1ER85C Spec Sheet
Item #
C.S.I. Section 11420
F R Y E R S
1ER85 SERIES
FREE STANDING ELECTRIC FRYERS
1ER85A Solid state analog knob controls.
1ER85D Solid state digital controls.
1ER85C Programmable computer controls.
STANDARD FEATURES
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
Stainless steel front and sides.
Four 6" adjustable legs.
16 gauge stainless steel fry tank, 85 lb. capacity.
Ten year limited fry tank warranty.
11⁄4" full port ball type drain valve.
24 kW low watt density ribbon style heating elements.
Multiple fat melt modes.
High limit control.
Twin fry baskets with plastic coated handles.
One year limited parts and labor warranty.
CONTROLS
Model 1ER85C
Shown with caster accessory
1ER85A
Solid state analog knob control. Accurate temperature
control 200°F to 390°F within +/- 2°. Multiple fat melt
modes, fast recovery.
1ER85D Solid state digital read temperature control. Accurate
temperature control 200°F to 390°F within +/- 2°.
Multiple fat melt modes, fast recovery, boil out
mode and two countdown timers.
SPECIFICATIONS
Electric deep fat fryer, Vulcan-Hart Model No. 1ER85A: Solid
analog state knob, 1ER85D: Solid state digital, 1ER85C: Computer
temperature controls are adjustable from 200° to 390°F and include
3 melt cycle and high limit control. Stainless steel cabinet with
four 6" adjustable legs. 16 gauge stainless steel fry tank holds 85
lbs. of frying compound. 11⁄4" full port ball type drain valve. 24 kW
low watt density ribbon style heating elements. Twin fry baskets.
Power supply is 208 volt, 50/60 Hz, 3 phase.
1ER85C Computer control digital read temperature control.
Accurate temperature control 200°F to 390°F
within +/- 2°. Multiple fat melt modes, fast recovery
and boil out mode. Ten programmable product
key sand ten countdown timers. Secondary and
advanced programming options.
OPTIONAL FEATURES (Factory Installed)
480 volt, 3 phase. (Separate 120 volt, 20 amp electric
supply required.)
Second year extended limited parts and labor warranty
Overall Dimensions:
21"w x 341⁄ 8"d x 411⁄ 16"h working height is 361⁄4"
ACCESSORIES (Packaged & Sold Separately)
NSF listed. CSA design certified.
Stainless steel tank cover - doubles as a work surface top
Set of four 6" adjustable casters (2 locking).
Extra set of twin fry baskets – 91⁄4"w x 151⁄4"d x 6"h
Large single fry basket – 183 ⁄4"w x 151⁄4"d x 6"h
Frymate™ VX21S dump station
Connecting Kit(s) – connect two fryers together (banking
strip, brackets and hardware)
10" high stainless steel removable splash guard
Specify voltage when ordering.
a division of ITW Food Equipment Group LLC
P.O. Box 696 F32901 (05/10)
■
Louisville, KY 40201 ■
Toll-free: 1-800-814-2028 ■
Local: 502-778-2791 ■
Quote & Order Fax: 1-800-444-0602
F R Y E R S
1ER85 SERIES
FREE STANDING ELECTRIC FRYERS
INSTALLATION INSTRUCTIONS
1. An adequate ventilation system is required for Commercial
Cooking Equipment. Information may be obtained by writing to
the National Fire Protection Association, Batterymarch Park,
Quincy, MA 02269. When writing refer to NFPA No. 96.
SERVICE CONNECTIONS:
NEMA 5-15P, 120 volt, 60 Hz, 1 phase electrical connection
required for 480 volt fryers. Not supplied with fryer.
2. All models require a 6" clearance at both sides and rear adjacent
to combustible construction.
NOTE: In line with its policy to continually improve its product,
Vulcan reserves the right to change materials and specifications
without notice.
3. All models require a 16" (407 mm) minimum clearance to adjacent
open top burner units.
4. This appliance is manufactured for commercial installation only
and is not intended for home use.
21.000
54.687
(1389)
3.375
21.000
53.331
(1355)
39.437
(1002)
35.78
(909)
34.146
25.250
(641)
6.00
(152)
21.750
(552)
34.519
(877)
.938
19.187
ELECTRICAL CHARACTERISTICS
Model
Number
Total kW
Connection
1ER85
24
Nominal Amps per Line Wire
3 PH Loading
kW per Phase
3 Phase
208 volt
480 volt
X-Y
X-Z
X
208 volt
Y
Z
X
480 volt
Y
Z
8
8
67
67
67
29
29
29
This appliance is manufactured for commercial use only and is not intended for home use.
a division of ITW Food Equipment Group LLC
P.O. Box 696 F32901 (05/10)
■
Louisville, KY 40201 ■
Toll-free: 1-800-814-2028 ■
Local: 502-778-2791 ■
Quote & Order Fax: 1-800-444-0602
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising