AVS . 4.14.14007/CC-08 Issuing Center: ANTWERP Page 1/2 VERITAS CERTIFICATE OF CONFORMITY To photometry and colorimetry specifications of: ICAO Annex 14 - Sixth Edition - July 20 13 (Standards and recommended practices) Technical Specification IEC 61827 AENA specification DIN/DSEYN/PPT/011 Transport Canada TP 312 Aerodrome Standa rd s and recommended practices Manual of Standards Part 139 - Aerodromes - Australia To FAA AC 150/5345-46 (Current Edition) L-850D(L) and Engineering Brief No. 67 IREL- XXXOXXX - Red light · Product: Manufactured by ADB LLC in Columbus OH/USA Applications : Runway End Inset Light Th is product has been upon request of ADB Leuvensesteenweg, 585 B - 1930 ZAVENTEM - BELGIUM tested and found in comp liance with the photometry and colorimetry specifications of : • the catalogue sheet 3035 • the ICAO - Annex 14 - Volume I - §5.3. 11 for light output requirements • the IEC TS 61827 • the AENA Specification DIN/DSEYN/PPT/01 1 • th e Transport Canada TP 312 • Manual of Standards Part 139 - Aerodromes - Australia - Date of inspection: Septembre 5th., 2014 Mr Rudi Vandenbe Inspector Indust ~ER ITAS AN 1,23 Particulars of inspection: detailed hereafter This certificate is only va lid for a period of 5 years from th e issuance date, as f ar as no changes of production process, equipment characteristi cs nor of appl icab le req uirem ents occur during this period of va lid ity. AVS.4.14.14007/CC -08 Issuing Center: ANTWERP Page 2/2 VERITAS The following survey operations have been carried out without noticeable remarks: • ICAO: o Attendance to tests at the Laboratory premises of the manufacturer: • Examination of test equipment • Checking of installation of units before testing • Attendance to photometric tests per applicable procedures and method Attendance to the colorimetric tests per applicable procedure & method o Photometry per ICAO Annex 14 - Vol. 1 - 6th edition - per Append ix 2 - Fig. A28 Runway End (Red) o Colorimetry per ICAO Annex 14 - Vol. 1 - 6th ed ition - Appendix 1 Fig. A1- 1. • FAA: Review of both Test Verification of Conformity No. 113A0673 to ICAO issued by Intertek and Certificate of Conformity to FAA with the supporting test reports Nos.1 00853896CRT-001- 100853896MIN-024 CONCLUSION Taking into account the satisfactory results of actual tests and examinations we confirm that the manufacturing and the test results for the above specified units are in conformity with applicable standards, specifications and data sheets. ENCLOSURE • Records of tests which have been attended, duly stamped for identification by BUREAU VERITAS: Records of photometric and colorimetric test results (witnessed & reviewed) Issued at Antwerp, Septembre 5th., 2014 4f!f3 ~v-.IJ v£~/)o Mr Rudi Vandenbem .:) Inspector Industry ~"ECTO" 414.NnveR? ?III BUREAU VERITAS AN This certificate is only valid for a period of 5 years from the issuance date, as far as no changes of production process, equipment characteristics nor of applicable requirements occur durin g this period of validity.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project