Water Group Aqua-Flo Filters
F i lt e r s
The Aqua Flo range of filters and replacement cartridges improves water
quality in the home, farm or business. Requiring no special tools, Aqua Flo filters
are easily installed and cartridge replacement is simple and worry-free.
Aqua Flo replacement cartridges will fit most makes of filters with standard 10”
and 20” housings.
String Wound (SW) Polypropylene Cartridge Filters

String wound filters reduce
sediment from a variety of liquids

Low pressure drop

Withstand high
temperatures

Wide chemical compatibility
Flow Rate vs Approximate Net Pressure Drop (SW Filters)
25
SW-5-20
SW-30-10
Flow Rate (gpm)
20
SW-1-20
15
Material
Information
SW-30-10
10
SW-50-10
SW-5-10
SW-10-10
Filter Media –
Polypropylene
5
0
1
2
Pressure Drop (psi)
3
Core –
Polypropylene
5
Model #
Maximum
Size
26273
SW-5-10
2.5" X 10"
5
5 gpm
26246
SW-10-10
2.5" X 10"
10
7 gpm
26247
SW-30-10
2.5" X 10"
30
10 gpm
26249
SW-50-10
2.5" X 10"
50
10 gpm
26250
SW-1-20
2.5" X 20"
1
15 gpm
Item #
SW cartridge filters are manufactured from polypropylene cord which
is wound around the polypropylene core. These cartridge filters are
economical solution for reduction of sediment, sand, rust and scale
particles from the drinking water.
Micron
Flow Rate
(gpm)
26251
SW-5-20
2.5" X 20"
5
15 gpm
26252
SW-30-10
4.5" X 10"
30
20 gpm
26281
SW-1-10BV
4.5” X 10”
1
20 gpm
26282
SW-5-10BV
4.5” X 10”
5
20 gpm
26283
SW-10-10BV
4.5” X 10”
10
20 gpm
26284
SW-20-10BV
4.5” X 10”
20
20 gpm
26285
SW-25-10BV
4.5” X 10”
25
20 gpm
26286
SW-50-10BV
4.5” X 10”
50
20 gpm
26287
SW-1-20BV
4.5” X 20”
1
30 gpm
30 gpm
26288
SW-5-20BV
4.5” X 20”
5
26289
SW-10-20BV
4.5” X 20”
10
30 gpm
26292
SW-20-20BV
4.5” X 20”
20
30 gpm
26293
SW-25-20BV
4.5” X 20”
25
30 gpm
26294
SW-50-20BV
4.5” X 20”
50
30 gpm
Pleated Polyester Cartridge (PPC) Filter
The PCP cartridge filters are made from resin impregnated cellulose and
polyester fibers. They are constructed with thermally bonded media with
end caps and inner core heat sealed together.

Special formulation of resin-impregnated cellulose and polyester fibers

Provides higher wet strength than regular cellulose cartridges

High flow rate and high dirt-holding capacity

Wide variety of sizes and micron ranges available
Flow Rate vs Approximate Net Pressure Drop (PPC Filters)
40
PPC-20-20BV
35
Flow Rate (gpm)
30
25
PPC-5-20BV
20
PPC-20-10BV
15
PPC-5-10BV
10
PPC-5-20
PPC-1-20
PPC-5-10
PPC-20-20BV
5
0
1
1
1.2
1.4
1.6
1.8
2
2.2
Pressure Drop (psi)
2.4
2.6
2.8
3
Item #
Model #
Maximum Size
Micron
26174
PPC-1-10
2.5” X 10”
1
Flow Rate (gpm)
5 gpm
26175
PPC-5-10
2.5” X 10”
5
7 gpm
10 gpm
26176
PPC-1-20
2.5” X 20”
1
26177
PPC-5-20
2.5” X 20”
5
13 gpm
26178
PPC-5-10BV
4.5” X 10”
5
18 gpm
26179
PPC-20-10BV
4.5” X 10”
20
20 gpm
26180
PPC-5-20BV
4.5” X 20”
5
20 gpm
26181
PPC-20-20BV
4.5” X 20”
20
35 gpm
Material Information
End Cap Material - Polyurethane
Inner Core Material – Polypropylene
Filter Media – Polyester Fabric
Granular Activated (CGAC) Carbon Cartridge Filter
Item #
Model #
Maximum Size
Micron
Flow Rate (gpm)
1 gpm @ 7 psi drop
26185
CGACC-10
2.5" X 10"
7,500 gallons @ 1 gpm
26277
CGAC-10
2.5" X 10"
5,000 gallons @ 1.0 gpm
1 gpm @ 7 psi drop
26186
CGAC-20
2.5" X 20"
10,000 gallons @ 2.0 gpm
2 gpm @ 15 psi drop
26187
CGAC-BV
4.5" X 10"
12,500 gallons @ 2.0 gpm
2 gpm @ 5 psi drop
26188
CGAC-20BV
4.5" X 20"
25,000 gallons @ 4.0 gpm
4 gpm @ 5 psi drop
Material Information
End Cap Material – Polypropylene
Outer Casing – Polypropylene
Expansion Pad – Polypropylene
Gasket – PVC/Silicone
Filter Media – G
ranular Activated
Coal Based Carbon
NOTE: A drinking water cartridge may contain carbon fines (very fine black powder). After installation
and before using the water, follow the instructions
for flushing the cartridge to remove fines.
The CGAC cartridge filters are effective in reduction of chlorine and other bad taste
and odor from drinking water. CGACC cartridge filter contain coconut shell based
activated carbon which is environmentally friendly, and also effective in reducing
certain compounds* better than the coal based granular activated carbon filter
cartridges.
NOTE: It is recommended that you run the tap for
20 seconds prior to using the water for drinking or
cooking purposes
* Please check water treatment expert on which
granular activated carbon filter is right for your
application.

Effective taste/odor/ chlorine reduction

Designed for maximum adsorption

Post filter to reduce carbon fines
Item #
Material Information
End Cap Material - Polypropylene
Core - Polypropylene
Gasket – Silicone/PVC
Filter Media – Carbon Impregnated Cellulose
Netting – Polypropylene
Maximum Size
Micron
Capacity (Gallons)
Flow Rate (gpm)
26278
ICC-5-10
2.5" X 10"
5
2,500 gallons @ 1 gpm
5 gpm
26189
ICC-20-20BV
4.5" X 20"
20
7,500 gallons @ 4 gpm
10 gpm
The ICC cartridge filter has a dual benefit for sediment filtration
and reduction of chlorine and bad taste and odor from drinking
water. These carbon wrap sediment cartridges consist of polypropylene
melt blown cores with carbon impregnated outer layer wraps. It is an
economical solution for general water filtration requirements. This filter
has high dirt-loading capacity and is recommended for chlorinated water
supplies. These dual-purpose cartridges are well suited for residential
applications, and are great polishing filters for closed-loop water stream
systems. The netting and reinforced support provide extra strength.

Provides sediment filtration as well as taste/odor /
chlorine reduction

High dirt loading capacity

External netting for additional strength
Model #
Flow Rate vs Approximate Net Pressure Drop (ICC Filters)
3.0
2.5
ICC-5-10
2.0
Flow Rate (gpm)
Impregnated Carbon Cellulose (ICC)
Dual Purpose Filter
1.5
ICC-2020BV
1.0
0.5
0
1
1.000
2
2.000
3
3.000
Pressure Drop (psi)
4.000
4
55.000
NOTE: Some harmless bacteria will attack cellulose media cartridges. If your
cartridge seems to disintegrate, or has a musty or moldy odor, switch to a
synthetic media cartridge or consult the manufacturer.
NOTE: Increased flow rates may result in less effective chlorine reduction.
CAUTION: Recommended for chlorinated water supplies
2
Carbon Block (CB) Cartridge Filter
The CB cartridge filter is suitable for high capacity chlorine
and bad taste and odor reduction from drinking water. These
filters are also used for sediment filtration making them a great
choice for pre-filtering water for reverse osmosis applications.
They make an ideal choice for a wide range of residential, food
service, commercial and industrial applications.

High dirt-holding tolerance maximizes utilization of
the carbon block

High porosity maximizes utilization of the carbon block
Material Information
End Cap Material – Polypropylene
Gasket – PVC/Silicone
Filter Media – Acid Washed
Activated Carbon
(Coal or Coconut
Shell Based)
Netting – Polypropylene
Expansion Pad – Polypropylene
Item #
Model #
Maximum Size
Micron
Capacity (Gallons)
Flow Rate (gpm)
26192
CCB-1-10*
2.5" X 10"
1
10,000 gallons @ 1 gpm
1 gpm
26193
CCB-5-10*
2.5" X 10"
5
6,000 gallons @ 1 gpm
1 gpm
26194
CB-0.5-10
2.5" X 10"
0.5
20,000 gallons @ 1 gpm
1 gpm
26195
CB-5-10
2.5" X 10"
5
6,000 gallons @ 1 gpm
1 gpm
26196
CB-10-10
2.5" X 10"
10
3,000 gallons @ 1 gpm
1 gpm
26197
CB-0.5-20
2.5" X 20"
0.5
45,000 gallons @ 2 gpm
2 gpm
26198
CB-5-20
2.5" X 20"
5
12,000 gallons @ 2 gpm
2 gpm
26199
CB-10-20
2.5" X 20"
10
6,000 gallons @ 2gpm
2 gpm
26201
CB-0.5-10BV
4.5" X 10"
0.5
50,000 gallons @ 2 gpm
2 gpm
2 gpm
26202
CB-5-10BV
4.5" X 10"
5
22,000 gallons @ 2 gpm
26203
CB-10-10BV
4.5" X 10"
10
15,000 gallons @ 2gpm
2 gpm
26204
CB-0.5-20BV
4.5" X 20"
0.5
150,000 gallons @ 4gpm
4 gpm
26205
CB-5-20BV
4.5" X 20"
5
40,000 gallons @ 4 gpm
4 gpm
26206
CB-10-20BV
4.5" X 20"
10
30,000 gallons @ 4 gpm
4 gpm
NOTE: Cartridges will contain a very small amount of carbon fines (very fine black powder) and a new cartridge after installation should be flushed with sufficient water to remove all traces of the fines from your water system before using the
water. Each time you use your filtered water tap for drinking or cooking purposes it is recommended that you run (flush)
the tap for at least 20 seconds prior to using water.
*Contains coconut shell based activated carbon.
Radial Flow (RF) Granular Activated
Carbon Cartridge Filters
The RF cartridge filters are the solution for effective reduction of chlorine and bad taste and odor. These filters provide low pressure drop
and carbon fines released from the filter are much less compared to
the same size GAC style cartridge filter.
Item #
Model #
26253
RF-20
2.5' X 20"
N/A
6,000 gallons @ 2 gpm
4 gpm
26254
RF-10
2.5" X 10"
N/A
3,000 gallons @ 1 gpm
1 gpm
The granular activated carbon cartridges will contain a very small
amount of carbon fines (very fine black powder). After installation, a
new cartridge should be flushed with sufficient water to remove all
traces of the fines from your water system before using the water.
Each time you use your filtered water tap for drinking or cooking
purposes it is recommended that you run (flush) the tap for at least
20 seconds prior to using water. This is particularly important if the
water tap has not been used daily.
3
Micron
Capacity (Gallons)
Flow Rate (gpm)
26255
RF-10BV
4.5" X 10"
N/A
35,000 gallons @ 2 gpm
4 gpm
26256
RF-20BV
4.5" X 20"
N/A
70,000 gallons @ 4 gpm
8 gpm

Ideal for POE (whole house) and other high
flow rate applications

Unique design reduces carbon fines in
filtered water

Very low pressure drop
20
Flow Rate vs Approximate Net Pressure Drop (RF Filters)
18
RF-20BV
16
14
Flow Rate (gpm)
Material Information
Filter Media – Granular Activated Coal Based
Carbon
Outer Shell – Polypropylene
End Caps – Polypropylene
Gasket – PVC/Silicone
Core – Polypropylene
Maximum Size
12
10
RF-10BV
8
RF-20
6
4
RF-10
2
0
1
1
2
2
33
Pressure Drop (psi)
5
5
10
10
Dual Gradient (DG) Density Cartridge Filters
DG cartridge filters are made from 100% polypropylene. The progressively
loose media structure from inside to outside enhance cartridge performance in reduction of dirt, dust and other particles. The two separate
gradient layers of the filter enhances the performance so it achieves a
much higher dirt-loading capacity compared to similar size sediment
cartridge filters including spun and string-wound. They make an ideal
sediment reduction choice for a wide range of residential, food service,
commercial and industrial applications.

No fiber release and media migration

Designed for purity, bacteria and
chemical resistance

Two separate gradient density layers
enhance cartridge performance

Three times the dirt-holding capacity
versus other traditional sediment filters
Item #
Model #
Maximum Size
Micron
Flow Rate (gpm)
26207
DG-25-1-10BV
4.5" X 10"
25/1
10 gpm
26208
DG-50-5-10BV
4.5" X 10"
50/5
10 gpm
26209
DG-75-25-10BV
4.5" X 10"
75/25
10 gpm
26210
DG-25-1-20BVV
4.5" x 20"
25/1
20 gpm
26211
DG-50-5-20BV
4.5" X 20"
50/5
20 gpm
26212
DG-75-25-20BV
4.5" X 20"
75/25
20 gpm
Flow Rate vs Approximate Net Pressure Drop (DG Filters)
80
DG-75-25-20BV
70
DG-50-5-20BV
Flow Rate (gpm)
60
Material Information
Filter Media – Polypropylene
DG-25-1-20BVV
50
DG-75-25-10BV
40
30
DG-50-5-10BV
20
DG-25-1-10BV
10
0
0
0
1
1
2
2
3
3
4
4
5
5
66
Pressure Drop (psi)
Polypropylene Melt Blown (PPMB)
Filter Cartridges
The PPMB cartridge filters are made by thermally
bonding polypropylene microfibers for higher
filtration efficiency. The polypropylene material is
chemically resistant and not prone to bacterial
attack. They will also not add any taste, color
and odor to the water. They are available in wide
variety of sizes and micron ratings.

Constructed from high quality polypropylene filter media for higher
filtration efficiency

Thermally bonded micro-fiber construction for high strength

Available in micron ratings from 1 to 50 and lengths from 10”- 40”
Material Information
Filter Media – Polypropylene
Core – Polypropylene
Flow Rate vs Approximate Net Pressure Drop (PPMB Filters)
35
30
Flow Rate (gpm)
25
20
PPMB-20-20BV
PPMB-10-20BV
15
10
5
0
0.5
0.5
0.7
0.7
0.9
0.9
1.1
1.1
1.3
1.3
1.5
1.5
1.7
1.7
Pressure Drop (psi)
1.9
1.9
2.1
2.1
2.3
2.3
2.5
2.5
Item #
Model #
Maximum Size
Micron
Flow Rate (gpm)
26269
PPMB-5-10
2.5" X 10"
5
3 gpm
26223
PPMB-10-10
2.5" X 10"
10
4 gpm
26224
PPMB-25-10
2.5" X 10"
25
5 gpm
26225
PPMB-50-10
2.5" X 10"
50
8 gpm
26226
PPMB-1-20
2.5" X 20"
1
4 gpm
26227
PPMB-5-20
2.5" X 20"
5
7 gpm
26228
PPMB-10-20
2.5" X 20"
10
9 gpm
26229
PPMB-25-20
2.5" X 20"
25
11 gpm
26230
PPMB-50-20
2.5" X 20"
50
15 gpm
26231
PPMB-1-40
2.5" X 40"
1
8 gpm
26232
PPMB-5-40
2.5" X 40"
5
14 gpm
26233
PPMB-20-40
2.5" X 40"
20
20 gpm
26234
PPMB-1-10BV
4.5" X 10"
1
6 gpm
26235
PPMB-5-10BV
4.5" X 10"
5
10 gpm
26236
PPMB-10-10BV
4.5" X 10"
10
11 gpm
26237
PPMB-20-10BV
4.5" X 10"
20
14 gpm
26238
PPMB-1-20BV
4.5" X 20"
1
12 gpm
26239
PPMB-5-20BV
4.5" X 20"
5
20 gpm
26240
PPMB-10-20BV
4.5" X 20"
10
20 gpm
26241
PPMB-20-20BV
4.5" X 20"
20
20 gpm
PPMB-5-10
PPMB-10-10
PPMB-25-10
PPMB-50-10
PPMB-1-20
PPMB-5-20
PPMB-10-20
PPMB-25-20
PPMB-50-20
PPMB-1-40
PPMB-5-40
PPMB-20-40
PPMB-1-10BV
PPMB-5-10BV
PPMB-10-10BV
PPMB-20-10BV
PPMB-1-20BV
PPMB-5-20BV
4
PR cartridge filters are made from reusable
polyester fibers which are pleated to maximize
dirt holding capacity. These cartridge filters are
multipurpose.

Pleated design maximizes dirt-holding
capacity

Durable, versatile and reusable

Polyester media is bacteria and
chemical resistant

Nominal 30-micron rating and nominal
50-micron rating
Item #
Model #
Maximum Size
Micron
Capacity (Gallons)
Flow Rate (gpm)
26242
PR-30-10BV
4.5" X 10"
30
24,000 @ 10.0 gpm
10 gpm
26243
PR-50-10BV
4.5" X 10"
50
24,000 @ 10.0 gpm
10 gpm
26244
PR-30-20BV
4.5" X 20"
30
48,000 @ 10.0 gpm
20 gpm
45

Pleated design maximizes
dirt-holding capacity

Designed for general water
filtration purposes

Nominal 20-micron rating

Cellulose based material
Material Information
End Cap Material - Polyurethane
Inner Core Material – Polypropylene
Filter Media –Cellulose paper
30
20
0
Material Information
Filter Media – Polypropylene
2
3
Pressure Drop (psi)
Model #
Maximum Size
Micron
Flow Rate (gpm)
10 gpm
26276
PC-20-10
2.5” X 10”
20
26182
PC-20-20
2.5” X 20”
20
15 gpm
26183
PC-20-10BV
4.5” X 10”
20
20 gpm
26184
PC-20-20BV
4.5” X 20”
20
35 gpm
Flow Rate vs Approximate Net Pressure Drop (PC Filters)
40
PC-20-20BV
35
30
25
20
PC-20-10BV
15
PC-20-20
10
PC-20-10
5
1
1.2
1.4
1.6
1.8
2
2.2
Pressure Drop (psi)
2.4
2.6
2.8
Model #
Maximum Size
Micron
Flow Rate (gpm)
4 gpm
26213
SPB-1-10
2.5" X 10"
1
26222
SPB-5-10
2.5" X 10"
5
5 gpm
26221
SPB-5-20
2.5" X 20"
5
10 gpm
20
Flow Rate vs Approximate Net Pressure Drop (SPB Filters)
18
SPB-5-20
16
14
12
10
8
SPB-5-10
6
SPB-1-10
4
2
0
5
3
Item #
Flow Rate (gpm)

Use on chlorinated or non-chlorinated supplies.

Designed for purity, bacteria and chemical resistance

Spun fibers form a true gradient

Density from outer to inner surfaces
1
Item #
0
The SPB filters are manufactured from 100% polypropylene
which is resistant to chemicals and less prone to bacterial
attack. They do not impart any taste and odor to
the water.
PR-30-10BV
15
5
CAUTION: To be used only for chlorinated water
supplies. Cellulose based material is subject to
bacteria attack in well water applications.
Spun Poly Bonded (SPB) Cartridge Filters
PR-50-10BV
25
10
Flow Rate (gpm)
The PC cartridge filters are made from pleated cellulose media and are
recommended for general water filtration requirements.
PR-30-20BV
35
Material Information
Filter Media – Polypropylene
End Caps – Polyurethane
Core – Polyurethane
Pleated Cellulose (PC) Filter Cartridges
Flow Rate vs Approximate Net Pressure Drop (PR Filters)
40
Flow Rate (gpm)
Pleated Polyester Reusable (PR)
Cartridge Filter
1
2
3
Pressure Drop (psi)
5
Aquaflo Cartridge Selection Guidelines***
Scale
and
Rust
Particles
Model #
Coarse
Sand
Sand/
Dirt/
Silt
Fine
Dirt/
Silt/
Sand
Extra Fine
Dirt/Silt/
Sand
Bad
Taste
&
Odor
Aesthetic
Chlorine:
Taste &
Odor
Model #
Scale
and
Rust
Particles
Pleated Polyester Cartridge (PPC) Filter
PPC-1-10,
PPC-5-20BV



PPC-20-10BV



PPC-20-20BV




PC-20-10,
PC-20-20BV



DG-75-25-10BV,
DG-75-25-20BV




SPB-1-10,
SPB-5-20

Pleated Polyster Reusable (PR) Cartridge Filter

Radial Flow (RF) Granular Activated Carbon Cartridge Filter
RF-20, RF-20BV


Impregnated Carbon Cellulose (ICC) Dual Purpose Filter (*) (‡)



ICC-20-20BV









Impregnated Carbon Polyester (ICP) Dual Purpose Filter (‡)
ICP-10-10



ICP-10-20BV



Aesthetic
Chlorine:
Taste &
Odor











Polypropylene Melt Blown (PPMB) Filter Cartridge

ICC-5-10
Bad
Taste
&
Odor
Spun Poly Bonded (SPB) Cartrudge Filter

CCB-1-10,
CB-10-20BV


CGACC-10,
CGAC-20BV
Carbon Block (CB) Cartridge Filter (†)
PR-30-10BV,
PR-30-20BV
Extra Fine
Dirt/Silt/
Sand
Granular Activated Carbon (GAC) Cartridge Filter (††)
Dual Gradient (DG) Density Cartridge Filter

Fine
Dirt/
Silt/
Sand
Pleated Celluloe (PC) Cartridge Filter*
**
DG-25-1-10BV,
DG-50-5-20BV
Coarse
Sand
Sand/
Dirt/
Silt




PPMB-5-10,
PPMB-5-20BV




PPMB-10-10,
PPMB-10-20BV




PPMB-25-10



PPMB-50-10


PPMB-25-20


PPMB-50-20


PPMB-20-40



PPMB-20-10BV



PPMB-20-20BV



WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without
adequate disinfection before or after the system.
NOTEs: P erformance capacity depends on system design, flow rate and certain other application conditions. Certain states require system registration or certification for health-related reduction claims.
Filter cartridge life varies depending on usage and water conditions.
T he smaller the micron rating, the smaller the size particle the cartridge will filter. For comparison
purposes, the human hair has a diameter of approximately 70 microns. Particles smaller than 40
microns are not visible with the human eye.

String Wound (SW) Cartridge Filter
Operating Temperature: 39° F to 122° F (4° C to 50° C)
Operating Pressure: 0 to 125 psi (0 to 861 kPa)
The manufacturer reserves the right to make product improvements which may deviate from the specifications and descriptions stated herein, without obligation to change previously manufactured products or to
note the change.
SW-5-10,
SW-5-20


SW-30-10,
SW-30-10





*CAUTION: To be used only for chlorinated water supplies. Cellulose based material is subject to
bacteria attack in well water applications.
** Three times the dirt-holding capacity than other traditional sediment filters.
***Refer to flow rate and capacity information of cartridge filters in their respective sections of this
document
‡ May plug quickly in areas of high sediment. Low capacity.
† High capacity, require pre-sediment filtered water.
†† High carbon removal capacity and tolerant to high sediment water. Customers will notice some
carbon fines during initial service.
Impregnated Carbon Polyester (ICP) Dual Purpose Filter
The ICDP cartridge filter has a dual benefit for sediment filtration and
reduction of chlorine and bad taste and odor from drinking water. These
carbon wrap sediment cartridges consist of polypropylene melt blown
cores with carbon impregnated outer layer wraps. It is an economical solution for general water filtration requirements. This filter is recommended
for chlorinated water supplies. These dual-purpose cartridges are well
suited for residential applications and are great polishing filters for closedloop water stream systems.


Provides sediment filtration as well
as taste/odor/chlorine reduction

High dirt loading capacity

External netting for additional
strength
Item #
Model #
Maximum Size
Micron
Capacity (Gallons)
Flow Rate (gpm)
26190
ICP-10-10
2.5" X 10"
5
2,500 gallons @ 1 gpm
5 gpm
26191
ICP-10-20BV
4.5" X 20"
20
7,500 gallons @ 4 gpm
10 gpm
Material Information
End Cap Material - Polypropylene
Core - Polypropylene
Gasket – Silicon/PVC
Filter Media – Carbon
Impregnated Polyester
Netting - Polypropylene
6
housings
Our newly added high-quality, value-priced filter housings are the perfect complement to your Aqua Flo cartridges. We spent over a year optimizing the design
so it had the right features and a rugged design.
Big Value Filter Housing Features
•Durable reinforced polypropylene construction
•Every housing comes with a mounting
bracket, hardware and wrench
•Pressure relief button to reduce the pressure
in the housing when changing the cartridge.
• Economical
•Available in variety of sizes and port
connections.
Filter Cartridges
Sold Separately
Big Value Housings
Clear Housing (Stainless Steel Threads) Features
•Stainless Steel Inserts in Inlet/Outlet ports to
reduce the possibility of cross threading and
allow a tighter pipe fit.
•Three position valve-in-head (Model #
WVIH34SS): Filter (allows water to be
treated), Bypass (allows water to bypass the
filter during filter replacements), Off (shuts off
the water to the filter)
•Clear sump for easy on-site examination of
system operation and cartridge performance
Clear Filter Housings
•Pressure relief button to reduce the pressure
in the housing when changing the cartridge
(for WCT34SS model).
•Durable Styrene-Acrilonitrile and reinforced
polypropylene construction
•Every housing comes with a mounting
bracket, hardware and wrench
• Economical
• Display packaging
Filter Cartridges Sold Separately
See the Aqua Flo Housing Brochure
#57452 for our full housing line-up or
go to www.watergroup.com for
complete information.
Aqua Flo Housing Specifications
Max. Water Temperature: 30° C (100˚ F)
Min. Water Temperature: 2° C (35˚ F)
Max. Water Pressure: 100 psi (689 kPa)
Housing Material: Reinforced Polypropylene
(cap and blue sump ) & Styrene-Acrilonitrile
(clear sump)
Housing O-Ring Material: EPDM
Pressure Relief Button: Nylon
The pressure drop will not exceed 2 psi at
15 gpm flow rate for 20” Big Value Housings
and 1 psi at 15 gpm flow rate on other
standard housings
Limited One Year Warranty
WARNING:
Do not use on drinking water supplies which are microbiologically
unsafe or of unknown quality without first adequately
disinfecting the water. Protect against freezing to prevent cracking
of the filter and water leakage.
SOLD BY:
NOTE:
All dimensions and micron ratings are nominal. The manufacturer
reserves the right to make product improvements which may deviate from the specifications and descriptions stated herein, without
obligation to change previously manufactured products or to note
the change.
We recommended replacing the clear sump every 5 years.
Do not subject to freezing temperatures.
P lease refer to the owner’s guide on filter
recommendation chart based on your water analysis
Superior Structural Integrity
1. Hydrostatic pressure; tested for 300 psi for 15 minutes
with no leaks
2 .Burst test pressure; exceeded 400 psi with no leaks
3. Fatigue cycle; tested for 100,000 cycles for 0-150 psi
(5 seconds ON/OFF) with no leaks
WATERGROUP INC. WATERGROUP COMPANIES INC.
FRIDLEY, MN
CAMBRIDGE, ON
1-877-581-18331-877-288-9888
www.watergroup.com
57472.0713
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement