P3 Press and Micro

P3 Press and Micro
SERIES P3
™
PNEUMATIC HAND PRESS
The PEMSERTER® Series P3 fastener installation
press is a portable power hand tool weighing only
4.6 kg. that can develop a squeezing force of
22.2kN.
Specifications
With the PEMSERTER Series P3 press,
you can easily install self-clinching nuts
and studs in metric or unified sizes. The
press kit contains punches and anvils to
install nuts (S, CLS, and CLA) ranging from M2
thru M4 thread sizes and studs (FH, FHS, and FHA
up to 12mm in length) ranging from M2.5 thru M4
thread sizes.
Ram Force
Pressure System Type
Up to 22.2 kN
Pneumatic
Air Requirements*
6 to 7 BAR
Throat Depth
7.6 cm
Length
40.6 cm
Yoke Depth
15.8 cm
Weight
4.6 kg
*1 psi = 0.07 bar. 1 bar = 14.5 psi.
0.48 cm
Features and Benefits
 Pneumatic power for consistency and simple 7.6 cm
4.5 cm
11.7 cm
4.06 cm




0.48 cm
14.45 cm
2.54 cm
Specifications subject to change without notice.
Check our website for the most current version of this bulletin.

operation. Requires shop air only.
Trigger controlled safety.
Snap-in tooling changeover.
Press includes metric or unified
tooling.
Can be bench-mounted. Back side of
yoke has two predrilled and tapped
holes for bench mounting.
Mounting bracket hardware
included.
One-year parts warranty.
© 2008, PennEngineering
PSP3_MM-408
Rev. 413
MICRO-MATE
HAND TOOL
The PEMSERTER® MICRO-MATE® press is a versatile
hand tool weighing only 1.25 kg that can develop a
squeezing force of 1,134 kg.
Features and Benefits
 Equipped with punches and dies to punch fastener mounting holes in metal sheets.
The press kit contains one hand tool, one flat punch,
seven punches and dies, one punch adapter bushing,
one edge-depth guide, five fastener anvils and a
storage case. The kit installs nut sizes M2 to M5.
 Changes to a flat punch and recessed anvil to 

Specifications subject to change without notice.
Check our website for the most current version of this bulletin.
easily install metric or unified self-clinching nuts.
Ideal for prototype shops or short production runs.
One-year parts warranty.
© 2008, PennEngineering
PSP3_MM-408
Rev. 413
®
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising