Suntan SPECIFICATION FOR APPROVAL CUSTOMER APPROVE

Suntan SPECIFICATION  FOR  APPROVAL  CUSTOMER  APPROVE
SPECIFICATION
FOR
APPROVAL
CUSTOMER
PART NAME
Ceramic Disc Capacitors
SPEC
TS15 0.1uF 25V +/-20% P:5.08mm Y5V bulk RoHS*
PART NO
DATE
2011-11-17
CUSTOMER
APPROVE
DRAWING
PREPARED
CHECKED
Suntan
®
APPROVED
Technology Company Limited
Unit I, 4/F., Dormind Industrial Building , 13 Yip Fung Street, Fanling ,N. T., Hong Kong.
http:// www.suntan.com.hk
E-mail:info@suntan.com.hk
Tel : (852) 8202 8782
Fax : (852) 8208 6246
1
Style SPECIFICATION
D max(mm)
T max (mm)
P±1 (mm)
LLmin (mm)
d ±0.05(mm)
25V-Y5V-104M
6
4
5.08
16
0.4
Temperature coefficient and temperature characteristics
Class Ⅰ:
Class Ⅱ, Class Ⅲ
Code
T.C
CH
PH
RH
UJ
SL
NP0
N150
N220
N750
SL
Temperature
characteristic
Y5P
Y5U(Z5U)
Y5V(Z5V)
Letter symbol
P
U(E)
F(V)
/
ClassⅠTemperature coefficient:
YL:-3300PPM/℃
Class Ⅱ temperature characteristics
Suntan
®
Technology Company Limited
Unit I, 4/F., Dormind Industrial Building , 13 Yip Fung Street, Fanling ,N. T., Hong Kong.
http:// www.suntan.com.hk
E-mail:info@suntan.com.hk
Tel : (852) 8202 8782
Fax : (852) 8208 6246
2
Reqirements and method of test and environmental substance
Rated value
Class Ⅰ
ITEM
Operating Temperature Range
-25℃~+85℃
Capacitance
Within the specified range
Dissipation Factor
(tanδ,Q)
Insulation
Resistance
Between
Terminals
Testing method /application
Class Ⅱ
▪Temperature:20℃.
▪Frequency:1±0.1MHz(class Ⅰ);
1±0.1KHz(classⅡ)
▪Measured voltage:1±0.1Vrms.
Less than 3pf:
Q≥400+20C.
30pf or over:
tanδ≤ tanδ≤5%
2.5%.
Q≥
1000(C:Cap)..
class Ⅰ:More than 10000MΩ.
class Ⅱ:More than 4000MΩ.
class Ⅲ: UR≤25V,R≥500MΩ
UR>25V,R≥1000MΩ
▪Applied Voltage:
To be below 500V:Rating Voltage.
Above 500V:500V.
▪Charge Time:60±5sec.
▪Testing Voltage
Withstand
Voltage
Between
Terminals
Between
Exterior
terminals
Capacitance
Temperature
Characteristice
No remarkable abnormality is
Recognized
No remarkable abnormality is
recognized
See
4. (3)
Rate
change
For
Capacitance
Solderability
50V
W.V
R.V
×2.5
1~
2KV
R.V
×2
3KV
R.V×1.5+
500V
4KV~
R.V×1.5
For 1 to 5 sec
The discharge current, however was 50mA or less.
▪The smaller voltage of the rated voltage ×250% or
1.3KV DC was
Applied for 1 to 5 sec
▪Based on items GB/T2693-2001
No remarkable
Abnormality is
Recognized
Externalview
Solder
Heat
Resistance
See
4. (3)
R.V
500
V
R.V
×2.5
Within the
Greater value
Of ±2.5
And ±0.25pf
B:Within ±5%
E:Within ±15%
F:Within ±20%
The lead wire is soldered more
Than 3/4 of it in the
Circumferential direction and to
The immersed part continuously
In the axial direction.
Suntan
®
▪Soldering temperature:260(-0,+5℃)
▪Immersion:10sec.
▪Soldering temp: 230±5℃
or 260±5℃.
▪Immersion time: 2±0.5 sec.
Technology Company Limited
Unit I, 4/F., Dormind Industrial Building , 13 Yip Fung Street, Fanling ,N. T., Hong Kong.
http:// www.suntan.com.hk
E-mail:info@suntan.com.hk
Tel : (852) 8202 8782
Fax : (852) 8208 6246
3
ITEM
External
view
Rate
change
for
capacitance
Humidity
Resistance
Test
Humidity
Resistance
Load Test
Dissipation
Factor
(tanδ,Q)
Enclosure:
Within the greater
Value of ±3.0%
Or ±0.3pf
Lee than 10pf:
Q≥200+10C;
10pf or above &
Less than 30pf:
Q≥275+5/2C;
30pf or more:
Q≥350.
Insulation
Resistance
Externalview
Rate change
For
Capacitance
Dissipation
Factor
(tanδ,Q)
Insulation
Resistance
Externalview
Rate change
For
Capacitance
High
Temperature
Load
Rated value
Class Ⅰ
Class Ⅱ
No remarkable abnormality is
Recognized.
Dissipation
Factor
(tanδ,Q)
Testing method /application
B:Within ±10%
E: Within ±20%
F: Within ±30%
▪Temperature: 40±2℃;
▪Humidity: 90~95% RH;
▪Testing time: 500 (+24,-0hours).
B,E: 5%Max
F: 7.5%Max
More than 1000MΩ
Rated value is the same
Humidity resistance test
Lee than 30pf:
Q≥100+10/3C;
30pf or more:
Q≥200.
B,E: 5%Max
F: 7.5%Max
▪Temperature: 40±2℃;
▪Humidity: 90~95% RH;
▪Testing time: 500 (+24,-0hours);
▪Applied voltage: Rated voltage;
▪The discharge current shall be 50mA Or less.
More than 1000MΩ
No remarkable abnormality is
Recognized.
Within the greater B:Within ±10%
Value of ±3.0%
E: Within ±20%
Or ±0.3pf
F: Within ±30%
Lee than 10pf:
Q≥200+10C;
10pf or above &
B,E: 5%Max
Less than 30pf:
F: 7.5%Max
Q≥275+5/2C;
30pf or more:
Q≥350.
▪Testing time: 1000 (+48,-0 hours);
▪Applied voltage: Rated voltage×200%.(1KV or
more rated voltage×
150%).
▪The discharge current shall be 50mA Or less.
Insulation
More than 1000MΩ
Resistance
Units are coated with phenol and epoxy compound and cured .
R.V
50~500V
Material
Phenol Resin
1KV~
Epoxy Resin
The regulation of environmental pollution materials
Testing Item
Cadmlum (Cd)/CadmlumCompounds
Lead (Pb)/Lead Compounds
Mercury (Hg)/Mercury Compounds
Hexavalent-Chromiun (Cr6+)Compounds
PBBs
PBDEs
Suntan
®
Limited Level
≤100PPM
≤1000PPM
≤1000PPM
≤1000PPM
≤1000PPM
≤1000PPM
Technology Company Limited
Unit I, 4/F., Dormind Industrial Building , 13 Yip Fung Street, Fanling ,N. T., Hong Kong.
http:// www.suntan.com.hk
E-mail:info@suntan.com.hk
Tel : (852) 8202 8782
Fax : (852) 8208 6246
4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising