C-WNAP-6305v2
WNAP-6305
2.4GHz 802.11n Wireless Indoor/Outdoor Access Point
High Power Wireless Coverage
PLANET Technology introduces the latest high power wireless LAN solution - the wireless AP, WNAP6305. It provides higher transmit power, better performance, and widely coverage. The WNAP6305 is compatible with IEEE 802.11b/g/n standard and the data rate support is up to 150Mbps in
802.11n mode. The WNAP-6305 not only has built-in panel Antenna but also reserves one RP-SMA
Type Antenna Connector to allow versatile antenna installations and multiple adjustable transmit output
power controller. Therefore, the WNAP-6305 is quite suitable for widely open space applications.
Multiple Operating & Wireless Modes
The WNAP-6305 supports multiple wireless communication connectivity (AP / Client CPE / WDS PtP / WDS PtMP / Repeater / Universal Repeater), allowing for
various application requirements that gives user more comprehensive experience when using WNAP-6305. It also helps user to easily build wireless network and
extend the wireless range of existed wireless network.
The WNAP-6305 also supports WISP mode, so CPE users could easily connect to Internet via WISP provider or connect to a wired network.
AP / Client Mode
AP
Internet
WNAP-6305
WDS Repeater Mode
AP
Client
WNAP-6305
Internet
AP
AP
WNAP-6305
Switch
Clients
WDS Bridge - PtMP Mode
WDS Bridge - PtP Mode
Client
AP
AP
WNAP-6305
WNAP-6305
Switch
Client
Client
AP
AP
Client
AP
Switch
WNAP-6305
Switch
Switch
Advanced Security and Management
In aspect of security, besides 64/128- bit WEP encryption, the WNAP-6305 integrates WPA / WPA2, WPA-PSK / WPA2-PSK and 802.1x authority to secure and
protect your wireless LAN. The wireless MAC filtering and SSID broadcast control consolidate the wireless network security and prevent unauthorized wireless
connection.
Data Sheet
1
WNAP-6305
Highly Reliable Device
The WNAP-6305 is perfectly suitable to be installed in environments and exposed locations. With its IP 55 casing protection, the WNAP-6305 can perform
normally under rigorous weather conditions including heavy rain and wind. With the proprietary Power over Ethernet (PoE) design, the WNAP-6305 can
be easily applied in the areas where power outlets are not available. It is the best way using the WNAP-6305 to build wireless access applications between
buildings on campuses, business, rural areas and etc.
Key Features
Industrial Compliant Wireless LAN & LAN
Secure Network Connection
•• Compliant with IEEE 802.11n wireless technology capable of up to
•• Supports Software Wi-Fi Protected Setup (WPS)
150Mbps data rate
•• Advanced security: 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-
•• Backward compatible with 802.11b/g standard
PSK(TKIP/AES), and 802.1x Authentication
•• Equipped with 10/100Mbps RJ-45 Ports for LAN & WAN, Auto MDI/
•• Supports NAT firewall features, with SPI function to protect against
MDI-X supported
DoS attacks
•• Supports IP / Protocol-based access control and MAC Filtering
Fixed-network Broadband Router
•• Supported connection types: Dynamic IP/ Static IP / PPPoE / PPTP /
Easy Installation & Management
L2TP
•• Web-Based UI and Quick Setup Wizard for easy configuration
•• Supports multiple sessions IPSec, L2TP and PPTP VPN passthrough
•• Remote Management allows configuration from a remote site
•• Supports Virtual Server, DMZ and Port Forwarding for various
•• System status monitoring includes DHCP Client and System Log
networking applications
•• Supports DHCP Server, UPnP, and Dynamic DNS
RF Interface Characteristics
•• Built-in Directional Antenna
•• High Output Power with multiple adjustable transmit power control
•• Reserve RP-SMA Type Connector
Environmental Characteristics
•• IP-55 Enclosure
FP Ant.
•• Passive Power Over Ethernet Design
•• Reset Button on PoE Injector
•• Operating Temperature: -20~70 Degree C
Multiple Operation & Wireless Mode
•• Multiple Operation Modes: Bridge, Gateway, Ethernet Converter
•• Multiple Wireless Modes: AP, Client CPE(WISP), WDS PtP, WDS PtMP,
Repeater, Universal Repeater
PoE LAN/WAN
Optional RP-SMA Type
for External Ant.
Data Sheet
2
WNAP-6305
Applications
Longer distance coverage between LAN connections
The WNAP-6305 is a cost-effective wireless solution for widely open space applications. It is best suitable for wireless connections between buildings.
N
N
WNAP-6305
WNAP-6305
N
PoE
N
PoE
Campus
Government
PoE
N
N
WNAP-6305
WNAP-6305
PoE
PoE
Internet
Service Provider
100Base-TX UTP with PoE
PoE
Telephone wire
N
2.4GHz 802.11n
Enterprise
Community
With built-in RP-SMA type Antenna connector and high output power with multiple adjust Tx controller, the WNAP-6305 provides higher coverage and longer
distance wireless connection, and also allows CPE users to easily install and adjust the suitable value in appropriate locations. The WISP mode supported enables
CPE users to connect to Internet via local WISP provider.
N
AP Client
Mode
N
AP Mode
IP Camera
PoE
N
Wireless
IP Camera
*Sincerely suggest matching the same model in outdoor wireless bridge application for getting best performance.
Data Sheet
3
WNAP-6305
Specification
Product
2.4GHz 802.11n Wireless Access Point
Model
Hardware Specification
WNAP-6305
Standard support
Chipset
Memory
Interface
Antenna
Enclosure
PoE
Dimension (W x D x H)
Weight
Wireless Interface Specification
Frequency Band
Modulation
Data Rate
Opt. Channel
RF Output Power Max.
(Default Antenna)
Receiver Sensitivity
Media Access Control
Output Power Control
(Default Antenna)
Power Requirements
Wireless Management Features
Wireless Mode
Channel Width
Encryption Security
Wireless Isolation
Data Sheet
4
IEEE802.11b/g
IEEE 802.11n
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3x Flow Control
Ralink RT3050
16 Mbytes DDR SDRAM
4 Mbytes Flash
Wireless IEEE 802.11b/g/n
LAN: 1 x 10/100Base-TX, Auto-MDI/MDIX
WAN: 1 x 10/100Base-TX, Auto-MDI/MDIX
Internal (Default): directional antenna (Vertical-Polarization)
 Horizontal: 60 degree
 Vertical: 30 degree
External (Option): RP-SMA type Connector
 Switchable by Software
 For External Antenna Mode, attach antenna before power on
IP55 waterproof case
Passive PoE / 12V DC
Reset Button on PoE Injector
LAN RJ-45 Pin Assignment: PIN 4,5(+), PIN 7,8(-)
225 x 77 x 60 mm
255g
2.4~2.4835GHz
Transmission/Emission Type: DSSS / OFDM
Data modulation type: OFDM with BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, QPSK, CCK
802.11b: 11, 5.5, 2 and 1 Mbps with auto-rate fall back
802.11g: 54, 48, 36, 24, 18, 12, 9 and 6Mbps
802.11n (20MHz): up to 72Mbps
802.11n (40MHz): up to 150Mbps
America/ FCC: 2.414~2.462GHz (11 Channels)
Europe/ ETSI: 2.412~2.472GHz (13 Channels)
Japan/ TELEC: 2.412~2.484GHz (14 Channels)
802.11b: 20 ± 1dBm
802.11g: 19 ± 1dBm
802.11n: 16 ± 1dBm
802.11b: -93dBm
802.11g: -91dBm
802.11n: -89dBm
CSMA/CA
Range 1~100, default:100
100% = 20dBm
50% = 17dBm
25% = 14dBm
12.5% = 11dBm
1% = 8dBm
12V DC, 1A (switching)
 AP
 Client
 WDS PtP
 WDS PtMP
 WDS Repeater (AP+WDS)
 Universal Repeater (AP+Client)
20MHz / 40MHz
64/128-bits WEP
WPA, WPA-PSK
WPA2, WPA2-PSK
802.1X
Able to isolate each connected wireless clients for independent access.
WNAP-6305
Provides wireless LAN ACL (Access Control List) filtering
Wireless MAC address filtering
WPS (WIFI Protected Setup )
Enable/Disable SSID Broadcast
A protection mechanism prevents collisions among 802.11b/g modes
25
4
Wireless Security
B/G Protection Mode
Max. Wireless Client
Max. WDS AP
Software
LAN
WAN Protocol
VPN Passthrough
Operating Mode
Firewall
Max. Wired Client
NTP
Management
Diagnostic tool
Environment & Certification
Built-in DHCP server supporting static IP address distributing
Supports UPnP
Supports IGMP Proxy, DNS Proxy
Supports 802.1d STP - Spanning Tree Protocol
 Static IP
 DHCP (Dynamic IP)
 PPPoE
 PPTP
 L2TP
 PPTP
 L2TP
 IPSec
 Bridge
 Gateway
 Ethernet Converter (WISP)
NAT firewall with SPI (Stateful Packet Inspection)
Built-in NAT server supporting Port Forwarding (Virtual Server), and DMZ
Built-in firewall with Port / IP address / MAC / URL filtering
60
Network Time Management
Web UI, DHCP Client, Configuration Backup & Restore, Dynamic DNS
System Log
Temp.: -20~70 Degree C
Humidity: 10~95% non-condensing
Temp.: -30~80 Degree C
Humidity: 5~95% non-condensing
CE / FCC / RoHS
Operation
Storage
Regulatory
Ordering Information
802.11n Wireless Access Point - FCC
WNAP-6305-EG
802.11n Wireless Access Point - ETSI
802.11n Wireless Access Point - TELEC
Related Products
CB-STP-25
25 Meters STP Cat5 Cable
ELA-100
WNL-U555HA
ICA-HM316W
Ethernet Lightning Arrest Box
802.11n Wireless High Power USB Adapter
2 Mega-Pixel 11n IR IP Camera
Accessories
ANT-OM8
8dBi Omni Directional Antenna
ANT-OM15
ANT-FP9
ANT-FP18
ANT-SE18
ANT-YG13
ANT-YG20
ANT-GR21
WL-LTN
WL-SMA-0.6
WL-SMA-6
15dBi Omni Directional Antenna
9dBi Flat Panel Directional Antenna
18dBi Flat-Panel Directional Antenna
12-18dBi Adjustable Sector Antenna
13dBi Yagi Directional Antenna
20dBi Yagi Directional Antenna
21dBi Grid Directional Antenna
Lightning Arrester (N male to N female)
0.6M RP-SMA(M) to N(M) Cable
Data Sheet
5
07-11
6M RP-SMA(M) to N(M) Cable
PLANET Technology Corporation
11F, No. 96, Min Chuan Road, Hsin Tien, Taipei, Taiwan, R.O.C.
Tel: 886-2-2219-9518 Fax: 886-2-2219-9528
Email: sales@planet.com.tw www.planet.com.tw
C-WNAP-6305v2-KW
PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of
their respective owners. Copyright © 2011 PLANET Technology Corp. All rights reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising