иНсТрУкЦиЯ По МоНТажУ и ЭксПлУаТаЦии ключ-кНоПки KEYSWICH
1. НазНачеНие
Ключ-кнопка KEYSWITCH используется для подачи управляющей команды на блок управления приводом. Наличие микропереключателя позволяет посылать один управляющий сигнал в пошаговом режиме. Для подачи команды поверните ключ, управляющий контактами микропереключателей. Отпустите ключ - он вернется в первоначальную позицию.
2. ТехНические харакТерисТики
Тип контакта
Номер контакта
Питание степень защиты
Установка диапазон рабочих температур
NO/NC
1
0,1 A/24 V dc
IP 54
Накладной монтаж
-40 °С ... +50 °С
3. МоНТаж
Проведите кабель и закрепите корпус кнопки, используя поставляемые шурупы и дюбели. Кнопки KEYSWITCH имеют механическую блокировку, которая не позволяет устанавливать или вынимать крышку из корпуса, без установленного и повернутого ключа.
4. ПодключеНие
Подсоедините необходимые электрические провода к клеммному блоку микропереключателя.
1 - СОМ контакт, 2 - NO контакт, 3 - NC контакт.
1 2 3 1 2 3
COM NO NC COM NO NC
1 2 3 1 2 3
COM NO NC COM NO NC
Компания “DoorHan” благодарит Вас за приобретение нашей продукции. Мы надеемся, что Вы останетесь довольны качеством данного изделия. По вопросам приобретения, дистрибьюции и технического обслуживания обращайтесь в офисы региональных представителей или центральный офис компании по адресу: россия, 143002 Московская обл., одинцовский район, с. акулово, ул. Новая, д. 120
Тел: +7 (495) 933–2400, 981–1133
E-mail: [email protected]
www.doorhan.ru
InStallatIon ManUal
KEYSWICH
EC DEClaratIon of ConforMItY
We: DoorHan Europe s.r.o.
Bozeny Nemcove 1689, 43201 Kadan, Ceska Respublika Herewith declare under sole responsibility that:
• Declares that:
The device model KEYSWITCH
• complies with the essential safety requirements of the following directives:
73/23/EEC and subsequent amendment 93/68/EEC
89/336/EEC and subsequent amendment 92/31/EEC and 93/68/EEC additional note:
These products have undergone tests in a typical uniform configuration
(all products manufactured by DoorHan Europe s.r.o.)
01/03/2010 Managing Director
Date signature
1. DESCrIptIon
Keyswitch is used to actuate automation devices:
Single microswitch allows just one control signal to be sent.
Two microswitches allows two different control signals to be sent.
Turning the key operates the microswitch contact.
When released, the key returns to its original position
2. tECHnICal SpECIfICatIonS
Switch type power
Class Ip
Installation type temperature range
NO/NC
0,1 A/24 V dc
IP 54 on the surface
-40 °С ... +50 °С
3. InStallatIon
Screw the bottom plate to a desired point on the wall. Get the cables in through the hole in the bottom. Turn the key clockwise while putting the locking pins of the upper cover into the holes of the bottom plate, then push the upper side of the cover to lock with the bottom plate.
4. ConnECtIonS
Connect the Keyswitch to the impulse exit of the opener.
1 2 3 1 2 3
COM NO NC COM NO NC
1 2 3 1 2 3
COM NO NC COM NO NC