User Guide for the Polycom SoundStation IP 5000

User Guide for the Polycom SoundStation IP 5000
User Guide for the
Polycom® SoundStation® IP 5000
Phone
SIP 3.2.3 | March 2010 | 1725-30965-001 Rev. A
Trademark Information
POLYCOM®, the Polycom “Triangles” logo and the names and marks associated with Polycom’s products are
trademarks and/or service marks of Polycom, Inc. and are registered and/or common law marks in the United States
and various other countries. All other trademarks are property of their respective owners. No portion hereof may be
reproduced or transmitted in any form or by any means, for any purpose other than the recipient’s personal use, without
the express written permission of Polycom.
Patent Information
The accompanying product is protected by one or more U.S. and foreign patents and/or pending patent applications
held by Polycom, Inc.
Disclaimer
Some countries, states, or provinces do not allow the exclusion or limitation of implied warranties or the limitation of
incidental or consequential damages for certain products supplied to consumers, or the limitation of liability for personal
injury, so the above limitations and exclusions may be limited in their application to you. When the implied warranties
are not allowed to be excluded in their entirety, they will be limited to the duration of the applicable written warranty. This
warranty gives you specific legal rights which may vary depending on local law.
Copyright Notice
Portions of the software contained in this product are:
Copyright © 1998, 1999, 2000 Thai Open Source Software Center Ltd. and Clark Cooper
Copyright © 1998 by the Massachusetts Institute of Technology
Copyright © 1998-2003 The OpenSSL Project
Copyright © 1995-1998 Eric Young (eay@cryptsoft.com). All rights reserved
Copyright © 1995-2002 Jean-Loup Gailly and Mark Adler
Copyright © 1996-2004, Daniel Stenberg, <daniel@haxx.se>
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated
documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to
use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to
whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the
Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
DEALINGS IN THE SOFTWARE.
© 2010 Polycom, Inc. All rights reserved.
Polycom, Inc.
4750 Willow Road
Pleasanton, CA 94588-2708
USA
No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for
any purpose, without the express written permission of Polycom, Inc. Under the law, reproducing includes translating
into another language or format.
As between the parties, Polycom, Inc., retains title to and ownership of all proprietary rights with respect to the software
contained within its products. The software is protected by United States copyright laws and international treaty
provision. Therefore, you must treat the software like any other copyrighted material (e.g., a book or sound recording).
Every effort has been made to ensure that the information in this manual is accurate. Polycom, Inc., is not responsible
for printing or clerical errors. Information in this document is subject to change without notice.
ii
Contents
Registering the Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Before You Use Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Using the Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Display Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Phone Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
LED Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Line and Call Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Navigating Menus and Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Entering Data and Enabling Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Tips for Using a Conference Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Calling and Answering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Placing Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Calling by Entering a Phone Number . . . . . . . . . . . . . . . . . . . . . . . . 9
Calling by Entering an IP Address or URL . . . . . . . . . . . . . . . . . . . . 9
Calling from a Call List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Calling from a Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Calling from the Speed Dial List . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Redialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Ending Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
While Your Phone Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Rejecting Calls While Your Phone Rings . . . . . . . . . . . . . . . . . . . . . . . . 12
Forwarding Calls While Your Phone Rings . . . . . . . . . . . . . . . . . . . . . . 13
During Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Holding and Resuming Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Transferring Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Hosting Conference Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Setting Up Conferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Holding and Resuming Conferences . . . . . . . . . . . . . . . . . . . . . . . . 16
Splitting Conferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Ending Conferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Changing the Way Calls are Answered . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Forwarding Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Rejecting Calls from a Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Diverting Calls from a Contact to Another Party . . . . . . . . . . . . . . . . . 19
Temporarily Refusing All Calls (Do Not Disturb) . . . . . . . . . . . . . . . . . 19
iii
User Guide for the Polycom® SoundStation® IP 5000 Phone
Working with Call Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing Call Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Clearing Call List Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Editing Call List Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Working with Contact Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Searching Contact Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Updating Contact Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adding Contact Directory Entries . . . . . . . . . . . . . . . . . . . . . . . . . .
Updating Contact Directory Entries . . . . . . . . . . . . . . . . . . . . . . . . .
Deleting Contact Directory Entries . . . . . . . . . . . . . . . . . . . . . . . . . .
Working with Corporate Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Searching Corporate Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Saving Corporate Directory Search Results . . . . . . . . . . . . . . . . . . . . . .
Controlling What is Heard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the Ring Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Unique Ring Tones for Contacts . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the Speaker Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the Ringer Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Muting the Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Customizing the Phone Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the Time and Date Display . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the Time and Date Format . . . . . . . . . . . . . . . . . . . . . . . .
Changing the Time and Date Order . . . . . . . . . . . . . . . . . . . . . . . . .
Turning the Time and Date Display Off and On . . . . . . . . . . . . . .
Changing the Screen Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power and Startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Access to Screens and Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Overall Functioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Productivity Suite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Testing Phone Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20
21
22
22
23
23
23
23
26
26
27
27
28
28
28
29
29
29
30
30
30
31
31
32
32
33
33
35
35
36
37
37
38
39
39
39
40
Safety Notices . . . . . . . . . . . . . . . . . . . . . . . . Safety Notices–1
Polycom® SoundStation® IP 5000 Menu Structure
End-User License Agreement for Polycom® Software
iv
User Guide for the Polycom®
SoundStation® IP 5000 Phone
This guide includes overview information that you may find helpful when
you’re just starting to learn about your phone or when you have experience,
but you need a quick refresher.
Note
The Polycom® SoundStation® IP 5000 phone can be customized to show only those
options used in your organization. Therefore, there may be options covered in this
guide that you can’t access on your phone. To find out more about these options,
please talk to your system administrator.
Registering the Phone
Generally, your phone will be deployed with multiple other phones. In this
case, your system administrator will configure the phone parameters
beforehand, so that after your phone is set up, the phone will be registered and
ready to use.
If your phone isn’t part of a large phone deployment, your phone may not be
registered after it’s set up. Before you use your phone, you or your system
administrator will have to register it.
For detailed information on how to register your phone after it’s set up, see
Quick Tip 44011: Register Standalone SoundPoint IP, SoundStation IP, and Polycom
VVX 1500 Phones, available at
http://www.polycom.com/usa/en/support/voice/soundpoint_ip/VoIP_T
echnical_Bulletins_pub.html
Before You Use Your Phone
Since you can customize your phone in many different ways, and your system
administrator can enable and disable certain features, the user interface that
displays on your phone may differ from the figures that appear in this guide.
Note
This section describes the phone’s features, the icons that display on the
screen, and how to navigate menus and enter data. It also provides a link to
helpful tips to use when you’re in a conference call.
1
User Guide for the Polycom® SoundStation® IP 5000 Phone
Using the Keypad
You use the keypad on the phone to handle calls, adjust the volume, redial
numbers, navigate screens, enter data, and select options.
Select specific context-sensitive
functions that display on the
screen above each soft key
Enter special characters (when
in uppercase or lowercase
mode)
Place, answer, or end calls
Redial the last call you placed
Mute the microphone audio
from being heard at the far end
of the call. Toggle the key to
turn the microphone on or off
Enter special characters. Press
once (or twice quickly if in
numerical mode) for a dot
Enter special characters and
spaces. Press three times
quickly (when in uppercase or
lowercase mode) for a blank
space
Access features, settings,
and configuration
information; Exit the
current screen and return
to the idle screen
Scroll through menus and fields
(up or down arrow key);
Select menu items (right arrow
key);
Return to the previous menu
(left arrow key);
Enable features (right arrow
key);
View speed dial information (up
arrow key), received calls (left
arrow key), missed calls (down
arrow key), and placed calls
(right arrow key)
Select menu items; Enable or
disable menu items
Increase or decrease the sound
of the speaker and ringer
Enter numbers, letters, spaces,
and special characters; Select
menu items.
Enter special characters. Press
once (or twice quickly if in
numerical mode) for @
Display Screen
The idle screen displays the phone’s directory number and the current date
and time. The icon that displays to the left of the directory number indicates
the line or call status.
If you have messages, missed calls, or have enabled a certain feature (for
example, call forwarding or Do Not Disturb), the idle screen displays a
notification next to the directory number. If you have more than one
notification, the phone displays a scrolling notification.
2
User Guide for the Polycom® SoundStation® IP 5000 Phone
In the following figure, the scrolling notification indicates you have one
missed call and that Do Not Disturb is enabled.
Phone Status Indicators
Phone status is indicated by three bi-color LEDs (located above the phone’s
microphones) and by a line and call icon (located on the display screen next to
the directory number).
LED
Indicators
LED
Indicators
Line and
Call Icon
LED Status Indicators
The LEDs illuminate to indicate the following call states:
•
Solid red—A muted call.
•
Flashing red—A call on hold.
•
Solid green—A dial-tone is available, dialing is in progress, or a call is in
progress.
•
Flashing green—An incoming call.
3
User Guide for the Polycom® SoundStation® IP 5000 Phone
Line and Call Icons
The line and call icon changes depending on the line status (for example,
registered line or unregistered line) or call status (for example, dialing in
progress or a call on hold).
Icon
4
Line or Call State
Description
Active call using
Polycom® HD
Voice™
technology
A call is in progress using Polycom HD Voice. The
active call icons merge into one icon on the phone
screen. For example:
Active call not
using Polycom
HD Voice
A call is in progress that doesn’t use
Polycom HD Voice.
Conference
A conference call is in progress.
Dialing
The phone is dialing a number.
Do Not Disturb
The Do Not Disturb feature is enabled on your
phone. Your phone will not ring. All calls will display
in the Missed Calls list.
Forwarding
A specific forwarding feature has been enabled on
your phone. All incoming calls will be forwarded to a
number you have specified.
Hold
A call or conference is on hold.
Registered line
The phone can place and receive calls.
Registered
shared line
The phone, which shares a directory number with
another phone, can place and receive calls.
Ringing
The phone is ringing.
Unregistered line
The phone is unable to place and receive calls.
Voice mail
message
You have a new voice mail message.
User Guide for the Polycom® SoundStation® IP 5000 Phone
Navigating Menus and Calls
To navigate menus and calls, use the following tips.
After 20 seconds of inactivity, the menu system automatically exits to the idle
screen unless an edit session is in progress.
Note
If you want to...
Then do this...
Enter the main menu
Exit the main menu and return
to the idle screen
Press
.
Press
.
Press
or the Back soft key.
Return to the previous menu
Scroll through lists
Press
Scroll through lists that display
on more than one page
Select a menu item
or
.
•
Press
to Page Up.
•
Press
to Page Down.
Do one of the following:
•
Scroll to the menu item, and then press
or
.
or
•
Press the dial pad key that corresponds to
the item in the numbered menu list.
For example, to select the second menu
item, press
View additional soft keys
Press the More soft key.
Scroll through calls on hold and
an active call
Press
or
.
.
5
User Guide for the Polycom® SoundStation® IP 5000 Phone
Entering Data and Enabling Items
To enter data and enable fields or menu items, use the following tips.
Note
After 20 seconds of inactivity, the menu system automatically exits to the idle
screen unless an edit session is in progress.
If you want to...
Then do this...
Enter numbers
Press the dial pad key with the corresponding
number.
Enter text
Press the dial pad keys one or more times.
For example:
•
To enter ‘A,’ press
once.
•
To enter ‘B,’ press
two times
quickly.
•
To enter ‘C,’ press
three times
quickly.
Enter numbers, uppercase
characters, or lowercase
characters
Press the 1/A/a soft key one or more times to
select numerical, uppercase, or lowercase mode
(the mode you select will display in the title bar).
Then, press the dial pad key (with the number or
letter you want) one or more times quickly.
Enter special characters
•
Press
or
one or more
times quickly.
•
To enter other special characters, press
or
one or more times
quickly (when in uppercase or lowercase
mode).
•
To enter a dot: press
once (or
twice quickly if in numerical mode).
•
To enter @: Press
once (or twice
quickly if in numerical mode).
6
User Guide for the Polycom® SoundStation® IP 5000 Phone
If you want to...
Then do this...
Enter an IP address or URL
Press the dial pad keys one or more times. For
example:
•
To enter ‘2,’ press
once.
•
To enter ‘a,’ press
two times
quickly.
•
To enter ‘b,’ press
three times
quickly.
•
Enter text using a different
character set
To enter ‘c,’ press
quickly.
four times
Press the Encoding soft key one or more times.
When in text entry mode, the character set you
select displays in the title bar.
Enter a blank space
Press
three times quickly (in
uppercase or lowercase mode).
Delete characters you entered
Press the << soft key.
Enable or disable fields
Toggle
.
Press
.
Enable or disable menu items
Tips for Using a Conference Phone
For tips on hosting a conference call and conference call etiquette, go to
http://www.polycom.com/global/documents/products/voice/conferencin
g_solutions/conference-call-etiquette.pdf.
7
User Guide for the Polycom® SoundStation® IP 5000 Phone
Calling and Answering
During a call, the phone displays the name and directory number of the party
you’re talking with and the duration of the call. During a call, the soft keys
update so you can perform specific tasks.
The phone LEDs, as well as the line and call icon, indicate call status (see Phone
Status Indicators on page 3).
Answering Calls
You can answer a call when your phone is idle, when you have calls on hold,
or if you’re currently in a call. If you answer a call when you’re already in a
call, the call you were in is automatically placed on hold.
Your phone can handle a maximum of eight calls on hold, or one active call
and seven calls on hold. Only one call can be active at any time.
To answer a call on a private line:
>> Press
or the Answer soft key. (If your phone has a silent ring,
press the Answer soft key to answer the call.)
Note
If you have a shared line and answer the call, and then want someone on another
phone configured to use the same shared line to take the call, press the
Hold soft key. The other person will then be able to answer the call from their
phone.
Placing Calls
You can place a call by doing one of the following:
8
•
Entering a phone number.
•
Entering an IP address or URL.
•
Choosing an entry in a call list, directory, or speed dial list.
•
Redialing the previously placed call.
User Guide for the Polycom® SoundStation® IP 5000 Phone
Calling by Entering a Phone Number
You can dial a phone number with a dial tone or without a dial tone.
To dial a phone number with a dial tone:
1. Press
or the New Call soft key.
2. Enter the phone number of the party you want to call.
3. Press the Send soft key.
To dial a phone number without a dial tone:
>> Enter the phone number of the party you want to call, and then press the
Dial soft key.
Calling by Entering an IP Address or URL
Placing calls using an IP address or URL may not be enabled for your phone. For
more information, see your system administrator.
Note
To dial an IP address or URL:
1. Press
or the New Call soft key.
2. Press the URL soft key, and then enter the IP address or URL of the party
you want to call. (For information on how to enter an IP address, URL,
and special characters, see Entering Data and Enabling Items on page 6.)
When you dial a URL, the maximum number of characters you can enter is 32.
Note
3. Press the Send soft key.
9
User Guide for the Polycom® SoundStation® IP 5000 Phone
Calling from a Call List
You can choose a record in a call list and dial the associated party.
To call from a call list:
1. From the idle screen, use one of the arrow keys to access a call list:
To view this call list...
Press this arrow key...
Missed calls
Received calls
Placed calls
2. From the call list screen, scroll to the entry you want to dial, and then
press the Dial soft key.
Calling from a Directory
You can place a call from the Contact Directory or Corporate Directory.
To call from the Contact Directory:
1. Press
, and then select Features > Contact Directory.
2. From the Directory screen, find the contact you want to call, and then
press the Dial soft key.
To call from the Corporate Directory:
1. Press
, and then select Features > Corporate Directory.
2. From the Corporate Directory search screen, search for the contact you
want to call (see Searching Corporate Directory on page 27).
3. Scroll to the contact, and then press the Dial soft key.
10
User Guide for the Polycom® SoundStation® IP 5000 Phone
Calling from the Speed Dial List
Use the speed dial feature for fast, automated dialing.
Note
Only entries in your Contact Directory can be set up as speed dial entries. When
you create a Contact Directory entry, the phone automatically assigns a Speed Dial
Index number to the entry. You can change the index number or delete it. To create
a new Contact Directory entry with a speed dial index number, see Updating
Contact Directory on page 23.
To place a call from the speed dial list:
1. Press
.
2. From the Speed Dial Info screen, do one of the following:
— If you know the contact’s speed dial index number, enter the number.
or
— If you don’t know the contact’s speed dial index number, scroll to the
contact, and then press the Dial soft key.
The call is placed.
Redialing
You can redial the last call you placed, or search a list of placed calls to find a
previously-dialed number.
To dial the last number dialed:
>> Press
.
To dial a previously dialed number:
1. Press
.
2. From the Placed Calls list, scroll to the number you want to dial, and then
press the Dial soft key.
11
User Guide for the Polycom® SoundStation® IP 5000 Phone
Ending Calls
You can’t end a call that’s on hold. To end a call on hold, press the
Resume soft key, and then end the call.
Note
To end a call:
>> Press
or the End Call soft key.
While Your Phone Rings
While your phone rings, you can choose not to answer the call and do the
following:
•
Reject the call and stop your phone from ringing.
•
Forward the call to another party.
Rejecting Calls While Your Phone Rings
When you reject a call, you end the call before the call can connect. Your
system administrator determines how rejected calls are handled (for example,
rejected calls may go directly to your voice mail system). Calls you reject while
your phone rings display in the Received Calls list.
To reject a call:
>> While your phone rings, press the Reject soft key (for private lines) or the
Silence soft key (for shared lines).
The call ends before it can connect.
12
User Guide for the Polycom® SoundStation® IP 5000 Phone
Forwarding Calls While Your Phone Rings
Your company’s settings may override this feature. For more information, contact
your system administrator.
Call forwarding isn’t available on shared lines.
Note
While your phone rings, you can choose not to answer the call and forward the
call to another party.
To forward an incoming call as your phone rings:
1. While your phone rings, press the Forward soft key.
2. From the Call Forwarding screen, enter the number to forward the
incoming call to.
Your phone displays the last number you forwarded calls to. If you previously set a
forwarding number and want to enter a new one, use the << soft key to delete the
number.
Note
3. Press the Forward soft key.
The incoming call is forwarded to the party you specified. If call forwarding is
disabled, future calls will not be forwarded and forwarding remains disabled.
During Calls
During a call, you can do the following:
•
Place the call on hold.
•
Transfer the call to another party.
•
Set up a conference with the party you’re talking with and another party.
Holding and Resuming Calls
You can place a call on hold. When a call is on hold, the LEDs flash red.
Your phone can handle a maximum of eight calls on hold, or one active call
and seven calls on hold. Only one call can be active at any time.
When you have more than one call (for example, one active call and one call
on hold, or two calls on hold), a counter displays at the top-right of the screen
indicating the total number of calls you have, and which call currently
displays. The most recent call displays first.
13
User Guide for the Polycom® SoundStation® IP 5000 Phone
The following figure shows that your phone has two calls, and you’re
currently viewing the first (most recent) call.
To scroll through calls, press
or
.
To place a call on hold:
>> During a call, press the Hold soft key.
The console LEDs flash red to indicate that a call is on hold.
To resume a call on hold:
>> While a call is on hold, press the Resume soft key.
Transferring Calls
When you transfer a call, you have the option to talk to the party to whom
you’re transferring the call, or you can automatically transfer the call without
speaking to the other party.
To transfer a call:
1. During a call, press the Trnsfer soft key.
The active call is placed on hold.
2. Place a call to the party to whom you want to transfer the call.
3. When you hear the ring-back sound, or after you speak with the other
party, press the Trnsfer soft key.
To cancel the transfer before the call connects, and return to the original
call, press the Cancel soft key.
You can automatically transfer the call without speaking to the second party. After
you complete step 1, press the Blind soft key. Then, complete step 2. The transfer
automatically completes.
Note
14
User Guide for the Polycom® SoundStation® IP 5000 Phone
Hosting Conference Calls
You can create a conference with up to two other parties. After you set up a
conference, you can place the conference call on hold, split the conference call
into two calls on hold, or end the conference call (and your connection to the
conference call participants).
Setting Up Conferences
You can set up a conference in one of two ways:
•
Using the Confrnc soft key.
•
Using the Join soft key, if you have an active call and a call on hold.
To set up a conference using the Conference soft key:
1. Call the first party.
2. Press the Confrnc soft key. The active call is placed on hold.
If configured for single key-press conferences, the conference participant hears the
dial tone and ringback when the conference host places the call to the new party.
Note
3. Enter the number of the second party, and then press the Send soft key.
4. When the second party answers, press the Confrnc soft key to join all
parties in the conference.
If configured for single key-press conferences, you don’t have to press the Confrnc
soft key again.
Note
The Active:Conference screen displays.
15
User Guide for the Polycom® SoundStation® IP 5000 Phone
To set up a conference call with an active call and a call on hold:
>> If you have an active call and a call on hold, press the Join soft key.
A conference is created with the active call, the call on hold, and yourself.
If you have an active call and multiple calls on hold, the Join soft key isn’t available
from the active call. Scroll to the call on hold that you want to join to the conference,
and then press the Join soft key.
Note
Holding and Resuming Conferences
When you place a conference call on hold, you place the other two conference
participants on hold. Your phone treats a conference call on hold as one call on
hold. Therefore, your phone can have a maximum of eight conferences on hold
at one time.
To place a conference call on hold:
>> From the Active:Conference screen, press the Hold soft key.
The Hold:Conference screen displays. The other two conference participants
are placed on hold. The LEDs flash red to indicate that a call is on hold.
To resume the conference call, press the Resume soft key. The
Active:Conference screen will display again.
Splitting Conferences
When you split a conference, you end the conference and place the other two
conference participants on hold.
To split a conference:
>> From the Active:Conference or Hold:Conference screen, press the
Split soft key.
The conference ends, and all calls are split into individual calls and placed on
hold.
16
User Guide for the Polycom® SoundStation® IP 5000 Phone
Ending Conferences
When you end a conference, you end your connection to the other conference
participants. The other parties remain connected.
To end a conference:
>> From the Active:Conference screen, press the End Call soft key.
The two other conference participants remain connected.
Changing the Way Calls are Answered
You can set up your phone to do the following:
•
Forward certain incoming calls to another party.
•
Reject all the calls from a specific contact.
•
Transfer calls from a specific contact to another party.
•
Temporarily refuse all incoming calls and prevent your phone from
ringing.
Forwarding Calls
Your company’s settings may override this feature. For more information, contact
your system administrator. Call forwarding isn’t available on shared lines.
Note
You can set up your phone to forward calls to another party. You can choose
to forward all incoming calls, or just those calls that arrive when you’re
already in a call, or when you don’t answer. Your phone will forward calls
even if you enable the Do Not Disturb Feature.
To forward calls to another extension:
1. From the idle screen, press the Forward soft key.
2. From the Forwarding Type Select screen, scroll to the forwarding type
you want, and then press
. The options are:
— Always—To forward all incoming calls.
— No Answer—To forward all unanswered incoming calls.
— Busy—To forward calls that arrive when you’re already in a call.
17
User Guide for the Polycom® SoundStation® IP 5000 Phone
3. Do one of the following:
— If you selected Always, the Call Forward Always screen displays.
Enter a number to forward all incoming calls to.
— If you selected No Answer, the Call Forward No Answer screen
displays. Do the following:
a
In the Contact field, enter a number to forward all unanswered
incoming calls to.
b
In the Forward After Rings field, enter how many rings to wait
before forwarding the call (one ring is approximately six seconds).
Two rings is the recommended value.
— If you selected Busy, the Call Forward Busy screen displays. Enter a
number to forward all future incoming calls to when you’re already in
another call.
4. Press the Enable soft key.
If you selected the forwarding type Always, a moving arrow,
, and the
text “Call Forward Enabled” display on the phone screen.
To disable call forwarding:
1. From the idle screen, press the Forward soft key.
2. From the Forwarding Type Select screen, scroll to the forwarding type
you want to disable, and then press
.
3. To turn off call forwarding, press the Disable soft key.
Rejecting Calls from a Contact
You can customize your phone so that incoming calls from a particular party
don’t ring on your phone. Your system administrator determines how rejected
calls are handled (for example, rejected calls may go to your voice mail
system). Calls that are rejected from a contact display in the Missed Calls list.
Rejecting calls isn’t available on shared lines.
Note
18
User Guide for the Polycom® SoundStation® IP 5000 Phone
To reject an incoming call from a particular contact:
1. Press
, and then select Features > Contact Directory.
2. From the Directory screen, find the contact for whom you want to reject
calls, and then press the Edit soft key.
3. From the Edit Contact screen, scroll to the Auto Reject field, and then
change the Auto Reject setting to Enabled. (To enable the setting, press
.)
4. Press the Save soft key.
Diverting Calls from a Contact to Another Party
You can customize your phone so that incoming calls from a particular party
are transferred directly to another party.
To divert incoming calls from a contact to another party:
1. Press
, and then select Features > Contact Directory.
2. From the Directory screen, find the contact for whom you want to
transfer calls, and then press the Edit soft key.
3. From the Edit Contact screen, do the following:
— Scroll to the Divert Contact field, and then enter the number of the
party to whom you want to divert the call.
You can enter a maximum of 32 characters.
— Scroll to the Auto Divert field, and then change the Auto Divert
setting to Enabled. (To enable the setting, press
.)
4. Press the Save soft key.
Temporarily Refusing All Calls (Do Not Disturb)
To prevent your phone from ringing, activate the Do Not Disturb feature.
Calls you receive while Do Not Disturb is enabled will display in your
Missed Calls list. If you have chosen to forward incoming calls to another
number, calls will still be sent to that number.
When you enable Do Not Disturb, a flashing icon,
“(X) Do Not Disturb,” display on the phone screen.
, and the text
19
User Guide for the Polycom® SoundStation® IP 5000 Phone
The following figure shows what the idle screen looks like when Do Not
Disturb is enabled.
To enable and disable Do Not Disturb:
1. Press
, and then select Features.
The Features screen displays. If Do Not Disturb isn’t highlighted, scroll to
it.
2. To toggle Do Not Disturb on or off, press
.
Working with Call Lists
Your phone maintains lists of missed, received, and placed calls. Each list can
hold up to 100 entries.
If you miss a call, the idle screen will display a message indicating the number
of missed calls you have. To view information about the missed call, view your
Missed Calls list (see Viewing Call Lists on page 21). After you view the
Missed Calls list, the message on the idle screen is removed.
The following figure shows the message that displays when you miss a call.
You can save call list entries to your Contact Directory. For information on
how to update Contact Directory with an entry from a call list, see Adding
Contact Directory Entries on page 23.
20
User Guide for the Polycom® SoundStation® IP 5000 Phone
Viewing Call Lists
You can access any call list from the Call Lists menu, or you can quickly access
a call list from the idle screen. After you access a call list, you can view detailed
information about a specific entry (such as the phone number, the time and
duration of the call, and the name of the caller).
To view a call list:
>> Do one of the following:
— Press
, and then select Features > Call Lists > Missed Calls,
Received Calls, or Placed Calls.
or
— From the idle screen, use the arrow keys to access a call list:
To view this call list...
Press this arrow key...
Missed Calls
Received Calls
Placed Calls
To view details for a call list entry:
1. Press
, and then select Features > Call Lists > Missed Calls,
Received Calls, or Placed Calls.
2. From the call list, scroll to the entry for which you want more
information, and then press the Info soft key.
21
User Guide for the Polycom® SoundStation® IP 5000 Phone
Clearing Call List Entries
You can clear all the records in a call list, or just one record.
To manually clear all call list entries, restart the phone. See Overall Functioning on
page 39.
Note
To clear one or all records in a call list:
1. Press
, and then select Features > Call Lists.
2. From the Call Lists screen, do one of the following:
— To clear all the records in a call list, select Clear. From the Clear screen,
scroll to either Missed Calls, Received Calls, or Placed Calls, and
then press
.
A “Cleared!” message displays when you clear a call list.
or
— To clear a single record in a call list, scroll to either Missed Calls,
Received Calls, or Placed Calls, and then press
. From the call
list, scroll to the call you want to remove, and then press the
Clear soft key.
Editing Call List Entries
Edit a call list entry if you want to update the contact name or number before
you dial the number or save the contact to the Contact Directory.
To edit a call list entry:
1. Press
, and then select Features > Call Lists > Missed Calls,
Received Calls, or Placed Calls.
2. From the call list, scroll to the entry you want to edit, and then press the
Edit soft key.
22
User Guide for the Polycom® SoundStation® IP 5000 Phone
Working with Contact Directory
You can store a large number of contacts in your phone’s Contact Directory.
Contact your system administrator for the exact number.
You can dial and search for contacts in this directory. You may be able to add,
edit, and delete contacts. Contact your system administrator to see if you have
read-only access to your Contact Directory, or if you can update it.
Searching Contact Directory
Search for a contact by scrolling through the directory, or entering specific
search criteria.
To search for a contact in the Contact Directory:
1. Press
, and then select Features > Contact Directory.
2. From the Directory screen, press the Search soft key. Then, enter the first
few characters of the contact’s first or last name, and then press the
Search soft key again.
3. From the Directory Search screen, scroll to the contact you’re searching
for.
Updating Contact Directory
You can add a contact to the Contact Directory, or update or delete an existing
contact.
Adding Contact Directory Entries
You can add contacts to your Contact Directory in the following ways:
•
Manually (if you have permission to update your Contact Directory).
•
From a call list.
•
From a Corporate Directory (if this is set up on your phone).
23
User Guide for the Polycom® SoundStation® IP 5000 Phone
To add a Contact Directory entry manually:
1. Press
, and then select Features > Contact Directory.
2. From the Directory screen, press the Add soft key.
3. From the Add To Directory screen, enter the contact information:
Your phone may not display all the following fields. For more information, see your
system administrator.
Note
— (Optional.) Enter the First Name and Last Name of the contact.
You can enter a maximum of 32 characters.
— (Required.) Enter the Contact phone number.
You can enter a maximum of 128 characters. The phone number must
be unique, and must not already exist in the directory. If you save an
entry with a non-unique phone number, the entry will not be saved.
— (Optional.) Update the Speed Dial Index number.
The speed dial index number is automatically assigned to the next
available index value, up to a maximum value of 99. You can assign
any unused speed dial index number from 1 to 99.
If you assign a speed dial index number that is already taken, the
message “Speed dial index already exists” displays. If you enter an
invalid speed dial index number (for example, 0 or 00), the message
“Speed dial index is invalid” displays.
— (Optional.) Enter a Label for the contact.
You can enter a maximum of 32 characters.
If you specify a label, the label will be the first item that displays for
the contact in the Contact Directory and on the Speed Dial Info screen
(before the contact’s first and last names, if specified). For example, in
the following figure, Ann Brown has been assigned the label “Sales.”
— (Optional.) Set the Ring Type.
For information on setting the ring type, see Setting Unique Ring
Tones for Contacts on page 29.
— (Optional.) Assign a Divert Contact.
The Divert Contact identifies the third party to which you want this
contact’s calls sent. You can enter a maximum of 32 characters.
24
User Guide for the Polycom® SoundStation® IP 5000 Phone
— (Optional.) Change the Auto Reject and Auto Divert settings.
If you set the Auto Reject field to enabled, the calls from this contact
won’t ring on your phone. Your system administrator determines
how rejected calls are handled (for example, rejected calls may go to
your voice mail system). Calls that are rejected from a contact display
in the Missed Calls list.
If you set the Auto Divert field to enabled, each time the contact calls,
the call will be directed to a third party specified in the Divert Contact
field.
To toggle between the Enabled and Disabled settings for the
Auto Reject and Auto Divert fields, press
.
4. Press the Save soft key.
To add a Contact Directory entry from a call list:
1. To select a call list, press
, and then select Features > Call Lists >
Missed Calls, Received Calls, or Placed Calls.
2. Scroll to the entry you want to save to your Contact Directory, and then
press the Save soft key.
Only the first name, last name, and phone number are saved.
If the contact doesn’t exist in the directory, “Saved” displays on the phone
screen. If the contact already exists, “Contact already exists” displays.
You may want to go to the Contact Directory to see if the contact was saved
correctly and to add any missing contact information. To update missing contact
information, see Adding Contact Directory Entries on page 23.
Note
To add a Contact Directory entry from the Corporate Directory:
1. Press
, and then select Features > Corporate Directory.
2. From the Corporate Directory search screen, search for the contact (see
Searching Corporate Directory on page 27).
3. Scroll to the contact, and then press the View soft key.
25
User Guide for the Polycom® SoundStation® IP 5000 Phone
4. From the Contact screen, press the Save soft key to save the entry to your
Contact Directory.
Only the first name, last name, and phone number are saved. If the contact
doesn’t exist in the directory, “Saved” displays on the phone screen. If the
contact already exists, “Contact already exists” displays.
You may want to go to the Contact Directory to see if the contact was saved
correctly and to add additional contact information. To update missing contact
information, see Adding Contact Directory Entries on page 23.
Note
Updating Contact Directory Entries
You can change the information for an entry in the Contact Directory.
To update a contact in the Contact Directory:
1. Press
, and then select Features > Contact Directory.
2. From the Directory screen, find the contact whose information you want
to update, and then press the Edit soft key.
3. From the Edit Contact screen, update the contact information. For
information on the fields you can update, see Updating Contact Directory
on page 23.
4. Press the Save soft key.
Deleting Contact Directory Entries
You can delete an entry in the Contact Directory.
To delete a contact from the Contact Directory:
1. Press
, and then select Features > Contact Directory.
2. From the Directory screen, find the contact you want to delete, and then
press the Delete soft key.
The contact is deleted from the directory.
26
User Guide for the Polycom® SoundStation® IP 5000 Phone
Working with Corporate Directory
If your system administrator sets up Corporate Directory on your phone, you
may have read access to portions of your Corporate Directory. Your system
administrator determines which contacts you can see. You can search for
contacts in the Corporate Directory, and add contacts from the
Corporate Directory to your Contact Directory. For information on adding
Corporate Directory entries to your Contact Directory, see Adding Contact
Directory Entries on page 23.
You can’t update the contacts in your Corporate Directory. You can only search for
and dial contacts, and add contacts from your Corporate Directory to your Contact
Directory.
Note
Searching Corporate Directory
Search for a contact by entering specific search criteria.
Note
You can enable your phone to save Corporate Directory search results, and to
remember the last person you viewed in the directory. Whenever you re-display
Corporate Directory, the last search you performed will display, or the last person
you selected will display. To enable this feature, see Saving Corporate Directory
Search Results on page 28.
To search for a contact in the Corporate Directory:
1. Press
, and then select Features > Corporate Directory.
2. From the Corporate Directory search screen, perform a quick search or an
advanced search.
A quick search allows you to search using the contact’s last name (if the
directory is alphabetized by last name) or first name (if the directory is
alphabetized by first name). An advanced search uses any combination of
the contact’s first and last names, phone numbers, address, and title.
Do one of the following:
— To perform a quick search, enter the first few characters of the
contact’s name, and then press the Submit soft key. The screen
displays a list of contacts, starting with any successful matches.
or
— To perform an advanced search, press the AdvFind soft key. From the
Advanced Find screen, enter your search criteria, and then press the
Submit soft key. The screen displays any successful matches.
(To erase your search criteria and enter new criteria, press the
Clear soft key.)
27
User Guide for the Polycom® SoundStation® IP 5000 Phone
Saving Corporate Directory Search Results
You can enable your phone to save Corporate Directory search results, and to
remember the last person you viewed in the directory. Whenever you
re-display Corporate Directory, the results of your last search, or the last
person you selected, will display. If you don’t enable your phone to save
search results, each time you access Corporate Directory, a blank search screen
will display.
To enable your phone to save Corporate Directory search results:
1. Press
, and then select Settings > Basic > Preferences >
Corporate Directory > View Persistency.
2. Scroll to Enabled, and then press
.
3. Press the Back soft key.
Controlling What is Heard
You can change what is heard by doing the following:
•
Changing the ring tone for your phone.
•
Selecting unique ring tones for contacts.
•
Adjusting the volume of the speaker.
•
Adjusting the volume of the ring tone.
•
Muting the microphone so the far site(s) can’t hear you.
Changing the Ring Tone
You can select from many different ring tones to distinguish your phone from
your neighbor’s.
To select a different ring tone:
1. Press
, and then select Settings > Basic > Ring Type.
2. From the Ring Type screen, scroll to the ring type you want. To hear the
ring type before you select it, press the Play soft key. The default ring
type is Low Trill.
3. To select the ring type, press
28
.
User Guide for the Polycom® SoundStation® IP 5000 Phone
Setting Unique Ring Tones for Contacts
Your company’s settings may override this feature. For more information, contact
your system administrator.
Note
You can set a distinctive ring tone for each contact in your Contact Directory
so you can distinguish callers.
To set a distinctive ring tone for a contact:
1. Press
, and then select Features > Contact Directory.
2. From the Directory screen, scroll to the contact for whom you want to
assign a distinctive ring tone, and then press the Edit soft key.
3. From the Edit Contact screen, scroll to Ring Type, and then enter a
number corresponding to one of the ring types available.
(To determine the number associated with a ring type, go to the idle
screen, press
, and then select Settings > Basic > Ring Type. Each
ring type has a number associated with it.)
4. Press the Save soft key.
Changing the Speaker Volume
You can raise or lower the volume of the sound you hear.
To adjust the speaker volume:
>> During a call, press
to adjust the volume up or down.
Changing the Ringer Volume
You can raise or lower the volume of the sound you hear when your phone
rings.
To adjust the ringer volume:
>> When the phone is idle, press
or down.
to adjust the ringer volume up
29
User Guide for the Polycom® SoundStation® IP 5000 Phone
Muting the Microphone
You can mute the microphone if you do not want other parties to hear you.
When you mute the microphone, the three console LEDs glow red to indicate
that the other party (or parties) can’t hear you. You can still hear all other
parties while Mute is enabled.
To mute or unmute the microphone:
>> During a call, press
.
To mute or unmute the microphone if you use external microphones:
>> Press
on the phone or the mute button on the top of the external
microphones.
Customizing the Phone Display
You can change how the phone screen looks by doing the following:
•
Changing the language the text displays in.
•
Changing how the time and date display.
•
Changing the screen contrast.
•
Changing the backlight intensity.
Changing the Language
The phone supports many languages. English (Internal) is the default
language that displays.
To change the language:
1. Press
, and then select Settings > Basic > Preferences > Language.
2. From the Language screen, scroll to the language you want, and then
press
.
The text on the screen changes to the language that you selected.
30
User Guide for the Polycom® SoundStation® IP 5000 Phone
Changing the Time and Date Display
The time and date appear on the idle screen of your phone. If the phone can’t
obtain a time and date, the display will flash. If this happens, or if the time or
date is incorrect, see your system administrator.
You can select from various formats for the time and date display, including
whether the time or date displays first (clock order). You can also turn the time
and date display off, so the time and date doesn’t display on the idle screen.
Select and set options that are right for you.
Changing the Time and Date Format
You can change the way the date and time display on the idle screen. For
example, for the date, you can display the month before the day, choose the
abbreviated forms for the month and day, or choose the DD/MM/YY format.
For the time, you can choose either the 12-hour clock (for example, 4:35 PM) or
24-hour clock (for example, 16:35) notation.
To change the format of the time and date display:
1. Press
, and then select Settings > Basic > Preferences >
Time and Date.
2. From the Time and Date screen, do one of the following:
— To change the date format, press
.
or
— To change the time format, scroll to Clock Time, and then press
.
3. From the Clock Date screen or the Clock Time screen, scroll to the date or
time format you want, and then press
. The default settings use the
formats “Monday, January 1” and “12 AM/PM.”
31
User Guide for the Polycom® SoundStation® IP 5000 Phone
Changing the Time and Date Order
You can change the order of the time and date on the idle screen. For example,
you can display the date before the time, or the time before the date.
To change the order of the time and date display:
1. Press
, and then select Settings > Basic > Preferences >
Time and Date > Clock Order.
2. From the Clock Order screen, scroll to the clock order you want, and then
press
. The default setting is date before time.
Turning the Time and Date Display Off and On
You can turn the time and date display off so the time and date don’t display
on the idle screen.
To turn the time and date display off:
1. Press
, and then select Settings > Basic > Preferences >
Time and Date.
2. From the Time and Date screen, scroll to Disable, and then press
To turn the time and date display back on:
1. Press
, and then select Settings > Basic > Preferences >
Time and Date.
2. From the Time and Date screen, press
32
.
.
User Guide for the Polycom® SoundStation® IP 5000 Phone
Changing the Screen Contrast
You can set how light or dark the screen appears.
To adjust the contrast on the phone screen:
1. Press
, and then select Settings > Basic > Contrast.
2. From the Contrast screen, press the Up or Down soft keys to increase or
decrease the display contrast.
3. Press the Ok soft key.
Changing the Backlight
Backlight intensity on the phone has three components:
•
Backlight On
•
Backlight Idle
•
Maximum Intensity
You can modify the Backlight On intensity and the Backlight Idle intensity
separately. You can select high, medium, low, and off levels for both.
When you modify the Maximum Intensity, you modify the entire backlight
intensity scale. For example, if you decrease the Maximum Intensity, the low,
medium, and high levels for both Backlight On and Backlight Idle intensities
decrease.
The Backlight On intensity applies to the following events:
•
Any key press
•
Incoming calls
•
Ending a call, holding a call, resuming a call by the other party
•
A voice message received
If you do not press any keys on the phone, after 20 seconds of the backlight
turning on, the backlight dims (or changes) to medium in the following cases:
•
A call is in progress
•
A call is on hold
•
There is an incoming call (ringing)
•
There is an outgoing call (ringing back)
•
Any menu shows on the display
In all other cases, the Backlight Idle intensity applies.
33
User Guide for the Polycom® SoundStation® IP 5000 Phone
To change the backlight intensity:
1. Press
, and then select Settings > Basic > Backlight Intensity.
2. From the Backlight Intensity screen, select Backlight On Intensity.
3. From the Backlight On Intensity screen, scroll to the intensity you want,
and then press
. The default Backlight On Intensity is High.
4. If you selected a new intensity, press the Save soft key. If you did not
select a new intensity, press the Back soft key.
5. From the Backlight Intensity screen, select Backlight Idle Intensity.
6. From the Backlight Idle Intensity screen, scroll to the intensity you want,
and then press
. The default Backlight Idle Intensity is Low.
7. If you selected a new intensity, press the Save soft key. If you did not
select a new intensity, press the Back soft key.
8. From the Backlight Intensity screen, select Maximum Intensity.
9. From the Maximum Intensity screen, press the Up or Down soft keys to
increase or decrease the maximum intensity the screen can display, and
then press the Ok soft key.
34
User Guide for the Polycom® SoundStation® IP 5000 Phone
Troubleshooting
The following tables contain general troubleshooting information to help you
solve any problems you might encounter when you use the
SoundStation IP 5000 conference phone. The tables list possible trouble
symptoms, the likely causes of these problems, and recommended corrective
actions to take. Problems are grouped as follows:
•
Power and Startup on page 35
•
Controls on page 36
•
Access to Screens and Systems on page 37
•
Calling on page 37
•
Displays on page 38
•
Audio on page 39
•
Overall Functioning on page 39
•
Productivity Suite on page 39
To obtain more detailed troubleshooting information, you can access certain
menus on your phone that test your phone hardware (see Testing Phone
Hardware on page 40).
If you require more information or assistance, contact your system
administrator.
Power and Startup
Symptom
Problem
Corrective Action
The display shows “Network Link
is Down.”
The network cable isn’t properly
connected.
Try the following:
•
Check the cable termination at the
switch or hub (furthest end of the
cable from the phone).
•
Check that the switch or hub is
operational (flashing link/status
lights).
•
Verify that the LAN port is active.
Press
, and then select
Status > Network > Ethernet. From
the Ethernet screen, scroll to
LAN port and verify that it’s Active.
35
User Guide for the Polycom® SoundStation® IP 5000 Phone
Controls
Symptom
Problem
Corrective Action
The dial pad doesn’t work.
The dial pad on the phone
doesn’t respond.
Try the following:
•
Check for a response from other
feature keys or from the dial pad.
•
Place a call to the phone from a known
working telephone. Check for display
updates.
•
Check if the LAN port is active.
Press
, and then select
Status > Network > Ethernet. From
the Ethernet screen, scroll to
LAN port and verify that it’s Active.
•
Check the termination at the switch or
hub end of the network LAN cable.
Ensure that the switch/hub port is
operational (if it isn’t accessible,
contact your system administrator).
•
Restart the phone (see Overall
Functioning on page 39).
(Before restarting your phone, contact
your system administrator. Your
system administrator may want to
troubleshoot the phone in more detail
before restarting the phone and
losing current status information.)
36
User Guide for the Polycom® SoundStation® IP 5000 Phone
Access to Screens and Systems
Symptom
Problem
Corrective Action
There is no response when you
press a feature key.
The phone isn’t in an active
state.
Try the following:
•
Press the keys more slowly.
•
Call the phone to confirm that inbound
call display and ringing is normal. If
successful, try to press feature keys
within the call to access certain
screens (for example, the Directory
screens).
•
To confirm the line is actively
registered to the call server,
press
, and then select
Status > Lines. From the Line
Information screen, verify that your
phone line is registered.
•
The display shows “Network Link
is Down.”
To attempt re-registration with the call
server, reboot the phone. For more
information, see your system
administrator.
The network cable isn’t properly
connected.
See Power and Startup on page 35.
Symptom
Problem
Corrective Action
There is no dial tone.
Power isn’t correctly applied to
the phone.
Verify that power is correctly applied to the
phone:
Calling
•
Check that the display is illuminated.
•
Ensure the network cable is inserted
properly on the underside of the
phone. (Try unplugging and
re-inserting the cable.)
37
User Guide for the Polycom® SoundStation® IP 5000 Phone
Symptom
Problem
Corrective Action
There is no audible ring tone.
Ringer volume is low, or the
Ring Type is set to Silent Ring.
Verify ringer volume and Ring Type:
•
To adjust the ringer volume, press
when the phone is in
the idle state.
•
Check that the Ring Type isn’t set to
Silent Ring. (See Changing the Ring
Tone on page 28.)
Outbound or inbound calling is
unsuccessful.
Place a call to the phone under
investigation. Check that the display
indicates incoming call information.
The phone isn’t registered to a
server.
Ask your system administrator to register
the phone to a server.
Symptom
Problem
Corrective Action
There is no display.
Power isn’t correctly applied to
the phone.
Verify that power is correctly applied to the
phone:
A “hollow” phone icon,
,
displays next to the directory
number.
Displays
The display is incorrect.
The display has bad contrast.
The display is flickering.
38
•
Check that the display is illuminated.
•
Ensure the network cable is inserted
properly on the underside of the
phone. (Try unplugging and
re-inserting the cable.)
•
If your phone uses Power over
Ethernet (PoE), have your system
administrator check that the switch is
supplying power to the phone.
The contrast needs adjustment.
Adjust the screen contrast. (See Changing
the Screen Contrast on page 33.)
Certain types of older fluorescent
lighting cause the display to
appear to flicker.
Try the following:
•
Move the phone away from the lights.
•
Replace the lights.
User Guide for the Polycom® SoundStation® IP 5000 Phone
Audio
Symptom
Problem
Corrective Action
The speaker has no audible
sound.
Speaker volume is low.
Adjust the speaker volume. During a call,
press
to adjust the volume.
Overall Functioning
Symptom
Problem
Corrective Action
The phone is malfunctioning.
The phone may need to be
restarted.
Restart the phone:
Note: If your phone malfunctions, you may
be able to restore normal operation
without restarting it. Before you restart
your phone, contact your system
administrator.
•
Press
, and then select
Settings > Basic > Restart Phone.
The Restart Phone screen displays.
The message “Are you sure?”
displays. To restart the phone, press
the Yes soft key.
The restart process begins. The process
ends when the idle screen displays.
Productivity Suite
Symptom
Problem
Corrective Action
You’re trying to access Corporate
Directory, but it isn’t available on
your phone.
The license isn’t installed on your
phone or it has expired.
Do the following:
1.
Press
, and then select
Status > Licenses.
2.
From the Licenses screen, verify that
Corporate Directory has a valid
license.
39
User Guide for the Polycom® SoundStation® IP 5000 Phone
Testing Phone Hardware
Your system administrator may ask you to access a diagnostics menu on your
phone to test your phone hardware. From the diagnostics menu, you can test
your phone’s microphones, keypad mappings, and display. See your system
administrator for instructions on how to perform these tests.
To access the diagnostics menus:
>> Press
, and then select Status > Diagnostics > Test Hardware >
Audio Diagnostics, Keypad Diagnostics, or Display Diagnostics.
40
Safety Notices
Service Agreements
Please contact your Polycom Authorized Reseller for information about service agreements applicable to your
product.
Governing Law
This Limited Warranty and Limitation of Liability shall be governed by the laws of the State of California, U.S.A., and
by the laws of the United States, excluding their conflicts of laws principles. The United Nations Convention on
Contracts for the International Sale of Goods is hereby excluded in its entirety from application to this Limited
Warranty and Limitation of Liability.
All rights reserved under International and Pan-American Copyright Conventions. No part of the contents of this
manual may be copied, reproduced, or transmitted in any form or by any means, or translated into another language
or format, in whole or part, without written consent from Polycom, Inc. Do not remove (or allow anybody else to
remove) any product identification, copyright or other notices.
Limitations of Liability
LIMITATION OF LIABILITY. TO THE FULL EXTENT ALLOWED BY LAW, POLYCOM EXCLUDES FOR ITSELF
AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING
NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF
ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR
DATA, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE,
INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS PRODUCTS,
EVEN IF POLYCOM OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE
PRICE PAID, AT POLYCOM’S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE
AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Safety Notices - 1
User Guide for the Polycom® SoundStation® IP 5000 Phone
Polycom Limited Warranty and Limitation Liability
LIMITED WARRANTY. Polycom warrants to the end user (“Customer”) that this product is expected to be free from
defects in workmanship and materials, under normal use and service, for one year from the date of purchase from
Polycom or its authorized reseller.
Polycom’s sole obligation under this express warranty is at Polycom’s option and expense, to repair the defective
product or part, deliver to Customer an equivalent product or part to replace the defective item, or if neither of the
two foregoing options are reasonably available, Polycom may, on its sole discretion, refund to Customer the
purchase price paid for the defective product. All products that are replaced will become the property of Polycom.
Replacement products or parts may be new or reconditioned.
Polycom is expected to warrant any replaced or repaired product or part for ninety (90) days from shipment, or the
remainder of the initial warranty period, whichever is longer. Products returned to Polycom must be sent prepaid
and packaged appropriately for safe shipment, and it is recommended that they be insured or sent by a method that
provides for tracking of the package. Responsibility for loss or damage does not transfer to Polycom until the
returned item is received by Polycom. The repaired or replaced item will be shipped to Customer, at Polycom’s
expense, not later than thirty (30) days after Polycom receives the defective product, and Polycom will retain risk of
loss or damage until the item is delivered to Customer.
Exclusions
Polycom will not be liable under this limited warranty if its testing and examination disclose that the alleged defect or
malfunction in the product does not exist or results from:
• Failure to follow Polycom’s installation, operation, or maintenance instructions.
• Unauthorized product modification or alteration.
• Unauthorized use of common carrier communication services accessed through the product.
• Abuse, misuse, negligent acts or omissions of Customer and persons under Customer’s control; or
• Acts of third parties, acts of God, accident, fire, lightening, power surges or outages, or other hazards.
Warranty Exclusive
IF A POLYCOM PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY
FOR BREACH OF THAT WARRANTY SHALL BE REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE
PRICE PAID, AT POLYCOM’S OPTION. TO THE FULL EXTENT ALLOWED BY LAW, THE FOREGOING
WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, TERMS,
OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR
OTHERWISE, INCLUDING WARRANTIES, TERMS, OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR
A PARTICULAR PURPOSE, SATISFACTORY QUALITY, CORRESPONDENCE WITH DESCRIPTION, AND
NON-INFRINGEMENT, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. POLYCOM NEITHER ASSUMES NOR
AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE
SALE, INSTALLATION, MAINTENANCE OR USE OF ITS PRODUCTS.
Safety Notices - 2
User Guide for the Polycom® SoundStation® IP 5000 Phone
Safety and Compliance
Part 15 FCC Rules
This device is compliant with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interferences received, including interference that may cause undesired operation.
Class B Digital Device or Peripheral
Note: This equipment is tested and complies with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
Modifications
In accordance with Part 15 of the FCC Rules, the user is cautioned that any changes or modifications not expressly
approved by Polycom, Inc. could void the user’s authority to operate the equipment. This equipment may not be
used on a coin service or party line.
Installation Instructions
Installation must be performed in accordance with all relevant national wiring rules.
L’Installation doit être exécutée conformément à tous les règlements nationaux applicable au filage électrique.
When using Power over Ethernet (PoE), the equipment is to be connected only to PoE networks without
connections to the outside plant.
Plugs Acts as Disconnect Device
The socket outlet to which this apparatus is connected must be installed near the equipment and must always be
readily accessible.
La prise électrique à laquelle l’appareil est branché doit être installée près de l’équipement et doit toujours être
facilement accessible.
Industry Canada (IC)
This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CE and VCCI Mark
This SoundStation IP 5000 phone is marked with the CE mark. This mark indicates compliance with EC Directives
2006/95/EC and 2004/108/EC. A full copy of the Declaration of Conformity can be obtained from Polycom Ltd.,
270 Bath Road, Slough, Berkshire, SL1 4DX, UK.
Safety Notices - 3
User Guide for the Polycom® SoundStation® IP 5000 Phone
Safety and Compliance (continued)
WARNING Electrical Safety
To avoid electric shock, do not connect safety extra low voltage (SELV) circuits to teleconference station network
(TNV) circuits. LAN ports contain SELV circuit, and WAN ports contain TNV circuits. Some LAN and WAN ports
both use RJ-45 connectors. Use caution when connecting cables.
This product is rated 48Vdc, 0.375A. When used with the optional external power supply, the power supply shall be
a Listed power supply with a LPS output, rated 48V, min. 0.375A.
Safety Notices - 4
Polycom® SoundStation® IP 5000 Menu Structure
Menu Structure
1
Features
1
2
3
4
5
Do Not Disturb
Forward
If enabled
1
2
3
Contact Directory
Corporate
Directory
2
If enabled
and license
available
If enabled
Call Lists
1
2
3
4
6
Always
No Answer
Busy
Missed Calls
Received Calls
Place Calls
Clear
Messages
Organization
dependent
1
Message Center
1
2
Phone
Application
Status
1
2
Platform
3
Configuration
1
TCP/IP
Parameters
Ethernet
Network
Statistics
Main
Components
1
Audio
Diagnostics
Keypad
Diagnostics
Display
Diagnostics
Network
2
3
3
4
1
2
Lines
Diagnostics
1
Test Hardware
2
3
2
Graphs
1
2
3
3
5
CD Status
6
Licenses
continued on next page...
CPU Load
Network Load
Memory Usage
Media Statistics
If enabled
and license
available
If licenses
available
...continued from previous page
3
Settings
1
Basic
1
Preferences
1
Languages
2
Time & Date
3
2
3
4
Applications
Clock Date
2
3
4
Clock Time
Clock Order
Disable
1
View
Persistency
Possible 14
formats
Corporate
Directory
4
Screen Capture
1
Backlight On
Intensity
Backlight Idle
Intensity
Maximum
Intensity
3
Advanced
1
If enabled
Contrast
Backlight
Intensity
2
2
Possible 19
languages
4
Ring Type
5
Restart Phone
Possible 22
ring types
Requires
administrative
password
Organization
dependent
End-User License Agreement for Polycom® Software
This End-User License Agreement (“Agreement”) is a legal agreement between you (either an individual
or a single entity) and Polycom, B.V for the Polycom Software Product licensed by Polycom B.V in Europe,
the Middle East, Africa, and Asia Pacific or Polycom, Inc., for the Polycom Software Product licensed by
Polycom, Inc. in the rest of the world (collectively, “Polycom”). The Software Product includes the
computer software included herewith and may include associated media, printed materials and online or
electronic documentation (“Software Product”). By clicking ‘I agree’ or by installing, copying, or otherwise
using the Software Product, you agree to be bound by the terms of this Agreement. If you do not agree to
the terms of this Agreement, do not install or use the Software Product, and return it to your place of
purchase for a full refund.
The Software Product is protected by copyright laws and international copyright treaties, as well as other
intellectual property laws and treaties. The Software Product is licensed (not sold) to you, and its use is
subject to the terms of this Agreement.
1. GRANT OF LICENSE.
Subject to the terms of this Agreement, Polycom grants to you a nonexclusive license to install and use the
Software Product included with the Polycom product that incorporates or uses the Software Product (the
“Product”). You may use the Software Product only in connection with the use of the Product. You are not
permitted to lease, rent, distribute or sublicense the Software Product or to use the Software Product in a
time-sharing arrangement or in any other unauthorized manner. Further, no license is granted to you in
the human readable code of the Software Product (source code). Except as provided below, this License
Agreement does not grant you any rights to patents, copyrights, trade secrets, trademarks, or any other
rights in respect to the Software Product.
2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS.
2.1 Limitations on Reverse Engineering, Decompilation, and Disassembly. You may not reverse
engineer, decompile, or disassemble the Software Product, except and only to the extent that such activity
is expressly permitted by applicable law notwithstanding this limitation. The Software Product is licensed
as a single product. Its component parts may not be separated for use on more than one Product.
2.2 Backup. Except as expressly provided for under this Agreement, you may not copy the Software
Product, except, however, you may keep one copy of the Software Product and, if applicable, one copy of
any previous version for back-up purposes, only to be used in the event of failure of the original. All
copies of the Software Product must be marked with the proprietary notices provided on the original
Software Product. You may not reproduce the supporting documentation accompanying the Software
Product.
2.3
Modifications. You may not modify, translate, or create derivative works of the Software Product.
2.4 Proprietary Notices. You may not remove or obscure any proprietary notices on or in the Software
Product or the supporting documentation.
2.5 Software Transfer. You may permanently transfer all of your rights under this Agreement provided
you retain no copies, you transfer all of the Software Product (including all component parts, the media,
any printed materials, any upgrades, this Agreement, and, if applicable, the Certificate of Authenticity),
and any recipient agrees to the terms of this Agreement. If the Software Product is an upgrade, any
transfer must include all prior versions of the Software Product. However, if the Software Product is
marked “Not for Resale” or “NFR,” you may not resell it or otherwise transfer it for value.
2.6 Copyright. All title and copyrights in and to the Software Product (including, but not limited to, any
images, photographs, animations, video, audio, music, text, and “applets” incorporated into the Software
Product), the accompanying printed materials, and any copies of the Software Product are owned by
Polycom or its suppliers. The Software Product is protected by copyright laws and international treaty
provisions. Title, ownership rights, and intellectual property rights in the Software Product shall remain In
Polycom or its suppliers. Title and related rights in the content accessed through the Software Product is
the property of such content owner and may be protected by applicable law. This Agreement gives you no
rights in such content.
2.7 Confidentiality. The Software Product contains valuable proprietary information and trade secrets
of Polycom and its suppliers and you shall protect the confidentiality of, and avoid disclosure and
unauthorized use of, the Software Product.
2.8 Dual-Media Software. You may receive the Software Product in more than one medium.
Regardless of the type or size of medium you receive, you may use only one medium that is appropriate
for your single Product. You may not use or install the other medium on another Product.
2.9 Reservation. Polycom reserves all rights in the Software Product not expressly granted to you in this
Agreement.
3. SUPPORT SERVICES.
Polycom may provide you with support services related to the Software Product (“Support Services”). Use
of Support Services is governed by the Polycom policies and programs described in the
Polycom-provided materials. Any supplemental software code provided to you as part of the Support
Services is considered part of the Software Product and is subject to the terms and conditions of this
Agreement. With respect to technical information you provide to Polycom as part of the Support Services,
Polycom may use such information for its business purposes, including for product support and
development. Polycom will not utilize such technical information in a form that personally identifies you.
4. TERMINATION.
Without prejudice to any other rights, Polycom may terminate this Agreement if you fail to comply with
any of the terms and conditions of this Agreement. In such event, you must destroy all copies of the
Software Product and all of its component parts. You may terminate this Agreement at any time by
destroying the Software Product and all of its component parts.
5. UPGRADES.
If the Software Product is labeled as an upgrade, you must be properly licensed to use the software
identified by Polycom as being eligible for the upgrade in order to use the Software Product. A Software
Product labeled as an upgrade replaces and/or supplements the software that formed the basis for your
eligibility for the upgrade. You may use the resulting upgraded Software Product only in accordance with
the terms of this Agreement. If the Software Product is an upgrade of a component of package of software
programs that you licensed as a single product, the Software Product may be used and transferred only as
part of that single Software Product package and may not be separated for use on more than one Product.
6. WARRANTY AND WARRANTY EXCLUSIONS.
6.1 Limited Warranty. Polycom warrants that (a) the Software Product will perform substantially in
accordance with the accompanying documentation for a period of ninety (90) from the date of receipt by
you, and (b) any Support Services provided by Polycom shall be substantially as described in applicable
written materials provided to you by Polycom, and Polycom support engineers will make commercially
reasonable efforts to solve any problem issues. Polycom does not warrant that your use of the Software
Product will be uninterrupted or error free, or that all defects in the Software Product will be corrected.
Polycom’s sole obligation under this express warranty shall be, at Polycom’s option and expense, to
refund the purchase price paid by you for any defective software product which is returned to Polycom
with a copy of your receipt, or to replace any defective media with software which substantially conforms
to applicable Polycom published specifications. Any replacement Software Product will be warranted for
the remainder of the original warranty period or thirty (30) days, whichever is longer.
6.2 Warranties Exclusive. If this Software Product does not operate as warranted above, your sole
remedy for breach of that warranty shall be repair, replacement, or refund of the purchase price paid, at
Polycom’s option. TO THE FULL EXTENT ALLOWED BY LAW, THE FOREGOING WARRANTIES AND
REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF All OTHER WARRANTIES, TERMS OR
CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY
OR OTHERWISE, INCLUDING WARRANTIES, TERMS OR CONDITIONS OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, SATISFACTORY QUALITY, CORRESPONDENCE WITH
DESCRIPTION, AND NON-INFRINGEMENT, ALL OF WHICH ARE EXPRESSLY DISCLAIMED.
POLYCOM NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY
OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, OR USE
OF THIS SOFTWARE PRODUCT.
POLYCOM SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION
DISCLOSE THAT THE ALLEGED DEFECT OR MALFUNCTION IN THE SOFTWARE PRODUCT DOES
NOT EXIST OR WAS CAUSED BY YOUR OR ANY THIRD PERSON’S MISUSE, NEGLECT, IMPROPER
INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO MODIFY THE PRODUCT, OR ANY
OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE,
LIGHTNING, POWER CUTS OR OUTAGES, OTHER HAZARDS, OR ACTS OF GOD.
7. LIMITATION OF LIABILITY.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL POLYCOM
OR ITS SUPPLIERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL
DAMAGES WHATSOEVER (INCLUDING. WITHOUT LIMITATION, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY
OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OR INABILITY TO USE THE SOFTWARE
PRODUCT OR THE PROVISION OF OR FAILURE TO PROVIDE SUPPORT SERVICES, EVEN IF
POLYCOM HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN ANY CASE,
POLYCOM’S ENTIRE LIABILITY SHALL BE LIMITED TO THE GREATER OF THE AMOUNT
ACTUALLY PAID BY YOU FOR THE SOFTWARE PRODUCT OR U.S. $5.00; PROVIDED, HOWEVER, IF
YOU HAVE ENTERED INTO A POLYCOM SUPPORT SERVICES AGREEEMNT, POLYCOM’S ENTIRE
LIABILITY REGARDING SUPPORT SERVICES SHALL BE GOVERNED BY THE TERMS OF THAT
AGREEMENT.
8. DISCLAIMER.
Some countries, states, or provinces do not allow the exclusion or limitation of implied warranties or the
limitation of incidental or consequential damages for certain products supplied to consumers, or the
limitation of liability for personal injury, so the above limitations and exclusions may be limited in their
application to you When the implied warranties are not allowed to be excluded in their entirety, they will
be limited to the duration of the applicable written warranty. This warranty gives you specific legal rights
which may vary defending on local law.
9. EXPORT CONTROLS.
The Software Product may not be downloaded or otherwise exported or re-exported (i) into (or to a
national or resident of) Cuba, North Korea, Iran, Syria, Sudan, or any other country to which the U.S. has
embargoed goods; or (ii) to anyone on the U.S Treasury Department’s List of Specially Designated
Nationals or the U.S. Commerce Department’s Table of Denial Orders. By downloading or using this
Software Product, you are agreeing to the foregoing and you are representing and warranting that you are
not located in, under the control of, or a national or resident of any such country or on any such list. If you
obtained this Software Product outside of the United States, you are also agreeing that you will not export
or re-export it in violation of the laws of the country in which it was obtained.
10. MISCELLANEOUS.
10.1 Governing Law. This Agreement shall be governed by the laws of the State of California, as such
laws are applied to agreements entered into and to be performed entirely within California between
California residents, and by the laws of the United States. The United Nations Convention on Contracts for
the International Sale of Goods (1980) is hereby excluded in its entirety from application to this
Agreement.
10.2 General. This Agreement represents the complete agreement concerning this license and may
amended only by a writing executed by both parties. If any provision of this Agreement is held to be
unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable.
10.3 Contact. If you have any questions concerning this Agreement, or if you desire to contact Polycom
for any reason, please contact the Polycom office serving your country.
10.4 U.S. Government Restricted Rights. The software and documentation provided by Polycom
pursuant to this Agreement are “Commercial Items,” as the term is defined at 48 C.F.R. §2.101, consisting
of “Commercial Computer Software” and “Commercial Computer Software Documentation,” as such
terms are used in 48 C.F.R. §12.212 or 48 C.F.R. §227.7202, as applicable. Consistent with 48 C.F.R. §12.212
or 48 C.F.R. §§227.7202-1 through 227.7202-4, as applicable, the Commercial Computer Software and
Commercial Computer Software Documentation are licensed to United States Government end users (1)
only as Commercial Items and (2) with only those rights as are granted to all other users pursuant to the
terms of this Agreement.
www.polycom.com
Corporate Headquarters:
4750 Willow Road, Pleasanton, CA 94588,
USA
Phone: 925.924.6000
Israel Office:
94 Derech Em Hamoshavot P.O.B. 3654,
Petach-Tikva 49130, Israel
Phone: +972 3 925 1444
Fax: +972 3 921 1571
Netherlands Office:
Tarnspolis Park, Siriusdreef 41, 2132 Wt
Hoofddorp Netherlands
Phone: 31-0-230-2600
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising