WOD-16DXC Drawing

WOD-16DXC Drawing
8
7
6
4
5
3
2
1
H
H
REVISIONS
WEB DRAWING (NOT FOR FABRICATION)
REV.
A
For Fabrication Drawing of this enclosure see DWG #: 00667
B
DESCRIPTION
Initial Web Drawing per DR-00134
revise to incorporate new components and new drawing
template pdr DR-00904
DATE
6/10/2013
5/12/2014
G
G
77.11
27.686
F
F
32.486
D
D
17.613
C
7 RU
16.975
C
DDB FORM: 7.1-2 REV:E
25
29.563
NOTES: UNLESS OTHERWISE SPECIFIED
B
04/25/13
A
1. DIMENSIONS AND TOLERANCES ARE IN ACCORDANCE WITH ASME Y14.5M
2. DIMENSIONS ARE IN INCHES, UNLESS OTHERWISE SPECIFIED
3. THIS IS A SUPPLEMENTAL DRAWING AND MAY NOT BE FULLY DIMENSIONED.
THE NOTES, TOLERANCES, AND SPECIAL INSTRUCTIONS ARE TO BE USED ALONG
WITH THE LATEST REVISION OF THE SOLID DATABASE. THE PART OR ASSEMBLY
IS TO BE CONTROLLED PER THE ELECTRONIC FILE.
4. ALL PEM STUDS SHALL BE FHS FOR STAINLESS ENCLOSURES AND FHA FOR ALUMINUM.
5. ALL EXTERIOR WASHERS SHALL BE SEALING WASHERS.
6. THE FOLLOWING WEATHER STRIPPING SHALL BE USED FOR THE FOLLOWING APPLICATIONS:
DOOR LIP - TRIMLOCK 3100B3X1/8C
FAN PLATES - STICKER-TITE 1/8x3/8
AC'S - STICKER-TITE 1/4x3/4
7. CUSTOM ENCLOSURES SHALL HAVE SECURITY TORX FOR ALL EXTERIOR HARDWARE.
8. SYMBOL
DENOTES CRITICAL DIMENSIONS AND MUST BE INSPECTED.
9. REMOVE ALL BURRS AND SHARP EDGES 0.025" MAX RADIUS OR CHAMFER
10. DO NOT DEBURR PRESS FIT HOLES
11. DIMENSIONS SHALL APPLY AFTER ALODINE, PAINT, FINISH, OR COAT IS APPLIED
12. INSTALL PRESS FIT STANDOFFS, STUDS, AND NUTS IN ACCORDANCE WITH THE
MANUFACTURER’S SPECIFICATIONS.
13. ALL OPEN HOLES SHALL BE POPULATED WITH APPLICABLE HARDWARE.
14. IDENTIFY PART WITH PART NUMBER, REVISION LETTER AND SERIAL NUMBER
15. FINISHED PART TO BE FREE OF OILS, LUBRICANTS, AND OTHER CONTAMINANTS
16. NO NYLON LOCK NUTS TO BE USED ON ANY PEM STUDS, UNLESS OTHERWISE SPECIFIED.
17. ALL PEM STUDS WILL BE SECURED WITH EXTERNAL TOOTH WASHER AND STANDARD NUTS.
18. TOLERANCES, UNLESS OTHERWISE SPECIFIED:
a. HOLE SIZE:
+/- 0.003"
b. HOLE TO HOLE: +/- 0.005"
c. HOLE TO EDGE: +/- 0.010"
e. HOLE TO FOLD: +/- 0.015"
f. FOLD TO FOLD: +/- 0.020"
8
B
WEB DRAWING (NOT FOR FABRICATION)
UNLESS OTHERWISE SPECIFIED:
ANGULAR:
FRACTIONAL/NO DECIMAL:
ONE PLACE DECIMAL:
TWO PLACE DECIMAL:
THREE PLACE DECIMAL:
1
0.1250
0.0625
0.0200
0.0150
ALL HOLES: 0.0030 .
MATERIAL THICKNESS IS: 0.125"
MATERIAL: Varies
PAINT: Varies
7
6
5
4
File Location: (DDB)(EPDM Vault:)
C:\DDB\Drawing Requests\Customers\DDB Website Drawings\WOD Family WEB\DR-00134
{WOD-16DX WEB}\
3
DO NOT SCALE DRAWING
DDB Unlimited Inc.
NAME DATE
DIMENSIONS ARE IN INCHES
Model by:
DDB
05/12/14
Drawn by: EdwardW
05/16/14
Sales.Rep.: Steveb
Q.A. Appr.: SteveA
06/25/13
06/05/14
Prod.Mgr.: ClarkK
06/05/14
Control Number:
2
A
WOD-16DX
DWG, WEB,
WOD,WOD,
16"H, DX16"H, DX
SIZE
Cage Code:
D
385Y5
SCALE: 1:8
DWG. NO.:
00134
WEIGHT: 81 lbs.
REV
B
SHEET 1 OF 1
1
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF DDB Unlimited, INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF DDB Unlimited, INC. IS PROHIBITED.
E
E
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising