2010 Product Line Catalog Electronic Access Control

2010  Product Line Catalog Electronic Access Control
2010 Product Line Catalog
Electronic Access Control
Locksets
Now Part of
All these brands are now under one name.
1
Electronic
access
control
locksets
With thousands of units in operation worldwide, IEI locksets are recognized
for the highest level of quality and reliability. Combining field proven keypad
technology with a Grade 1 lockset that features metal alphanumeric Braille
keys, UV conformal coated electronics and a neoprene gasket, the LS Series
UL listed Locksets are rugged and provide true indoor/outdoor durability. LS
Series Electronic Access Control Locksets provide the value and accountability
of access control where traditional locks and keys were used in the past.
The LS Series locksets are available in a variety of lock configurations to
accommodate customer applications. Special order finishes are available
to meet most architectural requirements. The LS Series are simple to install
with only one additional 1 inch hole (model dependent) where existing locks
were installed. For added protection the LS Series provide a through-door
wire raceway preventing wire chaffing and additional protection from
moisture related failures.
There are three different functional variations of LS series locksets to choose
from. The LS1 stores up to 120 users and is programmable from the
keypad. The LS2 & LS2P models use the Hub Manager Professional Software
program to manage people and doors through step-by-step wizard assisted
configuration and easy to use management reports and have full functionality
of traditional access system.
Locksets
4
Lock Types
6
Finishes & Options
8
Dimensions
8
Order Guide
9
LS Series
Locksets
LS1
Providing the combination of access control protection, and an ANSI Grade-1 lockset, the
LS1 series locksets are a perfect choice to manage door access that may otherwise not be
available through traditional hardwired access systems. The access decisions are made at the
door and access is granted to those that have a valid PIN programmed into the LS1.
FEATURES
• Non-volatile eeprom memory allows in-shop programming
• One non-handed unit for both indoor and outdoor applications
• Wire raceway provides clean installation and protects wires inside door
• Programs the same as all IEI products
• Durable alphanumeric Braille keys
• Selective Lockout of grouped of users
• Passage/Toggle codes allow door to remain unlocked
• Service codes allow one-time entry then are deleted
automatically
• Error Lockout for successive invalid attempts
• Two-stage Low Battery Alert assures entry
• Propped Door and Forced Door alerts when used with a
normally open magnetic switch
• Request to Exit allows door to be unlocked from a distance
Compliance
ANSI 156.2, Series 4000 Grade 1
Federal Handicap and ANSI A117.1 Accessibility Code
Federal FF-H-106C
California: (Formerly Title 19, State Fire Marshall)
Environmental
Electronics sealed in conformal coating process
Through door wire raceway reduces wire exposure to moisture
Neoprene gasket seals exterior housing
-20F to 120F, up to 98% humidity (non-condensing)
Electrical
Power: 4 AA alkaline batteries
Cycles: Up to 150,000
04
Electronic Access Control Locksets
Electronic Access Control Locksets
LS2 & LS2P
The full featured LS2 & LS2P series locksets provide large system features from an at the door solution.
The LS2 & LS2P series locksets are a perfect choice to manage door access that may otherwise not be
available through traditional hardwired access systems. The LS2 & LS2P series locksets use an ANSI
Grade-1 lockset and the powerful management capabilities of the Hub Manager Professional software.
FEATURES
• 2,000 individual users per lockset
• 2,000 transactions stored per lockset
• Wireless lockset programming and audit trail retrieval
with PDA running Palm OS version 3.5 or newer
• Managed with Hub Manager Professional Software
version 4 or higher
• Unlimited Access Levels including Time Zones and Holidays
• 20,000 users per system
• Unlimited Sites
• Import user names
ELECTRONIC ACCESS
CONTROL LOCKSETS
LS2P:
• Reads HID proximity cards and fobs up to 37-bit
• Users can be Code, Card, Code and Card, Code or Card
Compliance
ANSI 156.2, Series 4000 Grade 1
Federal Handicap and ANSI A117.1 Accessibility Code
Federal FF-H-106C
California: (Formerly Title 19, State Fire Marshall)
Environmental
Electronics sealed in conformal coating process
Through door wire raceway reduces wire exposure to moisture
Neoprene gasket seals exterior housing
-20F to 120F, up to 98% humidity (non-condensing)
Electrical
Power: 4 AA alkaline batteries
Cycles: Up to 90,000
Data Transfer Device (DTD)
Each lockset can be wirelessly programmed through infrared
(IR) signals with the Model DTD Data Transfer Device or via
select IR equipped PDAs. User codes, access privileges,
lockset programming, and transaction history can be
transferred between the lockset and a PC running Hub
Manager Professional software, which also provides in-depth
management reports of people and door activity.
Electronic Access Control Locksets 05
LS Series
Lock Type
See Order Guide 2 - page 45
Cylindrical
This lockset easily retrofits into an ANSI 151.8 prepared
door and requires only one additional 1” hole for
installation.
features
• Lock Body: Grade 1 Cylindrical Lockset w/ clutch
mechanism
• Latch: Grade 2, 3 hour fire rating reversible with 1/2”
throw, 23/4” backset
• Strike Plate - 2 3/4” “T” strike
• Door Thickness: 1 5/8” to 1 7/8”. 1 3/8” with optional
spacer kit
• Cylinder: Solid Brass Schlage “C” keyway, 6 pin,
with (2) nickel silver keys
• Optional Cylinders: I/C Core Prep Lever to accept
OEM cylinders (see configuration guide for details)
Mortise
This lockset retrofits most ANSI 115.1 Mortise prepared
doors with the additional of (2) through holes. The LS
Series Mortise lockset can be easily installed in a door
with an existing mortise lock.
features
• Lock Body: Grade 1 Mortise Lock body
• Latch: Stainless Steel Latchbolt with 3/4” projection
1/2” Throw Deadlocking latch
• Door Thickness - 1 3/4” to 2 1/4”
Handing: Field reversible on Crescent and American
handles.
• Cylinder: Solid Brass 1 1/8” Schlage “C” keyway, 6 pin
mortise cylinder, with (2) nickel silver keys. 1 1/8” and
2” can be used with optional spacers
• Optional Cylinders: see configuration guide for details
06
Electronic Access Control Locksets
Electronic Access Control Locksets
Exit
Allows the LS Series locksets to be installed in door
applications requiring emergency egress exit bar.
Easily installs requiring only (2) additional through holes.
Exit bar supplied by others.
features
• Door Thickness: 1 3/4” to 2 1/4”
• Cylinder: Solid Brass 1 1/8” Schlage “C” keyway, 6 pin
mortise cylinder, with (2) nickel silver keys. 1 1/8” and
2” can be used with optional spacers
• Optional Cylinders: see configuration guide for details
• Requires Exit Device Mounting Kit: see configuration
guide for details
• Also compatible with Rim panic devices, surface horizontal
rod devices. Contact factory for installation instructions for
these applications
ELECTRONIC ACCESS
CONTROL LOCKSETS
Deadbolt
This lockset retrofits most ANSI 115.1 Mortise with
Deadbolt prepared doors with the additional of (2)
through holes. The LS Series Deadbolt lockset can
be easily installed in a door with an existing mortise
and deadbolt lock.
features
• Lock Body: Grade 1 Mortise Lock body with Deadbolt
• Latch: Stainless Steel Deadbolt with 1” projection,
latchbolt with 1” projection and deadlocking latch.
Deadbolt may be projected from option 1 3/4” mortise
cylinder with cover cam or thumb turn from inside door
• Door Thickness: 1 3/4” to 2 1/4”
• Privacy Setting feature available
• Cylinder: Solid Brass 1 1/8” Schlage “C” keyway, 6 pin
mortise cylinder, with (2) nickel silver keys. To project
deadbolt from outside door requires a 1 3/4” mortise
cylinder. 1 1/8” and 2” can be used with optional
spacers and a straight cam
• Optional Cylinders: see configuration guide for details
Electronic Access Control Locksets
07
LS Series
LS Series Options
See Order Guide 3 - page 45
See Order Guide 4 - page 45
Finishes:
Lever Choices:
See Order Guide 5 - page 45
Cylinder Types:
The standard cylinder is a solid brass Schlage “C” keyway
installed in the lockset body or handle.
3 - Polished Brass / US3
For field installation of commonly available OEM lock cylinders,
Cylindrical locksets can be ordered with an I/C core prep lever
(no cylinder in the lockset lever). Mortise, Exit, and Deadbolt
locksets can be ordered with no cylinder in the lockset body.
See Cylinder Type options in Step 5 of the Order Guide.
10 - Dark Bronze / US10B / 613
26D - Brushed Chrome / US26D
LS Series Dimensions
Data Transfer Device
Hand-held Model DTD DATA TRANSFER DEVICE for wireless
infrared (IR) transfer of data and retrieval of stored events from
the software managed prox.pad plus IR and LS2P Series
wireless access control locksets. Data is saved to an internal
memory for transfer to a PC via USB connection. Powered by
4 “AA” batteries. Includes Hub Manager Professional software,
USB cable & batteries.
features
• Infrared hand held communication
• Battery powered
• Works with the LS2 & LS2P access control locksets
08
Electronic Access Control Locksets
Standard
Schlage “C”
Keyways
Electronic Access Control Locksets
Order Guide
The model number determines the lockset options.
Order using these easy steps
4 Select Lever Type
2 Select Lock Type
lever
CR - Crescent lever
Lock TYPE
C-Cylindrical Lockset
M- Mortise Lockset
D- Mortise Lockset w/ deadbolt
E- Exit Trim
(not available for Schlage IC core prep)
AM - American lever
KN- Knob
(cylindrical lock type only, special order
consult factory)
LS2P C 26D CR – ICB
1 Select LS Model Type
5 Select Cylinder Type
3 Select Finish Type
FINISH
Alternate Finish Orders (model LS2 & LS2P only)
consult factory for availability and pricing.
3 - Polished Brass / US 3
10 - Dark Bronze / US 10B / 613
26D - Brushed Chrome / US 26D
special Hardware Orders
Minimum order quantities may be required,
consult factory for availability and pricing
B2 - 2–3/8˝ Backset Latch
B3 - 3–3/4˝ Backset Latch Extender
B5 - 5˝ Backset Latch Extender
S2 - 2–3/4˝ T Strike
REX - Request To Exit Option In Handle
SO - Solid Exterior Lever
cylinder type
Blank -Schlage C (standard)
*ICB - SFIC Best (specify 6 or 7 pin)
*ICY - RC Yale (specify 6 or 7 pin)
*ICC - RC Corbin (specify 6 or 7 pin)
*ICG - RC Schlage (6 pin only)
*ICS - RC Sargent (6 pin only)
LC - No cylinder
*For cylindrical locksets only
exit trim adapter plates
Von Durpin 99
LSEVD
Precision 1100
LSEP
Yale 7100 & Corbin ED5200
LSEYC
Dorma 9300
LSED
Sargent 8800 & Arrow 3800
LSESA
0270001
0270002
0270003
0270004
0270005
Electronic Access Control Locksets 09
ELECTRONIC ACCESS
CONTROL LOCKSETS
LS Model Type
ls1
ls2
ls2p
All these brands are now under one name.
Linear LLC | 1950 Camino Vida Roble | Suite 150 | Carlsbad, CA 92008 | 800.421.1587 | www.linearcorp.com
P924
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising