K100P Dehumi sPecificAtions
Specifications
Model No.
Height
Width
Depth
Weight
Voltage
Phase
Frequency
Current
Power
Airflow
Noise Level
Refrigerant
Effective Volume
Typical Extraction
Minimum Operating Temperature
Maximum Operating Temperature
K100P
10241HZ-US
17” (431mm)
28” (711mm)
18” (457mm)
138lbs (62kg)
110V
1
60 Hz
16 A
1090 W
700cfm (1190m3/hr)
66 dba
R407c
R22
10,594 cu.ft
(300m3)
97 ppd
33°F (1°C)
95°F (35°C)
Features
Model No.
On/Off Control (Via The Humidistat)
Electronic Defrost Control
Compressor Type
Fitted Mains Plug
Free Standing
Wall Mounting Bracket
(4 = Inc, O = Optional)
Adjustable Control Humidistat
Reverse Cycle Defrost System
High Capacity Water Pump
(20ft Vertical Lift)
High Level Cut-out Switch
Washable Air Filter
Carrying Handles / Skid
Power On Indicator
Epoxy Powder Coating
Gravity Drain (1/2” O/D)
K100P
10241HZ-US
4
4
Reciprocating
4
4
O
4
4
4
4
4
4
4
4
Application
The EIPL K100P is a versatile workhorse, designed to eliminate high humidity problems in harsh environments.
Warehouses, storage rooms, electrical and communications switching stations, locker rooms, basements,
pumping stations, offshore oil rigs and active and laid-up marine vessels have all found this rugged range of
units to be more than adequate for the tasks.
The impressive K100P can be easily moved from site to site, or can be permanently mounted and ducted to suit
a variety of applications.
Key Design Features
• A rugged epoxy-coated, steel chassis.
• A “floating” compressor for vibration and mobility protection.
• An adjustable humidistat, to control the level of dryness desired.
• System lamps to tell the operating status of the
unit at a glance.
• EIPL’s unique “Reverse Cycle” defrosting
system, for effective operation in low
ambient temperatures.
• Standard 115V power requirements
for operation in any location.
K100P Dehumidifier
SPECIFICATIONS
• Washable Air Filter.
• Integral High Capacity Water Pump.
• Rugged, detachable mounting skid.
A FULL RANGE OF HIGH CAPACITY LOW TEMPERATURE
DEHUMIDIFIERS FOR INDUSTRY, INSTITUTIONS, RENTAL HOMES
HOW A DEHUMIDIFIER WORKS
1. Air is drawn into the unit by a fan
2. Air passes over a cold surface
3. As the air is cooled, it’s moisture
condenses
4. Water falls into the container
5. Air is re-heated by the heat
recovery system
Applications
Model No.
Warehouse
Basements
Factories
Sports Halls
Storage Areas
Laboratories
Oil Rigs
6. Air passes back into room 2°C
warmer and considerably dryer
7. Defrost system automatically
de-ices unit as necessary
CONDENSER
WARM
AIR
8. Unit switches off automatically
when container is full
9. When the unit achieves the
selected level of dryness it
switches off automatically
K100P
10241HZ-US
4
4
4
4
4
4
4
Proven Performance
Because of EIPL’s unique “Reverse Cycle” defrosting
feature, the K100P units will function smoothly in
temperatures down to 33°F without frost build-up.
Designed to survive under adverse conditions
and to deliver the goods, this unit will effectively
remove more than ninety pints of airborne water
vapor per day under standard conditions (80°F,
60%RH), and will exceed 20 gallons per day
under extreme conditions found in problem
environments.
Applications
Model No.
Agriculture
Kitchens
Pumping Stations
Hotel / Motel
Stadiums
Ships / Barges
EVAPORATOR
MOIST
AIR
FAN
CAPILLIARY
TUBE
COMPRESSOR
WATER
REFRIGERANT
K100P
10241HZ-US
4
4
4
4
4
4
The Problem
Excess humidity in your crawl space, warehouse,
office, factory or shop results in corrosion, mold
growth and rotting. Enormous costs are incurred every
year through damage to inventory and through inflated
building maintenance costs as a result of dampness.
Even if your building seems dry during the day, at night
when the temperature falls the humidity rises and the
condensation process begins. The compact physical
size and high performance, makes the K100P the ideal
choice.
The Dehumidifier
EIPL dehumidifiers are effective solutions to environmental control problems. The K100P range
of units are high capacity dehumidifiers, made to operate at high efficiencies by removing
moisture from the air through the refrigeration process. The fan draws the moist air through
the cold evaporator coil, which cools the air below its dew point. Moisture forms on
the evaporator coil and is collected in the condensate tray, which is equipped with
an internal condensate pump for easy removal of collected moisture. The cooled
air then passes through the hot condenser coil where it is reheated using the same
energy removed during the cooling phase, plus the additional heat generated
by the compressor. The air is, therefore, discharged from the dehumidifier at
a slightly higher temperature with a lower absolute humidity than that
which entered. Continuous circulation of air through the dehumidifier
gradually reduces the relative humidity within the area. Because the
K100P range of units are equipped with an internal humidistat,
they automatically switch on and off to save energy
and expense by maintaining the desired level of
humidity with intermittent operation.
Ebac Industrial Products Incorporated, 700 Thimble Shoals Blvd.
Suite 109, Newport News, VA 23606-2575
Pure n Natural Systems, Inc. www.purennatural.com 1-800-237-9199
Tel: (757) 873-6800 Fax: (757) 873-3632 www.ebacusa.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising