Fuse Product Catalog and Design Guide

Fuse Product Catalog and Design Guide
PRODUCT
CATALOG
& DESIGN
GUIDE
Circuit Protection Products
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Littelfuse Circuit Prot
Solutions Port
Consumer Electronics Telecom White Goods Medical Equipment TVSS and Power
DESIGN SUPPORT
Live Application Design and Technical Support—Tap into our expertise. Littelfuse engineers are available around the world to help you address design challenges and develop
unique, customized solutions for your products.
Product Sampling Programs—Most of our products are available as samples for testing and
verification within your circuit design. Visit Littelfuse.com or contact a Littelfuse product
representative for additional information.
Product Evaluation Labs and Services—Littelfuse global labs are the hub of our new
product development initiatives, and also provide design and compliance support testing
as an added-value to our customers.
1
OVERVOLTAGE SUPPRESSION TECHNOLOGIES (1-6)
1. TVS Diodes — Suppress
overvoltage transients such
as Electrical Fast Transients
(EFT), inductive load switching
and lightning in a wide
variety of applications in the
computer, industrial, telecom
and automotive markets.
4. Gas Plasma Arrestors
(GDTs) —Available in small
footprint leaded and surface
mount configurations,
Littelfuse GDTs respond
fast to transient overvoltage
events, reducing the risk of
equipment damage.
2. Varistors—Multiple forms,
from Metal Oxide Varistors
(MOVs) that suppress transient
voltages to Multi-Layer Varistors
(MLVs) designed for applications
requiring protection from
various transients in computers
and handheld devices as well
as industrial and automotive
applications.
5. SPA™ Silicon Protection
Arrays — Designed specifically
to protect analog and digital
signal lines from electrostatic
discharge (ESD) and other
overvoltage transients.
3. SIDACtor® Devices —
Complete line of protection
thyristor products specifically
designed to suppress
overvoltage transients in a
broad range of telecom and
datacom applications.
2
6. PulseGuard® ESD
Suppressors —Available in
various surface mount form
factors to protect high-speed
digital lines without causing
signal distortion.
Visit
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
tection
folio
Supplies Lighting General Electronics
3
5
SWITCHING
TECHNOLOGIES
ACCESSORIES
Switching Thyristors—
Solid-state switches used to
control the flow of electrical
current in applications, capable
of withstanding rated blocking/
off-state voltage until triggered
to on-state.
In addition to our broad portfolio
of circuit protection technologies,
we offer an array of fuse holders
including circuit board, panel
or in-line wire mounted devices
to support a wide range of
application requirements.
7
OVERCURRENT
PROTECTION
TECHNOLOGIES (7-8)
7. Positive Temperature
Coefficient Devices (PTCs)—
Provide resettable overcurrent
protection for a wide range of
applications.
4
6
8
8. Fuses — Full range including
surface mount, axial, glass or
ceramic, thin-film or Nano2®
style, fast-acting or SloBlo®,
MINI ® and ATO ® fuses.
www.littelfuse.com for more information.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Fuses
As the #1 circuit protection company in the world Littelfuse offers the largest
selection of fuses available, including surface mount, axial, glass or ceramic,
thin-film or Nano2® style, fast-acting or SloBlo®, MINI® and ATO® fuses.
In fact, many of our fuse products are the industry standard. Companies
across the globe rely on Littelfuse circuit protection solutions to enhance
the safety and reliability of their products, safeguard sensitive circuits and
protect critical business assets.
From popular consumer electronic devices like MP3 players, mobile phones
and digital cameras, to home appliances, telecom infrastructure equipment
and critical life saving medical equipment, Littelfuse has the right fuse
product for virtually any application.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Detailed Data Sheet Indexes
2-5
Fuse Characteristics, Terms and Consideration Factors
6-8
Fuse Selection Guide
9-11
Standards
12-14
Littelfuse Fuse Part Numbering System
15
Data Sheets: Surface Mount Fuses
Low Profile Ceramic and SlimLineTM Surface Mount Fuses
17-48
Nano® Type Surface Mount Fuses and Fuseholder Assemblies
49-106
459/460 PICO® SMF, 202/203 FLAT-PAK® and 446/467 EBF
Surface Mount / Thru-Hole Fuses
107-126
Surface Mount
Introduction
Introduction
TABLE OF CONTENTS
127-137
Micro and TR-3 Fuses
TR-5 Fuses
137-162
TE-5 Fuses
163-198
Radial Lead
Data Sheets: Radial Lead Fuses
PICO® / PICO II® Axial Lead Fuses
199-230
3.6 x 10 mm Axial Lead Fuses
231-246
4.5 x 14.5 mm (2AG) Axial Lead & Cartridge Fuses
247-264
5 x 20 mm Axial Lead & Cartridge Fuses
265-312
6.3 x 32 mm (3AG/3AB) Axial Lead & Cartridge Fuses
313-340
Axial Lead /
Cartridge
Data Sheets: Axial Lead and Cartridge Fuses
242 Series Barrier Network Fuse, 259 Series Safe-T-Plus Fuse
and 481/482 Alarm Indicating Fuse and Fuseholder
341-348
Special
Application
Data Sheets: Special Application Fuses
For information about Littelfuse fuseholders,
automotive fuses and larger industrial fuses,
please visit www.littelfuse.com/catalogs
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
1
Revised: Jan 12, 2009
Introduction to Circuit Protection
Transientology
Data Sheet Index: Organized By Fuse Series
Series #
Page #
Series #
Page #
Series #
Page #
Series #
Page #
154
93
259
343
369
163
453
57
154T
93
262
127
370
139
454
61
65
157
95
263
207
372
143
456
157T
99
265
223
373
147
458
69
159
103
266
223
374
151
459
107
202
115
267
223
382
155
460
111
203
119
268
127
383
159
461
85
208
247
269
127
385
167
461E
89
209
251
272
131
388
333
464
77
213
273
273
131
391
171
465
81
215
285
274
131
392
175
466
29
216
281
275
203
395
179
467
41
217
265
276
203
396
183
468
37
218
269
278
131
397
187
471
211
219XA
277
279
131
398
191
472
215
224
255
303
135
399
195
473
219
225
255
312
313
429
33
477
309
229
259
313
317
435
45
481
345
230
259
314
321
437
17
482
347
232
289
315
317
438
21
501
25
233
297
316
227
443
73
505
337
234
301
318
313
446
123
874
231
235
293
322
325
447
123
875
235
239
305
324
321
448
49
876
239
242
341
325
329
449
53
877
243
251
199
326
329
451
57
253
199
332
325
452
61
To view current information about Littelfuse product series, visit
http://www.Littelfuse.com/Series/(Series #).html
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2
Revised: Jan 12, 2009
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Data Sheet Index: Organized By Fuse Type and Size
Surface Mount Fuses
Low Profile Ceramic High Temperature Surface Mount Fuses
437 series, 1206 Size, High Temperature, Fast-Acting, Lead-Free
17
438 series, 0603 Size, High Temperature, Fast-Acting, Lead-Free
21
501 series, 1206 Size, High Temperature, Fast-Acting, Lead-Free, High Current
25
Low Profile SlimLineTM Thin-Film Surface Mount Fuses
466 series, SlimLineTM 1206 Size, Very Fast-Acting, Lead-Free
29
429 series, SlimLineTM 1206 Size, High Current Very Fast-Acting, Lead-Free
33
468 series, SlimLineTM 1206 Size, Slo-Blo®, Lead-Free
37
467 series, SlimLineTM 0603 Size, Very Fast-Acting, Lead-Free
41
435 series, SlimLineTM 0402 Size, Very Fast-Acting, Lead-Free
45
NANO2® Surface Mount Fuses
448 series, NANO2® Very Fast-Acting, Lead-Free
49
449 series, NANO
53
Slo-Blo , Lead-Free
2®
®
451/453 series, NANO Very Fast-Acting
57
452/454 series, NANO
61
2®
2®
Slo-Blo
®
456 series, NANO
65
458 series, NANO
69
443 series, NANO2® 250V Time-Lag
73
464 series, NANO2® 250V UMF Fast-Acting
77
465 series, NANO2® 250V UMF Time-Lag
81
461 series, TeleLink®
85
461E series, Enhanced TeleLink®
89
154/154T series, NANO2® OMNI-BLOK® Fuse and Holder
93
157 series, NANO2® OMNI-BLOK® Fuse and Holder
95
157T series, NANO
99
2®
2®
2®
159 series, NANO
2®
OMNI-BLOK Fuse and Holder
®
103
OMNI-BLOK Fuse and Holder
®
Other (Leaded surface mount and through hole fuses)
459 series, PICO® leaded surface mount fuse
107
460 series, PICO® leaded surface mount fuse
111
202 series, FLAT-PAK® leaded surface mount fuse, Fast-Acting
115
203 series, FLAT-PAK® leaded surface mount fuse, Slo-Blo®
119
446 series leaded surface mount fuse / 447 series leaded through hole fuse, Fast-Acting
123
> Section continued on next page.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
3
Revised: Jan 12, 2009
Introduction to Circuit Protection
Transientology
Data Sheet Index: Organized By Fuse Type and Size (continued from previous page)
Radial Lead Fuses
Micro / TR-3 Fuses
262/268/269 Series, MICRO™ Very Fast-Acting Fuse (High-Reliability)
127
272/273/274/278/279 Series, MICRO™ Very Fast-Acting Fuse
131
303 Series, TR-3 , [email protected], Fast-Acting
135
370 Series, TR-5®, [email protected], Fast-Acting
139
372 Series, TR-5 , [email protected], Time-Lag
143
373 Series, TR-5 , [email protected], Fast-Acting
147
374 Series, TR-5®, [email protected], Time-Lag
151
382 Series, TR-5 , [email protected], Time-Lag Extended Breaking Capacity
155
383 Series, TR-5 , [email protected], Time-Lag
159
369 Series, TE-5®, [email protected], Time-Lag
163
385 Series, TE-5®, [email protected], Time-Lag
167
391 Series, TE-5 , [email protected], Fast-Acting
171
392 Series, TE-5 , [email protected], Time-Lag
175
395 Series, TE-5®, [email protected], Fast-Acting
179
396 Series, TE-5 , [email protected] 125V, Time-Lag
183
397 Series, TE-5®, [email protected], Time-Lag
187
398 Series,TE-5 , [email protected], Medium Time-Lag
191
399 Series, TE-5 , [email protected], Time-Lag
195
®
TR-5 Fuses
®
®
®
®
TE-5 Fuses
®
®
®
®
®
Axial Lead and Cartridge Fuses
PICO® & PICO II® Axial Lead Fuses
251/253 Series, PICO® II, Very Fast-Acting Fuse
199
275/276 Series, PICO®, Very Fast-Acting Fuse
203
®
263 Series, PICO II 250 Volt, Very Fast-Acting Fuse
207
471 Series, PICO II, Time-Lag Fuse
211
472 Series, PICO II, Time-Lag Fuse
215
®
®
473 Series, PICO II, Slo-Blo Fuse
219
265/266/267 Series, PICO®, Very Fast-Acting Fuse (High-Reliability)
223
316 Series, PICO® II, Very Fast-Acting Fuse
227
®
®
3.6 x 10 mm Cartridge and Axial Lead Fuses
874 Series,Fast–Acting
231
875 Series,Slo-Blo®
235
876 Series,Fast–Acting
239
877 Series,Slo-Blo
243
®
> Section continued on next page.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
4
Revised: Jan 12, 2009
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Axial Lead and Cartridge Fuses (Continued from previous page)
4.5 x 14.5 mm (2AG) Catridge and Axial Lead Fuses
208 Series, UL Standard, 350V, Fast-Acting
247
209 Series, UL Standard, 350V, Time-Lag
251
224/225 Series, UL Standard, Fast-Acting (Wider Amperage Range)
255
229/230 Series, UL Standard, Time-Lag (Wider Amperage Range)/Indicating
259
5 x 20 mm Cartridge and Axial Lead Fuses
217 Series, IEC Standard, Low Breaking Capacity ,(<100A, Glass), 250V Fast-Acting
265
218 Series, IEC Standard, Low Breaking Capacity,(<100A, Glass), 250V Time-Lag
269
213 Series, IEC Standard, Low Breaking Capacity, (<100A, Glass), 250V Time-Lag, Surge Withstand
273
219XA Series, IEC Standard, Low Breaking Capacity, (<100A, Glass), 250V Time-Lag, High I t
277
216 Series, IEC Standard, 250V, High Braking Capacity, (1500A, Ceramic) Fast-Acting
281
215 Series, IEC Standard, 250V, High Braking Capacity (1500A, Ceramic) Time-Lag, Surge Withstand
285
232 Series, Japanese Standard, 250V, Medium-Acting
289
235 Series, UL Standard, 125V (10KA), Fast-Acting
293
233 Series, UL Standard, 125V (10KA), Medium-Acting
297
234 Series, UL Standard, 250V, Medium-Acting
301
239 Series, UL Standard, 125V (10KA) or 250V (<100A), Time-Lag
305
477 Series, IEC Standard, 400Vdc/500Vac, Time-Lag
309
2
6.3 x 32 mm (3AG/3AB) Cartridge and Axial Lead Fuses
312/318 Series, (UL Standard, Glass) Fast-Acting
313
313/315 Series, (UL Standard, Glass) Time-Lag
317
314/324 Series, (UL Standard, Ceramic, Higher Braking Capacity) Fast-Acting
321
322 Series, (UL Standard, Ceramic, Higher Breaking Capacity) Very Fast-Acting
325
325/326 Series, (UL Standard, Ceramic, Higher Breaking Capacity) Time-Lag
329
388 Series, (Glass) METI B Fuse
333
505 Series, (UL Standard, Ceramic) Fast-Acting
337
Special Application Fuses
242 Series Barrier Network Fuse
341
259 Series Safe-T-Plus Fuse
343
481 Series Alarm Indicating Fuse
345
482 Series Alarm Indicating Fuseholder
347
To view current information about Littelfuse product series, visit
http://www.Littelfuse.com/Series/(Series #).html
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
5
Revised: Jan 12, 2009
Introduction to Circuit Protection
Transientology
Fuse Characteristics, Terms and Consideration Factors
protection against fire, etc. Some common variations of
these standards include: fully enclosed fuseholders, high
contact resistances, air movement, transient spikes, and
changes in connecting cablesize (diameter and length).
Fuses are essentially temperature-sensitive devices. Even
small variations from the controlled test conditions can
greatly affect the predicted life of a fuse when it is loaded
to its nominal value, usually expressed as 100% of rating.
The purpose of this introductory section is to promote
a better understanding of both fuses and common
application details within circuit design.
The fuses to be considered are current sensitive devices
designed to serve as the intentional weak link in the
electrical circuit. Their function is to provide protection of
discrete components, or of complete circuits, by reliably
melting under current overload conditions. This section
will cover some important facts about fuses, selection
considerations and standards.
The circuit design engineer should clearly understand
that the purpose of these controlled test conditions is to
enable fuse manufacturers to maintain unified performance
standards for their products, and he must account for
the variable conditions of his application. To compensate
for these variables, the circuit design engineer who is
designing for trouble-free, long-life fuse protection in his
equipment generally loads his fuse not more than 75%
of the nominal rating listed by the manufacturer,keeping
in mind that overload and short circuit protection must be
adequately provided for.
The application guidelines and product data in this guide
are intended to provide technical information that will
help with application design. The fuse parameters and
application concepts presented should be well understood
in order to properly select a fuse for a given application.
Since these are only a few of the contributing parameters,
application testing is strongly recommended and should be
used to verify performance in the circuit / application.
The fuses under discussion are temperature-sensitive
devices whose ratings have been established in a 25ºC
ambient. The fuse temperature generated by the current
passing through the fuse increases or decreases with
ambient temperature change.
Littelfuse reserves the right to make changes in product
design, processes, manufacturing location and information
without notice. For current Littelfuse product infomation,
please visit our web site at www.littelfuse.com.
------------------------------------------------------
The ambient temperature chart in the FUSE SELECTION
GUIDE section illustrates the effect that ambient
temperature has on the nominal current rating of a fuse.
Most traditional Slo-Blo® Fuse designs use lower melting
temperature materials and are, therefore, more sensitive to
ambient temperature changes.
AMBIENT TEMPERATURE: Refers to the temperature
of the air immediately surrounding the fuse and is not to
be confused with “room temperature.” The fuse ambient
temperature is appreciably higher in many cases, because
it is enclosed (as in a panel mount fuseholder) or mounted
near other heat producing components, such as resistors,
transformers, etc.
DIMENSIONS: Unless otherwise specified, dimensions
are in inches.
BREAKING CAPACITY: Also known as interrupting rating
or short circuit rating, this is the maximum approved
current which the fuse can safely break at rated voltage.
Please refer to the interrupting rating definition of this
section for additional information.
The fuses in this catalog range in size from the approx.
0402 chip size (.041”L x .020”W x .012”H) up to the 5
AG, also commonly known as a”MIDGET” fuse (13/32”
Dia. x 11/2” Length). As new products were developed
throughout the years, fuse sizes evolved to fill the various
electrical circuit protection needs.
CURRENT RATING: The nominal amperage value of the
fuse. It is established by the manufacturer as a value of
current which the fuse can carry, based on a controlled set
of test conditions (See RERATING).
The first fuses were simple, open-wire devices, followed
in the 1890’s by Edison’s enclosure of thin wire in a lamp
base to make the first plug fuse. By 1904, Underwriters
Laboratories had established size and rating specifications
to meet safety standards. The renewable type fuses and
automotive fuses appeared in 1914, and in 1927 Littelfuse
started making very low amperage fuses for the budding
electronics industry.
Catalog Fuse part numbers include series identification and
amperage ratings. Refer to the FUSE SELECTION GUIDE
section for guidance on making the proper choice.
RERATING: For 25ºC ambient temperatures, it is
recommended that fuses be operated at no more than
75% of the nominal current rating established using the
controlled test conditions. These test conditions are part of
UL/CSA/ANCE (Mexico) 248-14 “Fuses for Supplementary
Overcurrent Protection,” whose primary objective is
to specify common test standards necessary for the
continued control of manufactured items intended for
The fuse sizes in following chart began with the early
“Automobile Glass” fuses, thus the term “AG”. The
numbers were applied chronologically as different
manufacturers started making a new size: “3AG,” for
example, was the third size placed on the market. Other
non-glass fuse sizes and constructions were determined
by functional requirements, but they still retained the
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
6
Revised: Jan 12, 2009
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
length or diameter dimensions of the glass fuses. Their
designation was modified to AB in place of AG, indicating
that the outer tube was constructed from Bakelite, fibre,
ceramic, or a similar material other than glass. The largest
size fuse shown in the chart is the 5AG, or “MIDGET,”
a name adopted from its use by the electrical industry
and the National Electrical Code range which normally
recognizes fuses of 9/16” x 2” as the smallest standard
fuse in use.
Information on other fuse series can be obtained from the
Littelfuse
Fuses listed in accordance with UL/CSA/ANCE 248 are
required to have an interrupting rating of 10,000 amperes
at 125V, with some exceptions (See STANDARDS section)
which, in many applications, provides a safety factor far in
excess of the short circuit currents available.
NUISANCE OPENING: Nuisance opening is most often
caused by an incomplete analysis of the circuit under
consideration.
FUSE SIZES
SIZE
DIAMETER (Inches)
1AG
2AG
3AG
4AG
5AG
7AG
8AG
1/4
–
1/4
9/32
13/32
1/4
1/4
.250
.177
.250
.281
.406
.250
.250
LENGTH (Inches)
5/8
–
11/4
11/4
11/2
7/8
1
Of all the “Selection Factors” listed in the FUSE
SELECTION GUIDE, special attention must be given
to items 1, 3, and 6, namely, normal operating current,
ambient temperature, and pulses.
.625
.588
1.25
1.25
1.50
.875
1
For example, one prevalent cause of nuisance opening in
conventional power supplies is the failure to adequately
consider the fuse’s nominal melting I2t rating. The fuse
cannot be selected solely on the basis of normal operating
current and ambient temperature. In this application, the
fuse’s nominal melting I2t rating must also meet the inrush
current requirements created by the input capacitor of the
power supply’s smoothing filter.
TOLERANCES: The dimensions shown in this catalog
are nominal. Unless otherwise specified, tolerances are
applied as follows. Tolerances do not apply to lead lengths:
± .010” for dimensions to 2 decimal places.
± .005” for dimensions to 3 decimal places.
The procedure for converting various waveforms into I2t
circuit demand is given in the FUSE SELECTION GUIDE.
For trouble -free, long-life fuse protection, it is good design
practice to select a fuse such that the I2t of the waveform
is no more than 20% of the nominal melting I2t rating of
the fuse. Refer to the section on PULSES in the FUSE
SELECTION GUIDE.
Contact Littelfuse should you have questions regarding
metric system and fractional tolerances.
FUSE CHARACTERISTICS: This characteristic of a fuse
design refers to how rapidly it responds to various current
overloads. Fuse characteristics can be classified into three
general categories: very fast-acting, fast-acting, or Slo-Blo®
Fuse. The distinguishing feature of Slo-Blo® fuses is that
these fuses have additional thermal inertia designed to
tolerate normal initial or start-up overload pulses.
RESISTANCE: The resistance of a fuse is usually an
insignificant part of the total circuit resistance. Since the
resistance of fractional amperage fuses can be several
ohms, this fact should be considered when using them
in low-voltage circuits. Actual values can be obtained by
contacting Littelfuse.
FUSE CONSTRUCTION: Internal construction may vary
depending on ampere rating. Fuse photos in this catalog
show typical construction of a particular ampere rating
within the fuse series.
Most fuses are manufactured from materials which have
positive temperature coefficients, and, therefore, it is
common to refer to cold resistance and hot resistance
(voltage drop at rated current), with actual operation being
somewhere in between.
FUSEHOLDERS: In many applications, fuses are
installed in fuseholders. These fuses and their associated
fuseholders are not intended for operation as a “switch”
for turning power “on” and “off “.
Cold resistance is the resistance obtained using a
measuring current of no more than 10% of the fuse’s
nominal rated current. Values shown in this publication for
cold resistance are nominal and representative. The factory
should be consulted if this parameter is critical to the
design analysis.
INTERRUPTING RATING: Also known as breaking
capacity or short circuit rating, the interrupting rating is
the maximum approved current which the fuse can safely
interrupt at rated voltage. During a fault or short circuit
condition, a fuse may receive an instantaneous overload
current many times greater than its normal operating
current. Safe operation requires that the fuse remain intact
(no explosion or body rupture) and clear the circuit.
Hot resistance is the resistance calculated from the
stabilized voltage drop across the fuse, with current equal
to the nominal rated current flowing through it. Resistance
data on all Littelfuse products are available on request.
Fuses can be supplied to specified controlled resistance
tolerances at additional cost.
Interrupting ratings may vary with fuse design and range
from 35 amperes for some 250VAC metric size (5 x 20mm)
fuses up to 200,000 amperes for the 600VAC KLK series.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
7
Revised: Jan 12, 2009
Introduction to Circuit Protection
Transientology
VOLTAGE RATING: The voltage rating, as marked on a
fuse, indicates that the fuse can be relied upon to safely
interrupt its rated short circuit current in a circuit where the
voltage is equal to, or less than, its rated voltage.
SOLDERING RECOMMENDATIONS: Since most fuse
constructions incorporate soldered connections, caution
should be used when installing those fuses intended to
be soldered in place. The application of excessive heat can
reflow the solder within the fuse and change its rating.
Fuses are heat-sensitive components similar to semiconductors, and the use of heat sinks during soldering is
often recommended.
This system of voltage rating is covered by N.E.C.
regulations and is a requirement of Underwriters
Laboratories as a protection against fire risk. The standard
voltage ratings used by fuse manufacturers for most smalldimension and midget fuses are 32, 63, 125, 250 and 600.
In electronic equipment with relatively low output power
supplies, with circuit impedance limiting short circuit
currents to values of less than ten times the current rating
of the fuse, it is common practice to specify fuses with
125 or 250 volt ratings for secondary circuit protection of
500 volts or higher.
As mentioned previously (See RERATING), fuses are
sensitive to changes in current, not voltage, maintaining
their “status quo” at any voltage up to the maximum rating
of the fuse. It is not until the fuse element melts and
arcing occurs that the circuit voltage and available power
become an issue. The safe interruption of the circuit, as it
relates to circuit voltage and available power, is discussed
in the section on INTERRUPTING RATING.
Lead-Free Soldering Parameters (most instances):
Wave Solder — 260ºC, 10 seconds max
Reflow Solder — 260ºC, 30 seconds max
TEST SAMPLING PLAN: Because compliance with certain
specifications requires destructive testing, these tests are
selected on a statistical basis for each lot manufactured.
To summarize, a fuse may be used at any voltage that is
less than its voltage rating without detriment to its fusing
characteristics. Please contact the factory for applications
at voltages greater than the voltage rating.
TIME-CURRENT CURVE: The graphical presentation of
the fusing characteristic, time-current curves are generally
average curves which are presented as a design aid but
are not generally considered part of the fuse specification.
Time-current curves are extremely useful in defining
a fuse, since fuses with the same current rating can
be represented by considerably different time-current
curves. The fuse specification typically will include a life
requirement at 100% of rating and maximum opening
times at overload points (usually 135% and 200% of rating
depending on fuse standard characteristics). A time-current
curve represents average data for the design; how ever,
there may be some differences in the values for any one
given production lot. Samples should be tested to verify
performance, once the fuse has been selected.
DERIVATION OF NOMINAL MELTING I2t: Laboratory
tests are conducted on each fuse design to determine the
amount of energy required to melt the fusing element. This
energy is described as nominal melting I2t and is expressed
as “Ampere Squared Seconds” (A2 Sec.).
A pulse of current is applied to the fuse, and a time
measurement is taken for melting to occur. If melting
does not occur within a short duration of about 8
milliseconds (0.008 seconds) or less, the level of pulse
current is increased. This test procedure is repeated until
melting of the fuse element is confined to within about 8
milliseconds.
The purpose of this procedure is to assure that the heat
created has insufficient time to thermally conduct away
from the fuse element. That is, all of the heat energy (I2t)
is used, to cause melting. Once the measurements of
current (I) and time (t) are determined, it is a simple matter
to calculate melting I2t. When the melting phase reaches
completion, an electrical arc occurs immediately prior to
the “opening” of the fuse element.
UNDERWRITERS LABORATORIES: Reference to “Listed
by Underwriters Laboratories” signifies that the fuses
meet the requirements of UL/CSA/ANCE 248-14 “Fuses
for Supplementary Overcurrent Protection”. Some 32
volt fuses (automotive) in this catalog are listed under
UL Standard 275. Reference to “Recognized under the
Component Program of Underwriters Laboratories”
signifies that the item is recognized under the component
program of Underwriters Laboratories and application
approval is required.
Clearing I2t = Melting I2t + arcing I2t
The nominal I2t values given in this publication pertain to
the melting phase portion of the “clearing” or “opening”.
Alternatively the time can be measured at 10 times of the
rated current and the I2t value is calculated like above.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
8
Revised: Jan 12, 2009
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Fuse Selection Guide
The application guidelines and product data in this guide
are intended to provide technical information that will help
with application design. Since these are only a few of the
contributing parameters, application testing is strongly
recommended and should be used to verify performance in
the circuit/application.
1. NORMAL OPERATING CURRENT: The current rating
of a fuse is typically derated 25% for operation at 25ºC to
avoid nuisance blowing. For example, a fuse with a current
rating of 10A is not usually recommended for operation at
more than 7.5A in a 25ºC ambient. For additional details,
see RERATING in the previous section and AMBIENT
TEMPERATURE below.
Many of the factors involved with fuse selection are listed
below. For additional assistance with choosing fuses
appropriate to you requirements, contact your Littelfuse
products reprentative.:
2. APPLICATION VOLTAGE: The voltage rating of the
fuse must be equal to, or greater than, the available circuit
voltage. For exceptions, see VOLTAGE RATING.
3. AMBIENT TEMPERATURE: The current carrying
capacity tests of fuses are performed at 25ºC and will be
affected by changes in ambient temperature. The higher
the ambient temperature, the hotter the fuse will operate,
and the shorter its life. Conversely, operating at a lower
temperature will prolong fuse life. A fuse also runs hotter
as the normal operating current approaches or exceeds the
rating of the selected fuse. Practical experience indicates
fuses at room temperature should last indefinitely, if
operated at no more than 75% of catalog fuse rating.
Selection Factors
1. Normal operating current
2. Application voltage (AC or DC)
3. Ambient temperature
4. Overload current and length of time in which the
fuse must open
5. Maximum available fault current
6. Pulses, Surge Currents, Inrush Currents, Start-up
Currents, and Circuit Transients
Ambient temperature effects are in addition to the normal
re-rating, see example. Example: Given a normal operating
current of 2.25 amperes in an application using a 229
series fuse at room temperature, then:
7. Physical size limitations, such as length, diameter,
or height
8. Agency Approvals required, such as UL, CSA, VDE,
METI, MITI or Military
Normal Operating Current
Catalog Fuse Rating = ————————————
0.75
- or 2.25 Amperes
——————— = 3 Amp Fuse (at 25ºC)
0.75
9. Fuse features (mounting type/form factor, ease of
removal, axial leads, visual indication, etc.)
10. Fuseholder features, if applicable and associated
rerating (clips, mounting block, panel mount, PC
board mount, R.F.I. shielded, etc.)
This charts shows typical ambient temperature effects on
current carrying capacity of Littelfuse products. For specific
re-rating information, please consult the product data sheet
(www.littelfuse.com) or contact a Littelfuse representative.
11. Application testing and verification prior to
production
Curve A: Thin-Film Fuses and 313 Series (.010 to .150A)
Curve B: FLAT-PAK®, TeleLink®, Nano2®, PICO®, Blade
Terminal and other leaded and catridge fuses
Curve C: Resettable PTC’s
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
9
Revised: Jan 12, 2009
Introduction to Circuit Protection
Transientology
4. OVERLOAD CURRENT CONDITION: The current level
for which protection is required. Fault conditions may be
specified, either in terms of current or, in terms of both
current and maximum time the fault can be tolerated
before damage occurs. Time-current curves should be
consulted to try to match the fuse characteristic to the
circuit needs, while keeping in mind that the curves are
based on average data.
EXAMPLE: Select a 125V, very fast-acting PICO®II fuse that
is capable of withstanding 100,000 pulses of current (I) of
the pulse waveform shown in Figure 1.
The normal operating current is 0.75 ampere at an ambient
temperature of 25ºC.
Step 1 — Refer to Chart 1 and select the appropriate
pulsewaveform, which is waveform (E) in this example.
Place the applicable value for peak pulse current (ip) and
time (t) into the corresponding formula for waveshape (E),
and calculate the result, as shown:
5. MAXIMUM FAULT CURRENT: The Interrupting Rating
of a fuse must meet or exceed the Maximum Fault Current
of the circuit.
1
1
I2t= — (iP) = I2t = — (iP) 2t
5
5
6. PULSES: The general term “pulses” is used in this
context to describe the broad category of wave shapes
referred to as “surge currents”, “start-up currents”, “inrush
currents”, and “transients”. Electrical pulse conditions can
vary considerably from one application to another. Different
fuse constructions may not react the same to a given
pulse condition. Electrical pulses produce thermal cycling
and possible mechanical fatigue that could affect the life
of the fuse. Initial or start-up pulses are normal for some
applications and require the characteristic of a Slo-Blo®
fuse. Slo-Blo® fuses incorporate a thermal delay design
to enable them to survive normal start-up pulses and still
provide protection against prolonged overloads. The startup pulse should be defined and then compared to the timecurrent curve and I2t rating for the fuse. Application testing
is recommended to establish the ability of the fuse design
to withstand the pulse conditions.
1
— x 82 x .004 = 0.0512 A2 Sec.
5
This value is referred to as the “Pulse I2t”.
Step 2 — Determine the required value of Nominal Melting
I2t by referring to Chart 2. A figure of 22% is shown in
Chart II for 100,000 occurrences of the Pulse I2t calculated
in Step 1. This Pulse I2t is converted to its required value of
Nominal Melting I2t as follows:
Nom. Melt I2t = Pulse I2t/.22
0.0512/.22 = 0.2327 A2 Sec.
Step 3 — Examine the I2t rating data for the PICO® II, 125V,
very fast-acting fuse. The part number 251001, 1 ampere
design is rated at 0.256 A2 Sec., which is the minimum
fuse rating that will accommodate the 0.2327 A2 Sec.
value calculated in Step 2. This 1 ampere fuse will also
accommodate the specified 0.75 ampere normal operating
current, when a 25% derating factor is applied to the 1
ampere rating, as previously described.
Nominal melting I2t is a measure of the energy required
to melt the fusing element and is expressed as “Ampere
Squared Seconds” (A2 Sec.). This nominal melting I2t,
and the energy it represents (within a time duration of
8 milliseconds [0.008 second] or less and 1 millisecond
[0.001 second]or less for thin film fuses), is a value that is
constant for each different fusing element. Because every
fuse type and rating, as well as its corresponding part
number, has a different fusing element, it is necessary to
determine the I2t for each. This I2t value is a parameter of
the fuse itself and is controlled by the element material
and the configuration of the fuse element. In addition
to selecting fuses on the basis of “Normal Operating
Currents”, “Rerating”, and “Ambient Temperature” as
discussed earlier, it is also necessary to apply the I2t
design approach. This nominal melting I2t is not only a
constant value for each fuse element design, but it is also
independent of temperature and voltage. Most often, the
nominal melting I2t method of fuse selection is applied to
those applications in which the fuse must sustain large
current pulses of a short duration. These high-energy
currents are common in many applications and are critical
to the design analysis.
7. PHYSICAL SIZE LIMITATIONS: Please refer to the
product dimensions presented in current Littelfuse product
data sheets for specific information.
8. AGENCY APPROVALS: For background information
about common standards, please consult the STANDARDS
section of this guide or visit our Design Support web
site (http://www.littelfuse.com/design-support.html).
For specific agency approval information for each Littelfuse
product, please refer to the data sheets within this catalog
and information presented on www.littelfuse.com. As
agency approvals and standards may change, please rely
on the information presented on www.littelfuse.com as
current information.
9. FUSE FEATURES: Please consult the specific product
features presented within this catalog and on our web site
(http://www.littelfuse.com). For additional information and
support contact your Littelfuse product representative.
The following example should assist in providing a better
understanding of the application of I2t.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
10
Revised: Jan 12, 2009
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
FIGURE 1
CHART 1
WAVESHAPES
ip
A
FORMULAS
i=k
I2t = ip2 t
t
ib
Current (Amperes)
10
ip
B
8
6
l2 t
Pulse
Energy
.001
i = ip-kt
I2t = (1/3)(ip2 + ipib + ib2) t
t
i = ip sin t
I2t = (1/2) ip2 t
ip
C
4
2
t
Normal Operating Current
ip
D
I2t = (1/3) ip2 t
t
.002 .003 .004 .005
Time (Seconds)
.006
ip
E
10. FUSEHOLDER FEATURES AND RERATING: For
information about the range of Littelfuse fuseholders and
specific features and characteristics, please consult with
a Littelfuse products representative or visit our web site
(http://www.littelfuse.com).
i = kt2 OR i = ip(1-kt) 2
I2t = (1/5) ip2 t
OR
t
t
ip
F
t1
For 25ºC ambient temperatures, it is recommended that
fuseholders be operated at no more than 60% of the
nominal current rating established using the controlled test
conditions specified by Underwriters Laboratories. The
primary objective of these UL test conditions is to specify
common test standards necessary for the continued
control of manufactured items intended for protection
against fire, etc. A copper dummy fuse is inserted in
the fuseholder by Underwriters Laboratories, and then
the current is increased until a certain temperature rise
occurs. The majority of the heat is produced by the contact
resistance of the fuseholder clips. This value of current
is considered to be the rated current of the fuseholder,
expressed as 100% of rating. Some of the more common,
everyday applications may differ from these UL test
conditions as follows: fully enclosed fuseholders, high
contact resistance,air movement, transient spikes, and
changes in connecting cable size (diameter and length).
Even small variations from the controlled test conditions
can greatly affect the ratings of the fuse-holder. For
this reason, it is recommended that fuseholders be
derated by 40% (operated at no more than 60% of the
nominal current rating established using the Underwriter
Laboratories test conditions, as previously stated).
i = ipe–kt)
I2t (1/2) ip2 t1
CHART 2
PULSE CYCLE WITHSTAND CAPABILITY
100,000 Pulses
Pulse I2t = 22% of Nominal Melting I2t
10,000 Pulses
Pulse I2t = 29% of Nominal Melting I2t
1,000 Pulses
Pulse I2t = 38% of Nominal Melting I2t
100 Pulses
Pulse I2t = 48% of Nominal Melting I2t
100000
Number of Pulses
10000
11. TESTING: The factors presented here should be
considered in selecting a fuse for a given application. The
next step is to verify the selection by requesting samples
for testing in the actual circuit. Before evaluating the
samples, make sure the fuse is properly mounted with
good electrical connections, using adequately sized wires
or traces. The testing should include life tests under normal
conditions and overload tests Under fault conditions, to
ensure that the fuse will operate properly in the circuit.
1000
100
10%
Pulse I 2t / Average Melting I2t
100%
Note: Adequate time (10 seconds) must exist between pulse events
to allow heat from the previous event to dissipate.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
11
Revised: Jan 12, 2009
Introduction to Circuit Protection
Transientology
Standards
Littelfuse is at your service to help solve your electrical
protection problems. When contacting Littelfuse sales
engineers, please have all the requirements of your
applications available. Requests for quotes or assistance
in designing or selecting special types of circuit protection
components for your particular applications are also
welcome. In the absence of special requirements,
Littelfuse reserves the right to make appropriate changes
in design, process, and manufacturing location without
prior notice.
UL 275 AUTOMOTIVE GLASS TUBE FUSES (32 Volts)
UL LISTED
UL ampere ratings tests are conducted at 110%, 135%,
and 200%. Interrupting rating tests are not required.
CSA Certification
CSA Certification in Canada is equivalent to UL Listing in
the United States.
Fuse ratings and other performance criteria are evaluated
under laboratory conditions and acceptance criteria, as
defined in one or more of the various fuse standards. It is
important to understand these standards so that the fuse
can be properly applied to circuit protection applications.
The Component Acceptance Program of CSA is
equivalent to the Recognition Program at UL.
METI (Japan Ministry of Economy, Trade and Industry)
METI approval in Japan is similar to UL Recognition in the
United States.
UL LISTED
METI B has its own design standard and characteristics.
A UL Listed fuse meets all the requirements of the UL/
CSA/ANCE 248-14 Standard. Following are some of the
requirements. UL ampere rating tests are conducted at
100%, 135%, and 200% of rated current. The fuse must
carry 100% of its ampere rating and must stabilize at a
temperature that does not exceed a 75ºC rise.
INTERNATIONAL ELECTROTECHNICAL
COMMISSION (IEC)
Publication 60127, Parts 1, 2, 3, 4, 6
The IEC organization is different from UL and CSA, since
IEC only writes specifications and does not certify. UL
and CSA write the specifications, and are responsible for
testing and certification.
The fuse must open at 135% of rated current within one
hour. It also must open at 200% of rated current within 2
minutes for 0-30 ampere ratings and 4 minutes for 35-60
ampere ratings.
Certification to IEC specifications are given by such
organizations as SEMKO (Swedish Institute of Testing
and Approvals of Electrical Equipment) , BSI (British
Standards Institute)
and VDE (German Standard Insitute)
, as well as UL and CSA.
The interrupting rating of a UL Listed fuse is 10,000
amperes AC minimum at 125 volts. Fuses rated at 250
volts may be listed as interrupting 10,000 amperes at 125
volts and, at least, the minimum values shown below at
250 volts.
Ampere Rating of
Fuse
0 to 1
1.1 to 3.5
3.6 to 10
0.1 to 15
15.1 to 30
METI APPROVAL
PS
E
UL/CSA/ANCE (Mexico) 248-14 FUSES FOR
SUPPLEMENTARY OVERCURRENT PROTECTION (600 Volts,
Maximum) (Previously UL 198G and CSA C22.2, No. 59)
Interrupting Rating
In Amperes
35
100
200
750
1500
V
D
E
IEC Publication 60127 defines three breaking capacity
levels (interrupting rating). Low breaking capacity fuses
must pass a test of 35 amperes or ten times rated current,
whichever is greater, while enhanced breaking capacity
fuses must pass a test of 150 amperes and high breaking
capacity fuses must pass a test of 1500 amperes.
Voltage Rating
250 VAC
250 VAC
250 VAC
250 VAC
250 VAC
60127 Part 2
Sheet 1 — Type F Quick Acting, High Breaking Capacity
Recognized Under the Component Program of
Underwriters Laboratories
Sheet 2 — Type F Quick Acting, Low Breaking Capacity
Sheet 3 — Type T Time Lag, Low Breaking Capacity
The Recognized Components Program of UL is different
from UL Listing. UL will test a fuse to a specification
requested by the manufacturer. The test points can be
different from the UL Listed requirements if the fuse
has been designed for a specific application. Application
approval is required by UL for fuses recognized under the
Component Program.
Sheet 4 — Style Fuses 1/4 x 1 1/4
Sheet 5 — Type T Time Lag, High Breaking Capacity
Sheet 6 — Type T Time Lag, Enhanced Breaking Capacity
The letters ‘F’ and ‘T’ represent the time-current
characteristic of the fast-acting and time delay fuses. One
of these letters will be marked on the end cap of the fuse.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
12
Revised: Jan 12, 2009
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
is greater. Parts rated at 125 volts must pass a test of 50
amperes or ten times rated current, whichever is greater.
Parts rated at 250 volts are further defined as either low,
intermediate or high breaking. The low breaking capacity
fuses must pass a test of 100 amperes rated current, while
intermediate breaking capacity fuses must pass a test of
500 amperes and high breaking capacity fuses must pass a
test of 1500 amperes.
UL/CSA/ANCE (Mexico) 248-14 vs. IEC 60127 Part 2
FUSE OPENING TIMES vs. METI/MITI
Percent of UL & CSA IEC TYPE F IEC TYPE F IEC TYPE T IEC TYPE T METI/MITI
Rating STD 248-14 Sheet 1 (*) Sheet 2 (*) Sheet 3 (*) Sheet 5 (*)
110
4Hr.Min.
—
—
—
—
130
—
—
—
—
—
135
60 Minutes
Max.
—
—
—
—
150
—
160
—
200
2 Minutes
Max.
210
—
1Hr.Min.
60 Minutes 60 Minutes 60 Minutes 60 Minutes
Max.
Max.
Max.
Max.
—
—
—
—
—
—
MILITARY/FEDERAL STANDARDS
—
1Hr.Max.
—
2 Minutes
Max.
MIL-PRF-15160 and MIL-PRF-23419
These specifications govern the construction and
performance of fuses suitable primarily for military
electronic applications.
30 Minutes 30 Minutes 2 Minutes 30 Minutes
Max.
Max.
Max.
Max.
(*) Note: The IEC Specification is written up to 10.0A. Any
components above these ratings are not recognized by
the IEC (although the fuses may have similar opening
characteristics).
MIL-PRF-19207
This specification governs the construction and
performance of fuseholders suitable for military
applications.
IEC also has opening time requirements at 275%, 400%
and 1000%; however, the chart is used to show that
fuses with the same ampere rating made to different
specifications are not interchangeable. According to the
IEC 60127 Standard, a one ampere-rated fuse can be
operated at one ampere. A one ampere-rated fuse made
to UL/CSA/ANCE 248-14 should not be operated at more
than .75 ampere (25% derated — See RERATING section
of FUSEOLOGY).
DSSC Drawing #87108
This drawing governs the construction and performance
of .177” x .570” (2AG size) cartridge fuses and axial lead
versions suitable for military applications. DSSC #87108
designation is included in the fuse end cap marking.
FEDERAL SPECIFICATION W-F-1814
This specification governs the construction and
performance of fuses with high interrupting ratings that are
approved for federal applications. Fuses approved to these
specifications are on the Federal Qualified Products List.
METI B does not differentiate between fast acting and time
delay characteristics.
Publication IEC 60127-4 (Universal Modular Fuse-Links
[UMF])
This part of IEC 60127-4 covers both PCB through-hole
and surface mount fuses. This standard covers fuses rated
32, 63, 125, and 250 volts. This standard will be accepted
by UL/CSA making it the first global fuse standard. This
specification uses different fusing gates than IEC 60127-2;
the gates used here are 125%, 200%, and 1000%.
The fuses must not open in less than one hour at 125%
of rated current and open within two minutes at 200% of
rated current. The 1000% overload is used to determine
the fuse characteristic. The opening time for each rating is
listed below.
Type FF : Less than 0.001 sec.
Type F
: From 0.001 - 0.01 sec.
Type T
: From 0.01 - 0.1 sec.
Type TT : From 0.1 - 1.00 sec.
These characteristics correlate to the terminology used in
IEC 60127-1.
Breaking capacity (interrupting rating) varies based on
voltage rating. Parts rated at 32 & 63 volts must pass a
test of 35 amperes or ten times rated current, whichever
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
13
Revised: Jan 12, 2009
Introduction to Circuit Protection
Transientology
Write to the following agencies for additional information
on standards, approvals, or copies of the specifications.
Underwriters Laboratories Inc. (UL)
333 Pfingsten Road
Northbrook, Illinois, USA
60062-2096
Canadian Standards Association (CSA)
5060 Spectrum Way, Suite 100
Mississauga, Ontario, Canada
L4W 5N6
International Electrotechnical Commission (IEC)
3, Rue de Varembe
1211 Geneva 20
Switzerland
Naval Publications and Military StandardsForm
Center (for Military and Federal Standards)
5801 Tabor Avenue
Philadelphia, Pennsylvania, USA
19120
Defense Supply Center Columbus (DSCC)
3990 East Broad Street
Columbus, Ohio, USA
43218-3990
Ministry of Economy Trade and Industry (METI)
1-3-1 Kasumigaseki
Chiyouda-ku
Tokyo 100-8901, Japan
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
14
Revised: Jan 12, 2009
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Packaging and Part Numbering
Littelfuse Fuse Products Traditional Part Numbering System
0XXX XXXX X
X XXXXXX
Options Codes *
Packaging Type *
Product Series Code
Packaging Quantity Code *
Example:
437 series fuse is “0437”
Ampere Rating Code
Decimal is to far right for whole number
amp ratings, to far left for ratings less than
one, and within center for fractional amp ratings.
Examples:
10A fuse is “010.”
1/4A or 0.25A fuse is “.250”
1 1/2A or 1.5A fuse is “01.5”
1 1/4A or 1.25A fuse is “1.25”
A/X
V
T
S
L
1
5
10
20
50
H
F
G
U
M
100
200
250
500
1000
D
P
E
W
Y
1500
2000
2500
3000
4000
N
K
J
Z
5000
10000
12000
Misc.
A
B
C
R
X
Ammo packed
Bubble packed
Chip packed
Reeled
Filler
RT1
RT2
RT3
E
ID
L
P
Reel and Tape, 2.062in (52.4mm) lead spacing
Reel and Tape, 2.50 in (63.5mm) lead spacing
Reel and Tape, 2.874 in (73mm) lead spacing
Pigtail lead type fuse
Indicating fuse
RoHS compliant
Lead-free
* Not all options and codes listed here are available for all products.
For information about the specific options available for any Littelfuse product,
please refer to the packaging details information within each product data sheet
or contact your Littelfuse products representative.
Tape and Reel packaging per EIA-296:
Tape width is defined as the width of the tape and reeled fuse (x) as measured from inside tape to inside tape.
Pitch is defined as the space between two tape and reeled fuses (y) as measured from lead to lead.
Refer to the Electrical Characteristics tables
presented in each product data sheet
for specific amp rating codes
x
y
Littelfuse Wickmann Products Part Numbering System
22
5
(# !&"!
!
/"(("
!&$&/
5
,"))+, ', .
,"))+, '
,"))+, '
,+(("""(
5
0(', .
0(', ..%+-/("!.
5
0('
, .(+*$("!.
5
0(', .+*(3 6
/,"&*0(', .+*(3& +#0."
0('
, .+*(3& +#0."
0./+)&4"!
$!&
5
/*!-!(+*$("!.))
(+*$("!.))
/*!-!
1-3&*$,-+!0 /&+*
0-# "+0*/(&./"-/,"
2, .
.%+-/("!.))
.%+-/("!.)).," &()+!"(
$%"!
)
&'$$!&#&"!
"
!&$&/
)
)
7 7 7 "2),("!&$&/
)
)
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
15
Revised: Jan 12, 2009
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
16
Revised: Jan 12, 2009
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Surface Mount Fuses
Ceramic Fuse > 437 Series
437 Series – 1206 Fast-Acting Fuse
Description
This 100% Lead Free, RoHS compliant and Halogen Free
fuse series has been designed specifically to provide over
current protection to circuits that see high working ambient
temperatures (up to 150ºC).
In addition to this, the high i²t values typical of the
Littelfuse Ceramic fuse family ensure high inrush current
withstand capability.
Features
Agency Approvals
AGENCY
AGENCY FILE NUMBER
AMPERE RANGE
E10480
0.250A ~ 8A
E10480
0.250A ~ 8A
LR29862
0.250A ~ 8A
t 0QFSBUJOH5FNQFSBUVSF
-55ºCto +150ºC
t -FBE'SFFBOE
RoHS compliant
Applications
Electrical Characteristics for Series
% of Ampere
Rating
Ampere Rating
Opening Time at 25ºC
100%
0.250A ~ 8A
4 hours Minimum
250%
0.750A ~ 8A
5 secs. Maximum
350%
0.250A ~ 0.500A
5 secs. Maximum
350%
0.750A ~ 8A
1 sec. Maximum
t 4VJUBCMFGPSCPUIMFBEFE
and lead-free reflow /
wave soldering
437 Series
The general design ensures excellent temperature stability
and performance reliability.
t "VUPNPUJWF&MFDUSPOJDT
t 1SJOUFST
t -$%%JTQMBZT
t 4DBOOFST
t 4FSWFST
t %BUB.PEFNT
Electrical Specifications by Item
Ampere
Max.
Amp
Rating
Voltage
Code
(A)
Rating (V)
250mA
375mA
500mA
750mA
1A
1.25A
1.5A
1.75A
2A
2.5A
3A
3.5A
4A
5A
7A
8A
.250
.375
.500
.750
001.
1.25
01.5
1.75
002.
02.5
003.
03.5
004.
005.
007.
008.
125
125
63
63
63
63
63
63
63
32
32
32
32
32
32
32
Interrupting Rating
50 A @ 125 V AC/DC
50 A @ 63 V AC/DC
50 A @ 32 V AC/DC
Nominal Nominal Voltage Nominal Power Agency Approvals
Nominal
Drop At Rated
Dissipation At
Resistance Melting I2t
(A2Sec.)3
Current (V)4
Rated Current (W)
(Ohms)2
2.290
1.330
0.908
0.665
0.360
0.318
0.209
0.0703
0.058
0.043
0.033
0.027
0.022
0.016
0.010
0.0084
0.003
0.010
0.018
0.064
0.100
0.256
0.324
0.075
0.144
0.225
0.400
0.576
1.024
1.936
4.900
6.400
Notes:
1. AC Interrupt Rating tested at rated voltage with unity power factor. DC Interrupt Rating
tested at rated voltage with time constant <0.8 msec.
2. Nominal Resistance measured with <10% rated current.
3. Nominal Melting I²t measured at 1 msec opening time.
4. Nominal Voltage Drop measured at rated current after temperaturehas stabilized.
0.78
0.60
0.52
0.45
0.41
0.40
0.39
0.27
0.17
0.14
0.15
0.16
0.16
0.09
0.11
0.067
0.195
0.225
0.260
0.335
0.415
0.496
0.579
0.474
0.345
0.363
0.462
0.560
0.618
0.484
0.760
0.539
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Devices designed to carry rated current for 4 hours minimum. Itis recommended that
devices be operated continuously at no morethan 80% rated current. See “Temperature
Re-Rating Curve”for additional re-rating information.
Devices designed to be mounted with marking code facing up.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/437.html for current information.
17
Revised: May 22, 2009
437 Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
Ceramic FuseTransientology
> 437 Series
7.0A
8.0A
.750A
1.0A
1.25
1.5A
1.75
2.0A
2.5A
3.0A
3.5A
4.0A
5.0A
100
140
120
10
100
80
TIME IN SECONDS
PERCENT OF RATING
.375A
.500A
Average Time Current Curves
.250A
Temperature Rerating Curve
60
40
-65
-45
-25
-5
15
35
55
75
95
115
135
155
TEMPERATURE (°C)
1
0.1
Note:
0.01
1. Derating depicted in this curve is in addition to the standard derating of 20% for
continuous operation.
Example:
For continuous operation at 75 degrees celsius, the fuse should be deratedas follows:
I = (0.80)(0.85)IRAT = (0.68)IRAT
0.001
1
0.1
10
100
CURRENT IN AMPS
Soldering Parameters
Pre Heat
Pb – Free assembly
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 180 secs
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
10 – 30 seconds
Ramp-down Rate
6°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
260°C
Wave Soldering
tP
TP
Critical Zone
TL to TP
Ramp-up
TL
TS(max)
Temperature
Reflow Condition
tL
Ramp-down
TS(min)
Preheat
tS
25
time to peak temperature
(t 25ºC to peak)
Time
260°C, 10 seconds max.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
437 Series
18
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/437.html for current information.
Surface Mount Fuses
Ceramic Fuse > 437 Series
Product Characteristics
Body: Advanced Ceramic
Terminations: Ag / Ni / Sn (100% Lead-Free)
Element Cover Coating: Lead-Free Glass
Materials
Moisture
IPC/JEDEC J-STD-020C, Level 1
Sensitivity Level
Moisture Resistance
MIL-STD-202, Method 106G
Thermal Shock
MIL-STD-202, Method 107G,
Condition B
Mechanical Shock
MIL-STD-202, Method 213B,
Condition A
Vibration
MIL-STD-202, Method 201A
Vibration,
High Frequency
MIL-STD-202, Method 204D,
Condition D
IPC/EIC/JEDEC J-STD-002B, Condition B
Humidity Test
MIL-STD-202, Method 103B, Conditions D
ESD Immunity
IEC 61000-4-2, 8KV Direct
IPC/EIC/JEDEC J-STD-002B,
Condition D
Resistance to
Solder Heat
Dissolution of
Metallization
MIL-STD-202, Method 210F, Condition B
Terminal Strength
IEC 60127-4
Dimensions
437 Series
Solderability
Part Marking System
1.000
[.039]
1.620 + 0.1829 / -0.173
[0.0638 + 0.0072 / -0.0068]
3.200 ± 0.1778
[0.126 ± 0.007]
Amp Code
Marking Code
.250
D
.375
E
.500
F
.750
G
001.
H
N
0.8179 + 0.046 / -0.076
[0.0332 + 0.0018 / -0.003]
2
1.25
J
01.5
K
1.75
L
002.
N
02.5
O
003.
P
03.5
R
004.
S
005.
T
007.
W
008.
X
0.520 ± 0.200
[0.020 ± 0.08]
1.000
[0.039]
Part Numbering System
1.500
[0.059]
0437 008. W R
SERIES
1.800
[0.071]
PACKING CODE
R = Reel Pack
AMP CODE
3.500
[0.138]
QUANTITY CODE
W = 3000 pcs
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
8mm Tape and Reel
EIA-481-1 (IEC 286, part 3)
3000
WR
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/437.html for current information.
19
437 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
20
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Surface Mount Fuses
Ceramic Fuse > 438 Series
438 Series – 0603 Fast-Acting Fuse
Description
This 100% Lead Free, RoHS compliant and Halogen Free
fuse series has been designed specifically to provide over
current protection to circuits that see high working ambient
temperatures (up to 150ºC).
In addition to this, the high i²t values typical of the
Littelfuse Ceramic fuse family ensure high inrush current
withstand capability.
Features
Agency Approvals
AGENCY
AGENCY FILE NUMBER
AMPERE RANGE
E10480
0.250A ~ 6A
E10480
0.250A ~ 6A
LR29862
0.250A ~ 6A
t 0QFSBUJOH5FNQFSBUVSF
-55ºCto +150ºC
t -FBE'SFF3P)4
compliant and HalogenFree
Applications
Electrical Characteristics for Series
% of Ampere
Rating
Ampere Rating
100%
0.250A ~ 6A
4 Hours Minimum
250%
0.250A ~ 6A
5 Seconds Maximum
t 4VJUBCMFGPSCPUIMFBEFE
and lead-free reflow /
wave soldering
438 Series
The general design ensures excellent temperature stability
and performance reliability.
Opening Time at 25ºC
t )BOEIFME&MFDUSPOJDT
t )BSE%JTL%SJWFT
t -$%%JTQMBZT
t 4%.FNPSZ$BSET
t #BUUFSZ1BDLT
t "VUPNPUJWF&MFDUSPOJDT
Electrical Specifications by Item
Ampere
Max.
Amp
Rating
Voltage
Code
(A)
Rating (V)
250mA
375mA
500mA
750mA
1A
1.25A
1.5A
1.75A
2A
2.5A
3A
3.5A
4A
5A
6A
.250
.375
.500
.750
001.
1.25
01.5
1.75
002.
02.5
003.
03.5
004.
005.
006.
32
32
32
32
32
32
32
32
32
32
32
32
32
32
24
Interrupting Rating
50 A @ 32 VDC
50 A @ 24 VDC
Nominal Nominal Voltage Nominal Power Agency Approvals
Nominal
Drop At Rated
Dissipation At
Resistance Melting I2t
(A2Sec.)3
Current (V)4
Rated Current (W)
(Ohms)2
2.024
1.247
0.829
0.466
0.310
0.200
0.174
0.125
0.0440
0.0324
0.0252
0.0203
0.0169
0.0113
0.0087
0.0017
0.0041
0.0100
0.0281
0.0593
0.0510
0.0902
0.1440
0.1490
0.1977
0.2922
0.4752
0.6920
0.7398
1.3838
0.550
0.488
0.486
0.378
0.351
0.365
0.368
0.360
0.107
0.095
0.093
0.082
0.079
0.074
0.072
0.138
0.183
0.243
0.284
0.351
0.456
0.552
0.540
0.214
0.238
0.279
0.287
0.316
0.370
0.432
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Notes:
Devices designed to carry rated current for 4 hours minimum. Itis recommended that
devices be operated continuously at no morethan 80% rated current. See “Temperature
Re-Rating Curve”for additional re-rating information.
1. AC Interrupt Rating tested at rated voltage with unity power factor. DC Interrupt Rating
tested at rated voltage with time constant <0.8 msec.
2. Nominal Resistance measured with <10% rated current.
Devices designed to be mounted with marking code facing up.
3. Nominal Melting I²t measured at 1 msec opening time.
4. Nominal Voltage Drop measured at rated current after temperaturehas stabilized.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/438.html for current information.
21
Revised: May 20, 2009
438 Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
Ceramic FuseTransientology
> 438 Series
100
120
10
100
80
TIME IN SECONDS
PERCENT OF RATING
140
0.750A
1.00A
1.25A
1.50A
1.75A
2.0A
2.5A
3.0A
3.5A
4A
5A
6A
0.250A
Average Time Current Curves
0.375A
0.500A
Temperature Rerating Curve
60
40
-65
-45
-25
-5
15
35
55
75
95
115
135
155
TEMPERATURE (°C)
Note:
1
0.1
0.01
1. Derating depicted in this curve is in addition to the standard derating of 20% for
continuous operation.
Example:
For continuous operation at 75 degrees celsius, the fuse should be deratedas follows:
0.001
0.1
I = (0.80)(0.85)IRAT = (0.68)IRAT
1
10
100
CURRENT IN AMPS
Soldering Parameters
Pre Heat
Pb – Free assembly
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 180 secs
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
10 – 30 seconds
Ramp-down Rate
6°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
260°C
Wave Soldering
tP
TP
Critical Zone
TL to TP
Ramp-up
TL
TS(max)
Temperature
Reflow Condition
tL
Ramp-down
TS(min)
Preheat
tS
25
time to peak temperature
(t 25ºC to peak)
Time
260°C, 10 seconds max.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
438 Series
22
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/438.html for current information.
Surface Mount Fuses
Ceramic Fuse > 438 Series
Product Characteristics
Body: Advanced Ceramic
Terminations: Ag / Ni / Sn (100% Lead-Free)
Element Cover Coating: Lead-Free Glass
Materials
Moisture
IPC/JEDEC J-STD-020C, Level 1
Sensitivity Level
Moisture Resistance
MIL-STD-202, Method 106G
Thermal Shock
MIL-STD-202, Method 107G,
Condition B-3
Mechanical Shock
MIL-STD-202, Method 213B,
Condition A
Vibration
MIL-STD-202, Method 201A
Vibration,
High Frequency
MIL-STD-202, Method 204D,
Condition D
IPC/EIC/JEDEC J-STD-002B, Condition B
Humidity
MIL-STD-202, Method 103B, Conditions D
ESD Immunity
IEC 61000-4-2, 8KV Direct
IPC/EIC/JEDEC J-STD-002B,
Condition D
Resistance to
Solder Heat
Dissolution of
Metallization
MIL-STD-202, Method 210F, Condition B
Terminal Strength
IEC 60127-4
Dimensions
438 Series
Solderability
Part Marking System
0.530 +/- 0.150
[0.021 +/- 0.006]
Amp Code
Marking Code
.250
D
1.582 ± 0.152
[0.0623 ± 0.006]
0.828 ± 0.152
[0.0326 ± 0.006]
0.516 ± 0.0635
[0.0203 ± 0.0025]
0.432 +/- 0.150
[0.017 +/- 0.006]
0.60
[0.024]
.375
E
.500
F
.750
G
001.
H
1.25
J
01.5
K
1.75
L
002.
N
02.5
O
003.
P
03.5
R
004.
S
005.
T
006.
U
0.74
[0.029]
Part Numbering System
0438 005. W R
1.00
[0.039]
SERIES
PACKING CODE
R = Reel Pack
AMP CODE
1.94
[0.076]
QUANTITY CODE
W = 3000 pcs
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
8mm Tape and Reel
EIA-481-1 (IEC 286, part 3)
3000
WR
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/438.html for current information.
23
438 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
24
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Surface Mount Fuses
Ceramic Fuse > 501 Series
501 Series – High Current 1206 Fast-Acting Fuse
Description
This 100% Lead Free, RoHS compliant and Halogen Free
fuse series has been designed specifically to provide over
current protection to circuits that see high working ambient
temperatures (up to 150°C).
In addition to this, the high i2t values typical of the
Littelfuse Ceramic fuse family ensure high inrush current
withstand capability.
Agency Approvals
AGENCY
Features
AGENCY FILE NUMBER
AMPERE RANGE
E10480
15 ~ 20
E10480
15 ~ 20
LR29862
15 ~ 20
t 0QFSBUJOH5FNQFSBUVSF
-55ºCto +150ºC
t %FTJHOFEUPQSPWJEF
over current protection
in high current voltage
regulator module (VRM)
applications
501 Series
The general design ensures excellent temperature stability
and performance reliability.
t -FBE'SFFBOE
RoHS compliant
t 4VJUBCMFGPSCPUIMFBEFE
and lead-free reflow /
wave soldering
Applications
Electrical Characteristics for Series
% of Ampere
Rating
Ampere Rating
100%
15A ~ 20A
4 hours Minimum
350%
15A ~ 20A
5 secs. Maximum
t 7PMUBHF3FHVMBUPS
Module (VRM)
Equipment
Opening Time at 25ºC
Electrical Specifications by Item
Ampere
Rating
(A)
Amp
Code
Nominal
Nominal
Max. Voltage
Interrupt Rating
Resistance Melting I2T
Rating
(DC)1
2
(Ohms)
(A2Sec.)3
(V)
20A
020.
24
15A
015.
24
150 A @ 24 V DC
Nominal Voltage
Drop At Rated
Current (V)4
Nominal Power Agency Approvals
Dissipation At
Rated Current (W)
0.002
38.5
0.135
2.70
x
x
0.0028
18.5
0.110
1.65
x
x
Notes:
Devices designed to carry rated current for 4 hours minimum. It is recommended that
devices be operated continuously at no more than 80% rated current. See “Temperature
Re-Rating Curve”for additional re-rating information.
1. DC Interrupt Rating tested at rated voltage with time constant <0.8 msec.
2. Nominal Resistance measured with <10% rated current.
3. Nominal Melting I2t measured at 1 msec opening time. For other I2t data refer to chart.
Devices designed to be mounted with marking code facing up.
4. Nominal Voltage Drop measured at rated current after temperaturehas stabilized.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/501.html for current information.
25
Revised: Mar 10, 2009
501 Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
Ceramic FuseTransientology
> 501 Series
Average Time Current Curves
100.000
140
120
10.000
100
80
Time (Seconds)
PERCENT OF RATING
15A
20A
Temperature Rerating Curve
60
40
-65
-45
-25
-5
15
35
55
75
95
115
135
155
TEMPERATURE (°C)
Note:
1.000
0.100
0.010
1. Derating depicted in this curve is in addition to the standard derating of 20% for
continuous operation.
Example:
For continuous operation at 75 degrees celsius, the fuse should be deratedas follows:
0.001
I = (0.80)(0.85)IRAT = (0.68)IRAT
1
10
100
1000
Current (Ampere)
Soldering Parameters
Pre Heat
Pb – Free assembly
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 180 secs
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
10 – 30 seconds
Ramp-down Rate
6°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
260°C
Wave Soldering
tP
TP
Critical Zone
TL to TP
Ramp-up
TL
TS(max)
Temperature
Reflow Condition
tL
Ramp-down
TS(min)
Preheat
tS
25
time to peak temperature
(t 25ºC to peak)
Time
260°C, 10 seconds max.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
501 Series
26
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/501.html for current information.
Surface Mount Fuses
Ceramic Fuse > 501 Series
Product Characteristics
Body: Advanced Ceramic
Terminations: Ag / Ni / Sn (100% Lead-Free)
Element Cover Coating: Lead-Free Glass
Materials
Moisture
IPC/JEDEC J-STD-020C, Level 1
Sensitivity Level
Moisture Resistance
MIL-STD-202, Method 106G
Thermal Shock
MIL-STD-202, Method 107G,
Condition B
Mechanical Shock
MIL-STD-202, Method 213B,
Condition A
Vibration
MIL-STD-202, Method 201A
Vibration,
High Frequency
MIL-STD-202, Method 204D,
Condition D
IPC/EIC/JEDEC J-STD-002B, Condition B
Humidity Test
MIL-STD-202, Method 103B, Conditions D
ESD Immunity
IEC 61000-4-2, 8KV Direct
IPC/EIC/JEDEC J-STD-002B,
Condition D
Resistance to
Solvents
Dissolution of
Metallization
MIL-STD-202, Method 210F, Condition B
Terminal Strength
IEC 60127-4
Dimensions
501 Series
Solderability
Part Marking System
3.118 ± .200
[.123 ± .008]
20
0.75
[.030]
Amp Code
Marking Code
020.
20
015.
15
1.670 ± .130
[.066 ± .005]
Part Numbering System
0501 020. W R
0.835 ± .150
[.033 ± .006]
SERIES
TERMINATION
AMP CODE
PACKING CODE
R = Reel Pack
QUANTITY CODE
W = 3000 pcs
0.520 ± .200
[.020 ± .008]
1.000
[0.039]
1.500
[0.059]
1.800
[0.071]
3.500
[0.138]
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
8mm Tape and Reel
EIA-481-1 (IEC 286, part 3)
3000
WR
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/501.html for current information.
27
501 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
28
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Surface Mount Fuses
Thin Film > 1206 Size > Very Fast-Acting > 466 Series
466 Series Fuse
Description
The 466 Series Fast-Acting Surface Mount Fuse (SMF)
is a small (1206 size) thin-film device designed for
secondary protection of circuits used in space constrained
applications such as hand-held portable electronic devices.
Features
Agency Approvals
AGENCY
AGENCY FILE NUMBER
AMPERE RANGE
E10480
125MA - 5A
LR29862
125MA - 5A
Opening Time at 25OC
100%
4 hours, Minimum
200%
5 sec., Maximum
300%
0.2 sec., Maximum
t &MFNFOUDPWFSJOH
material is resistant
to industry standard
cleaning operations.
t 1SPEVDUJTNBSLFEPO
top surface with code to
allow amperage rating
identification without
testing.
t .PVOUJOHQBEBOE
electrical performance is
identical to Littelfuse 429
and 433 Series products.
t -PXQSPmMFGPSIFJHIU
sensitive applications.
Electrical Characteristics for Series
% of Ampere
Rating
t 1SPEVDUJTDPNQBUJCMF
with lead-free solders
and higher temperature
profiles.
t 'MBUUPQTVSGBDFGPSQJDL
and-place operations.
466 Series
This series is 100% lead-free and meets the requirements
of the RoHS directive. New Halogen-Free 466 Series
fuses are available–to order use the “HF” suffix. See Part
Numbering section for additional information.
t "MMPZCBTFEFMFNFOU
construction provides
superior inrush withstand
characteristics (I2t) over
ceramic or glass based
1206 chip fuse products.
Applications
Secondary protection for space constrained applications:
t $FMMQIPOFT
t %7%QMBZFST
t #BUUFSZQBDLT
t )BSEEJTLESJWFT
t %JHJUBMDBNFSBT
Electrical Specifications by Item
Ampere
Rating
(A)
0.125
0.200
0.250
0.375
0.500
0.750
1.00
1.25
1.50
1.75
2.00
2.50
3.00
4.00
5.00
Amp
Code
.125
.200
.250
.375
.500
.750
001.
1.25
01.5
1.75
002.
02.5
003.
004.
005.
Max
Nominal Cold
Interrupting
Voltage Rating
Resistance
Rating
(V)
(Ohms)
125
4.000
125
1.160
50A @125 V AC/
DC
125
0.710
125
0.350
63
0.248
63
0.111
63
0.076
50A @63 V AC/DC
63
0.059
63
0.048
63
0.039
63
0.031
32
0.024
32
0.020
50A @32 V AC/DC
32
0.014
32
0.011
Nominal
Melting
I2t (A2sec)
0.00040
0.00055
0.0010
0.0028
0.0060
0.0276
0.0423
0.0640
0.1103
0.1323
0.2326
0.3516
0.5760
1.024
1.600
Nom
Nom Power Agency Approvals
Voltage Drop Dissipation
(mV)
(W)
552.66
0.0691
x
x
254.28
0.0509
x
x
207.01
0.0518
x
x
169.18
0.0634
x
x
158.47
0.0792
x
x
98.65
0.0740
x
x
89.94
0.0899
x
x
85.71
0.1071
x
x
82.97
0.1244
x
x
80.73
0.1413
x
x
78.73
0.1575
x
x
76.99
0.1925
x
x
75.99
0.2280
x
x
74.50
0.2980
x
x
73.75
0.3688
x
x
1. Measured at 10% of rated current, 25ºC.
2. Measured at rated voltage.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/466.html for current information.
29
Revised: Jan 12, 2009
466 Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
Thin Film > 1206 Size > Very Fast-ActingTransientology
> 466 Series
1 1/4A
1 1/2A
1 3/4A
2A
2 1/2A
3A
4A
5A
3/4A
1A
3/8A
1/2A
Average Time Current Curves
1/8A
1/4A
Temperature Rerating Curve
100
TIME IN SECONDS
10
1
0.1
Note:
0.01
1. Derating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
Example:
For continuous operation at 70 degrees celsius, the fuse should be deratedas follows:
0.001
I = (0.75)(0.80)IRAT = (0.60)IRAT
0.1
1
10
CURRENT IN AMPERES
100
Soldering Parameters
Pre Heat
Pb – Free assembly
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 180 secs
Average ramp up rate (Liquidus Temp
(TL) to peak
5°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
Peak Temperature (TP)
250+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
260°C
Wave Soldering
tP
TP
Critical Zone
TL to TP
Ramp-up
TL
TS(max)
Temperature
Reflow Condition
tL
Ramp-down
TS(min)
Preheat
tS
25
time to peak temperature
(t 25ºC to peak)
Time
260°C, 10 seconds max.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
466 Series
30
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/466.html for current information.
Surface Mount Fuses
Thin Film > 1206 Size > Very Fast-Acting > 466 Series
Product Characteristics
Operating
Temperature
– 55 C to 90 C.
Consult temperature rerating curve chart.
Thermal Shock
Withstands 5 cycles of –55OC to 125OC
Humidity
MIL-STD-202F, Method 103B, Condition D
O
O
Vibration
Per MIL-STD-202F, Method 201A
Insulation Resistance
(After Opening)
Greater than 10,000 ohms
Resistance to
Soldering Heat
MIL-STD-202G, Method 210F,
Condition D
Part Marking System
Dimensions
MARKING CODE VARIES
WITH AMPERAGE RATING
(SEE CHART)
.66
(.026")
Sn
.56
(.022")
3.18
(.125")
Cu
.58
(.023")
Coating
Sn
Sn
1.52
(.060")
3.18
(.125")
1.65
(.065")
1.52
(.060")
4.83
(.190")
2.03
(.080")
WAVE SOLDER
3.81
(.150")
1.52
(.060")
1.14
(.045")
2.03
(.080")
REFLOW SOLDER
Amp
Code
Marking
Code
.125
B
.200
C
.250
D
.375
E
.500
F
.750
G
001.
H
1.25
J
01.5
K
1.75
L
002.
N
02.5
O
003.
P
004.
S
005.
T
466 Series
Materials
Body: Advanced High Temperature Substrate
Terminations: 100% Tin over Nickel over
Copper
Element Cover Coat: Conformal Coating
Part Numbering System
0466002.NRHF
SERIES
AMP Code
Refer to Amp Code column in the
Electrical Specifications table.
The dot is poisitioned before the Packaging Suffix with whole ratings and
within the numbering sequence for
fractional ratings. Example:
.125 amp product is 0466.125 NR HF
(2 amp product shown above).
QUANTITY Code
N = 5000 pcs
PACKAGING Code
R = Tape and Reel
HALOGEN FREE ITEM
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
8mm Tape and Reel
EIA RS-481-2 (IEC 286, part 3)
5000
NR
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/466.html for current information.
31
466 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
32
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Surface Mount Fuses
Thin Film > 1206 Size > Very Fast-Acting > 429 Series
429 Series Fuse
Description
The 429 Series Fast-Acting SMF is a small (1206 size) thinfilm device designed for secondary protection of circuits
used in space constrained applications such as hand-held
portable electronic devices.
Features
Agency Approvals
AGENCY
AGENCY FILE NUMBER
AMPERE RANGE
E10480
7A
LR29862
7A
t For new designs up
to 5A please consult
the 433 or 466 Series
t 3P)4DPNQMJBOUBOE
Lead-Free 7A device
available-add ‘L’ suffix
to part number.
429 Series
This series is Halogen-Free, Lead-Free and meets the
requirements of the RoHS directive.
t )BMPHFO'SFF"
device available-add
‘HF’ suffix to the part
number
Applications
Electrical Characteristics for Series
% of Ampere
Rating
Opening Time at 25OC
100%
4 hours, Minimum
200%
5 sec., Maximum
300%
0.2 sec., Maximum
Secondary protection for space constrained applications
such as:
t $FMMQIPOFT
t %7%QMBZFST
t #BUUFSZQBDLT
t )BSEEJTLESJWFT
t %JHJUBMDBNFSBT
Electrical Specifications by Item
Ampere
Rating
(A)
Amp
Code
Max
Voltage
Rating
(V)
Interrupting
Rating
Nominal Cold
Resistance
(Ohms)
Nominal
Melting
I2t (A2sec)
7.00
007.
24
35 amperes
@ voltage, VAC/VDC
0.00925
3.6000
Agency
Approvals
x
x
1. Measured at 10% of rated current, 25ºC.
2. Measured at rated voltage.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/429.html for current information.
33
Revised: Jan 12, 2009
429 Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
Thin Film > 1206 Size > Very Fast-ActingTransientology
> 429 Series
Average Time Current Curves
7A
Temperature Rerating Curve
100
TIME IN SECONDS
10
1
0.1
Note:
0.01
1. Derating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
Example:
For continuous operation at 70 degrees celsius, the fuse should be deratedas follows:
I = (0.75)(0.80)IRAT = (0.60)IRAT
0.001
0.1
1
10
CURRENT IN AMPERES
100
Soldering Parameters
Pre Heat
Pb – Free assembly
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 180 secs
Average ramp up rate (Liquidus Temp
(TL) to peak
5°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
Peak Temperature (TP)
250+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
260°C
Wave Soldering
tP
TP
Critical Zone
TL to TP
Ramp-up
TL
TS(max)
Temperature
Reflow Condition
tL
Ramp-down
TS(min)
Preheat
tS
25
time to peak temperature
(t 25ºC to peak)
Time
260°C, 10 seconds max.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
429 Series
34
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/429.html for current information.
Surface Mount Fuses
Thin Film > 1206 Size > Very Fast-Acting > 429 Series
Product Characteristics
Operating
Temperature
– 55OC to 90OC.
Consult temperature rerating chart.
For operation above 90°C contact Littelfuse.
Thermal Shock
Withstands 5 cycles of – 55OC to 125OC
Dimensions
Humidity
MIL-STD-202F, Method 103B
Condition D
Vibration
Withstands 10 – 55 Hz per MIL-STD202F, Method 201A and 10-2000 Hz
at 20 G’s per MIL-STD-202F, Method
204D, Condition D.
Insulation Resistance
(After Opening)
Greater than 10,000 ohms
Resistance to
Soldering Heat
MIL-STD-202G, Method 210F,
Condition D
Part Marking System
RECOMMENDED PAD LAYOUTS
3.18
(.125")
3.81
(.150")
Series
Marking
Code
429L
7
1.52
(.060")
1.52
(.060")
1.14
(.045")
2.03
(.080")
REFLOW SOLDER
429 Series
Materials
Body: Epoxy Substrate
Terminations, RoHS Compliant Device (429L):
100% Tin over Nickel over Copper
Element Cover Coat: Conformal Coating
NOTE: Do not use alcohol-based cleaners or
solvents with 429 Series Thin-Film Fuses as it
may damage the coating.
Part Numbering System
1.12
(.044")
REF.
2.49 (.098")
REF.
0429 007. WRM L HF
1.14
(.045")
SERIES
AMP Code
.635
(.025")
Refer to Amp Code Column of
Electrical characteristics table
QUANTITY Code
WRM = 3000 pieces, Tape and Reel
L = Lead-Free device and
RoHS compliant device
Halogen-Free item
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
Tape & Reel – 8mm tape
EIA RS-481-1 (IEC 286, part 3)
3000
WRM
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/429.html for current information.
35
429 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
36
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Surface Mount Fuses
Thin Film > 1206 Size > Slo-Blo® > 468 Series
468 Series Fuse
Description
The 468 Series Time-Lag (Slo-Blo®) SMF is a small (1206
size) thin-film device designed for secondary protection
of circuits used in space constrained applications such as
hand-held portable electronic devices.
Features
Agency Approvals
AGENCY
AGENCY FILE NUMBER
AMPERE RANGE
E10480
500MA - 3A
LR29862
500MA - 3A
t $PNQMJFTXJUI
electronic industry
environmental standards
for lead reduction.
t 1BDLBHFJTWJTVBMMZ
distinct from fastacting version for easy
identification.
t 1SPEVDUJTDPNQBUJCMF
with lead-free solders
and higher temperature
profiles.
t 5PQTJEFNBSLJOHBMMPXT
visual verification of
amperage rating.
468 Series
This series is 100% lead-free and meets the requirements
of the RoHS directive. New Halogen-Free 468 Series
fuses are available–to order use the “HF” suffix. See Part
Numbering section for additional information.
t 5JNFEFMBZGFBUVSF
withstands high inrush
currents and prevents
nuisance openings.
Electrical Characteristics for Series
% of Ampere
Rating
Opening Time at 25OC
100%
4 hours, Minimum
200%
1 sec., Min.; 120 sec., Max.
300%
0.05 sec., Min.; 1.5 sec., Max
800%
0.0015 sec., Min.; .05 sec., Max.
Applications
Secondary protection for space constrained applications:
t $FMMQIPOFT
t %7%QMBZFST
t #BUUFSZQBDLT
t )BSEEJTLESJWFT
t %JHJUBMDBNFSBT
Electrical Specifications by Item
Ampere
Rating
(A)
Amp
Code
Max
Voltage
Rating
(V)
0.50
.500
63
1.00
001.
63
1.50
01.5
63
2.00
002.
63
2.50
02.5
63
3.00
003.
32
Interrupting
Rating
50 amperes @63
VAC/VDC
Agency
Approvals
Nominal
Melting
I2t (A2sec)
Nom
Voltage
Drop
(mV)
Nom
Power
Dissipation
(W)
0.27000
0.0310
156.77
0.0784
x
x
0.08250
0.1270
94.70
0.0947
x
x
Nominal Cold
Resistance
(Ohms)
0.04750
0.2880
82.32
0.1235
x
x
35 amperes @63 VAC
50 amperes @63
VDC
0.03240
0.5060
77.27
0.1545
x
x
0.02240
1.0110
73.92
0.1848
x
x
50 amperes @32
VAC/VDC
0.01950
1.2700
72.95
0.2189
x
x
1. Measured at 10% of rated current, 25ºC.
2. Measured at rated voltage.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/468.html for current information.
37
Revised: Jan 12, 2009
468 Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
®
Thin Film > 1206 Size > Slo-BloTransientology
> 468 Series
2A
2.5A
3A
1A
100
1.5A
Average Time Current Curves
.5A
Temperature Rerating Curve
Time in Seconds
10
1
0.1
Note:
0.01
1. Derating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
Example:
For continuous operation at 70 degrees celsius, the fuse should be deratedas follows:
I = (0.75)(0.80)IRAT = (0.60)IRAT
0.001
0
1
10
100
Current in Amperes
Soldering Parameters
Pre Heat
Pb – Free assembly
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 180 secs
5°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
250
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
260°C
Wave Soldering
TL
TS(max)
tL
Ramp-down
TS(min)
Preheat
tS
25
Peak Temperature (TP)
+0/-5
Critical Zone
TL to TP
Ramp-up
- Temperature Min (Ts(min))
Average ramp up rate (Liquidus Temp
(TL) to peak
Reflow
tP
TP
Temperature
Reflow Condition
time to peak temperature
(t 25ºC to peak)
Time
°C
260°C, 10 seconds max.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
468 Series
38
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/468.html for current information.
Surface Mount Fuses
Thin Film > 1206 Size > Slo-Blo® > 468 Series
Product Characteristics
Materials
Body: Epoxy Substrate
Terminations: 100% Tin
Element Cover Coat: Conformal Coating
Operating
Temperature
–55OC to 90OC. Consult temperature
rerating curve chart. For operation above
90°C please contact Littelfuse
Thermal Shock
Withstands 5 cycles of – 50OC to 125OC
Humidity
MIL-STD-202F, Method 103B, Condition D
Withstands 10-55 Hz per MIL-STD-202F,
Method 201A and
10-2000 Hz at 20 G’s per MIL-STD-202F,
Method 204D, Condition D
Insulation Resistance
(After Opening)
Greater than 10,000 ohms.
Resistance to
Soldering Heat
MIL-STD-202G, Method 210F,
Condition D
Part Marking System
MARKING CODE VARIES
WITH AMPERAGE RATING
(SEE CHART)
.66
(.026")
.58
(.023")
1.27
(.050")
Coating
1.52
(.060")
Amp
Code
Marking
Code
.500
TF
001.
TH
01.5
TK
002.
TN
02.5
TO
003.
TP
468 Series
Dimensions
Vibration
Part Numbering System
3.18
(.125")
0468002.NRHF
1.65
(.065")
1.52
(.060")
SERIES
4.83
(.190")
2.03
(.080")
WAVE SOLDER
3.81
(.150")
1.52
(.060")
1.14
(.045")
AMP Code
The dot is poisitioned before the Packaging Suffix with whole ratings and
within the numbering sequence for
fractional ratings. Refer to Amp Code
column in the Electrical Specifications
table.
2.03
(.080")
INFARED SOLDER
PACKAGING Code
Example:
1.5 amp product is
046801.5NRHF (2 amp
product shown above).
NR = Tape and Reel, 5000 pcs
‘HF’ SUFFIX
HALOGEN FREE ITEM
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
Tape & Reel – 8mm tape
EIA RS-481-1 (IEC 286, part 3)
5000
NR
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/468.html for current information.
39
468 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
40
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Surface Mount Fuses
Thin Film > 0603 Size > Very Fast-Acting > 467 Series
467 Series Fuse
Description
Features
t $PNQBUJCMFXJUIMFBE
free solders and higher
temperature profiles.
Agency Approvals
AGENCY
AGENCY FILE NUMBER
t )JHIQFSGPSNBODF
materials provide
t .PVOUJOHQBEBOE
improved performance
electrical performance is
in elevated ambient
identical to Littelfuse 431
temperature applications.
and 434 Series products.
AMPERE RANGE
E10480
250MA - 5A
LR29862
250MA - 5A
t .BSLFEPOUPQTVSGBDF
with code to allow amp
rating identification
without testing.
Electrical Characteristics for Series
% of Ampere
Rating
Opening Time at 25OC
100%
4 hours, Minimum
200%
5 sec., Maximum
300%
0.2 sec., Maximum
t &MFNFOUDPWFSJOH
material is resistant
to industry standard
cleaning operations.
t -PXQSPmMFGPSIFJHIU
sensitive applications.
467 Series
The 467 Series Fast-Acting SMF is an ultra small (0603
size) thin-film device designed for secondary protection
of circuits used in space constrained applications such
as hand-held portable electronic devices. This series
is 100% lead-free and meets the requirements of the
RoHS directive. New Halogen-Free 467 Series fuses are
available–to order use the “HF” suffix. See Part Numbering
section for additional information..
t "MMPZCBTFEFMFNFOU
construction provides
superior inrush withstand
characteristics (I2t) over
ceramic or glass based
0603 fuse products.
t 'MBUUPQTVSGBDFGPSQJDL
and-place operations.
Applications
Secondary protection for space constrained applications:
t $FMMQIPOFT
t #BUUFSZQBDLT
t %JHJUBMDBNFSBT t )BSEEJTL
drives.
t %7%QMBZFST
Electrical Specifications by Item
Agency Approvals
Nom
Power
Dissipation
(W)
Nominal Cold
Resistance
(Ohms)
Nominal
Melting
I2t (A2sec)
Nom
Voltage
Drop
(mV)
32
0.5450
0.0030
158.56
0.0396
x
32
0.2900
0.0053
128.03
0.0480
x
x
0.1870
0.0087
115.71
0.0579
x
x
0.1170
0.0171
107.33
0.0805
x
x
Ampere
Rating
(A)
Amp
Code
Max
Voltage
Rating
(V)
0.250
.250
0.375
.375
0.500
.500
32
0.750
.750
32
Interrupting
Rating
50A @32V AC/DC
x
1.00
001.
32
0.0710
0.0212
89.10
0.0891
x
x
1.25
1.25
32
0.0530
0.0518
84.32
0.1054
x
x
1.50
01.5
32
0.0410
0.0766
81.14
0.1217
x
x
1.75
1.75
32
0.0320
0.0903
78.75
0.1378
x
x
2.00
002.
32
0.0300
0.1103
78.22
0.1564
x
x
x
35A @32V AC/DC
2.50
02.5
32
0.0220
0.1440
76.10
0.1903
x
3.00
003.
32
0.0180
0.2403
75.04
0.2251
x
x
3.50
03.5
32
0.0150
0.4306
74.25
0.2599
x
x
4.00
004.
32
0.0130
0.5760
73.72
0.2949
x
x
5.00
005.
32
0.0090
0.9000
72.71
0.3635
x
x
1. Measured at 10%
of rated Ryan
current,Way,
25ºC. South
2. Measured
at rated voltage.
Courtesy of Steven Engineering,
Inc.-230
San Francisco,
CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/467.html for current information.
41
Revised: Jan 12, 2009
467 Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
Thin Film > 0603 Size > Very Fast-ActingTransientology
> 467 Series
1.75 A
2.00 A
2.50 A
3.00 A
3.50 A
4.00 A
5.00 A
0.750 A
1.00 A
1.25 A
1.50 A
0.375 A
0.500 A
Average Time Current Curves
0.250 A
Temperature Rerating Curve
100
TIME IN SECONDS
10
1
0.1
Note:
0.01
1. Derating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
Example:
For continuous operation at 70 degrees celsius, the fuse should be deratedas follows:
0.001
0.1
I = (0.75)(0.80)IRAT = (0.60)IRAT
1
10
CURRENT IN AMPERES
100
Soldering Parameters
Pre Heat
Pb – Free assembly
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 180 secs
Average ramp up rate (Liquidus Temp
(TL) to peak
5°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
Peak Temperature (TP)
250+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
260°C
Wave Soldering
tP
TP
Critical Zone
TL to TP
Ramp-up
TL
TS(max)
Temperature
Reflow Condition
tL
Ramp-down
TS(min)
Preheat
tS
25
time to peak temperature
(t 25ºC to peak)
Time
260°C, 10 seconds max.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
467 Series
42
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/467.html for current information.
Surface Mount Fuses
Thin Film > 0603 Size > Very Fast-Acting > 467 Series
Product Characteristics
Materials
Body: Advanced High Temperature Substrate
Terminations: 100% Tin over Nickel over Copper
Element Cover Coat: Conformal Coating
Operating
Temperature
– 55OC to 90OC. Consult temperature rerating
curve chart. For operation above 90°C contact
Littelfuse.
Humidity
MIL-STD-202F, Method 103B, Condition D
Withstands 5 cycles of – 55OC to 125OC
Vibration
Per MIL-STD-202F
Insulation Resistance
(After Opening)
Greater than 10,000 ohms.
Resistance to
Soldering Heat
MIL-STD-202G, Method 210F,
Condition D
Part Marking System
1.60
(.063")
.127
(.005")
.305
(.012")
Sn
Coating
.279
(.011")
MARKING CODE VARIES
WITH AMPERAGE RATING
(SEE CHART)
Sn
Cu
.18
R (.007")
.813
(.032")
REF.
Sn
1.09
(.043")
1.02
(.040")
3.20
(.126")
1.09
(.043")
WAVE SOLDER
2.54
(.100")
1.02
(.040")
.762
(.030")
1.09
(.043")
REFLOW SOLDER
Amp
Code
Marking
Code
.250
D
.375
E
.500
F
.750
G
001.
H
1.25
J
01.5
K
1.75
L
002.
N
02.5
O
003.
P
03.5
R
004.
S
005.
T
467 Series
Dimensions
Thermal Shock
Part Numbering System
0467002.NRHF
SERIES
AMP Code
The dot is poisitioned before the Packaging Suffix with whole ratings and
within the numbering sequence for
fractional ratings. Refer to Amp Code
column in the Electrical Specifications
table.
PACKAGING Code
Example:
1.5 amp product is
04671.5NRHF (2 amp
product shown above).
NR = Tape and Reel, 5000 pcs
‘HF’ SUFFIX
HALOGEN FREE ITEM
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
8mm Tape and Reel
EIA RS-481-2 (IEC 286, part 3)
5000
NR
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/467.html for current information.
43
467 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
44
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Surface Mount Fuses
Thin Film > 0402 Size > Very Fast-Acting > 435 Series
435 Series Fuse
Description
The 435 Series are fast-acting surface mount thin-film
fuses. Their ultra-small size (0402 size) makes them ideal for
secondary protection of circuits used in space constrained
applications such as hand-held portable electronic devices.
Features
t "JOUFSSVQUSBUJOHBU
32VDC
Agency Approvals
AGENCY
AGENCY FILE NUMBER
AMPERE RANGE
E10480
0.250 - 5.0A
029862_0_000
0.250 - 5.0A
t 4NBMMTJ[FXJUIDVSSFOU
ratings of 0.25 to 5.0
amperes
t 3P)4DPNQMJBOUMFBE
free and halogen-free
Electrical Characteristics for Series
% of Ampere
Rating
Opening Time at 25OC
t .BYJNVNQSPUFDUJPO
of sensitive circuits
as fuses are designed
to open consistently
in <5sec at 200%
overload.
435 Series
This series is 100% lead-free and meet the requirements of
the RoHS directive. New Halogen-Free 435 Series fuses are
available–to order use the “HF” suffix. See Part Numbering
section for additional information.
t &OIBODFE#SFBLJOH
Capacity, High l2t
Applications
Secondary protection for space constrained applications
such as:
100%
4 hours, Minimum
t $FMMQIPOFT
t %7%QMBZFST
200%
5 sec., Maximum
t #BUUFSZQBDLT
t )BSEEJTLESJWFT
300%
0.2 sec., Maximum
t %JHJUBMDBNFSBT
Electrical Specifications by Item
Agency Approvals
Nom
Power
Dissipation
(W)
Nominal Cold
Resistance
(Ohms)
Nominal
Melting
I2t (A2sec)
Nom
Voltage
Drop
(mV)
32
0.400
0.0025
110.53
0.027635
x
x
32
0.1930
0.0035
84.64
0.03174
x
x
32
0.1600
0.0053
93.35
0.04668
x
x
0.1050
0.0120
101.84
0.07638
x
x
0.0730
0.0200
87.45
0.08745
x
x
0.0600
0.0350
96.37
0.12046
x
x
0.0470
0.0560
86.70
0.13005
x
x
0.0390
0.0750
81.13
0.14198
x
x
32
0.0300
0.1000
70.62
55.25
60.58
57.84
57.00
52.44
0.14120
0.13813
0.18740
0.20244
0.22800
0.26220
x
x
x
x
x
x
x
x
x
x
x
x
Ampere
Rating
(A)
Amp
Code
Max
Voltage
Rating
(V)
0.250
.250
0.375
.375
0.500
.500
0.750
.750
32
1.00
001.
32
1.25
1.25
32
1.50
01.5
32
1.75
1.75
32
2.00
002.
Interrupting
Rating
35A @32V DC
2.50
02.5
32
0.0185
0.1560
3.00
003.
32
0.0165
0.2032
3.50
03.5
32
0.0135
0.3017
4.00
004.
32
0.0115
0.3084
5.00
005.
32
0.0085
0.5310
1. Measured at 10% of rated current, 25ºC.
2. Measured at rated voltage.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/435.html for current information.
45
Revised: Jan 12, 2009
435 Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
Thin Film > 0402 Size > Very Fast-ActingTransientology
> 435 Series
.375A
.5A
.75A
1A
1.25A
1.5A
1.75A
2A
2.5A
3A
3.5A
4A
5A
Average Time Current Curves
.25A
Temperature Rerating Curve
100
TIME IN SECONDS
10
1
0.1
Note:
0.01
1. Derating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
Example:
For continuous operation at 70 degrees celsius, the fuse should be deratedas follows:
0.001
0.1
I = (0.75)(0.80)IRAT = (0.60)IRAT
1
10
CURRENT IN AMPERES
100
Soldering Parameters
Pre Heat
Pb – Free assembly
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 120 secs
Average ramp up rate (Liquidus Temp
(TL) to peak
5°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
Peak Temperature (TP)
250+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
260°C
Wave Soldering
tP
TP
Critical Zone
TL to TP
Ramp-up
TL
TS(max)
Temperature
Reflow Condition
tL
Ramp-down
TS(min)
Preheat
tS
25
time to peak temperature
(t 25ºC to peak)
Time
260°C, 10 seconds max.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
435 Series
46
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/435.html for current information.
Surface Mount Fuses
Thin Film > 0402 Size > Very Fast-Acting > 435 Series
Product Characteristics
Materials
Body: Epoxy / Glass Substrate;
Parts with ‘HF’ suffix: Halogen Free Epoxy / Glass
Terminations: 100% Tin over Nickel over Copper
Device Weight: 0.316mg
Terminal
Strength
MIL-STD-202F, Method 211A, Test Condition A
Insulation
Resistance
After Opening: Greater than 10,000Ohms
Operating
Temperature
–55°C to 90°C.
Consult temperature rerating curve chart.
For operation above 90°C please contact
Littelfuse.
Thermal Shock
Withstands 5 cycles of –55°C to 125°C
Vibration
MIL-STD-202F
Marking code varies
with amperage.
Refer to Part Marking
System chart.
A
.991 +/- .051
(.039" +/- .002")
+/- .051
B .508
(.020" +/- .002")
Amp
Code
Marking
Code
.250
.375
.500
.750
.229 +/- .102
(.009" +/- .004")
+/- .076
C .305
(.012" +/- .003")
Sn
Cu
01.5
D .2159 +/- .0889
(.0085" +/- .0035")
001.
1.25
435 Series
Part Marking System
Dimensions
Reflow solder
recommended
mounting pad
dimensions
1.75
II
002.
T
02.5
003.
.584
(.023")
=
03.5
.381
1.55
(.015") (.061")
004.
=
I
005.
.558
(.022")
Part Numbering System
0435 002. K R HF
A
B
C
D
inch min
0.037
0.018
0.009
0.005
inch max
0.041
0.022
0.015
0.012
mm min
0.94
0.457
0.229
0.127
mm max
1.04
0.559
0.381
0.305
SERIES
AMP Code
Refer to Amp Code column in the
Electrical Specifications table.
The dot is positioned at the end of the
number sequence with whole ratings
and within for fractional ratings.
Example: 1.5 amp product is
043501.5KRHF (2 amp product shown)
QUANTITY Code
K = 10,000 Pieces
PACKAGING Code
R = Tape and Reel
HALOGEN FREE ITEM
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
8mm Tape and Reel
EIA RS-481-2 (IEC 286, part 3)
10000
KR
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/435.html for current information.
47
435 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
48
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Surface Mount Fuses
NANO2® > Very Fast-Acting > 448 Series
448 Series Fuse
PS
E
Description
The lead-free Nano2 SMF Fuse is a very small, square
surface mount fuse that is RoHS compliant and 100% leadfree. This product is fully compatible with lead-free solder
alloys and higher temperature profiles associated with
lead-free assembly.
t -FBEGSFF
t 7FSZGBTUBDUJOH
t 4NBMMTJ[F
Agency Approvals
AGENCY
PS
E
AGENCY FILE NUMBER
AMPERE RANGE
E10480
62mA - 15A
LR29862
62mA - 15A
NBK030205
1A - 10A
t 8JEFSBOHFPGDVSSFOU
rating available (62mA
to 15A)
Ampere Rating
Opening Time
100%
1/16 –15
4 hours, Minimum
1/16 –10
5 sec., Maximum
12 –15
20 sec., Maximum
200%
t -PXUFNQFSBUVSF
de-rating
Applications
Electrical Characteristics for Series
% of Ampere
Rating
t 8JEFPQFSBUJOH
temperature range
448 Series
Features
t /PUFCPPL1$
t 5FMFDPNTZTUFN
t -$%1%157
t 8JSFMFTTCBTFTUBUJPO
t -$%NPOJUPS
t 8IJUFHPPET
t -$%1%1QBOFM
t (BNFDPOTPMF
t -$%CBDLMJHIUJOWFSUFS
t 0GmDF"VUPNBUJPO
equipment
t 1PSUBCMF%7%QMBZFS
t 1PXFSTVQQMZ
t /FUXPSLJOH
t 1$TFSWFS
t $PPMJOHGBOTZTUFN
t 4UPSBHFTZTUFN
t #BUUFSZDIBSHJOHDJSDVJU
protection
t *OEVTUSJBMFRVJQNFOU
t .FEJDBMFRVJQNFOU
t"VUPNPUJWF
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/448.html for current information.
49
Revised: Jan 12, 2009
448 Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
NANO2® > Very Fast-ActingTransientology
> 448 Series
Electrical Specifications by Item
Ampere
Rating
(A)
Amp Code
0.062
.062
Max
Voltage
Rating
(V)
125
0.080
.080
125
Interrupting
Rating
Agency Approvals
Nominal Cold
Resistance
(Ohms)
Nominal
Melting
I2t (A2sec)
5.50
0.00023
x
x
4.42
0.00043
x
x
x
PS
E
0.100
.100
125
2.90
0.00082
x
0.125
.125
125
2.58
0.00130
x
x
0.160
.160
125
1.76
0.00280
x
x
0.200
.200
125
1.40
0.00380
x
x
0.250
.250
125
1.05
0.01520
x
x
0.315
.315
125
0.7900
0.02650
x
x
0.375
.375
125
0.7300
0.02400
x
x
0.400
.400
125
0.4895
0.04160
x
x
0.500
.500
125
0.3800
0.10000
x
x
0.630
.630
125
0.2821
0.121
x
x
0.750
.750
125
0.2475
0.206
x
x
0.800
.800
125
1.00
001.
125
1.25
1.25
125
1.50
01.5
125
1.60
01.6
2.00
2.50
50 amperes
@125 VAC/VDC
0.1907
0.272
x
x
0.08630
0.441
x
x
0.06619
0.900
x
x
x
0.06514
0.900
x
x
x
125
0.06261
1.122
x
x
x
002.
125
0.03529
0.812
x
x
x
02.5
125
0.02934
1.156
x
x
x
3.00
003.
125
0.02445
1.720
x
x
x
3.15
3.15
125
0.02300
1.810
x
x
x
3.50
03.5
125
0.02100
2.300
x
x
x
4.00
004.
125
0.01577
3.970
x
x
x
5.00
005.
125
0.01531
4.490
x
x
x
6.30
06.3
125
0.01044
12.10
x
x
x
7.00
007.
125
0.00900
13.92
x
x
x
8.00
008.
125
0.00780
18.33
x
x
x
0.00700
28.00
x
x
x
0.00533
47.59
x
x
0.00394
96.10
x
x
300 amperes
@32 VDC
PSE: 100 amperes
@100VAC
x
35 amperes
@125 VAC
10.00
010.
125
50 amperes
@125 VDC
300 amperes
@32 VDC
PSE: 100 amperes
@100VAC
12.00
012.
65
15.00
015.
65
50 amperes
@65 VAC/VDC
300 amperes
@24 VDC
Notes:
- l2t calculated at 8ms.
- Resistance is measured at 10% of rated current, 25ºC
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
448 Series
50
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/448.html for current information.
Surface Mount Fuses
NANO2® > Very Fast-Acting > 448 Series
Average Time Current Curves
.062 A
.080 A
.100 A
.125 A
.160 A
.200 A
.250 A
.315 A
.375 A
.40 A
.50 A
.63 A
.75 A
.80 A
1.00 A
1.25 A
1.50 A
1.60 A
2.00 A
2.50 A
3.00 A
3.15 A
3.50 A
4.00 A
5.00 A
6.30 A
7A
8A
10 A
12 A
15 A
Temperature Rerating Curve
100
448 Series
TIME IN SECONDS
10
1
0.1
Note:
1. Derating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
0.01
0.001
0.1
1
10
100
1000
CURRENT IN AMPS
Soldering Parameters
Pre Heat
Pb – Free assembly
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 120 secs
5°C/second max.
TS(max) to TL - Ramp-up Rate
5°C/second max.
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 90 seconds
TL
TS(max)
tL
Ramp-down
TS(min)
Preheat
tS
25
Peak Temperature (TP)
250
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max.
Time 25°C to peak Temperature (TP)
8 minutes max.
Do not exceed
260°C
Wave Soldering Parameters
260°C Peak
Temperature, 10
seconds max.
+0/-5
Critical Zone
TL to TP
Ramp-up
- Temperature Min (Ts(min))
Average ramp up rate (Liquidus Temp
(TL) to peak
Reflow
tP
TP
Temperature
Reflow Condition
time to peak temperature
(t 25ºC to peak)
Time
°C
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/448.html for current information.
51
448 Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
NANO2® > Very Fast-ActingTransientology
> 448 Series
Product Characteristics
Materials
Body: Ceramic
Terminations: Gold-plated Caps
Product Marking
Brand, Amperage Rating
Operating
Temperature
Moisture Sensitivity
Level
Thermal Shock
Mechanical Shock
-55oC to 125oC
Level 1, J-STD-020C
Vibration
Solderability
MIL-STD-202, Method 208
Insulation
Resistance (after
Opening)
MIL-STD-202, Method 302, Test Condition
A (10,000 ohms minimum)
Moisture Resistance
Salt Spray
Resistance to Soldering
Heat
Dimensions
6.10
(.240")
F
7A
MIL-STD-202, Method 107, Test
Condition B, 5 cycles, -65oC to
125oC, 15 minutes @ each extreme
MIL-STD-202, Method 213, Test I:
Deenergized. 100G’s pk amplitude,
sawtooth wave 6ms duration, 3
cycles XYZ+xyz = 18 shocks
MIL-STD-202, Method 201: 0.03”
amplitude, 10-55 Hz in 1 min. 2hrs
each XYZ=6hrs
MIL-STD-202, Method 106, 10 cycles
MIL-STD-202, Method 101, Test
Condition B (48hrs)
MIL-STD-202, Method 210, Test
condition B (10 sec at 260oC)
Part Numbering System
2.69
(.106")
0448 001. M R
2.69
(.106")
SERIES
AMP Code*
Refer to Electrical
Characteristics table
1.45
(.057")
6.86
(.270")
QUANTITY Code
3.15
(.124")
PACKAGING Code
M = 1000 pcs
R = Tape and Reel
*Example:
1.5 amp product is 044801.5MR
(1 amp product shown above).
2.95
1.96 (.116")
(.077")
Recommended pad layout
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
12mm Tape and Reel
EIA RS-481-1 (IEC 286, part 3)
1000
MR
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
448 Series
52
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/448.html for current information.
Surface Mount Fuses
NANO2® > Slo-Blo® > 449 Series
449 Series Fuse
PS
E
Description
Features
t 8JEFPQFSBUJOH
temperature range
t -FBEGSFF
Agency Approvals
AGENCY
t 4MP#MP
AGENCY FILE NUMBER
AMPERE RANGE
E10480
375mA - 5A
NBK030205
1A - 5A
PS
E
®
t 4NBMMTJ[F
t 8JEFSBOHFPGDVSSFOU
ratings available
t -PXUFNQFSBUVSF
de-rating
449 Series
The lead free NANO2 Slo-Blo® fuse is RoHS compliant
and 100% lead-free. This product is fully compatible with
lead-free solder alloys and higher temperature profiles
associated with lead-free assembly. The Slo-Blo® design
has enhanced inrush withstand characteristics over the
NANO2 Fast-Acting Fuse. The unique time delay feature
of this fuse design helps solve the problem of nuisance
“opening” by accommodating inrush currents that normally
cause a fast-acting fuse to open.
Applications
Secondary protection for space constrained applications:
t /PUFCPPL1$
t 5FMFDPNTZTUFN
Electrical Characteristics for Series
t -$%1%157
t 8JSFMFTTCBTFTUBUJPO
t -$%NPOJUPS
t 8IJUFHPPET
t -$%1%1QBOFM
t (BNFDPOTPMF
t -$%CBDLMJHIUJOWFSUFS
t 0GmDF"VUPNBUJPO
equipment
% of Ampere
Rating
Opening Time
100%
4 hours, Minimum
200%
1 sec., Min.; 60 sec., Max.
t 1PXFSTVQQMZ
300%
0.2 sec., Min.; 3 sec., Max
t /FUXPSLJOH
800%
0.02 sec., Min.; 0.1 sec., Max.
t 1PSUBCMF%7%QMBZFS
t #BUUFSZDIBSHJOHDJSDVJU
protection
t *OEVTUSJBMFRVJQNFOU
t 1$TFSWFS
t $PPMJOHGBOTZTUFN
t 4UPSBHFTZTUFN
t .FEJDBMFRVJQNFOU
t"VUPNPUJWF
Electrical Specifications by Item
Ampere
Rating
(A)
Amp Code
Max
Voltage
Rating
(V)
Interrupting
Rating
Nominal Cold
Resistance
(Ohms)
Nominal
Melting
I2t (A2sec)
Agency Approvals
PS
E
0.375
0.375
125
1.5130
0.088
x
0.500
0.500
125
0.7633
0.258
x
0.750
0.750
125
0.4080
0.847
x
1.00
001.
125
0.2516
1.76
x
x
1.50
01.5
125
50 amperes @125 VAC/
VDC
0.1186
4.70
x
x
2.00
002.
125
0.0708
6.76
x
x
2.50
02.5
125
PSE: 100 amperes
@100 VAC
0.0400
13.18
x
x
3.00
003.
125
0.0352
19.55
x
x
3.50
03.5
125
0.0261
32.70
x
x
4.00
004.
125
0.0227
40.80
x
x
5.00
005.
125
0.0171
59.59
x
x
Notes: - l2t calculated at 8ms. Resistance is measured at 10% of rated current, 25ºC
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/449.html for current information.
53
Revised: Jan 12, 2009
449 Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
NANO2® > Slo-Blo®Transientology
> 449 Series
.750A
1A
1.5A
2A
2.5A
3A
3.5A
4A
5A
Average Time Current Curves
.375A
.500A
Temperature Rerating Curve
1000
TIME IN SECONDS
100
10
1
Note:
1. Derating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
0.1
0.01
0
1
10
100
CURRENT IN AMPERES
Soldering Parameters
Pre Heat
Pb – Free assembly
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 120 secs
3°C/second max.
TS(max) to TL - Ramp-up Rate
3°C/second max.
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 90 seconds
TL
TS(max)
tL
Ramp-down
TS(min)
Preheat
tS
25
Peak Temperature (TP)
250
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max.
Time 25°C to peak Temperature (TP)
8 minutes max.
Do not exceed
260°C
Wave Soldering Parameters
260°C Peak
Temperature,
3 seconds max.
+0/-5
Critical Zone
TL to TP
Ramp-up
- Temperature Min (Ts(min))
Average ramp up rate (Liquidus Temp
(TL) to peak
Reflow
tP
TP
Temperature
Reflow Condition
time to peak temperature
(t 25ºC to peak)
Time
°C
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
449 Series
54
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/449.html for current information.
Surface Mount Fuses
NANO2® > Slo-Blo® > 449 Series
Product Characteristics
Body: Ceramic
Terminations: Gold-plated Caps
Product Marking
Brand, Amperage Rating
Operating
Temperature
Moisture
Sensitivity Level
MIL-STD-202, Method 107, Test
Condition B, 5 cycles, -65°C to
125°C, 15 minutes @ each extreme
MIL-STD-202, Method 213, Test I:
Deenergized. 100G’s pk amplitude,
sawtooth wave 6ms duration, 3
cycles XYZ+xyz = 18 shocks
MIL-STD-202, Method 201: 0.03"
amplitude, 10-55 Hz in 1 min. 2hrs
each XYZ=6hrs
Thermal Shock
Mechanical Shock
-55°C to 125°C
Level 1, J-STD-020C
Vibration
Solderability
MIL-STD-202, Method 208
Insulation
Resistance (after
Opening)
MIL-STD-202, Method 302, Test Condition
A (10,000 ohms minimum)
Moisture Resistance
MIL-STD-202, Method 106, 10 cycles
Salt Spray
Resistance to Soldering
Heat
Dimensions
Part Numbering System
6.86
(.270")
6.10
(.240")
3.15
(.124")
F
2.95
1.96 (.116")
(.077")
Recommended pad layout
MIL-STD-202, Method 101, Test
Condition B (48hrs)
MIL-STD-202, Method 210, Test
condition B (10 sec at 260°C)
0449 001. M R
SERIES
T
1A
1.45
(.057")
449 Series
Materials
AMP Code*
Refer to Electrical characteristics table
2.69
(.106")
QUANTITY Code
M = 1000 pcs
2.69
(.106")
PACKAGING Code
R = Tape and Reel
*Example:
0.375 Amp product is 0449.375MR
(1 amp product shown above).
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
12mm Tape and Reel
EIA RS-481-2 (IEC 286, part 3)
1000
MR
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/449.html for current information.
55
449 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
56
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Surface Mount Fuses
NANO2® > Very Fast-Acting > 451/453 Series
451/453 Series Fuse
PS
E
Description
Features
t 7FSZGBTUBDUJOH
t 4NBMMTJ[F
t 8JEFSBOHFPGDVSSFOU
rating available (62mA
to 15A)
Agency Approvals
AGENCY
AGENCY FILE NUMBER
AMPERE RANGE
E10480
6.3A - 15A
LR29862
62mA - 15A
NBK030205-E10480B
NBK101105-E184655
1A - 5A
6.3A - 10A
E10480
62mA - 5A
PS
E
t 3P)4DPNQMJBOU
t )BMPHFO'SFF
t 8JEFPQFSBUJOH
temperature range
Applications
Electrical Characteristics for Series
t /PUFCPPL1$
t 5FMFDPNTZTUFN
t -$%1%157
t 8JSFMFTTCBTFTUBUJPO
t -$%NPOJUPS
t 8IJUFHPPET
t -$%1%1QBOFM
t (BNFDPOTPMF
t -$%CBDLMJHIUJOWFSUFS
t 0GmDF"VUPNBUJPO
equipment
t 1PSUBCMF%7%QMBZFS
% of Ampere
Rating
Ampere Rating
Opening Time
t 1PXFSTVQQMZ
100%
1/16 –15
4 hours, Minimum
t /FUXPSLJOH
1/16 –10
5 sec., Maximum
t 1$TFSWFS
12 –15
20 sec., Maximum
t $PPMJOHGBOTZTUFN
200%
t -PXUFNQFSBUVSF
de-rating
451/453 Series
The Nano2 SMF Fuse is a very small, Wire-in-Air (WIA)
square shape surface mount fuse which is very suitable
for the secondary side circuit over-current protection
applications and is designed for PCB using surface mount
technology.
t 4UPSBHFTZTUFN
t #BUUFSZDIBSHJOHDJSDVJU
protection
t *OEVTUSJBMFRVJQNFOU
t .FEJDBMFRVJQNFOU
t "VUPNPUJWF
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/451.html
or /453.html for current information.
57
Revised: June 1, 2009
451/453 Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
Transientology
NANO2® > Very Fast-Acting > 451/453
Series
Electrical Specifications by Item
Ampere
Rating
(A)
Amp
Code
0.062
0.080
0.100
0.125
0.160
0.200
0.250
0.315
0.375
0.400
0.500
0.630
0.750
0.800
1.00
1.25
1.50
1.60
2.00
2.50
3.00
3.15
3.50
4.00
5.00
6.30
7.00
8.00
.062
.080
.100
.125
.160
.200
.250
.315
.375
.400
.500
.630
.750
.800
001.
1.25
01.5
01.6
002.
02.5
003.
3.15
03.5
004.
005.
06.3
007.
008.
Max
Voltage
Rating
(V)
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
Interrupting
Rating
50 amperes @125VAC/VDC
300 amperes @32VDC
PSE: 100 amperes
@100VAC
Nominal Cold
Resistance
(Ohms)
Nominal
Melting
I2t (A2sec)
5.5000
4.0500
3.1000
1.7000
1.2157
0.8372
0.5765
0.3918
0.6100
0.5600
0.4200
0.3050
0.2450
0.2120
0.1530
0.0780
0.0630
0.0580
0.0367
0.0286
0.0227
0.0215
0.0200
0.0160
0.0125
0.0096
0.0090
0.0077
0.00019
0.00033
0.00138
0.00286
0.0048
0.0089
0.0158
0.0311
0.0425
0.0484
0.0795
0.143
0.185
0.271
0.459
0.664
0.853
1.060
0.530
1.029
1.650
1.920
2.469
3.152
5.566
9.170
10.32
20.23
0.0056
Agency Approvals
PS
E
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
26.46
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
35 amperes @125 VAC/
50 amperes @125 VDC
10.0
010.
125
300 amperes @32 VDC
PSE: 100 amperes
@100VAC
12.0
012.
65
50 amperes @65 VAC/VDC
0.0049
47.97
x
x
15.0
015.
65
300 amperes @24 VDC
0.0037
97.82
x
x
Notes:
- l2t calculated at 8ms.
- Resistance is measured at 10% of rated current, 25ºC
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
451/453 Series
58
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/451.html
or /453.html for current information.
Surface Mount Fuses
NANO2® > Very Fast-Acting > 451/453 Series
Average Time Current Curves
.062A
.125A
.160A
.200A
.250A
.315A
.375A
.500A
.750A
1A
1.5A
2A
2.5A
3A
3.5A
4A
5A
7A
8A
10A
12A
15A
Temperature Rerating Curve
100
1
451/453 Series
TIME IN SECONDS
10
0.1
0.01
Note:
1. Derating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
0.001
0.05 0.1
1
10
100
CURRENT IN AMPERES
1000
Soldering Parameters
Pre Heat
Pb – Free assembly
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 120 secs
5°C/second max.
TS(max) to TL - Ramp-up Rate
5°C/second max.
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 90 seconds
TL
TS(max)
tL
Ramp-down
TS(min)
Preheat
tS
25
Peak Temperature (TP)
250
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max.
Time 25°C to peak Temperature (TP)
8 minutes max.
Do not exceed
260°C
Wave Soldering Parameters
260°C Peak
Temperature,
10 seconds max.
+0/-5
Critical Zone
TL to TP
Ramp-up
- Temperature Min (Ts(min))
Average ramp up rate (Liquidus Temp
(TL) to peak
Reflow
tP
TP
Temperature
Reflow Condition
time to peak temperature
(t 25ºC to peak)
Time
°C
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/451.html
or /453.html for current information.
59
451/453 Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
Transientology
NANO2® > Very Fast-Acting > 451/453
Series
Product Characteristics
Body: Ceramic
Terminations: Tin-Lead Alloy
RoHS Compliant Terminations:
Gold-plated Caps (451 series)
Silver-plated Caps (453 series)
Materials
Product Marking
Operating
Temperature
Moisture Sensitivity
Level
Brand, Ampere Rating
Thermal Shock
MIL-STD-202, Method 107, Test
Condition B, 5 cycles, -65°C /
+125°C, 15 minutes @ each extreme
Mechanical Shock
MIL-STD-202, Method 213, Test I:
Deenergized. 100G’s pk amplitude,
sawtooth wave 6ms duration, 3
cycles XYZ+xyz = 18 shocks
Vibration
MIL-STD-202, Method 201: 0.03”
amplitude, 10-55 Hz in 1 min. 2hrs
each XYZ=6hrs
-55°C to 125°C
Level 1, J-STD-020C
Solderability
MIL-STD-202, Method 208
Moisture Resistance
MIL-STD-202, Method 106, 10 cycles
Insulation
Resistance
(after Opening)
MIL-STD-202, Method 302, Test Condition
A (10,000 ohms minimum)
Salt Spray
MIL-STD-202, Method 101, Test
Condition B (48hrs)
Resistance to Soldering
Heat
MIL-STD-202, Method 210, Test
condition B (10 sec at 260°C)
Dimensions
6.10
(.240")
F
7A
Part Numbering System
2.69
(.106")
0451 001. M R L
2.69
(.106")
SERIES
451 = Gold Plated Caps
453 = Silver Plated Caps
1.45
(.057")
AMP Code
Refer to Electrical
characteristics table
6.86
(.270")
QUANTITY Code
M = 1000 pcs
N = 5000 pcs
3.15
(.124")
2.95
1.96 (.116")
(.077")
PACKAGING Code
R = Tape and Reel
RoHS Compliant & Halogen Free
Recommended pad layout
NOTE: “L” suffix applies to 451 series only
451 series may be ordered as either “RoHS and HF” (“L” suffix) or non-RoHS (no
suffix) version.
453 series is available only as RoHS complaint version and does not require “L” suffix.
Please do not include “L” suffix within 453 series ordering instructions.
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
12mm Tape and Reel
EIA RS-481-2 (IEC 286, part 3)
5000
NR
12mm Tape and Reel
EIA RS-481-2 (IEC 286, part 3)
1000
MR
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
451/453 Series
60
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/451.html
or /453.html for current information.
Surface Mount Fuses
NANO2® > Slo-Blo® > 452/454 Series
452/454 Series Fuse
PS
E
Description
The NANO2 Slo-Blo® fuse has enhanced inrush withstand
characteristics over the NANO2 Fast-Acting fuse. The
unique time delay feature of this fuse design helps solve
the problem of nuisance “opening” by accommodating
inrush currents that normally cause a fast-acting fuse to
open.
t 5JNF-BH4MP#MP
t 4NBMMTJ[F
t 8JEFSBOHFPGDVSSFOU
rating available (375mA
to 5A)
t 8JEFPQFSBUJOH
temperature range
Agency Approvals
AGENCY
AGENCY FILE NUMBER
AMPERE RANGE
E10480
375mA - 5A
LR29862
375mA - 5A
NBK030205-E10480B
1A - 5A
452/454 Series
Features
t -PXUFNQFSBUVSF
de-rating
t 3P)4DPNQMJBOU
t )BMPHFO'SFF
Applications
PS
E
t
t
t
t
t
t
t
t
t
t
t
Electrical Characteristics for Series
% of Ampere
Rating
Opening Time
100%
4 hours, Minimum
200%
1 sec., Min.; 60 sec., Max.
300%
0.2 sec., Min.; 3 sec., Max
800%
0.02 sec., Min.; 0.1 sec., Max.
/PUFCPPL1$
-$%1%157
-$%NPOJUPS
-$%1%1QBOFM
-$%CBDLMJHIUJOWFSUFS
1PSUBCMF%7%QMBZFS
1PXFSTVQQMZ
/FUXPSLJOH
1$TFSWFS
$PPMJOHGBOTZTUFN
4UPSBHFTZTUFN
t
t
t
t
t
5FMFDPNTZTUFN
8JSFMFTTCBTFTUBUJPO
8IJUFHPPET
(BNFDPOTPMF
0GmDF"VUPNBUJPO
equipment
#BUUFSZDIBSHJOHDJSDVJU
protection
*OEVTUSJBMFRVJQNFOU
.FEJDBMFRVJQNFOU
"VUPNPUJWF
t
t
t
t
Electrical Specifications by Item
Ampere
Rating
(A)
Amp Code
Max
Voltage
Rating
(V)
0.375
.375
0.500
0.750
Agency Approvals
Nominal Cold
Resistance
(Ohms)
Nominal
Melting
I2t (A2sec)
125
1.2000
0.101
x
x
.500
125
0.7000
0.240
x
x
.750
125
0.3600
0.904
x
x
Interrupting
Rating
PS
E
001.
001.
125
0.2250
1.98
x
x
x
1.50
01.5
125
0.0930
3.65
x
x
x
2.00
002.
125
2.50
02.5
125
3.00
003.
125
0.0340
20.16
x
x
x
3.50
03.5
125
0.0224
26.53
x
x
x
50 amperes @ 125 VAC/VDC
300 amperes @ 32 VDC
PSE: 100 amperes @ 100 VAC
0.0625
8.20
x
x
x
0.0450
15.0
x
x
x
4.00
004.
125
0.0186
34.40
x
x
x
5.00
005.
125
0.0136
53.72
x
x
x
7.00
007.
72
0.0105
123.83
x
x
50 amperes @ 72 VAC
50 amperes @ 60 VDC
Notes:
- l2t calculated at 8ms.
- Resistance is measured at 10% of rated current, 25ºC
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/452.html
or /454.html for current information.
61
Revised: June 1, 2009
452/454 Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
Transientology
NANO2® > Slo-Blo® > 452/454
Series
Temperature Rerating Curve
Average Time Current Curves
7.00A
5.00A
4.00A
3.50A
3.00A
2.50A
2.00A
1.50A
1.00A
750mA
500mA
375mA
100
TIME IN SECONDS
10
1
Note:
1. Derating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
0.1
0.01
0.1
1
10
100
1000
CURRENT IN AMPERES
Soldering Parameters
Pre Heat
Pb – Free assembly
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 120 secs
5°C/second max.
TS(max) to TL - Ramp-up Rate
5°C/second max.
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 90 seconds
TL
TS(max)
tL
Ramp-down
TS(min)
Preheat
tS
25
Peak Temperature (TP)
250
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max.
Time 25°C to peak Temperature (TP)
8 minutes max.
Do not exceed
260°C
Wave Soldering Parameters
260°C Peak
Temperature,
3 seconds max.
+0/-5
Critical Zone
TL to TP
Ramp-up
- Temperature Min (Ts(min))
Average ramp up rate (Liquidus Temp
(TL) to peak
Reflow
tP
TP
Temperature
Reflow Condition
time to peak temperature
(t 25ºC to peak)
Time
°C
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
452/454 Series
62
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/452.html
or /454.html for current information.
Surface Mount Fuses
NANO2® > Slo-Blo® > 452/454 Series
Materials
Body: Ceramic
Terminations: Gold-plated Caps (452) /
Silver-plated Caps (454)
Product Marking
Brand, Ampere Rating
Operating
Temperature
-55°C to 125°C
Moisture
Sensitivity Level
Level 1, J-STD-020C
Solderability
MIL-STD-202, Method 208
Insulation
Resistance (after
Opening)
MIL-STD-202, Method 302, Test Condition
A (10,000 ohms minimum)
Thermal Shock
MIL-STD-202, Method 107, Test
Condition B, 5 cycles, -65°C /
+125°C, 15 minutes @ each extreme
Mechanical Shock
MIL-STD-202, Method 213, Test I:
Deenergized. 100G’s pk amplitude,
sawtooth wave 6ms duration, 3
cycles XYZ+xyz = 18 shocks
Vibration
MIL-STD-202, Method 201: 0.03”
amplitude, 10-55 Hz in 1 min. 2hrs
each XYZ=6hrs
Moisture Resistance
MIL-STD-202, Method 106, 10 cycles
Salt Spray
MIL-STD-202, Method 101, Test
Condition B (48hrs)
Resistance to Soldering
Heat
MIL-STD-202, Method 210, Test
condition B (10 sec at 260°C)
Part Numbering System
Dimensions
0452 001. M R L
6.10
(.240")
SERIES
F
T
1A
1.45
(.057")
452/454 Series
Product Characteristics
AMP Code
Refer to Amp Code column in the
Electrical Specifications table.
The dot is positioned at the end of the
number sequence with whole ratings
and within for fractional ratings.
Example: 0.375 Amp product is
0452.375MRL (1 amp product shown)
2.69
(.106")
2.69
(.106")
QUANTITY Code
M = 1000 pcs
N = 5000 pcs
6.86
(.270")
PACKAGING Code
R = Tape and Reel
3.15
(.124")
RoHS Compliant & Halogen Free
2.95
1.96 (.116")
(.077")
Recommended pad layout
NOTE: “L” suffix applies to 452 series only
452 series may be ordered as either “RoHS and HF” (“L” suffix) or non-RoHS (no
suffix) version.
454 series is available only as RoHS complaint version and does not require “L” suffix.
Please do not include “L” suffix within 452 series ordering instructions.
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
12mm Tape and Reel
EIA RS-481-1 (IEC 286, part 3)
5000
NR
12mm Tape and Reel
EIA RS-481-1 (IEC 286, part 3)
1000
MR
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/452.html
or /454.html for current information.
63
452/454 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
64
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Surface Mount Fuses
NANO2® > 456 Series
456 Series Fuse
PS
E
Description
The High Current NANO2® Fuse is a small square surface
mount fuse that is designed to support higher current
requirements of various applications.
Features
Agency Approvals
AGENCY
PS
E
AGENCY FILE NUMBER
AMPERE RATING
E10480
20A, 30A, 40A
NBK030308-JP1021
20A, 30A
t "WBJMBCMFJOSBUJOHTPG
20 to 40 Amperes
t 'VMMZDPNQBUJCMF
with lead-free solder
alloys and higher
temperature profiles
associated with leadfree assembly
456 Series
t 3P)4DPNQMJBOU
t 4VSGBDFNPVOUIJHI
current fuse
Applications
Electrical Characteristics
t 7PMUBHFSFHVMBUPS
module for PC server
t #BTFTUBUJPOQPXFS
supply
t $PPMJOHGBOTZTUFNGPS
PC server
t "VUPNPUJWF
t 4UPSBHFTZTUFNQPXFS
% of
Ampere Rating
Opening Time
100%
4 hours, Minimum
200%
60 seconds, Maximum
Electrical Specifications
Ampere
Rating
(A)
Amp Code
Max
Voltage
Rating
(V)
20
020.
125
100A @125V AC
300A @ 65V AC
300A @ 100V DC
1000A @ 32V DC
30
030.
125
40
040.
60
Agency Approvals
Nominal
Melting
2
I t (A2 Sec.)
Nom Voltage
Drop
(mV)
0.00230
18
64.7
x
x
100A @ 125V AC
300A @ 65V AC
1000A @ 32V DC
0.00132
81
69.9
x
x
600A @ 60V DC
0.00105
454
55
x
Nominal
Interrupting Rating Cold Resistance
(Ohms)
PS
E
Notes:
1. Cold resistance measured at less than 10% of rated current at 23°C.
2. Agency Approval Table Key: X=Approved or Certified, P=Pending.
3. I2t values stated for 10 msec opening time.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/456.html for current information.
65
Revised: May 14, 2009
456 Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
NANO2®Transientology
> 456 Series
30A
40A
Average Time Current Curves
20A
Temperature Rerating Curve
40
100
20
0
20
40
60
-60°C
-76°F
-40°C
-40°F
-20°C
-4°F
0°C
32°F
20°C
40°C
60°C
80°C
68°F
104°F 140°F 176°F
AMBIENT TEMPERATURE
100°C
212°F
120°C
248°F
10
TIME IN SECONDS
0
PERCENT OF DOWNUPRATING
PERCENT OF UPRATING
60
140°C
264°F
1
0.1
0.01
0.001
1
10
100
1000
CURRENT IN AMPS
Soldering Parameters – Reflow Soldering
Pre Heat
Pb – Free assembly
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 180 secs
Average ramp up rate (Liquidus Temp
(TL) to peak
5°C/second max.
TS(max) to TL - Ramp-up Rate
5°C/second max.
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
Peak Temperature (TP)
250+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max.
Time 25°C to peak Temperature (TP)
8 minutes max.
Do not exceed
260°C
tP
TP
Critical Zone
TL to TP
Ramp-up
TL
TS(max)
Temperature
Reflow Condition
tL
Ramp-down
TS(min)
Preheat
tS
25
time to peak temperature
(t 25ºC to peak)
Time
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
456 Series
66
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/456.html for current information.
Surface Mount Fuses
NANO2® > 456 Series
Materials
Body: Ceramic
Cap: Silver Plated Brass
Product Marking
Body: Brand Logo, Current Rating
Insulation Resistance
MIL-STD-202, method 302, Test
Condition A (10,000 ohms, Minimum)
Solderability
MIL-STD-202, Method 208
Resistance to
Soldering Heat
MIL-STD-202, Method 210,
Test Condition B (10 sec at 260OC)
Min. copper layer thickness = 100μm
Min. copper trace width =20A, 30
10mm (20A, 30A) / 15mm (40A)
PCB
Alternate methods of thermal manageRecommendation for ment may be used. In such cases,
Thermal Management under normal operations, the maximum temperature of the fuse body
should not exceed 80OC in a 25OC
environment.
Dimensions
Operating Temperature
-55OC to 125OC with proper derating
Thermal Shock
MIL-STD-202F, Method 107G,
Test Condition B
(5 cycles -65OC to 125OC)
Vibration
MIL-STD-202F, Method 201A
(10-55 Hz)
Moisture Sensitivity
Level
Level 1 J-STD-020C
Moisture Resistance
MIL-STD-202F Method 106,
High Humidity (90-98%RH),
Heat (65OC)
Salt Spray
MIL-STD-202F, Method 101D,
Test Condition B
Mechanical Shock
MIL-STD-202, Method 213,
Test Condition I (100 G’s peak for 6
milliseconds)
456 Series
Product Characteristics
Part Numbering System
20 A, 30A:
10.10
(.397”)
F 20 A
3.120
(.123”)
0456 020. E R
3.25
(.128”)
3.120
[.123”]
SERIES
6.10
(.240”)
1.70 typ
(.496”)
12.60
(.496”)
AMP Code
Refer to Electrical
characteristics table
3.43
(.135”)
Recommended Pad Layout
40A:
QUANTITY Code
E = 2500 pcs
D = 1500 pcs
4.445
(.175”)
12.50
(.492)
PACKAGING Code
R = Tape and Reel
4.445
(.175”)
F 40 A
2.173
(.086”)
2.79
(.110”)
0.30
(.012”)
3.79
(.149”)
5.72
(.225”)
5.65
(.222”)
Recommended Pad Layout
13.3
(.524”)
Packaging
Rating
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
20A, 30A
24 mm Tape and Reel
EIA RS-481-2
2500
ER
40A
24 mm Tape and Reel
EIA RS-481-2 (IEC 286, part 3)
1500
DR
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/456.html for current information.
67
456 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
68
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Surface Mount Fuses
NANO2® > 458 Series 1206 Size Inrush Withstand Fuse
458 Series Fuse
Description
The 458 Series Nano2® Fuse is an ultra-small, square
surface mount fuse designed to support a variety of space
constrained overcurrent protection applications. Offering a
1206 size footprint, it is the smallest wire-in-air type surface
mount fuse offered by Littelfuse.
t 4VSGBDF.PVOU'VTF
t 3P)4$PNQMJBOU
t 'VMMZDPNQBUJCMFXJUI
lead free soldering
profiles
t )BMPHFO'SFF
Agency Approvals
AGENCY
AGENCY FILE NUMBER
AMPERE RANGE
E10480
1A–10A
Applications
Electrical Characteristics for Series
% of Ampere
Rating
Opening Time
100%
4 hours, Minimum
250%
5 seconds, Maximum
t "WBJMBCMFJOSBUJOHTPG
1 to 10 Amperes
t /PUFCPPL1$
t $BS/BWJHBUJPO4ZTUFN
t-$%CBDLMJHIUJOWFSUFS
t /FUXPSL&RVJQNFOU
t -$%1BOFM t 5FMFDPN&RVJQNFOU
t %$%$DPOWFSUFS
t &MFDUSPOJD4JHOBHF
t #BUUFSZ1BDL
t 1PSUBCMF$POTVNFS
Electronics
458 Series
Features
Electrical Specifications by Item
Agency
Approvals
Ampere
Rating
(A)
Amp
Code
Marking
1.0
001.
1
1.25
1.25
1.25
1.5
01.5
1.5
1.6
01.6
1.6
0.092
.562
x
2
002.
2
0.0695
.952
x
2.5
02.5
2.5
0.06
1.408
x
3
003.
3
0.049
2.289
x
Max
Voltage
Rating (V)
63V
Interrupting
Rating
50A @63Vdc
Nominal Cold
Resistance
(Ohms)
Nominal
Melting
I2t (A2sec)
0.180
.168
x
0.125
.313
x
0.099
.548
x
3.15
3.15
3.15
0.045
2.457
x
3.5
03.5
3.5
0.0375
4.00
x
4
004.
4
0.032
4.832
x
5
005.
5
0.027
7.938
x
6.3
06.3
6.3
0.0192
14.37
x
7
007.
7
0.0175
20.48
x
8
008.
8
0.0058
9.00
x
10.0
010.
10
0.00465
15.0
x
Notes:
1. l2t values stated for 8 msec opening time
2. Cold resistance measured at less than 10% of rated current at 25°C.
3. Agency Approval Table Key: X=Approved or Certified, P=Pending and Blank=Not Approved
4. Have special electrical characteristic needs? Contact Littelfuse to learn more about application specific options.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/458.html for current information.
69
Revised: Mar 17, 2009
458 Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
Transientology
NANO > 458 Series 1206 Size Inrush Withstand
Fuse
2®
Average Time Current Curves
Temperature Rerating Curve
Note:
1. Derating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
Soldering Parameters
Pre Heat
Pb – Free assembly
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 120 secs
5°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 90 seconds
TL
TS(max)
tL
Ramp-down
TS(min)
Preheat
tS
25
Peak Temperature (TP)
250
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
260°C
+0/-5
Critical Zone
TL to TP
Ramp-up
- Temperature Min (Ts(min))
Average ramp up rate (Liquidus Temp
(TL) to peak
Reflow
tP
TP
Temperature
Reflow Condition
time to peak temperature
(t 25ºC to peak)
Time
°C
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
458 Series
70
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/458.html for current information.
Surface Mount Fuses
NANO2® > 458 Series 1206 Size Inrush Withstand Fuse
Materials
Body: Ceramic
Cap: Gold Plated Brass
Operating Temperature
–55OC to 125OC with proper derating
Product Marking
Body: Current Rating
(Refer to Electrical Characteristic table)
Thermal Shock
MIL-STD-202F, Method 107G,
Test Condition B (5 cycles -65oC
to +125oC)
Vibration
MIL-STD-202F, Method 201A
(10-55 Hz)
Moisture Resistance
MIL-STD-202, Method 106,
High Humidity (90-98%RH),
Heat (65oC)
MIL-STD-202F, Method 101D,
Test Condition B
Insulation Resistance MIL-STD-202, Method 302,
Test Condition A (10,000 ohms,
(after Opening)
Minimum)
Solderability
MIL-STD-202, Method 208
Resistance to
Soldering Heat
MIL-STD-202, Method 210,
Test Condition B (10 sec at 260oC)
Salt Spray
Moisture Sensitivity
Level
Level 1
Shock
MIL-STD-202, Method 213,
Test Condition I (100 G’s peak for 6
milliseconds)
Part Numbering System
Dimensions
3.175
(.125”)
458 Series
Product Characteristics
0458 001. D R
1.575
(.062”)
SERIES
1.575
(.062”)
AMP Code
Refer to Electrical
characteristics table
0.813
(.032”)
QUANTITY Code
3.65
(.143”)
D: 1500 pcs
PACKAGING Code
R: Tape and Reel
2.05
(.081”)
1.185
(.047”)
Example:
1.5 amp product is
0458 01.5 D R (1 amp
product shown above).
1.28
(.050”)
Recommended Pad Layout
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
24mm Tape and Reel
EIA-RS 481-1
1500
DR
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/458.html for current information.
71
458 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
72
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Surface Mount Fuses
NANO2® > 250V > Time Lag > 443 Series
443 Series Fuse
Description
The 250V Nano2 Fuse is a small square surface mount
fuse that is designed to enable compliance with the RoHS
directive. This product is fully compatible with lead-free
solder alloy and higher temperature profiles associated
with lead-free assembly.
t 7"$WPMUBHFSBUJOH
t 5JNF-BH
t "WBJMBCMF"o
5.00A
Agency Approvals
t 3P)4$PNQMJBOU
AGENCY
AGENCY FILE NUMBER
AMPERE RANGE
E10480
0.500A - 5.00A
Applications
t "$%$QPXFSBEBQUPS
t 5FMFDPNFRVJQNFOU
system power
Electrical Characteristics for Series
% of Ampere
Rating
t 1PSUBCMFTZTUFNCVJMU
in AC/DC converter
Opening Time
100%
4 hours, Minimum
250%
120 seconds, Maximum
t 'VMMZDPNQBUJCMF
with lead-free solder
alloys and higher
temperature profiles
associated with leadfree assembly
443 Series
Features
t )JHIWPMUBHF%$%$
converter
t -JHIUJOH4ZTUFN
t -&%-JHIUJOH
Electrical Specifications by Item
Ampere
Rating
(A)
Amp Code
Max
Voltage
Rating
(V)
0.50
.500
250
0.75
.750
250
Agency
Approvals
Nominal
Melting
I2t (A2sec)
Nominal
Voltage Drop
(mV)
0.600
1.61
448
x
0.275
1.00
285
x
Nominal Cold
Resistance
(Ohms)
Interrupting
Rating
1
001.
250
0.180
10.17
234
x
1.50
01.5
250
0.100
14.72
196
x
0.052
18.06
154
x
0.035
18.13
139
x
x
2
002.
250
2.50
02.5
250
50A @250VAC
3
003.
250
0.028
51.44
113
3.50
03.5
250
0.019
53.14
98
x
4
004.
250
0.016
70.56
81
x
5
005.
250
0.0115
127.79
80
x
Notes:
1. Cold resistance measured at less than 10% of rated current at 23°C.
2. Agency Approval Table Key: X=Approved or Certified, P=Pending and Blank=Not Approved
3. Have special electrical characteristic needs? Contact Littelfuse to learn more about application specific options.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/443.html for current information.
73
Revised: Mar 17, 2009
443 Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
NANO2® > 250V > Time LagTransientology
> 443 Series
Average Time Current Curves
0.50 A
0.75 A
1.00 A
1.50 A
2.00 A
2.50 A
3.00 A
3.50 A
4.00 A
5.00 A
Temperature Rerating Curve
100
TIME IN SECONDS
10
1
0.1
Note:
1. Derating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
0.01
0.001
0.1
1
10
100
1000
CURRENT IN AMPS
Soldering Parameters
Pre Heat
Pb – Free assembly
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 120 secs
5°C/second max.
TS(max) to TL - Ramp-up Rate
5°C/second max.
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 90 seconds
TL
TS(max)
tL
Ramp-down
TS(min)
Preheat
tS
25
Peak Temperature (TP)
250
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max.
Time 25°C to peak Temperature (TP)
8 minutes max.
Do not exceed
260°C
Wave Soldering Parameters
260°C Peak
Temperature,
3 seconds max.
+0/-5
Critical Zone
TL to TP
Ramp-up
- Temperature Min (Ts(min))
Average ramp up rate (Liquidus Temp
(TL) to peak
Reflow
tP
TP
Temperature
Reflow Condition
time to peak temperature
(t 25ºC to peak)
Time
°C
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
443 Series
74
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/443.html for current information.
Surface Mount Fuses
NANO2® > 250V > Time Lag > 443 Series
Materials
Body: Ceramic
Cap: Silver Plated Brass
Operating Temperature
–55OC to 125OC with proper derating
Thermal Shock
Product Marking
Body: Brand Logo, Current Rating
Rated Voltage, T - C
Characteristic “T”
MIL-STD-202F, Method 107G,
Test Condition B (5 cycles -65oC
to +125oC)
Vibration
MIL-STD-202F, Method 201A
(10-55 Hz)
Moisture Resistance
MIL-STD-202, Method 106,
High Humidity (90-98%RH), Heat
(65oC)
Salt Spray
MIL-STD-202F, Method 101,
Test Condition B
Mechanical Shock
MIL-STD-202, Method 213,
Test Condition I (100 G’s peak for
6 milliseconds)
Insulation Resistance MIL-STD-202, Method 302,
Test Condition A (10,000 ohms,
(after Opening)
Minimum)
Solderability
MIL-STD-202, Method 208
Resistance to
Soldering Heat
MIL-STD-202, Method 210,
Test Condition B (10 sec at 260oC)
Moisture Sensitivity
Level
Level 1 J-STD-020C
Min. copper layer thickness = 100um
Min. copper trace width = 10mm
PCB
Recommendation
for Thermal
Management
Alternate methods of thermal management may be used. In such cases,
under normal operations, the maximum
temperature of the fuse body should
not exceed 80OC in a 25OC ambient
environment.
Part Numbering System
Dimensions
3.25
(.128")
10.10
(.397")
5A T
AC250V
3.12
(.123")
443 Series
Product Characteristics
3.12
(.123")
6.10
(.240")
0443 .500 D R
SERIES
3.43
(.135")
AMP Code
Refer to Electrical
characteristics table
12.6
(.496")
1.70 typ
(.067")
QUANTITY Code
Recommended Pad Layout
D = 1500 pcs
PACKAGING Code
R = Tape and Reel
Example:
1.5 amp product is
0443 01.5 D R (0.5 amp
product shown above).
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
24mm Tape and Reel
EIA-RS 481-2 (IEC 286, part 3)
1500
DR
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/443.html for current information.
75
443 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
76
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Surface Mount Fuses
NANO2® > 250V UMF > Fast-Acting > 464 Series
464 Series Fuse
PS
E
Description
The Surface Mount Nano2 250V UMF product family
complies with IEC Publication IEC60127-4-Universal
Modular Fuse-Links [UMF]. This IEC standard has been
accepted by UL/CSA making it the first global fuse
standard.
Agency Approvals
AGENCY
AGENCY FILE NUMBER
AMPERE RANGE
PS
E
NBK30502-E108480A
1A - 6.3A
E184655A,B
500mA - 6.3A
t 'BTU"DUJOH
t 7"$7PMUBHFSBUJOH
t -JTUFEUP*&$
Universal Modular
Fuse-Links (UMF),
250V
t 3P)4DPNQMBJOU
464 Series
Features
Applications
t 1PXFSTVQQMZ
t *OEVTUSJBMFRVJQNFOU
t -JHIUJOHTZTUFN
t .FEJDBMFRVJQNFOU
t 8IJUFHPPET
Electrical Characteristics for Series
% of Ampere
Rating
Opening Time
125%
1 hour, Minimum
200%
2 minutes, Maximum
1000%
0.001 sec., Min.; 0.01 sec., Max.
Electrical Specifications by Item
Ampere
Rating
(A)
Amp Code
Max
Voltage
Rating
(V)
0.500
.500
250
0.800
.800
1.00
001.
1.25
1.25
Agency Approvals
Nominal Cold
Resistance
(Ohms)
Nominal
Melting
I2t (A2sec)
Nominal
Voltage Drop
(mV)
0.2373
0.22
600
250
0.1159
0.96
400
250
0.0762
0.51
300
x
x
250
0.0580
0.98
300
x
x
Interrupting
Rating
PS
E
x
x
1.60
01.6
250
2.00
002.
250
2.50
02.5
250
0.0288
3.99
300
x
x
3.15
3.15
250
0.0206
8.05
300
x
x
100 amperes
@250VAC
0.0448
1.67
300
x
x
0.0354
2.48
300
x
x
4.00
004.
250
0.0156
13.85
300
x
x
5.00
005.
250
0.0119
23.6
300
x
x
6.30
06.3
250
0.0093
53.33
300
x
x
Notes:
- l2t calculated at 8ms.
- Resistance is measured at 10% of rated current, 25ºC
- For information and availability of additional ratings please contact Littelfuse
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/464.html for current information.
77
Revised: Jan 12, 2009
464 Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
NANO2® > 250V vvUMF > Fast-ActingTransientology
> 464 Series
.80 A
1.00 A
1.25 A
1.60 A
2.00 A
2.50 A
3.15 A
4.00 A
5.00 A
6.30 A
Average Time Current Curves
.50 A
Temperature Rerating Curve
100
TIME IN SECONDS
10
1
0.1
Note:
1. Derating depicted in this curve is in addition to the standard derating of 15% for
continuous operation.
0.01
0.001
0.1
1000
100
10
CURRENT IN AMPERES
1
Soldering Parameters
Pre Heat
Pb – Free assembly
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 120 secs
5°C/second max.
TS(max) to TL - Ramp-up Rate
5°C/second max.
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 90 seconds
TL
TS(max)
tL
Ramp-down
TS(min)
Preheat
tS
25
Peak Temperature (TP)
250
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max.
Time 25°C to peak Temperature (TP)
8 minutes max.
Do not exceed
260°C
Wave Soldering Parameters
260°C Peak
Temperature,
10 seconds max.
+0/-5
Critical Zone
TL to TP
Ramp-up
- Temperature Min (Ts(min))
Average ramp up rate (Liquidus Temp
(TL) to peak
Reflow
tP
TP
Temperature
Reflow Condition
time to peak temperature
(t 25ºC to peak)
Time
°C
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
464 Series
78
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/464.html for current information.
Surface Mount Fuses
NANO2® > 250V UMF > Fast-Acting > 464 Series
Product Characteristics
Materials
Body: Ceramic
Terminations: Silver-plated Caps
Product Marking
Brand, Ampere Rating, Voltage Rating,
UMF Logo
Thermal Shock
MIL-STD-202, Method 107, Test
Condition B, 5 cycles, -65°C /
+125°C
Mechanical Shock
MIL-STD-202, Method 213, Test
Condition A
Vibration
MIL-STD-202, Method 201 (10-55 Hz)
-55°C to 125°C
Moisture Sensitivity
Level
Level 1, J-STD-020C
Moisture Resistance
MIL-STD-202, Method 106, 10 cycles
Solderability
IEC 60127-4
Salt Spray
MIL-STD-202, Method 101, Test
Condition B (48hrs)
Insulation
Resistance (after
Opening)
IEC 60127-4 (0.1Mohm min @ 500VDC)
Resistance to Soldering
Heat
IEC 60127-4
Dimensions
Part Numbering System
12.1
(.475")
F F500mAL
AC250V
4.5
(.177")
464 Series
Operating
Temperature
2.8
(.11")
Recommended pad layout
6.7
(.264")
0464 001. D R
SERIES
5.6
(.22")
AMP Code*
Refer to Electrical
Characteristics table
6.9
(.27")
WAVE SOLDER
3.5
(.14")
TOP VIEW
4.5
(.177")
Height
END CAP
QUANTITY Code
D = 1500 pcs
PACKAGING Code
R = Tape and Reel
5.6
(.22")
6.8
(.264")
REFLOW SOLDER
*Example:
2.5 amp product is 046402.5 DR
(1 amp product shown above).
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
24mm Tape and Reel
EIA RS-481-1 (IEC 286, part 3)
1500
DR
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/464.html for current information.
79
464 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
80
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Surface Mount Fuses
NANO2® > 250V UMF Time Lag > 465 Series
465 Series Fuse
PS
E
Description
The Surface Mount Nano2 250V UMF product family
complies with IEC Publication IEC60127-4-Universal
Modular Fuse-Links [UMF]. This IEC standard has been
accepted by UL/CSA making it the first global fuse
standard.
Agency Approvals
AGENCY
AGENCY FILE NUMBER
AMPERE RANGE
PS
E
NBK030205-E108480B
1A - 6.3A
E184655A,B
250mA - 6.3A
t 5JNF-BH
t 7"$7PMUBHFSBUJOH
t -JTUFEUP*&$
Universal Modular
Fuse-Links (UMF),
250V
t 3P)4DPNQMBJOU
465 Series
Features
Applications
t 1PXFSTVQQMZ
t *OEVTUSJBMFRVJQNFOU
t -JHIUJOHTZTUFN
t .FEJDBMFRVJQNFOU
t 8IJUFHPPET
Electrical Characteristics for Series
% of Ampere
Rating
Opening Time
125%
1 hour, Minimum
200%
2 minutes, Maximum
1000%
0.01 sec., Min.; 0.1 sec., Max.
Electrical Specifications by Item
Ampere
Rating
(A)
Amp Code
Max
Voltage
Rating
(V)
1.00
001.
1.25
1.25
Agency Approvals
Nominal Cold
Resistance
(Ohms)
Nominal Melting
I2t (A2sec)
250
0.1070
2.8
x
x
250
0.0830
5.6
x
x
Interrupting
Rating
PS
E
1.60
01.6
250
0.0560
9.2
x
x
2.00
002.
250
0.0390
14.9
x
x
2.50
02.5
250
3.15
3.15
250
4.00
004.
5.00
005.
6.30
06.3
250
100 amperes
@250VAC
0.0260
21.0
x
x
0.0210
31.7
x
x
250
0.0160
48.4
x
x
250
0.0130
87.0
x
x
0.0088
144.4
x
x
Notes:
- l2t calculated at 8ms.
- Resistance is measured at 10% of rated current, 25ºC
- For information and availability of additional ratings please contact Littelfuse
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/465.html for current information.
81
Revised: Feb 18, 2009
465 Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
NANO2® > 250V UMF Time LagTransientology
> 465 Series
Average Time Current Curves
1A
1.25 A
1.6 A
2A
2.5 A
3.15 A
4A
5A
6.3 A
Temperature Rerating Curve
100
TIME IN SECONDS
10
1
0.1
Note:
1. Derating depicted in this curve is in addition to the standard derating of 15% for
continuous operation.
0.01
0.001
0.1
1000
100
10
CURRENT IN AMPERES
1
Soldering Parameters
Pre Heat
Pb – Free assembly
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 120 secs
5°C/second max.
TS(max) to TL - Ramp-up Rate
5°C/second max.
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 90 seconds
TL
TS(max)
tL
Ramp-down
TS(min)
Preheat
tS
25
Peak Temperature (TP)
250
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max.
Time 25°C to peak Temperature (TP)
8 minutes max.
Do not exceed
260°C
Wave Soldering Parameters
260°C Peak
Temperature,
3 seconds max.
+0/-5
Critical Zone
TL to TP
Ramp-up
- Temperature Min (Ts(min))
Average ramp up rate (Liquidus Temp
(TL) to peak
Reflow
tP
TP
Temperature
Reflow Condition
time to peak temperature
(t 25ºC to peak)
Time
°C
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
465 Series
82
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/465.html for current information.
Surface Mount Fuses
NANO2® > 250V UMF Time Lag > 465 Series
Product Characteristics
Body: High Performance Ceramic
Terminations: Silver plated brass.
Product Marketing
Brand, Ampere Rating, Voltage
Rating, UMF Logo
Thermal Shock
MIL-STD-202, Method 107,
Test Condition B , 5 cycles, –65OC
to 125°C
Mechanical Shock
MIL-STD-202, Method 213, Test
Condition A
Vibration
MIL-STD-202, Method 201 (10-55 Hz)
Moisture Resistance
MIL-STD-202, Method 106, 10 cycles
Salt Spray
MIL-STD-202, Method 101, Test
Condition B (48hrs)
Resistance to Soldering
Heat
IEC 60127-4
Operating Temperature –55OC to 125OC.
Moisture Sensitivity
Level
Level 1, J-STD-020C
Solderability
IEC60127-4
Insulation Resistance
(after opening
IEC 60127-4 (0.1Mohm min @
500VDC)
Shock
MIL-STD-202, Method 213, Test
Condition A
Dimensions
465 Series
Materials
Part Numbering System
0465 .500 D R
SERIES
AMP Code*
Refer to Electrical
Characteristics table
QUANTITY Code
D = 1500 pcs
PACKAGING Code
R = Tape and Reel
*Example:
2.5 amp product is 046502.5DR
(0.5 amp product shown above).
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
24mm Tape and Reel
EIA RS-481-1 (IEC 286, part 3)
1500
DR
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/465.html for current information.
83
465 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
84
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Surface Mount Fuses
Surge Resistant > 461 Series TeleLink® Fuse
461 Series TeleLink® Fuse
The Littelfuse 461 Series TeleLink® surface mount,
surge tolerant fuse, offers over-current protection for a
wide range of telecom applications without requiring
a series resistor. When used in conjunction with a
Littelfuse SIDACtor® Transient Voltage Suppressor (TVS)
or a GreentubeTM gas plasma arrestor, this combination
provides a compliant solution for standards and
recommendations such as GR-1089–Core, TIA-968-A, UL/
EN/IEC 60950, and ITU K.20 and K.21. The coordination
requirement contained in GR-1089–Core, and ITU K.20/21
may require a series impedance device.
Agency Approvals
AGENCY
Features
AGENCY FILE NUMBER
AMPERE RANGE
E10480
500mA - 2A
LR29862
500mA - 2A
t "SBUJOHIBTJNQSPWFE
temperature rise
performance under 2.2A
surge current testing
when compared with
t %FTJHOFEUPBMMPX
1.25A rating.
compliance with Telcordia
GR-1089-CORE and TIA- t 1SPEVDUJT3P)4
Compliant and
968-A (formerly FCC Part
compatible with lead68) Surge Specifications.
free solders and higher
t 1SPWJEFTDPPSEJOBUFE
temperature profiles
protection with Littelfuse
when ordered with
®
SIDACtor Transient
Standard Silver Plated
Voltage Suppressor (TVS)
Brass Caps.
TM
or a Greentube gas
t .FFUT6-SE
Edition power cross
requirements stand
alone.
Electrical Characteristics for Series
% of Ampere
Rating
Opening Time
100%
4 hours, Minimum
250%
1 sec., Min.; 120 sec., Max.
Maximum Temperature Rise
Telecom Nano2 Fuse
Temperature Reading
04611.25
< 82°C (180°F)
0461002.
< 50°C (122°F)
telecommunication and
networking equipment.
t 4VSGBDFNPVOUTVSHF
resistant Slo-Blo® fuse.
461 Series
Description
plasma arrestor, without
series resistors.
t %FTJHOFEUPTFSWF
the requirements
of a wide range of
Higher Currents and PCB layout designs can affect this parameter.
Readings are measured at rated current after temperature stabilizes.
t 4UBOEBSEQSPEVDUJT
RoHS Compliant and
compatible with leadfree solders and higher
temperature profiles.
Applications
t 5&+BOE)%4-
t 4-*$JOUFSGBDFQPSUJPOPG'JCFSUPUIF$VSC'55$
BOE
Fiber to the Premises (FTTP)
t /PO'JCFS4-*$JOUFSGBDFGPS$FOUSBM0GmDF$0
locations and Remote Terminals (RT)
t Y%4-BQQMJDBUJPOTTVDIBT"%4-"%4-7%4-BOE
VDSL2+
t &UIFSOFU#BTF5
t 1054BQQMJDBUJPOTTVDIBTNPEFNTBOTXFSJOH
machines, telephones, fax machines, and security
systems
t *4%/i6wJOUFSGBDF
t #BZTUBUJPO5&+5%4
USVOLDBSET
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/461.html for current information.
85
Revised: Mar 17, 2009
461 Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
®
Transientology
Surge Resistant > 461 Series TeleLink
Fuse
Electrical Specifications by Item
Ampere
Rating
(A)
Amp Code
Max
Voltage
Rating
(V)
0.500
.500
600
1.25
1.25
600
2.00
002.
600
Agency Approvals
Interrupting
Rating
Nominal Cold
Resistance (Ohms)
Nominal Melting
I2t (A2sec)
0.560
0.8401
x
x
0.110
1
16.5
x
x
0.050
17.51
x
x
60 amperes @600
VAC.
I t is calculated at 10 msec or less. I2t at 10 times rated current has a typical value of: 24
A2sec (2.0A), 22 A2sec (1.25A), 1.3 A2sec (0.5A).
1 2
t 5ZQJDBMJOEVDUBODFO)VQUP.)[
t 3FTJTUBODFDIBOHFTGPSFWFSZ¡$
t 3FTJTUBODFJTNFBTVSFEBUSBUFEDVSSFOU
2A
.500A
1.25A
Average Time Current Curves
Temperature Rerating Curve
100
TIME IN SECONDS
10
1
0.1
Operating Temperature is -55° C to +125° with proper correction factor applied.
Ambient temperature effects are in addition to the normal derating.
Note:
0.01
1. Derating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
0.001
0.1
1
10
CURRENT IN AMPERES
100
1000
GR 1089 Inter-building requirements
GR 1089 1st level lighting surge inter-building
(Equipment under test can not be damaged and must
continue to operate properly)
Minimum Minimum Max.
Repetitions
Peak
Peak
Rise/Min.
Surge
Each
Voltage
Current
Decay
Polarity
(V)
(A)
(μs)
1
600
100
10/1000
25
GR 1089 2nd level lightning surge telecom port
(Equipment under test shall not become a fire or
electrical safety hazard)
Max.
Minimum
Minimum
Rise/Min.
Peak
Surge
Peak
Decay
Voltage
Current (A)
(μs)
(V)
1
5000
500
2/10
Alter5000
500/8=625
8/10
native
Fuse
Choices
1.25, 2.0
2
1000
100
10/360
25
1.25, 2.0
3
1000
100
10/1000
25
1.25, 2.0
4
2500
500
2/10
10
1.25, 2.0
5
1000
25
10/360
5
0.5, 1.25, 2.0
Repetitions
Fuse
Each
Choices
Polarity
1
0.5, 1.25, 2.0
1
0.5, 1.25, 2.0
The 0.5 fuse will open during these test conditions. The 1.25 F 2.0 will not open thus
providing operational compliance.
If sufficient series resistance is used, then the 0.5 fuse may be used in test conditions 1-4.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
461 Series
86
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/461.html for current information.
Surface Mount Fuses
Surge Resistant > 461 Series TeleLink® Fuse
GR 1089 AC power fault 2nd level (fuse can open but
must open in a safe and controlled manner)
GR 1089 AC power fault 1st level inter-building (fuse
not allowed to open)
1
2
3
4
5
6
7
8
9
Short
Circuit
Current
(A)
0.33
0.17
Vrms
50
100
200,400,
1
600
1000
1
Diagram Diagram
600
0.5
440
2.2
600
3
1000
5
Primary
Fuse
Protector Choices
Hits
Duration
1
1
15 min.
15 min.
removed
removed
1.25, 2.0
1.25, 2.0
60
1 sec.
removed
1.25, 2.0
60
60
1
5
1
1
1 sec.
5 sec.
30 sec.
2 sec.
1.1 sec.
0.4 sec.
operative
removed
removed
removed
removed
in place
1.25, 2.0
1.25, 2.0
1.25, 2.0
1.25, 2.0
1.25, 2.0
1.25, 2.0
Test
Circuit
Vrms
1
2
3
4
5
120,277
600
600
100-600
Diagram
Short
Circuit
Current
(A)
25
60
7
2.2
Diagram
Duration
Fuse
15 min.
5 sec.
5 sec.
15 min..
15 min.
0.5, 1.25, 2.0
0.5, 1.25, 2.0
0.5, 1.25, 2.0
0.5, 1.25, 2.0
0.5, 1.25, 2.0
Fuse must open before wiring simulator fuse (MDL 2.0).
461 Series
Test
TIA –968-A (formerly FCC Part 68) Surge Waveforms (fuse can not open during type B events)
Surge
Metallic A
Longitudinal A
Metallic B
Longitudinal B
Voltage (V)
800
1500
1000
1500
Waveform (μs)
10 x 560
10 x 160
9 x 720
9 x 720
Current (A)
100
200
25
37.5
Reps
1 ea. polarity
1 ea. polarity
1 ea. polarity
1 ea. polarity
Recommended Fuse
1.25
1.25
1.25
1.25
For the type A events the 0.5 fuse will open, providing non-operational compliance. The 1.25 & 2.0 will not open, providing for operational compliance with TIA-968-A type A surge events.
UL 60950 requirements
Dimensions
UL60950 (EN 60950) (formerly UL 1950) Power Cross (L
= longitudinal, M = metallic)
Test
Number
L1
L2
L3
L4
L5
M1
M2
M3
M4
Voltage (V) Current (A)
600
600
600
200
120
600
600
600
600
40
7
2.2
2.2
25
40
7
2.2
2.2
Time
1.5 sec.
5 sec.
30 min.
30 min.
30 min.
1.5 sec.
5 sec.
30 min.
30 min.
3.25
(.128")
10.10
(.397")
Fuse
Choices
0.5, 1.25, 2.0
0.5, 1.25, 2.0
0.5, 1.25, 2.0
0.5, 1.25, 2.0
0.5, 1.25, 2.0
0.5, 1.25, 2.0
0.5, 1.25, 2.0
0.5, 1.25, 2.0
0.5, 1.25, 2.0
LF 1.25A T
3.12
(.123")
6.10
(.240")
3.12
(.123")
3.43
(.135")
12.6
(.496")
1.70 typ
(.067")
Recommended Pad Layout
Selection of test number depends on current limiting F fire enclosure/spacing of end product
t "8(MJOFDPSESFNPWFT-.UFTUSFRVJSFNFOU
t -DPOEVDUFEPOMZJGQSPEVDUEPFTOPUQBTTTFDUJPO
t -.-.-.DPOEVDUFEJGOPUJOBmSFFODMPTVSF
Fuse must open before the wiring simulator fuse (MDL 2.0).
UL60950 (EN 60950) (formerly UL 1950) Impulse Test and Steady-State Electric Strength Test
Test
Voltage (V)
Current (A)
Waveform
Repetitions
Fuse Choices
For handheld units
2500
62.5
10 x 700ms
+/- 10 w/60 sec. rest
0.5, 1.25, 2.0
Non handheld
1500
37.5
10 x 700ms
+/- 10 w/60 sec. rest
0.5, 1.25, 2.0
Impulse
Steady-State
For handheld units
1500
60Hz
0.5, 1.25, 2.0
Non handheld
1000
60Hz
0.5, 1.25, 2.0
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/461.html for current information.
87
461 Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
®
Transientology
Surge Resistant > 461 Series TeleLink
Fuse
Soldering Parameters
Pre Heat
Pb – Free assembly
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 120 secs
Average ramp up rate (Liquidus Temp
(TL) to peak
5°C/second max.
TS(max) to TL - Ramp-up Rate
5°C/second max.
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 90 seconds
Peak Temperature (TP)
250+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
6°C/second max.
Time 25°C to peak Temperature (TP)
8 minutes max.
Do not exceed
260°C
tP
TP
Critical Zone
TL to TP
Ramp-up
TL
TS(max)
Temperature
Reflow Condition
tL
Ramp-down
Preheat
TS(min)
tS
25
time to peak temperature
(t 25ºC to peak)
Time
Product Characteristics
Materials
Body: Ceramic
Terminations: Silver-plated Caps
Product Marking
Brand Logo, Ampere Rating
Thermal Shock
MIL-STD-202, Method 107, Test
Condition B, -55°C to +125°C, 30
minutes @ each extreme
Mechanical Shock
MIL-STD-202, Method 213, Test
Condition A - Half Sine, 50 G's, 11
msec duration
Operating
Temperature
-55°C to 125°C
Moisture Sensitivity
Level
Level 1, J-STD-020C
High Frequency
Vibration
MIL-STD-202, Method 204, Test
Condition D
Solderability
IEC-60127-4 (215°C immersion, 3 sec)
Moisture Resistance
MIL-STD-202, Method 106, 50 cycles
Resistance to
Dissolution of
Metallization
IPC / EIA J-STD-002A-Test D 260°C for
120 sec
Terminal Strength
Board deflection per EIA / IS-722,
1mm Deflection for 1 minute
Terminal Attachment
MIL-STD-202, Method 211, Test
Condition A, 5 lbs applied to end caps
Part Numbering System
0461 1.25 E R
SERIES
AMP Code*
Refer to Electrical
Characteristics table
QUANTITY Code
E = 2500 pcs
PACKAGING Code
R = Tape and Reel
*Example:
2 amp product is 0461002.ER
(1.25 amp product shown above)
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
24mm Tape and Reel
EIA RS-481-2 (IEC 286, part 3)
2500
ER
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
461 Series
88
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/461.html for current information.
Surface Mount Fuses
Surge Resistant > 461E Series Enhanced TeleLink® Fuse
461E Series Enhanced TeleLink® Fuse
The Littelfuse 461E Series Enhanced TeleLink® Surface
Mount, Surge – Tolerant Fuse, is the next generation of
the popular 461 Telelink® Fuse. With optimized opening
times at certain overload conditions, this enhanced
TeleLink® Fuse works in harmony with Littelfuse’s new
SIDACtor® Transient Voltage Suppressor products in the
QFN package. This combination provides a compliant
solution for standards and recommendations, such as,
GR–1089–Core, TIA–968–A, UL/EN/IEC 60950 and ITU
K.20/.21. The coordination requirement contained in
GR–1089–Core and ITU K.20/.21, may require a series
impedance device.
Features
Agency Approvals
AGENCY
AGENCY FILE NUMBER
AMPERE RANGE
E10480
1.25 A
t 1SPWJEFT(3o
compliant overcurrent
protection with Littelfuse
t .FFUT6-&/*&$
SIDACtor®, TVS or GDT,
3rd Edition, Power Fault
without
the need of any
Requirements stand
additional
resistance.
alone.
t %FTJHOFEGPSDPNQMJBODF t 1SPEVDUJT3P)4
compliant and
with Telcordia GR–1089–
compatible with leadCORE and TIA–968–A
free solders and higher
(formerly FCC Part 68)
temperature profiles.
Surge Specifications.
t 4VSGBDF.PVOU4VSHF
Resistant Slo-Blo® Fuse.
Electrical Characteristics for Series
% of Ampere
Rating
Opening Time
100%
4 Hours, Minimum
2.2A (176%)
300 Seconds, Maximum
200%
1 Second, Minimum;
60 Seconds, Maximum
t %FTJHOFEUPTFSWF
the requirements
of a wide range of
telecommunication and
networking equipment.
Maximum Temperature Rise
Telecom Nano2 Fuse
Temperature Reading
04611.25E
< 82°C (180°F)
461E Series
Description
Applications
Higher Currents and PCB layout designs can affect this parameter.
t 5&+BOE)%4-
Readings are measured at rated current after temperature stabilizes.
t 4-*$JOUFSGBDFQPSUJPOPG'JCFSUPUIF$VSC'55$
BOE
Fiber to the Premises (FTTP)
t /PO'JCFS4-*$JOUFSGBDFGPS$FOUSBM0GmDF$0
locations and Remote Terminals (RT)
t Y%4-BQQMJDBUJPOTTVDIBT"%4-"%4-7%4-BOE
VDSL2+
t &UIFSOFU#BTF5
t 1054BQQMJDBUJPOTTVDIBTNPEFNTBOTXFSJOH
machines, telephones, fax machines, and security
systems
t *4%/i6wJOUFSGBDF
t #BZTUBUJPO5&+5%4
USVOLDBSET
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/461E.html for current information.
89
Revised: Feb 18, 2009
461E Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
®
Transientology
Surge Resistant > 461E Series Enhanced TeleLink
Fuse
Electrical Specifications by Item
Ampere
Rating
(A)
Amp Code
1.25
1.25
Max
Voltage
Rating
(V)
Interrupting
Rating
600
60 amperes @600 VAC
Nominal Cold
Resistance
(Ohms)
Nominal
Melting
I2t (A2sec)
0.112
14.2
Agency Approvals
x
I t is calculated at 10 msec or less. I t at 10 times rated current has a typical value of 17 A sec (1.25A)
2
2
2
Resistance is measured at 10% rated current.
Average Time Current Curves
1.25A
Temperature Rerating Curve
100
TIME IN SECONDS
10
1
0.1
Operating Temperature is -55° C to +125° with proper correction factor applied.
Ambient temperature effects are in addition to the normal derating.
Note:
0.01
1. Derating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
0.001
0.1
1
10
CURRENT IN AMPERES
100
1000
GR 1089 Inter-Building Requirements
GR 1089 1st level lighting surge inter-building
(Equipment under test can not be damaged and must
continue to operate properly)
GR 1089 2nd level lightning surge telecom port
(Equipment under test shall not become a fire or
electrical safety hazard)
Max.
Minimum
Minimum
Rise/Min.
Peak
Surge
Peak
Decay
Voltage
Current (A)
(μs)
(V)
1
5000
500
2/10
Alter5000
500/8=625
8/10
native
Minimum Minimum Max.
Repetitions
Peak
Peak
Rise/Min.
Surge
Each
Voltage
Current
Decay
Polarity
(V)
(A)
(μs)
1
600
100
10/1000
25
2
1000
100
10/360
25
3
1000
100
10/1000
25
4
2500
500
2/10
10
5
1000
25
10/360
5
Repetitions
Each
Polarity
1
1
The 1.25 will not open thus providing operational compliance.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
461E Series
90
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/461E.html for current information.
Surface Mount Fuses
Surge Resistant > 461E Series Enhanced TeleLink® Fuse
GR 1089 AC power fault 2nd level (fuse can open but
must open in a safe and controlled manner)
GR 1089 AC power fault 1st level inter-building (fuse
not allowed to open)
1
2
3
4
5
6
7
8
9
Short
Circuit
Current (A)
50
0.33
100
0.17
200,400,600
1
1000
1
Diagram
Diagram
600
0.5
440
2.2
600
3
1000
5
Vrms
Hits
Duration
Primary
Protector
1
1
60
60
60
1
5
1
1
15 min.
15 min.
1 sec.
1 sec.
5 sec.
30 sec.
2 sec.
1.1 sec.
0.4 sec.
removed
removed
removed
operative
removed
removed
removed
removed
in place
Test
Circuit
Vrms
1
2
3
4
5
120,277
600
600
100-600
Diagram
Short
Circuit
Current
(A)
25
60
7
2.2
Diagram
Duration
15 min.
5 sec.
5 sec.
15 min.
15 min.
Fuse must open before wiring simulator fuse (MDL 2.0).
461E Series
Test
TIA –968-A (formerly FCC Part 68) Surge Waveforms (fuse can not open during type B events)
Surge
Metallic A
Longitudinal A
Metallic B
Longitudinal B
Voltage (V)
800
1500
1000
1500
Waveform (μs)
10 x 560
10 x 160
9 x 720
9 x 720
Current (A)
100
200
25
37.5
Reps
1 ea. polarity
1 ea. polarity
1 ea. polarity
1 ea. polarity
For the type A events the fuse will not open, providing for operational compliance with TIA-968-A type A surge events.
UL 60950 requirements
Dimensions
UL60950 (EN 60950) (formerly UL 1950) Power Cross
(L = longitudinal, M = metallic)
Test
Number
L1
L2
L3
L4
L5
M1
M2
M3
M4
Voltage (V) Current (A)
600
600
600
200
120
600
600
600
600
40
7
2.2
2.2
25
40
7
2.2
2.2
3.25
(.128")
10.10
(.397")
Time
1.5 sec.
5 sec.
30 min.
30 min.
30 min.
1.5 sec.
5 sec.
30 min.
30 min.
3.12
(.123")
6.10
(.240")
3.12
(.123")
LF 1.25A
3.43
(.135")
12.6
(.496")
1.70 typ
(.067")
Recommended Pad Layout
Selection of test number depends on current limiting F fire enclosure/spacing of end product
t "8(MJOFDPSESFNPWFT-.UFTUSFRVJSFNFOU
t -DPOEVDUFEPOMZJGQSPEVDUEPFTOPUQBTTTFDUJPO
t -.-.-.DPOEVDUFEJGOPUJOBmSFFODMPTVSF
Fuse must open before the wiring simulator fuse (MDL 2.0).
UL60950 (EN 60950) (formerly UL 1950) Impulse Test and Steady-State Electric Strength Test
Test
Voltage (V)
Current (A)
Waveform
Repetitions
For handheld units
2500
62.5
10 x 700ms
-/+ 10 w/60 Sec. rest
Non handheld
1500
37.5
10 x 700ms
-/+ 10 w/60 Sec. rest
Impulse
Steady-State
For handheld units
1500
60Hz
Non handheld
1000
60Hz
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/461E.html for current information.
91
461E Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
®
Transientology
Surge Resistant > 461E Series Enhanced TeleLink
Fuse
Soldering Parameters
Pre Heat
Pb – Free assembly
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 120 Seconds
Average ramp up rate (Liquidus Temp
(TL) to peak
5°C/Sec. Max.
TS(max) to TL - Ramp-up Rate
5°C/Sec. Max.
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 90 Seconds
Peak Temperature (TP)
250+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
20 – 40 Seconds
Ramp-down Rate
6°C/Sec. Max.
Time 25°C to peak Temperature (TP)
8 Minutes Max.
Do not exceed
260°C
tP
TP
Critical Zone
TL to TP
Ramp-up
TL
TS(max)
Temperature
Reflow Condition
tL
Ramp-down
Preheat
TS(min)
tS
25
time to peak temperature
(t 25ºC to peak)
Time
Product Characteristics
Materials
Body: Ceramic
Terminations: Silver-plated Caps
Product Marking
Brand Logo, Ampere Rating
Thermal Shock
MIL–STD–202, Method 107, Test
Condition B, 200 cycles, -55°C to
+125°C, 30 minutes @ each extreme
Mechanical Shock
MIL–STD–202, Method 213, Test
Condition A – Half Sine, 50 G's, 11
mSec duration
Operating
Temperature
-55°C to +125°C
Moisture Sensitivity
Level
Level 1, J–STD–020C
High Frequency
Vibration
MIL–STD–202, Method 204, Test
Condition D
Solderability
IEC–60127–4 (215°C immersion, 3 Sec.)
Moisture Resistance
MIL–STD–202, Method 106, 50 cycles
Resistance to
Dissolution of
Metallization
IPC / EIA J–STD–002A–Test D 260°C for
120 Sec.
Terminal Strength
Board deflection per EIA / IS–722,
1mm Deflection for 1 Minute
Terminal Attachment
MIL–STD–202, Method 211, Test
Condition A, 5 lbs applied to end caps
Part Numbering System
0461 1.25 E E R
SERIES
AMP Code
Enhanced TELELINK®
QUANTITY Code
E = 2500 pcs
PACKAGING Code
R = Tape and Reel
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity & Packaging Code
24mm Tape and Reel
EIA RS-481-2 (IEC 286, part 3)
2500
ER
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
461E Series
92
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/461E.html for current information.
Surface Mount Fuses
NANO2® > 154 OMNI-BLOK® Fuse and Holder Combination
154/154T Series OMNI-BLOK® Fuse and Holder Assembly
PS
E
Description
The RoHS Compliant 154 Series OMNI-BLOK® offers a
solution for efficient installation and easy replacement of
miniature Nano2® surface mount fuses.
The fuse holder unit may be sold as a stand alone item,
shipped in bulk quantity (not pre-packaged in tape and reel
cartridges) using part number 01550900. Please contact
Littelfuse for additional information.
Agency Approvals
Features
Recognized under the Components Program of Underwriters Laboratories
and Certified by CSA. Approved by METI from 1 through 5 amperes.
AGENCY
AGENCY FILE
NUMBER
E14721
NBK030205-E10480A
PS
E
NBK030205-E10480B
NBK101105-E184655
t 8JEFSBOHFPGDVSSFOU
t&BTZGVTFSFQMBDFNFOU
rating available
t.JOJBUVSFTJ[F
- Fast-Acting: 62mA-10A
t3P)4DPNQMJBOU
- Slo-Blo®: 375mA-5A
t7FSZGBTUBDUJOHBOE5JNF
Lag options available
t 8JEFPQFSBUJOH
temperature range
t )PMEFSTJ[FEUPmUBSBOHF
of Nano2® type fuses
t )FBUSFTJTUBOUGVTFIPMEFS
UL94 V-0
t -PXGVTFUFNQFSBUVSF
de-rating
AMPERE RANGE
154 Fast-acting: .062A-10A
154 Time-lag: .375A-5A
154 Fast-acting: 1A
154 Fast-acting: 1A-5A
154 Time-lag: 1A-5A
154 Fast-acting: 6.3A-10A
154 Series
Offered in a tape and reel package, this fuse and holder
combination can be installed on a PC board as an efficient
single step. Fuse replacement can be accomplished
without exposing the PC board to the detrimental effects
of solder heat.
Ordering Information
With Very Fast-Acting Fuse Installed
Catalog
Number
Ampere
Rating (A)
Amp
Code
With Time-Lag (Slo-Blo®) Fuse Installed
Fuse
Furnished*
Catalog
Number
Ampere
Rating
Amp
Code
Fuse
Furnished*
0154.062
0.062
.062
0451.062
0154.375 T
3/8
.062
0454.375
0154.080
0.08
.080
0451.080
0154.500 T
1/2
.500
0454.500
0154.100
0.1
.100
0451.100
0154.750 T
3/4
.750
0454.750
0154.125
0.125
.125
0451.125
0154001. T
1
001.
0454001.
0154.160
0.16
.160
0453.160
0154.200
0.2
.200
0453.200
015401.5 T
11/2
01.5
045401.5
0154.250
0.25
.250
0453.250
0154002. T
2
002.
0454002.
0154.315
0.315
.315
0453.315
015402.5 T
21/2
02.5
045402.5
0154.375
0.375
.375
0453.375
0154003. T
3
003.
0454003.
0154.400
0.4
.400
0453.400
0154.500
0.5
.500
0453.500
015403.5 T
31/2
03.5
045403.5
0154.630
0.63
.630
0453.630
0154004. T
4
004.
0454004.
0154.750
0.75
.750
0453.750
0154005. T
5
005.
0454005.
0154.800
0.8
.800
0453.800
0154001.
1
001.
0453001.
015401.25
1.25
1.25
04531.25
* The 453 and 454 Series fuses identified above have silver plated end caps,
015401.5
1.5
01.5
045301.5
designed to accommodate solder reflow processes:
015401.6
1.6
01.6
045301.6
For 453 Series fuse replacement, either 451, 453 or 448 Series may be used.
0154002.
2
002.
0453002.
For 454 Series fuse replacement, either 452, 454 or 449 Series may be used.
015402.5
2.5
02.5
045302.5
0154003.
3
003.
0453003.
For detailed operating characteristic and performance information for each
01543.15
3.15
3.15
04533.15
of the fuse series mentioned above, please refer to their respective data
015403.5
3.5
03.5
045303.5
available online at www.littelfuse.com.
0154004.
4
004.
0453004.
0154005.
5
005.
0453005.
015406.3
6.3
06.3
045306.3
0154007.
7
007.
0453007.
0154008.
8
008.
0453008.
0154010.
10
010.
0453010.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/154.html
or /154T.html for current information.
93
Revised: May 22, 2009
154 Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
NANO2® > 154 OMNI-BLOK® Fuse and HolderTransientology
Combination
Soldering Parameters
Sn-Pb Eutectic
Assembly
Pre Heat
- Temperature Min (Ts(min))
100°C
- Temperature Max (Ts(max))
150°C
- Time (Min to Max) (Ts)
60 – 120 secs
Average ramp up rate (Liquidus Temp
(TL) to peak
Reflow
- Temperature (TL) (Liquidus)
- Time (tL)
TL
TS(max)
183°C
Time within 5°C of actual peak
Temperature (tp)
10 – 30 seconds
Ramp-down Rate
6°C/second Max
Time 25°C to peak Temperature (TP)
6 minutes Max.
Do not exceed
230°C
tL
Ramp-down
Preheat
TS(min)
60 – 90 seconds
225+0/-5 °C
Critical Zone
TL to TP
Ramp-up
3°C/second max
Peak Temperature (TP)
tP
TP
Temperature
Reflow Condition
tS
25
time to peak temperature
(t 25ºC to peak)
Dimensions
Time
Part Numbering System
1
5
5
0154 001. D R T
7A
SERIES
L
F
LF
AMP Code
9.73
(.383") REF.
Refer to Ordering information
section on previous page.
FUSE
QUANTITY Code
3.81
(.150")
D = 1500 pcs
PACKAGING Code
R = Tape and Reel
5.03
(.198")
TYPE Code
T = Time-Lag (Slo-Blo®)
2.13
(.084")
REF.
10.62
(.418")
Example:
1.5 amp Fast-acting product is
015401.5DR.
1.5 amp Time-lag product is
015401.5DRT.
(1 amp product shown above).
3.81
(.150")
4.24
(.167")
Recommended Pad Layout
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
Reel Pack
EIA RS–481–2 (IEC 286, part 3)
1500
DR
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
154 Series
94
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/154.html
or /154T.html for current information.
Surface Mount Fuses
NANO2® > 157 Fuse and Holder Combination
157 Series – Standard Nano Fuse and Clip Assembly
PS
E
Description
Features
t 4VSGBDF.PVOUBCMF
Very Fast Acting Fuse.
Agency Approvals
AGENCY
PS
E
AGENCY FILE NUMBER
AMPERE RANGE
E14721
0.062A ~ 10A
NBK030205-E10480A
NBK030205-E10480B
NBK101105-E184655
1A
1.5A - 5A
6.3A - 10A
t &BTJMZSFQMBDFBCMF
on PC Board (Field
Replaceable)
t 'VMMZDPNQBUJCMFXJUI
t 3P)4$PNQMJBOU
RoHS/Pb-Free solder
alloys and higher
t "WBJMBCMFJOSBUJOHTPG
temperature profiles
0.062 ~ 10 Amperes.
associated with leadfree
assembly.
Electrical Characteristics for Series
157 Series
The 157 Series – Standard Nano Fuse/Clip assembly is a
small, square, very fast acting surface mount fuse that is
assembled in surface mountable fuse clips. The fuse clip
and pre-installed fuse combination can be automatically
placed in PC Board in one efficient manufacturing
operation. It permits quick and easy replacement of fuses
without performing desoldering process, even in the field
and without exposing the PC Board to detrimental effects
of rework solder heat.
Applications
% of Ampere Rating
Opening Time at 25ºC
100%
4 hours Minimum
200%
5 secs. Maximum
t *OTUSVNFOUBUJPO
t 5FMFDPNNVOJDBUJPOT
t #BTF4UBUJPOT
Electrical Specifications by Item
Ampere Rating
(A)
Amp
Code
Max
Voltage Rating
(V)
0.062
0.125
0.200
0.250
0.315
0.375
0.500
0.750
1.0
1.5
2.0
2.5
3.0
3.5
4
5
6.3
7
8
.062
.125
.200
.250
.315
.375
.500
.750
001
01.5
002
02.5
003
03.5
004
005
06.3
007
008
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
10
010
125
Interrupting
Rating
(A)
50A @ 125 VAC/VDC
300A @ 32 VDC
35A @ 125 VAC / 50A @125 VDC
300A @ 32VDC
Agency Approvals
Nominal Cold
Resistance
(Ohms)
Nominal
Melting
I2t (A2sec)
5.5372
1.7059
1.3971
1.0496
0.3881
0.6083
0.4181
0.2458
0.1537
0.0634
0.0373
0.0288
0.0229
0.0203
0.0163
0.0127
0.0098
0.0092
0.0079
0.00019
0.00286
0.00652
0.01126
0.0311
0.0425
0.0795
0.185
0.459
0.853
0.530
1.029
1.650
2.469
3.152
5.566
9.17
10.32
20.23
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
0.0058
26.46
X
X
PS
E
1. Cold resistance measured at less than 10% of rated current at 23ºC.
2. I2t values stated for 8ms opening time.
3. Agency Approval Table Key: X=Approved or Certified, P=Pending and Blank=Not Approved
4. Have special electrical characteristic needs? Contact Littelfuse to learn more about application specific options.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/157.html for current information.
95
Revised: Apr 16, 2009
157 Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
NANO2® > 157 Fuse and HolderTransientology
Combination
2.0 A
2.50 A
3.0 A
3.50 A
4.0 A
5.0 A
6.30 A
7.0 A 8.0 A
10.0 A
0.75 A
1.0 A
1.50 A
0.2 A
0.25 A
0.315A
0.375 A
0.5 A
0.062A
Average Time Current Curves
0.125 A
Temperature Rerating Curve
TIME IN SECONDS
10.000
Note:
1.000
0.100
1. Derating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
0.010
0.001
0.01
0.1
1
10
100
CURRENT IN AMPS
Soldering Parameters
Pre Heat
Pb – Free assembly
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 120 secs
5°C/second max.
TS(max) to TL - Ramp-up Rate
5°C/second max.
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 90 seconds
TL
TS(max)
tL
Ramp-down
TS(min)
Preheat
tS
25
Peak Temperature (TP)
250
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max.
Time 25°C to peak Temperature (TP)
8 minutes max.
Do not exceed
260°C
+0/-5
Critical Zone
TL to TP
Ramp-up
- Temperature Min (Ts(min))
Average ramp up rate (Liquidus Temp
(TL) to peak
Reflow
tP
TP
Temperature
Reflow Condition
time to peak temperature
(t 25ºC to peak)
Time
°C
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
157 Series
96
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/157.html for current information.
Surface Mount Fuses
NANO2® > 157 Fuse and Holder Combination
Body: Ceramic
Cap: For 0.062A ~ 0.125A – Au plated Brass
For 0.200A ~ 10A – Silver plated Brass
Clip Plating: Matte Tin
Materials
Product
Marking
Body: Brand Logo, Current Rating
Clip Retention
Force applied at fuse center, perpendicular to
the long axis (@ 0.75 lbs. MIN)
Solderability
MIL-STD-202, Method 208 / IPC/ EIA /
JEDEC J-STD002B, Test Condition A
Humidity Test
MIL –STD-202, Method 103 @ 85ºC / 85%RH,
1000 hours
Resistance to
Solvents
MIL-STD-202, Method 215 (3 solvent types)
Operating
Temperature
-55ºC to 125ºC with proper derating
Thermal Shock
MIL-STD-202, Method 107,
Test Condition B
(5 cycles -65ºC to +125ºC)
Vibration
MIL-STD-202, Method 201
(10-55 Hz)
Moisture Resistance
MIL-STD-202, Method 106,
10 cycles
Salt Spray/
Atmosphere
MIL-STD-202, Method 101,
Test Condition B (48 hrs.),
5% NaCl in De-ionized Water
Shock
MIL-STD-202, Method 213,
Test Condition I (100 G’s peak for 6
milliseconds)
Part Numbering System
Dimensions
6.50 ± 0.20
[0.256]
157 Series
Product Characteristics
0157 001. D R
6.10
[0.240]
2.69
[0.106]
SERIES
LF
1A
3.7 ± 0.13
[0.146]
PACKING OPTION
2.69
[0.106]
AMP CODE
1.45
[0.057]
R = Tape and Reel
QUANTITY CODE
D = 1500 pcs
3.70
[0.146]
3.90 ± 0.13
[0.154]
3.40
[0.134]
2.50 ± 0.2
[0.098]
"A"
"B"
0.10
7.26
[0.29]
2.46
[0.10]
3.00
[0.12]
2.40
[0.09]
PCB Recommendation for Thermal Management
1. Minimum Copper Layer Thickness = 100um
2. Minimum Copper Trace Width = 10mm
Note:
Alternate methods of thermal management may be used. In such cases, under normal
operations, the maximum temperature of the fuse body should not exceed 80ºC in a 25ºC
ambient environment.
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
Tape and Reel
Surface Mount
1500
DR
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/157.html for current information.
97
157 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
98
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Surface Mount Fuses
NANO2® > 157T Fuse and Holder Combination
157T Series – Standard Nano Fuse and Clip Assembly
PS
E
Description
The fuse clip and pre-installed fuse combination can
be automatically placed in PC Board in one efficient
manufacturing operation. It permits quick and easy
replacement of fuses without performing desoldering
process, even in the field and without exposing the PC
Board to detrimental effects of rework solder heat.
Agency Approvals
AGENCY
PS
E
AGENCY FILE NUMBER
AMPERE RANGE
E14721
0.375A ~ 5A
NBK030205-E10480A
NBK030205-E10480B
1A
1.5A-5A
Features
t 4VSGBDF.PVOUBCMF
Time-Lag Fuse.
t 'VMMZDPNQBUJCMFXJUI
RoHS/Pb-Free solder
alloys and higher
temperature profiles
associated with
leadfree assembly.
Electrical Characteristics for Series
% of Ampere
Rating
% of Ampere
Rating
Opening Time at 25ºC
100%
0.375A ~ 5A
4 hours, Minimum
200%
0.375A ~ 5A
300%
0.375A ~ 5A
800%
0.375A ~ 5A
157T Series
The 157T Series Fuse/Clip assembly is a small, square,
Time-Lag, surface mount fuse that is assembled in surface
mountable fuse clips. The unique time delay feature of this
fuse design helps solve the problem of nuisance “opening”
by accommodating inrush currents that normally cause a
fast acting fuse to open.
t &BTJMZSFQMBDFBCMF
on PC Board (Field
Replaceable)
t 3P)4$PNQMJBOU
t "WBJMBCMFJOSBUJOHTPG
0.375 ~ 5 Amperes.
Applications
1 sec. Minimum,
60 secs. Maximum
0.20 secs. Minimum,
3.00 secs. Maximum
0.02 secs. Minimum,
0.10 secs. Maximum
t *OTUSVNFOUBUJPOT
t 5FMFDPNNVOJDBUJPOT
t #BTF4UBUJPOT
Electrical Specifications by Item
Ampere Rating
(A)
Amp
Code
Max
Voltage Rating
(V)
0.375
0.500
0.750
1.00
1.50
2.00
2.50
3.00
3.50
4.00
5.00
.375
.500
.750
001
01.5
002
02.5
003
03.5
004
005
125
125
125
125
125
125
125
125
125
125
125
Interrupting
Rating
(A)
Nominal Cold
Resistance
(Ohms)
Nominal
Melting
I2t (A2sec)
50A @ 125VAC/VDC
1.2214
0.7047
0.3602
0.2245
0.0934
0.0629
0.0452
0.0342
0.0226
0.0188
0.0138
0.101
0.240
0.904
1.98
3.65
8.20
15.0
20.16
26.53
34.40
53.72
Agency Approvals
PS
E
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1. Cold resistance measured at less than 10% of rated current at 23ºC.
2. I2t values stated for 8ms opening time.
3. Agency Approval Table Key: X=Approved or Certified, P=Pending and Blank=Not Approved
4. Have special electrical characteristic needs? Contact Littelfuse to learn more about application specific options
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/157T.html for current information.
99
Revised: Jan 12, 2009
157T Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
NANO2® > 157T Fuse and HolderTransientology
Combination
2.0A
2.5A
3.0A
3.5A
4A
5A
.75A
1.0A
1.5A
.50A
Average Time Current Curves
.375A
Temperature Rerating Curve
100
TIME IN SECONDS
10
1
0.1
Note:
0.01
1. Derating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
0.001
0.1
1
10
100
CURRENT IN AMPS
Soldering Parameters
Pre Heat
Pb – Free assembly
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 120 secs
Average ramp up rate (Liquidus Temp
(TL) to peak
5°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 90 seconds
Peak Temperature (TP)
250+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
260°C
tP
TP
Critical Zone
TL to TP
Ramp-up
TL
TS(max)
Temperature
Reflow Condition
tL
Ramp-down
TS(min)
Preheat
tS
25
time to peak temperature
(t 25ºC to peak)
Time
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
157T Series
100
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/157T.html for current information.
Surface Mount Fuses
NANO2® > 157T Fuse and Holder Combination
Body: Ceramic
Cap: For 0.375A ~ 5A – Silver plated Brass
Clip Plating: Matte Tin
Materials
Product
Marking
Body: Brand Logo, Current Rating, “T” for
Time-Lag
Clip Retention
Force applied at fuse center, perpendicular to
the long axis (@0.75 lbs. MIN)
Solderability
MIL-STD-202, Method 208 / IPC/ EIA /
JEDEC J-STD002B, Test Condition A
Humidity Test
MIL –STD-202, Method 103 @ 85ºC / 85%RH,
1000 hours
Resistance to
Solvents
MIL-STD-202, Method 215 (3 solvent types)
Operating
Temperature
-55ºC to 125ºC with proper derating
Thermal Shock
MIL-STD-202, Method 107,
Test Condition B
(5 cycles -65ºC to +125ºC)
Vibration
MIL-STD-202, Method 201
(10-55 Hz)
Moisture Resistance
MIL-STD-202, Method 106,
10 cycles
Salt Spray/
Atmosphere
MIL-STD-202, Method 101,
Test Condition B (48 hrs.), 5% NaCl in
De-ionized Water
Shock
MIL-STD-202, Method 213,
Test Condition I (100 G’s peak for 6
milliseconds)
Part Numbering System
Dimensions
6.50 ± 0.20
[0.256]
0157 005. D R T
6.10
[0.240]
2.69
[0.106]
LF
T
3.7 ± 0.13
[0.146]
SERIES
TIME-LAG FUSE
AMP CODE
PACKING OPTION
2.69
[0.106]
1A
1.45
[0.057]
157T Series
Product Characteristics
3.70
[0.146]
R = Tape and Reel
QUANTITY CODE
D = 1500 pcs
3.40
[0.134]
3.90 ± 0.13
[0.154]
2.50 ± 0.2
[0.098]
"A"
"B"
0.10
7.26
[0.29]
2.46
[0.10]
3.00
[0.12]
2.40
[0.09]
PCB Recommendation for Thermal Management
1. Minimum Copper Layer Thickness = 100um
2. Minimum Copper Trace Width = 10mm
Note:
Alternate methods of thermal management may be used. In such cases, under normal
operations, the maximum temperature of the fuse body should not exceed 80ºC in a 25ºC
ambient environment.
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
Tape and Reel
Surface Mount
1500
DRT
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/157T.html for current information.
101
157T Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
102
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Surface Mount Fuses
159 Fuse and Clip Series
159 Series Telelink® Fuse and Clip Assembly
Description
It meets UL 60950 power cross requirements and is
designed to allow compliance with Telcordia GR-1089CORE and TIA-968-A Surge Specifications. The product
provides coordinated protection with Littelfuse SIDACtor®
protection thyristors without series resistors.
Agency Approvals
AGENCY
AGENCY FILE NUMBER
AMPERE RANGE
E14721
0.5A, 1.25A, 2.0A
Features
t 0GGFSTMPXQSPmMF
easily-replaceable fuse
alternative compatible
with automated
PCB surface mount
equipment
Electrical Characteristics for Series
% of Ampere
Rating
Opening Time
100%
4 hours, Minimum
250%
1 sec, Minimum
120 secs Maximum
t $PNFTTVQQMJFEXJUI
surge resistant Littelfuse
461 series TeleLink®
time-lag Slo-Blo® fuse
159 Series
The 159 Series product is a metal fuse clip with preinstalled Littelfuse 461 Series TeleLink® fuse. This fuse
and clip combination can be automatically installed in PC
Boards in one efficient manufacturing operation. It permits
quick and easy fuse replacement without exposing the PC
Board and other components to risks of rework solder heat
as required with direct surface mount fuses.
t 1SPWJEFTDPPSEJOBUFE
protection with Littelfuse
SIDACtor® devices and
GDTs, without series
resistors.
t $MJQGVMMZDPNQBUJCMF
with RoHS/Pb-Free
solder alloys and higher
temperature profiles
associated with leadfree
assembly
t 'VTFEFTJHOFEUPBMMPX
compliance with Telcordia t "WBJMBCMFJOSBUJOHTPG
0.5-2.0 Amperes
GR-1089-CORE and TIA968-A (formerly FCC Part
68) Surge Specifications.
Applications
t 5FMFDPNFRVJQNFOU1054
BQQMJDBUJPOTTVDIBT
modems, answering machines, telephones, fax
machines, and security systems
t /FUXPSLFRVJQNFOUTVDIBT
- SLIC interface portion of Fiber to the Curb (FTTC)
and Fiber to the Premises (FTTP)
- Non-Fiber SLIC interface for Central Office (CO)
locations and Remote Terminals (RT)
- xDSL applications such as ADSL, ADSL2+, VDSL,
and VDSL2+
- Ethernet 10/100/1000BaseT
- ISDN “U” interface
- Baystation T1/E1/J1, T3 (DS3) trunk cards
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/159.html for current information.
103
Revised: Jan 12, 2009
159 Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
Transientology
159 Fuse and
Clip Series
Electrical Specifications by Item
Ampere
Rating
(A)
Amp Code
Max
Voltage Rating
(V)
0.50
.500
600
1.25
1.25
600
2.00
002.
600
Interrupting
Rating
60 amperes @600 VAC.
Agency Approvals
Nominal Cold
Resistance
(Ohms)
Nominal Melting
I2t (A2sec)
0.560
0.8401
x
0.110
16.51
x
0.050
17.5
x
1
I t is calculated at 10 msec or less. I2t at 10 times rated current has a typical value of: 24
A2sec (2.0A), 22 A2sec (1.25A), 1.3 A2sec (0.5A).
1 2
t 5ZQJDBMJOEVDUBODFO)VQUP.I[
t 3FTJTUBODFDIBOHFTGPSFWFSZ°C.
t 3FTJTUBODFJTNFBTVSFEBUSBUFEDVSSFOU
Temperature Rerating Curve
2A
1.25A
.500A
Average Time Current Curves
100
TIME IN SECONDS
10
1
0.1
Operating Temperature is -55° C to +125° with proper correction factor applied.
Ambient temperature effects are in addition to the normal derating.
Note:
0.01
1. Derating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
Maximum Temperature Rise
0.001
0.1
Telecom Nano2 Fuse
Opening Time
04611.25
</=82oC (180oF)
046002
</=50oC (122oF)
1
10
CURRENT IN AMPERES
100
1000
TIA-968-A (formerly FCC part 68) Surge Waveforms
(fuse can not open during type B events)
Surge
Metallic A
Longitudinal A
Metallic B
Longitudinal B
Voltage (V)
800
1500
1000
1500
Waveform (μs)
10 x 560
10 x 160
9 x 720
9 x 720
Current (A)
100
200
25
37.5
Repititions
1 ea. polarity
1 ea. polarity
1 ea. polarity
1 ea. polarity
Recommended Fuse
1.25
1.25
1.25
1.25
For the type A events the 0.5 fuse will open, providing non-operational compliance. The 1.25 & 2.0 will
not open, providing for operational compliance with TIA-968-A type A surge events.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
159 Series
104
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/159.html for current information.
Surface Mount Fuses
159 Fuse and Clip Series
GR 1089 Inter-building requirements
GR 1089 1st level lighting surge inter-building
(Equipment under test can not be damaged and must
continue to operate properly)
1
Minimum Minimum Max.
Repetitions
Peak
Peak
Rise/Min.
Each
Voltage
Current
Decay
Polarity
(V)
(A)
(μs)
600
100
10/1000
25
Fuse
Choices
Surge
1
Alternative
1.25, 2.0
2
1000
100
10/360
25
1.25, 2.0
3
1000
100
10/1000
25
1.25, 2.0
4
2500
500
2/10
10
1.25, 2.0
5
1000
25
10/360
5
0.5, 1.25, 2.0
Max.
Minimum
Minimum
Rise/Min.
Peak
Peak
Decay
Voltage
Current (A)
(μs)
(V)
5000
500
2/10
5000
500/8=625
Repetitions
Fuse
Each
Choices
Polarity
1
0.5, 1.25, 2.0
8/10
1
0.5, 1.25, 2.0
The 0.5 fuse will open during these test conditions. The 1.25 F 2.0 will not open thus
providing operational compliance.
If sufficient series resistance is used, then the 0.5 fuse may be used in test conditions 1-4.
GR 1089 AC power fault 2nd level (fuse can open but
must open in a safe and controlled manner)
GR 1089 AC power fault 1st level inter-building (fuse
not allowed to open)
Test
Vrms
1
2
50
100
200,400,
600
1000
Diagram
600
440
600
1000
3
4
5
6
7
8
9
Short
Primary
Fuse
Circuit
Hits Duration
Protector Choices
Current (A)
.33
1
15 min. removed 1.25, 2.0
.17
1
15 min. removed 1.25, 2.0
1
60
1 sec.
removed
1.25, 2.0
1
Diagram
0.5
2.2
3
5
60
60
1
5
1
1
1 sec.
5 sec.
30 sec
2 sec.
1.1 sec.
0.4 sec.
operative
removed
removed
removed
removed
in place
1.25, 2.0
1.25, 2.0
1.25, 2.0
1.25, 2.0
1.25, 2.0
1.25, 2.0
Test
Circuite
1
2
3
4
5
Vrms
120,277
600
600
100-600
Diagram
Short
(A)
25
60
7
2.2
Diagram
Duration
Fuse
15 min.
5 sec.
5 sec.
15 min..
15 min.
0.5, 1.25, 2.0
0.5, 1.25, 2.0
0.5, 1.25, 2.0
0.5, 1.25, 2.0
0.5, 1.25, 2.0
159 Series
Surge
GR 1089 2nd level lightning surge telecom port
(Equipment under test shall not become a fire,
fragmentation, or electrical safety hazard)
Fuse must open before wiring simulator fuse (MDL 2.0).
UL60950 Requirements
UL 60950 (EN 60950, formerly UL 1950) Power Cross Test
(L=Longitudinal, M=Metallic)
Test
Number
L1
L2
L3
L4
L5
M1
M2
M3
M4
Voltage (V) Current (A)
600
600
600
200
120
600
600
600
600
40
7
2.2
2.2
25
40
7
2.2
2.2
Time
1.5 sec.
5 sec.
30 min.
30 min.
30 min.
1.5 sec.
5 sec.
30 min.
30 min.
UL 60950 (EN 60950, formerly UL 1950) Impulse Test
and Steady-State Electric Strength Test
Fuse
Choices
0.5, 1.25, 2.0
0.5, 1.25, 2.0
0.5, 1.25, 2.0
0.5, 1.25, 2.0
0.5, 1.25, 2.0
0.5, 1.25, 2.0
0.5, 1.25, 2.0
0.5, 1.25, 2.0
0.5, 1.25, 2.0
Test
Voltage
(V)
Current
(A)
Waveform
Repetitions
Fuse
Choices
For
handheld
units
2500
62.5
10 x
700ms
+ 10
w/60
sec. rest
0.5,
1.25,
2.0
Non
handheld
1500
37.5
10 x
700ms
+ 10
w/60
sec. rest
0.5,
1.25,
2.0
Impulse
Steady-State
Selection of test number depends on current limiting F fire enclosure/spacing of end product
t "8(MJOFDPSESFNPWFT-.UFTUSFRVJSFNFOU
t -DPOEVDUFEPOMZJGQSPEVDUEPFTOPUQBTTTFDUJPO
t -.-.-.DPOEVDUFEJGOPUJOBmSFFODMPTVSF
Fuse must open before the wiring simulator fuse (MDL 2.0).
For
handheld
units
1500
60Hz
0.5,
1.25,
2.0
Non
handheld
1000
60Hz
0.5,
1.25,
2.0
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/159.html for current information.
105
159 Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
Transientology
159 Fuse and
Clip Series
Soldering Parameters
Pre Heat
Pb – Free assembly
150°C
- Temperature Max (Ts(max))
200°C
- Time (Min to Max) (ts)
60 – 120 secs
3°C/second max.
TS(max) to TL - Ramp-up Rate
3°C/second max.
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 90 seconds
TL
TS(max)
tL
Ramp-down
Preheat
TS(min)
tS
25
Peak Temperature (TP)
250
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
6°C/second max.
Time 25°C to peak Temperature (TP)
8 minutes max.
Do not exceed
260°C
+0/-5
Critical Zone
TL to TP
Ramp-up
- Temperature Min (Ts(min))
Average ramp up rate (Liquidus Temp
(TL) to peak
Reflow
tP
TP
Temperature
Reflow Condition
time to peak temperature
(t 25ºC to peak)
Time
°C
Part Numbering System
0159 1.25 M R
SERIES
AMP Code
Refer to Electrical
Characteristics table
Product Characteristics
Example:
0.5 amp product
is 0159 .500 MR
(1.25 amp shown)
QUANTITY Code
M = 1000 pcs
Materials
Fuse Body: Ceramic
Fuse Caps/Terminals: Silver-plated brass
Clip Base: Gold plated
Clip Terminals: Nickel plated
Product Marking
Brand Logo, Current Rating, 'T'
Insulation Resistance
(after opening)
MIL-STD-202, Method 302, Test
condition A (10,000 ohms, minimum)
Operating
Temperature
-55°C to 125°C with proper derating
Humidity Test
85°C/ 85% RH, 1000 Hours
Solderability
MIL-STD-202, Method 208/IPC EIA
J-STD002A, Test Condition A)
Resistance to
Solvents
MIL-STD-202, Method 215 (3 solvent
types)
Thermal Shock
MIL-STD-202, Method 107G, Test
Condition B3 95 cycles -65°C to +125°C)
Mechanical Shock
MIL-STD-202, Method 213, Test
Condition I (100G’s peak for 6 millisec.)
Vibration
MIL-STD-202, Method 201, (10-55 Hz)
Moisture Resistance
MIL-STD-202, Methold 106, High
Humidity (90-98% RH), Heat (65°C)
Salt Spray/
Atmosphere
MIL-STD-202F, Method 101, Test
Condition B (48 hrs.)
Terminal Attachment
MIL-STD-202, Method 211, Test
Condition A, 5 lbs applied to end caps
PACKAGING Code
R = Tape and Reel
Dimensions
10.90 [0.429]
10.10 [0.398]
1.25 A
T
3.50 [0.138]
3.12 [0.123]
LF
4.80 [0.189]
3.12
[0.123]
1.70
[0.067]
3.00
[0.118]
4.80 [0.189]
4.00 [0.157]
4.80
[0.189]
4.90 [0.193]
"A"
.004
"B"
Recommended Pad Layout
4.40
[0.173]
4.30
[0.169]
3.88
[0.153]
13.00
[0.512]
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity & Packaging Code
24mm Tape and Reel
EIA RS-481-2 (IEC 286, part 3)
1000
MR
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
159 Series
106
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/159.html for current information.
Surface Mount Fuses
PICO® SMF Fuse > 459 Series
459 Series PICO®
Very Fast Acting Surface Mount Fuse
Description
The 459 Series Very Fast-Acting SMF is based on Littelfuse
PICO® fuse technology, though offered in a surface mount
package.
This series of devices meets the requirements of the
RoHS directive.
459 Series
Features
t7FSZ'BTU"DUJOH
t8JEF$VSSFOUSBUJOHSBOHFN"UP"
t8JEFPQFSBUJOHUFNQFSBUVSFSBOHF
Agency Approvals
t-PXUFNQFSBUVSFEFSBUJOH
AGENCY
AGENCY FILE NUMBER
AMPERE RANGE
E10480
1/16A - 5A
LR29862
1/16A - 5A
t3P)4$PNQMJBOU
Applications
t 8JSFMFTTCBTFTUBUJPO
t /FUXPSLFRVJQNFOU
Electrical Characteristics for Series
% of Ampere
Rating
Opening Time
100%
4 hours, Minimum
200%
1 second, Maximum
300%
0.1 second, Maximum
t 5FMFDPNFRVJQNFOU
Electrical Specifications by Item
Ampere
Rating
(A)
Amp
Code
0.062
.062
Max
Voltage
Rating
(V)
125
0.125
.125
125
0.250
.250
125
Interrupting
Rating
Agency Approvals
Nominal Cold
Resistance (Ohms)
Nominal Melting
I2t (A2sec)
7.0000
0.000075
x
1.7000
0.00163
x
x
0.6650
0.0106
x
x
x
0.375
.375
125
0.3950
0.0254
x
x
0.500
.500
125
0.2800
0.0546
x
x
0.750
.750
125
1.00
001.
125
1.50
01.5
125
2.00
002.
125
50 amperes
@125 VAC.
300 amperes
@125 VDC
0.1750
0.155
x
x
0.1250
0.281
x
x
0.0800
0.650
x
x
0.0468
0.421
x
x
2.50
02.5
125
0.0350
0.721
x
x
3.00
003.
125
0.0290
1.23
x
x
3.50
03.5
125
0.0240
1.65
x
x
4.00
004.
125
0.0200
2.35
x
x
5.00
005.
125
0.0155
3.90
x
x
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/459.html for current information.
107
Revised: Jan 12, 2009
459 Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
PICO® SMF FuseTransientology
> 459 Series
1/4A
3/8A
1/2A
3/4A
1A
1 1/2A
2A
2 1/2A
3A
3 1/2A
4A
5A
1/8A
Average Time Current Curves
1/16A
Temperature Rerating Curve
100
TIME IN SECONDS
10
1
0.1
Note:
1. Derating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
0.01
0.001
0.05 0.1
1
10
CURRENT IN AMPERES
100
Soldering Parameters
Wave Solder
260°C, 10 seconds max.
Reflow Solder
260°C, 30 seconds max.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
459 Series
108
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/459.html for current information.
Surface Mount Fuses
PICO® SMF Fuse > 459 Series
Materials
Body: Molded Thermoplastic
Terminations: 100% Tin Plated Copper
(459 Series)
Operating Temperature
–55OC to 125OC
Solderability
MIL-STD-202, Method 208
Shock
MIL-STD-202, Method 213, Test
Condition I
(100 G’s peak for 6 milliseconds)
Product Marking
Body: Brand Logo, Current Rating, Voltage
Rating, Series Code, Date Code, Agency
Approved Logo
Vibration
MIL-STD-202, Method 201 (10–55
Hz, .06 in. total excursion)
Moisture
Sensitivity Level
Level 1 J-STD - 020C
Salt Spray
MIL-STD-202, Method 101, Test
Condition B (48 hrs.)
Insulation Resistance
(After Opening)
MIL-STD-202, Method 302, (10,000
ohms minimum at 100 volts)
Thermal Shock
MIL-STD-202, Method 107,
Test Condition B (–65 to 125°C)
Moisture Resistance
MIL-STD-202, Method 106, High
Humidity (90-98 RH), Heat (65°)
Part Numbering System
Dimensions
459 Series
Product Characteristics
0459 .500 UR
5A
1 25 V
LF
®
45 9
®
4.32
(.170")
B3
7.24(.285")
REF.
3.05
(.120")
SERIES
8.26
(.325")
2.03
(.080")
1.65
(.065")
AMP Code
2.97
(.117")
Refer to Electrical
characteristics table
QUANTITY Code
4.95
(.195")
UR = 500 pcs
RECOMMENDED
PAD LAYOUT
1.30(.051")
REF.
PACKAGING Code
R = Tape and Reel
Example:
0.62 Amp product is
0459 .062 UR (.5 Amp
product shown above).
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
12mm Tape and Reel
EIA RS-481-1 (IEC 286, part 3)
500
UR
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/459.html for current information.
109
459 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
110
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Surface Mount Fuses
PICO® SMF Fuse > 460 Series
460 Series PICO® Slo-Blo Surface Mount Fuse
PS
E
Description
The 460 Series Slow-Blow SMF is based on Littelfuse
PICO® fuse through hole technology, though offered in a
surface mount package.
This series of devices are meets the requirements of the
RoHS directive.
460 Series
Features
t 4MPX#MPX
t )JHI*OSVTIDVSSFOUXJUITUBOEDBQBCJMJUZ
t 8JEFDVSSFOUSBUJOHSBOHFN"UP"
Agency Approvals
AGENCY
PS
E
AGENCY FILE NUMBER
AMPERE RANGE
E10480
0.375A - 5A
LR29862
0.375A - 5A
NBK181103-E10480
1A - 5A
t 8JEFPQFSBUJOHUFNQFSBUVSFSBOHF
t 3P)4DPNQMJBOU
Applications
t 8JSFMFTTCBTFTUBUJPO
t /FUXPSLFRVJQNFOU
t 5FMFDPNFRVJQNFOU
Electrical Characteristics for Series
% of Ampere
Rating
Opening Time
100%
4 hours, Minimum
200%
1 second, Min.; 120 seconds, Max.
300%
0.2 second, Min.; 3 seconds, Max.
800%
0.02 second, Min.; 0.1 second, Max.
Electrical Specifications by Item
0.375
.375
Max
Voltage
Rating
(V)
125
0.500
.500
125
0.750
.750
1.00
001.
Ampere
Rating
(A)
Amp
Code
Interrupting
Rating
Nominal Cold
Resistance
(Ohms)
Nominal Melting
I2t (A2sec)
Agency Approvals
PS
E
1.7400
0.085
x
x
1.1900
0.210
x
x
125
0.4970
0.760
x
x
125
0.2800
2.01
x
x
1.50
01.5
125
2.00
002.
125
2.50
02.5
125
3.00
003.
125
3.50
03.5
125
4.00
004.
5.00
005.
50 amperes
@125 VAC.
x
0.1160
3.94
x
x
x
0.0710
7.60
x
x
x
0.0520
13.0
x
x
x
0.0380
21.0
x
x
x
0.0240
26.8
x
x
x
125
0.0194
35.0
x
x
x
125
0.0133
54.8
x
x
x
50 amperes
@125 VDC
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/460.html for current information.
111
Revised: Jan 21, 2009
460 Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
PICO® SMF FuseTransientology
> 460 Series
Average Time Current Curves
1000
.375A
.500A
.750A
1.0A
1.5A
2.0A
2.5A
3.0A
3.5A
4.0A
5.0A
Temperature Rerating Curve
100
TIME IN SECONDS
10
Note:
1
0.1
1. Derating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
0.01
0.05 0.1
1
10
100
CURRENT IN AMPERES
1000
Soldering Parameters
Wave Solder
260°C, 3 seconds max.
Reflow Solder
230°C, 30 seconds max.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
460 Series
112
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/460.html for current information.
Surface Mount Fuses
PICO® SMF Fuse > 460 Series
Materials
Body: Molded Thermoplastic
Terminations: 100% Tin Plated Copper
(460 Series)
Operating Temperature
–55°C to 125°C
Solderability
MIL-STD-202, Method 208.
Shock
MIL-STD-202, Method 213, Test
Condition I
(100 G’s peak for 6 milliseconds)
Product Marking
Body: Brand Logo, Current Rating, Voltage
Rating, Series Code, Date Code, Agency
Approved Logo
Vibration
MIL-STD-202, Method 201 (10–55
Hz, .06 in. total excursion)
Moisture
Sensitivity Level
Level 1 J-STD - 020C
Salt Spray
MIL-STD-202, Method 101, Test
Condition B (48 hrs.)
Insulation Resistance
(After Opening)
MIL-STD-202, Method 302, (10,000
ohms minimum at 100 volts)
Thermal Shock
MIL-STD-202, Method 107,
Test Condition B (–65°C to 125°C)
Moisture Resistance
MIL-STD-202, Method 106, High
Humidity (90-98 RH), Heat (65°C)
Part Numbering System
Dimensions
5A
1 25 V
LF
®
46 0
®
460 Series
Product Characteristics
0460 .500 UR
4.32
(.170")
B3
7.24(.285")
REF.
3.05
(.120")
SERIES
8.26
(.325")
2.03
(.080")
1.65
(.065")
AMP CODE
Refer to Electrical
Characteristics table
2.97
(.117")
QUANTITY CODE
4.95
(.195")
UR = 500 pcs
RECOMMENDED
PAD LAYOUT
1.30(.051")
REF.
PACKAGING CODE
R = Tape and Reel
Example:
1 Amp product is
0460 .001 UR (.5 Amp
product shown above).
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
12mm Tape and Reel
EIA RS-481-1 (IEC 286, part 3)
500
UR
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/460.html for current information.
113
460 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
114
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Surface Mount Fuses
FLAT-PAK® Fast-Acting Fuse > 202 Series
202 Series Fuse
Description
202 Series
Fast-Acting and Slo-Blo® Fuse versions of the Flat-Pak®
Fuse designs are available. Both designs are available
in either a gull-wing surface mount package or a DIP
configuration for through-hole mounting. These fuse
designs feature a 250 VAC rating in a low profile,
rectangular package.
Agency Approvals
AGENCY
AGENCY FILE
NUMBER
AMPERE RANGE
E10480
1/16mA - 5A
LR29862
1/16mA - 5A
Electrical Characteristics for Series
% of Ampere
Rating
Opening Time
100%
4 hours, Minimum
200%
2 seconds, Maximum
Electrical Specifications by Item
Ampere
Rating
(A)
Amp Code
0.062
.062
0.125
.125
Max
Voltage Rating
(V)
Agency Approvals
Nominal Cold
Resistance
(Ohms)
Nominal
Melting
I2t (A2sec)
250
7.9000
0.000220
x
x
250
2.4500
0.00180
x
x
Interrupting
Rating
0.250
.250
250
0.8800
0.0147
x
x
0.500
.500
250
0.2980
0.0363
x
x
0.750
.750
250
0.1660
0.0980
x
x
1.00
001.
250
0.1190
0.192
x
x
x
50 amperes
@250 VAC
1.50
01.5
250
0.0701
0.540
x
2.00
002.
250
0.0469
1.07
x
x
2.50
02.5
250
0.0455
1.76
x
x
3.00
003.
250
0.0327
1.71
x
x
4.00
004.
250
0.0244
3.00
x
x
5.00
005.
250
0.0174
4.68
x
x
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/202.html for current information.
115
Revised: Mar 17, 2009
202 Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
FLAT-PAK® Fast-Acting FuseTransientology
> 202 Series
1/2A
3/4A
1A
1 1/2A
2A
2 1/2A
3A
4A
5A
1/4A
1/8A
Average Time Current Curves
1/16A
Temperature Rerating Curve
100
TIME IN SECONDS
10
1
0.1
Note:
0.01
1. Derating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
0.001
0.05 0.1
1
10
100
CURRENT IN AMPERES
1000
Soldering Parameters
Wave Soldering
260°C, 3 seconds max.
Reflow Soldering
215°C, 30 seconds max.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
202 Series
116
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/202.html for current information.
Surface Mount Fuses
FLAT-PAK® Fast-Acting Fuse > 202 Series
Product Characteristics
Materials
Body: Thermoplastic
Terminations: Tin/Lead Plated Copper
Cleaning
Board washable in most common
solvents.
Solderability
MIL-STD-202, Method 208.
Operating Temperature
–55OC to 125OC
Dimensions
Part Numbering System
202GFLAT- PAK
202 FLAT- PAK
LF
F 2A
250 V
9.45
(.372")
F 2A
250 V
Surface Mount Fuses:
9.45
(.372")
6.35
(.250")
4.19
(.165")
0.08 (.003")
1.40 (.055")
.135"
10.16
(.400")
0.53
(.021")
0.30 (.012")
0202 002. HXG
6.35
(.250")
4.19
(.165")
6o
Through Hole Fuses:
PAT 4563666
PAT 4563666
1.52
(.060")
SMF Configuration
("Gull Wing" Surface Mount)
DIP Configuration
(Thru-Hole) Mounting
Series
Amp Code
Amp Code
Quantity Code
HXG = 100
URG = 500
17.12 (.674)
4.06 (.160)
2.79 (.110)
Series
Refer to Amp Code column of
Electrical Characteristics Table
15.24 (.600")
0202 002. H
Refer to Amp Code column of
Electrical Characteristics Table
Quantity Code
202 Series
LF
H = 100
11.53 (.454)
Recommended Pad Layout
Packaging
Packaging Specification
Quantity
Quantity &
Packaging Code
Bulk
–
100
HXG
24mm Tape and Reel
EIA RS-481-2 (IEC 286, part 3)
500
URG
–
100
H
Packaging Option
Surface Mount Fuses
Through Hole Fuses
Antistatic Magazine
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/202.html for current information.
117
202 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
118
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Surface Mount Fuses
FLAT-PAK® Slo-Blo® Fuse > 203 Series
203 Series Fuse
Description
203 Series
Fast-Acting and Slo-Blo® Fuse versions of the Flat-Pak Fuse
designs are available. Both designs are available in either a
gull-wing surface mount package or a DIP configuration for
through-hole mounting. These fuse designs feature a 250
VAC rating in a low profile, rectangular package.
Agency Approvals
AGENCY
AGENCY FILE
NUMBER
AMPERE RANGE
E10480
1/4mA - 5A
LR29862
1/4mA - 5A
Electrical Characteristics for Series
% of Ampere
Rating
Opening Time
100%
4 hours, Minimum
200%
1 second, Min; 30 seconds Max.
Electrical Specifications by Item
Ampere
Rating
(A)
Amp Code
Max
Voltage
Rating
(V)
0.25
.250
0.50
0.75
1.00
Agency Approvals
Nominal Cold
Resistance
(Ohms)
Nominal Melting
I2t (A2sec)
250
1.36
0.0126
x
x
.500
250
0.433
0.112
x
x
.750
250
0.158
0.327
x
x
001.
250
0.0755
0.328
x
x
0.0390
0.850
x
x
0.0345
1.70
x
x
Interrupting
Rating
1.50
01.5
250
2.00
002.
250
2.50
02.5
250
0.0237
2.87
x
x
3.00
003.
250
0.0197
4.40
x
x
50 amperes
@250 VAC
4.00
004.
250
0.0148
8.75
x
x
5.00
005.
250
0.0124
14.7
x
x
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/203.html for current information.
119
Revised: Mar 17, 2009
203 Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
FLAT-PAK® Slo-Blo® FuseTransientology
> 203 Series
1/2A
3/4A
1A
1 1/2A
2A
2 1/2A
3A
4A
5A
Average Time Current Curves
1/4A
Temperature Rerating Curve
100
TIME IN SECONDS
10
1
.1
Note:
0.01
1. Derating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
0.001
0.05 0.1
1
10
100
CURRENT IN AMPERES
1000
Soldering Parameters
Wave Soldering
260°C, 3 seconds max.
Reflow Soldering
215°C, 30 seconds max.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
203 Series
120
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/203.html for current information.
Surface Mount Fuses
FLAT-PAK® Slo-Blo® Fuse > 203 Series
Product Characteristics
Materials
Body: Thermoplastic
Terminations: Tin/Lead Plated Copper
Cleaning
Board washable in most common
solvents
Solderability
MIL-STD-202, Method 208
Operating Temperature
–55OC to 125OC
Part Numbering System
Dimensions
202GFLAT- PAK
202 FLAT- PAK
LF
F 2A
250 V
9.45
(.372")
6.35
(.250")
4.19
(.165")
0.08 (.003")
1.40 (.055")
.135"
10.16
(.400")
0.53
(.021")
0.30 (.012")
0203 002. HXG
6.35
(.250")
4.19
(.165")
6o
Through Hole Fuses:
PAT 4563666
PAT 4563666
9.45
(.372")
Surface Mount Fuses:
F 2A
250 V
1.52
(.060")
Series
Amp Code
Amp Code
Quantity Code
SMF Configuration
("Gull Wing" Surface Mount)
DIP Configuration
(Thru-Hole) Mounting
Series
Refer to Amp Code column of
Electrical Characteristics Table
15.24 (.600")
HXG = 100
URG = 500
17.12 (.674)
0203 002. H
Refer to Amp Code column of
Electrical Characteristics Table
Quantity Code
203 Series
LF
H = 100
4.06 (.160)
2.79 (.110)
11.53 (.454)
Recommended Pad Layout
Packaging
Packaging Specification
Quantity
Quantity &
Packaging Code
Bulk
–
100
HXG
24mm Tape and Reel
EIA RS-481-2 (IEC 286, part 3)
500
URG
–
100
H
Packaging Option
Surface Mount Fuses
Through Hole Fuses
Antistatic Magazine
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/203.html for current information.
121
203 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
122
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Surface Mount Fuses
EBF Fuse Fast-Acting > 446/447 Series
446/447 Series Fuse
Description
446 Series
(surface mount leads)
447 Series
This series of devices are 100% lead-free and meets the
requirements of the RoHS directive.
(thru-hole leads)
Features
t 3P)4DPNQMJBOUBOE
100% lead-free
Agency Approvals
AGENCY
AGENCY FILE
NUMBER
AMPERE RANGE
E10480
2A - 10A
LR29862
2A - 10A
t *EFBMGPSVTFJO
electronic lighting
ballast, power supply
and power inverter
applications.
t 3BUFEGPSVTFJO
250, 277 and 350 VAC
circuits.
t #BTFEPOUIFQSPWFO
reliability of the
automotive MINI®
Fuse; available from 2
through 10 amperes.
446/447 Series
The 446/447 series are circuit-board mountable, flat profile,
fast-acting fuses designed for protection of electronic
ballasts and power inverter applications. The 446 series is
designed with leads for surface mount applications, and
the 447 series is designed with leads for through-hole
applications.
Electrical Characteristics for Series
% of Ampere
Rating
Opening Time
100%
4 hours, Minimum
200%
0.15 sec. Min.; 5 sec. Max.
Electrical Specifications by Item
Ampere
Rating
(A)
Amp Code
Max
Voltage
Rating
(V)
Nominal Cold
Resistance
(Ohms)
Interrupting
Rating
Nominal Melting
I2t (A2sec)
Agency Approvals
2.00
002.
350
0.0560
2.8
x
x
3.00
003.
350
0.0340
9.4
x
x
4.00
004.
350
5.00
005.
350
7.50
07.5
350
10.0
010.
350
100 amperes @350
VAC, 50 amperes
@125 VDC and 450
amperes @60VDC
0.0240
17
x
x
0.0180
25
x
x
0.0110
68
x
x
0.0073
93
x
x
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/446.html
or /447.html for current information.
123
Revised: Jan 12, 2009
446P/447P Series
Mount
Fuses
IntroductionSurface
to Circuit
Protection
Transientology
EBF Fuse Fast-Acting > 446/447
Series
Average Time Current Curves
2A
3A
4A
5A
7 1/2A
10A
Temperature Rerating Curve
1000
TIME IN SECONDS
100
10
1
Note:
0.1
1. Derating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
0.01
0.1
1
10
100
CURRENT IN AMPERES
1000
Soldering Parameters
446 Series:
Reflow Solder — 235°C, 5 seconds maximum.
No-clean process recommended.
Wave Solder — Not recommended.
Non-plated terminal surfaces may not meet
MIL-STD-202, Method 208.
447 Series:
Contact Littelfuse for soldering parameters.
Inside terminal face of each lead is non-plated zinc. Non-plated zinc terminal faces
may not meet MIL-STD-202, method 208. To ensure that the fuse is acceptable
for the application, appropriate application testing should be performed.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
446P/447P Series
124
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/446.html
or /447.html for current information.
Surface Mount Fuses
EBF Fuse Fast-Acting > 446/447 Series
Product Characteristics
Materials
Body: Plastic Body – Terminations: Tin-load
(95/5) plated Zn, Ni barrier
Cleaning
No-cleaning process recommended
Operating Temperature
Dimensions
Part Numbering System
PATA
60
46
02
350V
Recommended
Pad Layout
447 Mounting
Holes
1.44
(.057")
10.92
(.430")
1.52
(.060")
0446 002. ZRP
1.27
(.050") Dia
4.03
(.159")
3.81
(.150")
5.91
(.233")
8.81
(.347")
10.11
(.398")
8.76
(.345")
1.50 (.059") MAX
3.2
5.59 (.126")
(.220")
(.032")
0.81
(.295")
7.49
0447 002. YXP
Series
Series
Amp Code
Amp Code
Quantity Code
Quantity Code
ZRP = 800
YXP = 4000
446/447 Series
Reference Dimensions
(Inches)
LF
–40OC to 125OC
3.2 (.126")
0.81
(.032")
For 447 dimensions, please contact Littelfuse for specifications.
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
EIA RS-481-1 (IEC 286, part 3)
800
ZRP
–
4000
YXP
446 Series
24mm Tape and Reel
447 Series
Bulk Pack
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/446.html
or /447.html for current information.
125
446P/447P Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
126
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Radial Lead Fuses
MICRO™ > Very Fast-Acting > 262/268/269 Series
262/268/269 Series,
QPL
MICRO™ Very Fast-Acting Fuse (High-Reliability)
Description
The 262/268/269 Series are high–reliability micro
fuses, with a 125V rating, very fast-acting type with
high breaking capacity. This series is listed under the
Department of Defense Quality Product List.
Features
t "WBJMBCMFJOQMVHJOBOE
radial leaded
t.JMJUBSZHSBEFBWBJMBCMF
t "WBJMBCMFGSPNWFSZMPX
ampere of 2mA to 5A
Applications
Agency Approvals
Agency File Number
Ampere Range
E10480
2mA - 5A
LR 29862
2mA - 5A
FM07A
2mA - 5A
QPL
Electrical Characteristics
% of Ampere
Rating
100%
200%
Ampere Rating
Opening Time
1/500–15
4 Hours, Min.
1/500–3/10
5 Seconds, Max.
4/10-5
2 Seconds, Max.
262/268/269
Agency
Protection of electrical, electronic, and communication
equipment having printed circuit boards (PCBs) usable
in direct current (DC) and alternating current (AC) (up
to 400 hertz (Hz)) circuits capable of withstanding and
functioning in extreme conditions found in Spacecraft or
Military applications as described in MIL-PRF-23419.
Electrical Characteristics
Ampere
Rating
(A)
Amp Code
.002
.005
.010
.015
.031
.050
.062
.100
.125
.200
.250
.300
.400
.500
.600
.700
.750
.800
1.00
01.5
2.00
3.00
4.00
5.00
.002
.005
.010
.015
.031
.050
.062
.100
.125
.200
.250
.300
.400
.500
.600
.700
.750
.800
001.
01.5
002.
003.
004.
005.
Max
Voltage
Rating
(V)
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
Interrupting
Rating
Nominal Cold
Resistance
(Ohms)
10,000 amperes at
125 VAC/VDC
2000
280
94.0
44.0
16.45
3.20
2.25
1.17
1.0
2.30
1.75
1.25
0.227
0.167
0.140
0.114
0.104
0.094
0.100
0.063
0.046
0.034
0.019
0.018
Agency Approvals
QPL
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Please contact Littelfuse for Average Time Current Curve.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/262.html,
/268.html or /269.html for current information.
127
Revised: Jan 12, 2009
262/268/269 Series
Fuses
Introduction toRadial
CircuitLead
Protection
Transientology
MICRO™ > Very Fast-Acting > 262/268/269
Series
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
Preheat:
200
(Depends on Flux Activation Temperature)
180
160
140
120
80
60
40
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
100
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
Recommended Hand-Solder Parameters:
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Time (Seconds)
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Cooling Time
Preheat Time
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Temperature Rerating Curve
Please contact Littelfuse for average time current curve.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
262/268/269 Series
128
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/262.html,
/268.html or /269.html for current information.
Radial Lead Fuses
MICRO™ > Very Fast-Acting > 262/268/269 Series
Materials
Gold-Plated Copper Leads, Type II
(Fuse cap is also Gold-Plated)
Weight
262 and 269 Series .36 Grams;
268 Series .48 Grams
Lead Pull Force
MIL-STD-202, Method 211, Test
Condition A (will withstand a 5 lb.
axial pull test)
AQL (Electrical
Characteristics)
Certified to 1% AQL
Sampling
Per MIL-STD-105, Inspection Level II
Traceability and
Identification Records
Controlled by lot number and
retained on file for a minimum
of three years. Copies of Lot
Certification Test data available when
requested with order
Options
Special screening tests, burn-in, etc.
can be supplied on special order to
meet specific requirements
Product Marking
262 / 268 Series: Brand logo, current
and voltage ratings
269 Series: Brand logo, current and
voltage ratings and agency approval
mark
Dimensions
–55ºC to +125ºC
Shock
(1/500): MIL-STD-202, Method 213,
Test Condition A (50 G’s peak for
11 milliseconds). (1/200–5): MILSTD-202, Method 213, Test Condition
I (100 G’s peak for 6 milliseconds)
Vibration
MIL-STD-202, Method 201 (10–55
Hz); MIL-STD-202, Method 204, Test
Condition C (55–2000 Hz at 10 G’s
Peak)
Salt Spray
MIL-STD-202, Method 101, Test
Condition B
Seal Test
MIL-STD-202, Method 112, Test
Condition A
Insulation Resistance
(After Opening)
MIL-STD-202, Method 302, Test
Condition A (1/2 Megohm minimum)
Thermal Shock
MIL-STD-202, Method 107, Test
Condition B (–65ºC to 125ºC)
Moisture Resistance
MIL-STD-202, Method 106
Fuses to MIL SPEC
262 Series is available in FM07A on
QPL for MIL-PRF-23419/7. To order,
change 262 to 269
Part Numbering System
262 000 Series
7.37 4.32
(.29") (.17")
Operating Temperature
268 000 Series
5.97
(.235")
7.37
(.29")
0262 xxxx V
25.4
(1.0")
262/268/269
Product Characteristics
Series
2.54
(.10")
Amp. Code
Refer to Amp Code column of
Electrical Characteristics Table
2.54 (.10")
Packaging Code
V=5
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
Bulk
N/A
5
V
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/262.html,
/268.html or /269.html for current information.
129
262/268/269 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
130
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Radial Lead Fuses
MICRO™ > Very Fast-Acting > 272/273/274/278/279 Series
272/273/274/278/279 Series,
QPL
MICRO™ Very Fast-Acting Fuse
Description
Developed originally for the U.S. Space Program,
MICRO™ fuse provides reliability in a compact design.
The MICRO™ fuse is available in plug–in or radial lead
styles and a complete range of ampere ratings from
1/500 to 5A to suit a wide variety of design needs.
Features
t Military grade available
t High breaking capacity
t Available from very low
ampere of 2mA to 5A
t Clear cover option to view t Plug-in with short or long
leads option
fuse element status
Agency Approvals
Applications
QPL
Agency File Number
Ampere Range
E10480
2mA - 5A
t Printed circuit boards
and similar equipment
LR 29862
2mA - 5A
Electrical Characteristics
FM02
2mA - 5A
t Electronic components
% of Ampere
Rating
Ampere Rating
Opening Time
100%
1/500–5
4 Hours, Min.
200%
1/500–3/10
5 Seconds, Max.
4/10-5
2 Seconds, Max.
272-4/278-9
Agency
Electrical Characteristics
Ampere
Rating
(A)
.002
.005
.010
.015
.031
.050
.062
.100
.125
.200
.250
.300
.400
.500
.600
.700
.750
.800
1.00
01.5
2.00
3.00
4.00
5.00
Amp Code
(for all
above
series)
.002
.005
.010
.015
.031
.050
.062
.100
.125
.200
.250
.300
.400
.500
.600
.700
.750
.800
001.
01.5
002.
003.
004.
005.
Max
Voltage
Rating
(V)
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
Interrupting
Rating
10,000 amperes at
125 VAC/VDC.
Nominal
Cold
Resistance
(Ohms)
2200
280
80.0
44.0
16.0
3.20
2.32
1.25
1.0
2.30
1.75
1.25
0.227
0.167
0.430
0.324
0.293
0.271
0.0880
0.0578
0.0425
0.0275
0.0202
0.0156
Agency Approvals
Nominal
Melting
I2t (A2 sec)
0.00000000845
0.00000000810
0.000000462
0.00000123
0.00000810
0.0000666
0.000115
0.000385
0.000691
0.00409
0.00640
0.00945
0.0251
0.0716
0.0411
0.0710
0.0900
0.113
0.0648
0.160
0.300
0.759
1.38
2.21
QPL
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/272.html, /273.html, /274.html,
/278.html or /279.html for current information.
131
Revised: Jan 12, 2009
272/273/274/278/279 Series
Fuses
Introduction toRadial
CircuitLead
Protection
Transientology
MICRO™ > Very Fast-Acting > 272/273/274/278/279
Series
1/2 A
3/4 A
1A
1 1/2 A
2A
3A
4A
5A
1/4 A
1/8 A
1/16 A
1/32 A
100
1/100 A
1/64 A
Average Time Current Curves
1/200 A
Temperature Rerating Curve
TIME IN SECONDS
10
1
0.1
0.01
0.001
0.005
1
0.1
CURRENT IN AMPERES
0.01
10
100
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
Preheat:
200
(Depends on Flux Activation Temperature)
180
160
140
120
80
60
40
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
100
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
Recommended Hand-Solder Parameters:
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Time (Seconds)
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Cooling Time
Preheat Time
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
272/273/274/278/279 Series
132
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/272.html, /273.html, /274.html,
/278.html or /279.html for current information.
Radial Lead Fuses
MICRO™ > Very Fast-Acting > 272/273/274/278/279 Series
Dimensions
Product Characteristics
Operating Temperature:
273 and 279: –55ºC to +85ºC;
272 and 278: –55ºC to +125ºC
Fuses to MIL SPEC
273 Series is available in CSA LR
29862. Military QPL type (FM02).
To order, change 273 to 274.
272 000 Series
(Short Lead, Metal Cap)
5.97
(.235")
4.32
(.17")
2.54 (.10")
272 and 278 series cap:
Nickel Plated Brass
273, 274 and 279 series cap:
Mirror polished Polycarbonate
Base: R-4 Ryton
Pins: Tin Plated Copper
Materials
7.30
(.29")
278 000 Series
(Long Lead, Metal Cap)
5.97
(.235")
7.30
(.29")
25.4 (1.0")
2.54 (.10")
Current and voltage ratings stamped
on cap
Product Marking
273 000 and 274 000 Series
(Short Lead, Clear Plastic Cap)
Part Numbering System
6.35
(.25")
0273 xxxx V
8.89
(.35")
4.32
(.17")
2.54 (.10")
Amp. Code
279 000 Series
Refer to Amp Code column of
Electrical Characteristics Table
(Long Lead, Clear Plastic Cap)
6.35
(.25")
Packaging Code
8.89
(.35")
25.4 (1.0")
V=5
H = 100
2.54 (.10")
272-4/278-9
Series
NOTE: Amperage and voltage rating stamped on cap.
Leads are tin plated copper; .025" diameter.
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
Bulk
N/A
5
V
Bulk
N/A
100
H
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/272.html, /273.html, /274.html,
/278.html or /279.html for current information.
133
272/273/274/278/279 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
134
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Radial Lead Fuses
TR3® > Fast-Acting > 303 Series
303 Series,
TR3®, Fast-Acting Fuse
Description
The 303 Series are TR3®, fast-acting type, 125V rated
fuses designed in accordance to UL 248–14.
Features
t 4IPDLTBGFDBTJOH
t %JSFDUTPMEFSBCMFPS
plug-in versions
t )BMPHFOGSFF
t *OUFSOBUJPOBMMZ
approved
Agency Approvals
Agency File Number
Ampere Range
E67006
50mA-5A
051378
50mA-5A
t -PXJOUFSOBMSFTJTUBODF
t 7JCSBUJPOSFTJTUBOU
t -FBEGSFF
t "WBJMBCMFGSPNN"
to 5A
Applications
t #BUUFSZDIBSHFST
t 1PXFSTVQQMJFT
t $POTVNFSFMFDUSPOJDT
t *OEVTUSJBMDPOUSPMMFST
303 Series
Agency
t 3FEVDFE1$#TQBDF
requirements
Electrical Characteristics
% of Ampere
Rating
Opening Time
200
60 Seconds, Maximum
Electrical Characteristics
Amp Code
0050
0063
0080
0100
0125
0160
0200
0250
0315
0400
0500
0630
0800
1100
1125
1160
1200
1250
1315
1400
1500
Rated
Current
Voltage
Rating
50mA
63mA
80mA
100mA
125mA
160mA
200mA
250mA
315mA
400mA
500mA
630mA
800mA
1.00A
1.25A
1.60A
2.00A
2.50A
3.15A
4.00A
5.00A
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
Voltage
Drop
1.0 x IN
max. (mV)
800
780
730
700
650
600
550
500
450
400
380
160
155
150
145
140
130
125
120
110
105
Breaking Capacity
50A / 125VAC
60-60 Hz/cos ϕ - 1
50A / 63 VDC
Power
Dissipation
1.0 x IN
max. (mW)
40
50
60
70
85
100
110
125
145
160
190
100
125
155
185
225
260
315
380
440
525
Melting
Integral
10 x IN
max. (A2s)
0.00007
0.00013
0.0002
0.0004
0.0022
0.0029
0.0042
0.0082
0.015
0.025
0.042
0.015
0.025
0.039
0.059
0.11
0.17
0.23
0.45
1.0
1.5
Approvals
®
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/303.html for current information.
135
Revised: Jan 12, 2009
303 Series
Fuses
Introduction toRadial
CircuitLead
Protection
TR3® > Fast-ActingTransientology
> 303 Series
Temperature Rerating Curve
Average Time Current Curves
TR3 / No. 303
00
0,0
10
140
I-t Characteristics
100
(Min-Max Limit)
UL 248-14
Test value
,00
10
80
0
60
0
1,0
23°C
40
0
PERCENT OF RATING
120
20
-20
0
20
40
60
80
0
-40
10
0
10
Time (sec.)
AMBIENT TEMPERATURE (°C)
1
0.1
1
0.0
01
0.0
1
1.5
2
3
4
5
6
7 8 9 10
15
IFault / I Rated
Contact Littelfuse for individual I-t curves
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
Preheat:
200
(Depends on Flux Activation Temperature)
180
160
140
120
80
60
40
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
100
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
Recommended Hand-Solder Parameters:
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
20
0
10
20
0
Temperature (°C) - Measured on bottom side of board
300
Time (Seconds)
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Cooling Time
Preheat Time
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
303 Series
136
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/303.html for current information.
Radial Lead Fuses
TR3® > Fast-Acting > 303 Series
Product Characteristics
Base/Cap: Black Thermoplastic Base
Polyamide PA 6.6, UL 94V-0
Brass, Nickel-plated Cap
Round Pins: Copper alloy, Tin–plated
Materials
Lead Pull Strength
10 N (EN 60068-2-21)
Solderability
260ºC, ≤ 3s. (Wave)
350ºC, ≤ 1s. (Soldering Iron)
Soldering Heat
Resistance
260ºC, 10s. (IEC 60068-2-20)
350ºC, 3s. (Soldering Iron)
Operating Temperature
-25ºC to +70ºC (consider de-rating)
Climatic Category
-25ºC/+70ºC/21 days
(EN 60068-1..3)
Stock Conditions
+10ºC to +60ºC RH,
≤ 75% yearly average, without dew
Vibration Resistance
24 cycles at 15 min. each
(EN 60068-6)
10 - 60 Hz at 0.75 mm amplitude
60 - 2000 Hz at 10 g acceleration
Part Numbering System
Dimensions
L
max. 8
Ø6
2,54
303 Series
1 +0,1
Ø 0,6
Dimensions (mm)
Holes in PCB
Long Leads (L=18.8 mm)
Short Leads (L=4.3 mm)
Packaging
Packaging Option
303 Series
Tape & Ammopack
Short Leads
Short Leads
Packaging Specification
Quantity
Quantity &
Packaging Code
Reel Size
N/A
N/A
N/A
1,500
200
300
000
013
042
N/A
N/A
N/A
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/303.html for current information.
137
303 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
138
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Radial Lead Fuses
TR5® > Fast-Acting > 370 Series
370 Series,
TR5®, Fast-Acting Fuse
Description
The 370 Series are TR5®,sub-miniature,fast-acting type,
250V rated fuses, designed in accordance to IEC 601273.
Features
t 3FEVDFE1$#TQBDF
requirements
t 4IPDLTBGFDBTJOH
t %JSFDUTPMEFSBCMFPS
plug-in versions
t )BMPHFOGSFF
t *OUFSOBUJPOBMMZ
approved
Agency Approvals
t -PXJOUFSOBMSFTJTUBODF
Agency File Number
Ampere Range
License number:
5007679-1170-0001/82438
100mA - 5A
License number:
5007679-1170-0001/97059
5007679-1170-0009/97069
5007679-1170-0002/82443
40mA
50mA - 80mA
6.3A
Certificate number:
710055
File number:
E67006
t -FBEGSFF
t "WBJMBCMFGSPNN"
to 6.3A
Applications
t #BUUFSZ$IBSHFST
t 1PXFSTVQQMJFT
t $POTVNFS&MFDUSPOJDT
t *OEVTUSJBM$POUSPMMFST
50mA - 6.3A
40mA - 6.3A
JET0381-31007-2003
1A - 5A
2007010207240347
50mA - 5A
370 Series
Agency
t 7JCSBUJPOSFTJTUBOU
Electrical Characteristics
% of Ampere
Rating
Opening Time
150%
1 Hour, Min.
210%
30 Minutes, Max.
275%
10 ms, Min. ; 3 Sec., Max.
400%
3 ms, Min. ; 300 ms, Max.
1000%
20 ms, Max.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/370.html for current information.
139
Revised: May 6, 2009
370 Series
Radial
Lead
Fuses
Lead
Introduction toRadial
Circuit
Protection
TR5® > Fast-ActingTransientology
> 370 Series
Electrical Characteristics
Amp
Code
Rated
Current
Voltage
Rating
0040
0050
0063
0080
0100
0125
0160
0200
0250
0315
0400
0500
0630
0800
1100
1125
1160
1200
1250
1315
1400
1500
1630
40mA
50mA
63mA
80mA
100mA
125mA
160mA
200mA
250mA
315mA
400mA
500mA
630mA
800mA
1.00A
1.25A
1.60A
2.00A
2.50A
3.15A
4.00A
5.00A
6.30A*
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
Breaking Capacity
35 A/ 250VAC1
50-60 Hz cos ϕ = 1.0
40 A / 250 VAC
50 A / 250 VAC
Voltage
Drop
1.0 x IN
max. (mV)
900
320
350
370
600
550
500
465
400
380
120
120
115
120
110
100
100
85
80
90
80
80
70
Power
Dissipation
1.5 x IN
max. (mW)
100
80
100
120
130
172
165
190
250
250
135
155
200
310
310
360
600
500
660
950
920
1000
1200
Melting
Integral
10 x IN
max. (A2s)
0.0002
0.00035
0.0005
0.0014
0.0038
0.0066
0.014
0.03
0.051
0.1
0.025
0.042
0.076
0.12
0.2
0.31
0.53
0.98
1.8
3.1
6.7
12.00
24.00
Agency Approvals
G
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
G
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1 Per UL, approved breaking capacity is 50 A at 250 V.
* Conducting path min. 0.2 mm2
G = Expert Report pending
Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand.
Average Time Current Curves
0.040A
0.050A
0.063A
0.080A
0.100A
0.125A
0.160A
0.200A
0.250A
0.315A
0.400A
0.500A
0.630A
0.800A
1.00A
1.25A
1.60A
2.00A
2.50A
3.15A
4.00A
5.00A
6.30A
Temperature Rerating Curve
140
100000
PERCENT OF RATING
120
100
10000
80
60
23°C
40
1000
TIME IN SECONDS
20
0
-40
-20
0
20
40
60
80
AMBIENT TEMPERATURE (°C)
100
10
1
0.100
0.010
0.001
0.02
0.100
1
10
100
CURRENT IN AMPERES
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
370 Series
140
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/370.html for current information.
Radial Lead Fuses
TR5® > Fast-Acting > 370 Series
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
Lead-Free Recommendation
220
Preheat:
200
(Depends on Flux Activation Temperature)
180
Temperature Minimum:
160
140
120
80
60
40
20
(Typical Industry Recommendation)
100°C
Temperature Maximum:
150°C
Preheat Time:
60-180 Seconds
100
Solder Pot Temperature:
260°C Maximum
Solder Dwell Time:
2-5 Seconds
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
20
Recommended Hand-Solder Parameters:
0
10
Temperature (°C) - Measured on bottom side of board
300
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Time (Seconds)
Cooling Time
Preheat Time
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Materials
Base/Cap: Brown Thermoplastic
Polyamide PA 6.6, UL 94 V-0
Round Pins: Copper, Tin-plated
Lead Pull Strength
10 N (EN 60068-2-21)
Solderability
260ºC, ≤ 3s. (Wave)
350ºC, ≤ 1s. (Soldering Iron)
Soldering Heat
Resistance
260ºC, 10s. (IEC 60068-2-20)
350ºC, 3s. (Soldering Iron)
Operating Temperature
Climatic Category
Stock Conditions
Vibration Resistance
-40ºC to +85ºC (consider de-rating)
-40ºC to +85ºC/21 days
(IEC 60068-1,-2-1,-2-2,-2-78)
+10ºC to +60ºC
RH ≤ 75% yearly average, without
dew, maximum value for 30 days95%
24 cycles at 15 min. each
(EN 60068-2-6)
10 - 60 Hz at 0.75 mm amplitude
60 - 2000 Hz at 10G acceleration
370 Series
Product Characteristics
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/370.html for current information.
141
370 Series
Radial
Lead
Fuses
Lead
Introduction toRadial
Circuit
Protection
TR5® > Fast-ActingTransientology
> 370 Series
Dimensions
Part Numbering System
8.5
Series
Amp Code
0.6
Refer to Amp Code column of
Electrical Characteristics Table
0.5 min
L
max. 8
370 xxxx 0000
Packaging Code
0000 Tape/Ammopack (1,000 pcs.)
0410 Short Leads - Bulk (1,000 pcs.)
1 +0.1
5.08
Holes in PCB
Long Leads (L=18.8mm)
Short Leads (L=4.3mm)
Packaging
Packaging Option
370 Series
Tape & Ammopack
Short Leads
Packaging Specification
Quantity
Quantity &
Packaging Code
Taping Width
N/A
N/A
1,000
1,000
0000
0410
N/A
N/A
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
370 Series
142
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/370.html for current information.
Radial Lead Fuses
TR5® > Time-Lag > 372 Series
372 Series,
TR5®, Time-Lag Fuse
Description
The 372 Series are TR5®, time-Lag type, 250V rated fuses,
that are designed in accordance to IEC 60127-3.
Features
t -PXJOUFSOBMSFTJTUBODF
t 3FEVDFE1$#TQBDF
requirements
t 4IPDLTBGFDBTJOH
t %JSFDUTPMEFSBCMFPS
plug-in versions
t )BMPHFOGSFF
t 7JCSBUJPOSFTJTUBOU
t "WBJMBCMFGSPNN"
to 6.3A
t *OUFSOBUJPOBMMZ
approved
Agency Approvals
Agency File Number
Ampere Range
5007679-1170-0003/82447
50mA - 4A
5007679-1170-0004/82452
5A - 6.3A
JET1896-31007-2002
Applications
t #BUUFSZ$IBSHFST
t 1PXFSTVQQMJFT
t $POTVNFSFMFDUSPOJDT
t *OEVTUSJBM$POUSPMMFST
1A - 5A
Electrical Characteristics
709066
50mA - 6.3A
E67006
40mA - 6.3A
% of Ampere
Rating
Opening Time
50mA - 100mA
125mA - 800mA
1A - 2.5A
3.15A
4A
5A
6.3A
150%
1 Hour, Min.
210%
2 Minutes, Max.
SU05024-7010
SU05024-7011
SU05024-7006
SU05024-7007
SU05024-7008
SU05024-7009
SU05024-7012
372 Series
Agency
t -FBEGSFF
CQC07012021162
2007010207240346
275%
400 ms, Min. ; 10 Sec., Max.
400%
150 ms, Min. ; 3 Sec., Max.
1000%
20 ms, Min. ; 150 ms, Max.
5A - 6.3A
40mA - 4A
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/372.html for current information.
143
Revised: June 3, 2009
372 Series
Fuses
Introduction toRadial
CircuitLead
Protection
TR5® > Time-LagTransientology
> 372 Series
Electrical Characteristics
Amp
Code
Rated
Current
Voltage
Rating
0040
0050
0063
0080
0100
0125
0160
0200
0250
0315
0400
0500
0630
0800
1100
1125
1160
1200
1250
1315
1400
1500
1630
40mA
50mA
63mA
80mA
100mA
125mA
160mA
200mA
250mA
315mA
400mA
500mA
630mA
800mA
1.00A
1.25A
1.60A
2.00A
2.50A
3.15A
4.00A
5.00A
6.30A*
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
Breaking Capacity
35A/250VAC1
50-60 Hz cos ϕ = 1.0
40A / 250 VAC
50A / 250 VAC
Voltage
Drop
1.0 x IN
max. (mV)
900
500
400
370
300
260
200
170
150
140
130
125
120
110
110
95
95
85
80
80
75
80
58
Power
Dissipation
1.5 x IN
max. (mW)
90
70
80
100
110
120
130
140
150
160
170
180
200
220
360
450
450
600
700
1100
1200
1300
1250
Melting
Integral
10 x IN
min. (A2s)
0.009
0.01
0.02
0.023
0.047
0.066
0.14
0.20
0.28
0.36
0.9
1.3
2.5
3.8
5.5
9
14
23
35
60
95
94
105
Agency Approvals
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
G
G
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
CQC
CQC
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1 Per UL, approved breaking capacity is 50 A at 250 V.
* Conducting path min. 0.2 mm2
G = Expert Report
Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand.
PERCENT OF RATING
120
0.125A
0.160A
0.200A
0.250A
0.315A
0.400A
0.500A
0.630A
0.800A
1.00A
1.25A
1.60A
2.00A
2.50A
3.15A
4.00A
5.00A
6.30A
140
0.063A
0.080A
0.100A
Average Time Current Curves
0.040A
0.050A
Temperature Rerating Curve
100000
100
80
10000
60
40
23°C
1000
20
0
-20
0
20
40
60
80
TIME IN SECONDS
-40
AMBIENT TEMPERATURE (°C)
100
10
1
0.100
0.010
0.001
0.02
0.100
1
10
100
CURRENT IN AMPERES
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
372 Series
144
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/372.html for current information.
Radial Lead Fuses
TR5® > Time-Lag > 372 Series
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
Lead-Free Recommendation
200
Preheat:
180
(Depends on Flux Activation Temperature)
160
140
120
100
80
60
40
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Recommended Hand-Solder Parameters:
Time (Seconds)
Cooling Time
Preheat Time
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Materials
Base/Cap: Brown Thermoplastic
Polyamide PA 6.6, UL 94 V-0
Round Pins: Copper, Tin-plated
Lead Pull Strength
10 N (EN 60068-2-21)
Solderability
260ºC, ≤ 3s. (Wave)
350ºC, ≤ 1s. (Soldering Iron)
Soldering Heat
Resistance
260ºC, 10s. (IEC 60068-2-20)
350ºC, 3s. (Soldering Iron)
Operating Temperature
Climatic Category
Stock Conditions
Vibration Resistance
-40ºC to +85ºC (consider de-rating)
-40ºC/+85ºC/21 days
(IEC 60068-1,-2-1,-2-2,-2-78)
+10ºC to +60ºC
RH ≤ 75% yearly average, without
dew, maximum value for 30 days95%
24 cycles at 15 min. each
(EN 60068-2-6)
10 - 60 Hz at 0.75 mm amplitude
60 - 2000 Hz at 10G’s acceleration
372 Series
Product Characteristics
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/372.html for current information.
145
372 Series
Fuses
Introduction toRadial
CircuitLead
Protection
TR5® > Time-LagTransientology
> 372 Series
Dimensions
Part Numbering System
8.5
max. 8
372 xxxx 0001
Series
0.5 min
L
Amp Code
0.6
Refer to Amp Code column of
Electrical Characteristics Table
1 +0.1
Packaging Code
5.08
0001 Tape/Ammopack (1,000 pcs.)
0411 Short Leads - Bulk (1,000 pcs.)
0431 Short Leads - Bulk (200 pcs.)
0511 3.3 mm Leads - Bulk (1000 pcs.)
Long Leads (L=18.8mm)
Short Leads (L=4.3mm)
Packaging
Packaging Option
372 Series
Tape & Ammopack
Short Leads
Short Leads
3.3mm Leads
Packaging Specification
Quantity
Quantity &
Packaging Code
Taping Width
N/A
N/A
N/A
N/A
1,000
1,000
200
1,000
0001
0411
0431
0511
N/A
N/A
N/A
N/A
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
372 Series
146
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/372.html for current information.
Radial Lead Fuses
TR5® > Fast-Acting > 373 Series
373 Series,
TR5®, Fast-Acting Fuse
Description
The TR5® 373 Series are fast–acting 250V rated fuses, that
are designed in accordance to UL 248 –14.
Features
t 4IPDLTBGFDBTJOH
t %JSFDUTPMEFSBCMFPS
plug-in versions
t )BMPHFOGSFF
t 7JCSBUJPOSFTJTUBOU
t -FBEGSFF
t *OUFSOBUJPOBMMZ
approved
Agency Approvals
Agency File Number
File number:
E 67006
Certification:
51378
File number:
E67006
t "WBJMBCMFGSPNN"
to 10A
t -PXJOUFSOBM
resistance
Ampere Range
50mA - 6.3A
50mA - 6.3A
Applications
8A - 10A
t #BUUFSZ$IBSHFST
t 1PXFSTVQQMJFT
t $POTVNFS&MFDUSPOJDT
t *OEVTUSJBM$POUSPMMFST
Electrical Characteristics
% of Ampere
Rating
200%
Ampere Rating
Opening Time
50mA - 6.3A
5 Seconds, Max.
8A - 10A
60 Seconds, Max.
373 Series
Agency
t 3FEVDFE1$#TQBDF
requirements
Electrical Characteristics
Amp
Code
Rated
Current
Voltage
Rating
0050
0063
0080
0100
0125
0160
0200
0250
0315
0400
0500
0630
0800
1100
1125
1160
1200
1250
1315
1400
1500
1630
1800
2100
50mA
63mA
80mA
100mA
125mA
160mA
200mA
250mA
315mA
400mA
500mA
630mA
800mA
1.00A
1.25A
1.60A
2.00A
2.50A
3.15A
4.00A
5.00A
6.30A
8.00A1
10.00A1
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
Breaking Capacity
Voltage
Drop
1.0 x IN
max. (mV)
Power
Dissipation
1.0 x IN
max. (mW)
1400
1300
1200
1100
1000
950
850
750
650
230
220
210
200
190
180
170
160
150
140
130
120
115
120
110
70
85
100
110
125
155
170
190
205
95
110
135
160
190
225
275
320
375
445
520
630
1000
1600
2000
50A / 250 VAC
50-60 Hz
cos ϕ = 1.0
Melting
Integral
10 x IN
max. (A2s)
0.0001
0.00023
0.00037
0.0013
0.0019
0.004
0.0065
0.014
0.032
0.016
0.025
0.045
0.069
0.125
0.2
0.38
0.63
1.2
1.9
3.5
6.2
9.1
30
55
Agency Approvals
®
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1. Conducting path cross-section minimum ≥ 0.2mm2
Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/373.html for current information.
147
Revised: May 6, 2009
373 Series
Fuses
Introduction toRadial
CircuitLead
Protection
Transientology
TR5® > Fast-Acting
> 373 Series
Average Time Current Curves
0.050A
0.063A
0.080A
0.100A
0.125A
0.160A
0.200A
0.250A
0.315A
0.400A
0.500A
0.630A
0.800A
1.00A
1.25A
1.60A
2.00A
2.50A
3.15A
4.00A
5.00A
6.30A
8.00A
10.00A
Temperature Rerating Curve
140
100000
PERCENT OF RATING
120
100
10000
80
60
1000
23°C
40
TIME IN SECONDS
20
0
-40
-20
0
20
40
60
80
AMBIENT TEMPERATURE (°C)
100
10
1
0.100
0.010
0.001
0.02
0.100
1
10
100
CURRENT IN AMPERES
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
200
Preheat:
180
(Depends on Flux Activation Temperature)
160
140
120
100
80
60
40
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
Recommended Hand-Solder Parameters:
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
20
0
10
20
0
Temperature (°C) - Measured on bottom side of board
300
Time (Seconds)
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Cooling Time
Preheat Time
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
373 Series
148
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/373.html for current information.
Radial Lead Fuses
TR5® > Fast-Acting > 373 Series
Product Characteristics
Base/Cap: Brown Thermoplastic
Polyamide PA 6.6, UL 94 V-0
Round Pins: Copper, Tin-plated
Materials
Lead Pull Strength
10 N (EN 60068-2-21)
Solderability
260ºC, ≤ 3s. (Wave)
350ºC, ≤ 1s. (Soldering Iron)
Soldering Heat
Resistance
260ºC, 10s. (IEC 60068-2-20)
350ºC, 3s. (Soldering Iron)
Operating Temperature
-40ºC to +85ºC (consider de-rating)
-40ºC/+85ºC/21 days
(EN 60068-1,-2-1,-2-2,-2-78)
+10ºC to +60ºC
RH ≤ 75% yearly average, without
dew, maximum value for 30 days95%
24 cycles at 15 min. each
(EN 60068-2-6)
10 - 60 Hz at 0.75 mm amplitude
60 - 2000 Hz at 10G’s acceleration
Climatic Category
Stock Conditions
Vibration Resistance
Part Numbering System
Dimensions
8.5
max. 8
373 xxxx 0000
Series
0.5 min
L
Amp Code
0.6
Refer to Amp Code column of
Electrical Characteristics Table
0000 Tape/Ammopack (1,000 pcs.)
0410 Short Leads - Bulk (1,000 pcs.)
0430 Short Leads - Bulk (200 pcs.)
1 +0.1
5.08
373 Series
Packaging Code
Holes in PCB
Long Leads (L=18.8mm)
Short Leads (L=4.3mm)
Packaging
Packaging Option
373 Series
Tape & Ammopack
Short Leads
Short Leads
Packaging Specification
Quantity
Quantity &
Packaging Code
Taping Width
N/A
N/A
N/A
1,000
1,000
200
0000
0410
0430
N/A
N/A
N/A
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/373.html for current information.
149
373 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
150
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Radial Lead Fuses
TR5® > Time Lag > 374 Series
374 Series,
TR5®, Time-Lag Fuse
Description
The TR5® 374 Series are time–Lag 250V rated fuses, that
are designed in accordance to UL 248 –14.
Features
t -PXJOUFSOBMSFTJTUBODF
t 3FEVDFE1$#TQBDF
requirements
t 4IPDLTBGFDBTJOH
t %JSFDUTPMEFSBCMFPS
plug–in versions
t )BMPHFOGSFF
t *OUFSOBUJPOBMMZ
approved
Agency Approvals
Agency File Number
Ampere Range
File number:
E 67006
50mA - 6.3A
Certification:
51378
50mA - 6.3A
File number:
E 67006
8A - 10A
t 7JCSBUJPOSFTJTUBOU
t "WBJMBCMFGSPNN"
to 10A
Applications
t #BUUFSZ$IBSHFST
t 1PXFSTVQQMJFT
t $POTVNFS&MFDUSPOJDT
t *OEVTUSJBM$POUSPMMFST
374 Series
Agency
t -FBEoGSFF
Electrical Characteristics
% of Ampere
Rating
Opening Time
200%
60 Seconds, Max.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/374.html for current information.
151
Revised: May 6, 2009
374 Series
Fuses
Introduction toRadial
CircuitLead
Protection
Transientology
TR5® > Time Lag
> 374 Series
Electrical Characteristics
Amp
Code
Rated
Current
Voltage
Rating
0050
0063
0080
0100
0125
0160
0200
0250
0315
0400
0500
0630
0800
1100
1125
1160
1200
1250
1315
1400
1500
1630
1800
2100
50mA
63mA
80mA
100mA
125mA
160mA
200mA
250mA
315mA
400mA
500mA
630mA
800mA
1.00A
1.25A
1.60A
2.00A
2.50A
3.15A
4.00A
5.00A
6.30A
8.00A1
10.00A1
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
250V
Breaking Capacity
Voltage
Drop
1.0 x IN
max. (mV)
Power
Dissipation
1.0 x IN
max. (mW)
Melting
Integral
10 x IN
min. (A2s)
Agency Approvals
900
800
700
600
550
480
390
350
300
250
220
210
160
155
145
130
125
120
110
100
95
90
80
90
45
50
55
60
70
80
80
90
95
100
110
135
130
155
185
210
250
300
350
400
475
570
1000
1250
0.0056
0.009
0.014
0.025
0.044
0.058
0.1
0.17
0.26
0.32
0.6
0.75
0.98
2.1
3.2
4.5
7.5
14
22
36
59
110
150
280
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
50 A / 250 VAC
50-60 Hz
cos ϕ = 1.0
®
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand.
1.60A
2.00A
2.50A
3.15A
4.00A
5.00A
6.30A
8.00A
10.00A
0.250A
0.315A
0.400A
0.500A
0.630A
0.800A
1.00A
1.25A
Average Time Current Curves
0.050A
0.063A
0.080A
0.100A
0.125A
0.160A
0.200A
Temperature De-Rating Curve
100000
10000
TIME IN SECONDS
1000
100
10
1
0.100
0.010
0.001
0.02
0.100
1
10
100
CURRENT IN AMPERES
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
374 Series
152
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/374.html for current information.
Radial Lead Fuses
TR5® > Time Lag > 374 Series
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
Lead-Free Recommendation
200
Preheat:
180
(Depends on Flux Activation Temperature)
160
140
120
100
80
60
40
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
Recommended Hand-Solder Parameters:
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Time (Seconds)
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Cooling Time
Preheat Time
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Materials
Base/Cap: Brown Thermoplastic
Polyamide PA 6.6, UL 94 V-0
Round Pins: Copper, Tin-plated
Lead Pull Strength
10 N (EN 60068-2-21)
Solderability
260ºC, ≤ 3s. (Wave)
350ºC, ≤ 1s. (Soldering Iron)
Soldering Heat
Resistance
260ºC, 10s. (IEC 60068-2-20)
350ºC, 3s. (Soldering Iron)
Operating Temperature
Climatic Category
Stock Conditions
Vibration Resistance
-40ºC to +85ºC (consider de-rating)
-40ºC/+85ºC/21 days
(EN 60068-1,-2-1,-2-2,-2-78)
+10ºC to +60ºC
RH ≤ 75% yearly average, without
dew, maximum value for 30 days95%
24 cycles at 15 min. each
(EN 60068-2-6)
10 - 60 Hz at 0.75 mm amplitude
60 - 2000 Hz at 10G’s acceleration
374 Series
Product Characteristics
Part Numbering System
Dimensions
8.5
Series
5.08
L
h
i d
L i
Amp Code
0.5 min
0.6
Refer to Amp Code column of
Electrical Characteristics Table
1 +0.1
L
max. 8
374 xxxx 0000
Packaging Code
0000 Tape/Ammopack (1,000 pcs.)
0410 Short Leads - Bulk (1,000 pcs.)
0430 Short Leads - Bulk (200 pcs.)
l
Holes in PCB
Long Leads (L=18.8mm)
Short Leads (L=4.3mm)
Packaging
Packaging Option
374 Series
Tape & Ammopack
Short Leads
Short Leads
Packaging Specification
Quantity
Quantity &
Packaging Code
Taping Width
N/A
N/A
N/A
1,000
1,000
200
0000
0410
0430
N/A
N/A
N/A
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/374.html for current information.
153
374 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
154
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Radial Lead Fuses
TR5® > Time-Lag > 382 Series
382 Series,
TR5®, Time-Lag Fuse
Description
The 382 Series are TR5®, time-Lag type, 250V rated fuses,
with enhanced breaking capacity designed in accordance
to IEC 60127-3.
Features
Agency Approvals
t -PXJOUFSOBMSFTJTUBODF
t 3FEVDFE1$#TQBDF
requirements
t 4IPDLTBGFDBTJOH
t %JSFDUTPMEFSBCMFPS
plug-in versions
t )BMPHFOGSFF
t 7JCSBUJPOSFTJTUBOU
t "CSFBLJOHDBQBDJUZ
Agency File Number
Ampere Range
5007679-1170-0038/82455
1A - 4A
Liscense number:
5007679-1170-0006/82571
Certification:
709068
File number:
E 67006
JET1896-31007-2001
JET1896-31007-1003
2007010207240344
CQC07012021162
SU05024-7003
SU05024-7002
SU05024-7001
SU05024-7004
SU05024-7005
t "WBJMBCMFGSPN"UP
10A
t *OUFSOBUJPOBMMZ
approved
Applications
5A - 6.3A
1A - 6.3A
t #BUUFSZ$IBSHFST
t 1PXFSTVQQMJFT
1A - 10A
t $POTVNFS&MFDUSPOJDT
t *OEVTUSJBM$POUSPMMFST
1A - 10A
Electrical Characteristics
1A - 4A
5A - 6.3A
1A - 6.3A
% of
Ampere
Rating
150%
1A - 6.3A
8A - 10A
1 Hour, Min.
1 Hour, Min.
210%
2 Minutes, Max.
300 s, Max.
275%
400 ms, Min. ;
10 Sec., Max.
1 s, Min. ; 20 s, Max.
400%
150 ms, Min. ;
3 Sec., Max.
150 ms, Min. ;
3 Sec., Max.
1000%
20 ms, Min. ; 150 ms, Max.
20 ms, Min. ; 150 ms, Max.
Opening Time
382 Series
Agency
t -FBEGSFF
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/382.html for current information.
155
Revised: May 6, 2009
382 Series
Fuses
Introduction toRadial
CircuitLead
Protection
TR5® > Time-LagTransientology
> 382 Series
Electrical Characteristics
Amp
Code
Rated
Current
Voltage
Rating
Breaking
Capacity
Voltage
Drop
1.0 x IN
max. (mV)
Power
Dissipation
1.5 x IN
max. (mW)
Melting
Integral
10 x IN
min. (A2s)
Agency Approvals
1100
1.00 A
250 V
100
400
3.0
X
X
X
X
X
X
1125
1.25 A
250 V
95
465
4.5
X
X
X
X
X
X
1160
1.60 A
250 V
90
490
9.0
X
X
X
X
X
X
1200
2.00 A
250 V
1250
2.50 A
250 V
100A /
250VAC
50-60 Hz
cos ϕ = 1.0
85
670
12
X
X
X
X
X
X
80
750
22
X
X
X
X
X
X
75
900
32
X
X
X
X
X
X
70
1200
58
X
X
X
X
X
X
1315
3.15 A
250 V
1400
4.00 A
250 V
1500
5.00 A
250 V
65
1250
90
G
X
X
X
QCC
X
1630
6.30 A
250 V
65
1400
105
G
X
X
X
CQC
X
1800
8.00 A
250 V
63
1600
180
X
X
2100
10.00 A
250 V
57
1600
260
X
X
Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand.
Average Time Current Curves
1.00A
1.25A
1.60A
2.00A
2.50A
3.15A
4.00A
5.00A
6.30A
8.00A
10.00A
Temperature Rerating Curve
100000
10000
TIME IN SECONDS
1000
100
10
1
0.100
0.010
0.001
0.20
1
10
100
1000
CURRENT IN AMPERES
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
382 Series
156
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/382.html for current information.
Radial Lead Fuses
TR5® > Time-Lag > 382 Series
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
Lead-Free Recommendation
220
Preheat:
200
(Depends on Flux Activation Temperature)
180
160
140
120
80
60
40
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
100
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
Recommended Hand-Solder Parameters:
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Time (Seconds)
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Cooling Time
Preheat Time
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Base/Cap: Brown Thermoplastic
Polyamide PA 6.6, UL 94 V-0
Round Pins: Copper, Tin-plated
Materials
Lead Pull Strength
10 N (EN 60068-2-21)
Solderability
260ºC, ≤ 3s. (Wave)
350ºC, ≤ 1s. (Soldering Iron)
Soldering Heat
Resistance
260ºC, 10s. (IEC 60068-2-20)
350ºC, 3s. (Soldering Iron)
Operating Temperature
Climatic Category
Stock Conditions
Vibration Resistance
Dimensions
-40ºC to +85ºC /21 days
(EN 60068-1,-2-1,-2-2,-2-78)
+10ºC to +60ºC
RH ≤ 75% yearly average, without
dew, maximum value for 30
days–95%
24 cycles at 15 min. each
(EN 60068-2-6)
10 - 60 Hz at 0.75 mm amplitude
60 - 2000 Hz at 10 g acceleration
Part Numbering System
8.5
382 xxxx 0000
max. 8
Series
0.6
0.5 min
L
-40ºC to +85ºC (consider de-rating)
382 Series
Product Characteristics
Amp Code
Long Leads (L=18.8mm)
Short Leads (L=4.3mm)
Refer to Amp Code column of
Electrical Characteristics Table
Packaging Code
0000 Tape/Ammopack (1,000 pcs.)
0410 Short Leads - Bulk (1,000 pcs.)
0430 Short Leads - Bulk (200 pcs.)
1 +0.1
5.08
Holes in PCB
Packaging
Packaging Option
382 Series
Tape & Ammopack
Short Leads
Short Leads
Packaging Specification
Quantity
Quantity &
Packaging Code
Taping Width
N/A
N/A
N/A
1,000
1,000
200
0000
0410
0430
N/A
N/A
N/A
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/382.html for current information.
157
382 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
158
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Radial Lead Fuses
TR5® > Time-Lag > 383 Series
383 Series,
TR5®, Time-Lag Fuse
Description
TR5®),%+!'38/%
1!3%$!-$$%2)'-%$)-!##.1$!-#%
3.
Features
9 Lead-free
9 -3%1-!3).-!++8!//1.5%$
9 %$4#%$2/!#%
1%04)1%,%-32
9 .6)-3%1-!+1%2)23!-#%
9 (.#*2!&%#!2)-'
9 )1%#32.+$%1!"+%.1
/+4')-5%12).-2
9 )"1!3).-1%2)23!-3
9 !+.'%-&1%%
Agency Approvals
Applications
Agency
Agency File Number
Ampere Range
5007679-1170-0038/92585
4A - 5A
JET1896-31007-2001
JET1896-31007-1003
1A - 5A
6.3A - 10A
E67006
1A - 10A
383 Series
9 +%#31.-)#!++!23
Electrical Characteristics for Series
Electrical Characteristics for Series
% of Ampere
Rating
Opening Time
(1A-6.3A)
% of Ampere
Rating
Opening Time
(8A-10A)
150%
1 Hour, Minimum
%
.41)-),4,
210%
120 sec., Maximum
%
2%#!7),4,
275%
400 ms., Min.; 10 sec., Max.
%
2%#)-2%#!7
400%
150 ms., Min.; 3 sec., Max.
%
,2)-
2%#!7
1000%
20 ms., Min.; 150 ms., Max.
,2)-,2!7
Electrical Characteristics Specifications by Item
Amp
Code
Amp
Rating
(A)
Max
Voltage
Rating
(V)
1100
1.00
1125
1.25
1160
Voltage
Drop
1.0 x 1N
max. (mV)
Power
Dissipation
1.5 x 1N
max. (mW)
Melting
Integral
10 x 1N
min. (A2s)
300
100
400
3.0
X
X
300
95
465
4.5
X
X
1.60
300
90
490
9.0
X
X
1200
2.00
300
85
670
12
X
X
1250
2.50
300
80
750
22
X
X
1315
3.15
300
75
900
32
X
X
1400
4.00
300
70
1200
58
X
X
X
1500
5.00
300
65
1250
90
X
X
X
1630
6.30
300
65
1400
105
X
1800
8.00
300
63
1600
180
X
2100
10.00
300
57
1600
260
X
Breaking Capacity
50-60Hz/cos =1
[email protected]
[email protected]
[email protected]
Agency Approvals
Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/383.html for current information.
159
Revised: May 6, 2009
383 Series
Fuses
Introduction toRadial
CircuitLead
Protection
TR5® > Time-LagTransientology
> 383 Series
Temperature Rerating Curve
Average Time Current Curves
10A
8A
6.3A
5A
4A
3.15A
2.5A
2A
1.6A
1.25A
1A
140
100000
120
PERCENT OF RATING
100
10000
80
60
1000
40
23°C
20
-20°C
0°C
20°C
40°C
60°C
TIME IN SECONDS
100
0
-40°C
80°C
AMBIENT TEMPERATURE
10
1
0.1
0.01
0.001
0.1
1
10
100
1000
CURRENT IN AMPERES
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
Preheat:
200
(Depends on Flux Activation Temperature)
180
160
140
120
80
60
40
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
100
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
Recommended Hand-Solder Parameters:
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
20
0
10
20
0
Temperature (°C) - Measured on bottom side of board
300
Time (Seconds)
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Cooling Time
Preheat Time
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
383 Series
160
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/383.html for current information.
Radial Lead Fuses
TR5® > Time-Lag > 383 Series
Product Characteristics
Materials
Base/Cap: Brown Thermoplastic
Polyamide PA6.6, UL 94 V0
Round Pins: tin-plated Copper
Operating Temperature
-65°C to +125°C (based on internal thermal
cycle test up 125°C consider de-rating)
Lead Pull Strength
10 N (IEC 60068-2-21)
Climatic Category
-40°C / +85°C / 21days
(EN60068-1,-2-1,-2-2,-2-78)
Solderability
260°C, ≤ 3s (Wave)
350°C, ≤ 1s (Soldering Iron)
Stock Condition
Soldering Heat
Resistance
260°C, 10s (IEC60068-2-20)
350°C, 3s (Soldering Iron)
+10°C to +60°C
relative humidity 75% yearly average,
without dew, maximum value for 30 days-95%
Vibration Resistance
24 cycles at 15min. Each (EN60068-2-6)
10 - 60 Hz at 0.75 mm amplitude
60 - 2000 Hz at 10g acceleration
Dimensions
Part Numbering System
8.5
383 xxxx 0000
max. 8
Series
Amp Code
0.5 min
Packaging Code
0000 Tape/Ammopack (1,000pcs.)
0410 Short Leads - Bulk (1,000pcs.)
383 Series
5.08
Refer to Amp Code column of
Electrical Characteristics Table
1 + 0.1
2
0.6
Holes in PCB
Long Leads (L=18.8mm)
Short Leads (L=4.3mm)
Packaging
383 Series
Tape & Ammopack
Short Leads
N/A
N/A
1,000
1,000
0000
0410
N/A
N/A
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/383.html for current information.
161
383 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
162
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Radial Lead Fuses
TE5® > Time-Lag > 369 Series
369 Series,
TE5®, Time-Lag Fuse
Description
TE5®(+$* &27.$0 2$# ,##$1(&,$#(, ""-0# ,"$
2-
Features
8 Lead-free
8 ,2$0, 2(-, **7 ..0-4$#
8 $#3"$#1. "$
0$/3(0$+$,21
8 -5(,2$0, *0$1(12 ,"$
8 (0$"21-*#$0 !*$-0
.*3&(,4$01(-,1
8 (!0 2(-,0$1(12 ,2
8 '-")1 %$" 1(,&
8 *-&$,%0$$
Agency Approvals
Applications
Agency
Agency File Number
Ampere Range
8 *$"20-,(" ** 12
% of Ampere
Rating
Opening Time
%
-30(,(+3+
%
1$" 6(+3+
%
+1(,1$" 6
%
+1(,1$" 6
+1(,+1 6
369 Series
Electrical Characteristics for Series
Electrical Characteristics Specifications by Item
Voltage
Drop
1.0 x IN
max. (mV)
Power
Dissipation
1.5 x IN
max. (mW)
300
115
400
5.80
X
X
300
95
600
13.50
X
X
2.00
300
90
700
21.00
X
X
1315
3.15
300
80
1100
55.00
X
X
1400
4.00
300
75
1200
100.00
X
X
1500
5.00
300
70
1000
90.00
X
X
1630
6.30
300
65
1200
126.00
X
Amp
Code
Amp
Rating
(A)
Voltage
Rating
(V)
1100
1.00
1160
1.60
1200
Breaking Capacity
[email protected]
50-60Hz/cos =1
Melting
Integral
10 x IN
min. (A2s)
Agency Approvals
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/369.html for current information.
163
Revised: May 5, 2009
369 Series
Fuses
Introduction toRadial
CircuitLead
Protection
TE5® > Time-LagTransientology
> 369 Series
Temperature Rerating Curve
Average Time Current Curves
6.3A
5A
4A
3.15A
2.5A
2A
1.6A
1.25A
1A
.800A
100000
10000
1000
TIME IN SECONDS
100
10
1
0.1
0.01
0.001
0.1
1
10
100
1000
CURRENT IN AMPERES
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
Preheat:
200
(Depends on Flux Activation Temperature)
180
160
140
120
80
60
40
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
100
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
Recommended Hand-Solder Parameters:
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Time (Seconds)
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Cooling Time
Preheat Time
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
369 Series
164
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/369.html for current information.
Radial Lead Fuses
TE5® > Time-Lag > 369 Series
Product Characteristics
Base/Cap: Brown Thermoplastic
Polyamide PA6.6, UL 94 V0
Round Pins: Tin-plated Copper
Materials
Lead Pull Strength
10 N (IEC 60068-2-21)
Solderability
260°C, ≤ 3s (Wave)
350°C, ≤ 1s (Soldering Iron)
Soldering Heat
Resistance
260°C, 10s (IEC60068-2-20)
350°C, 3s (Soldering Iron)
Operating Temperature
-40°C to +85°C (considerde-rating)
Climatic Category
-40°C / +85°C / 21days
(EN60068-1,-2-1,-2-2,-2-78)
Stock Condition
+10°C to +60°C
relative humidity 75% yearly average,
without dew, maximum value for 30 days-95%
Vibration Resistance
24 cycles at 15min. Each (EN60068-2-6)
10 - 60 Hz at 0.75 mm amplitude
60 - 2000 Hz at 10g acceleration
Dimensions
Part Numbering System
max.4
8.5
369 xxxx 0000
max. 8
Series
Amp Code
Refer to Amp Code column of
Electrical Characteristics Table
1.5
Packaging Code
369 Series
0000 Tape/Ammopack (1,400pcs.)
0440 Short Leads - Bulk (1,400pcs.)
1 + 0.1
2
0.5 min
0.6
5.08
Holes in PCB
Long Leads (L=18.8mm)
Short Leads (L=4.3mm)
Packaging
369 Series
Tape & Ammopack
Short Leads
N/A
N/A
1,400
1,400
0000
0440
N/A
N/A
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/369.html for current information.
165
369 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
166
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Radial Lead Fuses
TE5® > Transient Tolerant > 385 Series
385 Series,
TR5®, Telecom Interface Protector Fuse
Description
The 385 Series are TE5®, protector, time-Lag type, 125V
rated fuses, that are designed in accordance to
UL 248-14.
Features
Agency Approvals
t 4VSHFQSPPGGPS
telecom applications
t *SSFWFSTJCMFQIZTJDBM
separation
t 3FEVDFE1$#TQBDF
requirements
t 'MBNFSFTJTUBOU
encapsulated casing
t )JHIMZEFmOFEDVUPGG
times
t "WBJMBCMFGSPNN"
to 1.5A
t -PXJOUFSOBMSFTJTUBODF
Agency
Agency File Number
Ampere Range
E67006
350mA - 1.5A
Applications
t 1PXFSTVQQMJFT
t $POTVNFS&MFDUSPOJDT
t *OEVTUSJBMDPOUSPMMFST
385 Series
t #BUUFSZDIBSHFST
Electrical Characteristics
% of Ampere
Rating
Opening Time
100%
2 Hours, Max.
300%
300 ms, Min. ; 5 Seconds, Max.
Electrical Characteristics
1
Amp
Code
Rated Voltage
Current Rating
0350
350mA
125V
0500
500mA
125V
0800
800mA
125V
Breaking
Capacity
Voltage
Drop
1.0 x IN
max. (mV)
250
50 A / 125 VAC
50-60 Hz
cosϕ=1.0
Power
Disspation
1.0 x IN
max. (mW)
90
Melting
Integral
10 x IN
min. (A2s)
Surge Amplitude (A)1
Agency
Approvals
FCC
Bellcore
ITU
0.6
32
19
36
x
220
110
1.2
48
26
61
x
170
130
2.7
80
42
67
x
1100
1.00A
125V
140
130
4.5
100
52
67
x
1125
1.25A
125V
125
140
6.7
128
65
67
x
1150
1.50A
125V
120
170
9.0
155
78
67
x
FCC 47 Part 68:
Minimum pulse load quantity is 2 pulses at a test generator output of 800V and 10x560μs waveform.
ITU-T K.20:
Minimum pulse load quantity is 30 pulses at a test generator output of 1000V, 67A and 10x700μs waveform.
Bellcore GR-1089: Minimum pulse load quantity is 50 pulses at a test generator output of 1000V and 10x1000μs.
Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/385.html for current information.
167
Revised: May 6, 2009
385 Series
Fuses
Introduction toRadial
CircuitLead
Protection
TE5® > Transient TolerantTransientology
> 385 Series
0.800A
1.00A
1.25A
1.50A
0.500A
Average Time Current Curves
0.350A
Temperature Rerating Curve
100000
10000
TIME IN SECONDS
1000
100
10
1
0.100
0.010
0.001
0.20
1
10
100
1000
CURRENT IN AMPERES
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
Preheat:
200
(Depends on Flux Activation Temperature)
180
160
140
120
80
60
40
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
100
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
Recommended Hand-Solder Parameters:
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Time (Seconds)
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Cooling Time
Preheat Time
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
385 Series
168
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/385.html for current information.
Radial Lead Fuses
TE5® > Transient Tolerant > 385 Series
Product Characteristics
Base/Cap: Brown Thermoplastic
Polyamide PA 6.6, UL 94V-0
Round Pins: Copper, Tin-plated
Materials
Lead Pull Strength
10N (EN 60068-2-21)
Solderability
260ºC, ≤ 3s. (Wave)
350ºC, ≤ 1s. (Soldering Iron)
Soldering Heat
Resistance
260ºC, 10s. (IEC 60068-2-20)
350ºC, 3s. (Soldering Iron)
Dimensions
Operating Temperature
-40ºC to +85ºC (consider de-rating)
Climatic Category
-40ºC to +85ºC/21 days
(EN 60068-1,-2-1,-2-2,-2-78)
Stock Conditions
+10 ºC to +60 ºC RH,
≤ 75% yearly average, without dew,
maximum value for 30 days-95%
Vibration Resistance
24 cycles at 15 min. each
(EN 60068-6)
10 - 60 Hz at 0.75 mm amplitude
60 - 2000 Hz at 10 g acceleration
Part Numbering System
max. 4
385 xxxx 0000
max. 8
8,5
Series
18,8
… 0,6
0,5 min
Amp Code
Refer to Amp Code column of
Electrical Characteristics Table
1,5
Packaging Code
1 +0,1
385 Series
0000 Tape/Ammopack (1,400 pcs.)
5,08
Dimensions (mm)
Holes in PCB
Long Leads (L=18.8mm)
Packaging
Packaging Option
385 Series
Tape & Ammopack
Packaging Specification
Quantity
Quantity &
Packaging Code
Taping Width
N/A
1,400
0000
N/A
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/385.html for current information.
169
385 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
170
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Radial Lead Fuses
TE5® > Fast Acting > 391 Series
391 Series,
TE5®, Fast-Acting Fuse
Description
The 391 Series are TR5® short circuit protector, fast-acting
type, 65V rated fuses. For Short Circuit Protection of
Sensitive Electronic Components and Assemblies.
Features
t 'PSXPSMEXJEF
applications
t -PXJOUFSOBMSFTJTUBODF
t 'MBNFSFTJTUBOU
encapsulated casing
t 3FEVDFE1$#TQBDF
requirements
t )JHIMZEFmOFEDVUPGG
times
Agency Approvals
Agency
Agency File Number
Ampere Range
E67006
125mA - 4A
t *SSFWFSTJCMFQIZTJDBM
separation
t 3P)4DPNQMJBOUBOE
Lead-free
t "WBJMBCMFGSPNN"
to 4A.
Electrical Characteristics
% of Ampere
Rating
Opening Time
300
2 Seconds, Max.
t #BUUFSZDIBSHFST
t 1PXFSTVQQMJFT
t $POTVNFS&MFDUSPOJDT
t *OEVTUSJBMDPOUSPMMFST
391 Series
Applications
Electrical Characteristics
Cold
Resistance
0.1 x IN
max. (mΩ)
Power
Disspation
1.0 x IN
max. (mW)
Melting
Integral
10 x IN
max. (A2s)
Agency
Approvals
Amp Code
Rated
Current
Marking
Code*
Voltage
Rating
0125
125 mA
SP13
65 V
3400
190
0.005
x
0160
160 mA
SP16
65 V
2450
210
0.0095
x
0200
200 mA
SP20
65 V
1750
240
0.019
x
0250
250 mA
SP25
65 V
195
52
0.012
x
Breaking Capacity
0315
315 mA
SP32
65 V
155
65
0.018
x
0400
400 mA
SP40
65 V
120
85
0.034
x
0500
500 mA
SP50
65 V
95
105
0.057
x
0630
630 mA
SP63
65 V
75
135
0.095
x
0800
800 mA
SP80
65 V
58
170
0.16
x
1100
1.00 A
SP100
65 V
46
220
0.27
x
1125
1.25 A
SP125
65 V
37
270
0.45
x
50A / 65 VAC/DC
50-60 Hz cosϕ=1.0
1160
1.60 A
SP160
65 V
29
350
0.77
x
1200
2.00 A
SP200
65 V
23
440
0.85
x
1250
2.50 A
SP250
65 V
18
550
2.2
x
1315
3.15 A
SP315
65 V
14
700
3.7
x
1400
4.00 A
SP400
65 V
12
900
6.5
x
* Physical Marking on top of the device
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/391.html for current information.
171
Revised: May 6, 2009
391 Series
Fuses
Introduction toRadial
CircuitLead
Protection
TE5® > Fast ActingTransientology
> 391 Series
0.250A
0.315A
0.400A
0.500A
0.630A
0.800A
1.00A
1.25A
1.60A
2.00A
2.50A
3.15A
4.00A
Average Time Current Curves
0.125A
0.160A
0.200A
Temperature Rerating Curve
100000
10000
TIME IN SECONDS
1000
100
10
1
0.100
0.010
0.001
0.20
1
10
100
1000
CURRENT IN AMPERES
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
Preheat:
200
(Depends on Flux Activation Temperature)
180
160
140
120
80
60
40
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
100
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
Recommended Hand-Solder Parameters:
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Time (Seconds)
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Cooling Time
Preheat Time
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
391 Series
172
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/391.html for current information.
Radial Lead Fuses
TE5® > Fast Acting > 391 Series
Product Characteristics
Base/Cap: Brown Thermoplastic
Polyamide PA 6.6, UL 94V-0
Round Pins: Copper, Tin-plated
Materials
Lead Pull Strength
10 N (EN 60068-2-21)
Solderability
260ºC, ≤ 3s. (Wave)
350ºC, ≤ 1s. (Soldering Iron)
Soldering Heat
Resistance
260ºC, 10s. (IEC 60068-2-20)
350ºC, 3s. (Soldering Iron)
Operating Temperature
-40ºC to +85ºC (consider de-rating)
Climatic Category
-40ºC to +85ºC/21 days
(EN 60068-1,-2-1,-2-2,-78)
Stock Conditions
+10 ºC to +60 ºC RH,
≤ 75% yearly average, without dew,
maximum value for 30 days-95%
Vibration Resistance
24 cycles at 15 min. each
(EN 60068-6)
10 - 60 Hz at 0.75 mm amplitude
60 - 2000 Hz at 10 g acceleration
Part Numbering System
Dimensions
max. 4
391 xxxx 0000
max. 8
8,5
Series
18,8
… 0,6
0,5 min
Amp Code
Refer to Amp Code column of
Electrical Characteristics Table
1,5
0000 Tape/Ammopack (1,400 pcs.)
1 +0,1
5,08
391 Series
Packaging Code
Holes in PCB
Dimensions (mm)
Packaging
Packaging Option
391 Series
Tape & Ammopack
Packaging Specification
Quantity
Quantity &
Packaging Code
Taping Width
N/A
1,400
0000
N/A
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/391.html for current information.
173
391 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
174
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Radial Lead Fuses
TE5® > Time-Lag > 392 Series
392 Series,
TE5®, Time-Lag Fuse
Description
TE5®, time-Lag type, 250V rated, designed in accordance
to IEC 60127-3.
Features
approved
t -FBEGSFF
t 3FEVDFE1$#TQBDF
requirements
t -PXJOUFSOBMSFTJTUBODF
t %JSFDUTPMEFSBCMFPS
plug-in versions
t 7JCSBUJPOSFTJTUBOU
t 4IPDLTBGFDBTJOH
t )BMPHFOGSFF
t *OUFSOBUJPOBMMZ
Agency Approvals
Agency File Number
Ampere Range
t #BUUFSZ$IBSHFT
t 1PXFSTVQQMJFT
5007679-1170-0007/82577
800mA - 6.3A
t $POTVNFS&MFDUSPOJDT
t *OEVTUSJBM$POUSPMMFST
709069, 710076
800mA - 6.3A
E67006
800mA - 6.3A
JET1896-31007-2002
1A - 5A
CQC07012021162
800mA - 5A
SU05024-7013
SU05024-7014
SU05024-7015
SU05024-7016
SU05024-7017
SU05024-7018
Electrical Characteristics for Series
% of Ampere
Rating
Opening Time
150%
1 Hour, Min.
800mA - 6.3A
210%
120 s, Max.
275%
400 ms Min. ; 10 Sec. Max.
400%
150 ms Min. ; 3 Sec. Max.
1000%
20 ms Min. ; 150 ms Max.
392 Series
Agency
Applications
Electrical Characteristic Specifications by Item
Agency Approvals
Amp
Code
Rated
Current
Voltage
Rating
Breaking
Capacity
Voltage
Drop
1.0 x IN
max. (mV)
Power
Dissipation
1.5 x IN
max. (mW)
Melting
Integral
10 x IN
min. (A2s)
0800
800 mA
250V
25A/250 VAC
110
280
3.80
x
x
x
1100
1.00 A
250V
25A/250 VAC
115
400
5.80
x
x
x
1125
1.25 A
250V
25A/250 VAC
100
500
9.75
x
x
x
x
x
x
x
x
x
x
x
1160
1.60 A
250V
25A/250 VAC
95
600
13.50
x
x
x
x
x
x
1200
2.00 A
250V
25A/250 VAC
90
700
21.00
x
x
x
x
x
x
1250
2.50 A
250V
25A/250 VAC
85
750
32.00
x
x
x
x
x
x
1315
3.15 A
250V
32A/250 VAC
80
1100
55.00
x
x
x
x
x
x
1400
4.00 A
250V
40A/250 VAC
75
1200
100.00
x
x
x
x
x
x
1500
5.00 A
250V
50A/250 VAC
70
1000
90.00
x
x
x
x
x
x
1630
6.30 A
250V
63A/250 VAC
65
1200
126.00
x
x
x
x
Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/392.html for current information.
175
Revised: May 6, 2009
392 Series
Fuses
Introduction toRadial
CircuitLead
Protection
TE5® > Time-LagTransientology
> 392 Series
Average Time Current Curves
0.800A
1.00A
1.25A
1.60A
2.00A
2.50A
3.15A
4.00A
5.00A
6.30A
Temperature Rerating Curve
100000
10000
TIME IN SECONDS
1000
100
10
1
0.100
0.010
0.001
0.20
1
10
100
1000
CURRENT IN AMPERES
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
Preheat:
200
(Depends on Flux Activation Temperature)
180
160
140
120
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
100
80
60
40
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
Recommended Hand-Solder Parameters:
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Time (Seconds)
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Cooling Time
Preheat Time
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
392 Series
176
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/392.html for current information.
Radial Lead Fuses
TE5® > Time-Lag > 392 Series
Product Characteristics
Base/Cap: Brown Thermoplastic
Polyamide PA 6.6, UL 94 V-0
Round Pins: Copper, Tin-plated
Materials
Lead Pull Strength
10 N (IEC 60068-2-21)
Solderability
260ºC, ≤ 3 sec. (Wave)
350ºC, ≤ 3 sec. (Soldering iron)
Soldering Heat
Resistance
260ºC, 10 sec. (IEC 60068-2-20)
350ºC, ≤ 3 sec. (Soldering iron)
Operating Temperature
Climatic Category
Stock Conditions
Vibration Resistance
-40ºC to +85ºC (consider de-rating)
-40ºC to +85ºC/21 days
(EN 60068-1,-2-1,-2-2,-2-78)
+10 ºC to +60 ºC
RH ≤ 75% yearly average, without
dew, maximum value for 30 days95%
24 cycles at 15 min. each
(EN 60068-2-6)
10 - 60 Hz at 0.75 mm amplitude
60 - 2000 Hz at 10 g acceleration
Part Numbering System
Dimensions
m ax.4
392 xxxx 0000
m ax.8
8.5
L
0.6
0.5 m in
Series
Amp Code
1.5
Refer to Amp Code column of
Electrical Characteristics Table
392 Series
1 +0.1
Packaging Code
5.08
0000 Tape/Ammopack (1,400 pcs.)
0440 Short Leads - Bulk (1,400 pcs.)
Holes in PCB
Long Leads (L=18.8mm)
Short Leads (L=4.3mm)
Packaging
Packaging Option
392 Series
Tape & Ammopack
Short Leads
Packaging Specification
Quantity
Quantity &
Packaging Code
Taping Width
N/A
N/A
1,400
1,400
0000
0440
N/A
N/A
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/392.html for current information.
177
392 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
178
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Radial Lead Fuses
TE5® > Fast-Acting > 395 Series
395 Series,
TE5®, Fast-Acting Fuse
Description
The 395 Series are TE5®, fast-acting type, 125V rated
fuses, designed in accordance to UL 248-14.
Features
t -PXJOUFSOBMSFTJTUBODF
t 3FEVDFE1$#TQBDF
requirements
t 4IPDLTBGFDBTJOH
t %JSFDUTPMEFSBCMFPS
plug-in versions
t )BMPHFO'SFF
t 7JCSBUJPOSFTJTUBOU
t "WBJMBCMFGSPNN"
to 6.3A
t *OUFSOBUJPOBMMZ
approved
Agency Approvals
Agency File Number
Ampere Range
File number:
E 67006
50mA - 6.3A
File number:
E 67006
50mA - 6.3A
JET1896-31007-1002
1A - 5A
Applications
t #BUUFSZDIBSHFST
t 1PXFSTVQQMJFT
t $POTVNFS&MFDUSPOJDT
t *OEVTUSJBMDPOUSPMMFST
395 Series
Agency
t -FBEGSFF
Electrical Characteristics
% of Ampere
Rating
Opening Time
200%
60 Seconds, Max.
Electrical Characteristics
Amp
Code
Rated
Current
Voltage
Rating
0050
0063
0080
0100
0125
0160
0200
0250
0315
0400
0500
0630
0800
1100
1125
1160
1200
1250
1315
1400
1500
1630
50mA
63mA
80mA
100mA
125mA
160mA
200mA
250mA
315mA
400mA
500mA
630mA
800mA
1.00A
1.25A
1.60A
2.00A
2.50A
3.15A
4.00A
5.00A
6.30A
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
Breaking Capacity
Voltage
Drop
1.0 x IN
max. (mV)
Power
Dissipation
1.0 x IN
max. (mW)
100A / 125 VAC
50-60 Hz
cos ϕ = 1.0
1600
1300
1200
1100
1350
1000
950
900
800
230
220
210
200
190
180
170
160
150
140
130
120
115
85
85
100
110
160
150
210
225
255
95
110
135
160
190
225
275
450
375
445
520
600
850
Melting
Integral
10 x IN
max. (A2s)
0.0001
0.00013
0.0002
0.0013
0.0019
0.0037
0.0075
0.013
0.026
0.015
0.025
0.045
0.068
0.13
0.2
0.39
0.53
1.1
1.9
3.2
6.1
9.7
Agency Approvals
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/395.html for current information.
179
Revised: May 6, 2009
395 Series
Fuses
Introduction toRadial
CircuitLead
Protection
TE5® > Fast-ActingTransientology
> 395 Series
0.400A
0.500A
0.630A
0.800A
1.00A
1.25A
1.60A
2.00A
2.50A
3.15A
4.00A
5.00A
6.30A
0.100A
0.125A
0.160A
0.200A
0.250A
0.315A
Average Time Current Curves
0.050A
0.063A
0.080A
Temperature Rerating Curve
100000
10000
TIME IN SECONDS
1000
100
10
1
0.100
0.010
0.001
0.02
0.100
1
10
100
CURRENT IN AMPERES
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
Preheat:
200
(Depends on Flux Activation Temperature)
180
160
140
120
80
60
40
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
100
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
Recommended Hand-Solder Parameters:
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Time (Seconds)
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Cooling Time
Preheat Time
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
395 Series
180
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/395.html for current information.
Radial Lead Fuses
TE5® > Fast-Acting > 395 Series
Product Characteristics
Base/Cap: Brown Thermoplastic
Polyamide PA 6.6, UL 94 V-0
Round Pins: Copper, Tin-plated
Materials
Lead Pull Strength
10 N (IEC 60068-2-21)
Solderability
260ºC, ≤ 3s. (Wave)
350ºC, ≤ 1s. (Soldering Iron)
Soldering Heat
Resistance
260ºC, 10s. (IEC 60068-2-20)
350ºC, 3s. (Soldering Iron)
Operating Temperature
-40ºC to +85ºC (consider de-rating)
-40ºC to +85ºC/21 days
(EN 60068-1,-2-1,-2-2,-2-78)
+10 ºC to +60 ºC
RH ≤ 75% yearly average, without
dew, maximum value for 30 days95%
24 cycles at 15 min. each
(EN 60068-2-6)
10 - 60 Hz at 0.75 mm amplitude
60 - 2000 Hz at 10 g acceleration
Climatic Category
Stock Conditions
Vibration Resistance
Dimensions
Part Numbering System
max.4
395 xxxx 0000
Series
5,08
Refer to Amp Code column of
Electrical Characteristics Table
Packaging Code
395 Series
Æ 0,6
0,5 min
Amp Code
1,5
0000 Tape/Ammopack (1,400 pcs.)
0440 Short Leads - Bulk (1,400 pcs.)
1 +0,1
L
max. 8
8,5
Holes in PCB
Long Leads (L=18.8mm)
Short Leads (L=4.3mm)
Packaging
Packaging Option
395 Series
Tape & Ammopack
Short Leads
Packaging Specification
Quantity
Quantity &
Packaging Code
Taping Width
N/A
N/A
1,400
1,400
0000
0440
N/A
N/A
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/395.html for current information.
181
395 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
182
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Radial Lead Fuses
TE5® > Time-Lag > 396 Series
396 Series,
TE5®, Time-Lag Fuse
Description
The 396 Series are TE5®, time-Lag type, 125V rated, fuses,
designed in accordance to UL 248-14.
Features
t -PXJOUFSOBMSFTJTUBODF
t 3FEVDFE1$#TQBDF
requirements
t 4IPDLTBGFDBTJOH
t %JSFDUTPMEFSBCMFPS
plug-in versions
t )BMPHFOGSFF
t *OUFSOBUJPOBMMZ
approved
Agency Approvals
Agency File Number
File number:
E 67006
File number:
E 67006
t 7JCSBUJPOSFTJTUBOU
t "WBJMBCMFGSPNN"
to 6.3A
Ampere Range
Applications
50mA - 6.3A
50mA - 6.3A
JET1896-31007-1002
1A - 5A
t #BUUFSZDIBSHFST
t 1PXFSTVQQMJFT
t $POTVNFS&MFDUSPOJDT
t *OEVTUSJBMDPOUSPMMFST
396 Series
Agency
t -FBEGSFF
Electrical Characteristics
% of Ampere
Rating
Opening Time
200%
60 Seconds, Max.
Electrical Characteristics
Amp Code
Rated
Current
Voltage
Rating
0050
0063
0080
0100
0125
0160
0200
0250
0315
0400
0500
0630
0800
1100
1125
1160
1200
1250
1315
1400
1500
1630
50mA
63mA
80mA
100mA
125mA
160mA
200mA
250mA
315mA
400mA
500mA
630mA
800mA
1.00A
1.25A
1.60A
2.00A
2.50A
3.15A
4.00A
5.00A
6.30A
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
125V
Power
Dissipation
1.0 x IN
max. (mW)
Melting
Integral
10 x IN
min. (A2s)
Agency Approvals
Breaking Capacity
Voltage
Drop
1.0 x IN
max. (mV)
100A / 125 VAC
50-60 Hz
cos ϕ = 1.0
900
800
700
600
550
480
390
350
300
250
220
210
160
155
145
130
125
120
110
110
95
95
45
50
55
60
70
80
80
90
95
100
110
135
130
155
185
210
250
300
350
400
475
570
0.0056
0.009
0.014
0.025
0.044
0.058
0.1
0.17
0.26
0.32
0.58
0.75
0.98
2.2
3.8
5.2
7.5
14
22
27
59
100
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/396.html for current information.
183
Revised: May 6, 2009
396 Series
Fuses
Introduction toRadial
CircuitLead
Protection
TE5® > Time-LagTransientology
> 396 Series
1.00A
1.25A
1.60A
2.00A
2.50A
3.15A
4.00A
5.00A
6.30A
0.630A
0.800A
0.250A
0.315A
0.400A
0.500A
Average Time Current Curves
0.050A
0.063A
0.080A
0.100A
0.125A
0.160A
0.200A
Temperature Rerating Curve
100000
10000
TIME IN SECONDS
1000
100
10
1
0.100
0.010
0.001
0.02
0.100
1
10
100
CURRENT IN AMPERES
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
Preheat:
200
(Depends on Flux Activation Temperature)
180
160
140
120
80
60
40
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
100
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
Recommended Hand-Solder Parameters:
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Time (Seconds)
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Cooling Time
Preheat Time
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
396 Series
184
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/396.html for current information.
Radial Lead Fuses
TE5® > Time-Lag > 396 Series
Product Characteristics
Materials
Base/Cap: Brown Thermoplastic
Polyamide PA 6.6, UL 94 V-0
Round Pins: Copper, Tin-plated
Lead Pull Strength
10 N (IEC 60068-2-21)
Solderability
260ºC, ≤ 3s. (Wave)
350ºC, ≤ 1s. (Soldering Iron)
Soldering Heat
Resistance
260ºC, 10s. (IEC 60068-2-20)
350ºC, 3s. (Soldering Iron)
Operating Temperature
-40ºC to +85ºC (consider de-rating)
-40ºC to +85ºC/21 days
(EN 60068-1,-2-1,-2-2,-2-78)
+10 ºC to +60 ºC
RH ≤ 75% yearly average, without
dew, maximum value for 30 days95%
24 cycles at 15 min. each
(IEC 60068-2-6)
10 - 60 Hz at 0.75 mm amplitude
60 - 2000 Hz at 10 g acceleration
Climatic Category
Stock Conditions
Vibration Resistance
Part Numbering System
Dimensions
max.4
396 xxxx 0000
Series
Amp Code
Æ 0,6
0,5 min
L
max. 8
8,5
Refer to Amp Code column of
Electrical Characteristics Table
1,5
Packaging Code
396 Series
0000 Tape/Ammopack (1,400 pcs.)
0440 Short Leads - Bulk (1,400 pcs.)
1 +0,1
5,08
Holes in PCB
Long Leads (L=18.8mm)
Short Leads (L=4.3mm)
Packaging
Packaging Option
396 Series
Tape & Ammopack
Short Leads
Packaging Specification
Quantity
Quantity &
Packaging Code
Taping Width
N/A
N/A
1,400
1,400
0000
0440
N/A
N/A
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/396.html for current information.
185
396 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
186
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Radial Lead Fuses
TE5® > Transient Tolerant Fuse > 397 Series
397 Series,
TE5®, Transient Tolerant Fuse
Description
The 397 Series are TE5®, time-Lag type, 125V rated fuses,
designed in accordance to UL248-14.
Features
Agency Approvals
t 7JCSBUJPOSFTJTUBOU
t 3FEVDFE1$#TQBDF
requirements
t 3P)4DPNQMJBOUBOE
Lead-free
t %JSFDUTPMEFSBCMFPS
plug-in versions
t "WBJMBCMFGSPNN"
to 1.5A
t )BMPHFOGSFF
t 4IPDLTBGFDBTJOH
Agency File Number
Ampere Range
File No.: E67006
350mA - 1.5A
File No.: E67006
350mA - 1.5A
Applications
t #BUUFSZDIBSHFST
t 1PXFSTVQQMJFT
t $POTVNFS&MFDUSPOJDT
t *OEVTUSJBMDPOUSPMMFST
Electrical Characteristics
% of Ampere
Rating
Opening Time
200%
60 Seconds, Min.
570%
80 ms. Min.; 2 Sec. Max.
1700%
200 s., Max.
397 Series
Agency
t 4VSHF1SPPGGPS
telecom applications
Electrical Characteristics
1
0350
350 mA
125 V
0500
500 mA
125 V
0800
800 mA
125 V
1100
1.00 A
125 V
1125
1.25 A
1150
1.50 A
FCC 47 Part 68:
Breaking Capacity
400
140
0.38
Surge Amplitude
(A)1
ITU
Voltage
Rating
Melting
Integral
10 x IN
min. (A2s)
Bellcore
Rated
Current
Power
Dissipation
1.0 x IN
max. (mW)
FCC
Amp
Code
Voltage
Drop
1.0 x IN
max. (mV)
25
15
29
Agency
Approvals
x
x
340
170
0.79
30
17
38
x
x
300
240
2.4
60
31
50
x
x
240
240
3.5
78
40
65
x
x
125 V
200
250
5
100
50
67
x
x
125 V
190
285
8.5
155
78
67
x
x
50A / 125 VAC
50-60 Hz
cos ϕ = 1.0
Minimum pulse load quantity is 2 pulses at a test generator output of 800 V and 10x560 μs waveform.
ITU-T K.20:
Minimum pulse load quantity is 30 pulses at a test generator output of 1000 V, 67 A and 10x700 μs waveform.
Bellcore GR-1089: Minimum pulse load quantity is 50 pulses at a test generator output of 1000 V and 10x1000 μs.
Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/397.html for current information.
187
Revised: May 6, 2009
397 Series
Fuses
Introduction toRadial
CircuitLead
Protection
TE5® > Transient Tolerant FuseTransientology
> 397 Series
0.800A
1.00A
1.25A
1.50A
0.500A
Average Time Current Curves
0.350A
Temperature Rerating Curve
100000
10000
TIME IN SECONDS
1000
100
10
1
0.100
0.010
0.001
0.20
1
10
100
1000
CURRENT IN AMPERES
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
Lead-Free Recommendation
Preheat:
200
(Depends on Flux Activation Temperature)
180
160
140
120
100
80
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
60
40
Recommended Hand-Solder Parameters:
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Time (Seconds)
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Cooling Time
Preheat Time
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
397 Series
188
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/397.html for current information.
Radial Lead Fuses
TE5® > Transient Tolerant Fuse > 397 Series
Product Characteristics
Base/Cap: Brown Thermoplastic
Polyamide PA 6.6, UL 94V-0
Round Pins: Copper, Tin-plated
Materials
Lead Pull Strength
10 N (EN 60068-2-21)
Solderability
260ºC, ≤ 3s. (Wave)
350ºC, ≤ 1s. (Soldering Iron)
Soldering Heat
Resistance
260ºC, 10s. (IEC 60068-2-20)
350ºC, 3s. (Soldering Iron)
Operating Temperature
-40ºC to +85ºC (consider de-rating)
Climatic Category
-40ºC to +85ºC/21 days
(EN 60068-1,-2-1,-2-2,-78)
Stock Conditions
+10 ºC to +60 ºC RH,
≤ 75% yearly average, without dew,
maximum value for 30 days-95%
Vibration Resistance
24 cycles at 15 min. each
(EN 60068-6)
10 - 60 Hz at 0.75 mm amplitude
60 - 2000 Hz at 10 g acceleration
Part Numbering System
Dimensions
m ax.4
397 xxxx 0000
Series
Amp Code
0,6
0,5 m in
L
m ax.8
8,5
1,5
Refer to Amp Code column of
Electrical Characteristics Table
0000 Tape/Ammopack (1,400 pcs.)
0440 Short Leads - Bulk (1,400 pcs.)
1 +0,1
5,08
397 Series
Packaging Code
Dimensions (mm)
Holes in PCB
Long Leads (L=18.8 mm)
Short Leads (L=4.3 mm)
Packaging
Packaging Option
397 Series
Tape & Ammopack
Short Leads
Packaging Specification
Quantity
Quantity &
Packaging Code
Taping Width
N/A
N/A
1,400
1,400
0000
0440
N/A
N/A
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/397.html for current information.
189
397 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
190
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Radial Lead Fuses
TE5® > Medium Time-Lag > 398 Series
398 Series,
TE5®, Modul Protector® Fuse
Description
The 398 Series are TE5® short circuit protector, medium
time-Lag type, 65V rated fuses.
Features
t 'MBNFSFTJTUBOU
encapsulated casing
t )JHIMZEFmOFEDVUPGG
times
t "WBJMBCMFGSPNN"
to 4A
t -PXJOUFSOBMSFTJTUBODF
t )BMPHFOGSFF
t *SSFWFSTJCMFQIZTJDBM
separation
Agency Approvals
Agency
t 3FEVDFE1$#TQBDF
requirements
Agency File Number
Ampere Range
E67006
125mA - 4A
Applications
t .JTDSPQSPDFTTPSQSPUFDUJPO
% of Ampere
Rating
Opening Time
300
10 Seconds, Max.
398 Series
Electrical Characteristics
Electrical Characteristics
Amp Code
Rated
Current
Marking
Code*
Voltage
Rating
0125
0250
0315
0400
0500
0630
0800
1100
1125
1160
1200
1250
1315
1400
125mA
250mA
315mA
400mA
500mA
630mA
800mA
1.00A
1.25A
1.60A
2.00A
2.50A
3.15A
4.00A
MP13
MP25
MP32
MP40
MP50
MP63
MP80
MP100
MP125
MP160
MP200
MP250
MP315
MP400
65V
65V
65V
65V
65V
65V
65V
65V
65V
65V
65V
65V
65V
65V
Breaking Capacity
Cold
Resistance
0.1 x IN typ.
(mΩ)
Power
Disspation
1.0 x IN
max. (mW)
50A / 65 VAC/DC
50-60 Hz cosϕ=1.0
900
355
260
186
155
115
85
65
48
34
26
21
16
12
50
50
60
75
90
120
140
170
210
320
425
550
650
1000
Melting
Integral
10 x IN typ.
(A2s)
0.0093
0.045
0.081
0.18
0.2
0.37
0.64
1.1
2.3
4.5
7.8
13
23
40
Agency
Approvals
x
x
x
x
x
x
x
x
x
x
x
x
x
x
* Physical Marking on top of the device
Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/398.html for current information.
191
Revised: Jan 12, 2009
398 Series
Fuses
Introduction toRadial
CircuitLead
Protection
TE5® > Medium Time-LagTransientology
> 398 Series
0.250A
0.315A
0.400A
0.500A
0.630A
0.800A
1.00A
1.25A
1.60A
2.00A
2.50A
3.15A
4.00A
Average Time Current Curves
0.125A
Temperature Rerating Curve
100000
10000
TIME IN SECONDS
1000
100
10
1
0.100
0.010
0.001
0.20
1
10
100
1000
CURRENT IN AMPERES
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
Lead-Free Recommendation
Preheat:
200
(Depends on Flux Activation Temperature)
180
160
140
120
100
80
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
60
40
Recommended Hand-Solder Parameters:
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Time (Seconds)
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Cooling Time
Preheat Time
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
398 Series
192
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/398.html for current information.
Radial Lead Fuses
TE5® > Medium Time-Lag > 398 Series
Product Characteristics
Base/Cap: Brown Thermoplastic
Polyamide PA 6.6, UL 94V-0
Round Pins: Copper, Tin-plated
Materials
Lead Pull Strength
10N (EN 60068-2-21)
Solderability
260ºC, ≤ 3s. (Wave)
350ºC, ≤ 1s. (Soldering Iron)
Soldering Heat
Resistance
260ºC, 10s. (IEC 60068-2-20)
350ºC, 3s. (Soldering Iron)
Operating Temperature
-40ºC to +85ºC (consider de-rating)
Climatic Category
-40ºC to +85ºC/21 days
(EN 60068-1,-2-1,-2-2,-78)
Stock Conditions
+10ºC to +60ºC RH,
≤ 75% yearly average, without dew,
maximum value for 30 days-95%
Vibration Resistance
24 cycles at 15 min. each
(EN 60068-6)
10 - 60 Hz at 0.75 mm amplitude
60 - 2000 Hz at 10 g acceleration
Part Numbering System
Dimensions
max. 4
5,08
1,5
398 Series
… 0,6
0,5 min
Series
Packaging Code
1 +0,1
18,8
max. 8
8,5
Holes in PCB
Dimensions (mm)
Packaging
Packaging Option
398 Series
Tape & Ammopack
Packaging Specification
Quantity
Quantity &
Packaging Code
Reel Size
N/A
1,400
000
N/A
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/398.html for current information.
193
398 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
194
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Radial Lead Fuses
TE5® > Time-Lag > 399 Series
399 Series,
TE5®, Inrush Protector Fuse
Description
The 399 Series are TE5®, time-Lag type, 65V rated
fuses. For Short Circuit Protection of Sensitive Electronic
Components and Assemblies.
Features
t 3FEVDFE1$#TQBDF
requirements
t 'MBNFSFTJTUBOU
encapsulated casing
t )JHIMZEFmOFEDVUPGG
times
t )BMPHFOGSFF
t -PXJOUFSOBMSFTJTUBODF
Agency Approvals
Agency
t "WBJMBCMFGSPNN"
to 4A
t *SSFWFSTJCMFQIZTJDBM
separation
Agency File Number
Ampere Range
E67006
125mA - 4A
Applications
399 Series
t *$$IJQ1SPUFDUJPO
Electrical Characteristics
% of Ampere
Rating
Opening Time
300
20 Seconds, Max.
Electrical Characteristics
Amp Code
Rated
Current
Marking
Code*
Voltage
Rating
0125
0160
0200
0250
0315
0400
0500
0630
0800
1100
1125
1160
1200
1250
1315
1400
125 mA
160 mA
200 mA
250 mA
315 mA
400 mA
500 mA
630 mA
800 mA
1.00 A
1.25 A
1.60 A
2.00 A
2.50 A
3.15 A
4.00 A
IP13
IP16
IP20
IP25
IP32
IP40
IP50
IP63
IP80
IP100
IP125
IP160
IP200
IP250
IP315
IP400
65 V
65 V
65 V
65 V
65 V
65 V
65 V
65 V
65 V
65 V
65 V
65 V
65 V
65 V
65 V
65 V
Power
Disspation
1.0 x IN
max. (mW)
Melting
Integral
10 x IN
typ. (A2s)
Agency
Approvals
Breaking Capacity
Cold
Resistance
0.1 x IN
typ. (mΩ)
50A / 65 VAC/DC
50-60 Hz cosϕ=1.0
1600
1100
775
550
330
265
190
130
92
65
47
33
23
17
13
10
125
140
155
170
190
220
240
265
300
330
370
420
460
520
580
650
0.13
0.2
0.29
0.42
0.62
0.92
1.4
2
3
4.3
6.5
9.8
14
20
40
75
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
* Physical Marking on top of the device
Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/399.html for current information.
195
Revised: Jan 12, 2009
399 Series
Fuses
Introduction toRadial
CircuitLead
Protection
TE5® > Time-LagTransientology
> 399 Series
Average Time Current Curves
0.125A
0.160A
0.200A
0.250A
0.315A
0.400A
0.500A
0.630A
0.800A
1.00A
1.25A
1.60A
2.00A
2.50A
3.15A
4.00A
Temperature Rerating Curve
100000
10000
TIME IN SECONDS
1000
100
10
1
0.100
0.010
0.001
0.20
1
10
100
1000
CURRENT IN AMPERES
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
200
Preheat:
180
(Depends on Flux Activation Temperature)
160
140
120
100
80
60
40
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Recommended Hand-Solder Parameters:
Time (Seconds)
Cooling Time
Preheat Time
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
399 Series
196
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/399.html for current information.
Radial Lead Fuses
TE5® > Time-Lag > 399 Series
Product Characteristics
Base/Cap: Brown Thermoplastic
Polyamide PA 6.6, UL 94V-0
Round Pins: Copper, Tin-plated
Materials
Lead Pull Strength
10 N (EN 60068-2-21)
Solderability
260ºC, ≤ 3s. (Wave)
350ºC, ≤ 1s. (Soldering Iron)
Soldering Heat
Resistance
260ºC, 10s. (IEC 60068-2-20)
350ºC, 3s. (Soldering Iron)
Operating Temperature
-40ºC to +85ºC (consider de-rating)
Climatic Category
-40ºC to +85ºC/21 days
(EN 60068-1,-2-1,-2-2,-78)
Stock Conditions
+10 ºC to +60 ºC RH,
≤ 75% yearly average, without dew,
maximum value for 30 days-95%
Vibration Resistance
24 cycles at 15 min. each
(EN 60068-6)
10 - 60 Hz at 0.75 mm amplitude
60 - 2000 Hz at 10 g acceleration
Part Numbering System
Dimensions
max. 4
8,5
1,5
399 Series
5,08
0,5 min
… 0,6
Packaging Code
1 +0,1
18,8
max. 8
Series
Holes in PCB
Packaging
Packaging Option
399 Series
Tape & Ammopack
Packaging Specification
Quantity
Quantity &
Packaging Code
Reel Size
N/A
1,400
000
N/A
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/399.html for current information.
197
399 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
198
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Axial Lead & Cartridge Fuses
PICO® ll > Very Fast-Acting > 251/253 Series
251/253 Series,
PS
E
PICO® II, Very Fast-Acting Fuse
TUV QPL
Description
The PICO® II Very Fast-Acting Fuse is designed to meet an
extensive array of performance characteristics in a
space-saving subminiature package.
Features
t 7FSZGBTUBDUJOH
t 3P)4DPNQMJBOU
t 4NBMMTJ[F
t 8JEFPQFSBUJOH
temperature range
t 8JEFDVSSFOUSBUJOH
range (62mA- 15A)
t -PXUFNQFSBUVSFEF
rating
Applications
Agency Approvals
Agency File Number
Ampere Range
E10480
62mA - 15A
LR 29862
62mA - 15A
PS
E
JET 1896-31007-1001
1A - 5A
TUV
J02037794
500mA - 10A
QPL
FM10
62mA - 15A
t 'MBUoQBOFMEJTQMBZ57
t 1PXFSTVQQMZ
t -$%NPOJUPS
t "VEJP7JEFPTZTUFN
t -$%CBDLMJHIUJOWFSUFS
t -JHIUJOHTZTUFN
t 0GmDFNBDIJOFT
t .FEJDBMFRVJQNFOU
Electrical Characteristics
% of Ampere
Rating
Ampere Rating
Opening Time
100%
1/16–15
4 Hours, Min.
1/16–7
1 Seconds, Max.
200%
10
3 Seconds, Max.
12-15
10 Seconds, Max.
Electrical Characteristics
Max
Nominal
Ampere
Nominal
Ordering Ordering
Amp
Voltage Interrupting
Cold
Rating
Melting
Number Number
Code
Rating
Rating
Resistance 2
(A)
I t (A2 sec)
(Std.)
(Mil.)
(V)
(Ohms)
.062
.125
.250
.375
.500
.750
1.00
1.25
1.50
2.00
2.50
3.00
3.50
4.00
5.00
7.00
10.0
12.0
15.0
.062
.125
.250
.375
.500
.750
001.
1.25
01.5
002.
02.5
003.
03.5
004.
005.
007.
010.
012.
015.
251.062
251.125
251.250
251.375
251.500
251.750
251001.
2511.25
25101.5
251002.
25102.5
251003.
25103.5
251004.
251005.
251007.
251010.
251012.
251015.
253.062
253.125
253.250
253.375
253.500
253.750
253001.
25301.5
253002.
253003.
253004.
253005.
253007.
253010.
253015.
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
32
32
300 amperes
at rated
voltage VDC
50 amperes at
rated voltage
VAC
7.000
1.700
0.665
0.395
0.280
0.175
0.128
0.100
0.0823
0.0473
0.0360
0.0290
0.0240
0.0204
0.0155
0.0105
0.00705
0.0055
0.00446
0.000113
0.00174
0.0116
0.0296
0.0598
0.153
0.256
0.390
0.587
0.405
0.721
1.19
1.58
2.45
4.14
10.4
25.5
45.2
68.8
Agency Approvals
Nom
Voltage
Drop
(mV)
1.4
0.285
0.24
0.215
0.2165
0.176
0.194
0.2
0.21
0.141
0.132
0.131
0.1205
0.114
0.11
0.102
0.1
0.0878
0.071
PS
E
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
TUV QPL
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
251/253 Series
Agency
Secondary protection for space constrained applications
x
x
x
x
x
x
x
x
Note: Higher ampere ratings are available. Please contact Littelfuse Technical Support or your Littelfuse products representative for assistance.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/251.html
or /253.html for current information.
199
Revised: Jan 15, 2009
251/253 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
PICO® ll > Very Fast-Acting > 251/253
Series
0.250A
0.375A
0.50A
0.75A
1.00A
1.25A
1.50A
2.0A
2.5A
3.0A
3.5A
4A
5A
7A
10A
12A
15A
100
0.125A
Average Time Current Curves
0.062A
Temperature Rerating Curve
TIME IN SECONDS
10
1
0.1
Note:
1. Derating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
0.01
Soldering Parameters
0.001
0.05 0.1
Recommended Process Parameters:
Wave Parameter
1
10
100
CURRENT IN AMPERES
1000
Lead-Free Recommendation
Preheat:
(Depends on Flux Activation Temperature)
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
Recommended Hand-Solder Parameters:
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
251/253 Series
200
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/251.html
or /253.html for current information.
Axial Lead & Cartridge Fuses
PICO® ll > Very Fast-Acting > 251/253 Series
Product Characteristics
Materials
Encapsulated, Epoxy-Coated
Body: Pure Tin-coated Copper wire leads
Solderability
MIL-STD-202, Method 208
Lead Pull Force
MIL-STD-202, Method 211, Test Condition
A (will withstand a 7lbs. axial pull test)
Fuses To MIL SPEC
251/253 Series is available in FM10 on
QPL for MIL-PRF-23419. To order, change
251 to 253
Operating Temperature
–55ºC to +125ºC
Shock
MIL-STD-202, Method 213, Test
Condition I (100 G’s peak for 6
milliseconds)
Vibration
MIL-STD-202, Method 201 (10–55
Hz); Method 204, Test Condition C
(55–2000 Hz at 10 G’s Peak)
Moisture Resistance
MIL-STD-202, Method 106
Resistance to Soldering
Heat
Withstands 60 seconds above 200OC
and up to 260ºC, maximum
Flammability Rating
UL 94V–0
Part Numbering System
Dimensions
251 series
27.78
(1.094")
(T1 lead length)
62.7 (2.468")
52.4 (2.062")*
7.11 (.280")
Series
27.78
(1.094")
251 = Standard type
253 = Military type
Current Rating
LF
1A
2.80 (.11")
MAX
5.0 (.197")
6.35 (.25")
tape
0251 xxxx N R T1 L
Refer to Amp Code column of
Electrical Characteristics Table
6.35 (.25")
tape
Quantity
LF
1A
N = 5000
P = 2000
M = 1000
H = 100
Wire Diameter:
0.64 (.025") for 0.62-10.0 amp,
0.81 (.032") for 12-15 amp
Type of Packaging
253 series
83.31 (3.28")
38.1
(1.5")
73.0 (2.874")**
7.11 (.280")
LF
Lead Length
38.1
(1.5")
2.80 (.11")
MAX
LF
The default lead length for Ammo pack and
Loose pack is now T1 for 251 series, and
remains T3 for 253 series, therefore:
T1 = 52.4mm (2.062”), 251 series only*
Blank = 52.4mm (2.062”) for 251 series*
or 73mm (2.874”) for 253 series**
1A
5.0 (.197")
6.35 (.25")
tape
251/253 Series
R = Reel
A = Ammo Pack
X = Loose Pack
(T3 lead length)
6.35 (.25")
tape
1A
RoHS
Wire Diameter:
0.64 (.025") for 0.62-10.0 amp,
0.81 (.032") for 15 amp
Packaging
Packaging Option
Packaging Specification
*T1: 52.4mm (2.062") Tape and Reel
EIA 296
**T3: 73mm (2.874') Tape and Reel
EIA 296
Quantity &
Packaging Code
Please refer to available quantities
above in "Part Numbering System”
The default lead length for both ammo pack and loose pack is T1 for 251 and is T3 for 253.
Notes:
* T1 dimension is defined as the length of the component between the two tapes. The full component length is 62.7mm (2.468"). T1 length is for 251 series only.
** T3 dimension is defined as the length of the component between the two tapes. The full component length is 83.3.7mm (3.28”). T3 length is for 253 series only.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/251.html
or /253.html for current information.
201
251/253 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
202
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Axial Lead & Cartridge Fuses
PICO® > Very Fast-Acting > 275 Series
275 Series,
PICO®, Very Fast-Acting Fuse
Description
The PICO® Very Fast-Acting Fuse is designed to meet an
extensive array of performance characteristics in a
space-saving subminiature package.
Features
t 7FSZGBTUBDUJOH
t 3P)4DPNQMJBOU
t 4NBMMTJ[F
t 8JEFPQFSBUJOH
temperature range
t )JHIDVSSFOUSBUJOH
(20A- 30A)
Applications
Agency Approvals
Agency
t -PXUFNQFSBUVSFEF
rating
Agency File Number
Ampere Range
E10480
20A - 30A
t 1PXFSTVQQMZ
t /FUXPSLJOHFRVJQNFOU
t 1$TFSWFS
t 4UPSBHFTZTUFN
Electrical Characteristics
% of Ampere
Rating
Ampere Rating
100%
20 - 30
4 Hours, Min.
200%
20 - 30
10 Seconds, Max.
Opening Time
Electrical Characteristics
Max
Voltage
Rating
(V)
20.0
020.
0275020.
32
25.0
025.
0275025.
32
30.0
030.
0275030.
32
Interrupting
Rating
300 amperes @ rated voltage
VDC
100 amperes @ rated voltage
VAC
Agency
Approvals
Nominal Cold
Resistance
(Ohms)
Nominal
Melting
I2t (A2 sec)
0.0031
115
x
0.0026
192
x
0.0020
288
x
275 Series
Amp Code
Ordering
Number
Ampere
Rating
(A)
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/275.html
for current information.
203
Revised: Mar 4, 2009
275 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
PICO® > Very Fast-Acting
> 275 Series
Average Time Current Curves
20A
25A
30A
Temperature Rerating Curve
100
TIME IN SECONDS
10
1
0.1
Note:
1. Derating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
0.01
Soldering Parameters
0.001
0.05 0.1
Recommended Process Parameters:
Wave Parameter
Lead-Free Recommendation
1
10
100
CURRENT IN AMPERES
1000
Preheat:
(Depends on Flux Activation Temperature)
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
Recommended Hand-Solder Parameters:
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
275 Series
204
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series275.html
for current information.
Axial Lead & Cartridge Fuses
PICO® > Very Fast-Acting > 275 Series
Product Characteristics
Materials
Transparent sleeve covered body,
Pure Tin-coated copper wire leads
Solderability
MIL-STD-202, Method 208
MIL-STD-202, Method 211, Test Condition
A (will withstand a 5lbs. axial pull test)
Lead Pull Force
Operating Temperature
–55ºC to +125ºC
Shock
MIL-STD-202, Method 213, Test
Condition I (100 G’s peak for 6
milliseconds) and per method 2028
(78G’s peak for 11 milliseconds)
Vibration
MIL-STD-202, Method 201 (10–55
Hz); Method 204, Test Condition D
(Vibrations of 10-2000 cps at 20 G’s)
Moisture Resistance
MIL-STD-202, Method 106
Part Numbering System
Dimensions
0275 xxxx M R T1 L
275 000 Series
B
A
Series
B
275
C
DIA.
3/4 A
D
Current Rating
Refer to Amp Code column of
Electrical Characteristics Table
Transparent
Insulating Sleeve
Quantity
M = 1000
V =5
Amperage
20 - 30
Type of Packaging
Dimensions in mm (inches)
A
7.87
(.31")
B
27.78
(1.094")
C
3.38
(.133")
R = Reel
X = Loose Pack
D
1.016
(.040")
Lead Length
T1 = 52.4mm (2.062”)
Blank = For Loose pack (MXL,VXL)
RoHS
275 Series
Only RoHS parts are available for
275 Series
Packaging
Packaging Option
T1: 52.4mm (2.062") Tape and Reel
Packaging Specification
Quantity &
Packaging Code
EIA 296
Please refer to available quantities above in “Part
Numbering System”
The default lead length for loose pack is T1.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/275.html
for current information.
205
275 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
206
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Axial Lead & Cartridge Fuses
PICO® ll > Very Fast-Acting > 263 Series
263 Series,
®
PICO
PS
E
II 250 Volt, Very Fast-Acting Fuse
Description
The PICO® II 263 Series Fuse is a specially designed
axial leaded fuse that achieves a 250V rating in a small
package.
Features
t 7SBUJOH
t 3P)4DPNQMJBOU
t 7FSZGBTUoBDUJOH
t 8JEFPQFSBUJOH
temperature range
t 4NBMMTJ[F
t -PXUFNQFSBUVSF
t 8JEFSBOHFPGDVSSFOU
de-rating
rating available (62mA to
5A)
Agency Approvals
Applications
Agency
Agency File Number
Ampere Range
E10480
62mA - 5A
JET 1896-31007-1001
1A - 5A
t -JHIUJOHTZTUFN
PS
E
LR 29862
125mA - 5A
t 1PXFSTVQQMZ
t 0GmDFBVUPNBUJPO
machines
t -$%1%157
t "VEJP7JEFPTZTUFN
t -$%NPOJUPS
t .FEJDBMFRVJQNFOU
Electrical Characteristics
% of Ampere
Rating
Opening Time
100%
4 Hours, Min.
200%
1 Second, Max.
300%
0.1 Second, Max.
Ampere
Rating
(A)
Amp Code
0.062
0.125
0.250
0.375
0.500
0.750
1.00
1.50
2.00
2.50
3.00
3.50
4.00
5.00
.062
.125
.250
.375
.500
.750
001.
01.5
002.
02.5
003.
03.5
004.
005.
Max
Voltage
Rating
(V)
250
250
250
250
250
250
250
250
250
250
250
250
250
250
Interrupting
Rating
50 amperes
at 250 VAC
PSE: 100
amperes
at 125 VAC.
Nominal Cold
Resistance
(Ohms)
Nominal
Melting
I2t (A2 sec)
Nom
Voltage Drop
(mV)
5.50
1.75
0.715
0.391
0.252
0.150
0.105
0.0635
0.0444
0.0340
0.0274
0.0224
0.0193
0.0145
0.000192
0.00251
0.0165
0.0444
0.1125
0.0411
0.087
0.398
0.74
1.197
1.77
2.33
3.08
5.55
0.74
0.3
0.235
0.195
0.17
0.176
0.165
0.148
0.137
0.128
0.1225
0.1175
0.1125
0.1065
263 Series
Electrical Characteristics
Agency Approvals
PS
E
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/263.html for current information.
207
Revised: Jan 12, 2009
263 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
PICO® ll > Very Fast-Acting
> 263 Series
3/8A
1/2A
3/4A
1A
1 1/2A
2A
2 1/2A
3A
3 1/2A
4A
5A
1/4A
1/8A
Average Time Current Curves
1/16A
Temperature Rerating Curve
100
TIME IN SECONDS
10
1
0.1
Note:
1. Derating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
0.01
Soldering Parameters
0.001
0.05 0.1
Recommended Process Parameters:
Wave Parameter
1
10
CURRENT IN AMPERES
100
Lead-Free Recommendation
Preheat:
(Depends on Flux Activation Temperature)
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
Recommended Hand-Solder Parameters:
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
263 Series
208
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/263.html for current information.
Axial Lead & Cartridge Fuses
PICO® ll > Very Fast-Acting > 263 Series
Product Characteristics
Materials
Encapsulated, Epoxy-Coated
Body: Solder Coated Copper Leads.
RoHS compliant
Product: Pure Tin–coated Copper wire
leads
Solderability
MIL-STD-202. Method 208.
Product Marking
Body marking, current rating and logo
Insulation Resistance
(After Opening):
Operating
Temperature
–55ºC to +125ºC
Resistance to Soldering
Heat
Shock
MIL-STD-202, Method 213, Test Condition
I (100 G’s peak for 6 milliseconds)
Thermal Shock
Vibration
Salt Spray
Moisture Resistance
MIL-STD-202, Method 106
Lead Pull Force
MIL-STD-202, Method 211,
Test Condition A (will withstand 7 lb.
axial pull test)
Part Numbering System
Dimensions
0263 xxxx W R T1 L
62.7 (2.468")
27.78
(1.094")
0.64 (.025")
6.35 (.25")
tape
MIL-STD-202, Method 201 (10–55
Hz); MIL-STD-202, Method 204, Test
Condition C (55–2000 Hz at 10 G’s
Peak)
MIL-STD-202, Method 101,
Test Condition B (48 hrs.)
MIL-STD-202, Method 302,
Test Condition A (10,000 ohms
minimum at 100 volts)
MIL-STD-202, Method 210,
Test Condition C (10 sec. at 260ºC)
MIL-STD-202, Method 107, Test
Condition B (–55ºC to 125ºC)
52.4 (2.062")*
7.11 (.280")
LF
3 1/2 A
250 V
27.78
(1.094")
3.94 (.16")
MAX
Series
Current Rating
Refer to Amp Code column of
Electrical Characteristics Table
6.35 (.25")
tape
5.0 (.197")
LF
3 1/2 A
250 V
Quantity
W = 3000
M = 1000
H = 100
Type of Packaging
263 Series
R = Reel
A = Ammo Pack
X = Loose Pack
Lead Length
T1: 52.4mm (2.062”)*
RoHS
Packaging
Packaging Option
Packaging Specification
T1: 52.4mm (2.062”)
Tape and Reel
EIA 296
Quantity
Quantity &
Packaging Code
Please refer to available quantities
above in “Part Numbering System”
Notes: * T1 dimension is defined as the length of the component between the two tapes. The full component length is 62.7mm (2.468").
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/263.html for current information.
209
263 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
210
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Axial Lead & Cartridge Fuses
PICO® ll > Time-Lag > 471 Series
471 Series,
®
PICO
PS
E
II, Time-Lag Fuse
Description
The 471 Series PICO® II Time-Lag Fuse is designed for
applications that require moderate in–rush withstand
and is in a space-saving subminiature package.
Features
t 3P)4DPNQMJBOU
t 4NBMMTJ[F
t 8JEFPQFSBUJOH
temperature range
t )BMPHFOGSFFBWBJMBCMF
t 8JEFSBOHFPGDVSSFOU
ratings available
(500mA to 5A)
Agency Approvals
Agency
t .PEFSBUFJOoSVTI
withstand
Agency File Number
Ampere Range
E10480
500mA - 5A
LR 29862
500mA - 2.5A
JET 1896-31007-1001
1A - 5A
t -PXUFNQFSBUVSF
de-rating
Applications
t 'MBUoQBOFMEJTQMBZ57
t .FEJDBMFRVJQNFOU
t -$%NPOJUPS
t *OEVTUSJBMFRVJQNFOU
t -JHIUJOHTZTUFN
PS
E
% of Ampere
Rating
Opening Time
100%
4 Hours, Min.
200%
120 Seconds, Max.
Electrical Characteristics
Ampere
Rating
(A)
Amp
Code
Max
Voltage
Rating
(V)
.500
.500
1.00
Nom
Voltage
Drop
(mV)
Agency Approvals
Nominal
Cold
Resistance
(Ohms)
Nominal
Melting
I2t (A2 sec)
125
0.189
0.159
X
X
001.
125
0.085
0.722
X
X
X
1.50
01.5
125
0.054
1.610
X
X
X
2.00
002.
125
0.039
2.500
X
X
X
X
X
Interrupting
Rating
50 amperes at 125 VAC
and VDC
PS
E
2.50
02.5
125
0.030
4.390
X
3.00
003.
125
0.023
6.960
X
X
4.00
004.
125
0.012
10.600
X
X
5.00
005.
125
0.008
15.400
X
X
471 Series
Electrical Characteristics
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/471.html for current information.
211
Revised: June 1, 2009
471 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
PICO® ll > Time-Lag
> 471 Series
100
1A
1.5A
2A
2.5A
3A
4A
5A
Average Time Current Curves
0.5A
Temperature Rerating Curve
TIME IN SECONDS
10
1
0.1
0.01
Note:
1. Derating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
0.001
0.1
Soldering Parameters
1
10
100
CURRENT IN AMPERES
1000
Recommended Process Parameters:
Wave Parameter
Lead-Free Recommendation
Preheat:
(Depends on Flux Activation Temperature)
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
Recommended Hand-Solder Parameters:
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
471 Series
212
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/471.html for current information.
Axial Lead & Cartridge Fuses
PICO® ll > Time-Lag > 471 Series
Product Characteristics
Encapsulated, Epoxy-Coated Body;
Solder Coated Copper wire leads;
RoHS compliant Product: Pure Tin-coated
Copper wire leads
Materials
Flammability
Rating
UL 94V-0
Solderability
MIL-STD-202, Method 208
Lead Pull Force
MIL-STD-202, Method 211, Test Condition
A (will withstand a 7 lbs. axial pull test)
Operating Temperature
–55ºC to +125ºC
Shock
MIL-STD-202, Method 213, Test
Condition I (100 G’s peak for 6
milliseconds)
Vibration
MIL-STD-202, Method 201 (10–55
Hz); Method 204, Test Condition C
(55–2000 Hz at 10 G’s Peak)
Moisture Resistance
MIL-STD-202, Method 106
Resistance to Soldering
Heat
Withstands 60 seconds above
200ºC and up to 260ºC, maximum
Part Numbering System
Dimensions
471 Series (RoHS Version) Markings
0471 xxxx N R T1 L
62.7 (2.468")
27.78
(1.094")
52.4 (2.062")*
7.11 (.280")
0.64 (.025")
1A
6.35 (.25")
tape
27.78
(1.094")
2.8 (.110")
MAX
Series
LF
Current Rating
Refer to Amp Code column of
Electrical Characteristics Table
6.35 (.25")
tape
5.0 (.197")
T
Quantity
1A
N = 5000
P = 2000
Type of Packaging
471 Series (RoHS and Halogen-free Version) Markings
R = Reel
A = Ammo Pack
62.7 (2.468")
27.78
(1.094")
52.4 (2.062")*
7.11 (.280")
0.64 (.025")
LF
27.78
(1.094")
2.8 (.110")
MAX
Lead Length
T1: 52.4mm (2.062”)*
1A
Option Codes
6.35 (.25")
tape
5.0 (.197")
T
L = RoHS
HF = RoHS and Halogen-free
1A
471 Series
6.35 (.25")
tape
Packaging
Packaging Option
Packaging Specification
Quantity &
Packaging Code
*T1: 52.4mm (2.062") Tape and Reel
EIA 296
Please refer to available quantities
above in "Part Numbering System”
Notes: * T1 dimension is defined as the length of the component between the two tapes. The full component length is 62.7mm (2.468").
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/471.html for current information.
213
471 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
214
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Axial Lead & Cartridge Fuses
PICO® ll > Time-Lag > 472 Series
472 Series,
®
PICO
II, Time-Lag Fuse
Description
The 472 Series PICO® II, 125V rated time-Lag fuse is
designed for applications that require moderate in-rush
withstand and is in a space-saving subminature package.
Features
t.PEFSBUFJOoSVTI
withstand
t 3P)4DPNQMJBOU
t 8JEFPQFSBUJOH
temperature range
t 4NBMMTJ[F
t 8JEFSBOHFPGDVSSFOU
ratings available
(500mA to 5A)
Agency Approvals
Agency
Agency File Number
Ampere Range
E10480
500mA - 5A
t -PXUFNQFSBUVSF
de-rating
Applications
t 'MBUoQBOFMEJTQMBZ57
t 1PXFS4VQQMZ
t -JHIUJOH
t "VEJP7JEFP
Equipment
t (BNF$POTPMF
% of Ampere
Rating
Opening Time
100%
4 Hours, Min.
200%
120 Seconds, Max.
Electrical Characteristics
Agency
Approvals
Ampere Rating
(A)
Amp Code
Max
Voltage Rating
(V)
.500
.500
125
0.174
0.1927
x
1.00
001.
125
0.078
0.9384
x
1.50
01.5
125
0.039
2.4081
x
2.00
002.
125
0.027
4.2363
x
Interrupting
Rating
50 amperes at
125 VAC and VDC
Nominal Cold
Resistance
(Ohms)
Nominal Melting
I2t (A2 sec)
2.50
02.5
125
0.0209
7.0838
x
3.00
003.
125
0.0187
9.3600
x
5.00
005.
125
0.0084
45.9000
x
472 Series
Electrical Characteristics
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/472.html for current information.
215
Revised: Jan 12, 2009
472 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
PICO® ll > Time-Lag
> 472 Series
5.0A
100
1.0A
1.5A
2.0A
2.5A
3.0A
Average Time Current Curves
0.5A
Temperature Rerating Curve
TIME IN SECONDS
10
1
0.1
0.01
Note:
1. Derating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
0.001
0.1
Soldering Parameters
10
100
1000
CURRENT IN AMPERES
Recommended Process Parameters:
Wave Parameter
1
Lead-Free Recommendation
Preheat:
(Depends on Flux Activation Temperature)
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
Recommended Hand-Solder Parameters:
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
472 Series
216
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/472.html for current information.
Axial Lead & Cartridge Fuses
PICO® ll > Time-Lag > 472 Series
Product Characteristics
Material
Body: Ceramic
Leads: Tin-coated Copper
Encapsulated: Epoxy-Coated Body
Product Marking
Body: Brand Logo, Current Rating,
T (time Lag fuse)
Solderability
MIL-STD-202, Method 208
Lead Pull Force
MIL-STD-202, Method 211, Test Condition
A (will Withstand a 7lbs. Axial pull test)
Dimensions
Operating
Temperature
–55ºC to +125ºC with proper de–rating
Thermal Shock
MIL-STD-202, Method 213, Test Condition I
(100 G’s peak for 6 milliseconds)
Vibration
MIL-STD-202, Method 201 (10-55 Hz); Method
204, Test Condition C (55-2000 Hz at 10 G’s
Peak)
Part Numbering System
0472 xxxx N R T1 L
62.7 (2.468")
52.4 (2.062")*
27.78
(1.094")
7.11 (.280")
Series
2.80 (.11")
0.64 (.025")
1A
6.35 (.25")
tape
27.78
(1.094")
LF
Current Rating
Refer to Amp Code column of
Electrical Characteristics Table
6.35 (.25")
tape
5.0 (.197")
T
Quantity
2A
N = 5000
M = 1000
472 series markings
Type of Packaging
Coating Diameter (max): 0.5A-3.0A: 2.80mm
5.0A: 2.90mm
R = Reel
A = Ammo Pack
X = Loose Pack
Lead Length
T1: 52.4mm (2.062”)*
RoHS
Packaging Option
Packaging Specification
*T1: 52.4mm (2.062”)
Tape and Reel
EIA 296
Quantity
472 Series
Packaging
Quantity &
Packaging Code
Refer to the tables in
Part Numbering System above
Notes: * T1 dimension is defined as the length of the component between the two tapes. The full component length is 62.7mm (2.468").
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/472.html for current information.
217
472 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
218
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Axial Lead & Cartridge Fuses
PICO® ll > Slo-Blo® > 473 Series
473 Series,
®
PICO
®
II, Slo-Blo
PS
E
Fuse
Description
The PICO® II Slo-Blo® Fuse combines time-delay
performance characteristics with the proven reliability of
a PICO® Fuse.
Features
t&OIBODFEJOSVTI
withstand
t 3P)4DPNQMJBOU
t 4NBMMTJ[F
t 8JEFPQFSBUJOH
temperature range
t 8JEFSBOHFPGDVSSFOU
ratings (375mA - 7A)
t -PXUFNQFSBUVSF
de-rating)
Agency Approvals
Applications
PS
E
Agency File Number
Ampere Range
E10480
375mA - 7A
LR 29862
375mA - 7A
JET 1896-31007-1001
1A - 5A
t'MBUoQBOFM%JTQMBZ57
t.FEJDBMFRVJQNFOU
t-$%NPOJUPS
t*OEVTUSJBMFRVJQNFOU
t-JHIUJOHTZTUFN
Electrical Characteristics
% of Ampere
Rating
Opening Time
100%
4 Hours, Min.
200%
1 Sec., Min.; 60 Sec., Max.
300%
0.2 Sec., Min.; 3 Sec., Max.
800%
0.02 Sec., Min.; 0.1 Sec., Max.
Electrical Characteristics
Ampere
Rating
(A)
Amp
Code
0.375
0.500
0.750
1.00
1.50
2.00
2.25
2.50
3.00
3.50
4.00
5.00
7.00
.375
.500
.750
001.
01.5
002.
2.25
02.5
003.
03.5
004.
005.
007.
Max
Voltage
Rating
(V)
125
125
125
125
125
125
125
125
125
125
125
125
125
Interrupting
Rating
Nominal Cold
Resistance
(Ohms)
Nominal
Melting
I2t (A2 sec)
Nom
Voltage Drop
(mV)
50 amperes at 125 VDC/
VAC
1.7400
1.1300
0.4600
0.2670
0.1160
0.0712
0.0630
0.0520
0.0380
0.0240
0.0194
0.0133
0.0092
0.085
0.210
0.760
2.010
3.940
7.600
9.280
13.00
21.00
26.80
35.00
54.80
105.00
0.840
0.775
0.429
0.353
0.208
0.180
0.164
0.153
0.140
0.094
0.086
0.074
0.070
Agency Approvals
PS
E
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
473 Series
Agency
X
X
X
X
X
X
X
X
X
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/473.html for current information.
219
Revised: Jan 12, 2009
473 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
®
PICO® ll > Slo-BloTransientology
> 473 Series
Average Time Current Curves
.375A
.50A
.75A
1.0A
1.5A
2.0A
2.5A
3.0A
3.5A
4.0A
5.0A
7.0A
Temperature Rerating Curve
1000
TIME IN SECONDS
100
10
1
Note:
1. Derating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
0.1
Soldering Parameters
0.01
0.1
Recommended Process Parameters:
Wave Parameter
1
10
100
CURRENT IN AMPERES
1000
Lead-Free Recommendation
Preheat:
(Depends on Flux Activation Temperature)
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
Recommended Hand-Solder Parameters:
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
473 Series
220
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/473.html for current information.
Axial Lead & Cartridge Fuses
PICO® ll > Slo-Blo® > 473 Series
Product Characteristics
Materials
Encapsulated, Epoxy-Coated Body;
Solder Coated Copper wire leads;
RoHS compliant Product: Pure Tin-coated
Copper wire leads
Vibration
MIL-STD-202, Method 201 (10–55
Hz); MIL-STD-202, Method 204, Test
Condition C (55–2000 Hz at 10 G’s
Peak)
Solderability
MIL-STD-202, Method 208
Salt Spray
Lead Pull Force
MIL-STD-202, Method 211, Test Condition
A (will withstand 7 lbs. axial pull test)
MIL-STD-202, Method 101, Test
Condition B
Operating
Temperature
Insulation Resistance
(After Opening):
MIL-STD-202, Method 302, (10,000
ohms minimum at 100 volts)
–55ºC to +125ºC
MIL-STD-202, Method 210, Test
Condition C (20 sec at 260ºC)
Shock
MIL-STD-202, Method 213, Test Condition
I (100 G’s peak for 6 milliseconds)
Resistance to Soldering
Heat
Thermal Shock
MIL-STD-202, Method 107, Test
Condition B (–65ºC to 125ºC)
Moisture Resistance
MIL-STD-202, Method 106 (90–98%
RH), Heat (65ºC)
Dimensions
Part Numbering System
0473 xxxx Y R T1 L
62.7 (2.468")
27.78
(1.094")
52.4 (2.062")*
7.11 (.280")
0.64 (.025")
6.35 (.25")
tape
LF
1A
27.78
(1.094")
Series
3.43 (.135")
MAX
Current Rating
Refer to Amp Code column of
Electrical Characteristics Table
6.35 (.25")
tape
5.0 (.197")
LF
Quantity
Y = 4000
P = 2000
M = 1000
1A
473 series markings
Type of Packaging
R = Reel
A = Ammo Pack
X = Loose Pack
473 Series
Lead Length
T1: 52.4mm (2.062”)*
RoHS
Packaging
Packaging Option
Packaging Specification
Quantity &
Packaging Code
*T1: 52.4mm (2.062") Tape and Reel
EIA 296
Please refer to available quantities
above in "Part Numbering System”
Notes: * T1 dimension is defined as the length of the component between the two tapes. The full component length is 62.7mm (2.468").
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/473.html for current information.
221
473 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
222
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Axial Lead & Cartridge Fuses
PICO® > Very Fast Acting > 265/266/267 Series
265/266/267 Series,
®
QPL
PICO , Very Fast-Acting Fuse (High-Reliability)
Description
The 265/266/267 Series are high–reliability PICO® Fuses,
that are very fast-acting, with an insulating sleeve.
These fuses provide supplemental protection in enduse equipment to provide protection for components
or internal circuits. They are not suitable for branch or
feeder circuit use. The Military version of the 265 Series
(except 1/16 ampere rating) is available in FM08A on
QPL for MIL-PRF-23419/8. To order, change 265 to 267.
Features
t .JMJUBSZHSBEFBWBJMBCMF
Agency Approvals
Agency
t "WBJMBCMFJOBYJBMBOE
radial leaded
t 3P)4DPNQMJBOU
Agency File Number
Ampere Range
E10480
062mA - 15A
LR 29862
062mA - 10A
FM08A
062mA - 10A
QPL
t "WBJMBCMFJONJOJBUVSF
and subminiature
formats
t "WBJMBCMFGSPNN"
to 15A
Electrical Characteristics
% of Ampere
Rating
Ampere Rating
Opening Time
100%
1/16–15
4 Hours, Min.
1/16–7
1 Second, Max.
10
3 Second, Max.
15
10 Second, Max.
200%
Ampere
Rating
(A)
Amp Code
Max
Voltage Rating
(V)
0.062
0.125
0.250
0.375
0.500
0.750
1.00
1.50
2.00
2.50
3.00
4.00
5.00
7.00
10.0
15.0
.062
.125
.250
.375
.500
.750
001.
01.5
002.
02.5
003.
004.
005.
007.
010.
015.
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
32
Interrupting
Rating
Agency Approvals
Nominal Cold
Resistance (Ohms)
300 amperes at rated voltage VDC
50 amperes at rated voltage VAC
7.0000
2.1000
0.7100
0.4200
0.2800
0.1700
0.1250
0.0800
0.0550
0.0420
0.03515
0.0230
0.0140
0.0100
0.00645
0.0040
QPL
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
265/266/267
Electrical Characteristics
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/265.html /
266.html/or /267.html for current information.
223
Revised: Jan 12, 2009
265/266/267 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
PICO® > Very Fast Acting > 265/266/267
Series
1/8A
1000
1/4A
3/8A
1/2A
3/4A
1A
1 1/2A
2A
2 1/2A
3A
4A
5A
7A
10A
15A
Average Time Current Curves
1/16A
Temperature Rerating Curve
100
TIME IN SECONDS
10
Note:
1. Derating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
1
0.1
0.01
0.1
1
10
CURRENT IN AMPERES
100
1000
Soldering Parameters\
Recommended Process Parameters:
280
260
Wave Parameter
240
220
Preheat:
200
(Depends on Flux Activation Temperature)
180
160
140
120
80
60
40
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
100
Solder Pot Temperature:
280° C Maximum
Solder Dwell Time:
2-5 seconds
Recommended Hand-Solder Parameters:
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Time (Seconds)
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Cooling Time
Preheat Time
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
265/266/267 Series
224
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/265.html /
266.html/or /267.html for current information.
Axial Lead & Cartridge Fuses
PICO® > Very Fast Acting > 265/266/267 Series
Product Characteristics
Materials
Body: White Thermoplastic
Gold-Plated Copper Leads, Type II
Operating Temperature
–55ºC to +125ºC
Weight
.32 Grams
Shock
Solderability
MIL-STD-202, Method 208
MIL-STD-202, Method 213, Test
Condition I (100 G’s peak for 6
milliseconds).
Vibration
Lead Pull Force
MIL-STD-202, Method 211, Test
Condition A (will withstand a 5 lbs. axial
pull test)
AQL (Electrical Characteristics): Certified
to 1% AQL
MIL-STD-202, Method 201 (10–55
Hz); MIL-STD-202, Method 204, Test
Condition C (55–2000 Hz at 10 G’s
Peak)
Salt Spray
MIL-STD-202, Method 101, Test
Condition B
Seal Test
MIL-STD-202, Method 112, Test
Condition A
Insulation Resistance
(After Opening)
MIL-STD-202, Method 302, Test
Condition A (1/2 Megohm minimum)
Special screening tests, burn-in, etc. can
be supplied on special order to meet
specific requirements. For information on
higher current ratings, contact Littelfuse.
Thermal Shock
MIL-STD-202, Method 107, Test
Condition B (–65°C to 125°C).
Moisture Resistance
MIL-STD-202, Method 106
267 series fuses are offered with
optional solder coated leads. To order,
enter XT as the end suffix (see Part
Numbering System section)
Fuses To MIL SPEC
265 Series (except 1/16 ampere
rating) is available in FM08A on
QPL for MIL-PRF-23419/8. To order,
change 265 to 267
Per MIL-STD-105, Inspection Level II.
Traceability and Identification Records:
Controlled by lot number and retained on
file for a minimum of three years. Copies
of Lot Certification Test data available
when requested with order
Sampling
Options
Dimensions
Part Numbering System
265 000 Series
7.11
(.28")
0267 xxxx V XT
38.1
(1.50")
Series
2.36 (.093")
DIA.
3/4 A
Amp Code
Refer to Amp Code column of
Electrical Characteristics Table
Transparent
Insulating Sleeve
Quantity & Packaging Code
266 000 Series
V
8.38 (.33) (Note 1)
7.11 (.28")
2.36 (.093")
DIA.
90
3/4 A
= (All series) 5 quantity bulk pack
Lead Option Code
Blank = (All series) standard lead
XT = (267 series only) solder coated lead option
37.33
(1.47")
Transparent
Insulating Sleeve
265/266/267
38.1
(1.50")
(Note 1: 9.14 (.36") for 15 amp rating)
Packaging
Packaging Option
Quantity
Quantity &
Packaging Code
Bulk Pack
5
V
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/265.html /
266.html/or /267.html for current information.
225
265/266/267 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
226
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Axial Lead & Cartridge Fuses
PICO® ll > Very Fast Acting > 316 Series
316 Series
®
PICO II, Very Fast-Acting Fuse
Description
The 316 Series PICO® II Very Fast-Acting Fuse is
designed to meet an extensive array of performance
characteristics in a space-saving subminiature package
while complying with the requirements of CCC.
Features
t $$$DFSUJmFE"YJBM
Lead Fuse
t 'VMMZDPNQBUJCMFXJUI
Lead–free solder
alloys and higher
temperature profiles
associated with
Lead–free assembly
Agency Approvals
Agency
Agency File Number
Ampere Range
2007010207241295
0.50mA–5A
t 3P)4DPNQMJBOU
t "WBJMBCMFJOSBUJOHT
of 0.50A, 1.00A,
2.00A, 3.15A and 5.00
amperes
Applications
Electrical Characteristics
t 'MBUoQBOFM%JTQMBZ57
t 1PXFSTVQQMZ
t -$%NPOJUPS
t "VEJP7JEFPTZTUFN
% of Ampere Rating
Opening Time
t -$%CBDLMJHIUJOWFSUFS
t -JHIUJOHTZTUFN
100%
4 Hours, Min.
t 0GmDFNBDIJOFT
t .FEJDBMFRVJQNFOU
200%
5 Seconds, Max.
275%
0.30 Seconds, Max.
400%
0.03 Seconds, Max.
1000%
0.004 Seconds, Max.
Electrical Characteristics
Max
Voltage
Rating
(V)
Ampere
Rating
(A)
Amp Code
0.50
.500
1.00
001.
2.00
002.
125
3.15
3.15
125
5.00
005.
125
Agency
Approvals
Nominal Cold
Resistance
(Ohms)
Nominal
Melting
I2t (A2 sec)
Max Voltage
Drop (mV)
125
0.280
0.0598
0.202
X
125
0.128
0.256
0.186
X
0.0473
0.405
0.158
X
0.0290
1.190
0.160
X
0.0155
4.140
0.110
X
Interrupting
Rating
50A @ 125VAC
50A @ 125VDC
316 Series
Secondary protection for space constrained applications
Notes:
1. Cold resistance measured at less than 10% of rated current at 23°C.
2. Agency Approval Table Key: X=Approved or Certified, P=Pending and Blank=Not Approved
3. Have special electrical characteristic needs? Contact Littelfuse to learn more about application specific options.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/316.html for current information.
227
Revised: Feb 18, 2009
316 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
PICO® ll > Very Fast Acting
> 316 Series
120
100
B
10
B
80
60
1
40
TIME IN SECONDS
PERCENT OF RATING*
3.5 A
5.0 A
100
140
2.0 A
Average Time Current Curves
0.5 A
1.0 A
Temperature Rerating Curve
20
-60°C -40°C -20°C
-76°F -40°F -4°F
0°C
32°F
20°C 40°C
68°F 104°F
60°C 80°C 100°C 120°C
140°F 176°F 212°F 248°F
AMBIENT TEMPERATURE
0.1
0.01
Note:
1. Derating depicted in this curve is in addition to the standard derating of 25% for
continuous operation.
0.001
Soldering Parameters
0.1
1
10
CURRENT IN AMPERES
100
1000
Recommended Process Parameters:
Wave Parameter
Lead-Free Recommendation
Preheat:
(Depends on Flux Activation Temperature)
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
10 Seconds, Maximum
Recommended Hand-Solder Parameters:
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
316 Series
228
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/316.html for current information.
Axial Lead & Cartridge Fuses
PICO® ll > Very Fast Acting > 316 Series
Product Characteristics
Materials
Body: Ceramic
Leads: Tin-coated Copper
Encapsulated: Epoxy-Coated body
Operating
Temperature
–55ºC to +125ºC with proper de-rating
Product Marking
Body: Brand Logo, Current Rating
Certification mark
Shock
MIL-STD-202, Method 213, Test
Condition 1 (100G’s peak for
millisecond)
Lead Pull Force
MIL-STD-202, Method 211, Test Condition
A (will withstand a 7lbs. axial pull test)
Vibration
MIL-STD-202F, Method 201A
(10-55 Hz); Method 204, Test Condition C
Solderability
MIL-STD-202, Method 208
Moisture Resistance
MIL-STD-202, Method 106
Part Numbering System
Dimensions
0316 001. N R T1
62.7 (2.468")
52.4 (2.062")*
27.78
(1.094")
7.11 (.280")
0.64 (.025")
2.80 (.11")
1A
6.35 (.25")
tape
5.0 (.197")
Series
Current Rating
27.78
(1.094")
Refer to Amp Code column of
Electrical Characteristics Table
LF
Quantity Code
6.35 (.25")
tape
front and back markings
N = 5000
Type of Packaging
R = Reel
A = Ammo Pack
epoxy coating
Lead Length
T1: 52.4mm (2.062”)*
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
*T1: 52.4mm (2.062")
Axial Lead
Tape and Reel or Ammo Pack
EIA 296
5000
NAT1 = 5000 Ammo Pack T1
NRT1 = 5000 Tape & Reel T1
316 Series
Packaging
Notes: * T1 dimension is defined as the length of the component between the two tapes. The full component length is 62.7mm (2.468").
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/316.html for current information.
229
316 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
230
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Axial Lead & Cartridge Fuses
3.6 X 10 mm > Fast-Acting > 874 Series
874 Series Fuse,
Lead-free 3.6 x 10 mm, Fast–Acting Fuse
Description
Single Pigtail Axial Lead 3.6 x 10mm Fast-Acting Fuse
Features
Agency
Agency File Number
Agency Approvals E10480
t %FTJHOFEUP6-$4"
248 Standard
t 4JOHMF1JHUBJM"YJBM
Lead format
t 'BTU"DUJOH$FSBNJD
body fuse in a
compact package
t 1CGSFF3P)4
Compliant
t "WBJMBCMFJOSBUJOHTPG
0.10 to 10 Amperes
Ampere Range
Applications
0.100A - 10 A
This space saving fuse is ideally suited for lighting, power
supply, and adapter applications.
Electrical Characteristics
% of Ampere
Rating
Opening Time
100%
4 hours, Minimum
200%
5 seconds, Maximum
Electrical Characteristics
Ampere Rating
(A)
Voltage Rating
(V)
.100
.125
.200
.250
.300
.400
.500
.600
.750
.800
001.
01.5
01.6
002.
02.5
3.15
004.
04.5
005.
006.
06.3
06.5
007.
008.
010.
0.100
0.125
0.200
0.250
0.300
0.400
0.500
0.600
0.750
0.800
1.00
1.50
1.60
2.00
2.50
3.15
4.00
4.50
5.00
6.00
6.30
6.50
7.00
8.00
10.00
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
Interrupting
Rating
Nominal Cold
Resistance
(Ohms)
Nominal Melting
I2t (A2 sec)
50A @ 250 VAC
3.000
2.0600
0.9200
0.6920
0.5800
0.3655
0.2964
0.2667
0.2130
0.1600
0.0860
0.0563
0.0525
0.0400
0.0329
0.0216
0.0195
0.0146
0.0139
0.0111
0.01074
0.0100
0.0099
0.0087
0.0066
0.0054
0.0072
0.0165
0.030
0.039
0.120
0.236
0.245
0.256
0.390
0.406
0.974
0.973
1.812
2.675
5.904
10.03
14.42
14.58
23.08
22.90
35.24
36.90
43.97
70.10
Agency Approvals
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
874 Series
Amp Code
Notes:
Cold resistance measured at less than 10% of rated current at 23ºC.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/874.html for current information.
231
Revised: Feb 3, 2009
874 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
3.6 X 10 mm > Fast-Acting
> 874 Series
8A
10A
1A
1.5A
1.6A
2A
2.5A
3.15A
4A
4.5A
5A
6A
6.3A
6.5A
7A
.750A
.800A
.200A
.250A
.300A
.400A
.500A
.600A
.100A
Average Time Current Curves
.125A
Temperature Rerating Curve
1000
100
TIME IN SECONDS
10
1
0.1
0.01
0.001
0.1
1
10
100
100 0
CURRENT IN AMPS
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
200
Preheat:
180
(Depends on Flux Activation Temperature)
160
140
120
100
80
60
40
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Recommended Hand-Solder Parameters:
Time (Seconds)
Cooling Time
Preheat Time
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
874 Series
232
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/874.html for current information.
Axial Lead & Cartridge Fuses
3.6 X 10 mm > Fast-Acting > 874 Series
Product Characteristics
Materials
Body: Ceramic
Cap: Nickel Plated Brass
Tin Plated Copper
Operating Temperature
-55ºC to 125ºC
Terminal Strength
MIL-STD-202F Method 211A,
Test Condition A
Thermal Shock
MIL-STD-202F, Method 107G
Test Condition B3 (5 cycles -65ºC to
+125ºC)
Solderability
Reference IEC 60127 Second Edition
2003-01 Annex A
Vibration
MIL-STD-202F, Method 201A (10-55
Hz)
Product Marketing
Body: Brand Logo, Current Rating
Characteristic “F”, Agency approval marks
Humidty
MIL-STD-202, Method 106,
High Humidity (90-98%RH), Heat
(65ºC)
Packaging
Bulk (1000 pcs/pkg)
Tape & Reel (1000 pcs/reel)
Salt Spray
MIL-STD-202F, Method 101D, Test
Condition B
Dimensions
Part Numbering System
0874 xxxx M X E P
Series
Amp Code
Refer to Amp Code column of
Electrical Characteristics Table
Quantity Code
M = 1000
Packaging Code
X = Filler
Option Code
E = Axial Leaded
Lead-free
All dimensions in mm
Packaging
Packaging Option
874 Series
Bulk
Tape and Reel
Packaging Specification
Quantity
Quantity &
Packaging Code
Taping Width
Bulk
EIA 296
1000
1000
MXE
MRET1
N/A
T1 = 52mm (2.062”)
874 Series
P
= Lead-Free
Others = Special Options
Please call Littelfuse for detail
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/874.html for current information.
233
874 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
234
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Axial Lead & Cartridge Fuses
3.6 X 10 mm > Slo-Blo® > 875 Series
875 Series Fuse,
Lead-free 3.6 x 10 mm, Slo-Blo® Fuse
Description
Single Pigtail Axial Lead 3.6x10mm, Slo-Blo Fuse
Features
Agency
Agency File Number
Ampere Range
E10480
0.100A - 10 A
t %FTJHOFEUP6-$4"
248 Standard
t 4JOHMF1JHUBJM"YJBM
Lead format
t 4MP#MPDFSBNJDCPEZ
fuse in a compact
package
t 1CGSFF3P)4
Compliant
t "WBJMBCMFJOSBUJOHTPG
0.10 to 10 Amperes
Applications
This space saving fuse is ideally suited for lighting, power
supply, and adapter applications.
Electrical Characteristics
% of Ampere
Rating
Opening Time
100%
4 hours, Minimum
200%
60 seconds, Maximum
Electrical Characteristics
Ampere Rating
(A)
Voltage Rating
(V)
.100
.125
.200
.250
.300
.400
.500
.600
.800
001.
01.5
01.6
002.
02.5
003.
004.
005.
006.
007.
008.
010.
0.100
0.125
0.200
0.250
0.300
0.400
0.500
0.600
0.800
1.00
1.50
1.60
2.00
2.50
3.00
4.00
5.00
6.00
7.00
8.00
10.00
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
Interrupting
Rating
Nominal Cold
Resistance
(Ohms)
Nominal Melting
I2t (A2 sec)
50A @ 250 VAC
2.900
1.850
0.920
0.6575
0.435
0.321
0.256
0.151
0.116
0.095
0.0519
0.0476
0.02887
0.02246
0.0171
0.0135
0.00954
0.00891
0.008
0.0077
0.00675
0.0054
0.0072
0.0165
0.038
0.043
0.136
0.288
0.611
0.919
1.503
4.33
5.08
8.45
17.85
24.50
42.45
60.90
72.30
106.80
134.59
208.00
Agency Approvals
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
875 Series
Amp Code
Notes:
Cold resistance measured at less than 10% of rated current at 23ºC.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/875.html for current information.
235
Revised: Feb 3, 2009
875 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
®
3.6 X 10 mm > Slo-BloTransientology
> 875 Series
6A
7A
8A
10A
.800A
1A
1.5A
1.6A
2A
2.5A
3A
4A
5A
.500A
.600A
.200A
.250A
.300A
.400A
.125A
Average Time Current Curves
.100A
Temperature Rerating Curve
1000
100
TIME IN SECONDS
10
1
0.1
0.01
0.001
0 .1
1
10
100
100 0
CURRENT IN AMPS
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
200
Preheat:
180
(Depends on Flux Activation Temperature)
160
140
120
100
80
60
40
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Recommended Hand-Solder Parameters:
Time (Seconds)
Cooling Time
Preheat Time
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
875 Series
236
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/875.html for current information.
Axial Lead & Cartridge Fuses
3.6 X 10 mm > Slo-Blo® > 875 Series
Product Characteristics
Materials
Body: Ceramic
Cap: Nickel Plated Brass
Tin Plated Copper
Operating Temperature
-55ºC to 125ºC
Terminal Strength
MIL-STD-202F Method 211A,
Test Condition A
Thermal Shock
MIL-STD-202F, Method 107G
Test Condition B3 (5 cycles -65ºC to
+125ºC)
Solderability
Reference IEC 60127 Second Edition
2003-01 Annex A
Vibration
MIL-STD-202F, Method 201A (10-55
Hz)
Product Marketing
Body: Brand Logo, Current Rating
Characteristic “T”, Agency approval marks
Humidty
MIL-STD-202, Method 106,
High Humidity (90-98%RH), Heat
(65ºC)
Packaging
Bulk (1000 pcs/pkg)
Tape & Reel (1000 pcs/reel)
Salt Spray
MIL-STD-202F, Method 101D, Test
Condition B
Dimensions
Part Numbering System
0875 xxxx M X E P
Series
Amp Code
Refer to Amp Code column of
Electrical Characteristics Table
Quantity Code
M = 1000
Packaging Code
X = Filler
Option Code
E = Axial Leaded
Lead-free
All dimensions in mm
Packaging
Packaging Option
875 Series
Bulk
Tape and Reel
Packaging Specification
Quantity
Quantity &
Packaging Code
Taping Width
Bulk
EIA 296
1000
1000
MXE
MRET1
N/A
T1 = 52mm (2.062”)
875 Series
P
= Lead-Free
Others = Special Options
Please call Littelfuse for detail
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/875.html for current information.
237
875 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
238
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Axial Lead & Cartridge Fuses
3.6 X 10 mm > Fast-Acting > 876 Series
876 Series Fuse,
Lead-free 3.6 x 10 mm, Fast–Acting Fuse
Description
Single Pigtail Axial Lead 3.6 x 10mm Fast-Acting Fuse
Features
t %FTJHOFEUPNFFU
IEC 60127-3 Standard
Sheet 3
t 'BTU"DUJOHDFSBNJD
body fuse in a
compact package
Agency
Agency File Number
Ampere Range
40022494
0.125 – 0.630A
1.6 – 5A
E10480
0.125 – 5A
t 4JOHMF1JHUBJM"YJBM
Lead format
t 1CGSFF3P)4
compliant
t "WBJMBCMFJOSBUJOHTPG
.125 to 5 Amperes
Applications
t 5IJTTQBDFTBWJOHGVTFJTJEFBMMZTVJUFEGPSMJHIUJOH
power supply, and adapter applications.
Electrical Characteristics
% of Ampere
Rating
Opening Time
150%
60 minutes, Minimum
210%
30 minutes, Maximum
275%
10 ms., Min.; 3 sec. Max.
400%
3 ms., Min.; 300 ms. Max.
1000%
20 ms. Max.
Amp Code
Ampere
Rating
(A)
Voltage
Rating
(V)
Interrupting
Rating
Nominal Agency Approvals
Nominal
Nominal
Nominal
Power
Cold
Melting
Voltage
Dissipation
Resistance 2
I t (A2 sec) Drop (mV)
(mW)
(Ohms)
.125
0.125
250
35A @ 250 V AC
1.066
0.020
168
60
x
x
.160
0.160
250
35A @ 250 V AC
1.000
0.028
183
92
x
x
.250
0.250
250
35A @ 250 V AC
0.573
0.110
87
62
x
x
.630
0.630
250
35A @ 250 V AC
0.131
0.170
102
221
x
x
01.6
1.6
250
35A @ 250 V AC
0.0388
1.8
70
382
x
x
002.
2.0
250
35A @ 250 V AC
0.0329
2.51
70
470
x
x
004.
4.0
250
40A @ 250 V AC
0.0149
14.64
70
985
x
x
005.
5.0
250
50A @ 250 V AC
0.0111
26.85
66
1200
x
x
876 Series
Electrical Characteristics
Notes:
Cold resistance measured at less than 10% of rated current at 23ºC.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/876.html for current information.
239
Revised: Feb 3, 2009
876 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
3.6 X 10 mm > Fast-Acting
> 876 Series
5A
4A
1.6A
2A
.630A
1000
.250A
Average Time Current Curves
.125A
.160A
Temperature Rerating Curve
100
TIME IN SECONDS
10
1
0.1
0.01
0.001
0.1
1
10
100
100 0
CURRENT IN AMPS
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
200
Preheat:
180
(Depends on Flux Activation Temperature)
160
140
120
100
80
60
40
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Recommended Hand-Solder Parameters:
Time (Seconds)
Cooling Time
Preheat Time
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
876 Series
240
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/876.html for current information.
Axial Lead & Cartridge Fuses
3.6 X 10 mm > Fast-Acting > 876 Series
Product Characteristics
Materials
Body: Ceramic
Cap: Nickel Plated Brass
Tin Plated Copper
Operating Temperature
-55ºC to 125ºC
Terminal Strength
MIL-STD-202F Method 211A,
Test Condition A
Thermal Shock
MIL-STD-202F, Method 107G
Test Condition B3 (5 cycles -65ºC to
+125ºC)
Solderability
Reference IEC 60127 Second Edition
2003-01 Annex A
Vibration
MIL-STD-202F, Method 201A (10-55
Hz)
Product Marketing
Body: Brand Logo, Current Rating
Characteristic “F”, Agency approval marks
Humidty
MIL-STD-202, Method 106,
High Humidity (90-98%RH), Heat
(65ºC)
Packaging
Bulk (1000 pcs/pkg)
Tape & Reel (1000 pcs/reel)
Salt Spray
MIL-STD-202F, Method 101D, Test
Condition B
Dimensions
Part Numbering System
0876 xxxx M X E P
Series
Amp Code
Refer to Amp Code column of
Electrical Characteristics Table
Quantity Code
M = 1000
Packaging Code
X = Filler
Option Code
E = Axial Leaded
Lead-free
All dimensions in mm
Packaging
Packaging Option
876 Series
Bulk
Tape and Reel
Packaging Specification
Quantity
Quantity &
Packaging Code
Taping Width
Bulk
EIA 296
1000
1000
MXE
MRET1
N/A
T1 = 52mm ( 2.062”)
876 Series
P
= Lead-Free
Others = Special Options
Please call Littelfuse for detail
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/876.html for current information.
241
876 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
242
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Axial Lead & Cartridge Fuses
3.6 X 10 mm > Slo-Blo® > 877 Series
877 Series Fuse,
Lead-free 3.6 x 10 mm, Slo-Blo® Fuse
Description
Single Pigtail Axial Lead 3.6x10mm, Slo-Blo Fuse
Features
t 4JOHMF1JHUBJM"YJBM
Lead format
t %FTJHOFEUPNFFU
IEC 60127-3 Standard
Sheet 4
t 4MP#MPDFSBNJDCPEZ
fuse in a compact
package
Agency
Agency File Number
Ampere Range
40023242
2A – 6.3A
E10480
2A – 6.3A
t 1CGSFF3P)4
compliant
t "WBJMBCMFJOSBUJOHTPG
2 to 6.3 Amperes
Applications
This space saving fuse is ideally suited for lighting, power
supply, and adapter applications.
Electrical Characteristics
% of Ampere
Rating
Opening Time
150%
60 minutes, Minimum
210%
2 minutes, Maximum
275%
400 ms., Min.; 10 sec. Max.
400%
150 ms., Min.; 3 sec. Max.
1000%
20 ms. Min.; 150 ms. Max.
Nominal Agency Approvals
Nominal
Nominal
Nominal
Power
Cold
Melting
Voltage
Dissipation
Resistance 2
I t (A2 sec) Drop (mV)
(mW)
(Ohms)
Ampere
Rating
(A)
Voltage
Rating
(V)
Interrupting
Rating
002.
2.0
250
35A @ 250 V AC
0.035
24.6
82
450
x
x
3.15
3.15
250
35A @ 250 V AC
0.020
67.6
76
690
x
x
004.
4.0
250
40A @ 250 V AC
0.0167
143.4
74
926
x
x
06.3
6.3
250
63A @ 250 V AC
0.0087
190
60
1130
x
x
Amp Code
877 Series
Electrical Characteristics
Notes:
1. Cold resistance measured at less than 10% of rated current at 23ºC.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/877.html for current information.
243
Revised: Feb 3, 2009
877 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
®
3.6 X 10 mm > Slo-BloTransientology
> 877 Series
Average Time Current Curves
2A
3.15A
4A
6.3A
Temperature Rerating Curve
1000
100
TIME IN SECONDS
10
1
0.1
0.01
0.001
0.1
1
10
100
1000
CURRENT IN AMPS
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
200
Preheat:
180
(Depends on Flux Activation Temperature)
160
140
120
100
80
60
40
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Recommended Hand-Solder Parameters:
Time (Seconds)
Cooling Time
Preheat Time
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
877 Series
244
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/877.html for current information.
Axial Lead & Cartridge Fuses
3.6 X 10 mm > Slo-Blo® > 877 Series
Product Characteristics
Materials
Body: Ceramic
Cap: Nickel Plated Brass
Tin Plated Copper
Operating Temperature
-55ºC to 125ºC
Terminal Strength
MIL-STD-202F Method 211A,
Test Condition A
Thermal Shock
MIL-STD-202F, Method 107G
Test Condition B3 (5 cycles -65ºC to
+125ºC)
Solderability
Reference IEC 60127 Second Edition
2003-01 Annex A
Vibration
MIL-STD-202F, Method 201A (10-55
Hz)
Product Marketing
Body: Brand Logo, Current Rating
Characteristic “T”, Agency approval marks
Humidty
MIL-STD-202, Method 106,
High Humidity (90-98%RH), Heat
(65ºC)
Packaging
Bulk (1000 pcs/pkg)
Tape & Reel (1000 pcs/reel)
Salt Spray
MIL-STD-202F, Method 101D, Test
Condition B
Dimensions
Part Numbering System
0877 xxxx M X E P
Series
Amp Code
Refer to Amp Code column of
Electrical Characteristics Table
Quantity Code
M = 1000
Packaging Code
X = Filler
Option Code
E = Axial Leaded
Lead-free
All dimensions in mm
Packaging
Packaging Option
877 Series
Bulk
Tape and Reel
Packaging Specification
Quantity
Quantity &
Packaging Code
Taping Width
Bulk
EIA 296
1000
1000
MXE
MRET1
N/A
T1 = 52mm (2.062”)
877 Series
P
= Lead-Free
Others = Special Options
Please call Littelfuse for detail
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/877.html for current information.
245
877 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
246
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Axial Lead & Cartridge Fuses
"('BTU"DUJOH4FSJFT
208 Series
PS
E
Lead-Free 2AG, Fast-Acting Fuse
Description
Littelfuse 208 Series (2AG) 350V Fast-Acting Fuses are
available in cartridge form or with axial leads. This series
provides the same performance characteristics as its 3AG
counterpart, while occupying one-third the space. Sleeved
fuses are available.
Features
Agency Approvals
Agency
PS
E
Agency File Number
Ampere Range
E10480
125mA - 10A
NBK200405-E10480 C/D
1A - 5A
6A - 10A
NBK060405-E10480 E/F
t *OBDDPSEBODF
with Underwriter’s
Laboratories Standard
UL 248-14
t "WBJMBCMFJODBSUSJEHF
and axial lead form
and with various lead
forming dimensions
t 'VTFTBSF
boardwashable in most
solvents
t 3P)4DPNQMJBOUBOE
Lead-free
Applications
t &MFDUSJDBMCBMMBTUTVTFEJOnVPSFTDFOUMJHIUJOHBOEPUIFS
applications
Electrical Characteristics for Series
125mA - 10A
% of Ampere
Rating
Opening Time
100%
4 Hours, Min.
135%
1 Hour, Max.
200%
1 Second, Max.
Amp Code
Amp Rating
Voltage
Rating
Interrupting
Rating
Nominal Cold
Resistance
(Ohms)
Nominal
Melting
I2t (A2 sec)
Agency Approvals
PS
E
.125
0.125
350
3.900
0.00286
x
x
.250
0.250
350
1.150
0.0300
x
x
.375
0.375
350
0.395
0.171
x
x
.500
0.500
350
0.265
0.365
x
x
.750
0.750
350
0.152
1.050
x
001.
1.0
350
0.103
2.220
x
x
x
x
01.5
1.5
350
0.0712
0.800
x
x
x
002.
2.0
350
0.0497
1.50
x
x
x
0.0372
2.68
x
x
x
0.0317
4.62
x
x
x
100A @
350V AC
208 Series
Electrical Characteristic Specifications by Item
02.5
2.5
350
003.
3.0
350
03.5
3.5
350
0.0265
6.70
x
x
x
004.
4
350
0.0240
9.40
x
x
x
005.
5
350
0.0186
17.00
x
x
x
006.
6
350
0.0154
22.10
x
x
x
x
007.
7
350
0.0130
40
x
x
008.
8
350
0.0107
56
x
x
x
010.
10
350
0.0075
116
x
x
x
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/208.html for current information.
247
Revised: Apr 15, 2009
208 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
"('BTU"DUJOH4FSJFT
100
1/4A
3/8A
1/2A
3/4A
1A
1 1/2A
2A
2 1/2A
3A
4A
5A
6A
7A
8A
10A
Average Time Current Curves
1/10A
1/8A
Temperature Rerating Curve
TIME IN SECONDS
10
1
0.1
0.01
0.001
0.1
1
10
100
CURRENT IN AMPERES
1000
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
Preheat:
200
(Depends on Flux Activation Temperature)
180
160
140
120
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
100
80
60
40
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Recommended Hand-Solder Parameters:
Time (Seconds)
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Cooling Time
Preheat Time
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
208 Series
248
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/208.html for current information.
Axial Lead & Cartridge Fuses
"('BTU"DUJOH4FSJFT
Product Characteristics
Materials
Terminal Strength
Solderability
Product Marking
Body : Glass
Cap : Nickel–plated brass
Leads: Tin–plated Copper
MIL-STD-202G, Method 211A,
Test Condition A
Reference IEC 60127 Second Edition
2003-01 Annex A
Cap1 : Brand logo, current and voltage
ratings
Cap2 : Series and agency approval marks
Dimensions
Operating
Temperature:
–55ºC to 125ºC.
Thermal
Shock:
MIL-STD-202G, Method 107G, Test Condition B
(5 Cycles -65ºC to +125ºC).
Vibration
MIL-STD-202G, Method 201A
Humidity
MIL-STD-202G, Method 103B, Test Condition
A: High RH (95%) and elevated temp (40ºC)
for 240 hours
Salt Spray
MIL-STD-202G, Method 101D, Test Condition B
Part Numbering System
208 000P Series
0208 xxxx M X E P
208 000EP Series
4.7 (.184")
.635
(.025")
4.5
(.177")
Series
Current Rating Code
14.48
(.57")
14.48
(.57")
Refer to Amp Code column of
Electrical Characteristics Table
38.1
(1.50") TYP.
Quantity Code
M = 1000
Packaging Code
X = Loose Pack
Option Codes
Blank = Cartridge Type Fuse
E = Axial Leaded Fuse
Lead-free
Packaging Option
Packaging Specification
Quantity
Quantity & Packaging
Code
Taping Width
N/A
1000
MX
N/A
208 Series
Bulk
Bulk
N/A
1000
MXE
N/A
Reel and Tape
EIA 296-E
1500
DRT1
T1=52mm (2.062”)
208 Series
Packaging
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/208.html for current information.
249
208 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
250
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Axial Lead & Cartridge Fuses
"(5JNF-BH4FSJFT
209 Series
PS
E
Lead-Free 2AG, Slo-Blo® (Time-Lag) Fuse
Description
Littelfuse 209 Series (2AG) 350V, Time-Lag (Slo-Blo®) Fuses
are available in cartridge form or with axial leads. This
series provides the same performance characteristics as
its 3AG counterpart, while occupying one-third the space.
Sleeved fuses are available.
Features
Agency Approvals
PS
E
Agency File Number
Ampere Range
E10480
250mA - 1A
NBK210405-E10480 G/H
1A
t "WBJMBCMFJODBSUSJEHF
and axial lead form and
with various forming
dimensions
t 'VTFTBSF
boardwashable in most
solvents
t 3P)4DPNQMJBOUBOE
Lead-free
Applications
t&MFDUSPOJD-JHIUJOH#BMMBTUT
250mA - 1A
Electrical Characteristics for Series
% of Ampere
Rating
Opening Time
100%
4 Hours, Min.
135%
1 Hour, Max.
200%
3 Sec. Min. ; 20 Sec. Max.
Electrical Characteristic Specifications by Item
Amp
Code
Ampere
Rating
(A)
Voltage
Rating
(V)
Interrupting
Rating
Nominal Cold
Resistance
(Ohms)
Agency Approvals
Nominal
Melting
I2t (A2 sec)
PS
E
.250
0.25
350
2.410
0.216
x
x
.375
0.375
350
1.170
0.580
x
x
.500
0.5
350
0.688
1.160
x
x
.600
0.6
350
0.477
1.750
x
x
.750
0.75
350
0.340
2.950
x
x
.800
0.8
350
0.304
3.450
x
001.
1
350
0.210
5.640
x
100A @
350Vac
209 Series
Agency
t *OBDDPSEBODF
with Underwriter’s
Laboratories Standard
UL 248-14
x
x
x
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/209.html for current information.
251
Revised: Jan 12, 2009
209 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
"(5JNF-BH4FSJFT
Average Time Current Curves
.250A
.375A
.500A
.750A
1.00A
Temperature Rerating Curve
1000
TIME IN SECONDS
100
10
1
0.1
0.01
0.1
1
10
100
CURRENT IN AMPERES
1000
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
Preheat:
200
(Depends on Flux Activation Temperature)
180
160
140
120
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
100
80
60
40
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
Recommended Hand-Solder Parameters:
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Time (Seconds)
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Cooling Time
Preheat Time
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
209 Series
252
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/209.html for current information.
Axial Lead & Cartridge Fuses
"(5JNF-BH4FSJFT
Product Characteristics
Materials
Terminal Strength
Solderability
Product Marking
Body : Glass
Cap : Nickel–plated brass
Leads: Tin–plated Copper
MIL-STD-202G, Method 211A,
Test Condition A
Reference IEC 60127 Second Edition
2003-01 Annex A
Cap1 : Brand logo, current and voltage
ratings
Cap2 : Series and agency approval marks
Dimensions
Operating
Temperature:
–55ºC to 125ºC.
Thermal
Shock:
MIL-STD-202G, Method 107G, Test Condition B
(5 Cycles -65ºC to +125ºC).
Vibration
MIL-STD-202G, Method 201A
Humidity
MIL-STD-202G, Method 103B, Test Condition
A: High RH (95%) and elevated temp (40ºC)
for 240 hours
Salt Spray
MIL-STD-202G, Method 101D, Test Condition B
Part Numbering System
209 000P Series
0209 xxxx M X E P
209 000EP Series
4.7 (.184")
Series
.635
(.025")
4.5
(.177")
Current Rating Code
Refer to Amp Code column of
Electrical Characteristics Table
14.48
(.57")
14.48
(.57")
Quantity Code
38.1
(1.50") TYP.
M = 1000
Packaging Code
X = Loose Pack
Option Codes
Blank = Cartridge Type Fuse
E = Axial Leaded Fuse
Lead-free
Packaging Option
Quantity & Packaging
Code
Taping Width
1000
MX
N/A
1000
MXE
N/A
1500
DRT1
T1=52mm (2.062”)
Packaging Specification
Quantity
Bulk
N/A
Bulk
N/A
Reel and Tape
EIA 296-E
209 Series
209 Series
Packaging
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/209.html for current information.
253
209 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
254
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Axial Lead & Cartridge Fuses
"('BTU"DUJOH4FSJFT
224/225 Series
PS
E
Lead-Free 2AG, Fast-Acting
Description
The 2AG Fast-Acting Fuses are available in cartridge
form or with axial leads. 2AG Fuses provide the same
performance characteristics as their 3AG counterpart, while
occupying one-third the space. Sleeved fuses are available.
Features
Agency Approvals
Agency File Number
PS
E
Ampere Range
E10480
100mA - 3.5A
E10480
4A - 10A
LR 29862
100mA - 10A
NBK200405-E10480
NBK060405-E10480
Cartridge: 1A - 10A
Pigtail: 1A - 10A
t "WBJMBCMFJODBSUSJEHF
and axial lead form and
with various forming
dimensions
t 'VTFTBSF
boardwashable in most
solvents
t 3P)4DPNQMJBOUBOE
Lead-free
Applications
Used as supplementary protection in appliance or
utilization equipment to provide individual protection for
components or internal circuits.
Electrical Characteristics for Series
100mA - 10A
% of Ampere
Rating
Opening Time
100%
4 hours, Minimum
135%
1 hour, Maximum
200%
1 sec., Maximum
Electrical Characteristic Specifications by Item
Amp
Code
Ampere
Rating
(A)
Voltage
Rating
(V)
.100
.125
.250
.375
.500
.750
001.
01.5
002.
02.5
003.
03.5
004.
005.
005.
006.
007.
008.
010.
.1
0.125
0.25
0.375
0.5
0.75
1
1.5
2
2.5
3
3.5
4
5
5
6
7
8
10
250
250
250
250
250
250
250
250
250
250
250
250
125
125
250
125
125
125
125
Interrupting
Rating
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
Nominal
Cold
Resistance
(Ohms)
6.1500
3.9000
1.1500
0.3950
0.2650
0.1520
0.1027
0.0712
0.0497
0.0372
0.0317
0.0265
0.0240
0.0186
0.0186
0.0154
0.0130
0.0107
0.0075
Agency Approvals
Nominal
Melting
I2t (A2 sec)
0.00075
0.00286
0.0300
0.171
0.365
1.050
2.220
0.800
1.500
2.680
4.620
6.700
9.400
17.0
17.0
22.1
40.0
56.0
116.0
®
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
PS
E
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
224/225 Series
Agency
t *OBDDPSEBODF
with underwriter’s
Laboratories Standard
UL 248-14
* 10A with 500A @ 125 Vdc internal breaking capacity testing.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/224.html
or /225.html for current information.
255
Revised: Jan 12, 2009
224/225 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
"('BTU"DUJOH4FSJFT
.250A
.375A
.500A
.750A
1.00A
1.50A
2.00A
2.50A
3A
4A
5A
6A
7A
8A
10A
Average Time Current Curves
.100A
.125A
Temperature Rerating Curve
100
TIME IN SECONDS
10
1
0.1
0.01
0.001
0.1
1
10
100
CURRENT IN AMPERES
1000
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
200
Preheat:
180
(Depends on Flux Activation Temperature)
160
140
120
100
80
60
40
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Recommended Hand-Solder Parameters:
Time (Seconds)
Cooling Time
Preheat Time
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
224/225 Series
256
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/224.html
or /225.html for current information.
Axial Lead & Cartridge Fuses
"('BTU"DUJOH4FSJFT
Product Characteristics
Materials
Terminal Strength
Solderability
Product Marking
Body : Glass
Cap : Nickel–plated brass
Leads: Tin–plated Copper
MIL-STD-202F Method 211A,
Test Condition A
Reference IEC 6012/Second Edition
2003-01 Annex A
Cap1 : Brand logo, current and Voltage
Ratings
Cap2 : Series and Agency approval Mark
Dimensions
Operating
Temperature:
–55ºC to +125ºC
Thermal
Shock:
MIL-STD-202F, Method 107G, Test Condition B
(5 Cycles -65ºC to +125ºC).
Vibration
MIL-STD-202F, Method 201A
Humidity
MIL-STD-202F Method 103B, Test Condition A:
High RH (95%) and elevated temp (40ºC) for
240 hours
Salt Spray
MIL-STD-202F Method 101D, Test Condition B
Part Numbering System
225 000P Series
224 000P Series
4.7 (.184")
.635
(.025")
4.5
(.177")
14.48
(.57")
0224 xxxx M X P
14.48
(.57")
Series
Amp Code
Refer to Amp Code column of
Electrical Characteristics Table
38.1
(1.50") TYP.
Quantity Code
M = 1000
Packaging Code
X = Filler
224/225 Series
Lead-free
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/224.html
or /225.html for current information.
257
224/225 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
"('BTU"DUJOH4FSJFT
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
Taping Width
N/A
5
VX
N/A
224 Series
Bulk
Bulk
N/A
5
VXU
N/A
Bulk
N/A
100
HX
N/A
Bulk
N/A
100
HXU
N/A
Bulk
N/A
1000
MX
N/A
Bulk
N/A
1000
MX250U
N/A
Bulk
N/A
1000
MXF16
N/A
Bulk
N/A
1000
MXF23
N/A
Bulk
N/A
1000
MXU
N/A
Reel and Tape
EIA 296-E
1500
DRT1
T1=52mm (2.062”)
Reel and Tape
EIA 296-E
1500
DRT1U
T1=52mm (2.062”)
Reel and Tape
EIA 296-E
1500
DRT2
T2=63mm (2.500”)
Reel and Tape
EIA 296-E
1500
DRT3
T3=73mm (2.874”)
Reel and Tape
EIA 296-E
2500
ERT1
T1=52mm (2.062”)
Reel and Tape
EIA 296-E
2500
ERT2
T2=63mm (2.500”)
Reel and Tape
EIA 296-E
2500
ERT3
T3=73mm (2.874”)
Bulk
N/A
1000
MX50LE
N/A
Bulk
N/A
5
VX
N/A
225 Series
Bulk
N/A
5
VXU
N/A
Bulk
N/A
100
HX
N/A
Bulk
N/A
100
HXU
N/A
Bulk
N/A
1000
MX
N/A
Bulk
N/A
1000
MXU
N/A
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
224/225 Series
258
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/224.html
or /225.html for current information.
Axial Lead & Cartridge Fuses
"(5JNF-BH4FSJFT
229/230 Series Lead-Free 2AG, Slo-Blo® Fuse and Indicating Slo-Blo® Fuse
PS
E
Description
The 2AG Slo-Blo® Fuses are available in cartridge form or
with axial leads. 2AG Fuses provide the same performance
characteristics as their 3AG counterpart, while occupying
one-third the space.
The fuse catalog number with the suffix “S” instantly
identifies itself upon opening by showing a discoloration
of its glass body. Guesswork and time consuming circuit
testing are eliminated. This unique design offers the same
quality performance characteristics as the standard 2AG
Slo-Blo® fuse design. When ordering the 2AG Indicating
Slo-Blo® Fuse, an 'S' is required after the catalog number.
Agency Approvals
Features
Agency File Number
Ampere Range
E10480
250mA - 3.5A
LR 29862
250mA - 7A
E10480
4A - 7A
t 'VTFTBSF
boradwashable in most
solvents
NBK210405 E10480D/F/G/H
1A - 7A
t 3P)4DPNQMJBOUBOE
Lead-free
PS
E
t *OBDDPSEBODFXJUI6-
Standard 248-14
250mA - 7A
Opening Time
100%
4 hours, Minimum
135%
200%
t 4MFFWFEGVTFTBSF
available
Applications
t Standard 229/230 series meets the demanding
requirements of the Telecom Industry.
Electrical Characteristics for Series
% of Ampere
Rating
t "WBJMBCMFJODBSUSJEHF
and axial lead form
and with various lead
forming dimensions
t These fuses combine conventional overcurrent
protection with ability to withstand high current,
short duration pulses which complies to short circuit
requirements of UL 1459 for Telecom equipments.
1 hour, Maximum
3 sec.onds, Maximum
20 seconds, Maximum
229/230 Series
Agency
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/229.html
or /230.html for current information.
259
Revised: Feb 25, 2009
229/230 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
"(5JNF-BH4FSJFT
Electrical Characteristic Specification by Item
Amp
Code
Ampere Voltage
Rating
Rating
(A)
(V)
Interrupting
Rating
Nominal
Melting
I2t (A2 sec)
2.4300
1.3100
1.1685
0.6935
0.4805
0.3430
0.3060
0.2120
0.1460
0.1077
0.0698
0.0567
0.0502
0.0383
0.216
0.490
0.580
1.16
1.75
2.95
3.45
5.64
9.80
15.0
30.0
39.0
50.0
77.0
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
.250
.350
.375
.500
.600
.750
.800
001.
1.25
01.5
002.
2.25
02.5
003.
0.25
0.35
0.375
0.5
0.6
0.75
0.8
1
1.25
1.5
2
2.25
2.5
3
250
250
250
250
250
250
250
250
250
250
250
250
250
250
03.5
3.5
250
[email protected]
[email protected]
[email protected]
0.0312
110.0
004.
005.
006.
007.
4
5
6
7
125
125
125
125
[email protected]
[email protected]
0.0258
0.0186
0.0141
0.0116
148.0
267
380
464
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
Agency Approvals
Nominal Cold
Resistance
(Ohms)
PS
E
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
229/230 Series
260
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/229.html
or /230.html for current information.
Axial Lead & Cartridge Fuses
"(5JNF-BH4FSJFT
Description
Standard 229 and 230 Series Slo-Blo fuses meet the demanding requirements of the Telecom industry. These fuses combine
conventional overcurrent protection with the ability to withstand high current, short duration pulses. These fuses comply
with the short circuit requirements of UL 1459 for telephone equipment. Insulating sleeve option available.
Features
In accordance with underwriter’s Laboratories Standard UL 248-14.
Fuses are boardwashable in most solvents.
Available in cartridge and axial lead from and with various lead forming dimensions.
RoHS compliant and lead-free.
Available in ratings from 250mA to 1.25A.
Applications
Used for the telecom industry.
Surge Withstand Specificatons
Amp Code
Ampere Rating
(A)
.250
.350
.375
.500
.600
.750
.800
001.
1.25
0.25
0.35
0.375
0.5
0.6
0.75
0.8
1
1.25*
Interrupting
Rating
Nominal Cold
Resistance
(Ohms)
Nominal
Melting
I2t (A2 sec)
10 x 160 μs
1500V
10 x 560 μs
800V
10 x 1000 μs
1000V
[email protected]
[email protected]
[email protected]
[email protected]
2.4300
1.3100
1.1685
0.6935
0.4805
0.3430
0.3060
0.2120
0.1460
0.216
0.490
0.580
1.16
1.75
2.95
3.45
5.64
9.80
23.0A
34.0A
40.0A
60.0A
71.0A
91.0A
104.0A
130A
162.0A
16.6A
25.8A
25.4A
37.7A
47.2A
65.5A
68.9A
88.6A
118.1A
12.4A
19.3A
19.0A
28.2A
35.3A
49.0A
51.6A
66.3A
100.0A
* 500A peak, 2500V, 2 x 10 microseconds, 20 repetitions
229/230 Series
Peak Withstand Current(lp): These fuses will withstand 50 repetitions of a double exponential impulse wave having peak
currents(lp) and peak voltages as listed.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/229.html
or /230.html for current information.
261
229/230 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
"(5JNF-BH4FSJFT
Average Time Current Curves
.250A
.375A
.500A
.750A
1.00A
1.50A
2.0A
2 .5A
3.0A
3.5A
4A
5A
7A
Temperature Rerating Curve
1000
TIME IN SECONDS
100
10
1
0.1
0.01
0.1
1
10
100
CURRENT IN AMPERES
1000
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
200
Preheat:
180
(Depends on Flux Activation Temperature)
160
140
120
100
80
60
40
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Recommended Hand-Solder Parameters:
Time (Seconds)
Cooling Time
Preheat Time
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
229/230 Series
262
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/229.html
or /230.html for current information.
Axial Lead & Cartridge Fuses
"(5JNF-BH4FSJFT
Product Characteristics
Body: Glass
Cap: Nickel–plated brass
Leads: Tin–plated Copper
Materials
Terminal Strength
MIL-STD-202G, Method 211A, Test
Condition A
Solderability
Reference IEC 60127 Second Edition
2003-01 Annex A
Cap1:
Product Marking
Cap2:
Brand logo, current and voltage
ratings
Series and agency approval
marks
Dimensions
Operating Temperature
–55ºC to +125ºC
Thermal Shock
MIL-STD-202G, Method 107G,
Test Condition B: (5 cycles -65ºC to 125ºC)
Vibration
MIL-STD-202G, Method 201A
Humidity
MIL-STD-202G, Method
103B, Test Condition A: High
RH (95%) and Elevated
temperature(40ºC) for 240
hours
Salt Spray
MIL-STD-202G, Method 101D,
Test Condition B
Part Numbering System
229 000P Series
230 000P Series
4.7 (.184")
.635
(.025")
4.5
(.177")
14.48
(.57")
0229 xxxx M X P
14.48
(.57")
Series
Amp Code
Refer to Amp Code column of
Electrical Characteristics Table
38.1
(1.50") TYP.
Quantity Code
M = 1000
Axial Lead Material: Solder coated Copper.
Packaging Code
X = Filler
229/230 Series
Lead-free
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/229.html
or /230.html for current information.
263
229/230 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
"(5JNF-BH4FSJFT
Packaging
Packaging Specification
Quantity
Quantity &
Packaging Code
Taping Width
Bulk
N/A
5
VX
N/A
Bulk
N/A
5
VXS
N/A
Bulk
N/A
100
HX
N/A
Bulk
N/A
100
HXS
N/A
Bulk
N/A
1000
MX
N/A
Bulk
N/A
1000
MXS
N/A
Bulk
N/A
5
VX
N/A
Bulk
N/A
5
VXS
N/A
Bulk
N/A
100
HX
N/A
Bulk
N/A
100
HXS
N/A
Bulk
N/A
1000
MX
N/A
Bulk
N/A
1000
MXE
N/A
Packaging Option
229 Series
230 Series
Bulk
N/A
1000
MXF1
N/A
Bulk
N/A
1000
MXF16
N/A
Bulk
N/A
1000
MXF16O
N/A
Bulk
N/A
1000
MXF17
N/A
Bulk
N/A
1000
MXF17O
N/A
Bulk
N/A
1000
MXF23
N/A
Bulk
N/A
1000
MXF23O
N/A
Bulk
N/A
1000
MXF32
N/A
Bulk
N/A
1000
MXO
N/A
Bulk
N/A
1000
MXS
N/A
Reel and Tape
EIA 296-E
1500
DRT2
T2=63mm (2.500”)
Reel and Tape
EIA 296-E
1500
DRT2S
T2=63mm (2.500”)
Reel and Tape
EIA 296-E
1500
DRT4
N/A
Reel and Tape
EIA 296-E
2500
ERT2
T2=63mm (2.500”)
Reel and Tape
EIA 296-E
2500
ERT2S
T2=63mm (2.500”)
Reel and Tape
EIA 296-E
1000
MRT1E
T1=52mm (2.062”)
Reel and Tape
EIA 296-E
1500
DAT1
T1=52mm (2.062”)
Reel and Tape
EIA 296-E
1500
DAT1O
T1=52mm (2.062”)
Reel and Tape
EIA 296-E
1500
DRT1
T1=52mm (2.062”)
Reel and Tape
EIA 296-E
1500
DRT1S
T1=52mm (2.062”)
Reel and Tape
EIA 296-E
1500
DRT1SS
T1=52mm (2.062”)
Reel and Tape
EIA 296-E
1500
DRT3
T3=73mm (2.874”)
Reel and Tape
EIA 296-E
1500
DRT3S
T3=73mm (2.874”)
Reel and Tape
EIA 296-E
2500
ERT1
T1=52mm (2.062”)
Reel and Tape
EIA 296-E
2500
ERT1S
T1=52mm (2.062”)
Reel and Tape
EIA 296-E
2500
ERT3
T3=73mm (2.874”)
Reel and Tape
EIA 296-E
2500
ERT3S
T3=73mm (2.874”)
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
229/230 Series
264
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/229.html
or /230.html for current information.
Axial Lead & Cartridge Fuses
5×20 mm > Fast-Acting > 217 Series
217 Series,
PS
E
5 x 20 mm, Fast-acting Fuse
Description
5x20mm fast-acting glass body cartridge fuse designed to
IEC specification.
Features
Agency Approvals
PS
E
Agency File Number
Cartridge Certificates:
NBK120802-E10480 A&C
Leaded Certificates:
NBK120802-E10480 B&D
Certificates:
2002010207007600
2002010207007599
Certificates:
SU05001-3004
SU05001-2005
SU05001-2006
SU05001-2007
t "WBJMBCMFJODBSUSJEHF
and axial lead form
t .FFUTUIF*&$
60127-2, Sheet 2
t 3P)4DPNQMJBOUBOE
lead-free
Applications
Ampere Range
1A – 5A
6.3A – 15A
1A – 5A
6.3A – 15A
Used as supplementary protection in appliance or
utilization equipment to provide individual protection for
components or internal circuits.
32mA – 800mA
1A – 6.3A
Electrical Characteristics for Series
32mA – 40mA
50mA – 315mA
400mA – 6.3A
8A & 10A
% of Ampere
Rating
150%
E10480
JDYX2
File:
029862
Acc. Class:
LR1422-30
32mA – 6.3A
License:
KM41462
400mA – 6.3A
File:
9848103, 9931059
304518 & 304555
32mA – 6.3A
License:
40014645
32mA – 6.3A,
8A*, 10A*
License:
40016647
210%
275%
400%
15A*
1000%
32mA – 15A
Ampere Rating
Opening Time
32mA–100mA
60 minutes, Minimum
125mA-6.3A
60 minutes, Minimum
8A-15A
30 minutes, Minimum
32mA-100mA
30 minutes, Maximum
125mA-6.3A
30 minutes, Maximum
8A-15A
30 minutes, Maximum
32mA-100mA
0.01 sec., Min.; .5 sec. Max.
125mA-6.3A
0.05 sec., Min.; 2 sec. Max.
8A-15A
0.05 sec., Min.; 2 sec. Max.
32mA-100mA
.003 sec., Min.; 0.1 sec.. Max.
125mA-6.3A
.01 sec., Min.; 0.3 sec. Max.
8A-15A
.01 sec., Min.; 0.4 sec. Max.
32mA-100mA
.02 second, Maximum
125mA-6.3A
.02 second, Maximum
8A-15A
.04 second, Maximum
217 Series
Agency
specification for fastacting fuses
t %FTJHOFEUP
International (IEC )
Standards for use
globally
*Approval for cartridge versions only
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/217.html for current information.
265
Revised: Feb 19, 2009
217 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
5×20 mm > Fast-Acting
> 217 Series
Electrical Characteristic Specifications by Item
Nominal
Cold
Resistance
(Ohms)
Nominal
Melting
I2t (A2 sec)
Nominal
Voltage
Drop at
Rated
Current
(mV)
Nominal
Power
Dissipation
At Rated
Current
(W)
250
262.2000
0.00006
10000
1.6
x
x
x
x
x
x
x
250
183.1500
0.00008
8000
1.6
x
x
x
x
x
x
x
0.05
250
15.2000
0.00019
7000
1.6
x
x
x
x
x
x
x
.063
0.063
250
10.4500
0.00056
5000
1.6
x
x
x
x
x
x
x
.080
0.08
250
7.8900
0.00083
4000
1.6
x
x
x
x
x
x
x
.100
0.1
250
5.6965
0.00450
3500
1.6
x
x
x
x
x
x
x
.125
0.125
250
3.8200
0.00478
2000
1.6
x
x
x
x
x
x
x
.160
0.16
250
2.5250
0.01000
2000
1.6
x
x
x
x
x
x
x
.200
0.2
250
1.7000
0.02000
1700
1.6
x
x
x
x
x
x
x
.250
0.25
250
1.2325
0.04000
1400
1.6
x
x
x
x
x
x
x
.315
0.315
250
0.8800
0.11000
1300
1.6
x
x
x
x
x
x
x
.400
0.4
250
0.2770
0.12500
1200
1.6
x
x
x
x
x
x
x
x
.500
0.5
250
0.2065
0.21500
1000
1.6
x
x
x
x
x
x
x
x
.630
0.63
250
0.1900
0.41000
650
1.6
x
x
x
x
x
x
x
x
.800
0.8
250
0.1203
0.85000
240
1.6
x
x
x
x
x
x
x
x
001.
1
250
0.0964
1.04500
200
1.6
x
x
x
x
x
x
x
x
x
1.25
1.25
250
0.0701
2.23000
200
1.6
x
x
x
x
x
x
x
x
x
01.6
1.6
250
0.0528
4.61500
190
1.6
x
x
x
x
x
x
x
x
x
002.
2
250
0.0416
5.73000
170
1.6
x
x
x
x
x
x
x
x
x
02.5
2.5
250
0.0334
9.46000
170
1.6
x
x
x
x
x
x
x
x
x
3.15
3.15
250
0.0224
17.72000
150
2.5
x
x
x
x
x
x
x
x
x
004.
4
250
[email protected]
0.0165
29.16500
130
2.5
x
x
x
x
x
x
x
x
x
005.
5
250
[email protected]
0.0137
42.79500
130
2.5
x
x
x
x
x
x
x
x
x
06.3
6.3
250
[email protected]
0.0095
62.46500
130
2.5
x
x
x
x
x
x
x
x
x
008.
8
250
[email protected]
0.0068
198.16000
130
4
x
x
x
x*
010.
10
250
[email protected]
0.0063
217.63500
130
4
x
x
x
x*
015.
15
250
[email protected]
0.0040
607.13500
130
4
x
x
x*
Amp
Code
Amp
Rating
(A)
Voltage
Rating
(V)
.032
0.032
.040
0.04
.050
Interrupting
Rating
[email protected]
Agency Approvals
PS
E
* Approval for cartidge versions only.
Temperature Rerating Curve
0.032A
0.040A
0.050A
0.063A
0.080A
0.100A
0.125A
0.160A
0.200A
0.250A
0.315A
0.400A
0.500A
0.630A
0.800A
1A
1.25A
1.6A
2A
2.5A
3.15A
4A
5A
6.3A
8A
10A
15A
Average Time Current Curves
10000
1000
TIME IN SECONDS
100
10
1
0.1
0.01
0.001
0.01
0.1
1
10
100
100
CURRENT IN AMPERES
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
217 Series
266
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/217.html for current information.
Axial Lead & Cartridge Fuses
5×20 mm > Fast-Acting > 217 Series
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
Lead-Free Recommendation
200
Preheat:
180
(Depends on Flux Activation Temperature)
160
140
120
100
80
60
40
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Recommended Hand-Solder Parameters:
Time (Seconds)
Cooling Time
Preheat Time
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Material
Body: Glass
Cap: Nickel–plated brass
Leads: Tin–plated Copper
Terminal Strength
MIL-STD-202G, Method 211A, Test
Condition A
Solderability
Reference IEC 60127 Second
Edition 2003-01 Annex A
Product Marking
Cap1: Brand logo, current and
voltage ratings
Cap2: Agency approval marks
Packaging
Available in Bulk (M=1000 pcs/pkg)
or on Tape/Reel (MRET1=1000 pcs/
reel)
Operating Temperature
–55OC to +125OC
Thermal Shock
MIL-STD-202G, Method 107G, Test
Condition B: (5 cycles –65°C to
+125°C)
Vibration
MIL-STD-202G, Method 201A
Humidity
Salt Spray
MIL-STD-202G, Method 103B, Test
Condition A. high RH (95%) and
elevated temperature (40°C) for 240
hours.
MIL-STD-202G, Method 101D, Test
Condition B
217 Series
Product Characteristics
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/217.html for current information.
267
217 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
5×20 mm > Fast-Acting
> 217 Series
Dimensions
Part Numbering System
20+0.5
0217 000P
0217 xxxx M X E P
5.2+0.1
-0.2
Series
5.1+0.6
5.1+0.6
Amp Code
Refer to Amp Code column of
Electrical Characteristics Table
0217.032 XEP
to
0217.315 XEP
22.5 MAX
40
6.0 MAX
Quantity Code
M = 1000
ø6.5
Packaging Code
X = Filler
Option Codes
0217.400 XEP
to
0217015 XEP
22.5 MAX
40
Blank = Cartridge Type Fuse
E
= Axial Leaded Fuse
5.8 MAX
Lead-free
ø6.5*
All dimensions in mm
Notes:
* Ratings above 6.3A
have 0.8 mm dia lead
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
Taping Width
Bulk
N/A
1000
MX
N/A
Bulk
N/A
1000
MXE
N/A
Reel and Tape
EIA 296-E
1000
MRET1
T1=52mm (2.062”)
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
217 Series
268
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/217.html for current information.
Axial Lead & Cartridge Fuses
5×20 mm > Time-Lag > 218 Series
218 Series,
PS
E
5 x 20 mm, Time-Lag (Slo-Blo®) Fuse
Description
5x20mm time-Lag glass body cartridge fuse designed to
IEC specification.
Features
specification for timeLag fuses
t %FTJHOFEUP
International (IEC )
Standards for use
globally
t "WBJMBCMFJODBSUSJEHF
and axial lead form
t .FFUTUIF*&$
60127-2, Sheet 3
t 3P)4DPNQMJBOUBOE
lead-free
Agency Approvals
PS
E
Agency File Number
Cartridge Certificates:
NBK120802-E10480 A&C
Leaded Certificates:
NBK120802-E10480 B&D
Certificates:
2002010207007596
Applications
Ampere Range
Used as supplementary protection in appliance or
utilization equipment to provide individual protection for
components or internal circuits.
1A – 5A
6.3A – 15A
32mA – 6.3A
Certificates:
SU05001-3005
SU05001-2008
SU05001-2009
32mA – 40mA
50mA – 800mA
1A – 10A
Recognised File:
E10480
Guide:
JDYX2
32mA – 16A
File:
029862
Acc. Class:
LR1422-30
32mA – 15A
License:
KM41462
80mA – 6.3A
File:
9850004, 9843043,
811742, 304650, 416270
32mA – 6.3A
License:
40013496
32mA – 10A
License:
40016604
15A*
Electrical Characteristics
% of Ampere
Rating
150%
210%
275%
400%
1000%
32mA – 16A
Ampere Rating
Opening Time
32mA–100mA
60 minutes, Minimum
125mA-6.3A
60 minutes, Minimum
8A-15A
30 minutes, Minimum
32mA-100mA
120 sec., Maximum
125mA-6.3A
120 sec., Maximum
8A-15A
120 sec., Maximum
32mA-100mA
200 ms., Min.; 10 sec. Max.
125mA-6.3A
600 ms., Min.; 10 sec. Max.
8A-15A
600 ms., Min.; 10 sec. Max.
32mA-100mA
40 ms., Min.; 3 sec. Max.
125mA-6.3A
150 ms., Min.; 3 sec. Max.
8A-15A
150 ms., Min.; 3 sec. Max.
32mA-100mA
10 ms., Min.; 300 ms. Max.
125mA-6.3A
20 ms., Min.; 300 ms. Max.
8A-15A
20 ms., Min.; 300 ms. Max.
218 Series
Agency
* Approval for Cartridge versions only
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/218.html for current information.
269
Revised: Feb 19, 2009
218 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
5×20 mm > Time-Lag
> 218 Series
Electrical Characteristics
Voltage
Rating
(V)
Nominal
Cold
Resistance
(Ohms)
Nominal
Power
Dissipation
At Rated
Current
(W)
Agency Approvals
Amp
Code
.032
0.032
250
58.4500
0.00297
5000
1.6
x
x
x
x
x
x
x
.040
0.04
250
35.7000
0.00536
4000
1.6
x
x
x
x
x
x
x
Interrupting
Rating
Nominal
Melting
I2t (A2 sec)
Nominal
Voltage
Drop at
Rated
Current
(mV)
Amp
Rating
(A)
PS
E
.050
0.05
250
23.3000
0.00692
3500
1.6
x
x
x
x
x
x
x
.063
0.063
250
17.6500
0.0117
3000
1.6
x
x
x
x
x
x
x
.080
0.08
250
12.6000
0.0258
2500
1.6
x
x
x
x
x
x
x
x
.100
0.1
250
8.9050
0.0482
2000
1.6
x
x
x
x
x
x
x
x
.125
0.125
250
4.2000
0.1465
1900
1.6
x
x
x
x
x
x
x
x
.160
0.16
250
2.5500
0.2190
1500
1.6
x
x
x
x
x
x
x
x
.200
0.2
250
1.6000
0.3410
1300
1.6
x
x
x
x
x
x
x
x
.250
0.25
250
1.0495
0.5405
1100
1.6
x
x
x
x
x
x
x
x
.315
0.315
250
0.8475
1.1100
1000
1.6
x
x
x
x
x
x
x
x
.400
0.4
250
0.5350
1.3250
900
1.6
x
x
x
x
x
x
x
x
[email protected]
.500
0.5
250
0.3700
2.8250
300
1.6
x
x
x
x
x
x
x
x
.630
0.63
250
0.2750
4.6750
250
1.6
x
x
x
x
x
x
x
x
.800
0.8
250
0.0813
3.370
150
1.6
x
x
001.
1
250
0.0613
6.730
150
1.6
x
x
1.25
1.25
250
0.0446
12.650
150
1.6
x
x
x
x
x
x
x
x
x
01.6
1.6
250
0.0336
23.350
150
1.6
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
002.
2
250
0.0293
14.450
150
1.6
x
x
x
x
x
x
x
x
x
02.5
2.5
250
0.0219
23.250
120
1.6
x
x
x
x
x
x
x
x
x
3.15
3.15
250
0.0173
38.150
100
1.6
x
x
x
x
x
x
x
x
x
004.
4
250
40A @ 250Vac
0.0129
69.10
100
1.6
x
x
x
x
x
x
x
x
x
005.
5
250
50A @ 250Vac
0.0104
111.00
100
1.6
x
x
x
x
x
x
x
x
x
06.3
6.3
250
63A @ 250Vac
0.0076
198.50
100
1.6
x
x
x
x
x
x
x
x
x
008.
8
250
80A @ 250Vac
0.0059
341.50
100
4
x
x
x
x
x
x
010.
10
250
100A @ 250Vac
0.0045
568.00
100
4
x
x
x
x
x
x
12.5
12.5
250
63A @ 250Vac
0.0034
889.00
100
4
x
x
x
015.
15
250
100A @ 250Vac
0.0028
1405.00
100
4
016.
16
250
63A @ 250Vac
0.0021
1955.00
100
4
x
x
x*
x
x
* Approval for cartidge versions only.
Temperature Rerating Curve
15A
0.032A
0.040A
0.050A
0.063A
0.080A
0.100A
0.125A
0.160A
0.200A
0.250A
0.315A
0.400A
0.500A
0.630A
0.800A
1A
1.25A
1.6A
2A
2.5A
3.15A
4A
5A
6.3A
8A
10A
Average Time Current Curves
10000
1000
TIME IN SECONDS
100
10
1
0.1
0.01
0.001
0.01
0.1
1
10
100
1000
CURRENT IN AMPERES
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
218 Series
270
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/218.html for current information.
Axial Lead & Cartridge Fuses
5×20 mm > Time-Lag > 218 Series
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
Lead-Free Recommendation
200
Preheat:
180
(Depends on Flux Activation Temperature)
160
140
120
100
80
60
40
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Recommended Hand-Solder Parameters:
Time (Seconds)
Cooling Time
Preheat Time
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Material
Body: Glass
Cap: Nickel–plated brass
Leads: Tin–plated Copper
Terminal Strength
MIL-STD-202G, Method 211A, Test
Condition A
Solderability
Reference IEC 60127 Second
Edition 2003-01 Annex A
Product Marking
Cap1: Brand logo, current and
voltage ratings
Cap2: Agency approval marks
Packaging
Available in Bulk (M=1000 pcs/pkg)
or on Tape/Reel (MRET1=1000 pcs/
reel)
Operating Temperature
–55ºC to +125ºC
Thermal Shock
MIL-STD-202G, Method 107G, Test
Condition B: (5 cycles –65°C to
+125°C)
Vibration
MIL-STD-202G, Method 201A
Humidity
Salt Spray
MIL-STD-202G, Method 103B, Test
Condition A. high RH (95%) and
elevated temperature (40°C) for 240
hours.
MIL-STD-202G, Method 101D, Test
Condition B
218 Series
Product Characteristics
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/218.html for current information.
271
218 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
5×20 mm > Time-Lag
> 218 Series
Dimensions
Part Numbering System
0218 xxxx M X E P
20+0.5
5.2+0.1
-0.2
0218 000P
5.1+0.6
Series
5.1+0.6
Amp Code
Refer to Amp Code column of
Electrical Characteristics Table
0218.032 XEP
to
0218.100XEP
40
6.0 MAX
22.5 MAX
Quantity Code
M = 1000
0.65
Packaging Code
X = Filler
0218.125 XEP
to
0218016. XEP
40
Option Codes
5.8 MAX
22.5 MAX
Blank : Cartidge Type Fuse
E
: Axial Leaded Fuse
Lead-free
0.65*
All dimensions in mm
Notes:
* Ratings above 6.3A
have 0.8 mm dia lead
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
Taping Width
Bulk
N/A
1000
MX
N/A
Bulk
N/A
1000
MXE
N/A
Reel and Tape
EIA 296-E
1000
MRET1
T1=52mm (2.062”)
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
218 Series
272
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/218.html for current information.
Axial Lead & Cartridge Fuses
5×20 mm > Time-Lag > 213 Series
213 Series,
PS
E
5 x 20 mm, Time-Lag (Slo-Blo®) Fuse
Description
5x20mm time-Lag surge withstand glass body cartridge
fuse designed to IEC specification.
Features
t %FTJHOFEUP
International (IEC )
Standards for use
globally
t .FFUTUIF*&$
60127-2, Sheet 3
specification for timeLag fuses
t "WBJMBCMFJODBSUSJEHF
and axial lead form
t 3P)4DPNQMJBOUBOE
lead-free.
Agency Approvals
PS
E
Agency File Number
Cartridge Certificates:
NBK120802-E10480 A&C
Leaded Certificates:
NBK120802-E10480 B&D
Certificates:
2002010207007597
2003010207045592
Recognised File:
E10480
Guide:
JDYX2
File:
029862
Acc. Class:
LR1422-30
License:
KM41462
File:
9905092, 9923025,
304515, 811747
License:
40015638
Applications
Ampere Range
Used as supplementary protection in appliance or
utilization equipment to provide individual protection for
components or internal circuits.
1A – 5A
6.3A
200mA – 6.3A
5A
Electrical Characteristic for Series
% of Ampere
Rating
200mA – 6.3A
Ampere Rating
Opening Time
150%
60 minutes, Minimum
210%
2 minutes, Maximum
275%
0.6 sec., Min.; 10 sec. Max.
All Ratings
400%
.15 sec., Min.; 3 sec. Max.
1000%
0.02 sec., Min.; 0.3 sec. Max.
213 Series
Agency
200mA – 4A, 6.3A
200mA – 6.3A
Electrical Characteristic Specifications by Item
Amp
Code
Ampere
Rating
Voltage
Rating
(V)
.200
.250
.315
.400
.500
.630
.800
001.
1.25
01.6
002.
02.5
3.15
004.
005.
06.3
0.2
0.25
0.315
0.4
0.5
0.63
0.8
1
1.25
1.6
2
2.5
3.15
4
5
6.3
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
Interrupting
Rating
[email protected]
[email protected]
[email protected]
[email protected]
Nominal
Nominal
Cold
Melting
Resistance 2
I t (A2 sec)
(Ohms)
1.6000
1.0495
0.8475
0.5350
0.3700
0.2750
0.1635
0.1165
0.0817
0.0551
0.0452
0.0305
0.0231
0.0170
0.0116
0.0095
0.22500
0.55500
1.14000
1.36000
2.90500
4.80000
9.42000
19.20000
27.15000
44.20000
92.70500
138.00000
202.00000
226.50500
314.00000
600.00000
Agency Approvals
Nominal
Nominal
Voltage
Power
Drop
Dissipation
(mV)
(W)
1500
1300
1100
1000
900
300
250
150
150
150
150
120
100
100
100
100
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
PS
E
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/213.html for current information.
273
Revised: Jan 12, 2009
213 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
5×20 mm > Time-Lag
> 213 Series
Average Time Current Curves
0.200A
0.250A
0.315A
0.400A
0.500A
0.630A
0.800A
1A
1.25A
1.6A
2A
2.5A
3.15A
4A
5A
6.3A
Temperature Rerating Curve
10000
1000
TIME IN SECONDS
100
10
1
0.1
0.01
0.001
0.1
1
10
100
1000
CURRENT IN AMPERES
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
200
Preheat:
180
(Depends on Flux Activation Temperature)
160
140
120
100
80
60
40
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Recommended Hand-Solder Parameters:
Time (Seconds)
Cooling Time
Preheat Time
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
213 Series
274
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/213.html for current information.
Axial Lead & Cartridge Fuses
5×20 mm > Time-Lag > 213 Series
Product Characteristics
Material
Body: Glass
Cap: Nickel–plated brass
Leads: Tin–plated Copper
Terminal Strength
MIL-STD-202G, Method 211A, Test
Condition A
Solderability
Reference IEC 60127, Second Edition
2003-01, Annex A
Product Marking
Cap1: Brand logo, current and voltage
Operating Temperature
–55ºC to +125ºC
Thermal Shock
MIL-STD-202G, Method 107G, Test
Condition B: (5 cycles –65°C to
+125°C)
Vibration
MIL-STD-202G, Method 201A
MIL-STD-202G, Method 103B, Test
Condition A. High RH (95%) and
elevated temperature (40°C) for 240
hours.
MIL-STD-202G, Method 101D, Test
Condition B
Humidity
Cap2: Agency approval marks Series
Packaging
Salt Spray
Available in Bulk (M=1000 pcs/pkg) or
on Tape/Reel (MRET1=1000 pcs/reel)
Dimensions
Part Numbering System
0213 xxxx M X E P
20+0.5
0213 000P
Series
5.2+0.1
-0.2
Amp Code
5.1+0.6
0213 000 XEP
40
Refer to Amp Code column of
Electrical Characteristics Table
5.1+0.6
Quantity Code
5.8 MAX
22.5 MAX
M = 1000
Packaging Code
X = Filler
0.65
Option Codes
All dimensions in mm
Blank : Cartidge Type Fuse
E
: Axial Leaded Fuse
Notes:
* Ratings above 6.3A
have 0.8 mm dia lead
Packaging
Packaging Option
213 Series
Bulk
Bulk
Reel and Tape
Packaging Specification
Quantity
Quantity &
Packaging Code
Taping Width
N/A
N/A
EIA 296-E
1000
1000
1000
MX
MXE
MRET1
N/A
N/A
T1=52mm (2.062”)
213 Series
Lead-free
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/213.html for current information.
275
213 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
276
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Axial Lead & Cartridge Fuses
5×20 mm > Time-Lag > 219XA Series
219XA Series,
PS
E
5x20mm, Time-Lag (Slo-Blo®) Fuse
Description
5x20mm time-Lag glass body cartridge fuse designed to
IEC specification
Features
Agency Approvals
Agency File Number
PS
E
Cartridge Certifications:
NBK220604-E10480A
NBK230604-E10480A
Leaded Certifications:
NBK220604-E10480B
NBK230604-E10480B
Certifications:
2004010207110266
2003010207079982
Recognised File:
E10480
Guide:
JDYX2
t "WBJMBCMFJODBSUSJEHF
and axial lead form
t .FFUTUIF*&$
60127-2, Sheet 6
t 3P)4DPNQMJBOUBOE
lead-free
Applications
Ampere Range
Used as supplementary protection in appliance or
utilization equipment to provide individual protection for
components or internal circuits.
1A – 5A
6.3A
1A – 5A
6.3A
Electrical Characteristics for Series
125mA – 800mA
1A – 6.3A
% of Ampere
Rating
150%
40mA – 6.3A
210%
File and Acc. Class:
029862_0_000
License:
KM41462
File:
604904/604924
402708
310144
License:
40016080
275%
125mA – 6.3A
400%
40mA – 100mA
125mA – 800mA
1A – 6.3A
1000%
125mA – 6.3A
Ampere Rating
Opening Time
40mA – 100mA
1 hours, Minimum
125mA – 6.3A
1 hours, Minimum
40mA – 100mA
2 minutes, Maximum
125mA – 6.3A
2 minutes, Maximum
40mA – 100mA
0.2 sec., Min; 10 sec. Max
125mA – 6.3A
0.6 sec., Min; 10 sec. Max
40mA – 100mA
0.04 sec., Min; 3 sec. Max
125mA – 6.3A
.15 sec., Min; 3 sec. Max
40mA – 100mA
.01 sec., Min; 0.3 sec. Max
125mA – 6.3A
.02 sec., Min; 0.3 sec. Max
219XA Series
Agency
specification for timeLag fuses
t %FTJHOFEUP
International (IEC )
Standards for use
globally
40mA – 6.3A
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/219XA.html for current information.
277
Revised: Jan 12, 2009
219XA Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
5×20 mm > Time-Lag >Transientology
219XA Series
Electrical Characteristic Specifications by Item
Nominal
Melting
I2t
(A2 sec)
Nominal
Voltage
Drop at
Rated
Current
(mV)
Nominal
Power
Dissipation
at Rated
Current
(W)
Agency Approvals
Amp
Code
Nominal
Amp Voltage
Interrupting
Cold
Rating Rating
Rating
Resistance
(A)
(V)
(Ohms)
.040
0.040
250
31.8620
0.01100
4000
1.6
x
x
x
.050
0.050
250
21.2920
0.01700
3500
1.6
x
x
x
.063
0.063
250
14.2685
0.02850
3000
1.6
x
x
x
.100
0.100
250
6.0180
0.07900
2500
1.6
x
x
x
PS
E
.125
0.125
250
4.2000
0.13000
2000
1.6
x
x
x
x
x
x
x
.160
0.160
250
2.5500
0.31000
1900
1.6
x
x
x
x
x
x
x
.200
0.200
250
1.6000
0.32000
1500
1.6
x
x
x
x
x
x
x
.250
0.250
250
1.0495
0.54000
1300
1.6
x
x
x
x
x
x
x
.315
0.315
250
0.8475
1.23000
1100
1.6
x
x
x
x
x
x
x
.400
0.400
250
0.5350
1.40000
1000
1.6
x
x
x
x
x
x
x
.500
0.500
250
0.3700
3.00000
900
1.6
x
x
x
x
x
x
x
0.2750
4.82000
300
1.6
x
x
x
x
x
x
x
0.1635
9.35000
250
1.6
x
x
x
x
x
x
x
.630
0.630
250
.800
0.800
250
150A @
250VAC
001.
1.00
250
0.1165
19.20000
150
1.6
x
x
x
x
x
x
x
x
1.25
1.25
250
0.0817
27.15000
150
1.6
x
x
x
x
x
x
x
x
01.6
1.60
250
0.0551
44.20000
150
1.6
x
x
x
x
x
x
x
x
002.
2.00
250
0.0452
92.70500
150
1.6
x
x
x
x
x
x
x
x
02.5
2.50
250
0.0305
138.00000
120
1.6
x
x
x
x
x
x
x
x
3.15
3.15
250
0.0231
202.00000
100
1.6
x
x
x
x
x
x
x
x
004.
4.00
250
0.0158
330.00000
100
1.6
x
x
x
x
x
x
x
x
005.
5.00
250
0.0117
544.00000
100
1.6
x
x
x
x
x
x
x
x
06.3
6.3
250
0.0117
1093.03500
100
1.6
x
x
x
x
x
x
x
x
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
219XA Series
278
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/219XA.html for current information.
Axial Lead & Cartridge Fuses
5×20 mm > Time-Lag > 219XA Series
2.5A
3.15A
4A
5A
6.3A
Average Time Current Curves
0.125A
0.160A
0.200A
0.250A
0.315A
0.400A
0.500A
0.630A
0.800A
1A
1.25A
1.6A
2A
Temperature Rerating Curve
10000
1000
TIME IN SECONDS
100
10
1
0.1
0.01
0.001
0.01
1
10
100
1000
CURRENT IN AMPERES
Soldering Parameters - Wave Soldering
260
Wave Parameter
240
220
200
Preheat:
180
(Depends on Flux Activation Temperature)
160
140
120
100
80
60
40
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
219XA Series
Recommended Process Parameters:
280
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Recommended Hand-Solder Parameters:
Time (Seconds)
Cooling Time
Preheat Time
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/219XA.html for current information.
279
219XA Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
5×20 mm > Time-Lag >Transientology
219XA Series
Product Characteristics
Materials
Body: Glass
Cap: Nickel Plated Brass
Leads: Tin Plated Copper
Operating Temperature
–55ºC to +125ºC
Terminal Strength
MIL-STD-202G, Method 211A.
Test Condition A
Shock
MIL-STD-202G, Method 107G, Test
Condition B: (5 cycles –65OC to
+125OC)
Solderability
Reference IEC 60127 Second Edition
2003-01 Annex A
Vibration
MIL-STD-202G, Method 201A
Product Marking
Cap 1: Brand logo, current and voltage
rating
Cap 2: Agency approval markings Series
Humidity
MIL-STD-202G, Method 103B, Test
Condition A high RH (95%) and
elevated temperature (40O C) for 240
hours.
Packaging
Available in Bulk (M=1000 pcs/pkg) or on
Tape/Reel (MRET1=1000 pcs/reel)
Salt Spray
MIL-STD-202F Method 101D, Test
Condition B
Dimensions
Part Numbering System
5.2+0.1
-0.2
5.1+0.6
0219000XAEP
0219 xxxx M XA E P
20+0.5
0219 000XAP
40
Series
5.1+0.6
22.5 MAX
Amp Code
Refer to Amp Code column of
Electrical Characteristics Table
5.8 MAX
Quantity Code
M = 1000
0.65*
Packaging Code
All dimensions in mm
X = Filler
A = Enhanced l sq t
Notes:
* Ratings above 6.3A
have 0.8 mm dia lead
Option Codes
Blank : Cartidge Type Fuse
E
: Axial Leaded Fuse
Lead-free
Packaging
Packaging Option
219XA Series
Bulk
Bulk
Reel and Tape
Packaging Specification
Quantity
Quantity &
Packaging Code
Taping Width
N/A
N/A
N/A
1000
1000
1000
MXA
MXAE
MRAET1
N/A
N/A
T1=52mm (2.062”)
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
219XA Series
280
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/219XA.html for current information.
Axial Lead & Cartridge Fuses
5×20 mm > Fast-Acting > 216 Series
216 Series,
PS
E
5 x 20 mm, Fast-Acting Fuse
Description
5x20mm fast-acting ceramic body cartridge fuse designed
to IEC specification.
Features
t %FTJHOFEUP
International (IEC )
Standards for use
globally
t .FFUTUIF*&$
2, sheet 1 specification
for fast-acting fuses
t "WBJMBCMFJODBSUSJEHF
and axial lead form
t 3P)4DPNQMJBOUBOE
lead-free
Agency Approvals
Applications
PS
E
Agency File Number
Cartridge Certificates:
NBK2508\702-E10480 A&C
NBK250702-E10480 E
Leaded Certificates:
NBK250702-E10480 B & D
NBK250702-E10480 F
Certificates:
2003010207079960
2002010207007594
Ampere Range
Used as supplementary protection in appliance or
utilization equipment to provide individual protection for
components or internal circuits.
1A – 10A
Electrical Characteristics for Series
50mA – 800mA
1A - 6.3A
Certificates:
SU05001-2013
% of Ampere
Rating
1A - 10A
Recognised File:
E10480
Guide:
JDYX2
150%
210%
50mA – 10A
12.5A, 16A
File:
029862
Acc. Class:
LR1422-30
275%
License:
KM41462
1A – 6.3A
File:
9851193, 0149272
0147099 and 811745
508639, 601025
50mA – 6.3A
8A&10A,16A
License:
40013834
50mA – 6.3A
*8A, *10A
License:
40016442
*12.5A
400%
1000%
Ampere Rating
Opening Time
50mA – 4A
60 minutes, Minimum
5A – 6.3A
60 minutes, Minimum
8A – 16A
30 minutes, Minimum
50mA – 4A
30 minutes, Maximum
5A – 6.3A
30 minutes, Maximum
8A – 16A
30 minutes, Maximum
50mA – 4A
0.01 sec.., Min.; 2 sec. Max.
5A – 6.3A
0.01 sec.., Min.; 3 sec. Max.
8A – 16A
0.04 sec., Min.; 20 sec. Max.
50mA – 4A
.003 sec., Min.; 0.3 sec. Max.
5A – 6.3A
.003 sec., Min.; 0.3 sec. Max.
8A – 16A
.01 sec.., Min.; 1.0 sec. Max.
50mA – 4A
.02 seconds, Maximum
5A – 6.3A
.02 seconds, Maximum
8A – 16A
.03 sec.onds, Maximum
216 Series
Agency
50mA – 16A
*Approval for Cartridge versions only
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/216.html for current information.
281
Revised: Jan 12, 2009
216 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
5×20 mm > Fast-Acting
> 216 Series
Electrical Characteristics Specifications by Item
Amp Voltage
Amp
Rating Rating
Code
(A)
(V)
Interrupting
Rating
Nominal
Nominal
Cold
Melting
Resistance 2
I t (A2 sec)
(Ohms)
Nominal
Nominal
Voltage
Power
Drop at Dissapation
Rated
at Rated
Current
Current
(mV)
(W)
10000
1.6
Agency Approvals
PS
E
.050
0.05
250
15.9000
0.00019
x
x
x
x
x
.063
0.63
250
10.4500
0.00054
8800
1.6
x
x
x
x
x
x
x
.080
0.8
250
7.8850
0.00084
7600
1.6
x
x
x
x
x
x
.100
0.1
250
5.7925
0.00450
7000
1.6
x
x
x
x
x
x
.125
0.125
250
3.6750
0.00546
5000
1.6
x
x
x
x
x
x
.160
0.16
250
5.3490
0.00576
4300
1.6
x
x
x
x
x
x
.200
0.2
250
3.3500
0.00439
3500
1.6
x
x
x
x
x
x
.250
0.25
250
2.3500
0.00891
2800
2.5
x
x
x
x
x
x
.315
0.315
250
1.8500
0.01000
2500
2.5
x
x
x
x
x
x
.400
0.4
250
0.9065
0.04000
2000
2.5
x
x
x
x
x
x
.500
0.5
250
0.8660
0.16500
1800
2.5
x
x
x
x
x
x
.630
0.63
250
0.4650
0.17500
1500
2.5
x
x
x
x
x
x
.800
0.8
250
0.2950
0.28500
1200
2.5
x
x
x
x
x
001.
1
250
0.2370
0.18000
1000
2.5
x
x
x
x
x
x
x
x
x
1.25
1.25
250
0.1530
0.48000
800
4
x
x
x
x
x
x
x
x
x
01.6
1.6
250
0.1112
1.00500
600
4
x
x
x
x
x
x
x
x
x
002.
2
250
0.0764
1.87000
500
4
x
x
x
x
x
x
x
x
x
02.5
2.5
250
0.0584
2.69500
400
4
x
x
x
x
x
x
x
x
x
3.15
3.15
250
0.0368
6.70000
350
4
x
x
x
x
x
x
x
x
x
004.
4
250
0.0247
14.99500
300
4
x
x
x
x
x
x
x
x
x
005.
5
250
0.0183
27.46000
250
4
x
x
x
x
x
x
x
x
x
06.3
6.3
250
0.0137
56.43000
200
4
x
x
x
x
x
x
x
x
x
008.
8
250
0.0123
64.31500
200
4
x
x
x
x
x
x*
x
010.
10
250
0.0079
154.34000
200
4
x
x
x
x
x
x*
12.5
12.5
250
0.0057
235.00000
200
4
x
x
016.
16
250
0.0040
462.50000
200
4.5
x
x
[email protected]
[email protected]
x
x
x
x
x*
x
* Approval for cartidge versions only.
Average Time Current Curves
0.050A
0.063A
0.080A
0.100A
0.125A
0.160A
0.200A
0.250A
0.315A
0.400A
0.500A
0.630A
0.800A
1A
1.25A
1.6A
2A
2.5A
3.15A
4A
5A
6.3A
8A
10A
12.5A
16A
Temperature Rerating Curve
10000
1000
TIME IN SECONDS
100
10
1
0.1
0.01
0.001
0.01
0.1
1
10
100
1000
CURRENT IN AMPERES
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
216 Series
282
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/216.html for current information.
Axial Lead & Cartridge Fuses
5×20 mm > Fast-Acting > 216 Series
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
Lead-Free Recommendation
220
Preheat:
200
(Depends on Flux Activation Temperature)
180
160
140
120
100
80
60
40
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
Recommended Hand-Solder Parameters:
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Time (Seconds)
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Cooling Time
Preheat Time
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Material
Terminal Strength
Solderability
Product Marking
Packaging
Body: Ceramic
Cap: Nickel–plated brass
Leads: Tin–plated Copper
Filler (160mA-16A): Sand
MIL-STD-202G, Method 211A, Test
Condition A
Reference IEC 60127 Second
Edition 2003-01 Annex A
Cap 1: Brand logo, current and
voLage rating
Cap 2: Agency approval markings
Operating Temperature
–55ºC to +125ºC
Thermal Shock
MIL-STD-202G, Method 107G, Test
Condition B: (5 cycles –65°C to
+125°C)
Vibration
MIL-STD-202G, Method 201A
Humidity
MIL-STD-202G, Method 103B, Test
Condition A. high RH (95%) and
elevated temperature (40°C) for 240
hours.
Available in Bulk (M=1000 pcs/pkg)
or on Tape/Reel (MRET1=1000 pcs/
reel)
Salt Spray
MIL-STD-202G, Method 101D, Test
Condition B
216 Series
Product Characteristics
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/216.html for current information.
283
216 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
5×20 mm > Fast-Acting
> 216 Series
Dimensions
Part Numbering System
0216 xxxx M X E P
20+0.5
0216 000XP
5.2+0.1
-0.2
5.1+0.6
0216.050XEP
to
0216.800XEP
40
Series
5.1+0.6
22.5 MAX
Amp Code
Refer to Amp Code column of
Electrical Characteristics Table
6.0 MAX
Quantity Code
M = 1000
0.65
Packaging Code
X = Filler
0216001.XEP
to
0216016.XEP
40
22.5 MAX
Option Codes
5.8 MAX
Blank : Cartidge Type Fuse
E
: Axial Leaded Fuse
0.65**
Lead-free
All dimensions in mm
** Ratings above 6.3A have 0.8 mm diameter lead
Packaging
Packaging Option
216 Series
Bulk
Bulk
Reel and Tape
Packaging Specification
Quantity
Quantity &
Packaging Code
Taping Width
N/A
N/A
EIA 296-E
1000
1000
1000
MX
MXE
MRET1
N/A
N/A
T1=52mm (2.062”)
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
216 Series
284
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/216.html for current information.
Axial Lead & Cartridge Fuses
5×20 mm > Time-Lag > 215 Series
215 Series,
5 x 20 mm, Time-Lag (Slo-Blo®) Fuse
PS
E
Description
5x20mm time-Lag surge withstand ceramic body cartridge
fuse designed to IEC specification
Features
Agency Approvals
Agency File Number
PS
E
Cartridge Certificates:
NBK250702-E10480 C
NBK250702-E10480 E
NBK100408-JP1021A
Leaded Certificates:
NBK250702-E10480 D
NBK250702-E10480 F
NBK100408-JP1021B
.
Certificates:
2002010207007593
2005010207145714
Certificates:
SU05001– 2011
SU05001– 2012
Recognised File:
E10480
Guide:
JDYX2
t )JHICSFBLJOHDBQBDJUZ
t 3P)4DPNQMJBOUBOE
lead-free
Applications
Used as supplementary protection in appliance or
utilization equipment to provide individual protection for
components or internal circuits.
Ampere Range
1A – 5A
6.3A – 15A
16A – 25A
Electrical Characteristics for Series
1A – 5A
6.3A – 12A
16A – 25A
% of Ampere
Rating
4A – 6.3A
1A – 3.15A
150%
1A – 3.15A
4A – 10A
125mA – 160mA
500mA – 12A
15A – 25A
File:
029862
Acc. Class:
LR1422 – 30
500mA – 12A
License:
KM41462
200mA – 10A
License:
606726
403906
501856
0147100
709071
709302 & 713062
t .FFUTUIF*&$
60127-2, Sheet 5
specification for timeLag fuses
210%
275%
125mA, 160mA
200mA – 800mA, 8A, 10A
1A – 3.15A
4A – 6.3A
12A
*15A – *20A, *25A
License:
40013521
200mA – 8A
*10A
License:
40016610
*12A
400%
1000%
125mA – 25A
Ampere Rating
Opening Time
125mA – 800mA
60 minutes, Minimum
1A – 3.15A
60 minutes, Minimum
4A – 6A
60 minutes, Minimum
8A – 25A
30 minutes, Minimum
125mA – 800mA
30 minutes, Maximum
1A – 3.15A
30 minutes, Maximum
4A – 6A
30 minutes, Maximum
8A – 25A
30 minutes, Maximum
125mA – 800mA
.25 sec. Min., 80 sec. Max.
1A – 3.15A
.75 sec. Min., 80 sec. Max.
4A – 6A
.75 sec. Min., 80 sec. Max.
8A – 25A
.75 sec. Min., 80 sec. Max.
125mA – 800mA
.05 sec., Min. 5 sec. Max.
1A – 3.15A
.095 sec., Min. 5 sec. Max.
4A – 6A
.150 sec., Min. 5 sec. Max.
8A – 25A
.150 sec., Min. 5 sec. Max.
125mA – 800mA
.005 sec., Min. .150 sec. Max.
1A – 3.15A
.010 sec., Min. .150 sec. Max.
4A – 6A
.010 sec., Min. .150 sec. Max.
8A – 25A
.010 sec., Min. .150 sec. Max.
215 Series
Agency
t %FTJHOFEUP
International (IEC )
Standards for use
globally
* Approved for cartridge versions only
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/215.html for current information.
285
Revised: Mar 14, 2009
215 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
5×20 mm > Time-Lag
> 215 Series
Electrical Characteristic Specifications by Item
Nominal
Voltage
Interrupting
Amp Amp
Cold
Rating
Rating
Code Rating
Resistance
(V)
(Ohms)
Nominal
Melting
I2t
(A2 sec)
Nominal
Nominal
Power
Voltage Drop
at Rated Dissipation at
Rated Current
Current
(W)
(mV)
Agency Approvals
PS
E
.125
0.125
250
11.4455
0.0330
2600
1.6
x
x
x
.160
0.16
250
7.1000
0.0465
2400
1.6
x
x
x
.200
0.2
250
1.8400
0.340
2100
1.6
x
x
x
x
.250
0.25
250
1.2400
0.545
1500
1.6
x
x
x
x
.315
0.315
250
0.8800
0.975
1100
1.6
x
x
x
x
.400
0.4
250
0.5825
1.325
1000
1.6
.500
0.5
250
1.1675
0.420
850
1.6
x
x
x
x
x
x
x
x
x
x
.630
0.63
250
0.7200
0.635
650
1.6
x
x
x
x
x
x
.800
0.8
250
0.4675
0.975
500
1.6
x
x
x
x
x
x
001.
1
250
0.1515
1.520
350
2.5
x
x
x
x
x
x
0.1074
3.200
300
2.5
x
x
x
x
x
x
x
x
x
0.0707
6.830
200
2.5
x
x
x
x
x
x
x
x
x
1.25
1.25
250
01.6
1.6
250
1500A @
250VAC
x
x
x
002.
2
250
0.0566
11.680
190
2.5
x
x
x
x
x
x
x
x
x
02.5
2.5
250
0.0386
22.290
180
2.5
x
x
x
x
x
x
x
x
x
3.15
3.15
250
0.0283
43.255
140
4
x
x
x
x
x
x
x
x
x
004.
4
250
0.0185
46.960
100
4
x
x
x
x
x
x
x
x
x
005.
5
250
0.0153
66.095
100
4
x
x
x
x
x
x
x
x
x
06.3
6.3
250
0.0108
128.750
100
4
x
x
x
x
x
x
x
x
x
x
008.
8
250
0.0092
209.880
100
4
x
x
x
x
x
x
x
010.
10
250
0.0066
333.565
100
4
x
x
x
x
x
x
x*
012.
12
250
0.0061
515.500
100
4
x
x
x
015.
15
250
0.0033
1237.0
TBA**
TBA**
x
x*
x
016.
16
250
0.0031
1408.0
TBA**
TBA**
x
x*
x
020.
20
250
400A
0.0023
3986.5
TBA**
TBA**
x
x*
x
025.
25
250
300A
0.0021
5050.0
TBA**
TBA**
x
x*
x
500A
x
x
x*
x
* Approval for cartridge versions only
** TBA - Please contact Littelfuse for details on these parameters
1A to 2A have an IR : [email protected], 4A to 6-3A have the IR : [email protected] Vac and [email protected]
Temperature Rerating Curve
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
215 Series
286
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/215.html for current information.
Axial Lead & Cartridge Fuses
5×20 mm > Time-Lag > 215 Series
Average Time Current Curves
T-C Curves for 1A to 25A only
.125 A
.160 A
.200 A
.250 A
.315 A
.400 A
.500 A
.630 A
.800 A
1.00 A
1.25 A
1.60 A
2.00 A
2.50 A
3.15 A
4.00 A
5.00 A
6.30 A
8.00 A
10.0 A
12.0 A
15.0 A
16.0 A
20.0 A
25.0 A
T-C Curves for 125mA to 800mA only
1000
1000
100
100
TIME IN SECONDS
10000
TIME IN SECONDS
10000
10
1
10
0.1
0.1
0.01
0.01
0.001
0.001
0.1
1
10
100
0.1
1000
1
10
100
1000
CURRENT IN AMPERES
CURRENT IN AMPERES
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
Wave Parameter
240
220
200
Preheat:
180
(Depends on Flux Activation Temperature)
160
140
120
100
80
60
40
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
215 Series
260
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Recommended Hand-Solder Parameters:
Time (Seconds)
Cooling Time
Preheat Time
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/215.html for current information.
287
215 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
5×20 mm > Time-Lag
> 215 Series
Product Characteristics
Materials
Body: Ceramic
Cap: Nickel–plated brass
Leads: Tin–plated Copper
Operating Temperature
–55ºC to +125ºC
Terminal Strength
MIL-STD-202G, Method 211A, Test
Condition A
Thermal Shock
MIL-STD-202G, Method 107G, Test
Condition B: (5 cycles –65ºC to
+125ºC)
Solderability
Reference IEC 60127 Second Edition
2003-01 Annex A
Vibration
MIL-STD-202G, Method 201A
Product Marking
Cap 1: Brand logo, current and voltage
ratings
Cap 2: Agency approval markings
Humidity
MIL-STD-202G, Method 103B, Test
Condition A. high RH (95%) and
elevated temp (40ºC) for 240 hours.
Salt Spray
MIL-STD-202G, Method 101D, Test
Condition B
Dimensions
Part Numbering System
0215 xxxx M X E P
Series
Amp Code
Refer to Amp Code column of
Electrical Characteristics Table
Quantity Code
M = 1000
Packaging Code
X = Filler
Option Codes
Blank : Cartidge Type Fuse
E
: Axial Leaded Fuse
( Not available for 215 series,
15A to 25A )
Lead-free
Packaging
Packaging Option
215 Series
Bulk
Bulk
Reel and Tape
Packaging Specification
Quantity
Quantity &
Packaging Code
Taping Width
N/A
N/A
N/A
1000
1000
1000
MX
MXE
MRET1
N/A
N/A
T1=52mm (2.062”)
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
215 Series
288
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/215.html for current information.
Axial Lead & Cartridge Fuses
5×20 mm > Medium-Acting > 232 Series
232 Series,
PS
E
5 x 20 mm, Medium-Acting Fuse
Description
5x20mm medium–acting glass body cartridge fuse
designed to Meti B Standard.
Features
t %FTJHOFEUP+BQBOFTF
Standard JIS C6575
t 3P)4DPNQMJBOUBOE
lead-free
t "WBJMBCMFJODBSUSJEHF
and axial lead format
Applications
Agency Approvals
Agency
PS
E
Agency File Number
Ampere Range
Cartridge Certificates:
NBK260202-E10480 B
NBK290502-E10480 D
1A – 5A
6.3A – 10A
Leaded Certificates:
NBK290502-E10480 B
NBK290502-E10480 F
1A – 5A
6.3A – 10A
Used as supplementary protection in appliance or
utilization equipment to provide individual protection for
components or internal circuits.
Electrical Characteristics for Series
Certificates:
SU05001-2015
% of Ampere
Rating
Opening Time
130%
1 hour, Minimum
160%
1 hour, Maximum
200%
2 minutes, Maximum
1A – 10A
1A – 10A
Nominal Cold
Resistance
(Ohms)
Nominal
Melting
I2t
(A2 sec)
125/250
0.0923
1.37300
x
x
x
1.25
125/250
0.0685
4.11000
x
x
x
1.6
125/250
0.0537
6.96000
x
x
x
002.
2
125/250
0.0370
8.25000
x
x
x
02.5
2.5
125/250
0.0291
13.87500
x
x
x
003.
3
125/250
0.0226
17.19000
x
x
x
3.15
3.15
125/250
0.0215
21.9500
x
x
x
004.
4
125/250
0.0174
37.73000
x
x
x
005.
5
125/250
0.0134
56.72000
x
x
x
06.3
6.3
125/250
0.0102
90.41500
x
x
x
008.*
8
125/250
0.0076
182.58000
x
x
x
010.*
10
125/250
0.0059
290.66500
x
x
x
Amp Code
Amp Rating
(A)
Voltage
Rating
(V)
001.
1
1.25
01.6
Interrupting
Rating
10,000A @ 125VAC
300A @ 125VAC
Agency Approvals
PS
E
232 Series
Electrical Characteristic Specifications by Item
To order 125Vac rated, please add part no. suffix
* Interrupting Rating for 8A & 10A is [email protected]
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/232.html for current information.
289
Revised: Jan 12, 2009
232 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
5×20 mm > Medium-Acting
> 232 Series
Average Time Current Curves
1A
1.25A
1.6A
2A
2.5A
3A
3.15A
4A
5A
6.3A
8A
10A
Temperature Rerating Curve
10000
1000
TIME IN SECONDS
100
10
1
0.1
0.01
0.001
1
100
10
1000
CURRENT IN AMPERES
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
200
Preheat:
180
(Depends on Flux Activation Temperature)
160
140
120
100
80
60
40
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Recommended Hand-Solder Parameters:
Time (Seconds)
Cooling Time
Preheat Time
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
232 Series
290
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/232.html for current information.
Axial Lead & Cartridge Fuses
5×20 mm > Medium-Acting > 232 Series
Product Characteristics
Materials
Body: Glass
Cap: Nickel–plated brass
Leads: Tin–plated Copper
Operating Temperature
–55ºC to +125ºC
Terminal Strength
MIL-STD-202G, Method 211A.
Test Condition A
Thermal Shock
MIL-STD-202G, Method 107G, Test
Condition B: (5 cycles –65OC +
125OC)
Solderability
Reference IEC 60127 Second Edition
2003-01 Annex A
Vibration
MIL-STD-202G, Method 201A
Product Marking
Cap 1: Brand log, current and voltage
ratings, and agency approval
Cap 2: Blank
Humidity
MIL-STD-202G, Method 103B, Test
Condition A high RH (95%) and
elevated temperature (40O C) for 240
hours.
Packaging
Available in Bulk (M=1000 pcs/pkg) or on
Tape/Reel (MRET1=1000 pcs/reel)
Salt Spray
MIL-STD-202G, Method 101D, Test
Condition B
Dimensions
Part Numbering System
0232 xxxx M X 125 P
20+0.5
0232 000P
5.2+0.1
-0.2
5.1+0.6
Series
Amp Code
5.1+0.6
Refer to Amp Code column of
Electrical Characteristics Table
Quantity Code
40
22.5 MAX
M = 1000
5.8 MAX
Packaging Code
0232 000 XEP
X = Filler
0.65*
Under Option Code
125 = To order 125Vac rated fuse
Blank = 250Vac rated fuse
All dimensions in mm
Notes:
* Ratings above 6.3A
have 0.8 mm dia lead
Packaging
Packaging Option
232 Series
Bulk
Bulk
Reel and Tape
Packaging Specification
Quantity
Quantity &
Packaging Code
Taping Width
N/A
N/A
EIA 296-E
1000
1000
1000
MX
MXE
MRET1
N/A
N/A
T1=52mm (2.062”)
232 Series
Lead-free
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/232.html for current information.
291
232 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
292
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Axial Lead & Cartridge Fuses
5×20 mm > Fast-Acting > 235 Series
235 Series,
PS
E
5 x 20 mm, Fast-Acting Fuse
Description
5x20mm fast-acting glass body cartridge fuse designed to
UL specification.
Features
t %FTJHOFEUP6-$4"
ANCE 248 Standard
t 3P)4DPNQMJBOUBOE
lead-free
t "WBJMBCMFJODBSUSJEHF
and axial lead format
Applications
Agency Approvals
PS
E
Agency File Number
Cartridge Certificates:
NBK290502-E10480 G
NBK290502-E10480 I
Leaded Certificates:
NBK290502-E10480 H
NBK290502-E10480 J
Certificates:
SU05001 – 3007
SU05001 – 2002
SU05001 – 2003
Listed File:
E10480
Guide No:
JDYX
File No:
029862
Certificate Class No:
LR1422-01
Used as supplementary protection in appliance or
utilization equipment to provide individual protection for
components or internal circuits.
Ampere Range
1A – 5A
6A & 7A
Electrical Characteristics for Series
1A – 5A
6A & 7A
% of Ampere
Rating
100mA – 400mA
500mA – 3A
4A – 6A
Ampere Rating
100%
135%
200%
100mA - 7A
Opening Time
4 hours, Minimum
100mA – 7A
1 hour, Maximum
5 seconds, Maximum
100mA – 3A
4A – 6A
235 Series
Agency
100mA – 7A
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/235.html for current information.
293
Revised: Jan 12, 2009
235 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
5×20 mm > Fast-Acting
> 235 Series
Electrical Characteristic Specifications by Item
Amp Rating
Amp Code
(A)
Voltage
Rating
(V)
Interrupting
Rating
Nominal Cold
Resistance
(Ohms)
Nominal
Melting
I2t
(A2 sec)
Agency Approvals
PS
E
.100
0.1
250
8.4000
0.00312
x
x
x
x
.125
0.125
250
5.7500
0.00273
x
x
x
x
.200
0.2
250
3.1500
0.00867
x
x
x
x
.250
0.25
250
2.2500
0.01660
x
x
x
x
.300
0.3
250
1.6000
0.03215
x
x
x
x
.400
0.4
250
1.750
0.05845
x
x
x
x
.500
0.5
250
0.4265
0.06915
x
x
x
x
.600
0.6
250
0.3195
0.11200
x
x
x
x
.700
0.7
250
0.2625
0.15600
x
x
x
x
.800
0.8
250
0.1920
0.25300
x
x
x
x
[email protected],
[email protected]
001.
1
250
0.1530
0.46750
x
x
x
x
x
1.25
1.25
250
0.1055
1.08500
x
x
x
x
x
0.0758
2.02500
x
x
x
x
x
0.0603
2.64500
x
x
x
x
x
01.6
1.6
250
002.
2
250
[email protected],
[email protected]
02.5
2.5
250
0.0437
5.44500
x
x
x
x
x
003.
3
250
0.0347
8.39500
x
x
x
x
x
03.5
3.5
250
0.0331
17.14000
x
x
004.
4
125
0.0246
17.14000
x
x
x
x
x
005.
5
125
0.0184
27.41000
x
x
x
x
x
006.
6
125
0.0148
47.32500
x
x
x
x
x
007.
7
125
0.0157
64.81500
x
x
[email protected]
Temperature Rerating Curve
x
x
0.200A
0.250A
0.300A
0.400A
0.500A
0.600A
0.700A
0.800A
1A
1.25A
1.6A
2A
2.5A
3A
4A
5A
6A
0.100A
0.125A
Average Time Current Curves
10000
TIME IN SECONDS
1000
100
10
1
0.1
0.01
0.1
1
10
100
1000
CURRENT IN AMPERES
Please contact Littelfuse for details on T-C curve for 7A rating
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
235 Series
294
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/235.html for current information.
Axial Lead & Cartridge Fuses
5×20 mm > Fast-Acting > 235 Series
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
Lead-Free Recommendation
200
Preheat:
180
(Depends on Flux Activation Temperature)
160
140
120
100
80
60
40
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Recommended Hand-Solder Parameters:
Time (Seconds)
Cooling Time
Preheat Time
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Materials
Body: Glass
Cap: Nickel–plated brass
Leads: Tin–plated Copper
Operating Temperature
–55ºC to +125ºC
Terminal Strength
MIL-STD-202G, Method 211A.
Test Condition A
Thermal Shock
MIL-STD-202G, Method 107G, Test
Condition B: (5 cycles –65OC +
125OC)
Solderability
Reference IEC 60127 Second Edition
2003-01 Annex A
Vibration
MIL-STD-202G, Method 201A
Humidity
Product Marking
Cap 1: Brand logo, current and voltage
rating
Cap 2: Series and agency approval
markings
MIL-STD-202G, Method 103B, Test
Condition A high RH (95%) and
elevated temperature (40O C) for 240
hours
Available in Bulk (M=1000 pcs/pkg) or on
Tape/Reel (MRET1=1000 pcs/reel)
Salt Spray
Packaging
MIL-STD-202G, Method 101D, Test
Condition B
235 Series
Product Characteristics
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/235.html for current information.
295
235 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
5×20 mm > Fast-Acting
> 235 Series
Dimensions
Part Numbering System
0235 xxxx M X E P
20+0.5
5.2+0.1
-0.2
0235000P
5.1+0.6
Series
Amp Code
5.1+0.6
Refer to Amp Code column of
Electrical Characteristics Table
0235.100 XEP
to
0235.400 XEP
40
22.5 MAX
Quantity Code
6.0 MAX
M = 1000
Packaging Code
0.65
X = Filler
Option Code
E = Axial Leaded
0235.500 XEP
to
0235006.XEP
40
22.5 MAX
Lead-free
5.8 MAX
0.65*
All dimensions in mm
Notes:
* Ratings above 6.3A
ø0.8 mm dia lead
Packaging
Packaging Option
235 Series
Bulk
Bulk
Reel and Tape
Packaging Specification
Quantity
Quantity &
Packaging Code
Taping Width
N/A
N/A
EIA 296-E
1000
1000
1000
MX
MXB
MRET1
N/A
N/A
T1=52mm (2.062”)
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
235 Series
296
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/235.html for current information.
Axial Lead & Cartridge Fuses
5×20 mm > Medium-Acting > 233 Series
233 Series,
PS
E
5 x 20 mm, Medium-Acting Fuse
Description
5x20mm medium–acting glass body fuse designed to UL
specification.
Features
t %FTJOHFEUP6-$4"
ANCE 248 Standard
t 3P)4DPNQMJBOUBOE
lead-free
t "WBJMBCMFJODBSUSJEHF
and axial lead format
Applications
Agency Approvals
PS
E
Agency File Number
Ampere Range
Cartridge Certificates:
NBK280602-E10480 C
NBK290502-E10480 I
1A – 5A
6A – 10A
Used as supplementary protection in appliance or
utilization equipment to provide individual protection for
components or internal circuits.
Electrical Characteristics for Series
Leaded Certificates:
NBK280602-E10480 D
NBK290502-E10480 J
1A – 5A
6A – 10A
Certificates:
SU05001 – 2010
% of Ampere
Rating
1A – 6.5A
100%
Listed File:
E10480
Guide:
JDYX
135%
1A – 10A
Fle:
029862
Acc. Class:
LR1422-01
200%
Ampere
Rating
Opening Time
1A – 3.5A
4 hours, Minimum
4A – 7A
1 hour, Minimum
8A – 10A
1 hour, Minimum
1A – 3.5A
15 sec., Min; 1500 sec., Max.
4A – 7A
15 sec., Min; 1500 sec., Max.
8A – 10A
3 sec., Min; 3600 sec., Max.
1A – 3.5A
.60 sec., Min; 3 sec., Max.
4A – 7A
.60 sec., Min; 3 sec., Max.
8A – 10A
0.4 sec., Min; 2.25 sec., Max.
Electrical Characteristic Specifications by Item
Amp Code
Amp
Rating
(A)
Voltage
Rating
(V)
001.
1.25
01.6
002.
02.5
003.
3.15
03.5
004.
005.
006.
06.3
007.
008.
010.
1
1.25
1.6
2
2.5
3
3.15
3.5
4
5
6
6.3
7
8
10
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
Interrupting
Rating
Nominal Cold
Resistance
(Ohms)
Nominal Melting
I2t
(A2 sec)
10,000A @ 125 VAC
0.1750
0.1263
0.0880
0.0684
0.0521
0.0431
0.0380
0.0322
0.0293
0.0217
0.0179
0.0166
0.0137
0.0084
0.0066
1.97500
3.39000
6.14000
9.97000
17.04500
26.24000
29.79500
36.27500
51.61000
89.97500
131.45500
151.90500
157.31000
169.43500
274.11500
233 Series
Agency
Agency Approvals
PS
E
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/233.html for current information.
297
Revised: Jan 12, 2009
233 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
5×20 mm > Medium-Acting
> 233 Series
Average Time Current Curves
1A
1.25A
1.6A
2A
2.5A
3A
3.15A
3.5A
4A
5A
6A
6.3A
7A
8A
10A
Temperature Rerating Curve
10000
1000
TIME IN SECONDS
100
0.1
0.01
0.001
1
10
100
1000
CURRENT IN AMPERES
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
Wave Parameter
260
Lead-Free Recommendation
240
220
Preheat:
200
(Depends on Flux Activation Temperature)
180
160
140
120
100
80
60
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
40
Recommended Hand-Solder Parameters:
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Time (Seconds)
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Cooling Time
Preheat Time
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
233 Series
298
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/233.html for current information.
Axial Lead & Cartridge Fuses
5×20 mm > Medium-Acting > 233 Series
Product Characteristics
Materials
Body: Glass
Cap: Nickel–plated brass
Leads: Tin–plated Copper
Operating Temperature
–55ºC to +125ºC
Terminal Strength
MIL-STD-202G, Method 211A, Test
Condition A
Thermal Shock
MIL-STD-202G, Method 107G, Test
Condition B: (5 cycles –65ºC to
+125ºC)
Solderability
Reference IEC 60127 Second Edition
2003-01 Annex A
Vibration
MIL-STD-202G, Method 201A
Humidity
Product Marking
Cap 1: Brand logo, current and voltage
rating
Cap 2: Series and agency approval
markings
MIL-STD-202G, Method 103B, Test
Condition A. high RH (95%) and
elevated temp (40ºC) for 240 hours
Salt Spray
MIL-STD-202G, Method 101D, Test
Condition B
Available in Bulk (M=1000 pcs/pkg) or on
Tape/Reel (MRET1=1000 pcs/reel)
Packaging
Dimensions
Part Numbering System
0233 xxxx M X P
0233 000P
20+0.5
Series
5.2+0.1
-0.2
5.1+0.6
Amp Code
Refer to Amp Code column of
Electrical Characteristics Table
5.1+0.6
Quantity Code
0233000XEP
22.5 MAX
40
M = 1000
5.8 MAX
Packaging Code
X = Filler
Lead-free
.65*
Packaging
Packaging Option
233 Series
Bulk
Bulk
Reel and Tape
Packaging Specification
Quantity
Quantity &
Packaging Code
Taping Width
N/A
N/A
EIA 296-E
1000
1000
1000
MX
MXE
MRET1
N/A
N/A
T1=52mm (2.062”)
233 Series
All dimensions in mm
Notes:
* Ratings above 6.3A
have 0.8 mm dia lead
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/233.html for current information.
299
233 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
300
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Axial Lead & Cartridge Fuses
5×20 mm > Medium-Acting > 234 Series
234 Series,
5 x 20 mm, Medium-Acting Fuse
PS
E
Description
5x20mm medium-acting glass/ceramic body cartridge fuse
designed to UL specification.
Features
t %FTJOHFEUP6-$4"
ANCE 248 Standard
t (MBTTCPEZGPS"
Ceramic body for
4-10A
t "WBJMBCMFJODBSUSJEHF
and axial lead format
Agency Approvals
Agency
PS
E
t 3P)4DPNQMJBOUBOE
lead-free
Applications
Agency File Number
Cartridge Certificates:
NBK290502-E10480 C
NBK280602-E10480 E
NBK280602-E10480 G
Leaded Certificates:
NBK290502-E10480 H
NBK280602-E10480 F
NBK280602-E10480 H
Certificates:
SU05001 – 3001
SU05001 – 4001
SU05001 – 2016
Ampere Range
Used as supplementary protection in appliance or
utilization equipment to provide individual protection for
components or internal circuits.
1A – 3.5A
4A & 5A
6A – 10A
Electrical Characteristics for Series
1A – 3.5A
4A & 5A
6A – 10A
% of Ampere
Rating
1A – 3.15A
3.5A
4A – 10A
100%
Listed File:
E10480
Guide:
JDYX
135%
200%
File:
029862
Certificate Class:
LR1422-01
Ampere
Rating
Opening Time
1 – 3.5
4 hours, Minimum
4 – 10
1 hour, Minimum
1 – 3.5
4 – 10
1 – 3.5
4 – 10
3 sec., Min; 1 hr. Max
3 sec., Min; 1 hr. Max
400ms., Min; 2.25 sec. Max
400ms., Min; 4 sec. Max
234 Series
1A – 10A
Electrical Characteristic Specification by Item
Amp Code
Ampere
Rating
(A)
Voltage
Rating
(V)
001.
1.25
01.6
002.
02.5
003.
3.15
03.5
004.
005.
006.
06.3
008.
010.
1
1.25
1.6
2
2.5
3
3.15
3.5
4
5
6
6.3
8
10
250
250
250
250
250
250
250
250
250
250
250
250
250
250
Interrupting
Rating
Nominal Cold
Resistance
(Ohms)
Nominal
Melting
I2t (A2 sec)
0.1750
0.1262
0.0884
0.0684
0.0521
0.0431
0.0380
0.0322
0.0304
0.0214
0.0194
0.0168
0.0144
0.0107
1.97500
3.39000
6.14000
9.97000
17.04500
26.2400
29.79500
36.27500
10.37000
20.64500
33.01500
37.68500
80.67500
129.02500
100A @ 250 VAC
10000A @ 125 VAC
200A @ 250 VAC
10000A @ 125 VAC
Agency Approvals
PS
E
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/234.html for current information.
301
Revised: Jan 12, 2009
234 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
5×20 mm > Medium-Acting
> 234 Series
10A
1.25A
1.6A
2A
2.5A
3A
3.15A
3.5A
4A
5A
6A
6.3A
8A
Average Time Current Curves
1A
Temperature Rerating Curve
10000
1000
TIME IN SECONDS
100
10
1
0.1
0.01
0.001
1
10
100
1000
CURRENT IN AMPERES
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
200
Preheat:
180
(Depends on Flux Activation Temperature)
160
140
120
100
80
60
40
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Recommended Hand-Solder Parameters:
Time (Seconds)
Cooling Time
Preheat Time
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
234 Series
302
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/234.html for current information.
Axial Lead & Cartridge Fuses
5×20 mm > Medium-Acting > 234 Series
Product Characteristics
Terminal Strength
MIL-STD-202G, Method 211A, Test
Condition A
Solderability
Reference IEC 60127 Second Edition
2003-01 Annex A
Product Marking
Cap 1: Brand logo, current and voltage
rating
Cap 2: Series and agency approval
markings
Packaging
Available in Bulk (V=5, H=100, M=1000
pcs/pkg) or on Tape/Reel (MRET1=1000
pcs/reel)
Dimensions
Operating Temperature
–55ºC to +125ºC
Thermal Shock
MIL-STD-202G, Method 107G, Test
Condition B: (5 cycles –65ºC to
+125ºC)
Vibration
MIL-STD-202F Method 201A
Humidity
MIL-STD-202G, Method 103B, Test
Condition A. high RH (95%) and
elevated temp (40ºC) for 240 hours
Salt Spray
MIL-STD-202G, Method 101D, Test
Condition B
Part Numbering System
0234 xxxx M X P
20+0.5
5.2+0.1
-0.2
0234 000P
5.1+0.6
0234 000XEP
40
Series
5.1+0.6
22.5 MAX
Amp Code
Refer to Amp Code column of
Electrical Characteristics Table
5.8 MAX
Quantity Code
M = 1000
0.65*
Packaging Code
All dimensions in mm
X = Filler
Notes:
* Ratings above 6.3A
have 0.8 mm dia lead
Lead-free
Packaging
Packaging Option
234 Series
Bulk
Bulk
Reel and Tape
Packaging Specification
Quantity
Quantity &
Packaging Code
Taping Width
N/A
N/A
EIA 296-E
1000
1000
1000
MX
MXE
MRET1
N/A
N/A
T1=52mm (2.062”)
234 Series
Materials
Body: Glass(1A-3.5A), Ceramic(4A-10A)
Cap: Nickel–plated brass
Leads: Tin–plated Copper
Filter: Sand (4A – 10A)
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/234.html for current information.
303
234 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
304
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Axial Lead & Cartridge Fuses
5×20 mm > Time Lag > 239 Series
239 Series,
®
5 x 20 mm, Slo-Blo
PS
E
Fuse
Description
5x20mm time-Lag glass body cartridge fuse designed to
UL specification.
Features
t %FTJOHFEUP6-$4"
ANCE 248 Standard
t 3P)4DPNQMJBOUBOE
lead-free
t "WBJMBCMFJODBSUSJEHF
and axial lead format
Agency Approvals
PS
E
Agency File Number
Cartridge Certificates:
NBK290502-E10480 G
NBK280602-E10480 C
NBK290502-E10480 I
Leaded Certificates:
NBK290502-E10480 H
NBK280602-E10480 D
NBK290502-E10480 J
Certificates:
SU05001 – 2004A
SU05001 – 2014A
Listed File:
E10480
Guide:
JDYX
File:
029862
Certificates Class:
LR1422-01
Applications
Ampere Range
Used as supplementary protection in appliance or
utilization equipment to provide individual protection for
components or internal circuits.
1A – 3.5A
4A & 5A
7A
Electrical Characteristics for Series
1A – 3.15A
4A & 5A
7A
% of Ampere
Rating
200mA – 3.15A
4A – 7A
Ampere
Ratings
100%
135%
80mA – 7A
200%
Opening Time
4 hours, Minimum
All Ratings
1 hour, Maximum
5 seconds., Min; 2 min., Max
200mA – 3.15A
4A – 7A
239 Series
Agency
80mA – 7A
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/239.html for current information.
305
Revised: Jan 12, 2009
239 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
5×20 mm > Time Lag
> 239 Series
Electrical Characteristic Specification by Item
Amp Rating
Amp Code
(A)
.080
.100
.125
.150
.200
.250
.300
.400
.500
.600
.700
.750
.800
001.
1.25
01.6
002.
02.5
003.
3.15
03.2
03.5
004.
005.
007.
0.08
0.1
0.125
0.15
0.2
0.25
0.3
0.4
0.5
0.6
0.7
0.75
0.8
1
1.25
1.6
2
2.5
3
3.15
3.2
3.5
4
5
7
Voltage
Rating
(V)
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
125
125
125
Interrupting
Rating
Nominal Cold
Resistance
(Ohms)
Nominal
Melting
I2t (A2 sec)
28.1750
17.3425
11.6000
8.1000
3.8725
3.0700
2.3000
1.4750
0.9090
0.6990
0.5375
0.4710
0.4155
0.2965
0.1980
0.1205
0.0943
0.0583
0.04877
0.0414
0.0385
0.0370
0.0312
0.0199
0.0114
0.02500
0.05500
0.08500
0.13000
0.16500
0.34000
0.61500
1.49000
1.98500
2.41500
4.12000
5.42500
7.56500
11.29500
19.52500
30.43000
50.58500
79.70500
129.51000
128.05000
128.05000
128.05000
270.703
302.836
305.758
35A @ 125 VAC
35A @ 125 VAC
10000A @ 125 VAC
10000A @ 125 VAC
100A @ 250 VAC
10000A @ 125 VAC
Agency Approvals
PS
E
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
239 Series
306
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/239.html for current information.
Axial Lead & Cartridge Fuses
5×20 mm > Time Lag > 239 Series
Average Time Current Curves
0.200A
0.250A
0.300A
0.400A
0.500A
0.600A
0.700A
0.750A
0.800A
1A
1.25A
1.6A
2A
2.5A
3A
3.15A
4A
5A
7A
Temperature Rerating Curve
10000
1000
TIME IN SECONDS
100
10
1
0.1
0.01
0.001
0.01
1
10
100
1000
CURRENT IN AMPERES
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
Wave Parameter
240
220
200
Preheat:
180
(Depends on Flux Activation Temperature)
160
140
120
100
80
60
40
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
239 Series
260
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Recommended Hand-Solder Parameters:
Time (Seconds)
Cooling Time
Preheat Time
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/239.html for current information.
307
239 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
5×20 mm > Time Lag
> 239 Series
Product Characteristics
Materials
Body: Glass
Cap: Nickel–plated brass
Leads: Tin–plated Copper
Operating Temperature
–55ºC to +125ºC
Terminal Strength
MIL-STD-202G, Method 211A, Test
Condition A
Thermal Shock
MIL-STD-202G, Method 107G, Test
Condition B: (5 cycles –65ºC to
+125ºC)
Solderability
Reference IEC 60127 Second Edition
2003-01 Annex A
Vibration
MIL-STD-202G, Method 201A
Product Marking
MIL-STD-202G, Method 103B, Test
Condition A. high RH (95%) and
elevated temp (40ºC) for 240 hours
MIL-STD-202G, Method 101D, Test
Condition B
Humidity
Cap 1: Brand logo, current and voltage
rating
Cap 2: Series and agency approval
markings
Salt Spray
Dimensions
Part Numbering System
0239 xxxx M X P
20+0.5
5.2+0.1
-0.2
0239 000P
5.1+0.6
0239 000XEP
40
Series
5.1+0.6
22.5 MAX
Amp Code
Refer to Amp Code column of
Electrical Characteristics Table
5.8 MAX
Quantity Code
M = 1000
0.65*
Packaging Code
All dimensions in mm
X = Filler
Notes:
* Ratings above 6.3A
have 0.8 mm dia lead
Lead-free
Packaging
Packaging Option
239 Series
Bulk
Bulk
Reel and Tape
Packaging Specification
Quantity
Quantity &
Packaging Code
Taping Width
N/A
N/A
EIA 296-E
1000
1000
1000
MXE
MXB
MRET1
N/A
N/A
T1=52mm (2.062)
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
239 Series
308
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/239.html for current information.
Axial Lead & Cartridge Fuses
5×20 mm > Time-Lag > 477 Series
5 x 20 mm, Time-Lag (Slo-Blo®) Fuse
PS
E
477 Series
477 Series,
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/477.html for current information.
309
Revised: Apr 7, 2009
477 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
5×20 mm > Time-Lag
> 477 Series
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
477 Series
310
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/477.html for current information.
Axial Lead & Cartridge Fuses
477 Series
5×20 mm > Time-Lag > 477 Series
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/477.html for current information.
311
477 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
312
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Axial Lead & Cartridge Fuses
"('BTU"DUJOH4FSJFT
312/318 Series
PS
E
Lead-Free 3AG, Fast-Acting Fuse
Description
The 3AG Fast-Acting Fuse solves a broad range
of application requirements while offering reliable
performance and cost-effective circuit protection.
Features
t *OBDDPSEBODFXJUI6-
Standard 248-14
t "WBJMBCMFJODBSUSJEHF
and axial lead format
and with various
forming dimensions
t 3P)4DPNQMJBOUBOE
Lead-free (except
10mA and 31mA rated
items)
Agency Approvals
Ampere Range
E10480
312 Series: 10mA - 10A/
318 Series: 31mA - 10A
312 Series: 12A - 30A
AU1410
PS
E
Applications
Agency File Number
LR 29862
312 Series: 10mA - 30A
318 Series: 31mA - 10A
NBK040205E10480B/F
312/318 Series: 1A - 10A
E10480
318 Series: 12A - 30A
SU050015005/5006/6005/6008
312/318 Series:
1A/ 1.25A / 1.6A/
2A - 10A
Used as supplementary protection in appliance or
utilization equipment to provide individual protection for
components or internal circuits.
Electrical Characteristics for Series
% of Ampere
Rating
Ampere Rating
Opening Time
100%
10mA – 35A
4 hours, Minimum
135%
10mA – 35A
1 hour, Maximum
200%
312 Series: 10mA - 10A
318 Series: 31mA - 10A
10mA – 10A
5 sec., Maximum
12A – 30A
10 sec., Maximum
35A
20 sec., Maximum
312/318 Series
Agency
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/312.html
or /318.html for current information.
313
Revised: Jan 12, 2009
312/318 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
"('BTU"DUJOH4FSJFT
Electrical Characteristic Specifications by Item
Agency Approvals
Nominal
Cold
Resistance
(Ohms)
Nominal
Melting
I2t (A2 sec)
250
177.4000
NA
x
x
x**
250
23.6500
0.0000300
x
x
x
Amp
Code
Ampere
Rating (A)
Voltage
Rating
(V)
.10*
0.01
.031*
0.031
Interrupting
Rating
PS
E
.062
0.062
250
24.7000
0.000249
x
x
x
.100
0.1
250
11.2800
0.00102
x
x
x
.125
0.125
250
7.1450
0.00289
x
x
x
.150
0.15
250
5.1300
0.00550
x
x
x
.175
0.175
250
3.8750
0.00960
x
x
x
.187
0.187
250
3.4200
0.0128
x
x
x
.200
0.2
250
.250
0.25
250
[email protected]
[email protected]
3.0200
0.0165
x
x
x
2.0100
0.0355
x
x
x
.300
0.3
250
1.4050
0.0689
x
x
x
.375
0.375
250
0.8250
0.185
x
x
x
.500
0.5
250
0.4980
0.483
x
x
x
.600
.6
250
0.3620
0.880
x
x
x
.750
0.75
250
0.2445
1.84
x
x
x
001.
1
250
0.1900
0.760
x
x
x
x
x
1.25
1.25
250
0.1385
1.45
x
x
x
x
x
x
x
x
x
x
x
x
01.5
1.5
250
0.1036
2.35
x
01.6
1.6
250
0.0934
2.80
x
1.75
1.75
250
01.8
1.8
250
0.0856
3.60
x
x
x
x
0.0825
3.85
x
x
x
x
002.
2
250
0.0704
5.20
x
x
x
x
2.25
02.5
2.25
250
0.0594
7.20
x
x
x
x
x
2.5
250
0.0513
9.54
x
x
x
x
x
[email protected]
[email protected]
x
003.
3
250
0.0427
14.0
x
x
x
x
x
004.
4
250
0.0293
28.5
x
x
x
x
x
005.
5
250
0.0224
50.0
x
x
x
x
x
006.
6
250
0.0178
118.0
x
x
x
x
x
007.
7
250
0.0146
118.0
x
x
x
x
x
008.
8
250
0.0122
166.0
x
x
x
x
x
010.
x
x
x
x
[email protected]
[email protected]
10
250
0.0093
298.0
x
*
12
32
0.0072
234.6
015.*
15
32
0.0052
490.5
*
020.
20
32
0.0035
025.*
25
32
0.0024
030.
30
32
0.0019
3717
035.
35
32
0.0013
7531
012.
*
[email protected] Vac
x
**
x
x
x
x**
x
1029
x
x
**
x
2041
x
x**
x
x
x
x
**
NOTES:
* 10mA and 31mA are not RoHS compolaint as the glass bead contains Pb.
** For 318 Series 12A to 30A, the agency approval is only cURus.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
312/318 Series
314
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/312.html
or /318.html for current information.
Axial Lead & Cartridge Fuses
"('BTU"DUJOH4FSJFT
.250 A
.375 A
.500 A
.750 A
1A
1.5 A
2A
2.5 A
3A
4A
5A
6A
7A
8A
10 A
.125 A
1000
.062 A
Average Time Current Curves
.031 A
Temperature Rerating Curve
TIME IN SECONDS
100
10
1
0.1
0.01
0.005 0.01
1
0.1
CURRENT IN AMPERES
10
100
Please contact Littelfuse for more details on those T-C Curves of other ampere
ratings which are not published.
Recommended Process Parameters:
280
260
Wave Parameter
240
220
200
Preheat:
180
(Depends on Flux Activation Temperature)
160
140
120
100
80
60
40
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
312/318 Series
Soldering Parameters - Wave Soldering
Recommended Hand-Solder Parameters:
Time (Seconds)
Cooling Time
Preheat Time
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/312.html
or /318.html for current information.
315
312/318 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
"('BTU"DUJOH4FSJFT
Product Characteristics
Materials
Body: Glass
Cap: Nickel–plated brass
Leads: Tin–plated Copper
Terminal Strength
MIL-STD-202G, Method 211A,
Test Condition A
Solderability
Reference IEC 60127 Second Edition
2003-01 Annex A
Cap1:
Product Marking
Brand logo, current and voltage
ratings
Series and agency approval
marks
Cap2:
Dimensions
Operating
Temperature
–55ºC to +125ºC
Thermal
Shock
MIL-STD-202G, Method 107G, Test Condition B:
(5 cycles -65°C to +125°C)
Vibration
MIL-STD-202G, Method 201 A
Humidity
MIL-STD-202G, Method 103B,
Test Condition A: High RH (95%),
and Elevated temperature (40°C) for 240 hours
Salt Spray
MIL-STD-202G, Method 101D,
Test Condition B
Part Numbering System
Measurements displayed in millimeters (inches)
0312 xxxx M X P
312 Series
Series
6.35
(.25")
Amp Code
Refer to Amp Code column of
Electrical Characteristics Table
31.75
(1.25")
Quantity Code
M = 1000
318 Series
Packaging Code
0.813
(.032")
X = Filler
6.985
(.275")
Lead-free
32.72
(1.288")
Axial Lead Material:
Tin Coated Copper
39.68
(1.56") TYP.
Standard Length
12.70
(0.50”) TYP
Short Lead Option
Packaging
Packaging Option
Quantity
Quantity &
Packaging Code
312 Series (Cartridge Type)
Bulk
5
VX
Bulk
100
HX
Bulk
1000
MX
Bulk
1000
MXCC
Bulk
100
HXCC
318 Series (Axial Leaded)
Bulk
5
VX
Bulk
100
HX
Bulk
1000
MX
Bulk
1000
MXSL
Bulk
1000
MXB
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
312/318 Series
316
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/312.html
or /318.html for current information.
Axial Lead & Cartridge Fuses
"(5JNF-BH4FSJFT
313/315 Series
®
Lead-Free 3AG, Slo-Blo
PS
E
Fuse
Description
The 3AG Slo-Blo® fuse solves a broad range of application
requirements while offering reliable performance and costeffective circuit protection.
The fuse catalog number with the suffix “ID” instantly
identifies itself upon opening by showing a discoloration
of its glass body. Guesswork and time consuming circuit
testing are eliminated. This unique design offers the same
quality performance characteristics as the standard 3AG
Slo-Blo® Fuse design.
Features
Agency Approvals
Agency
PS
E
t *OBDDPSEBODFXJUI6-
Standard 248-14
Agency File Number
Ampere Range
E10480
10mA - 10A**
LR 29862
10mA - 10A**/15A**
E10480
10A - 30A
NBK 040205E10480B/D/F/G/H
1A - 10A**/ 15A**
SU050015007/5008/5009/6004
2.25A - 8A
t 3P)4DPNQMJBOUBOE
Lead-free
t "WBJMBCMFJODBSUSJEHF
and axial lead format
and with various
forming dimensions
Applications
Used as supplementary protection in appliance or
utilization equipment to provide individual protection for
components or internal circuits.
10mA - 10A**/15A**
% of Ampere
Rating
Ampere Rating
Opening Time
100%
10mA – 30A
4 hours, Minimum
135%
10mA – 30A
1 hour, Maximum
10mA – 15A
5 sec., Min.,
30 sec., Max
20A – 30A
5 sec., Min.,
60 sec Max
200%
313/315 Series
Electrical Characteristics by Series
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/313.html
or /315.html for current information.
317
Revised: Jan 12, 2009
313/315 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
"(5JNF-BH4FSJFT
Electrical Characteristic Specifications by Item
Agency Approvals
Nominal
Nominal
Cold
Melting
Resistance 2
I t (A2 sec)
(Ohms)
Ampere
Rating
(A)
Voltage
Rating
(V)
.010
0.01
250
4300.0000
0.000121
x
x
x
.031
0.031
250
430.0000
0.00303
x
x
x
x
Amp
Code
Interrupting
Rating
PS
E
.040
0.04
250
300.0000
0.00630
x
x
.062
0.062
250
120.0000
0.0210
x
x
x
.100
0.1
250
43.0000
0.0850
x
x
x
.125
0.125
250
30.0000
0.152
x
x
x
.150
0.15
250
20.0000
0.270
x
x
x
.175
0.175
250
8.6700
0.177
x
x
x
.187
0.187
250
8.0100
0.230
x
x
x
.200
0.2
250
.250
0.25
250
[email protected]
[email protected]
6.5900
0.270
x
x
x
4.2700
0.385
x
x
x
.300
0.3
250
3.1350
0.730
x
x
x
.375
0.375
250
2.0950
1.23
x
x
x
.400
0.4
250
1.8750
1.35
x
x
x
.500*
0.5
250
1.2600
2.55
x
x
x
.600
0.6
250
0.9120
4.00
x
x
x
.700
0.7
250
0.7000
5.90
x
x
x
.750
0.75
250
0.6215
7.16
x
x
x
.800
0.8
250
0.5540
8.00
x
x
x
001.*
1
250
0.3750
14.0
x
x
x
x
01.2
1.2
250
0.2780
21.5
x
x
x
x
1.25
1.25
250
0.2600
24.0
x
x
x
x
01.5*
1.5
250
0.1910
38.0
x
x
x
x
01.6
1.6
250
0.1710
49.6
x
x
x
x
01.8
1.8
250
0.1410
58.0
x
x
x
x
002.*
2
250
0.1169
77.0
x
x
x
x
2.25
2.25
250
0.0968
121
x
x
x
x
[email protected]
[email protected]
x
02.5
2.5
250
0.0811
130
x
x
x
x
x
02.8
2.8
250
0.0675
170
x
x
x
x
x
003.*
3
250
0.0593
200
x
x
x
x
x
03.2
3.2
250
0.0529
209
x
x
x
x
x
004.*
4
250
0.0311
76.1
x
x
x
x
x
005.*
5
250
0.0214
140
x
x
x
x
x
6.25*
6.25
250
06.3
6.3
250
[email protected]
[email protected]
0.0154
242
x
x
x
x
x
0.0154
242
x
x
x
x
x
007.*
7
250
0.0128
347
x
x
x
x
x
008.*
8
250
0.0111
445
x
x
x
x
x
010.* +
10
250
0.0083
760
x
x
x
x
010.*
10
32
0.0083
760
x
x
x
012.
12
32
0.0065
1200
015.**
15
125
0.0050
1870
015.
15
32
0.0050
1870
x
[email protected]
x
x
x
020.
20
32
0.0022
9560
x
025.
25
32
0.0017
16500
x
030.
30
32
0.0012
26900
x
* For 313series, these ratings available with an indicating option. Add the “ID” designation to the series number. i.e. 313.500ID.
** These 2 ratings are designed for special voltage requirement. For 10A, it is available as 250Vac rated and the part number is 0313010.
MX250P; for 15A, it is available as 125Vac rated and the part number is 0315015.MX125P.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
313/315 Series
318
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/313.html
or /315.html for current information.
Axial Lead & Cartridge Fuses
"(5JNF-BH4FSJFT
Average Time Current Curves
1/16A
1/10A
15/100
.175A
1/4A
3/8A
1/2A
3/4A
1A
1 1/2A
2A
3A
4A
5A
7A
8A
10A
12A
15A
20A
25A
30A
Temperature Rerating Curve
1000
A
B
100
B
TIME IN SECONDS
A
10
1
A - For 313/315 Series, from 10mA to 150mA
0.1
B - For all other ampere ratings of 313/315 series
0.01
0.05 0.1
1
10
CURRENT IN AMPERES
100
1000
Soldering Parameters - Wave Soldering
260
Wave Parameter
240
220
200
Preheat:
180
(Depends on Flux Activation Temperature)
160
140
120
100
80
60
40
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
313/315 Series
Recommended Process Parameters:
280
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Recommended Hand-Solder Parameters:
Time (Seconds)
Cooling Time
Preheat Time
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/313.html
or /315.html for current information.
319
313/315 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
"(5JNF-BH4FSJFT
Product Characteristics
Materials
Body: Glass
Cap: Nickel–plated brass
Leads: Tin–plated Copper
Operating
Temperature
–55ºC to +125ºC
Terminal Strength
MIL-STD-202G, Method 211A, Test
Condition A
Thermal Shock
MIL-STD-202G, Method 107G, Test
Condition B: (5 cycles -65°C to +125°C)
Reference IEC 60127 Second Edition
2003-01 Annex A
Vibration
MIL-STD-202G, Method 201 A
Solderability
Humidity
Product Marking
Cap1: Brand logo, current and voltage
ratings
Cap2: Series and agency approval marks
MIL-STD-202G, Method 103B, Test
Condition A: High RH (95%) and Elevated
temperature (40°C) for 240 hours
Salt Spray
MIL- STD-202G, Method 101D, Test
Condition B
Dimensions
Part Numbering System
313 000P Series
315 000P Series
0313 xxxx M X P
0.813 (.032") (1/100 - 15A)
1.016 (.040") (20 - 30A)
6.985 (.275")
Series
6.35 (.25")
Amp Code
31.75
(1.25")
32.385
(1.275")
Refer to Amp Code column of
Electrical Characteristics Table
38.1
(1.50") TYP.
Quantity Code
Axial Lead Material: Tin coated copper.
M = 1000
Packaging Code
X = Filler
Lead-free
Packaging
Packaging Specification
Quantity
Quantity &
Packaging Code
Reel Size
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
N/A
N/A
N/A
N/A
N/A
N/A
N/A
5
100
100
1000
1000
100
100
VX
HX
HXID
MX
MX250
HXCCD
VXID
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
5
100
1000
1000
1000
100
1000
1000
1000
1000
VX
HX
MX
MX125
MXB
HXB
MXBB
MXSL
MXB
MXSL
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Packaging Option
313 Series
315 Series
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
313/315 Series
320
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/313.html
or /315.html for current information.
Axial Lead & Cartridge Fuses
3AB > Fast Acting > 314/324 Series
314/324 Series
PS
E
Lead-free 3AB, Fast-acting Fuse
Description
The 3AB Fast-Acting Fuse with ceramic body construction
permits higher interrupting ratings and voltage ratings. Ideal
for applications where high current loads are expected.
Features
t *OBDDPSEBODFXJUI6-
Standard 248-14
t "WBJMBCMFJODBSUSJEHF
and axial lead format
and with various
forming dimensions
Agency Approvals
Agency
PS
E
t 3P)4DPNQMJBOUBOE
Lead-free
Applications
Agency File Number
Ampere Range
E10480
125mA - 15A
LR 29862
125mA - 20A
E10480
15A* - 40A
NBK 030805 - E10480A-F
NBK 260106 - JP1021A/B
125mA - 30A
SU05001 6001/6002/6003/7006
125mA - 30 A
% of Ampere
Rating
100%
135%
125mA - 30A
200%
Used as supplementary protection in appliance or
utilization equipment to provide individual protection for
components or internal circuits.
Electrical Characteristics for Series
Ampere Rating
Opening Time
125mA – 30A
125mA – 30A
125mA – 12A
15A – 30A
4 hours, Minimum
1 sec.., Maximum
15 sec., Maximum
30 sec., Maximum
Ampere
Rating
(A)
Voltage
Rating
(V)
.125
.250
.375
.500
.750
001.
002.
003.
004.
005.
006.
007.
008.
010.
012.
015.
015.*
0.125
0.25
0.375
0.5
0.75
1
2
3
4
5
6
7
8
10
12
15
15
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
280
020.
20
250
Amp
Code
020.*
20
280
025.
25
250
025.**
25
280
030.
30
250
040.
40
250
Interrupting
Rating
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
Nominal
Cold
Resistance
(Ohms)
6.20
1.95
0.820
0.500
0.250
0.189
0.0700
0.0432
0.0470
0.0300
0.0240
0.0187
0.0153
0.0105
0.00760
0.00505
0.00505
Agency Approvals
Nominal
Melting
2
I t (A2 sec)
0.00149
0.0140
0.050
0.115
0.466
0.690
11.0
14.6
10.4
26.0
45.0
71.0
105
206
570
292
292
0.00355
631
0.00355
631
0.00235
1450
0.00235
1450
[email protected]
[email protected]
[email protected]
[email protected]
0.00182
2490
[email protected]
[email protected]
0.0014
22925
PS
E
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
314/324 Series
Electrical Characteristic Specification by Item
x
x
x
x
x
* [email protected] interrupting rating available for 15A and 20A. ** [email protected] for 25A. Add suffix ’280’. Example: 0324020.MX280P.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/314.html
or /324.html for current information.
321
Revised: Jan 12, 2009
314/324 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
3AB > Fast Acting > Transientology
314/324 Series
2A
3A
4A
5A
6A
7A
8A
10A
12A
15A
20A
25A
30A
1/4A
3/8A
1/2A
3/4A
1A
Average Time Current Curves
1/8A
Temperature Rerating Curve
1000
TIME IN SECONDS
100
10
1
0.1
0.01
0.1
1
10
100
CURRENT IN AMPERES
1000
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
200
Preheat:
180
(Depends on Flux Activation Temperature)
160
140
120
100
80
60
40
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Recommended Hand-Solder Parameters:
Time (Seconds)
Cooling Time
Preheat Time
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
314/324 Series
322
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/314.html
or /324.html for current information.
Axial Lead & Cartridge Fuses
3AB > Fast Acting > 314/324 Series
Product Characteristics
Materials
Body: Ceramic
Cap: Nickel–plated brass
Leads: Tin–plated Copper
Operating
Temperature
–55ºC to +125ºC
Terminal Strength
MIL-STD-202G, Method 211A, Test
Condition A
Thermal Shock
MIL-STD-202G, Method 107G, Test
Condition B: (5 cycles -65°C to +125°C)
Reference IEC 60127 Second Edition
2003-01 Annex A
Vibration
MIL-STD-202G, Method 201 A
Solderability
Humidity
MIL-STD-202G, Method 103B, Test
Condition A: High RH (95%) and Elevated
temperature (40°C) for 240 hours
Salt Spray
MIL- STD-202G, Method 101D, Test
Condition B
Cap1:
Product Marking
Cap2:
Brand logo, current and voltage
ratings
Series and agency approval
marks
Dimensions
Part Numbering System
314 000P Series
324 000P Series
0314 xxxx M X P
0.813 (.032") (1/ 8 - 15A)
1.016 (.040") (20 - 30A)
6.985 (.275")
Series
Amp Code
6.35 (.25")
Refer to Amp Code column of
Electrical Characteristics Table
32.72
(1.288")
31.75
(1.25")
38.1
(1.50") TYP.
Axial Lead Material: Tin coated copper.
Quantity Code
M = 1000
Packaging Code
X = Filler
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
Reel Size
N/A
N/A
N/A
N/A
N/A
N/A
5
100
1000
1000
1000
1000
VX
HX
MX
MX52L
MXCC
MX52LE
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
5
100
1000
1000
1000
1000
VX
HX
MX
MX280
MX52
MXF24
N/A
N/A
N/A
N/A
N/A
N/A
314 Series
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
324 Series
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
314/324 Series
Lead-free
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/314.html
or /324.html for current information.
323
314/324 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
324
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Axial Lead & Cartridge Fuses
3AB > Very Fast-Acting > 322 Series
322/332 Series
PS
E
Lead-free 3AB, Very Fast-acting Fuse
Description
The 3AB Very Fast-Acting Fuse for protection of Silicon
Controlled Rectifiers and similar solid-state devices.
Features
t *OBDDPSEBODFXJUI6-
Standard 248-14
t 3P)4DPNQMJBOUBOE
Lead-free
t "WBJMBCMFJODBSUSJEHF
format only
Applications
Agency Approvals
Agency
Agency File Number
Ampere Range
E10480
12A - 30A
E10480
1A - 10A
Used as supplementary protection in appliance or
utilization equipment to provide individual protection for
components or internal circuits.
Electrical Characteristics for Series
NBK080306JP1021A/B
PS
E
% of Ampere
Rating
Ampere Rating
100%
1 – 30
4 hours, Minimum
1 – 10
.2 second, Maximum
12 – 30
1 sec.ond, Maximum.
1A - 10A
250%
1A - 30A
Opening Time
Electrical Characteristic Specifications by Item
Ampere
Rating
(A)
Voltage
Rating
(V)
001.
1
Agency Approvals
Nominal Cold
Resistance
(Ohms)
Nominal
Melting
2
I t (A2 sec)
PS
E
250
0.0927
0.100
x
Interrupting
Rating
x
x
1.25
1.25
250
0.0804
0.156
x
x
x
002.
2
250
0.0416
0.560
x
x
x
003.
3
250
0.0245
1.890
x
x
x
004.
4
250
005.
5
250
006.
6
250
007.
7
250
[email protected]
[email protected]
[email protected]
0.0179
3.360
x
x
x
0.0128
6.250
x
x
x
0.0117
8.208
x
x
x
0.0108
10.58
x
x
x
008.
8
250
0.0088
16.45
x
x
x
009.
9
250
0.0077
20.66
x
x
x
010.
10
250
0.0073
24.0
x
x
x
012.
12
65
0.0515
60.0
x
x
015.
15
65
0.0043
90.0
x
x
020.
20
65
0.0034
192.0
x
x
025.*
25
65
0.0029
325.0
x
x
030.*
30
65
0.0023
540.0
x
x
[email protected]
[email protected]
322 Series
Amp Code
* Ratings from 1A to 10A are available for 332 series
* Ratings from 12A to 30A are available for 322 series, these ratings are RoHS compliant version.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/322.html for current information.
325
Revised: Jan 12, 2009
322 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
3AB > Very Fast-Acting
> 322 Series
2A
3A
4A
5A
6A
7A
8A
10A
12A
15A
20A
25A
30A
1/4A
3/8A
1/2A
3/4A
1A
Average Time Current Curves
1/8A
Temperature Rerating Curve
1000
TIME IN SECONDS
100
10
1
0.1
0.01
0.1
1
10
100
CURRENT IN AMPERES
1000
Product Characteristics
Materials
Body: Ceramic
Cap: Nickel–plated brass
Operating
Temperature
–55ºC to +125ºC
Terminal Strength
MIL-STD-202G, Method 211A, Test
Condition A
Thermal Shock
MIL-STD-202G, Method 107G, Test
Condition B: (5 cycles -65°C to +125°C)
Solderability
Reference IEC 60127 Second Edition
2003-01 Annex A
Vibration
MIL-STD-202G, Method 201 A
Humidity
MIL-STD-202G, Method 103B, Test
Condition A: High RH (95%) and Elevated
temperature (40°C) for 240 hours
Salt Spray
MIL- STD-202G, Method 101D, Test
Condition B
Cap1:
Product Marking
Cap2:
Brand logo, current and voltage
ratings
Series and agency approval
marks
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
322 Series
326
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/322.html for current information.
Axial Lead & Cartridge Fuses
3AB > Very Fast-Acting > 322 Series
Dimensions
Part Numbering System
322 000P / 332 000P Series
0322 xxxx M X P
Series
6.35 (.25")
Amp Code
31.75
(1.25")
Refer to Amp Code column of
Electrical Characteristics Table
Quantity Code
M = 1000
Packaging Code
X = Filler
Lead-free
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
Reel Size
N/A
N/A
N/A
5
100
1000
VX
HX
MX
N/A
N/A
N/A
N/A
N/A
100
1000
HX
MX
N/A
N/A
322Series
322 Series
Bulk
Bulk
Bulk
332 Series
Bulk
Bulk
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/322.html for current information.
327
322 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
328
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Axial Lead & Cartridge Fuses
3AB > Time Lag > 325/326 Series
325/326 Series
®
Lead-Free 3AB, Slo-Blo
PS
E
Fuse
Description
The 3AB Slo-Blo® Fuse with ceramic body construction
permits higher interrupting ratings and voltage ratings.
Ideal for applications where high current loads are
expected.
Features
t *OBDDPSEBODFXJUI6-
Standard 248-14
t "WBJMBCMFJODBSUSJEHF
and axial lead format
and with various
forming dimensions
Agency Approvals
Agency File Number
E10480
250mA - 10A
E10480
12A - 30A
LR 29862
PS
E
Ampere Range
NBK 030805E10480A-F/
NBK 260106JP1021A/B
SU050105012/6006/6007/7005
Applications
Used as supplementary protection in appliance or
utilization equipment to provide individual protection for
components or internal circuits.
250mA - 30A
1A - 30A
Electrical Characteristics for Series
2.5A - 3.2A/
7A - 30A
% of Ampere
Rating
Ampere Rating
Opening Time
100%
100mA – 30A
4 hours, Minimum
10mA - 30A
135%
200%
100mA – 30A
1 hour, Maximum
100mA – 3.2A
5 sec., Min., 30 sec., Max.
4A – 30A
5 sec., Min., 60 sec., Max.
325/326 Series
Agency
t 3P)4DPNQMJBOUBOE
Lead-free
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/325.html
or /326.html for current information.
329
Revised: Jan 12, 2009
325/326 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
3AB > Time Lag > Transientology
325/326 Series
Electrical Characteristic Specifications by Item
Amp Code
Ampere
Rating
(A)
Voltage
Rating
(V)
Interrupting
Rating
Nominal Cold
Resistance
(Ohms)
Nominal
Melting
I2t (A2 sec)
Agency Approvals
PS
E
.010
0.01
250
3324.8000
0.00148
.031
0.031
250
332.5000
0.0110
x
.062
0.062
250
91.7000
0.0276
x
.100
0.1
250
33.5500
0.0870
x
.125
0.125
250
22.4500
0.100
x
.150
0.15
250
15.4500
0.143
x
.175
0.175
250
8.9200
0.220
x
x
[email protected]
x
.187
0.187
250
7.7250
0.230
.200
0.2
250
6.7700
0.213
.250
0.25
250
4.4300
0.432
x
x
x
.300
0.3
250
3.2200
0.690
x
x
x
.375
0.375
250
2.1550
1.20
x
x
x
.400
0.4
250
1.9350
1.33
x
x
x
.500
0.5
250
1.3000
2.50
x
x
x
.600
0.6
250
0.9495
3.90
x
x
x
.700
0.7
250
0.7215
6.42
x
x
x
.750
0.75
250
0.6410
7.00
x
x
x
.800
0.8
250
0.5725
8.20
x
x
x
001.
1
250
0.3890
16.3
x
x
x
x
01.2
1.2
250
0.2860
22.0
x
x
x
x
[email protected]
[email protected]
[email protected]
x
1.25
1.25
250
0.2680
24.0
x
x
x
x
01.5
1.5
250
0.1975
40.1
x
x
x
x
01.6
1.6
250
0.1760
45.0
x
x
x
x
0.1210
x
002.
2
250
80.0
x
x
x
02.5
2.5
250
0.0835
136.0
x
x
x
x
x
02.8
2.8
250
0.0695
170.0
x
x
x
x
x
003.
3
250
0.0605
200.0
x
x
x
x
x
0.0539
214.0
x
x
x
x
x
03.2
3.2
[email protected]
[email protected]
250
004.
4
250
0.0761
9.71
x
x
x
x
005.
5
250
0.0522
25.0
x
x
x
x
x
6.25
6.25
250
007.
7
250
008.
8
250
[email protected]
[email protected]
0.0346
60.4
x
x
x
0.0227
47.3
x
x
x
x
x
0.0193
67.1
x
x
x
x
x
x
x
010.
10
250
0.0132
137
x
012.
12
250
0.0067
129
x
012.*
12
250
0.0011
445
015.
15
250
0.0050
245
015.*
15
250
0.0083
760
020.
250
0.0034
575
020.*
20
20
250
0.0042
1900
025.
25
125
0.0024
1030
030.
30
125
0.0019
1690
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
*Higher I t version available. 0325020.MXDP nominal I t is 2507 A Sec
2
2
2
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
325/326 Series
330
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/325.html
or /326.html for current information.
Axial Lead & Cartridge Fuses
3AB > Time Lag > 325/326 Series
Average Time Current Curves
.375A
.500A
.750A
1.0A
1.5A
2.0A
2.5A
3.0A
3.5A
4.0A
5.0A
6.25A
7.0A
8.0A
10.0A
12.0A
15.0A
20.0A
25.0A
30.0A
Temperature Rerating Curve
1000
100
TIME IN SECONDS
10
1
0.1
0.01
0.05 0.1
10
1
100
1000
CURRENT IN AMPERES
Soldering Parameters - Wave Soldering
260
Wave Parameter
240
220
200
Preheat:
180
(Depends on Flux Activation Temperature)
160
140
120
100
80
60
40
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
325/326 Series
Recommended Process Parameters:
280
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Recommended Hand-Solder Parameters:
Time (Seconds)
Cooling Time
Preheat Time
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/325.html
or /326.html for current information.
331
325/326 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
3AB > Time Lag > Transientology
325/326 Series
Product Characteristics
Materials
Terminal Strength
Solderability
Product Marking
Body: Ceramic
Cap: Nickel–plated brass
Leads: Tin–plated Copper
MIL-STD-202G, Method 211A,
Test Condition A
Reference IEC 60127 Second Edition
2003-01 Annex A
Operating Temperature
Cap1:
Humidity
Cap2:
–55ºC to +125ºC
MIL-STD-202G, Method 107G, Test
Condition B:(5 cycles - 65ºC to
125ºC)
MIL-STD-202G, Method 201A
MIL-STD-202G, Method 103B, Test
Condition A: High RH (95%) and
Elevated temperature(40ºC) for 240
hours
MIL-STD-202G, Method 101D, Test
Condition B
Thermal Shock
Vibration:
Brand logo, current and voltage
ratings
Series and agency approval
marks
Salt Spray
Dimensions
Part Numbering System
326 000P Series
325 000P Series
0325 xxxx M X P
0.813 (.032") ( 1/100 -15A)
1.016 (.040") (20 -30A)
6.985 (.275")
Series
Amp Code
6.35 (.25")
31.75
(1.25")
Refer to Amp Code column of
Electrical Characteristics Table
32.72
(1.288")
38.1
(1.50") TYP.
Quantity Code
M = 1000
Axial Lead Material: Tin coated copper.
Packaging Code
X = Filler
Lead-free
Packaging
Packaging Option
325 Series
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
Bulk
326 Series
Bulk
Bulk
Bulk
Bulk
Bulk
Packaging Specification
Quantity
Quantity &
Packaging Code
Reel Size
N/A
N/A
N/A
N/A
N/A
N/A
N/A
5
100
1000
1000
1000
1000
1000
VX
HX
MX
MX52
MX52L
MXD
MXF31
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
5
100
1000
1000
1000
VX
HX
MX
MXCC
MXD
N/A
N/A
N/A
N/A
N/A
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
325/326 Series
332
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/325.html
or /326.html for current information.
Axial Lead & Cartridge Fuses
"(.&5*#'VTF4FSJFT
388 Series
PS
E
Lead-Free 3AG, METI B Fuse
Description
The Littelfuse 388 Series is a 3AG size fuse that solves
a broad range of application requirements while offering
reliable performance and cost-effective circuit protection.
Features
t %FTJHOFEUP+BQBOFTF
Standard JIS C6575
t "WBJMBCMFJODBSUSJEHF
and axial lead form
and various forming
demensions
t 3P)4DPNQMJBOUBOE
Lead-free
Agency Approvals
Agency
PS
E
Applications
Agency File Number
Ampere Range
NBK131107-JP1021A
NBK010207JP1021A/B/C/D
1A - 30A
SU05001-8001
SU05001-7001/2/3/4
3A - 6A
7A/10A - 30A
Used as supplementary protection in appliance or
utilization equipment to provide individual protection for
components or internal circuits.
Electrical Characteristics for Series
% of Ampere
Rating
Opening Time
130
1 Hour, Minimum
160
1 hour, Maximum
200
120 seonds, Maximum
1A - 30A
Electrical Characteristic Specifications by Item
1
Voltage
Rating
Breaking
Capacity
Nominal
Resistance Cold
Ohms
(ohms)
Nominal
Melting 2T
(A2Sec.)
Agency Approvals
PS
E
001.
1
250
0.1651
0.800
x
x
01.5
1.5
250
0.0845
2.680
x
x
002.
2
250
0.0522
7.200
x
x
02.5
2.5
250
0.0375
9.540
x
003.
3
250
0.0313
22.10
x
x
x
004.
4
250
0.0239
28.50
x
x
x
005.
5
250
0.0184
66.10
x
x
x
006.
6
250
0.0140
116.0
x
x
x
007.
7
250
0.0127
118.0
x
x
x
008.
8
250
0.0109
166.0
x
x
009.
9
250
0.0082
298.0
x
x
100A @ 250Vac
x
010.
10
250
0.0072
234.6
x
x
x
012.
12
250
0.0052
490.5
x
x
x
015.
15
250
0.0042
1029
x
x
x
020.
20
250
0.0029
2041
x
x
x
025.
25
250
0.0019
3717
x
x
x
030.
30
250
0.0013
7531
x
x
x
388 Series
Amp Code
Amp
Rating
Depending on the application and mounting, the fuse heating at max. ambient temperature in a closed fuseholder should be considered.
p = pending
Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/388.html for current information.
333
Revised: Jan 12, 2009
388 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
"(.&5*#'VTF4FSJFT
Average Time Current Curves
1A
1.5A
2A
2.5A
3A
4A
5A
6A
7A
8A
10A
12A
15A
20A
25A
30A
Temperature Rerating Curve
1000
100
TIME IN SECONDS
10
1
0.1
0.01
0.1
1
10
CURRENT IN AMPERES
1000
100
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
200
Preheat:
180
(Depends on Flux Activation Temperature)
160
140
120
100
80
60
40
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Recommended Hand-Solder Parameters:
Time (Seconds)
Cooling Time
Preheat Time
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
388 Series
334
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/388.html for current information.
Axial Lead & Cartridge Fuses
"(.&5*#'VTF4FSJFT
Product Characteristics
Materials
Body: Glass
End Caps: Nickel–plated brass
Leads: Tin–plated Copper
Terminal Strength
MIL-STD-202G, Method 211A,
Test Condition A
Solderability
Reference IEC 60127 Second Edition
2003-2001 Annex A
Cap1:
Product Marking
Cap2:
Brand logo, current and voltage
ratings
Series and agency approval
marks
Dimensions (mm)
Operating Temperature
-55ºC to +125ºC (consider de-rating)
Thermal Shock
MIL-STD-202G Method 107 G, Test
conditon B:(5 cycles - 65ºC to 125ºC)
Vibration
MIL-STD-202G, Method 201A
Humidity
MIL-STD-202G, Method 103B, Test
Condition A: High RH (95%) and
Elevated temperature (40°C) for 240
hours
Salt Spray
MIL-STD-202G, Method 101D, Test
Condition B
Part Numbering System
388 000P Series
0388 xxxx M X E P
388 000EP Series
Series
0.813 (.032")
6.985 (.275")
Amp Code
Refer to Amp Code column of
Electrical Characteristics Table
6.35 (.25")
32.72
(1.288")
31.75
(1.25")
38.1
(1.50") TYP.
Quantity Code
M = 1000
Axial Lead Material: Tin coated copper.
Packaging Code
X = Filler
Option Code
E
= Axial leaded fuses
Blank = Cartridge fuses
Lead-free
Packaging Option
388 Series
Bulk
Bulk
Packaging Specification
Quantity
Quantity &
Packaging Code
Reel Size
N/A
N/A
1000
1000
MX
MXE
N/A
N/A
388 Series
Packaging
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/388.html for current information.
335
388 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
336
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Axial Lead & Cartridge Fuses
3AB > Fast-Acting > 505 Series
505 Series,
Lead-free 3AB, Fast-Acting Fuse
Description
""3$5('&(3$/,&)64(8,5+3(/$3-$%.(,05(33625
,0*3$5,0*,0$&1/2$&59//2$&-$*(8+,&+,48(..
46,5(')13&,3&6,52315(&5,10,0+,*+(0(3*:$22.,&$5,104
Features
; 1 &1/2.,$05$0'
; 0$&&13'$0&(8,5+
($')3((
60'(383,5(34$%13$513,(4
5$0'$3'!
; 62(3,1305(33625,0*
3$5,0*1)
/2(3(4
; 7$,.$%.(,0&$353,'*($0'
$9,$..($')13/$0'8,5+
; 1/2$&5)13/)$&5131)
7$3,164.($')13/,0*
9//
',/(04,104
Agency Approvals
Agency
Agency File Number
Ampere Range
(&1*0,4(',.(
Applications
; !0,05(33625,%.(18(3
622.,(4! ; +$4(18(3 622.,(4
Electrical Characteristics for Series
% of Ampere
Rating
Ampere Rating
/,065(4$9,/6/
%
%
Opening Time
/,065(4$9,/6/
4(&$9,/6/
%
Amp
Code
Amp
Rating
(A)
Max
Voltage
Rating
(V)
010.
10
450
012.
12
450
[email protected]
[email protected]
[email protected]
[email protected]
016.
16
500
020.
20
500
025.
25
500
030.
30
500
Interrupting
Rating
[email protected]
[email protected]
Nominal
Cold
Resistance
(Ohms)
Agency Approvals
Nominal
Melting
I T (A2Sec.)
2
0.0167
91
X
X
X
0.0117
192
X
X
X
0.0073
51
X
X
0.0056
101
X
X
0.0048
145
X
X
0.0038
203
X
X
505 Series
Electrical Characteristics Specifications by Item
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/505.html for current information.
337
Revised: Jan 20, 2009
505 Series
Introduction
to &
Circuit
Protection
Axial Lead
Cartridge
Fuses
Transientology
3AB > Fast-Acting
> 505 Series
Temperature Rerating Curve
10A
12A
16A
20A
25A
30A
Average Time Current Curves
10000
1000
TIME IN SECONDS
100
10
1
0.1
0.01
0.001
1
10
100
1000
CURRENT IN AMPERES
Soldering Parameters - Wave Soldering
Recommended Process Parameters:
280
260
Wave Parameter
240
220
Preheat:
200
(Depends on Flux Activation Temperature)
180
160
140
120
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100° C
Temperature Maximum:
Preheat Time:
150° C
60-180 seconds
100
80
60
40
Solder Pot Temperature:
260° C Maximum
Solder Dwell Time:
2-5 seconds
240
230
220
210
200
190
180
170
160
150
140
130
120
110
90
100
80
70
60
50
40
30
0
0
20
20
10
Temperature (°C) - Measured on bottom side of board
300
Recommended Hand-Solder Parameters:
Time (Seconds)
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Cooling Time
Preheat Time
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
505 Series
338
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/505.html for current information.
Axial Lead & Cartridge Fuses
3AB > Fast-Acting > 505 Series
Product Characteristics
Material
Terminal Strength
Solderability
Product Marking
Packaging
Body: Ceramic
Cap: Nickel–plated brass
Leads: Tin–plated Copper
Operating Temperature
–55ºC to +125ºC
MIL-STD-202G, Method 211A, Test
Condition A
Reference IEC 60127 Second
Edition 2003-01 Annex A
Cap 1: Brand logo, current and voltage rating
Cap 2: Series and agency approval
markings
Thermal Shock
MIL-STD-202G, Method 107G, Test
Condition B: (5 cycles –65°C to
+125°C)
Vibration
MIL-STD-202G, Method 201A
Humidity
MIL-STD-202G, Method 103B, Test
Condition A. high RH (95%) and
elevated temperature (40°C) for 240
hours
Available in Bulk (M=1000 pcs/pkg)
Salt Spray
MIL-STD-202G, Method 101D, Test
Condition B
Dimensions
Part Numbering System
0505 xxxx M X E P
505 000P Series
505 000EP Series
Series
Amp Code
6.985 (.275”) Max.
Refer to Amp Code column of
Electrical Characteristics Table
0.813 (.032”) (10 - 16A)
1.016 (.040”) (20- 30A)
Quantity Code
M = 1000
6.35 (.25”)
31.75
(1.25”)
32.72
(1.288”)
Packaging Code
38.1
(1.50”) TYP.
X = Filler
Option Codes
E : Axial Leaded
Others : special options.
Please call
Littelfuse for detail.
All Dimensions in mm
Packaging
N/A
N/A
1000
1000
MX
MXE
N/A
N/A
505 Series
Bulk
Bulk
505 Series
Lead-Free
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/505.html for current information.
339
505 Series
Introduction to Circuit Protection
Transientology
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
340
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Special Application Fuses
242 Series Barrier Network Fuse
Barrier Network Fuse 242 Series
Description
The 242 Series hazardous area barrier network fuse
offers a range of fuses designed to enable greater safety
operating electronic equipment within potentially explosive
environments.
Features
t .FFUT#BSSJFS/FUXPSL
Standards (EN50020)
for hazardous
applications.
t "WBJMBCMFJOCPUIBYJBM
lead and surface
mount.
t )JHIJOUFSSVQUJOH
rating. Meets the
Agency Approvals
Agency
1500A minimum.
Agency File Number
Ampere Range
Recognized under the
components program
of Underwriters Laboratories
(JDYX2-10480)
Applications
0.050 - 0.250 A
t 5ZQFJQSPUFDUFE
electrical equipment;
Electrical connections
and components, Test
equipment
Electrical Characteristics
% of Ampere
Rating
Opening Time
110%
4 hours, Minimum
300%
10 seconds, Maximum
1000%
0.002 seconds, Maximum
Electrical Characteristics
Amp
Code
Body
Color
Coding
0.050
.050
Red
0.080
.080
Green
0.100
.100
Blue
Interrupting
Rating
Nominal
Nominal
Cold
Melting
Resistance 2
I t (A2 Sec.)
(Ohms)
11.34
4000A @
250VAC/VDC
Agency
Approvals
0.000103
x
8.19
0.000214
x
3.60
0.000977
x
0.160
.160
Violet
3.00
0.00157
x
0.200
.200
Brown
2.68
0.0038
x
0.250
.250
Black
1.6
0.00579
x
242 Series
Ampere
Rating
(A)
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/242.html for current information.
341
Revised: Jan 12, 2009
Barrier Network Fuse 242 Series
Introduction
to Application
Circuit Protection
Special
Fuses
242 Series Barrier Transientology
Network Fuse
Average Time Current Curves
.050 A
.080 A
.100 A
.125 A
.160 A
.200 A
.250 A
Dimensions
4.60mm
(.181")
100
1.90mm
(.075")
3.02mm
(.119")
TIME IN SECONDS
.635mm
(.025")
8.40mm
(.331")
10
4.60mm
(.181")
1
1.90mm
(.075")
3.02mm
(.119")
8.40mm
(.331")
0.1
9.80mm
2.90mm
0.01
3.20mm
0.001
0.1
1
1000
100
10
CURRENT IN AMPERES
Soldering Parameters
Pre Heat
Pb – Free assembly
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
60 – 180 secs
5°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
Peak Temperature (TP)
250
+0/-5
Critical Zone
TL to TP
Ramp-up
Average ramp up rate (Liquidus Temp
(TL) to peak
Reflow
tP
TP
- Temperature Min (Ts(min))
TL
TS(max)
Temperature
Reflow Condition
Time within 5°C of actual peak Temp. (tp)
20 – 40 seconds
5°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
260°C
Ramp-down
Preheat
TS(min)
tS
25
time to peak temperature
(t 25ºC to peak)
°C
Ramp-down Rate
tL
Wave Soldering
Product Characteristics
Time
260°C, 10 seconds max.
Part Numbering System
Operating Temperature
–40OC to 125OC.
Thermal Shock
Withstands 5 cycles of – 55OC to
125OC
Vibration
Per MIL-STD-202F
Insulation Resistance
(After Opening)
Greater than 10,000 ohms.
SERIES
AMP CODE
0242.050UAT1
Refer to Amp Code column in the
Electrical Specifications table.
QUANTITY & PACKAGING CODE
HAT1 = 100 pcs, Axial Leaded, Ammo Pack T1 Tape
UAT1 = 500 pcs, Axial Leaded, Ammo Pack T1 Tape
UR = 500 pcs, Surface Mount, Tape & Reel
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Barrier Network Fuse 242 Series
342
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/242.html for current information.
Special Application Fuses
259 Series Safe-T-Plus Fuse
Safe-T-Plus Fuse 259 Series
Description
The Safe-T-Plus 259 Series offers a range of encapsulated
fuses designed to enable greater safety operating electronic
equipment within potentially explosive environments. Originally
designed to serve the needs of gas plants, petrochemical and
processing industries, these fuses are certitifed for use within
intrinsically safe apparatus (CENELEC EN50014 to 039 and IEC
60079-11).
The encapsulation material is Polyamide 6 at a minimum depth
of 1mm (3mm typically) and has a CTI (Comparative Tracking
Index) of greater than 175. The leads are separated by a
minimum clearance and creepage distance of 9 mm and hence
are suitable for use in intrisically safe appartatus for voltage not
exceeding 125V rms (190V peak).
Agency Approvals
Agency
Agency File Number
Baseefa
Baseef02ATEX0071U
Features
Ampere Range
t )FSNFUJDBMMZTFBMFE
t .FFUTDFSUJmDBUJPOGPS
use within intrinsically
t ""SBOHFPQUJPOT
safe apparatus for
t %FTJHOFEUPPQFSBUF
applications such as gas
within environments
plants, petrochemical
where there is danger
and processing
of gas explosion from
industries
faulty circuits
.062A - 1.0A
Electrical Characteristics
% of Ampere
Rating
Opening Time
100%
4 hours, Minimum
200%
5 seconds, Maximum
Applications
t 5FTUJOHNFBTVSJOHPS
processing electronic
and electrical equipment
Electrical Characteristics
Agency
Approvals
Nominal
Cold
Resistance
(Ohms)
Nominal
Melting
I2t (A2 Sec.)
Nom
Voltage
Drop
(mV)
.062
7.00
0.00016
2.10
x
.125
1.70
0.0012
1.30
x
.250
0.67
0.0095
0.83
x
.375
0.395
0.025
0.81
x
0.302
0.0598
0.78
x
0.175
0.153
0.23
x
x
Amp
Code
0.062
0.125
0.250
0.375
0.500
.500
0.750
.750
Interrupting
Rating
50A @ 125 VAC
300A @ 125 VDC
1.00
1.00
0.128
0.256
0.24
3.00
003
0.275
1.27
0.131
5.00
005
0.0158
4.14
0.110
Baseefa
259 Series
Ampere
Rating
(A)
Schedule of limitations.
1) The fuse must be so mounted that creepage and clearance distances aren’t impaired in any way.
2) When used in intrinsically safe apparatus it will be necessary to determine a surface temperature classification for the fuse.
3) Max surface temp rise at 170% rated current £750mA=40ºC, 1A=45ºC, 3A=63ºC and 5A=114ºC.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/259.html for current information.
343
Revised: Mar 27, 2009
Safe-T-Plus Fuse 259 Series
Introduction
to Application
Circuit Protection
Special
Fuses
Transientology
259 Series Safe-T-Plus
Fuse
Per MIL-STD-202F
Insulation Resistance
(After Opening)
Greater than 10,000 ohms.
10
Soldering Parameters
Wave Soldering
5A
Vibration
100
3.15 A
Withstands 5 cycles of – 55°C to
125°C
.25 A
.375 A
.50 A
.75 A
1A
Thermal Shock
.062 A
– 55°C to 90°C.
TIME IN SECONDS
Operating Temperature
.125 A
Average Time Current Curves
Product Characteristics
260°C, 10 seconds max.
1
0.1
Dimensions
0.01
(.512")
13mm
(.025")
.635mm
0.001
0.1
(.315")
8mm
(.197")
5mm
100
10
CURRENT IN AMPERES
1
1000
Part Numbering System
(.394")
10mm
0259.062M
SERIES
AMP Code
The dot is poisitioned before
the Packaging Suffix with whole
ratings and within the numbering
sequence for fractional ratings.
Refer to Amp Code column in the
Electrical Specifications table.
Example:
1 amp product is
0259001.M
(.062 amp product shown).
PACKAGING Code
M = Bulk pack, 1000 pcs
T = Bulk pack, 10 pcs
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Safe-T-Plus Fuse 259 Series
344
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/259.html for current information.
Special Application Fuses
481 Series Alarm Indicating Fuse
481 Series Alarm Indicating Fuse
Description
481 Series alarm indicating fuses are designed to reduce
down time by immediately pinpointing the blown (open)
circuit while triggering an LED or audio alarm. This item
requires 482 Series mating fuse holder.
All ranges of 481 Series fuses are available as our original
design, and the 2-20 amp range is now available as a RoHS
compliant option (use the “P” designator when ordering).
See the part numbering section of this data sheet for related
ordering instructions.
Agency Approvals
Features
Agency
t $PMPSDPEFEJOEJDBUPS
flags indicate ampere
rating.
Agency File Number
E71611
t $MFBSQMBTUJDMFOT
option available for
additional safety.
LR 29862
Electrical Characteristics
% of Ampere
Rating
Opening Time
100%
10 Minutes, Minimum
150%
5 Minutes, Maximum
t #PEZJTDPOTUSVDUFEPG
black plolyphenylene
sulfide with UL-94V0
flammability rating.
t $POUBDUTNBEFPG
bright alloy-plated
beryillioum copper.
Applications
Ideal for telecommunications and control panel circuits
Electrical Characteristics
Amp
Code
0.180*
0.200*
0.250*
0.375*
0.500*
0.650*
0.750*
1.00*
1.33*
1.50*
2.00
2.50
3.00
3.50
4.00
5.00
7.50
10.0
12.0
15.0
20.0**
.180
.200
.250
.375
.500
.650
.750
001.
1.33
01.5
002.
02.5
003.
03.5
004.
005.
07.5
010.
012.
015.
020.
Max
Voltage
Rating
(V)
450A @ 60 VDC
125 VAC
&
125 VDC
Body
Color
Code
Nominal
Cold Resistance
(Ohms)
Nominal Melting
I2t (A2 Sec.)
Yellow
Red/Black
Violet
Gray/White
Red
Black
Brown
Gray
White
Yellow/White
Orange
Orange/White
Blue
Blue/White
Brown/White
Green
Black/White
Red/White
Green/Yellow
Red/Blue
Green/White
6.25
5.70
4.20
2.00
1.52
1.25
.980
.665
.480
.385
.120
.0904
.0670
.0415
.0350
.0285
.0113
.00840
.00660
.00580
.00394
0.00808
0.0140
0.0356
0.028
0.139
0.278
0.363
0.733
1.58
2.55
5.29
9.46
11.2
10.5
15.4
26.2
42.8
115.3
222.5
294.22
570.0
Interrupting
Rating
300A @ 125 VAC
(up to 20A)
300A @ 125 VDC
(up to 15A)
200A @ 125 VDC
(up to 20A)
Agency
Approvals
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
481 Series
Ampere
Rating
(A)
* 0.180A thru 1.5A items are not available for sale as a RoHS compliant “P” option
**20A Fuseholder must be used. Fuse is keyed to prevent insertion in lower rated holders.
20A Fuseholder is designed to accept all ratings up to 20 amperes.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/481.html for current information.
345
Revised: Jan 12, 2009
Alarm Indicating Fuse 481 Series
Introduction
to Application
Circuit Protection
Special
Fuses
Transientology
481 Series Alarm Indicating
Fuse
Product Characteristics
Body: Polyphenylene Sulfide (UL 94VO)
Material
Terminations: Beryllium Copper/Tin Plated
Operating Temperature
– 55OC to 90OC.
Thermal Shock
Withstands 5 cycles of – 55OC to
125OC
Insulation Resistance
(After Opening)
Greater than 10,000 ohms.
Optional Lens: Nylon
Vibration
Per MIL-STD-202F
Dimensions
22.9mm
(.90") MIN.
17.8mm (.70")
21.3mm
(0.84")
REF.
LENS
11.7mm
(.46")
16.9mm
(.665") MAX.
100
2.77
(.109")
8mm
.23")
4.45
(.175")
TIME IN SECONDS
19.6mm
(.77")
1000
18/100 A
1/4 A
1/2 A
65/100 A
3/4 A
1A
1 1/3 A
2A
3A
4A
5A
7 1/2 A
10 A
12 A
15 A
20 A
Average Time Current Curves
2.79
(.110")
5.3mm
(.21")
1-15A
20A*
10
1
*20A Fuseholder must be used. Fuse is keyed
to prevent insertion in lower rated holders.
20A Fuseholder is designed to accept all
ratings up to 20 amperes.
0.1
0.01
0.1
Part Numbering System
1
10
100
CURRENT IN AMPERES
1000
0481 .180 H XL P
RoHS ITEM OPTION CODE:
Blank = Standard design item
P = RoHS compliant version item
(available in 2-20 amp range only)
OPTION CODE:
Blank = Standard
XL = Protective Lens
QUANTITY CODE:
V = 5 pack
H = 100 pack
AMP CODE
(See Electrical Characteristics Table)
SERIES
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Alarm Indicating Fuse 481 Series
346
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/481.html for current information.
Special Application Fuses
482 Series Alarm Indicating Fuse Holder
482 Series Fuseholders
Description
Ideal for telecommunications and control panel circuits,
the 482 Series fuseholder series is designed for use
with Littelfuse 481 Alarm Indicating Fuses. Each holder
is designed to accept other manufacturer’s replacement
fuses as well.
The fuseholder is available in three versions:
PCB Mount - 15A: Can be soldered directly to a printed
circuit board. Rated up to 15 amperes. Available in single
pole or gangable up to 20 poles. Fuseholder is keyed to
prevent insertion of 20 ampere fuse.
Agency Approvals
Agency
Panel Mount - 20A: Available in a single pole version rated
up to 20 amperes. Large leads for wire attachment.
Agency File Number
Panel Mount - 15A: 15 ampere gangable version of
fuseholder is keyed to prevent insertion of 20 ampere fuse.
E71611 (20A Panel Mount Only)
LR 29862
Product Characteristics
15A PCB Mount and Panel Mount
20A Panel Mount
Electrical Rating
Rated at 15 amperes up to 125 VAC/ VDC
Rated at 20 amperes up to 125 VAC/ VDC
Body Material
Thermoplastic (UL 94V-0)
Black Phenolic (UL 94V-0)
Fuse Terminal Material
Tin-plated Beryllium Copper
Tin-plated Copper Alloy
Alarm Terminal Material
Tin-plated Brass
Tin-plated Copper Alloy
Operating Temperature
–55OC to +125OC.
–40OC to +85OC.
Thermal Shock
Withstands 5 cycles of – 55OC to 125OC
Withstands 5 cycles of – 55OC to 125OC
Vibration
Per MIL-STD-202F
Per MIL-STD-202F
Insulation Resistance
(After Opening)
Greater than 10,000 ohms.
Greater than 10,000 ohms.
482 Series
482 Fuseholder Series
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/482.html for current information.
347
Revised: Jan 12, 2009
Alarm Indicating Fuseholder 482 Series
Introduction
to Application
Circuit Protection
Special
Fuses
Transientology
482 Series Alarm Indicating
Fuse Holder
Ordering Information
20A Panel Mount Fuseholder
Type
1 Pole
Holder Length *
6.40mm (25”)
20A Panel Mount
0482 2001ZXPF
* NOTE: 20 ampere version of 482 Series Panel Mount fuseholders come standard as a single pole unit with flush edges on
both sides (no “keys” typical with 15A units). Please refer to the diagrams on the following page for additional information.
15A PCB Mount and Panel Mount Fuseholders
Type
1 Pole
2 Pole
3 Pole
4 Pole
5 Pole
6 Pole
7 Pole
8 Pole
9 Pole
10 Pole
11 Pole
12 Pole
13 Pole
14 Pole
15 Pole
16 Pole
17 Pole
18 Pole
19 Pole
20 Pole
Holder Assembly Length*
6.40mm (25”)
12.80mm (.50”)
19.05mm (.75”)
25.04mm (1.0”)
31.75mm (1.25”)
38.10mm (1.50”)
44.45mm (1.75”)
5.80mm (2.00”)
57.15 (2.25”)
63.50mm (2.75”)
69.85mm (2.75”)
76.20mm (3.00”)
82.55mm (3.25”)
88.90mm (3.50”)
95.25mm (3.75”)
101.60mm (4.00”)
107.95mm (4.25”)
114.30mm (4.50”)
120.65mm (4.75”)
127.00mm (5.00”)
15A PCB Mount
0482 0001ZXB
0482 0002ZXB
0482 0003ZXB
0482 0004ZXB
0482 0005ZXB
0482 0006ZXB
0482 0007ZXB
0482 0008ZXB
0482 0009ZXB
0482 0010ZXB
0482 0011ZXB
0482 0012ZXB
0482 0013ZXB
0482 0014ZXB
0482 0015ZXB
0482 0016ZXB
0482 0017ZXB
0482 0018ZXB
0482 0019ZXB
0482 0020ZXB
15A PCB Mount - Flush
0482 0001ZXBF
0482 0002ZXBF
0482 0003ZXBF
0482 0004ZXBF
0482 0005ZXBF
0482 0006ZXBF
0482 0007ZXBF
0482 0008ZXBF
0482 0009ZXBF
0482 0010ZXBF
0482 0011ZXBF
0482 0012ZXBF
0482 0013ZXBF
0482 0014ZXBF
0482 0015ZXBF
0482 0016ZXBF
0482 0017ZXBF
0482 0018ZXBF
0482 0019ZXBF
0482 0020ZXBF
15A Panel Mount
0482 0001ZXP
0482 0002ZXP
0482 0003ZXP
0482 0004ZXP
0482 0005ZXP
0482 0006ZXP
0482 0007ZXP
0482 0008ZXP
0482 0009ZXP
0482 0010ZXP
0482 0011ZXP
0482 0012ZXP
0482 0013ZXP
0482 0014ZXP
0482 0015ZXP
0482 0016ZXP
0482 0017ZXP
0482 0018ZXP
0482 0019ZXP
0482 0020ZXP
15A Panel Mount - Flush
0482 0001ZXPF
0482 0002ZXPF
0482 0003ZXPF
0482 0004ZXPF
0482 0005ZXPF
0482 0006ZXPF
0482 0007ZXPF
0482 0008ZXPF
0482 0009ZXPF
0482 0010ZXPF
0482 0011ZXPF
0482 0012ZXPF
0482 0013ZXPF
0482 0014ZXPF
0482 0015ZXPF
0482 0016ZXPF
0482 0017ZXPF
0482 0018ZXPF
0482 0019ZXPF
0482 0020ZXPF
* NOTE: 15 ampere gangable version of PCB Mount and Panel Mount fuseholders are keyed to prevent insertion of 20 ampere fuse.
Please refer to “A” dimension of diagrams on following page. For additional terminal lengths, please contact Littelfuse.
Flush Side Options
Available for PCB and
Panel Mount Version
5 POLE HOLDER ASSEMBLY
WITH FLUSH OPTION
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Alarm Indicating Fuseholder 482 Series
348
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/482.html for current information.
Special Application Fuses
482 Series Alarm Indicating Fuse Holder
Dimensions
15A Panel Mount Series:
15A PCB Mount Series:
21.3mm
(.84")
TYP
6.4mm
(.25")
TYP
FEMALE LATCHING & FLUSH SIDE
WITHOUT TABS
FEMALE & MALE LATCHING
WITH TABS
A
19.8mm
(.78" .03 )
TYP
A
FEMALE & MALE LATCHING
WITH TABS AND NO MOUNTING HOLES
TYPICAL HOLDER ASSEMBLY
1.6mm
(.062")
TYP
12.4mm
(.49")
18.5mm
(.73")
Alarm Terminal
TYPICAL HOLDER ASSEMBLY
4.1mm
(.16")
TYP
30.9mm (1.215")
30.7mm (1.210")
37.1mm
(1.46")
6.4mm
(.25")
30.9mm (1.215")
30.7mm (1.210")
6.4mm
(.250") .005
Ø 2.3mm HOLES
10.7mm
(.090")
(.420") .005
(3 HOLES)
FEMALE LATCHING & FLUSH SIDE
WITH TABS
6.9mm
(.27" .005 )
21.8mm
(.86" .005 )
Ø 4.1mm
TYPICAL CUT-OUT IN
(.160")
MOUNTING HOLE PANEL OR CHASSIS
(2 HOLES)
21.3mm
(.84")
6.4mm
(.250") .005
6.4mm
(.25")
15.7mm
(.62")
RECOMMENDED P. C. BOARD
MOUNTING HOLES
24.9mm
(.98" .03 )
1.6mm
(.062")
TYP
0.6mm
(.025")
TYP
20A Panel Mount Series:
9.0mm (.355")
12.4mm
18.5mm
(.49" .010 )
(.73" .010 )
.150''
DIA,
(2 Holes)
21.3mm
(.84")
6.4mm
(.25")
6.4mm
(.25")
15.7mm
(.62")
21.34mm (.84")
24.9mm
(.98" .03 )
30.9mm
(1.212")
1.6mm
(.062")
TYP
(1.47")
37.34mm
0.6mm
(.025")
TYP
30.9mm (1.215")
30.7mm (1.210")
9.0mm (.355")
12.4mm
18.5mm
(.49" .010 )
(.73" .010 )
6.9mm
(.27" .005 )
21.8mm
(.86" .005 )
Ø 4.1mm
TYPICAL CUT-OUT IN
(.160")
MOUNTING HOLE PANEL OR CHASSIS
(2 HOLES)
RECOMMENDED PANEL
MOUNTING HOLES
482 Series
NOTE: The 20 ampere single pole holder is designed to
accept all fuse ratings up to 20 amperes.
20 ampere fuseholders should be spaced 12.7mm
(0.50) apart when loaded to maximum capacity, center
to center to insure proper heat dissipation under normal
operation.
Heatsinking may be required for operation in higher
ambient temperatures or alternate configurations.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
© 2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/482.html for current information.
349
Alarm Indicating Fuseholder 482 Series
WWW.LITTELFUSE.COM
To assist you with your electronics design and selection processes,
Littelfuse also offers:
Comprehensive Online Product Specs on Littelfuse.com—Featuring easy-to-use
navigation, search and selection tools, as well as additional product details.
You can rely on Littelfuse.com for instant answers and continuously
up-to-date information.
Printed Product Catalogs—For offline and off-the-shelf convenience, our printed
product catalogs include data sheets, selection tables and tutorials covering all
of our core technologies. Contact your Littelfuse product representative or visit
www.littelfuse.com/catalogs to check availability.
Circuit Protection Design Guides—Our application design center website,
www.littelfuse.com/designcenter offers a wealth of circuit protection guidance
to help you select and apply the best circuit protection solution for your
application.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
As the world's #1 brand in circuit protection Littelfuse offers the broadest
and deepest portfolio of circuit protection products and a global network
of technical support, backed by more than 80 years of application design
expertise. Visit our design support center to access:
> Reference Designs
> Application Notes
> Application Testing
> SPICE Models
> Local Technical Support
> Product Samples
> Technical Articles
> Certification Documents
> Data Sheets
WWW.LITTELFUSE.COM/DESIGNSUPPORT
Littelfuse offers technologies that protect sensitive electronics and their users against electrostatic discharge (ESD), load switching,
lightning strikes, overloads, short circuits, power cross, ground faults and other threats.
Overcurrent protection products:
Fuses Littelfuse offers the world’s broadest range of fuse types and ratings, including
cartridge, leaded, surface mount and thin film designs
PTCs Positive Temperature Coefficient thermistor technology provides
PRODUCT
CATALOG
& DESIGN
resettable current-limiting protection
PRODUCT
CATALOG
& DESIGN
GUIDE
Overvoltage protection products:
UCT
UCT
DU
DUC
ROD
PR
PRO
LOG
ALO
ATA
C
CAT
& DESIGN
GUIDE
Varistors Littelfuse offers surface mount Multi-layer Varistors (MLVs) and
industrial Metal Oxide Varistors (MOVs) to protect against transients
GDTs Gas Discharge Tubes (GDTs) to dissipate voltage through
a contained plasma gas
Thyristors Littelfuse's solid state switches control the flow of current in
a wide range of appliances, tools and equipment
SIDACtor Devices Overvoltage protection specifically designed for telecom
®
GUIDE
PRODUCT
CATALOG
& DESIGN
PRODUCT
CATA
GUID
E LOG
& DESIGN
ODUC
GUIDPR
E
T
CATA PR
LOG OD
UCT
& DESIGCA
N TALO
G
GUIDE
& DE
SIGN
GUID
E
DUCT
PRO
LOG
CATA
SIGN
& DE IDE
GU
Silicon
PulseGuard® ESD Suppressors
Produc Protection
Array
ts
(SPA)
e
T be
Tu
rge Tub
Gas Discha ts
duc
(GDT) Pro
fici
Coef
ture ucts
pera
Tem tor Prod
tive
is
Posi Therm
)
TC
(P
ent
and datacom requirements
TVS Diodes Silicon transient voltage suppression (TVS) devices
SPA™ Silicon Protection Arrays designed for analog and digital signal line protection
PulseGuard® ESD Suppressors Small, fast-acting Electrostatic Discharge (ESD) suppressors
To request catalogs for the Littelfuse portfolio of circuit protection technologies, please contact your authorized Littelfuse product
representative or visit our website at www.littelfuse.com/catalogs
©2009 Littelfuse, Inc.
descriptions and illustrative material in this literature are as accurate as known at the time of publication,
FORM NO. EC117
Courtesy Specifications
of Steven Engineering,
Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
but are subject to changes without notice. Visit www.littelfuse.com for the most up-to-date technical information.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement