datasheet for 202R18N101JV4E by Johanson Dielectrics

datasheet for 202R18N101JV4E by Johanson Dielectrics
Ceramic Capacitor Solutions
X2Y Low ESL
Stacked SMPS
High Voltage
Mini-SMPS
AC Safety
Radial Leaded
High Capacitance
High Temperature
Your Technology Partner
The mission of the Johanson Companies is to translate
our customer needs into quality electronic components,
produced in factories that are models of excellence,
supported by innovative service. With over 30 years of
experience, Johanson Dielectrics provides both standard and custom technology solutions tailored to your
specific electronic applications.
Our standard product range includes High Voltage and
AC Safety Capacitors providing solutions for Lighting, IT and Business Equipment designs. Our X2Y®
Capacitor line provides advanced EMI filtering and
IC decoupling solutions and our High Capacitance
Tanceram® products provide the highest capacitance
values in the smallest cases sizes.
Customized solutions in the areas of High Temperature
and High AC power ceramic capacitors are available
to customers who require a partnered technology solution.
Johanson Dielectrics design and manufacturing operations are located in Sylmar, California and Zhoaqing,
PRC. Our quality minded management system utilizes continuous improvement programs focused on
increased product reliability, manufacturing throughput, and product performance. Our broad experience,
applications support, and responsive service enhance
our ability to drive down your total cost of procurement and speed your time to market.
HIGH FREQUENCY CERAMIC SOLUTIONS
are offered by our sister company, Johanson Technology Inc., Camarillo CA. Products include High Q
Capacitors, Ceramic and Wire-wound Chip Inductors,
and a broad range of LTCC based RF IPCs such as
Antennas, Filters, Baluns, Couplers, Matched Filter
Baluns, etc.
www.johansontechnology.com
Johanson Dielectrics, Inc. reserves the right to make design and price changes without notice. All sales
are subject to the terms and conditions printed on the back side of our sales order acknowledgment forms,
including a limited warranty and remedies for non-conforming goods or defective goods. We will be pleased
to provide a copy of these terms and conditions for your review.
www.johanson dielectrics.com
2
15191 Bledsoe St., Sylmar, California 91342 • Tel (818) 364-9800 • Fax (818) 364-6100
SURFACE MOUNT CERAMIC CAPACITORS
Ceramic Capacitor Prototyping Kits
4-5
High Voltage Capacitors 250 - 6,000 VDC
6-7
Safety Capacitors 250 VAC, Y2, Y3, Japan Standard
8-9
®
Low Inductance X2Y Capacitors
10-13
Low Inductance Capacitors
14
Chip Feedthru Filter Capacitors
15
High Power AC Capacitors
16
High Temperature - 200°C Capacitors
High Capacitance Tanceram® Capacitors
17
18-19
SMT Multi-layer Ceramic Capacitors 10 - 200 VDC
20-21
LEADED CERAMIC CAPACITORS
SMPS Stacked Capacitors, 125°C & 200°C versions
22-23
Mini-SMPS Stacked Capacitors
24-25
Maxi-CapTM SMPS Capacitors
26-27
®
X2Y Low ESL SMPS Stacked Capacitors
28-29
Switch-mode Radial Leaded Capacitors
30-31
High Voltage Radial Leaded Capacitors, 125°C, 200°C, 250°C versions
32-33
Part Number, Dielectric, Packaging Specifications
34-35
ON-LINE PRODUCTS
ON-LINE INFORMATION
N2200 Chip Capacitors
Dielectric Characteristics
200°C Radial Leaded Capacitors
Packaging & Marking
Tin-Lead Termination Capacitors
Polyterm® Termination Capacitors
Environmental Compliance Policies
Large Size Multi-layer Ceramic Capacitors
High Voltage PCB Design
X2Y Filter Eval. & PCB Design Guide
Capacitor Power Handling
Lead-Free Reflow Processing
www.johanson dielectrics.com
3
CERAMIC CAPACITOR ENGINEERING DESIGN KITS
Johanson Dielectrics, Inc. offers a variety of multi-layer chip
capacitor sample kits for proto-type design work. Each kit is
grouped by type, size, or voltage and contains a selection of popular
values and tolerances. The chips are individually packaged in
labeled plastic compartments for easy access. The general range of
kit contents is described below. Specific part number details may be
found at JohansonDielectrics.com
0402 CERAMIC CHIP CAPACITOR KIT
P/N: S-0402
1400 piece sample assortment of selected values from 1.0pF to 0.1µF
Chip Size
Voltage Rating
Dielectric
Capacitanc Range
Qty / Value
Total Qty
0402
50 VDC - 6.3 VDC
NPO, X7R,Y5V
1.0pF to 0.22µF
50 pcs
1400 pcs
0603 CERAMIC CHIP CAPACITOR KIT
P/N: S-0603
1400 piece sample assortment of selected values from 1.0pF to 0.1µF
Chip Size
Voltage Rating
Dielectric
Capacitanc Range
Qty / Value
Total Qty
0603
50 VDC - 16 VDC
NPO, X7R,Y5V
10pF to 0.22µF
50 pcs
1400 pcs
0805 CERAMIC CHIP CAPACITOR KIT
P/N: S-0805
1400 piece sample assortment of selected values from 1.0pF to 0.1µF
Chip Size
Voltage Rating
Dielectric
Capacitanc Range
Qty / Value
Total Qty
0805
100 VDC - 16 VDC
NPO, X7R
10pF to 0.47µF
50 pcs
1400 pcs
TANCERAM® HIGH CAPACITANCE CERAMIC CHIP CAPACITOR KIT
P/N: S-TAN-X5R
500 piece sample assortment of selected values from 1.0µF to 100µF
Chip Size
Voltage Rating
Dielectric
Capacitanc Range
Qty / Value
Total Qty
0402, 0603, 0805
1206, 1210
25 VDC - 6.3 VDC
X5R
1.0µF - 100µF
10 - 25 pcs
500 pcs
500 VDC CERAMIC CHIP CAPACITOR KIT
P/N: S-500
400 piece sample assortment of selected values from 33pF to 0.1µF
Chip Size
Voltage Rating
Dielectric
Capacitanc Range
Qty / Value
Total Qty
0805 - 1812
500 VDC
NPO, X7R
33pF to 0.1µF
10-20 pcs
400 pcs
1000 VDC CERAMIC CHIP CAPACITOR KIT
P/N: S-1KV
400 piece sample assortment of selected values from 22pF to 0.1µF
Chip Size
Voltage Rating
Dielectric
Capacitanc Range
Qty / Value
Total Qty
0805 - 2225
1000 VDC
NPO, X7R
22pF to 0.1µF
10-20 pcs
400 pcs
Johanson may from time-time adjust actual kit contents based on design demand trends.
Check the Johanson web site for design kit updates and kit content changes.
4
www.johanson dielectrics.com
CERAMIC CAPACITOR ENGINEERING DESIGN KITS
2000 VDC CERAMIC CHIP CAPACITOR KIT
P/N: S-2KV
300 piece sample assortment of selected values from 22pF to 0.022µF
Chip Size
Voltage Rating
Dielectric
Capacitanc Range
Qty / Value
Total Qty
1206 - 2225
2000 VDC
NPO, X7R
22pF to 0.022µF
10-20 pcs
300 pcs
X2/Y3 SAFETY CERTIFIED CERAMIC CHIP CAPACITOR KIT
P/N: S-SY3
240 piece sample assortment of selected values from 10pF to 1500 pF
Chip Size
Voltage Rating
Dielectric
Capacitanc Range
Qty / Value
Total Qty
1808
3KV DC / 250 AC
NPO, X7R
10pF to 1500 pF
20 pcs
240 pcs
X1/Y2 SAFETY CERTIFIED CERAMIC CHIP CAPACITOR KIT
P/N: S-SY2
200 piece sample assortment of selected values from 10pF to 2200 pF
Chip Size
Voltage Rating
Dielectric
Capacitanc Range
Qty / Value
Total Qty
1808 - 2220
5KV DC / 250 AC
NPO, X7R
10pF to 2200pF
20 pcs
200 pcs
X2Y® EMI FILTER CAPACITOR KIT - 0402 SIZE
P/N: S-X07CBK
600 piece sample assortment of selected values from 1.0pF to 0.01µF
Chip Size
Voltage Rating
Dielectric
Capacitanc Range
Qty / Value
Total Qty
0402
10 - 50 VDC
NPO, X7R
1.0pF to 0.01µF
50 pcs
600 pcs
X2Y® EMI FILTER CAPACITOR KIT - 0603 SIZE
P/N: S-X14CBK
700 piece sample assortment of selected values from 1.0pF to 0.01µF
Chip Size
Voltage Rating
Dielectric
Capacitanc Range
Qty / Value
Total Qty
0603
50 - 100 VDC
NPO, X7R
1.0pF to 0.01µF
50 pcs
700 pcs
X2Y® POWER BYPASS CAPACITOR KIT - 0603 SIZE
P/N: S-X14-PBP
300 piece sample assortment of selected values from 1.0nF to 1.0µF
Chip Size
Voltage Rating
Dielectric
Capacitanc Range
Qty / Value
Total Qty
0603
6.3 - 100 VDC
X7R, X5R
1.0nF to 1.0µF
20 pcs
300 pcs
X2Y® EMI FILTER CAPACITOR KIT - 0805 SIZE
P/N: S-X15-EMI
300 piece sample assortment of selected values from 1.0pF to 0.01µF
Chip Size
Voltage Rating
Dielectric
Capacitanc Range
Qty / Value
Total Qty
0805
50 - 100 VDC
NPO, X7R
1.0pF to 0.01µF
20 pcs
300 pcs
X2Y® DC MOTOR FILTER CAPACITOR KIT
P/N: S-X2Y-MTR
300 piece sample assortment of selected values from 0.10µF to 0.47µF
Chip Size
Voltage Rating
Dielectric
Capacitanc Range
Qty / Value
Total Qty
1206 - 1812
100 VDC
X7R
0.10µF to 0.47µF
30 pcs
300 pcs
Johanson may from time-time adjust actual kit contents based on design demand trends.
Check the Johanson web site for design kit updates and kit content changes.
www.johanson dielectrics.com
5
HIGH VOLTAGE SURFACE MOUNT MLCCS 250 - 6,000 VDC
These high voltage capacitors feature a special internal
electrode design which reduces voltage concentrations by
distributing voltage gradients throughout the entire capacitor.
This unique design also affords increased capacitance values
in a given case size and voltage rating. The capacitors are
designed and manufactured to the general requirement of
EIA198 and are subjected to a 100% electrical testing making
them well suited for a wide variety of telecommunication,
commercial, and industrial applications.
APPLICATIONS
• Analog & Digital Modems
• Lighting Ballast Circuits
• DC-DC Converters
• LAN/WAN Interface
• Voltage Multipliers
• Back-lighting Inverters
NOW AVAILABLE with Polyterm® soft termination option for
demanding environments & processes. Visit our website for full details.
CASE SIZE
JDI /EIA
R15/0805
R18/1206
S41/1210
CAPACITANCE SELECTION
Inches
(mm)
L
W
T
E/B
.080 ±.010
.050 ±.010
.055 Max.
.020 ±.010
(2.03 ±.25)
(1.27 ±.25)
(1.40)
(0.51±.25)
L
W
T
E/B
.125 ±.010
.062 ±.010
.067 Max.
.020 ±.010
(3.17 ±.25)
(1.57 ±.25)
(1.70)
(0.51±.25)
L
W
T
E/B
.125 ±.010
.095 ±.010
.080 Max.
.020 ±.010
(3.18 ±.25)
(2.41 ±.25)
(2.03)
(0.51±.25)
L
W
T
E/B
.189 ±.010
.080 ±.010
.085 Max.
.020 ±.010
(4.80 ±.25)
(2.03 ±.25)
(2.16)
(0.51±.25)
R29/1808
Rated
Voltage
250
500
630
1000
250
500
630
1000
2000
3000
250
500
630
1000
2000
3000
500
630
1000
2000
3000
4000
5000
6000
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
NPO Dielectric
Minimum
Maximum
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
1.0
1.0
1.0
1.0
1.0
1.0
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
680
560
390
1500
1200
1000
220
82
3900
2700
1800
560
220
4700
3300
2200
820
470
180
75
75
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
X7R Dielectric
Minimum
Maximum
1000
1000
1000
100
1000
1000
1000
100
100
100
1000
1000
1000
100
100
100
1000
1000
100
100
100
100
47
47
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
pF
0.022
0.010
6800
4700
0.068
0.047
0.027
0.018
4700
1000
0.220
0.100
0.056
0.047
3900
2700
0.100
0.068
0.047
8200
3900
2200
1000
100
Available cap. values include these significant retma values and their multiples: 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2
( 1.0 = 1.0, 10, 100, 1000, etc.) Consult factory for non-retma values and sizes or voltages not shown.
6
www.johanson dielectrics.com
µF
µF
pF
pF
µF
µF
µF
µF
pF
pF
µF
µF
µF
µF
pF
pF
µF
µF
µF
pF
pF
pF
pF
pF
HIGH VOLTAGE SURFACE MOUNT MLCCS 250 - 6,000 VDC
CASE SIZE
JDI /EIA
Inches
CAPACITANCE SELECTION
S43 / 1812
S49 / 1825
S47 / 2220
S48 / 2225
NPO Dielectric
Minimum
Maximum
Rated
Voltage
(mm)
L
W
T
E/B
.180 ±.010
.125 ±.010
.110 Max.
.025 ±.015
(4.57 ±.25)
(3.17 ±.25)
(2.80)
(0.64±.38)
L
W
T
E/B
.180 ±.010
.250 ±.010
.140 Max.
.025 ±.015
(4.57 ±.25)
(6.35 ±.25)
(3.56)
(0.64±.38)
L
W
T
E/B
.225 ±.015
.200 ±.015
.150 Max.
.025 ±.015
(5.72 ±.38)
(5.08 ±.38)
(3.81)
(0.64±.38)
L
W
T
E/B
.225 ±.010
.255 ±.015
.160 Max.
.025 ±.015
(5.72 ±.25)
(6.48 ±.38)
(4.06)
(0.64±.38)
250
500
630
1000
2000
3000
4000
5000
6000
500
630
1000
2000
3000
4000
5000
6000
500
630
1000
2000
3000
4000
5000
6000
500
630
1000
2000
3000
4000
5000
6000
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
VDC
100 pF
100 pF
10 pF
10 pF
10 pF
10 pF
10 pF
10 pF
100 pF
100 pF
10 pF
10 pF
10 pF
10 pF
10 pF
10 pF
1000 pF
1000 pF
100 pF
100 pF
10 pF
10 pF
10 pF
10 pF
1000 pF
1000 pF
100 pF
100 pF
10 pF
10 pF
10 pF
10 pF
8200 pF
6800 pF
5600 pF
1800 pF
1000 pF
390 pF
150 pF
150 pF
0.018 µF
0.015 µF
0.012 µF
5600 pF
2200 pF
1200 pF
390 pF
390 pF
0.018 µF
0.018 µF
0.015 µF
5600 pF
2700 pF
1500 pF
470 pF
470 pF
0.027 µF
0.022 µF
0.018 µF
8200 pF
3300 pF
1800 pF
470 pF
470 pF
X7R Dielectric
Minimum
Maximum
0.010 µF
1000 pF
1000 pF
1000 pF
100 pF
100 pF
100 pF
100 pF
10 pF
0.01 µF
0.01 µF
1000 pF
100 pF
100 pF
100 pF
100 pF
100 pF
0.01 µF
0.01 µF
1000 pF
1000 pF
100 pF
100 pF
100 pF
100 pF
0.01 µF
0.01 µF
1000 pF
1000 pF
100 pF
100 pF
100 pF
100 pF
0.470 uF
0.330 uF
0.180 µF
0.100 µF
0.010 µF
6800 pF
2200 pF
1000 pF
680 pF
1.000 µF
0.270 µF
0.047 µF
0.022 µF
0.010 µF
2700 pF
1200 pF
820 pF
0.680 µF
0.470 µF
0.100 µF
0.047 µF
0.015 µF
3300 pF
2200 pF
1500 pF
1.000 µF
0.680 µF
0.220 µF
0.100 µF
0.022 µF
0.010 µF
3300 pF
1500 pF
Available cap. values include these significant retma values and their multiples: 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2
( 1.0 = 1.0, 10, 100, 1000, etc.) Consult factory for non-retma values and sizes or voltages not shown.
ELECTRICAL CHARACTERISTICS
W
L
T
E/B
Meets the standard NPO & X7R dielectric specifications listed on page 20
Dielectric Withstanding Voltage
DWV = 1.5 X rated WVDC for ratings ≤ 500 WVDC,
DWV = 1.2 X rated WVDC for ratings ≥ 1,000 WVDC
NOTE: Capacitors may require a surface coating to prevent external arcing. Solder mask should not be used
beneath capacitors. For more information see JDI Tech Note “Surface Arc Season”
HOW TO ORDER HIGH VOLTAGE SURFACE MOUNT
P/N written: 202R18W102KV4E
202
R18
W
102
K
V
4
E
VOLTAGE
SIZE
DIELECTRIC
CAPACITANCE
TOLERANCE
TERMINATION
MARKING
PACKING
R15=0805
R18=1206
R29=1808
S41=1210
S43=1812
S47=2220
S48=2225
S49=1825
N = NPO
W = X7R
1st two digits are
significant; third digit
denotes number of
zeros.
102 = 1000 pF
104 = 0.10 µF
J = ± 5%
K = ± 10%
M = ± 20%
V = NI Barrier with 100%
Sn Plating (Matte)
4 = Unmarked
6 = EIA Code
501 = 500 V
631 = 630 V
102 = 1000 V
202 = 2000 V
302 = 3000 V
402 = 4000 V
502 = 5000 V
602 = 6000 V
F = Polyterm
flexible termination
T = SnPb
www.johanson dielectrics.com
E =Embossed 7”
T =Punched 7”
No code = bulk
Tape specs.
per EIA RS481
7
AC SAFETY CAPACITORS
Johanson Dielectrics Type SC ceramic chip capacitors are
designed for AC voltage surge and lightning protection in
line-to-ground interface applications in computer networks,
modem, facsimile and other equipment.
Johanson’s safety capacitor offering includes four different
case sizes and NPO and X7R dielectric materials.
These devices are surface mount ready with barrier
terminations and tape and reel packaging.
Information on capacitor safety ratings and certification details
may be found below.
W
L
T
SAFETY
RATING
X2/Y3
Polyterm® soft termination
option available for
demanding environments &
processes.
E/B
VOLTAGE
RATING
WITHSTANDING
VOLTAGE
IMPULSE
VOLTAGE
CASE
SIZE
JOHANSON
ORDERING P/N
250 VAC
1,500 VAC
2,500 V
1808
302R29______V3E-****-SC
STANDARDS: EN 60384-14:2005, EN 60950 2001 • UL 60950-01 CERTIFICATIONS: TUV Rheinland T72110251 • UL File E212609 • Semko 0026092-1 & 0003222-1
Y3
250 VAC
1,500 VAC
2,500 V
1812
302S43______V3E-****-SC
1808
502R29______V3E-****-SC
STANDARDS: EN 60384-14:2005, EN 60950:2001 CERTIFICATIONS: TUV Rheinland T72110251
X1/Y2
250 VAC
1,500 VAC
5,000 V
STANDARDS: EN 60384-14:2005 • UL 60950-01 CERTIFICATIONS: TUV Rheinland T72110897 / UL File E212609-A1-UL-1
Y2
250 VAC
1,500 VAC
5,000 V
2211
502R30______V3E-****-SC
STANDARDS: EN 60384-14:2005 • UL 60950-01 CERTIFICATIONS: TUV Rheinland T72110897 • UL File: E212609-A1-UL-1
X1/Y2
250 VAC
1,500 VAC
5,000 V
2220
502S47______V3E-****-SC
STANDARDS: EN 60384-14:2005 • UL 60950-01 CERTIFICATIONS: TUV Rheinland T72110897 • UL File: E212609-A1-UL-1
Japan
250 VAC
1,500 VAC
N/A
2220
AC2_________V4E-****-JS
STANDARDS: JIS-C-5102 • JIS-C-5150 CERTIFICATIONS: N/A
X Capacitors are defined as suitable for use in situations where failure of the capacitor would not lead to danger of electric shock.
Y Capacitors are defined as suitable for use in situations where failure of the capacitor could lead to danger of electric shock.
HOW TO ORDER AC SAFETY CAPACITORS
302
P/N written: 302R29W102MV3E-****-SC
R29
W
102
M
VOLTAGE
SIZE
DIELECTRIC
CAPACITANCE
TOLERANCE
302 = 250VAC
[3000V Impulse]
502 = 250VAC
[5000V Impulse]
AC2 =250VAC
[N/A]
R29=1808
R30=2211
S43=1812
S47=2220
AC2=2220
N = NPO
W = X7R
1st two digits are
significant; third digit
denotes number of
zeros, R = decimal.
102 = 1000 pF
104 = 0.10 µF
5R0 = 5.0pF
J = ± 5%
K = ± 10%
M = ± 20%
8
V
3
E
TERMINATION
MARKING
PACKING
V = NI Barrier with 3 = Special E = Embossed 7”
100% Sn Plating 4 = Unmarked
No code = bulk
(Matte)
Tape specs.
F = Polyterm
per EIA RS481
flexible termination
www.johanson dielectrics.com
-**** -SC
TYPE
SC = Safety
Certified
JS = Japan
Safety
AC SAFETY CAPACITORS
R29 / 1808
X2/Y3
S43 / 1812
Y3
L
W
T
E/B
INCHES
.189 ±.010
.080 ±.010
.085 Max.
.020 ±.010
(mm)
(4.80 ±.25)
(2.03 ±.25)
(2.16)
(0.51±.25)
L
W
T
E/B
INCHES
.175 ±.010
.125 ±.010
.115 Max.
.025 ±.015
(mm)
(4.45 ±.25)
(3.17 ±.25)
(2.92)
(0.64±.38)
L
W
T
E/B
INCHES
.189 ±.010
.080 ±.010
.085 Max.
.012 ±.005
(mm)
(4.80 ±.25)
(2.03 ±.25)
(2.16)
(0.30±.13)
L
W
T
E/B
INCHES
.225 ±.016
.110 ±.010
.115 Max.
.020 ±.010
(mm)
(5.72 ±.40)
(2.80 ±.25)
(2.92)
(0.51±.25)
L
W
T
E/B
INCHES
.225 ±.015
.200 ±.015
.150 Max.
.025 ±.015
(mm)
(5.72 ±.38
(5.08 ±.38)
(3.81)
(0.64±.38)
R29 / 1808
X1/Y2
R30 / 2211
Y2
S47 / 2220
X1/Y2
5 pF
10 p
F
12 p
F
15 p
F
18 p
F
22 p
F
27 p
F
33 p
F
47 p
F
56 p
F
68 p
F
100
pF
120
pF
150
pF
180
pF
220
pF
270
pF
330
pF
470
pF
560
pF
680
pF
100
0 pF
120
0p
150 F
0p
180 F
0p
220 F
0p
270 F
0p
330 F
0p
470 F
0 pF
SAFETY CERTIFIED
JAPAN STANDARD
J29 / 1808
Japan Safety
J43 / 1812
Japan Safety
J47 / 2220
Japan Safety
DIELECTRIC
NPO
X7R
470pF
L
W
T
E/B
INCHES
.189 ±.010
.080 ±.010
.085 Max.
.020 ±.010
(mm)
(4.80 ±.25)
(2.03 ±.25)
(2.16)
(0.51±.25)
L
W
T
E/B
INCHES
.175 ±.010
.125 ±.010
.115 Max.
.025 ±.015
(mm)
(4.45 ±.25)
(3.17 ±.25)
(2.92)
(0.64±.38)
L
W
T
E/B
INCHES
.225 ±.015
.200 ±.015
.150 Max.
.025 ±.015
(mm)
(5.72 ±.38
(5.08 ±.38)
(3.81)
(0.64±.38)
1000pF
2200pF
3300pF
4700pF
0.01µF
www.johanson dielectrics.com
0.022µF
0.047µF
0.10µF
9
X2Y® FILTER & DECOUPLING CAPACITORS
X2Y® filter capacitors employ a unique, patented low inductance design featuring two balanced capacitors
that are immune to temperature, voltage and aging performance differences.
These components offer superior decoupling and EMI filtering performance, virtually eliminate parasitics,
and can replace multiple capacitors and inductors saving board space and reducing assembly costs.
1.0µF
105
2.0µF
0.47µF
474
0.94µF
0.40µF
0.80µF
404
0.22µF
0.33µF
0.68µF
334
10
0.44µF
16
224
0.18µF
0.36µF
184
0.10µF
.047µF
.094µF
.022µF
25
.015µF
25
0.20µF
16
104
50
.078µF .039µF
50
393
50
.044µF
50
Amplifier FIlter & Decoupling
High Speed Data Filtering
EMC I/O Filtering
FPGA / ASIC / µ-P Decoupling
DDR Memory Decoupling
223
50
.030µF
.010µF
.020µF
9400pF 4700pF
4400pF 2200pF
3000pF 1500pF
2000pF 1000pF
470pF
940pF
220pF
50
•
•
•
•
•
153
50
103
50
472
50
222
50
152
50
102
50
471
101
50
221
470
NPO
440pF
100pF
330
200pF
47pF
270
94pF
33pF
220
66pF
27pF
100
54pF
22pF
10pF
XRX
SIZE
One device for EMI suppression or decoupling
Replace up to 7 components with one X2Y
Differential and common mode attenuation
Matched capacitance line to ground, both lines
Low inductance due to cancellation effect
CAP.
CODE
Power Bypass
(2 Y-Caps.)
44pF
<20pF
EMI Filtering
(1 Y-Cap.)
20pF
<10pF
•
•
•
•
•
APPLICATIONS
473
ADVANTAGES
16
10
10
10
16
16
10
100 100
25
0402 (X07)
X7R
NPO
0603 (X14)
100 100 100 100 100
X7R
50
50
50
100 100 100 100 100 100 100 100
50
6.3
X5R
NPO
100 100 100 100 100 100 100
50
0805 (X15)
X7R
NPO
1206 (X18
X7R
1210 (X41)
X7R
1410 (X44)
X7R
1812 (X43)
X7R
100 100 100 100 100 100 100 100
VOLTAGE
RATINGS
6.3 = 6.3 VDC
10 = 10 VDC
16 = 16 VDC
25 = 25 VDC
50 = 50 VDC
100 = 100 VDC
500 = 500 VDC
50
50
50
25
10
100
100 100 100
100 100
500
100
500
16
100
500
100
Contact factory for part combinations not shown.
Filtering capacitance is specified as Line-to-Ground ( Terminal A or B to G) Power Bypass capacitance is specified Power-to-Ground (A + B to G)
Rated voltage is from line to ground in Circuit 1, power to ground in Circuit 2 .
HOW TO ORDER X2Y® FILTER & DECOUPLING CAPACITORS
P/N written: 101X14W102MV4T
100
X14
W
102
M
V
4
T
VOLTAGE
SIZE
DIELECTRIC
CAPACITANCE
TOLERANCE
TERMINATION
MARKING
PACKING
X07=0402
X14=0603
X15=0805
X18=1206
X41=1210
X44=1410
X43=1812
N = NPO
W = X7R
X = X5R
6R3
100
160
250
500
101
501
=
=
=
=
=
=
=
6.3 V
10 V
16 V
25 V
50 V
100 V
500 V
1st two digits are
M = ± 20%
V = NI Barrier with 100%
significant; third digit * D = ± 0.50 pF
Tin Plating (Matte)
denotes number of
*Values
<
10
pF
only
F = Polyterm
zeros, R = decimal.
flexible termination
102 = 1000 pF
104 = 0.10 µF
T = SnPb
5R6 = 5.6pF
4 = Unmarked
(Not available)
X2Y® technology patents and registered trademark under license from X2Y ATTENUATORS, LLC
10
www.johanson dielectrics.com
E =Embossed 7”
T =Punched 7”
No code = bulk
Tape specs.
per EIA RS481
X2Y® FILTER & DECOUPLING CAPACITORS
Signal 1
EMI Filtering S21
Signal-to-Ground
Ground
Power
Power Bypass S21
Power-to-Ground
A
G1
G2
A
G1
B
Signal 2
G2
B
Ground
Labeled capacitance values below follow the P/N order code (single Y cap value)
Effective capacitance measured in Circuit 2 is 2X of the labled single Y cap value.
Approximate Impedance (Ω)
1.00Ω
0.10Ω
1.00Ω
0.10Ω
Approximate Impedance (Ω)
10.0Ω
10.0Ω
0.01Ω
0.01Ω
ELECTRICAL CHARACTERISTICS
Temperature Coefficient:
NPO
X7R
X5R
±15% (-55 to +125°C)
±15% (-55 to +125°C)
±15% (-55 to +85°C)
Vrated ≤100VDC: DWV = 2.5 X WVDC, 25°C, 50mA max.
Dielectric Strength:
Dissipation Factor:
Vrated = 500VDC: DWV = 1.5 X WVDC, 25°C, 50mA max.
WVDC ≥ 50 VDC: 2.5% max.
WVDC = 25 VDC: 3.5% max.
WVDC = 10-16 VDC: 5.0% max.
WVDC = 6.3 VDC: 10% max.
0.1% max.
WVDC ≥ 50 VDC: 5% max.
WVDC ≤ 25 VDC: 10% max.
C≤ 0.047µF: 1000 ΩF or 100 GΩ, whichever is less
C> 0.047µF: 500 ΩF or 10 GΩ, whichever is less
Insulation Resistance
(Min. @ 25°C, WVDC)
C > 100 pF; 1kHz ±50Hz; 1.0±0.2 VRMS
C ≤ 100 pF; 1Mhz ±50kHz; 1.0±0.2 VRMS
Test Conditions:
Other:
1.0kHz±50Hz @ 1.0±0.2 Vrms
See main catalog page 35 for additional dielectric specifications.
Equivalent Circuits
Cross-sectional View
A
G1
Dimensional View
G
CB
EB
A
G2
B
T
W
L
G
B
CASE SIZE
0402 (X07)
0603 (X14)
0805 (X15)
1206 (X18)
1210 (X41)
1410 (X44)
1812 (X43)
IN
IN
IN
IN
IN
IN
IN
mm
mm
mm
mm
mm
mm
mm
L
0.045 ±
0.003
1.143 ±
0.076
0.064 ±
0.005
1.626 ±
0.127
0.080 ±
0.008
2.032 ±
0.203
0.124 ±
0.010
3.150 ±
0.254
0.125 ±
0.010
3.175 ±
0.254
0.140 ±
0.010
3.556 ±
0.254
0.174 ±
0.010
4.420 ±
0.254
W
0.025 ±
0.003
0.635 ±
0.076
0.035 ±
0.005
0.889 ±
0.127
0.050 ±
0.008
1.270 ±
0.203
0.063 ±
0.010
1.600 ±
0.254
0.098 ±
0.010
2.489 ±
0.254
0.098 ±
0.010
2.490 ±
0.254
0.125 ±
0.010
3.175 ±
0.254
T
0.020
max
0.508
max
0.026
max
0.660
max
0.040
max
1.016
max
0.050
max
1.270
max
0.070
max
1.778
max
0.070
max
1.778
max
0.090
max
2.286
max
EB
0.008 ±
0.003
0.203 ±
0.076
0.010 ±
0.006
0.254 ±
0.152
0.012 ±
0.008
0.305 ±
0.203
0.016 ±
0.010
0.406 ±
0.254
0.018 ±
0.010
0.457 ±
0.254
0.018 ±
0.010
0.457 ±
0.254
0.022 ±
0.012
0.559 ±
0.305
CB
0.012 ±
0.003
0.305 ±
0.076
0.018 ±
0.004
0.457 ±
0.102
0.022 ±
0.005
0.559 ±
0.127
0.040 ±
0.005
1.016 ±
0.127
0.045 ±
0.005
1.143 ±
0.127
0.045 ±
0.005
1.143 ±
0.127
0.045 ±
0.005
1.143 ±
0.127
www.johanson dielectrics.com
11
X2Y® FILTER & DECOUPLING CAPACITORS
The X2Y® Design - A Balanced, Low ESL, “Capacitor Circuit”
The X2Y® capacitor design starts with standard 2 terminal MLC capacitor’s opposing electrode sets, A & B, and adds a third electrode set (G) which surround
each A & B electrode. The result is a highly vesatile three node capacitive circuit containing two tightly matched, low inductance capacitors in a compact, fourterminal SMT chip.
EMI Filtering:
Signal 1
A
Ground
G1
The X2Y® component contains two shunt or “line-to-ground” Y capacitors. Ultra-low ESL (equivalent series
inductance) and tightly matched inductance of these capacitors provides unequaled high frequency Common-Mode
noise filtering with low noise mode conversion. X2Y® components reduce EMI emissions far better than unbalanced
discrete shunt capacitors or series inductive filters. Differential signal loss is determined by the cut off frequency of
the single line-to-ground (Y) capacitor value of an X2Y.
G2
B
Signal 2
Power
Power Bypass / Decoupling
A
G1
For Power Bypass applications, X2Ys® two “Y” capacitors are connected in parallel. This doubles the total
capacitance and reduces their mounted inductance by 80% or 1/5th the mounted inductance of similar sized MLC
capacitors enabling high-performance bypass networks with far fewer components and vias. Low ESL delivers
improved High Frequency performance into the GHz range.
G2
B
Ground
GSM RFI Attenuation in Audio & Analog
GSM handsets transmit in the 850 and 1850 MHz bands using a TDMA pulse
rate of 217Hz. These signals cause the GSM buzz heard in a wide range of
audio products from headphones to concert hall PA systems or “silent” signal
errors created in medical, industrial process control, and security applications.
Testing was conducted where an 840MHz GSM handset signal was delivered
to the inputs of three different amplifier test circuit configurations shown below
whose outputs were measured on a HF spectrum analyzer.
1) No input filter, 2 discrete MLC 100nF power bypass caps.
2) 2 discrete MLC 1nF input filter, 2 discrete MLC 100nF power bypass caps.
3) A single X2Y 1nF input filter, a single X2Y 100nF power bypass cap.
X2Y configuration provided a nearly flat response above the ambient and up to
10 dB imrpoved rejection than the conventional MLCC configuration.
Amplifier Input Filter Example
In this example, a single Johanson X2Y® component was used to filter noise at the input of a DC
instrumentation amplifier. This reduced component count by 3-to-1 and costs by over 70% vs.
conventional filter components that included 1% film Y-capacitors.
Parameter
X2Y®
10nF
Discrete
10nF, 2 @ 220 pF
Comments
DC offset shift
< 0.1 µV
< 0.1 µV
Referred to input
Common mode rejection
91 dB
92 dB
Source: Analog Devices, “A Designer’s Guide to Instrumentation Amplifiers (2nd Edition)” by Charles Kitchin and Lew Counts
12
www.johanson dielectrics.com
X2Y® FILTER & DECOUPLING CAPACITORS
Common Mode Choke Replacement
• Superior High Frequency Emissions Reduction
• Smaller Sizes, Lighter Weight
• No Current Limitation
• Vibration Resistant
• No Saturation Concerns
See our website for a detailed application note with component test
comparisons and circuit emissions measurements.
Measured Common Mode Rejection
Parallel Capacitor Solution
A common design practice is to parallel decade capacitance values to extend
the high frequency performance of the filter network. This causes an unintended
and often over-looked effect of anti-resonant peaks in the filter networks
combined impedance. X2Y’s very low mounted inductance allows designers
to use a single, higher value part and completely avoid the anti-resonance
problem. The impedance graph on right shows the combined mounted
impedance of a 1nF, 10nF & 100nF 0402 MLC in parrallel in RED. The MLC
networks anti-resonance peaks are nearly 10 times the desired impedance. A
100nF and 47nF X2Y are plotted in BLUE and GREEN. (The total capacitance of
X2Y (Circuit 2) is twice the value, or 200nF and 98nF in this example.) The sigle
X2Y is clearly superior to the three paralleled MLCs.
X2Y High Performance Power Bypass - Improve Performance, Reduce Space & Vias
Actual measured performance of two high performance SerDes FPGA designs demonstrate how a 13 component X2Y bypass network significantly out
performs a 38 component MLC network. For more information see http://johansondielectrics.com/pdfs/JDI_X2Y_STXII.pdf
www.johanson dielectrics.com
13
LOW INDUCTANCE CHIP CAPACITORS (LICC)
LICC capacitors are specially designed to exhibit lower inductance
by altering the aspect ratio of the terminations. The smaller current
loop length results in Equivalent Series Inductance (ESL) that is
typically 60% lower then standard MLCs of the same size. This
ESL improvement is extremely advantageous in the high frequency
power decoupling of high speed digital MPU, FPGA, DSP, etc..
FEATURES
• Low Inductance
• Surface Mount
• High Series Resonant Frequency
• RoHS Compliant
• Sn-Pb and
• Small Size
Polyterm®
Termination Options
MLC
W
L
L
W
AVAILABLE CAPACITANCE
CASE SIZE
Inches
(mm)
Dielectric
10nF
22nF
47nF
0.10µF
0.22µF
25V
25V
25V
16V
6.3V
10V
25V
0306
B14
L
W
T
EB
.032 ±.008
.063 ±.008
.035 Max.
.010±.005
(0.81 ±.20)
(1.60 ±.20)
(0.90)
(0.25±.13)
X7R
0508
B15
L
W
T
EB
.050 ±.010
.080 ±.010
.060 Max.
.020±.010
(1.27 ±.25)
(2.03 ±.25)
(1.52)
(0.51±.25)
X7R
0612
B18
L
W
T
EB
.062 ±.010
.125 ±.010
.060 Max.
.010±.005
(1.57 ±.25)
(3.17 ±.25)
(1.52)
(0.25±.13)
X7R
X5R
50V
50V
25V
0.47µF
1.00µF
2.2 µF
10V
6.3V
6.3V
6.3V
16V
6.3V
6.3V
10V
10V
16V
6.3V
X5R
X5R
50V
50V
50V
50V
25V
10V
Please visit our website for additional product details and ordering information
14
LICC
www.johanson dielectrics.com
4.7µF
10µF
6.3V
6.3V
6.3V
10V
CHIP FILTER / FEED-THRU CAPACITORS
Our Feed-Thru Capacitors provide excellent EMI, I/O & Power
Line filtering exhibiting much lower inductance than standard SMT
capacitors which results in broader frequency response. These
are Precious Metal Electrode (PME) products with higher current
ratings than comparable Base Metal Electrode (BME) parts.
FEATURES
• 1 Amp Current Rating
• Low Inductance, High SRF
• Surface Mount Non-polarized
• Sn-Pb and Polyterm® Termination Options
APPLICATIONS
• DC Power Line EMI Filter
• RF Immunity FIlter
• RF Amplifier Gain Filter
0603
F14
L
W
T
EB
CB
.064 ± .005
.035 ± .005
.026 Max.
.009 ± .004
.018 ± .004
(1.60 ± 0.20)
(0.81 ± 0.20)
(0.66)
(0.23± 0.10)
(0.46 ± 0.10)
0805
F15
L
W
T
EB
CB
.080 ± .080
.050 ± .080
.040 Max.
.009 ± .004
.020 ± .005
(2.03 ± 0.25)
(1.27 ± 0.25)
(1.02)
(0.23 ± 0.10 )
(0.56 ± 0.12)
1206
F18
L
W
T
EB
CB
.124 ± .010
.063 ± .010
.050 Max.
.009 ± .004
.040 ± .005
(3.15 ± 0.25)
(1.60 ± 0.25)
(1.27)
(0.23 ± 0.10)
(1.02 ± 0.13)
220nF
100nF
47nF
22nF
10nF
4.7nF
2.2nF
1.0nF
470pF
VDC
(mm)
220pF
Inches
100pF
EIA / JDI
47pF
CASE SIZE
22pF
AVAILABLE CAPACITANCE
50
25
100
50
100
50
Please visit our website for additional product details and ordering information
www.johanson dielectrics.com
15
HIGH VOLTAGE AC POWER CERAMIC CAPACITORS
This capacitor series was developed for applications
requiring AC power handling. Because ceramic chips
have an MSL (moisture sensitivity level) of 1.0, they
exhibit far better lead-free solder reflow performance
than competing FILM caps. This series is also available
with Polyterm® flexible terminations which increases
their resistance to cracking from excessive PCB flexure.
APPLICATIONS
• Film Cap Replacement
TYPICAL POWER RATINGS VS CHIP SIZE
EIA Size
JDI Size
Rated Power
1206
R18
0.08 W
1210
S41
0.20 W
1812
S43
0.40 W
CASE SIZE
R18/1206
S41/1210
S43/1812
L
W
T
E/B
L
W
T
E/B
L
W
T
E/B
(mm)
.125 ±.010
.062 ±.010
.067 Max.
.020 ±.010
(3.17 ±.25)
(1.57 ±.25)
(1.70)
(0.51±.25)
.180 ±.010
.125 ±.010
.110 Max.
.025 ±.015
• Industrial Controls
RATED VOLTAGE
Inches
.125 ±.010
.095 ±.010
.080 Max.
.020 ±.010
• Florescent and HID Lighting Ballasts
(3.18 ±.25)
(2.41 ±.25)
(2.03)
(0.51±.25)
(4.57 ±.25)
(3.17 ±.25)
(2.80)
(0.64±.38)
DC
AC
• Networking
AVAILABLE CAPACITANCE
NPO Dielectric
Minimum
Maximum
-
250 VDC
141 Vrms
500 VDC
283 Vrms
10 pF
1500 pF
1000 pF
0.027 µF
0.010 µF
630 VDC
356 Vrms
10 pF
1200 pF
1000 pF
1000 VDC
566 Vrms
10 pF
1000 pF
100 pF
5600 pF
250 VDC
141 Vrms
-
1000 pF
0.120 µF
500 VDC
283 Vrms
10 pF
3900 pF
1000 pF
0.047 µF
-
630 VDC
356 Vrms
10 pF
2700 pF
1000 pF
0.027 µF
1000 VDC
566 Vrms
10 pF
1800 pF
100 pF
0.010 µF
250 VDC
141 Vrms
-
-
0.010 µF
0.220 uF
500 VDC
283 Vrms
100 pF
8200 pF
1000 pF
0.150 uF
630 VDC
356 Vrms
100 pF
6800 pF
1000 pF
0.100 µF
1000 VDC
566 Vrms
10 pF
5600 pF
1000 pF
0.022 µF
Please visit our website for additional product details and ordering information
16
X7R Dielectric
Minimum
Maximum
1000 pF
0.068 µF
www.johanson dielectrics.com
HIGH TEMPERATURE SURFACE MOUNT MLCCS 200°C
Johanson’s high temperature MLCC series exhibit stable performance across an extended operating temperature range of -55°C to
+200°C. Both Class I and Class II parts are available with DC voltage
ratings of 50,100 and 200V satisfying a wide range of demanding
applications.
FEATURES
APPLICATIONS
• Stable 200°C Operation
• Deep Hole Drilling Electronics
• Compact SMD Chip
• High Temperature Modules
• Polyterm® Termination Option
• Industrial Equipment
• Sn-Pb Termination Option
• Automotive
TEMPERATURE - VOLTAGE COEFFICIENT
ELECTRICAL CHARACTERISTICS
NPO
X7R
OPERATING RANGE:
-55 to +200°C
-55 to +200°C
TEMP. COEFFICIENT:
0±30ppm/°C
+15% -45%
DISSIPATION FACTOR:
0.001 (0.1%) max.
0.020 (2.0%) max.
AGING RATE:
INSULATION
RESISTANCE:
WITHSTANDING
VOLTAGE:
None
<1.0% per decade
25°C IR >100GΩ or 1000 ΩF whichever
200°C IR >10 ΩF or 100 ΩF is less
2.5 X WVDC for ratings ≤ 200 VDC
1.5 X WVDC for ratings 201-500 VDC
TEST CONDITIONS:
C > 100 pF; 1kHz ±50Hz; 1.0±0.2 VRMS
C ≤ 100 pF; 1Mhz ±50kHz; 1.0±0.2 VRMS
CASE SIZE
T14/0603
T15/0805
T18/1206
T41/1210
T43/1812
Inches
L
W
T
E/B
• Avionics
.063 ±.008
.032 ±.008
.035 Max.
.010±.005
(mm)
(1.60 ±.20)
(0.81 ±.20)
(0.89)
(.25±.13)
Rated
Voltage
50 VDC
X7R Temp. Only
X7R Temp. & Rated Voltage (100%)
NPO Temp. & Rated Voltage (100%)
NPO Dielectric
Minimum
Maximum
10 pF
330 pF
220 pF
X7R Dielectric
Minimum
Maximum
100 pF
0.010 pF
100 VDC
10 pF
100 pF
2200 pF
200 VDC
10 pF
120 pF
100 pF
5600 pF
50 VDC
10 pF
1500 pF
1000 pF
0.033 µF
L
W
T
E/B
.080 ±.010
.050 ±.010
.055 Max.
.020±.010
(2.03 ±.25)
(1.27 ±.25)
(1.40)
(0.51±.25 )
100 VDC
10 pF
1000 pF
1000 pF
0.010 µF
200 VDC
10 pF
680 pF
1000 pF
2200 pF
L
W
T
E/B
.125 ±.010
.062 ±.010
.067 Max.
.020±.010
(3.17 ±.25)
(1.57 ±.25)
(1.70)
(0.51±.25 )
50 VDC
10 pF
3300 pF
1000 pF
0.100 µF
100 VDC
1.0 pF
2200 pF
1000 pF
0.022 µF
200 VDC
1.0 pF
1500 pF
1000 pF
5600 pF
50 VDC
10 pF
5600 pF
0.047 µF
0.220 µF
100 VDC
10 pF
4700 pF
0.047 µF
0.056 µF
200 VDC
10 pF
3300 pF
0.047 µF
0.015 µF
50 VDC
1000 pF
0.012 µF
0.047 µF
0.470 µF
100 VDC
1000 pF
0.010 µF
0.047 µF
0.180 µF
200 VDC
1000 pF
8200 pF
0.047 µF
0.047 µF
L
W
T
E/B
L
W
T
E/B
.125 ±.010
.095 ±.010
.090 Max.
.020±.010
.175 ±.010
.125 ±.010
.110 Max.
.025±.015
(3.18 ±.25)
(2.41 ±.25)
(2.03)
(0.51±.25 )
(4.45 ±.25)
(3.17 ±.25)
(2.80)
(0.64±.38)
Please visit our website for additional product details and ordering information
www.johanson dielectrics.com
17
TANCERAM® CHIP CAPACITORS
TANCERAM® chip capacitors can replace tantalum capacitors
in many applications and offer several key advantages over
traditional tantalums. Because Tanceram® capacitors exhibit
extremely low ESR, equivalent circuit performance can often
be achieved using considerably lower capacitance values.
Low DC leakage reduces current drain, extending the battery
life of portable products. Tancerams® high DC breakdown
voltage ratings offer improved reliability and eliminate large
voltage de-rating common when designing with tantalums.
ADVANTAGES
• Low ESR
• Low DC Leakage
• Higher Surge Voltage
• Non-polarized Devices
• Reduced CHIP Size
• Improved Reliability
• Higher Insulation Resistance • Higher Ripple Current
APPLICATIONS
• Switching Power Supply Smoothing (Input/Output)
• Backlighting Inverters
• DC/DC Converter Smoothing (Input/Output)
• General Digital Circuits
Typical ESR Comparison
Typical Breakdown Voltage Comparison
10
100%
1.0 μF / 16V
Tantalum
75%
1
% Distribution
ESR (Ohms)
1.0 μF / 16V Tantalum
1.0 μF / 16V TANCERAM ®
0.1
50%
1.0 μF / 16V TANCERAM ®
25%
0.01
0.001
0%
0.01
0.1
1
10
100
0
100
HOW TO ORDER TANCERAM®
18
200
300
400
500
DC Breakdown Voltage
Frequency (MHz)
Part number written: 100R15X106MV4E
100
R15
X
106
M
V
4
E
VOLTAGE
SIZE
DIELECTRIC
CAPACITANCE
TOLERANCE
TERMINATION
MARKING
PACKING
6R3 = 6.3 V
100 = 10 V
160 = 16 V
250 = 25 V
500 = 50 V
101 = 100 V
See Chart
W = X7R
X = X5R
1st two digits are
significant; third digit
denotes number of
zeros.
105 = 1.00 µF
476 = 4.70 µF
107 = 10.0 µF
K = ±10%
M = ±20%
V = Nickel Barrier
with 100% Tin
Plating (Matte)
4 = Unmarked
T = SnPb*
(*available on
select parts)
www.johanson dielectrics.com
Code
Type Reel
E
Plastic 7”
T
Paper
7”
Tape specifications
conform to EIA RS481
TANCERAM® CHIP CAPACITORS
CASE SIZE
EIA / JDI
Inches
CAPACITANCE SELECTION
(mm)
VDC
0402
R07
L
W
T
EB
.040 ±.004
.020 ±.004
.025 Max.
.008 ±.004
(1.02 ±.10)
(0.51 ±.10)
(0.64)
(0.20±.10)
0603
R14
L
W
T
EB
.063 ±.008
.032 ±.008
.035 Max.
.010±.005
(1.60 ±.20)
(0.81 ±.20)
(0.89)
(.25±.13)
0805
R15
L
W
T
EB
.080 ±.010
.050 ±.010
.060 Max.
.020±.010
(2.03 ±.25)
(1.27 ±.25)
(1.52)
(0.51±.25 )
1206
R18
L
.125 ±.010
(3.17 ±.25)
W
.062 ±.010
(1.57 ±.25)
T
.070 Max.
(1.78)
EB .020 +.015-0.01 (0.51+.38-.25)
1210
S41
L
.125 ±.010
(3.18 ±.25)
W
.095 ±.010
(2.41 ±.25)
T
.110 Max.
(2.8)
EB .020 +.015-.010 (0.51+.38-.25)
1812
S43
L
W
T
EB
.175 ±.010
.125 ±.010
.140 Max.
.035 ±.020
(4.45 ±.25)
(3.17 ±.25)
(3.55)
(0.89 ±0.51)
1.0 µF
2.2 µF
3.3 µF
4.7 µF
10 µF
16
10
6.3
25
16
10
6.3
50
25
16
10
6.3
100
50
35
25
16
10
6.3
100
50
35
25
16
10
6.3
100
50
25
16
10
6.3
22 µF
DIELECTRIC
W (X7R)
47 µF
W
100 µF
L
T
E/B
X (X5R)
W
X
W
X
W
X
W
X
W
X
W
X
W
X
W
X
ELECTRICAL CHARACTERISTICS
Dielectric:
Temperature Coefficient:
Dissipation Factor:
Insulation Resistance (Min. @ 25°C, Wvdc)
Dielectric Strength:
Test Conditions:
Other:
X7R
X5R
±15% (-55 to +125°C)
±15% (-55 to +85°C)
For ≥ 50 VDC: 5% max.
For ≤ 25 VDC: 10% max.
For ≥ 50 VDC: 5% max.
For ≤ 25 VDC: 10% max.
100 ΩF or 10 GΩ, whichever is less
2.5 X WVDC, 25°C, 50mA max.
Capacitance values ≤ 22 µF: 1.0kHz±50Hz @ 1.0±0.2 Vrms
Capacitance values > 22 µF: 120Hz±10Hz @ 0.5V±0.1 Vrms
See page 35 for additional dielectric specifications.
www.johanson dielectrics.com
19
391
471
561
681
821
102
391
471
561
681
821
102
331
271
221
181
151
121
101
820
680
560
470
390
330
270
220
(0603)
180
0201
150
R05
120
mm
100
Inches
0R5
JDI
AVAILABLE CAPACITANCE CODE
XRX
CASE SIZE
Voltage
SURFACE MOUNT MLCCS 10 - 200 VDC
25V
L
W
T
EB
R07
.024
.012
.012
.006
±.001
±.001
±.001
±.002
(0.60 ±.03)
(0.30 ±.03)
(0.30 ±.03)
(0.15±.05)
0402
(1005)
.040 ±.004
.020 ±.004
.025 Max.
.008 ±.004
(1.02 ±.10)
(0.51 ±.10)
(0.64)
(0.20±.10)
0603
(1608)
.063 ±.008
.032 ±.008
.035 Max.
.010±.005
(1.60 ±.20)
(0.81 ±.20)
(0.89)
(.25±.13)
0805
(2012)
.080 ±.010
.050 ±.010
.050 Max.
.020±.010
(2.03 ±.25)
(1.27 ±.25)
(1.27)
(0.51±.25 )
1206
(3216)
16V
10V
50V
L
W
T
EB
R14
25V
16V
10V
200V
100V
L
W
T
EB
R15
50V
25V
16V
200V
100V
L
W
T
EB
R18
50V
25V
16V
200V
100V
L .125 ±.010
W .062 ±.010
T .050 Max.
EB .020 ±.010
S41
1210
(3.17 ±.25)
(1.57 ±.25)
(1.27)
(0.51 ±.25)
(3224)
50V
25V
16V
200V
100V
20
L
T
200V
E/B
100V
NPO
50V
X7R
25V
X5R
www.johanson dielectrics.com
331
271
221
181
151
121
101
820
680
560
470
390
330
270
220
180
16V
150
(4.45 ±.25)
(3.17 ±.25)
(2.16)
(0.64 ±.38)
W
16V
0R5
L .175 ±.010
W .125 ±.010
T .085 Max.
EB .025 ±.015
(4532)
25V
120
1812
50V
100
S43
(3.18 ±.25)
(2.41 ±.25)
(1.65)
(0.51 ±.25)
XRX
L .125 ±.010
W .095 ±.010
T .065 Max.
EB .020 ±.010
107
476
106
475
335
225
105
474
334
224
104
823
683
563
473
333
273
223
183
153
123
103
822
562
472
392
332
272
222
182
152
122
AVAILABLE CAPACITANCE CODE
Voltage
SURFACE MOUNT MLCCS 10 - 200 VDC
NPO
25V
X7R
16V
X5R
10V
50V
25V
16V
CASE
SIZE
0201
R05
0402
R07
10V
200V
See Tanceram High
Capacitance Series
for values ≥ 1.0µF
100V
50V
25V
0603
R14
16V
200V
See Tanceram High
Capacitance Series
for values ≥ 1.0µF
100V
50V
25V
0805
R15
16V
200V
See Tanceram High
Capacitance Series
for values ≥ 1.0µF
100V
50V
25V
1206
R18
16V
200V
See Tanceram High
Capacitance Series
for values ≥ 1.0µF
100V
50V
25V
1210
S41
16V
200V
See Tanceram High
Capacitance Series
for values ≥ 1.0µF
100V
50V
25V
1812
S43
www.johanson dielectrics.com
107
476
106
475
335
225
105
474
334
224
104
823
683
563
473
333
273
223
183
153
123
103
822
562
472
392
332
272
222
182
152
122
16V
21
STACKED SMPS CERAMIC CAPACITORS
Switch-Mode ceramic capacitors feature large capacitance
values and exhibit low ESR (equivalent series resistance) and
low ESL (equivalent series inductance) making them well suited
for high power and high frequency applications where tantalum
or aluminum electrolytic capacitors may not be suitable. The
P-Series feature mechanical and pin-out configurations per
DSCC 87106 and 88011 drawings while the E-Series feature
mechanical and pin-out configurations more common in
European design applications.
KEY FEATURES
• P-Series Approved to DSCC Drawings 87106 & 88011
MIL-PRF-49470
• New T-Series 200°C for downhole tools and aircraft engine
control applications.
• E-Series Common European Lead Styles available to
MIL-PRF-49470 requirements.
• NPO & X7R Dielectrics, 50 to 500 VDC Ratings
• Low ESR / Low ESL, Ideal for SMPS Filtering Applications
• Custom Sizes, Voltages, and Values Available
CASE SIZE
Straight Lead
L-Lead
J-Lead
E
D
.070" ± .010
B A
F
.250" MIN
.055" ± .010
.010" ± .002
C
.020" ± .002
.100" MAX
.025" MIN
.100" TYP
HOW TO ORDER STACKED SMPS
Part number written: 201P03W275KJ4H
201
P03
W
275
K
J
4
H
VOLTAGE
SIZE
DIELECTRIC
CAPACITANCE
TOLERANCE
TERMINATION
MARKING
PACKING
See Chart
N = NPO
B = BX
W = X7R
J = “J” Leads
(formed in)
L = “L” Leads
(formed out)
M = “L” Leads with
reduced height of
.045” +/- .010”
N = Straight Lead
4 = Standard
3 = Specified
500
101
201
501
22
.050" min
.050" min
=
=
=
=
50 V
100 V
200 V
500 V
1st two digits are
J = ±5%
significant; third digit
K= ±10%
denotes number of
L = ±15%
zeros.
M = ±20%
101 = 100 pF
N = ±30%
102 = 1000 pF
Z = +80% -20%
103 = 0.01 µF
P = +100% -0%
105 = 1.00 µF
www.johanson dielectrics.com
T = Tape and Reel
H = High Reliability
testing per customer
requirements
S = Special Part
STACKED SMPS CERAMIC CAPACITORS
P-SERIES DSCC STYLE X7R CAPACITANCE / VOLTAGE SELECTION
CASE
SIZE
NO.
CHIPS
P05
1
P55
5
P04
1
P54
5
P03
1
P53
5
P01
1
P51
5
P02
1
P52
5
P06
1
P56
5
LEADS
/SIDE
3
4
10
20
Mechanical Size Range (In.)
Length (D)
0.275
Width (E)
0.300
0.425
0.440
1.075
0.500
2.075
0.500
15
1.535
0.870
20
2.075
1.350
X7R Max Capacitance (µF)
Tmax (B)
100V
200V
500V
.185
50V
3.0
2.2
1.0
0.50
.715
15
11
5.0
2.5
.185
9.0
6.5
3.0
1.5
.715
45
32
15
7.5
.185
28
20
9.5
4.7
.715
140
100
47
23
.185
50
40
19
9.4
.715
250
200
95
46
.185
75
55
25
14
.715
370
270
125
70
.185
160
110
50
25
.715
800
550
250
125
Partial product line listing, please refer to our website for complete offering including NPO & BX capacitance ranges. .
NEW 200°C T-SERIES CAPACITANCE / VOLTAGE SELECTION
CASE
SIZE
NO.
CHIPS
T05
1
T55
5
T04
1
T54
5
T03
1
T53
5
LEADS
/SIDE
Mechanical Size Range (In.)
Length (D)
Width (E)
3
0.275
0.300
4
0.425
0.440
10
1.075
0.500
Max Capacitance (µF)
Tmax (B)
50V
100V
.185
1.20
0.68
200V
0.33
.715
5.60
3.30
1.50
.185
2.70
1.50
0.82
.715
15.0
8.20
3.90
.185
10.0
5.60
2.70
.715
47.0
27.0
12.0
Partial product line listing, please refer to our website for complete offering including NPO capacitance ranges.
E-SERIES EUROPEAN STYLE X7R CAPACITANCE / VOLTAGE SELECTION
CASE
SIZE
NO.
CHIPS
E24
1
E54
4
E26
1
E56
4
E21
1
E51
4
E28
1
E58
4
E29
1
E59
4
LEADS
/SIDE
Mechanical Size Range (mm)
Length (D)
Width (E)
3
8.7
9.2
5
13.6
14.9
6
16.6
21.6
14
38.2
12.0
14
40.6
24.0
X7R Max Capacitance (µF)
Tmax (B)
50V
100V
200V
500V
3.8
5.0
4.0
2.5
1.0
14.8
20
16
10
4.0
3.
16
12
7.5
3.3
14.8
64
48
30
13
6.0
3.8
30
22
14
14.8
120
88
56
24
3.8
35
25
16
7.0
14.8
140
100
64
28
3.8
75
50
35
16
14.8
300
200
140
64
Partial product line listing, please refer to our website for complete offering including NPO & BX capacitance ranges.
www.johanson dielectrics.com
23
MINI-SWITCH MODE® CAPACITORS
JDI’s Mini-Switch Mode® ceramic capacitors combine the
advantages of high capacitance found in tantalum capacitors
with very low ESR performance of ceramic capacitors. The “J”
and “L” lead configurations replace 1825 and 2225 SMT chips
to provide stress relief and prevent cracking due to thermal
cycling or mechanical board flexing. Another plus of the J-lead
style is that this configuration allows use of the same solder
lands as the SMT chips. See the Switch-Mode section for
larger values. See also the Technical Notes on soldering and
handling and suggested solder lands.
FEATURES
• High Capacitance, Small SIze
• Low ESR/ESL
• Leadframe reduces thermal & mechanical stress due to
board flexure and TCE mismatch
APPLICATIONS
• DC-DC Converters
• Power Supply Input & Output Filters
CAPACITANCE SELECTION
24
NPO Max Capacitance (uF)
X7R Max Capacitance (uF)
SIZE
CODE
EIA CHIP
SIZE
25V
50V
100V
200V
500V
25V
50V
100V
200V
500V
P09
1825
0.056
0.047
0.039
0.027
0.018
1.5
1.2
0.75
0.56
0.27
P29
1825
0.11
0.094
0.078
0.054
0.036
3.0
2.4
1.5
1.1
0.54
P39
1825
0.16
0.14
0.11
0.081
0.054
4.5
3.6
2.2
1.6
0.81
P49
1825
0.22
0.18
0.15
0.10
0.07
6.0
4.8
3.0
2.2
1.0
P08
2225
0.068
0.056
0.047
0.033
0.027
2.7
2.2
1.5
1.2
0.39
P28
2225
0.13
0.11
0.094
0.066
0.054
5.4
4.4
3.0
2.4
0.78
P38
2225
0.20
0.16
0.14
0.10
0.081
8.1
6.6
4.5
3.6
1.1
P48
2225
0.27
0.22
0.18
0.13
0.10
10
8.8
6.0
4.8
1.5
www.johanson dielectrics.com
MINI-SWITCH MODE® CAPACITORS
CASE SIZE
Dimensions Applicable
to all sizes:
In.
h ± .010 .070
L
W
mm
L
W
L
W
1.78
T
W
T
T
.100
2.54
p ± .015 .065
c Typ.
1.65
T
h
h
h
h
c
p
L
c
P08
Dimensions Applicable
to specific sizes:
In.
mm
P09
P28
c
c
p
p
p
P29
P38
P39
P48
P49
In.
mm
In.
mm
In.
mm
In.
mm
In.
mm
In.
mm
In.
mm
L max
.280
7.11
0.24
6.1
0.28
7.11
0.24
6.1
0.28
7.11
0.24
6.1
0.28
7.11
0.24
6.1
W max
.270
6.86
0.27
6.86
0.27
6.86
0.27
6.86
0.27
6.86
0.27
6.86
0.27
6.86
0.27
6.86
T max
.095
2.41 0.095 2.41
0.19
4.83
0.19
4.83 0.285 7.24 0.285 7.24
380
9.65
380
9.65
Note: J-Lead and L-Lead options are available on all sizes above
ELECTRICAL CHARACTERISTICS
NPO
X7R
0 ±30ppm/°C (-55 to +125°C)
±15% (-55 to +125°C)
0.1% max.
2.5% max.
None
-2.5% per decade hour
1000 ΩF or 100 GΩ, whichever is less
500 ΩF or 50 GΩ, whichever is less
Dielectric:
Temperature Coefficient:
Dissipation Factor:
Aging
Insulation Resistance (Min. @ 25°C, WVDC)
For 500V Ratings: 750VDC, 25ºC, 50mA max
For 200V Ratings: 2xWVDC, 25ºC, 50mA max
For 25-100V Ratings: 2.5xWVDC, 25ºC, 50mA max
Dielectric Strength:
1kHz ±50Hz;1.0±0.2 VRMS
Test Conditions:
Other:
See page 35 for additional dielectric specifications.
HOW TO ORDER - MINI-SWITCH MODE®
Part number written: 500P28W395KJ4U
500
P28
W
395
K
J
4
U
VOLTAGE
SIZE
DIELECTRIC
CAPACITANCE
TOLERANCE
TERMINATION
MARKING
PACKING
See Chart
N = NPO
W = X7R
J = “J” Leads
(formed in)
L = “L” Leads
(formed out)
4 = Unmarked
U = Tape and Reel
16mm, 13” Reel
NONE = Bulk pack
H = High Reliability
testing per customer requirements
S = Special Part
250
500
101
201
501
=
=
=
=
=
25 V
50 V
100 V
200 V
500 V
1st two digits are
J = ±5%
significant; third digit
K= ±10%
denotes number of
M = ±20%
zeros.
Z = +80% -20%
103 = 0.01 µF
105 = 1.0 µF
106 = 10 uF
www.johanson dielectrics.com
25
MAXI-CAP TM STACKED CAPACITORS
TM
Johanson Dielectrics Maxi-cap Series of ultra high capacitance stacked ceramic capacitors exhibit very low ESR/ESL
for high current handling capability in small sizes. The J lead
configuration provides good mechanical and thermal stress
performance and is similar to the leadframe used in high-rel
applications. In addition the J-lead configuration allows direct
substitution of SMT chip footprints. The standard range is offered in 1 and 2 chip horizontal stacks giving potential board
space savings.
FEATURES
• High Capacitance, Small SIze
• Low ESR/ESL
• Leadframe reduces thermal & mechanical stress due to
board flexure and TCE mismatch
• Green / ROHS Compliant
APPLICATIONS
• DC-DC Converters
• Power Supply Input & Output Filters
AVAILABLE CAPACITANCE (X7R DIELECTRIC)
RATED DC VOLTAGE
P0A
P07
P2A
P27
50V
4.7 µF
10 µF
10 µF
22 µF
100V
2.2 µF
4.7 µF
4.7 µF
10 µF
Dimensions Applicable
to specific sizes:
P0A
P07
P2A
P27
In.
mm
In.
mm
In.
mm
In.
mm
L Max
0.217
5.5
0.256
6.5
0.217
5.5
0.256
6.5
W Max
0.157
4.0
0.217
5.5
0.157
4.0
0.217
5.5
H Max
0.118
3.0
0.118
3.0
0.236
6.0
0.236
6.0
CASE SIZE
Dimensions Applicable
to all sizes:
In.
mm
h1 Max
.059
1.50
c Typ.
.100
2.54
p1 Typ.
.020
0.50
p2 ± 0.02
26
W
.065
1.65
W
H
H
h1
h1
p1
L
p2
c
p1
www.johanson dielectrics.com
L
p2
c
MAXI-CAP TM STACKED CAPACITORS
TYPICAL APPLICATION:
DC-DC Converter Input & Output Filtering
Input Filter
Capacitor
Output Filter
Capacitor
Controller
ELECTRICAL CHARACTERISTICS
OPERATING RANGE:
-55 to +125°C
TEMPERATURE COEFFICIENT:
X7R, ±15%
DISSIPATION FACTOR:
0.020 (2.0%) max.
AGING RATE:
<2.5% per decade
25°C IR >100GΩ or 1000 ΩF
INSULATION RESISTANCE:
whichever is less
WITHSTANDING VOLTAGE:
2.5 X WVDC for 50 VDC
2.0 X WVDC for 100 VDC
TEST CONDITIONS:
1kHz ±50Hz; 1.0±0.2 VRMS, 25°C
HOW TO ORDER - MAXI-CAP TM
500
P07
W
VOLTAGE
500 = 50 V
101 = 100 V
SIZE
See Chart
DIELECTRIC
W = X7R
Part number written: 500P07W106MJ4U+RC
106
M
CAPACITANCE TOLERANCE
1st two digits are
M = ±20%
significant; third digit
denotes number of
zeros.
225 = 2.2 µF
106 = 10 uF
J
4
U
TERMINATION MARKING
PACKING
J = “J” Leads
4 = Unmarked U = Embossed
(formed in)
Tape 13” Reel per
EIA RS481
www.johanson dielectrics.com
+RC
ROHS CODE
+RC = RoHS
Compliant
27
X2Y® SWITCH-MODE CERAMIC CAPACITORS
JDI’s new X2Y® Technology Switch-Mode ceramic capacitors
exhibit significantly lower ESL making them ideally suited
for applications where high frequency filtering performance
is critical. Lower ESL performance translates to significant
size and weight reduction because lower capacitance values
perform as well or better
KEY FEATURES
• Low ESR / Low ESL, Ideal for SMPS Filtering Applications
• Same Package Size as DSCC Drawings 87106 & 88011
MIL-PRF-49470
• NPO & X7R Dielectrics, 50 to 500 VDC Ratings
• Custom Sizes, Voltages, and Values Available
CAPACITANCE / VOLTAGE SELECTION
Rated DC
Voltage
28
Maximum X7R Capacitance Per Case Size (µF)
Y05
Y25
Y35
Y45
Y55
Y04
Y24
Y34
Y44
Y54
Y03
Y23
Y33
Y43
Y53
50V
2.7
5.0
8.0
11
14
8.3
17
25
33
41
29
58
87
116
145
100V
2.0
4.0
6.0
8.0
10
6.0
12
17
24
29
21
41
62
83
104
200V
0.9
1.8
2.7
4.0
5.0
2.8
5.5
8.3
11
14
9.8
20
29
39
49
500V
0.5
0.9
1.4
1.8
2.3
1.4
2.8
4.1
5.5
6.9
4.9
9.7
14
19
24
www.johanson dielectrics.com
X2Y® SWITCH-MODE CERAMIC CAPACITORS
A
A
Signal
(Power)
G
G
B
A
G
B
A
G
B
G
B
Return
(Ground)
Top View
Contact the factory for additional connection options for dual signal line EMI filtering applications.
CASE SIZE
CASE SIZES
Y05
Y25
Y35
Y45
Y55
Y04
Y24
Y34
Y44
Y54
Y03
Y23
Y33
Y43
Y53
A
.120
.240
.360
.480
.650
.120
.240
.360
.480
.650
.120
.240
.360
.480
.650
B
.185
.305
.425
.545
.715
.185
.305
.425
.545
.715
.185
.305
.425
.545
.715
C
.250
.400
.450
D-
.224
.350
.950
D+
.275
.425
1.075
E
.300
.440
.500
Pins
3 per side, configuration:
a = 1, b = 1, g = 1
5 per side, configuration
a = 1, b = 1, g = 3
10 per side, configuration
a = 3, b = 3, g = 4
All dimensions are in Inches. Tolerances are maximum except: C = ±.025” D- = minimum, D+ = maximum, F = minimum
D
E
0.020" Min.
Straight Lead
L-Lead
B A
0.055"
± 0.010
J-Lead
.070" ± .010
.050" min
.050" min
F
0.250" MIN
.010" ± .002
C
0.020" ± .002
0.100" MAX
0 025" MIN
0.100" TYP
HOW TO ORDER - X2Y® SMPS
201
VOLTAGE
500
101
201
501
=
=
=
=
50 V
100 V
200 V
500 V
Part number written: 201Y03W475KJ4H
Y03
W
475
M
J
SIZE
DIELECTRIC
CAPACITANCE
TOLERANCE
TERMINATION
MARKING
See Chart
W = X7R
1st two digits are
significant; third digit
denotes number of
zeros.
M = ±20%
J = “J” Leads
(formed in)
L = “L” Leads
(formed out)
N = Straight Lead
4 = Standard
3 = Specified
104 = 0.10 µF
105 = 1.00 µF
475 = 4.70 µF
www.johanson dielectrics.com
4
H
PACKING
T = Tape and Reel
H = High Reliability
testing per customer
requirements
S = Special Part
29
SWITCH-MODE RADIAL LEADED CAPACITORS
KEY FEATURES
• Rated Working Voltages from 25 to 500 VDC
• Rugged Epoxy Coating Offers Increased Protection
• Hi-Rel Screened Versions Available
• Custom Sizes, Voltages, and Values Available
ADVANTAGES
CASE SIZE
• Power Supplies
• Surge Protection
• Voltage Multipliers
• Industrial Control Circuits
• Data Isolation
• Custom Applications
RATED
VOLTAGE
In.
(mm)
.300 max.
.300 max.
.200 max.
.200 nom.
.020 nom.
(7.62 max.)
(7.62 max.)
(5.08 max.)
(5.08 nom.)
(.510 nom.)
25 VDC
H03
H04
H05
H06
30
W
H
T
S
Ld
W
H
T
S
Ld
W
H
T
S
Ld
W
H
T
S
Ld
.400 max.
.400 max.
.200 max.
.200 nom.
.020 nom.
.500 max.
.500 max.
.200 max.
.400 nom.
.025 nom.
.870 max.
.600 max.
.200 max.
.790 nom.
.032 nom.
(10.2 max.)
(10.2 max.)
(5.08 max.)
(5.08 nom.)
(.510 nom.)
(12.7 max.)
(12.7 max.)
(5.08 max.)
(10.2 nom.)
(.635 nom.)
(22.1 max.)
(15.2 max.)
(5.08 max.)
(20.1 nom.)
(.813 nom.)
NPO CAPACITANCE (MAX.)
.070 µF
703
X7R CAPACITANCE (MAX.)
2.00 µF
205
50 VDC
.060 µF
603
1.60 µF
165
100 VDC
.050 µF
503
1.10 µF
115
200 VDC
.040 µF
403
.730 µF
734
500 VDC
.020 µF
203
.250 µF
254
25 VDC
.120 µF
124
5.10 µF
515
50 VDC
.100 µF
104
4.10 µF
415
100 VDC
.082 µF
823
2.70 µF
275
200 VDC
.050 µF
503
1.80 µF
185
500 VDC
.030 µF
303
.670 µF
674
25 VDC
.240 µF
244
8.70 µF
875
50 VDC
.200 µF
204
7.20 µF
725
100 VDC
.180 µF
184
4.80 µF
485
200 VDC
.110 µF
114
3.30 µF
335
500 VDC
.070 µF
703
1.10 µF
115
25 VDC
.750 µF
754
22.0 µF
226
50 VDC
.620 µF
624
17.0 µF
176
100 VDC
.560 µF
564
13.0 µF
136
200 VDC
.360 µF
364
8.00 µF
805
500 VDC
.240 µF
244
2.90 µF
295
www.johanson dielectrics.com
SWITCH-MODE RADIAL LEADED CAPACITORS
CASE SIZE
RATED
VOLTAGE
In.
(mm)
1.10 max.
.600 max.
.200 max.
.980 nom.
.032 nom.
(27.9 max.)
(15.2 max.)
(5.08 max.)
(24.9 nom.)
(.813 nom.)
NPO CAPACITANCE (MAX.)
25 VDC
W
H
T
S
Ld
H07
W
H
T
S
Ld
H08
W
H
T
S
Ld
H09
W
H
T
S
Ld
H10
W
1.10 max.
.600 max.
.350 max.
.980 nom.
.032 nom.
.670 max.
.540 max.
.200 max.
.575 nom.
.025 nom.
.930 max.
.720 max.
.250 max.
.800 nom.
.032 nom.
(27.9 max.)
(15.2 max.)
(8.89 max.)
(24.9 nom.)
(.813 nom.)
(17 max.)
(13.7 max.)
(5.08 max.)
(14.6 nom.)
(.635 nom.)
(23.6 max.)
(18.3 max.)
(6.35 max.)
(20.3 nom.)
(.813 nom.)
.680 µF
684
X7R CAPACITANCE (MAX.)
35.0 µF
50 VDC
.560 µF
564
28.0 µF
286
100 VDC
.470 µF
474
19.0 µF
196
200 VDC
.330 µF
334
13.0 µF
136
500 VDC
.200 µF
204
4.60 µF
465
25 VDC
1.20 µF
125
70.0 µF
706
50 VDC
1.10 µF
115
56.0 µF
566
100 VDC
.820 µF
824
37.0 µF
376
200 VDC
.470 µF
474
26.0 µF
266
500 VDC
.300 µF
304
8.70 µF
875
25 VDC
.450 µF
454
13.0 µF
136
50 VDC
.360 µF
364
10.0 µF
106
100 VDC
.330 µF
334
7.20 µF
725
200 VDC
.240 µF
244
5.00 µF
505
500 VDC
.180 µF
184
1.70 µF
175
25 VDC
1.00 µF
105
38.0 µF
386
50 VDC
.900 µF
904
30.0 µF
306
100 VDC
.750 µF
754
20.0 µF
206
200 VDC
.470 µF
474
14.0 µF
146
500 VDC
.300 µF
304
5.80 µF
585
T
NOTE: Lead lengths are typically 1.25” for orders in bulk packaging. Leads are typically
1.00” for tape and reel packaging. Tape and reel packaging comes in 1000 piece reels.
H
S
Meniscus
Height
.050" Max
HOW TO ORDER SWITCH-MODE RADIALS
Part number written: 201H07W105KQ4
201
H07
W
105
K
Q
4
VOLTAGE
SIZE
DIELECTRIC
CAPACITANCE
TOLERANCE
TERMINATION
MARKING
See Chart
N = NPO
W = X7R
1st two digits are
significant; third digit
denotes number of
zeros.
101 = 100 pF
102 = 1000 pF
103 = 0.01 µF
105 = 1.00 µF
Q = Leaded &
Encapsulated
4 = Standard
3 = Specified
250
500
101
201
501
=
=
=
=
=
356
25 V
50 V
100 V
200 V
500 V
J
K
M
Z
= ± 5%
= ± 10%
= ± 20%
= +80%
-20%
www.johanson dielectrics.com
PACKING
T = Tape and Reel
H = High Rel
Testing per customer
requirements
S = Special Part
31
HIGH VOLTAGE RADIAL LEADED CAPACITORS
KEY FEATURES
• Rated Working Voltages from 25 to 500 VDC
• Rugged Epoxy Coating Offers Increased Protection
• Compact MLC Designs Smaller Than Film or Disc
• NEW 200°C & 250°C Versions Available for Oil &
Geophysical Tool, Aircraft Engine Control Applications
• DSCC Drawing & Other Screened Versions Available
ADVANTAGES
CASE SIZE
In.
H42
H47
H51
H62
H66
32
• Power Supplies
• Surge Protection
• Voltage Multipliers
• Industrial Control Circuits
• Data Isolation
• Custom Applications
RATED
VOLTAGE
(mm)
W 0.250 Max
H 0.220 Max
T 0.270 Max
S 0.170 ±0.03
Ld 0.025 ±.002
(6.35 Max)
(5.59 Max)
(6.86 Max)
(4.32 ±0.76)
(0.64 ±0.05)
W 0.370 Max
H 0.300 Max
T 0.270 Max
S 0.275 ±0.03
Ld 0.025 ±.002
(9.40 Max)
(7.62 Max)
(6.86 Max)
(6.99 ±0.76)
(0.64 ±0.05)
W 0.470 Max
H 0.400 Max
T 0.320 Max
S 0.375 ±0.03
Ld 0.025 ±.002
(12.0 Max)
(10.2 Max)
(8.13 Max)
(9.53 ±0.76)
(0.64 ±0.05)
W 0.570 Max
H 0.500 Max
T 0.320 Max
S 0.475 ±0.03
Ld 0.025 ±.002
(14.5 Max)
(12.7 Max)
(8.13 Max)
(12.1 ±0.76)
(0.64 ±0.05)
W 0.670 Max
H 0.600 Max
T 0.320 Max
S 0.575 ±0.03
Ld 0.025 ±.002
(17.0 Max)
(15.2 Max)
(8.13 Max)
(14.6 ±0.76)
(0.64 ±0.05)
500 VDC
1000 VDC
2000 VDC
3000 VDC
4000 VDC
5000 VDC
500 VDC
1000 VDC
2000 VDC
3000 VDC
4000 VDC
5000 VDC
500 VDC
1000 VDC
2000 VDC
3000 VDC
4000 VDC
5000 VDC
500 VDC
1000 VDC
2000 VDC
3000 VDC
4000 VDC
5000 VDC
500 VDC
1000 VDC
2000 VDC
3000 VDC
4000 VDC
5000 VDC
NPO CAPACITANCE (MAX.)
4700 pF
1500 pF
680 pF
330 pF
150 pF
100 pF
.022 µF
3300 pF
1500 pF
680 pF
330 pF
220 pF
.056 µF
4700 pF
3300 pF
1500 pF
1000 pF
470 pF
.100 µF
.010 µF
6800 pF
3300 pF
2200 pF
1000 pF
.150 µF
.015 µF
.010 µF
4700 pF
3300 pF
2200 pF
472
152
681
331
151
101
223
332
152
681
331
221
563
472
332
152
102
471
104
103
682
332
222
102
154
153
103
472
332
222
X7R CAPACITANCE (MAX.)
.150 µF
.055 µF
9000 pF
2800 pF
630 pF
550 pF
.480 µF
.170 µF
.025 µF
.011 µF
1800 pF
940 pF
1.20 µF
.450 µF
.094 µF
.043 µF
.010 µF
4900 pF
2.20 µF
.804 µF
.240 µF
.073 µF
.028 µF
.013 µF
3.30 µF
1.20 µF
.440 µF
.013 µF
.041 µF
.020 µF
www.johanson dielectrics.com
154
553
902
282
631
531
484
174
253
113
182
941
125
454
943
433
103
492
225
804
244
733
283
133
335
125
444
134
413
203
HIGH VOLTAGE RADIAL LEADED CAPACITORS
CASE SIZE
In.
H70
H72
H80
NPO CAPACITANCE (MAX.)
RATED
VOLTAGE
(mm)
W 0.770 Max
H 0.720 Max
T 0.320 Max
S 0.675 ±0.03
Ld 0.025 ±.002
(19.6 Max)
(18.3 Max)
(8.13 Max)
(17.1 ±0.76)
(0.64 ±0.05)
W 0.870 Max
H 0.750 Max
T 0.320 Max
S 0.775 ±0.03
Ld 0.025 ±.002
(22.1 Max)
(19.1 Max)
(8.13 Max)
(19.7 ±0.76)
(0.64 ±0.05)
W 1.450 Max
H 0.720 Max
T 0.320 Max
S 1.375 ±0.03
Ld 0.025 ±.002
(36.8 Max)
(18.3 Max)
(8.13 Max)
(34.9 ±0.76)
(.064 ±0.05)
500 VDC
1000 VDC
2000 VDC
3000 VDC
4000 VDC
5000 VDC
500 VDC
1000 VDC
2000 VDC
3000 VDC
4000 VDC
5000 VDC
500 VDC
1000 VDC
2000 VDC
3000 VDC
4000 VDC
5000 VDC
.220 µF
.022 µF
.015 µF
6800 pF
4700 pF
3300 pF
.330 µF
.100 µF
.056 µF
.033 µF
.010 µF
6800 pF
.470 µF
.150 µF
.082 µF
.047 µF
.015 µF
.010 µF
224
223
153
682
472
332
334
104
563
333
103
682
474
154
823
473
153
103
X7R CAPACITANCE (MAX.)
5.70 µF
2.10 µF
.620 µF
.190 µF
.054 µF
.026 µF
7.30 µF
2.80 µF
.800 µF
.250 µF
.080 µF
.041 µF
12.0 µF
4.60 µF
1.20 µF
.390 µF
.130 µF
.068 µF
575
215
624
194
543
263
735
285
804
254
803
413
126
465
125
394
134
683
T-SERIES 200°C & 250°C
Johanson also offers two different series of high temperature radial leaded
capacitors for 200°C and 250°C. These components feature rugged premolded cases with Hi-Temp epoxy fill. The 200°C line is offered in voltage
ratings of 25V to 4KV and maximum capacitance loss of -0.5% in NPO and
-45% in X7R. The 250°C line is offered in voltage ratings of 50V & 100V with
maximum capacitance loss of -1.5% in NPO and -55% in X7R. Please visit
our website for complete component selection & specifications
W
H
S
APPLICATIONS
• Geophysical Probes
• Jet Engine Controls
HOW TO ORDER HIGH VOLTAGE RADIALS
Part number written: 102H42W101KQ4
102
H42
W
101
K
Q
4
VOLTAGE
SIZE
DIELECTRIC
CAPACITANCE
TOLERANCE
TERMINATION
MARKING
See Chart
N = NPO
W = X7R
1st two digits are
significant; third digit
denotes number of
zeros.
102 = 1000 pF
103 = 0.01 µF
105 = 1.00 µF
Q = Leaded &
Encapsulated
4 = Standard
3 = Specified
=
=
=
=
=
=
500 V
1000 V
2000 V
3000 V
4000 V
5000 V*
Meniscus
Height
.050" Max
NOTE: Lead lengths are
typically 1.25” for orders
in bulk packaging. Leads
are typically 1.00” for tape
and reel packaging. Tape
and reel packaging comes
in 1000 piece reels.
• Oil Well Logging (Downhole)
501
102
202
302
402
502
T
J
K
M
Z
= ± 5%
= ± 10%
= ± 20%
= +80%
-20%
www.johanson dielectrics.com
PACKING
T = Tape and Reel
H = High Rel
Testing per customer
requirements
S = Special Part
33
CAPACITOR PACKAGING
Johanson capacitors are available taped per
EIA standard 481. Tape options include 7” and
13” diameter reels. Johanson uses high quality,
dust free, punched 8mm paper tape and plastic
embossed 8mm tape for thicker MLCCs. Quantity
per reel ranges are listed in the tables below and are
dependent on chip thickness.
Feed Direction
Embossed Tape
.083 max.
(2.1)
Punched Tape
8mm Width; 4mm or 2mm Pitch
.059+.004-0.0
(1.5+0.1-0.0)
.157±.004
(4.0±0.1)
Sproket Holes
.012±.004
(0.3±0.1)
.067±.004
(1.7±0.1)
.055
max.(1.2)
.138±.002
(3.5±0.05)
.079±.020
(2.0±0.5)
Width
.315±.008
(8.0±0.2)
Bo
Ao
.083±.020
(21±0.5)
E
4
JV
00
N1
07 9
0R 99
50 0-9 6
01 345 678
N
F0 O12
P/ t #
Lo O. # # M
S. .O.
M
1.97 min.
(50.0)
Cover Tape
.510±.020
(13±0.5)
Pitch = .157±.004 (4.0±0.1)
or .079±.004 (2.0±0.1)
Embossed Tape
.012±.004
(0.3±0.1)
.098 max.
(2.5)
.079±.002
(2.0±0.05)
Cover Tape
12mm Width; 8mm or 4mm Pitch
.059+.004-0.0
(1.5+0.1-0.0)
Sproket Holes .157±.004
(4.0±0.1)
Ao
Punched Tape
.067±.004
(1.7±0.1)
.220±.004
(5.5±0.1)
Bo
7.0±.079 or 13.0±.079
(178±2.0)
(330±2.0)
Pitch = .314±.004 (8.0±0.1)
or .157±.004 (4.0±0.1)
.33+.059-0.0 or .488+.078-0.0
(8.4+1.5-0.0)
(12.4+2.0-0.0)
7” DIAMETER REEL
COMPONENT
.079±.002
(2.0±0.05)
13” DIAMETER REEL
REEL QTY
TAPE TYPE
WIDTH / PITCH
CODE
REEL QTY
TAPE TYPE
R05 / 0201 MLCC
15000
Paper
8mm/2mm
T
N/A
N/A
R07 / 0402 MLCC
10000
Paper
8mm/2mm
T
N/A
N/A
R14 / 0603 MLCC
4000
Paper
8mm/4mm
T
10000
Paper
8mm/4mm
R
R15 / 0805 MLCC
4000 / 3000
Paper / Embossed
8mm/4mm
T/E
10000
Paper / Embossed
8mm/4mm
R/U
R18 / 1206 MLCC
4000 / 3000
Paper / Embossed
8mm/4mm
T/E
10000
Paper / Embossed
8mm/4mm
R/U
S41 / 1210 MLCC
2000 - 4000
Embossed
8mm/4mm
E
5000-10000
Embossed
8mm/4mm
U
R29 / 1808 MLCC
2000
Embossed
12mm/4mm
E
5000 - 8000
Embossed
12mm/4mm
U
R30 / 2211 MLCC
1000 - 2000
Embossed
12mm/4mm
E
2000 - 5000
Embossed
12mm/4mm
U
S43 / 1812 MLCC
500 - 1000
Embossed
12mm/8mm
E
3000 - 5000
Embossed
12mm/8mm
U
S47 / 2220 MLCC
250 - 1000
Embossed
12mm/8mm
E
2000 - 5000
Embossed
12mm/8mm
U
S49 / 1825 MLCC
250 - 1000
Embossed
12mm/8mm
E
2000 - 4000
Embossed
12mm/8mm
U
S48 / 2225 MLCC
250 - 1000
Embossed
12mm/8mm
E
2000 - 4000
Embossed
12mm/8mm
U
X07 / 0402 X2Y
4000
Paper
8mm/2mm
T
10000
Paper
8mm/2mm
R
X14 / 0603 X2Y
4000
Paper
8mm/4mm
T
10000
Paper
8mm/4mm
R
X15 / 0805 X2Y
4000
Embossed
8mm/4mm
E
10000
Embossed
8mm/4mm
U
X18 / 1206 X2Y
3000 - 4000
Embossed
8mm/4mm
E
10000
Embossed
8mm/4mm
U
X41 / 1210 X2Y
2000 - 3000
Embossed
8mm/4mm
E
X44 / 1410 X2Y
1000 - 2000
Embossed
8mm/4mm
E
X43 / 1812 X2Y
1000
Embossed
12mm/8mm
E
Actual reel quantities based on part thickness and tape type. Contact sales for reel quantities of specific part numbers.
34
Width
.472±.008
(12.0±0.2)
www.johanson dielectrics.com
WIDTH / PITCH
CODE
N/A
N/A
ELECTRICAL CHARACTERISTICS
PARAMETER
TEMPERATURE
COEFFICIENT:
NPO
0± 30 ppm/°C
X7R
-55 to +125°C
± 15%
± 15%
0%
0%
0%
-20%
-20%
-40%
-40%
-40%
-60%
-60%
-60%
-25°C
DISSIPATION
FACTOR:
0°C
25°C
50°C
75°C
100°C
-80%
-55°C
125°C
-55 to +85°C
20%
-20%
-80%
-55°C
-25°C
0°C
25°C
50°C
75°C
100°C
-80%
-55°C
125°C
-25°C
0°C
25°C
50°C
75°C
100°C
125°C
.001 (0.1%) max
WVDC ≥ 50 VDC, DF = 2.5% max
WVDC = 25 VDC, DF = 3.0% max
WVDC = 16 VDC, DF = 3.5% max
For Vrated ≥ 50 VDC, DF = 5% max
For Vrated ≤ 25 VDC: DF = 10% max
None
2.5% / decade hour
2.5 % / decade hour
1000ΩF or 100GΩ
whichever is less @ 25°C, WVDC
500ΩF or 50GΩ
whichever is less @ 25°C, WVDC
100ΩF or 10GΩ
whichever is less @ 25°C, WVDC
AGING:
DIELECTRIC
STRENGTH:
TEST
PARAMETERS:
NOTES:
-55 to +125°C
20%
20%
INSULATION
RESISTANCE:
X5R
For Vrated = 6 - 200 VDC, DWV = 2.5 X WVDC, 25°C, 50mA max.
For Vrated = 201 - 499 VDC, DWV = 2.0 X WVDC, 25°C, 50mA max.
For Vrated = 500 - 999 VDC, DWV = 1.5 X WVDC, 25°C, 50mA max.
For Vrated = 1000+ VDC, DWV = 1.2 X WVDC, 25°C, 50mA max.
C > 100 pF; 1kHz ±50Hz;1.0±0.2 VRMS
C ≤ 100 pF 1Mhz ±50kHz; 1.0±0.2 VRMS
DWV = 2.5 X WVDC, 25°C, 50mA max.
1kHz ±50Hz;1.0±0.2 VRMS
1kHz ±50Hz; 0.5±0.2 VRMS
Tanceram IR = 100 ΩF or 10 GΩ
Tanceram DF for Vrated ≥ 50 VDC = 5% max.
Tanceram DF for Vrated ≤ 25 VDC, DF = 10%
max
PART NUMBER BREAKDOWN
Part number written: 500R15N101JV4T
500
R15
N
101
J
V
4
T
VOLTAGE
SIZE
DIELECTRIC
CAPACITANCE
TOLERANCE
TERMINATION
MARKING
PACKING
6R3 = 6.3 V
100 = 10 V
160 = 16 V
250 = 25 V
500 = 50 V
101 = 100 V
201 = 200 V
251 = 250 V
301 = 300 V
501 = 500 V
631 = 630 V
102 = 1000 V
202 = 2000 V
302 = 3000 V
402 = 4000 V
502 = 5000 V
ACJ = 250 VAC
R05=0201
R07=0402
R14=0603
R15=0805
A18=0612
R18=1206
S41=1210
R29=1808
R30=2011
S43=1812
S47=2220
S49=1825
S48=2225
X07=0402 X2Y
X14=0603 X2Y
X15=0805 X2Y
X18=1206 X2Y
X41=1210 X2Y
X44=1410 X2Y
X43=1812 X2Y
N = NPO
W = X7R
X = X5R
* B = ± 0.10 pF
* C = ± 0.25 pF
* D = ± 0.50 pF
F= ±1%
G = ± 2%
J = ± 5%
K = ± 10%
M = ± 20%
Z = +80 -20%
V = Nickel Barrier
with 100% Tin
Plating (Matte)
3 = Special (J)
4 = Unmarked
6 = EIA Code*
F = Polyterm
flexible termination
*Not available on
sizes ≥ 0402
E =Embossed 7”
T =Punched 7”
U =Embossed 13”
R =Punched 13”
1st two digits are
significant; third
digit denotes
number of zeros,
R = decimal.
100 = 10 pF
102 = 1,000 pF
474 = 0.47 µF
475 = 4.7 µF
*Values < 10 pF only
106 = 10 µF
T = SnPb
P = PdAg
No code = bulk
pack
Tape specifications
conform to EIA
RS481
Not all tape styles
are available on
all parts.
PLEASE NOTE: Not all combinations of JDI P/Ns are valid. Please refer to the appropriate “How to Order” section for a particular product or contact your Sales Representative if you need assistance.
www.johanson dielectrics.com
35
Your Technology Partner
High Voltage
AC Safety
X2Y
Tanceram
Low Voltage
Tin-Lead
High Temperature
AC Power
Feedthru Filter
SMPS
Low ESL
Radial Leaded
CORPORATE HEADQUARTERS
JOHANSON HONG KONG LTD.
15191 Bledsoe Street
Sylmar, California 91342
Tel (818) 364-9800 • FAX (818) 364-6100
http://www.johansondielectrics.com
Unit E, 11/F., Phase 1, Kaiser Estate
41 Man Yue Street
Hunghom, Kowloon, Hong Kong
Tel: (852) 2334 6310 • Fax: (852) 2334 8858
© 2012 Publication JD1201 Printed in USA
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement