null  null
v.26.february.2016
SAFETY INSTRUCTIONS
1. IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions;
2) Keep these instructions;
3) Heed all warnings;
4) Follow all instructions;
5) Do not use this apparatus near water;
6) Clean only with dry cloth;
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions;
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat;
9) Do not defeat the safety purpose of the polarized or ground-type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet;
10) Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus;
11) Only use attachments/accessories specified by the manufacturer;
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from the tip-over (and Fig 21
DU Tipping Cart Symbol).
13) Unplug this apparatus during lightning storms or when unused for long periods of time;
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped;
15) “Warning: to reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture; and objects filled with
liquids, such as vases, should not be placed on this apparatus”;
16) To completely disconnect this apparatus from the AC mains, disconnect the power supply cord plug fron the AC receptacle;
17) The mains plug of the power supply cord shall reamin readily accessible.
18) In case of voltage selector make sure the switch on the rear panel is on the correct voltage before connecting it to the AC
power, and the fuse is the right value for that voltage (This selector is not available on the 100V version).
Please change the voltage/fuse values label located near the voltage selector matching the voltage/fuse values when you
need to change the voltage of the apparatus.
19) “WARNING: this apparatus must be securely attached to the floor or wall in accordance with installation istruction. Tipping,
shaking, or rocking the machine may cause injury or death.”
1. PRÉCAUTIONS D’EMPLOI
1) Lire ces instructions;
2) Conserver ces instructions;
3) Suivre tous les conseils d’utilisations;
4) Suivre toutes les instructions;
5) Ne pas utiliser cet appareil au bord de l’eau;
6) Nettoyer uniquement avec un chiffon humide;
7) Ne pas bloquer le système de ventilation. Installer conformément aux instructions du fabricant;
8) Ne pas installer l’appareil près d’une source de chaleur tel qu’un radiateur, un fourneau, ou bien un autre appareil qui produit de
la chaleur;
9) Ne pas modifier le système de sécurité de la fiche polarisée ou de de la fiche pour les prises de terre. Une fiche polarisée a deux
broches, l’une étant plus distante de l’autre. Une fiche pour prise de terre a deux broches et une pointe pour la masse.
La broche plus distante et la pointe pour la masse ont été installées pour votre sécurité. Si la fiche fournie de rentre pas dans votre
prise de courant consulter un électricien pour la substitution;
10)Protéger le cordon d’alimentation afin qu’il ne soit pas piétiné ou écrasé tout particulièrement au niveau des fiches, des prises de
courant femelles, et des parties qui sortent de l’appareil;
11)Utiliser uniquement les accessoires recommendés par le fabricant;
12)Utilisez uniquement avec le chariot, le socle, le trépied, le support ou la table spécifiés par le fabricant ou vendu avec l’appareil.
Lorsque vous utilisez un chariot, soyez prudent lorsque vous déplacez l’ensemble chariot / appareil pour éviter toute blessure du
renversement (et la figure 21 DU Tipping panier Symbol).
13)Ne pas branché l’appareil en cas d’orage accompagné d’éclairs. Le débrancher en cas de non utilisation prolongée;
14)S’adresser à un service assistance agréé si l’appareil a subi des dommages, si le cordon d’alimentation ou la fiche a été
endommagé, si un liquide a été renversé sur l’appareil ou bien si un object est tombé dans l’appareil, si ce dernier a été exposé à
la pluie ou à l’humidité, s’il ne fonctionne pas correctement ou s’il est tombé;
15)“Avertissant: pour réduire le risque du feu ou de décharge électrique, n’exposez pas cet appareil à la pluie ou l’humidité et les
objets remplis de liquides; tels que des vases, ne devraient pas être placés sur cet appareil”;
16)Pour déconnecter totalement cet appareil du secteur, débranchez la cordon d’alimentation fiche de la prise secteur;
17)La prise de courant doit être facilement accessible.
18)En cas de sélecteur de tension s’assurer que l’interrupteur sur le panneau arrière est sur la
​​ bonne tension avant de le raccorder à
l’alimentation secteur et le fusible est la bonne valeur pour que la tension (Ce sélecteur n’est pas disponible sur la version 100V).
S’il vous plaît changer la tension / valeurs de fusibles étiquette située près du sélecteur de tension correspondant aux valeurs /
fusibles de tension lorsque vous avez besoin de changer la tension de l’appareil.
19)“AVERTISSEMENT: cet appareil doit être assujetti au plancher ou au mur conformément aux instructions d’installation.
Le fait de l’incliner, de le balancer ou de l’agiter peut causer des blessures ou la mort.”
MORE INFORMATION
For warranty and service information, please contact your local DV Mark distributor (contact information available at www.dvmark.it). For more technical information, please visit us at www.dvmark.it and fill out the form on the Contact Us page. We
hope you enjoy your amplifier and use it to make great music!
2
“The Lightning Flash with arrowhead symbol
within an equilateral triangle, is intended
to alert the user to the presence of uninsulated
“dangerous voltage” within the product enclosure
that may be of suf�icient magnitude to constitute
a risk of shock to persons.”
“The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.”
“To be used only
with altitude
not exceeding 2000 m”
“To be used only
where the climate
is not tropical”
A Word from Marco De Virgiliis
MARK VISION
Thank you for choosing the DV Little Jazz / DV Jazz 12 / DV Jazz 212 combo.
Jazz guitarists are well aware that creating a great jazz tone requires not only the right guitar but also the right amplifier.
The DV Little Jazz / DV Jazz 12 / DV Jazz 212 combos have been designed with a jazz guitar in mind.
Lots of attractive features which make them a new standard for jazz guitarists and everyone in need of a small, ultra-compact, very-portable combo with a clean,
warm, powerful sound!
These amps also feature a Dual Voltage Switch 120V/240V (not available on the 100V version manufactured for Japan) to use the amp in countries with
different voltages, without having to carry an external voltage converter!
We hope you will enjoy your new guitar amp, and we invite you to contact us any time with your comments and questions, at [email protected]
Thanks again, and good music!
Marco De Virgiliis
3
FRONT PANEL
1) INPUT Connect your guitar to this input using a standard ¼” shielded instrument cable.
2) MASTER Start with the Master control OFF (all the way counter-clockwise) and turn it up gradually until you reach your deidered volume.
3) BASS This knob controls the amount of low frequencies in your sound.
7
1
2
6
4) MID The Middle control regulates the midrange frequencies and it is an
important part of your tone shaping.
5) HIGH The High knob controls the amount of high frequencies in your
sound.
6) REVERB Level control for the onboard reverb. This amp features a last
generation of digital reverb, it’s sweet-sounding, warm and natural.
7) AUX Use this input to plug in an iPod, CD or MP3 player using a mini
plug 1/8”. This signal mixes in evenly with your instrument input.
4
3
4
5
REAR PANEL
8) AC POWER SOCKET Make sure the unit is grounded; all three terminals of the AC power plug must be connected to avoid any injury to the user
4
3
5
or damage to the unit.
DV Mark DV Little Jazz / DV Jazz 12 / DV Jazz 212 combos feature a 120V/240V Voltage Selector to use the amp in countries with different
voltages, so make sure the switch on the rear panel is on the correct voltage before
connecting it to the AC power, and the fuse is the right value for that voltage.
9) ON/OFF SWITCH This switch delivers AC power to the amp. The DV Mark DV Little Jazz /
DV Jazz 12 / DV Jazz 212 combos feature a 120V/240V Voltage Selector (not available on the
100V version manufactured for Japan) to use the amp in countries with different voltages, so
make sure the switch on the rear panel (18) is on the correct voltage before connecting it to the
AC power, and the fuse has the right value for that voltage.
11
0
12
10) VOLTAGE SELECTOR The DV Mark DV Little Jazz / DV Jazz 12 / DV Jazz 212 combos feature a 120V/240V Voltage Selector (not available on the 100V version manufactured for 10
12
13
0
24
Japan) to use the amp in countries with different voltages, so make sure the switch on the rear
panel is on the correct voltage before connecting it to the AC power.
14
9
Please change the voltage/fuse values label located near the voltage selector matching the
15
voltage/fuse values when you need to change the voltage of the apparatus.
11) LINE OUT This balanced XLR output sends a balanced signal to the mixing console or snake 8
in live and studio situations. The Line Out signal is post-EQ and post-reverb.
12) GROUND LIFT Occasionally, when you’re playing live and using the Line Out (10), the
soundman will detect a hum from your amp’s signal. This is often due to a ground problem related to your power source; You will likely eliminate this
hum simply flipping the Ground Lift switch.
13) INTERNAL SPEAKER ON/OFF This switch turns off the speaker when using headphones so you can practice anywhere and anytime you like.
14) SPEAKER OUT Use this output to connect an 8 ohm extension cabinet, giving you a louder rig.
15) PHONES For quiet practing plug headphones into this mini plug 1/8” input, turning OFF the internal speaker switch (12).
5
TECHNICAL SPECS
Channels: One
Controls: Gain - Master - Reverb
EQ Controls: Low - Mid - High
Speaker Outputs: One ¼” Jack mono out 8 ohm
Power Output: 60W @ 4ohm,
45W @ 8ohm
Other Features: Onboard reverb
Dual Voltage selector 120V/240V (not available on the 100V version manufactured for Japan)
Dimensions: 270 x 280 x 270 mm / 10.63” x 11.02” x 10.63” (DV Little Jazz)
440 x 430 x 306 mm / 17.32” x 16.93” x 12.05” (DV Jazz 12)
440 x 700 x 306 mm / 17.32” x 27.56” x 12.05” (DV Jazz 212)
Weight: 6,9 kg / 15.21 lbs (DV Little Jazz)
8,6 kg / 18.96 lbs (DV Jazz 12)
11,6 kg / 25.57 lbs (DV Jazz 212)
BLOCK DIAGRAM
LINE OUT
BUFFER
LEVEL
EQ
REVERB
LIMITER
POWER
AMP
SPEAKER
ON/OFF
SPEAKER OUT
PHONES OUT
POWER REQUIREMENT: 100V; 120V; 230V; 240V - 50/60Hz
12
NOTE
15
Product specifications are subject to change without notice
www.markbass.it
www.momark.it
www.markaudio.it
srl
Italy - 66020 San Giovanni Teatino CH - Via Po, 52
Tel: +39 0854407764 / 0854465705 - Fax: +39 0854407764 / 0854407399 - www.dvmark.it - [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement