QT-DK-16_26-3 Hard Code Diable of User Codes

QT-DK-16_26-3 Hard Code Diable of User Codes
≡ SECURITRON QUICK TIP≡
QUICK TIP NUMBER:
QT-DK-16/26-3
PRODUCT:
DK-16 or DK-26 Series Digital Keypads
DESCRIPTION:
It is possible to use the Digital Keypad’s Hard Code
function to lock out all User Codes. This will allow an
individual to effectively lock out all other users. This function could be used for
holidays, snow days, etc. to prevent entry. By entering the Hard Code all User
Codes will be disabled until the Hard Code is reentered.
The first thing that you must do is wire the Digital Keypad as shown below (this is
in addition to wiring for power, locks, etc). You will then need to program at least
one User Code and the Hard Code. While in the Program Mode you will also need
to press in code 75. Code 75 will activate the Hard Code Toggle function. Please
note that the Door Bell Function or any other function involving the programmable
relay will not be available once this function is programmed.
GRN YEL RED BLU WHT BLK GRY BRN BGE ORG PNK VIO
AC IN
F
-
DC IN/OUT
+
DK-16/26
SRC REX UCDHCD NCX CX NOX NC2 C2 NO2 NC1 C1 NO1
Wiring a DK-16 or DK-26 for HARD CODE Disable of all User Codes
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising