Compressed Synthetic Air

Compressed Synthetic Air
Safety data sheet
Synthetic Air
Creation date :
Revision date :
1
27.01.2005
02.11.2009
Version : 1.3
IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND
OF THE COMPANY
Product name
Synthetic Air
Trade name
Synthetic Air
Synthetic Air, free of hydrocarbons
Chemical formula Mixture of N2 and O2
Known uses
Not known.
Company identification
Linde AG, Linde Gas Division, Seitnerstraße 70, D-82049 Pullach
E-Mail Adress Direkt@de.linde-gas.com
Emergency phone numbers (24h): 089-7446-0
2
HAZARDS IDENTIFICATION
Risk advice to man and the environment
Compressed gas.
3
COMPOSITION/INFORMATION ON INGREDIENTS
Substance/Preparation: Preparation.
Components/Impurities
Contains the following components:
Oxygen <= 20 %
CAS Nr: 7782-44-7
EINECS Nr.: 231-956-9
EC classification of pure substance:
O; R8
Nitrogen >= 80 %
CAS Nr: 7727-37-9
EINECS Nr.: 231-783-9
EC classification of pure substance:
Not classified as hazardous to health.
4
FIRST AID MEASURES
Inhalation
Not hazardous
Ingestion
Ingestion is not considered a potential route of exposure.
5
FIRE FIGHTING MEASURES
Specific hazards
Exposure to fire may cause containers to rupture/explode. Non
flammable.
Hazardous combustion products
None.
Suitable extinguishing media
All known extinguishants can be used.
Specific methods
Move container away or cool with water from a protected position.
6
ACCIDENTAL RELEASE MEASURES
7
HANDLING AND STORAGE
Handling
Suck back of water into the container must be prevented. Do not
allow backfeed into the container. Use only properly specified
equipment which is suitable for this product, its supply pressure and
temperature. Contact your gas supplier if in doubt.
Storage
DE / E
SDS No. : 9486
page 1 / 2
Observe "Technische Regeln Druckgase (TRG) 280 Ziffer 5" Secure
cylinders to prevent them falling. Keep container below 50°C in a
well ventilated place.
8
EXPOSURE CONTROLS/PERSONAL PROTECTION
Personal protection
Carry working gloves and protection shoes while handling gas
cylinders.
9
PHYSICAL AND CHEMICAL PROPERTIES
General information
Appearance/Colour: Colourless gas.
Odour: None.
Important information on environment, health and safety
Molecular weight: 32 g/mol (O2). 28 g/mol (N2).
Melting point: -219 °C (O2). -210 °C (N2).
Boiling point: -183 °C (O2). -196 °C (N2).
Critical temperature: -118 °C (O2). -147 °C (N2).
Autoignition temperature: Not applicable.
Flammability range: Not applicable.
Relative density, gas: 1,1 (O2). 0,97 (N2).
Solubility mg/l water: 39 mg/l (O2). 20 mg/l (N2).
Maximum filling pressure (bar): 200 bar
10 STABILITY AND REACTIVITY
Stability and reactivity
Stable under normal conditions.
11 TOXICOLOGICAL INFORMATION
General
No known toxicological effects from this product.
12 ECOLOGICAL INFORMATION
General
No known ecological damage caused by this product.
13 DISPOSAL CONSIDERATIONS
General
Do not discharge into any place where its accumulation could be
dangerous. Contact supplier if guidance is required.
EWC Nr. 16 05 05
14 TRANSPORT INFORMATION
ADR/RID
Class
2
Classification Code
UN number and proper shipping name
UN 1956 Compressed Gas, n.o.s. (Nitrogen and Oxygen)
UN 1956 Compressed Gas, n.o.s. (Nitrogen and Oxygen)
Labels
2.2
Hazard number
Packing Instruction
P200
1A
20
IMDG
Class
2.2
UN number and proper shipping name
UN 1956 Compressed Gas, n.o.s. (Nitrogen and Oxygen)
Labels
2.2
Packing Instruction
P200
EmS
FC, SV
9486 / EDV / 02.11.2009
Safety data sheet
Synthetic Air
Creation date :
Revision date :
27.01.2005
02.11.2009
Version : 1.3
IATA
Class
2.2
UN number and proper shipping name
UN 1956 Compressed Gas, n.o.s. (Nitrogen and Oxygen)
Labels
2.2
Packing Instruction
P200
Other transport information
Avoid transport on vehicles where the load space is not separated
from the driver's compartment. Ensure vehicle driver is aware of the
potential hazards of the load and knows what to do in the event of
an accident or an emergency. Before transporting product
containers ensure that they are firmly secured. Ensure that the
cylinder valve is closed and not leaking. Ensure that the valve outlet
cap nut or plug (where provided) is correctly fitted. Ensure that the
valve protection device (where provided) is correctly fitted. Ensure
adequate ventilation. Ensure compliance with applicable regulations.
15 REGULATORY INFORMATION
Number in Annex I of Dir 67/548
Not included in Annex I.
EC Classification
Not classified as hazardous to health.
Labelling
- Symbols
No symbol required.
- Safety Phrases
S9
Keep container in well ventilated place.
DE / E
SDS No. : 9486
page 2 / 2
Further national regulations
Pressure Vessel Regulation
Regulations for the prevention of industrial accidents
Water pollution class
Not polluting to waters according to VwVwS from 17.05.99.
TA-Luft
Not classified according to TA-Luft.
16 OTHER INFORMATION
Wording of risk sentences from chapter 3
R8
Contact with combustible material may cause fire.
RAs
Asphyxiant in high concentrations.
Ensure all national/local regulations are observed. The hazard of
asphyxiation is often overlooked and must be stressed during
operator training. Before using this product in any new process or
experiment, a thorough material compatibility and safety study
should be carried out.
Advice
Whilst proper care has been taken in the preparation of this
document, no liability for injury or damage resulting from its use can
be accepted. Details given in this document are believed to be
correct at the time of going to press.
Further informations
Linde safety adivce
No. 7
Safe handling of gas cylinders and cylinder bundles
No. 11
Transport of gas receptacles in vehicles
End of document
9486 / EDV / 02.11.2009
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising