BubbleTron Introduction
Thank you for purchasing the BubbleTron by American DJ®. Every BubbleTron has been thoroughly tested and has been shipped in perfect
operating condition. Carefully check the shipping carton for damage
that may have occurred during shipping. If the carton appears to be
damaged, carefully inspect your fixture for any damage and be sure
all accessories necessary to operate the unit have arrived intact. In the
event damage has been found or parts are missing, please contact
our toll free customer support number for further instructions. Please,
do not return this unit to your dealer without first contacting customer
The BubbleTron is a portable high output bubble machine capable of
creating hundreds of bubbles a minute. This unit comes with a wired
On/Off remote control with a 25ft. cable. To optimize the performance
of this product, please read these operating instructions carefully to
familiarize yourself with the basic operations of this unit. Be sure you
understand these instructions completely before attempting to operate this unit.
Customer Support:
American DJ® provides a toll free customer support line, to provide
set up and installation help and to answer any question should you
encounter problems during your set up or initial operation. You may
also visit us on the web at www.americandj.com for any comments
or suggestions. Toll free customer service hours are Monday through
Friday 8:00 a.m. to 4:30 p.m. Pacific Standard Time.
(800) 322-6337
Fax: (323) 582-2610
E-mail: support@americandj.com
User Instructions
To purchase parts online visit http://part.americandj.com
Warning! To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do not
attempt to make any type of repair yourself without the manufactures
consent, doing so will void your manufactures warranty. In the unlikely
event your unit may require service please contact American DJ® customer support for further instructions.
DJ Supply® - www.americandj.com - BubbleTron Instruction Manual Page 2
BubbleTron General Instructions
Please carefully read and understand the instructions in this manual
thoroughly before attempting to operate this unit. These instructions
contain important safety information regarding the use and maintenance of this unit. Please keep this manual with the unit, for future
BubbleTron Safety Precautions
• Keep the outside of this device dry at all times. Do not spill water or other liquids into or on to your unit. Be sure all bubble juice is kept inside the fluid tray! To prevent fire or shock hazard, do not expose this product to rain or moisture.
•Do not spill water or other liquids into or on to your unit
•Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock and fire in case of an internal short
•Disconnect from main power before making any type of connection
• Do not remove the cover under any conditions. There are no user serviceable parts inside
•Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm) between this device and a wall
•Do not attempt to operate this unit, if it becomes damaged
•This unit is intended for indoor use only, use of this product out-
doors voids all warranties
•During long periods of non-use, disconnect the unit’s main power
•Always mount this unit in safe and stable matter
•Power cords should be routed so they are not likely to be walked
on, pinched by items placed upon or against them.
•Heat -The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
•The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the unit.
C. The unit has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a marked change in performance.
DJ Supply® www.americandj.com BubbleTron Instruction Manual Page 3
BubbleTron •
High velocity, high output fan
Easy accessible front fluid tank
High bubble output
Low current draw
Durable plastic casing
Optional On/Off Remote Control
Drain Spout located on the back
BubbleTron Product Registration
The BubbleTron carries a one year (365 days) limited warranty.
Please fill out the enclosed warranty card to validate your purchase.
All returned service items whether under warranty or not, must be
freight pre-paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the
return package. A brief description of the problem as well as the R.A.
number must also be written down on a piece of paper and included
in the shipping container. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. You may obtain a R.A.
number by contacting customer support at (800) 322-6337.
BubbleTron Power Supply
Power Supply: Before plugging your unit in, be sure the source
voltage in your area matches the required voltage for your American
DJ® BubbleTron. The American DJ® BubbleTron is available in a 115v
and 230v version. Because line voltage may vary from venue to venue,
be sure to plug your unit into a matching wall outlet before attempting
to operate.
DJ Supply® www.americandj.com BubbleTron Instruction Manual Page 4
BubbleTron Operation
Filling the Tray Reservoir:
1.Place the BubbleTron on a flat level surface.
2.The bubble juice tray is located in the front of the machine. Fill the tray, using premium American DJ® brand bubble juice. Make sure that you do not fill the tray above the designated fill line. Filling above the line will result in damage to the machine. After the usage,
please empty the remaining juice to prevent damage as well.
Once the tray has been filled, place the unit on flat level surface. Flip
the power switch to the “ON” position and watch the bubbles come
out by the hundreds. Be sure the unit remains in a level position to
avoid accidental leaking.
Remote Operation (Optional):
The unit may be used with an optional on/off remote that can be used
to power on the BubbleTron regardless of the setting of the units power
Remote Operation:
1. Plug the remote control into the unit.
2. Push the power button on the remote to the “ON” position, main power will be indicated by a glowing red LED above the remote power button.
BubbleTron Warranty
A. American DJ, Inc. hereby warrants, to the original purchaser, American DJ and American
Audio products to be free of manufacturing defects in material and workmanship for a prescribed
period from the date of purchase (see specific warranty period on reverse). This warranty shall be
valid only if the product is purchased within the United States of America, including possessions
and territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable evidence, at the time service is sought.
For warranty service you must obtain a Return Authorization number (RA#) before
sending back the product. Contact American DJ, Inc. Service Department at 800-322-6337. Send
the product only to the American DJ, Inc. factory. All shipping charges must be pre-paid. If the
requested repairs or service (including parts replacement) are within the terms of this warranty,
American DJ, Inc. will pay return shipping charges only to a designated point within the United
States. If the entire instrument is sent, it must be shipped in it’s original package. No accessories
should be shipped with the product. If any accessories are shipped with the product, American DJ,
Inc. shall have no liability whatsoever for loss of or damage to any such accessories, nor for the
safe return thereof.
C. This warranty is void if the serial number has been altered or removed; if the product is
modified in any manner which American DJ, Inc. concludes, after inspection, affects the reliability
of the product; if the product has been repaired or serviced by anyone other than the American DJ,
Inc. factory unless prior written authorization was issued to purchaser by American DJ, Inc.; if the
product is damaged because not properly maintained as set forth in the instruction manual.
This is not a service contract, and this warranty does not include maintenance, cleaning
or periodic check-up. During the period specified above, American DJ, Inc. will replace defective parts at its expense with new or refurbished parts, and will absorb all expenses for warranty
service and repair labor by reason of defects in material or workmanship. The sole responsibility
of American DJ, Inc. under this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of American DJ. All products covered by this
warranty were manufactured after January 1, 1990, and bear identifying marks to that effect.
American DJ, Inc. reserves the right to make changes in design and/or improvements
upon its products without any obligation to include these changes in any products theretofore
manufactured. No warranty, whether expressed or implied, is given or made with respect to any
accessory supplied with products described above. Except to the extent prohibited by applicable
law, all implied warranties made by American DJ, Inc. in connection with this product, including
warranties of merchantability or fitness, are limited in duration to the warranty period set forth
above. And no warranties, whether expressed or implied, including warranties of merchantability
or fitness, shall apply to this product after said period has expired. The consumer’s and/or Dealer’s
sole remedy shall be such repair or replacement as is expressly provided above; and under no
circumstances shall American DJ, Inc. be liable for any loss or damage, direct or consequential,
arising out of the use of, or inability to use, this product. This warranty is the only written warranty applicable to American DJ and American Audio Products and supersedes all prior warranties and written descriptions of warranty terms and
conditions heretofore published.
DJ Supply® - www.americandj.com - BubbleTron Instruction Manual Page 5
• All American Audio Products = 1-year (365 day) Limited Warranty (except V-Plus Series Amplifiers)
• All American Audio V-Plus Series Amplifiers = 3-year (1095 day) Limited Warranty
• American DJ Lighting and American DJ Branded Products = 1-year (365 day) Limited Warranty
(Such as: Special Effect Lighting, Intelligent Lighting, UV lighting, Strobes, Fog Machines, Bubble
Machines, Mirror Balls, Par Cans, Trussing, Lighting Stands etc. excluding Laser Products, lamps,
and Star Tec Series)
• American DJ Laser Products and Star Tec Products = 90-Day Limited Warranty
• American DJ L.E.D. Products = 3-year (1095 day) Limited Warranty (excluding motors which
have a 1-year (365 day Limited Warranty)
©American DJ Supply® - www.americandj.com - BubbleTron Instruction Manual Page 6
BubbleTron Specifications
VOLTAGE*: 120V~60Hz (U.S.)
230V~50Hz (Europe)
DIMENSIONS: 14” x 7” x 8.25”
WEIGHT: 4Lbs. / 2 kgs
* Voltage is preset at the factory and is not user selectable
Please Note: Specifications and improvements in the design
of this unit and this manual are subject to change without any
prior written notice.
©American DJ Supply
American DJ World Headquarters:
6122 S. Eastern Ave. Los Angeles, CA 90040 USA
Tel: 323-582-2650 / Fax: 323-582-2610
Web: www.americandj.com / E-mail: info@americandj.com
DJ Supply® - www.americandj.com - BubbleTron Instruction Manual Page 7
American DJ Europe
Junostraat 2
6468 EW Kerkrade
service@adjgroup.eu / www.americandj.eu
Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF