratings individually, follow the steps below.
TV-Y
[VIEW]
● When you select [TV-Y7]:
TV-Y7 (
) [VIEW]
TV-G
[BLOCK]
TV-PG(DLSV) [BLOCK]
Press the CH ▲ or ▼ button to select "FV"
TV-14 (DLSV) [BLOCK]
(Fantasy Violence). Then press the VOL + but- TV-MA( LSV) [BLOCK]
ton to select [BLOCK] or [VIEW].
● When you select [TV-PG], [TV-14] or [TVMA]:
TV-Y7
[BLOCK]
Press the CH ▲ or ▼ button to select "D"
FV
[BLOCK]
(Suggestive Dialog), "L"(Coarse Language),
"S"(Sexual Situation) or "V" (Violence). Then
press the VOL + button to select [BLOCK] or
TV-PG
[BLOCK]
[VIEW].
D
[BLOCK]
Note: When you select [TV-MA], "D" does not
L
[BLOCK]
S
[BLOCK]
appear on the TV screen.
V
[BLOCK]
● The sub-ratings which set to [BLOCK] appear
next to the rating category in the "TV RATING"
menu.
● Press the MENU button to exit the menu.
[CHANGE CODE]
To change access code, follow steps.
- TV SET UP 1) Press the MENU button, then press the CH ▲
or ▼ button to select "V-CHIP SET UP". Press PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE
[ENGLISH]
the VOL + button to continue.
CAPTION
[OFF]
TV SOUND
[MAIN]
2) Press the Number buttons to enter your old
BACK LIGHT [BRIGHT]
OPTION
access code. If you have never set up your personal access code, use 0000.
ACCESS CODE
3) Press the CH ▲ or ▼ button to select
––––
"CHANGE CODE". Then press the VOL +
button to continue.
4) Use the Number buttons to enter your
desired access code in the NEW CODE space.
- V-CHIP SET UP TV RATING
Then enter the same code in the CONFIRM
MPAA RATING
CHANGE CODE
CODE space. Your new access code is set.
You will return to the "V-CHIP SET UP".
If the code in the CONFIRM CODE space does
not match the code in the NEW CODE space,
NEW CODE
repeat step 4, making sure you enter the same
––––
new code exactly in the CONFIRM CODE space.
CONFIRM CODE
Notes:
––––
● If a power failure occurs for more than 10 seconds, the default code, 0000, will be the active
access code again.
● If you connect the power cord to an AC outlet that is controlled by
a tap switch, your personal access code will be erased every time
you turn off the power at the tap switch for more than 10 seconds.
The default code will be the active code again.
[IF YOU FORGET YOUR ACCESS CODE]
You should reset the access code to default code, 0000. To reset 0000
as your personal access code, unplug the TV’s power cord for more
than 10 seconds, then plug it in again.
TROUBLESHOOTING GUIDE
Black or Luminous point on Screen.
Different color marks on screen.
No Picture or Sound.
Picture OK, Sound Poor.
Sound OK, Picture Poor.
Picture Blurred.
Ghosts in picture.
Lines or Streaks in Picture.
Weak Picture.
Poor Reception on Some Channels.
No Color.
Picture Rolls Vertically.
Picture Distorted.
Bars On Screen.
POSSIBLE REMEDY
Remote Control Doesn’t Work.
QUICK SERVICE CHECK LIST
PROBLEM
Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. Before arranging for
service, check these items. It could save your time and money.
Try a new channel, if OK, then possible station trouble.
Is TV plugged in?
Power at outlet?
Is TV’s POWER button on?
Is antenna connected to terminal on the back of the set?
If outside antenna is being used, check for broken wire.
Check for local interference.
Turn off with POWER button and then turn it on after about a minute.
Adjust COLOR control.
Adjust CONTRAST & BRIGHT control.
Check batteries in Remote Control.
Move the TV away from the nearby appliances which have Magnetism.
Turn off using the POWER button, then turn it on again 30 minutes or so later.
Temperature around is too low.
Life of the Back Light is approximately 50,000 hours. Ask the Service Center to replace.
It is quality of the LCD Panel.
Closed Caption Problem
Possible Remedy
My TV is showing captions that are misspelled.
You are watching a live broadcast and spelling errors made by the closed captioning production
company may pass through uncorrected. A prerecorded program will not show any misspelled
words because of the normal time available for editing the captions.
My TV will not show the text in its entirety or there is a delay
of what is being said.
Captions that are delayed a few seconds behind the actual dialogue are common for live broadcasts. Most captioning production companies can display a dialogue to a maximum of 220 words
per minute. If a dialogue exceeds that rate, selective editing is used to insure that the captions
remain up-to-date with the current TV screen dialogue.
My captions are scrambled with white boxes on the TV screen. Interference caused by building, power lines, thunderstorms, etc. may cause scrambled or incomplete captions to appear.
My program guide listed a TV show as being closed captioned Broadcasters may at times use a time compression process to the actual program so that additional advertising time can be given. Since the decoder cannot read the compressed information, capbut none of the captions were displayed.
tions will be lost.
My prerecorded videotape does not show any captions.
The tape box mentions it being closed captioned.
The videotape was either an illegal copying or the tape duplicating company accidentally left out
the captioning signals during the copying process.
My TV screen shows a black box on certain channels.
You are in the TEXT mode. Select CAPTION mode or CAPTION [OFF].
The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a tiny spec of color.
This in not to be considered a defect in the LCD screen.
MAINTENANCE
CABINET CLEANING
●
●
Wipe the front panel and other exterior surfaces of the TV with a
soft cloth immersed in lukewarm water and wrung dry.
Never use a solvent or alcohol. Do not spray insecticide liquid
near the TV. Such chemicals may cause damage and discoloration to the exposed surfaces.
PICTURE SCREEN CLEANING
If the LCD panel should require cleaning, wipe it with a cotton or
soft cloth. Before cleaning the picture screen, disconnect the power
cord.
DIMENSIONAL DRAWINGS
Unit : inch (mm)
LC-13AV4U
315 16 (100)
3 5 32 (80)
6 11 32 (161)
18˚
(187.5)
1 3 10 (33)
3 15 16 (100)
7
3
8
12 7 10 (322.5)
7 29 32 (201)
8 3 5 (218.5)
12 6164 (329)
10 49 64 (273.3)
12 21 64 (313)
10 33 64 (267)
1
12 63 64 (330)
3 47 64 (95)
8
( 3)
Unit : inch (mm)
LC-15AV4U / LC-20AV4U
122364 / 1515 32 (314 / 393)
136364 / 17 9 32 (355 / 439)
12 3 32 / 1529 32 (307 / 404)
131 32 (50)
315 16 (100)
3 3 16 / 3 37 64 (81 / 91)
9 332 / 1127 32 (231 / 301)
2 / 2 63 64 (51 / 76)
315 16 (100)
9 1 64 (229)
137 64 / 113 16 (40 / 46)
461 64 / 525 64 (126 / 137)
1015 64 / 12 3 5 (260 / 320)
9 3 8 / 1127 64 (238 / 290)
1837 64 / 23 5 8 (472 / 600)
SPECIFICATIONS
GENERAL SPECIFICATIONS
Television system:
NTSC-M
TV Standard
Closed Caption System: §15.119/FCC
Channel coverage
VHF:
2 ~ 13
UHF:
14 ~ 69
CATV:
2 ~ 13, A ~ W,
W+1 ~ W+84,
A-5 ~ A-1, 5A
Tuning System:
181 channel frequency synthesized tuning system
Channel access:
Direct access keyboard, programmable scan and
up/down
Terminals
Antenna input:
VHF/UHF/CATV 75 ohm unbalanced (F-type)
S-Video input:
Mini DIN 4-pin jack
Video input:
RCA connector x 1
Audio input:
RCA connector x 4
Component Video input: One pin jack (Y), 1Vpp (75 ohm)
Two pin jacks (PR)/(PB), 700mVpp (75 ohm)
Headphone:
1/8" stereo (3.5 mm)
Stereo Sound System
2 speakers
2 ways AV input
Sound output:
1W, 8 ohm x 2
Remote control:
Digital encoded infrared light system
Power requirements:
AC120V, 60Hz
[LC-13AV4U]
Power consumption (Maximum):
LCD:
Dimensions (H x W x D):
(including the table stand)
Weight (including the table stand):
[LC-15AV4U]
Power consumption (Maximum):
LCD:
Dimensions (H x W x D):
(including the table stand)
Weight (including the table stand):
[LC-20AV4U]
Power consumption (Maximum):
LCD:
Dimensions (H x W x D):
(including the table stand)
Weight (including the table stand):
56W
13"
12-15/16" x 13" x 3-3/4"
(329mm x 330mm x 95mm)
7.1 lbs. (3.2kg)
65W
15"
14" x 18-9/16" x 10-1/4"
(355mm x 472mm x 260mm)
9.7 lbs. (4.4kg)
73W
20"
17-5/16" x 23-5/8" x 12-5/8"
(439mm x 600mm x 320mm)
15.0 lbs. (6.8kg)
• Designs and specifications are subject to change without notice
and without our legal obligation.
• If there is a discrepancy between languages, the default language will be English.
• Please also read the limited warranties for both the U.S. and
Canada located on the back of this operation manual.
CONSUMER LIMITED WARRANTY
(Valid for warranty service in the U.S. only)
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the
“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will,
at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at
no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor
to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other
misuse, abnormal service or handling, or which has been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof
of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL
IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED
TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long
an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described
herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive
remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall
constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall
constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp
be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted
repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any
incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential
damages, so the above exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM
STATE TO STATE.
Model Specific Section
Your Product Model Number & Description:
LC-13AV4U LCD Color Television
LC-15AV4U LCD Color Television
LC-20AV4U LCD Color Television
(Be sure to have this information available when you need service for
your Product.)
Warranty Period for this Product:
One (1) year parts and ninety (90) days labor from the date of purchase.
Additional Item(s) Excluded from
Warranty Coverage (if any):
Non-rechargeable batteries.
Where to Obtain Service:
Call Sharp Electronics corporation toll free at 1-800-BE-SHARP for
instructions on how to obtain service on your LCD TV.
What to do to Obtain Service:
Ship your product, prepaid, as per the instruction given by the Sharp
representative at the toll free number (1-800-BE-SHARP). BE sure to
have your proof of purchace available. Be sure to ship the product
securely packaged and insured against shipping damage.
TO OBTAIN PRODUCT INFORMATION, CALL 1-800-BE-SHARP OR VISIT www.sharpusa.com
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION
VALID IN CANADA ONLY
LIMITED WARRANTY
Consumer Electronics Products
Congratulations on your purchase!
Sharp Electronics of Canada Ltd. (hereinafter called “Sharp”) gives the following express warranty to the first consumer
purchaser for this Sharp brand product, when shipped in its original container and sold or distributed in Canada by Sharp or
by an Authorized Sharp Dealer:
Sharp warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship.
If any such defects should be found in this product within the applicable warranty period, Sharp shall, at its option, repair or
replace the product as specified herein.
This warranty shall not apply to:
(a) Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper installation or
inappropriate use as outlined in the owner’s manual.
(b) Any Sharp product tampered with, modified, adjusted or repaired by any party other than Sharp, Sharp’s Authorized
Service Centres or Sharp’s Authorized Servicing Dealers.
(c) Damage caused or repairs required as a result of the use with items not specified or approved by Sharp, including but
not limited to head cleaning tapes and chemical cleaning agents.
(d) Any replacement of accessories, glassware, consumable or peripheral items required through normal use of the product
including but not limited to earphones, remote controls, AC adapters, batteries, temperature probe, stylus, trays, filters,
belts, ribbons, cables and paper.
(e) Any cosmetic damage to the surface or exterior that has been defaced or caused by normal wear and tear.
(f) Any damage caused by external or environmental conditions, including but not limited to transmission line/power line
voltage or liquid spillage.
(g) Any product received without appropriate model, serial number and CSA/cUL markings.
(h) Any products used for rental or commercial purposes.
(i) Any installation, setup and/or programming charges.
Should this Sharp product fail to operate during the warranty period, warranty service may be obtained upon delivery of the
Sharp product together with proof of purchase and a copy of this LIMITED WARRANTY statement to an Authorized Sharp
Service Centre or an Authorized Sharp Servicing Dealer. In home warranty service may be provided at Sharp’s discretion on
any Sharp television with the screen size of 27” or larger and on any Sharp Over-the-Range Microwave Oven.
This warranty constitutes the entire express warranty granted by Sharp and no other dealer, service centre or their agent or
employee is authorized to extend, enlarge or transfer this warranty on behalf of Sharp. To the extent the law permits, Sharp
disclaims any and all liability for direct or indirect damages or losses or for any incidental, special or consequential damages
or loss of profits resulting from a defect in material or workmanship relating to the product, including damages for the loss of
time or use of this Sharp product or the loss of information. The purchaser will be responsible for any removal, reinstallation,
transportation and insurance costs incurred. Correction of defects, in the manner and period of time described herein,
constitute complete fulfillment of all obligations and responsibilities of Sharp to the purchaser with respect to the product and
shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.
WARRANTY PERIODS:
Audio Products
Camcorder
DVD Products
Projector
LCD & Plasma Display TV
Microwave Oven
Television Products
VCR Products
Vacuum Cleaner
Parts &
1 year
1 year
1 year
1 year
1 year
1 year
1 year
1 year
1 year
Labour (exceptions noted)
(lamp 90 days)
(magnetron component-4 additional years)
(picture tube component-1 additional year)
To obtain the name and address of the nearest Authorized Sharp Service Centre or Dealer, please contact:
SHARP ELECTRONICS OF CANADA LTD. 335 Britannia Road East, Mississauga, Ontario L4Z 1W9
OU
THR
For more information on this Warranty, Sharp Extended Warranty
Offers, Sharp Canada Products, Accessory Sales, Dealer or Service
Locations, please call (905) 568-7140
Visit our Web site: www.sharp.ca
BE THE BES
SERVICE
G
H
T
FA
CT
ION
TO
CU
IS
AT
STO
MER S
Download PDF

advertising