Alcatel-Lucent Advanced Reflexes Owner Manual

Alcatel OmniPCX 4400
User Guide
Advanced
REFLEXESÔ Alcatel OmniPCXÔ 4400
Your Advanced REFLEXESÔ terminal provides simple and quick access to all
of the services and features offered by your Alcatel OmniPCX 4400 Ô system.
This user guide is designed to give you:
•
•
•
a full description of your terminal
an alphabetical index of available services and features
a step-by-step guide explaining how to use these services
and features, separated into three sections:
• YOUR CALLS
• EASE OF USE
• IN YOUR ABSENCE
Your REFLEXESÔ terminal and your Alcatel OmniPCXÔ 4400 system provide
you with everything you need from a telephone system.
Name: ..............................................
Fax No.: ............................................
E-mail address: ..................................
Tel. No.:
................................
Mobile No.: ................................
PWT No.: ................................
1
References used in the documentation
The action "Press" is represented by:
Display (soft) keys are represented by:
.
Displ
.
Pre-programmed and user-programmable keys are represented by:
,
.
, etc., indicate use of the Navigator key.
The standard or site-specific feature codes are listed in the Table of Codes brochure,
which should be consulted when the text indicates “...See Table of Codes.”
FEATURE
Standard
Code
Last caller call back
Site
Code
*69
Programming the keys to customize your own terminal is described in “Personalizing
your terminal.” You will also find a list of the available programmable features in this
section.
2
System information
The availability of some of the features described in this guide depends upon
your system configuration. For more information regarding your system
configuration, contact your telephone system manager.
Station information
(1) Your terminal allows “on-hook” dialing; this means you can dial a call even before
you pick up the handset.
(2) Your terminal can be set up as a multi-line station (two or more line keys) or as a
single line station (integrated line service with no line keys). This user guide is designed
for multi-line station users. For information on single line service configurations, contact
your system vendor.
3
4
Getting to know your
REFLEXESTM Advanced TERMINAL
i
5
Display, Display Keys, and Navigator
Display: your terminal display consists of two lines for text and can show several pages
of information - depending upon its state:
Terminal in idle state:
1st line: information on the status of the terminal, including date and time.
2nd line (and also first line for the next four pages): key operations or features that
you can program yourself.
Terminal is involved in a call:
1st line: information about your party and the current call
2nd line: features accessible at the moment.
The green
LED flashes to
indicate that
one or more
messages
have been
received.
Navigator: for moving between
display pages or between
display lines.
6
Display keys: 5 soft keys
that change dynamically to
offer context-appropriate
system features.
Navigation Concept
The Navigator is used to select directory pages, or available features, or to scroll
through the pages appearing on the two-line display (which, in turn, designates the
feature for each display key).
If you select the upper line, indicators will flash (at the left end and right end of the line)
to indicate that the line is active. If you press a display key (or wait a few seconds),
the lower line automatically becomes active again.
Previous
page
Upper line
David
Bob
Active line indicators
Frank
.....
JackJ
Recptn
Judy
G@Ofc
CM
G@Hm
Short names (mnemonics)
entered by user.
Lower line
Next
page
7
Soft keys
correspond
to the
display’s
active line.
Keys and icons
Your multi-line terminal has 8 pre-programmed station keys and 16 station keys
programmable by you (the user) or your installation technician. These 24 keys are
used to:
• determine the status of a terminal
• call an internal or external number directly
• access a feature.
Line keys
LINE 1
LINE 2
Programmable
keys
ISDN
CALL
LOG
HOLD
FORWARD
FORWARD
REDIAL
REDIAL
STORE #
Feature icons
Call icons
Pre-programmed keys
8
The following icons are associated with the keys:
Call icons
Feature icons
Call ringing (flashing).
Feature active.
Call in progress.
Feature requiring action.
Call on hold.
Terminal or line busy
(supervision).
Call on common hold.
Pre-programmed station keys are used to:
LINE
: select a line or operate a feature during a call
HOLD
: put a call on hold
FORWARD
: forward calls to another terminal
: access message services
CALL LOG
REDIAL
STORE #
: review the list of unanswered identified external calls
: automatically redial the last number dialed
: temporarily store a number
9
Installing the label on the terminal
A printed label is supplied with the terminal. This should be placed under the key cover
for each block of keys.
 Insert flat blade into the slot (1 slot for
each block of keys).
‚ Raise the cover.
ƒ Slide the printed label into position.
„ Replace the cover.
Fixed keys
The fixed keys correspond to frequently used features.
Menu: to enter access or programming modes
and to display information.
Eric
RobHR . . . . . .
ISHelp . . . . . . FacDsk
Menu
10
VP
Tec
Audio Keys
Mute: to temporarily turn
off your station mic,
during your call
or
to leave your mic on
(“hot”) to answer internal
calls automatically without having to lift the
handset (IInterphone).
To reduce station
speaker handset
(receiver) or ringer
volume.
Listen: Station
speaker - to share
a conversation
End: to terminate a
call or programming.
END
Mute
Listen
Speaker
Speaker : for handsfree operation.
To increase station
speaker handset
(receiver) or ringer
volume.
Alphabetic Keypad
The keypad is used for text message
features, the "Dial by name" feature,
and for programming.
11
C O N T E N T S
YOUR CALLS
Making an external call ................................................................................18
Making an internal call .................................................................................18
Calling the attendant ....................................................................................19
Consultation Call .........................................................................................19
Calling an associate (or other key individual) ...................................................20
Answering a call..........................................................................................20
Answering other calls during a conversation ....................................................20
Transferring a call........................................................................................21
Putting a call on hold ...................................................................................22
If you forget or “lose” a call on hold ..............................................................22
Switching between calls (Broker Calls).............................................................22
Picking up calls ringing at another terminal ......................................................23
To pick up a call ringing at another terminal (in your pickup group) ...................23
To pick up a call ringing at another terminal (not in the pickup group) ................23
Calling - using your Advanced personal directory..........................................23
Calling - using a programmed key .................................................................24
Talking with two other people at the same time (Conference Call) .......................24
Parking a call..............................................................................................25
Requesting a callback (from an idle or busy station)..........................................26
Camping on an internal party who is busy ......................................................26
Answering a night service bell .......................................................................27
Entering a scheduled (Meet-me) conference......................................................27
12
Transferring a caller into the conference ..........................................................28
Calling a number - using the system directory ..................................................28
Barge-in to an internal conversation ................................................................29
Privacy/Protection against barge-in ................................................................29
Contacting a party whose calls are being forwarded or blocked........................29
Calling a party through the station speaker......................................................30
Interphone mode and Hands-free ...................................................................30
Creating, modifying or reviewing your intercom list ...........................................31
Hunt Groups................................................................................................31
Temporarily leaving your hunt group ..............................................................31
Returning to your hunt group .........................................................................32
Putting a call on common hold .......................................................................32
Sending a text message to an internal party ....................................................33
Sending a text message (at the beginning of your call)......................................34
Sending a text message to an external party ..................................................34
Calling an internal party on his pager ............................................................34
Leaving a direct voice message .....................................................................35
Dial-by-Name..............................................................................................35
EASE OF USE
Personalizing your Advanced terminal ..........................................................38
Programming a feature (or number) on a programmable (or display) key ............39
Feature groups ............................................................................................39
Group 1: Forwarding Services.......................................................................40
Group 2: Locking/DND ................................................................................40
Group 3: Call Pickup Services .......................................................................41
13
Group 4: Associate Services..........................................................................41
Group 5: Consultation & Callbacks ................................................................41
Group 6: Appointment Reminder ....................................................................41
Group 7: Voice Mail Services........................................................................42
Group 8: Additional Services ........................................................................42
Group 9: Paging Services .............................................................................42
Group 10: Transparency ..............................................................................42
Programming your personal code...................................................................43
Choosing the display language ......................................................................43
Making or taking a call without lifting the handset (Hands-free) ..........................44
Programming your personal directory .............................................................44
Entry Corrections ..........................................................................................45
Switching on the station speaker during a call..................................................45
Adjusting station speaker volume during a call .................................................45
Adjusting handset volume during a call ...........................................................46
Switching off the microphone (mute) ................................................................46
Calling the last number dialed (Redial) ............................................................46
Adjusting the ringer (melody and volume) ........................................................46
Adjusting the display viewing angle................................................................47
Changing the Associate number .....................................................................48
Identifying the terminal ..................................................................................48
Setting an appointment reminder ....................................................................48
Do not disturb .............................................................................................49
Forwarding calls when you are busy ..............................................................50
Saving a number, to call it later.....................................................................51
Hiding your identity ......................................................................................51
14
Hiding your caller's identity............................................................................52
Allocating calls to customer account codes.......................................................52
Determining the cost of your last external call...................................................52
Calling an external "private" number .............................................................53
IN YOUR ABSENCE
Forwarding calls to another number (Forwarding - immediate) ...........................56
Overflowing calls to an associate number........................................................56
Forward on no answer .................................................................................57
Forward on busy or no answer .....................................................................58
Forwarding your calls from a different terminal (Remote Forward) .......................58
Forwarding your calls from the terminal you are on (Follow Me).........................59
Forwarding calls from any terminal within the company.....................................59
Forwarding calls to a recorded message (voice mail)........................................60
Canceling Forwarding .................................................................................60
To cancel forwarding from your own terminal ..................................................60
To cancel forwarding from the internal terminal that is receiving your forwarding ..61
To cancel forwarding from any other terminal within the company ......................61
Selective forwarding .....................................................................................61
Checking messages ......................................................................................62
Accessing and answering callback requests .....................................................62
Leaving a text message (“I am away”) for internal callers..................................63
Reading internal text messages left in your absence ..........................................64
Reviewing the list of internal calls....................................................................65
Checking voice mail messages .......................................................................66
Locking your terminal....................................................................................66
15
Forwarding your calls to your personal pager .................................................66
Replying when your personal pager sounds.....................................................67
Calling back the last internal caller whose call went unanswered........................68
Reviewing the log of external calls..................................................................68
GLOSSARY .................................................................................................69
INDEX ........................................................................................................73
Care of equipment .......................................................................................76
Compliance .................................................................................................76
16
C A L L S
YOUR
CALLS
17
Making an external call
To make an external call:
Dial 9 (or lift the handset and dial 9); then dial the number you wish to reach.
The display will show the number you dialed and the icon associated with the
line key will indicate the status of your call:
Note: 9 is the default code for obtaining an outside line. You can determine what code to
dial to access features by consulting the Table of Codes, or you can use Guide mode:
Call
Access
Menu
followed by
and
to display system call codes.
For more information on use of the MENU key to access Feature Groups, see the section
“Feature Groups.”
Making an internal call
To make an internal call:
Lift the handset and dial the number you want directly (or use a dialing feature,
e.g.: call - using your personal directory). The display will show the name of the
person you called, and the icon associated with the line key will indicate the
status of your call.If there is no answer, you can choose one of the options
indicated on the display. Press the display key corresponding to your choice:
•
•
CallAn
CallBk
to announce yourself through your called party’s station speaker
to ask the person to return you call - “call me”
18
•
•
Text
Voice
PWT
to send a text message
to send voice mail (in systems with integrated voice mail)
C A L L S
•
to call someone on their personal wireless terminal
Calling the attendant
To call the attendant: dial 0.
Note: 0 is the default number code for the "Attendant call" feature.
Consultation Call
During a conversation with either an internal or an external caller, you can call a
second person. This is known as a “Consultation Call.”
To make this 2nd call:
(1)
LINE
(or a free line key)
Your first call will automatically be put on hold ( icon:
).
(2) Dial your second call and you will connect to your second party.
To cancel the second and return to the first call,
Note: If you press the wrong button, hang up.
reconnected to your first party.
19
END
or
END
.
Your phone will ring and you will be
Calling an associate (or other key individual)
Each terminal may have another line linked to it as an “associate.”
To call the associate line quickly:
Assoc
or dial the code for the "Associate call" feature.
Note: Availability of the “Associate Call” feature depends upon your system configuration.
Answering a call
When your terminal rings - your display will indicate the caller's number (external
call - when caller information is provided) or name (internal call). To answer: lift
Speaker
the handset or
for “hands-free.” On internal calls, the calling party
station name is displayed. When you answer the call, the calling station number
will also be displayed.
Note: You can answer internal calls immediately and “Hands-free” if your station is in
“Interphone” mode.
Answering other calls during a conversation
During a call, you can answer a second call. When a second person calls, you
hear a beep and see a flashing line key (multi-line terminal). The new call rings
and your display shows caller information until you answer or the call is forwarded,
or the caller sets camp-on.
If you want to answer the second call, press the flashing line key.
The first call will automatically be placed on hold.
20
If you hang up without taking the second call (the call which is waiting for you),
your telephone will automatically ring again.
If several calls (3 or more) arrive simultaneously, only the last one is displayed. To
Menu
determine the identity of waiting callers
and press the flashing line key
for each call.
To end this review:
END
CmpOnC
Note: You can prevent calls from being camped on when your line is busy:
to initiate “Camp-on” control. Outside calls will be directed to the attendant. This feature
remains in effect until cancelled.
To cancel this restriction,
CampOn
Transferring a call
If you are in the middle of a conversation, you may want to transfer your party to
another terminal.
To transfer a call:
(1)
LINE
(to make a second, or consultation call), and when the second
party answers, advise that station user that you are transferring a call to them.
(2)
Transf
to complete the transfer
21
C A L L S
To recover the first call, press the corresponding line key.
Notes : If you prefer, you can transfer the call without waiting to see if the second party
answers (even if their line is busy).
Depending upon your system’s trunking service, transferring calls between two
outside lines may not be possible.
Putting a call on hold
If you are in conversation with an internal or external party, you may want to put
your party on hold, and be able to retrieve the call later at the same terminal.
To put a call on hold:
HOLD
(or press the line key for a new call).
To return to the first caller (on hold), press the line key for that call.
If you forget or “lose” a call on hold
If you should hang up while someone is on hold, the line key icon relating to the
line key
will indicate this and your phone will ring. To recover the call,
pick up the handset and press the line key.
Switching between calls (Broker Calls)
If you are in conversation with one caller and have another caller on hold, you can
switch back and forth between them. This is sometimes known as a “broker” call.
22
Picking up calls ringing at other terminals
To pick up a call ringing at another terminal (in your call pickup group):
Dial the code for the "Group call pickup" feature, or
GrpPic
or
Access the service feature group "Call pickup services"to apply GrpPic.
To pick up a call ringing at another terminal (not in the pickup group):
(1) Dial the code for the "Direct call pickup" feature, or
DirPic
or
Access the service feature group "Call pickup services"to apply DirPic.
(2) Dial the number of the ringing telephone you wish to answer.
Calling - using your
Advanced personal directory
Your terminal displays several lines of mnemonics (short, easy-to-remember names),
one for each number that you have programmed into your directory .
To go to the next display line, use the Navigator.
23
C A L L S
To switch between calls:
Press the line keys relating to your call. The number for each party will be
displayed.
To call - using your
Advanced personal directory:
Press the display key
Displ
you have programmed for the number you want.
Note: For information on how to program numbers, see Programming your personal directory.
Calling - using a programmed station key
Programmable keys on your terminal
external parties, or to access features.
may be assigned to dial internal or
To call - using a programmed key:
Lift the handset and/or press the programmed key of your choice. The call will be
made automatically, and the display screen shows the number being called.
Note: Programming of keys for speed dialing depends upon your system configuration.
Talking with two other people, internal and/or external, at the same time
(Conference Call)
When you begin a call to a second party, the first party is placed on hold. If you
want to talk with both of them at the same time (3-way conference):
To cancel the conference, and recover the first call:
The second call will be terminated.
Conf
Conf
Note: In a typical terminal configuration, if you hang up during a conference, the other two
parties will remain connected (this may occur even if both are on outside calls).
24
You can “park” an external call in order to retrieve the call at a different terminal.
To park a call:
(1) During the call,
Park
(2) Per the voice guide, dial the station number of the terminal on which you want
to take the call - the call is automatically parked, and your caller hears a hold
signal.
Note: If you hang up without specifying a destination, the parked call remains at the original
station, and can be recovered using the “Park Call/Retrieve” feature in the normal fashion at
the original station (or at any other station within the system).
To recover your parked call at the destination station:
Enter the code for the "Park Call/retrieve" feature,
or
Access the service feature group "Call pickup services" and apply Parked.
To recover your parked call at any other station in the system:
(1) Enter the code for the "Park Call/retrieve" feature,
or
Access the service feature group "Call pickup services" and apply Parked.
(2) Dial the extension number where the call was parked.
Note: If a call is parked for more than the predefined period of time, it is automatically sent
to the attendant or other designated number within the system.
25
C A L L S
Parking a call
Requesting a callback (from idle or busy stations)
When you call an internal terminal and your party does not answer (line rings) or
is busy (indicated by the voice guide or busy tone and display), you can leave a
callback request.
To request a callback:
(1)
CallBk
- the display will show that the callback feature is in effect.
(2) Replace the handset, and you will be called back when your party responds
to your callback request (or automatically when the busy line is free).
To cancel the automatic callback request (all lines are busy), dial the number a
second time, and then hang up.
Camp-on an internal party who is busy
If you call an internal terminal and all of its lines are busy, the voice guide (or busy
tone) and station display will inform you of this. At this point you have several
options, including “Camp-on” - which allows you to wait and have your call ring
through as soon as your party finishes their call.
To camp-on a busy internal line:
CampOn
and wait (do not hang up).
As soon as the line you are calling becomes available, your call rings at the station.
26
When the attendant is away, all internal or external calls to the attendant may be
offered to extensions for answering, as determined by the system management in
effect.
To answer a night service call:
Dial the code for the "Night service answering" feature, or
NSBell
or
Access the service feature group "Call pickup services" to apply NSBell.
Entering a scheduled (Meet-me) conference
At a predetermined time, you can join in a telephone conference of up to 29 people
(including yourself). The participants may be internal and external (depending
upon your system configuration). A confidential access code will be provided to
you in advance by the individual arranging the conference. The number of digits
required in the meeting code (default: four digits) is determined by your telephone
system manager.
To enter a programmed conference call:
(1) Enter the code for the "Meet-me conference" feature, or
Access the service feature group “Additional services” to apply MeetMe.
(2) Dial the confidential access code
(3) If you are the first to join the conference, you will hear a hold indication.
If not, you will join the conference and the display screen will show you
27
C A L L S
Answering a night service bell
how many people are taking part.
If there is no more room in the conference, you will hear the busy tone.
You can leave the conference at any time by hanging up.
Transferring a caller into the conference
External callers wishing to join the conference must be transferred into it, by an
internal station. You can introduce an external caller into the conference by using
the call transfer feature.
To transfer a caller into a conference (while on the line with your party):
LINE
and enter the code for the "Meet-me conference" feature.
Your caller will automatically be put on hold.
(2) Enter the confidential code for the conference.
(1)
(3)
Transf
, and press the station line key for the corresponding call, to
complete the transfer of your party into the conference.
Calling a number - using the system directory
Your terminal has access to a system “Speed dialing” directory of internal or
external numbers.
To call a number using the system list:
Dial the short code assigned to the number.
28
If you call an internal number and find it busy, you may be able to barge-in to the
conversation. You can only do this if you have authorization and if that terminal has
not set the““Privacy/Protection against barge-in"feature.
To barge-in to a call:
BargIn
(1) Dial the code for the "Barge-in" feature or
(2) Your entry into the conversation is indicated to the parties by a signal (and on
equipped stations, by the display).
Privacy/Protection against Barge-in
To set Privacy/Protection against Barge-In (prior to your call):
(1) Dial the code for the "Privacy/Protection against barge-in" feature, or
PrAgBn
or
Access the service feature group “Additional services” to apply PrAgBn.
(2) Dial the number you wish to call.
This protection is only in effect until you hang up.
Contacting a party whose calls are being forwarded or blocked
When your party has forwarded their line, and you still wish to reach this person:
Ovride
. If you prefer, you can send a text message or request a callback.
29
C A L L S
Barge-in to an internal conversation
• send a text message by:
• request a callback by:
Text
Callbk
and entering it on the keyboard, or
and your request will only be received at
your party’s terminal (it will not be forwarded).
Calling a party through the station speaker
If your internal party does not answer, you may (if you have the authority to do so)
enable his or her phone remotely, and announce yourself through the station
speaker.
To call through a party’s station speaker:
(1)
CallAn
or
dial the code for the "Call announcement" feature.
This connects you directly to that station’s speaker.
(2) Announce yourself to your party.
(3) To speak with you, your party can lift the handset or use “hands-free.”
Interphone mode and Hands-free
Interphone mode allows incoming internal calls to immediately connect to your
station, allowing you to answer calls without pressing the speaker key or lifting the
handset.
To set interphone mode:
Mute
- the corresponding LED flashes (red).
30
When your caller hangs up, your mic is deactivated, and interphone mode remains
in effect.
Notes: If the intercom group list is blank, any internal call can be received in interphone mode.
If the list contains assigned names, then interphone mode calls can only be received from the
named persons.
Creating, modifying, or reviewing your intercom list (max. 10 names):
Prog
, and
,
Follow the prompts displayed on the screen.
Menu
then
IntCom
Hunt groups
Your terminal may be a member of a hunt group. Hunt groups allow incoming
calls to be answered by the next available terminal in the hunt group sequence.
Note: You can always contact a specific terminal within the group directly by dialing its
individual number.
Temporarily leaving your hunt group:
Dial the code for the "Station group - exit" feature, or
31
C A L L S
When an internal party who is a member of your intercom group calls you, your
terminal rings (your mic is activated) and you are immediately connected on a
hands-free basis. As with regular calls, the caller’s identity is shown on the screen.
GrpOut
or
Access the service feature group “Additional services”. to apply GrpOut.
Note: You will continue receiving all calls dialed directly to your extension.
Returning to your hunt group:
Dial the code for the "Station group - entry" feature, or
GrpOut
or
Access the service feature group "Additional services" to apply GrpIn.
Putting a call on Common Hold
If you are a member of a station or hunt group, and you are in conversation with
a caller (internal or external party), you can put the call on common hold, allowing
you (or any member of the group) to retrieve the call by pressing the “Common
hold” key. (To do this you must have a key programmed with the "Common hold"
feature).
To use Common Hold:
(1) Press the key programmed: Common Hold (icon:
will light up solid)
(2) Press this key again to retrieve the call.
Common Hold is indicated to all other members of the group who have a common
32
Sending a text message to an internal party
To send a text message:
(1)
(2)
(3)
then
Send
Apply
Text
, then dial your party’s number - their name will be displayed.
and the system offers several message options. You can choose:
• FixMsg
: a fixed (predefined) message
• PrgMsg
: a partially-defined message you will complete (see below)
• MyMsg
: to fully compose a message, yourself (max. 127 characters)
• Back
: to return to previous menu
(4) Select your message type by pressing the corresponding key.
You may scroll through the available messages by using the display keys.
Apply
(5) After selecting, completing, or composing, send the message by:
.
The system confirms that your message has been sent (and offers you the
opportunity to send another message).
Examples of Programmed/Predefined messages
1. Please ring, URGENT
2. Please ring tomorrow
3. Meeting on ** / ** at ** : ** (*)
33
C A L L S
hold facility by the flashing
icon - and any one of them can then pick up this
call by using their common hold key.
4. Meeting in room * (*)
5. Call back on ... (*)
6. Ring "***" (*)
(* for you to complete, by using the keypad):
Sending a text message (at the beginning of your call):
You can send a message while waiting for your party to answer:
Text
and you can immediately choose a type of message:
fixed, programmed (pre-defined), or “my” messages (as indicated in the section
above).
Sending a text message to an external party
If available in your system, you can send a text message to an outside party during
an ISDN call. To do so:
Text
and proceed as indicated above.
Calling an internal party on a pager
If your party doesn’t answer, and you know the person has a “beeper” (radio
pager), you can page this person, to inform the person of your call:
Enter the "Paging request" feature code (see Table of Codes), or
Pager
- the system will confirm that the person is being paged.
You can also inform your party of your call, directly on their beeper, by entering
34
Option note: integration of a paging solution and a paging access arrangement depends
upon the configuration of your system.
Leaving a direct voice message
To directly leave a voice mail message (while your terminal is idle):
Voice
(1)
then
to enter the voice mail system.
(2) Follow the voice mail system instructions to leave your message.
Dial-By-Name
To call your party by name instead of by number:
(1) Search: Enter the first few letters of your party’s last name, their initials, or last
name and first name, on your alphabetic keypad. To perform the search, press
one of the following keys:
•
•
•
•
Name
Init
Cancel
Name&F
if you have entered (all or part of) the last name
if you have entered the initials
to cancel the operation
if you have entered the last name followed by the first name
35
C A L L S
the "Direct paging call" feature code (see Table of Codes), followed by your
party’s pager number. Your party can reply from any terminal in the company.
(2) Review Results:
If the search is unsuccessful, the system will display two options:
•
Modify
to modify your request.
Cancel
•
to cancel your request.
If the search is successful, the system will offer a name and number. If there are
several possibilities, it will show how many there are at the end of the line. For
example, 02/04 means that the name suggested is the second in a list of four.
You can scroll through the alternatives in a continuous loop to find the person you
are looking for:
•
•
(3) Call:
Next
Prev
to display the next name.
to display the previous name.
Call
to make the call, when the name you want is displayed.
36
EAS
U
37
E A S E O F
U S E
E OF
SE
Personalizing your
Advanced terminal
To help you when making everyday calls, you can pre-select certain features,
create a personal directory, and program the free keys.
Menu
To customize your phone,
to enter Guide Mode. The display will show
you the first level feature choices you have available:
• Access
: to enter Access Mode; for information on keys that are already
programmed and those that are free, and to activate features.
• Prog
: to enter Programming Mode; to customize your terminal (ringing
melody, feature keys, screen, associate line, personal access
code, directory, etc.)
WhoAmI
•
: to display the identity (name and number) of a terminal
•
Lang
: to select an alternate display language
•
Test
: to verify display and ringer are operating properly
Press the display key corresponding to one of these groups, and the system will
offer the features available within the context of that service Feature Group (see
detailed list). In general:
•
•
•
Back
Menu
END
: to return to the previous level within a menu
: to return to the main menu
: to exit
38
Programming a feature (or number) on a programmable (or display) key
After you have reviewed the service Feature Group options, you can proceed to
program a feature, or a number (or a feature and number) on a free key.
To program a key:
Servce
then
Next
to reach the feature group you want.
Apply
, press the display key for the feature you want, and
or, the telephone number you want to enter.
Apply
Feature Groups
When you select a feature, its title appears on the display, followed by the code
number allocated to the feature (see also the Table of Codes brochure). To activate
the feature, you can enter this code directly on the keypad. If a feature and its code
do not appear, it means that this feature is not available on your system. You can
also review and invoke features from any of the service feature groups without lifting
the handset.
39
E A S E O F
U S E
Keys
Prog
Menu
(1)
then
and
(2) Press a key to program (or re-program). Free keys may be in key rows or you
may use the Navigator to scroll through display pages to select a programmable
display position.
(3) Dial the feature code (from the Table of Codes), or
To access Feature Groups:
(1)
Menu
, then
Servce
Access
to enter Access Mode.
Next
(2) Then
(and
to reach specific feature groups.
as needed)
Group 1: Forwarding services
Immed
: Forward all calls (Call forwarding - immediate)
Busy
: Call forwarding when you are already on a call
(call forwarding on busy)
NoAns
: Call forwarding after ringing without answer
(call forwarding on no anwser)
ByNoA
: Call forwarding on busy/no answer
FwdOff
: Cancel call forwarding
RFwdof
: Cancel follow me
RemFwd
: Call forward programming from any station (follow me)
RfwdOf
: Remote forward cancellation from any station
Group 2: Set DND and Locking
Lock
: Station lock/unlock
DND
: Do not disturb
DNDSui
: DND Suite On/Off
Guide
: Voice Guide On/Off
MaskID
: Identity secrecy
DispID
: Display identity
40
CmpOnC
Plug
: Camp-on control
: Plug and Phone
Group 4: Associate services
Assoc
: Call associate
OvFlw
: Overflow on no answer
Busy
: Immediate call overflow on busy
NoAns
: Overflow on no answer and immediate call overflow on busy
OvflOf
: Cancel associated overflow
Group 5: Check / callback
LastCa
: Call back last caller
Charge
: Charging information
Alarm
: Alarm consultation
Group 6: Appointment reminder
Remind
: Set temporary appointment
RemOff
: Cancel appointment reminder
41
E A S E O F
U S E
Group 3: Call pickup services
GrpPic
: Call pickup - group
IndPic
: Call pickup - station
NSBell
: Call pickup - night answer
Parked
: Call park/retrieve
Hold
: Common hold
Group 7: Voice mail services
Voice
: Voice mail access
Check
: Voice mail review
Notify
: Notification of voice message arrival
MDepos
: Voice mail deposit
Record
: Conversation recording
Group 8: Additional services
PrAgBn
: Protection against barge-in
Prject
: Business account code
Subst
: Substitution
Grpin
: Hunt/Station group - entry
GrpOut
: Hunt/Station group - exit
SetOOS
: Set out of service for moving
MeetMe
: Meet-me conference
Z®UA
: Analog station behind Reflexes™ set
PLnSel
: Primary line selection on multinumber station
SlnSel
: Secondary line selection on multinumber station
Group 9: Paging services
Paging
: Paging answer
Pager
: Direct call to a paging device
Group 10:
Pulse
MFSend
Alpha
Transparency
: Pulse sending
: MF sending
: Alphanumeric or other paging connection
42
Programming your personal code
To choose or change your personal code:
(1) Dial the appropriate feature code for “PPassword - change”, or
Prog
Passwd
then
and
.
(2) Per the system prompt, dial your (default) or existing (old) personal code.
(3) Dial a new code; to confirm it, enter your new code again. Each digit of your
code is indicated by an asterisk (“****”).
Menu
END
.
Note: The default personal code for your terminal is 0000. Some configurations will require
your personal code for activating several of the features in the following material.
Choosing a display language
To select the display language:
(1)
and
Menu
Lang
The display screen will offer you several possibilities. For example:
English; French; Spanish; etc.
(2) Press the display for the language of your choice.
(3) Confirm your choice:
Cancel
or
to return to the language menu, or
Menu
END
Apply
to return to the main menu (Guide Mode), or
.
43
E A S E O F
U S E
(4)
Making or taking a call without lifting the handset (Hands-free)
Your terminal allows “on-hook” dialing; this means you can dial even before you
pick up the handset. Dial a number without lifting the handset, and you are
automatically in “hands-free” mode.
Speak straight towards the front of the phone. During the conversation, you can
lift the handset and continue without interruption.
To switch back into hands-free mode:
Speaker
To answer a call in hands-free mode:
and hang up the handset.
Speaker
Programming your personal directory
To program your personal “speed dialing” list:
(1)
Menu
then
Prog
Keys
and
(2) Press a display key or select a display key position to program.
(3) Enter the number to be programmed (if it is an external number, include “9”).
(4)
Apply
- the system will prompt you to enter a short name (mnemonic) to
display for this number.
(5) On the alphanumeric keypad, enter your party’s name (maximum of
6 alphabetic or numeric characters).
(6)
Apply
and
END
44
Note: If a selected key has been previously programmed by the user, it can be reprogrammed at any time. Keys pre-programmed with system features may not be reprogrammed by the user.
Entry corrections:
•
•
•
•
•
BckSpc
Servic
Back space - to delete the last letter entered
To program a feature
Number
Name
Erase
To change a number
To change the name associated with the number
To delete both name and number
Return
To return to the "choice of key" menu
Switching on the station speaker during a call
To allow others in the room to hear the party you are speaking with, activate the
Listen
station speaker:
To switch the station speaker off:
Listen
again.
Adjusting station speaker volume during a conversation
Listen
to activate the station speaker, then
or
to adjust the volume (7 volume levels available).
The station speaker volume level is indicated on the screen for a few seconds.
45
E A S E O F
U S E
•
Adjusting handset volume during a call
or
to adjust the volume (7 volume levels available).
The handset volume level is indicated on the screen for a few seconds.
Switching off the microphone (mute)
You can turn off the microphone (mic) in the course of a conversation, whether via
Mute . The Mute LED will flash and you will be
the handset or hands-free.
able to hear the caller, but he or she will not be able to hear you. To continue the
Mute
conversation as usual,
again.
Calling the last number dialed (redial)
REDIAL
- the number will be displayed and dialed automatically.
Adjusting the ringer - Melody and Volume
You can choose the melody your terminal plays (from among 16 options), and the
volume level.
To adjust the ringer (terminal in idle mode):
(1) To play your current melody:
Menu
then
Prog
(2) Listen to the various melodies:
Listen
or
,
Melody
and
Prev
46
or
Next
Down
(3) Adjust the volume level:
or
Up
or
or
- the station speaker volume is displayed briefly .
END
(4) Confirm your choice by:
(to quit) or
(to return to the programming menu).
Menu
Adjusting the display viewing angle
To adjust the display visibility:
Menu
then
(2) Use the Navigator up
E A S E O F
U S E
(1)
(to increase) or down
(to decrease) the level. The visibility will change with each keystroke.
or (use an alternate approach):
(1)
Menu
then
Prog
Displ
and
_
(2) Press the display key for the level you prefer:
to
The visibility will change immediately with each keystroke.
(3)
END
Back
to confirm your choice (and quit), or
to return to the programming menu.
47
+
.
Changing the associate number
The associate number (a number linked to your extension) can be another extension,
a voice message service number, or a pager number.
To change the associate number:
(1)
Menu
Prog
then
Assoc.
and
If it has been programmed, the associate number is displayed
(2)
Modify
(3) To confirm
, enter your personal code, then enter the new associate number.
END
To cancel this number, proceed in the same way, but dial your own extension
number instead of the associate number.
Identifying the terminal:
Menu
then
WhoAmI
The system will display the name and number for this terminal.
Setting an appointment reminder
To program either a wakeup call or an appointment reminder:
(1) Dial the code for the "Wake-up/appointment reminder" feature, or
Remind
or
Access the service feature group "Appointment reminder" to apply Remind.
48
(2) Enter the time of the reminder: two digits for the hour, two digits for the minutes
(i.e., in 24-hour format - “1:30 PM” is entered as “1330.”
BckSpc
enables you to correct mistakes).
(3) If this is your own terminal, go on to the next step (otherwise enter the number
of the terminal that is to be rung).
4.
END
to confirm.
Note: If you do not respond to the first reminder attempt, the system will call you again. After
the second attempt, the reminder call will be abandoned.
If your terminal is being forwarded to another terminal, the reminder call will not follow the
forwarding.
To cancel the appointment call, follow the same procedure you used to set it up, using
or RmdOff or the code for the "Cancel wake-up/appointment reminder" feature.
Remind
Do not disturb
You can make your terminal temporarily inaccessible to all incoming calls (except
from the attendant).
49
E A S E O F
U S E
At the selected time, the telephone will ring and the display will indicate a
reminder call. To acknowledge the reminder: lift the handset and replace it.
To put your terminal in Do Not Disturb mode:
(1) Dial the code for the "Do not disturb" feature, or
DND
or
Access the service group "Set DND and Locking" to apply DND.
(2) When prompted, enter your personal code.
(3)
END
. Your display will indicate "Do not disturb."
To cancel this, follow the above procedure again.
Forwarding calls when you are busy
To set immediate forwarding of your calls:
(1) Dial the code for the "Forward on busy - Immediate" feature, or
Busy
or
Access the service feature group "Forwarding services" to apply Busy.
(2) Following the prompts, enter the number to which calls are to be forwarded.
The display will indicate that your entry has been accepted.
(3)
END
to confirm - the display will indicate that forwarding is in effect.
Note: To cancel forwarding, see the section “Cancel Forwarding” in the Absence section.
50
Saving a number, to call it later
If your party (internal or external) does not answer, you can store the number.
To store a number:
(1) Before you hang up,
(2) To ring it again later:
STORE #
- the number you dialed will be stored.
STORE #
This number will remain in memory until it is used or replaced by another number.
When you call an outside line that includes caller identification in its service, your
number is automatically transmitted. If available in your system, you may choose
to hide your identity prior to making a call. (To use this feature, you need to have
previously programmed a key with the code "Secret identity")::
To hide your identity on your next call:
(1)
CALL LOG
then
Secrt
and
END
(2) Dial the external number you want.
To cancel this confidential status,
CALL LOG
and
.
Secrt
.
Note: Availability of this feature depends upon your system configuration.
51
E A S E O F
U S E
Hiding your identity
Hiding your caller's identity
Whether your phone is in use or idle, you can hide the identity of your calling party.
(To do this, you need to have previously programmed a key with the code "Identity
DispId
display"). To activate (or to cancel) this feature:
Allocating calls to customer account codes
To charge calls to customer account numbers:
(1) Dial the code for the "Business account code" feature, or
Prject
or
Access the service feature group "Additional services" to apply Prject.
(2) Enter the appropriate account number.
(3) Dial 9 and the external telephone number you are dialing
Determining the cost of your last external call
To see the cost for your last call:
Enter the code for the "Chargeback/account reading" feature, or
Charge
or
Access the service feature group "Check / Callback" to apply Charge.
The display will indicate time and cost information regarding your last outside call
and the current cost total (depending upon your system configuration).
52
Calling an external "private" number
Even though personal (i.e., “private”) use of the phone may be restricted, you can
make "private" calls by identifying them prior to making an external call.
To call an external “private” number:
(1) Lift the handset and enter the code for the "Private call" feature
(2) Enter your assigned PIN code, then enter your password
(3) Dial the external number
Note: Private calls cannot be transferred to a different terminal.
53
E A S E O F
U S E
Private calls will be charged separately.
54
A B S E N C E
IN YOUR
ABSENCE
55
Forwarding calls to another number
You may forward your calls to another internal terminal or (if allowed in your
system) to an external number.
To forward your calls:
(1) Enter the "Forwarding - immediate" feature code (see Table of Codes), or
FORWARD
or
Access the service feature group "Forwarding services" to apply Immed.
(2) Dial the number of the telephone receiving the forwarded calls.
The display shows that your entry was accepted ( Programming Accepted.)
END
(3)
to return your set to normal calling mode.
The display will shows that calls are being forwarded and to what number.
Note: While in call forwarding condition, you can continue to make outgoing calls, but only
the forwarded number can contact your station.
Overflowing calls to an associate number
If you have already defined an associate number (see "Changing the associate
number"), you can forward your calls to that (extension, voice mail, or other)
number. You can forward calls to your associate to reflect any one of the available
conditions.
To forward calls to an associate number:
(1) Enter the appropriate feature code (see Table of Codes) or
56
Access the service feature group "Associate services."
(2) Apply one of the following:
•
•
•
•
(3)
OvFlw
: to forward if you do not answer within a specified time.
Busy
: to forward immediately when your station is busy.
ByNoA
: to combine of both the above, or
OvflOf
: to cancel this feature.
END
Note : These features can be invoked by dialing the appropriate code (overflow) or by
pressing the corresponding programmed key.
Forward on no answer
NoAns. or
Access the service feature group "Forwarding services" to apply NoAns>.
(2) Then, following the prompts, dial the number to which calls are to be
forwarded. The display will confirm that forwarding has been programmed.
(3)
END
;
57
A B S E N C E
To forward your calls to another number (when you are away from your desk):
(1) Dial the code for the "Forward on no answer" feature, or
The display will show that forwarding on no answer is in effect.
Calls are forwarded after a period of time, when your terminal does not answer
Note: If your system permits, you may be able to forward calls to an external number.
Forward on busy or no answer
To forward calls to another number (when your line is busy or you are away):
(1) Dial the code for the "Forward on busy or no answer" feature, or
ByNoAn
or
Access the service feature group "Forwarding services" to apply ByNoA>.
(2) Then, following the prompts, dial the number to which calls are to be
forwarded. The display will confirm that forwarding has been programmed.
(3)
END
Note: If your system permits, you may be able to forward calls to an external number.
Forwarding your calls from a different terminal (Remote Forward)
The forwarding feature allows you to have your calls answered at other terminals
or by voice mail system, and depends upon your system configuration. Your station
display and the voice guide indicate if calls are being forwarded.
58
Forwarding your calls from the terminal you are on (Follow me)
If you are temporarily in another room, you may want your calls to be forwarded
to you at that location.
To set “follow-me” type forwarding (from the terminal receiving the transfer):
(1) Enter the "Forwarding (Remote)" feature code (see Table of Codes), or
RemFwd
or
Access the service feature group "Forwarding services" to apply RemFwd.
(2) Per the prompts, enter your own terminal number.
(3)
END
If you wish to forward calls from one terminal to another terminal, you can activate
the feature from the destination terminal (or from a third terminal):
To set “remote” forwarding (from any terminal to any terminal if feature has been enabled in your configuration):
(1) Enter the "Forwarding (Remote)" feature code (see Table of Codes), or
RemFwd
or
Access the service feature group "Forwarding services" to apply RemFwd.
(2) Per the prompts, dial the number receiving the transferred calls (destination).
(3) Enter the terminal number to be forwarded (your own or a third party’s).
(4)
END
59
A B S E N C E
Forwarding calls from any terminal within the company
Forwarding calls to a recorded message (voice mail):
To forward calls to voice mail:
(1) Dial the code for the type of forwarding that you need, or
Press the key
programmed for the type of forwarding desired, or
Access the service feature group "Forwarding services" to apply forwarding.
(2) Dial the number of your company's voice mail system.
(3)
END
.
Canceling forwarding
You can cancel forwarding from your own terminal, from the terminal receiving your
forwarded calls, or from any other terminal in the system.
Note: Whenever you program new forwarding, previous forwards are canceled.
To cancel forwarding (from your own terminal):
(1) Dial the code for the "Forwarding - Cancel" feature, or
FwdOff
, or
Access the service feature group "Forwarding services" to apply FwdOff.
Your display will confirm that forwarding is canceled.
(2)
END
.
60
To cancel forwarding (from the internal terminal that is receiving your forwarding):
(1) Dial the code for the "Forwarding (Remote) - cancel" feature, or
Access the service feature group "Forwarding services" to apply RmFdOf.
(2) Then dial your extension number (i.e., the terminal that is to be forwarded).
(3)
END
.
To cancel forwarding (from any other terminal within the company):
(1) Dial the code for the "Forwarding (Remote) - cancel" feature, or
RFwdOf
or
Access to the list of features "Forwarding services" to apply RFwdOf.
(2) Then dial the number of the terminal that was being forwarded
(3)
END
.
Multi-line terminals can be configured with a primary number and one or more
secondary numbers. Calls to your primary number and to your secondary numbers
can be forwarded to different terminals:
To arrange Selective forwarding:
(1) Access the service feature group "Forwarding services" to apply forwarding.
The system then offers forwarding of your main number, your secondary
61
A B S E N C E
Selective forwarding
numbers, or all of your numbers.
(2) Select the appropriate option, and
Apply
(3) Dial the number that is to receive the forwarding.
(4)
END
Note: Availability of this feature depends upon your system configuration.
Checking messages
When
and the green LED are flashing, you have messages waiting.
to display the total number of message waiting for you.
Accessing and answering callback requests
When
waiting:
green LED are flashing, you have messages (or callbacks)
To answer callback requests:
CallBk
(1)
(2) Call them:
CallBk
or
Store the message for later:
Go to the next message:
to display the first person to be called back.
Save
Next
62
or
If the previous message has not being stored in memory, it will be deleted.
Note: The callback request is deleted even if the caller does not answer.
You can protect access to your messages by using your personal code.
Leaving a text message (“I am away”) for internal callers
You can leave text message (called an "Apology") on your terminal. This message
will be displayed on the terminal of anyone who calls you.
To leave an “apology” at your terminal:
(1)
(3)
Text
Text
and select a a message.
END
The display screen will offer you a choice of messages. Select your message as
described in the chapter Your Calls, in the section entitled: "Sending a text message
to an internal party."
Pre-written apology messages:
1. In a meeting - do not disturb
2. Outside meeting
3. Call the attendant
4. Back in a minute
5. Call back tomorrow
63
A B S E N C E
(2)
then
6.
7.
8.
9.
10.
11.
Call *** (*)
In a meeting, room ** (*)
Call *** (*)
Away, back on **/** (*)
On vacation till **/** (*)
Out - back at **/** (*)
Note: (*) Complete these messages using the keypad.
Your display will show that an apology message is in operation. Your callers will
be informed on their screens, and can read the message by using "Scroll."
To cancel the apology message at your terminal:
(1)
(2)
(3)
Txt>Of
then
Text
and
Deact
END
Reading internal text messages left in your absence
When
waiting:
and the green LED are flashing, you have messages (or callbacks)
To answer text messages:
(1)
- the display will tell you how many messages are waiting.
64
(2)
Text
and
Read
The first line will give you the person's name, and the date and time of the message.
The second line gives you a set of options, which allow you to:
• Save
: store received messages in memory
• Scroll
: display the messages
• Answer
: to answer with a text message
• Next
: go on to the next message
• Callback
: telephone the author of the message
• Back
: to return to the prior message
Note: Any message you do not store will be deleted once you go on to the next message,
or once you leave Message mode.
Reviewing the list of internal calls
To review the list of internal calls:
(1)
(2)
- to display the number of calls made to your station.
NotAns
- to review the list:
The first line will give you the person's number, and the date and time of the call.
65
A B S E N C E
When you are away, (up to 10) internal calls to your station will be listed. The
icon indicates if there are messages for you (or calls on the list).
The second line gives you a set of options, including:
• Save: To store received messages (or callbacks) in memory.
(See the section “Reading messages left in your absence”)
Checking voice mail messages
When
and the green LED are flashing, you have messages waiting.
then
Voice
and follow the voice guide instructions.
Locking your terminal
This feature prevents any calls from being made at your terminal, and any changes
from being made to its programming.
To lock your terminal:
Lock
Enter the "Lock" feature code, or
or
Access the service feature group "Lock/DND" to apply Lock.
To unlock your terminal:
Enter the "Lock" feature code, then enter your password
Forwarding your calls to your personal pager
This enables people to page you if you are within range of your internal paging
system.
66
To forward calls to your pager:
(1) Enter the desired forwarding feature code (see Table of Codes), or
FORWARD
or
Access the service feature group "Forwarding services" to apply Frward.
(2) Enter the number of your portable beeper.
The display screen will acknowledge your station status.
Option note: integration of a paging solution and a paging access arrangement depend
upon the configuration of your system.
Replying when your personal pager sounds
If you receive a page and are still in the building, you can reply to it from any
company phone:
To reply to a page on your “beeper”:
Paging
or:
Access the feature group "Paging services" to apply Paging.
(2) Dial your own terminal number - you will be connected to the person who
paged you.
Option note: integration of a paging solution and a paging access arrangement depend
upon the configuration of your system.
67
A B S E N C E
(1) Dial the code for the "Paging reply" feature, or
Calling back the last internal caller whose call went unanswered
You can call the last internal caller back, even without knowing who it was.
Lift the handset.
(1) Dial the code for the "Last caller call back" feature, or
LastCa
or
Access the service feature group "Consultation & Callbacks" to apply LastCa.
The last caller's identity will be displayed.
(2)
Callbk
Reviewing the log of external calls
When you are away, identified calls (up to 16) received from outside lines will be
logged. The CALL LOG icon indicates if there are calls on the log.
To review the log of external calls:
(1)
(2)
CALL LOG
NotAns
- the display will show how many calls have were made to you.
- to review the list:
The first line gives you the person's name, and the date and time of the message.
The second line gives you a set of options, including:
• Save: To store received messages (or callbacks) in memory.
(See the section “Reading messages left in your absence”)
68
GLOSSARY
BARGE-IN
Feature that enables a station to intrude into a conversation already in progress between two other
parties (at least one of whom is internal).
BROKER CALL
Feature which allows you to conduct two conversations at the same time, switching from one to
the other, as needed.
CALL PICKUP
Feature which allows you to pick up a call coming into a different terminal within the same call
pickup group.
CONFERENCE CALL
Feature which allows you to speak with two parties at the same time.
DTMF DIALING
Acronym for: Dual Tone Multi-Frequency dialing. DTMF (Tone) dialing transmits audible codes
over the telephone line, allowing the caller to operate equipment or systems (e.g., bank,
automated attendant, remote-operated answering machine, etc.) by telephone.
HOLD
Feature which allows you to have a party wait while you perform a second operation, and then
return to the call at the same station.
HUNT GROUP
Set of terminals configured so that incoming calls can be answered by the next available terminal
in the hunt group sequence. A hunt group may be assigned a specific number in the directory or
phone book.
69
INTERPHONE MODE
Activated by pressing the MUTE key, Interphone mode allows you to answer incoming internal
calls immediately, without having to lift the handset.
ISDN
Integrated Services Digital Network.
LED
Acronym for: Light Emitting Diode
LINE KEY
Key (button) which provides access to a station line.
MANAGER/ASSISTANT
The range of enhanced services such as screening, forwarding, etc., available between a station
used by a manager and assistant, etc.
MULTI-LINE TERMINAL
A telephone terminal which has two or more line keys.
NIGHT SERVICE
Feature used after hours or when the attendant is away, which allows incoming calls to be
answered from any terminal.
PARKING
Feature which allows a call to be placed on a specific type of hold, and to be retrieved on another
terminal in the system.
70
PERSONAL CODE (PASSWORD)
Code which acts as a password to control access to programming features and for locking your
terminal. (default: 0000).
PERSONAL DIRECTORY
Directory containing the “Speed Dialing” telephone numbers for a specific terminal.
PICKUP GROUP
Set of terminals configured to allow group members to pick up call coming into a different terminal
within the group, at their own station.
SCHEDULED CONFERENCE
Telephone conference consisting of as many as 29 (internal and external) parties, held at a prearranged time, with controlled access via a multi-digit code.
SCREENING
Feature available to a manager/assistant pair, allowing calls to the manager to be intercepted
by one or more assistants.
SINGLE-LINE TERMINAL
Telephone which has one only line available (no line keys).
SYSTEM DIRECTORY
Directory containing the “Speed Dialing” numbers available to terminals attached to your system.
TRANSFER
Feature which allows you to pass a call to another user within your system.
71
72
INDEX
A
account codes, 52
answering a call, 20
answering a night service bell, 27
answering other calls during a conversation, 20
apology message, 63
appointment reminder, 48
associate number, changing, 48
associate, calling, 20
attendant, calling, 19
B
Barge-in, 29
Barge-in, privacy/protection against, 29
Broker calls, 22
C
call announce, 30
call pickup (in your call pickup group), 23
call pickup (not in your call pickup group),23
callback, requesting, 26
Callback requests, answering, 62
calling - using a programmed key, 24
calling - using your personal directory, 23
calling a 2nd person, 19
calling a number - using the system directory, 28
calling a party through the station speaker, 30
calling back the last internal caller you missed, 68
Camp-on, 26
cancel forwarding from another terminal, 61
cancel forwarding from the receiving terminal, 61
cancel forwarding from your terminal, 60
Canceling Forwarding, 60
Common hold, 32
Compliance, 76
Conference call - two other people, 24
conference, entering a scheduled, 27
conferencing, transferring a caller into a, 28
Consultation Call (Calling a 2nd person), 19
contacting a party whose calls are being forwarded
or blocked, 29
corrections, 45
cost, last external call, 52
customer account codes, 57
D
Dial By Name, 35
display adjustment, 47
display language, choosing, 43
Do Not Disturb, 49
73
E
entry corrections, 45
equipment, care of, 76
external call, 18
external calls (log), 68
F
feature groups, 39
Forward on busy or no answer, 58
Forward on no answer, 57
Forwarding calls from any terminal, 59
Forwarding calls to voice mail, 60
Forwarding calls to another number
(Forwarding - immediate), 56
Forwarding calls when you are busy, 50
Forwarding your calls from a different terminal
(Remote Forward), 58
Forwarding your calls from the terminal you are on
(Follow Me), 59
Forwarding your calls to your personal pager, 66
Forwarding, selective, 61
G
GLOSSARY, 69
Group 1: Forwarding Services, 40
Group 2: Locking/DND, 40
Group 3: Call Pickup Services, 41
Group 4: Associate Services, 41
Group 5: Check / Callbacks, 41
Group 6: Appointment Reminder, 41
Group 7: Voice Mail Services, 42
Group 8: Additional Services, 42
Group 9: Paging Services, 42
Group 10: Transparency, 42
H
handset volume, 46
Hands-free, 44
Hold, 22
hunt group, returning to, 32
hunt group, temporarily leaving, 31
Hunt Groups, 31
I
Identifying the terminal you are on, 48
identity, hiding, 51
identity, hiding a caller's, 52
intercom list, modifying, 31
Interphone mode and Hands-free, 30
internal call, 18
internal calls (list), 65
L
language display, 43
locking, 66
“losing” a call on hold, 22
M
messages left in your absence, 64
messages, checking, 62
messages, retrieving recorded, 66
microphone (mute), 46
74
O
Overflowing calls to an associate number, 56
P
pager, calling, 34
pager, replying to, 67
Parking a call, 25
personal code, 43
personal directory 44
Personalizing your Advanced terminal, 38
Picking up calls ringing at another terminal, 23
Private external calling, 53
Programming station or display keys, 39
R
Redial, 46
reminder call, 48
ringer (melody and volume), 46
S
saving a number, to call it later, 51
station speaker, 45
station speaker volume, 45
switching between calls (Broker Calls), 22
T
text message (at beginning of call), 34
text message to an external party, 34
text message to an internal party, 33
transferring a call, 21
V
voice message, direct, 35
voice mail messages, 66
75
Care of equipment:
Caution: never allow the telephone equipment to become wet. You may however, use
a damp cloth to gently clean the telephone.
Never use solvents on the telephone equipment, as they may damage the surfaces of
your telephone set. Never spray cleaning products of any kind on or into your set.
Compliance/Regulations:
This device complies with Part 68, FCC Rules.
FCC Registration Number: 2DH FRC - 34608 - PF - E
Ringer Equivalence: 0.6B
HAC
This device complies with Part 15, of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesirable operation.
This terminal has been designed for connection to an Alcatel OmniPCX 4400.
Copyright© 2000 by Alcatel Internetworking, Inc. All rights reserved. This document may not be reproduced
in whole or in part without the express written permission of Alcatel Internetworking, Inc.
AlcatelÒ and the Alcatel logo are registered trademarks of Alcatel.
trademarks of ALCATEL.
OmniPCXÔ and REFLEXESÔ are
The functionality described in this manual is subject to change without notice.
3AK 19520 USAB Ed.01
76