7406_1_00000
PMP980S/PMP960M
Powered Mixers
6/10 x 2 Live
Powered Mixers
EUROPOWER — 900-Watt 10-Channel/6-Channel
Mixer with FX
PMP980S: Ultra-compact 2 x
450-Watt stereo powered mixer
PMP960M: Ultra-compact 2 x
450-Watt dual mono
powered mixer
Revolutionary amplifier
technology: enormous power,
incredible sonic performance and
super-light weight
PMP980S: 10-channel mixer
section features 6 mono channels
and 2 stereo channels plus
separate tape returns
PMP960M: 6 mono channels
plus separate tape returns
2 studio-grade 24-bit
stereo FX processors with
100 awesome presets
FBQ Feedback Detection system
instantly reveals critical frequencies
for easy feedback removal
8/6 high-quality mic preamps with
switchable +48 V phantom power
for condenser microphones
Effective, extremely musical 3-band
EQ, switchable Pad and Clip LEDs
on all mono channels
Stereo 7-band graphic EQ allows
precise frequency correction of
monitor and main outputs
Speaker Processing function
adjusts frequency response
to match professional speaker
systems like BEHRINGER
EUROLIVE series
behringer.com
If you need superior sound
quality for small club gigs,
churches or speeches, but have
to keep the outboard gear to
a minimum, get ready to love
the PMP980S and PMP960M.
The 900-Watt, 10-channel/6-channel
mixers give you everything you
need in one efficient, highly
portable little package.
Massive mono or stunning stereo
The difference between these two
mixers is that the PMP980S gives you
two stereo channels. If you make your
beer money playing in a bluegrass
band at a barbecue joint, you probably
aren’t that interested in making a
space-age, multi-dimensional mix.
This is just one example of where the
PMP960M’s six mono channels would
be a perfect match.
However, if you’re the brains
behind a kraut-rock band with the
wildest patches this side of Berlin, the
two additional stereo channels on
the PMP980S will provide the sonic
latitude you need.
The PMP980S is also an excellent
choice for a church, where vocals and
stereo recordings share face time.
Continued on next page
Page 2 of 6
PMP980S/PMP960M
6/10 x 2 Live
Powered Mixers
Loudspeaker (monitor mix)
FOOTSW
MONITOR
TIP = FX 1
RING = FX 2
Dual Footswitch
FX
UTPUT
PMP980S Front Panel
(Excerpt)
WATTS
WATTS
2 x BEHRINGER
B312A (Active)
Classic control, state-of-the-art sound
Each of the mic inputs on the PMP980S
and PMP960M contains top-quality built-in
mic preamps with switchable +48V phantom
power for condenser mics—just like in our
studio mixers. Suddenly you can leave the
mic preamps at home, and the kind of sound
quality that was once only available in the
studio is ready to go wherever you do.
Plus with dual 24-bit FX processors built
right in, you get 100 mind-blowing digital effect
presets such as delay, chorus and reverb that
you can apply two-at-a-time to any channel you
like, as well as to the monitors and main output.
No outboard gear needed!
These mixers come loaded with BEHRINGER’s
amazing FBQ feedback detection system, which
automatically pinpoints trouble frequencies
so you can snuff them out before you—or the
audience—go deaf. Just touch a button and
watch as trouble frequencies are indicated by
red LEDs on the 7-band graphic EQ.
The Ins and Outs
The PMP980S and PMP960M give you loads
of flexibility in accommodating whatever the
center of attention happens to be. Channels
1-6 of both mixers are for mics, bass guitars
or other mono instruments. The PMP980S
features channels 7-8 and 9-10, which can
be used as stereo channels. In the case of the
PMP980S, that means you can connect up to
8 microphones or other mono instruments or
six mics or mono instruments along with two
stereo instruments (keyboards, for
example) or the A/V equivalent.
In the bottom right corner of the
mixer, you’ll find the FX, INPUT TO
MAIN and OUTPUT sections. The FX
section features a FOOTSW(itch) input.
This lets you connect a footswitch like
the AB200 so you can remotely
enable/disable either FX channel. FX
OUT 1 & 2 are used to connect up to
two outboard effects processors.
The AUX IN ¼" inputs in the INPUT
TO MAIN section allow you to route an
external stereo signal to the main mix.
The AUX IN control adjusts the volume
of the external signal in the main mix.
Use the 2TR IN RCA inputs to feed in
external stereo signals from CD players
or tape decks. The VOICE CANCELLER
switch allows you to eliminate the
vocals from pre-recorded music for
karaoke applications.
In the OUTPUT section, the REC
OUT RCA outputs send line-level
signals from the mixer to a recording
device, so you can finally get to work
on that triple-live album you’ve always
dreamed of. The MAIN ¼" connectors
are there just in case you want to
connect more amps. Connect your
monitor power amps or active monitor
speakers to the MONITOR output.
Channel your inner sound guru
You’ll be operating this mixer like
it’s second nature thanks to its simple,
intuitive layout. Each channel has
a three-band EQ (HIGH, MID, LOW)
blue; MON(itor) level in gray; FX1 in
red; FX2 in orange; PAN in black (only
PMP980S); LEVEL in white. There’s also
a switchable PAD and CLIP LED
per channel.
Once you’ve set the levels on
individual channels, it’s easy to create
your MAIN and MONITOR mixers.
The MAIN and MONITOR sections are
nearly identical, featuring graphic
7-band EQs that allow you to adjust
the sound to the room acoustics.
This is where the FBQ feature comes
in particularly handy. Press the FBQ
IN switch to activate the Feedback
Detection System. Trouble frequencies
are indicated by brightly lit fader LEDs.
Just lower the level of the respective
frequency range until feedback
disappears and the LED goes out.
The FX RET controls add the
selected effect signal to the main
or monitor mix. When both are
completely counterclockwise, no effect
is applied. The 2TR IN control adjusts
the volume of the 2 Track signal, if you
have connected one.
Continued on next page
Page 3 of 6
PMP980S/PMP960M
Front Panel
6/10 x 2 Live
Powered Mixers
EUROPOWER PMP980S
ON /
OFF
450W
450W
INPUT TO MAIN
OUTPUT
Stereo Channel 7/8
Tape In/Out
Mono Channels 1-4
energyXT2.5
DAW software
available separately
Use the MAIN MASTER/MONITOR MASTER
controls to adjust the main and monitor
output signals, respectively. The 5-digit LED
meters give you a visual representation of
these volumes. The upper LIM LED illuminates
when output levels are too high, activating the
internal amp protection circuit.
The POWER AMP switch toggles between
the PMP980S’s three operating modes: stereo,
mono and bridge (the power outputs of A and
B on the back panel are added and provided at
OUTPUT B).
Directly below, you’ll find the SPEAKER
PROCESSING switch that activates a filter,
adapting the mixer to your loudspeakers.
If your speakers have a limited frequency
response in the bass range, the PMP980S can
adapt itself to them.
Finally, the STANDBY switch lets you mute
all input channels during breaks, preventing
the microphones from picking up noise
or interference. You can leave all faders
untouched while you play a CD via the
CD/TAPE inputs.
FX
Mono Channel 6
Mono Channel 5
Computer Tower with
Multi-channel Soundcard
Vocal Mics
Electric
Bass
V-AMP 3
Electric
Guitar
DI box
Keyboard
Small, simple, superb
Small, simple events call for a lightweight,
simple powered mixer, and these are the most
efficient, affordable mixers for the job. They’re
easy to learn, easy to operate, and with so
many incredible built-in features, they make it
easy to put on a show in an instant.
Loudspeaker (F.O.H. mix)
PMP980S Rear Panel
(Excerpt)
2 x BEHRINGER EUROLIVE Stack (VP1800S & B212XL, both passive)
Page 4 of 6
PMP980S/PMP960M
6/10 x 2 Live
Powered Mixers
7-band graphic EQ
FX adjust effects
return level in main
signal.
PROGRAM dial
selects FX presets.
4-segment
MONITOR LEVEL
meter.
FBQ switch
FX adjusts
effects return
level in
monitor.
CD/TAPE IN adjusts
CD/TAPE signal in
monitor.
OUTPUT A & B connect to PA speakers.
FX IN switch
activates FX
processor.
6
HIGH
7/ 8
HIGH
0
9/10
HIGH
0
0
GRAPHIC EQ WITH FBQ FEEDBACK DETECTION
HIGH EQ.
MID
+15
0
–15
MID
+15
0
–15
MID
+15
+3
0
LOW
+15
0
–15
LOW
+15
0
–15
LOW
–12
+15
–12
0
63
160
400
1k
2.5k
6.3k
LOW EQ.
+15
MON
10
FX 1
10
FX 2
OFF
0
10
FX 1
MONITOR
MASTER
+15
0
0
10
FX 1
0
10
POWER AMP
CD /
TAPE
IN
FX
RET 2
0
10
10
A
0
10
MONITOR
0
10
FX 2
0
10
FX 2
(PUSH)
PROGRAM
+12
B
MAIN L
MON
MAIN R
MONO
0
0
10
PAN
0
10
PAN
+3
10
FX 1
–12
–12
63
160
400
1k
2.5k
6.3k
16k
L
L
R
LEVEL
5
L
R
LEVEL
5
(PUSH)
PROGRAM
10
0
6
CLIP
PAD
HI – Z
10
LINE
L
L
(MONO)
(MONO)
0
10
FX OUT
0
8/6 MONO
channels, bal
XLR IN.
INVISIBLE MIC PRE
CD / TAPE
IN
(MONO)
FOOTSW
L
REC
OUT
STANDBY switch mutes all input channels.
10
FX
R
OFF
L
VOICE CANCELER switch eliminates vocals
from CD/TAPE IN signal.
R
INPUT TO MAIN
MAIN ¼" jacks send signal to external
amplifier.
L
MONITOR
(STEREO)
(STEREO
STEREO)
TIP = FX 1
RING = FX 2
INVISIBLE MIC PRE
0
MAIN MASTER dial control main signal
volume.
MAIN
L
¼" bal/unbal input.
INVISIBLE MIC PRE
10
ON /
10
AUX IN
2
MIC
0
10
VOICE
CANCELLER
1
R
4-segment MAIN LEVEL meter.
MAIN
FX OUT
MIC
0
10
FX 2
9 / 10
LINE
R
LOW – Z
0
7/8
STANDBY
(CH 1–10 MUTE)
CD /
TAPE
IN
FX
RET 2
FX
RET 1
FX 2 IN
0
POWER AMP switch toggles between
STEREO, MONO and BRIDGED mode.
SPEAKER PROCESSING switch activates
filter, adapting mixer to loudspeakers.
ON
OFF
R
MAIN
MASTER
R
5
–10
L
FBQ IN
LEVEL
BEHRINGER
SPEAKER
PROCESSING
0
0
MONITOR MASTER dial controls monitor
signal volume.
–5
FX 1 IN
PAN
BRIDGE
AMP MODE
LIM
+12
0
Channel signal
LEVEL control.
PAD switch reduces
input sensitivity by
20 dB.
–15
MON
PHANTOM POWER switch for using
condenser mics.
+48 V
GRAPHIC EQ WITH FBQ FEEDBACK DETECTION
0
CLIP LED.
+15
FX
RET 1
0
PAN adjusts
channel signal
in stereo image
(PMP980S only).
–15
MON
–10
16k
FBQ IN
–15
FX 2 controls level
of signal to FX 2
(PMP980S only).
PHANTOM
–5
–15
FX 1 controls level
of signal to FX 1.
0
0
0
MID EQ.
MON adjusts signal
level to monitors.
LIM
+12
+12
–15
R
450W
R
OUTPUT
450W
¼" MONITOR output connects to power
amplifiers or active monitor speakers.
SEE REAR PANEL CAUTION
RCA CD/TAPE IN and REC OUT jacks.
Left and right bal/
unbal line level
¼" TRS inputs for
stereo channels
(PMP980S only).
FX OUT 1&2 ¼"
jacks connect
to outboard
equipment
(PMP960M has a
single FX OUT).
FOOTSW(itch)
input.
AUX IN dial adjusts external
signal level in main mix.
AUX IN ¼" inputs route external stereo
signal to main mix (PMP960M has only
one AUX IN).
Page 5 of 6
PMP980S/PMP960M
6/10 x 2 Live
Powered Mixers
SPECIFICATIONS
Max. input level
Type
Impedance
Max. input level
PMP980S
MICROPHONE INPUTS
Type
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ohm source resistance
@ 50 Ohm source resistance
@ 150 Ohm source resistance
Frequency response
Gain
Max. input level
Impedance
Signal-to-noise ratio
Noise (THD + N)
MONO LINE INPUTS
Type
Impedance
Max. input level
STEREO LINE INPUTS
Type
XLR, electronically balanced
input circuit
–112 dB / 114 dB A-weighted
–112 dB / 114 dB A-weighted
–112 dB / 114 dB A-weighted
< 10 Hz - 200 kHz (–1 dB)
< 10 Hz - > 200 kHz (–3 dB)
+12 dBu @ +10 dB gain
+12 dBu @ +10 dB gain
approx. 2.2 kΩ balanced /
1.1 kΩ unbalanced
110 dB / 114 dB A-weighted
(0 dBu In @ +10 dB gain)
0.001% / 0.0007%
A-weighted
¼" TS connectors, balanced
approx. 20 kΩ, balanced
+21 dBu
Impedance
Max. input level
EQUALIZER
Low
Mid
High
80 Hz / ±15 dB
2.5 kHz / ±15 dB
12 kHz / ±15 dB
2 TRACK INPUT
Type
Impedance
RCA
approx. 10 kΩ
Impedance
Max. output level
MONITOR
Type
Impedance
Max. output level
STEREO OUTPUTS
Type
Impedance
Channel fader -oo
MAIN MIX @ 0 dB
Channel fader -oo
MAIN MIX @ 0 dB
Channel fader @ 0 dB
LOUDSPEAKER OUTPUTS
Type
Load impedance:
MAIN L/R
MONITOR/MAIN MONO
MAIN MONO/MAIN MONO
BRIDGE
DIMENSIONS/WEIGHT
Dimensions (H x W x D)
–102 dB / –106 dB
A-weighted
–102 dB / –106 dB
A-weighted
–88 dB / –91 dB A-weighted
–88 dB / –91 dB A-weighted
–84 dB / –86 dB A-weighted
–84 dB / –86 dB A-weighted
PMP960M
Professional speaker
connector
4 - 8 Ohm
4 - 8 Ohm
4 - 8 Ohm
8 - 16 Ohm
¼" TS connectors,
unbalanced
approx. 150 Ω, unbalanced
+21 dBu
¼" TS connectors,
unbalanced
approx. 150 Ω,
unbalanced
+21 dBu
¼" TRS connectors,
unbalanced
approx. 150 Ω, unbalanced
Weight
MICROPHONE INPUTS
Type
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ohm source resistance
@ 50 Ohm source resistance
@ 150 Ohm source resistance
Frequency response
Gain
Max. input level
Impedance
Signal-to-noise ratio
Noise (THD + N)
DSP
Converter
¼" TRS connectors,
unbalanced
approx. 100 kΩ, unbalanced
+21 dBu
PREAMP OUTPUTS
MAIN
Type
MAIN MIX SYSTEM DATA
Noise:
MAIN MIX @ -oo
+21 dBu
RCA
approx. 1 kΩ
+21 dBu
24-bit Delta-Sigma,
64/128-times
oversampling
Dynamics D/A
90 dB
Sampling rate
40 kHz
Delay Time
max. 5 secs
Signal run time (Line In > Line Out) approx. 1.5 ms
12.4 in x 18.1 in x 8.7
in 315 mm x 460 mm x
220 mm
10.3 kg
22.7 lb
XLR, electronically balanced
input circuit
–112 dB / 114 dB A-weighted
–112 dB / 114 dB A-weighted
–112 dB / 114 dB A-weighted
< 10 Hz - 200 kHz (–1 dB)
< 10 Hz - > 200 kHz (–3 dB)
+12 dBu @ +10 dB gain
+12 dBu @ +10 dB gain
approx. 2.2 kΩ balanced /
1.1 kΩ unbalanced
110 dB / 114 dB A-weighted
(0 dBu In @ +10 dB gain)
0.001% / 0.0007%
A-weighted
MONO LINE INPUTS
Type
Impedance
Max. input level
¼" TS connectors, balanced
approx. 20 kΩ, balanced
+21 dBu
STEREO LINE INPUTS
Type
Impedance
Max. input level
-
OUTPUT POWER
RMS @ 1% THD, both channels driven:
8 Ohm per channel
200 W
4 Ohm per channel
310 W
RMS @ 1% THD, bridged mode:
8 Ohm
615 W
Peak Power, both channels driven:
8 Ohm per channel
275 W
4 Ohm per channel
450 W
Peak Power, bridged mode:
8 Ohm
900 W
EQUALIZER
Low
Mid
High
80 Hz / ±15 dB
2.5 kHz / ±15 dB
12 kHz / ±15 dB
2 TRACK INPUT
Type
Impedance
RCA
approx. 10 kΩ
POWER SUPPLY
Power Consumption
Fuse 100 - 120 V~, 50/60 Hz
Fuse 220 - 240 V~, 50/60 Hz
Mains connector
Impedance
Max. output level
MONITOR
Type
DISPLAY
Type
2 x 2-digit,
7-segment LED
max. 1000 W
T 10 A H 250 V
T 6.3 A H 250 V
IEC standard receptacle
PREAMP OUTPUTS
MAIN
Type
Impedance
¼" TS connectors,
unbalanced
approx. 150 Ω, unbalanced
+21 dBu
¼" TS connectors,
unbalanced
approx. 150 Ω,
unbalanced
Page 6 of 6
PMP980S/PMP960M
6/10 x 2 Live
Powered Mixers
Max. output level
+21 dBu
Type
STEREO OUTPUTS
Type
Impedance
Max. input level
Type
Impedance
Max. input level
RCA, mono output
approx. 1 kΩ
+21 dBu
Load impedance:
MAIN L/R
MONITOR/MAIN MONO
MAIN MONO/MAIN MONO
BRIDGE
MAIN MIX SYSTEM DATA
Noise:
MAIN MIX @ -oo
Channel fader -oo
MAIN MIX @ 0 dB
Channel fader -oo
MAIN MIX @ 0 dB
Channel fader @ 0 dB
LOUDSPEAKER OUTPUTS
–102 dB / –106 dB
A-weighted
–102 dB / –106 dB
A-weighted
–88 dB / –91 dB A-weighted
–88 dB / –91 dB A-weighted
–84 dB / –86 dB A-weighted
–84 dB / –86 dB A-weighted
Professional speaker
connector
8 Ohm per channel
4 Ohm per channel
4 - 8 Ohm
4 - 8 Ohm
8 - 16 Ohm
RMS @ 1% THD, bridged mode:
8 Ohm
Peak Power, both channels driven:
8 Ohm per channel
4 Ohm per channel
275 W
450 W
Peak Power, bridged mode:
8 Ohm
900 W
POWER SUPPLY
Power Consumption
Fuse 100 - 120 V~, 50/60 Hz
Fuse 220 - 240 V~, 50/60 Hz
Mains connector
max. 1000 W
T 10 A H 250 V
T 6.3 A H 250 V
IEC standard receptacle
DSP
Converter
24-bit Delta-Sigma,
64/128-times
oversampling
Dynamics D/A
90 dB
Sampling rate
40 kHz
Delay Time
max. 5 secs
Signal run time (Line In > Line Out) approx. 1.5 ms
DISPLAY
Type
2-digit, 7-segment LED
OUTPUT POWER
RMS @ 1% THD, both channels driven:
Order via the BEHRINGER 24/7 Dealer Portal or contact the BEHRINGER location nearest you:
BEHRINGER Australia tel.: +61 3 9877 7170, fax: +61 3 9877 7870 BEHRINGER Germany tel.: +49
2154 9206 4149, fax: +49 2154 9206 4199 BEHRINGER Japan tel.: +81 3 5281 1180, fax: +81 3 5281
1181 BEHRINGER Singapore tel: +65 5845 1800, fax: +65 6214 0275 BEHRINGER USA / CANADA
tel: +1 425 672 0816, fax: +1 425 673 7647
DIMENSIONS/WEIGHT
Dimensions (H x W x D)
Weight
200 W
310 W
615 W
12.4 in x 18.1 in x 8.7 in
315 mm x 460 mm x 220 mm
10.3 kg
22.7 lb
behringer.com
©2009 BEHRINGER International GmbH. All rights reserved. All trademarks (except BEHRINGER, the BEHRINGER logo, JUST LISTEN, EUROPOWER, FBQ and EUROLIVE) mentioned belong to their respective owners and are not affiliated with
BEHRINGER. Mac and Mac OS are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. ASIO is a trademark and software
of Steinberg Media Technologies GmbH. VST is a trademark of Steinberg Media Technologies GmbH. AMD is a trademark or registered trademark of Advanced Micro Devices, Inc. Intel is a trademark or registered trademark of Intel Corporation or
its subsidiaries in the United States and other countries. energyXT2, energyXTC and the energyXT logo are trademarks of XT Software AS incorporated in Norway, and are protected under the laws of Norway, and are being used under license by
Behringer Holdings (Pte) Ltd and related companies. FOR INTERNAL USE BY BEHRINGER DEALERS ONLY. DO NOT DISTRIBUTE. 985-10000-00393
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising