Contents

1.

FEATURES

2.

CONTROLS

MAIN UNIT

DISPLAY

3.

BUTTON TERMINOLOGY

Names of the Buttons and Their Functions

4.

PRECAUTIONS

5.

HANDLING COMPACT DISCS

6.

DCP (Detachable Control Panel)

7.

REMOTE CONTROL

Inserting the Battery

Functions of Remote Control Unit Buttons

8.

OPERATIONS

Basic Operations

Radio Mode Operations

CD/MP3IWMA Mode Operations

USB Mode Operation

Operation Common to CD and USB Drive

Operations Common to Each Mode

9.

TROUBLESHOOTING

10. ERROR DISPLAYS

11. SPECIFICATIONS

• USB slot on control panel

• MP3 and WMA compatible with ID3-TAG display

• "Z-ENHANCER" sound customization & "MAGNA BASS EX" dynamic bass enhancement

rnJDO~@

DIGITAL AUDIO mp3

ID3TAG

2

9

9

10

6

7

8

3

3

3

4

4

11

11

13

14

16

18

21

22

24

24

Be sure to unfold and read the next page.

Veuillez deplorer at

VOIlS relerer a

/a page sliivanta.

Cerciorese de desplegar y de leer la pagina siguiente.

~

2

DB365USB

/ UNIDAD PRINCIPAL

[ROTARY]

[SCN]

[CD SLOT]

~~I~1 r -...........................

[~]

[ROM] [0] [T]

D~PLAY/AFACHEUR/WSUAL~ADOR

~

••••• ••••• ••••• ••••• ••••• ••••• ••••• ••••• Z c

i:ili i:ili i:ili i:ili·i:ili i:ili·i:ili i:ili

~

L.!IJ5.

~

••••• ••••• ••••• ••••• ••••• •••••• ••••• ••••• p-

:=:

~ALL···SCNRPTRDM MANU mSTm MUTE ~

Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.

Remarque; Veuillez deplier cette page at vous referer aux scMmas quand vous lisez chaque chapitre.

Nota: Cuando lea los capitulos, despliegue esta pagina y consulte los diagramas.

3

DB365USB

Note:

• Be sure to read this chapter referring to the front diagrams of chapter "2. CONTROLS" on page 3.

Names of the Buttons and Their Functions

[RELEASE] button

• Press the [RELEASE] button to unlock the detachable panel.

[A] button

• Press the button to switch to the ADJ mode.

[ 1'llII'llII,

~I]

buttons

• Select a station while in the Radio mode or select a track when listening to a CD/USB. These buttons is used to make various settings.

• Press and hold the button for 1 second or longer to enter the fast-forward or fast-backward in

CD/USB mode.

[A-M] button

• Press the button to switch to the Audio mode

(Bass, Treble, Balance, Fader).

• Press and hold for 1 second or longer to turn on or off the M-B EX mode.

[BND] button

• Switch the band, seek tuning or manual tuning while in the Radio mode.

• Playa first track while in the CD/MP3IWMA or

USB mode.

[lSR] button

• Recall ISR radio station in memory.

• Press and hold for 2 seconds or longer: Store current station into ISR memory (Radio mode only).

[SRC] button

• Press the button to turn on the power.

Press and hold the button for 1 second or longer to turn off the power.

• Switch the Operation mode among the Radio mode, etc.

[0] button

• During Radio/CD mode, switch the display indication (Main display, Clock display).

• During MP3IWMAlUSB mode, switch the display indication in the following order:

Track No.lPlay time

-+

Folder No./Track No.

-+

Title Display

-+

Clock Display

-+

Track No.1

Play time ...

[Z] button

• Press the button to select one of the 3 types of sound characteristics already stored in memory.

[T] button

• Press the button to switch the track titles, while in the MP3IWMAlUSB mode.

• Press and hold the button for 1 second or longer to scroll the title during title display, while in the

MP3IWMA or USB mode.

[UP], [ON] buttons

• Select the Folder (MP3/WMA disc or USB drive).

• Press the button to select CD-DA or MP3IWMA on a multi-session disc.

[ROM] button

• Perform random play while in the CD/MP3IWMA or USB mode.

• Press and hold the button for 1 second or longer to perform folder random play while in the MP3/

WMA or USB mode.

[SCN] button

• Perform scan play for 10 seconds of each track while in the CD/MP3IWMA or USB mode.

• Press and hold the button for 1 second or longer to perform folder scan play while in the

MP3IWMA or USB mode.

[RPT] button

• Repeat play while in the CD/MP3IWMA or USB mode.

• Press and hold the button for 1 second or longer to perform folder repeat play while in the MP3/

WMA or USB mode.

[DIRECT] buttons

• Store a station into memory or recall it directly while in the Radio mode.

[USB PORT]

• USB drive insertion port.

4

DB365USB

Names of the Buttons and Their

Functions

[~]

button

• Eject a CD when it is loaded into the unit.

[CD SLOT]

• CD insertion slot.

[SENSOR]

• Receiver for remote control unit.

• Operating range: 30° in all directions.

[

~II]

button

• Perform preset scan while in the Radio mode.

Press and hold the button for 2 seconds or longer to perform auto store.

• Play or pause a track while in the CD/MP31

WMA or USB mode.

[ROTARY] knob

• Adjust the volume by turning the knob clockwise or counterclockwise.

• Use the knob to perform various settings.

DB365USB

5

During extreme cold temperatures, condensation may form on the disc and/or the optical part of the player. If the disc exhibits condensation, carefully wipe off the disc with a soft cloth. In the event the disc still does not play properly, eject the disc and allow the condensation to disappear naturally from the optical parts of the player. Radio, Auxiliary and USB functions can still be during this time which may take up to an hour.

2. Driving on extremely bumpy roads may cause the CO to skip.

3. This unit uses a precision mechanism.

Even in the event that trouble arises, never open the case, disassemble the unit, or lubricate the rotating parts.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to consult the dealer or an experienced radiolTV technician for help.

USE OF CONTROLS, ADJUSTMENTS,

OR PERFORMANCE OF PROCEDURES

OTHER THAN THOSE SPECIFIED HEREIN,

MAY RESULT IN HAZARDOUS RADIATION

EXPOSURE.

THE COMPACT DISC PLAYER SHOULD NOT

BE ADJUSTED OR REPAIRED BY ANYONE

EXCEPT PROPERLY QUALIFIED SERVICE

PERSONNEL

"Ni·JjMe·iil,U'i·Jj'l}i#jtt

CHANGES OR MODIFICATIONS TO THIS

PRODUCTNOTAPPROVEDBYTHEMAN~

FACTURER WILL VOID THE WARRANTY

AND WILL VIOLATE FCC APPROVAL

MODEL

D8365US8

clarion

12V e

GROUND

AM 530-1710kHz / FM 87.9-107.9MHz

TH IS OEVICE COMPLIES WITH PART 15 OF THE FCC RULES.

OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

(2)

~i~~~~ifJN~~~H~'fCJN~~0~'fG~6~~~~~6 ~~~~IXil~~NCLUDING

THIS PRODUCTION COMPLIES WITH DHHS RULES 21 CFR SUBCHAPTER

J APPLICABLE AT DATE OF MANUFACTURE.

CLARION CO., LTD.

50 KAMITOOA,TODA-SHI,SAITAMA-KEN,JAPAN

This product includes technology owned by Microsoft Corporation and cannot be used or distributed withem a license from MSlGP

MANUFACTURED: CLARION MALAYSIA

Bottom View of Source Unit

276-0080-00

Clarion Co.,Ltd.

MADE IN MALAYSIA

SERIAL No.

PE-2872B

6

DB365USB

This unit has been designed specifi II for playback of compact discs bearing the mark. No other discs can be played.

To remove the compact disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges.

Removing the disc Proper way to hold the compact disc ~

Always handle the compact disc by the edges.

Never touch the surface.

To remove fingermarks and dust, use a soft cloth, and Wipe in a straight line from the center of the compact disc to the circumference.

Note on compact discs

Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen.

Do not use any solvents such as commercially available cleaners, anti-static spray, or thinner to clean compact discs.

No

I

Do not use compact discs that have large scratches, are misshapen, or cracked, etc. Use of such discs will cause mlsoperation or damage.

New discs may have some roughness around the edges. The unit may not work or the sound may skip if such discs are used. Use a ball-point pen, etc. to remove roughness from the edge of the disc.

Roughness

Do not expose compact discs to direct sunlight or any heat sou rce.

~

..

Note:

• Do not use commercially available CD protection sheets or discs equipped with stabilizers, etc. These may get caught in the internal mechanism and damage the disc.

DB365USB

7

The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (Detachable Control Panel) case to prevent scratches.

We recommend taking the DCP with you when leaving the car.

Removing the DCP

1. Press the [SRC] button for 1 second or longer to switch off the power.

2. Press in the [RELEASE] button.

~

[RELEASE] button

Storing the DCP in the DCP case

Hold the DCP, in the orientation as shown in the figure below, and put it into the supplied DCP case. (Ensure the DCP is in the correct orientation.)

DCP

DCP case

1(1

*

The DCP is unlocked.

3. Pull the DCP toward you and remove it.

• The DCP can easily be damaged by impact.

After removing it, be careful not to drop it or SUbject it to strong shocks.

• If the FLIP DOWN PANEL is kept open, the

DCP may drop due to vibration of the car.

This may result in damage to the DCP. So close the FLIP DOWN PANEL or remove the

DCP and store in the case.

• The connector connecting the main unit and the DCP is an extremely important part. Be careful not to damage it by pressing on it with fingernails, pens, screwdrivers, etc.

Attaching the DCP

1. Insert the right side of the DCP into the main unit.

2. Insert the left side of the DCP to attach into the main unit.

Note:

• If the DCP is dirty, wipe off the dirt with a soft, dry cloth only.

8

DB365USB

[SRC]

[i], [f]

[MUTE]

[ISRlj

[SCN]

I+C

OND

•

G

DISC UP

TOP

II

~II l

,

II

II

8GJG

Mur:,..>fsR DISP

8QG

SCN

PS/AS TV/VTR

II

II

II

clarion

• WIRELESS REMOTE CONTROllER •

[BND]

[~II]

[~],[~]

[DISP]

[ROM]

[RPT]

Inserting the Battery

1. Turn over the remote control unit and slide the cover in the direction indicated by the arrow in the illustration.

2. Insert the battery (CR2025) into the insertion guides, with the printed side (+) facing upwards.

3. Press the battery in the direction indicated by the arrow so that it slides into the compartment.

4. Replace the cover and slide in until it clicks into place.

Notes:

Misuse may result in rupture of the battery, producing leakage of fluid and resulting in personal injury or damage to surrounding materials. Always follow these safety precautions:

• Use only the designated battery.

• When replacing the battery, insert properly, with

+/- polarities oriented correctly.

• Do not subject battery to heat, or dispose of in fire or water. Do not attempt to disassemble the battery.

• Dispose of used batteries properly.

DB365USB

9

Functions of Remote Control Unit Buttons

[BND]

[!], [T]

[I~~], [~~I]

Press the button to power on.

Press and hold the button for 1 second or longer: Power off.

Switch among Radio, CO/MP3IWMA, USB and AUX.

Switch reception band.

Play the first track. Top play.

Increase and decrease volume (in all modes).

Move preset channels up and down.

Move tracks up and down.

Press and hold the button for 1 second or longer: Fastforward/fast-backward.

[~II]

[MUTE]

[lSR]

Switch between playback and pause.

[DISP]

[SeN]

[RPT]

[ROM]

Recall ISR radio station in memory.

Press and hold for 2 seconds or longer: Stores current station into ISR memory (radio mode only).

Switch among main display and clock display.

Switch among main display, title display and clock display.

Preset scan.

Press and hold the button for 2 seconds or longer:

Auto store.

No function.

No function.

Scan play.

Press and hold the button for 1 second or longer to perform folder scan play while in the MP3IWMA or USB mode.

Repeat play.

Press and hold the button for 1 second or longer to perform folder repeat play while in the MP3IWMA or USB mode.

Random play.

Press and hold the button for 1 second or longer to perform folder random play while in the MP3IWMA or

USB mode.

*

Some of the corresponding buttons on the main unit and remote control unit have different functions.

10

DB365USB

Basic Operations

Note: Be sure to read this chapter referring to the front diagrams of chapter "2. CONTROLS" on page 3.

Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit.

Turning on/off the power

Note:

• Be careful about using this unit for a long time without running the engine. If you drain the car's battery too far, you may not be able to start the engine and this can reduce the service life of the battery.

1. Press the

[SRC]

button.

2. The illumination and display on the unit light up. The unit automatically remembers its last

Operation mode and will automatically switch to display that mode.

3. Press and hold the

[SRC]

button for 1 second or longer to turn off the power for the unit.

Selecting a mode

1. Press the tion mode.

[SRC]

button to change the Opera-

2. Each time you press the

[SRC]

button, the Operation mode changes in the following order:

Radio mode

~

CDIMP3IWMA mode

~

(USB mode)

~

AUX mode

~

Radio mode...

Notes:

• If the CD mode is selected when no disc is inserted, the display shows "NO DISC".

• If no USB drive is inserted, USB mode will not be displayed.

• Radio/CD Mode:

Main display

~

Clock display

~

Main display

• MP3IWMAlUSB Mode:

Main-1 display

(Track No., play time) ~

Main-

2

Display

(Folder No., Track No.) ~

Title

Display

~

Clock Display

~

Main-1 Display...

*

Once selected, the preferred display becomes the display default. When a function adjustment such as volume is made, the screen will momentarily switch to that function's display, then revert back to the preferred display several seconds after the adjustment.

Adjusting the volume

Turning the

[ROTARY]

knob clockwise increases the volume; turning it counterclockwise decreases the volume.

*

The volume level is from 0 (minimum) to 33 (maximum).

Audio mode adjustments

1. Press the

[A-M]

button to select the Adjustment mode. The mode switches as follows each time the

[A-M]

button is pressed:

BASS

~

TREB

~

BAL

~

FAD

~ Previous mode

2. Turning the

[ROTARY]

selected Audio mode.

knob to adjust the

BASS (Bass) : Adjustment range : -7 to +7

TREB (Treble): Adjustment range: -7 to +7

BAL (Balance): Adjustment range: L13 to R13

FAD (Fader) : Adjustment range: F12 to R12

*

The display returns to the previous mode 7 seconds after the adjustment.

Note:

• Bass and Treble can only be adjusted when the

"Z-Enhancer"

is off.

Switching the display

Press the [0] button to select the desired display.

Each time you press the [0] button, the display switches in the following order:

DB365USB

11

Basic Operations

Setting the Z-Enhancer

This unit are provided with 3 types of sound tone effects stored in memory. Select the one you prefer.

*

The factory default setting is "Z-EHCR OFF".

Each time you press the [Z] button, the tone effect changes in the following order:

"Z-EHCR OFF" ~ "Z-EHCR 1" ~ "Z-EHCR 2"

"Z-EHCR 3" ~ "Z-EHCR OFF" ...

• Z-EHCR 1

• Z-EHCR 2

: bass emphasized

: bass and treble emphasized

• Z-EHCR 3 : bass and treble emphasized mid de-emphasized

• Z-EHCR OFF : no sound effect

Adjusting the balance

1. Press the [A-M] button and select "BAL 0".

2. Turning the [ROTARY] knob clockwise emphasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker.

*

The factory default setting is "SAL 0".

(Adjustment range: L13 to R13)

3. When the adjustment is complete, press the

[A-M] button several times until the Function mode is reached.

Adjusting the fader

1. Press the [A-M] button and select "FAD 0".

2. Turning the [ROTARY] knob clockwise emphasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers.

*

The factory default setting is "FAD 0".

(Adjustment range: F12 to R12)

3. When the adjustment is complete, press the

[A-M] button several times until the Function mode is reached.

Adjusting MAGNA BASS EX

The MAGNA BASS EX does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound.

*

The factory default setting is off.

1. Press and hold the [A-M] button for 1 second or longer to turn on the MAGNA BASS EX effect.

"M-B EX" lights in the display.

2. Press and hold the [A-M] button for 1 second or longer to turn off the MAGNA BASS EX effect.

"M-B EX" goes off from the display.

AUX function

This system has external input jacks so you can listen to sounds and music from external devices connected to this unit.

1. Press the [SRC] button and select the AUX mode to activate the AUX function.

12

DB365USB

Radio Mode Operations

Listening to the radio

1. Press the [SRC] button and select the Radio mode, then the radio will be on.

2. To select a preset band, press the [BND] button, then select one of the preset bands such as FM1, FM2, FM3 or AM. Every time the [BND] button is pressed, the display will change as:

FM1-+FM2 -+ FM3 -+ AM -+ FM1 ...

3. Press the [I~~, ~I] button to tune in the desired station.

Seek tuning

1. Press the [BND] button and select the desired band (FM or AM).

*

If "MANU" is lit in the display, press and hold the [BND] button for 1 second or longer.

"MANU" in the display goes off and seek tuning is now available.

2. Press the [ I~~ , ~~I ] button to start automatic station tuning.

When the [~I] button is pressed, search will be performing in the direction of higher frequencies. When the [ I~] button is pressed, search will be performed in the direction of lower frequencies.

Manual tuning

There are 2 ways available: Quick tuning and step tuning.

When you are in the step Tuning mode, the frequency changes one step at a time. In the quick

Tuning mode, you can quickly tune the desired frequency.

1. Press the [BND] button and select the desired band (FM or AM).

*

If "MANU" is not lit in the display, press and hold the [BND] button for 1 second or longer.

"MANU" is lit in the display and manual tuning is now available.

2. Tune into a station.

• Quick tuning:

Press and hold the [I~, ~I] button for 1 second or longer to begin station tuning.

• Step tuning:

Press the [I~~ , ~I] button to perform manual tuning.

Preset memory function

Preset memory function can store up to 24 stations:

Six stations for each of FM1, FM2, FM3 and AM.

Manual memory function

1. Press the [BND] button, to select a band you want to store in the memory.

2. Press the [ I~ , ~~I] button to tune into a desired station.

3. Press and hold one of the [DIRECT] buttons for

2 seconds or longer to store the current station into preset memory.

Auto store

Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains un-overwritten at the memory position.

1. Press the [BND] button and select the desired band (FM or AM).

2. Press and hold the [

~II

] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels.

Preset scan

Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory.

'1. Press the

[~II] button.

2. When a desired station is tuned in, press the

[~II] button again to continue receiving that station.

Note:

• Be careful not to press and hold the [

~II

] button for 2 seconds or longer, otherwise the auto store function is ,engaged and the unit starts storing stations.

DB365USB

13

Radio Mode Operations

Recalling a preset station

A total of 24 preset positions (6-FM1, 6-FM2, 6-

FM3, 6-AM) exists to store individual radio stations in memory. Pressing the corresponding [DI-

RECT] button recalls the stored radio frequency automatically.

1. Press the [BND] button and select the desired band (FM or AM).

2. Press the corresponding [DIRECT] button to recall the stored station.

*

Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store that station into preset memory.

Instant station recall (lSR)

Instant station recall is a special radio preset that instantly accesses a favorite radio station at a touch of a button. The ISR function even operates with the unit in other modes.

• ISR memory

1. Select the station that you wish to store in ISR memory.

2. Press and hold the USR] button for 2 seconds or longer.

• Recalling a station with ISR

In any mode, press the USR] button to turn on the radio function and. tune the selected radio station. "ISR" appears in the display. Press the USR] button again to return to the previous mode.

CD/MP3IWMA Mode

Operations

What is MP3?

MP3 is an audio compression method and classified into audio layer 3 of MPEG standards. This audio compression method has penetrated into

PC users and become a standard format. This

MP3 features the original audio data compression to about 12 percent of its initial size with a high quality sound. This means that about 10 music CDs can be recorded on a CD-R disc or

CD-RW disc to allow a long listening time without having to change CDs.

What is WMA?

WMA is the abbreviation of Windows Media Audio, an audio file format developed by Microsoft

Corporation.

Notes:

• If you playa file with DRM (Digital Rights Management) for WMA remaining ON, no audio is output.

• Windows Media™, and the Windows® logo are trademarks, or registered trademarks of Microsoft

Corporation in the United States and/or other countries.

• To disable DRM

(Digital Rights Management):

1. When using Windows Media Player 8, click on TOOLS ~ OPTIONS ~ COpy MUSIC tab, then under COPY SETTINGS unclick the check box for PROTECT CONTENT. Then, reconstruct files.

2. When using Windows Media Player 9, click on TOOL ~ OPTIONS ~ MUSIC RECORD tab, then under Recording settings, unclick the check box for RECORD PROTECTED MUSIC.

Then, reconstruct files.

3. When using Windows Media Player 10, click on

TOOL ~ OPTIONS ~ RIP MUSIC tab, then under Rip settings, unclick the check box for

COpy PROTECT MUSIC. Then, reconstruct files. Personally constructed WMA files are used at your own responsibility.

• Precautions when creating MP3IWMA disc

Please refer to the usable sampling rates and bit rates of chapter "11. SPECIFICATIONS" on page 24.

14

DB365USB

CD/MP3IWMA Mode Operations

• File extensions

• Always add a file extension ".MP3" or ".WMA" to MP3 or WMA file by using single byte letters.

If you add a file extension other than specified or forget to add the file extension, the file cannot be played.

• Logical format (File system)

1. When writing MP3IWMA file on a CD-R disc or

CD-RW disc, please select "IS09660 level 1, 2 or JOLIET or Romeo" as the writing software format. Normal play may not be possible if the disc is recorded on another format.

2. The folder name and file name can be displayed as the title during MP3IWMA play but the title must be within 28 single byte alphabetical letters and numerals (including an extension).

3. Do not affix a name to a file inside a folder having the same name.

• Folder structure

1. A disc with a folder having more than 8 hierarchical levels will be impossible.

• Number of files or folders

1. Up to 255 files can be recognized per folder.

Up to 255 files can be played.

Note:

• The company will not guarantee any unexpected result caused by exceeding the files limitation.

2. Tracks are played in the order that they were recorded onto a disc. (Tracks might not always be played in the order displayed on the PC.)

3. Some noise may occur depending on the type of encoder software used while recording.

CD-DAlMP3IWMA selection on multi-session CD

1. If a multi-session CD which contains CD-DA and MP3IWMA files is being inserted, user can select either CD-DA or MP3IWMA files to be played.

Note:

• CD-DA files will always be the first to be played while MP3IWMA files will be playing subsequently.

2. Press the [UP] button will move to the next folder and MP3IWMA files to be played. Press the [ON] button at the time will return to CD-DA playing files.

Disc-In-Play function

As long as the ignition key is turned to the ON or ACC position, this function allows you to turn the power to the unit and start playing the disc automatically when the disc is inserted even if the power is not turned on.

• Do not try to put your hand or fingers in the disc insertion slot. Also never insert foreign objects into the slot.

• Do not insert discs where adhesive comes out from cellophane tape or a rental CD label, or discs with marks where cellophane tape or rental CD labels were removed. It may be impossible to extract these discs from the unit and they may cause the unit to break down.

Backup eject function

Just pressing the

[~] button ejects the disc even if the power to the unit was not turned on. Remove the disc after it is ejected.

Notes:

• If you force a CD into before auto reloading, this can damage the CD.

• If a CD (12 cm) is left in the ejected position for 15 seconds, the CD is automatically reloaded. (Auto reload).

• 8 cm CDs are not auto reloaded. Be sure to remove it when ejected.

Listening to a disc already loaded in the unit

Press the [SRC] button to select the CD/M P31

WMAmode.

When the unit enters the CD/MP3IWMA mode, play starts automatically.

If there is no disc loaded, the indication "NO

DISC" appears in the title display.

Radio ~ CDIMP3IWMA ~ (USB) ~ AUX ~

Radio...

DB365USB

15

CD/MP3IWMA Mode Operations

Loading a CD

Insert a CD into the center of the CD SLOT with the labeled side facing up.

"LOADING"

appears in the display, the CD plays automatically after loading.

Notes:

• Never insert foreign objects into the CD SLOT.

• If the CD is not inserted easily, there may be another CD in the mechanism or the unit may require service.

.

.

rnm~@

• DIscs not beanng the

DIGITALAUDID cannot be played by this unit.

mark and CD-ROMs

• Some CDs recorded in CD-R/CD-RW mode may not be usable.

Loading 8 cm compact discs

*

No adapter is required to play an 8 cm CD.

*

Insert the 8 cm CD into the center of the insertion slot.

For CD/MP3IWMA playback, please refer to

"Operations Common to CD and

USB

Drive".

USB Mode Operation

What is USB?

USB is the abbreviation of Universal Serial Bus, an external bus standard that supports data transfer rates of 12Mbps. The main unit is USB

2.0 compatible. (It is compliant with Universal Serial Bus Revision 1.1 specification, which is Full

Speed supported but not running at High-Speed).

This means that the transfer rates only supports until 12Mbps, which is the maximum speed of

USB1.1. USB also support hot plugging, which is the ability to add and remove devices to a main unit while the unit is running and automatically recognize the change.

Supported audio files playback

Only MP3 and WMA files are currently supported. For further information on MP3IWMA playback, please refer to

"Operations Common To

CD and

USB

Drive".

Hot plugging function

When the unit is power on, this function allows you to start playing the tracks automatically when the USB drive is inserted.

• Do not try to put your hand or fingers in the

USB

insertion port. Also never insert foreign objects into the port.

• Do not insert

USB

devices other than

"USB

mass storage class" as this will have no function to the main unit or device and may have unexpected result.

• The main unit cannot be connected with the personal computer or laptop.

• USB

drive that contains WMA files with

DRM protected will not be read by the main unit.

• Reading time for a

USB

drive may differ depends on the contents of the data.

• USB

drive insertion may result in protruding as it might be dangerous to the user while driving. For safety purposes, it is advisable to use an

USB

extension cable to connect between the

USB

drive and the

USB

port on the main unit.

16

DB365USB

USB Mode Operation

• USB drives may have different shape depends on brands. Some USB drives may not be able to plug into the port due to the shape design. Please use an extension cable instead.

• The company will not guarantee that every

USB drive brands will be able to work with the main unit.

• Please remove your USB drive while you are not inside your vehicle because USB drive may not have automotive specification and it will be damaged by overheating environment.

• Electrostatic may result data loss in the

USB drive.

• The company will not responsible for any data loss when using the USB drive with the main unit. Please backup your data before proceeding.

• Please make sure that the total supported files limitation in the USB drive, which are

255 files. The company will not guarantee any unexpected result caused by exceeding the files limitation.

Listening to a track with USB drive already plug into the unit

Press the

[SRC]

button to select the

USB

mode.

When the unit enters the start to play automatically.

USB

mode, track will

If there is no

USB

drive inserted, not be shown for selection.

USB

mode will

*

The mode changes each time the [SRC] button is pressed.

Radio

Radio...

-+

CDIMP3IWMA

-+

(USB)

-+

AUX

-+

Plugging in a USB drive

Plug the direction.

USB

drive into the port with the correct

Note:

• Do not forcibly plug the USB drive to the port with incorrect direction as this will damage the USB drive as well as the USB port.

Unplug the USB drive

Just pull out the

USB

drive from the port during

USB

mode, the unit will revert to Radio mode automatically.

DB365USB

17

Operation Common to CD and USB Drive

Pausing play

1. Press the [

~II] button to pause play. "PAUSE" appears in the display.

2. To resume track play, press the

[~II] button again.

Title display mode

1. There are 5 types of display for the Title Display mode.

2. To select the next type, press the [T] button for less than 1 second.

The arrangement is shown below.

After 2 seconds

Displaying CD titles

This unit can display title data for MP3IWMA.

1. Press the [0] button to display the title.

2. Each time you press the [T] button, the title display changes in the following order:

• MP3IWMA disc

Folder ~ Track ~ Album TAG ~ Artist TAG ~

Title TAG ~ Folder...

Notes:

• If MP3IWMA disc is not input TAG, "NO TAG" appears in the display.

• For MP3, supports 103 Tags V2.4/2.3/2.2/1.1 /1.0.

• Tag displays give priority to V2.4/2.3/2.2.

• In the case of album Tags for WMA, the information written into the extension header is displayed.

• Only ASCII characters can be displayed in Tags.

Display selection

1. You can choose the display type for MP3IWMA by pressing the [D] button.

To select the next type, press the [D] button again.

The arrangement is shown below.

1.....

2Q_=181

(Track No., play time)

\11

1F7(')~mS51

(Folder No., track No.)

\11

IEII_PEERl

(Folder)

*Refer to "Title Display Mode"

\11

C[FOLDER] [FolderTitle]

C [TRACK] [Track Title]

(ALBUM) -----. (Album Tag)

CC(ARTIST ) -----. (ArtistTag )

(TITLE) -----. (Title Tag)

3. The displayed item can be scrolled by pressing the [T] button for more than 1 second.

4. If a MP3IWMA file does not support for ID3

TAG, the display will show "NO TAG"

5. If a MP3IWMA file encode with ID3 TAG header but not consist of any TAG information, the display will show nothing.

Notes:

• The folder name will be displayed as "ROOT" which the file allocates in the root folder.

• The MP3 player decodes each file 103 TAG ver 2 by default, if 103 TAG ver 2 is unavailable, 103 TAG ver 1 will be decoded.

• UNICODE 103 (Chinese, Japanese and etc) is not supported.

Selecting a track

• Track-up

1. Press the [ ~~I] button to move to the beginning of the next track.

2. Each time the [ ~~I ] button is pressed, playback proceeds to another track in the advancing direction.

• Track-down

1. Press the [I~~] button to move the beginning of the cu rrent track.

2. Press the [I~~] button twice to move to the beginning of the previous track.

18

DB365USB

Operation Common to CD and USB Drive

Fast-forwardlfast-backward

• Fast-forward

Press and hold the [ ~~I] button for 1 second or longer.

• Fast-backward

Press and hold the [ I... ] button for 1 second or longer.

*

For Audio CD mode pressing the [1<l1li<l1li

,~~I] button for 1 second or longer will move forward or backward 5 times faster than normal play, and pressing it for 3 seconds or longer will do the operation 30 times faster.

*

For MP3IWMA mode pressing the

[1<l1li<l1li,

~~Il button for 1 second or longer will move forward or backward 5 times faster than normal play, and pressing it for 3 seconds or longer will do the operation 10 times faster:

Example of a medium's folder/file hierarchy.

o

MP3IWMA playing order

When selected for playing folder up down functions, files and folders are accessed in the order in which they were written by the CD-ROM writer or USB drive. Because of this, the order in which they are expected to be played may not match the order in which they are actually played. You may be able to set the order in which MP3IWMA are to be played by writing them onto a medium such as a CD-R/USB drive with their file names beginning with play sequence numbers such as

"01" to "99", depending on your CD writer.

For example, a medium with the following folder/ file hierarchy is shown below.

Level 1 Level 2 Level 3 Level 4

(II

Root

V

Folder

[?J

File)

Folder Select

This function allows you to select a folder containing MP3IWMA files and start playing from the first track in the folder.

1. Press the [ON] or the [UP] button.

Press the [ON] button to move the previous folder. Press the [UP] button to move the next folder.

Root folder

DB365USB

19

Operation Common to CD and USB Drive

*

Press the [UP] button while in the final folder to shift to the first folder.

*

Folder without an MP3IWMA file is not selectable.

2. Press the [I........ , ~~I] button to select a track.

Top function

Press the [BNO] button, then the CD/USB will start playing from the first song (track number

1).

• Folder repeat play

MP3IWMA:

This function allows you to play all tracks in the

MP3IWMA folder repeated Iy.

1. Press and hold the [RPT] button for 1 second or longer to perform folder repeat play.

The indications "ALL..." and "RPT" light in the display.

Other various play functions

• Scan play

CO-OA:

This function allows you to locate and play the first 10 seconds of all the tracks recorded on a disc.

MP3IWMA:

This function allows you to locate and play the first 10 seconds of all the tracks in current folder.

1. Press the [SCN] button to perform scan play.

The indication "SCN" lights in the display.

*

Scan play starts from the next track after the track currently being played.

• Random play

CO-OA:

This function allows you to play all tracks recorded on a disc in a random order.

MP3IWMA:

This function allows you to play all tracks of current folder in a random order.

.

1. Press the [ROM] button to perform random play.

The indication "ROM" lights in the display.

• Folder random play

MP3IWMA:

This function allows you to play all the tracks of all the folders recorded on an MP3IWMA discI

USB drive in a random order.

1. Press and hold the [ROM] button for 1 second or longer to perform folder random play.

The indications "ALL..." and "ROM" light in the display.

• Folder scan play

MP3IWMA:

This function allows you to locate and play the first 10 seconds of the first track of all the folders on an MP3IWMA disc/USB drive.

1. Press and hold the [SCN] button for 1 second or longer to perform folder scan play.

The indications "ALL..." and "SCN" light in the display.

*

Folder scan play starts from the next track after the track currently being played.

• To cancel play

1. Press the operating button previously selected.

• Repeat play

CO-OA, MP3IWMA :

This function allows you to play the current track repeatedly.

1. Press the [RPT] button to perform repeat play.

The indication "RPT" lights in the display.

20

DB365USB

Operations Common to Each Mode

To change display setting

1. Press the

[A]

button to switch to the adjustment selection display.

2. Press the [ I.- , ~~I] button to select the "item name".

"CLOCK(E)" ~ "SCRN SVR" ~

"A-SCROLL"

3. Turn the [ROTARY] knob to select the "desired

setting value".

*

In the case of item names appearing with the

"E" suffix, after the item name, the

[~II] button must be pressed to display the setting value.

*

After completing settings, press the [A] button to return to the previous mode.

2-1. Select "SCRN SVR".

3-1. Turn the [ROTARY] knob to select the setting.

Each time you turn the [ROTARY] knob, the setting changes in the following order:

SS OFF~SS ON.

Setting the method for title scroll

Set how to scroll in MP3IWMA title.

*

The factory default setting is "ON".

2-1. Select "A-SCROLL".

3-1. Turn the [ROTARY] knob to select "ON" or

"OFF".

• ON:

To scroll automatically.

• OFF:

To scroll just 1 time when the title was changed or the [T] button was pressed for 1 second or longer.

Setting the clock

2-1. Select "CLOCK (E)".

3-1. Press the

[~II] button.

3-2. Press the [

1<lllII<lllII ,

~~I ] lever upward or downward to select the hour or the minute.

3-3. Turn the [ROTARY] knob to set the correct time.

*

The clock is displayed in 12-hour format.

3-4. Press the [

~II memory.

] button to store the time into

Note:

• You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the car's battery or take out this unit, the clock is reset. While setting the clock, if another button or operation is selected, the clock set mode is canceled.

Turning the screen saver function on or off

This unit is provided with the screen saver function which allows you to show various kinds of patterns and characters in the operation status indication area of the display in a random order. You can turn on and off this function.

If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display.

*

The factory default setting is "ON".

DB365USB

21

Replace with a fuse of the same amperage.

If the fuse blows again, consult your store of purchase.

Consult your store of purchase.

Incorrect wiring.

No sound output when Power antenna lead is operating the unit with shorted to ground or amplifiers or power an-' excessive current is retenna attached.

quired for remote-on the amplifiers or power antenna.

1. Turn the unit off.

2. Remove all wires attached to the power antenna lead. Check each wire for a possible short to ground using an ohm meter.

3. Turn the unit back on.

4. Reconnect each amplifier remote wire to the power antenna lead one by one. If the amplifiers turn off before all wires are attached, use an external relay to provide remote-on voltage (excessive current required).

Nothing happens when button are pressed.

Display is not accurate.

The microprocessor has malfunctioned due to noise, etc.

No sound heard.

DCP or main unit connectors are dirty.

The speaker protection circuit is operating.

Turn off the power, then press the [RELEASE] button and remove the DCP.

Press the reset button for about 2 seconds with a thin rod.

Wipe the dirt off with a soft cloth moistened with cleaning alcohol.

1. Turn down sound volume. Function can also be restored by turning the power off and on again. (Speaker volume is reduced automatically when the speaker protection circuit operates).

2. If the sound is muted again, consult our service department.

22

DB365USB

Troubleshooting

Files are not recognized Use MP3IWMA files encoded properly.

as an MP3IWMA file.

File system is not corUse IS09660 level 1, 2 or JOLIET or Romeo rect.

file system.

Sound skips or is noisy.

Disc is dirty.

Clean the disc with a soft cloth.

e:(

:E

~

~

Disc is heavily scratched or warped.

Sound is cut or skipped.

MP3IWMA files are not

Replace with a disc with no scratches.

Use MP3IWMA files encoded properly.

8

Noise is generated or encoded properly.

noise is mixed with sound.

Sound is bad directly after power is tu rned on.

Water droplets may form on the internal lens when the car is parked in a humid place.

Let dry for about 1 hour with the power on.

Wrong filename File system is not correct.

Use IS09660 level 1, 2 or JOLI ET or Romeo file system.

No sound heard.

MP3IWMA files are absent in a USB drive.

Files are not recognized as an MP3IWMA file.

Write MP3/WMA files onto the USB drive properly.

Use MP3IWMA files encoded properly.

Sound is cut or skipped.

MP3IWMA files are not Use MP3IWMA files encoded properly.

G)

>

~

Noise is generated or noise is mixed with sound.

encoded properly.

e:( l D t - - - - - - - - - - - - + - - - - - - - - - - - t - - - - - - - - - - - - - - - - - - - - t 2.

USB drive cannot be USB drive may be damReinsert the USB drive to try again. Replace detected.

aged.

with a new USB drive if failed.

:E

~ USB drive connector is in

~., bad condition.

~ t--U-S-B-d-ri-v-e-i-s-u-n-a-b-Ie-to--+--T-h-e-U-S-B-d-riv-e-c-o-n-ne-c---t--

R

e

-in-s-e-rt-t-h-e-U-S-B-d-ri-ve-w-it-h-t-h-e-c-o-rr-e-ct-d-i-re-c----1 plug into the USB port.

tor may be inserted in tion.

the wrong direction with the port.

The USB drive connector Replace with a new USB drive.

is damaged.

DB365USB

23

ERROR 2

ERROR

3

NO FILE

A DISC cannot be played due to scratches, loaded upsidedown inside the CD deck etc.

No audio file is detected in the

DISC.

This is a failure of CD deck's mechanism and consult your store of purchase.

Replace with a non-scratched, non-warpeddisc.

Eject the disc then reload it properly.

Replace with audio contents loaded DISC.

w

>

a:

c m

en

::l

MNT ERR

NO FILE

USB ERR

Failure detection of USB drive Unplug the USB drive and re-plug into the when it is plugged into the port.

port.

No audio file is detected in the Replace with audio contents loaded USB media.

drive.

USB connector short circuit/ Unplug the USB drive, turn off the power and overloaded.

then turn on the power again.

FM tuner

Frequency Range: 87.9 MHz to 107.9 MHz

Usable Sensitivity: 11 dBf

50 dB Quieting Sensitivity: 17 dBf

Alternate Channel Selectivity: 75 dB

Stereo Separation (1 kHz): 35 dB

Frequency Response (±3 dB): 30 Hz to 15 kHz

AM tuner

Frequency Range:

AM 530 kHz to 1710kHz

Usable Sensitivity: 25 ~ V

CD player

System: Compact disc audio system

Usable Discs: Compact disc

Frequency Response: 10Hz to 20 kHz (±1 dB)

Dynamic Range: 80 dB (1 kHz)

Harmonic Distortion: 0.010/0

24

DB365USB

Specifications

CD

Decode Format

Sampling rate

(kHz)

Bit-rate (kbps)

CD-ROM

Format

MPEG 1, 2 and 2.5 - Layer 3

MPEG-1 : 32,44.1,48

MPEG-2 : 16, 22.05, 24

MPEG-2.5 : 11 .025, 44.1

MPEG-1 : 32 - 320

MPEG-2 : 8 - 160

MPEG-2.5 : 8 - 160

VBR

ISO 9660 Level 1, 2, Romeo and Joliet

Sampling rate

(kHz)

Bit-rate (kbps)

CD-ROM

Format

22.05 - 44.1

48,64,80,96,128,160,192

ISO 9660 Level 1, 2, Romeo and Joliet

USB

USB 1.1 and 2.0 compatible with a maximum transfer rates of up to 12Mbps. (Full speed)

Audio

Maximum Power Output: 200 W (50 W X 4 ch)

Bass Control Action (100 Hz): ±14 dB

Treble Control Action (10 kHz): ±14 dB

Line Output (with AIC 1 kHz, 10 kQ): 1.8 V

General

Power Supply Voltage:

14.4 V DC (10.8 V to 15.6 V allowable), negative ground

Current Consumption: Less than 15 A

Speaker Impedance: 4 Q (4 Q to 8 Q allowable)

Weight: 2.42 lb. (1.1 kg)

Dimensions:

178 mm Width X 50 mm Height X 152 mm

Depth

178mm

~[ r L - - - - - - - " I

Decode Format

Sampling rate

(kHz)

Bit-rate (kbps)

MPEG 1, 2 and 2.5 - Layer 3

MPEG-1 : 32,44.1,48

MPEG-2 : 16, 22.05, 24

MPEG-2.5 : 8, 11.025, 12

MPEG-1 : 32 - 320

MPEG-2 : 8 - 160

MPEG-2.5 : 8 - 160

VBR

Sampling rate

(kHz)

Bit-rate (kbps)

8, 11.025, 16, 22.05, 32,

44.1

48,64,80,96,128,160,192

Common in MP3IWMA Disc and

USB drive

Folder Level Limit : 8 Level

Folder Support

File Support

Folder Name

File Name

: 255

: 255

: Maximum 28 bytes

: Maximum 28 bytes

Notes:

• Specifications comply with JEITA Standards.

• Specifications and design are subject to change without notice for further improvement.

• Please make sure when connecting external power amplifier, that you properly, to the car chassis, ground the amplifier.

• If this is not done, severe damage to the source unit may happen.

Power Output:

19 W RMS x 4 Channels at 4

Q and

THD+N s 10/0

Signal to Noise Ratio:

81 dBA (reference: 1 W into 4Q)

DB365USB

25

Clarion Co., Ltd.

All Rights ReseNed. Copyright © 2006: Clarion Co., Ltd.

Printed in Malaysia I Imprime en Malaisie Ilmpreso en Malasia

PE-2872B

280-8400-00

Printed in Malaysia / Imprime en Malasie / Impreso en Malasia 2006/03 (CM) 284-0816-00

InstallationlWire Connection Guide i

n

Gufa de instalaci6n/conexi6n de cables

R@'

B·;'''·'·

-1.

BEFORE STARTING

I

PR P

1. This set is exclusively for use in cars with a negative ground, 12 V power supply.

2. Read these instructions carefully.

IFS

I

ANTES DE COMENZAR

12 V est exclusivement destine a etre les voitures avec une aHnlentation a rnasse negative.

1. Esta unidad ha sido disenada para utilizarse exclusivamente en autom6viles con fuente de alimentaci6n de 12 V, Y negativo amasa.

2.

Lire ces instructions attentivement 2. Lea cuidadosamente estas instrucciones.

3. Be sure to disconnect the battery"

8 "

terminal before starting. This is to prevent short circuits during installation (Figure 1).

3. S'assurer de debrancher la borne

H

E)

II de la batterie avant de commencer. Cela evitera les court-circuits pendant nnsta!latlon (Figure i).

3. Antes de comenzar, cerci6rese de desconectar el terminal"

8 "

de la baterfa. Esto es para evitar cortocircuitos durante la instalaci6n

(Figura 1).

Car battery

Batterle de voiture

Baterfa del autom6vil

Figure 1 / Figure 1 I Figura 1

-2.

CAUTIONS ON INSTALLATION I P

EC

UTI U SUJET DE I!I STALL I PRECAUCIONES PARA LA INSTALACION

1. Prepare all articles necessary for installing the source unit before starting.

2. Install the unit within 30° of the horizontal plane (Figure 2).

3. If you have to do any work on the car body, such as drilling holes, consult your car dealer beforehand.

4. Use the enclQsed screws for installation. Using other screws can cause damage (Figure 3).

1. Avant de f"'r.;mn"or"'lf"e;:::IY pour installer toutes les pieces necessaires

2. Installer rapparei! avec un angle inferieur rlzontal (Figure 2).

a

30° par rapport a rho-

3.

S'j1 est necessaire dleffectuer certains travaux sur !a carrosserie comme des trous, consulter d'abord votre concessionnaire

1. Antes de comenzar, prepare todos los elementos necesarios para instalar la unidad fuente.

2. Instale la unidad con un angulo de 30° sobre el plano horizontal

(Figura 2).

3. Si tiene que realizar cualquier trabajo en la carrocerfa, como taladrado de orificios, etc., consulte al proveedor de su autom6vil.

4. Uti lice los tornillos suministrados para la instalaci6n. La utilizaci6n de otros tornillos podrfa resultar en danos (Figura 3).

4. Utillser les vis fournies pour l'installation. L'utllisation d'autres vis peut causer des dommages (Figure 3).

Chassis / Chassis I Chasis Chassis / ChassIs I Chasis

Max. 30°

Max. 30°

Max. 30° r

Figure 2 I figure 2 I Figura 2

Max. 5/16" (8 mm)

Max. 5/16'1 (8 mm)

Max. 5/16" (8 mm)

Figure 3 / Figure 3 / Figura 3

Damage

Endommage

Dafiado

'nd'

-3.

INSTALLING THE SOURCE UNIT II 51 L

• Universal Mount

1. Place the universal mounting bracket into the instrument panel, use a screwdriver to bend each stopper of the universal mounting bracket inward, then secure the stopper as shown in Figure 4.

2. Wire as shown in Section 8.

3. Insert the source unit into the universal mounting bracket until it locks.

4. Mount the outer escutcheon so that all the hooks are locked.

E l'A PRElL Pil TE IINSTALACION DE LA UNlOAD FUENTE

• Montage universel

1. Placer Ie support de utiliser un tournevis pour du de sur la Figure universel dans Ie tableau de bord, vers l'exterieur chaque lanqU€3Ue universel, puis fixer les languettes

2. Cabler comnle nlontre dans la Section 8.

dans Ie support de montage universe!

bloque.

4.

f\~onter recusson exterieur de maniere que tous les crochets solent verrouilles.

• Montaje universal

1. Coloque el soporte de montaje universal en el tablero de instrumentos, utilice un destornillador para doblar cada reten del soporte de montaje universal hacia adentro, y despues asegure el reten como se muestra en la Figura 4.

2. Conecte los cables como se muestra en la Secci6n 8.

3. Inserte la unidad fuente en el soporte de montaje universal hasta que quede enganchado.

4. Inserte la pieza ornamental exterior en el soporte de montaje universal hasta que quede enganchado.

Notes:

1) Some car models require special mounting kits for proper installation. Consult your Clarion dealer for details.

2) Fasten the front stopper securely to prevent the source unit from coming loose.

Remarques:

1) Certains modeles de voiture necessitent un kit de nl0ntage pour une installation correcte. Consulter !e revendeur pour les details.

2) Serrer fermenlent la languette avant pour eviter que lfappareil pilote ne se desserre.

Notas:

1) Algunos modelos de autom6viles requieren juegos de montaje especiales para realizar la instalaci6n apropiada. Solicite los detalles a su proveedor Clarion.

2) Apriete con seguridad el reten frontal para evitar que se afloje la unidad fuente.

• Console opening dimensions

@l

Dimensions d'ouverture de la

• Dimensiones de la abertura de

. r - - - -

Stoppers

Languettes

Retenes

Hole

Trou

Orificio i lnstrument panel

Tableau de bord

Tablero de instrumentos

6

6 6

6 6

///~

Hexagonal bolt

Ecrou hexagonal

Perno hexagonal

Strap

Armature

Banda

*

This part is not provided in some models.

* Cette piece n'existe pas sur tous les modeles.

* Esta pieza no se suministra con algunos modelos.

t

Top

Haut

Parte superior

~

~

Installation direction

Sens d'installation

Direcci6n de instalaci6n

Destornillador

J

Screwdriver

Tournevis

Source Unit

Appareil pilote

Unidad fuente

Stoppers

Languettes

Retenes

Universal mounting bracket

Support de montage universel

Soporte de montaje universal

Note:

Before attaching the universal mounting bracket, slightly bend the spring toward the inside with your fingers and attach it to the side of car.

Remarque:

Avant de fixer Ie patin de ressort vers l'interieur avec voiture.

Nota:

Antes de fijar el soporte de montaje universal, doble ligeramente el resorte hacia el interior con los dedos y ffjelo en la parte lateral del autom6vil.

Figure 4/ Figure 4 I Figura 4

Bottom

Bas

Parte inferior

Outer escutcheon side view

Vue laterale de recusson exterieur

Vista lateral de la pieza ornamental exterior

Outer escutcheon

Ecusson exterieur

Pieza ornamental exterior

• Fixed Mount

(TOYOTA, NISSAN and other ISO/DIN equipped vehicles)

This unit is designed for fixed installation in the dashboard.

If

the vehicle is equipped with a factory-installed radio, install the source unit with the parts and screws marked (*) (Figure 7).

If the vehicle is not equipped with a factory-installed radio, obtain an installation kit to install the source unit in the following procedure.

Bend the stopper following the procedures below when this source unit is installed to the TOYOTA, NISSAN and other ISO/DIN equipped vehicles.

1. Bend the stopper from the source unit. (Figure 5, 6)

MO:flt::lge fixe

NISSAN et 8utres vehicules ill""\£:':l.I'!':)tIAI'''IC' ci-dessous

TOYOTA,

1. Coubez !a butee de rapparei! source. (Figure 5, 6)

ISO/DIN) une installation fixe dans Ie tableau de d'un auto-radio installe a l'usine pieces et les ecrous marquees de j d'un auto-radio installe a

I'usine se d'irlstallclticm pur installer l'appareil pilote avec la

• Montaje fijo

(Automoviles TOYOTA, NISSAN,

Y

otros provistos de normas ISO/DIN)

Esta unidad ha sido disenada para instalarse de forma fija en el tablero de instrumentos. Si el autom6vil dispone de una radio instal ada en fabrica, instale la unidad fuente con las piezas y los tornillos marcados con (*) en la Figura 7.

Si el autom6vil no dispone de una radio instalada en fabrica, adquiera un juego de instalaci6n para instalar la unidad fuente de acuerdo con el procedimiento siguiente.

Doble de instalar esta unidad en vehfculos TOYOTA, NISSAN,

Y

otoros equipados con ISO/DIN, extraiga el reten siguiendo los procedimientos indicados a continuaci6n.

1. Doble el reten procedente de la unidad fuente. (Figura 5, 6)

BEFORE BEND/AVANT LA COURBUREIANTES DE DOBLAR AFTER BEND/APRES LA COURBUREIDESPUES DE DOBLAR

STOPPERITOURNEV1S/OESTORNILLAOOR

SOURCE UNIT/APPARE!L PILOTE/UNlOAD FUENTE

Figure 5/Figure 5/Figura 5

2. Secure the mounting brackets to the chassis as shown in Figure

7. Holes are pre-tapped for TOYOTA and NISSAN vehicles; modification, such as drilling new holes, of the mounting brackets may be required for other models.

3. Wire as shown in Section 8.

4. Secure the unit in the dashboard, and then reassemble the dashboard and the center panel.

2.

l\ll;:')~}~l\l: de montEtqe sur Ie chassis CO!llme montre sur la trous sont pour les vehicules TOYOTA des modification du de nouveaux trous, modeles.

de etre comme Ie pour les

3. Cabler comrne montH~ dans la Section 8.

4.

dans Ie tableau de bord puis remonter Ie tableau panneau centraL

Mounting bracket

*

(1 pair for the left and right sides)

Support de

:J<

(1 paire, pour gauche et droite)

Soporte de montaje

*

(1 par para los lados izquierdo y derecho)

Figure 6/Figure 6/Figura 6

2. Asegure los soportes de montaje al chasis como se muestra en la Figura 7. Los orificios ya han sido taladrados en los autom6viles TOYOTA y NISSAN, pero para otros modelos puede resultar necesario realizar modificaciones, como taladrado de nuevos orificios en los soportes de montaje.

3. Conecte los cables como se muestra en la Secci6n 8.

4. Asegure la unidad al tablero de instrumentos, y despues vuelva a montar el tablero de instrumentos y el panel central.

Center Panel (Note 1)

Panneau central (Remarqure 1)

Panel central (Nota 1)

*: The parts and screws with this mark are used to install radio or included in the installation kit.

*:

The screws with this mark are originally attached to the vehicle.

Note 1: In some cases, the center panel may require some modification (trimming, filling, etc.).

Note 2: If a hook on the installation bracket interferes with the unit, bend and flatten it with a nipper or a similar tool.

*

Figure 7 / Figure 7 / Figura 7 et les vis portant cette sont utilisees pour I'aulnstalle au fournies dans Ie kit d'Hlsta!l,3.tl()n

*:

Les vis portant cette marque sont fournies d'orlgine avec Ie vehicu!e.

Remarque 2: Dans certains cas, Ie panneau central peut necessite certaines modifications (ebarbage, rernpllssage, etc.).

Remarque 2: 5i un crochet du support d'installation interfere avec

!e

tardre et l'ap!atir avec une pince au un outil

*: Las piezas y tornillos con esta marca se utilizan para instalar la radio

0 se suministran con el juego de instalaci6n.

*:

Los tornillos con esta marca estan original mente fijados a los autom6viles.

Nota 1: En algunos casos, el panel central puede requerir ciertas modificaciones (recorte, Iimado, etc.).

Nota 2: Si algun gancho del soporte de montaje interfiere con la unidad, d6blelo y aplanelo con unos alicates u otra herramienta similar.

e,;',(,'·

-4.

REMOVAL OF THE SOURCE UNIT I

1. When removing the source unit, disassemble it in the reverse of the order in Section "3. INSTALLING THE SOURCE UNIT".

2. Press the outer escutcheon upward and remove it (Figure 8).

3. Insert and lock the hook plates (Figure 9).

4. Pull the hook plates to remove the source unit.

I DESMONTAJE DE LA UNlOAD FUENTE

i.

Lors de la de la Section demonter dans rordre inverse

PILOTE".

2. Presser l'ecusson exterieur vers Ie haut et Ie retirer (Figure 8).

3. Inserer et verrouiller les plaques

a

crochet (Figure 9).

4. Tirer sur les plaques a crochet pour retirer !'appareil pilote.

1. Para desmontar la unidad fuente, r,ealice el procedimiento inverso al de la Secci6n "3. INSTALACION DE LA UNlOAD FUENTE".

2. Presione la pieza ornamental exterior hacia afuera y extraigala

(Figura 8).

3. Inserte y bloquee las placas de enganche (Figura 9).

4. Tire de las placas de enganche para extraer la unidad fuente.

Outer escutcheon

Ecusson exterieur

Pieza ornamental exterior

2-Hook plates - - - - , .

2-Plaques a crochet

2-Placas de enganche

Figure 8/ Figure 8/ Figura 8

Figure 9 / Figure 9 / Figura 9

-5

n

GAUIIONS ON WIRING I PREG UIIO S AU SUJEI DES 0 NEXIONS I PREGAUGIONES PARA LA GONEXION DE CABLES

1. Be sure to turn the power off when wiring.

2. Be particularly careful where you route the wires.

Keep them well away from the engine, exhaust pipe, etc. Heat may damage the wires.

3. If the fuse should blow, check that the wiring is correct.

If it is, replace the fuse with a new one with the same amperage rating as the original one.

4. To replace the fuse, open the lock on the source unit side, remove the old fuse and insert the new one. (Figure 10)

*

There are various types of fuse cases. Do not let the battery side terminal touch other metal parts.

1. S'assurer de meitre l'apparel! hors circuit avant de faire Ie ca

2.

oartic:ulierE)mlsnt attention lars de I'acheminement des fils.

moteur, des d'echappement, etc. La d'end()mllla~Qer ces

3.

Si

5i

4.

verifier si Ie cablage est correct.

remplacer par un fusible neuf de meme d'origine.

et loquet sur Ie

cote

Ie fusible neuf.

de boTtiers a fusibles. Ne pas en contact avec les autres pieces

1. Antes de hacer las conexiones, asegurese de desconectar la alimentaci6n de la unidad.

2. Sea especial mente cuidadoso al dirigir y fijar los cables.

mantengalos alejados del motor, tubo de escape, etc. EI calor puede danar los cables.

3. Si el fusible se quema, revise las conexiones.

Si esta quemado, reemplace el fusible por otro nuevo con el mismo valor de amperaje que el original.

4. Para reemplazar el fusible, abra la tapa de la unidad fuente, retire el fusible antiguo e instale otro nuevo.

(Figura 10)

* Existen distintos tipos de cajas de fusibles. no permita que el terminal del lado de la baterfa quede en contacto con otras partes metalicas.

Example 1

Exemple 1

Ejemplo 1

Example 2

Exemple 2

Ejemplo 2

Example 3

Exemple 3

Ejemplo3

Fuse case

Boltier a fusible

Caja de fusible

Fuse case

Boltier

a

fusible

Caja de fusible

Figure 10 I Figure10 I Figura 10

'#liM'

4'6'hll •.

n",."

-6.

GENERAL CAUTIONS I PRECAUTIONS GENERALES I PRECAUCIONES GENERALES

1. Do not open the case. There are no user serviceable parts inside.

If you drop anything into the unit during installation, consult your dealer or an authorized CLARION service center.

1. Ne pas ouvrir Ie coftret. II n'y a pas de pieces reparables par l'utilisateur a

I'interieur de I'appareil.

Si un objet est tombe dans l'appendant I'installation, consulter votre revendeur ou un serapres-vente agree CLARION.

1. No abra la caja. En el interior no hay piezas que pueda reparar el usuario. Si dentro de la unidad entra algo durante la instalaci6n, consulte a su proveedor 0 a un centro de servicio autorizado por

CLARION.

2. Use a soft, dry cloth to clean the case. Never use hard cloth, thinner, benzen, alcohol, etc. For tough dirt, apply a little cold or warm water to a soft cloth and wipe off the dirt gentry.

2.

Utiliser un chiffon doux et sec pour nettoyer Ie coffret, ne jamais utiliser un chiffon rigide, un diluant, du benzene, de I'alcool, etc.

Pour enlever la salete tenace, appliquer un peu d'eau froide ou tiede sur un chiffon doux et essuyer doucement la salete.

2. Para limpiar la caja, utilice un pano suave y seco. no use nunca un pano duro, diluidor de pintura, benceno, alcohol, etc. Para la suciedad resistente, aplique un poco de agua frfa 0 caliente a un pano suave y frote suavemente la parte sucia.

IMPORTANT:

Improper installation may cause damage to your unit or car. If you do not have the appropriate experience, consult a qualified installer. Cutting chassis wire leads voids the warranty.

IMPORTANT:

Une installation incorrecte peut endommager rappareil au Ie vehicule.

Si !'on ne possede pas les connaissances requises, consulter un installateur qualifie. Couper Ie fil du chassis annule la garantie.

IMPORTANTE:

La instalaci6n inapropiada puede causar danos en su unidad

0 su autom6vil. Si usted no posee la experiencia apropiada, consulte a un instalador cualificado. EI corte de los conductores de puesta a masa (carrocerfa) anulara la garantfa.

••

fIR,

-7

n

SAMPLE SYSTEMS I EXEMPL S DE SYST MES I EJEMPLOS DE SISTEMAS

• Example of the system using an external amplifier (Audio Visual)

III Exemple de systeme utmsant un amplificateuf exterieur. (audi(FVisuel)

• Ejemplo de sistema utilizando un amplificador externo (audiovisual)

® ®

.11

CD Source Unit

® RCA Extension Cables (sold separately)

@ 2-Channel Power Amplifier

@ 4-Channel Power Amplifier

®

Front Speakers

® Rear Speakers

® Sub-woofers

® External unit

CD

Appareil pilote

·······&5····

····C€1hi·e·s···p·ro·i·o·n~iaie·lJ"r····R·(j"A····(·v·e·n'au"'s-~i)"a'r~'me'nty"

@ Amplificateur de puissance 2 canaux

@ Amplificateur de puissance 4 canaux

(§) Haut-parleurs avant

®

Haut...parleurs arriere

® Sub-woofers

......®

Aiipare"i"f'externe

.·kI",'·

CD Unidad fuente

® Cables prolongadores RCA (vendidos aparte)

® Amplificador de potencia de 2 canales

@ Amplificador de potencia de 4 canales

® Altavoces delanteros

® Altavoces traseros

® Altavoces de subgraves

®

Unidad externo

'w®.

••$1

,i.'.

-8.

WIRE CONNECTIONS

I

CONNECTIQUE

I

CONEXION DE CABLES

• Rear Layout

III Disposition arriere

• Disposici6n trasera

No.

Description

CD

AUX INPUT RIGHT (Red)

®

AUX INPUT LEFT (White)

®

FRONT RIGHT (Red)

@

FRONT LEFT (White)

®

REAR RIGHT (Red)

®

REAR LEFT (White)

No.

Description

CD

ENTREE AUX droite (Rouge)

®

ENTREE AUX gauche (Blanc)

@)

AVANT DROIT (Rouge)

(1]

AVANT GAUCHE (Blanc)

@)

ARRIERE DROIT (Rouge)

®

ARRIERE GAUCHE (Blanc)

No.

Description

CD

Entrada auxiliar (AUX INPUT) del canal derecho (Rojo)

®

Entrada auxiliar (AUX INPUT) del canal izquierdo (Blanco)

®

DELANTERO DERECHO (Rojo)

@ DELANTERO IZQUIERDA (Blanco)

®

TRASERO DERECHO (Rojo)

®

TRASERO IZQUIERDA (Blanco)

Antenna

Antenne

Antena

CD

®

®

@

®

l - -

16-pin connector

Connecteur 16 broches

Conector de 16 contactos

16-Pin Connector Extension Lead

(attached to the source unit)

FiJ prolongateur-connecteur 16 broches

~(attache sur I'appareil pilote)

Cable prolongador de 16 contactos

(fijado a la unidad fuente)

Front Right

Avant droit

Delantero derecho

+ Grey

+ Gris

+ Gris

- Grey/Black

- Gris/noir

- Gris/negro

Systeme

4-Speaker system

a

4 haul-parJeurs

Sistema con 4 altavoces

Front Left

Avant gauche

Delantero izquierdo

Rear Right

Arriere droit

Trasero derecho

+ Purple

+ Pourpre

+ Purpura

- Purple/Black

- Pourpre/noir

- Purpura/negro

Rear Left

Arriere gauche

Trasero izquierdo or o

Systeme

2-Speaker system a

:2 haut-parleurs

Sistema con 2 altavoces

Right

Droit

Derecho

+ Grey

+ Gris

+ Gris

- Grey/Black

- Gris/noir

- Gris/negro

Left

Gauche

Izquierdo

Not used.

Insulate each wire.

Inutilise.

Isoler chaque fil.

No se utiliza.

Aisle todos los conductores.

+ Purple

+ Pourpre

+ Purpura

- Purple/Black

- Pourpre/noir

- Purpura/negro

+ White

+ Blanc

+ Blanco

- White/Black

- Blanc/noir

- Blanco/negro

+ Green

+ Vert

+ Verde

- Green/Black

- Vert/noir

- Verde/negro

Orange/White wire (Illumination lead)

Fil orange/blanc (fil d'eclairage)

Conductor anaranjado/blanco (conductor de alimentaci6n)

Yellow wire (Memory back-up lead)

Fil jaune (fil de soutien memoire)

Conductor amarillo (Conductor ~e protecci6n de la memoria)

Connect directly to battery.

Brancher directement a la baUerie.

Conectelo directamente a la baterfa.

Fuse (15 A)

Fusible (15 A)

Fusible (15 A)

Red wire (Power lead)

Fil rouge (til d'alimentation)

Conductor rojo (Conductor de alimentaci6n) Accessory + 12 V

Accessoire +12 V

Accesorio +12 V

+ White

+ Blanc

+ Blanco

- White/Black

- Blanc/noir

- Blanco/negro

Blue/White wire (Power Antenna turn-on lead)

Fil bleu/blanc (fil de mise sous tension d1antenne electrique)

Conductor azul/blanco (Conductor de conexi6n de la alimentaci6n de la antena motorizada)

Connect to remote turn-on lead of Power Antenna. (0.5 A current max.)

Connectez Ie til de mise sous tension tEdecommandable de I'antenne electrique. (Courrant maximum de 0,5 A)

Conectelo al conductor de conexi6n automatica de la alimentaci6n de la antena motorizada. (corriente maxima de 0,5 A)

+ Green

+ Vert

+ Verde

- Green/Black

- Vert/nair

- Verde/negro

Black wire (Ground lead)

Fil noir (til de terre)

Conductor negro (Conductor de puesta amasa)

Connect to vehicle chassis ground.

Brancher a la terre du chassis du vehicule.

Conectelo a una parte metalica del chasis del vehfculo.

Clarion

Co.,

Ltd.

281-0632-00 2005/9

CLARION 2006 LIMITED WARRANTY

For USA and Canada only

Except as noted, Clarion products purchased from an authorized Clarion dealer are warranted against all defects in materials and workmanship for a period of one (1) year from the date of original purchase.

The following Clarion products noted below ** are warranted against all defects in materials and workmanship for a two

(2) year period from the date of original purchase when purchased from AND installed by an authorized Clarion dealer.

** DRZ9255 DXZ865MP D~Z765MP DXZ665MP DXZ465MP DFZ675MC DPX11500 DPX1800 DPX2250

All Clarion cables, wires and other accessories if purchased from an authorized Clarion dealer are warranted against all defects in materials and workmanship for ninety (90) days from the date of original purchase,

ALL PURCHASES OF CLARION PRODUCTS FROM NON-AUTHORIZED CLARION DEALERS ARE SUBJECT

TO FURTHER WARRANTY RESTRICTIONS AS DESCRIBED BELOW.

The conditions of this Limited Warranty and the extent of responsibility of Clarion Corporation of America ("Clarion n

) under this Limited Warranty are as follows:

1. PROOF OF DATE OF PURCHASE FROM AN AUTHORIZED CLARION DEALER WILL BE REQUIRED FOR

WARRANTY SERVICE OF THIS PRODUCT. IN THE CASE OF THE TWO (2) YEAR LIMITED WARRANTY FOR THE

CLARION PRODUCTS NOTED ABOVE, PROOF OF DATE OF PURCHASE AND PROOF OF INSTALLATION BY AN

AUTHORIZED CLARION DEALER IS REQUIRED. INFORMATION ABOUT CLARION AUTHORIZED WARRANTY

SERVICE CENTERS MAY BE OBTAINED BY CONTACTING CLARION AT THE ADDRESS LISTED BELOW.

2. This Limited Warranty will become void if service performed by anyone other than an approved Clarion Warranty

Service Center results in damage to the products.

3.

This Limited Warranty does not apply to any product which has been subject to misuse, neglect or accident, or which has had the serial number altered, defaced or removed, or which has been connected, installed, adjusted or repaired, other than in accordance with the instructions furnished by Clarion.

4, This Limited Warranty does not cover car static or other electrical interferences, tape head or laser pick-up cleaning or adjustments, or labor costs for the removal or reinstallation of the unit for repair.

5.

The sole responsibility of Clarion under this Limited Warranty shall be limited to the repair of the products or replacement of the product, at the sole discretion of Clarion.

6.

Product must be shipped in its original carton or equivalent carton, fully insured j with shipping charges prepaid.

Clarion will not assume any responsibility for any loss or damage incurred in shipping.

7. CLARION PRODUCTS PURCHASED FROM A SOURCE OTHER THAN AN AUTHORIZED CLARION DEALER,

INCLUDING ANY AND ALL PURCHASES VIA THE INTERNET FROM A NON INTERNET AUTHORIZED

CLARION DEALER, SHALL NOT BE COVERED BY ANY CLARION LIMITED WARRANTY TO THE EXTENT

ALLOWED BY APPLICABLE LAW. IN THE EVENT AND TO THE EXTENT APPLICABLE LAW PROHIBITS

ELIMINATION OF WARRANTIES UNDER THESE CIRCUMSTANCES, THE APPLICABLE LIMITED WARRANTY

PERIOD SHALL BE DEEMED TO BE FIFTEEN (15) DAYS FROM THE DATE OF ORIGINAL PURCHASE.

8. ALL IMPLIED WARRANTIES EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW SHALL HAVE NO

GREATER DURATION THAN THE WARRANTY PERIOD SET FORTH ABOVE. UNDER NO CIRCUMSTANCES

SHALL CLARION BE LIABLE FOR ANY LOSS OR DAMAGE, DIRECT OR CONSEQUENTIAL, ARISING OUT

OF THE USE OR INABILITY TO USE THE PRODUCT. BECAUSE SOME STATES 00 NOT ALLOW LIMITATIONS

ON HOW LONG AN IMPLIED WARRANTY LASTS OR EXCLUSIONS OR LIMITATIONS OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES, THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.

9. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS

WHICH VARY FROM STATE TO STATE.

10.

The laws of the State of California shall govern and control this limited warranty, its interpretation and enforcement.

11.

Should you have any difficulties with the performance of this product during the warranty period, please call Clarion or visit our web site for a listing of Authorized Warranty Service Centers in your area, You may also contact the

Clarion Customer Service at the address listed below for any service help you may need with Clarion products.

In USA:

Clarion Corporation of America

Attn:Customer Service Manager

661 W. Redondo Beach Blvd

Gardena, CA.90247..4201

1-800..GO-CLARION www.clarion.com

In Canada:

Clarion Canada Inc,

Warranty Service Center

2239 Winston Park Drive

Oakville, Ontario L6H 5R 1

(905) 829-4600 www.clarioncanada.com