F The complete Emergency Voice Communication system.

F The complete Emergency Voice Communication system.
BBC Omnicare A46p AW 0807
18/9/07
09:35
Page 1
The complete Emergency Voice Communication system.
Product Codes
Master Control Panels:
or twenty five years Baldwin Boxall has been at the forefront of the
communications industry and is now widely recognised as being
Europe’s leading independent manufacturer of Voice Alarm/Evacuation,
Fire Telephones, Disabled Refuge Communication and Public Address
Equipment. Continual product development has always been at the heart of
our business philosophy, which is why our research and development
engineers have an outstanding reputation for creating new products, be they
standard or bespoke. Our dedication to providing solutions to emergency
communication needs and on-going commitment to customers, has led
to the development of a sophisticated and versatile Emergency Voice
Communication system;VIGIL OmniCare.
F
THE COMPLETE EMERGENCY
V O I C E C O M M U N I C AT I O N
SYSTEM (EVC)
Mini: BVOC8M~8-way mini, BVOC16M~16-way mini, BVOC32M~32-way mini.
BVCRFB2 8-32 way flush mounting bezel.
Standard: BVOC48~48-way, BVOC64~64-way.
BVCRFB1 16-64 way flush mounting bezel.
Large: BVOC80~80-way, BVOC96~96-way, BVOC112~112-way, BVOC128~128-way.
Stainless steel units available.
VIGIL OmniCare is a fully addressable emergency voice communication system
that allows disabled refuge, fire telephones and disabled toilet alarm remote units
to be connected to just one system. It has been developed in accordance with
BS5588, BS5839 part 9 and BS8300:2001 (for the Disabled Toilet Alarm).
Remote Units:
Disabled Refuge: BVOCECP~standard red unit, BVOCECPS~stainless steel unit.
Flush Mounting Bezels: BVCRMRED~for BVOCECP and BVCRMSS~for BVOCECPS.
The system has two main components; a Master Control Panel and the Remote
units.The Master Control Panel is available in various options: 8~128 way.
Control panels also function as slave panels when wired into a VIGIL OmniCare
system on the ring circuit loop.The Master Control Panel is normally wall
mounted within a central control room, with additional panels at other locations
for control of local areas, e.g. in a stairwell or fallback position.The remote units
are supplied in four different styles: Disabled Refuge, Fire Telephone, Disabled
Toilet Alarm and combined Disabled Refuge/Fire telephone.
Advanced Disabled Refuge: BVOCAS~standard surface mounting and BVOCAF~flush mounting.
Fire Telephone: BVFH~red push door, BVFHL~red slot lock, BVFHB~red push door & beacon,
BVFHLB~red slot lock & beacon. Stainless steel enclosures and bezels are made to order. Please ring for details.
Flush Mounting Bezels: BVFHBEZ.
BVOC128~128 way
Master Control Panel
Combined DRS and Fire Telephone:
Push door: BVOCRFC~red unit, BVOCRFXB~red unit with beacon, BVOCRFCS~stainless steel unit
Locking door: BVOCRFCL~red unit, BVOCRFCLXB~red unit with beacon, BVOCRFCSL~stainless steel unit.
Flush mounting bezel available.
Disabled Toilet Alarm: BVOCDTA~disabled toilet alarm kit, BVOCDTAS~stainless steel.
Full system monitoring for functionality is standard with VIGIL OmniCare and
faults are reported at the Master Control Panels.The system has been designed
with functionality and practicality equally in mind.
Repeater Unit: BVFREPEM.
Features:
For specific technical advice on the system, choice of cabling, cabling design
or any other aspect of the VIGIL range of products, please contact our
Technical Advice Team on: +44 (0) 1892 664422
L Up to 128 way, constructed in 16 way switch boards.
L Fully addressable.
L Link to fire detection system to prevent hoax disabled refuge calls (Disabled
Toilet Alarms and Fire Telephones remain active).
L Up to 128 master panels can be linked in one system.
L Wall mountable ~ optional flush mounting with bezel (see below).
L Lockable glazed door.
L Speech steered (DRS remotes) and Full duplex (Fire telephones) speech.
BVOC64~64 way
L Fully monitored ~ faults reported at the Master Control Panel.
L Battery backed ~ 24 hour quiescent with 3 hours full use, 230V AC with
built-in battery charger.
L Volt free contact ~ operated when in fault, set during installation.
L Indicators for: in use/occupied, call, fault, power, charger and speech volume.
L ‘Listening’ facility.
B A L D W I N B O X A L L C O M M U N I C AT I O N S L I M I T E D
We a l d e n I n d u s t r i a l E s t a t e
Farningham Road . Jar vis Brook
Crowborough . East Sussex . TN6 2JR . UK
L Fully BS5588 Part 11, BS5839 part 9 and BS8300 compliant, when installed
according to both standards.
L Distinguishing ‘Orange’ name panel.
BVOC32~32 way
Te l : + 4 4 ( 0 ) 1 8 9 2 6 6 4 4 2 2
Fax: +44 (0) 1892 663146
e-mail: mail@baldwinboxall.co.uk
website: www.baldwinboxall.co.uk
OmniCare Control Unit ~ Technical Specification
Power supply
Power consumption (VA)
Weight
Humidity range
Temperature range
Indicators
Remote signalling of fault
Dimensions mm – W x H x D
Bezel Dimensions – W x H x D
Bezel cut out dimensions – W x H
Knockouts
230V AC
10VA + 1VA per remote handset connected
21kg up to 32way, 26kg up to 64way, 37kg up to 128way units.
95% Non-condensing
-10˚C to +30˚C
In-use, call, fault, power, charger and speech volume
Volt-free contact, closing/opening set on commissioning
410mm (W) x 290mm (H) x 200mm (D) (8~32 Way)
410mm (W) x 455mm (H) x 200mm (D) (16~64 Way)
410mm (W) x 777mm (H) x 200mm (D) (80~128 Way)
461mm (W) x 340mm (H) x 25mm (D) (8~32 Way)
461mm (W) x 506mm (H) x 25mm (D) (16~64 Way)
420mm (W) x 300mm (H) (8~32 Way)
420mm (W) x 465mm (H) (16~64 Way)
20mm diameter in top and rear
+44 (0) 1892 664422
THE
Cert No. FM41357
COMPLETE
SPECTRUM
OF
C O M M U N I C AT I O N
SOLUTIONS
Low Voltage Directive 73/23/EEC as amended by 93/68/EEC
EMC Directive 89/336/EEC as amended by 92/31/EEC and 93/68/EEC
Applies only when the items are correctly fitted and operated in or with products of our manufacture
and are installed in a recommended enclosure.
BBC Omnicare A46p AW 0807
18/9/07
09:35
Page 1
The complete Emergency Voice Communication system.
Product Codes
Master Control Panels:
or twenty five years Baldwin Boxall has been at the forefront of the
communications industry and is now widely recognised as being
Europe’s leading independent manufacturer of Voice Alarm/Evacuation,
Fire Telephones, Disabled Refuge Communication and Public Address
Equipment. Continual product development has always been at the heart of
our business philosophy, which is why our research and development
engineers have an outstanding reputation for creating new products, be they
standard or bespoke. Our dedication to providing solutions to emergency
communication needs and on-going commitment to customers, has led
to the development of a sophisticated and versatile Emergency Voice
Communication system;VIGIL OmniCare.
F
THE COMPLETE EMERGENCY
V O I C E C O M M U N I C AT I O N
SYSTEM (EVC)
Mini: BVOC8M~8-way mini, BVOC16M~16-way mini, BVOC32M~32-way mini.
BVCRFB2 8-32 way flush mounting bezel.
Standard: BVOC48~48-way, BVOC64~64-way.
BVCRFB1 16-64 way flush mounting bezel.
Large: BVOC80~80-way, BVOC96~96-way, BVOC112~112-way, BVOC128~128-way.
Stainless steel units available.
VIGIL OmniCare is a fully addressable emergency voice communication system
that allows disabled refuge, fire telephones and disabled toilet alarm remote units
to be connected to just one system. It has been developed in accordance with
BS5588, BS5839 part 9 and BS8300:2001 (for the Disabled Toilet Alarm).
Remote Units:
Disabled Refuge: BVOCECP~standard red unit, BVOCECPS~stainless steel unit.
Flush Mounting Bezels: BVCRMRED~for BVOCECP and BVCRMSS~for BVOCECPS.
The system has two main components; a Master Control Panel and the Remote
units.The Master Control Panel is available in various options: 8~128 way.
Control panels also function as slave panels when wired into a VIGIL OmniCare
system on the ring circuit loop.The Master Control Panel is normally wall
mounted within a central control room, with additional panels at other locations
for control of local areas, e.g. in a stairwell or fallback position.The remote units
are supplied in four different styles: Disabled Refuge, Fire Telephone, Disabled
Toilet Alarm and combined Disabled Refuge/Fire telephone.
Advanced Disabled Refuge: BVOCAS~standard surface mounting and BVOCAF~flush mounting.
Fire Telephone: BVFH~red push door, BVFHL~red slot lock, BVFHB~red push door & beacon,
BVFHLB~red slot lock & beacon. Stainless steel enclosures and bezels are made to order. Please ring for details.
Flush Mounting Bezels: BVFHBEZ.
BVOC128~128 way
Master Control Panel
Combined DRS and Fire Telephone:
Push door: BVOCRFC~red unit, BVOCRFXB~red unit with beacon, BVOCRFCS~stainless steel unit
Locking door: BVOCRFCL~red unit, BVOCRFCLXB~red unit with beacon, BVOCRFCSL~stainless steel unit.
Flush mounting bezel available.
Disabled Toilet Alarm: BVOCDTA~disabled toilet alarm kit, BVOCDTAS~stainless steel.
Full system monitoring for functionality is standard with VIGIL OmniCare and
faults are reported at the Master Control Panels.The system has been designed
with functionality and practicality equally in mind.
Repeater Unit: BVFREPEM.
Features:
For specific technical advice on the system, choice of cabling, cabling design
or any other aspect of the VIGIL range of products, please contact our
Technical Advice Team on: +44 (0) 1892 664422
L Up to 128 way, constructed in 16 way switch boards.
L Fully addressable.
L Link to fire detection system to prevent hoax disabled refuge calls (Disabled
Toilet Alarms and Fire Telephones remain active).
L Up to 128 master panels can be linked in one system.
L Wall mountable ~ optional flush mounting with bezel (see below).
L Lockable glazed door.
L Speech steered (DRS remotes) and Full duplex (Fire telephones) speech.
BVOC64~64 way
L Fully monitored ~ faults reported at the Master Control Panel.
L Battery backed ~ 24 hour quiescent with 3 hours full use, 230V AC with
built-in battery charger.
L Volt free contact ~ operated when in fault, set during installation.
L Indicators for: in use/occupied, call, fault, power, charger and speech volume.
L ‘Listening’ facility.
B A L D W I N B O X A L L C O M M U N I C AT I O N S L I M I T E D
We a l d e n I n d u s t r i a l E s t a t e
Farningham Road . Jar vis Brook
Crowborough . East Sussex . TN6 2JR . UK
L Fully BS5588 Part 11, BS5839 part 9 and BS8300 compliant, when installed
according to both standards.
L Distinguishing ‘Orange’ name panel.
BVOC32~32 way
Te l : + 4 4 ( 0 ) 1 8 9 2 6 6 4 4 2 2
Fax: +44 (0) 1892 663146
e-mail: mail@baldwinboxall.co.uk
website: www.baldwinboxall.co.uk
OmniCare Control Unit ~ Technical Specification
Power supply
Power consumption (VA)
Weight
Humidity range
Temperature range
Indicators
Remote signalling of fault
Dimensions mm – W x H x D
Bezel Dimensions – W x H x D
Bezel cut out dimensions – W x H
Knockouts
230V AC
10VA + 1VA per remote handset connected
21kg up to 32way, 26kg up to 64way, 37kg up to 128way units.
95% Non-condensing
-10˚C to +30˚C
In-use, call, fault, power, charger and speech volume
Volt-free contact, closing/opening set on commissioning
410mm (W) x 290mm (H) x 200mm (D) (8~32 Way)
410mm (W) x 455mm (H) x 200mm (D) (16~64 Way)
410mm (W) x 777mm (H) x 200mm (D) (80~128 Way)
461mm (W) x 340mm (H) x 25mm (D) (8~32 Way)
461mm (W) x 506mm (H) x 25mm (D) (16~64 Way)
420mm (W) x 300mm (H) (8~32 Way)
420mm (W) x 465mm (H) (16~64 Way)
20mm diameter in top and rear
+44 (0) 1892 664422
THE
Cert No. FM41357
COMPLETE
SPECTRUM
OF
C O M M U N I C AT I O N
SOLUTIONS
Low Voltage Directive 73/23/EEC as amended by 93/68/EEC
EMC Directive 89/336/EEC as amended by 92/31/EEC and 93/68/EEC
Applies only when the items are correctly fitted and operated in or with products of our manufacture
and are installed in a recommended enclosure.
BBC Omnicare A46p AW 0807
18/9/07
09:35
Page 2
Disabled Refuge Remote
Fire Telephone Remote
VIGIL OmniCare has fully addressable remotes to give greater flexibility and
speed of identification during an emergency, meaning that OmniCare is the ideal
solution for any size of installation.
Disabled Toilet Alarm
The OmniCare Fire Telephone remotes offer users full duplex communication to
enable fire officers/building management to report the status of an emergency
within a building quickly and efficiently. Overall this ensures that the occupants
are evacuated with ease and less panic, keeping those controlling the evacuation
fully informed at all times.
Features:
L Speech Steered.
The Baldwin Boxall Disabled Toilet Alarm is fully compliant to BS8300:2001, which requires that all new disabled toilets are
fitted with an emergency toilet alarm.This system provides a compliant, reliable and easy to use disabled persons toilet
alarm which contains the following components:
Controller: Combined power supply and controller with reset button, audible alarm and high visibility LED.
Pull Switch: Ceiling mounted pull cord (with fully compliant G pulls) with LED.
Features:
L Red or stainless steel finish.
Reset point: Reset button & LED to reset calls locally.
L Full duplex speech.
L System healthy indicator.
L Volt free contact, active when occupied.To operate over-door lamps, silence
speaker/sounder etc.
Light/Sounder: Over door triangular lens with integral sounder to attract attention
L Hands free use.
BVOCECP
Features:
L Contains handset and loudspeaker.
L Exceeds BS8300:2001 requirements.
L Red or Stainless Steel.
L Call switch.
L Integral power supply ~ requires mains power.
L Push catch (standard) or optional slot lockable door and/or beacon.
L Wall mountable – optional flush mountable bezel available (see below).
L Monitored battery back up ~ from main OmniCare system.
L System healthy indicator.
L Self-powered from ring circuit.
L Powerful LEDs and sounder.
L Conference facility (via master control).
L Reset from either remote (key switch) or master control panel.
L Supply and Battery healthy indicators.
L Wall mountable (optional flush mountable bezel available).
L Typically 20-30 remote units per loop – minimum of two.
L Typically 20-30 remote units per loop – minimum of two.
BVFHLSS
BVFHL
L Reset button enable/disable.
L Self test facility to ensure all sounders and LEDs are fully operational.
Disabled Refuge Remote Call Point ~ Technical Specification
Power supply
Power consumption (VA)
Weight
Humidity range
Temperature range
Indicators
Dimensions mm – W x H x D
Bezel Dimensions – W x H x D
Bezel cut out dimensions – W x H
Knockouts
L Two alarm modes (flashing or steady LEDs).
12-40V DC self powered from ring circuit
30mA @ 35V typical
1kg
95% Non-condensing
-10˚C to +40˚C
System Healthy, status
134mm (W) x 134mm (H) x 46mm (D)
154mm (W) x 154mm (H) x 10mm radius
136mm (W) x 136mm (H) x 10mm radius
20mm and 25mm in sides of back box
Fire Telephone Remotes ~ Technical Specification
BVOCECPS
Power supply
Power consumption (VA)
Weight
Humidity range
Temperature range
Indicators
Dimensions mm – W x H x D
Bezel Dimensions – W x H x D
Bezel cut out dimensions – W x H
Knockouts
L Plug on terminals to ease installation.
12-40V DC self powered from ring circuit
30mA @ 35V typical
4kg
95% Non-condensing
-10˚C to +40˚C
System Healthy
130mm (W) x 350mm (H) x 100mm (D) excluding beacon
170mm (W) x 390mm (H) x 20mm (D)
138mm (W) x 358mm (H)
20mm and 25mm in sides of back box
L Twin G pulls and LED.
L Reset point with re-assurance LED.
L Over door light with sounder.
L Supplied with disabled WC door sign.
The disabled toilet alarm units can be connected to the VIGIL OmniCare system via a BVFREPEM repeater unit and any
number of disabled toilet alarms can be wired to each repeater.
Optional Stainless Steel kit available, featuring a stainless steel reset button and over door light/sounder (controllers
and pull cord white).
Advanced Disabled Refuge Remote
Combined Disabled Refuge/Fire Telephone Remote
Disabled Toilet Alarm ~ Technical Specification
The OmniCare Advance remote unit is specifically designed for use by a
disabled person within a refuge area. It differs significantly to the standard
OmniCare Refuge remotes, both in looks and operation.
Unique to the OmniCare range, this is a unit that has been specially designed
to enable both a disabled remote and a Fire Telephone to be located at one
single ‘call’ position.
Features:
Features:
L Speech Steered.
L Same features as standard Disabled Refuge and Fire Telephone remotes.
L Green finish.
L Designed to enable correct mounting heights as set out in BS5839 Part 9.
L Induction Loop, Braille,Tactile Text and Luminescent Text as standard.
L Only one point of presence at the console.
L System healthy indicator.
BVFREPEM
L Volt free contact, active when occupied.To operate over-door lamps, silence
speaker/sounder etc.
L Call switch.
L Surface or flush mount.
Combined Disabled Refuge and Fire Telephone ~ Technical Specification
L Self-powered from ring circuit.
Power supply
Power consumption (VA)
Weight
Humidity range
Temperature range
Indicators
Dimensions mm – W x H x D
Bezel Dimensions – W x H
Bezel cut out dimensions – W x H
Knockouts
L Reset via button push.
L Typically 20-30 remote units per loop – minimum of two.
Advanced Disabled Refuge Remote ~ Technical Specification
Power supply
Power consumption (VA)
Weight
Humidity range
Temperature range
Indicators
Dimensions Flush mm
Dimensions Surface mount mm
Flush mount cut out dimensions
Knockouts
Power Supply
220-240 V AC
Output
12V DC
Fuse
Internal Thermal
Alarm Type
90dB @ 30cm
Battery Backup
Alkaline – type A23 12 Volt
Dimensions
Alarm controller
145mm H x 85mm x W x 13mm D
Over door light/sounder
85mm H x 85mm x W x 13mm D
Reset point
85mm H x 85mm x W x 13mm D
Ring pull
30mm H x 80mm diameter (fixing centres)
Cable requirements
4 or 6 core security alarm cable 7/0.2 or similar
Back box requirements (Please note: back boxes are not supplied with the disabled toilet alarm).
Alarm controller
35mm deep double gang flush back box or
‘round cornered’ plastic surface box is required
Over door light/sounder
25mm deep single gang flush back box or
‘round cornered’ plastic surface box is required
Reset point
25mm deep single gang flush back box or
‘round cornered’ plastic surface box is required
Ring pull
Supplied with its own surface mount enclosure
12 – 40V DC, self-powered form ring circuit
30mA @ 35V typical
1kg
95% Non-condensing
-10˚C to +40˚C
System Healthy, system activated and in-use
178mm (W) x 440mm (H) x 3mm (D)
180mm (W) x 440mm (H) x 64mm (D)
133mm (W) x 235mm (H) x 65mm (D)
20mm and 25mm diameter in sides of back box
12-40V DC self powered from ring circuit
35mA @ 35V typical
4.5kg
95% Non-condensing
-10˚C to +40˚C
System Healthy and Call Status
130mm x 480 x 100mm
170mm x 520mm
138mm x 486mm
20mm and 25mm in sides of back box
System Requirements
Fire rated enhanced four core cable with a screen must be used for loops. Up to 200m cable run between Remote Units
and Master Control Panel as standard. A repeater unit must be used if distance between remote units exceeds 200m.
BVOCRFCS
BVOCRFC
L A ring circuit configuration must be used to wire the remotes.
L Repeaters are used to connect the Toilet Alarms to the system.
There is incidence of unusually high capacitance of MICC cable and we would ask you to down rate the distances as shown
below.The capacitance of MICC cable varies between manufacturers so if you do have to specify MICC cable and if the
runs are greater than 100 metres, you may wish to contact our technical team to ensure it is within tolerance.
BVOCAF
Visit our web site at:
www.baldwinboxall.co.uk
L Disabled Refuge, Fire Telephone, combined DRS/Fire Telephone and Toilet Alarm Units can be placed
on the same loop.Typically 20-30 remotes per loop.
L MICC lightweight four core with screen: 100m.
For specific technical advice on the system, choice of cabling, cabling design
or any other aspect of the VIGIL range of products, please contact our
Technical Advice Team on: +44 (0) 1892 664422
L MICC heavyweight four core with screen: 200m.
L Enhanced colour coded four core with screen: 200m (recommended by Baldwin Boxall).
+44 (0) 1892 664422
BBC Omnicare A46p AW 0807
18/9/07
09:35
Page 2
Disabled Refuge Remote
Fire Telephone Remote
VIGIL OmniCare has fully addressable remotes to give greater flexibility and
speed of identification during an emergency, meaning that OmniCare is the ideal
solution for any size of installation.
Disabled Toilet Alarm
The OmniCare Fire Telephone remotes offer users full duplex communication to
enable fire officers/building management to report the status of an emergency
within a building quickly and efficiently. Overall this ensures that the occupants
are evacuated with ease and less panic, keeping those controlling the evacuation
fully informed at all times.
Features:
L Speech Steered.
The Baldwin Boxall Disabled Toilet Alarm is fully compliant to BS8300:2001, which requires that all new disabled toilets are
fitted with an emergency toilet alarm.This system provides a compliant, reliable and easy to use disabled persons toilet
alarm which contains the following components:
Controller: Combined power supply and controller with reset button, audible alarm and high visibility LED.
Pull Switch: Ceiling mounted pull cord (with fully compliant G pulls) with LED.
Features:
L Red or stainless steel finish.
Reset point: Reset button & LED to reset calls locally.
L Full duplex speech.
L System healthy indicator.
L Volt free contact, active when occupied.To operate over-door lamps, silence
speaker/sounder etc.
Light/Sounder: Over door triangular lens with integral sounder to attract attention
L Hands free use.
BVOCECP
Features:
L Contains handset and loudspeaker.
L Exceeds BS8300:2001 requirements.
L Red or Stainless Steel.
L Call switch.
L Integral power supply ~ requires mains power.
L Push catch (standard) or optional slot lockable door and/or beacon.
L Wall mountable – optional flush mountable bezel available (see below).
L Monitored battery back up ~ from main OmniCare system.
L System healthy indicator.
L Self-powered from ring circuit.
L Powerful LEDs and sounder.
L Conference facility (via master control).
L Reset from either remote (key switch) or master control panel.
L Supply and Battery healthy indicators.
L Wall mountable (optional flush mountable bezel available).
L Typically 20-30 remote units per loop – minimum of two.
L Typically 20-30 remote units per loop – minimum of two.
BVFHLSS
BVFHL
L Reset button enable/disable.
L Self test facility to ensure all sounders and LEDs are fully operational.
Disabled Refuge Remote Call Point ~ Technical Specification
Power supply
Power consumption (VA)
Weight
Humidity range
Temperature range
Indicators
Dimensions mm – W x H x D
Bezel Dimensions – W x H x D
Bezel cut out dimensions – W x H
Knockouts
L Two alarm modes (flashing or steady LEDs).
12-40V DC self powered from ring circuit
30mA @ 35V typical
1kg
95% Non-condensing
-10˚C to +40˚C
System Healthy, status
134mm (W) x 134mm (H) x 46mm (D)
154mm (W) x 154mm (H) x 10mm radius
136mm (W) x 136mm (H) x 10mm radius
20mm and 25mm in sides of back box
Fire Telephone Remotes ~ Technical Specification
BVOCECPS
Power supply
Power consumption (VA)
Weight
Humidity range
Temperature range
Indicators
Dimensions mm – W x H x D
Bezel Dimensions – W x H x D
Bezel cut out dimensions – W x H
Knockouts
L Plug on terminals to ease installation.
12-40V DC self powered from ring circuit
30mA @ 35V typical
4kg
95% Non-condensing
-10˚C to +40˚C
System Healthy
130mm (W) x 350mm (H) x 100mm (D) excluding beacon
170mm (W) x 390mm (H) x 20mm (D)
138mm (W) x 358mm (H)
20mm and 25mm in sides of back box
L Twin G pulls and LED.
L Reset point with re-assurance LED.
L Over door light with sounder.
L Supplied with disabled WC door sign.
The disabled toilet alarm units can be connected to the VIGIL OmniCare system via a BVFREPEM repeater unit and any
number of disabled toilet alarms can be wired to each repeater.
Optional Stainless Steel kit available, featuring a stainless steel reset button and over door light/sounder (controllers
and pull cord white).
Advanced Disabled Refuge Remote
Combined Disabled Refuge/Fire Telephone Remote
Disabled Toilet Alarm ~ Technical Specification
The OmniCare Advance remote unit is specifically designed for use by a
disabled person within a refuge area. It differs significantly to the standard
OmniCare Refuge remotes, both in looks and operation.
Unique to the OmniCare range, this is a unit that has been specially designed
to enable both a disabled remote and a Fire Telephone to be located at one
single ‘call’ position.
Features:
Features:
L Speech Steered.
L Same features as standard Disabled Refuge and Fire Telephone remotes.
L Green finish.
L Designed to enable correct mounting heights as set out in BS5839 Part 9.
L Induction Loop, Braille,Tactile Text and Luminescent Text as standard.
L Only one point of presence at the console.
L System healthy indicator.
BVFREPEM
L Volt free contact, active when occupied.To operate over-door lamps, silence
speaker/sounder etc.
L Call switch.
L Surface or flush mount.
Combined Disabled Refuge and Fire Telephone ~ Technical Specification
L Self-powered from ring circuit.
Power supply
Power consumption (VA)
Weight
Humidity range
Temperature range
Indicators
Dimensions mm – W x H x D
Bezel Dimensions – W x H
Bezel cut out dimensions – W x H
Knockouts
L Reset via button push.
L Typically 20-30 remote units per loop – minimum of two.
Advanced Disabled Refuge Remote ~ Technical Specification
Power supply
Power consumption (VA)
Weight
Humidity range
Temperature range
Indicators
Dimensions Flush mm
Dimensions Surface mount mm
Flush mount cut out dimensions
Knockouts
Power Supply
220-240 V AC
Output
12V DC
Fuse
Internal Thermal
Alarm Type
90dB @ 30cm
Battery Backup
Alkaline – type A23 12 Volt
Dimensions
Alarm controller
145mm H x 85mm x W x 13mm D
Over door light/sounder
85mm H x 85mm x W x 13mm D
Reset point
85mm H x 85mm x W x 13mm D
Ring pull
30mm H x 80mm diameter (fixing centres)
Cable requirements
4 or 6 core security alarm cable 7/0.2 or similar
Back box requirements (Please note: back boxes are not supplied with the disabled toilet alarm).
Alarm controller
35mm deep double gang flush back box or
‘round cornered’ plastic surface box is required
Over door light/sounder
25mm deep single gang flush back box or
‘round cornered’ plastic surface box is required
Reset point
25mm deep single gang flush back box or
‘round cornered’ plastic surface box is required
Ring pull
Supplied with its own surface mount enclosure
12 – 40V DC, self-powered form ring circuit
30mA @ 35V typical
1kg
95% Non-condensing
-10˚C to +40˚C
System Healthy, system activated and in-use
178mm (W) x 440mm (H) x 3mm (D)
180mm (W) x 440mm (H) x 64mm (D)
133mm (W) x 235mm (H) x 65mm (D)
20mm and 25mm diameter in sides of back box
12-40V DC self powered from ring circuit
35mA @ 35V typical
4.5kg
95% Non-condensing
-10˚C to +40˚C
System Healthy and Call Status
130mm x 480 x 100mm
170mm x 520mm
138mm x 486mm
20mm and 25mm in sides of back box
System Requirements
Fire rated enhanced four core cable with a screen must be used for loops. Up to 200m cable run between Remote Units
and Master Control Panel as standard. A repeater unit must be used if distance between remote units exceeds 200m.
BVOCRFCS
BVOCRFC
L A ring circuit configuration must be used to wire the remotes.
L Repeaters are used to connect the Toilet Alarms to the system.
There is incidence of unusually high capacitance of MICC cable and we would ask you to down rate the distances as shown
below.The capacitance of MICC cable varies between manufacturers so if you do have to specify MICC cable and if the
runs are greater than 100 metres, you may wish to contact our technical team to ensure it is within tolerance.
BVOCAF
Visit our web site at:
www.baldwinboxall.co.uk
L Disabled Refuge, Fire Telephone, combined DRS/Fire Telephone and Toilet Alarm Units can be placed
on the same loop.Typically 20-30 remotes per loop.
L MICC lightweight four core with screen: 100m.
For specific technical advice on the system, choice of cabling, cabling design
or any other aspect of the VIGIL range of products, please contact our
Technical Advice Team on: +44 (0) 1892 664422
L MICC heavyweight four core with screen: 200m.
L Enhanced colour coded four core with screen: 200m (recommended by Baldwin Boxall).
+44 (0) 1892 664422
BBC Omnicare A46p AW 0807
18/9/07
09:35
Page 2
Disabled Refuge Remote
Fire Telephone Remote
VIGIL OmniCare has fully addressable remotes to give greater flexibility and
speed of identification during an emergency, meaning that OmniCare is the ideal
solution for any size of installation.
Disabled Toilet Alarm
The OmniCare Fire Telephone remotes offer users full duplex communication to
enable fire officers/building management to report the status of an emergency
within a building quickly and efficiently. Overall this ensures that the occupants
are evacuated with ease and less panic, keeping those controlling the evacuation
fully informed at all times.
Features:
L Speech Steered.
The Baldwin Boxall Disabled Toilet Alarm is fully compliant to BS8300:2001, which requires that all new disabled toilets are
fitted with an emergency toilet alarm.This system provides a compliant, reliable and easy to use disabled persons toilet
alarm which contains the following components:
Controller: Combined power supply and controller with reset button, audible alarm and high visibility LED.
Pull Switch: Ceiling mounted pull cord (with fully compliant G pulls) with LED.
Features:
L Red or stainless steel finish.
Reset point: Reset button & LED to reset calls locally.
L Full duplex speech.
L System healthy indicator.
L Volt free contact, active when occupied.To operate over-door lamps, silence
speaker/sounder etc.
Light/Sounder: Over door triangular lens with integral sounder to attract attention
L Hands free use.
BVOCECP
Features:
L Contains handset and loudspeaker.
L Exceeds BS8300:2001 requirements.
L Red or Stainless Steel.
L Call switch.
L Integral power supply ~ requires mains power.
L Push catch (standard) or optional slot lockable door and/or beacon.
L Wall mountable – optional flush mountable bezel available (see below).
L Monitored battery back up ~ from main OmniCare system.
L System healthy indicator.
L Self-powered from ring circuit.
L Powerful LEDs and sounder.
L Conference facility (via master control).
L Reset from either remote (key switch) or master control panel.
L Supply and Battery healthy indicators.
L Wall mountable (optional flush mountable bezel available).
L Typically 20-30 remote units per loop – minimum of two.
L Typically 20-30 remote units per loop – minimum of two.
BVFHLSS
BVFHL
L Reset button enable/disable.
L Self test facility to ensure all sounders and LEDs are fully operational.
Disabled Refuge Remote Call Point ~ Technical Specification
Power supply
Power consumption (VA)
Weight
Humidity range
Temperature range
Indicators
Dimensions mm – W x H x D
Bezel Dimensions – W x H x D
Bezel cut out dimensions – W x H
Knockouts
L Two alarm modes (flashing or steady LEDs).
12-40V DC self powered from ring circuit
30mA @ 35V typical
1kg
95% Non-condensing
-10˚C to +40˚C
System Healthy, status
134mm (W) x 134mm (H) x 46mm (D)
154mm (W) x 154mm (H) x 10mm radius
136mm (W) x 136mm (H) x 10mm radius
20mm and 25mm in sides of back box
Fire Telephone Remotes ~ Technical Specification
BVOCECPS
Power supply
Power consumption (VA)
Weight
Humidity range
Temperature range
Indicators
Dimensions mm – W x H x D
Bezel Dimensions – W x H x D
Bezel cut out dimensions – W x H
Knockouts
L Plug on terminals to ease installation.
12-40V DC self powered from ring circuit
30mA @ 35V typical
4kg
95% Non-condensing
-10˚C to +40˚C
System Healthy
130mm (W) x 350mm (H) x 100mm (D) excluding beacon
170mm (W) x 390mm (H) x 20mm (D)
138mm (W) x 358mm (H)
20mm and 25mm in sides of back box
L Twin G pulls and LED.
L Reset point with re-assurance LED.
L Over door light with sounder.
L Supplied with disabled WC door sign.
The disabled toilet alarm units can be connected to the VIGIL OmniCare system via a BVFREPEM repeater unit and any
number of disabled toilet alarms can be wired to each repeater.
Optional Stainless Steel kit available, featuring a stainless steel reset button and over door light/sounder (controllers
and pull cord white).
Advanced Disabled Refuge Remote
Combined Disabled Refuge/Fire Telephone Remote
Disabled Toilet Alarm ~ Technical Specification
The OmniCare Advance remote unit is specifically designed for use by a
disabled person within a refuge area. It differs significantly to the standard
OmniCare Refuge remotes, both in looks and operation.
Unique to the OmniCare range, this is a unit that has been specially designed
to enable both a disabled remote and a Fire Telephone to be located at one
single ‘call’ position.
Features:
Features:
L Speech Steered.
L Same features as standard Disabled Refuge and Fire Telephone remotes.
L Green finish.
L Designed to enable correct mounting heights as set out in BS5839 Part 9.
L Induction Loop, Braille,Tactile Text and Luminescent Text as standard.
L Only one point of presence at the console.
L System healthy indicator.
BVFREPEM
L Volt free contact, active when occupied.To operate over-door lamps, silence
speaker/sounder etc.
L Call switch.
L Surface or flush mount.
Combined Disabled Refuge and Fire Telephone ~ Technical Specification
L Self-powered from ring circuit.
Power supply
Power consumption (VA)
Weight
Humidity range
Temperature range
Indicators
Dimensions mm – W x H x D
Bezel Dimensions – W x H
Bezel cut out dimensions – W x H
Knockouts
L Reset via button push.
L Typically 20-30 remote units per loop – minimum of two.
Advanced Disabled Refuge Remote ~ Technical Specification
Power supply
Power consumption (VA)
Weight
Humidity range
Temperature range
Indicators
Dimensions Flush mm
Dimensions Surface mount mm
Flush mount cut out dimensions
Knockouts
Power Supply
220-240 V AC
Output
12V DC
Fuse
Internal Thermal
Alarm Type
90dB @ 30cm
Battery Backup
Alkaline – type A23 12 Volt
Dimensions
Alarm controller
145mm H x 85mm x W x 13mm D
Over door light/sounder
85mm H x 85mm x W x 13mm D
Reset point
85mm H x 85mm x W x 13mm D
Ring pull
30mm H x 80mm diameter (fixing centres)
Cable requirements
4 or 6 core security alarm cable 7/0.2 or similar
Back box requirements (Please note: back boxes are not supplied with the disabled toilet alarm).
Alarm controller
35mm deep double gang flush back box or
‘round cornered’ plastic surface box is required
Over door light/sounder
25mm deep single gang flush back box or
‘round cornered’ plastic surface box is required
Reset point
25mm deep single gang flush back box or
‘round cornered’ plastic surface box is required
Ring pull
Supplied with its own surface mount enclosure
12 – 40V DC, self-powered form ring circuit
30mA @ 35V typical
1kg
95% Non-condensing
-10˚C to +40˚C
System Healthy, system activated and in-use
178mm (W) x 440mm (H) x 3mm (D)
180mm (W) x 440mm (H) x 64mm (D)
133mm (W) x 235mm (H) x 65mm (D)
20mm and 25mm diameter in sides of back box
12-40V DC self powered from ring circuit
35mA @ 35V typical
4.5kg
95% Non-condensing
-10˚C to +40˚C
System Healthy and Call Status
130mm x 480 x 100mm
170mm x 520mm
138mm x 486mm
20mm and 25mm in sides of back box
System Requirements
Fire rated enhanced four core cable with a screen must be used for loops. Up to 200m cable run between Remote Units
and Master Control Panel as standard. A repeater unit must be used if distance between remote units exceeds 200m.
BVOCRFCS
BVOCRFC
L A ring circuit configuration must be used to wire the remotes.
L Repeaters are used to connect the Toilet Alarms to the system.
There is incidence of unusually high capacitance of MICC cable and we would ask you to down rate the distances as shown
below.The capacitance of MICC cable varies between manufacturers so if you do have to specify MICC cable and if the
runs are greater than 100 metres, you may wish to contact our technical team to ensure it is within tolerance.
BVOCAF
Visit our web site at:
www.baldwinboxall.co.uk
L Disabled Refuge, Fire Telephone, combined DRS/Fire Telephone and Toilet Alarm Units can be placed
on the same loop.Typically 20-30 remotes per loop.
L MICC lightweight four core with screen: 100m.
For specific technical advice on the system, choice of cabling, cabling design
or any other aspect of the VIGIL range of products, please contact our
Technical Advice Team on: +44 (0) 1892 664422
L MICC heavyweight four core with screen: 200m.
L Enhanced colour coded four core with screen: 200m (recommended by Baldwin Boxall).
+44 (0) 1892 664422
BBC Omnicare A46p AW 0807
18/9/07
09:35
Page 1
The complete Emergency Voice Communication system.
Product Codes
Master Control Panels:
or twenty five years Baldwin Boxall has been at the forefront of the
communications industry and is now widely recognised as being
Europe’s leading independent manufacturer of Voice Alarm/Evacuation,
Fire Telephones, Disabled Refuge Communication and Public Address
Equipment. Continual product development has always been at the heart of
our business philosophy, which is why our research and development
engineers have an outstanding reputation for creating new products, be they
standard or bespoke. Our dedication to providing solutions to emergency
communication needs and on-going commitment to customers, has led
to the development of a sophisticated and versatile Emergency Voice
Communication system;VIGIL OmniCare.
F
THE COMPLETE EMERGENCY
V O I C E C O M M U N I C AT I O N
SYSTEM (EVC)
Mini: BVOC8M~8-way mini, BVOC16M~16-way mini, BVOC32M~32-way mini.
BVCRFB2 8-32 way flush mounting bezel.
Standard: BVOC48~48-way, BVOC64~64-way.
BVCRFB1 16-64 way flush mounting bezel.
Large: BVOC80~80-way, BVOC96~96-way, BVOC112~112-way, BVOC128~128-way.
Stainless steel units available.
VIGIL OmniCare is a fully addressable emergency voice communication system
that allows disabled refuge, fire telephones and disabled toilet alarm remote units
to be connected to just one system. It has been developed in accordance with
BS5588, BS5839 part 9 and BS8300:2001 (for the Disabled Toilet Alarm).
Remote Units:
Disabled Refuge: BVOCECP~standard red unit, BVOCECPS~stainless steel unit.
Flush Mounting Bezels: BVCRMRED~for BVOCECP and BVCRMSS~for BVOCECPS.
The system has two main components; a Master Control Panel and the Remote
units.The Master Control Panel is available in various options: 8~128 way.
Control panels also function as slave panels when wired into a VIGIL OmniCare
system on the ring circuit loop.The Master Control Panel is normally wall
mounted within a central control room, with additional panels at other locations
for control of local areas, e.g. in a stairwell or fallback position.The remote units
are supplied in four different styles: Disabled Refuge, Fire Telephone, Disabled
Toilet Alarm and combined Disabled Refuge/Fire telephone.
Advanced Disabled Refuge: BVOCAS~standard surface mounting and BVOCAF~flush mounting.
Fire Telephone: BVFH~red push door, BVFHL~red slot lock, BVFHB~red push door & beacon,
BVFHLB~red slot lock & beacon. Stainless steel enclosures and bezels are made to order. Please ring for details.
Flush Mounting Bezels: BVFHBEZ.
BVOC128~128 way
Master Control Panel
Combined DRS and Fire Telephone:
Push door: BVOCRFC~red unit, BVOCRFXB~red unit with beacon, BVOCRFCS~stainless steel unit
Locking door: BVOCRFCL~red unit, BVOCRFCLXB~red unit with beacon, BVOCRFCSL~stainless steel unit.
Flush mounting bezel available.
Disabled Toilet Alarm: BVOCDTA~disabled toilet alarm kit, BVOCDTAS~stainless steel.
Full system monitoring for functionality is standard with VIGIL OmniCare and
faults are reported at the Master Control Panels.The system has been designed
with functionality and practicality equally in mind.
Repeater Unit: BVFREPEM.
Features:
For specific technical advice on the system, choice of cabling, cabling design
or any other aspect of the VIGIL range of products, please contact our
Technical Advice Team on: +44 (0) 1892 664422
L Up to 128 way, constructed in 16 way switch boards.
L Fully addressable.
L Link to fire detection system to prevent hoax disabled refuge calls (Disabled
Toilet Alarms and Fire Telephones remain active).
L Up to 128 master panels can be linked in one system.
L Wall mountable ~ optional flush mounting with bezel (see below).
L Lockable glazed door.
L Speech steered (DRS remotes) and Full duplex (Fire telephones) speech.
BVOC64~64 way
L Fully monitored ~ faults reported at the Master Control Panel.
L Battery backed ~ 24 hour quiescent with 3 hours full use, 230V AC with
built-in battery charger.
L Volt free contact ~ operated when in fault, set during installation.
L Indicators for: in use/occupied, call, fault, power, charger and speech volume.
L ‘Listening’ facility.
B A L D W I N B O X A L L C O M M U N I C AT I O N S L I M I T E D
We a l d e n I n d u s t r i a l E s t a t e
Farningham Road . Jar vis Brook
Crowborough . East Sussex . TN6 2JR . UK
L Fully BS5588 Part 11, BS5839 part 9 and BS8300 compliant, when installed
according to both standards.
L Distinguishing ‘Orange’ name panel.
BVOC32~32 way
Te l : + 4 4 ( 0 ) 1 8 9 2 6 6 4 4 2 2
Fax: +44 (0) 1892 663146
e-mail: mail@baldwinboxall.co.uk
website: www.baldwinboxall.co.uk
OmniCare Control Unit ~ Technical Specification
Power supply
Power consumption (VA)
Weight
Humidity range
Temperature range
Indicators
Remote signalling of fault
Dimensions mm – W x H x D
Bezel Dimensions – W x H x D
Bezel cut out dimensions – W x H
Knockouts
230V AC
10VA + 1VA per remote handset connected
21kg up to 32way, 26kg up to 64way, 37kg up to 128way units.
95% Non-condensing
-10˚C to +30˚C
In-use, call, fault, power, charger and speech volume
Volt-free contact, closing/opening set on commissioning
410mm (W) x 290mm (H) x 200mm (D) (8~32 Way)
410mm (W) x 455mm (H) x 200mm (D) (16~64 Way)
410mm (W) x 777mm (H) x 200mm (D) (80~128 Way)
461mm (W) x 340mm (H) x 25mm (D) (8~32 Way)
461mm (W) x 506mm (H) x 25mm (D) (16~64 Way)
420mm (W) x 300mm (H) (8~32 Way)
420mm (W) x 465mm (H) (16~64 Way)
20mm diameter in top and rear
+44 (0) 1892 664422
THE
Cert No. FM41357
COMPLETE
SPECTRUM
OF
C O M M U N I C AT I O N
SOLUTIONS
Low Voltage Directive 73/23/EEC as amended by 93/68/EEC
EMC Directive 89/336/EEC as amended by 92/31/EEC and 93/68/EEC
Applies only when the items are correctly fitted and operated in or with products of our manufacture
and are installed in a recommended enclosure.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising