CED 1M
CED-1M
HDMI EDID Emulator
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
•
Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
•
To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
•
Never spill liquid of any kind on or into this product.
•
Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
•
Do not attach the power supply cabling to building surfaces.
•
Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
•
Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
•
To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE (DD/MM/YY) SUMMARY OF CHANGE
VR0
14/11/13
Preliminary Release
VS1
10/03/14
Updated text/diagrams
CONTENTS
1. Introduction�������������������������������������������� 1
2. Applications������������������������������������������� 1
3. Package Contents�������������������������������� 1
4. System Requirements���������������������������� 1
5. Features�������������������������������������������������� 2
6. Operation Controls and Functions������� 3
6.1 Front Panel����������������������������������������3
6.2 Rear Panel�����������������������������������������4
6.3 EDID Learning Procedure����������������5
6.4 Default EDID Settings�����������������������6
6.5 EDID Application Installation����������7
6.6 Using the EDID Application�����������12
7. Connection Diagram�������������������������� 15
8. Specifications�������������������������������������� 16
9. Acronyms��������������������������������������������� 17
1. INTRODUCTION
The HDMI EDID Emulator is designed to allow the adjustment of
HDMI/DVI EDID information that is provided to a source device by
a connected display so that it can output the correct video/audio
signal. Aiming to simplify the technical complications involved in
video/audio system integration, home theater installation, video/
audio equipment testing and experimentation, the unit’s learning
function allows the user to Read and Write the video/audio EDID to
the system. It also supports EDID Emulation and Bypass modes.
2. APPLICATIONS
• HDMI/DVI EDID manipulation
• Video/Audio system integration and home theater installation
• Video/Audio equipment testing
• EDID preset management
3. PACKAGE CONTENTS
• HDMI EDID Emulator
• Mini-USB to USB Type A Cable
• Operation Manual
4. SYSTEM REQUIREMENTS
Video/Audio source device, TV/display equipment with HDMI input
and output.
1
5. FEATURES
• HDMI and DVI 1.0 compliant
• Supports the following HDMI features:
-- High video bandwidth up to 300 MHz/9 Gbps
-- Resolutions up to 1080p@60 Hz and 4K×2K@24/25/30 Hz
-- 12-bit Deep Color
-- LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master
Audio (Sampling rates from 32 kHz to 192 kHz)
• Supports four different EDID functions:
-- Read: Reads the TV/display’s EDID information
-- Write: Overwrites the TV/display’s EDID information (TV/display
needs to support overwrite function)
-- Emulator: Allows the source device to read the selected EDID
information from the unit’s Default or Learned EDID memory
-- Bypass: Allows the source device to read the EDID information
directly from the TV/display
• Supports up to 8 sets of default EDID settings
• Supports DVI sources by using a HDMI to DVI adaptor
• Supports CEC and EDID pass-through
• Supports being powered by USB or compatible HDMI input
2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
1
2
3
4 Learned
Select
5
6
7
8 Default
1
2
3
HDMI IN
4
1 1~8 LEDs: When in 'Learned' or 'Default' mode, each of these LEDs
indicates a different EDID setting (1 to 8). Repeatedly press the
'Select' button to switch between settings, the LED will illuminate to
indicate the current selected settings.
2 Learned LED: Select the 'Learned' mode to save up to 8 unique
sets of HDMI EDID settings. Please refer to Section 6.3 for the EDID
learning procedure.
Default LED: Select the 'Default' mode to use the built-in default
EDID settings, press 'Select' button to choose from 1~8. Please refer
to Section 6.4 for the default EDID settings.
3 Select Button: Press for 3 seconds to switch between the 'Learned'
and 'Default' modes, the LED will illuminate to indicate the selected
mode.
Then repeatedly press the 'Select' button to cycle through EDID
settings (1 to 8).
4 HDMI IN: Connect to an HDMI source such as a DVD/Blu-ray or settop box. The unit can also be powered by an source device that
provides power over the HDMI connection.
3
6.2 Rear Panel
HDMI OUT
USB
EDID
Rd.
SET
Bypass
1 2
STATUS
1
2
3
4
Wr.
Emulator
5
1 HDMI OUT: Connect to an HDMI equipped TV/display.
2 USB: Connect the Mini-USB cable to an active USB device to power
the system. It can also be powered from a device that has HDMI
connection that supplies power.
3 EDID SET Button: Press to execute the EDID Read/Write function.
4 EDID STATUS LED: Indicates the EDID Read/Write status.
5 EDID Switch: Selects the Read/Write and Bypass/Emulator
functions.
Rd (Read): Sets the Emulator mode to 'Read' (see Section 6.3).
Wr (Write): Sets the Emulator mode to 'Write' (see Section 6.3).
Emulator: When the DIP switch is set to the 'Emulator' position,
the Video/Audio source device will read the unit's current set
EDID (1~8). To change to another EDID, press the 'Select' button
to switch between settings, the LED will illuminate to indicate the
current selected settings.
Bypass: When the DIP switch is set to 'Bypass' position, the Video/
Audio source device will read HDMI TV/display’s EDID settings
directly.
4
6.3 EDID Learning Procedure
To Read the EDID:
1. Connect a TV/display to the HDMI output for EDID reading.
2. Set the 'Emulator/Bypass (2)' switch to 'Emulator' first then set the
'Rd/Wr (1)' switch to the 'Rd. (Read)' position.
3. Press the 'Select' button for 3 seconds to put the unit into 'Learned'
mode.
4. Press the 'Select' button repeatedly to cycle through to the
required 1 to 8 EDID setting.
5. Press the 'SET' button for 3 seconds to write the EDID to the
corresponding memory as indicated by the LED.
6. When the 'STATUS' LED illuminates in Green the EDID learning has
been successfull but if the 'STATUS' LED is Red the learning has
failed.
To Write the EDID:
1. Connect a TV/display to the HDMI output for EDID writing.
2. Set the 'Emulator/Bypass (2)' switch to 'Emulator' first then set the
'Rd/Wr (1)' switch to the 'Wr. (Write)' position.
3. Press the 'Select' button repeatedly to cycle through to the
required 'Learned/Default' 1 to 8 EDID setting.
4. Press the 'SET' button for 3 seconds to overwrite the HDMI TV/
display EDID setting. The 'STATUS' LED will blink during the writing
process.
5. When the 'STATUS' LED illuminates in Green the EDID writing has
been successful but if the Status LED is Red the writing has failed.
If the 'STATUS' LED did not blink and illuminate in Red it means TV's
EDID is not writable.
Warming: Once the writing is successfully done the original EDID
will be erased. It is recommended that the original EDID settings are
backed-up by storing them in the unit before performing the overwrite.
Caution is advised when using this function.
5
6.4 Default EDID Settings
LED NO.
VIDEO
AUDIO
1
DVI
N/A
2
1080p@60 Hz, 8-bit
LPCM 2CH
3
1080p@60 Hz, 12-bit Deep
LPCM 2CH
Color
4
3D or 1080p@60 Hz, 12-bit
LPCM 2CH
Deep Color
5
4K×2K@24/25/30 Hz
LPCM 2CH
6
1080p@60 Hz, 8-bit
LPCM 5.1CH
7
3D or 1080p@60 Hz,12-bit
Dolby TrueHD or DTS-HD
Deep Color
Master Audio
4K×2K@24/25/30 Hz or 3D
Dolby TrueHD or DTS-HD
8
Master Audio
6
6.5 EDID Application Installation
The following section lists the procedures to follow when installing the
EDID application on your Windows PC. Please follow the steps outlined
below to successfully install the software.
The application can be downloaded from the product page on
the Cypress website (http://www.cypress.com.tw) and selecting the
'Downloads' tab.
Once the software has downloaded to the PC, navigate to the
download location and extract the installation folder from the
compressed file by right clicking on the .zip file and selecting 'Extract
to Folder'.
7
Once the software has extracted, enter the folder and double click
on the 'setup' application icon (highlighted below) to begin the
installation process.
The installation wizard will appear, click 'Next' to continue the
installation.
8
Click on 'I accept …' and then 'Next' to accept the license terms to
continue the installation.
Insert the user name and set the access rights for this application as
required and click on 'Next' to continue.
9
Choose a location to install the application, default is 'C:\Program
Files\CYP\CED-1M'. Click on 'Next' to continue.
Click on 'Install' to confirm the user name and save location.
10
Click on 'Finish' to complete the installation.
An icon will appear on the desktop to indicate the successful
installation of the application.
11
6.6 Using the EDID Application
Ensure that the HDMI EDID Emulator device is connected to the PC
and that the driver has installed successfully before double clicking on
the 'CED-1M' icon to start using the application.
The EDID Application includes EDID Learning, Reading, Writing and
Default settings.
12
Click on 'File' to save the Learned and Default EDID settings (up to 8
sets each). Click on the 'Learned/Default' button to switch between
modes.
Click on 'Extended EDID' with File’s 'Open .text file' to save the contents
of the Learned EDID’s amended contents.
13
Click on 'Parsing' to display the contents of EDID Block 0 and 1.
14
7. CONNECTION DIAGRAM
Blu-ray Player
HDMI Input
1
2
3
4 Learned
Select
5
6
7
8 Default
HDMI OUT
USB
HDMI IN
EDID
SET
Rd.
Bypass
1 2
STATUS
Wr.
Emulator
HDMI Output
USB Power
3D TV/Display
Note: In this example the unit is powered by a USB port on the TV/Display. It can also be
powered by a compatible device that can provide power over HDMI.
15
8. SPECIFICATIONS
Video Bandwidth
300 Mbps/9 Gbps
Input Ports
1×HDMI, 1×Mini-USB (Power only)
Output Port
1×HDMI
HDMI Input Cable
10 m@1080p/12-bit, 5 m@4K×2K
Distance
HDMI Output Cable
10 m@1080p/12-bit, 5 m@4K×2K
Distance
Resolutions
Up to 4K×2K@24/25/30 Hz
USB Power
5 V/500 mA
Dimensions
71 mm(W)×65 mm(D)×23 mm(H)/Exc. Jacks
71 mm(W)×71 mm(D)×23 mm(H)/Inc. Jacks
Weight
108 g
Chassis Material
Metal
Color
Black
ESD Protection
Human body model:
±8 kV (air-gap discharge)
±4 kV (contact discharge)
Operating Temperature
0 °C ~ 40 °C
Storage Temperature
−20 ˚C ~ 60 ˚C / −4 ˚F ~ 140 ˚F
Relative Humidity
20 ~ 90 % RH (non-condensing)
Power Consumption
2.5 W
16
9. ACRONYMS
ACRONYM
COMPLETE TERM
4K×2K
Ultra HD (3840×2160/4096×2160)
CEC
Consumer Electronic Control
EDID
Extended Display Identification Data
HDMI
High-Definition Multimedia Interface
17
CYPRESS TECHNOLOGY CO., LTD
Home page: http://www.cypress.com.tw
MPM-CED1M
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising