Modine Varsity ZFV, ZFF, ZSV, ZSF Unit Ventilator Installation and Service Manual

Below you will find brief information for Unit Ventilator Varsity ZFV, Unit Ventilator Varsity ZFF, Unit Ventilator Varsity ZSV, Unit Ventilator Varsity ZSF. The Varsity ZFV, ZFF, ZSV and ZSF models are vertical unit ventilators that provide heating and cooling for a variety of applications. The units are available in a variety of sizes and configurations to meet the needs of your specific application. The manual includes details on the proper installation, operation, and maintenance of these units.

PDF Download
Document
Modine Varsity ZFV, ZFF, ZSV, ZSF Installation Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Vertical Unit Ventilator
  • Heating and Cooling
  • Various Sizes and Configurations
  • Installation and Service
  • Operation and Maintenance
  • Direct Expansion (DX) Cooling
  • Chilled Water Cooling
  • Hot Water Heating
  • Steam Heating
  • Outside Air and Return Air Dampers

Frequently asked questions

These units use R-410A refrigerant.

The maximum lift for the condensate pump is 15 feet (20 gph).

The condensate drain line must be connected to the main drain system in accordance with any local codes and general good piping practice.

Do not operate the units within steam pressure greater than 10 psig. Steam pressure must be 10 psig or lower to avoid excessive discharge air temperatures that could cause burns or personal injury.

Hot water supplied to the hot water heating option must not exceed 200°F temperature or 125 PSIG pressure.

The outside air lockout temperature on Carel units is factory set to 60˚F and is adjustable.
Preparing document for printing…
0%