Switching Thyristors Sxx08xSx and Sxx08x Datasheet

Switching Thyristors Sxx08xSx and Sxx08x Datasheet
Teccor® brand Thyristors
8 Amp Sensitive & Standard SCRs
Sxx08xSx & Sxx08x Series
RoHS ®
Description
Excellent unidirectional switches for phase control
applications such as heating and motor speed controls.
Sensitive gate SCRs are easily triggered with microAmps
of current as furnished by sense coils, proximity switches,
and microprocessors.
Standard phase control SCRs are triggered with few
milliamperes of current at less than 1.5V potential.
Features & Benefits
• RoHS compliant
• Glass – passivated
junctions
Agency Approval
Agency
L Package: E71639
Typical applications are capacitive discharge systems for
strobe lights, nailers, staplers and gas engine ignition. Also
controls for power tools, home/brown goods and white
goods appliances.
Main Features
Symbol
Value
Unit
8
A
400 to 1000
V
0.2 to 15
mA
IT(RMS)
VDRM /VRRM
IGT
• Surge capability up
to 100 A
Applications
Agency File Number
®
• Voltage capability up
to 1000 V
Internally constructed isolated packages are offered for
ease of heat sinking with highest isolation voltage.
Schematic Symbol
A
K
Additional Information
G
Datasheet
Resources
Samples
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
Teccor® brand Thyristors
8 Amp Sensitive & Standard SCRs
Absolute Maximum Ratings — Sensitive SCRs
Symbol
Parameter
IT(RMS)
IT(AV)
Test Conditions
Sxx08LSy
TC = 80°C
RMS on-state current
Sxx08RSy
Sxx08DSy
Sxx08VSy
TC = 95°C
Sxx08LSy
TC = 80°C
Average on-state current
Sxx08RSy
Sxx08DSy
Sxx08VSy
TC = 95°C
Value
Unit
8
A
5.1
A
single half cycle; f = 50Hz;
TJ (initial) = 25°C
83
single half cycle; f = 60Hz;
TJ (initial) = 25°C
100
ITSM
Peak non-repetitive surge current
I2t
I2t Value for fusing
tp = 8.3 ms
41
A2s
Critical rate of rise of on-state current
f = 60 Hz ; TJ = 110°C
70
A/μs
IGTM
Peak gate current
TJ = 110°C
1.6
A
PG(AV)
Average gate power dissipation
TJ = 110°C
0.4
W
Storage temperature range
-40 to 150
°C
Operating junction temperature range
-40 to 110
°C
Value
Unit
8
A
5.1
A
di/dt
Tstg
TJ
A
Note: xx = voltage, y = sensitivity
Absolute Maximum Ratings — Standard SCRs
Symbol
IT(RMS)
IT(AV)
Parameter
Test Conditions
Sxx08L
TC = 100°C
RMS on-state current
Sxx08R
Sxx08D
Sxx08V
TC = 110°C
Sxx08L
TC = 100°C
Average on-state current
Sxx08R
Sxx08D
Sxx08V
TC = 110°C
single half cycle; f = 50Hz;
TJ (initial) = 25°C
83
single half cycle; f = 60Hz;
TJ (initial) = 25°C
100
ITSM
Peak non-repetitive surge current
I2t
I2t Value for fusing
tp = 8.3 ms
41
A2s
Critical rate-of-rise of on-state current
f = 60 Hz TJ = 125°C
100
A/μs
Peak gate current
TJ = 125°C
2
A
Average gate power dissipation
TJ = 125°C
di/dt
IGM
PG(AV)
Tstg
TJ
A
0.5
W
Storage temperature range
-40 to 150
°C
Operating junction temperature range
-40 to 125
°C
Note: xx = voltage
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
Teccor® brand Thyristors
8 Amp Sensitive & Standard SCRs
Electrical Characteristics (TJ = 25°C, unless otherwise specified) – Sensitive SCRs
Symbol
IGT
VGT
Value
Test Conditions
Sxx08xS2
MAX.
VD = 6V RL = 100 Ω
Sxx08xS3
200
500
Unit
μA
MAX.
0.8
V
dv/dt
VD = VDRM; RGK = 1kΩ; TJ = 110°C
TYP.
8
V/μs
VGD
VD = VDRM RL = 3.3 kΩ TJ = 110°C
MIN.
0.2
V
VGRM
IGR = 10μA
MIN.
6
IH
IT = 20mA (initial)
MAX.
6
8
tq
IT=2A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs
MAX.
50
45
μs
tgt
IG = 2 x IGT PW = 15µs IT = 12A
TYP.
4
5
μs
V
mA
Note: xx = voltage x = package
Electrical Characteristics (TJ = 25°C, unless otherwise specified) – Standard SCRs
Symbol
IGT
VGT
Test Conditions
MAX.
VD = 12V RL = 60 Ω
MAX.
VD = VDRM; gate open; TJ = 100°C
dv/dt
1.5
350
600V
300
800V
250
MIN.
100
400V
250
600V
225
800V
Unit
mA
V
400V
1000V
VD = VDRM; gate open; TJ = 125°C
Value
Sxx08x
15
V/μs
200
VGD
VD = VDRM RL = 3.3 kΩ TJ = 125°C
MIN.
0.2
V
IH
IT = 200mA (initial)
MAX.
30
mA
tq
IT=2A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs
MAX.
35
μs
tgt
IG = 2 x IGT PW = 15µs IT = 16A
TYP.
2
μs
Note: xx = voltage x = package
Static Characteristics
Symbol
Test Conditions
IT = 16A; tp = 380 µs
VTM
Sxx08xyy
IDRM / IRRM
Sxx08x
Unit
1.6
V
TJ = 25°C
400 - 600V
5
TJ = 110°C
400 - 600V
250
400 - 800V
10
TJ = 25°C
VDRM = VRRM
MAX.
Value
TJ = 100°C
TJ = 125°C
1000V
MAX.
20
400 - 800V
200
1000V
3000
400 - 800V
500
μA
Note: xx = voltage, x = package, yy = sensitivity
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
Teccor® brand Thyristors
8 Amp Sensitive & Standard SCRs
Thermal Resistances
Symbol
Parameter
Value
Junction to case (AC)
Rθ(J-C)
Junction to ambient
Rθ(J-A)
Sxx08RSy
1.8
Sxx08LSy
3.4
Sxx08VSy
2.1
Sxx08DSy
1.5
Sxx08R
1.8
Sxx08L
3.4
Sxx08V
2.0
Sxx08D
1.5
Sxx08RSy
40
Sxx08LSy
65
Sxx08VSy
85
Sxx08R
40
Sxx08L
50
Sxx08V
70
Unit
°C/W
°C/W
Note: xx = voltage, y = sensitivity
Figure 1: Normalized DC Gate Trigger Current
vs. Junction Temperature (Sensitive SCR)
Figure 2: Normalized DC Gate Trigger Current
vs. Junction Temperature (Standard SCR)
4.0
Ratio of IGT / IGT (TJ = 25°C)
Ratio of IGT / IGT (TJ = 25°C)
4.0
3.0
2.0
1.0
0.0
3.0
2.0
1.0
0.0
-40
-15
10
35
60
Junction Temperature (TJ) - (°C)
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
85
110
-40
-15
10
35
60
Junction Temperature (TJ) - (°C)
85
110
125
Teccor® brand Thyristors
8 Amp Sensitive & Standard SCRs
Figure 3: Normalized DC Gate Trigger Voltage
vs. Junction Temperature
Figure 4: Normalized DC Holding Current
vs. Junction Temperature
2.0
Ratio of IH / IH (TJ = 25°C)
Ratio of VGT / VGT (TJ = 25°C)
2.0
1.5
1.0
0.5
1.5
1.0
0.5
0.0
0.0
-40
-15
10
35
60
85
110
-40
125
-15
10
60
85
110
125
Figure 6: P
ower Dissipation (Typical)
vs. RMS On-State Current
8
32
TJ = 25°C
28
Average On-State Power Dissipation
[PD(AV)] -- (Watts)
Instantaneous On-state Current (iT) – Amps
Figure 5: On-State Current
vs. On-State Voltage (Typical)
24
20
16
12
8
4
7
6
5
4
3
2
1
0
0
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
0
1.6
1
2
Instantaneous On-state Voltage (vT) – Volts
3
4
5
6
7
8
RMS On-State Current [IT(RMS)] - (Amps)
Figure 7: Maximum Allowable Case Temperature
vs. RMS On-State Current
Figure 8: M
aximum Allowable Case Temperature
vs. Average On-State Current
130
130
120
Maximum Allowable Case Temperature
(TC) - °C
Sxx08R
Sxx08D
Sxx08V
125
Maximum Allowable Case
Temperature (TC) - °C
35
Junction Temperature (TJ) - (°C)
Junction Temperature (TJ) - (°C)
Sxx08RSy
Sxx08DSy
Sxx08VSy
115
110
Sxx08L
105
100
95
Sxx08LSy
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
Conduction Angle: 180°
FREE AIR RATING
90
85
80
0
1
2
3
4
5
6
RMS On-State Current [IT(RMS)] - Amps
7
8
9
Sxx08R
Sxx08D
Sxx08V
125
120
Sxx08RSy
Sxx08DSy
Sxx08VSy
115
110
Sxx08L
105
100
95
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
Conduction Angle: 180°
FREE AIR RATING
90
85
80
0
1
2
Sx08LSy
3
4
5
Average On-State Current [IT(AVE)] - Amps
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
Teccor® brand Thyristors
8 Amp Sensitive & Standard SCRs
Figure 9: Maximum Allowable Ambient Temperature
vs. RMS On-State Current
120
Maximum Allowable Ambient Temperature
(TA) - °C
Maximum Allowable Ambient Temperature
(TA) - °C
120
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
Sxx08R
100
80
60
Sxx08V
40
Sxx08VSy
20
0
0.0
0.5
1.0
1.5
2.0
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
Sxx08R
100
Sxx08L
Sxx08RSy
Sxx08LSy
Figure 10: Maximum Allowable Ambient Temperature
vs. Average On-State Current
Sxx08L
80
Sxx08V
Sxx08RSy
60 Sxx08LSy
40
Sxx08VSy
20
0
2.5
0.0
0.5
1.0
1.5
Average On-State Current [IT(AVE)] - Amps
RMS On-State Current [IT(RMS)] - Amps
Note: xx = voltage, y = sensitivity
Figure 11: Peak Capacitor Discharge Current
Figure 12: P
eak Capacitor Discharge Current Derating
1.2
1000
Normalized Peak Current
Peak Discharge
Current (ITM) - Amps
1.0
100
ITRM
0.8
0.6
0.4
Sensitive SCR
Standard SCR
0.2
tW
10
1.0
0.5
10 .0
50.0
0.0
Pulse Current Duration (tw) - ms
0
25
50
75
100
125
Case Temperature (TC) - °C
Figure 13: S
urge Peak On-State Current vs. Number of Cycles
Peak Surge (Non-repetitive)On-state
Current (ITSM) – Amps
100
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated
Value at Specified Case Temperature
Notes:
1. G
ate control may be lost during and immediately
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state
rated value.
10
1
1
10
100
Surge Current Duration -- Full Cycles
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
1000
150
Teccor® brand Thyristors
8 Amp Sensitive & Standard SCRs
Soldering Parameters
Pb – Free assembly
Pre Heat
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
60 – 180 secs
Average ramp up rate (Liquidus Temp)
(TL) to peak
5°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
280°C
Physical Specifications
Terminal Finish
100% Matte Tin-plated
Body Material
UL recognized epoxy meeting flammability
classification 94V-0
Lead Material
Copper Alloy
tP
TP
Temperature
Reflow Condition
Ramp-up
TL
tL
TS(max)
Preheat
TS(min)
25
Ramp-do
Ramp-down
tS
time to peak temperature
Time
Environmental Specifications
Test
AC Blocking
Temperature Cycling
Temperature/
Humidity
Design Considerations
High Temp Storage
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of the Thyristor. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
Low-Temp Storage
Thermal Shock
Autoclave
Specifications and Conditions
MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 125°C for 1008 hours
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C; 15-min
dwell-time
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C; 85%
rel humidity
MIL-STD-750, M-1031,
1008 hours; 150°C
1008 hours; -40°C
MIL-STD-750, M-1056
10 cycles; 0°C to 100°C; 5-min dwelltime at each temperature; 10 sec (max)
transfer time between temperature
EIA / JEDEC, JESD22-A102
168 hours (121°C at 2 ATMs) and
100% R/H
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability
ANSI/J-STD-002, category 3, Test A
Lead Bend
MIL-STD-750, M-2036 Cond E
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
Teccor® brand Thyristors
8 Amp Sensitive & Standard SCRs
Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead
TC MEASURING POINT
AREA (REF.) 0.17 IN2
O
A
E
Dimension
8.13
.320
P
ANODE
B
C
13.36
.526
D
7.01
.276
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
F
R
G
L
H
CATHODE
ANODE GATE
K
N
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
M
J
Inches
Millimeters
Min
Max
Min
Max
A
0.380
0.420
9.65
10.67
B
0.105
0.115
2.67
2.92
C
0.230
0.250
5.84
6.35
D
0.590
0.620
14.99
15.75
E
0.142
0.147
3.61
3.73
F
0.110
0.130
2.79
3.30
G
0.540
0.575
13.72
14.61
H
0.025
0.035
0.64
0.89
J
0.195
0.205
4.95
5.21
K
0.095
0.105
2.41
2.67
L
0.060
0.075
1.52
1.91
M
0.085
0.095
2.16
2.41
N
0.018
0.024
0.46
0.61
O
0.178
0.188
4.52
4.78
P
0.045
0.060
1.14
1.52
R
0.038
0.048
0.97
1.22
Min
Max
Min
Max
Dimensions — TO-220AB (L-Package) — Isolated Mounting Tab
TC MEASURING POINT
O
A
E
P
AREA (REF.) 0.17 IN2
Dimension
8.13
.320
B
C
13.36
.526
D
7.01
.276
F
R
G
L
H
CATHODE
ANODE GATE
K
J
N
M
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
Inches
Millimeters
A
0.380
0.420
9.65
10.67
B
0.105
0.115
2.67
2.92
C
0.230
0.250
5.84
6.35
D
0.590
0.620
14.99
15.75
E
0.142
0.147
3.61
3.73
F
0.110
0.130
2.79
3.30
G
0.540
0.575
13.72
14.61
H
0.025
0.035
0.64
0.89
J
0.195
0.205
4.95
5.21
K
0.095
0.105
2.41
2.67
L
0.060
0.075
1.52
1.91
M
0.085
0.095
2.16
2.41
N
0.018
0.024
0.46
0.61
O
0.178
0.188
4.52
4.78
P
0.045
0.060
1.14
1.52
R
0.038
0.048
0.97
1.22
Teccor® brand Thyristors
8 Amp Sensitive & Standard SCRs
Dimensions — TO-251AA (V/I-Package) — V/I-PAK Through Hole
TC MEASURING POINT
E
Anode
H
D
AREA: 0.040 IN2
Dimension
5.28
.208
J
A
5.34
.210
B
R
P
Q
S
K
C
Cathode
Anode
GATE
L
F
G
I
Inches
Millimeters
Min
Typ
Max
Min
Typ
Max
A
0.037
0.040
0.043
0.94
1.01
1.09
B
0.235
0.242
0.245
5.97
6.15
6.22
C
0.350
0.361
0.375
8.89
9.18
9.53
D
0.205
0.208
0.213
5.21
5.29
5.41
E
0.255
0.262
0.265
6.48
6.66
6.73
F
0.027
0.031
0.033
0.69
0.80
0.84
G
0.087
0.090
0.093
2.21
2.28
2.36
H
0.085
0.092
0.095
2.16
2.34
2.41
I
0.176
0.180
0.184
4.47
4.57
4.67
J
0.018
0.020
0.023
0.46
0.51
0.58
K
0.035
0.037
0.039
0.90
0.95
1.00
L
0.018
0.020
0.023
0.46
0.52
0.58
P
0.042
0.047
0.052
1.06
1.20
1.32
Q
0.034
0.039
0.044
0.86
1.00
1.11
R
0.034
0.039
0.044
0.86
1.00
1.11
S
0.074
0.079
0.084
1.86
2.00
2.11
Max
Min
Dimensions — TO-252AA (D-Package) — D-PAK Surface Mount
Anode
E
D
6.71
.264
5.28
.208
TC MEASURING POINT
Dimension
A
6.71
.264
5.34
.210
B
C
P
Q
Cathode
GATE
F
Anode
1.60
.063
1.80
.071
AREA : 0.040 IN2
3
.118
G
I
O L
K
M
N
J
H
4.60
.181
Inches
Min
Typ
Millimeters
Typ
Max
A
0.037
0.040
0.043
0.94
1.01
1.09
B
0.235
0.243
0.245
5.97
6.16
6.22
C
0.106
0.108
0.113
2.69
2.74
2.87
D
0.205
0.208
0.213
5.21
5.29
5.41
E
0.255
0.262
0.265
6.48
6.65
6.73
F
0.027
0.031
0.033
0.69
0.80
0.84
G
0.087
0.090
0.093
2.21
2.28
2.36
H
0.085
0.092
0.095
2.16
2.33
2.41
I
0.176
0.179
0.184
4.47
4.55
4.67
J
0.018
0.020
0.023
0.46
0.51
0.58
K
0.035
0.037
0.039
0.90
0.95
1.00
L
0.018
0.020
0.023
0.46
0.51
0.58
M
0.000
0.000
0.004
0.00
0.00
0.10
N
0.021
0.026
0.027
0.53
0.67
0.69
O
0°
0°
5°
0°
0°
5°
P
0.042
0.047
0.052
1.06
1.20
1.32
Q
0.034
0.039
0.044
0.86
1.00
1.11
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
Teccor® brand Thyristors
8 Amp Sensitive & Standard SCRs
Product Selector
Part Number
Voltage
400V
600V
800V
1000V
Gate Sensitivity
Type
Package
Sxx08RS2
X
X
0.2mA
Sensitive SCR
TO-220R
Sxx08LS2
X
X
0.2mA
Sensitive SCR
TO-220L
Sxx08VS2
X
X
0.2mA
Sensitive SCR
TO-251
Sxx08DS2
X
X
0.2mA
Sensitive SCR
TO-252
Sxx08RS3
X
X
0.5mA
Sensitive SCR
TO-220R
Sxx08LS3
X
X
0.5mA
Sensitive SCR
TO-220L
Sxx08VS3
X
X
0.5mA
Sensitive SCR
TO-251
Sxx08DS3
X
X
0.5mA
Sensitive SCR
TO-252
Sxx08R
X
X
X
X
15mA
Standard SCR
TO-220R
Sxx08L
X
X
X
X
15mA
Standard SCR
TO-220L
Sxx08V
X
X
X
X
15mA
Standard SCR
TO-251
Sxx08D
X
X
X
X
15mA
Standard SCR
TO-252
Note: xx = Voltage
Packing Options
Marking
Weight
Packing Mode
Base Quantity
Sxx08L/Ryy
Part Number
Sxx08L/Ryy
2.2 g
Bulk
500
Sxx08L/RyyTP
Sxx08L/Ryy
2.2 g
Tube
500 (50 per tube)
Sxx08DyyTP
Sxx08Dyy
0.3 g
Tube
750 (75 per tube)
Sxx08DyyRP
Sxx08Dyy
0.3 g
Embossed Carrier
2500
Sxx08VyyTP
Sxx08Vyy
0.4 g
Tube
750 (75 per tube)
Sxx08L/R
Sxx08L/R
2.2 g
Bulk
500
Sxx08L/RTP
Sxx08L/R
2.2 g
Tube
500 (50 per tube)
Sxx08DTP
Sxx08D
0.3 g
Tube
750 (75 per tube)
Sxx08DRP
Sxx08D
0.3 g
Embossed Carrier
2500
Sxx08VTP
Sxx08V
0.4 g
Tube
750 (75 per tube)
Note: xx = Voltage; yy = Sensitivity
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
Teccor® brand Thyristors
8 Amp Sensitive & Standard SCRs
TO-252 Embossed Carrier Reel Pack (RP) Specifications
Meets all EIA-481-2 Standards
* Cover tape
0.315
(8.0)
XXXXXX
DC
XX
Cathode
Anode
12.99
(330.0)
0.512 (13.0)
Arbor Hole
Diameter
0.059
DIA
(1.5)
XXXXXX
DC
XX
Gate
XXXXXX
*
DC
0.524
(13.3)
XXXXXX
0.63
(16.0)
XX
0.157
(4.0)
Dimensions
are in inches
(and millimeters).
0.64
(16.3)
Direction of Feed
TO-202 Type 1 (F Package)
Part Numbering System
TO-202 Type 1 (F Package)
Part Marking System
S 60 08 L S2 56
S6008F1
DEVICE TYPE
S: SCR
VOLTAGE RATING
40: 400V
60: 600V
80: 800V
K0: 1000V
CURRENT RATING
08: 8A
TO-251AA - (V Package)
TO-252AA - (D Package)
yxxxx
®
LEAD FORM DIMENSIONS
xx: Lead Form Option
S6008F1
S6008DS2
TO-251AA - (V Package)
TO-252AA - (D Package)
S6008DS2
yxxxx
®
SENSITIVITY & TYPE
Sensitive SCR:
S2: 200µA
S3: 500µA
Standard SCR:
15mA
TO-220 AB(blank):
- (L and
R Package)
PACKAGE TYPE
L: TO-220 Isolated
R:
TO-220 Non-Isolated
S6008RS2
V: Y
TO-251
MXXX(V/I-Pak)
D: TO-252 (D-Pak)
YMLDD
S6008DS2
YMLDD
®
S6008DS2
®
Date Code Marking
Y:Year Code
M: Month Code
L: Location Code
DD: Calendar Code
YMLDD
®
YMLDD
Date Code Marking
TO-220 AB - (L and R Package)
Y:Year Code
M: Month Code
L: Location Code
DD: Calendar Code
®
Date Code Marking
Y:Year Code
M: Month Code
XXX: Lot Trace Code
S6008RS2
YMXXX
®
Date Code Marking
Y:Year Code
M: Month Code
XXX: Lot Trace Code
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
®
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement