MCU Fab(TSMC) & Assy(ASECL)Site Expansion Std

MCU Fab(TSMC) & Assy(ASECL)Site Expansion Std
Process Change Notice #1011021
____________________________________________________________________________________________________
User Registration
Register today to create your account on Silabs.com. Your personalized profile allows you to receive technical document
updates, new product announcements, “how-to” and design documents, product change notices (PCN) and other valuable content
available only to registered users. http://www.silabs.com/profile
PCN Date: 02Nov10
Effective Date: 02Feb11
Title: MCU Fabrication - TSMC Fab10 & Assembly Capacity Expansion – ASECL
Originator: Ross Bannatyne
Phone: +15125325780
Dept: Marketing
Customer Contact: Kathy Hagar
Phone: +15125325261
Dept: Inside Sales
PCN Type:
Assembly
Discontinuance
Package
Datasheet
Fabrication
Product Revision
Packing
Labeling
Location
Test
Other
Last Order Date: 02Feb11
PCN Details
Description of Change:
Silicon Laboratories (Silicon Labs) is pleased to announce the successful qualification of Taiwan
Semiconductor Manufacturing Company Ltd. (TSMC) Fab 10 (TSMC10) as an additional Fab site and
Advanced Semi-conductor Engineering Chung Li (ASECL) as an additional Assembly site for MCU QFN
products.
TSMC’s Fab10 is being added as an additional Fabrication site for Silicon Labs MCU products
currently being fabricated in TSMC’s Fab3 site. This is a transfer of the same die designs from one
TSMC factory to another.
ASECL is an existing Assembly site for Silicon Labs QFN products. This facility will be used as an
additional assembly site for MCU QFN products currently assembled at UNISEM.
Both sites are certified to ISO9001, ISO14001 and ISO/TS16949 and are Sony Green Partners. This
PCN outlines MCU products that will be affected by either the Fab site addition, Assembly site
addition, or both. Please see the Product Identification section for details.
Reason for Change:
The qualification of both TSMC’s Fab10 and ASECL increases fabrication and assembly capacity for
MCU product. This is necessary to ensure we continue to meet delivery performance to customers as
demand and capacity requirements continue to increase.
Impact on Form, Fit, Function, Quality, Reliability:
There is no impact on form, fit, function, quality or reliability. The MCU devices fabricated at
TSMC’s Fab10 or assembled at ASECL comply with Silicon Labs relevant datasheets and quality
levels.
There is no change required for board layout or soldering profiles for the new ASECL packages. They
meet all of the same Moisture Sensitivity Level (MSL) specifications and are a direct, drop-in
replacement for existing packages. There are no changes to the mechanical specifications or
drawings. They continue to meet all restriction of hazardous substance requirements, including
RoHS, where applicable.
W7206F1 Process Change Notice Form rev Z
The information contained in this document is PROPRIETARY to Silicon Laboratories, Inc. and shall not be reproduced or used in
part or whole without Silicon Laboratories’ written consent. The document is uncontrolled if printed or electronically saved. Pg 1
Process Change Notice #1011021
____________________________________________________________________________________________________
Product Identification:
Products ordered under the following Ordering Part umbers (OPN) are affected by this change. Note
that parts with an “*” next to the OPN are available for immediate sampling. All others are
available using standard lead times. ASECL QFN products with an “*” next to the OPN may also be
used as mechanical samples for any other part in the same table. Parts within the same table use
the same BOM and assembly process flow for all parts within that table.
Example using the table titled “ASECL 10-DFN-3X3 Non-Automotive Flow Only”. The parts listed in
that table are not being transferred to Fab 10. The only change to parts in this table is the
additional availability of the 10-DFN-3x3 package offering from ASECL. The parts with OPN
C8051F300 and C8051F301 are available immediately for samples upon request. Either of those two
parts may be used for mechanical samples per JEDEC for any other part in the same table (such as
SI3461-E02-GM) because they use the same BOM, similar die size and same assembly process flow.
TSMC Fab 3 to Fab 10 Transfer Only
No Package Additions
C8051F310-GQ*
CF310-PX0188GQ
C8051F312-GQ*
CF320-XM0480GQ
C8051F314-GQ
CF320-XM0513GQ
C8051F320-GQ
TSMC Fab 3 to Fab 10 Transfer +
ASECL 20-QFN-4X4 Non-Automotive Flow
C8051F330-GM*
CP2120-GM*
CF330-PX0208GM
C8051F331-GM
CF330-PM0254GM
CF330-PX0243GM
C8051F332-GM
CF330-PM0266GM
CF330-PX0421GM
C8051F333-GM
CF330-PM0457GM
CF331-PX0330GM
C8051F334-GM
CF330-PM0467GM
CF332-PX0557GM
C8051F335-GM
CF330-PM0493GM
TSMC Fab 3 to Fab 10 Transfer +
ASECL 24-TQFN-4X4 Non-Automotive Flow
C8051F316-GM*
C8051F317-GM*
W7206F1 Process Change Notice Form rev Z
The information contained in this document is PROPRIETARY to Silicon Laboratories, Inc. and shall not be reproduced or used in
part or whole without Silicon Laboratories’ written consent. The document is uncontrolled if printed or electronically saved. Pg 2
Process Change Notice #1011021
____________________________________________________________________________________________________
TSMC Fab 3 to Fab 10 Transfer +
ASECL 28-QFN-5X5 Non-Automotive Flow
C8051F311-GM*
CF321-PX0324GM
CP2102SX0155GM
C8051F313-GM*
CF321-SX0067GM
CP2102SX0167GM
C8051F315-GM
CF326-SX0261GM
CP2102SX0214GM
C8051F321-GM*
CF327-PX0313GM
CP2102SX0334GM
C8051F326-GM
CF327-PX0407GM
CP2102SX0435GM
C8051F327-GM*
CF327-PX0418GM
CP2102SX0441GM
CF311-PX0223GM
CF327-PX0464GM
CP2102SX0550GM
CF311-PX0265GM
CF327-PX0534GM
CP2102XM0499GM
CF311-PX0308GM
CF327-PX0541GM
CP2102XX0385GM
CF311-PX0310GM
CF327-PX0556GM
CP2102XX0386GM
CF311-PX0336GM
CP2101-GM
CP2102XX0388GM
CF311-PX0402GM
CP2101SX0143GM
CP2102XX0539GM
CF315-PX0250GM
CP2102-GM*
CP2103-GM*
CF321-PM0161GM
CP2102PX0285GM
CP2103PX0276GM
CF321-PM0226GM
CP2102PX0294GM
CP2103SX0367GM
CF321-PX0320GM
ASECL 10-DFN-3X3 Non-Automotive Flow Only
C8051F300-GM*
C8051T606-GM
CF304-XX0395GM
C8051F301-GM*
SI3460-E02-GM
CF305-PX0342GM
C8051F302-GM
SI3460-E03-GM
CF305-PX0485GM
C8051F303-GM
SI3461-E02-GM
CF305-PX0504GM
C8051F304-GM
CF300-PM0317GM
CF305-PX0505GM
C8051F305-GM
CF300-XM0437GM
CF305-PX0506GM
C8051T600-GM
CF301-PX0389GM
CT601-PX0478GM
C8051T601-GM
CF301-PX0423GM
CT602-PX0427GM
C8051T602-GM
CF301-PX0476GM
CT603-PM0459GM
C8051T603-GM
CF301-PX0501GM
CT604-PM0508GM
C8051T604-GM
CF304-PM0297GM
CT604-PX0538GM
C8051T605-GM
CF304-PM0495GM
ASECL 10-DFN-3X3 Automotive Flow Only
C8051F520A-IM
C8051F521-IM
C8051F527A-IM
C8051F520-IM
C8051F524A-IM
C8051F527-IM*
C8051F521A-IM
C8051F526-IM
CF527APX0450IM
W7206F1 Process Change Notice Form rev Z
The information contained in this document is PROPRIETARY to Silicon Laboratories, Inc. and shall not be reproduced or used in
part or whole without Silicon Laboratories’ written consent. The document is uncontrolled if printed or electronically saved. Pg 3
Process Change Notice #1011021
____________________________________________________________________________________________________
ASECL 20-QFN-4X4 Non-Automotive Flow Only
C8051F336-GM*
C8051F813-GM
C8051T633-GM
C8051F337-GM
C8051F814-GM
C8051T634-GM
C8051F800-GM*
C8051F818-GM
C8051T635-GM
C8051F801-GM
C8051F819-GM*
CT632-PX0452GM
C8051F802-GM
C8051F820-GM
CT632-XM0449GM
C8051F806-GM
C8051T630-GM
CT633-PX0436GM
C8051F807-GM
C8051T631-GM
CT634-PX0475GM
C8051F808-GM
C8051T632-GM
CT634-PX0525GM
C8051F812-GM
ASECL 20-QFN-4X4 Automotive Flow Only
C8051F530A-IM*
C8051F531-IM
C8051F537A-IM
C8051F530-IM
C8051F534A-IM
C8051F537-IM
C8051F531A-IM
C8051F534-IM
CF534APM0462IM
ASECL 24-TQFN-4X4 Non-Automotive Flow Only
C8051F338-GM
C8051F557-IM
C8051F997-GM
C8051F339-GM
C8051F717-GM
C8051T616-GM
C8051F542-IM
C8051F901-GM
C8051T617-GM
C8051F543-IM
C8051F902-GM
CF338-PX0377GM
C8051F546-IM
C8051F911-GM
CF338-PX0451GM
C8051F547-IM
C8051F912-GM
CF921-PM0529GM
C8051F550-IM
C8051F921-GM*
CF921-PM0570GM
C8051F551-IM
C8051F931-GM*
CP2104-B01-GM
C8051F552-IM
C8051F986-GM
CP2104-E02-GM
C8051F553-IM
C8051F987-GM
CP2104PX0523GM
C8051F554-IM
C8051F988-GM
CP2104SX0542GM
C8051F555-IM
C8051F989-GM
CP2104XX0522GM
C8051F556-IM
C8051F996-GM*
CP3000-GM
ASECL 28-QFN-5X5 Non-Automotive Flow Only
C8051F351-GM
C8051F413-GM
CP2201-GM
C8051F353-GM
C8051T326-GM
CT321-PX0524GM
C8051F362-GM*
C8051T611-GM
CT326-PX0566GM
C8051F365-GM
C8051T613-GM
CT326-PX0568GM
C8051F367-GM
C8051T615-GM
SI8250-IM
C8051F369-GM
CF411-PX0323GM
SI8252-IM
C8051F411-GM*
W7206F1 Process Change Notice Form rev Z
The information contained in this document is PROPRIETARY to Silicon Laboratories, Inc. and shall not be reproduced or used in
part or whole without Silicon Laboratories’ written consent. The document is uncontrolled if printed or electronically saved. Pg 4
Process Change Notice #1011021
____________________________________________________________________________________________________
ASECL 32-QFN-5X5 Non-Automotive Flow Only
C8051F342-GM
C8051F347-GM
C8051F34B-GM
C8051F343-GM
C8051F349-GM*
CP2501-B01-GM
C8051F346-GM
C8051F34A-GM
C8051F502-IM
C8051F503-IM
C8051F506-IM
C8051F507-IM
C8051F540-IM
C8051F541-IM
C8051F544-IM
C8051F545-IM
ASECL 32-QFN-5X5 Automotive Flow Only
C8051F560-IM
C8051F582-IM
C8051F561-IM
C8051F583-IM
C8051F562-IM
C8051F586-IM
C8051F563-IM
C8051F587-IM
C8051F564-IM
C8051F920-GM*
C8051F565-IM
C8051F930-GM
C8051F566-IM
C8051T620-GM
C8051F567-IM
CF930-PX0429GM
Note: Affected Part Numbers also include any additional custom parts made from the above listed
base parts and tape and reel equivalents (“R” suffix).
Last Date of Unchanged Product: 02Feb11
Qualification Samples:
Available upon request. Parts listed with an “*” next to their Orderable Part Number (OPN) in the
tables above are available for shipment immediately. All other parts are available with standard
lead times. The parts with an “*” next to the OPN in a particular table (for example C8051F300GM* in table “ASECL 10-DFN-3X3 Non-Automotive Flow Only”) can be used as mechanical samples
for any of the other products listed in the same table (such as SI3460-E03-GM in table “ASECL 10DFN-3X3 Non-Automotive Flow Only” for this example). Please contact your local Silicon Labs sales
representative to order samples. A list of Silicon Labs sales representatives may be found at
www.silabs.com.
Note: Silicon Labs PCN Policy complies with JEDEC Standard JESD46.
Customer Early Acceptance Sign Off:
Customers may approve early PCN acceptance by completing the information below:
Early Acceptance Date:
Name:
Company:
Email your early Acceptance approval to: katherine.haggar@silabs.com
Qualification Data:
See Appendix A for Qualification Reports
W7206F1 Process Change Notice Form rev Z
The information contained in this document is PROPRIETARY to Silicon Laboratories, Inc. and shall not be reproduced or used in
part or whole without Silicon Laboratories’ written consent. The document is uncontrolled if printed or electronically saved. Pg 5
Process Change Notice #1011021
____________________________________________________________________________________________________
Appendix A: Qualification Reports
W7206F1 Process Change Notice Form rev Z
The information contained in this document is PROPRIETARY to Silicon Laboratories, Inc. and shall not be reproduced or used in
part or whole without Silicon Laboratories’ written consent. The document is uncontrolled if printed or electronically saved. Pg 6
Process Change Notice #1011021
____________________________________________________________________________________________________
W7206F1 Process Change Notice Form rev Z
The information contained in this document is PROPRIETARY to Silicon Laboratories, Inc. and shall not be reproduced or used in
part or whole without Silicon Laboratories’ written consent. The document is uncontrolled if printed or electronically saved. Pg 7
Process Change Notice #1011021
____________________________________________________________________________________________________
W7206F1 Process Change Notice Form rev Z
The information contained in this document is PROPRIETARY to Silicon Laboratories, Inc. and shall not be reproduced or used in
part or whole without Silicon Laboratories’ written consent. The document is uncontrolled if printed or electronically saved. Pg 8
Process Change Notice #1011021
____________________________________________________________________________________________________
W7206F1 Process Change Notice Form rev Z
The information contained in this document is PROPRIETARY to Silicon Laboratories, Inc. and shall not be reproduced or used in
part or whole without Silicon Laboratories’ written consent. The document is uncontrolled if printed or electronically saved. Pg 9
Process Change Notice #1011021
____________________________________________________________________________________________________
W7206F1 Process Change Notice Form rev Z
The information contained in this document is PROPRIETARY to Silicon Laboratories, Inc. and shall not be reproduced or used in
part or whole without Silicon Laboratories’ written consent. The document is uncontrolled if printed or electronically saved. Pg
10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising