Credenza Projector Lift The Credenza Lift conceals your projector in a credenza, cabinet, or table and raises it quickly and quietly into position when it’s time for a conference to begin. When concealed, your projector is protected and out of the way. Features 12” (30 cm) vertical travel and a tiny footprint, making it easy to install in virtually any conference room furnishings. Interior shelf height is adjustable. Required opening in furnishing top is lift shelf size (width and depth) + 1/2” (12 mm). Features • Features 12” (30 cm) vertical travel and a tiny footprint, making it easy to install in virtually any conference room furnishings • Interior shelf height is adjustable • Required opening in furnishing top is lift shelf size (width and depth) + 1/2” (12 mm) • Includes single wall switch • Warranted for one year against defects in materials and workmanship Options • Available with 110v or 220v motor and controls • Controls—Can be furnished with these control options • Custom sizes available Dimensions • Interior shelf dimensions are 20”W x 10”H x 20”D (51 cm W x 25 cm H x 51 cm D), shipping wieght is 30 lbs. (14 kg) Supporting Documents All instructions, technical drawings and other supporting documents are located at http://www.draperinc.com/Documents.aspx in our document library. For more information on this product visit: www.draperinc.com/go/CredenzaProjectorLift.htm © 2014 Draper, Inc. All rights reserved.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project