Integra DPS-6.5 Operating Instructions Manual user guide

Integra DPS-6.5 Operating Instructions Manual user guide
Super Audio CD & DVD Audio/Video Player
DPS-6.5
Instruction Manual
Downloaded From Disc-Player.com Integra Manuals
Thank you for purchasing the Integra DPS-6.5 Super Audio CD & DVD Audio/Video player. Read
this manual carefully before using your new Player. A good understanding of its features and
operation will allow you to achieve optimum performance and enjoyment.
Keep this manual for future reference.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING
TO
QUALIFIED
SERVICE
PERSONNEL.
WARNING
AVIS
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Important Safety Instructions
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
2
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand, PORTABLE CART WARNING
tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to
avoid injury from tip-over.
S3125A
Unplug this apparatus during lightning storms or
when unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
Downloaded From Disc-Player.com Integra Manuals
normally, or has been dropped.
15. Damage Requiring Service
Unplug the apparatus from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
A. When the power-supply cord or plug is damaged,
B. If liquid has been spilled, or objects have fallen
into the apparatus,
C. If the apparatus has been exposed to rain or water,
D. If the apparatus does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the apparatus to its normal operation,
E. If the apparatus has been dropped or damaged in
any way, and
F. When the apparatus exhibits a distinct change in
performance this indicates a need for service.
16. Object and Liquid Entry
Never push objects of any kind into the apparatus
through openings as they may touch dangerous voltage points or short-out parts that could result in a
fire or electric shock.
The apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as
vases shall be placed on the apparatus.
Don’t put candles or other burning objects on top of
this unit.
17. Batteries
Always consider the environmental issues and follow local regulations when disposing of batteries.
18. If you install the apparatus in a built-in installation,
such as a bookcase or rack, ensure that there is adequate ventilation.
Leave 20 cm (8") of free space at the top and sides
and 10 cm (4") at the rear. The rear edge of the shelf
or board above the apparatus shall be set 10 cm (4")
away from the rear panel or wall, creating a flue-like
gap for warm air to escape.
Precautions
This unit contains a semiconductor laser system and is
classified as a “CLASS 1 LASER PRODUCT”. So, to
use this model properly, read this Instruction Manual
carefully. In case of any trouble, please contact the store
where you purchased the unit.
To prevent being exposed to the laser beam, do not try
to open the enclosure.
DANGER:
VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCK FAILED OR
DEFEATED. DO NOT STARE INTO BEAM.
CAUTION:
THIS PRODUCT UTILIZES A LASER. USE OF
CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
The label on the right is
applied on the rear panel
except for USA and Canadian
models.
1. This unit is a CLASS 1 LASER PRODUCT and employs a
laser inside the cabinet.
2. To prevent the laser from being exposed, do not remove the
cover. Refer servicing to qualified personnel.
Downloaded From Disc-Player.com Integra Manuals
For U.S. model
The laser is covered by a housing which prevents exposure during operation or maintenance. However, this
product is classified as a Laser Product by CDRH (Center for Devices and Radiological Health) which is a
department of the Food and Drug Administration.
According to their regulations 21 CFR section 1002.30,
all manufactures who sell Laser Products must maintain
records of written communications between the manufacturer, dealers and customers concerning radiation
safety. If you have any complaints about instructions or
explanations affecting the use of this product, please
feel free to write to the address on the back page of this
manual. When you write us, please include the model
number and serial number of your unit.
In compliance with Federal Regulations, the certification, identification and the period of manufacture are
indicated on the rear panel.
FCC INFORMATION FOR USER
CAUTION:
The user changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different from
• that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
3
Precautions—Continued
For Canadian model
5. Never Touch this Unit with Wet Hands
NOTE: This class B digital apparatus complies with
Never handle this unit or its power cord while your
hands are wet or damp. If water or any other liquid gets
inside this unit, have it checked by your Integra dealer.
Canadian ICES-003.
For models having a power cord with a polarized plug:
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
Modèle pour les Canadien
REMARQUE: Cet appareil numérique de la classe B
est conforme à la norme NMB-003 du Canada.
Sur les modèles dont la fiche est polarisee:
ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS
LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER
JUSQU’AU FOND.
1. Region Numbers
The DVD standard uses region numbers to control how
discs can be played around the world, the world being
divided into six regions. This unit will only play DVD
discs that match its region number, which can be found
on its rear panel (e.g., 1 ).
2. About this Manual
This manual explains how to use all of this unit’s functions. Although the DVD standard offers many special
features, not all discs use them all, so depending on the
disc being played, this unit may not respond to certain
functions. See the disc’s sleeve notes for supported features.
When you attempt to use a DVD feature that is
not available, this logo may appear onscreen,
indicating that the feature is not supported by
the current disc or this unit.
3. Recording Copyright
Unless it’s for personal use only, recording copyrighted
material is illegal without the permission of the copyright holder.
4. Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE
FIRST TIME, READ THE FOLLOWING SECTION
CAREFULLY.
AC outlet voltages vary from country to country. Make
sure that the voltage in your area meets the voltage
requirements printed on this unit’s rear panel (e.g., AC
120 V, 60 Hz).
4
Downloaded From Disc-Player.com Integra Manuals
6. Installing this Unit
• Install this unit in a well-ventilated location.
Ensure that there’s adequate ventilation all around
this unit, especially if it’s installed in an audio rack. If
the ventilation is inadequate, the unit may overheat,
leading to malfunction.
• Do not expose this unit to direct sunlight or heat
sources, because its internal temperature may rise,
shortening the life of the optical pickup.
• Avoid damp and dusty places, and places subject to
vibrations from loudspeakers. Never put the unit on
top of, or directly above a loudspeaker.
• Install this unit horizontally. Never use it on its side or
on a sloping surface, because it may cause a malfunction.
• If you install this unit near a TV, radio, or VCR, the
picture and sound quality may be affected. If this
occurs, move this unit away from the TV, radio, or
VCR.
7. Care
Occasionally, you should dust this unit all over with a
soft cloth. For stubborn stains, use a soft cloth dampened with a weak solution of mild detergent and water.
Dry the unit immediately afterwards with a clean cloth.
Do not use abrasive cloths, thinners, alcohol, or other
chemical solvents, because they may damage the finish
or remove the panel lettering.
8. Handling Notes
• If you need to transport this unit, use the original packaging to pack it how it was when you originally bought
it.
• Do not use volatile liquids, such as insect sprays, near
this unit. Do not leave rubber or plastic items on this
unit for a long time, because they may leave marks on
the case.
• This unit’s top and rear panels may get warm after prolonged use. This is normal.
• When you’ve finished using this unit, remove all discs
and turn off the power.
• If you do not use this unit for a long time, it may not
work properly the next time you turn it on, so be sure
to use it occasionally.
Precautions—Continued
9. To Obtain a Clear Picture
This unit is a high-tech, precision device. If the lens on
the optical pickup, or the disc drive mechanism
becomes dirty or worn, the picture quality may be
affected. To maintain the best picture quality, we recommend regular inspection and maintenance (cleaning or
worn part replacement) every 1,000 hours of use
depending on the operating environment. Contact your
Integra dealer for details.
10. Moisture Condensation
Moisture condensation may damage this unit.
Read the following carefully:
When you take a glass containing a cold drink outside
on a summer’s day, drops of water, called condensation,
form on the outside of the glass. Similarly, moisture
may condense on the lens of the optical pickup, one of
the most important parts inside this unit.
• Moisture condensation can occur in the following situations:
— The unit is moved from a cold place to a warm
place.
— A heater is turned on, or cold air from an air conditioner is hitting the unit.
— In the summer, when this unit is moved from an
air conditioned room to a hot and humid place.
— The unit is used in a humid place.
• Do not use this unit when there’s the possibility of
moisture condensation occurring. Doing so may damage your discs and certain parts inside this unit.
If condensation does occur, remove all discs and
leave this unit turned on for two to three hours. By
this time, the unit will have warmed up and any condensation will have evaporated. To reduce the risk of
condensation, keep this unit connected to a wall outlet.
Downloaded From Disc-Player.com Integra Manuals
5
Table of Contents
Basic Operation
Advanced Operation
Overview
Playback Techniques
Important Safety Instructions.............................. 2
Precautions ........................................................ 3
Introduction......................................................... 8
Supplied Accessories ..................................... 8
DPS-6.5 Features ........................................... 8
Disc Notes ...................................................... 9
Before Using the DPS-6.5 ................................ 11
Installing the Batteries .................................. 11
Using the Remote Controller ........................ 11
Front & Rear Panels ......................................... 12
Front Panel ................................................... 12
Display .......................................................... 13
Rear Panel.................................................... 14
Remote Controller ........................................ 15
Connections
Connecting the DPS-6.5................................... 17
Before Making Any Connections .................. 17
AV Cables & Connectors .............................. 17
Basic Setup .................................................. 18
Connecting Your TV ..................................... 18
Connecting to an AV Receiver ..................... 20
Connecting
-compatible Components .... 21
Controlling AV Components that are Out of
Range......................................................... 22
Connecting the Power/Turning on the DPS-6.5 ...23
Getting Started and Setting up
Getting Started ................................................. 24
Using the on-screen displays ....................... 24
Setting up the player for your TV .................. 24
Setting the language of this player’s
on-screen displays ..................................... 25
Basic Playback
Playing discs................................................. 25
Basic playback controls ................................ 26
Resume and Last Memory ........................... 26
DVD disc menus ........................................... 27
Video CD PBC menus .................................. 27
6
Downloaded From Disc-Player.com Integra Manuals
Playing discs ..................................................... 28
Scanning discs .............................................. 28
Playing in slow motion................................... 28
Frame advance/frame reverse ...................... 29
Viewing a JPEG slideshow ........................... 29
Browsing video content with the Disc
Navigator .................................................... 30
Browsing WMA, MP3 and JPEG files with
the Disc Navigator ...................................... 31
Looping a section of a disc............................ 32
Using repeat play .......................................... 32
Using random play ........................................ 33
Creating a program list.................................. 34
Other functions available from the program
menu........................................................... 35
Searching a disc............................................ 35
Switching subtitles......................................... 36
Switching audio language/channel................ 36
Zooming the screen ...................................... 37
Switching camera angles .............................. 37
Displaying disc information ........................... 37
DivX® video playback on the DPS-6.5
(not North American model) .......................... 38
About DivX .................................................... 38
Playing DivX video ........................................ 38
About DivX® VOD content ............................ 40
Playing DivX® VOD content .......................... 40
Detailed Settings
Audio Settings and Video Adjust menus........... 41
Audio Settings menu ..................................... 41
Audio DRC .................................................... 41
Video Adjust menu ........................................ 41
Initial Settings menu.......................................... 42
Using the Initial Settings menu...................... 42
Digital Audio Out settings.............................. 43
Video Output settings.................................... 43
Language settings......................................... 44
Display settings ............................................. 44
Options settings ............................................ 45
Speakers settings.......................................... 45
About the audio output settings..................... 46
Parental Lock ................................................ 47
Registering a new password ......................... 47
Changing your password .............................. 47
Setting/changing the Parental Lock .............. 47
Setting/changing the Country code ............... 48
Country code list ........................................... 48
DTS Downmix ............................................... 49
Audio Output Mode ....................................... 49
Speaker Installation....................................... 49
Speaker Distance.......................................... 50
Table of Contents—Continued
Miscellaneous information
Additional information ....................................... 51
Screen sizes and disc formats ...................... 51
Setting the TV system
(Not North American model) ....................... 51
Resetting the player ...................................... 52
Titles, chapters and tracks ............................ 52
DVD-Video regions ....................................... 52
Selecting languages using the language
code list ...................................................... 52
Language code list ........................................ 53
Using the Remote controller with Other
Brand’s TVs................................................... 54
DivX Titles......................................................... 56
Glossary............................................................ 58
FAQ................................................................... 59
Troubleshooting ................................................ 60
DPS-6.5......................................................... 60
Remote Controller ......................................... 62
Specifications.................................................... 63
Downloaded From Disc-Player.com Integra Manuals
7
Introduction
Supplied Accessories
Make sure you have the following accessories:
RC-583DV
Remote controller & 2 batteries (AA)
DPS-6.5 Features
Highlights
• Dolby*1 Digital and DTS*2
• DVD-Video / Video CD / Audio CD playback
• CD-R, CD-RW (Video CD, audio CD, MP3/WMA*3/
JPEG)
• DVD-Audio and SACD compatible
• Super VCD compatible
• DVD-R (DVD-Video)
• DVD-RW (DVD-Video, VR format)
• 5.1-channel analog audio output
• IR in/out
• RS 232 port
Video
AV cable (RCA) (5 ft./1.5 m)
S Video cable (5 ft./1.5 m)
cable (6 ft./1.8 m)
This cable is used to connect the DPS-6.5 to other
(Remote Intercompatible Integra components for
active) control.
To use
, in addition to an
connection, you must
make an analog audio connection (RCA) between the
DPS-6.5 and your Integra AV receiver.
•
•
•
•
•
•
•
•
•
•
•
•
Advanced 108 MHz/12-bit video D/A converter
Component video output
S Video and composite video outputs
Frame-by-frame playback
Slow motion playback
Fast forward and reverse
Repeat playback
Random playback
Supports 4:3 and 16:9 aspect ratio TVs
Multiple camera angle support
Parental Lock function
Screen Saver function
Audio
• 192 kHz/24-bit D/A converter
• Optical / Coaxial digital output
Others
• Dynamic Range Control setting
• Adjustable display brightness
• Full-function remote controller
Power cord (6 ft./1.8 m)
Shape may vary depending on the area which it was purchased.
The letter displayed at the end of the product name found in
catalogs and on package represents the color of the DPS-6.5.
Though the color varies, the specifications and operations are
the same.
*1. Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
*2. “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
*3. Windows Media, and the Windows logo are trademarks, or registered trademarks of Microsoft
Corporation in the United States
and/or other countries.
8
Downloaded From Disc-Player.com Integra Manuals
Introduction—Continued
• Don’t use discs with an unusual shape, such as those
shown below, because you may damage the DPS-6.5.
Disc Notes
Supported Discs
The DPS-6.5 supports the following discs.
Disc
DVD-Video
Logo
Format or file type
See page 52 for
region information.
DVD-Audio
DVD-Audio
SACD
Super Audio CD (single layer, dual layer,
hybrid)
DVD-Video
DVD-R
DVD-RW
DVD-Video,
VR format
Including PBC
Video CD
PCM and DTS
Audio CD
CD-R
Video CD, audio CD,
MP3, WMA, JPEG
CD-RW
Video CD, audio CD,
MP3, WMA, JPEG
JPEG CD
JPEG
• Some audio CDs feature copy protection that doesn’t
conform to the official CD standard. Since these are
nonstandard discs, they may not play properly in the
DPS-6.5.
• The DPS-6.5 supports CD-R and CD-RW discs
recorded in Video CD format, audio CD format, or
ISO 9660 Level 1 or 2 format with MP3, WMA, and
JPEG files. It also supports DVD-R and DVD-RW
discs recorded in DVD-Video format. However, some
CD-R, CD-RW, DVD-R, and DVD-RW discs may not
work properly for any of the following reasons:
incomplete disc finalization, disc burner characteristics, disc characteristics, the disc is damaged or dirty.
See the manual supplied with your disc burner for
more information. Condensation or dirt on the optical
pickup lens can also affect playback.
• The DPS-6.5 supports 8 cm and 12 cm discs.
• The DPS-6.5 does not support disc types not listed.
Downloaded From Disc-Player.com Integra Manuals
• Don’t use discs that have residue from adhesive tape,
rental discs with peeling labels, or discs with custommade labels or stickers. Doing so may damage the
DPS-6.5 and you may not be able to remove the disc
properly.
Discs Made on Personal Computers
Discs made on personal computers, including those of a
compatible format, may not work properly in the DPS6.5 because of incorrect settings in the disc burning software. Check the manuals supplied with your disc burning software for additional compatibility information.
CD-R/RW compatibility
• Compatible formats: CD-Audio, Video CD, ISO 9660
CD-ROM* containing MP3, WMA or JPEG files
* ISO 9660 Level 1 or 2 compliant. CD physical format:
Mode1, Mode2 XA Form1. Romeo and Joliet file systems
are both compatible with this player.
• Multi-session playback: No
• Unfinalized disc playback: No
DVD-R/RW compatibility
• Compatible formats: DVD-Video, Video Recording
(VR)*
* Edit points may not play exactly as edited; screen may go
momentarily blank at edited points.
• Unfinalized playback: No
• WMA/MP3/JPEG file playback on DVD-R/RW: No
Compressed audio compatibility
• Compatible formats: MPEG-1 Audio Layer 3 (MP3),
Windows Media Audio (WMA)
• Sampling rates: 32, 44.1 or 48kHz
• Bit-rates: Any (128Kbps or higher recommended)
• VBR (variable bit rate) MP3 playback: No
• VBR WMA playback: No
• WMA lossless encoding compatible: No
• DRM (Digital Rights Management) compatible: Yes
(DRM-protected audio files will not play in this
player—see also DRM in the “Glossary” on page 58)
• File extensions: .mp3, .wma (these must be used for
the player to recognize MP3 and WMA files – do not
use for other file types)
• File structure: Up to 299 folders; up to 648 folders and
files combined
9
Introduction—Continued
About WMA
Handling Discs
WMA is an acronym for Windows Media Audio and
refers to an audio compression technology developed by
Microsoft Corporation. WMA content can be encoded
by using Windows Media® Player version 7, 7.1, Windows Media® Player for Windows® XP, or Windows
Media® Player 9 Series.
• Never touch the underside of a disc. Always hold discs
by the edge, as shown.
JPEG file compatibility
• Compatible formats: Baseline JPEG and EXIF 2.2*
still image files up to a resolution of 3072 x 2048.
* File format used by digital still cameras
Underside
• Never attach adhesive tape or sticky labels to discs.
• Progressive JPEG compatible: No
• File extensions: .jpg (must be used for the player to
recognize JPEG files – do not use for other file types)
• File structure: Up to 299 folders; up to 648 folders and
files combined
PC-created disc compatibility
Cleaning Discs
Discs recorded using a personal computer may not be
playable in this unit due to the setting of the application
software used to create the disc. In these particular
instances, check with the software publisher for more
detailed information.
Discs recorded in packet write mode (UDF format) are
not compatible with this player.
Check the DVD-R/RW or CD-R/RW software disc
boxes for additional compatibility information.
• For best results, keep your discs clean. Fingerprints
and dust can affect the sound and picture quality and
should be removed as follows. Using a clean soft
cloth, wipe from the center outwards, as shown. Never
wipe in a circular direction.
✔
Copyright
It is forbidden by law to copy, broadcast, show, broadcast
on cable, play in public, or rent copyrighted material
without permission.
DVD-Video discs are copy-protected, and any recordings made from these discs will be distorted.
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use
of this copyright-protection technology must be authorized by Macrovision Corporation, and is intended for
home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
10
Downloaded From Disc-Player.com Integra Manuals
• To remove stubborn dust or dirt, wipe the disc with a
damp soft cloth, and then dry it with a dry cloth.
• Never use solvent-based cleaning fluids, such as thinner or benzine, commercially available cleaners, or
antistatic sprays intended for vinyl records, because
they may damage the disc.
Storing Discs
• Don’t store discs in places subject to direct sunlight, or
near heat sources.
• Don’t store discs in places subject to moisture or dust,
such as in a bathroom or near a humidifier.
• Always store discs in their cases and vertically. Stacking, or putting objects on unprotected discs may cause
warping, scratches, or other damage.
Before Using the DPS-6.5
Installing the Batteries
1
Open the battery compartment, as shown.
Using the Remote Controller
To use the remote controller, point it at the DPS-6.5’s
remote control sensor, as shown below.
Remote control sensor
DPS-6.5
Standby/O
n
Progressive
Standby
Display
Play Mode
Dimmer
Clear
Open
/Close
Pause
Stop
Play
DPS-6.5
2
Insert the two supplied batteries (AA) in
accordance with the polarity diagram
inside the battery compartment.
)
30˚
5
30˚
.
ox
pr
16
(
ft.
m
Ap
3
Close the battery compartment.
Notes:
• The supplied batteries should last for about six
months, although this will vary with usage.
• If the remote controller doesn’t work reliably, try
replacing both batteries.
• Don’t mix new and old batteries, or different types of
batteries.
• If you intend not to use the remote controller for a long
time, remove the batteries to prevent possible leakage
and corrosion.
• Flat batteries should be removed as soon as possible to
prevent possible leakage and corrosion.
Downloaded From Disc-Player.com Integra Manuals
Notes:
• The remote controller may not work reliably if the
DPS-6.5 is subjected to bright light, such as direct
sunlight or inverter-type fluorescent lights. Keep this
in mind when installing the DPS-6.5.
• If another remote controller of the same type is used in
the same room, or the DPS-6.5 is installed close to
equipment that uses infrared rays, the remote controller may not work reliably.
• Don’t put anything, such as a book, on the remote controller, because the buttons may be pressed inadvertently, thereby draining the batteries.
• The remote controller may not work reliably if the
DPS-6.5 is installed in a rack behind colored glass
doors. Keep this in mind when installing the DPS-6.5.
• The remote controller will not work if there’s an obstacle between it and the DPS-6.5’s remote control sensor.
11
Front & Rear Panels
For detailed information, refer to the pages in brackets.
Front Panel
1 2
3 4 5
6
7 8 9
J
K
L
M
Stop
Play
Standby/On
Open /Close
Progressive
Display
Play Mode
Dimmer
Clear
Pause
Standby
DPS-6.5
S R
Q
A Standby/On button [23, 25]
This button is used to set the DPS-6.5 to On or
Standby.
B Standby indicator [23]
This indicator lights up when the DPS-6.5 is in
Standby.
C Display button [37]
This button is used to display information about the
current disc, title, chapter, or track, including the
elapsed time, remaining time, total time, and so on.
Press it repeatedly to display more information.
D Play Mode button [32–35]
This button is used to open and close the Play Mode
menu.
E Progressive indicator [19, 43]
This indicator lights up when the DPS-6.5 is set to
output progressive scan video.
F Disc tray [25]
Discs are loaded here.
G Top Menu button [27]
This button is used to display the top menu of a
DVD-Video disc.
H Cursor
/ / / & Enter buttons [24]
The four cursor buttons located around the central
[Enter] button are used to navigate DVD-Video
menus and the onscreen setup menus.
The central [Enter] button is used to start playback
of the selected title, chapter, or track and to confirm
settings.
I Menu button [27]
This button is used to display a menu on a
DVD-Video disc or to open the Disc Navigator
when using a Video CD, audio CD, WMA/MP3/
JPEG disc, or VR format DVD-RW disc.
12
Downloaded From Disc-Player.com Integra Manuals
P
O
N
J Open/Close button [25]
This button is used to open and close the disc tray.
K Pause button [26]
This button is used to pause playback.
L Stop button [26]
This button is used to stop playback.
M Play button [25, 26]
This button is used to start playback.
N Previous/Next
/
buttons [26]
The Previous button is used to select the previous
chapter or track. During playback it selects the
beginning of the current chapter or track.
The Next button is used to select the next chapter or
track.
O Setup button [24]
This button is used to open and close the onscreen
setup menus.
P Return button [24, 27]
This button is used to return to the main menu without saving your changes.
Q Remote control sensor [11]
This sensor receives control signals from the remote
controller.
R Clear button [34]
This button is used to cancel various functions.
S Dimmer button
This button is used to adjust the display brightness.
normal
dim
dimmer
Front & Rear Panels—Continued
Display
12
D E F
1
3
4
G
D indicator
This indicator appears when playing Dolby Digital
material.
2 Disc type indicators
These indicators show the type of disc loaded.
3 TITLE indicator
While stopped, the total number of titles on the current DVD-Video disc is displayed here. During
playback, the number of the current title is displayed.
4 GROUP indicator
While stopped, the total number of groups on the
current DVD-Audio disc is displayed here. During
playback, the number of the current group is displayed.
5 TRACK indicator
This indicator appears while track numbers are
being displayed. While stopped, the total number of
tracks on the current SACD, Video CD, audio CD,
or MP3/WMA disc are displayed. During playback,
the number of the current track is displayed.
6 5.1 CH indicator
This indicator lights up when 5.1-channel analog
audio output is selected.
7 CHP indicator
This indicator appears while the number of the current chapter is being displayed.
8 D.MIX indicator
During multichannel audio playback, indicates that
the output signal has been “downmixed” from the
original audio source. This is an automatic function
performed by the player in order to present the most
appropriate audio mix to the speakers present in
your system.
Downloaded From Disc-Player.com Integra Manuals
56 7 8
9
0 A B C
I
H
9 RANDOM indicator
This indicator appears when using the Random
function.
0 REMAIN indicator
This indicator appears while the remaining time is
being displayed.
A Repeat
indicator
This indicator appears when A–B playback or
repeat playback is used.
B A–B indicator
These indicators appear when using the A-B Repeat
function.
C Camera angle
indicator
This indicator appears if the DVD-Video disc being
played features multiple camera angles.
D DTS indicator
This indicator appears when playing DTS material.
E Play
indicator
This indicator is shown during playback.
F Pause
indicator
This indicator appears when playback is paused.
G Progressive indicator
This indicator appears when the Progressive Scanning function is on.
H Message & time area
Time information, such as total time, remaining
time, and so on, is displayed here in hours, minutes,
and seconds. Other messages are also displayed.
I GUI (Graphical User Interface) indicator
This indicator appears when the onscreen setup
menu is open.
13
Front & Rear Panels—Continued
Rear Panel
1
23
4
5
AUDIO OUTPUT
FRONT/D. MIX
1
2
CENTER
COAXIAL
VIDEO
L
SUPER AUDIO CD & DVD AUDIO/
VIDEO PLAYER
COMPONENT 2
Y
PB
J
REMOTE
CONTROL
IN
AC INLET
COMPONENT 1
PR
Y
PB
K
IR
VIDEO OUTPUT
DIGITAL
SURR
6 78 9
PR
RS232
MODEL NO. DPS-6.5
RATING:
AC 120 V
R
SUB
WOOFER
60Hz
11 W
OPTICAL
A AUDIO OUTPUT [20–21]
These jacks output analog audio. The FRONT/
D.MIX jacks can be connected to the stereo input on
a TV, hi-fi amp, or other component. The 1 and 2
jacks output the same signals so you can use either.
DVDs with 5.1-channel audio are downmixed into
two channels before being output by the FRONT/
D.MIX jacks.
If you’re using an AV receiver or surround decoder
with a 5.1-channel analog audio input, use the
FRONT/D.MIX 1 or 2 jacks and the SURR L/R,
CENTER, and SUBWOOFER jacks. In this case,
you must set the Audio Output Mode on the Initial
Setup menu to 5.1 Channel. With this setting, the
FRONT/D.MIX jacks will output the front signals,
and the SURR L/R, CENTER, and SUBWOOFER
jacks will output the surround, center, and subwoofer signals respectively.
B COAXIAL DIGITAL AUDIO OUTPUT [20]
This coaxial digital audio output can be connected
to a coaxial digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
C OPTICAL DIGITAL AUDIO OUTPUT [20]
This optical digital audio output can be connected to
an optical digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
D COMPONENT 2 VIDEO OUTPUT [19]
These BNC connectors can be used to connect a TV
or projector with BNC component video inputs.
E COMPONENT 1 VIDEO OUTPUT [19]
These RCA connectors can be used to connect a TV,
projector or AV receiver with component video
inputs.
14
Downloaded From Disc-Player.com Integra Manuals
S VIDEO
OUT
F VIDEO OUTPUT [18]
These RCA connectors can be used to connect TVs,
projectors or AV receivers with composite video
inputs.
G S VIDEO OUTPUT [18]
These connectors can be used to connect TVs or
projectors with S Video inputs.
H
jacks [21]
These
(Remote Interactive) connectors can be
connected to the
connectors on your other Integra AV components for interactive control.
For remote control operation, you must make an
analog RCA connection between your DPS-6.5 and
the other AV component, even if they are connected
digitally.
I IR IN/OUT [22]
The IR IN connector can be used to connect a commercially available IR receiver, which can be used
to pickup signals from the remote controller when
the DPS-6.5 is located in another room, installed in
a rack, or is out of range of the remote controller
The IR OUT connector can be used to connect a
commercially available IR emitter, which can be
used to pass remote controller signals received by
the IR IN along to other AV components.
J RS 232
This RS-232 port can be connected to an external
controller.
K AC INLET [23]
The supplied power cord is connected here. The
other of the power cord should be connected to a
suitable wall outlet.
Front & Rear Panels—Continued
Remote Controller
A Standby button [23]
This button is used to set the DPS-6.5 to Standby.
B On button [23]
1
2
On
Standby
Open/
Close
L
Play Mode
1
2
3
Display
3
4
5
6
Dimmer
7
4
9
0
Clear
Top Menu
Menu
5
6
7
8
9
J
K
8
M
N
O
P
Q
R
Enter
Return
Setup
Audio
Angle Subtitle Zoom
Stop
Play
Down
Pause
Up
S
T
U
V
W
X
T V Control
T V/ Video Channel
On/
Standby
Volume
Y
This button is used to turn on the DPS-6.5.
Don’t turn on the DPS-6.5 until you’ve completed,
and double checked all connections (pages 17–21).
C Number buttons [26–27, 35, 47]
These buttons are used to enter title, chapter, and
track numbers and to enter times for locating specific points in time.
D Top Menu button [27]
This button is used to display the top menu on a
DVD-Video disc.
E Cursor
/ / / buttons [24]
These buttons are used to navigate onscreen menus.
F Return button [24, 27]
This button is used to return to the main menu without saving your changes.
G Audio button [36]
This button is used to select foreign language
soundtracks and audio formats (e.g., Dolby Digital
or DTS) on DVD-Video discs.
For Video CDs you can select left-channel, rightchannel, or stereo.
H Angle button [37]
This button is used to select camera angles on
DVD-Video discs.
I Stop
button [26]
This button is used to stop playback.
RC - 583DV
J Fast Reverse
/(
) button [26, 28,
29]
This button is used for fast reverse, reverse slow
motion, and reverse frame-by-frame playback.
K Fast Forward
/(
) button [26, 28,
29]
This button is used for fast forward, slow motion,
and frame-by-frame playback.
L Open/Close
button [25]
This button is used to open and close the disc tray.
M Play Mode button [32–35]
This button is used to open and close the Play Mode
menu.
N Display button [37]
This button is used to display information about the
current disc, title, chapter, or track, including the
elapsed time, remaining time, total time, and so on.
Press it repeatedly to display more information.
Downloaded From Disc-Player.com Integra Manuals
15
Front & Rear Panels—Continued
O Dimmer button
This button is used to adjust the display brightness.
normal
dim
dimmer
P Clear [34]
This button is used to cancel various functions.
Q Menu button [27]
This button is used to display the menu on a
DVD-Video disc or to open the Disc Navigator
when using a Video CD, audio CD, WMA/MP3/
JPEG disc, or VR format DVD-RW disc.
R Enter button [24]
This button is used to start playback of the selected
title, chapter, or track, and to confirm settings.
S Setup button [24]
This button is used to open and close the onscreen
setup menus.
T Zoom button [37]
This button is used with the Zoom function.
U Subtitle button [36]
This button is used to select subtitles on
DVD-Video discs.
V Pause
button [26, 28, 29]
This button is used to pause playback.
W Previous/Next
/
buttons [26]
The Previous button is used to select the previous
chapter or track. During playback it selects the
beginning of the current chapter or track.
The Next button is used to select the next chapter or
track.
X Play
button [26]
This button is used to start playback.
Y TV Control buttons [54]
TV/Video button
Used to select TV or VCR on your TV.
Channel –/+ buttons
Used to select channels on your TV.
On/Standby button
Used to set your TV to On or Standby.
Volume / buttons
Used to adjust your TV’s volume.
16
Downloaded From Disc-Player.com Integra Manuals
Connecting the DPS-6.5
white plugs to connect left-channel audio inputs and outputs (typically labeled “L”). And use yellow plugs to
connect composite video inputs and outputs.
The supplied AV cable is made up of an analog audio
cable and a composite video cable.
Before Making Any Connections
• Read the manuals supplied with your AV components.
• Don’t connect the power cord until you’ve completed
all audio and video connections.
Analog audio
Optical Digital Outputs
The DPS-6.5’s optical digital connectors have a shuttertype cover that opens when an optical plug is inserted,
and closes when it’s removed. Push the plug in all the
way.
Caution: To prevent shutter damage, hold the optical
plug straight when inserting and removing.
Right (red)
Right (red)
Left (white)
Left (white)
(Yellow)
(Yellow)
Composite video
• Push each plug in all the way to
make a good connection (loose
connections can cause noise or
malfunctions).
• To prevent interference, keep
audio and video cables away from
power cords and speaker cables.
RCA AV Connection Color Coding
RCA AV connections are usually color coded: red,
white, and yellow. Use red plugs to connect right-channel audio inputs and outputs (typically labeled “R”). Use
Right!
Wrong!
AV Cables & Connectors
Video
Y
Y
COMPONENT 1
Y
Component
video
P B / CB
P B / CB
P R / CR
P R / CR
Y
Y
PB / C B
PB / C B
PR / C R
PR / C R
PB
PR
COMPONENT 2
Y
PB
Component video separates the luminance (Y) and
color difference signals (PR, PB), providing the best
picture quality. Some TV manufacturers label their
component video inputs differently.
The DPS-6.5 has RCA and BNC component video
outputs.
PR
S Video provides better picture quality than composite video.
S Video
S VIDEO
Composite
video
Composite video can be found on virtually all TVs,
VCRs, and video equipment.
VIDEO
Audio
Optical digital audio connections provide better
audio quality than analog connections.
Optical digital
OPTICAL
Coaxial digital audio connections provide better
audio quality than analog connections.
COAXIAL
Coaxial digital
RCA analog audio connectors can be found on virtually all AV components.
1
L
Analog
R
Multichannel
analog audio
cable (RCA)
FRONT/D. MIX
1
2
SURR
CENTER
SUB
WOOFER
Downloaded From Disc-Player.com Integra Manuals
This cable carries multichannel analog audio and
it’s typically used to connect DPS-6.5s with individual 5.1 channel analog audio outputs. Several
standard analog audio cables can be used instead of
a multichannel cable.
17
Connecting the DPS-6.5—Continued
Basic Setup
The setup described here is a basic setup that allows you to play discs using just the cables supplied with the player. In
this setup, stereo audio is played through the speakers in your TV.
L
AV cable
(Supplied)
R
ANALOG
INPUT
TV
VIDEO IN
AUDIO OUTPUT
FRONT/D. MIX
1
2
CENTER
IR
VIDEO OUTPUT
DIGITAL
SURR
COAXIAL
VIDEO
L
SUPER AUDIO CD & DVD AUDIO/
VIDEO PLAYER
COMPONENT 2
Y
PB
REMOTE
CONTROL
IN
AC INLET
COMPONENT 1
PR
Y
PB
PR
RS232
MODEL NO. DPS-6.5
RATING:
AC 120 V
R
SUB
WOOFER
60Hz
11 W
OPTICAL
S VIDEO
OUT
To power outlet
Power cord
(Supplied)
• This player is equipped with copy protection technology. Do not connect this player to your TV via a VCR
using AV cables, as the picture from this player will
not appear properly on your TV. (This player may also
not be compatible with some combination TV/VCRs
for the same reason; refer to the manufacturer for more
information.)
1. Connect the VIDEO OUTPUT and AUDIO OUTPUT ANALOG L/R jacks to a set of A/V inputs
on your TV.
Use the supplied AV cable (RCA), connecting the
red and white plugs to the audio outputs and the yellow plug to the video output. Make sure you match
up the left and right audio outputs with their corresponding inputs for correct stereo sound.
See the following page if you want to use a component or S Video cable for the video connection.
If you need another pair of stereo outputs (and don’t
need to use the multichannel analog outputs), you
can use the FRONT/D.MIX 1 or 2 AUDIO OUTPUT
jacks (page 20).
2. Connect the supplied AC power cord to the AC
INLET, then plug into a power outlet.
18
Downloaded From Disc-Player.com Integra Manuals
Notes:
• Before unplugging the player from the power outlet,
make sure you first switch it into standby using either
the front panel Standby/On button, or the remote controller, and wait of the “GOOD BYE” message to disappear from the player’s display.
• For the above reasons, do not plug this player into a
switched power supply found on some amplifiers and
AV receivers.
Connecting Your TV
• Connect the DPS-6.5 to the TV directly. If you connect the DPS-6.5 to a VCR, TV/VCR combination, or
video selector, the playback picture may be distorted
as DVD videos are copy protected.
Using S Video
If your TV (or other equipment) has an S Video input,
you can use this instead of the standard (composite) output for a better quality picture.
• Use an S Video cable (supplied) to connect the S
VIDEO OUTPUT to an S Video input on your TV (or
monitor or AV receiver).
Connecting the DPS-6.5—Continued
• The DPS-6.5 has two S Video output connectors. They
output the same video signal.
• Line up the small triangle above the jack with the same
mark on the plug before plugging in
IR
VIDEO OUTPUT
REMOTE
CONTROL
VIDEO
COMPONENT 2
Y
PB
IN
AC INLET
COMPONENT 1
PR
Y
PB
PR
RS232
OUT
S VIDEO
S VIDEO
TV
S VIDEO IN
Note:
• Watching progressive scan video from the component
video outputs
This player can output progressive scan video from the
component video output. Compared to interlace video,
progressive scan video effectively doubles the scanning rate of the picture, resulting in a very stable,
flicker-free image. To set up the player for use with a
progressive scan TV, see Video Output settings on
page 43. When the player is set to output progressive
scan video, the Progressive indicator lights in the front
panel display.
Important:
• If you connect a TV that is not compatible with a progressive scan signal and switch the player to progressive, you will not be able to see any picture at all. In
this case, switch everything off and reconnect using
the supplied video cable, then switch back to Interlace
(see page 19).
Using Component Video
You can use the component video output instead of the
standard video out jack to connect this player to your TV
(or other equipment).
This should give you the best quality picture from the
three types of video output available.
• Use a component video cable (not supplied) to connect the COMPONENT VIDEO OUTPUT jacks to a
component video input on your TV, monitor or AV
receiver.
• If your TV or projector has BNC component video
inputs, use a BNC component video cable to connect
them to the DPS-6.5’s BNC component video outputs.
• The DPS-6.5 has two component video outputs. The
COMPONENT 1 output uses RCA connectors. The
COMPONENT 2 output uses BNC connectors. They
output the same video signal.
PB
PR
IR
VIDEO OUTPUT
VIDEO
COMPONENT 2
Y
ER AUDIO CD & DVD AUDIO/
VIDEO PLAYER
PB
REMOTE
CONTROL
IN
Y
PB
60Hz
PR
RS232
11 W
S VIDEO
COMPONENT
VIDEO IN
Y
PB
Standby/On
Standby/On
Open /Close
Display
Standby
Dimmer
AC INLE
COMPONENT 1
PR
ODEL NO. DPS-6.5
ATING:
C 120 V
Switch the player to standby then, using the front panel
controls, press Standby/On while pressing
to switch
the player back to Interlace.
Compatibility of this player with
progressive-scan and high-definition TVs
COMPONENT 1
Y
Switching the video output to interlace
using the front panel controls
OUT
TV
This player is compatible with progressive video Macro
Vision System Copy Guard.
Consumers should note that not all high-definition television sets are fully compatible with this product and
may cause artifacts to be displayed in the picture. In case
of 525 progressive scan picture problems, it is recommended that the user switch the connection to the “standard definition” output (Interlace). If there are questions
regarding our TV set compatibility with this model,
please contact our customer service center.
PR
Downloaded From Disc-Player.com Integra Manuals
19
Connecting the DPS-6.5—Continued
Connecting to an AV Receiver
You can connect this player to your AV receiver using the
multichannel analog outputs or one of the digital outputs. In addition to these connections, you should also
connect the 2 channel analog outputs for compatibility
with all discs. You’ll probably also want to connect a
video output to your AV receiver. You can use any of the
video outputs available on this player.
Before connecting
• When you connect the DPS-6.5 to the amplifier, be
sure to turn off the power and unplug both units from
the mains before making any connections. Otherwise,
the speakers may be damaged.
• Connect the plugs securely.
To enjoy surround sound you need to connect this player
to an AV receiver using a digital output. This player has
both coaxial and optical digital jacks; use whichever is
convenient.
To record the audio from a CD-R disc etc. to a cassette
or CDR recorder that’s connected to the AV receiver, and
when your AV receiver has Zone2, you must connect the
DPS-6.5’s analog audio outputs to the AV receiver.
You’ll probably also want to connect a video output to
your AV receiver. You can use any of the video outputs
available on this player (the illustration shows a standard
(composite) connection).
This enables you to listen to surround sound.
For an optical connection, use an optical cable (not supplied) to connect the “OPTICAL DIGITAL AUDIO
OUTPUT” jack to an optical input on your AV receiver.
For a coaxial connection, use a coaxial cable (similar to
the supplied video cable) to connect the “COAXIAL
DIGITAL AUDIO OUTPUT” jack to a coaxial input on
your AV receiver.
Connecting the Analog Output
1. Connect the FRONT/D.MIX 1 or 2 AUDIO OUTPUT and VIDEO OUTPUT jacks on this player
to a set of analog audio and video inputs on your
AV receiver.
AV receiver
DVD
IN
VIDEO
FRONT/D. MIX
1
2
FRONT
L
R
Connecting the Digital Output
This player has both optical and coaxial-type digital
audio outputs for connection to an AV receiver. Connect
whichever is convenient.
In addition to a digital connection, we recommend also
connecting using the stereo analog connection.
Depending on the capabilities of your AV receiver, you
might have to set up this player to output only digital
audio in a compatible format. See Digital Audio Out settings on page 43 and refer to the operating instructions
that came with your AV receiver.
1. Connect one of DIGITAL AUDIO OUTPUT jacks
on this player to a digital input on your AV receiver.
DIGITAL
AUDIO OUTPUT
FRONT/D. MIX
1
2
CENTER
VIDEO OUTPUT
COAXIAL
DIGITAL
SURR
COAXIAL
VIDEO
L
SUPER AUDIO CD & DVD AUDIO/
VIDEO PLAYER
COMPONENT 2
Y
PB
COMPONENT 1
PR
Y
PB
PR
MODEL NO. DPS-6.5
RATING:
AC 120 V
R
SUB
WOOFER
60Hz
11 W
OPTICAL
S VIDEO
OPTICAL
COAXIAL
OPTICAL
Connect one
or the other
AV receiver
20
Downloaded From Disc-Player.com Integra Manuals
AUDIO OUTPUT
FRONT/D. MIX
1
2
DIGITAL
SURR
CENTER
VIDEO
COAXIAL
L
Y
R
SUB
WOOFER
OPTICAL
S VIDEO
The diagram shows standard video connections, but you
can alternatively use the S Video or component video
connections if they’re available.
2. Connect the AV receiver’s video output to a video
input on your TV.
You can use the S Video or component video jacks to
connect to the AV receiver if you prefer.
Tip:
• You usually have to connect the same kind of video
cable between your DPS-6.5 and AV receiver, and
between your AV receiver and TV.
Connecting the DPS-6.5—Continued
Connecting the Multichannel Analog
Outputs
Connecting
Components
If your AV receiver has 5.1 channel analog inputs, we
recommend connecting this player to it using the multichannel analog outputs. Doing this will ensure that you
can enjoy all kinds of disc, including Dolby Digital and
DTS DVD-Video discs, as well as high sampling rate
and multichannel DVD-Audio and SACD discs.
1. Connect the FRONT/D.MIX, SURR, CENTER,
SUBWOOFER outputs on this player to the
multi-channel audio inputs on your AV receiver.
It’s convenient to use three stereo audio cables; one
for the FRONT/D.MIX 1 or 2, one for the SURR and
one for the CENTER and SUBWOOFER channels.
-compatible
AUDIO OUTPUT
FRONT/D. MIX
1
2
CENTER
IR
VIDEO OUTPUT
DIGITAL
SURR
COAXIAL
VIDEO
L
REMOTE
CONTROL
IN
COMPONENT 1
PR
Y
PB
PR
RS232
R
SUB
WOOFER
OPTICAL
FRONT/D. MIX
1
2
OUT
S VIDEO
REMOTE
CONTROL
IN
L
AUDIO OUTPUT
FRONT/D. MIX
1
2
VIDEO OUTPUT
DIGITAL
SURR
CENTER
COAXIAL
L
SUPER AUDIO CD & DVD AUDIO/
VIDEO PLAYER
COMPONENT 2
Y
PB
R
COMPONENT 1
PR
Y
PB
REMOTE
CONTROL
PR
MODEL NO. DPS-6.5
RATING:
AC 120 V
R
SUB
WOOFER
60Hz
11 W
OPTICAL
AUDIO OUTPUT
FRONT/D. MIX
SURR CENTER
1
2
AV receiver
SUB
WOOFER
Signal flow
FRONT
R
SUB
L
CENTER
SURR
AV receiver
• The remote controller supplied with Integra AV
receiver or amplifiers can be used to control the DPS6.5.
• The function of the upper and lower
connectors are
the same. Connect to either one.
• Connecting an
cable only does not make the system operational. You must also connect the audio
cables as well.
• For remote control operation, you must make an analog RCA connection between your DPS-6.5 and the
other AV component, even if they are connected digitally.
You can use the S video or component video jacks to
connect to the AV receiver if you prefer.
Tip:
• After connecting up and switching on, you should
change the Audio Output Mode setting in the Initial
Setup menu from the default 2 Channel to 5.1 Channel. See also Audio Output Mode on page 45, 49.
Downloaded From Disc-Player.com Integra Manuals
21
Connecting the DPS-6.5—Continued
Controlling AV Components that are Out of Range
You can use the following multi-room kits to control the
DPS-6.5 when it’s out of range of the remote controller:
• Onkyo Multi-Room System (IR Remote Controller
Extension System)
• Multiroom AV distribution and control systems such
as those made by Niles® and Xantech®.
Controlling Other Out-of-range AV Components
If another AV component is out of range of its remote
controller, you can use a commercially available IR
emitter to retransmit the remote controller signals
received at the DPS-6.5’s IR IN, as shown below.
IR
IR receiver
Connecting
block
IN
IR IN
IR OUT
OUT
REMOTE
CONTROL
VIDEO
PB
IR emitter
IR
VIDEO OUTPUT
COMPONENT 2
Y
IN
AC INLET
COMPONENT 1
PR
Y
PB
DPS-6.5
PR
RS232
Remote controller
OUT
S VIDEO
Other
component
: Signal flow
Controlling the DPS-6.5 When It’s Out of Range
If the DPS-6.5 is located in another room, installed in a
cabinet, or out of range of its remote controller, you can
use a commercially available IR receiver to pickup the
remote controller signals and feed them to the DPS-6.5,
as shown below.
Connect the IR emitter to the DPS-6.5’s IR OUT, and
place the IR emitter in front of the other AV component’s
remote control sensor (usually located on its front
panel), as shown below. See the instructions supplied
with the IR emitter.
Other component
IR receiver
Connecting
block
Remote control
sensor
from connecting block
IR IN
IR emitter
Miniplug cable
DPS-6.5
Remote controller
IR
Miniplug
IN
Inside
cabinet
OUT
: Signal flow
IR Emitter
DPS-6.5
:Signal flow
Connect the IR receiver to the DPS-6.5 as shown below.
from connecting block
Miniplug cable
IR
IN
OUT
DPS-6.5
22
Downloaded From Disc-Player.com Integra Manuals
Only remote controller signals received by the DPS6.5’s IR IN are fed through to the IR OUT. Signals
picked up by the DPS-6.5’s remote control sensor are not
output.
Connecting the Power/Turning on the DPS-6.5
Before connecting
• Make sure that all the connections on pages 17 – 21
are complete (the connection to a TV is required).
1
Plug the supplied power cord into
the AC INLET and then into the
power outlet on the wall.
• Do not use a power cord other than the
one supplied with the DPS-6.5. The
power cord supplied is designed for
use with the DPS-6.5 and should not
be used with any other device.
• Never have the power cord disconnected from the DPS-6.5 while the
other end is plugged into the wall outlet. Doing so may cause an electric
shock. Always connect by plugging
into the wall outlet last and disconnect
by unplugging from the wall outlet
first.
Standby/On
Standby indicator
Standby/On
Open /Close
Progressive
Display
Play Mode
Dimmer
Clear
Pause
Stop
Play
Standby
DPS-6.5
On
On
Standby
1
2
3
4
5
6
7
8
9
0
Clear
Open/
Close
Play Mode
Display
Dimmer
Top Menu
To a wall outlet
Menu
2
Enter
Standby/On
Return
Setup
Audio
Angle Subtitle Zoom
Stop
Play
Down
Pause
Up
T V Control
T V/ Video Channel
On/
Standby
Remote
controller
Volume
On
RC - 583DV
Press Standby/On on the DPS-6.5
or On on the remote controller.
The DPS-6.5 turns on and the Standby
indicator turns off.
• To put the DPS-6.5 in the standby
mode, press Standby/On on the DPS6.5, or Standby on the remote controller. Be sure to set the volume to minimum before putting the DPS-6.5 in the
standby mode for the next use to avoid
sudden loud sound reproduction.
• While the Standby indicator lights up,
the DPS-6.5 can receive signals from
the remote controller.
• Setting the Standby/On button to
standby does not shut off the power
completely.
Note:
• This player features a screen saver and an auto power
off function. If the player is stopped and no button is
pressed for five minutes, the screen saver starts. If the
disc tray is closed but no disc is playing and no control
is pressed for 30 minutes, the player automatically
goes into standby.
Downloaded From Disc-Player.com Integra Manuals
23
Getting Started
Using the on-screen displays
Setting up the player for your TV
About the on-screen displays
Video, audio, and other settings can easily be set by
using the on-screen setup menus that appear on the connected TV.
About the setup navigator and other displayed items
Operations related to the remote controller buttons are
displayed at the bottom of the screen, as shown below. In
addition, a brief explanation of the currently selected
item also appears at the bottom of the screen.
If you have a widescreen (16:9) TV, you should setup the
player so that the picture will be presented correctly. If
you have a conventional (4:3) TV, you can leave the
player on the default setting and move on to the next section.
On
Standby
1
2
3
4
5
6
7
8
9
0
Clear
Open/
Close
Play Mode
Display
Standby/On
Open /Close
Progressive
Display
Play Mode
Dimmer
Clear
Stop
Pause
Play
Dimmer
Standby
DPS-6.5
Top Menu
Return Setup
Menu
Enter
Return
Setup
Audio
Angle Subtitle Zoom
Setup
Stop
On
Standby
Down
2
3
Display
4
5
Pause
Up
T V Control
T V/ Video Channel
Play Mode
1
Play
Open/
Close
On/
Standby
6
Volume
Dimmer
7
8
9
0
Clear
Top Menu
/
Menu
/ /
1
Press Setup and select “Initial Settings”.
Setup
Enter
Enter
Return
Setup
Audio
Angle Subtitle Zoom
Return
Initial Settings
Setup
Stop
Play
Pause
Down
2
Up
T V Control
TV/ Vid
Ch
Initial Settings
l
Note:
• From here on in this manual, the word “select”
generally means use the cursor buttons to highlight
an item on-screen, then press Enter.
DPS-6.5
buttons
Remote
controller
buttons
Setup
Setup
OnScreen
HOME
MENU
What it does
Digital Audio Out
Video Output
Language
Display
Options
TV Screen
Component Out
4:3 (Letter Box)
4:3 (Pan&Scan)
16:9 (Wide)
Speakers
3
If you have a widescreen (16:9) TV,
select “16:9 (Wide)”.
If you have a conventional (4:3) TV, you
can change the setting from 4:3 (Letter
Box) to 4:3 (Pan & Scan) if you prefer.
See “Video Output settings” on page 43
for more details.
4
Press Setup to exit the menu
screen.
Display/exit the onscreen display.
Changes the highlighted menu item.
Cursor
Select “TV Screen” from the
“Video Output” settings.
Enter
Push To Enter
Cursor
Enter
Push To Enter
Return
24
Return
Selects the highlighted menu item
(both Enter butENTER
tons on the remote
work in exactly the
same way).
—
Returns to the
main menu without
saving changes.
Downloaded From Disc-Player.com Integra Manuals
Setup
Getting Started—Continued
Setting the language of this player’s
on-screen displays
4
Press Setup to exit the menu
screen.
Setup
This sets the language of this system’s on-screen displays.
On
Standby
Open/
Close
Playing discs
Play Mode
1
2
3
4
5
6
Display
Dimmer
7
8
9
0
Clear
Top Menu
Menu
Enter
Return
Setup
Audio
Angle Subtitle Zoom
Setup
Stop
Play
Down
Pause
Up
T V Control
T V/ Video Channel
On/
St db
The basic playback controls for playing DVD, CD,
SACD, Video CD and MP3/WMA discs are covered
here. Further functions are detailed in the next chapter.
For details on playing JPEG picture discs, see “Viewing
a JPEG slideshow” on page 29.
Important:
• Throughout this manual, the term “DVD” means DVDVideo, DVD-Audio and DVD-R/ RW. If a function is
specific to a particular kind of DVD disc, it is specified.
Standby/On
V l
Standby/On
Open /Close
Progressive
1
Press Setup and select “Initial Settings”.
Display
Play Mode
Dimmer
Clear
Pause
Stop
Play
Standby
DPS-6.5
Setup
Initial Settings
On
2
Standby
Open/
Close
On
Select “OSD Language” from the
“Display” settings.
Play Mode
1
2
3
4
5
6
7
8
9
0
Clear
Open/
Close
Display
Initial Settings
Dimmer
Digital Audio Out
Video Output
OSD Language
Angle Indicator
Language
Display
Options
Top Menu
Speakers
Enter
The available languages vary between
models.
• North American model: English, French,
Spanish, German, Italian, Other Language.
• Australian model: English, French, Spanish, Chinese, Other Language.
• Note that the language you choose
here may not be available on all discs.
• If you want to select a language other
than those listed, select “Other Language.” See “Selecting languages
using the language code list” on
page 52 for detailed information.
3
Select a language.
The on-screen language will change
according to your selection.
Menu
Return
Setup
Audio
Angle Subtitle Zoom
Stop
Play
Down
Pause
Up
T V Control
T V/ Video Channel
1
Standby/On
2
Open /Close
If the player isn’t already on, press
Standby/On to switch it on.
If you’re playing a DVD or Video CD,
also turn on your TV and make sure that
it is set to the correct video input.
Press
Open/Close to open the
disc tray.
Remote
controller
Open/
Close
Downloaded From Disc-Player.com Integra Manuals
25
Getting Started—Continued
3
Load a disc.
Load a disc with the label side facing up,
using the disc tray guide to align the disc
(if you’re loading a double-sided DVD
disc, load it with the side you want to
play face down).
Button
What it does
Starts playback.
If the display shows RESUME or LAST
MEM playback starts from the resume
or last memory point (see also “Resume
and Last Memory” on page 26.)
Pauses a disc that’s playing, or
restarts a paused disc.
Stops playback.
See also “Resume and Last Memory”
on page 26.
Press to start fast reverse scanning.
Press
(play) to resume normal
(remote only)
playback.
4
Play
Remote
controller
Play
Press
(play) to start playback.
If you’re playing a DVD or Video CD, an
on-screen menu may appear. See “DVD
disc menus” on page 27 and “Video CD
PBC menus” on page 27 for more on
how to navigate these.
• If you’re playing an MP3/WMA disc,
it may take a few seconds before playback starts.
Note:
• You may find with some DVD discs that some playback controls don’t work in certain parts of the disc.
This is not a malfunction.
Basic playback controls
The table below shows the basic controls on the remote
for playing discs. The following chapter covers other
playback features in more detail.
On
Standby
1
2
3
4
5
6
7
8
9
0
Clear
Open/
Close
Play Mode
Display
Numbers
Dimmer
Top Menu
Menu
Enter
Return
Setup
Audio
Angle Subtitle Zoom
Stop
Play
Down
Pause
Up
/
/
T V Control
T V/ Video Channel
On/
Standby
26
Volume
Downloaded From Disc-Player.com Integra Manuals
Press to start fast forward scanning.
Press
(play) to resume normal
(remote only)
playback.
Skips to the start of the current track or
chapter, then to previous tracks/chapters.
Skips to the next track or chapter.
Use to enter a title/chapter/track number.
Press Enter to select.
• If the disc is stopped, playback starts
from the selected title (for DVD),
group (for DVD-Audio) or track (for
Numbers
CD/SACD/Video CD).
(remote only) • If the disc is playing, playback jumps
to the start of the selected title (VR
mode DVD-RW), chapter (DVDVideo) or track (DVD-Audio*1/SACD/
CD/Video CD)
*1 within the current group
Resume and Last Memory
With the exception of DVD-Audio and SACD discs,
when you stop playback of a disc, RESUME is shown in
the display indicating that you can resume playback
again from that point.
If the disc tray is not opened, the next time you start playback the display shows RESUME and playback resumes
from the resume point. (If you want to clear the resume
point, press (stop) while RESUME is displayed.)
If you take a VCD out of the player after stopping playback, the last play position is stored in memory. If the
next disc you load is the same one, the display shows
LAST MEM and playback will resume. For DVD-Video
discs (except VR mode DVD-RW), the player stores the
play position of the last five discs. When one of these
discs is next loaded, you can resume playback.
Notes:
• The Last Memory function doesn’t work with VR format DVD-RW, DVD-Audio or SACD discs.
• If you don’t need the Last Memory function when you
stop a disc, you can press Open/Close to stop playback
and open the disc tray.
Getting Started—Continued
DVD disc menus
Video CD PBC menus
Many DVD-Video and DVD-Audio discs feature menus
from which you can select what you want to watch.
They may also give access to additional features, such as
subtitle and audio language selection, or special features
such as slideshows. See the disc packaging for details.
Sometimes DVD-Video menus are displayed automatically when you start playback; others only appear when
you press Menu or Top Menu.
Some Video CD have menus from which you can choose
what you want to watch. These are called PBC (Playback
control) menus.
You can play a PBC Video CD without having to navigate the PBC menu by starting playback using a number
button to select a track, rather than the
(play) button.
On
Standby
1
2
3
4
5
6
7
8
9
0
Clear
Open/
Close
Play Mode
On
Standby
Open/
Close
Numbers
Display
Dimmer
Play Mode
1
2
3
Display
Numbers
4
5
6
7
8
9
0
Clear
Top Menu
Dimmer
Top Menu
/
/ /
Enter
Menu
Top Menu
Menu
Menu
Return
Setup
Audio
Angle Subtitle Zoom
Return
Enter
Enter
Return
Setup
Audio
Angle Subtitle Zoom
Return
Stop
Play
Enter
Stop
Play
Pause
Down
Up
/
Pause
T V Control
T V/ Video Channel
Down
Up
T V Control
T V/ Video Channel
Important:
• Some DVD-Audio discs feature a “bonus group”. To
play this group you first have to input a password,
which you can find on the disc’s packaging. Use the
number buttons to input the password.
Button
What it does
Top Menu
Displays the “top menu” of a DVD
disc—this varies with the disc.
Menu
Displays a DVD disc menu—this varies with the disc and may be the same
as the “top menu”.
/
/
/
Button
Return
What it does
Displays the PBC menu.
Use to enter a numbered menu option.
Numbers
(remote only) Press Enter to select.
Displays the previous menu page (if
there is one).
Displays the next menu page (if there
is one).
Moves the cursor around the screen.
Enter
Selects the current menu option.
Return
Returns to the previously displayed
menu screen. On some DVD-Audio
discs featuring browsable pictures,
press to display the browser screen.
Highlights a numbered menu option
Numbers
(some discs only). Press Enter to
(remote only)
select.
Downloaded From Disc-Player.com Integra Manuals
27
Playing discs
Notes:
• Many of the functions covered in this chapter apply to
DVD and SACD discs, Video CDs, CDs and WMA/
MP3 JPEG discs, although the exact operation of
some varies slightly with the kind of disc loaded.
• Some DVDs restrict the use of some functions (random or repeat, for example) in some or all parts of the
disc. This is not a malfunction.
• When playing Video CD, some of the functions are not
available during PBC playback. If you want to use
them, start the disc playing using a number button to
select a track.
Playing in slow motion
Playing in slow motion You can play DVD-Videos and
DVD-R/RW at four different slow motion speeds, forwards and backwards. Video CD/Super VCDs can be
played at four different forward slow motion speeds.
On
Standby
1
2
3
4
5
6
Open/
Close
Play Mode
Display
Dimmer
7
Scanning discs
8
9
0
Clear
Top Menu
You can fast-scan discs forward or backward at four different speeds.
Enter
Return
Setup
Audio
Angle Subtitle Zoom
Stop
On
Standby
1
2
On/
Standb
Display
Pause
Up
Volume
6
Dimmer
7
Down
T V Control
T V/ Video Channel
3
5
Play
/
Open/
Close
Play Mode
4
Menu
8
9
0
Clear
Top Menu
Menu
1
During playback, press
(pause).
Pause
Enter
Return
Setup
Audio
Angle Subtitle Zoom
Stop
Play
Down
Pause
Up
2
Press and hold
or
until slow motion playback starts.
• The slow motion speed is shown onscreen.
• There is no sound during slow motion
playback.
3
Press repeatedly to change the
slow motion speed.
4
To resume normal playback, press
(play).
• Depending on the disc, normal playback may automatically resume when
a new chapter is reached.
/
T V Control
T V/ Video Channel
O /
1
During playback, press
or
to start scanning.
• There is no sound while scanning
DVDs (including DVD-Audio) and
Video CD/ Super VCDs.
2
Press repeatedly to increase the
scanning speed.
• The scanning speed is shown onscreen.
3
Play
28
To resume normal playback, press
(play).
• When scanning a Video CD playing in
PBC mode or a WMA/MP3 track,
playback automatically resumes at the
end or beginning of the track.
• Depending on the disc, normal playback may automatically resume when
a new chapter is reached on a DVD
disc.
Downloaded From Disc-Player.com Integra Manuals
Play
Note:
• Backward slow-motion playback does not work with
Video CD.
Playing discs—Continued
Frame advance/frame reverse
Viewing a JPEG slideshow
You can advance or back up DVD-Video and DVD-R/
RW discs frame-by-frame. With Video CD you can only
use frame advance.
On
Standby
1
2
3
4
5
6
7
8
9
0
Clear
Open/
Close
Play Mode
Display
After loading a CD/CD-R/RW containing JPEG picture
files, press
(play) to start a slideshow from the first
folder/picture on the disc. The player displays the pictures in each folder in alphabetical order.
Pictures are automatically adjusted so that they fill as
much of the screen as possible (if the aspect ratio of the
picture is different to your TV screen you may notice
black bars at the sides, or at the top and bottom of the
screen).
Dimmer
Top Menu
Menu
On
Standby
1
2
3
4
5
6
7
8
9
0
Clear
Open/
Close
Enter
Return
Setup
Audio
Angle Subtitle Zoom
Stop
/
Play
Down
Play Mode
Display
Dimmer
Pause
/
Up
Top Menu
/ /
Menu
Menu
T V Control
T V/ Video Channel
Enter
1
During playback, press
Return
Setup
Audio
Angle Subtitle Zoom
(pause).
Pause
Stop
Play
Pause
Down
Zoom
Up
/
T V Control
T V/ Video Channel
While the slideshow is running:
2
Press
or
to reverse
or advance a frame at a time.
Button
What it does
Pauses the slideshow; press again to
restart.
Displays the previous picture.
3
Play
To resume normal playback, press
(play).
• Depending on the disc, normal playback may automatically resume when
a new chapter is reached.
Note:
• Backward frame-by-frame playback does not work
with Video CD.
Displays the next picture.
/
Pauses the slideshow and rotates the
displayed picture 90˚ (counter)clockwise. (Press
(play) to restart slideshow).
/
Pauses the slideshow and flips the displayed picture horizontally or vertically.
(Press
(play) to restart slideshow).
Zoom
Pauses the slideshow and zooms the
picture. Press again to toggle between
1x, 2x and 4x zoom. (Press
(play)
to restart slideshow).
Menu
Displays the Disc Navigator screen
(see below).
Notes:
• The time it takes for the player to load a file increases
with large file sizes.
• Discs can contain up to 299 folders and up to 648 folders and files combined.
Downloaded From Disc-Player.com Integra Manuals
29
Playing discs—Continued
Browsing video content with the Disc
Navigator
• Playlist: Title – Playlist titles from a
VR mode DVD-RW disc.
• Original: Time – Thumbnails from
the Original content at 10 minute intervals.
• Playlist: Time – Thumbnails from the
Playlist at 10 minute intervals.
The screen shows up to six moving
thumbnail images displayed one after
another. To display the previous/next six
thumbnails, press
/
(you don’t
have to wait for all the thumbnails to finish playing to display the previous/next
page).
Use the Disc Navigator to browse through the contents
of a DVD-Video, DVD-RW or Video CD disc to find the
part you want to play.
Important:
• You can’t use the Disc Navigator with Video CD in
PBC mode.
On
Standby
1
2
3
4
5
6
7
8
9
0
Clear
Open/
Close
Play Mode
Display
3
Dimmer
Top Menu
Select the thumbnail image for
what you want to play.
Menu
01
02
03
04
05
06
Enter
Enter
Return
Setup
Audio
Angle Subtitle Zoom
Setup
Stop
Play
Pause
Down
Up
/
T V Control
T V/ Video Channel
1
Setup
During playback, press Setup and
select “Disc Navigator” from the
on-screen menu.
Disc Navigator
2
Select a view option.
Disc Navigator
Title
Chapter
The options available depend on the kind
of disc loaded and whether the disc is
playing or not, but include:
• Title – Titles from a DVD-Video
disc.
• Chapter – Chapters from the current
title of a DVD-Video disc.
• Track – Tracks from a Video CD
disc.
• Time – Thumbnails from a Video CD
disc at 10 minute intervals.
• Original: Title – Original titles from
a VR mode DVD-RW disc.
30
Downloaded From Disc-Player.com Integra Manuals
Disc Navigator: Title
01- 49: - -
You can use either the cursor buttons
( / / / ) and Enter to select a
thumbnail, or the number buttons.
To select using the number buttons, enter
a two-digit number then press Enter.
Tip:
• Another way to find a particular place on a disc is to
use one of the search modes. See “Searching a disc”
on page 35.
Playing discs—Continued
Browsing WMA, MP3 and JPEG files
with the Disc Navigator
Use the Disc Navigator to find a particular file or folder
by filename.
On
Standby
Open/
Close
Play Mode
1
2
3
4
5
6
7
8
9
0
Clear
3
Enter
To play the highlighted track or
display the highlighted JPEG file,
press Enter.
• When a WMA/MP3 file is selected,
playback begins, starting with the
selected track, and continues until the
end of the folder.
• When a JPEG file is selected, a slideshow begins, starting with that file, and
continues to the end of the folder.
Display
Dimmer
Top Menu
/
/ /
Menu
Enter
Enter
Return
Setup
Audio
Angle Subtitle Zoom
Tip:
• To play the contents of the whole disc rather than just
the current folder, exit the Disc Navigator and start
playback using the
(play) button.
Setup
Stop
Play
Down
1
Setup
Pause
Up
Press Setup and select “Disc Navigator” from the on-screen menu.
00:00/ 00:00
0kbps
Folder1
Folder2
Folder3
Folder4
2
Enter
Use the cursor buttons ( / / /
) and Enter to navigate.
Use the cursor up/down buttons ( / )
to move up and down the folder/file list.
Use the cursor left button ( ) to return
to the parent folder.
Use Enter or cursor right ( ) to open a
highlighted folder.
• You can also return to the parent folder
by going to the top of the list to the “..”
folder, then pressing Enter.
• When a JPEG file is highlighted, a
thumbnail image is displayed on the
right.
00:00/ 00:00
0kbps
Folder 2
File1
File2
File3
File4
File5
Downloaded From Disc-Player.com Integra Manuals
31
Playing discs—Continued
Looping a section of a disc
Using repeat play
The A-B Repeat function allows you to specify two
points (A and B) within a track (CD, Video CD) or title
(DVD-Video and DVD-RW) that form a loop which is
played over and over.
• You can’t use A-B Repeat with DVD-Audio, SACD,
and Video CD in PBC mode, or WMA /MP3 files.
On
Standby
1
2
There are various repeat play options, depending on the
kind of disc loaded. It’s also possible to use repeat play
together with program play to repeat the tracks/chapters in
the program list (see “Creating a program list” on page 34).
Important:
• You can’t use Repeat play with Video CD in PBC
mode, or with WMA/MP3 discs.
• You can’t use repeat and random play at the same time.
Open/
Close
On
Play Mode
3
Display
4
5
6
7
8
9
Standby
Open/
Close
Play Mode
Play Mode
Dimmer
1
2
3
4
5
6
7
8
9
0
Clear
Display
0
Clear
Top Menu
Menu
/
/ /
Dimmer
Enter
Top Menu
Return
Setup
Audio
Angle Subtitle Zoom
Stop
Play
Play Mode
Menu
Enter
Enter
Return
Setup
Audio
Angle Subtitle Zoom
Pause
Down
Up
Stop
Play
T V Control
T V/ Video Channel
Pause
Down
Up
On/
1
Play Mode
During playback, press Play Mode
and select “A-B Repeat” from the
list of functions on the left.
A-B Repeat
Repeat
A(Start Point)
B(End Point)
Random
Program
Search Mode
Off
Press Enter on “A(Start Point)” to
set the loop start point.
Enter
3
Enter
1
Play Mode
Play Mode
2
T V Control
T V/ Video Channel
Press Enter on “B(End Point)” to
set the loop end point.
After pressing Enter, playback jumps
back to the start point and plays the loop.
During playback, press Play Mode
and select “Repeat” from the list of
functions on the left.
Play Mode
2
A-B Repeat
Repeat
Title Repeat
Chapter Repeat
Random
Program
Search Mode
Repeat Off
Select a repeat play option.
If program play is active, select Program
Repeat to repeat the program list, or
Repeat Off to cancel.
The repeat options available depend on
the kind of disc loaded. For example, for
DVD-Video and DVD-RW discs, you
can select Title Repeat or Chapter Repeat
(or Repeat Off).
Play Mode
4
To resume normal playback, select
“Off” from the menu.
A-B Repeat
Repeat
Random
Program
Search Mode
Title Repeat
Chapter Repeat
Repeat Off
• For DVD-Audio discs, select Group
Repeat or Track Repeat (or Repeat Off).
• For SACDs, CDs and Video CD, select
Disc Repeat or Track Repeat (or Repeat
Off).
32
Downloaded From Disc-Player.com Integra Manuals
Playing discs—Continued
Using random play
1
Use the random play function to play titles or chapters
(DVD-Video), Groups (DVD-Audio), or tracks (DVDAudio, SACD, CD, Video CD) at random. (Note that the
same track/title/chapter may play more than once.)
You can set the random play option when a disc is playing or stopped.
Important:
• Random play remains in effect until you select Random Off from the random play menu options.
• You can’t use random play with VR format DVD-RW
discs, Video CD playing in PBC mode, WMA/MP3
discs, or while a DVD disc menu is being displayed.
• You can’t use random play together with program or
repeat play.
Play Mode
Press Play Mode and select “Random” from the list of functions on
the left.
Play Mode
A-B Repeat
Random Title
Repeat
Random
Random Chapter
Random Off
Program
Search Mode
2
Select a random play option.
The random play options available
depend on the kind of disc loaded. For
example, for DVD-Video discs, you can
select Random Title or Random Chapter,
(or Random Off).
Play Mode
On
Standby
1
2
3
4
5
6
Open/
Close
A-B Repeat
Repeat
Create/Edit
Playback Start
Random
Program
Search Mode
Playback Stop
Program Delete
Play Mode
Display
Play Mode
• For DVD-Audio discs, select Random
Group or Random Track, (or Random
Off).
• For CDs, SACDs and Video CD, select
On or Off to switch random play on or
off.
Dimmer
7
8
9
0
Clear
Top Menu
Menu
Enter
Return
Setup
Audio
Angle Subtitle Zoom
Stop
Play
Down
Pause
Up
/
T V Control
T V/ Video Channel
On/
Standby
Tip:
• Use the following controls during random play:
Volume
Button
RC - 583DV
What it does
Selects a new track/title/chapter at
random.
Returns to the beginning of the current
track/title/chapter; further presses
select another random track/title/chapter.
Downloaded From Disc-Player.com Integra Manuals
33
Playing discs—Continued
Creating a program list
3
Use the cursor buttons and Enter
to select a title, chapter or track for
the current step in the program list.
For a DVD-Video disc, you can add a
title or a chapter to the program list.
This feature lets you program the play order of titles/
chapters/tracks on a disc.
Important:
• You can’t use Program play with VR format DVD-RW
discs, Video CD playing in PBC mode, WMA/MP3
discs, or while a DVD disc menu is being displayed.
On
Standby
Program
Open/
Close
2
3
4
5
6
Display
Play Mode
Dimmer
7
8
9
0
Clear
Top Menu
Menu
Clear
/ / /
Enter
Return
Setup
Audio
Angle Subtitle Zoom
Stop
Play
Down
Enter
Pause
4
Volume
RC - 583DV
1
Play Mode
Press Play Mode and select “Program” from the list of functions on
the left.
5
Play
Play Mode
A-B Repeat
Repeat
Create/Edit
Playback Start
Random
Program
Search Mode
Playback Stop
Program Delete
Chapter 1~4
Title 01
Title 02
Title 03
Title 04
Title 05
Title 06
Title 07
Title 08
Chapter 001
Chapter 002
Chapter 003
Chapter 004
Repeat step 3 to build up a program list.
A program list can contain up to 24 titles/
chapters/tracks.
• You can insert steps into the middle of
a program list by just highlighting the
position where you want the new step
to appear and entering a title/chapter/
track number.
• To delete a step, highlight it and press
Clear.
Up
T V Control
T V/ Video Channel
On/
Standby
Title 1~38
01. 01
02.
03.
04.
05.
06.
07.
08.
• For a DVD-Audio disc, you can add a
whole group, or a track within a group
to the program list.
• For a CD, SACD or Video CD, select a
track to add to the program list.
After pressing Enter to select the title/
chapter/track, the step number automatically moves down one.
Play Mode
1
Program Step
To play the program list, press
(play).
Program play remains active until you
turn off program play (see below), erase
the program list (see below), eject the
disc or switch off the player.
Tip:
Use the following controls during program play:
2
Select “Create/Edit” from the list of
program options.
Button
Play Mode
What it does
Save the program list and exit the program edit screen without starting playback (Setup does the same).
Skip to the next step in the program list.
34
Downloaded From Disc-Player.com Integra Manuals
Playing discs—Continued
Other functions available from the
program menu
There are a number of other options in the program menu
in addition to Create/Edit.
• Playback Start – Starts playback of a saved program
list
• Playback Stop – Turns off program play, but does not
erase the program list
• Program Delete – Erases the program list and turns
off program play
3
1
2
3
4
5
6
7
8
9
Play Mode
0
Chapter Search
Time Search
Input Chapter
0 0 1
• For a time search, enter the number of
minutes and seconds into the currently
playing title (DVD) or track (CD/
Video CD) you want playback to
resume from. For example, press 4, 5,
0, 0 to have playback start from 45
minutes into the disc. For 1 hour, 20
minutes and 30 seconds, press 8, 0, 3,
0.
• Some DVD-Audio discs feature pages
of browsable pictures. Enter the page
number you want.
4
Open/
Close
Title Search
Repeat
Random
Search Mode
You can search DVD-Video discs by title or chapter
number, or by time; DVD-Audio discs can be searched
by group or track number; SACDs by track number, CDs
and Video CD by track number or time.
Important:
• Search functions are not available with Video CD in
PBC mode, or with WMA/MP3 discs.
Standby
A-B Repeat
Program
Searching a disc
On
Use the number buttons to enter a
title, chapter or track number, or a
time.
Press Enter to start playback.
Enter
Play Mode
1
2
3
4
5
6
Display
Numbers
Play Mode
Dimmer
7
8
9
0
Clear
Top Menu
/
/ /
Menu
Enter
Return
Setup
Audio
Angle Subtitle Zoom
Stop
Play
Down
Enter
Pause
Up
T V Control
T V/ Video Channel
On/
Standby
Volume
RC - 583DV
1
Play Mode
2
Press Play Mode and select
“Search Mode” from the list of
functions on the left.
The search options available depend on
the kind of disc loaded.
Select a search mode.
• The disc must be playing in order to
use time search.
Downloaded From Disc-Player.com Integra Manuals
35
Playing discs—Continued
Switching subtitles
Switching audio language/channel
Some DVD-Video discs have subtitles in one or more
languages; the disc box will usually tell you which subtitle languages are available. You can switch subtitle language during playback.
On
Standby
1
2
3
4
5
6
7
8
9
0
Clear
Open/
Close
Play Mode
Display
Dimmer
Top Menu
When playing a DVD-Video disc recorded with dialog in
two or more languages, you can switch audio language
during playback.
When playing a VR format DVD-RW disc recorded with
dual-mono audio, you can switch between the main, sub,
and mixed channels during playback.
When playing a DVD-Audio disc, you may be able to
switch channels—see the disc box for details. (When
you change the audio channel, playback restarts from the
beginning of the current track.)
When playing a Video CD, you can switch between stereo, just the left channel or just the right channel.
Menu
Enter
Return
Setup
Audio
Angle Subtitle Zoom
Stop
Play
Pause
On
Standby
1
2
3
4
5
6
7
8
9
0
Clear
Open/
Close
Subtitle
Play Mode
Down
Up
Display
Dimmer
T V Control
T V/ Video Channel
On/
Standby
Volume
Top Menu
1
Subtitle
Press Subtitle repeatedly to select
a subtitle option.
Current / Total
Subtitle
1/2
Enter
Audio
English
Notes:
• Some discs only allow you to change
subtitle language from the disc menu.
Press Top Menu or Menu to access.
• To set subtitle preferences, see “Language settings” on page 44.
36
Return
Setup
Audio
Angle Subtitle Zoom
Stop
Play
Down
Pause
Up
T V Control
T V/ Video Channel
On/
Standby
1
Audio
Downloaded From Disc-Player.com Integra Manuals
Menu
Volume
Press Audio repeatedly to select
an audio language/channel option.
The language/channel information is
shown on-screen.
Notes:
• Some DVD discs only allow you to
change audio language from the disc
menu. Press Top Menu or Menu to
access.
• To set DVD audio language preferences, see “Language settings” on
page 44.
Playing discs—Continued
Zooming the screen
Switching camera angles
Using the zoom feature you can magnify a part of the
screen by a factor of 2 or 4, while watching a DVD or
Video CD or playing a JPEG disc.
Play Mode
1
2
3
4
5
6
7
8
9
0
Clear
Display
Dimmer
Top Menu
Menu
/
Some DVD discs feature scenes shot from two or more
angles—check the disc box for details.
When a multi-angle scene is playing, a
icon appears
on screen to let you know that other angles are available
(this can be switched off if you prefer—see “Display settings” on page 44).
0
/ /
Menu
Enter
Enter
Setup
Return
Setup
Angle Subtitle Zoom
Audio
Angle Subtitle Zoom
Return
Audio
Stop
Play
Down
Pause
Angle
Zoom
Stop
Zoom
2
Play
Use the cursor buttons to change
the zoomed area.
You can change the zoom factor and the
zoomed area freely during playback.
• If the navigation square at the top of
the screen disappears, press Zoom
again to display it.
1
Angle
V l
During playback (or when paused),
press Angle to switch angle.
Displaying disc information
Various track, chapter and title information, such as the
elapsed and remaining playing time can be displayed onscreen while a disc is playing.
Note:
• If you are displaying subtitles, these will disappear
when the screen is zoomed. They will reappear when
you return the screen to normal.
On
Standby
1
2
3
4
5
6
7
8
9
0
Clear
Open/
Close
Play Mode
Display
Dimmer
Top Menu
1
Display
Downloaded From Disc-Player.com Integra Manuals
Up
T V Control
T V/ Video Channel
On/
St db
Volume
During playback, use the Zoom
button to select the zoom factor
(Normal, 2x or 4x).
• Since DVD, Video CD and JPEG pictures have a fixed resolution, picture
quality will deteriorate, especially at
4x zoom. This is not a malfunction.
Pause
Down
Up
T V Control
T V/ Video Channel
On/
Standby
1
Clear
Top Menu
Display
Menu
To show/switch/hide the information displayed, press Display
repeatedly.
• When a disc is playing, the information appears at the top of the screen.
37
DivX® video playback on the DPS-6.5 (not North
American model)
About DivX
DivX is a compressed digital video format created by the
DivX® video codec from DivXNetworks, Inc. This
player can play DivX video files burned on CD-R/RW/
ROM discs. Keeping the same terminology as DVDVideo, individual DivX video files are called “Titles.”
When naming files/titles on a CD-R/RW disc prior to
burning, keep in mind that by default they will be played
in alphabetical order.
DivX video compatibility
• Official DivX® Certified product.
• Plays DivX® 5, DivX® 4, DivX® 3 and DivX® VOD
video content (in compliance with DivX® Certified
technical requirements).
• File extensions: .avi and .divx (these must be used for
the player to recognize DivX video files). Note that all
files with the .avi extension are recognized as MPEG4,
but not all of these are necessarily DivX video files
and therefore may not be playable on this player.
• Media: ISO 9660* formatted CD-R/RW/ROM
Playing DivX video
If a disc contains only DivX video files, you can start
playback right away. The table below shows all the basic
playback controls.
If a disc contains a mixture of DivX video and other
media file types (MP3, for example), first select whether
to play the DivX video files (DivX) or the other media
file types (MP3/WMA/JPEG) from the on-screen display.
Note:
• The player may take some time to find a title on a disc
when you start playback, etc. This is normal.
Button
What it does
Starts or resumes playback.
Titles are played in alphabetical order.
Pauses a disc that’s playing, or
restarts a paused disc.
Stops playback. RESUME shows in
the front panel display indicating that
you can resume playback (press
again to clear the resume point). Note
that the resume point is lost if you
switch the player off.
* ISO 9660 Level 1 or 2 compliant. CD physical format:
Mode1, Mode2 XA Form1. Romeo and Joliet file systems
are both compatible with this player.
• Multi-session playback: No
• Unfinalized disc playback: No
• File structure: Up to 299 folders; up to 648 folders and
files combined per folder.
DivX, DivX Certified, and associated logos are trademarks of DivXNetworks, Inc. and are used under
license.
Press to start fast reverse scanning.
Press
(play) to resume normal
playback.
Press to start fast forward scanning.
Press
(play) to resume normal
playback.
Skips to the start of the current title,
then to previous titles.
Skips to the next title.
Press
, then press to advance one
frame. Press and hold
to start
slow motion playback (press repeatedly to change the slow motion play
speed).
38
Downloaded From Disc-Player.com Integra Manuals
Audio
Press to display the playback audio
type; press repeatedly to change the
playback audio type.
Subtitle
Press to display subtitle information;
press repeatedly to change subtitles.
Zoom
Press to zoom the screen. Press
repeatedly to change the zoom factor
(2x, 4x, Normal).
Display
Press repeatedly to show various disc
related information, such as elapsed,
remaining and total playing time, and
the title name.
DivX® video playback on the DPS-6.5 (not North American model)—
Continued
Browsing DivX video titles using the Disc
Navigator
Use the Disc Navigator to browse the contents of a disc.
Note that if there are other types of files on the same disc,
these will not be displayed in the Disc Navigator.
1
Setup
2
You can use the repeat play feature to repeat individual
titles on a disc.
1
During playback, press Play Mode
and select “Repeat” from the list of
functions on the left.
2
Select a repeat play option.
• Title Repeat – Repeat the currently
playing title.
• Repeat Off – Switch off repeat play.
Press Setup and select “Disc Navigator” from the on-screen menu.
Use the cursor buttons ( /
) and Enter to navigate.
Enter
Using repeat play
00:00/ 00:00
/
/
0kbps
..
Using time search
Use the time search to jump to a specified point in the
currently playing DivX title.
Sport
Comedy
Drama
Use the cursor up/down buttons ( / )
to move up and down the folder/title list.
Use the cursor left button ( ) to return
to the parent folder.
Use Enter or cursor right ( ) to open a
highlighted folder.
• You can also return to the parent folder
by going to the top of the list to the “..”
folder, then pressing Enter.
3
To play the highlighted title, press
Enter.
• Playback begins, starting with the
selected title, and continues until the
end of the folder.
Note:
• For DivX title playback, Integra tested
and verified the combination of video
and audio data as listed on page 56.
When you create a new DivX file, refer
to this list. Integra does not guarantee
the quality or operation of DivX files
that contain any combinations other
than those listed in this manual.
1
During playback, press Play Mode
and select “Search Mode” from the
list of functions on the left.
2
Select “Time Search”.
3
Use the number buttons to enter a
time.
Enter the number of minutes and seconds
into the currently playing title you want
playback to resume from. For example,
press 4, 5, 0, 0 to have playback start
from 45 minutes into the title.
4
Press Enter to start playback.
Tip:
• To play the contents of the whole disc rather than just
the current folder, exit the Disc Navigator and start
playback using the
(play) button.
Downloaded From Disc-Player.com Integra Manuals
39
DivX® video playback on the DPS-6.5 (not North American model)—
Continued
About DivX® VOD content
Playing DivX® VOD content
In order to play DivX VOD (video on demand) content
on this player, you first need to register the player with
your DivX VOD content provider. You do this by generating a DivX VOD registration code, which you submit
to your provider.
Important:
• DivX VOD content is protected by a DRM (Digital
Rights Management) system. This restricts playback
of content to specific, registered devices.
• If you load a disc that contains DivX VOD content not
authorized for your player, the message Authorization
Error is displayed and the content will not play.
• Resetting the player (as described in Resetting the
player in the main Operating Instructions) will not
cause you to lose your registration code.
Displaying your DivX VOD registration
code
1
Setup
2
Press Setup and select “Initial Settings”.
Select “Options”, then “DivX
VOD”.
Initial Settings
Enter
Digital Audio Out
Video Output
Parental Lock
DVD Playback Mode
Language
Display
Options
SACD Playback
DTS Downmix
DivX VOD
Display
Speakers
3
Select “Display”.
Your 8-digit registration code is displayed.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
DivX VOD Registration Code
01234567
Make a note of the code as you will need
it when you register with a DivX VOD
provider.
40
Downloaded From Disc-Player.com Integra Manuals
Some DivX VOD content may only be playable a fixed
number of times. When you load a disc containing this
type of DivX VOD content, the remaining number of
plays is shown on-screen and you then have the option of
playing the disc (thereby using up one of the remaining
plays), or stopping. If you load a disc that contains
expired DivX VOD content (for example, content that
has zero remaining plays), the message Rental Expired is
displayed.
If your DivX VOD content allows an unlimited number
of plays, then you may load the disc into your player and
play the content as often as you like, and no message will
be displayed.
Audio Settings and Video Adjust menus
Audio Settings menu
Video Adjust menu
The Audio Settings menu offers features for adjusting
the way discs sound.
From the Video Adjust screen you can adjust various settings that affect how the picture is presented.
7
8
9
0
Clear
Top Menu
On
Menu
Enter
Standby
Open/
Close
Enter
Return
Setup
Audio
Angle Subtitle Zoom
Setup
Play Mode
1
2
3
Display
4
5
6
7
8
9
0
Clear
Stop
Play
Pause
Dimmer
Top Menu
/
/ /
Menu
1
Setup
Press Setup and select “Video
Adjust” from the on-screen display.
Enter
Return
Setup
Audio
Angle Subtitle Zoom
Video Adjust
Setup
Stop
Play
Down
1
Setup
Pause
Up
2
Press Setup and select “Audio Settings” from the on-screen display.
Make settings using the / /
(cursor) buttons, and Enter.
Video Adjust
Enter
Sharpness
Brightness
Contrast
Gamma
Hue
Audio Settings
Chroma Level
BNR
2
Select and change settings using
the / / / (cursor) buttons,
and Enter.
Enter
High
Medium
Low
Off
Audio DRC
• Settings: High, Medium, Low, Off (default)
When watching Dolby Digital DVDs at low volume, it’s
easy to lose the quieter sounds completely—including
some of the dialog. Switching Audio DRC (Dynamic
Range Control) to on can help by bringing up the quieter
sounds, while controlling loud peaks.
How much of a difference you hear depends on the material you’re listening to. If the material doesn’t have wide
variations in volume, you may not notice much change.
Notes:
• Audio DRC is only effective with Dolby Digital audio
sources.
• Audio DRC is only effective through the digital output
when Digital Out is set to On, and Dolby Digital Out
is set to Dolby Digital > PCM (see “Digital Audio Out
settings” on page 43).
• The effect of Audio DRC depends on your speakers
and AV receiver settings.
Downloaded From Disc-Player.com Integra Manuals
Standard
0
Off
0
Off
0
0
You can adjust the following picture
quality settings:
• Sharpness – Adjusts the sharpness
of edges in the picture (Fine, Standard, Soft).
• Brightness – Adjusts the overall
brightness (–20 to +20).
• Contrast – Adjusts the contrast
between light and dark (–16 to +16).
• Gamma – Adjusts the “warmth” of
the picture (High, Medium, Low, Off).
• Hue – Adjusts the red/green balance
(Green 9 to Red 9).
• Chroma Level – Adjusts how saturated colors appear (–9 to +9).
• BNR – Switches on/off block noise
reduction (On, Off (default)).
Adjust the Brightness, Contrast, Hue and
Chroma Level settings using the /
(cursor left/right) buttons.
Audio Settings
Audio DRC
/
Brightness
3
min
max
0
Press Enter to save your settings
and exit the Video Adjust screen.
Enter
Note:
• Depending on your TV, the picture may appear distorted if the brightness is set too high. If this happens,
lower the brightness.
41
Initial Settings menu
Using the Initial Settings menu
The Initial Settings menu provides audio and video output settings, parental lock settings, and display settings,
among others.
If an option is grayed out it means that it cannot be
changed at the current time. This is usually because a
disc is playing. Stop the disc, then change the setting.
1
Press Setup and select “Initial Settings”.
Setup
Initial Settings
2
Enter
On
Standby
Open/
Close
Play Mode
1
2
3
4
5
6
7
8
9
0
Clear
Display
Dimmer
Top Menu
Menu
Enter
Enter
Return
Setup
Audio
Angle Subtitle Zoom
Setup
Stop
Play
Down
Pause
Up
T V Control
T V/ Video Channel
On/
Standby
Volume
RC - 583DV
42
Downloaded From Disc-Player.com Integra Manuals
Use the cursor buttons and Enter
to select the setting and option
you want to set.
All the settings and options are explained
on the following pages.
Notes:
• In the table on next pages, the default setting is shown
in bold: other settings are shown in italics.
• The Digital Audio Out settings only need to be set if
you have connected the digital output of this player to
an AV receiver, or other equipment.
• Check the operating instructions supplied with your
other equipment to see which digital audio formats it’s
compatible with.
• Some settings, such as TV Screen, Audio Language
and Subtitle Language may be overridden by the DVD
disc. Often these settings can also be made from the
DVD disc menu.
Initial Settings menu—Continued
Digital Audio Out settings
Setting
Digital Out
Dolby Digital Out
DTS Out
Linear PCM Out
MPEG Out
Option
What it means
On
Digital audio is output from the digital outputs. Note that there
is no digital output when playing SACDs and some DVD-Audio
discs regardless of this setting.
Off
No digital audio output.
Dolby Digital
Dolby Digital encoded digital audio is output when playing a
Dolby Digital DVD disc.
Dolby Digital > PCM
Dolby Digital audio is converted to PCM audio before being
output.
DTS
DTS encoded digital audio is output when playing a DTS disc.
(Noise will be output if your amplifier/receiver is not compatible with DTS audio.)
DTS > PCM
DTS audio is converted to PCM audio before being output.
Down Sample On
96kHz digital audio is converted to 48kHz for digital output.
Note that High sampling rate DVD-Audio discs (192kHz or
176.4kHz) automatically output down-sampled audio through
the digital outputs.
Down Sample Off
96kHz digital audio is output as is at 96kHz.
MPEG > PCM
MPEG encoded digital audio is converted to PCM audio for
digital output.
MPEG
MPEG encoded digital audio is output as is.
Video Output settings
Setting
TV Screen
(See also “Screen sizes
and disc formats” on
page 51.)
Component Out
Option
What it means
4:3 (Letter Box)
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.
4:3 (Pan & Scan)
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the
screen.
16:9 (Wide)
Set if you have a widescreen TV.
Progressive
Set if your TV is compatible with progressive scan video (see
your TV’s instruction manual for details). See also “Switching
the video output to interlace using the front panel controls” on
page 19.
Note that progressive scan video is only output from the component video jacks.
Interlace
Set if your TV is not compatible with progressive scan video.
Downloaded From Disc-Player.com Integra Manuals
43
Initial Settings menu—Continued
Language settings
Setting
Audio Language*1
Subtitle Language*2
DVD Menu Language*3
Option
What it means
English
If there is an English soundtrack on the disc then it will be
played.
Languages as displayed
If there is the language selected on the disc, then it will be
played.
Other Language
Select to choose a language other than the ones displayed
(see page 52).
English
If there is are English subtitles on the disc then they will be
displayed.
Languages as displayed
If there is the subtitle language selected on the disc, then it
will be displayed.
Other Language
Select to choose a language other than the ones displayed
(see page 52).
w/Subtitle Lang.
DVD disc menus will be displayed in the same language as
your selected subtitle language, if possible.
Languages as displayed
DVD disc menus will be displayed in the selected language, if
possible.
Other Language
Select to choose a language other than the ones displayed
(see page 52).
On
Subtitles are displayed according to your selected subtitle language (see above).
Off
Subtitles are always off by default when you play a DVD disc
(note that some discs override this setting).
Subtitle Display
*1 This setting is your preferred audio language for DVD discs.
You can switch between the languages recorded on a DVD disc during playback using the Audio button.
Some DVD discs set the audio language automatically when loaded, overriding the “Audio Language” setting.
Discs with two or more audio languages usually allow you to select the audio language from the disc menu. Press Menu to access
the disc menu.
*2 This setting is your preferred subtitle language for DVD discs.
You can change or switch off the subtitles on a DVD disc during playback using the Subtitle button.
Some DVD discs set the subtitle language automatically when loaded, overriding the “Subtitle Language” setting.
Discs with two or more subtitle languages usually allow you to select the subtitle language from the disc menu. Press Menu to
access the disc menu.
*3 Some multilingual discs have disc menus in several languages. This setting specifies in which language the disc menus should
appear. Leave on the default setting for menus to appear in the same language as your “Subtitle Language”.
Display settings
Setting
OSD Language
Angle Indicator
44
Option
What it means
English
On-screen displays of the player are in English.
Languages as displayed
On-screen displays are shown in the language selected.
On
A camera icon is displayed on-screen during multi-angle
scenes on a DVD disc.
Off
No multi-angle indication is shown.
Downloaded From Disc-Player.com Integra Manuals
Initial Settings menu—Continued
Options settings
Setting
Parental Lock
DVD Playback Mode
SACD Playback
Option
–
See “Parental Lock” on page 47.
DVD-Audio
All material on a DVD-Audio disc is playable.
DVD-Video
Only the DVD-Video part of a DVD-Audio disc is playable.
2ch Area
Selects the 2 channel (strereo) SACD audio area of the disc
for playback.
Multi-ch Area
Selects the multi-channel SACD audio area of the disc for
playback.
CD Area
Selects the standard CD audio area of an SACD/CD hybrid
disc for playback.
Stereo
Downmixes DTS for 2 channel output to regular stereo. (See
also “DTS Downmix” on page 49.)
Lt/Rt
Downmixes DTS for 2 channel output to be compatible with
Dolby Surround matrix decoders. (See also “DTS Downmix”
on page 49.)
Display
Selects to display a DivX VOD registration code.
DTS Downmix
DivX VOD
(not North American
model)
What it means
Speakers settings
Setting
Option
2 Channel
Audio Output Mode
Speaker Distance
Speaker Installation
What it means
The player outputs analog audio in stereo only. See also
“Audio Output Mode” on page 49.
5.1 Channel
The player outputs 5.1 channel analog audio. See also “Audio
Output Mode” on page 49.
–
Specify the distance of your speakers from your listening position. See also “Speaker Distance” on page 50.
–
Downloaded From Disc-Player.com Integra Manuals
Specify the number and size of speakers in your system. See
also “Speaker Installation” on page 49.
45
Initial Settings menu—Continued
About the audio output settings
The table below shows how the audio settings you make in the Initial Settings menu (see page 43) affect the output from
the 2 channel and the 5.1 channel analog outputs, and from the digital outputs with various types of disc.
Disc audio format
Player setting
2 Ch
DVD
Dolby Digital
Front L/R analog outputs*1
2ch downmix
Left / Right
Dolby Digital
Left / Right
–
Left / Right
Left / Right
2ch downmix
–
2ch downmix
DTS
Left / Right
MPEG
2ch downmix*5
2ch downmix*5
2 Ch / 5.1 Ch
Left / Right
Linear PCM
2 Ch / 5.1 Ch
2 Ch
5.1 Ch
Front L / R
2 Ch
Left / Right
DVD-RW
(VR mode)
Super Audio CD
CD
DTS CD
Video CD
–
–
Dolby Digital
karaoke
DVD-Audio
Bitstream*3
Dolby Digital
Front L / R
MPEG
Digital outputs
PCM convert*2
2ch downmix
5.1 Ch
DTS
Surround L/R
Center, LFE,
outputs*1
5.1 Ch
Front L / R
2 Ch
2ch downmix*4
5.1 Ch
Front L / R
2 Ch / 5.1 Ch
Left / Right*6
2 Ch
2ch downmix
Surround L/R,
Center, LFE
Surround L/R,
Center, LFE
–
Surround L/R,
Center, LFE
–
Surround L/R,
Center, LFE
–
–
Left / Right
–
Dolby Digital
MPEG or PCM
–
Surround L/R,
Center, LFE
5.1 Ch
Front L / R
2 Ch / 5.1 Ch
Left / Right
–
2 Ch
2ch downmix
–
5.1 Ch
Front L / R
2 Ch / 5.1 Ch
Left / Right
Surround L/R,
Center, LFE
–
–
–
Left / Right
Left / Right
2ch downmix
DTS
Left / Right
Left / Right
*1 When Audio Output Mode is set to 2 Channel, the AUDIO OUT (5.1ch) FRONT L/R jacks act as a second pair of stereo audio
outputs.
*2 Dolby Digital > PCM, MPEG > PCM or DTS > PCM setting (page 43)
*3 Dolby Digital, MPEG or DTS setting (page 43)
*4 Discs that prohibit downmixing will be output as 5.1 channel even if 2 Channel is selected as the Audio Output Mode setting (see
page 49).
*5 Discs that prohibit downmixing also mute the digital output.
*6 When Audio Output Mode is set to 5.1 Channel, mono sources are heard from the center speaker only.
46
Downloaded From Disc-Player.com Integra Manuals
Initial Settings menu—Continued
Parental Lock
Changing your password
• Default level: Off; Default password: none; Default
Country code: us (2119)
To give you some control over what your children watch
on your DPS-6.5, some DVD-Video discs feature a
Parental Lock level. If your player is set to a lower level
than the disc, the disc won’t play.
Some discs also support the Country Code feature. The
player does not play certain scenes on these discs,
depending on the Country Code you set.
Notes:
• Not all discs use Parental Lock, and will play without
requiring the password first.
• If you forget your password, you’ll need to reset the
player to register a new password. (see page 52)
To change your password, confirm your existing password then enter a new one.
1
Select “Password Change”.
2
Use the number buttons to enter
your existing password, then
press Enter.
Enter
3
Enter a new password and press
Enter.
This registers the new password and you
will return to the Options menu screen.
Enter
Registering a new password
You must register a password before you can change the
Parental Lock level or enter a Country code.
1
Setting/changing the Parental Lock
Select “Password”.
Initial Settings
Digital Audio Out
Video Output
Parental Lock
DVD Playback Mode
Password
Level Change
Language
Display
Options
SACD Playback
DTS Downmix
Country Code
1
Select “Level Change”.
2
Use number buttons to enter your
password, then press Enter.
1
2
3
4
5
6
7
8
9
Speakers
2
1
2
3
4
5
6
7
8
9
Use the number buttons to enter a
4-digit password.
The numbers you enter show up as asterisks (*) on-screen.
0
3
Enter
0
3
Enter
Press Enter to register the password.
You will return to the Options menu
screen.
Downloaded From Disc-Player.com Integra Manuals
Select a new level and press Enter.
• Press
(cursor left) repeatedly to
lock more levels (more discs will
require the password); press
(cursor right) to unlock levels. You can’t
lock level 1.
This sets the new level and you will
return to the Options menu screen.
47
Initial Settings menu—Continued
Setting/changing the Country code
You can find the Country code list in the adjacent column.
1
Select “Country Code”.
2
Use number buttons to enter your
password, then press Enter.
Country
Country code
Country code
letter
Argentina
0118
ar
Australia
0121
au
Austria
0120
at
Belgium
0205
be
Brazil
0218
br
1
2
3
Canada
0301
ca
4
5
6
Chile
0312
cl
7
8
9
China
0314
cn
Denmark
0411
dk
Finland
0609
fi
France
0618
fr
Germany
0405
de
Hong Kong
0811
hk
India
0914
in
Indonesia
0904
id
Italy
0920
it
Japan
1016
jp
0
3
Enter
Select a Country code and press
Enter.
There are two ways you can do this:
• Select by code letter: Use / (cursor up/down) to change the Country
code.
• Select by code number: Press
(cursor right) then use the number buttons
to enter the 4-digit Country code.
The new Country code is set and you will
return to the Options menu screen. Note
that the new Country code doesn’t take
effect until the next disc is loaded (or the
current disc is reloaded).
48
Country code list
Downloaded From Disc-Player.com Integra Manuals
Korea, Republic of
1118
kr
Malaysia
1325
my
Mexico
1324
mx
Netherlands
1412
nl
New Zealand
1426
nz
Norway
1415
no
Pakistan
1611
pk
Philippines
1608
ph
Portugal
1620
pt
Russian Federation
1821
ru
Singapore
1907
sg
Spain
0519
es
Sweden
1905
se
Switzerland
0308
ch
Taiwan
2023
tw
Thailand
2008
th
United Kingdom
0702
gb
USA
2119
us
Initial Settings menu—Continued
DTS Downmix
Speaker Installation
Default setting: STEREO
Default settings: L/R: Large, C: Large, LS/
RS: Large, SW: On
Initial Settings
Digital Audio Out
Parental Lock
STEREO
Video Output
Language
DVD Playback Mode
SACD Playback
Lt/Rt
Display
DTS Downmix
Options
Speakers
DivX VOD
You only need to make this setting if you connected this
player to your amplifier using the 5.1 channel analog
outputs.
This setting does not affect digital audio output.
Initial Settings
If you’ve selected DTS > PCM in DTS Out on page 43
or 2 Channel in Audio Output Mode below section, you
can choose the way the signal is downmixed to PCM
audio. Stereo will downmix the DTS signal to 2-channel
stereo, whereas Lt/Rt will downmix to a 2-channel signal
compatible with Dolby surround matrix decoders. (This
allows you to hear surround sound if your AV receiver or
amplifier has Dolby Pro Logic capability.)
Digital Audio Out
Video Output
Language
Display
Options
Speakers
Audio Output Mode
Speaker Distance
Speaker Installation
5.1 Channel
Use the Speaker Installation screen to tell the player
what kinds of speakers you have connected.
1
Audio Output Mode
Enter
Default setting: 2 Channel
Use the / (cursor up/down)
buttons to select a speaker.
• The L and R, and RS and LS speakers
are paired; you can’t set them differently.
Initial Settings
Initial Settings
Digital Audio Out
Video Output
Audio Output Mode
Speaker Distance
Language
Display
Options
Speaker Installation
Digital Audio Out
Video Output
Language
Display
Options
Speakers
2 Channel
5.1 Channel
Speakers
If you connected this player to your amplifier using the
5.1 channel analog outputs (front, surround, center and
subwoofer outs), set this to 5.1 Channel; if you connected only the stereo outs, set to 2 Channel.
Notes:
• Even if you set Audio Output Mode to 5.1 Channel,
you’ll only get sound from all speakers when playing
a 5.1 channel multichannel disc.
• When set to 5.1 Channel, only the front left/right
channels are output from the AUDIO OUT (2ch)
jacks. Change to 2 Channel if you want to listen to
downmixed stereo audio (for example, because you
are listening through the TV’s built-in speakers).
• When set to 5.1 Channel there is no digital output
when playing DVD-Audio.
• If you set to 2 Channel, Dolby Digital, DTS and
MPEG audio is mixed down to two channels so you
still hear all the audio recorded on the disc. With DTS
encoded audio, you can choose how the signal is
downmixed to PCM audio. See DTS Downmix above
to change the downmix setting.
• Some DVD-Audio discs don’t allow downmixing of
audio. These discs always output multi-channel audio
regardless of the setting made here.
Downloaded From Disc-Player.com Integra Manuals
L
C
R
RS
LS
SW
Large
Large
Large
Large
Large
On
2
Press
(cursor right) to modify
the selected speaker.
3
Use the / (cursor up/down)
buttons to change the current setting.
• You can see the effect of your changes
in the room graphic on the right of the
screen.
• Except for the subwoofer, you can set
speaker size to Large or Small. If the
main speaker cone in the speaker is
12cm or more, set to Large, otherwise
set to Small (or Off if you don’t have
that speaker).
• If you set the front L and R speakers to
Small, the center and surround speakers are automatically set to Small and
the subwoofer to On.
• The subwoofer can only be set to On or
Off.
Enter
49
Initial Settings menu—Continued
4
• Surround left/right (LS/RS) speakers
can be set from – 20 ft (–6.0 m) to 0 ft
(0 m) relative to the front left/right
speakers.
• You can’t set the subwoofer (SW) distance.
Press
(cursor left) to go back to
the speaker list if you want to modify another speaker, or press Enter
to exit the Speaker Installation
screen.
4
Speaker Distance
You only need to make this setting if you connected this
player to your amplifier using the 5.1 channel analog
outputs.
These settings do not affect any digital audio output.
To get the best surround sound from your system, you
should set up the speaker distances from your listening
position.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
1
Enter
Audio Output Mode
Speaker Distance
Speaker Installation
5.1 Channel
Use the / (cursor up/down) to
select a speaker.
• The L and R speakers are paired; you
can’t set them differently.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
3.0m
3.0m
3.0m
3.0m
3.0m
2
Press
(cursor right) to change
the speaker distance for the highlighted speaker.
3
Use the / (cursor up/down) to
change the distance.
• When you change the distance settings
of the front left (L) or front right (R)
speakers, all the other speaker distances change relative to it.
• Front left/right (L/R) speaker distances can be set from 1 ft (30 cm) to
10 ft (9 m) in 1 ft (30 cm) increments.
• The center speaker (C) can be set from
–7 ft (–2.1 m) to 0 ft (0 m) relative to
the front left/right speakers.
Enter
50
L
C
R
RS
LS
Downloaded From Disc-Player.com Integra Manuals
Press
(cursor left) to go back to
the speaker list if you want to modify another speaker, or press Enter
to exit the Speaker Distance
screen.
Note:
• During playback of SACD and MPEG-audio DVDVideo discs, the effective C, LS and RS speaker distance settings are –3 ft (–0.9m) to 0 ft (0 m) relative to
the front left/right speakers.
Additional information
Screen sizes and disc formats
DVD-Video discs come in several different screen aspect
ratios, ranging from TV programs, which are generally
4:3, to Cinema- Scope widescreen movies, with an
aspect ratio of up to about 7:3.
Televisions, too, come in different aspect ratios; “standard” 4:3 and widescreen 16:9.
Widescreen TV users
If you have a widescreen TV, the TV Screen setting
(page 43) of this player should be set to “16:9 (Wide)”.
When you watch discs recorded in 4:3 format, you can
use the TV controls to select how the picture is presented. Your TV may offer various zoom and stretch
options; see the instructions that came with your TV for
details.
Please note that some movie aspect ratios are wider than
16:9, so even though you have a widescreen TV, these
discs will still play in a “letter box” style with black bars
at the top and bottom of the screen.
Setting the TV system (Not North
American model)
The default setting of this player is AUTO, and unless
you notice that the picture is distorted when playing
some discs, you should leave it set to AUTO. If you experience picture distortion with some discs, set the TV system to match your country or region’s system. Doing
this, however, may restrict the kinds of disc you can
watch. The table below shows what kinds of disc are
compatible with each setting (AUTO, PAL and NTSC).
Standby/On
Standby/On
Open /Close
Progressive
Display
Play Mode
Dimmer
Clear
Pause
Stop
Play
Standby
DPS-6.5
1
If the player is on, press Standby/
On to switch it to standby.
Standby/On
Standard TV users
If you have a standard TV, the “TV Screen” setting
(page 43) of this player should be set to “4:3 (Letter
Box)” or “4:3 (Pan&Scan)”, depending on which you
prefer.
Set to “4:3 (Letter Box)”, widescreen discs are shown
with black bars top and bottom.
2
Using the front panel controls,
hold down
then press
Standby/On to switch the TV system.
The TV system changes as follows:
• AUTO → NTSC
• NTSC → PAL
• PAL → AUTO
Standby/On
Set to “4:3 (Pan&Scan)”, widescreen discs are shown
with the left and right sides cropped.
Although the picture looks larger, you don’t actually see
the whole picture.
Note:
• You have to switch the player into standby (press
Standby/On) before each change.
Disc
Type
Format
NTSC
PAL
AUTO
DVD/
Super
VCD
NTSC
NTSC
PAL
NTSC
PAL
NTSC
PAL
PAL
NTSC
NTSC
PAL
NTSC
PAL
NTSC
PAL
PAL
NTSC
PAL
NTSC or
PAL
Video CD
Please note that many widescreen discs override the
player’s settings so that the disc is shown in letter box
format regardless of the setting.
Note:
• Using the “16:9 (Wide)” setting with a standard 4:3
TV, or either of the “4:3” settings with a widescreen
TV, will result in a distorted picture.
Downloaded From Disc-Player.com Integra Manuals
Player setting
CD/SACD
no disc
–
51
Additional information—Continued
Resetting the player
DVD-Video regions
Use this procedure to reset all the player’s settings to the
factory default.
1
Switch the player into standby.
2
Using the front panel buttons, hold
down the Stop ( ) button and
press Standby/On to switch the
player back on.
All the player’s settings are now reset.
Stop
All DVD-Video discs carry a region mark on the case
somewhere that indicates which region(s) of the world
the disc is compatible with. Your DPS-6.5 also has a
region mark, which you can find on the rear panel. Discs
from incompatible regions will not play in this player.
Discs marked “ALL” will play in any player.
The diagram below shows the various DVD regions of
the world.
1
Standby/On
5
2
6
2
1
3
4
5
2
4
Titles, chapters and tracks
DVD discs are generally divided into one or more titles.
Titles may be further subdivided into chapters.
Title 1
Title 2
Title 3
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 1 Chapter 2
Selecting languages using the
language code list
Some of the language options (such as “DVD Language”
in the Setup Navigator) allow you to set your prefered
language from any of the 136 languages listed in the language code list on page 53.
SACDs, CDs and Video CDs are divided into tracks.
On
Standby
1
2
3
4
5
6
7
8
9
0
Clear
Open/
Close
Play Mode
Display
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Dimmer
Top Menu
Track 1
Track 2
Track 3
Folder B
Folder C
Track 1
Track 1
Setup
Audio
Angle Subtitle Zoom
Play
Down
Track 2
/
Return
Stop
Folder A
Menu
Enter
.jpg
.jpg
.mp3
.mp3
.mp3
.mp3
CD-ROMs contain folders and files. MP3 and WMA
files are referred to as tracks. Folders may contain further
folders.
/ /
Pause
Up
1
Select “Other Language”.
2
Use the / (cursor left/right)
buttons to select either a code letter or a code number.
Enter
3
Enter
52
Downloaded From Disc-Player.com Integra Manuals
Use the / (cursor up/down)
buttons to select a code letter or a
code number.
See “Language code list” on page 53 for
a complete list of languages and codes.
Additional information—Continued
Language code list
Language
Language
code
letter
Language
code
Language
Language
code
letter
Language
code
Language
Language
code
letter
Language
code
Japanese
ja
1001
Hungarian
hu
0821
Sangho
sg
1907
English
en
0514
Armenian
hy
0825
sh
1908
French
fr
0618
Interlingua
ia
0901
SerboCroatian
German
de
0405
Interlingue
ie
0905
Italian
it
0920
Inupiak
ik
0911
Spanish
es
0519
Indonesian
in
0914
Chinese
zh
2608
Icelandic
is
0919
Dutch
nl
1412
Hebrew
iw
0923
Portuguese
pt
1620
Yiddish
ji
1009
Swedish
sv
1922
Javanese
jw
1023
Russian
ru
1821
Georgian
ka
1101
Korean
ko
1115
Kazakh
kk
1111
Greek
el
0512
Greenlandic
kl
1112
Afar
aa
0101
Cambodian
km
1113
Abkhazian
ab
0102
Kannada
kn
1114
Afrikaans
af
0106
Kashmiri
ks
1119
Amharic
am
0113
Kurdish
ku
1121
Arabic
ar
0118
Kirghiz
ky
1125
Assamese
as
0119
Latin
la
1201
Aymara
Azerbaijani
ay
az
0125
0126
Lingala
Laothian
ln
lo
1214
1215
Bashkir
ba
0201
Lithuanian
lt
1220
Byelorussian
be
0205
Latvian
lv
1222
Bulgarian
bg
0207
Malagasy
mg
1307
Bihari
bh
0208
Maori
mi
1309
Bislama
bi
0209
Macedonian
mk
1311
Bengali
bn
0214
Malayalam
ml
1312
Tibetan
bo
0215
Mongolian
mn
1314
Breton
br
0218
Moldavian
mo
1315
Catalan
ca
0301
Marathi
mr
1318
Corsican
co
0315
Malay
ms
Czech
cs
0319
Maltese
mt
1320
Welsh
cy
0325
Burmese
my
1325
Danish
da
0401
Nauru
na
1401
1319
Bhutani
dz
0426
Nepali
ne
1405
Esperanto
eo
0515
Norwegian
no
1415
Estonian
et
0520
Occitan
oc
Basque
eu
0521
Oromo
om
1513
Persian
fa
0601
Oriya
or
1518
Finnish
fi
0609
Panjabi
pa
1601
Fiji
fj
0610
Polish
pl
1612
Faroese
fo
0615
1619
fy
0625
Pashto,Push
to
ps
Frisian
Irish
ga
0701
Quechua
qu
1721
RhaetoRomance
rm
1813
Kirundi
rn
1814
Romanian
ro
1815
Kinyarwanda
rw
1823
Sanskrit
sa
1901
Sindhi
sd
1904
Scots-Gaelic
gd
0704
Galician
gl
0712
Guarani
gn
0714
Gujarati
gu
0721
Hausa
ha
0801
Hindi
hi
0809
Croatian
hr
0818
Downloaded From Disc-Player.com Integra Manuals
1503
Sinhalese
si
1909
Slovak
sk
1911
sl
1912
Slovenian
Samoan
sm
1913
Shona
sn
1914
Somali
so
1915
Albanian
sq
1917
Serbian
sr
1918
Siswati
ss
1919
Sesotho
st
1920
Sundanese
su
1921
Swahili
sw
1923
Tamil
ta
2001
Telugu
te
2005
Tajik
tg
2007
Thai
th
2008
Tigrinya
ti
2009
Turkmen
tk
2011
Tagalog
tl
2012
Setswana
tn
2014
Tonga
to
2015
Turkish
tr
2018
Tsonga
ts
2019
Tatar
tt
2020
Twi
tw
2023
Ukrainian
uk
2111
Urdu
ur
2118
Uzbek
uz
2126
Vietnamese
vi
2209
Volapük
vo
2215
Wolof
wo
2315
Xhosa
xh
2408
Yoruba
yo
2515
Zulu
zu
2621
53
Using the Remote controller with Other Brand’s
TVs
Learning a pre-programming code
On
Standby
1
2
3
4
5
6
7
8
9
0
Clear
5
Press some operation buttons for
the component that you want to
operate to check if the system
operates properly.
If the system operates properly, the code
is correct. If the component does not
operate properly, return to step 2.
Open/
Close
Play Mode
Display
Numbers
Dimmer
Top Menu
Menu
/
/ /
Enter
Return
Setup
Audio
Angle Subtitle Zoom
Stop
Play
Down
Enter
Pause
Up
T V Control
T V/ Video Channel
On/
Standby
On/
Standby
Volume
TV Control
RC - 583DV
Notes:
• With some brand’s components, some buttons may not
work correctly.
• If more than one code is given in the table, try the code
one by one until you reach the code for your component (i.e. if the first code does not work, then try the
next).
• The code can be retained by changing the batteries
within 1 minute. If the code is lost, store the pre-programming code again.
Controlling a TV
1 On/
Press On/Standby to turn on the
device.
2
Press the desired operation button.
+
: Changes the TV channel upward.
–
: Changes the TV channel downward.
: Increases the TV volume.
: Decrease the TV volume.
Tv/Video :
Switches the TV/VCR inputs.
Standby
You can make RC-583DV remote controller to operate a
TV from other brand than Integra by storing the pre-programming code of the brand in the RC-583DV.
1
Find the 3-digit number for the
brand name of the component that
you want to operate in the table on
page 55.
2
Turn on the TV that you want to
operate.
3
While holding down the On/
Standby on the RC-583DV that you
want to program, press Enter, and
then release both buttons.
(Make sure you press On/Standby before
Enter.)
On/
Standby
Enter
4
1
2
3
4
5
6
7
8
9
Within 10 seconds, enter the 3digit code number.
0
54
Downloaded From Disc-Player.com Integra Manuals
Channel
Volume
T V/Video
Using the Remote controller with Other Brand’s TVs—Continued
Pre-programming Code List
Brand
Brand
Code
Code
SAMSUNG
202, 203, 204, 205, 206, 207, 208
209, 210, 211, 212
AIWA
100. 101
SANYO
AKAI
102, 103, 104
SCHNEIDER
103
AUDIO SONIC
105
SEARS
213
BELL&HOWELL
106
SELECO
214, 215
BLAUPUNKT
107
SHARP
216, 217
BRIONVEGA
108, 109
SONY
218, 219, 220, 221, 222, 223
CENTURION
110
SYMPHONIC
224, 225
COLTINA
111, 112, 113
TELEFUNKEN
201, 226, 227
CORONAD
114
THOMSON
228
CROWN
115, 116
TOSHIBA
213, 229
DAEWOO
117, 118, 119, 120, 121
UNIVERSUM
230
DUAL
122
ZENITH
231, 232
EMERSON
123, 124, 125, 126, 127
FENNER
128, 129
FERGUSON
130, 131
FISHER
132
FUNAI
133, 134, 135
FUJITSU GENERAL
136, 137,138
GE • PANA
139, 140
GE • RCA
141
GOLD STAR
142, 143
GOODMANS
144
GRUNDIG
145, 146
HITACHI
147, 148, 149, 150
HYPER
151
INNO-HIT
152
IRRADIO
103
JVC
153, 154, 155, 156, 157
KENDO
158
KTV
159, 160
LUXOR
161
MAGNAVOX
162, 163
MARANTZ
164
MARK
165
MATSUI
166, 167, 168, 169
MITSUBISHI
170, 171, 172, 173
MIVAR
174, 175
NEC
176, 177
NOKIA
178, 179, 180, 181
NOKIA OCEANIC
181
NORDMENDE
182, 183
OKANO
152
ORION
184, 185, 186
PANASONIC
187, 188, 189, 190
PHILIPS
162, 191, 152
PIONEER
192, 193
PROSCAN
194
QUASAR
195
RADIOSHARK
196
RCA
141, 197, 198, 110, 199, 200
SABA
201, 182, 183
Downloaded From Disc-Player.com Integra Manuals
55
DivX Titles
Integra has tested and verified on the DPS-6.5 the correct playback of DivX titles that consist of one of the following
combinations of video and audio data.
Video
56
Audio
frame rate
audio code
sampling
frequency
5.1
23.98fps
MPEG1-LayerIII
44.10kHz
2ch
128kbps
DivX
5.1
23.98fps
MPEG1-LayerIII
44.10kHz
2ch
128kbps
DivX
5.1
23.98fps
MPEG1-LayerIII
44.10kHz
2ch
128kbps
24Bit
DivX
5.1
25.00fps
MPEG1-LayerIII
48.00kHz
2ch
189kbps
720x576
24Bit
DivX
5.1
25.00fps
MPEG1-LayerIII
48.00kHz
2ch
189kbps
720x320
24Bit
DivX
5.1
23.98fps
MPEG1-LayerIII
48.00kHz
2ch
320kbps
720x320
24Bit
DivX
5.1
23.98fps
MPEG1-LayerIII
48.00kHz
2ch
320kbps
640x272
24Bit
DivX
5.0.5
23.98fps
MPEG1-LayerIII
11.03kHz
2ch
32kbps
640x272
24Bit
DivX
5.0.5
23.98fps
MPEG1-LayerIII
22.05kHz
2ch
64kbps
640x272
24Bit
DivX
5.0.5
23.98fps
MPEG1-LayerIII
32.00kHz
2ch
83kbps
200x100
24Bit
DivX
5.0.5
23.98fps
MPEG1-LayerIII
44.10kHz
2ch
128kbps
320x240
24Bit
DivX
5.0.5
23.98fps
MPEG1-LayerIII
44.10kHz
2ch
128kbps
352x288
24Bit
DivX
5.0.5
23.98fps
MPEG1-LayerIII
44.10kHz
2ch
128kbps
484x264
24Bit
DivX
5.0.5
23.98fps
MPEG1-LayerIII
44.10kHz
2ch
128kbps
484x264
24Bit
DivX
4.1.2
23.98fps
MPEG1-LayerIII
44.10kHz
2ch
128kbps
512x288
24Bit
DivX
5.0.5
23.98fps
MPEG1-LayerIII
44.10kHz
2ch
128kbps
576x320
24Bit
DivX
5.0.5
23.98fps
MPEG1-LayerIII
44.10kHz
2ch
128kbps
640x272
24Bit
DivX
5.0.5
23.98fps
MPEG1-LayerIII
44.10kHz
2ch
128kbps
640x304
24Bit
DivX
5.0.5
23.98fps
MPEG1-LayerIII
44.10kHz
2ch
128kbps
640x304
24Bit
DivX
5.0.2
23.98fps
MPEG1-LayerIII
44.10kHz
2ch
128kbps
640x304
16Bit
DivX
4.1.2
23.98fps
MPEG1-LayerIII
44.10kHz
2ch
128kbps
640x352
24Bit
DivX
5.0.5
23.98fps
MPEG1-LayerIII
44.10kHz
2ch
128kbps
640x352
24Bit
DivX
5.0.5
23.98fps
MPEG1-LayerIII
44.10kHz
2ch
128kbps
640x352
24Bit
DivX
5.0.5
23.98fps
MPEG1-LayerIII
44.10kHz
2ch
128kbps
640x352
24Bit
DivX
5.0.5
23.98fps
MPEG1-LayerIII
44.10kHz
2ch
128kbps
640x352
24Bit
DivX
5.0.5
23.98fps
MPEG1-LayerIII
44.10kHz
2ch
128kbps
640x352
24Bit
DivX
5.0.5
23.98fps
MPEG1-LayerIII
44.10kHz
2ch
128kbps
640x352
24Bit
DivX
5.0.5
23.98fps
MPEG1-LayerIII
44.10kHz
2ch
128kbps
640x352
24Bit
DivX
5.0.5
23.98fps
MPEG1-LayerIII
44.10kHz
2ch
128kbps
640x480
24Bit
DivX
5.0.3
11.99fps
MPEG1-LayerIII
44.10kHz
2ch
128kbps
640x480
24Bit
DivX
5.0.3
7.99fps
MPEG1-LayerIII
44.10kHz
2ch
128kbps
640x272
24Bit
DivX
5.0.5
23.98fps
MPEG1-LayerIII
48.00kHz
1ch
64kbps
640x272
24Bit
DivX
5.0.5
23.98fps
MPEG1-LayerIII
48.00kHz
2ch
115kbps
640x352
24Bit
DivX
5.0.5
23.98fps
MPEG1-LayerIII
48.00kHz
2ch
129kbps
640x352
24Bit
DivX
5.0.5
23.98fps
MPEG1-LayerIII
48.00kHz
2ch
129kbps
640x272
24Bit
DivX
5.0.5
23.98fps
MPEG1-LayerIII
48.00kHz
2ch
320kbps
resolution
color
code
640x272
24Bit
DivX
640x304
24Bit
640x480
24Bit
720x576
Downloaded From Disc-Player.com Integra Manuals
channel bit rate
DivX Titles—Continued
Video
Audio
resolution
color
640x272
24Bit
DivX
640x352
24Bit
DivX
frame rate
audio code
sampling
frequency
5.0.5
23.98fps
MPEG1Audio
48.00kHz
2ch
192kbps
5.0.5
23.98fps
Dolby AC-3
48.00kHz
5ch
448kbps
2ch
1536kbps
code
channel bit rate
640x352
24Bit
DivX
5.0.5
23.98fps
PCM
48.00kHz
16Bit
640x304
24Bit
DivX
3.11
23.98fps
MPEG1-LayerIII
44.10kHz
2ch
127kbps
320x240
24Bit
DivX
3.11
23.98fps
MPEG1-LayerIII
44.10kHz
2ch
128kbps
484x264
24Bit
DivX
3.11
23.98fps
MPEG1-LayerIII
44.10kHz
2ch
128kbps
640x304
24Bit
DivX
3.11
23.98fps
MPEG1-LayerIII
44.10kHz
2ch
128kbps
640x352
24Bit
DivX
3.11
23.98fps
MPEG1-LayerIII
44.10kHz
2ch
160kbps
640x352
24Bit
DivX
3.11
23.98fps
MPEG1-LayerIII
48.00kHz
2ch
320kbps
640x352
24Bit
DivX
3.11
23.98fps
MPEG1-LayerIII
48.00kHz
2ch
320kbps
720x480
24Bit
DivX
3.11
29.97fps
No Sound
720x480
24Bit
DivX
5.1
29.97fps
No Sound
720x480
24Bit
DivX
5.1
29.97fps
No Sound
720x480
24Bit
DivX
5.1
29.97fps
No Sound
720x480
24Bit
DivX
5.1
29.97fps
No Sound
720x480
24Bit
DivX
4.1.2
29.97fps
No Sound
720x480
24Bit
DivX
5.0.5
29.97fps
No Sound
720x480
24Bit
DivX
5.0.5
29.97fps
No Sound
720x480
24Bit
DivX
5.0.5
29.97fps
No Sound
720x480
24Bit
DivX
5.0.5
29.97fps
No Sound
720x480
24Bit
DivX
5.0.5
29.97fps
No Sound
720x480
24Bit
DivX
5.0.5
29.97fps
No Sound
Note:
• Set the interleave to five seconds or shorter.
Downloaded From Disc-Player.com Integra Manuals
57
Glossary
Analog audio
MPEG audio
Direct representation of sound by an electrical signal.
See also Digital audio.
An audio format used on Video CD/ Super VCDs and
some DVD discs.
Aspect ratio
Packed PCM (DVD-Audio only)
The width of a TV screen relative to its height. Conventional TVs are 4:3; widescreen models are 16:9.
A lossless compression system that enables more PCM
audio to be stored on a DVD-Audio disc than would otherwise be possible.
Bonus Group (DVD-Audio only)
An “extra” group on some DVD-Audio discs that
requires a key number to access.
Browsable pictures (DVD-Audio only)
A feature of some DVD-Audio discs in which the user
can browse still pictures recorded on the disc as the audio
is played. See also Slideshow.
Digital audio
Indirect representation of sound using numbers. See also
Sampling frequency and Analog audio.
Dolby Digital
A multi-channel audio encoding system
developed by Dolby Laboratories that enables far more
audio to be stored on a disc than PCM encoding. See also
PCM (Pulse Code Modulation).
DRM
DRM (Digital Rights Management) copy protection is a
technology designed to prevent unauthorized copying by
restricting playback, etc. of material on devices other the
PC (or other WMA recording equipment) used to record
it. For detailed information, please see the instruction
manuals or help files that came with your PC (or other
WMA recording equipment) and/or software.
DTS
A multi-channel audio encoding system
developed by Digital Theater Systems that
enables far more audio to be stored on a disc than PCM
encoding. See also PCM (Pulse Code Modulation).
EXIF (Exchangeable Image File)
A file format developed by Fuji Photo Film for digital
still cameras. Digital cameras from various manuafcturers use this compressed file format which carries date,
time and thumbnail information, as well as the picture
data.
File extension
A tag added to the end of a filename to indicate the type
of file. For example, “.mp3” indicates an MP3 file.
ISO 9660 format
International standard for the volume and file structure
of CD-ROM discs.
JPEG
A standard file format used for still images. JPEG files
are identified by the file extension “.jpg”.
MP3
MP3 (MPEG1 audio layer 3) is a compressed stereo
audio file format.
Files are recognized by their file extension “.mp3”.
58
Downloaded From Disc-Player.com Integra Manuals
PBC (PlayBack Control)
A system of navigating a Video CD/ Super VCD through
on-screen menus recorded onto the disc.
PCM (Pulse Code Modulation)
Digital audio encoding system found on CDs. Good
quality, but requires a lot of data compared to Dolby Digital, DTS and MPEG encoded audio. See also Digital
audio.
Progressive scan video
All the lines that make up a video picture are updated in
one pass (compared to interlace which takes two passes
to update the whole picture).
Regions (DVD-Video only)
These associate DVD-Video discs and players with particular areas of the world. See DVD-Video regions on
page 52 for more information.
Sampling frequency
The rate at which sound is measured to be turned into
digital audio data. The higher the rate, the better the
sound quality. CD is 44.1 kHz; DVD can be up to 96
kHz. See also Digital audio.
Super Audio CD (SACD)
Super Audio CD is a high quality audio disc format that
can accommodate high sampling rate stereo and multichannel audio, as well as conventional CD audio all on
the same disc.
WMA
WMA is short for Windows Media Audio and refers to
an audio compression technology developed by
Microsoft Corporation. Files are recognized by their file
extension “.wma”. Microsoft, Windows Media, and the
Windows logo are trademarks, or registered trademarks
of Microsoft Corporation in the United States and/or
other countries.
FAQ
My DPS-6.5 switches on but there is nothing displayed on my TV.
• Make sure that the TV is set to the correct video input (not a TV channel). For example, if you connected this player
to the VIDEO 1 inputs on your TV, switch your TV to VIDEO 1.
After I load a DVD disc, it ejects automatically after a few seconds!
• Most likely, the disc is the wrong region for your player. The region number should be printed on the disc; check it
against the region number of the player (which you can find on the rear panel). See also “DVD-Video regions” on
page 52. If the region number is OK, it may be that the disc is damaged or dirty. Clean the disc and look for signs of
damage. See also “Handling Discs” on page 10.
Why won’t the disc I loaded play?
• First check that you loaded the disc the right way up (label side up), and that it’s clean and undamaged. See “Cleaning
Discs” on page 10 for information on cleaning discs.
If a disc loaded correctly won’t play, it’s probably an incompatible format or disc type, such as DVD-ROM. See
“Supported Discs” on page 9 for more on disc compatibility.
I have a widescreen TV so why are there black bars at the top and bottom of the screen when I play
some discs?
• Some movie formats are such that even when played on a widescreen TV, black bars are necessary at the top and
bottom of the screen. This is not a malfunction.
I have a standard (4:3) TV and set the player to show widescreen DVDs in pan & scan format, so why
do I still get black bars top and bottom with some discs?
• Some discs override the display preferences of the player, so even if you have 4:3 (Pan & Scan) selected, those discs
will still be shown in letter box format. This is not a malfunction.
My AV receiver is definitely compatible with 96/88.2kHz Linear PCM audio, but it doesn’t seem to work
with this player. What’s wrong?
• For digital copy-protection purposes, some 96/88.2kHz DVD discs only output digital audio downsampled to 48/
44.1kHz. This is not a malfunction. To fully take advantage of the high sampling rate audio, connect the analog audio
outputs to your amplifier/receiver.
Why can’t I hear SACD audio through the digital outputs?
• SACD audio is only available through the analog outputs. This is not a malfunction. Some DVD-Audio discs too only
output audio through the analog outputs.
Is it better to listen to DVD-Audio discs through the analog outputs?
• Some DVD-Audio discs do not output anything through the digital outputs, and multichannel discs are downmixed
to stereo for the digital output. In addition, high sampling rate DVD-Audio discs (higher than 96kHz) automatically
downsample audio output from the digital outputs. Using the multichannel analog audio outputs for DVD-Audio have
none of these limitations.
My DVD-Audio disc starts playing, but then suddenly stops!
• The disc may have been illegally copied.
Downloaded From Disc-Player.com Integra Manuals
59
Troubleshooting
If you have any trouble using your DPS-6.5, check the following table for possible causes and remedies. If you still can’t
resolve the issue yourself, please contact your Integra dealer.
DPS-6.5
The disc won’t play or is automatically ejected after loading.
• Make sure the disc is free from dirt and dust and is not damaged (page 10).
• Make sure the disc is loaded with the label side face-up and aligned properly in the disc tray guide.
• Incompatible region number: If the region number on a DVD-Video disc does not match the number on the player,
the disc cannot be used (page 52).
• Condensation inside the player: Allow time for condensation to evaporate. Avoid using the player near an air-conditioning unit.
• Disc is loaded upside down: Reload the disc with the label side face up.
DVD-Audio playback stops.
• The disc may have been illegally copied.
Picture playback stops and the operation buttons cannot be used.
• Press Stop ( ) button, then start playback again Play ( ) button.
• Switch the power off once, unplug from the wall socket, then plug back in and switch on again using the front panel.
Standby/On button.
New settings made in the Setup screen menus while a disc is playing are ineffective.
• Some settings can be changed while a disc is playing, but are not effective until the disc is stopped then restarted:
Press Stop ( ) button, then startplayback again Play ( ) button.
Settings are canceled.
• When the power is cut due to power failure or by unplugging the power cord, settings will be canceled: Press. Standby/
On on the front panel to turn the player off. Wait for --GOOD BYE-- to disappear from the display, then unplug the
power cord.
No picture/No color.
• Incorrect video connections: Check that connections are correct and that plugs are inserted fully. Also check the video
cable for damage.
• TV/monitor or AV amplifier settings are incorrect: Check the instruction manual of the connected equipment.
• The video output is set to progressive but your TV/monitor is not compatible with progressive scan: See page 19 for
how to set to interlace.
Screen is stretched or aspect does not change.
• The TV Screen setting in the Initial Settings menu is incorrect. See page 51 for how to set it correctly for your TV/
monitor.
Picture disturbance during playback or the picture is dark.
• This player is compatible with Macro-Vision System copy guard. Some discs include a copy prevention signal, and
when this type of disc is played back, stripes etc., may appear on some sections of the picture depending on the TV.
This is not a malfunction.
• Due to the player’s copy protection circuits, connection of this device through a VCR or an AV selector may prevent
recording or cause picture problems. This is not a malfunction.
No audio, or audio is distorted.
• No audio is output during slow motion playback or when scanning discs other than audio CDs and SACDs.
• Some DVD discs do not output digital audio: Switch your amplifier to the player’s analog outputs.
• Check that the disc is free from dust and dirt, and that it is not damaged (page 10).
• Check that all interconnects are firmly inserted.
• Check that the plugs and terminals are free of dirt, oxide, etc. and clean if necessary. Also check the cable for damage.
• Make sure the player’s output is not connected to the amplifier’s phono (turntable) inputs.
• Check your amplifier/receiver’s settings (volume, input function, speaker settings, etc.).
60
Downloaded From Disc-Player.com Integra Manuals
Troubleshooting—Continued
The analog audio is OK, but there appears to be no digital audio signal.
• Make sure that the Digital Out setting is set to On (page 43).
• Check that the Dolby Digital, DTS and MPEG out settings (page 43) are suitable for your amplifier/receiver/check
the instruction manual that came with your amplifier/receiver.
• SACDs and some DVD-Audio discs do not output digital audio. Listen through the player’s analog audio outputs.
Noticeable difference in DVD and CD volume.
• This is due to differences in the audio format and is not a malfunction.
Cannot play multichannel audio
• Make sure that Audio Output Mode is set to 5.1 Channel (page 49).
• Check that the Dolby Digital, DTS and MPEG Out settings (page 43) are suitable for your amplifier/receiver—check
the instruction manual that came with your amplifier/receiver.
• DVD-Audio and SACDs do not output multichannel digital audio. Listen through the player’s analog outputs.
• Check that the settings in the Speaker Installation screen are correct (page 49).
• Check the audio options available from the disc menu.
Cannot listen to highsampling rate audio through the digital output.
• Make sure that Linear PCM Out is set to Downsample Off (page 43).
• As a copy-protection measure, some DVDs do not output 96kHz audio. In this case, even if set to Downsample Off,
the player automatically outputs the audio at 48 kHz. This is not a malfunction.
Cannot output 192kHz or 176.4kHz digital audio.
• The player does not output digital audio at these sampling rates. The digital output is automatically downsampled.
Cannot output 96kHz or 88.2kHz digital audio.
• Check that Linear PCM Out is set to Downsample Off (page 43).
• Some discs are digital copy protected and do not output high sampling rate digital audio. In this case the output is
automatically downsampled.
No DTS audio output.
• If this unit is connected to a non-DTS compatible amplifier or decoder using a digital audio cable, set DTS Out to
DTS > PCM (page 43). If you do not do this, noise will be output when you play a DTS disc.
• If this unit is connected to a DTS-compatible amplifier or decoder using a digital audio cable, check the amplifier
settings, and that the cable is properly connected.
Audio mix does not sound right or sounds incomplete (for example, inaudible dialog).
• Make sure that Audio Output Mode is set to 2 Channel if you’ve connected to the stereo inputs on your amplifier or
TV (page 49).
Downloaded From Disc-Player.com Integra Manuals
61
Troubleshooting—Continued
Remote Controller
Buttons on the DPS-6.5 work OK but those on the remote controller don’t?
• There are no batteries in the remote controller.
Install new batteries (page 11).
• The batteries are flat.
Replace with new batteries (page 11).
• The batteries are installed incorrectly.
Check the batteries and correct as necessary (page 11).
• You’re not pointing the remote controller at the DPS-6.5’s remote sensor.
Point the remote controller at the DPS-6.5’s remote sensor (page 11).
• You’re too far away from the DPS-6.5.
Use the remote controller closer to the DPS-6.5 (page 11). The remote controller has a range of approximately 16 ft
(5 meters).
• A strong light source is interfering with the DPS-6.5’s remote sensor.
Make sure that the DPS-6.5 is not subjected to direct sunshine or inverter-type fluorescent lights. Relocate if necessary.
• If the DPS-6.5 is installed in a cabinet with colored glass doors, the remote controller may not work reliably when the
doors are closed.
Open the doors, or use a cabinet without colored glass.
The DPS-6.5 contains a microcomputer for signal processing and control functions. In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely even that this should
happen, unplug the power cord from the wall outlet, wait at least five seconds, and then plug it back in again.
62
Downloaded From Disc-Player.com Integra Manuals
Specifications
Signal System
North American model: NTSC
Australian model: PAL/NTSC
Composite Video Output/Impedance
1.0 V (p-p)/75 Ω negative sync, RCA
S Video Output/Impedance
Y: 1.0 V (p-p)/75 Ω negative sync, 4-pin mini DIN
C: 0.286 V (p-p)/75 Ω
Component Video Output/Impedance
Y: 1.0 V (p-p)/75 Ω
PB/PR: 0.7 V (p-p)/75 Ω RCA/ phono
Component Video Frequency Response
5 Hz–50 MHz
Frequency response
DVD Audio
4 Hz–88 kHz (192 kHz)
DVD Linear Sound
4 Hz–44 kHz (96kHz)
4 Hz–22 kHz (48kHz)
Audio CD
4 Hz–20 kHz (44.1kHz)
S/N Ratio
106 dB
Audio Dynamic Range
96 dB
THD (Total Harmonic Distortion)
0.003 % (1kHz)
Wow and Flutter
Below threshold of measurability
Audio Output (Digital/Optical)
–22.5 dBm
Audio Output/Impedance (Digital/Coaxial)
0.5 p-p/75 Ω
Audio Output/Impedance (Analog)
2.0 V (rms)/440 Ω
■ General
Power Supply
North American model: AC 120 V, 60 Hz
Australian model: AC 100–240 V, 50/60 Hz
Power Consumption
11 W
Stand-by Power Consumption
North American model: 0.6 W
Australian model: 0.8 W
Dimensions (W x H x D)
435 W x 81 H x 312 D mm
(17 1/8 W x 3 3/16 H x 12 5/16 D inches)
Weight
3.5 kg (7.7 lbs)
Operation Condition Temperature/Humidity
5˚ C–35˚ C (41 F–95 F)/5 %–85%
Disc Compatibility
SACD, DVD-Audio, DVD-video, DVD-R/RW (VR, VIDEO), CD,
CD-R/RW, Video CD, SVCD, WMA, MP3, WMA, JPEG
Disc that have not been property finalized may only be partially
playable or not playable at all
Specifications and features subject to change without notice.
Downloaded From Disc-Player.com Integra Manuals
63
Integra Division of
ONKYO U.S.A. CORPORATION
18 park Way, Upper Saddle River, N.J. 07458, U.S.A.
Tel: 201-785-2600 Fax: 201-785-2650 http://www.integrahometheater.com
Integra Division of
ONKYO CORPORATION
Sales & Product Planning Div.: 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 072-831-8023 Fax: 072-831-8124
En
I0408-1
SN 29343848
(C) Copyright 2004 ONKYO CORPORATION Japan. All rights reserved.
64
Downloaded From Disc-Player.com Integra Manuals
* 2 9 3 4 3 8 4 8 *
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising