KEMA 05ATEX2006

KEMA 05ATEX2006
CERTIFICATE
(1)
EC-Type Examination
(2)
Equipment and protective systems intended for use in
potentially explosive atmospheres - Directive 94/9/EC
(3)
EC-Type Examination Certificate Number: KEMA 05ATEX2006
(4)
Equipment:
Fieldbus XE Megablock Models F244-XE through F273-XE and
XE Megablock Terminator Type FCS-MBT-XE
(5)
Manufacturer:
Relcom Inc.
(6)
Address:
2221 Yew Street, Forest Grove, OR 97116, USA
(7)
This equipment and any acceptable variation thereto is specified in the schedule to this certificate and the
documents therein referred to.
(8)
DEKRA Certification B.V., notified body number 0344 in accordance with Article 9 of the Council Directive 94/9/EC
of 23 March 1994, certifies that this equipment has been found to comply with the Essential Health and Safety
Requirements relating to the design and construction of equipment and protective systems intended for use in
potentially explosive atmospheres given in Annex II to the directive.
Issue Number: 2
The examination and test results are recorded in confidential test report number 207624200 Issue 4
(9)
Compliance with the Essential Health and Safety Requirements has been assured by compliance with:
EN 60079-0 : 2012
EN 60079-7 : 2007
EN 60079-18 : 2009
(10)
If the sign ”X” is placed after the certificate number, it indicates that the equipment is subject to special conditions
for safe use specified in the schedule to this certificate.
(11)
This EC-Type Examination Certificate relates only to the design, examination and tests of the specified equipment
according to the Directive 94/9/EC. Further requirements of the directive apply to the manufacturing process and
supply of this equipment. These are not covered by this certificate.
(12)
The marking of the equipment shall include the following:
II 2 G Ex e mb IIC T4 Gb
This certificate is issued on 14. January 2015 and, as far as applicable, shall be revised before the date of
cessation of presumption of conformity of (one of) the standards mentioned above as communicated in the Official
Journal of the European Union.
DEKRA Certification B.V.
í
R. Pommé
Certification Manager
©
Integral publication of this certificate and adjoining reports is allowed. This Certificate may only be reproduced
in its entirety and without any change.
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem The Netherlands
T +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Registered Arnhem 09085396
Page 1/3
(13)
SCHEDULE
(14)
to EC-Type Examination Certificate KEMA 05ATEX2006
(15)
Description
Issue No. 2
The XE Megablock Models F244-XE through F273-XE are DIN rail mounted passive hubs for
Foundation Fieldbus networks. They provide up to 12 spur connectors to the Fieldbus segment
and 2 trunk connectors that allow the Fieldbus segment to be expanded. The spur connectors
may be provided with current limiting SpurGuards.
No SpurGuard
XE Megablock Model code
With SpurGuard
Smart SpurGuard
4 – Port
No Terminator
F244-XE
Terminator
F246-XE
Switchable Terminator
F248-XE
8 – Port
No Terminator
F250-XE
Terminator
F252-XE
Switchable Terminator
F254-XE
10 – Port
No Terminator
F256-XE
Terminator
F258-XE
Switchable Terminator
F260-XE
12 – Port
No Terminator
F268-XE
Terminator
F270-XE
Switchable Terminator
F272-XE
Options to the model codes:
For current limit of SpurGuards (SG): -3:
-5:
-6:
For connectors:
-PC:
-PC-J:
F245-XE
F247-XE
F249-XE
F262-XE
F263-XE
F264-XE
F251-XE
F253-XE
F255-XE
F265-XE
F266-XE
F267-XE
F257-XE
F259-XE
F261-XE
----
F269-XE
F271-XE
F273-XE
----
30 mA
50 mA
60 mA
Spring Clamp Connectors
Green Spring Clamp Connectors.
The XE Megablock Terminator Type FCS-MBT-XE is a DIN rail mounted terminator for Fieldbus
networks that also includes some surge protection.
XE Megablock Models F244-XE through F273-XE and ME Megablock Terminator Type FCSMBT-XE shall be installed in a suitable enclosure in type of protection increased safety “e”.
Ambient temperature range:
-45 °C to +70 °C
Electrical data
Rated voltage:
Rated current:
30 Vdc
1,5 A
Installation instructions
The instructions provided with the equipment shall be followed in detail to assure safe operation.
Page 2/3
Form 100
Version 5 (2013-07)
(13)
SCHEDULE
(14)
to EC-Type Examination Certificate KEMA 05ATEX2006
(16)
Test Report
Issue No. 2
No. 207624200 Issue 4
(17)
Special conditions for safe use
None.
(18)
Essential Health and Safety Requirements
Covered by the standards listed at (9).
(19)
Test documentation
As listed in Test Report No. 207624200 Issue 4.
Page 3/3
Form 100
Version 5 (2013-07)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising