Hearaeus KS12 UV light M_E

Hearaeus KS12 UV light M_E
Thermo Electron LED GmbH * Robert-Bosch-Straße 1 * D - 63505 Langenselbold
GB
Mobile UV spot
CAUTION - Observe operating instructions!
The installation of accessories and the retrofitting of device components must be performed only in accordance with the specifications
in the operating instructions.
Two versions of the mobile UV spot are available:
• Upright device A, comprising the lamp body [1], two removable stands [7], the lamp protector [2], and the connecting
cable with the connector for non-heating appliances [5] and
the UV connector [6].
• Suspended device B, comprising the lamp body [1], the
lamp protector [2], and the connecting cable for the UV
connector [10]. Operation of the supended device requires
an additional accessory, the support bar.
Mounting and start-up:
1. Two knurled screws secure the lamp protector [2] to the
lamp body [1]. Remove the knurled screws from the threaded holes and remove the lamp protector.
2. Installation and operation:
• Secure the two device stands [7] (left and right side)
of the upright device to the lamp body using the
knurled screws. Position the device in the center of
the sample chamber. Connect the connector for nonheating appliances [5] to the socket [4] at the lamp
body. Connect the UV connector [6] to one of the two
internal UV adapters.
• Attach the suspended device to the support bar [8]
using the two hooks [9]. Connect the UV connector
[10] to one of the two internal UV adapters.
NOTE – UV radiation
Prior to the installation and operation of the
mobile UV spot, all accessories and samples
must be removed from the sample chamber.
CAUTION - Danger of burns!
The UV lamp becomes extremely hot during
disinfection.
Prior to the removal of the mobile UV spot, allow the lamp body to cool down sufficiently!
3. Shut-off:
Disconnect the connecting cable.
Unscrew the stands from the upright device.
Secure the lamp protector to the lamp body using the
knurled screws.
03.2006 / 50077503
HERAsafe KS
HERAsafe KS
GB
Thermo Electron LED GmbH * Robert-Bosch-Straße 1 * D - 63505 Langenselbold
Mobiler UV-Spot
Spare parts
Part No.:
Description
Push-through lampholder
Power supply unit UV side 2 x 18 W 230 V
Power supply unit UV side 2 x 15 W 120 V
Power supply unit UVC lamp 230 V
Power supply unit UVC lamp 120 V
UVC disinfection lamp 15 W 435 mm long
UVC disinfection lamp 15 W 435 mm long, 1
Cable with socket
Positioning stand
Knurled screw
Operating instructions
SPOT 30
120 V
230 V
50043771
50043771
50048679
50060299
SPOT K
120 V
230 V
50043771
50043771
50048679
50060299
50048537
50060298
50048531
50048676
50049781
50077503
50048537
50060298
50048531
50048676
50049781
50077503
50048531
50048676
50049781
50077503
50048531
50048676
50049781
50077503
Technical data
Description
Width
Height
Height with positioning stand
Length
Weight
Rated voltage
Rated frequency
Wavelength
03.2006 / 50077503
Unit
mm
mm
mm
mm
kg
Volt
Hz
nm
SPOT 30
80
115
310
520
2
120
60
254
230
50
254
SPOT K
60
170
365
995
4,5
120
60
245
230
50
245
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising