FCD302MP018A02COT

FCD302MP018A02COT
MAKING MODERN LIVING POSSIBLE
VLT® Decentral Drive FCD 302
The VLT® Decentral Drive FCD 302 is the new generation of the VLT® Decentral FCD 300, based on the
VLT® AutomationDrive FC 302 platform. It combines the key features of both products in a completely
re-designed enclosure, made for best fit on direct machine mounting.
Produktfoto
Simplicity and robustness have been
taken into consideration during the
design of the new VLT® Decentral
Drive FCD 302, resulting in a real
user-friendly product, with high
performance and the highest protection degree.
Decentral drives are meant for
de-located mounting, where the need
for space-consuming control cabinets
is eliminated. With the drives placed
near – or directly on – the motor,
there is no need for long screened
motor cables.
Perfect
match for:
• Conveyor applications
• Installation in wash-down
areas
• Widely distributed
applications, with large
number of drives
One-box concept
All options are built as part of the
unit, reducing the number of boxes
to be mounted, connections and
terminations in the installation.
Consequently labor costs in mounting
hours and risk of failures are dramatically reduced.
Power range:
0.37 – 3 kW, 3 x 380 – 480 V
Enclosure:
• IP66 standard black
• IP66 standard white
• IP69K hygienic white
(all enclosures are rated as Type 4X)
Features
Benefits
Reliable
Maximum up time
Special painting treatment and
smooth surface
Easy cleaning; no dirt trap
Pluggable twin-part design
(installation box and electronic part)
Easy and fast service
Integrated lockable service switch available
Local disconnection possible
User friendly
Save commissioning and operation cost
Adapts to any brand of motor and
geared motor, induction as well as
permanent magnet motors
Easy and flexible installation
Integrated power and fieldbus
looping terminals
Cable savings
Visible LEDs
Quick status check
Set-up and controlled through pluggable
control panel, fieldbus communication
and MCT10 PC software
Easy commissioning
Awarded control panel with on-board manual
Easy operation
Screwless spring-loaded terminals
Easy and fast connection
Integrated USB port
Direct connection to PC
Intelligent
Built-in feature
Smart Logic Control
Safe Stop, STO: Safe Torque Off
Reduces need for PLC capacity
Reduces the need for extra components
Intelligent warning systems
Warning before controlled stop
Facts about our products
Integrated 24V supply
24 V DC control supply is provided by
the drive. Separate supply terminals
have been made for remote I/Os
distribution.
Power looping
The new FCD 302 facilitates internal
power looping. Terminals for 6 mm2
power cable inside the enclosure
allows connection of multiple units
in the same branch.
Mains supply (L1, L2, L3)
Supply voltage
Supply frequency
True Power Factor (λ)
Displacement Power Factor (cos ф)
Switching on input supply
380 – 480 V ±10%
50/60 Hz
0.92 nominal at rated load
(>0.98)
2 times/min.
Output data (U, V, W)
Ethernet switch
Two RJ-45 ports are available in the
drive for easy daisy chaining of
Ethernet communication.
Output voltage
0 – 100% of supply
Output frequency
0 – 1000 Hz
0 – 300 Hz (Flux mode)
Switching on output
Ramp times
Unlimited
0.01 – 3600 sec.
Digital inputs
Programmable digital inputs
4 (6)
Logic
PNP or NPN
Voltage level
0 – 24 V DC
Note: One/two digital inputs can be programmed as digital output
Fieldbus options
• PROFIBUS DP
• PROFINET
• EtherNet/IP
Analogue inputs
Number of analogue inputs
Modes
Voltage level
Current level
Application options
• Encoder
• Resolver
• Functional Safety
2
Voltage or current
-10 to +10 V (scaleable)
0/4 – 20 mA (scaleable)
Pulse/encoder inputs
Programmable pulse/encoder inputs
Voltage level
Hardware options
•
•
•
•
•
•
•
Specifications
2
0 – 24 V DC (PNP positive logic)
Digital output
Mounting brackets
Service switch
Internal circuit breaker
M12 sensor plugs
24 V DC input for control supply
Brake chopper
Electromechanical brake control
and supply
Programmable digital/pulse outputs
Voltage level at digital/frequency output
2
0 – 24 V
Analogue output
Programmable analogue outputs
Current range
1
0/4 – 20 mA
Relay outputs
Programmable relay outputs
2
Integrated 24 V supply
Max. load
600 mA
Dimensions
Small frame size (0.37 – 2.2 kW)
331.5
280
80
178
190
80
175
200
Ø13
25
315
41
6.5
349.5
All measurements are in mm
MP018A02
VLT® is a trademark of Danfoss A/S
Produced by PE-MMSC 2010.09
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising