Toshiba XDE600KU Operating Instructions Manual user guide

Toshiba XDE600KU Operating Instructions Manual user guide
Introduction
2
Connections
11
Basic playback
16
Advanced playback
19
Function setup
30
Others
36
DIGITAL VIDEO
Upconverting 1080p
Extended Detail DVD Player
XDE600KU
OWNER’S MANUAL
Owner’s Record
The model number and serial number are on the back of
your DVD Player. Record these numbers in the spaces
below. Refer to these numbers whenever you communicate
with your Toshiba dealer about this DVD Player.
Model number:
Serial number:
© 2009 Toshiba Corporation
Downloaded From Disc-Player.com Toshiba Manuals
Introduction
SAFETY PRECAUTIONS
CAUTION: VISIBLE LASER RADIATION WHEN
OPEN. DO NOT STARE INTO BEAM.
AVIS
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with an arrowhead symbol, within the
equilateral triangle, is intended to alert the user to the presence
of uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within the equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in this
owner’s manual.
The symbol for Class
(Double lnsulation)
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN
THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF AC POWER OUTLET,
THEN FULLY INSERT.
WARNING:
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquid, such as vases,
shall be placed on the apparatus.
CAUTION:
This Digital Video Disc Player employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference.
Should the unit require maintenance, contact an authorized service location.
Use of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure.
Visible and invisible laser radiation when open and interlocks defeated.
DO NOT STARE INTO BEAM.
FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING:
Changes or modifications to this unit not expressly approved by Toshiba, or parties authorized by Toshiba,
could void the user’s authority to operate the equipment.
Warnings:
• The main plug is used as disconnect device and it should remain readily operable during intended used. In
order to disconnect the apparatus from the mains completely, the main plug should be disconnected from
the mains socket outlet completely.
• Minimum 10 cm (4 inches) distances around the apparatus for sufficient ventilations.
• The ventilation should not be impeded by covering the ventilation openings with items such as newspaper,
table-cloths, curtains, etc.
• No naked flame sources such as lighted candles should be placed on the apparatus.
• The use of apparatus in moderate climates.
CLASS 1
LASER PRODUCT
2
Downloaded From Disc-Player.com Toshiba Manuals
IMPORTANT SAFETY INSTRUCTIONS
9.
10.
11.
12.
13.
14.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Portable Cart Warning
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,
such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Introduction
1.
2.
3.
4.
5.
6.
7.
8.
ADDITIONAL SAFETY INSTRUCTIONS
15. Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire or electric
shock.
16. Never expose the apparatus to dripping or splashing or place items such as vases, aquariums, any other item filled with
liquid, or candles on top of the unit.
17. Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury.
18. Do not place anything on top of this unit.
19. Do not place the apparatus on amplifiers or equipment that may produce heat.
20. Never block or cover the slots or openings in the unit.
Never place the unit:
• on a bed, sofa, rug or similar surface;
• too close to drapes, curtains, or walls; or
• in a confined space such as a bookcase, built-in cabinet, or any other place with poor ventilation.
The slots and openings are provided to protect the unit from overheating and to help maintain reliable operation.
21. Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and
apparatus malfunction.
22. If the apparatus should emit smoke or an unusual odor, immediately disconnect the power cord from the wall outlet. Wait
until the smoke or smell stops, then ask your dealer for a check and repair. Neglecting to do so may cause fire.
23. During thunderstorms, do not touch the connecting cables or the apparatus.
24. Warning: To prevent spread of fire, keep candles or other open flames away from this product at all times.
Location of the required label
The rating plate and the safety caution
are on the rear of the unit.
3
Downloaded From Disc-Player.com Toshiba Manuals
Introduction
Precautions
Notes on handling
When shipping the DVD player, the original shipping
carton and packing materials come in handy. For
maximum protection, repack the unit as it was originally
packed at the factory. Take care not to give it a shock or
shake when carrying.
Do not use volatile liquids, such as insect spray, near
the DVD player. Do not leave rubber or plastic products
in contact with the DVD player for a long time. They will
leave marks on the finish.
The top and rear panels of the DVD player may
become warm after a long period of use. This is not a
malfunction.
When the DVD player is not in use, be sure to remove
the disc and turn off the power.
If you do not use the DVD player for a long period, the
unit may not function properly in the future. Turn on and
use the DVD player occasionally.
Notes on locating
Place the DVD player on a level surface. Do not use it on
a shaky or unstable surface such as a wobbling table or
inclined stand. The loaded disc may come off the proper
position and cause damage to the DVD player.
When you place this DVD player near a TV, radio, or
VCR, the playback picture may become poor and the
sound may be distorted. In this case, place the DVD
player away from the TV, radio, or VCR.
Notes on moisture condensation
Moisture condensation damages the DVD player.
Please read the following carefully.
Moisture condensation occurs, for example, when you pour
a cold drink into a glass on a warm day. Drops of water form
on the outside of the glass. In the same way, moisture may
condense on the optical pick-up lens inside this unit, one
of the most crucial internal parts of the DVD player.
Moisture condensation occurs during the following
cases.
When you bring the DVD player directly from a cold
place to a warm place.
When you use the DVD player in a room where you just
turned on the heater, or a place where the cold wind
from the air conditioner directly hits the unit.
In summer, when you use the DVD player in a hot and
humid place just after you move the unit from an air
conditioned room.
When you use the DVD player in a humid place.
Notes on cleaning
Use a soft, dry cloth for cleaning.
For stubborn dirt, soak the cloth in a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe it
dry.
Do not use any type of solvent, such as thinners and
benzene, as they may damage the surface of the DVD
player.
If you use a chemical saturated cloth to clean the unit,
follow that product’s instructions.
Inspection and Maintenance
This DVD player is a high technology, precision device.
If the optical pick-up lens and disc drive parts become
dirty or worn down, the picture quality may be reduced.
To avoid reduction in picture quality, it is recommended
that regular inspection and maintenance (cleaning or
parts replacement) be performed every 1,000 hours of
use. For further details, contact your nearest consumer
electronics dealer.
4
Downloaded From Disc-Player.com Toshiba Manuals
Do not use the DVD player when moisture
condensation may occur.
If you use the DVD player in such a situation, it may
damage discs and internal parts. Remove the disc,
connect the power cord of the DVD player to the wall
outlet, turn on the DVD player, and leave it for two or
three hours. After two or three hours, the DVD player will
have warmed up and evaporated any moisture. Keep the
DVD player connected to the wall outlet and moisture
condensation will seldom occur.
Notes on Discs
On handling discs
Structure of disc contents
Normally, DVDs are divided into titles, and the titles are
sub-divided into chapters. VIDEO CDs and audio CDs are
divided into tracks.
Introduction
Do not touch the playback side of the disc.
DVD
DVD
Title 1
Chapter 1
Title 2
Chapter 2
Chapter 1
Chapter 2
Chapter 3
Playback side
Do not attach paper or tape to discs.
VIDEO CD/audio CD
VIDEO CD/audio CD
Track 1
Track 2
Track 3
Track 4
Track 5
On cleaning discs
Fingerprints and dust on the disc cause picture and
sound deterioration. Wipe the disc from the center
outwards with a soft cloth. Always keep the disc clean.
Each title, chapter or track is assigned a number, which is
called “title number”, “chapter number” or “track number”
respectively.
There may be discs that do not have these numbers.
On storing discs
If you cannot wipe off the dust with a soft cloth, wipe
the disc lightly with a slightly moistened soft cloth and
finish with a dry cloth.
Do not use any type of solvent such as thinner, benzine,
commercially available cleaners or antistatic spray for
vinyl LPs. It may damage the disc.
Do not store discs in a place subject to direct sunlight
or near heat sources.
Do not store discs in places subject to moisture and
dust such as a bathroom or near a humidifier.
Store discs vertically in a case. Stacking or placing
objects on discs outside of their case may cause
warping.
Notes on patent portfolio license
Notes on copyright
The unauthorized recording, use, distribution, or revision
of copyrighted materials including, without limitation,
television programs, videotapes, and DVDs, is prohibited
under the Copyright Laws of the United States and other
countries, and may subject you to civil and criminal
liability.
This product incorporates copyright protection technology
that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized
by Macrovision Corporation, and is intended for home and
other limited viewing uses only unless otherwise authorized
by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Mpeg-4 Visual and Mpeg layer 3
THIS PRODUCT IS LICENSED UNDER THE MPEG-4
VISUAL PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NON-COMMERCIAL USE OF A
CONSUMER FOR ()ENCODING VIDEO IN COMPLIANCE
WITH THE MPEG-4 VISUAL STANDARD (“MPEG-4
VIDEO”) AND/OR ()DECODING MPEG-4 VIDEO THAT
WAS ENCODED BY A CONSUMER ENGAGED IN
A PERSONAL AND NON-COMMERCIAL ACTIVITY
AND/OR WAS OBTAINED FROM A VIDEO PROVIDER
LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO.
NO LICENSE IS GRANTED OR SHALL BE IMPLIED
FOR ANY OTHER USE. ADDITIONAL INFORMATION
INCLUDING THAT RELATING TO PROMOTIONAL,
INTERNAL AND COMMERCIAL USES AND LICENSING
MAY BE OBTAINED FROM MPEG LA,L.L.C. SEE HTTP://
WWW.MPEGLA.COM
MPEG Layer-3 audio coding technology licensed from
Fraunhofer LLS and Thomson.
5
Downloaded From Disc-Player.com Toshiba Manuals
Introduction
Notes on Discs (continued)
About this owner’s manual
This owner’s manual explains the basic instructions of
this DVD player. Some DVDs are produced in a manner
that allows specific or limited operation during playback.
As such, the DVD player may not respond to all operating
commands. This is not a defect in the DVD player. Refer
to instruction notes of discs.
” may appear on the TV screen during operation.
“
” means that the operation is not permitted by the
A“
DVD player or the disc.
Playable discs
This DVD player can play the following discs.
Disc Mark
Contents
Disc
Size
Approx. 4 hours
(single sided disc)
Audio
+
video
(moving
pictures)
DVDs
12 cm
Approx. 8 hours
(double sided disc)
Approx. 80 minutes
(single sided disc)
8 cm
About
The
icons on the heading bar show the
playable discs for the function described under that heading.
DVD : You can use this function with DVD discs.
: You can use this function with Video CDs.
CD : You can use this function with Audio CDs/CD-R/RW
CDs.
Notes on region numbers
The region number of this DVD player is 1. If region
numbers, which stand for their playable area, are printed
or
, disc playback
on your DVD and you do not find
will not be allowed by the player. (In this case, the DVD
player will display a message on-screen).
VIDEO
CDs
DIGITAL VIDEO
Audio
CDs
SUPER
VIDEO
CDs
On VIDEO CDs
This DVD player supports VIDEO CDs equipped with the
PBC (Version 2.0) function. (PBC is the abbreviation of
Playback Control.) You can enjoy two playback variations
depending on types of discs.
• VIDEO CD not equipped with PBC function (Version
1.1)
Sound and movie can be played on this DVD player in
the same way as an audio CD.
• VIDEO CD equipped with PBC function (Version
2.0)
In addition to operation of a VIDEO CD not equipped with
the PBC function, you can enjoy playback of interactive
software with search function by using the menu
displayed on the TV screen (Menu Playback). Some of
the functions described in this owner’s manual may not
work with some discs.
6
Downloaded From Disc-Player.com Toshiba Manuals
Maximum
playback time
DivX®
Audio
+
video
(moving
pictures)
12 cm
Approx. 74 minutes
8 cm
Approx. 20 minutes
12 cm
Approx. 74 minutes
8 cm
(CD
single)
Approx. 20 minutes
Audio
+
video
(moving
pictures)
12 cm
35 min.
8 cm
10 min.
Audio
+
video
(moving
pictures)
12 cm
Audio
SUPER VIDEO
Approx. 160 minutes
(double sided disc)
8 cm
It depends on DivX®
quality
The following discs are also available.
DVD±R/±RW and DVD-ROM discs of DVD format
CD-R/CD-RW discs of CD-DA, Video CD, MP3, WMA or
JPEG format
Official DivX® Certified product
Plays all versions of DivX® video (including DivX® 6)
with standard playback of DivX® media files
Some of these discs may be incompatible.
• You cannot play discs other than those listed above.
• You cannot play DVD-RAM discs or non-standardized discs,
etc., even if they may be labeled as above.
• This DVD player uses the NTSC color system, and cannot
play DVDs recorded in any other color system (PAL, SECAM,
etc.).
Because of problems and errors that can occur during the
creation of DVD and CD software and/or the manufacture
of DVD and CD discs, Toshiba cannot assure that this DVD
player will successfully play every disc bearing the DVD and
CD logos. If you happen to experience any difficulty playing
a DVD and/or CD disc on this DVD player, please contact
Toshiba Customer Service.
is a trademark of DVD Format/Logo Licensing
Corporation.
Table of Contents
Introduction
Advanced playback
2
3
4
5
Accessing a Specific Location Directly ....... 19
Locating a specific title/chapter/time ...................19
Repeating a Specific Segment.................. 20
Repeating a specific segment .............................20
Notes on region numbers ................................... 6
Playing in a Varied Order .......................... 20
Table of Contents ...................................... 7
Identification of Controls ......................... 8
Playing titles, chapters or tracks in a varied
order ...................................................................20
Front panel ...........................................................8
Rear panel ...........................................................8
DVD display ........................................................8
Remote control ....................................................9
Loading batteries ...............................................10
Operating with the remote control ......................10
Connections
Connecting to a TV ................................... 11
Connecting to a TV ............................................ 11
Connecting to a TV (Using the component video
jacks).................................................................. 11
Connecting to a display (Using a HDMITM cable) .......12
Playing in a Favorite Order ....................... 21
Setting titles, chapters or tracks in a favorite
order ...................................................................21
Zooming a Picture...................................... 22
Zooming a picture ...............................................22
Selecting the Sound Enhancement
(E.A.M.)........................................................ 22
Selecting the sound enhancement .....................22
Selecting the Picture Mode ....................... 23
Selecting the picture mode .................................23
Selecting Subtitles ..................................... 23
Selecting a subtitle language ..............................23
Selecting the Camera Angle ..................... 24
Connecting to Optional Equipment ........ 13
Changing the camera angle ................................24
Connecting to an amplifier equipped with a
Dolby® Digital decoder .................................... 14
Connecting to an amplifier equipped with
Dolby Surround Pro Logic ................................ 14
Connecting to an amplifier equipped with a
DTS® decoder ................................................... 15
Connecting to an amplifier equipped with an
MPEG2 audio decoder ..................................... 15
Connecting to an amplifier equipped with a
digital audio input .............................................. 15
Selecting a Language ................................ 24
Basic playback
Playing a Disc ........................................... 16
Selecting a playback audio setting ......................24
On-screen Display Operation ................... 25
On-screen display operation ...............................25
Playing MP3/WMA Files ............................. 26
Playing MP3/WMA files.......................................26
Viewing JPEG Files.................................... 27
Viewing JPEG files..............................................27
Viewing a thumbnail view....................................27
Playing DivX®, MPEG-4 Files .................... 28
Playing DivX®, MPEG-4 files ..............................28
Basic playback .................................................. 16
Playing USB Device ................................... 29
Variable Speed Playback ......................... 17
Connecting to USB flash drive ............................29
Playing in fast reverse or fast forward
directions .......................................................... 17
Playing frame by frame ..................................... 17
Playing in slow-motion ...................................... 17
Resuming playback from the same location ..... 17
Locating a Desired Section ..................... 18
Locating a title using the top menu ....................18
Locating a specific chapter or track .................. 18
Introduction
SAFETY PRECAUTIONS ...........................
IMPORTANT SAFETY INSTRUCTIONS ....
Precautions ...............................................
Notes on Discs ..........................................
Function setup
Customizing the Function Settings.......... 30
Setting procedure ...............................................30
Setting details .....................................................30
Others
Table of Languages.................................... 36
Before Calling Service Personnel............. 37
Specifications............................................. 38
Limited Warranty ........................................ 39
7
Downloaded From Disc-Player.com Toshiba Manuals
Introduction
Identification of Controls
See the page in
for details.
Front panel
8
16
16
16
10
HDMI indicator
12
16
PAUSE button
16
USB jack
29
16
Rear panel
11
HDMI OUT jack
Power Cord
11
12
Y
VIDEO
PB
PR
VIDEO OUT
OPTICAL OUT
HDMI OUT
S-VIDEO OUT
AUDIO
OUT
R
ANALOG
L
COAXIAL DIGITAL
14
OPTICAL OUT jack S-VIDEO OUT jack
14
15
15
11
11
DVD display
The indicators vary depending on the kinds of discs you play.
No disc
Bad disc
OPEN
LOAD/CLOSE
DVD VIDEO
VIDEO CD
Audio CD
Picture
• During playback:
Example
• During playback:
Example
• During playback:
Example
• During thumbnail
viewing
Some discs may only
display chapter numbers.
Some discs may only
display track numbers.
8
Downloaded From Disc-Player.com Toshiba Manuals
Some discs may only
display track numbers.
Power off
Chapter/Track
number Indicator
Multifunctional indicator
(indicates operating status
or messages, etc.)
Remote control
Introduction
The instructions in this manual describe the functions on the remote control. See the page in
for details.
16
16
19
T / SEARCH button 19
22
PIC MODE button
17
23
23
24
24
16
16
17
18
18
17
17
18
18
25
16
18
20
25
16
19
16
21
DVD
USB
20
30
DVD button
29
* RETURN button
Return to menu display for VCD (2.0) discs with
menu.
22
USB button
29
* MENU button
Use the MENU button to display the menu included on
many DVDs. To operate a menu, follow the instructions
in “Locating a title using the top menu.” 18
9
Downloaded From Disc-Player.com Toshiba Manuals
Introduction
Identification of Controls (continued)
Loading batteries
1
Open the cover.
2
Insert batteries (R03/AAA size).
Operating with the remote control
Point the remote control at the remote
sensor and press the buttons.
Distance: About 7 m (23 feet) from the front of the
remote sensor
Angle:
About 30° in each direction of the front of
the remote sensor
Make sure to match the + and – on the batteries to
the marks inside the battery compartment.
Caution
• Never throw batteries into a fire.
Notes
• Be sure to use R03/AAA size batteries.
• Dispose of batteries in a designated disposal area.
• Attention should be drawn to the environmental aspects of
battery disposal.
• Do not mix different battery types or combine used batteries
with new ones.
• If the remote control does not operate correctly, or if the
operating range becomes reduced, replace both batteries
with new ones.
• If the batteries are dead or if you will not be using the remote
control for a long time, remove the batteries to prevent battery
acid from leaking into the battery compartment.
10
Downloaded From Disc-Player.com Toshiba Manuals
* Do not expose the remote sensor of the DVD player
to a strong light source such as direct sunlight or
other illumination. If you do so, you may not be able
to operate the DVD player via the remote control.
Notes on the remote control
• Direct the remote control at the remote sensor of the DVD
player.
• When using the remote control, press the buttons at
intervals of about 1 second to ensure the correct mode of
operation.
• Do not drop or give the remote control a shock.
• Do not leave the remote control near an extremely hot or
humid place.
• Do not spill water or put anything wet on the remote
control.
• Do not open the remote control.
• If the remote control is not going to be used for a long time,
remove the battery to avoid damage caused by battery
leakage corrosion.
CAUTIONS:
• Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
• Batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.
• Do not dispose of battery in fire; battery may explode or
leak.
• When discarding batteries, environmental problems must be
considered and local rules or laws governing the disposal
of these batteries must be strictly followed.
Connections
Connections
Connecting to a TV
Connect the DVD player to your TV.
Connecting to a TV
PB
Connections
Y
VIDEO
PR
VIDEO OUT
OPTICAL OUT
HDMI OUT
S-VIDEO OUT
AUDIO
OUT
R
ANALOG
L
COAXIAL DIGITAL
Normal TV
To VIDEO
OUT
(yellow)
S-Video cable (not supplied)
To audio
input
To video
input
(yellow)
To 2ch AUDIO OUT
(R: red, L: white)
If the TV has a S-video input, connect the DVD
player with an S-video cable. When using an
S-video cable, do not connect the yellow video
cable and component video cables (Y/PB/PR).
• Make the following setting.
On-screen display
Select:
Page
“Digital Output”
“Off”,
“PCM” or
“Bitstream”
33
“Video out”
Component
S-VIDEO
P-Scan
HDMI
Audio/Video cable (supplied)
32
Notes
• Refer to the owner’s manual of the connected TV as well.
• When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making
any connections.
• If your television set has one audio input, connect the left and right audio outputs of the DVD player to a Y cable adapter (not supplied)
and then connect to your TV.
• Connect the DVD player directly to your TV. If you connect the DVD player to a VCR, TV/VCR combination or video selector, the playback
picture may be distorted as DVDs are copy protected.
• Analog audio out will not have sound if DTS playback is selected.
Connecting to a TV (Using the component video jacks)
Interlaced outputs (ColorStream®)
Progressive outputs (ColorStream Pro®)
Some TVs or monitors are equipped with component video inputs.
Connecting to these inputs allows you to enjoy higher quality picture
playback.
Actual labels for component video inputs may vary depending on the
TV manufacturer. (ex. Y, R-Y, B-Y or Y, CB, CR)
In some TVs or monitors, the color levels of the playback picture may
be reduced slightly or the tint may change. In such a case, adjust the
TV or monitor for optimum performance.
Some TVs or monitors are equipped with component video inputs
that are capable of reproducing a progressively scanned video signal.
Connecting to these inputs allows you to view the highest quality
pictures with less flicker.
Consumers should note that not all high definition television sets
are fully compatible with this product and may cause artifacts to
be displayed in the picture. In case of 480 progressive scan picture
problems, it is recommended that the user switch the connection to
the “standard definition” output. If there are questions regarding our
TV set compatibility with this model 480p DVD player, please contact
our Customer Service Center.
To Y video
input
To PB video
input
Y
VIDEO
PB
PR
VIDEO OUT
To PR video
input
To audio input
OPTICAL OUT
HDMI OUT
S-VIDEO OUT
AUDIO
OUT
R
ANALOG
L
COAXIAL DIGITAL
To 2ch AUDIO OUT
(R: red, L:white)
Audio cable (not supplied)
Component video cable (not supplied)
11
Downloaded From Disc-Player.com Toshiba Manuals
Connections
Setting the video output signal (interlaced / progressive)
You can setting the video output signal for better picture
quality.
Press the SETUP button on the remote control and select the
Video option, then set the Video out to P-Scan. See 32 .
If your TV does not support the progressive scan format, the
picture will appear scrambled or blank. To return to normal
picture, turn off progressive scan (P-Scan) by setting the Video
out to Component mode.
• Make the following setting.
On-screen display
Select:
“Digital Output”
“PCM” or
“Bitstream”
33
“Video out”
Component
*P-Scan
(Progressive)
32
Page
* Only for TV equipped with component video input
jacks which support the progressive scan.
Notes
• Refer to the owner’s manual of the connected equipment as well.
• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet
before making any connections.
• If you place the DVD player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the DVD player away
from the tuner and radio.
• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level.
Otherwise, high volume sound may damage your hearing as well as the speakers.
• Turn off the amplifier before you connect or disconnect the DVD player’s power cord. If you leave the amplifier power on, the speakers
may be damaged.
• Analog audio out will not have sound if DTS playback is selected.
• ColorStream® and ColorStream Pro® are registered trademarks of Toshiba America Cousumer Products L.L.C.
Connecting to a display (Using a HDMITM cable)
Y
VIDEO
PB
PR
VIDEO OUT
OPTICAL OUT
HDMI OUT
S-VIDEO OUT
AUDIO
OUT
R
ANALOG
L
COAXIAL DIGITAL
To HDMI
Output
Available output signals are below:
• Auto
• 480p (progressive)
• 720p (progressive)
• 1080i (interlaced)
• 1080p (progressive)
• 1080p/24F (progressive)
HDMI Cable
(not supplied)
HDMI-compatible display
Setting the video quality (HDMI mode)
• Make the following setting.
The video quality is required to match your TV having HDMI feature
and suitable quality. Please also check your TV owner’s manual.
Set the video quality in HDMI Resolution menu (see 32 ) to
change the output signals as below.
If the appropriate video output signal is selected, the HDMI
indicator will lights up.
HDMI indicator
Video output signal
illuminates “ • 480p, • 720p,
• 1080i, • 1080p, • 24F ”
Auto
illuminates “ • 480p ”
480p (progressive)
illuminates “ • 720p ”
720p (progressive)
illuminates “ • 1080i ”
1080i (interlaced)
illuminates “ • 1080p ”
1080p (progressive)
illuminates “ • 1080p, • 24F ”
1080p/24F (progressive)
On-screen display
Select:
Page
“Digital Output”
“PCM”
33
“Video out”
HDMI
32
About HDMI
HDMI (High Definition Multimedia Interface) supports both video
and audio on a single digital connection for use with DVD players,
DTV, set-top boxes, and other AV devices. HDMI was developed
to provide the technologies of High Bandwidth Digital Content
Protection (HDCP) as well as Digital Visual Interface (DVI) in one
specification. HDCP is used to protect digital content transmitted
and received by DVI-compliant or HDMI-compliant displays.
HDMI has the capability to support standard, enhanced, or highdefinition video plus standard to multi-channel surround-sound audio.
HDMI features included uncompressed digital video, a bandwidth of
up to 2.2 gigabytes per second (with HDTV) signals, one connector
480p, 720p, 1080i,1080p and 1080p/24F are signals created with (instead of several cables and connectors), and communication
this DVD Player from original 480i signal. The resolution of the between the AV source and AV devices such as DTVs.
picture may not be increased even if they are selected.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
480p and 720p cannot be selected when the picture mode is trademarks or registered trademarks of HDMI licensing LLC.
23
sharp, color or contrast
.
12
Downloaded From Disc-Player.com Toshiba Manuals
Connections
Content of the output for each output jack is shown in the following table and differ depending on the On-Screen Display
Setting:
HDMI
Output
-
Content of output for each output jack
Video
Component
S-Video
Output
Output
Output
Composite
480i
-
-
Composite
Composite
480p
S-Video
-
480p
720p
1080i
1080p
1080p/24F
Composite
Composite
Composite
Composite
Composite
480i
480i
480i
480i
480i
-
Connections
On-Screen Display Setting
“Video out”
HDMI Output
Setting
Setting
Component
Invalid
(Interlaced)
S-VIDEO
Invalid
P-Scan
Invalid
(Progressive)
480p
720p
1080i
HDMI
1080p
1080p/24F
Notes
• If Auto is selected, it follows preference HDMI aspect ratio of TV.
• Refer to the owner’s manual of the connected TV as well.
• When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before
making any connections.
• If you have a HDMI (with HDCP) equipped monitor or display, you can connect it to this player using a HDMI cable.
• The HDMI connector outputs uncompressed digital video, as well as almost every kind of digital audio that the player is compatible
with, including DVD-Video, Video CD/Super VCD, CD, WMA, MP3 and DivX®.
• This unit has been designed to be compliant with HDMI (High Definition Multimedia Interface) depending on the component
you have connected. Using a HDMI connection may result in unreliable signal transfers.
• Because HDMI is an evolving technology, it is possible that some devices with an HDMI input may not operate properly with
this DVD player.
• When using HDMI cable, do not connect to other analog video outputs.
• No sound will be output from the HDMI cable if the digital out is not set to PCM.
• HDMI output is only available when the Video Out is set to “HDMI”. Otherwise the HDMI button is invalid.
Connecting to Optional Equipment
You can enjoy high quality dynamic sounds by connecting the DVD player to optional audio equipment.
• For connection to your TV, see “Connecting to a TV” .
• This section uses the following reference marks.
: Front speaker
: Rear speaker
: Sub woofer
: Center speaker
: Signal flow
Warnings
• When you are connecting (via the OPTICAL OUT or
COAXIAL DIGITAL AUDIO OUT jack) an AV decoder that
does not have Dolby Digital, Digital Theater Systems (DTS)
or MPEG2 decoding function, be sure to set “Digital Output”
to “PCM” from the on-screen displays. Otherwise, high volume
sound may damage your hearing as well as the speakers.
• When playing DTS-encoded discs (DVDs and audio CDs),
excessive noise may be output from the analog audio output
jacks. To avoid possible damage to the audio system, you
should take proper precautions when the analog audio output
jacks of the DVD player are connected to an amplification
system. To enjoy DTS Digital Surround™ playback, an
external 5.1 channel DTS Digital Surround™ decoder system
must be connected to the OPTICAL OUT or COAXIAL
DIGITAL AUDIO OUT jack of the DVD player.
Notes
• DO NOT connect the OPTICAL OUT or COAXIAL DIGITAL AUDIO OUT jack of the DVD player to the AC-3 RF input of a Dolby
Digital Receiver. This input on your A/V Receiver is reserved for Laser disc use only and is incompatible with the OPTICAL
OUT /COAXIAL DIGITAL AUDIO OUT jack of the DVD player.
• Connect the COAXIAL DIGITAL AUDIO OUT jack of the DVD player to the “DIGITAL (COAXIAL)” input of a Receiver or
Processor.
• Connect the OPTICAL OUT jack of the DVD player to the “DIGITAL (OPTICAL)” input of a Receiver or Processor.
• Refer to the owner’s manual of the connected equipment as well.
• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening
level. Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD player’s power cord. If you leave the amplifier power on, the
speakers may be damaged.
13
Downloaded From Disc-Player.com Toshiba Manuals
Connections
Connecting to Optional Equipment (Continued)
Connecting to an amplifier equipped with a Dolby® Digital decoder
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest
movies, and is now available to reproduce this realistic effect in the home. You can Manufactured under license from
enjoy motion picture and live concert DVDs with this dynamic realistic sound by Dolby Laboratories. Dolby and the
connecting the DVD player to a 6 channel amplifier equipped with a Dolby Digital double-D symbol are trademarks of
Dolby Laboratories.
decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder,
you will obtain the full benefit of Pro Logic from the same DVD movies that provide • Use DVDs encoded via the Dolby
full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby
Digital recording system.
Surround mark.
• Make the following setting.
Amplifier equipped with a
Dolby Digital decoder
To COAXIAL
type digital
audio input
On-screen display
Select:
Page
“Digital Output”
“PCM” or
“Bitstream”
33
To wall outlet
Connect
either
Optical digital cable
(not supplied)
75 Ω coaxial cable (not supplied)
Connecting to an amplifier equipped with Dolby Surround Pro Logic
Dolby Surround Pro Logic
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting • Make the following setting.
an amplifier and speaker system (right and left front speakers, a center speaker, On-screen display
Select:
and one or two rear speakers).
With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in “Connecting to an amplifier
equipped with a Dolby® Digital decoder.” Refer to that amplifier’s owner’s manual
and set the amplifier so you can enjoy Dolby Surround Pro Logic sound.
“Digital Output”
“PCM” or
“Bitstream”
Page
33
With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
* Connect one or two rear speakers.
The output sound from the rear
speakers will be monaural even if you
connect two rear speakers.
Amplifier equipped with
Dolby Surround Pro Logic
To audio
input
To wall outlet
To ANALOG
AUDIO OUT
Audio cable (not supplied)
14
Downloaded From Disc-Player.com Toshiba Manuals
Connections
Connecting to an amplifier equipped with a DTS® decoder
Amplifier equipped with
a DTS decoder
To COAXIAL
type digital
audio input
To wall outlet
Optical digital cable
(not supplied)
Connect
either
75 Ω coaxial cable (not supplied)
Manufactured under license under U.S.
Patent #: 5,451,942 & other U.S. and
worldwide patents issued & pending.
DTS and DTS Digital Out are registered
trademarks and the DTS logos and
Symbol are trademarks of DTS, Inc.
© 1996-2008 DTS, Inc. All Rights
Reserved.
• Use DVDs or audio CDs encoded
via the DTS recording system.
• Make the following setting.
On-screen display
Select:
Page
“Digital Output”
“Bitstream”
33
Connecting to an amplifier equipped with an MPEG2 audio decoder
MPEG2 sound
You can enjoy motion picture and live concert DVDs with dynamic realistic sound • Use DVDs encoded via the MPEG2
recording system.
by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2
• Make the following setting.
audio processor.
Amplifier equipped with an
MEPG2 audio decoder
To COAXIAL
type digital
audio input
On-screen display
Select:
Page
“Digital Output”
“PCM” or
“Bitstream”
33
To wall outlet
Optical digital cable
(not supplied)
Connect
either
75 Ω coaxial cable (not supplied)
Connecting to an amplifier equipped with a digital audio input
2 channel digital stereo
• Make the following setting.
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an
Select:
amplifier equipped with a digital audio input and speaker system (right and left On-screen display
front speakers).
“Digital Output”
“PCM”
Page
33
Amplifier equipped with
a digital audio input
To COAXIAL
type digital
audio input
To wall outlet
Optical digital cable
(not supplied)
Connect
either
75 Ω coaxial cable (not supplied)
15
Downloaded From Disc-Player.com Toshiba Manuals
Connections
Digital Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and now available for
home use, on DVDs or audio CDs.
If you have a DTS decoder or processor, you can obtain the full benefit of 5.1
channel DTS encoded sound tracks on DVDs or audio CDs.
Basic playback
Playing a Disc
This section shows you the basics on how to play a disc.
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
Basic playback
Preparations
• When you want to view a disc, turn on the TV and select the
video input connected to the DVD player.
• When you want to enjoy the sound of discs from the audio
system, turn on the audio system and select the input
connected to the DVD player.
1
Press the ON/STANDBY button.
2
Press OPEN/CLOSE.
3
To start playback in the stop mode
ON/STANDBY
The DVD player turns on.
The disc tray opens.
Press PLAY.
To pause playback (still mode)
Press PAUSE/STEP during playback.
To resume normal playback, press the
PLAY button.
• The sound is muted during still
mode.
Place the disc on the disc tray.
With the playback
side down
• There are two different disc sizes. Place the disc in
the correct guide on the disc tray. If the disc is out
of the guide, it may damage the disc and cause the
DVD player to malfunction.
• Do not place a disc which is unplayable in this DVD
player.
4
To obtain a higher quality picture
Occasionally, some picture noise not usually visible during
a normal broadcast may appear on the TV screen while
playing a DVD because the high resolution pictures on
these discs include a lot of information. While the amount
of noise depends on the TV you use with this DVD player,
you should generally reduce the sharpness adjustment on
your TV when viewing DVDs.
Press OPEN/CLOSE to close the disc tray.
Playback starts.
To stop playback
Press STOP.
To remove the disc
Press OPEN/CLOSE.
Remove the disc after the disc tray
opens completely.
Be sure to press the OPEN/CLOSE
button to close the disc tray after you
remove the disc.
To turn the power off
If you insert a DVD that contains a top menu, a
to select the
menu may appear. Use / / /
title you want to view, then press ENTER to start
playback.
• You may need to press the TOP MENU or MENU
button to display disc menu (depending on the actual
DVD.)
Notes
• If the disc tray is holding a disc you have already played, playback
will begin from the location where you last stopped. For resuming
playback, see 17 .
• Some video CD are recorded with PBC (Playback Control), a
menu with recorded contents may appear on the TV if you have
turned the PBC on. You can make your selection according to
its PBC menu. Press the PBC button on the remote control to
turn PBC on or off anytime during Video CD playback. When
switching from PBC off to PBC on mode, playback will start from
the beginning of the disc. To turn on the menu display again, press
the RETURN button.
16
Downloaded From Disc-Player.com Toshiba Manuals
Press ON/STANDBY to turn the unit off.
Automatic Power Off function
If the DVD player is stopped, or the screen saver is
engaged for approximately 20 minutes, the DVD player
will automatically turn itself off.
Notes
• Do not move the DVD player during playback. Doing so may
damage the disc.
• Use the OPEN/CLOSE button to open and close the disc tray.
Do not push the disc tray while it is moving. Doing so may cause
the DVD player to malfunction.
• Do not push up on the disc tray or put any objects other than
discs on the disc tray. Doing so may cause the DVD player to
malfunction.
• In many instances, a menu screen will appear after playback of
a movie is completed. Prolonged display of an on-screen menu
may damage your television set, permanently etching that image
onto its screen. To avoid this, be sure to press the STOP button
on your remote control once the movie is completed.
Variable Speed Playback
You can play discs at various speeds, and resume playback from the location where you stopped playback.
Playing in fast reverse or fast forward directions
Press REV or FWD during playback.
To resume normal playback
Press PLAY.
REV: Fast reverse playback
FWD: Fast forward playback
Notes
• The DVD player mutes sound and subtitles during reverse
and forward scan of DVDs.
• The playback speed may differ depending on the disc.
Playing frame by frame
Press PAUSE/STEP during still playback.
To resume normal playback
Press PLAY.
Each time you press the PAUSE/
STEP button, the picture advances
one frame.
Note: The sound is muted during frame by frame playback.
Playing in slow-motion
Press SLOW during playback.
To resume normal playback
Press PLAY.
Each time you press the SLOW
button, the slow-motion speed
changes in the following sequence:
Notes
• The sound is muted during slow-motion playback.
• 3 speeds are available.
Resuming playback from the same location
1
Press STOP at the location where you
want to interrupt playback.
2
Press PLAY.
The DVD player memorizes the
location where playback is stopped.
Notes
• There may be a difference in the location where playback
resumes depending on the disc.
• Settings you changed using the on-screen displays while the
DVD player keeps a location in the memory may function only
after the memory is cleared.
• Resuming playback does not work for VCD with PBC on.
The DVD player resumes playback
from the location where you stopped
playback.
17
Downloaded From Disc-Player.com Toshiba Manuals
Basic playback
Each time you press the REV or
FWD button, the playback speed
changes.
Basic playback
To start playback from the beginning regardless of the location where you stopped playback.
1 Press STOP twice.
The DVD player deletes the memory of the location.
2 Press PLAY.
Playback starts from the beginning of the current title.
Playback starts from the beginning of the disc.
Playback starts from the beginning of the current track.
• If you want to return to the beginning of a DVD, open and close the disc tray once with the OPEN/CLOSE button
before pressing the PLAY button.
Locating a Desired Section
Normally, DVDs are divided into titles, and the titles are sub-divided into chapters. VIDEO CDs and audio CDs are divided into
tracks. You can quickly locate any specific title, chapter, or track.
Locating a title using the top menu
1
3
Press TOP MENU.
Press ENTER.
Playback starts from chapter 1 of the
selected title.
The top menu appears on the TV
screen.
e.g.
2
Press
want.
/
/
/
to select the title you
If the titles in the top menu are
assigned a number, you can directly
locate a specific title by pressing its
designated number with the number
buttons.
Notes
• The instructions above describe basic procedures which may
vary depending on the contents of the DVD. If different instructions
appear on the TV screen, follow those instructions.
• If you display the top menu during playback and press the TOP
MENU button again without selecting any title, the DVD player
may resume playback from the point where you first pressed
the TOP MENU button (depending on the actual DVD.)
• This method of locating a title is available only on a disc that
contains a top menu.
• Instruction notes of discs may refer to the button that displays
the top menu as TITLE button.
Locating a specific chapter or track
Press SKIP
or repeatedly to access the
chapter or track number you want.
Playback starts from the selected chapter or track.
To locate succeeding chapters or tracks.
Playback starts from the beginning of the
current chapter or track.
When you press twice in quick successions,
playback starts from the beginning of the
preceding chapter or track.
18
Downloaded From Disc-Player.com Toshiba Manuals
Note
• Some titles may not display chapter numbers.
Advanced playback
Accessing a Specific Location Directly
Locating a specific title/chapter/time
1
Press T.
Press / to highlight the Title/Chapter/
Track/Time.
SEARCH
T
e.g.
1
00 : 00 : 00
2
Press /
to locate.
2
00 : 00 : 00
to select a section you want
e.g. When you want to locate a
chapter.
Accessing the time using number buttons:
Just enter 2 digits in order.
The first two numbers you entered represent hours.
The second two numbers you entered represent
minutes.
The third two numbers you entered represent
seconds.
To set and play favorite bookmark during
playback
1. Press T twice, the display of Bookmark appears, then
press ENTER to mark the desired scene.
SEARCH
1
T
Bookmark
00 : 00 : 00
Or
Press the number buttons to enter title,
chapter (track) number or time.
2. Press ENTER to play the favorite bookmark.
To set other bookmarks.
Follow step 1 and move through the menu by pressing
the or button.
3
Press ENTER.
Playback starts from the selected
section.
Notes
• Pressing the CLEAR button resets the numbers. To clear the
display, press the T button several times.
• For VCD with PBC on, accessing tracks using number buttons
does not work.
Press T again to remove this display.
To cancel the Bookmark
Follow step 1, then press the CLEAR button to cancel
the bookmark. Move through the menu by pressing the
or button to cancel other bookmarks.
Notes
• Some discs may not work with marking operation.
• The marking is canceled when you open the disc tray or turn
the power off.
• Some subtitles recorded around the marker may fail to
appear.
19
Downloaded From Disc-Player.com Toshiba Manuals
Advanced playback
Track
Time
Disc Time
Accessing chapters/tracks using number
buttons:
For chapter/track numbers 10 to 19, press +10 once
and the number 10 appears then enter the second
digit. Press ENTER.
For chapter/track numbers 20 to 29, press +10 twice
and the number 20 appears then enter the second
digit. Press ENTER.
For example, if you want to select chapter/track 25,
first press +10 twice then press the number button
“5”. Then press ENTER.
Advanced playback
Repeating a Specific Segment
You can specify a desired segment and repeat it.
Repeating a specific segment
1
Press A-B RPT at the beginning of the
segment (point A) you want to play
repeatedly.
To resume normal playback
Press A-B RPT until RepAB Off is displayed.
A-B RPT
RepAB Off
A-B RPT
Rep A-
2
Press A-B RPT again at the end of the
segment (point B).
The DVD player automatically returns to
point A and starts repeat playback of the
selected segment (A-B).
A-B RPT
Notes
• Some discs may not permit A-B repeat operation.
• You cannot set the A-B repeat function for a segment that
includes multiple camera angles.
• You can specify a segment only within the current title or track
(VIDEO CD).
• There may be a slight difference between point A and the
location where playback actually resumes depending on the
disc.
Rep A-B
Playing in a Varied Order
You can play titles, chapters within a title, or tracks in a varied order.
For Audio CD, please see “Playing MP3/WMA files” 26 .
Playing titles, chapters or tracks in a varied order
1
Press PLAY MODE.
PLAY MODE
Press / button to select desired
features and then press ENTER button
to toggle desired mode.
e.g.
2
Press PLAY.
Press the PLAY button, the DVD player
starts playback in the selected mode.
Play Mode
Mode
Repeat
Normal
: Off
To resume normal playback
Press ENTER until the Off/Normal is displayed.
Normal
Shuffle
Chapter
PBC
(VCD only)
Title
Single
Shuffle: Playbacks in random order.
PBC:
Playbacks in PBC On mode (VCD only).
Chapter: Repeats the current chapter.
Title:
Repeats the current title.
Single: Repeats the current track.
All:
Repeats the entire disc.
Off:
Resumes normal playback.
20
Downloaded From Disc-Player.com Toshiba Manuals
Note
Some discs may not permit these operations.
Playing in a Favorite Order
You can combine your favorite titles, chapters or tracks and play them in the order you determine. You can program up to
12 selections into the memory (Memory playback).
Setting titles, chapters or tracks in a favorite order
1
Insert a disc and press MEMORY during
stop.
MEMORY
The following display appears.
e.g. DVD
Memory
Play
Chapter number
Title number
1. While the display appears on the TV screen, press
/ / / to move the highlighted bar to the item
you want to cancel.
2. Press CLEAR.
To resume normal playback from memory
playback
Press MEMORY button.
Press / / / to move the highlighted bar to “Clear
All”, then press ENTER. All the input programs will be
cleared.
Press PLAY button to resume normal playback.
e.g. VCD
Memory
Play
All
Track number
Select the items in the order you want by
pressing the number buttons.
Each time you press the / / / button, the
space is highlighted in turn. Highlight where you
want to enter, then press the corresponding number
buttons.
To select another chapter in the same title, you need
to select the title number.
To select tracks from a VIDEO CD/audio CD in order,
press the number buttons for the track.
DVD: Normal playback will start from current
playback.
VCD: Normal playback will start from the
beginning of the disc.
To program during playback
If you press the MEMORY button during playback, a
programming display appears.
Follow steps 2 and 3.
Notes
• Some discs may not permit memory playback operation.
• If you select repeat during memory playback, the DVD player
repeats the current memory playback.
• If you press the MEMORY button while the display appears
on the TV screen, the display disappears.
• The programmed selections will be cleared when you open
the disc tray or turn off the DVD player.
Press / / / to move the highlighted
bar to Play, then press the ENTER.
The DVD player starts memory
playback.
21
Downloaded From Disc-Player.com Toshiba Manuals
Advanced playback
All
3
1. While the display appears on the TV screen, press
/ / / to move the highlighted bar to the item
you want to change, then press CLEAR.
2. Press number buttons to input the new title/chapter/
track number.
To cancel the programmed selections
Title Chapter
2
To change the programmed selections
Advanced playback
Zooming a Picture
You can magnify areas within a picture.
Zooming a picture
1
To resume normal playback
Press ZOOM during normal, slow or still
playback.
e.g.
Off is displayed.
ZOOM
2
Each time you press the ZOOM button, the magnification
level changes as follows:
1
Press ZOOM repeatedly until the
Original picture is restored.
The centre part of the image will be
zoomed in.
ZOOM
2
3
Off
Notes
• Some discs may not respond to zoom feature.
• During some scenes, the buttons may not work as
described.
• Zooming does not work on subtitles or menus included on
DVDs.
• The magnification level varies depending on the picture size
you select.
Press the ZOOM button to select the magnification
level.
Press the / / / buttons to view a different part of the
image. You may move the image from the centre position
to UP, DOWN, LEFT and RIGHT direction.
When you reach the edge of the image, the display will
not shift anymore in that direction.
Selecting the Sound Enhancement (E.A.M.*)
You can easily switch a preferred audio enhancement.
*E.A.M.: Enhanced Audio Mode
Selecting the sound enhancement
1
To exit the audio enhancement selection
Press E.A.M.
E.A.M.
The sound enhancement will appear:
Leave the DVD player unattended for about a few
seconds after having made a selection.
3D effect
Press the E.A.M. button again, the sound
enhancement change to Off.
3D*:
To obtain expansive virtual surround sound effects
from two speakers.
To use this enhancement on sounds output from the
ANALOG AUDIO OUT jacks, be sure to set “Digital
Output” to “PCM”.
* Effective in playback of a DVD .
22
Downloaded From Disc-Player.com Toshiba Manuals
Notes
• Actual effects to sounds may vary depending on the speaker
system. Make selection according to your preference.
• Actual effects to sounds may vary depending on the disc.
• When the DVD player is connected to an amplifier equipped
with Dolby Surround Pro Logic, select “3D effect”. Otherwise,
Dolby Surround Pro Logic may function differently than
usual.
Selecting the Picture Mode
This DVD player provides four sets of picture color settings. You can easily select a preferred picture mode.
Selecting the picture mode
1
Select the picture mode by pressing PIC
MODE repeatedly.
PIC MODE
Each time you press the PIC MODE
button, the picture mode changes.
Notes
• Picture mode is only available when the Video out is set
to “HDMI” and outputs via HDMI.
• If HDMI resolution is set to 480p or 720p, the Picture
Modes cannot be activated.
• When the picture mode is Sharp, Color or Contrast, the
HDMI resolution cannot be set to 480p and 720p.
• The effect of Picture Modes may not be seen depending
on the content of the disc or the TV connected.
• The effect of Picture Modes may not be seen during
special playback mode such as ZOOM etc.
• For detail please see “Setting details”
32
Advanced playback
Select from preset picture color settings to match the
type of picture you are watching (Sharp, Color, Contrast
and Off).
.
Selecting Subtitles
You can display subtitles on the TV screen and
select a subtitle language from those included on
the DVD.
Selecting a subtitle language
1
Press SUBTITLE during playback.
SUBTITLE
The current subtitle setting is
displayed.
2
Press SUBTITLE while the subtitle setting
is displayed on the TV screen.
Each time you press the SUBTITLE
button, the subtitle languages included
on the DVD change.
e.g.
e.g.
To turn subtitles on or off
1. Press SUBTITLE during playback.
2. Press SUBTITLE repeatedly until
Off
is displayed.
Notes
• Some DVDs are set to display subtitles automatically, and
you cannot turn them off even if you set the subtitle function
to off.
• During some scenes, the subtitles may not appear immediately
after you select your desired language.
• Some DVDs will allow you to make subtitle selections and
turn subtitles on or off only via the disc menu.
To turn off the subtitle setting display,
press the SUBTITLE button repeatedly
until Off is displayed.
Notes
• When you turn on the DVD player or replace a disc, the player
returns to the initial default setting.
• When you select a subtitle language which is not included on
the disc, the DVD player plays a prior language programmed
on the disc.
• During some scenes, the subtitles may not appear
immediately after you change the subtitle language.
23
Downloaded From Disc-Player.com Toshiba Manuals
Advanced playback
Selecting the Camera Angle
If the scene was recorded from multiple angles, you
can easily change the camera angle of the scene
you are watching.
Changing the camera angle
1
Press ANGLE while playing a scene
recorded with multiple angles.
While playing a scene recorded with
multiple angles, press the ANGLE
button.
ANGLE
2
Press ANGLE while the angle number is
displayed on the TV screen.
ANGLE
Press the ANGLE button repeatedly
to change the scene to the next angle
in those recorded.
• About two seconds later, playback
continues from the new angle you
selected.
• If no button is pressed within
10 seconds, playback continues
without changing the current
angle.
e.g.
Number changes to show the number
of the current angle. (The maximum
number of possible angles is 9)
To resume normal playback
Press ANGLE repeatedly until the “
1/3
” is displayed.
Notes:
• This function can only be used for discs on which scenes shot from multiple angles have been recorded.
• If only one angle is recorded, “ 1/1 ” is displayed.
Selecting a Language
You can select a preferred language and sound recording
system from those included on the DVD.
Selecting a playback audio setting
1
Press AUDIO during playback.
The current audio setting is
displayed.
AUDIO
e.g.
Recorded audio for mat number
changes sequentially. (The maximum
number of possible audio formats
is 8.)
If the abbreviation of the language appears instead
of the language name, refer to the list of languages
and their abbreviations 36 .
2
Press AUDIO while the audio setting is
displayed on the TV screen.
AUDIO
Each time you press the AUDIO
button, the audio settings included on
the DVD change.
The audio setting display will disappear after a few
seconds.
24
Downloaded From Disc-Player.com Toshiba Manuals
Notes
• When you turn on the DVD player or replace a disc, player
returns to the initial default setting.
If you select a sound track which is not included on the disc,
the DVD player plays a prior sound track programmed on the
disc.
• Some discs allow you to change audio selections only via the
disc menu. If this is the case, press the MENU button and
choose the appropriate language from the selections on the
disc menu.
Selecting sound channels of VIDEO CDs
AUDIO
Press AUDIO repeatedly during
playback to hear a different audio
channel (Stereo, Left, Right or Mix).
On-screen Display Operation
When you turn on the on-screen display, you can view information on operational status and access features and
settings.
On-screen display operation
Press NAVI.
NAVI
The following display appears.
e.g. When playing a DVD.
Select by pressing
/
then press ENTER to
access the feature.
Chapter number
00:30:34/01:00:52 1/1 5/12
Advanced playback
Elapsed time
Remaining time
Title number
Features
:
Title number (Track number)
:
:
Chapter number
:
Elapsed time of the current title or track
Remaining time of the current title or track
:
To start playback.
To pause playback.
To stop playback.
Playback starts from the beginning of the current
chapter or track.
When you press twice in quick successions,
playback starts from the beginning of the preceding
chapter or track
To locate succeeding chapters or tracks.
Viewing the operational status
1. Press DISPLAY.
The following display appears.
Time counter
“PBC On” will
be displayed
when PBC
is on.
Elapsed time / remaining time of the current track
Elapsed time / remaining time of the current title
Time
Time
00:01:12 / 01:52:46
Title number
Chapter number
2. Press DISPLAY again.
Audio setting
D 2 Ch Eng
Subtitle setting
3. To turn off the display, press DISPLAY
again.
Bit rate (Mbit/s)
Amount of picture, sound and subtitle data in
the DVD transferred per second.
The larger the value is, the more data
processed, but this does not necessarily
insure better picture quality.
Angle setting
Bit rate
25
Downloaded From Disc-Player.com Toshiba Manuals
Advanced playback
Playing MP3/WMA Files
You can play MP3/WMA files that have been recorded on a CD-R or CD-RW on the DVD player.
Playing MP3/WMA files
Preparations
• Make sure that a disc you want to play is compatible
with this DVD player.
1
2
Place a CD that contains MP3/WMA files
on the disc tray.
3
To stop playback, press STOP.
Press OPEN/CLOSE to load the disc.
A list of folders/files will appear on the screen.
Press / to select the desired folder or track/
file, then press ENTER.
If a track/file is selected, playback will start.
If a folder is selected, the files in the folder will appear.
Selecting a specific time of the current track
1. Press T.
2. Enter the time to select a specific time you want to play.
3. Press ENTER to begin playback of the selected time.
Notes
• Letters of a file/folder name overflowing the given space are
not displayed.
• You can play in fast reverse or fast forward during MP3/WMA
playback.
Play modes for MP3/WMA/CD/DivX®
When you play MP3/WMA/CD/DivX®, you are able to modify
the Play modes through the Toolkit which appears on the right
of below picture on the screen. Press / buttons to navigate
between the windows and / buttons to select files/tracks or
play mode items. Then press ENTER button. Please refer to
below steps to playback files/tracks in the Program view list:
1. Select Edit mode in the Toolkit then press ENTER button to
start edit mode.
2. Select a file/track or more files/tracks you want in the original
view list with the ENTER button.
3. Select Add to program in the Toolkit then press ENTER. “ ” will
disappear from the screen. It means that the files/tracks you
have selected already added into the program view list.
4. Select Program view in the
Toolkit then press ENTER to 1 / 3
T01_Divx1.5Mbp.MP3
open the files/tracks in the
T01_Divx1.5Mbp
Repeat : Off
T02_Divx3Mbps
Program view list that you
Mode : Normal
T03_Divx4Mbps
already selected in step 2.
5. Press PLAY to playback all
JPEG Preview
files/tracks in the Program
view list.
The Toolkit has the following play mode items:
• Filter (Audio/Photo/Video): Sets file filters.
Filter is not applicable to Audio CD.
• Repeat (Off/Track/All):
Off: Resumes normal playback.
Track: Repeats the current track.
All: Repeats all files on the current folder or all tracks on the disc.
• Mode (Normal/Shuffle/Music Intro):
To pause playback
Normal: Resumes normal playback.
Shuffle: Playbacks track/file in random order.
Press PAUSE/STEP during playback.
Music Intro: Only playbacks the first 10 seconds of all the
fi
les on the current folder or all tracks on the disc.
To resume normal playback, press
• Edit mode: Memory operation works only when Edit mode
the PLAY button.
is selected. After finish storing the files/tracks you want into
the Program view list, select “Edit mode” again and press
Notes
ENTER to release edit mode.
• Some discs may not permit this operation.
• The OPTICAL OUT or COAXIAL DIGITAL AUDIO OUT jack • Program view: To view tracks/files in the Program view list.
outputs MP3/WMA sounds in the linear PCM format regardless It is disabled when the Program view list is empty.
• Add to program: Add files/tracks to the Program view list. It
of the current “Digital Output” selection.
is disabled if the Edit mode is not selected. (The maximum
• The SKIP function is also available.
number of files/tracks can be added is 30.)
Playable files
• Browser view: To view files/tracks in the original view list.
•
Clear program: Delete the files/tracks in the Program view
MP3/WMA disc compatibility with this player is limited as follows:
list. Select a file/track or more you want to delete in stop
• Playable discs:
CD-R (650MB / 74 min. only)
mode. “ ” will appear besides the deleted file/track. Select
CD-RW may not be compatible.
Clear program and then press ENTER. It is disabled if the
• Sampling Frequency:
44.1 kHz only
Edit mode is not selected.
• Bit rate:
MP3: 32 kbps - 320 kbps (CBR*)
This DVD player requires discs/recordings to meet certain technical
WMA: 48 kbps - 192 kbps (CBR*)
standards in order to achieve optimal playback quality. Pre-recorded
• CD physical format:
Mode 1, Mode 2 XA Form 1
DVDs are automatically set to these standards. There are many different
• File system:
ISO9660 Level 1, 2 or Joliet
• File name:
A file name should be in alphabet and types of recordable disc formats (including CD-R containing MP3/WMA
numerals only, and must incorporate files). Because this area of technology is still evolving, Toshiba cannot
guarantee that all recordable discs will produce optimal playback quality.
“MP3” or “WMA” extension.
The technical criteria set forth in this owner’s manual are meant only
e.g. “********.MP3”, “********.WMA”.
as a guide.
• Total number of folders: Less than 256
• Total number of files:
Less than 1000
Please be advised that you must obtain permission from the
• WMA codec version:
V7 or V8 (Stereo sound only)
applicable copyright owners to download copyrighted content,
* CBR = Constant Bit Rate
including music files, in any format, including the MP3 formats, prior
Note: When the MP3/WMA file is out of the above specifications, to the downloading thereof. Toshiba has no right to grant and does
not grant permission to download any copyrighted content.
the song may be skipped or muted with counter moving.
26
Downloaded From Disc-Player.com Toshiba Manuals
Advanced playback
Viewing JPEG Files
You can play JPEG files that have been recorded on a CD-R or CD-RW on the DVD player. You can select a preferred view:
a page of 9 thumbnail images or a single image view. Also, rotating, enlarging and shifting of each image can be possible.
Viewing JPEG files
Preparations
• Prepare a disc that contains JPEG files you want to view (see next page for Jpeg files compatibility). In Setup
Menu, it is preferred to select “Original” for “View Mode” 32 .
• Make your TV shape conform to the 4:3 picture size. Only 4:3 pictures can be played regardless of the function
settings via the on-screen displays of the DVD player. If the TV is adjusted to other sizes, e.g. “16:9”, images will
appear to be horizontally expanded. For details, refer to the owner’s manual of your TV.
1
Press OPEN/CLOSE to open the disc tray,
place a disc that contains JPEG files.
To rotate an image
A list of files in
the disc appears.
(Selection mode)
e.g.
Press the ANGLE button repeatedly. The image will rotate in
the clockwise direction as follows:
1 /3
Repeat : Off
Mode
ANGLE
: Normal
To resume normal playback
W: 515 H:770
Press the ZOOM repeatedly until
/
button to select your
Press
desired file, and then press ENTER
or PLAY button to start slide show
playback 32 .
Press STOP to display a folder list.
Note: When you press / button to
select the left file, the selected picture
will appear at the lower right corner.
To quit the JPEG playback, press STOP.
• Pressing the OPEN/CLOSE button to
open the disc tray can also quit the
playback.
ZOOM
Off
is displayed.
• Original picture is restored when Off
appears.
• Depending on the file size, some files may
not display the entire image.
Viewing a thumbnail view
1
Press TOP MENU in full-screen review.
e.g.
To pause playback
Press PAUSE/STEP during playback
To resume nor mal playback, press
PLAY.
To change the image
To view the succeeding image, press SKIP
To view the previous image, press SKIP
Press the / /
/
to select
an image, press PLAY to view
one image in full-screen and
automatically images will be
displayed one by one again in a
few seconds.
.
.
To magnify image
Turn the page if necessary
Press ZOOM repeatedly.
Press SKIP
screen.
ZOOM
Each time you press the ZOOM button, the
magnification level changes as follows:
1
2
3
/
to review other thumbnail
Off
27
Downloaded From Disc-Player.com Toshiba Manuals
Advanced playback
Press OPEN/CLOSE to close the disc
tray. A list of folders/files will appear on
the screen.
Press the / / / buttons to view a different part of the
image. You may move the image from the centre position
to UP, DOWN, LEFT and RIGHT direction. When you reach
the edge of the image, the display will not shift anymore in
that direction.
Advanced playback
JPEG files compatibility
Discs whose compatibility with this DVD player has been confirmed by TOSHIBA are as follows.
CANON QuickCD
Kodak Picture CD
FUJICOLOR CD
NORITSU QSS CD
JPEG disc compatibility with this DVD player is limited as follows:
• Playable discs:
CD-R (650MB / 74 min. only)
CD-RW may not be compatible.
• CD physical format:
Mode 1, Mode 2 XA Form 1
• File system:
ISO9660 Level 1, 2 or Joliet
• File name:
A file name should be in alphabet and numerals only, and must incorporate “JPG”
extension. e.g.“********.JPG” (Do not name the file with “JPE” or “JPEG” extension.)
• Total number of folders:
Less than 256
• Total number of files:
Less than 1000
Depending on the file size, some files may not display the entire image.
Some discs may not permit this operation. Especially, the following conditions of included files will increase the disc’s inability.
1. Pixels over 2880 x 1920 in height and/or width
2. File size over 2M bytes
3. File format except Exif
Playing DivX®, MPEG-4 Files
You can play DivX® and MPEG-4 files that have been recorded on a CD-R or CD-RW on the DVD player.
Playing DivX®, MPEG-4 files
1
Press OPEN/CLOSE to open the disc
tray, place a disc that contains DivX® or
MPEG-4 files.
Press OPEN/CLOSE to close
the disc tray, after completion of
reading, a list of folders in the disc
will appear.
A list of folders in the
disc appears.
1 /3
I
Repeat : Off
Mode
e.g.
: Normal
Press / to select your desired
file, and then press ENTER or
PLAY button to start playback.
Press STOP to display a folder
list.
Playable files
DivX®, MPEG-4 disc compatibility with this player is limited as
follows:
• Playable discs:
CD-R (650MB / 74 min. only)
CD-RW may not be compatible.
• DivX® versions:
DivX® 3.11, 4.12, 5.0, 5.1
• Audio format:
CBR MP3, VBR MP3, Mono MP3,
DivX® AC3
• Enhance video:
GMC, Qpel, Progressive B-frames
• Frame rate:
8 to 25 fps
• CD physical format:
Mode 1, Mode 2 X A Form 1
• File system:
ISO9660 Level 1, 2 or Joliet
• File name:
A file name should be in alphabet
and numerals only, and must
incorporate “DIVX” or “AVI”
extension.
e.g. “ *******.DIVX ”, “ *******.AVI ”
• Total number of folders: Less than 256
• Total number of files:
Less than 1000
Notes
• It is recommended you record same kind of files in a CD-R or
CD-RW.
• Some DivX® Video-On-Demand files may require registration
code of your DVD player, you may get the code in Misc settings
34 .
ABOUT DIVX VIDEO: DivX® is a digital video format created by
DivX, Inc. This is an official DivX Certified device that plays DivX
video. Visit www.divx.com for more information and software tools
to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device
must be registered in order to play DivX Video-on-Demand (VOD)
content. To generate the registration code, locate the DivX VOD
section in the device setup menu. Go to vod.divx.com with this
code to complete the registration process and learn more about
DivX VOD.
DivX® is a registered trademark of DivX, Inc. and is used
under license.
28
Downloaded From Disc-Player.com Toshiba Manuals
Advanced playback
Playing USB Device
You can connect the USB flash drives (not included) to the USB jack on the front of DVD player.
You can play the files in MP3, WMA, DivX® or JPEG format stored on a USB flash drive by connecting it to this player.
Connecting to USB flash drive
1
Plug the USB flash drive to the USB jack
on the front of DVD player.
2
Press the USB button on the remote
control to select USB mode during
DVD stop.
To pause playback
Press PAUSE/STEP during playback
To resume nor mal playback, press
PLAY.
To stop playback
1 /16
01.MP3
01
02
03
04
05
A list of folders/files
will appear on the
screen.
06
Repeat : Off
Mode
: Normal
To return to DVD mode
DVD
JPEG Preview
e.g.
• Pressing the DVD button on the remote
control to resume DVD playback during
USB device stop.
Press / button to select your
desired file, and then press ENTER
or PLAY button to start playback.
Notes
• It is recommended to plug the USB flash drive when the DVD player is off.
• It does not support USB harddisk mass storage device, multi-card reader and other USB computer peripheral.
• It only supports FAT format (e.g. It does not support NTFS).
• It only supports USB flash drive (max. 4G bytes).
• The unit can recognise up to 127 folders and 999 files only.
• It is not possible to play back files whose file size exceeds 1G bytes.
• The connection may not be available depending on the type of your USB flash drive.
• Do not disconnect the USB flash drive when you are playing it, it may corrupt the data. You may remove it in stop
mode or DVD mode.
29
Downloaded From Disc-Player.com Toshiba Manuals
Advanced playback
• Pressing the OPEN/CLOSE button to
open the disc tray can also quit the
playback.
USB
Function setup
Customizing the Function Settings
You can change the default settings to customize performance to your preference.
Setting details
Setting procedure
1
Press SETUP during stop.
OSD language : English
The following on-screen display
appears.
Language
: Off
: English
DVD menu
OSD language : English
: English
: Off
: English
DVD menu
: English
OSD language
2
Press
/
to select an option for the
setting you want to change, then press .
Language settings
Video settings
Audio settings
Rating settings
Misc settings
3
Press / to select the setting you want
to change, then press ENTER.
English: To view on-screen displays in English.
Français: To view on-screen displays in French.
Español: To view on-screen displays in Spanish.
1) Press SETUP button.
2) Press button to select OSD language.
3) Press ENTER button, then use the
/
button to
select a preferred
language.
OSD language
4) P r e s s E N T E R
button.
Español
5) P r e s s S E T U P
DVD menu
button to exit the
menu.
Subtitle
4
5
6
Change the selection by / buttons,
by referring to the corresponding pages,
then press ENTER.
Repeat steps 3 and 4 to change other
settings.
To select another option, press
step 2.
to go back to
English:
French:
Spanish:
Auto:
Off:
DVD
To display subtitles in English.
To display subtitles in French.
To display subtitles in Spanish.
To display subtitles in different languages other
than you selected.
To disable subtitles.
1) Press SETUP button.
2) Press
button then use the
/
button to select
Subtitle.
3) Press ENTER button, then use the / button to select
a preferred language.
4) P r e s s E N T E R
OSD language
button.
5) P r e s s S E T U P
French
button to exit the
Spanish
menu.
DVD menu
Press SETUP.
The on-screen display disappears.
Note
To quit the procedure, press the SETUP button to turn off the
on-screen display.
30
Downloaded From Disc-Player.com Toshiba Manuals
Notes
• Some DVDs may be set to display subtitles in a different
language other than you selected. A prior subtitle language
may be programmed on the disc.
• Some DVDs allow you to change subtitle selections only via
the disc menu. If this is the case, press the MENU button and
choose the appropriate subtitle language from the selection
on the disc menu.
Audio
Video
DVD
Aspect Ratio
Video out
: HDMI
HDMI Resolution : Auto
1) Press SETUP button.
2) Press
button, then use the
/
button to select
Audio.
3) Press ENTER button, then use the / button to select
a preferred language.
4) Press ENTER button.
5) Press SETUP button to exit the menu.
OSD language
French
Spanish
Aspect Ratio
JPEG Interval
: 5 seconds
Picture Modes
: Sharp
DVD
1) Press SETUP button.
2) Press /
button to select Video.
button, then use the
/
button to select
3) Press
Aspect Ratio.
4) Press ENTER button, then use the / button to shift
and change the TV type.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Aspect Ratio
Note
Some DVDs may not be played in a different language
than you selected. A prior language may be programmed
on the disc.
DVD menu
Video out
HDMI Resolution : Auto
JPEG Interval
: 5 seconds
Picture Modes
: Sharp
DVD
English: To display DVD Menus in English.
French: To display DVD Menus in French.
Spanish: To display DVD Menus in Spanish.
1) Press SETUP button.
2) Press button, then use the / button to select DVD
menu.
3) Press ENTER button, then the / button to select a
preferred language.
4) Press ENTER button.
5) Press SETUP button to exit the menu.
OSD language
: Off
DVD menu
French
Spanish
Note
Some DVDs may not include your pre-selected language. In
this case, the DVD player automatically displays disc menus
consistent with the disc’s initial language setting.
4:3
Select when a standard 4:3 TV is
connected.
Displays pictures cropped to fill your TV
screen. Either or both sides of the picture
are cut off.
16:9
Select when a 16:9 TV is connected.
Notes
• The displayable picture size is preset on the DVD.
Therefore, the playback picture of some DVDs may not
conform to the picture size you select.
• When you play DVDs recorded in the 4:3 picture size
only, and you own a 16:9 TV set, Video Output picture
will be 16:9 only. Please change TV picture setting by
TV side.
• If you select “16:9” and you own a 4:3 TV set, the
DVD playback picture will be horizontally distorted
during playback. Images will appear to be horizontally
compressed. Always be sure that your TV shape
conforms to the actual TV in use.
31
Downloaded From Disc-Player.com Toshiba Manuals
Function setup
: Off
DVD menu
: 16 : 9
: Auto Fit
English: To play sound tracks in English.
French: To play sound tracks in French.
Spanish: To play sound tracks in Spanish.
Function setup
Customizing the Function Settings (continued)
Setting details
View Mode
HDMI Resolution
The user may select one of the following options:
Fill:
Fill the screen with decoded image.
Original: Display image as it original size. “Original” is
preferred for Jpeg viewing.
Auto Fit: Automatically fit the decoded image on screen
without distortion.
Pan Scan: Automatically display decoded image on full
screen without distortion.
1) Press SETUP button.
button to select Video.
2) Press /
3) Press button, then use the / button to select View
Mode.
4) P r e s s E N T E R
: 16 : 9
Aspect Ratio
button, then use
the / button to
select the options
Video out
(Fill, Original, Auto
HDMI Resolution
Fit or Pan Scan).
JPEG Interval
5) P r e s s E N T E R
Picture Modes : Sharp
button.
6) P r e s s S E T U P
button to exit the
menu.
1) Press SETUP button.
2) Press /
button to select Video.
3) Press button, then use the / button to select HDMI
Resolution.
/
button to
4) Press ENTER button, then use the
select the options
(Auto, 480p, 720p,
: 16 : 9
Aspect Ratio
1080i, 1080p or
: Auto Fit
Auto
1080p/24F).
Video out
480p
5) P r e s s E N T E R
HDMI
Resolution
720p
button.
1080i
6) P r e s s S E T U P
JPEG Interval
button to exit the
1080p
Picture Modes
menu.
Pan Scan
Select when a standard 4:3 TV is
connected. Displays pictures cropped to
fill your TV screen. Either or both sides
of the picture are cut off.
Auto Fit
Automatically fit the decoded image on
screen without distortion. Black bars will
be present on top/bottom or left/right of
screen.
Note: Depending on the DVDs, you may not be able to view
the mode as selected.
Video out
1) Press SETUP button.
2) Press /
button to select Video.
3) Press button, then use the / button to select Video
out.
4) P r e s s E N T E R
button, then use
: 16 : 9
Aspect Ratio
the / button to
: Auto Fit
select the output
Video out
mode (Component,
S-VIDEO
S-VIDEO, P-Scan
HDMI Resolution
or HDMI).
P-Scan
JPEG
Interval
5) P r e s s E N T E R
HDMI
Picture
Modes
button.
6) Press SETUP button
to exit the menu.
Component:Select if you connect the DVD to your TV which
has component video inputs.
S-VIDEO: Select if you connect the DVD to your TV via
S-video input.
P-Scan: Select if you connect the DVD to your TV which has
component video inputs that support progressive scan.
HDMI: High Definition Multimedia Interface. Select if you
connect the DVD to TV via HDMI input.
32
Downloaded From Disc-Player.com Toshiba Manuals
Notes
• If the Video out is not set to “HDMI”, you cannot select
the “HDMI Resolution”.
• When the picture mode is Sharp, Color or Contrast, HDMI
resolution cannot be set to 480p and 720p.
• Select the HDMI resolution according to the performance
of the connected TV.
JPEG Interval
1) Press SETUP button.
button to select Video.
2) Press /
3) Press button, then use the / button to select JPEG
Interval.
4) Press ENTER button, then use the / button to shift
and change the JPEG Interval.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Off:
Plays back one file at a time.
5 seconds: Plays back images in the form of a slide show
at 5 seconds interval.
10 seconds: Plays back images in the form of a slide show
at 10 seconds interval.
15 seconds: Plays back images in the form of a slide show
at 15 seconds interval.
Aspect Ratio
: 16 : 9
: Auto Fit
Video out
HDMI Resolution
: HDMI
Off
5 seconds
JPEG Interval
Picture Modes
10 seconds
15 seconds
Picture Modes
XDE is a trademark of Toshiba America Consumer
Products, L.L.C.
1) Press SETUP button.
2) Press /
button to select Video.
3) Press
button, then use the
/
button to select
Picture Modes.
4) Press ENTER button, then use the / button to select
picture mode (Sharp, Color, Contrast or Off).
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Sharp: Select this to make the picture sharper.
Color: Select this to make the picture sharper with
enhanced color.
Contrast: Select this to make the picture sharper with
bigger contrast.
Off: Select this to follow the original picture setting.
Aspect Ratio
: 16 : 9
: Auto Fit
Video out
HDMI Resolution
: HDMI
Sharp
Color
JPEG Interval
Contrast
Picture Modes
Off
Night Mode
DVD
Night mode is equivalent to Dynamic Range Compress.
When it is On, it reduces the variations between loud and
soft sounds in audio output. You can still hear softer sounds
and dialog even in very low volume.
1) Press SETUP button.
2) Press /
button to select Audio.
3) Press button, then use the / button to select Night
Mode.
4) Press ENTER button, then use the / button to select
On or Off mode.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Notes
• Picture Modes is only available when the Video out is set to
“HDMI” and outputs via HDMI.
• If HDMI resolution is set to 480p or 720p, the Picture Modes
cannot be activated.
Off
On
: PCM
: Off
Note
Night mode is Dynamic Range Control (DRC) option for
analog audio output.
Rating
Parental control
Digital Output
Selects the output sound format corresponding to your
system connection.
1) Press SETUP button.
2) Press /
button to select Audio.
button, then use the
/
button to select
3) Press
Digital Output.
4) Press ENTER button, then use the / button to select
the output sound format (Off, PCM or Bitstream).
5) P r e s s E N T E R
button.
Off
6) P r e s s S E T U P
PCM
button to exit the
Bitstream
menu.
PCM: Select when
connected to a Multichannel digital stereo
amplifier. The DVD
player outputs sound
in the PCM stereo
format when you play a DVD recorded on the Dolby Digital,
MPEG1 or MPEG2 recording system.
Bitstream: Disc audio raw data will be output. Select
“Bitstream” if your amplifier supports “DTS”.
Off: To disable Digital Output.
Notes
• When you make a connection to a TV, Dolby Surround
Pro Logic or stereo system via the analog audio jacks,
select “PCM” or “Bitstream”.
• If this DVD player is connected to a TV using HDMI,
make sure to select “PCM”.
: 8. Adult
Set Password
Parental control
DVD
DVDs equipped with the password function are rated according to
their content. The contents allowed by a parental lock level and the
way a DVD can be controlled may vary from disc to disc.
For example, if the disc allowed, you could edit out violent scenes
unsuitable for children and replace them with more suitable
scenes, or you could lock out playback of the disc altogether.
• DVDs may or may not respond to the parental lock settings.
This is not a defect in the DVD player. Make sure this function
works with your DVDs.
1) Press SETUP button.
2) Press
/
to
Parental control
: 8. Adult
select Rating.
Set Password
3) Press button to
select Parental
Enter Password:
control, then
press ENTER
button.
“Enter Password”
screen will
appear.
33
Downloaded From Disc-Player.com Toshiba Manuals
Function setup
Audio
: PCM
Function setup
Customizing the Function Settings (continued)
Setting details
4) Press “8888” using number buttons. (Please note, this is
presetting password of this unit). Then press ENTER.
Press ENTER again to list the parental level.
The parental lock level is equivalent to the following
ratings:
Level 5: PG-R
Level 1: Kid Safe
Level 6: R
Level 2: G
Level 7: NC-17
Level 3: PG
Level 8: Adult
Level 4: PG-13
5) Press / to select the rating from 1 to 8. Rating one
(1) has the most restrictions while rating eight (8) can
virtually playback all DVD software.
6) Press OPEN/CLOSE button to activate the Parental
Level setting.
If the DVD has been designed to temporarily cancel
the Parental Level, the screen will change depending
on which disc is played. If you select “YES” with the
ENTER button, “Enter Password” screen will appear.
Input the 4-digit password as you have set then followed
by ENTER button and playback will start. If “NO” is
selected, press the OPEN/CLOSE to remove the
disc.
Notes
• If you input a wrong password, press CLEAR button and
re-enter your 4-digit password again.
• You cannot play DVDs rated higher than the level you
selected unless you cancel the parental lock function.
Set Password
DVD
New Password can be set to replace the default
password.
1) Press SETUP button.
2) Press / button to select Rating.
3) Press button, then use the / button to select Set
Password.
4) Press ENTER button. “Enter Password” screen will
appear.
5) Press the number buttons to input the current password
(If the password has not been set yet after you purchase
this unit, it is “8888”). Then press ENTER.
6) Press ENTER button again, “New Password” screen
will appear. Press the number buttons to input the new
password.
7) Press ENTER button, “Confirm Password” screen
will appear. Enter the same password again for
confirmation.
8) Press ENTER button. Now your new password has been
set. Be sure to remember this number!
If you forget the password, you can erase your
current password by pressing number button
8 on the remote control four times, then press
ENTER button to confirm the setting.
PASSWORD: 8888
34
Downloaded From Disc-Player.com Toshiba Manuals
Misc
Screen saver
: On
HDMI Control
: Off
Use Default Settings
If you want to return the initial language setting such as
Language, Video, Audio and etc. to the factory default, do
the following:
1) Press SETUP button.
2) Press / button to select Misc.
3) Press button to select Use Default Settings, then
press ENTER button.
/
4) P r e s s
button to select
“Yes”, then press
Screen saver
: On
ENTER button.
The original
Do you want to use default setting?
setting will be
restored.
Note
When you reset the DVD player to the factory default, the
DVD player will take 3-5 seconds to reset.
DivX® Registration
Some DivX® Video-On-Demand files required
registration code, please get the code of your DVD
player as follow:
1) Press SETUP button.
2) Press / button to select Misc.
3) Press button, then use the / button to select
DivX Registration.
4) Press ENTER button, your registration code will be
shown.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Screen saver
: On
DivX R Video On Demand
Your registration code is :
Note
This registration code is for DivX® Video-On-Demand only.
Do not apply this code for other applications or websites.
Functions available for the HDMI Control
Screen saver
To turn on or off the screen saver (screen protection to
prevent image burn).
1) Press SETUP button.
2) Press / button to select Misc.
3) Press button, then use the / button to select
Screen saver.
4) Press ENTER button, then use the / button to
select the On or Off mode.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Off
HDMI Control
: Off
On
When the operations with following button of this unit’s
remote control are performed, the TV will automatically
switch to appropriate input channel.
Button for one touch play: [PLAY] (make sure a disc is
inserted.)
• System information
Get & Set Menu Language:
This unit recognizes the OSD languages set for the TV
and automatically set the same language as the player
menu language (OSD menu language) for this unit.
Power off:
When you turn the TV off, this unit will automatically
turn off.
Function setup
Screen saver
• One touch play
Receiving operational signal from TV’s Remote:
You can operate this unit with TV’s remote control.
Check your TV owner’s manual for details.
Notes
• This function may not work properly depending on the
Note
When you leave the unit in DVD stop mode for approximately
2 minutes, the screen saver of the DVD player automatically
appears if you set the Screen saver to On mode. To turn
off the screen saver, press the PLAY button.
TV you are connecting.
• If the Video out is not set to “HDMI”, HDMI Control will not
work.
• Other components must be compatible with HDMI Control
in order to use this function.
HDMI Control: REGZA-LINK®
REGZA-LINK is a registered trademark of Toshiba
Corporation.
You can control this DVD unit from TV’s remote which is
connected via HDMI cable.
1) Press SETUP button.
2) Press / button to select Misc.
3) Press button, then use the / button to select
HDMI Control.
4) Press ENTER button, then use the / button to
select the On or Off mode.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Screen saver
HDMI Control
: On
Off
On
Off: To deactivate HDMI Control.
On: To activate HDMI Control.
35
Downloaded From Disc-Player.com Toshiba Manuals
Others
Table of Languages
Table of languages and their abbreviations
Abbreviation
–––
CHI (ZH)
DUT (NL)
ENG (EN)
FRE (FR)
GER (DE)
ITA (IT)
JPN (JA)
KOR (KO)
MAY (MS)
SPA (ES)
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DZ
EL
EO
ET
EU
FA
FI
FJ
FO
FY
GA
GD
GL
Language
No alternate
language
Chinese
Dutch
English
French
German
Italian
Japanese
Korean
Malay
Spanish
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Belorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
Bhutani
Greek
Esperanto
Estonian
Basque
Persian
Finnish
Fiji
Faroese
Frisian
Irish
Scottish Gaelic
Galician
36
Downloaded From Disc-Player.com Toshiba Manuals
Abbreviation
GN
GU
HA
HI
HR
HU
HY
IA
IE
IK
IN
IS
IW
JI
JW
KA
KK
KL
KM
KN
KS
KU
KY
LA
LN
LO
LT
LV
MG
MI
MK
ML
MN
MO
MR
MT
MY
NA
NE
NO
OC
OM
OR
PA
PL
PS
Language
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laotian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Maltese
Burmese
Nauru
Nepali
Norwegian
Occitan
(Afan) Oromo
Oriya
Panjabi
Polish
Pashto, Pushto
Abbreviation
PT
QU
RM
RN
RO
RU
RW
SA
SD
SG
SH
SI
SK
SL
SM
SN
SO
SQ
SR
SS
ST
SU
SV
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZU
Language
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Rumanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sango
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tongan
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Yoruba
Zulu
Others
Before Calling Service Personnel
Check the following guide for the possible cause of a problem before contacting service.
Symptoms and correction
Symptom
Cause
Correction
Page
11-12
No power.
• The power plug is disconnected.
• Connect the power plug securely into the wall outlet.
The DVD player turned off
by itself.
• The automatic power off function turned the
unit off.
• Press the PLAY button.
16
No picture or abnormal color
(pinkish, greenish, etc.).
• The TV is not set to receive DVD signal
output.
• Select the appropriate video input mode on the TV
so the picture from the DVD player appears on the
TV screen.
16
• The video/HDMI cable is not connected
securely.
• Connect the video/HDMI cable securely into the
appropriate jacks.
11-12
No sound.
Brightness is unstable or
noises are present in the
playback pictures.
• Select the correct Video out setting.
• Wrong connection.
• Check the connection.
11-12
• P-Scan mode is selected on a TV equipped
with component video input jacks but does
not support progressive scan.
• Turn off P-Scan mode.
12
• The equipment connected with the audio cable
is not set to receive DVD signal output.
• Select the correct input mode of the audio receiver
so you can listen to the sound from the DVD player.
16
• The audio cable is not connected securely.
• Connect the audio cable securely into the
appropriate jacks.
11-15
• The audio receiver or TV is turned off.
• Turn on the equipment connected with the audio
cable.
16
• The setting of output sound format is
incorrect.
• Select the proper audio setting.
33
• The disc is dirty.
• Remove the disc and clean it.
5
• It is in fast forward or fast reverse playback.
• Sometimes a small amount of picture distortion
may appear. This is not a malfunction.
-
• The effect of copy protection.
• Connect the DVD player directly to the TV. Avoid
connecting the DVD player to a VCR or TV/VCR
combination.
11
16
• No disc is inserted.
• Insert a disc.
• An unplayable disc is inserted.
• Insert a playable disc. (Check the disc type and
color system.)
• The disc is placed upside down.
• Place the disc with the playback side down.
16
• The disc is not placed within the guide.
• Place the disc correctly inside the guide on the
disc tray.
16
• The disc is dirty.
• Clean the disc.
• The parental lock function is set.
• Cancel the parental lock function or change the
parental lock level.
33
Playback does not follow
the course of the disc’s
program.
• It is in the mode of repeat playback, memory
playback, etc.
• These operations may prevent a proper progress
of the contents.
-
Buttons do not work.
• Power supply fluctuations or other abnormalities
such as static electricity may interrupt correct
operations.
• Press and hold the ON/STANDBY button on the
front panel for more than about 3 seconds. The
DVD player turns off. Press the button again to turn
it on. If the buttons still do not work, disconnect
the power plug and insert it into the wall outlet
again.
-
The remote control does not
work properly.
• The remote control is not pointed at the remote
sensor of the DVD player.
• Point the remote control at the remote sensor of
the DVD player.
10
• The remote control is too far from the DVD
player.
• Operate the remote control within about 7 m.
10
• The batteries in the remote control are
exhausted.
• Replace the batteries with new ones.
10
The DVD player does not
start playback.
Others
The playback picture has occasional distortion.
32
• Mismatch setting between TV and this unit.
6
5
37
Downloaded From Disc-Player.com Toshiba Manuals
Others
Specifications
DVD player / outputs / supplied accessories
DVD Player
Power supply
120 V AC, 60 Hz
Power consumption
14 W (standby: less than 1.0W)
Mass
1.34 kg
External dimensions
430 x 41 x 203 mm (W/H/D)
Signal system
NTSC
Laser
Semiconductor laser, wavelength 650/780 nm
Frequency range
DVD linear sound : 48 kHz sampling 4 Hz to 22 kHz
96 kHz sampling 4 Hz to 44 kHz
Signal-to-noise ratio
More than 93 dB
Audio dynamic range
More than 80 dB
Harmonic distortion
Less than 0.05 %
Wow and flutter
Below measurable level (less than ±0.001 % (W.PEAK))
Operating conditions
Temperature: 5 °C to 35 °C, Operation status: Horizontal
Outputs
Video output
1.0 V (p-p), 75 Ω, negative sync., pin jack x 1
S-Video output
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x 1
(C) 0.286 V (p-p), 75 Ω
Component video output
(Y) 1.0 V (p-p), 75 Ω, negative sync., pin jack x 1
(PB)/(PR) 0.7 V (p-p), 75 Ω, pin jack x 2
Audio output (COAXIAL DIGITAL)
0.5V (p-p), 75 Ω, pin jack x 1
Audio output (ANALOG)
2.0 V (rms), 2.2k Ω, pin jacks (L, R) x 1
Audio output (OPTICAL DIGITAL)
Optical connector x 1
HDMI output
19 pin
Supplied Accessories
Audio/video cable ...................................................1
Remote control (SE-R0361) ...................................1
Batteries (R03/AAA) ...............................................2
• This model complies with the above specifications.
• Designs and specifications are subject to change without notice.
• This model may not be compatible with features and/or specifications that may be added in the future.
38
Downloaded From Disc-Player.com Toshiba Manuals
Others
Limited United States Warranty
Digital Audio Video (“DAV”) Product - Exchange Warranty
Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties to original consumers in the United
States.
THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING
THIS DAV PRODUCT AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR
TRANSFEREE.
DAV PRODUCTS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT
LIMITATION, CANADA AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES.
DAV PRODUCTS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA AND
MEXICO, AND USED IN THE U.S.A., ARE NOT COVERED BY THESE WARRANTIES.
Limited Warranty
TACP warrants this DAV Product and its parts against defects in
materials or workmanship for a period of ninety (90) days after
the date of original retail purchase.
DURING THIS PERIOD,TACP WILL EXCHANGE A DEFECTIVE
DAV PRODUCT WITH A NEW OR REFURBISHED DAV
PRODUCT WITHOUT CHARGE TO YOU. DURING THE
PERIOD THAT COMMENCES ON THE DATE THAT IS NINETY
ONE (91) DAYS AFTER THE DATE OF ORIGINAL RETAIL
PURCHASE AND ENDS ON THE DATE THAT IS THREE
HUNDRED SIXTY FIVE (365) DAYS AFTER THE DATE OF
ORIGINAL RETAIL PURCHASE, TACP WILL EXCHANGE A
DEFECTIVE DAV PRODUCT WITH A NEW OR REFURBISHED
DAV PRODUCT FOR A FEE.
Rental Units
Commercial Units
DAV Products sold and used for commercial purposes have a
limited warranty for all parts and labor, which warranty begins
on the date of original retail purchase and ends on the date that
is ninety (90) days thereafter.
How to Obtain Warranty Services
If, after following all of the operating instructions in this manual
and checking the section “Before Calling Service Personnel,” you
find that service is needed:
(1) For instructions on how to obtain warranty service for
your DAV Product under the TACP DAV Product Warranty
Exchange Program, contact TACP’s Consumer Solutions
Center toll free at 1-800-631-3811.
(2) You must include the original bill of sale (or a copy of the
original bill of sale) or other proof of purchase along with
the entire DAV Product when sending the DAV Product to
the TACP Warranty Exchange Center specified by TACP’s
Consumer Solutions Center. You are responsible for all
inbound transportation and insurance charges for the DAV
Product to the TACP Warranty Exchange Center.
For additional information, visit TACP’s website: www.tacp.
toshiba.com
Owner’s Manual and Product Registration Card
ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE
OF THE U.S.A., INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF
THE LIMITED WARRANTIES SET FORTH ABOVE. WITH THE
EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW
OF ANY STATE OF THE U.S.A. AS HEREBY LIMITED, THE
FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL
OTHER WARRANTIES, GUARANTEES, AGREEMENTS, AND
OF ALL OTHER WARRANTIES, GUARANTEES, AGREEMENTS,
AND OR REPLACEMENT OF ANY PARTS. IN NO EVENT SHALL
TACP BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL
Your Responsibility
DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOST PROFITS,
THE ABOVE WARRANTIES ARE SUBJECT TO FOLLOWING BUSINESS INTERRUPTION, OR MODIFICATION OR ERASURE
CONDITIONS:
OF RECORDED DATA CAUSED BY USE, MISUSE OR INABILITY
(1) You must retain your bill of sale or provide other proof of TO USE THIS DAV PRODUCT).
Read this owner’s manual thoroughly before operating this DAV
Product. Complete and mail the enclosed product registration
card or register your DAV Product on-line at www.tacp.toshiba.
com/service as soon as possible. By registering your DAV
Product you will enable TACP to bring you new products
specifically designed to meet your needs and help us to contact
you in the unlikely event a safety notification is required under
the U.S. Consumer Product Safety Act. Failure to complete
and return the product registration card does not diminish your
warranty rights.
purchase.
(2) All warranty servicing of this DAV Product must be made
pursuant to the TACP DAV Product Warranty Exchange
Program.
(3) The warranties from TACP are effective only if the DAV
Product is purchased and operated in the Continental U.S.A.
or Puerto Rico.
(4) Labor service charges for set installation, setup, adjustment
of customer controls, and installation or repair of antenna
systems are not covered by this warranty. Reception
problems caused by inadequate antenna systems are your
responsibility.
(5) Warranties extend only to defects in materials or workmanship
as limited above, and do not extend to any DAV Product or
parts that have been lost or discarded by you or to damage to
the DAV Product or parts caused by fires, misuse, accident,
No person, agent, distributor, dealer, or company is authorized
to change, modify, or extend the terms of these warranties in any
manner whatsoever. The time within which an action must be
commenced to enforce any obligation of TACP arising under the
warranty or under any statute or law of the United States or any
state thereof is hereby limited to ninety (90) days from the date you
discover, or should have discovered, the defect. This limitation does
not apply to implied warranties arising under state law.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND
YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM
STATE TO STATE IN THE U.S.A. SOME STATES OF THE U.S.A.
DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, WHEN AN ACTION MAY BE BROUGHT,
OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE PROVISIONS MAY
NOT APPLY TO YOU UNDER SUCH CIRCUMSTANCES.
39
Downloaded From Disc-Player.com Toshiba Manuals
Others
The warranty for DAV Product rental units begins on the date of
the first rental or thirty (30) days after the date of shipment to
the rental firm, whichever comes first.
Acts of God ( such as lightning or fluctuations in electric
power), improper installation, improper maintenance, or
use in violation of instructions furnished by TACP; use or
malfunction through simultaneous use of this DAV Product
and connected equipment; or to units that have been modified
or had the serial number removed, altered, defaced, or
rendered illegible.
811-E60091W010
Downloaded From Disc-Player.com Toshiba Manuals
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement