2014-acura-mdx-atf
INSTALLATION
INSTRUCTIONS
PARTS LIST
Accessory
Application
ATF COOLER
P/N 06255-5J8-326
2014 MDX
Publications No.
BII 49569
Issue Date
JUNE 2013
Flange Bolt (6x12)
ATF Cooler
Tag
Support Bracket
INSTALLATION
ATF Hose
Client Information: The information in this installation
instruction is intended for use only by skilled
technicians who have the proper tools, equipment, and
training to correctly and safely add equipment to your
vehicle. These procedures should not be attempted by
“do-it-yourselfers.”
NOTE: Allow the engine and transmission to cool down
before installing the ATF cooler.
1.
Washer Bolt (3) (6x20)
Remove the front bulkhead cover, the resonator, and
the intake air guide.
FRONT BULKHEAD COVER
Washer Bolt (6x16)
RESONATOR
INTAKE
AIR GUIDE
Nut
© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
BII 49569 (1306)
1 of 3
2.
Remove the splash shield, and fold down the front
bumper skid trim lower flap.
4.
FRONT BUMPER
SKID TRIM
Slide the ATF cooler assembly down in front of the
radiator as shown.
ATF COOLER ASSEMBLY
Fold down
the lower
flap.
5.
SPLASH SHIELD
Remove.
3.
Using the 6x16 washer bolt and the nut from the kit,
install the center mount support bracket as shown.
CENTER MOUNT
SUPPORT BRACKET
NUT
2 of 3
Install the ATF cooler with the three 6x20 washer
bolts into the threaded holes in the front bulkhead
and the center mount support bracket.
CENTER MOUNT
SUPPORT BRACKET
BOLT
RADIATOR
FRONT SUBFRAME
FRONT SUBFRAME
BII 49569 (1306)
© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
6.
Install the ATF pipe assembly bracket to the vehicles
frame with the new 6x12 flange bolt.
ATF PIPE
ASSEMBLY
7.
Remove the ATF filter hose and discard it. Then
connect the upper ATF assembly hose to the ATF
pipe, and the lower ATF assembly hose to the ATF
filter as shown.
ATF PIPE
ASSEMBLY HOSES
TRANSMISSION
Connect to transmission.
ATF COOLER
ASSEMBLY HOSES
ATF PIPE
ATF FILTER
Connect to ATF
pipe assembly.
ATF FILTER
HOSE
Remove.
8.
Reinstall all removed parts.
9.
Inspect the ATF fluid and adjust as required.
10. Install the hang-tag around the rear view mirror.
© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
BII 49569 (1306)
3 of 3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising