03 Climasys Thermal Management System Universal Enclosures Catalogue 2010

03 Climasys Thermal Management System Universal Enclosures Catalogue 2010
Climasys Thermal
Management System
Schneider Electric Universal Enclosures
2009
Schneider Electric Universal Enclosures
The specialist in sealed equipment
What is the mission of Schneider Electric Universal Enclosures?
> Schneider Electric Universal Enclosures has the mission to develop and be in charge of the Universal
Enclosure Business for the Schneider Electric Group.
> Schneider Electric Universal Enclosures is based on two historical companies created in 1958, Himel with
origin in Spain and Sarel with origin in France. Both companies have developed more than 50 years of
experience in the design, manufacturing and marketing of universal enclosures systems.
> Himel and Sarel brands are going to migrate within Schneider Electric which is an ambitious corporate
project that will make everyone’s day-to-day work easier, both clients and collaborators.
Why do we migrate our brands?
Here are some of the benefits of working with a single brand:
> Our daily work will be simpler, it is easier to deal with a single brand and with common documentation and
resources.
> Your clients will recognize our product offer and ranges better thanks to a single packing and
communication focused on Schneider Electric.
> It will be much easier to create solutions based on the products of a single brand.
What is good for Schneider Electric is also good for our clients and collaborators!
> The scope of this guide is limited to the ranges migrating last quarter of 2009. These ranges are
Floor Standing, Control Desks, Thermal offer, Stainless Steel and Plastic Industrial Boxes.
Customer needs
Brand migration
Schneider Electric
Solutions
How will be the migration process?
The migration process of the ranges in the scope of this guide will be conducted in a range-by-range basis
during the last quarter of 2009, and each one of the range migrations will be performed in two phases:
Phase 1: new packing
This phase began in the second half of 2009, and will focus on harmonizing the packing with
Schneider Electric.
Phase 2: new product marking
As of the fourth quarter of 2009, some product families will start to carry the Schneider Electric logo. This
process will be performed progressively range by range.
> To guarantee a global offer and a harmonized coding and marking system, we are also going to change our
references for all our ranges.
ClimaSys
Thermal management system
Thermal conditioning of
electric and electronic switchboards: a need
What is thermal control?
Technological evolution
The miniaturisation of components, the generalisation of electronics and the
appearance of new electronically powered products have made temperature
management into a growing need which must necessarily be considered when
designing electrical and/or electronic switchboards.
What are the advantages of efficient thermal management?
Thermal management of electrical switchboards is a major factor for industrial
maintenance.
Many risks are incurred by not having a suitable thermal solution, which can affect
the service life of the components and the performance of the facilities to the extent
of causing a halt in production.
The service life of the components also depends on the temperature and humidity
conditions inside the enclosure. The ideal values range from +25 to +35 ºC
for the temperature and 40 to 60 % for the relative humidity (RH).
Cooling, heating, controlling
For the same reasons as the IP/IK protection ratings, equipment installed in
enclosures requires suitable thermal protection.
Various solutions to these problems have been put forward. They will be chosen
according to environmental conditions, the type of components in the electrical
switchboard, etc.
In certain cases, it is sufficient to oversize the enclosure, use fans or air-air
exchangers, etc. In other cases, where the ambient temperature is higher, it
becomes necessary to install air-water exchangers or cooling units.
A solution for each need
We provide a complete Thermal offer to secure your installations.
Cooling
1. Forced ventilation systems
2. Air-air exchangers
3. Air-water exchangers
4. Cooling units
Heating
5. Resistance heaters
Controlling
6. Thermal control accessories
Calculating
7. New Spacial.clim software
3
ClimaSys
Choose the solution
A thermal solution for every
environment
Ventilation systems with filters
Specially recommended for installations in which:
• The ambient temperature is lower than the desired temperature inside the
enclosure.
• A high protection rating is required: IP 54 or IP 55.
• The surrounding environment is relatively clean, allowing air to enter the
enclosure.
Large range of solutions
• 42 possible combinations.
• Colours: RAL 7035 as standard, with the option of changing to RAL 7032
(with replacement grille NSYCAGpppLPC).
• 38 to 850 m3/h.
• According to 5 input voltages:
AC: 400/440 V, 230 V, 115 V (50/60 Hz),
DC: 48 V and 24 V.
• Broad range of accessories (filters, IP 55 & EMC covers, anti-vandalism kit).
Air-air exchangers
Specially recommended for installations in which:
• The ambient temperature is lower than the desired temperature inside the
enclosure.
• A high protection rating is required: IP 54 or IP 55.
• The outside environment is highly polluted.
Large range of solutions
•
•
•
•
4 models.
Two installation versions: top-mounting model and side-mounting model.
Cooling power from 15 to 70 W/ºK .
According to the input voltage: 230 V (50/60 Hz).
Air-water exchangers
Specially recommended for installations in which:
• The ambient temperature is higher than the desired temperature inside the
enclosure.
• The outside environment is corrosive, the internal and external air circuits are
independent.
• The outside environment is highly polluted, the temperature is controlled by cold
water without requiring the use of an external air circuit.
• It is necessary to extract the heat produced by the industrial site.
Large range of solutions
•
•
•
•
4
3 models.
Two installation versions: top-mounting model and side-mounting model.
Cooling power of 2,100 W and 3,150 W.
According to the input voltage: 230 V (50/60 Hz).
ClimaSys
Choose the solution
A thermal solution for every
environment
Cooling units
They control the temperature inside the enclosure in order to guarantee the correct
operation of the components, regardless of the outside temperature, by separating
the internal and external air circuits and reducing the humidity of the enclosure.
A very broad range of solutions
•
•
•
•
•
32 models.
Two versions: top-mounting model and side-mounting model.
Cooling power from 240 to 4,000 W.
Two control versions: electronic and mechanical.
According to the input voltage: 230 V (50/60 Hz);
3 400/440 V (50/60 Hz); 115 V (50/60 Hz).
• Three installation types: surface, flush and partial flush (SLIM version).
• RAL 7035 and stainless steel.
Resistance heaters
With a double objective:
• To prevent the formation of condensation inside the enclosure.
• To reheat the electrical switchboard when the temperature is too low for the
components to operate correctly.
Large range of solutions
•
•
•
•
•
30 models.
Insulated or aluminium versions.
Versions with natural convection or fan.
Cooling power from 10 to 1,200 W.
According to the input voltage: 12 V to 450 V AC/DC.
Thermal control
Thermostats maintain the temperature inside the enclosure and send a signal when
certain defined values are exceeded:
• Maximum value (cooling action).
• Minimum value (reheating action).
Range of solutions
•
•
•
•
11 models.
Temperature control: adjustable thermostats; single or double.
Relative humidity control: adjustable or fixed hygrostat.
Temperature and relative humidity control: adjustable hygrotherm.
Calculation assistance: Spacial.clim
We offer our customers and users a software application to help them select
thermal accessories.
The programme draws up a heat balance and defines the best ventilation or cooling
solution for the inside of the enclosure.
5
ClimaSys CV
Ventilation system
Selection guide
Ventilation systems with filters
Fan flow rate (m3/h)
IP 54
IP 54
IP 54
IP 54
IP 20
IP 33
Free
with filter
With
1 outlet
grille
With
2 outlet
grilles
50 Hz
50 Hz
50 Hz
38
25
33
Dimensions (mm)
Reference
Voltage
Total
(external)
Fan with filter
Cut-out
230 V
38
27
35
115 V
58
39
47
24 V CC
137 117
92 92
RAL 7032
NSYCVF38M115PF
NSYCAG92LPF
NSYCAG92LPC
NSYCAG125LPF
NSYCAG125LPC
NSYCAG223LPF
NSYCAG223LPC
NSYCAG291LPF
NSYCAG291LPC
NSYCVF38M24DPF
44
34
41
48 V CC
63
71
230 V
NSYCVF85M230PF
79
65
73
115 V
NSYCVF85M115PF
80
57
77
24 V CC
NSYCVF38M48DPF
170 150
125 125
NSYCVF85M24DPF
79
59
68
48 V CC
NSYCVF85M48DPF
165
153
161
230 V
NSYCVF165M230PF
164
153
161
115 V
NSYCVF165M115PF
188
171
179
24 V CC
NSYCVF165M24DPF
193
302
302
171
260
263
179
268
271
48 V CC
230 V
115 V
262
221
229
24 V CC
NSYCVF300M24DPF
247
210
218
48 V CC
NSYCVF300M48DPF
562
582
473
485
481
494
230 V
115 V
NSYCVF560M230PF
NSYCVF560M115PF
838
983
931
718
843
798
728
854
809
230 V
115 V
400/440 V
268 248
115 V
230 V
54
Colour kit
NSYCVF38M230PF
85
65
Outlet grille
RAL 7035
230 V
223 223
336 316
291 291
124 124
Ø108
120 120
94 96
NSYCVF165M48DPF
NSYCVF300M230PF
NSYCVF300M115PF
NSYCVF850M230PF
NSYCVF850M115PF
NSYCVF850M400PF
NSYCVF65M115PF (1)
NSYCVF65M230PF (1)
NSYCAG108LP (1)
NSYCVF54M230MM2
(2)
(1) Black colour.
(2) Integrated in the kit.
Sealing cover IP 55 and EMC
Dimensions (mm)
EMC
Cover reference
Cover reference
External
Cut-out
Aluzinc
RAL 7035
Stainless
steel 304
Aluzinc
RAL 7035
240 180 60
350 305 80
350 305 80
430 373 105
430 373 105
125 125
223 223
223 223
291 291
291 291
NSYCAP125LZF
NSYCAP223LZF
NSYCAP223LZF
NSYCAP291LZF
NSYCAP291LZF
NSYCAP125LXF
NSYCAP223LXF
NSYCAP223LXF
NSYCAP291LXF
NSYCAP291LXF
NSYCAP125LE
NSYCAP223LE
NSYCAP223LE
NSYCAP291LE
NSYCAP291LE
Anti-vandalism kit
• Prevents the grille from being opened from the outside.
• The unlocking thumbwheel is accessed from the inside of the wall-mounting
enclosure.
• RAL 7011 colour (same material as the grille: ASA PC).
6
Minor packaging
Reference
2
NSYCAAPV
Ventilation systems
ClimaSys CV
Natural airing
Anti-insect filters for metal louvre plate, square
• Installation is made between the enclosure and the metal louvre.
• Material: Stainless steel 304L < 0.32 mm wire mesh, of 1.07 mm, thickness
0.6 mm.
• Increases protection rating to IP 33.
• Weight: 0.8 kg/m2.
• Supply: one anti-insect filter.
Louvre plate reference
External dimensions (mm)
NSYCAG104X95LM
NSYCAG130X110LM
NSYCAG170X190LM
98 115
133 158
197 215
Filter reference
NSYCAF104X95X
NSYCAF130X110X
NSYCAF170X190X
Plastic ventilation louvres
• Four models available according to IP rating, in vertical position.
• Supply: 2 plastic ventilation louvres.
cut-out =
NSYCAG45LP
45.5 mm
35 mm
38 mm
33 mm
19 mm
NSYCAG33LP
IP
Reference
22
30/44 (1)
45
44
45
NSYCAG45LP
NSYCAG35LP
NSYCAG38LP
NSYCAG33LP
NSYCAG19LP
(1) According to installation in the Thalassa enclosure.
Hood for natural airing, IP 54
• Natural airing device for coupling to the top of metal
floor-standing enclosures.
• Solution for combining with the ventilation slots.
• Fixing to the top by means of caged nuts and special screws.
• Material: steel.
• Finish: painted with epoxy-polyester resin, textured RAL 7035 grey.
• Protection rating: IP 54.
• Weight: 4.6 kg.
• Supply: one hood for natural airing and fixing elements.
Reference
NSYCAC228RMF
Top hood with top fan IP 54
•
•
•
•
Fan with hood, for floor-standing enclosures.
Device delivered with fixings and connection terminal block.
Electric power: 85 W.
A flow rate of 350 m3/h is obtained with an outlet grille ref. NSYCAG291LPF,
(cut-out 291 291 mm).
• Noise level: 64 dB (A).
• Installation and removal from the outside.
Flow rate* (m3/h)
Voltage (V)
570
115
575
230
* Flow rate measured without counter-pressure.
Weight (kg)
Reference
5.8
5.8
NSYCVF570M115MF
NSYCVF575M230MF
7
ClimaSys CU
Cooling unit
SLIM electronic control
SLIM for perfect integration
+
1 bloc:
• 4 power levels
• 3 voltage levels
=
1 cover:
• Flush
• Partial-flush
• Surface
66 models, from 1,100 to 2,700 W,
115 to 460 V, flush mounting,
partial-flush mounting or surface
mounting, with or without electronic
display, IP 55, UL compliant.
Minimum depth
162 mm
Depth
All the models of the SLIM range have a depth of 162 mm to maximise the volume
inside the enclosure.
Modular system
• There are 66 possible combinations with only 17 catalogue references.
• Three different installation types are possible with the same air-conditioning unit
(surface, partial flush and flush).
Power ranges
1,100 W, 1,500 W, 2,200 W and 2,700 W.
Versions
• RAL 7035 and stainless steel.
• Option to provide other colours on demand.
Internal IP 55
The SLIM range is supplied as standard with an expanded polyurethane gasket,
ensuring optimum sealing with IP 55 throughout the enclosure.
8
ClimaSys CU
Cooling unit
Selection guide
SLIM electronic control models (modular)
• Flush mounting.
• Partial-flush mounting.
• Surface mounting.
Power
1,100 W
1,500 W
2,200 W
2,700 W
Cooling unit block
230 V
400-460 V (50-60 Hz)
115 V
NSYCUB1100W230S
NSYCUB1100W400S
NSYCUB1100W115S
NSYCUB1500W230S
NSYCUB1500W400S
NSYCUB1500W115S
NSYCUB2200W230S
NSYCUB2200W400S
NSYCUB2200W115S
NSYCUB2700W230S
NSYCUB2700W400S
Covers
Side-mounting type
Reference
Surface-mounting
Partial flush-mounting
Flush-mounting
Surface-mounting
Partial flush-mounting
Flush-mounting
NSYCUCL
NSYCUCH
NSYCUCF
NSYCUCLX
NSYCUCHX
NSYCUCFX
RAL 7035
Stainless-steel
!
Modular version: Always order one SLIM cooling unit reference plus one cover reference.
Side-mounting models
External
dimensions (mm)
Cooling power EN 14511
L35 - L35 (50 Hz)
Input voltage
Vol-Hz
Control
Reference
450 350 140
240 W (819 Btu/h)
230 V - 50/60 Hz
Thermostat
NSYCU240W230VL
620 300 170
370 W (1263 Btu/h)
230 V - 50/60 Hz
Thermostat
NSYCU370W230VL
800 350 195
760 W (2594 Btu/h)
230 V - 50/60 Hz
Thermostat
NSYCU760W230VL
900 400 195
1,050 W (3584 Btu/h)
230 V - 50/60 Hz
Thermostat
NSYCU1050W230VL
1,010 400 240
1,100 W (3755 Btu/h)
230 V - 50/60 Hz
Electronic controller
NSYCUE1100W230L
1,010 400 240
1,400 W (4780 Btu/h)
230 V - 50/60 Hz
Electronic controller
NSYCUE1400W230L
1,010 400 240
1,400 W (4780 Btu/h)
3 400 V 50 Hz / 440 V 60 Hz
Electronic controller
NSYCUE1400W400L
1,000 400 220
1,650 W (5631 Btu/h)
230 V - 50/60 Hz
Thermostat
NSYCU1650W230VL
1,000 400 220
1,800 W (6143 Btu/h)
3 400 V 50 Hz / 440 V 60 Hz
Thermostat
NSYCU1800W400VL
1,010 400 240
1,800 W (6145 Btu/h)
3 400 V 50 Hz / 440 V 60 Hz
Electronic controller
NSYCUE1800W400L
1,406 502 300
2,500 W (8533 Btu/h)
3 400 V 50 Hz / 440 V 60 Hz
Thermostat
NSYCU2500W400VL
1,406 502 300
4,000 W (13652 Btu/h)
3 400 V 50 Hz / 440 V 60 Hz
Thermostat
NSYCU4000W400VL
Top-mounting models
External
dimensions (mm)
Cooling power EN 14511
L35 - L35 (50 Hz)
Input voltage
Vol-Hz
340 600 350
760 W (2594 Btu/h)
230 V - 50/60 Hz
Thermostat
NSYCU760W230VR
400 700 400
1,050 W (3584 Btu/h)
230 V - 50/60 Hz
Thermostat
NSYCU1050W230VR
415 750 412
1,400 W (4780 Btu/h)
230 V - 50/60 Hz
Electronic controller
NSYCUE1400W230R
400 700 400
1,460 W (4983 Btu/h)
230 V - 50/60 Hz
Thermostat
NSYCU1460W230VR
430 700 400
1,650 W (5631 Btu/h)
230 V - 50/60 Hz
Thermostat
NSYCU1650W230VR
415 750 412
1,800 W (6145 Btu/h)
3 400 V 50 Hz / 440 V 60 Hz
Electronic controller
NSYCUE1800W400R
430 700 400
2,000 W (6826 Btu/h)
3 400 V 50 Hz / 440 V 60 Hz
Thermostat
NSYCU2000W400VR
470 800 450
2,450 W (8362 Btu/h)
3 400 V 50 Hz / 440 V 60 Hz
Thermostat
NSYCU2450W400VR
470 800 450
3,100 W (10580 Btu/h)
3 400 V 50 Hz / 440 V 60 Hz
Thermostat
NSYCU3100W400VR
Control
Reference
9
ClimaSys CE
Air-water exchanger
Side and top-mounting models
General characteristics
• Main components: thermostatic adjustment system, exchange cassette, fans for
the internal circuit of the enclosure, safety device against possible leaks.
• The desired temperature inside the enclosure can be adjusted over a range of
+25...+50 ºC.
• The alarm which detects an interruption in the water circuit is activated by closing
a switch. This can be used to activate a light or a siren, connected to the input of
an automation device. The water supply is automatically cut.
• System for evacuating condensation water to the outside.
• RAL 7035 grey.
Conditions of use
• Air-water exchangers can be used even when the outside temperature is higher
than the desired temperature inside the enclosure.
• The enclosure must be sealed to prevent the entry of external air: at least IP 54.
Reference
Cooling characteristics
Specific power A 35 W 10-200 l/h
Maximum water pressure
Air flow of the external circuit
Adjustment
Type
Temperature setting range
Nature of the fluid
Electric characteristics
Input voltage
Starting/rated current
Electrical energy absorbed
Type of switching alarm
Physical characteristics
External dimensions A x B x C (mm)
IP-DIN 40050
Weight of unit
Noise level
10
NSYCEW2100W230VR
(top)
NSYCEW2100W230VL
(side)
NSYCEW3150W230VL
(side)
2,100 W
1 MPa
250 m3/h
Yes
Thermostatic
+25...+50 °C
Water
2,100 W
1 MPa
350 m3/h
Yes
Thermostatic
+25...+50 °C
Water
3,150 W
1 MPa
820 m3/h
Yes
Thermostatic
+8...+50 °C
Water
230 V - 50/60 Hz
1/0.5 A
90 W
Inverter contact
230 V - 50/60 Hz
1/0.5 A
90 W
Inverter contact
230 V - 50/60 Hz
1.3/1.7 A
295 W/385 W
Inverter contact
310 600 365
IP 54
26 kg
64 dB (A)
830 360 113
IP 54
19 kg
62 dB (A)
950 400 190
IP 55
21 kg
54 dB (A)
ClimaSys CE
Air-air exchanger
Side and Top-mounting models
General characteristics
• Main components: thermostatic adjustment system, exchange cassette, circulation
fans for internal and external circuits.
• The desired temperature inside the enclosure can be adjusted over a range
of +25 ... +50 °C.
• The internal and external air circuits are completely separated (IP 54). Two fans
guarantee air circulation in each of these circuits. The one on the internal circuit
(which circulates the air inside the enclosure) is permanently on to avoid the
appearance of hot spots in the electric circuits or components.
• The devices are delivered with a cut-out template, an instruction sheet and a
sealing gasket to be placed between the exchanger and the enclosure.
• RAL 7035 grey.
• Voltages on demand with 400 V AC, three phase or single phase.
Conditions of use
• The exchangers can only be used if the outside temperature is at least 5 ºC lower
than the desired temperature inside the enclosure.
• The enclosure must be sealed to prevent the entry of external air: at least IP 54.
Reference
NSYCEA15W230VL
NSYCEA35W230VL
NSYCEA35W230VLE
NSYCEA70W230VL
Cooling characteristics
Specific power (1)
15 W/°K
35 W/°K
35 W/°K
70 W/°K
Air flow of the external circuit
200 m3/h
450 m3/h
450 m3/h
450 m3/h
Air flow of the internal circuit
200 m3/h
450 m3/h
450 m3/h
450 m3/h
2
2
2
6.6 m2
1.23 m
1.5 m
1.5 m
Yes
Yes
No
Yes
Type
Thermostatic
Thermostatic
Thermostatic
Thermostatic
Temperature setting range
+25...+50 °C
+25...+50 °C
-
+25...+50 °C
Air
Air
Air
Air
230 V - 50/60 Hz
230 V - 50/60 Hz
230 V - 50/60 Hz
230 V - 50/60 Hz
2.1/0.7 A
2.1/0.7 A
2.1/0.7 A
2.1/0.7 A
150 W
150 W
150 W
150 W
700 270 144
780 325 144
780 325 144
1,480 450 144
IP 54/IP 22
IP 54/IP 22
IP 54/IP 22
IP 54/IP 22
Weight of unit
12 kg
15 kg
15 kg
35 kg
Noise level
64 dB
64 dB
64 dB
64 dB
Exchange surface
Adjustment
Nature of the fluid
Electric characteristics
Input voltage
Starting/rated current
Electrical energy absorbed
Physical characteristics
External dimensions A B C (mm)
Internal IP / external IP
(1) The power in watts is obtained by multiplying the specific power by the difference between inside temperature and outside temperature.
Example: for exchanger ref. NSYCEA35W230VL with % ºC = 10º, the system power is 35 10 = 350 W.
11
ClimaSys CR
Resistance heaters
Selection guide
Insulated resistance heater with fan
Power (W)
Voltage (V)
Connection type
Terminal block
Reference
177
230 AC
•
NSYCR170W230VVC
Power (W)
Voltage (V)
Connection type
Terminal block
Reference
350
400/550
400/550
230 AC
120 AC
230 AC
•
•
•
NSYCR350W230VTVC
NSYCRP1W120VTVC
NSYCRP1W230VTVC
Thermofans
NSYCR350W230VTVC
Resistance heaters
Connection type
Power (W)
10
10
20
20
20
55
55
55
90
90
90
150
150
150
Voltage (V)
12-24 DC
110-250 AC
12-24 DC
110-250 AC
270-420 AC
12-24 DC
110-250 AC
270-420 AC
12-24 DC
110-250 AC
270-420 AC
12-24 DC
110-250 AC
270-420 AC
Reference
Terminal
block
Cable
•
•
•
•
•
•
•
•
•
•
•
•
•
•
NSYCR10WU1
NSYCR10WU2
NSYCR20WU1
NSYCR20WU2
NSYCR20WU3
NSYCR55WU1
NSYCR55WU2
NSYCR55WU3
NSYCR100WU1
NSYCR100WU2
NSYCR100WU3
NSYCR150WU1
NSYCR150WU2
NSYCR150WU3
Resistance heaters with fan
NSYCRS200W230V
Power (W)
Voltage (V)
Connection type
Terminal block
Reference
250
250
400
400
200
200
115 AC
230 AC
115 AC
230 AC
115 AC
230 AC
•
•
•
•
•
•
NSYCR250W115VV
NSYCR250W230VV
NSYCR400W115VV
NSYCR400W230VV
NSYCRS200W115V
NSYCRS200W230V
Insulated resistance heaters
12
Power (W)
Voltage (V)
Connection type
Terminal block
Reference
10
10
21
21
55
55
55
100
100
100
147
147
12-24 DC
110-250 AC
12-24 DC
110-250 AC
12-24 DC
110-250 AC
270-420 AC
12-24 DC
110-250 AC
270-420 AC
12-24 DC
110-250 AC
•
•
•
•
•
•
•
•
•
•
•
•
NSYCR10WU1C
NSYCR10WU2C
NSYCR20WU1C
NSYCR20WU2C
NSYCR55WU1C
NSYCR55WU2C
NSYCR55WU3C
NSYCR100WU1C
NSYCR100WU2C
NSYCR100WU3C
NSYCR150WU1C
NSYCR150WU2C
ClimaSys CC
Thermal control
Selection guide mechanical version
Control temperature
Control a resistance heater or an alarm
Setting range
0...+60 °C
+32...+140 °F
Display
Contact
Application
Control element
Interrupting capacity
(resistive load)
O
Heat
Bimetal
30 W DC
120 V AC; 15 A
250 V AC; 10 A
°C
°F
Reference
NSYCCOTHC
NSYCCOTHCF
NC thermostat
Control a fan or an alarm
Setting range
0...+60 °C
+32...+140 °F
Display
Contact
Application
Control element
Interrupting capacity
(resistive load)
NO
Ventilate
Bimetal
30 W DC
120 V AC; 15 A
250 V AC; 10 A
°C
°F
Reference
NSYCCOTHO
NSYCCOTHOF
NO thermostat
Control a resistance heater and a fan
Setting range
Display
Contact
Application
Control element
Interrupting capacity
(resistive load)
0…+60 °C
°C
NC
+
NO
Heat /
Ventilate
Bimetal
30 W DC
120 V AC; 15 A
250 V AC; 10 A
+32…+140 °F
°F
Reference
NSYCCOTHD
NSYCCOTHDF
Double thermostat
Control a resistance heater or a fan
Setting range
Display
0…+60 °C
°C
+32…+140 °F
°F
Contact
Application
Inverse
Heat or
ventilate
Control element
Interrupting capacity
(resistive load)
Bimetal
Closing: 30 W DC
250 V AC; 5 A
Opening: 30 W DC
250 V AC; 10 A
Reference
NSYCCOTHI
NSYCCOTHIF
Thermostat with inverse
contact
13
ClimaSys CC
Thermal control
Selection guide electronic version
Control temperature
Control a resistance heater or a fan
Setting range
Display
Power input
Application
Control
element
No. of Interrupting capacity
relays
(resistive load)
NSYCCOTH30VID
9-30 V AC/DC
+5 °C…+50 °C
°C or °F
110-120 V AC
Heat or
ventilate
Electronic
2
8 (5) A 230 V AC
5 A 30 V DC
230 V AC
Electronic thermostat
Reference
NSYCCOTH120VID
NSYCCOTH230VID
7 different operating modes.
Option of installing an external sensor.
Control temperature and relative humidity
Setting range
Display
Power input
Application
Control
element
No. of Interrupting capacity
relays
(resistive load)
NSYCCOHYT30VID
9-30 V AC/DC
+5 °C…+50 °C
°C or °F
110-120 V AC
Heat or
ventilate
Electronic
2
8 (5) A 230 V AC
5 A 30 V DC
230 V AC
Electronic hygrotherm
Reference
NSYCCOHYT120VID
NSYCCOHYT230VID
3 different operating modes.
Option of installing one or two external sensors.
Control relative humidity
Setting range
20%…80%
Display
Power input
Application
Control
element
% RH
230 V AC
Heat or
ventilate
Electronic
No. of Interrupting capacity
relays
(resistive load)
2
8 (5) A 230 V AC
5 A 30 V DC
Reference
NSYCCOHY230VID
2 different operating modes.
Electronic hygrostat
PTC external temperature sensor (double insulation)
• Length: 3 metres.
• Several types of fixings (on DIN rail, on Spacial SF profile, on VDI cross-rail, on
mounting plate).
• Sensor operation or reading range: -30 °C…+80 °C.
• Protection rating: IP 67.
Reference
NSYCCAST
Temperature sensor
Thermostat installation tips:
The thermostat should be installed at the top of the enclosure (the hottest place).
See the various operating modes of each thermostat to choose the one that best
meets your needs.
Hygrostat installation tips:
The hygrostat should be installed at the bottom of the enclosure.
60% RH is the optimum value in the enclosure.
14
Contact:
Schneider Electric Romania
www.schneider-electric.ro
Due to the evolution of standards and materials, the characteristics indicated by the text and images of this document
are not binding for us until our services have confirmed them.
Make
the most
of your energy
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising