POWER OPTIMIZER SolarEdge Power Optimizer  Module Add-On
Module Add-On For North America
P300 / P320 / P400 / P405
POWER OPTIMIZER
SolarEdge Power Optimizer
PV power optimization at the module-level
Up to 25% more energy
Superior efficiency (99.5%)
Mitigates all types of module mismatch losses, from manufacturing tolerance to partial shading
Flexible system design for maximum space utilization
Fast installation with a single bolt
Next generation maintenance with module-level monitoring
Module-level voltage shutdown for installer and firefighter safety
USA - CANADA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - UK - ISRAEL
www.solaredge.us
SolarEdge Power Optimizer
Module Add-On for North America
P300 / P320 / P400 / P405
P320
P300
(for 60-cell modules)
P400
(for high-power
60-cell modules)
(for 72 & 96-cell
modules)
P405
(for thin film
modules)
INPUT
Rated Input DC Power(1)
300
320
400
405
W
Absolute Maximum Input Voltage
48
80
125
Vdc
(Voc at lowest temperature)
MPPT Operating Range
8 - 48
8 - 80
12.5 - 105
Vdc
Maximum Short Circuit Current (Isc)
10
11
10.1
Adc
Maximum DC Input Current
12.5
13.75
12.63
Adc
Maximum Efficiency 99.5
%
Weighted Efficiency
98.8
%
Overvoltage Category
II
OUTPUT DURING OPERATION (POWER OPTIMIZER CONNECTED TO OPERATING SOLAREDGE INVERTER)
Maximum Output Current
15
Adc
Maximum Output Voltage
60
85
Vdc
OUTPUT DURING STANDBY (POWER OPTIMIZER DISCONNECTED FROM SOLAREDGE INVERTER OR SOLAREDGE INVERTER OFF)
Safety Output Voltage per Power
1
Vdc
Optimizer
STANDARD COMPLIANCE
EMC
FCC Part15 Class B, IEC61000-6-2, IEC61000-6-3
Safety
IEC62109-1 (class II safety), UL1741
RoHS
Yes INSTALLATION SPECIFICATIONS
Maximum Allowed System Voltage
1000
Vdc
Compatible inverters
All SolarEdge Single Phase and Three Phase inverters
128 x 152 x 27.5 /
128 x 152 x 35 /
128 x 152 x 50 /
Dimensions (W x L x H)
mm / in
5 x 5.97 x 1.08
5 x 5.97 x 1.37
5 x 5.97 x 1.96
Weight (including cables)
760 / 1.7
830 / 1.8
1064 / 2.3
gr / lb
Input Connector
MC4 Compatible
Output Wire Type / Connector
Double Insulated; MC4 Compatible
Output Wire Length
0.95 / 3.0
1.2 / 3.9
m / ft
Operating Temperature Range
-40 - +85 / -40 - +185
˚C / ˚F
Protection Rating
IP68 / NEMA6P
Relative Humidity
0 - 100
%
(1)
Rated STC power of the module. Module of up to +5% power tolerance allowed.
PV SYSTEM DESIGN USING
A SOLAREDGE INVERTER(2)
Minimum String Length
(Power Optimizers)
Maximum String Length
(Power Optimizers)
Maximum Power per String
Parallel Strings of Different Lengths
or Orientations
(2)
SINGLE PHASE
THREE PHASE 208V
THREE PHASE 480V
8
10
18
25
25
50
5250
6000
12750
Yes
It is not allowed to mix P405 with P300/P400/P600/P700 in one string.
© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE
are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are
trademarks of their respective owners. Date: 12/2015 V.01. Subject to change without notice.
W
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising